diff options
Diffstat (limited to 'drivers/net/wireless/b43/phy_lp.c')
| -rw-r--r-- | drivers/net/wireless/b43/phy_lp.c | 395 |
1 files changed, 392 insertions, 3 deletions
diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c index c5d9dc3667c..58e319d6b1e 100644 --- a/drivers/net/wireless/b43/phy_lp.c +++ b/drivers/net/wireless/b43/phy_lp.c @@ -3,7 +3,7 @@ Broadcom B43 wireless driver IEEE 802.11g LP-PHY driver - Copyright (c) 2008 Michael Buesch <mb@bu3sch.de> + Copyright (c) 2008-2009 Michael Buesch <mb@bu3sch.de> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -23,8 +23,10 @@ */ #include "b43.h" +#include "main.h" #include "phy_lp.h" #include "phy_common.h" +#include "tables_lpphy.h" static int b43_lpphy_op_allocate(struct b43_wldev *dev) @@ -57,9 +59,394 @@ static void b43_lpphy_op_free(struct b43_wldev *dev) dev->phy.lp = NULL; } -static int b43_lpphy_op_init(struct b43_wldev *dev) +static void lpphy_table_init(struct b43_wldev *dev) +{ + //TODO +} + +static void lpphy_baseband_rev0_1_init(struct b43_wldev *dev) +{ + B43_WARN_ON(1);//TODO rev < 2 not supported, yet. +} + +static void lpphy_baseband_rev2plus_init(struct b43_wldev *dev) +{ + struct ssb_bus *bus = dev->dev->bus; + struct b43_phy_lp *lpphy = dev->phy.lp; + + b43_phy_write(dev, B43_LPPHY_AFE_DAC_CTL, 0x50); + b43_phy_write(dev, B43_LPPHY_AFE_CTL, 0x8800); + b43_phy_write(dev, B43_LPPHY_AFE_CTL_OVR, 0); + b43_phy_write(dev, B43_LPPHY_AFE_CTL_OVRVAL, 0); + b43_phy_write(dev, B43_LPPHY_RF_OVERRIDE_0, 0); + b43_phy_write(dev, B43_LPPHY_RF_OVERRIDE_2, 0); + b43_phy_write(dev, B43_PHY_OFDM(0xF9), 0); + b43_phy_write(dev, B43_LPPHY_TR_LOOKUP_1, 0); + b43_phy_set(dev, B43_LPPHY_ADC_COMPENSATION_CTL, 0x10); + b43_phy_maskset(dev, B43_LPPHY_OFDMSYNCTHRESH0, 0xFF00, 0x78); + b43_phy_maskset(dev, B43_LPPHY_DCOFFSETTRANSIENT, 0xF8FF, 0x200); + b43_phy_maskset(dev, B43_LPPHY_DCOFFSETTRANSIENT, 0xFF00, 0x7F); + b43_phy_maskset(dev, B43_LPPHY_GAINDIRECTMISMATCH, 0xFF0F, 0x40); + b43_phy_maskset(dev, B43_LPPHY_PREAMBLECONFIRMTO, 0xFF00, 0x2); + b43_phy_mask(dev, B43_LPPHY_CRSGAIN_CTL, ~0x4000); + b43_phy_mask(dev, B43_LPPHY_CRSGAIN_CTL, ~0x2000); + b43_phy_set(dev, B43_PHY_OFDM(0x10A), 0x1); + b43_phy_maskset(dev, B43_PHY_OFDM(0x10A), 0xFF01, 0x10); + b43_phy_maskset(dev, B43_PHY_OFDM(0xDF), 0xFF00, 0xF4); + b43_phy_maskset(dev, B43_PHY_OFDM(0xDF), 0x00FF, 0xF100); + b43_phy_write(dev, B43_LPPHY_CLIPTHRESH, 0x48); + b43_phy_maskset(dev, B43_LPPHY_HIGAINDB, 0xFF00, 0x46); + b43_phy_maskset(dev, B43_PHY_OFDM(0xE4), 0xFF00, 0x10); + b43_phy_maskset(dev, B43_LPPHY_PWR_THRESH1, 0xFFF0, 0x9); + b43_phy_mask(dev, B43_LPPHY_GAINDIRECTMISMATCH, ~0xF); + b43_phy_maskset(dev, B43_LPPHY_VERYLOWGAINDB, 0x00FF, 0x5500); + b43_phy_maskset(dev, B43_LPPHY_CLIPCTRTHRESH, 0xF81F, 