diff options
Diffstat (limited to 'drivers/net/wireless/b43legacy/b43legacy.h')
| -rw-r--r-- | drivers/net/wireless/b43legacy/b43legacy.h | 829 |
1 files changed, 829 insertions, 0 deletions
diff --git a/drivers/net/wireless/b43legacy/b43legacy.h b/drivers/net/wireless/b43legacy/b43legacy.h new file mode 100644 index 00000000000..34a6277051a --- /dev/null +++ b/drivers/net/wireless/b43legacy/b43legacy.h @@ -0,0 +1,829 @@ +#ifndef B43legacy_H_ +#define B43legacy_H_ + +#include <linux/hw_random.h> +#include <linux/kernel.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/stringify.h> +#include <linux/netdevice.h> +#include <linux/pci.h> +#include <asm/atomic.h> +#include <linux/io.h> + +#include <linux/ssb/ssb.h> +#include <linux/ssb/ssb_driver_chipcommon.h> + +#include <linux/wireless.h> +#include <net/mac80211.h> + +#include "debugfs.h" +#include "leds.h" +#include "phy.h" + + +#define B43legacy_IRQWAIT_MAX_RETRIES 100 + +#define B43legacy_RX_MAX_SSI 60 /* best guess at max ssi */ + +/* MMIO offsets */ +#define B43legacy_MMIO_DMA0_REASON 0x20 +#define B43legacy_MMIO_DMA0_IRQ_MASK 0x24 +#define B43legacy_MMIO_DMA1_REASON 0x28 +#define B43legacy_MMIO_DMA1_IRQ_MASK 0x2C +#define B43legacy_MMIO_DMA2_REASON 0x30 +#define B43legacy_MMIO_DMA2_IRQ_MASK 0x34 +#define B43legacy_MMIO_DMA3_REASON 0x38 +#define B43legacy_MMIO_DMA3_IRQ_MASK 0x3C +#define B43legacy_MMIO_DMA4_REASON 0x40 +#define B43legacy_MMIO_DMA4_IRQ_MASK 0x44 +#define B43legacy_MMIO_DMA5_REASON 0x48 +#define B43legacy_MMIO_DMA5_IRQ_MASK 0x4C +#define B43legacy_MMIO_MACCTL 0x120 +#define B43legacy_MMIO_STATUS_BITFIELD 0x120 +#define B43legacy_MMIO_STATUS2_BITFIELD 0x124 +#define B43legacy_MMIO_GEN_IRQ_REASON 0x128 +#define B43legacy_MMIO_GEN_IRQ_MASK 0x12C +#define B43legacy_MMIO_RAM_CONTROL 0x130 +#define B43legacy_MMIO_RAM_DATA 0x134 +#define B43legacy_MMIO_PS_STATUS 0x140 +#define B43legacy_MMIO_RADIO_HWENABLED_HI 0x158 +#define B43legacy_MMIO_SHM_CONTROL 0x160 +#define B43legacy_MMIO_SHM_DATA 0x164 +#define B43legacy_MMIO_SHM_DATA_UNALIGNED 0x166 +#define B43legacy_MMIO_XMITSTAT_0 0x170 +#define B43legacy_MMIO_XMITSTAT_1 0x174 +#define B43legacy_MMIO_REV3PLUS_TSF_LOW 0x180 /* core rev >= 3 only */ +#define B43legacy_MMIO_REV3PLUS_TSF_HIGH 0x184 /* core rev >= 3 only */ + +/* 32-bit DMA */ +#define B43legacy_MMIO_DMA32_BASE0 0x200 +#define B43legacy_MMIO_DMA32_BASE1 0x220 +#define B43legacy_MMIO_DMA32_BASE2 0x240 +#define B43legacy_MMIO_DMA32_BASE3 0x260 +#define B43legacy_MMIO_DMA32_BASE4 0x280 +#define B43legacy_MMIO_DMA32_BASE5 0x2A0 +/* 64-bit DMA */ +#define B43legacy_MMIO_DMA64_BASE0 0x200 +#define B43legacy_MMIO_DMA64_BASE1 0x240 +#define B43legacy_MMIO_DMA64_BASE2 0x280 +#define B43legacy_MMIO_DMA64_BASE3 0x2C0 +#define B43legacy_MMIO_DMA64_BASE4 0x300 +#define B43legacy_MMIO_DMA64_BASE5 0x340 +/* PIO */ +#define B43legacy_MMIO_PIO1_BASE 0x300 +#define B43legacy_MMIO_PIO2_BASE 0x310 +#define B43legacy_MMIO_PIO3_BASE 0x320 +#define B43legacy_MMIO_PIO4_BASE 0x330 + +#define B43legacy_MMIO_PHY_VER 0x3E0 +#define B43legacy_MMIO_PHY_RADIO 0x3E2 +#define B43legacy_MMIO_PHY0 0x3E6 +#define B43legacy_MMIO_ANTENNA 0x3E8 +#define B43legacy_MMIO_CHANNEL 0x3F0 +#define B43legacy_MMIO_CHANNEL_EXT 0x3F4 +#define B43legacy_MMIO_RADIO_CONTROL 0x3F6 +#define B43legacy_MMIO_RADIO_DATA_HIGH 