0 files changed, 0 insertions, 0 deletions
diff --git a/CREDITS b/CREDITS
index d8fe12a9421..2346b09ca8b 100644
--- a/CREDITS
+++ b/CREDITS
@@ -1823,6 +1823,11 @@ S: Kattreinstr 38
 S: D-64295
 S: Germany
 
+N: Avi Kivity
+E: avi.kivity@gmail.com
+D: Kernel-based Virtual Machine (KVM)
+S: Ra'annana, Israel
+
 N: Andi Kleen
 E: andi@firstfloor.org
 U: http://www.halobates.de
diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards
index fc81a7d6b0f..db5858e32d3 100644
--- a/Documentation/devicetree/bindings/arm/arm-boards
+++ b/Documentation/devicetree/bindings/arm/arm-boards
@@ -9,6 +9,10 @@ Required properties (in root node):
 
 FPGA type interrupt controllers, see the versatile-fpga-irq binding doc.
 
+In the root node the Integrator/CP must have a /cpcon node pointing
+to the CP control registers, and the Integrator/AP must have a
+/syscon node pointing to the Integrator/AP system controller.
+
 
 ARM Versatile Application and Platform Baseboards
 -------------------------------------------------
diff --git a/Documentation/devicetree/bindings/arm/davinci.txt b/Documentation/devicetree/bindings/arm/davinci.txt
new file mode 100644
index 00000000000..cfaeda4274e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/davinci.txt
@@ -0,0 +1,17 @@
+Texas Instruments DaVinci Platforms Device Tree Bindings
+--------------------------------------------------------
+
+DA850/OMAP-L138/AM18x Evaluation Module (EVM) board
+Required root node properties:
+    - compatible = "ti,da850-evm", "ti,da850";
+
+EnBW AM1808 based CMC board
+Required root node properties:
+    - compatible = "enbw,cmc", "ti,da850;
+
+Generic DaVinci Boards
+----------------------
+
+DA850/OMAP-L138/AM18x generic board
+Required root node properties:
+    - compatible = "ti,da850";
diff --git a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
index 6528e215c5f..5216b419016 100644
--- a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
+++ b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
@@ -4,14 +4,13 @@ Exynos processors include support for multiple power domains which are used
 to gate power to one or more peripherals on the processor.
 
 Required Properties:
-- compatiable: should be one of the following.
+- compatible: should be one of the following.
     * samsung,exynos4210-pd - for exynos4210 type power domain.
 - reg: physical base address of the controller and length of memory mapped
     region.
 
-Optional Properties:
-- samsung,exynos4210-pd-off: Specifies that the power domain is in turned-off
-    state during boot and remains to be turned-off until explicitly turned-on.
+Node of a device using power domains must have a samsung,power-domain property
+defined with a phandle to respective power domain.
 
 Example:
 
@@ -19,3 +18,11 @@ Example:
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10023C00 0x10>;
 	};
+
+Example of the node using power domain:
+
+	node {
+		/* ... */
+		samsung,power-domain = <&lcd0>;
+		/* ... */
+	};
diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
index ac9e7516756..f79818711e8 100644
--- a/Documentation/devicetree/bindings/arm/fsl.txt
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -41,6 +41,10 @@ i.MX6 Quad SABRE Smart Device Board
 Required root node properties:
     - compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
 
+i.MX6 Quad SABRE Automotive Board
+Required root node properties:
+    - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
+
 Generic i.MX boards
 -------------------
 