0xA0); + b43_phy_maskset(dev, B43_LPPHY_GAINDIRECTMISMATCH, 0xE0FF, 0x300); + b43_phy_maskset(dev, B43_LPPHY_HIGAINDB, 0x00FF, 0x2A00); + if ((bus->chip_id == 0x4325) && (bus->chip_rev == 0)) { + b43_phy_maskset(dev, B43_LPPHY_LOWGAINDB, 0x00FF, 0x2100); + b43_phy_maskset(dev, B43_LPPHY_VERYLOWGAINDB, 0xFF00, 0xA); + } else { + b43_phy_maskset(dev, B43_LPPHY_LOWGAINDB, 0x00FF, 0x1E00); + b43_phy_maskset(dev, B43_LPPHY_VERYLOWGAINDB, 0xFF00, 0xD); + } + b43_phy_maskset(dev, B43_PHY_OFDM(0xFE), 0xFFE0, 0x1F); + b43_phy_maskset(dev, B43_PHY_OFDM(0xFF), 0xFFE0, 0xC); + b43_phy_maskset(dev, B43_PHY_OFDM(0x100), 0xFF00, 0x19); + b43_phy_maskset(dev, B43_PHY_OFDM(0xFF), 0x03FF, 0x3C00); + b43_phy_maskset(dev, B43_PHY_OFDM(0xFE), 0xFC1F, 0x3E0); + b43_phy_maskset(dev, B43_PHY_OFDM(0xFF), 0xFFE0, 0xC); + b43_phy_maskset(dev, B43_PHY_OFDM(0x100), 0x00FF, 0x1900); + b43_phy_maskset(dev, B43_LPPHY_CLIPCTRTHRESH, 0x83FF, 0x5800); + b43_phy_maskset(dev, B43_LPPHY_CLIPCTRTHRESH, 0xFFE0, 0x12); + b43_phy_maskset(dev, B43_LPPHY_GAINMISMATCH, 0x0FFF, 0x9000); + + b43_lptab_write(dev, B43_LPTAB16(0x08, 0x14), 0); + b43_lptab_write(dev, B43_LPTAB16(0x08, 0x12), 0x40); + + if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) { + b43_phy_set(dev, B43_LPPHY_CRSGAIN_CTL, 0x40); + b43_phy_maskset(dev, B43_LPPHY_CRSGAIN_CTL, 0xF0FF, 0xB00); + b43_phy_maskset(dev, B43_LPPHY_SYNCPEAKCNT, 0xFFF8, 0x6); + b43_phy_maskset(dev, B43_LPPHY_MINPWR_LEVEL, 0x00FF, 0x9D00); + b43_phy_maskset(dev, B43_LPPHY_MINPWR_LEVEL, 0xFF00, 0xA1); + } else /* 5GHz */ + b43_phy_mask(dev, B43_LPPHY_CRSGAIN_CTL, ~0x40); + + b43_phy_maskset(dev, B43_LPPHY_CRS_ED_THRESH, 0xFF00, 0xB3); + b43_phy_maskset(dev, B43_LPPHY_CRS_ED_THRESH, 0x00FF, 0xAD00); + b43_phy_maskset(dev, B43_LPPHY_INPUT_PWRDB, 0xFF00, lpphy->rx_pwr_offset); + b43_phy_set(dev, B43_LPPHY_RESET_CTL, 0x44); + b43_phy_write(dev, B43_LPPHY_RESET_CTL, 0x80); + b43_phy_write(dev, B43_LPPHY_AFE_RSSI_CTL_0, 0xA954); + b43_phy_write(dev, B43_LPPHY_AFE_RSSI_CTL_1, + 0x2000 | ((u16)lpphy->rssi_gs << 10) | + ((u16)lpphy->rssi_vc << 4) | lpphy->rssi_vf); +} + +static void lpphy_baseband_init(struct b43_wldev *dev) +{ + lpphy_table_init(dev); + if (dev->phy.rev >= 2) + lpphy_baseband_rev2plus_init(dev); + else + lpphy_baseband_rev0_1_init(dev); +} + +struct b2062_freqdata { + u16 freq; + u8 data[6]; +}; + +/* Initialize the 2062 radio. */ +static void lpphy_2062_init(struct b43_wldev *dev) +{ + struct ssb_bus *bus = dev->dev->bus; + u32 crystalfreq, pdiv, tmp, ref; + unsigned int i; + const struct b2062_freqdata *fd = NULL; + + static const struct b2062_freqdata freqdata_tab[] = { + { .freq = 12000, .data[0] = 6, .data[1] = 6, .data[2] = 6, + .data[3] = 6, .data[4] = 10, .data[5] = 6, }, + { .freq = 13000, .data[0] = 4, .data[1] = 4, .data[2] = 4, + .data[3] = 