aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/b43
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/b43')
-rw-r--r--drivers/net/wireless/b43/Kconfig6
-rw-r--r--drivers/net/wireless/b43/Makefile2
-rw-r--r--drivers/net/wireless/b43/b43.h20
-rw-r--r--drivers/net/wireless/b43/dma.c19
-rw-r--r--drivers/net/wireless/b43/dma.h5
-rw-r--r--drivers/net/wireless/b43/main.c98
-rw-r--r--drivers/net/wireless/b43/phy_common.c45
-rw-r--r--drivers/net/wireless/b43/phy_common.h10
-rw-r--r--drivers/net/wireless/b43/phy_lp.c76
-rw-r--r--drivers/net/wireless/b43/phy_n.c3035
-rw-r--r--drivers/net/wireless/b43/phy_n.h98
-rw-r--r--drivers/net/wireless/b43/pio.c17
-rw-r--r--drivers/net/wireless/b43/pio.h45
-rw-r--r--drivers/net/wireless/b43/tables_nphy.c744
-rw-r--r--drivers/net/wireless/b43/tables_nphy.h100
15 files changed, 3868 insertions, 452 deletions
diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig
index 64c12e1bced..0a00d42642c 100644
--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -78,11 +78,11 @@ config B43_SDIO
If unsure, say N.
-# Data transfers to the device via PIO
-# This is only needed on PCMCIA and SDIO devices. All others can do DMA properly.
+#Data transfers to the device via PIO. We want it as a fallback even
+# if we can do DMA.
config B43_PIO
bool
- depends on B43 && (B43_SDIO || B43_PCMCIA || B43_FORCE_PIO)
+ depends on B43
select SSB_BLOCKIO
default y
diff --git a/drivers/net/wireless/b43/Makefile b/drivers/net/wireless/b43/Makefile
index 84772a2542d..5e83b6f0a3a 100644
--- a/drivers/net/wireless/b43/Makefile
+++ b/drivers/net/wireless/b43/Makefile
@@ -12,7 +12,7 @@ b43-y += xmit.o
b43-y += lo.o
b43-y += wa.o
b43-y += dma.o
-b43-$(CONFIG_B43_PIO) += pio.o
+b43-y += pio.o
b43-y += rfkill.o
b43-$(CONFIG_B43_LEDS) += leds.o
b43-$(CONFIG_B43_PCMCIA) += pcmcia.o
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index c484cc25389..b8807fb12c9 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -254,6 +254,14 @@ enum {
#define B43_SHM_SH_MAXBFRAMES 0x0080 /* Maximum number of frames in a burst */
#define B43_SHM_SH_SPUWKUP 0x0094 /* pre-wakeup for synth PU in us */
#define B43_SHM_SH_PRETBTT 0x0096 /* pre-TBTT in us */
+/* SHM_SHARED tx iq workarounds */
+#define B43_SHM_SH_NPHY_TXIQW0 0x0700
+#define B43_SHM_SH_NPHY_TXIQW1 0x0702
+#define B43_SHM_SH_NPHY_TXIQW2 0x0704
+#define B43_SHM_SH_NPHY_TXIQW3 0x0706
+/* SHM_SHARED tx pwr ctrl */
+#define B43_SHM_SH_NPHY_TXPWR_INDX0 0x0708
+#define B43_SHM_SH_NPHY_TXPWR_INDX1 0x070E
/* SHM_SCRATCH offsets */
#define B43_SHM_SC_MINCONT 0x0003 /* Minimum contention window */
@@ -694,6 +702,7 @@ struct b43_wldev {
bool radio_hw_enable; /* saved state of radio hardware enabled state */
bool qos_enabled; /* TRUE, if QoS is used. */
bool hwcrypto_enabled; /* TRUE, if HW crypto acceleration is enabled. */
+ bool use_pio; /* TRUE if next init should use PIO */
/* PHY/Radio device. */
struct b43_phy phy;
@@ -822,11 +831,9 @@ struct b43_wl {
/* The device LEDs. */
struct b43_leds leds;
-#ifdef CONFIG_B43_PIO
/* Kmalloc'ed scratch space for PIO TX/RX. Protected by wl->mutex. */
u8 pio_scratchspace[110] __attribute__((__aligned__(8)));
u8 pio_tailspace[4] __attribute__((__aligned__(8)));
-#endif /* CONFIG_B43_PIO */
};
static inline struct b43_wl *hw_to_b43_wl(struct ieee80211_hw *hw)
@@ -877,20 +884,15 @@ static inline void b43_write32(struct b43_wldev *dev, u16 offset, u32 value)
static inline bool b43_using_pio_transfers(struct b43_wldev *dev)
{
-#ifdef CONFIG_B43_PIO
return dev->__using_pio_transfers;
-#else
- return 0;
-#endif
}
#ifdef CONFIG_B43_FORCE_PIO
-# define B43_FORCE_PIO 1
+# define B43_PIO_DEFAULT 1
#else
-# define B43_FORCE_PIO 0
+# define B43_PIO_DEFAULT 0
#endif
-
/* Message printing */
void b43info(struct b43_wl *wl, const char *fmt, ...)