0x3F8 +#define B43legacy_MMIO_RADIO_DATA_LOW 0x3FA +#define B43legacy_MMIO_PHY_CONTROL 0x3FC +#define B43legacy_MMIO_PHY_DATA 0x3FE +#define B43legacy_MMIO_MACFILTER_CONTROL 0x420 +#define B43legacy_MMIO_MACFILTER_DATA 0x422 +#define B43legacy_MMIO_RCMTA_COUNT 0x43C /* Receive Match Transmitter Addr */ +#define B43legacy_MMIO_RADIO_HWENABLED_LO 0x49A +#define B43legacy_MMIO_GPIO_CONTROL 0x49C +#define B43legacy_MMIO_GPIO_MASK 0x49E +#define B43legacy_MMIO_TSF_0 0x632 /* core rev < 3 only */ +#define B43legacy_MMIO_TSF_1 0x634 /* core rev < 3 only */ +#define B43legacy_MMIO_TSF_2 0x636 /* core rev < 3 only */ +#define B43legacy_MMIO_TSF_3 0x638 /* core rev < 3 only */ +#define B43legacy_MMIO_RNG 0x65A +#define B43legacy_MMIO_POWERUP_DELAY 0x6A8 + +/* SPROM boardflags_lo values */ +#define B43legacy_BFL_PACTRL 0x0002 +#define B43legacy_BFL_RSSI 0x0008 +#define B43legacy_BFL_EXTLNA 0x1000 + +/* GPIO register offset, in both ChipCommon and PCI core. */ +#define B43legacy_GPIO_CONTROL 0x6c + +/* SHM Routing */ +#define B43legacy_SHM_SHARED 0x0001 +#define B43legacy_SHM_WIRELESS 0x0002 +#define B43legacy_SHM_HW 0x0004 +#define B43legacy_SHM_UCODE 0x0300 + +/* SHM Routing modifiers */ +#define B43legacy_SHM_AUTOINC_R 0x0200 /* Read Auto-increment */ +#define B43legacy_SHM_AUTOINC_W 0x0100 /* Write Auto-increment */ +#define B43legacy_SHM_AUTOINC_RW (B43legacy_SHM_AUTOINC_R | \ + B43legacy_SHM_AUTOINC_W) + +/* Misc SHM_SHARED offsets */ +#define B43legacy_SHM_SH_WLCOREREV 0x0016 /* 802.11 core revision */ +#define B43legacy_SHM_SH_HOSTFLO 0x005E /* Hostflags ucode opts (low) */ +#define B43legacy_SHM_SH_HOSTFHI 0x0060 /* Hostflags ucode opts (high) */ +/* SHM_SHARED crypto engine */ +#define B43legacy_SHM_SH_KEYIDXBLOCK 0x05D4 /* Key index/algorithm block */ +/* SHM_SHARED beacon variables */ +#define B43legacy_SHM_SH_BEACPHYCTL 0x0054 /* Beacon PHY TX control word */ +/* SHM_SHARED ACK/CTS control */ +#define B43legacy_SHM_SH_ACKCTSPHYCTL 0x0022 /* ACK/CTS PHY control word */ +/* SHM_SHARED probe response variables */ +#define B43legacy_SHM_SH_PRPHYCTL 0x0188 /* Probe Resp PHY TX control */ +#define B43legacy_SHM_SH_PRMAXTIME 0x0074 /* Probe Response max time */ +/* SHM_SHARED rate tables */ +/* SHM_SHARED microcode soft registers */ +#define B43legacy_SHM_SH_UCODEREV 0x0000 /* Microcode revision */ +#define B43legacy_SHM_SH_UCODEPATCH 0x0002 /* Microcode patchlevel */ +#define B43legacy_SHM_SH_UCODEDATE 0x0004 /* Microcode date */ +#define B43legacy_SHM_SH_UCODETIME 0x0006 /* Microcode time */ + +#define B43legacy_UCODEFLAGS_OFFSET 0x005E + +/* Hardware Radio Enable masks */ +#define B43legacy_MMIO_RADIO_HWENABLED_HI_MASK (1 << 16) +#define B43legacy_MMIO_RADIO_HWENABLED_LO_MASK (1 << 4) + +/* HostFlags. See b43legacy_hf_read/write() */ +#define B43legacy_HF_SYMW 0x00000002 /* G-PHY SYM workaround */ +#define B43legacy_HF_GDCW 0x00000020 /* G-PHY DV cancel filter */ +#define B43legacy_HF_OFDMPABOOST 0x00000040 /* Enable PA boost OFDM */ +#define B43legacy_HF_EDCF 0x00000100 /* on if WME/MAC suspended */ + +/* MacFilter offsets. */ +#define B43legacy_MACFILTER_SELF 0x0000 +#define B43legacy_MACFILTER_BSSID 0x0003 +#define B43legacy_MACFILTER_MAC 0x0010 + +/* PHYVersioning */ +#define B43legacy_PHYTYPE_B 0x01 +#define B43legacy_PHYTYPE_G 0x02 + +/* PHYRegisters */ +#define B43legacy_PHY_G_LO_CONTROL 0x0810 +#define B43legacy_PHY_ILT_G_CTRL 0x0472 +#define B43legacy_PHY_ILT_G_DATA1 0x0473 +#define B43legacy_PHY_ILT_G_DATA2 0x0474 +#define B43legacy_PHY_G_PCTL 0x0029 +#define B43legacy_PHY_RADIO_BITFIELD 0x0401 +#define B43legacy_PHY_G_CRS 0x0429 +#define B43legacy_PHY_NRSSILT_CTRL 0x0803 +#define B43legacy_PHY_NRSSILT_DATA 0x0804 + +/* RadioRegisters */ +#define B43legacy_RADIOCTL_ID 0x01 + +/* MAC Control bitfield */ +#define B43legacy_MACCTL_IHR_ENABLED 0x00000400 /* IHR Region Enabled */ +#define B43legacy_MACCTL_INFRA 0x00020000 /* Infrastructure mode */ +#define B43legacy_MACCTL_AP 0x00040000 /* AccessPoint mode */ +#define B43legacy_MACCTL_KEEP_BADPLCP 0x00200000 /* Keep bad PLCP frames */ +#define B43legacy_MACCTL_KEEP_CTL 0x00400000 /* Keep control frames */ +#define B43legacy_MACCTL_KEEP_BAD 0x00800000 /* Keep bad frames (FCS) */ +#define B43legacy_MACCTL_PROMISC 0x01000000 /* Promiscuous mode */ +#define B43legacy_MACCTL_GMODE 0x80000000 /* G Mode */ + +/* StatusBitField */ +#define B43legacy_SBF_MAC_ENABLED 0x00000001 +#define B43legacy_SBF_CORE_READY 0x00000004 +#define B43legacy_SBF_400 0x00000400 /*FIXME: fix name*/ +#define B43legacy_SBF_XFER_REG_BYTESWAP 0x00010000 +#define B43legacy_SBF_MODE_NOTADHOC 0x00020000 +#define B43legacy_SBF_MODE_AP 0x00040000 +#define B43legacy_SBF_RADIOREG_LOCK 0x00080000 +#define B43legacy_SBF_MODE_MONITOR 0x00400000 +#define B43legacy_SBF_MODE_PROMISC 0x01000000 +#define B43legacy_SBF_PS1 0x02000000 +#define B43legacy_SBF_PS2 0x04000000 +#define B43legacy_SBF_NO_SSID_BCAST 0x08000000 +#define B43legacy_SBF_TIME_UPDATE 0x10000000 + +/* 802.11 core specific TM State Low flags */ +#define B43legacy_TMSLOW_GMODE 0x20000000 /* G Mode Enable */ +#define B43legacy_TMSLOW_PLLREFSEL 0x00200000 /* PLL Freq Ref Select */ +#define B43legacy_TMSLOW_MACPHYCLKEN 0x00100000 /* MAC PHY Clock Ctrl Enbl */ +#define B43legacy_TMSLOW_PHYRESET 0x00080000 /* PHY Reset */ +#define B43legacy_TMSLOW_PHYCLKEN 0x00040000 /* PHY Clock Enable */ + +/* 802.11 core specific TM State High flags */ +#define B43legacy_TMSHIGH_FCLOCK 0x00040000 /* Fast Clock Available */ +#define B43legacy_TMSHIGH_GPHY 0x00010000 /* G-PHY avail (rev >= 5) */ + +#define B43legacy_UCODEFLAG_AUTODIV 0x0001 + +/* Generic-Interrupt reasons. */ +#define B43legacy_IRQ_MAC_SUSPENDED 0x00000001 +#define B43legacy_IRQ_BEACON 0x00000002 +#define B43legacy_IRQ_TBTT_INDI 0x00000004 /* Target Beacon Transmit Time */ +#define B43legacy_IRQ_BEACON_TX_OK 0x00000008 +#define B43legacy_IRQ_BEACON_CANCEL 0x00000010 +#define B43legacy_IRQ_ATIM_END 0x00000020 +#define B43legacy_IRQ_PMQ 0x00000040 +#define B43legacy_IRQ_PIO_WORKAROUND 0x00000100 +#define B43legacy_IRQ_MAC_TXERR 0x00000200 +#define B43legacy_IRQ_PHY_TXERR 0x00000800 +#define B43legacy_IRQ_PMEVENT 0x00001000 +#define B43legacy_IRQ_TIMER0 0x00002000 +#define B43legacy_IRQ_TIMER1 0x00004000 +#define B43legacy_IRQ_DMA 0x00008000 +#define B43legacy_IRQ_TXFIFO_FLUSH_OK 0x00010000 +#define B43legacy_IRQ_CCA_MEASURE_OK 0x00020000 +#define B43legacy_IRQ_NOISESAMPLE_OK 0x00040000 +#define B43legacy_IRQ_UCODE_DEBUG 0x08000000 +#define B43legacy_IRQ_RFKILL 0x10000000 +#define B43legacy_IRQ_TX_OK 0x20000000 +#define B43legacy_IRQ_PHY_G_CHANGED 0x40000000 +#define