diff --git a/Documentation/devicetree/bindings/arm/omap/counter.txt b/Documentation/devicetree/bindings/arm/omap/counter.txt
new file mode 100644
index 00000000000..5bd8aa09131
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/counter.txt
@@ -0,0 +1,15 @@
+OMAP Counter-32K bindings
+
+Required properties:
+- compatible:	Must be "ti,omap-counter32k" for OMAP controllers
+- reg:		Contains timer register address range (base address and length)
+- ti,hwmods:	Name of the hwmod associated to the counter, which is typically
+		"counter_32k"
+
+Example:
+
+counter32k: counter@4a304000 {
+	compatible = "ti,omap-counter32k";
+	reg = <0x4a304000 0x20>;
+	ti,hwmods = "counter_32k";
+};
diff --git a/Documentation/devicetree/bindings/arm/omap/timer.txt b/Documentation/devicetree/bindings/arm/omap/timer.txt
new file mode 100644
index 00000000000..8732d4d41f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/timer.txt
@@ -0,0 +1,31 @@
+OMAP Timer bindings
+
+Required properties:
+- compatible:		Must be "ti,omap2-timer" for OMAP2+ controllers.
+- reg:			Contains timer register address range (base address and
+			length).
+- interrupts: 		Contains the interrupt information for the timer. The
+			format is being dependent on which interrupt controller
+			the OMAP device uses.
+- ti,hwmods:		Name of the hwmod associated to the timer, "timer<X>",
+			where <X> is the instance number of the timer from the
+			HW spec.
+
+Optional properties:
+- ti,timer-alwon:	Indicates the timer is in an alway-on power domain.
+- ti,timer-dsp:		Indicates the timer can interrupt the on-chip DSP in
+			addition to the ARM CPU.
+- ti,timer-pwm: 	Indicates the timer can generate a PWM output.
+- ti,timer-secure: 	Indicates the timer is reserved on a secure OMAP device
+			and therefore cannot be used by the kernel.
+
+Example:
+
+timer12: timer@48304000 {
+	compatible = "ti,omap2-timer";
+	reg = <0x48304000 0x400>;
+	interrupts = <95>;
+	ti,hwmods = "timer12"
+	ti,timer-alwon;
+	ti,timer-secure;
+};
diff --git a/Documentation/devicetree/bindings/ata/exynos-sata-phy.txt b/Documentation/devicetree/bindings/ata/exynos-sata-phy.txt
new file mode 100644
index 00000000000..37824fac688
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/exynos-sata-phy.txt
@@ -0,0 +1,14 @@
+* Samsung SATA PHY Controller
+
+SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers.
+Each SATA PHY controller should have its own node.
+
+Required properties:
+- compatible        : compatible list, contains "samsung,exynos5-sata-phy"
+- reg               : <registers mapping>
+
+Example:
+        sata@ffe07000 {
+                compatible = "samsung,exynos5-sata-phy";
+                reg = <0xffe07000 0x1000>;
+        };
diff --git a/Documentation/devicetree/bindings/ata/exynos-sata.txt b/Documentation/devicetree/bindings/ata/exynos-sata.txt
new file mode 100644
index 00000000000..0849f1025e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/exynos-sata.txt
@@ -0,0 +1,17 @@
+* Samsung AHCI SATA Controller
+
+SATA nodes are defined to describe on-chip Serial ATA controllers.
+Each SATA controller should have its own node.
+
+Required properties:
+- compatible        : compatible list, contains "samsung,exynos5-sata"
+- interrupts        : <interrupt mapping for SATA IRQ>
+- reg               : <registers mapping>
+- samsung,sata-freq : <frequency in MHz>
+
+Example:
+        sata@ffe08000 {
+                compatible = "samsung,exynos5-sata";
+                reg = <0xffe08000 0x1000>;
+                interrupts = <115>;
+        };
diff --git a/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
index d2fe064a828..63dd8051521 100644
--- a/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
+++ b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
@@ -2,9 +2,27 @@
 
 properties:
 - compatible : Should be "ti,omap-ocp2scp"
+- reg : Address and length of the register set for the device
 - #address-cells, #size-cells : Must be present if the device has sub-nodes
 - ranges : the child address space are mapped 1:1 onto the parent address space
 - ti,hwmods : must be "ocp2scp_usb_phy"
 