__attribute__ ((format(printf, 2, 3)));
diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c
index 88d1fd02d40..be7abf8916a 100644
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -1369,7 +1369,6 @@ int b43_dma_tx(struct b43_wldev *dev, struct sk_buff *skb)
b43err(dev->wl, "DMA tx mapping failure\n");
goto out;
}
- ring->nr_tx_packets++;
if ((free_slots(ring) < TX_SLOTS_PER_FRAME) ||
should_inject_overflow(ring)) {
/* This TX ring is full. */
@@ -1500,22 +1499,6 @@ void b43_dma_handle_txstatus(struct b43_wldev *dev,
}
}
-void b43_dma_get_tx_stats(struct b43_wldev *dev,
- struct ieee80211_tx_queue_stats *stats)
-{
- const int nr_queues = dev->wl->hw->queues;
- struct b43_dmaring *ring;
- int i;
-
- for (i = 0; i < nr_queues; i++) {
- ring = select_ring_by_priority(dev, i);
-
- stats[i].len = ring->used_slots / TX_SLOTS_PER_FRAME;
- stats[i].limit = ring->nr_slots / TX_SLOTS_PER_FRAME;
- stats[i].count = ring->nr_tx_packets;
- }
-}
-
static void dma_rx(struct b43_dmaring *ring, int *slot)
{
const struct b43_dma_ops *ops = ring->ops;
@@ -1653,7 +1636,6 @@ void b43_dma_tx_resume(struct b43_wldev *dev)
b43_power_saving_ctl_bits(dev, 0);
}
-#ifdef CONFIG_B43_PIO
static void direct_fifo_rx(struct b43_wldev *dev, enum b43_dmatype type,
u16 mmio_base, bool enable)
{
@@ -1687,4 +1669,3 @@ void b43_dma_direct_fifo_rx(struct b43_wldev *dev,
mmio_base = b43_dmacontroller_base(type, engine_index);
direct_fifo_rx(dev, type, mmio_base, enable);
}
-#endif /* CONFIG_B43_PIO */
diff --git a/drivers/net/wireless/b43/dma.h b/drivers/net/wireless/b43/dma.h
index f7ab37c4cdb..dc91944d602 100644
--- a/drivers/net/wireless/b43/dma.h
+++ b/drivers/net/wireless/b43/dma.h
@@ -228,8 +228,6 @@ struct b43_dmaring {
int used_slots;
/* Currently used slot in the ring. */
int current_slot;
- /* Total number of packets sent. Statistics only. */
- unsigned int nr_tx_packets;
/* Frameoffset in octets. */
u32 frameoffset;
/* Descriptor buffer size. */
@@ -278,9 +276,6 @@ void b43_dma_free(struct b43_wldev *dev);
void b43_dma_tx_suspend(struct b43_wldev *dev);
void b43_dma_tx_resume(struct b43_wldev *dev);
-void b43_dma_get_tx_stats(struct b43_wldev *dev,
- struct ieee80211_tx_queue_stats *stats);
-
int b43_dma_tx(struct b43_wldev *dev,
struct sk_buff *skb);
void b43_dma_handle_txstatus(struct b43_wldev *dev,
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 490fb45d1d0..1521b1e78d2 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -67,7 +67,12 @@ MODULE_AUTHOR("Gábor Stefanik");
MODULE_LICENSE("GPL");
MODULE_FIRMWARE(B43_SUPPORTED_FIRMWARE_ID);
-
+MODULE_FIRMWARE("b43/ucode11.fw");
+MODULE_FIRMWARE("b43/ucode13.fw");
+MODULE_FIRMWARE("b43/ucode14.fw");
+MODULE_FIRMWARE("b43/ucode15.fw");
+MODULE_FIRMWARE("b43/ucode5.fw");
+MODULE_FIRMWARE("b43/ucode9.fw");
static int modparam_bad_frames_preempt;
module_param_named(bad_frames_preempt, modparam_bad_frames_preempt, int, 0444);
@@ -102,6 +107,9 @@ int b43_modparam_verbose = B43_VERBOSITY_DEFAULT;
module_param_named(verbose, b43_modparam_verbose, int, 0644);
MODULE_PARM_DESC(verbose, "Log message verbosity: 0=error, 1=warn, 2=info(default), 3=debug");
+int b43_modparam_pio = B43_PIO_DEFAULT;
+module_param_named(pio, b43_modparam_pio, int, 0644);
+MODULE_PARM_DESC(pio, "Use PIO accesses by default: 0=DMA, 1=PIO");
static const struct ssb_device_id b43_ssb_tbl[] = {
SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 5),
@@ -110,6 +118,7 @@ static const struct ssb_device_id b43_ssb_tbl[] = {
SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 9),
SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 10),
SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 11),
+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 12),
SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 13),
SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 15),
SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 16),
@@ -842,8 +851,10 @@ static void rx_tkip_phase1_write(struct b43_wldev *dev, u8 index, u32 iv32,
}
static void b43_op_update_tkip_key(struct ieee80211_hw *hw,
- struct ieee80211_key_conf *keyconf, const u8 *addr,
- u32 iv32, u16 *phase1key)
+ struct ieee80211_vif *vif,