B43legacy_IRQ_TIMEOUT 0x80000000 + +#define B43legacy_IRQ_ALL 0xFFFFFFFF +#define B43legacy_IRQ_MASKTEMPLATE (B43legacy_IRQ_MAC_SUSPENDED | \ + B43legacy_IRQ_BEACON | \ + B43legacy_IRQ_TBTT_INDI | \ + B43legacy_IRQ_ATIM_END | \ + B43legacy_IRQ_PMQ | \ + B43legacy_IRQ_MAC_TXERR | \ + B43legacy_IRQ_PHY_TXERR | \ + B43legacy_IRQ_DMA | \ + B43legacy_IRQ_TXFIFO_FLUSH_OK | \ + B43legacy_IRQ_NOISESAMPLE_OK | \ + B43legacy_IRQ_UCODE_DEBUG | \ + B43legacy_IRQ_RFKILL | \ + B43legacy_IRQ_TX_OK) + +/* Device specific rate values. + * The actual values defined here are (rate_in_mbps * 2). + * Some code depends on this. Don't change it. */ +#define B43legacy_CCK_RATE_1MB 2 +#define B43legacy_CCK_RATE_2MB 4 +#define B43legacy_CCK_RATE_5MB 11 +#define B43legacy_CCK_RATE_11MB 22 +#define B43legacy_OFDM_RATE_6MB 12 +#define B43legacy_OFDM_RATE_9MB 18 +#define B43legacy_OFDM_RATE_12MB 24 +#define B43legacy_OFDM_RATE_18MB 36 +#define B43legacy_OFDM_RATE_24MB 48 +#define B43legacy_OFDM_RATE_36MB 72 +#define B43legacy_OFDM_RATE_48MB 96 +#define B43legacy_OFDM_RATE_54MB 108 +/* Convert a b43legacy rate value to a rate in 100kbps */ +#define B43legacy_RATE_TO_100KBPS(rate) (((rate) * 10) / 2) + + +#define B43legacy_DEFAULT_SHORT_RETRY_LIMIT 7 +#define B43legacy_DEFAULT_LONG_RETRY_LIMIT 4 + +/* Max size of a security key */ +#define B43legacy_SEC_KEYSIZE 16 +/* Security algorithms. */ +enum { + B43legacy_SEC_ALGO_NONE = 0, /* unencrypted, as of TX header. */ + B43legacy_SEC_ALGO_WEP40, + B43legacy_SEC_ALGO_TKIP, + B43legacy_SEC_ALGO_AES, + B43legacy_SEC_ALGO_WEP104, + B43legacy_SEC_ALGO_AES_LEGACY, +}; + +/* Core Information Registers */ +#define B43legacy_CIR_BASE 0xf00 +#define B43legacy_CIR_SBTPSFLAG (B43legacy_CIR_BASE + 0x18) +#define B43legacy_CIR_SBIMSTATE (B43legacy_CIR_BASE + 0x90) +#define B43legacy_CIR_SBINTVEC (B43legacy_CIR_BASE + 0x94) +#define B43legacy_CIR_SBTMSTATELOW (B43legacy_CIR_BASE + 0x98) +#define B43legacy_CIR_SBTMSTATEHIGH (B43legacy_CIR_BASE + 0x9c) +#define B43legacy_CIR_SBIMCONFIGLOW (B43legacy_CIR_BASE + 0xa8) +#define B43legacy_CIR_SB_ID_HI (B43legacy_CIR_BASE + 0xfc) + +/* sbtmstatehigh state flags */ +#define B43legacy_SBTMSTATEHIGH_SERROR 0x00000001 +#define B43legacy_SBTMSTATEHIGH_BUSY 0x00000004 +#define B43legacy_SBTMSTATEHIGH_TIMEOUT 0x00000020 +#define B43legacy_SBTMSTATEHIGH_G_PHY_AVAIL 0x00010000 +#define B43legacy_SBTMSTATEHIGH_COREFLAGS 0x1FFF0000 +#define B43legacy_SBTMSTATEHIGH_DMA64BIT 0x10000000 +#define B43legacy_SBTMSTATEHIGH_GATEDCLK 0x20000000 +#define B43legacy_SBTMSTATEHIGH_BISTFAILED 0x40000000 +#define B43legacy_SBTMSTATEHIGH_BISTCOMPLETE 0x80000000 + +/* sbimstate flags */ +#define B43legacy_SBIMSTATE_IB_ERROR 0x20000 +#define B43legacy_SBIMSTATE_TIMEOUT 0x40000 + +#define PFX KBUILD_MODNAME ": " +#ifdef assert +# undef assert +#endif +#ifdef CONFIG_B43LEGACY_DEBUG +# define B43legacy_WARN_ON(expr) \ + do { \ + if (unlikely((expr))) { \ + printk(KERN_INFO PFX "Test (%s) failed at:" \ + " %s:%d:%s()\n", \ + #expr, __FILE__, \ + __LINE__, __FUNCTION__); \ + } \ + } while (0) +# define B43legacy_BUG_ON(expr) \ + do { \ + if (unlikely((expr))) { \ + printk(KERN_INFO PFX "Test (%s) failed\n", \ + #expr); \ + BUG_ON(expr); \ + } \ + } while (0) +# define B43legacy_DEBUG 1 +#else +# define B43legacy_WARN_ON(x) do { /* nothing */ } while (0) +# define B43legacy_BUG_ON(x) do { /* nothing */ } while (0) +# define B43legacy_DEBUG 0 +#endif + + +struct net_device; +struct pci_dev; +struct b43legacy_dmaring; +struct b43legacy_pioqueue; + +/* The firmware file header */ +#define B43legacy_FW_TYPE_UCODE 'u' +#define B43legacy_FW_TYPE_PCM 'p' +#define B43legacy_FW_TYPE_IV 'i' +struct b43legacy_fw_header { + /* File type */ + u8 type; + /* File format version */ + u8 ver; + u8 __padding[2]; + /* Size of the data. For ucode and PCM this is in bytes. + * For IV this is number-of-ivs. */ + __be32 size; +} __attribute__((__packed__)); + +/* Initial Value file format */ +#define B43legacy_IV_OFFSET_MASK 0x7FFF +#define B43legacy_IV_32BIT 0x8000 +struct b43legacy_iv { + __be16 offset_size; + union { + __be16 d16; + __be32 d32; + } data __attribute__((__packed__)); +} __attribute__((__packed__)); + +#define B43legacy_PHYMODE(phytype) (1 << (phytype)) +#define B43legacy_PHYMODE_B B43legacy_PHYMODE \ + ((B43legacy_PHYTYPE_B)) +#define B43legacy_PHYMODE_G B43legacy_PHYMODE \ + ((B43legacy_PHYTYPE_G)) + +/* Value pair to measure the LocalOscillator. */ +struct b43legacy_lopair { + s8 low; + s8 high; + u8 used:1; +}; +#define B43legacy_LO_COUNT (14*4) + +struct b43legacy_phy { + /* Possible PHYMODEs on this PHY */ + u8 possible_phymodes; + /* GMODE bit enabled in MACCTL? */ + bool gmode; + /* Possible ieee80211 subsystem hwmodes for this PHY. + * Which mode is selected, depends on thr GMODE enabled bit */ +#define B43legacy_MAX_PHYHWMODES 2 + struct ieee80211_hw_mode hwmodes[B43legacy_MAX_PHYHWMODES]; + + /* Analog Type */ + u8 analog; + /* B43legacy_PHYTYPE_ */ + u8 type; + /* PHY revision number. */ + u8 rev; + + u16 antenna_diversity; + u16 savedpctlreg; + /* Radio versioning */ + u16 radio_manuf; /* Radio manufacturer */ + u16 radio_ver; /* Radio version */ + u8 calibrated:1; + u8 radio_rev; /* Radio revision */ + + bool radio_on; /* Radio switched on/off */ + bool locked; /* Only used in b43legacy_phy_{un}lock() */ + bool dyn_tssi_tbl; /* tssi2dbm is kmalloc()ed. */ + + /* ACI (adjacent channel interference) flags. */ + bool aci_enable; + bool aci_wlan_automatic; + bool aci_hw_rssi; + + u16 minlowsig[2]; + u16 minlowsigpos[2]; + + /* LO Measurement Data. + * Use b43legacy_get_lopair() to get a value. + */ + struct b43legacy_lopair *_lo_pairs; + /* TSSI to dBm table in use */ + const s8 *tssi2dbm; + /* idle TSSI value */ + s8 idle_tssi; + /* Target idle TSSI */ + int tgt_idle_tssi; + /* Current idle TSSI */ + int cur_idle_tssi; + + /* LocalOscillator control values. */ + struct b43legacy_txpower_lo_control *lo_control; + /* Values from b43legacy_calc_loopback_gain() */ + s16 max_lb_gain; /* Maximum Loopback gain in hdB */ + s16 trsw_rx_gain; /* TRSW RX gain in hdB */ + s16 lna_lod_gain; /* LNA lod */ + s16 lna_gain; /* LNA */ + s16 pga_gain; /* PGA */ + + /* PHY lock for core.rev < 3 + * This lock is only used by b43legacy_phy_{un}lock() + */ + spinlock_t lock; + + /* Desired TX power level (in dBm). This is set by the user and + * adjusted in b43legacy_phy_xmitpower(). */ + u8 power_level; + + /* Values from b43legacy_calc_loopback_gain() */ + u16 loopback_gain[2]; + + /* TX Power control values. */ + /* B/G PHY */ + struct { + /* Current Radio Attenuation for TXpower