 Sub-nodes:
 All the devices connected to ocp2scp are described using sub-node to ocp2scp
+
+ocp2scp@4a0ad000 {
+	compatible = "ti,omap-ocp2scp";
+	reg = <0x4a0ad000 0x1f>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+	ti,hwmods = "ocp2scp_usb_phy";
+
+	subnode1 {
+	...
+	};
+
+	subnode2 {
+	...
+	};
+};
diff --git a/Documentation/devicetree/bindings/clock/imx25-clock.txt b/Documentation/devicetree/bindings/clock/imx25-clock.txt
new file mode 100644
index 00000000000..c2a3525ecb4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx25-clock.txt
@@ -0,0 +1,162 @@
+* Clock bindings for Freescale i.MX25
+
+Required properties:
+- compatible: Should be "fsl,imx25-ccm"
+- reg: Address and length of the register set
+- interrupts: Should contain CCM interrupt
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.  The following is a full list of i.MX25
+clocks and IDs.
+
+	Clock			ID
+	---------------------------
+	dummy			0
+	osc			1
+	mpll			2
+	upll			3
+	mpll_cpu_3_4		4
+	cpu_sel			5
+	cpu			6
+	ahb			7
+	usb_div			8
+	ipg			9
+	per0_sel		10
+	per1_sel		11
+	per2_sel		12
+	per3_sel		13
+	per4_sel		14
+	per5_sel		15
+	per6_sel		16
+	per7_sel		17
+	per8_sel		18
+	per9_sel		19
+	per10_sel		20
+	per11_sel		21
+	per12_sel		22
+	per13_sel		23
+	per14_sel		24
+	per15_sel		25
+	per0			26
+	per1			27
+	per2			28
+	per3			29
+	per4			30
+	per5			31
+	per6			32
+	per7			33
+	per8			34
+	per9			35
+	per10			36
+	per11			37
+	per12			38
+	per13			39
+	per14			40
+	per15			41
+	csi_ipg_per		42
+	epit_ipg_per		43
+	esai_ipg_per		44
+	esdhc1_ipg_per		45
+	esdhc2_ipg_per		46
+	gpt_ipg_per		47
+	i2c_ipg_per		48
+	lcdc_ipg_per		49
+	nfc_ipg_per		50
+	owire_ipg_per		51
+	pwm_ipg_per		52
+	sim1_ipg_per		53
+	sim2_ipg_per		54
+	ssi1_ipg_per		55
+	ssi2_ipg_per		56
+	uart_ipg_per		57
+	ata_ahb			58
+	reserved		59
+	csi_ahb			60
+	emi_ahb			61
+	esai_ahb		62
+	esdhc1_ahb		63
+	esdhc2_ahb		64
+	fec_ahb			65
+	lcdc_ahb		66
+	rtic_ahb		67
+	sdma_ahb		68
+	slcdc_ahb		69
+	usbotg_ahb		70
+	reserved		71
+	reserved		72
+	reserved		73
+	reserved		74
+	can1_ipg		75
+	can2_ipg		76
+	csi_ipg			77
+	cspi1_ipg		78
+	cspi2_ipg		79
+	cspi3_ipg		80
+	dryice_ipg		81
+	ect_ipg			82
+	epit1_ipg		83
+	epit2_ipg		84
+	reserved		85
+	esdhc1_ipg		86
+	esdhc2_ipg		87
+	fec_ipg			88
+	reserved		89
+	reserved		90
+	reserved		91
+	gpt1_ipg		92
+	gpt2_ipg		93
+	gpt3_ipg		94
+	gpt4_ipg		95
+	reserved		96
+	reserved		97
+	reserved		98
+	iim_ipg			99
+	reserved		100
+	reserved		101
+	kpp_ipg			102
+	lcdc_ipg		103
+	reserved		104
+	pwm1_ipg		105
+	pwm2_ipg		106
+	pwm3_ipg		107
+	pwm4_ipg		108
+	rngb_ipg		109
+	reserved		110
+	scc_ipg			111
+	sdma_ipg		112
+	sim1_ipg		113
+	sim2_ipg		114
+	slcdc_ipg		115
+	spba_ipg		116
+	ssi1_ipg		117
+	ssi2_ipg		118
+	tsc_ipg			119
+	uart1_ipg		120
+	uart2_ipg		121
+	uart3_ipg		122
+	uart4_ipg		123
+	uart5_ipg		124
+	reserved		125
+	wdt_ipg			126
+
+Examples:
+
+clks: ccm@53f80000 {
+	compatible = "fsl,imx25-ccm";
+	reg = <0x53f80000 0x4000>;
+	interrupts = <31>;
+	clock-output-names = ...
+			"uart_ipg",
+			"uart_serial",
+			...;
+};
+
+uart1: serial@43f90000 {
+	compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+	reg = <0x43f90000 0x4000>;
+	interrupts = <45>;
+	clocks = <&clks 79>, <&clks 50>;
+	clock-names = "ipg", "per";
+	status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/clock/zynq-7000.txt b/Documentation/devicetree/bindings/clock/zynq-7000.txt
new file mode 100644
index 00000000000..23ae1db1bc1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/zynq-7000.txt
@@ -0,0 +1,55 @@
+Device Tree Clock bindings for the Zynq 7000 EPP
+
+The Zynq EPP has several different clk providers, each with there own bindings.
+The purpose of this document is to document their usage.
+
+See clock_bindings.txt for more information on the generic clock bindings.
+See Chapter 25 of Zynq TRM for more information about Zynq clocks.
+
+== PLLs ==
+
+Used to describe the ARM_PLL, DDR_PLL, and IO_PLL.
+
+Required properties:
+- #clock-cells : shall be 0 (only one clock is output from this node)
+- compatible : "xlnx,zynq-pll"
+- reg : pair of u32 values, which are the address offsets within the SLCR
+        of the relevant PLL_CTRL register and PLL_CFG register respectively
+- clocks : phandle for parent clock.  should be the phandle for ps_clk
+
+Optional properties:
+- clock-output-names : name of the output clock
+
+Example:
+	armpll: armpll {
+		#clock-cells = <0>;
+		compatible = "xlnx,zynq-pll";
+		clocks = <&ps_clk>;
+		reg = <0x100 0x110>;
+		clock-output-names = "armpll";
+	};
+
+== Peripheral clocks ==
+
+Describes clock node for the SDIO, SMC, SPI, QSPI, and UART clocks.
+
+Required properties:
+- #clock-cells : shall be 1
+- compatible : "xlnx,zynq-periph-clock"
+- reg : a single u32 value, describing the offset within the SLCR where
+        the CLK_CTRL register is found for this peripheral
+- clocks : phandle for parent clocks.  should hold phandles for
+           the IO_PLL, ARM_PLL, and DDR_PLL in order
+- clock-output-names : names of the output clock(s).  For peripherals that have