+ struct ieee80211_key_conf *keyconf,
+ struct ieee80211_sta *sta,
+ u32 iv32, u16 *phase1key)
{
struct b43_wl *wl = hw_to_b43_wl(hw);
struct b43_wldev *dev;
@@ -852,19 +863,19 @@ static void b43_op_update_tkip_key(struct ieee80211_hw *hw,
if (B43_WARN_ON(!modparam_hwtkip))
return;
- mutex_lock(&wl->mutex);
-
+ /* This is only called from the RX path through mac80211, where
+ * our mutex is already locked. */
+ B43_WARN_ON(!mutex_is_locked(&wl->mutex));
dev = wl->current_dev;
- if (!dev || b43_status(dev) < B43_STAT_INITIALIZED)
- goto out_unlock;
+ B43_WARN_ON(!dev || b43_status(dev) < B43_STAT_INITIALIZED);
keymac_write(dev, index, NULL); /* First zero out mac to avoid race */
rx_tkip_phase1_write(dev, index, iv32, phase1key);
- keymac_write(dev, index, addr);
-
-out_unlock:
- mutex_unlock(&wl->mutex);
+ /* only pairwise TKIP keys are supported right now */
+ if (WARN_ON(!sta))
+ return;
+ keymac_write(dev, index, sta->addr);
}
static void do_key_write(struct b43_wldev *dev,
@@ -1793,8 +1804,9 @@ static void b43_do_interrupt_thread(struct b43_wldev *dev)
dma_reason[4], dma_reason[5]);
b43err(dev->wl, "This device does not support DMA "
"on your system. Please use PIO instead.\n");
- b43err(dev->wl, "CONFIG_B43_FORCE_PIO must be set in "
- "your kernel configuration.\n");
+ /* Fall back to PIO transfers if we get fatal DMA errors! */
+ dev->use_pio = 1;
+ b43_controller_restart(dev, "DMA error");
return;
}
if (merged_dma_reason & B43_DMAIRQ_NONFATALMASK) {
@@ -3345,27 +3357,6 @@ out_unlock:
return err;
}
-static int b43_op_get_tx_stats(struct ieee80211_hw *hw,
- struct ieee80211_tx_queue_stats *stats)
-{
- struct b43_wl *wl = hw_to_b43_wl(hw);
- struct b43_wldev *dev;
- int err = -ENODEV;
-
- mutex_lock(&wl->mutex);
- dev = wl->current_dev;
- if (dev && b43_status(dev) >= B43_STAT_STARTED) {
- if (b43_using_pio_transfers(dev))
- b43_pio_get_tx_stats(dev, stats);
- else
- b43_dma_get_tx_stats(dev, stats);
- err = 0;
- }
- mutex_unlock(&wl->mutex);
-
- return err;
-}
-
static int b43_op_get_stats(struct ieee80211_hw *hw,
struct ieee80211_low_level_stats *stats)
{
@@ -3569,6 +3560,12 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed)
dev = wl->current_dev;
phy = &dev->phy;
+ if (conf_is_ht(conf))
+ phy->is_40mhz =
+ (conf_is_ht40_minus(conf) || conf_is_ht40_plus(conf));
+ else
+ phy->is_40mhz = false;
+
b43_mac_suspend(dev);
if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
@@ -3970,6 +3967,7 @@ static int b43_wireless_core_start(struct b43_wldev *dev)
}
/* We are ready to run. */
+ ieee80211_wake_queues(dev->wl->hw);
b43_set_status(dev, B43_STAT_STARTED);
/* Start data flow (TX/RX). */
@@ -4360,7 +4358,7 @@ static int b43_wireless_core_init(struct b43_wldev *dev)
if ((dev->dev->bus->bustype == SSB_BUSTYPE_PCMCIA) ||
(dev->dev->bus->bustype == SSB_BUSTYPE_SDIO) ||
- B43_FORCE_PIO) {
+ dev->use_pio) {
dev->__using_pio_transfers = 1;
err = b43_pio_init(dev);
} else {
@@ -4379,8 +4377,6 @@ static int b43_wireless_core_init(struct b43_wldev *dev)
ieee80211_wake_queues(dev->wl->hw);
- ieee80211_wake_queues(dev->wl->hw);
-
b43_set_status(dev, B43_STAT_INITIALIZED);
out:
@@ -4395,7 +4391,7 @@ err_busdown:
}
static int b43_op_add_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
struct b43_wl *wl = hw_to_b43_wl(hw);
struct b43_wldev *dev;
@@ -4403,24 +4399,24 @@ static int b43_op_add_interface(struct ieee80211_hw *hw,
/* TODO: allow WDS/AP devices to coexist */
- if (conf->type != NL80211_IFTYPE_AP &&
- conf->type != NL80211_IFTYPE_MESH_POINT &&
- conf->type != NL80211_IFTYPE_STATION &&
- conf->type != NL80211_IFTYPE_WDS &&
- conf->type != NL80211_IFTYPE_ADHOC)
+ if (vif->type != NL80211_IFTYPE_AP &&
+ vif->type != NL80211_IFTYPE_MESH_POINT &&
+ vif->type != NL80211_IFTYPE_STATION &&
+ vif->type != NL80211_IFTYPE_WDS &&
+ vif->type != NL80211_IFTYPE_ADHOC)
return -EOPNOTSUPP;
mutex_lock(&wl->mutex);
if (wl->operating)
goto out_mutex_unlock;
- b43dbg(wl, "Adding Interface type %d\n", conf->type);
+ b43dbg(wl, "Adding Interface type %d\n", vif->type);
dev = wl->current_dev;
wl->operating = 1;
- wl->vif = conf->vif;
- wl->if_type = conf->type;
- memcpy(wl->mac_addr, conf->mac_addr, ETH_ALEN);