recalculation. */ + u16 rfatt; + /* Current Baseband Attenuation for TXpower recalculation. */ + u16 bbatt; + /* Current TXpower control value for TXpower recalculation. */ + u16 txctl1; + u16 txctl2; + }; + /* A PHY */ + struct { + u16 txpwr_offset; + }; + +#ifdef CONFIG_B43LEGACY_DEBUG + bool manual_txpower_control; /* Manual TX-power control enabled? */ +#endif + /* Current Interference Mitigation mode */ + int interfmode; + /* Stack of saved values from the Interference Mitigation code. + * Each value in the stack is layed out as follows: + * bit 0-11: offset + * bit 12-15: register ID + * bit 16-32: value + * register ID is: 0x1 PHY, 0x2 Radio, 0x3 ILT + */ +#define B43legacy_INTERFSTACK_SIZE 26 + u32 interfstack[B43legacy_INTERFSTACK_SIZE]; + + /* Saved values from the NRSSI Slope calculation */ + s16 nrssi[2]; + s32 nrssislope; + /* In memory nrssi lookup table. */ + s8 nrssi_lt[64]; + + /* current channel */ + u8 channel; + + u16 lofcal; + + u16 initval; +}; + +/* Data structures for DMA transmission, per 80211 core. */ +struct b43legacy_dma { + struct b43legacy_dmaring *tx_ring0; + struct b43legacy_dmaring *tx_ring1; + struct b43legacy_dmaring *tx_ring2; + struct b43legacy_dmaring *tx_ring3; + struct b43legacy_dmaring *tx_ring4; + struct b43legacy_dmaring *tx_ring5; + + struct b43legacy_dmaring *rx_ring0; + struct b43legacy_dmaring *rx_ring3; /* only on core.rev < 5 */ +}; + +/* Data structures for PIO transmission, per 80211 core. */ +struct b43legacy_pio { + struct b43legacy_pioqueue *queue0; + struct b43legacy_pioqueue *queue1; + struct b43legacy_pioqueue *queue2; + struct b43legacy_pioqueue *queue3; +}; + +/* Context information for a noise calculation (Link Quality). */ +struct b43legacy_noise_calculation { + u8 channel_at_start; + bool calculation_running; + u8 nr_samples; + s8 samples[8][4]; +}; + +struct b43legacy_stats { + u8 link_noise; + /* Store the last TX/RX times here for updating the leds. */ + unsigned long last_tx; + unsigned long last_rx; +}; + +struct b43legacy_key { + void *keyconf; + bool enabled; + u8 algorithm; +}; + +struct b43legacy_wldev; + +/* Data structure for the WLAN parts (802.11 cores) of the b43legacy chip. */ +struct b43legacy_wl { + /* Pointer to the active wireless device on this chip */ + struct b43legacy_wldev *current_dev; + /* Pointer to the ieee80211 hardware data structure */ + struct ieee80211_hw *hw; + + spinlock_t irq_lock; /* locks IRQ */ + struct mutex mutex; /* locks wireless core state */ + spinlock_t leds_lock; /* lock for leds */ + + /* We can only have one operating interface (802.11 core) + * at a time. General information about this interface follows. + */ + + /* Opaque ID of the operating interface (!= monitor + * interface) from the ieee80211 subsystem. + * Do not modify. + */ + int if_id; + /* MAC address (can be NULL). */ + const u8 *mac_addr; + /* Current BSSID (can be NULL). */ + const u8 *bssid; + /* Interface type. (IEEE80211_IF_TYPE_XXX) */ + int if_type; + /* Counter of active monitor interfaces. */ + int monitor; + /* Is the card operating in AP, STA or IBSS mode? */ + bool operating; + /* Promisc mode active? + * Note that (monitor != 0) implies promisc. + */ + bool promisc; + /* Stats about the wireless interface */ + struct ieee80211_low_level_stats ieee_stats; + + struct