+                       two output clocks (for example, the UART), two clocks
+                       should be listed.
+
+Example:
+	uart_clk: uart_clk {
+		#clock-cells = <1>;
+		compatible = "xlnx,zynq-periph-clock";
+		clocks = <&iopll &armpll &ddrpll>;
+		reg = <0x154>;
+		clock-output-names = "uart0_ref_clk",
+				     "uart1_ref_clk";
+	};
diff --git a/Documentation/devicetree/bindings/drm/exynos/hdmi.txt b/Documentation/devicetree/bindings/drm/exynos/hdmi.txt
new file mode 100644
index 00000000000..589edee3739
--- /dev/null
+++ b/Documentation/devicetree/bindings/drm/exynos/hdmi.txt
@@ -0,0 +1,22 @@
+Device-Tree bindings for drm hdmi driver
+
+Required properties:
+- compatible: value should be "samsung,exynos5-hdmi".
+- reg: physical base address of the hdmi and length of memory mapped
+	region.
+- interrupts: interrupt number to the cpu.
+- hpd-gpio: following information about the hotplug gpio pin.
+	a) phandle of the gpio controller node.
+	b) pin number within the gpio controller.
+	c) pin function mode.
+	d) optional flags and pull up/down.
+	e) drive strength.
+
+Example:
+
+	hdmi {
+		compatible = "samsung,exynos5-hdmi";
+		reg = <0x14530000 0x100000>;
+		interrupts = <0 95 0>;
+		hpd-gpio = <&gpx3 7 0xf 1 3>;
+	};
diff --git a/Documentation/devicetree/bindings/drm/exynos/hdmiddc.txt b/Documentation/devicetree/bindings/drm/exynos/hdmiddc.txt
new file mode 100644
index 00000000000..fa166d94580
--- /dev/null
+++ b/Documentation/devicetree/bindings/drm/exynos/hdmiddc.txt
@@ -0,0 +1,12 @@
+Device-Tree bindings for hdmiddc driver
+
+Required properties:
+- compatible: value should be "samsung,exynos5-hdmiddc".
+- reg: I2C address of the hdmiddc device.
+
+Example:
+
+	hdmiddc {
+		compatible = "samsung,exynos5-hdmiddc";
+		reg = <0x50>;
+	};
diff --git a/Documentation/devicetree/bindings/drm/exynos/hdmiphy.txt b/Documentation/devicetree/bindings/drm/exynos/hdmiphy.txt
new file mode 100644
index 00000000000..858f4f9b902
--- /dev/null
+++ b/Documentation/devicetree/bindings/drm/exynos/hdmiphy.txt
@@ -0,0 +1,12 @@
+Device-Tree bindings for hdmiphy driver
+
+Required properties:
+- compatible: value should be "samsung,exynos5-hdmiphy".
+- reg: I2C address of the hdmiphy device.
+
+Example:
+
+	hdmiphy {
+		compatible = "samsung,exynos5-hdmiphy";
+		reg = <0x38>;
+	};
diff --git a/Documentation/devicetree/bindings/drm/exynos/mixer.txt b/Documentation/devicetree/bindings/drm/exynos/mixer.txt
new file mode 100644
index 00000000000..9b2ea034356
--- /dev/null
+++ b/Documentation/devicetree/bindings/drm/exynos/mixer.txt
@@ -0,0 +1,15 @@
+Device-Tree bindings for mixer driver
+
+Required properties:
+- compatible: value should be "samsung,exynos5-mixer".
+- reg: physical base address of the mixer and length of memory mapped
+	region.
+- interrupts: interrupt number to the cpu.
+
+Example:
+
+	mixer {
+		compatible = "samsung,exynos5-mixer";
+		reg = <0x14450000 0x10000>;
+		interrupts = <0 94 0>;
+	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt b/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt
new file mode 100644
index 00000000000..558cdf3c9ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt
@@ -0,0 +1,22 @@
+GPIO line that should be set high/low to power off a device
+
+Required properties:
+- compatible : should be "gpio-poweroff".
+- gpios : The GPIO to set high/low, see "gpios property" in
+  Documentation/devicetree/bindings/gpio/gpio.txt. If the pin should be
+  low to power down the board set it to "Active Low", otherwise set
+  gpio to "Active High".
+
+Optional properties:
+- input : Initially configure the GPIO line as an input. Only reconfigure
+  it to an output when the pm_power_off function is called. If this optional
+  property is not specified, the GPIO is initialized as an output in its
+  inactive state.
+
+
+Examples:
+
+gpio-poweroff {
+	compatible = "gpio-poweroff";
+	gpios = <&gpio 4 0>; /* GPIO 4 Active Low */
+};
diff --git a/Documentation/devicetree/bindings/gpio/leds-ns2.txt b/Documentation/devicetree/bindings/gpio/leds-ns2.txt
new file mode 100644
index 00000000000..aef3aca34d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/leds-ns2.txt
@@ -0,0 +1,26 @@
+Binding for dual-GPIO LED found on Network Space v2 (and parents).
+
+Required properties:
+- compatible: "lacie,ns2-leds".
+
+Each LED is represented as a sub-node of the ns2-leds device.
+
+Required sub-node properties:
+- cmd-gpio: Command LED GPIO. See OF device-tree GPIO specification.
+- slow-gpio: Slow LED GPIO. See OF device-tree GPIO specification.
+
+Optional sub-node properties:
+- label: Name for this LED. If omitted, the label is taken from the node name.
+- linux,default-trigger: Trigger assigned to the LED.
+
+Example:
+
+ns2-leds {
+	compatible = "lacie,ns2-leds";
+
+	blue-sata {
+		label = "ns2:blue:sata";
+		slow-gpio = <&gpio0 29 0>;
+		cmd-gpio = <&gpio0 30 0>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt b/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
index f3cf43b66f7..3614242e773 100644
--- a/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
@@ -12,13 +12,13 @@ Optional properties:
 Examples:
 