+ wl->vif = vif;
+ wl->if_type = vif->type;
+ memcpy(wl->mac_addr, vif->addr, ETH_ALEN);
b43_adjust_opmode(dev);
b43_set_pretbtt(dev);
@@ -4435,17 +4431,17 @@ static int b43_op_add_interface(struct ieee80211_hw *hw,
}
static void b43_op_remove_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
struct b43_wl *wl = hw_to_b43_wl(hw);
struct b43_wldev *dev = wl->current_dev;
- b43dbg(wl, "Removing Interface type %d\n", conf->type);
+ b43dbg(wl, "Removing Interface type %d\n", vif->type);
mutex_lock(&wl->mutex);
B43_WARN_ON(!wl->operating);
- B43_WARN_ON(wl->vif != conf->vif);
+ B43_WARN_ON(wl->vif != vif);
wl->vif = NULL;
wl->operating = 0;
@@ -4586,7 +4582,6 @@ static const struct ieee80211_ops b43_hw_ops = {
.set_key = b43_op_set_key,
.update_tkip_key = b43_op_update_tkip_key,
.get_stats = b43_op_get_stats,
- .get_tx_stats = b43_op_get_tx_stats,
.get_tsf = b43_op_get_tsf,
.set_tsf = b43_op_set_tsf,
.start = b43_op_start,
@@ -4830,6 +4825,7 @@ static int b43_one_core_attach(struct ssb_device *dev, struct b43_wl *wl)
if (!wldev)
goto out;
+ wldev->use_pio = b43_modparam_pio;
wldev->dev = dev;
wldev->wl = wl;
b43_set_status(wldev, B43_STAT_UNINIT);
diff --git a/drivers/net/wireless/b43/phy_common.c b/drivers/net/wireless/b43/phy_common.c
index 75b26e175e8..8f7d7eff2d8 100644
--- a/drivers/net/wireless/b43/phy_common.c
+++ b/drivers/net/wireless/b43/phy_common.c
@@ -421,3 +421,48 @@ void b43_phyop_switch_analog_generic(struct b43_wldev *dev, bool on)
{
b43_write16(dev, B43_MMIO_PHY0, on ? 0 : 0xF4);
}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/Cordic */
+struct b43_c32 b43_cordic(int theta)
+{
+ u32 arctg[] = { 2949120, 1740967, 919879, 466945, 234379, 117304,
+ 58666, 29335, 14668, 7334, 3667, 1833, 917, 458,
+ 229, 115, 57, 29, };
+ u8 i;
+ s32 tmp;
+ s8 signx = 1;
+ u32 angle = 0;
+ struct b43_c32 ret = { .i = 39797, .q = 0, };
+
+ while (theta > (180 << 16))
+ theta -= (360 << 16);
+ while (theta < -(180 << 16))
+ theta += (360 << 16);
+
+ if (theta > (90 << 16)) {
+ theta -= (180 << 16);
+ signx = -1;
+ } else if (theta < -(90 << 16)) {
+ theta += (180 << 16);
+ signx = -1;
+ }
+
+ for (i = 0; i <= 17; i++) {
+ if (theta > angle) {
+ tmp = ret.i - (ret.q >> i);
+ ret.q += ret.i >> i;
+ ret.i = tmp;
+ angle += arctg[i];
+ } else {
+ tmp = ret.i + (ret.q >> i);
+ ret.q -= ret.i >> i;
+ ret.i = tmp;
+ angle -= arctg[i];
+ }
+ }
+
+ ret.i *= signx;
+ ret.q *= signx;
+
+ return ret;
+}
diff --git a/drivers/net/wireless/b43/phy_common.h b/drivers/net/wireless/b43/phy_common.h
index 9edd4e8e0c8..bd480b481bf 100644
--- a/drivers/net/wireless/b43/phy_common.h
+++ b/drivers/net/wireless/b43/phy_common.h
@@ -5,6 +5,12 @@
struct b43_wldev;
+/* Complex number using 2 32-bit signed integers */
+struct b43_c32 { s32 i, q; };
+
+#define CORDIC_CONVERT(value) (((value) >= 0) ? \
+ ((((value) >> 15) + 1) >> 1) : \
+ -((((-(value)) >> 15) + 1) >> 1))
/* PHY register routing bits */
#define B43_PHYROUTE 0x0C00 /* PHY register routing bits mask */
@@ -212,6 +218,9 @@ struct b43_phy {
bool supports_2ghz;
bool supports_5ghz;
+ /* HT info */
+ bool is_40mhz;
+
/* GMODE bit enabled? */
bool gmode;
@@ -418,5 +427,6 @@ int b43_phy_shm_tssi_read(struct b43_wldev *dev, u16 shm_offset);
*/
void b43_phyop_switch_analog_generic(struct b43_wldev *dev, bool on);
+struct b43_c32 b43_cordic(int theta);
#endif /* LINUX_B43_PHY_COMMON_H_ */
diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c
index 3e046ec1ff8..185219e0a55 100644
--- a/drivers/net/wireless/b43/phy_lp.c
+++ b/drivers/net/wireless/b43/phy_lp.c
@@ -80,6 +80,7 @@ static void b43_lpphy_op_free(struct b43_wldev *dev)
dev->phy.lp = NULL;
}
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/LP/ReadBandSrom */
static void lpphy_read_band_sprom(struct b43_wldev *dev)
{
struct b43_phy_lp *lpphy = dev->phy.lp;
@@ -101,6 +102,12 @@ static void lpphy_read_band_sprom(struct b43_wldev *dev)
maxpwr = bus->sprom.maxpwr_bg;
lpphy->max_tx_pwr_med_band = maxpwr;
cckpo = bus->sprom.cck2gpo;
+ /*
+ * We don't read SPROM's opo as specs say. On rev8 SPROMs
+ * opo == ofdm2gpo and we don't know any SSB with LP-PHY
+ * and SPROM rev below 8.