hwrng rng; + u8 rng_initialized; + char rng_name[30 + 1]; + + /* List of all wireless devices on this chip */ + struct list_head devlist; + u8 nr_devs; +}; + +/* Pointers to the firmware data and meta information about it. */ +struct b43legacy_firmware { + /* Microcode */ + const struct firmware *ucode; + /* PCM code */ + const struct firmware *pcm; + /* Initial MMIO values for the firmware */ + const struct firmware *initvals; + /* Initial MMIO values for the firmware, band-specific */ + const struct firmware *initvals_band; + /* Firmware revision */ + u16 rev; + /* Firmware patchlevel */ + u16 patch; +}; + +/* Device (802.11 core) initialization status. */ +enum { + B43legacy_STAT_UNINIT = 0, /* Uninitialized. */ + B43legacy_STAT_INITIALIZED = 1, /* Initialized, not yet started. */ + B43legacy_STAT_STARTED = 2, /* Up and running. */ +}; +#define b43legacy_status(wldev) atomic_read(&(wldev)->__init_status) +#define b43legacy_set_status(wldev, stat) do { \ + atomic_set(&(wldev)->__init_status, (stat)); \ + smp_wmb(); \ + } while (0) + +/* *** --- HOW LOCKING WORKS IN B43legacy --- *** + * + * You should always acquire both, wl->mutex and wl->irq_lock unless: + * - You don't need to acquire wl->irq_lock, if the interface is stopped. + * - You don't need to acquire wl->mutex in the IRQ handler, IRQ tasklet + * and packet TX path (and _ONLY_ there.) + */ + +/* Data structure for one wireless device (802.11 core) */ +struct b43legacy_wldev { + struct ssb_device *dev; + struct b43legacy_wl *wl; + + /* The device initialization status. + * Use b43legacy_status() to query. */ + atomic_t __init_status; + /* Saved init status for handling suspend. */ + int suspend_init_status; + + bool __using_pio; /* Using pio rather than dma. */ + bool bad_frames_preempt;/* Use "Bad Frames Preemption". */ + bool reg124_set_0x4; /* Variable to keep track of IRQ. */ + bool short_preamble; /* TRUE if using short preamble. */ + bool short_slot; /* TRUE if using short slot timing. */ + bool radio_hw_enable; /* State of radio hardware enable bit. */ + + /* PHY/Radio device. */ + struct b43legacy_phy phy; + union { + /* DMA engines. */ + struct b43legacy_dma dma; + /* PIO engines. */ + struct b43legacy_pio pio; + }; + + /* Various statistics about the physical device. */ + struct b43legacy_stats stats; + +#define B43legacy_NR_LEDS 4 + struct b43legacy_led leds[B43legacy_NR_LEDS]; + + /* Reason code of the last interrupt. */ + u32 irq_reason; + u32 dma_reason[6]; + /* saved irq enable/disable state bitfield. */ + u32 irq_savedstate; + /* Link Quality calculation context. */ + struct b43legacy_noise_calculation noisecalc; + /* if > 0 MAC is suspended. if == 0 MAC is enabled. */ + int mac_suspended; + + /* Interrupt Service Routine tasklet (bottom-half) */ + struct tasklet_struct isr_tasklet; + + /* Periodic tasks */ + struct delayed_work periodic_work; + unsigned int periodic_state; + + struct work_struct restart_work; + + /* encryption/decryption */ + u16 ktp; /* Key table pointer */ + u8 max_nr_keys; + struct b43legacy_key key[58]; + + /* Cached beacon template while uploading the template. */ + struct sk_buff *cached_beacon; + + /* Firmware data */ + struct b43legacy_firmware fw; + + /* Devicelist in struct b43legacy_wl (all 802.11 cores) */ + struct list_head