4, .data[4] = 11, .data[5] = 7, }, + { .freq = 14400, .data[0] = 3, .data[1] = 3, .data[2] = 3, + .data[3] = 3, .data[4] = 12, .data[5] = 7, }, + { .freq = 16200, .data[0] = 3, .data[1] = 3, .data[2] = 3, + .data[3] = 3, .data[4] = 13, .data[5] = 8, }, + { .freq = 18000, .data[0] = 2, .data[1] = 2, .data[2] = 2, + .data[3] = 2, .data[4] = 14, .data[5] = 8, }, + { .freq = 19200, .data[0] = 1, .data[1] = 1, .data[2] = 1, + .data[3] = 1, .data[4] = 14, .data[5] = 9, }, + }; + + b2062_upload_init_table(dev); + + b43_radio_write(dev, B2062_N_TX_CTL3, 0); + b43_radio_write(dev, B2062_N_TX_CTL4, 0); + b43_radio_write(dev, B2062_N_TX_CTL5, 0); + b43_radio_write(dev, B2062_N_PDN_CTL0, 0x40); + b43_radio_write(dev, B2062_N_PDN_CTL0, 0); + b43_radio_write(dev, B2062_N_CALIB_TS, 0x10); + b43_radio_write(dev, B2062_N_CALIB_TS, 0); + if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) + b43_radio_set(dev, B2062_N_TSSI_CTL0, 0x1); + else + b43_radio_mask(dev, B2062_N_TSSI_CTL0, ~0x1); + + /* Get the crystal freq, in Hz. */ + crystalfreq = bus->chipco.pmu.crystalfreq * 1000; + + B43_WARN_ON(!(bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU)); + B43_WARN_ON(crystalfreq == 0); + + if (crystalfreq >= 30000000) { + pdiv = 1; + b43_radio_mask(dev, B2062_S_RFPLL_CTL1, 0xFFFB); + } else { + pdiv = 2; + b43_radio_set(dev, B2062_S_RFPLL_CTL1, 0x4); + } + + tmp = (800000000 * pdiv + crystalfreq) / (32000000 * pdiv); + tmp = (tmp - 1) & 0xFF; + b43_radio_write(dev, B2062_S_RFPLL_CTL18, tmp); + + tmp = (2 * crystalfreq + 1000000 * pdiv) / (2000000 * pdiv); + tmp = ((tmp & 0xFF) - 1) & 0xFFFF; + b43_radio_write(dev, B2062_S_RFPLL_CTL19, tmp); + + ref = (1000 * pdiv + 2 * crystalfreq) / (2000 * pdiv); + ref &= 0xFFFF; + for (i = 0; i < ARRAY_SIZE(freqdata_tab); i++) { + if (ref < freqdata_tab[i].freq) { + fd = &freqdata_tab[i]; + break; + } + } + if (!fd) + fd = &freqdata_tab[ARRAY_SIZE(freqdata_tab) - 1]; + b43dbg(dev->wl, "b2062: Using crystal tab entry %u kHz.\n", + fd->freq); /* FIXME: Keep this printk until the code is fully debugged. */ + + b43_radio_write(dev, B2062_S_RFPLL_CTL8, + ((u16)(fd->data[1]) << 4) | fd->data[0]); + b43_radio_write(dev, B2062_S_RFPLL_CTL9, + ((u16)(fd->data[3]) << 4) | fd->data[2]); + b43_radio_write(dev, B2062_S_RFPLL_CTL10, fd->data[4]); + b43_radio_write(dev, B2062_S_RFPLL_CTL11, fd->data[5]); +} + +/* Initialize the 2063 radio. */ +static void lpphy_2063_init(struct b43_wldev *dev) { //TODO +} + +static void lpphy_sync_stx(struct b43_wldev *dev) +{ + //TODO +} + +static void lpphy_radio_init(struct b43_wldev *dev) +{ + /* The radio is attached through the 4wire bus. */ + b43_phy_set(dev, B43_LPPHY_FOURWIRE_CTL, 0x2); + udelay(1); + b43_phy_mask(dev, B43_LPPHY_FOURWIRE_CTL, 0xFFFD); + udelay(1); + + if (dev->phy.rev < 