 i2c@83fc4000 { /* I2C2 on i.MX51 */
-	compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+	compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
 	reg = <0x83fc4000 0x4000>;
 	interrupts = <63>;
 };
 
 i2c@70038000 { /* HS-I2C on i.MX51 */
-	compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+	compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
 	reg = <0x70038000 0x4000>;
 	interrupts = <64>;
 	clock-frequency = <400000>;
diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
index 2f5322b119e..446859fcdca 100644
--- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt
+++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
@@ -55,5 +55,7 @@ st-micro,24c256		i2c serial eeprom  (24cxx)
 stm,m41t00		Serial Access TIMEKEEPER
 stm,m41t62		Serial real-time clock (RTC) with alarm
 stm,m41t80		M41T80 - SERIAL ACCESS RTC WITH ALARMS
+taos,tsl2550		Ambient Light Sensor with SMBUS/Two Wire Serial Interface
 ti,tsc2003		I2C Touch-Screen Controller
 ti,tmp102		Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface
+ti,tmp275		Digital Temperature Sensor
diff --git a/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt b/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt
new file mode 100644
index 00000000000..ca5a2c86480
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt
@@ -0,0 +1,28 @@
+* Rohm BU21013 Touch Screen
+
+Required properties:
+ - compatible              : "rohm,bu21013_tp"
+ - reg                     :  I2C device address
+
+Optional properties:
+ - touch-gpio              : GPIO pin registering a touch event
+ - <supply_name>-supply    : Phandle to a regulator supply
+ - rohm,touch-max-x        : Maximum outward permitted limit in the X axis
+ - rohm,touch-max-y        : Maximum outward permitted limit in the Y axis
+ - rohm,flip-x             : Flip touch coordinates on the X axis
+ - rohm,flip-y             : Flip touch coordinates on the Y axis
+
+Example:
+
+	i2c@80110000 {
+		bu21013_tp@0x5c {
+			compatible = "rohm,bu21013_tp";
+			reg = <0x5c>;
+			touch-gpio = <&gpio2 20 0x4>;
+			avdd-supply = <&ab8500_ldo_aux1_reg>;
+
+			rohm,touch-max-x = <384>;
+			rohm,touch-max-y = <704>;
+			rohm,flip-y;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/media/s5p-mfc.txt b/Documentation/devicetree/bindings/media/s5p-mfc.txt
new file mode 100644
index 00000000000..67ec3d4ccc7
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/s5p-mfc.txt
@@ -0,0 +1,23 @@
+* Samsung Multi Format Codec (MFC)
+
+Multi Format Codec (MFC) is the IP present in Samsung SoCs which
+supports high resolution decoding and encoding functionalities.
+The MFC device driver is a v4l2 driver which can encode/decode
+video raw/elementary streams and has support for all popular
+video codecs.
+
+Required properties:
+  - compatible : value should be either one among the following
+	(a) "samsung,mfc-v5" for MFC v5 present in Exynos4 SoCs
+	(b) "samsung,mfc-v6" for MFC v6 present in Exynos5 SoCs
+
+  - reg : Physical base address of the IP registers and length of memory
+	  mapped region.
+
+  - interrupts : MFC interrupt number to the CPU.
+
+  - samsung,mfc-r : Base address of the first memory bank used by MFC
+		    for DMA contiguous memory allocation and its size.
+
+  - samsung,mfc-l : Base address of the second memory bank used by MFC
+		    for DMA contiguous memory allocation and its size.
diff --git a/Documentation/devicetree/bindings/net/mdio-gpio.txt b/Documentation/devicetree/bindings/net/mdio-gpio.txt
index bc954952901..c79bab02536 100644
--- a/Documentation/devicetree/bindings/net/mdio-gpio.txt
+++ b/Documentation/devicetree/bindings/net/mdio-gpio.txt
@@ -8,9 +8,16 @@ gpios property as described in section VIII.1 in the following order:
 
 MDC, MDIO.
 
+Note: Each gpio-mdio bus should have an alias correctly numbered in "aliases"
+node.
+
 Example:
 
-mdio {
+aliases {
+	mdio-gpio0 = <&mdio0>;
+};
+
+mdio0: mdio {
 	compatible = "virtual,mdio-gpio";
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt
index 361bccb7ec8..95daf6335c3 100644
--- a/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt
@@ -7,8 +7,10 @@ Required properties:
 - compatible: "marvell,88f6180-pinctrl",
               "marvell,88f6190-pinctrl", "marvell,88f6192-pinctrl",
               "marvell,88f6281-pinctrl", "marvell,88f6282-pinctrl"
+              "marvell,98dx4122-pinctrl"
 
 This driver supports all kirkwood variants, i.e. 88f6180, 88f619x, and 88f628x.
+It also support the 88f6281-based variant in the 98dx412x Bobcat SoCs.
 