+ */
+ B43_WARN_ON(bus->sprom.revision < 8);
ofdmpo = bus->sprom.ofdm2gpo;
if (cckpo) {
for (i = 0; i < 4; i++) {
@@ -1703,19 +1710,6 @@ static const struct lpphy_rx_iq_comp lpphy_rev2plus_iq_comp = {
.c0 = 0,
};
-static u8 lpphy_nbits(s32 val)
-{
- u32 tmp = abs(val);
- u8 nbits = 0;
-
- while (tmp != 0) {
- nbits++;
- tmp >>= 1;
- }
-
- return nbits;
-}
-
static int lpphy_calc_rx_iq_comp(struct b43_wldev *dev, u16 samples)
{
struct lpphy_iq_est iq_est;
@@ -1742,8 +1736,8 @@ static int lpphy_calc_rx_iq_comp(struct b43_wldev *dev, u16 samples)
goto out;
}
- prod_msb = lpphy_nbits(prod);
- q_msb = lpphy_nbits(qpwr);
+ prod_msb = fls(abs(prod));
+ q_msb = fls(abs(qpwr));
tmp1 = prod_msb - 20;
if (tmp1 >= 0) {
@@ -1773,47 +1767,6 @@ out:
return ret;
}
-/* Complex number using 2 32-bit signed integers */
-typedef struct {s32 i, q;} lpphy_c32;
-
-static lpphy_c32 lpphy_cordic(int theta)
-{
- u32 arctg[] = { 2949120, 1740967, 919879, 466945, 234379, 117304,
- 58666, 29335, 14668, 7334, 3667, 1833, 917, 458,
- 229, 115, 57, 29, };
- int i, tmp, signx = 1, angle = 0;
- lpphy_c32 ret = { .i = 39797, .q = 0, };
-
- theta = clamp_t(int, theta, -180, 180);
-
- if (theta > 90) {
- theta -= 180;
- signx = -1;
- } else if (theta < -90) {
- theta += 180;
- signx = -1;
- }
-
- for (i = 0; i <= 17; i++) {
- if (theta > angle) {
- tmp = ret.i - (ret.q >> i);
- ret.q += ret.i >> i;
- ret.i = tmp;
- angle += arctg[i];
- } else {
- tmp = ret.i + (ret.q >> i);
- ret.q -= ret.i >> i;
- ret.i = tmp;
- angle -= arctg[i];
- }
- }
-
- ret.i *= signx;
- ret.q *= signx;
-
- return ret;
-}
-
static void lpphy_run_samples(struct b43_wldev *dev, u16 samples, u16 loops,
u16 wait)
{
@@ -1831,8 +1784,9 @@ static void lpphy_start_tx_tone(struct b43_wldev *dev, s32 freq, u16 max)
{
struct b43_phy_lp *lpphy = dev->phy.lp;
u16 buf[64];
- int i, samples = 0, angle = 0, rotation = (9 * freq) / 500;
- lpphy_c32 sample;
+ int i, samples = 0, angle = 0;
+ int rotation = (((36 * freq) / 20) << 16) / 100;
+ struct b43_c32 sample;
lpphy->tx_tone_freq = freq;
@@ -1848,10 +1802,10 @@ static void lpphy_start_tx_tone(struct b43_wldev *dev, s32 freq, u16 max)
}
for (i = 0; i < samples; i++) {
- sample = lpphy_cordic(angle);
+ sample = b43_cordic(angle);
angle += rotation;
- buf[i] = ((sample.i * max) & 0xFF) << 8;
- buf[i] |= (sample.q * max) & 0xFF;
+ buf[i] = CORDIC_CONVERT((sample.i * max) & 0xFF) << 8;
+ buf[i] |= CORDIC_CONVERT((sample.q * max) & 0xFF);
}
b43_lptab_write_bulk(dev, B43_LPTAB16(5, 0), samples, buf);
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 992318a7807..795bb1e3345 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -28,7 +28,50 @@
#include "b43.h"
#include "phy_n.h"
#include "tables_nphy.h"
+#include "main.h"
+struct nphy_txgains {
+ u16 txgm[2];
+ u16 pga[2];
+ u16 pad[2];
+ u16 ipa[2];
+};
+
+struct nphy_iqcal_params {
+ u16 txgm;
+ u16 pga;
+ u16 pad;
+ u16 ipa;
+ u16 cal_gain;
+ u16 ncorr[5];
+};
+
+struct nphy_iq_est {
+ s32 iq0_prod;
+ u32 i0_pwr;
+ u32 q0_pwr;
+ s32 iq1_prod;
+ u32 i1_pwr;
+ u32 q1_pwr;
+};
+
+enum b43_nphy_rf_sequence {
+ B43_RFSEQ_RX2TX,
+ B43_RFSEQ_TX2RX,
+ B43_RFSEQ_RESET2RX,
+ B43_RFSEQ_UPDATE_GAINH,
+ B43_RFSEQ_UPDATE_GAINL,
+ B43_RFSEQ_UPDATE_GAINU,
+};
+
+static void b43_nphy_set_rf_sequence(struct b43_wldev *dev, u8 cmd,
+ u8 *events, u8 *delays, u8 length);
+static void b43_nphy_force_rf_sequence(struct b43_wldev *dev,
+ enum b43_nphy_rf_sequence seq);
+static void b43_nphy_rf_control_override(struct b43_wldev *dev, u16 field,
+ u16 value, u8 core, bool off);
+static void b43_nphy_rf_control_intc_override(struct b43_wldev *dev, u8 field,
+ u16 value, u8 core);
void b43_nphy_set_rxantenna(struct b43_wldev *dev, int antenna)
{//TODO
@@ -197,173 +240,1020 @@ void b43_nphy_radio_turn_off(struct b43_wldev *dev)
~B43_NPHY_RFCTL_CMD_EN);
}
-#define ntab_upload(dev, offset, data) do { \
- unsigned int i; \
- for (i = 0; i < (offset##_SIZE); i++) \
- b43_ntab_write(dev, (offset) + i, (data)[i]); \
- } while (0)
-
-/* Upload the N-PHY tables. */
+/*
+ * Upload the N-PHY tables.