list; + + /* Debugging stuff follows. */ +#ifdef CONFIG_B43LEGACY_DEBUG + struct b43legacy_dfsentry *dfsentry; +#endif +}; + + +static inline +struct b43legacy_wl *hw_to_b43legacy_wl(struct ieee80211_hw *hw) +{ + return hw->priv; +} + +/* Helper function, which returns a boolean. + * TRUE, if PIO is used; FALSE, if DMA is used. + */ +#if defined(CONFIG_B43LEGACY_DMA) && defined(CONFIG_B43LEGACY_PIO) +static inline +int b43legacy_using_pio(struct b43legacy_wldev *dev) +{ + return dev->__using_pio; +} +#elif defined(CONFIG_B43LEGACY_DMA) +static inline +int b43legacy_using_pio(struct b43legacy_wldev *dev) +{ + return 0; +} +#elif defined(CONFIG_B43LEGACY_PIO) +static inline +int b43legacy_using_pio(struct b43legacy_wldev *dev) +{ + return 1; +} +#else +# error "Using neither DMA nor PIO? Confused..." +#endif + + +static inline +struct b43legacy_wldev *dev_to_b43legacy_wldev(struct device *dev) +{ + struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); + return ssb_get_drvdata(ssb_dev); +} + +/* Is the device operating in a specified mode (IEEE80211_IF_TYPE_XXX). */ +static inline +int b43legacy_is_mode(struct b43legacy_wl *wl, int type) +{ + if (type == IEEE80211_IF_TYPE_MNTR) + return !!(wl->monitor); + return (wl->operating && + wl->if_type == type); +} + +static inline +bool is_bcm_board_vendor(struct b43legacy_wldev *dev) +{ + return (dev->dev->bus->boardinfo.vendor == PCI_VENDOR_ID_BROADCOM); +} + +static inline +u16 b43legacy_read16(struct b43legacy_wldev *dev, u16 offset) +{ + return ssb_read16(dev->dev, offset); +} + +static inline +void b43legacy_write16(struct b43legacy_wldev *dev, u16 offset, u16 value) +{ + ssb_write16(dev->dev, offset, value); +} + +static inline +u32 b43legacy_read32(struct b43legacy_wldev *dev, u16 offset) +{ + return ssb_read32(dev->dev, offset); +} + +static inline +void b43legacy_write32(struct b43legacy_wldev *dev, u16 offset, u32 value) +{ + ssb_write32(dev->dev, offset, value); +} + +static inline +struct b43legacy_lopair *b43legacy_get_lopair(struct b43legacy_phy *phy, + u16 radio_attenuation, + u16 baseband_attenuation) +{ + return phy->_lo_pairs + (radio_attenuation + + 14 * (baseband_attenuation / 2)); +} + + + +/* Message printing */ +void b43legacyinfo(struct b43legacy_wl *wl, const char *fmt, ...) + __attribute__((format(printf, 2, 3))); +void b43legacyerr(struct b43legacy_wl *wl, const char *fmt, ...) + __attribute__((format(printf, 2, 3))); +void b43legacywarn(struct b43legacy_wl *wl, const char *fmt, ...) + __attribute__((format(printf, 2, 3))); +#if B43legacy_DEBUG +void b43legacydbg(struct b43legacy_wl *wl, const char *fmt, ...) + __attribute__((format(printf, 2, 3))); +#else /* DEBUG */ +# define b43legacydbg(wl, fmt...) do { /* nothing */ } while (0) +#endif /* DEBUG */ + + +/** Limit a value between two limits */ +#ifdef limit_value +# undef limit_value +#endif +#define limit_value(value, min, max) \ + ({ \ + typeof(value) __value = (value); \ + typeof(value) __min = (min); \ + typeof(value) __max = (max); \ + if (__value < __min) \ + __value = __min; \ + else if (__value > __max) \ + __value = __max; \ + __value; \ + }) + +/* Macros for printing a value in Q5.2 format */ +#define Q52_FMT "%u.%u" +#define Q52_ARG(q52) ((q52) / 4), (((q52) & 3) * 100 / 4) + +#endif /* B43legacy_H_ */ |