 Available mpp pins/groups and functions:
 Note: brackets (x) are not part of the mpp name for marvell,function and given
@@ -277,3 +279,40 @@ mpp46         46       gpio, ts(mp10), tdm(fs), lcd(hsync)
 mpp47         47       gpio, ts(mp11), tdm(drx), lcd(vsync)
 mpp48         48       gpio, ts(mp12), tdm(dtx), lcd(d16)
 mpp49         49       gpo, tdm(rx0ql), pex(clkreq), lcd(d17)
+
+* Marvell Bobcat 98dx4122
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, nand(io2), spi(cs)
+mpp1          1        gpo, nand(io3), spi(mosi)
+mpp2          2        gpo, nand(io4), spi(sck)
+mpp3          3        gpo, nand(io5), spi(miso)
+mpp4          4        gpio, nand(io6), uart0(rxd)
+mpp5          5        gpo, nand(io7), uart0(txd)
+mpp6          6        sysrst(out), spi(mosi)
+mpp7          7        gpo, pex(rsto), spi(cs)
+mpp8          8        gpio, twsi0(sda), uart0(rts), uart1(rts)
+mpp9          9        gpio, twsi(sck), uart0(cts), uart1(cts)
+mpp10         10       gpo, spi(sck), uart0(txd)
+mpp11         11       gpio, spi(miso), uart0(rxd)
+mpp13         13       gpio, uart1(txd)
+mpp14         14       gpio, uart1(rxd)
+mpp15         15       gpio, uart0(rts)
+mpp16         16       gpio, uart0(cts)
+mpp18         18       gpo, nand(io0)
+mpp19         19       gpo, nand(io1)
+mpp34         34       gpio
+mpp35         35       gpio
+mpp36         36       gpio
+mpp37         37       gpio
+mpp38         38       gpio
+mpp39         39       gpio
+mpp40         40       gpio
+mpp41         41       gpio
+mpp42         42       gpio
+mpp43         43       gpio
+mpp44         44       gpio
+mpp45         45       gpio
+mpp49         49       gpio
+
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
index 03dee50532f..e97a27856b2 100644
--- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
@@ -8,13 +8,20 @@ on-chip controllers onto these pads.
 Required Properties:
 - compatible: should be one of the following.
   - "samsung,pinctrl-exynos4210": for Exynos4210 compatible pin-controller.
+  - "samsung,pinctrl-exynos4x12": for Exynos4x12 compatible pin-controller.
   - "samsung,pinctrl-exynos5250": for Exynos5250 compatible pin-controller.
 
 - reg: Base address of the pin controller hardware module and length of
   the address space it occupies.
 
-- interrupts: interrupt specifier for the controller. The format and value of
-  the interrupt specifier depends on the interrupt parent for the controller.
+- Pin banks as child nodes: Pin banks of the controller are represented by child
+  nodes of the controller node. Bank name is taken from name of the node. Each
+  bank node must contain following properties:
+
+  - gpio-controller: identifies the node as a gpio controller and pin bank.
+  - #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO
+    binding is used, the amount of cells must be specified as 2. See generic
+    GPIO binding documentation for description of particular cells.
 
 - Pin mux/config groups as child nodes: The pin mux (selecting pin function
   mode) and pin config (pull up/down, driver strength) settings are represented
@@ -72,16 +79,24 @@ used as system wakeup events.
 A. External GPIO Interrupts: For supporting external gpio interrupts, the
    following properties should be specified in the pin-controller device node.
 
-- interrupt-controller: identifies the controller node as interrupt-parent.
-- #interrupt-cells: the value of this property should be 2.
-  - First Cell: represents the external gpio interrupt number local to the
-    external gpio interrupt space of the controller.
-  - Second Cell: flags to identify the type of the interrupt
-    - 1 = rising edge triggered
-    - 2 = falling edge triggered
-    - 3 = rising and falling edge triggered
-    - 4 = high level triggered
-    - 8 = low level triggered
+   - interrupt-parent: phandle of the interrupt parent to which the external
+     GPIO interrupts are forwarded to.
+   - interrupts: interrupt specifier for the controller. The format and value of
+     the interrupt specifier depends on the interrupt parent for the controller.
+
+   In addition, following properties must be present in node of every bank
+   of pins supporting GPIO interrupts:
+
+   - interrupt-controller: identifies the controller node as interrupt-parent.
+   - #interrupt-cells: the value of this property should be 2.
+     - First Cell: represents the external gpio interrupt number local to the
+       external gpio interrupt space of the controller.
+     - Second Cell: flags to identify the type of the interrupt
+       - 1 = rising edge triggered
+       - 2 = falling edge triggered
+       - 3 = rising and falling edge triggered
+       - 4 = high level triggered
+       - 8 = low level triggered
 