+ * http://bcm-v4.sipsolutions.net/802.11/PHY/N/InitTables
+ */
static void b43_nphy_tables_init(struct b43_wldev *dev)
{
- /* Static tables */
- ntab_upload(dev, B43_NTAB_FRAMESTRUCT, b43_ntab_framestruct);
- ntab_upload(dev, B43_NTAB_FRAMELT, b43_ntab_framelookup);
- ntab_upload(dev, B43_NTAB_TMAP, b43_ntab_tmap);
- ntab_upload(dev, B43_NTAB_TDTRN, b43_ntab_tdtrn);
- ntab_upload(dev, B43_NTAB_INTLEVEL, b43_ntab_intlevel);
- ntab_upload(dev, B43_NTAB_PILOT, b43_ntab_pilot);
- ntab_upload(dev, B43_NTAB_PILOTLT, b43_ntab_pilotlt);
- ntab_upload(dev, B43_NTAB_TDI20A0, b43_ntab_tdi20a0);
- ntab_upload(dev, B43_NTAB_TDI20A1, b43_ntab_tdi20a1);
- ntab_upload(dev, B43_NTAB_TDI40A0, b43_ntab_tdi40a0);
- ntab_upload(dev, B43_NTAB_TDI40A1, b43_ntab_tdi40a1);
- ntab_upload(dev, B43_NTAB_BDI, b43_ntab_bdi);
- ntab_upload(dev, B43_NTAB_CHANEST, b43_ntab_channelest);
- ntab_upload(dev, B43_NTAB_MCS, b43_ntab_mcs);
-
- /* Volatile tables */
- ntab_upload(dev, B43_NTAB_NOISEVAR10, b43_ntab_noisevar10);
- ntab_upload(dev, B43_NTAB_NOISEVAR11, b43_ntab_noisevar11);
- ntab_upload(dev, B43_NTAB_C0_ESTPLT, b43_ntab_estimatepowerlt0);
- ntab_upload(dev, B43_NTAB_C1_ESTPLT, b43_ntab_estimatepowerlt1);
- ntab_upload(dev, B43_NTAB_C0_ADJPLT, b43_ntab_adjustpower0);
- ntab_upload(dev, B43_NTAB_C1_ADJPLT, b43_ntab_adjustpower1);
- ntab_upload(dev, B43_NTAB_C0_GAINCTL, b43_ntab_gainctl0);
- ntab_upload(dev, B43_NTAB_C1_GAINCTL, b43_ntab_gainctl1);
- ntab_upload(dev, B43_NTAB_C0_IQLT, b43_ntab_iqlt0);
- ntab_upload(dev, B43_NTAB_C1_IQLT, b43_ntab_iqlt1);
- ntab_upload(dev, B43_NTAB_C0_LOFEEDTH, b43_ntab_loftlt0);
- ntab_upload(dev, B43_NTAB_C1_LOFEEDTH, b43_ntab_loftlt1);
+ if (dev->phy.rev < 3)
+ b43_nphy_rev0_1_2_tables_init(dev);
+ else
+ b43_nphy_rev3plus_tables_init(dev);
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/PA%20override */
+static void b43_nphy_pa_override(struct b43_wldev *dev, bool enable)
+{
+ struct b43_phy_n *nphy = dev->phy.n;
+ enum ieee80211_band band;
+ u16 tmp;
+
+ if (!enable) {
+ nphy->rfctrl_intc1_save = b43_phy_read(dev,
+ B43_NPHY_RFCTL_INTC1);
+ nphy->rfctrl_intc2_save = b43_phy_read(dev,
+ B43_NPHY_RFCTL_INTC2);
+ band = b43_current_band(dev->wl);
+ if (dev->phy.rev >= 3) {
+ if (band == IEEE80211_BAND_5GHZ)
+ tmp = 0x600;
+ else
+ tmp = 0x480;
+ } else {
+ if (band == IEEE80211_BAND_5GHZ)
+ tmp = 0x180;
+ else
+ tmp = 0x120;
+ }
+ b43_phy_write(dev, B43_NPHY_RFCTL_INTC1, tmp);
+ b43_phy_write(dev, B43_NPHY_RFCTL_INTC2, tmp);
+ } else {
+ b43_phy_write(dev, B43_NPHY_RFCTL_INTC1,
+ nphy->rfctrl_intc1_save);
+ b43_phy_write(dev, B43_NPHY_RFCTL_INTC2,
+ nphy->rfctrl_intc2_save);
+ }
}
-static void b43_nphy_workarounds(struct b43_wldev *dev)
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/TxLpFbw */
+static void b43_nphy_tx_lp_fbw(struct b43_wldev *dev)
+{
+ struct b43_phy_n *nphy = dev->phy.n;
+ u16 tmp;
+ enum ieee80211_band band = b43_current_band(dev->wl);
+ bool ipa = (nphy->ipa2g_on && band == IEEE80211_BAND_2GHZ) ||
+ (nphy->ipa5g_on && band == IEEE80211_BAND_5GHZ);
+
+ if (dev->phy.rev >= 3) {
+ if (ipa) {
+ tmp = 4;
+ b43_phy_write(dev, B43_NPHY_TXF_40CO_B32S2,