2) { + lpphy_2062_init(dev); + } else { + lpphy_2063_init(dev); + lpphy_sync_stx(dev); + b43_phy_write(dev, B43_PHY_OFDM(0xF0), 0x5F80); + b43_phy_write(dev, B43_PHY_OFDM(0xF1), 0); + //TODO Do something on the backplane + } +} + +/* Read the TX power control mode from hardware. */ +static void lpphy_read_tx_pctl_mode_from_hardware(struct b43_wldev *dev) +{ + struct b43_phy_lp *lpphy = dev->phy.lp; + u16 ctl; + + ctl = b43_phy_read(dev, B43_LPPHY_TX_PWR_CTL_CMD); + switch (ctl & B43_LPPHY_TX_PWR_CTL_CMD_MODE) { + case B43_LPPHY_TX_PWR_CTL_CMD_MODE_OFF: + lpphy->txpctl_mode = B43_LPPHY_TXPCTL_OFF; + break; + case B43_LPPHY_TX_PWR_CTL_CMD_MODE_SW: + lpphy->txpctl_mode = B43_LPPHY_TXPCTL_SW; + break; + case B43_LPPHY_TX_PWR_CTL_CMD_MODE_HW: + lpphy->txpctl_mode = B43_LPPHY_TXPCTL_HW; + break; + default: + lpphy->txpctl_mode = B43_LPPHY_TXPCTL_UNKNOWN; + B43_WARN_ON(1); + break; + } +} + +/* Set the TX power control mode in hardware. */ +static void lpphy_write_tx_pctl_mode_to_hardware(struct b43_wldev *dev) +{ + struct b43_phy_lp *lpphy = dev->phy.lp; + u16 ctl; + + switch (lpphy->txpctl_mode) { + case B43_LPPHY_TXPCTL_OFF: + ctl = B43_LPPHY_TX_PWR_CTL_CMD_MODE_OFF; + break; + case B43_LPPHY_TXPCTL_HW: + ctl = B43_LPPHY_TX_PWR_CTL_CMD_MODE_HW; + break; + case B43_LPPHY_TXPCTL_SW: + ctl = B43_LPPHY_TX_PWR_CTL_CMD_MODE_SW; + break; + default: + ctl = 0; + B43_WARN_ON(1); + } + b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_CMD, + (u16)~B43_LPPHY_TX_PWR_CTL_CMD_MODE, ctl); +} + +static void lpphy_set_tx_power_control(struct b43_wldev *dev, + enum b43_lpphy_txpctl_mode mode) +{ + struct b43_phy_lp *lpphy = dev->phy.lp; + enum b43_lpphy_txpctl_mode oldmode; + + oldmode = lpphy->txpctl_mode; + lpphy_read_tx_pctl_mode_from_hardware(dev); + if (lpphy->txpctl_mode == mode) + return; + lpphy->txpctl_mode = mode; + + if (oldmode == B43_LPPHY_TXPCTL_HW) { + //TODO Update TX Power NPT + //TODO Clear all TX Power offsets + } else { + if (mode == B43_LPPHY_TXPCTL_HW) { + //TODO Recalculate target TX power + b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_CMD, + 0xFF80, lpphy->tssi_idx); + b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_NNUM, + 0x8FFF, ((u16)lpphy->tssi_npt << 16)); + //TODO Set "TSSI Transmit Count" variable to total transmitted frame count + //TODO Disable TX gain override + lpphy->tx_pwr_idx_over = -1; + } + } + if (dev->phy.rev >= 2) { + if (mode == B43_LPPHY_TXPCTL_HW) + b43_phy_maskset(dev, B43_PHY_OFDM(0xD0), 0xFD, 0x2); + else + b43_phy_maskset(dev, B43_PHY_OFDM(0xD0), 0xFD, 0); + } + lpphy_write_tx_pctl_mode_to_hardware(dev); +} + +static void lpphy_set_tx_power_by_index(struct b43_wldev *dev, u8 index) +{ + struct b43_phy_lp *lpphy = dev->phy.lp; + + lpphy->tx_pwr_idx_over = index; + if (lpphy->txpctl_mode != B43_LPPHY_TXPCTL_OFF) + lpphy_set_tx_power_control(dev, B43_LPPHY_TXPCTL_SW); + + //TODO +} + +static void lpphy_btcoex_override(struct b43_wldev *dev) +{ + b43_write16(dev, B43_MMIO_BTCOEX_CTL, 0x3); + b43_write16(dev, B43_MMIO_BTCOEX_TXCTL, 0xFF); +} + +static void lpphy_pr41573_workaround(struct b43_wldev *dev) +{ + struct b43_phy_lp *lpphy = dev->phy.lp; + u32 *saved_tab; + const unsigned int saved_tab_size = 256; + enum b43_lpphy_txpctl_mode txpctl_mode; + s8 tx_pwr_idx_over; + u16 tssi_npt, tssi_idx; + + saved_tab = kcalloc(saved_tab_size, sizeof(saved_tab[0]), GFP_KERNEL); + if (!saved_tab) { + b43err(dev->wl, "PR41573 failed. Out of memory!\n"); + return; + } + + lpphy_read_tx_pctl_mode_from_hardware(dev); + txpctl_mode = lpphy->txpctl_mode; + tx_pwr_idx_over = lpphy->tx_pwr_idx_over; + tssi_npt = lpphy->tssi_npt; + tssi_idx = lpphy->tssi_idx; + + if (dev->phy.rev < 2) { + b43_lptab_read_bulk(dev, B43_LPTAB32(10, 0x140), + saved_tab_size, saved_tab); + } else { + b43_lptab_read_bulk(dev, B43_LPTAB32(7, 0x140), + saved_tab_size, saved_tab); + } + //TODO + + kfree(saved_tab); +} + +static void lpphy_calibration(struct b43_wldev *dev) +{ + struct b43_phy_lp *lpphy = dev->phy.lp; + enum b43_lpphy_txpctl_mode saved_pctl_mode; + + b43_mac_suspend(dev); + + lpphy_btcoex_override(dev); + lpphy_read_tx_pctl_mode_from_hardware(dev); + saved_pctl_mode = lpphy->txpctl_mode; + lpphy_set_tx_power_control(dev, B43_LPPHY_TXPCTL_OFF); + //TODO Perform transmit power table I/Q LO calibration + if ((dev->phy.rev == 0) && (saved_pctl_mode != B43_LPPHY_TXPCTL_OFF)) + lpphy_pr41573_workaround(dev); + //TODO If a full calibration has not been performed on this channel yet, perform PAPD TX-power calibration + lpphy_set_tx_power_control(dev, saved_pctl_mode); + //TODO Perform I/Q calibration with a single control value set + + b43_mac_enable(dev); +} + +/* Initialize TX power control */ +static void lpphy_tx_pctl_init(struct b43_wldev *dev) +{ + if (0/*FIXME HWPCTL capable */) { + //TODO + } else { /* This device is only software TX power control capable. */ + if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) { + //TODO + } else { + //TODO + } + //TODO set BB multiplier to 0x0096 + } +} + +static int b43_lpphy_op_init(struct b43_wldev *dev) +{ + /* TODO: band SPROM */ + lpphy_baseband_init(dev); + lpphy_radio_init(dev); + //TODO calibrate RC + //TODO set channel + lpphy_tx_pctl_init(dev); + //TODO full calib return 0; } @@ -115,7 +502,9 @@ static int b43_lpphy_op_switch_channel(struct b43_wldev *dev, static unsigned int b43_lpphy_op_get_default_chan(struct b43_wldev *dev) { - return 1; /* Default to channel 1 */ + if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) + return 1; + return 36; } static void b43_lpphy_op_set_rx_antenna(struct b43_wldev *dev, int antenna) |