 B. External Wakeup Interrupts: For supporting external wakeup interrupts, a
    child node representing the external wakeup interrupt controller should be
@@ -94,6 +109,11 @@ B. External Wakeup Interrupts: For supporting external wakeup interrupts, a
        found on Samsung Exynos4210 SoC.
    - interrupt-parent: phandle of the interrupt parent to which the external
      wakeup interrupts are forwarded to.
+   - interrupts: interrupt used by multiplexed wakeup interrupts.
+
+   In addition, following properties must be present in node of every bank
+   of pins supporting wake-up interrupts:
+
    - interrupt-controller: identifies the node as interrupt-parent.
    - #interrupt-cells: the value of this property should be 2
      - First Cell: represents the external wakeup interrupt number local to
@@ -105,11 +125,63 @@ B. External Wakeup Interrupts: For supporting external wakeup interrupts, a
        - 4 = high level triggered
        - 8 = low level triggered
 
+   Node of every bank of pins supporting direct wake-up interrupts (without
+   multiplexing) must contain following properties:
+
+   - interrupt-parent: phandle of the interrupt parent to which the external
+     wakeup interrupts are forwarded to.
+   - interrupts: interrupts of the interrupt parent which are used for external
+     wakeup interrupts from pins of the bank, must contain interrupts for all
+     pins of the bank.
+
 Aliases:
 
 All the pin controller nodes should be represented in the aliases node using
 the following format 'pinctrl{n}' where n is a unique number for the alias.
 
+Example: A pin-controller node with pin banks:
+
+	pinctrl_0: pinctrl@11400000 {
+		compatible = "samsung,pinctrl-exynos4210";
+		reg = <0x11400000 0x1000>;
+		interrupts = <0 47 0>;
+
+		/* ... */
+
+		/* Pin bank without external interrupts */
+		gpy0: gpy0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		/* ... */
+
+		/* Pin bank with external GPIO or muxed wake-up interrupts */
+		gpj0: gpj0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		/* ... */
+
+		/* Pin bank with external direct wake-up interrupts */
+		gpx0: gpx0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
+				     <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
+			#interrupt-cells = <2>;
+		};
+
+		/* ... */
+	};
+
 Example 1: A pin-controller node with pin groups.
 
 	pinctrl_0: pinctrl@11400000 {
@@ -117,6 +189,8 @@ Example 1: A pin-controller node with pin groups.
 		reg = <0x11400000 0x1000>;
 		interrupts = <0 47 0>;
 
+		/* ... */
+
 		uart0_data: uart0-data {
 			samsung,pins = "gpa0-0", "gpa0-1";
 			samsung,pin-function = <2>;
@@ -158,20 +232,14 @@ Example 2: A pin-controller node with external wakeup interrupt controller node.
 	pinctrl_1: pinctrl@11000000 {
 		compatible = "samsung,pinctrl-exynos4210";
 		reg = <0x11000000 0x1000>;
-		interrupts = <0 46 0>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
+		interrupts = <0 46 0>
 
-		wakup_eint: wakeup-interrupt-controller {
+		/* ... */
+
+		wakeup-interrupt-controller {
 			compatible = "samsung,exynos4210-wakeup-eint";
 			interrupt-parent = <&gic>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
-					<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
-					<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
-					<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>,
-					<0 32 0>;
+			interrupts = <0 32 0>;
 		};
 	};
 
@@ -190,7 +258,8 @@ Example 4: Set up the default pin state for uart controller.
 