+ (((((tmp << 3) | tmp) << 3) | tmp) << 3) | tmp);
+ }
+
+ tmp = 1;
+ b43_phy_write(dev, B43_NPHY_TXF_40CO_B1S2,
+ (((((tmp << 3) | tmp) << 3) | tmp) << 3) | tmp);
+ }
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/BmacPhyClkFgc */
+static void b43_nphy_bmac_clock_fgc(struct b43_wldev *dev, bool force)
+{
+ u32 tmslow;
+
+ if (dev->phy.type != B43_PHYTYPE_N)
+ return;
+
+ tmslow = ssb_read32(dev->dev, SSB_TMSLOW);
+ if (force)
+ tmslow |= SSB_TMSLOW_FGC;
+ else
+ tmslow &= ~SSB_TMSLOW_FGC;
+ ssb_write32(dev->dev, SSB_TMSLOW, tmslow);
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/CCA */
+static void b43_nphy_reset_cca(struct b43_wldev *dev)
+{
+ u16 bbcfg;
+
+ b43_nphy_bmac_clock_fgc(dev, 1);
+ bbcfg = b43_phy_read(dev, B43_NPHY_BBCFG);
+ b43_phy_write(dev, B43_NPHY_BBCFG, bbcfg | B43_NPHY_BBCFG_RSTCCA);
+ udelay(1);
+ b43_phy_write(dev, B43_NPHY_BBCFG, bbcfg & ~B43_NPHY_BBCFG_RSTCCA);
+ b43_nphy_bmac_clock_fgc(dev, 0);
+ b43_nphy_force_rf_sequence(dev, B43_RFSEQ_RESET2RX);
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/MIMOConfig */
+static void b43_nphy_update_mimo_config(struct b43_wldev *dev, s32 preamble)
+{
+ u16 mimocfg = b43_phy_read(dev, B43_NPHY_MIMOCFG);
+
+ mimocfg |= B43_NPHY_MIMOCFG_AUTO;
+ if (preamble == 1)
+ mimocfg |= B43_NPHY_MIMOCFG_GFMIX;
+ else
+ mimocfg &= ~B43_NPHY_MIMOCFG_GFMIX;
+
+ b43_phy_write(dev, B43_NPHY_MIMOCFG, mimocfg);
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/Chains */
+static void b43_nphy_update_txrx_chain(struct b43_wldev *dev)
+{
+ struct b43_phy_n *nphy = dev->phy.n;
+
+ bool override = false;
+ u16 chain = 0x33;
+
+ if (nphy->txrx_chain == 0) {
+ chain = 0x11;
+ override = true;
+ } else if (nphy->txrx_chain == 1) {
+ chain = 0x22;
+ override = true;
+ }
+
+ b43_phy_maskset(dev, B43_NPHY_RFSEQCA,
+ ~(B43_NPHY_RFSEQCA_TXEN | B43_NPHY_RFSEQCA_RXEN),
+ chain);
+
+ if (override)
+ b43_phy_set(dev, B43_NPHY_RFSEQMODE,
+ B43_NPHY_RFSEQMODE_CAOVER);
+ else
+ b43_phy_mask(dev, B43_NPHY_RFSEQMODE,
+ ~B43_NPHY_RFSEQMODE_CAOVER);
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RxIqEst */
+static void b43_nphy_rx_iq_est(struct b43_wldev *dev, struct nphy_iq_est *est,
+ u16 samps, u8 time, bool wait)
+{
+ int i;
+ u16 tmp;
+
+ b43_phy_write(dev, B43_NPHY_IQEST_SAMCNT, samps);
+ b43_phy_maskset(dev, B43_NPHY_IQEST_WT, ~B43_NPHY_IQEST_WT_VAL, time);
+ if (wait)
+ b43_phy_set(dev, B43_NPHY_IQEST_CMD, B43_NPHY_IQEST_CMD_MODE);
+ else
+ b43_phy_mask(dev, B43_NPHY_IQEST_CMD, ~B43_NPHY_IQEST_CMD_MODE);
+
+ b43_phy_set(dev, B43_NPHY_IQEST_CMD, B43_NPHY_IQEST_CMD_START);
+
+ for (i = 1000; i; i--) {
+ tmp = b43_phy_read(dev, B43_NPHY_IQEST_CMD);
+ if (!(tmp & B43_NPHY_IQEST_CMD_START)) {
+ est->i0_pwr = (b43_phy_read(dev, B43_NPHY_IQEST_IPACC_HI0) << 16) |
+ b43_phy_read(dev, B43_NPHY_IQEST_IPACC_LO0);
+ est->q0_pwr = (b43_phy_read(dev, B43_NPHY_IQEST_QPACC_HI0) << 16) |
+ b43_phy_read(dev, B43_NPHY_IQEST_QPACC_LO0);
+ est->iq0_prod = (b43_phy_read(dev, B43_NPHY_IQEST_IQACC_HI0) << 16) |
+ b43_phy_read(dev, B43_NPHY_IQEST_IQACC_LO0);
+
+ est->i1_pwr = (b43_phy_read(dev, B43_NPHY_IQEST_IPACC_HI1) << 16) |
+ b43_phy_read(dev, B43_NPHY_IQEST_IPACC_LO1);
+ est->q1_pwr = (b43_phy_read(dev, B43_NPHY_IQEST_QPACC_HI1) << 16) |
+ b43_phy_read(dev, B43_NPHY_IQEST_QPACC_LO1);
+ est->iq1_prod = (b43_phy_read(dev, B43_NPHY_IQEST_IQACC_HI1) << 16) |
+ b43_phy_read(dev, B43_NPHY_IQEST_IQACC_LO1);
+ return;
+ }
+ udelay(10);
+ }
+ memset(est, 0, sizeof(*est));
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RxIqCoeffs */
+static void b43_nphy_rx_iq_coeffs(struct b43_wldev *dev, bool write,
+ struct b43_phy_n_iq_comp *pcomp)
+{
+ if (write) {
+ b43_phy_write(dev, B43_NPHY_C1_RXIQ_COMPA0, pcomp->a0);
+ b43_phy_write(dev, B43_NPHY_C1_RXIQ_COMPB0, pcomp->b0);
+ b43_phy_write(dev, B43_NPHY_C2_RXIQ_COMPA1, pcomp->a1);
+ b43_phy_write(dev, B43_NPHY_C2_RXIQ_COMPB1, pcomp->b1);
+ } else {
+ pcomp->a0 = b43_phy_read(dev, B43_NPHY_C1_RXIQ_COMPA0);
+ pcomp->b0 = b43_phy_read(dev, B43_NPHY_C1_RXIQ_COMPB0);
+ pcomp->a1 = b43_phy_read(dev, B43_NPHY_C2_RXIQ_COMPA1);
+ pcomp->b1 = b43_phy_read(dev, B43_NPHY_C2_RXIQ_COMPB1);
+ }
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RxCalPhyCleanup */
+static void b43_nphy_rx_cal_phy_cleanup(struct b43_wldev *dev, u8 core)
+{
+ u16 *regs = dev->phy.n->tx_rx_cal_phy_saveregs;
+
+ b43_phy_write(dev, B43_NPHY_RFSEQCA, regs[0]);
+ if (core == 0) {
+ b43_phy_write(dev, B43_NPHY_AFECTL_C1, regs[1]);
+ b43_phy_write(dev, B43_NPHY_AFECTL_OVER1, regs[2]);
+ } else {
+ b43_phy_write(dev, B43_NPHY_AFECTL_C2, regs[1]);
+ b43_phy_write(dev, B43_NPHY_AFECTL_OVER, regs[2]);
+ }
+ b43_phy_write(dev, B43_NPHY_RFCTL_INTC1, regs[3]);
+ b43_phy_write(dev, B43_NPHY_RFCTL_INTC2, regs[4]);
+ b43_phy_write(dev, B43_NPHY_RFCTL_RSSIO1, regs[5]);
+ b43_phy_write(dev, B43_NPHY_RFCTL_RSSIO2, regs[6]);
+ b43_phy_write(dev, B43_NPHY_TXF_40CO_B1S1, regs[7]);
+ b43_phy_write(dev, B43_NPHY_RFCTL_OVER, regs[8]);
+ b43_phy_write(dev, B43_NPHY_PAPD_EN0, regs[9]);
+ b43_phy_write(dev, B43_NPHY_PAPD_EN1, regs[10]);
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RxCalPhySetup */
+static void b43_nphy_rx_cal_phy_setup(struct b43_wldev *dev, u8 core)
+{
+ u8 rxval, txval;
+ u16 *regs = dev->phy.n->tx_rx_cal_phy_saveregs;
+
+ regs[0] = b43_phy_read(dev, B43_NPHY_RFSEQCA);
+ if (core == 0) {
+ regs[1] = b43_phy_read(dev, B43_NPHY_AFECTL_C1);
+ regs[2] = b43_phy_read(dev, B43_NPHY_AFECTL_OVER1);
+ } else {
+ regs[1] = b43_phy_read(dev, B43_NPHY_AFECTL_C2);
+ regs[2] = b43_phy_read(dev, B43_NPHY_AFECTL_OVER);
+ }
+ regs[3] = b43_phy_read(dev, B43_NPHY_RFCTL_INTC1);
+ regs[4] = b43_phy_read(dev, B43_NPHY_RFCTL_INTC2);
+ regs[5] = b43_phy_read(dev, B43_NPHY_RFCTL_RSSIO1);
+ regs[6] = b43_phy_read(dev, B43_NPHY_RFCTL_RSSIO2);
+ regs[7] = b43_phy_read(dev, B43_NPHY_TXF_40CO_B1S1);
+ regs[8] = b43_phy_read(dev, B43_NPHY_RFCTL_OVER);
+ regs[9] = b43_phy_read(dev, B43_NPHY_PAPD_EN0);
+ regs[10] = b43_phy_read(dev, B43_NPHY_PAPD_EN1);
+
+ b43_phy_mask(dev, B43_NPHY_PAPD_EN0, ~0x0001);
+ b43_phy_mask(dev, B43_NPHY_PAPD_EN1, ~0x0001);
+
+ b43_phy_maskset(dev, B43_NPHY_RFSEQCA, (u16)~B43_NPHY_RFSEQCA_RXDIS,
+ ((1 - core) << B43_NPHY_RFSEQCA_RXDIS_SHIFT));
+ b43_phy_maskset(dev, B43_NPHY_R