 	static int s3c24xx_serial_probe(struct platform_device *pdev) {
 		struct pinctrl *pinctrl;
-		...
-		...
+
+		/* ... */
+
 		pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
 	}
diff --git a/Documentation/devicetree/bindings/usb/am33xx-usb.txt b/Documentation/devicetree/bindings/usb/am33xx-usb.txt
index ca8fa56e9f0..707c1a2dae0 100644
--- a/Documentation/devicetree/bindings/usb/am33xx-usb.txt
+++ b/Documentation/devicetree/bindings/usb/am33xx-usb.txt
@@ -1,5 +1,7 @@
 AM33XX MUSB GLUE
  - compatible : Should be "ti,musb-am33xx"
+ - reg : offset and length of register sets, first usbss, then for musb instances
+ - interrupts : usbss, musb instance interrupts in order
  - ti,hwmods : must be "usb_otg_hs"
  - multipoint : Should be "1" indicating the musb controller supports
    multipoint. This is a MUSB configuration-specific setting.
@@ -12,3 +14,22 @@ AM33XX MUSB GLUE
    represents PERIPHERAL.
  - power : Should be "250". This signifies the controller can supply upto
    500mA when operating in host mode.
+
+Example:
+
+usb@47400000  {
+	compatible = "ti,musb-am33xx";
+	reg = <0x47400000 0x1000	/* usbss */
+	       0x47401000 0x800		/* musb instance 0 */
+	       0x47401800 0x800>;	/* musb instance 1 */
+	interrupts = <17		/* usbss */
+		      18		/* musb instance 0 */
+		      19>;		/* musb instance 1 */
+	multipoint = <1>;
+	num-eps = <16>;
+	ram-bits = <12>;
+	port0-mode = <3>;
+	port1-mode = <3>;
+	power = <250>;
+	ti,hwmods = "usb_otg_hs";
+};
diff --git a/Documentation/devicetree/bindings/usb/ehci-orion.txt b/Documentation/devicetree/bindings/usb/ehci-orion.txt
new file mode 100644
index 00000000000..6bc09ec14c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ehci-orion.txt
@@ -0,0 +1,15 @@
+* EHCI controller, Orion Marvell variants
+
+Required properties:
+- compatible: must be "marvell,orion-ehci"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: The EHCI interrupt
+
+Example:
+
+	ehci@50000 {
+		compatible = "marvell,orion-ehci";
+		reg = <0x50000 0x1000>;
+		interrupts = <19>;
+	};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 9de2b9ff9d6..ac2c2c416a1 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -51,4 +51,5 @@ ti	Texas Instruments
 via	VIA Technologies, Inc.
 wlf	Wolfson Microelectronics
 wm	Wondermedia Technologies, Inc.
+winbond Winbond Electronics corp.
 xlnx	Xilinx
diff --git a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
new file mode 100644
index 00000000000..2957ebb5aa7
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
@@ -0,0 +1,15 @@
+* Atmel Watchdog Timers
+
+** at91sam9-wdt
+
+Required properties:
+- compatible: must be "atmel,at91sam9260-wdt".
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+Example:
+
+	watchdog@fffffd40 {
+		compatible = "atmel,at91sam9260-wdt";
+		reg = <0xfffffd40 0x10>;
+	};
diff --git a/Documentation/networking/vxlan.txt b/Documentation/networking/vxlan.txt
index 5b34b762d7d..6d993510f09 100644
--- a/Documentation/networking/vxlan.txt
+++ b/Documentation/networking/vxlan.txt
@@ -32,7 +32,7 @@ no entry is in the forwarding table.
   # ip link delete vxlan0
 
 3. Show vxlan info
-  # ip -d show vxlan0
+  # ip -d link show vxlan0
 
 It is possible to create, destroy and display the vxlan
 forwarding table using the new bridge command.
@@ -41,7 +41,7 @@ forwarding table using the new bridge command.
   # bridge fdb add to 00:17:42:8a:b4:05 dst 192.19.0.2 dev vxlan0
 
 2. Delete forwarding table entry
-  # bridge fdb delete 00:17:42:8a:b4:05
+  # bridge fdb delete 00:17:42:8a:b4:05 dev vxlan0
 
 3. Show forwarding table
   # bridge fdb show dev vxlan0
diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt
index 3b4ee532886..a1cd2f9428d 100644
--- a/Documentation/pinctrl.txt
+++ b/Documentation/pinctrl.txt
@@ -1193,4 +1193,6 @@ foo_switch()
 	...
 }
 
-The above has to be done from process context.
+The above has to be done from process context. The reservation of the pins
+will be done when the state is activated, so in effect one specific pin
+can be used by different functions at different times on a running system.
diff --git a/MAINTAINERS b/MAINTAINERS
index bb0b27db673..140ebd063f1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -526,17 +526,17 @@ F:	drivers/video/geode/
 F:	arch/x86/include/asm/geode.h
 
 AMD IOMMU (AMD-VI)
-M:	Joerg Roedel <joerg.roedel@amd.com>
+M:	Joerg Roedel <joro@8bytes.org>
 L:	iommu@lists.linux-foundation.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
-S:	Supported
+S:	Maintained
 F:	drivers/iommu/amd_iommu*.[ch]
 F:	include/linux/amd-iommu.h
 
 AMD MICROCODE UPDATE SUPPORT
-M:	Andreas Herrmann <andreas.herrmann3@amd.com>
+M:	Andreas Herrmann <herrmann.der.user@googlemail.com>
 L:	amd64-microcode@amd64.org
-S:	Supported
+S:	Maintained
 F:	arch/x86/kernel/microcode_amd.c
 
 AMS (Apple Motion Sensor) DRIVER
@@ -797,7 +797,6 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 T:	git git://git.pengutronix.de/git/imx/linux-2.6.git
 F:	arch/arm/mach-imx/
-F:	arch/arm/plat-mxc/
 F:	arch/arm/configs/imx*_defconfig
 
 ARM/FREESCALE IMX6
@@ -841,6 +840,14 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kristoffer/linux-hpc.git
 F:	arch/arm/mach-sa1100/jornada720.c
 F:	arch/arm/mach-sa1100/include/mach/jornada720.h
 
+ARM/IGEP MACHINE SUPPORT
+M:	Enric Balletbo i Serra <eballetbo@gmail.com>
+M:	Javier Martinez Canillas <javier@dowhile0.org>
+L:	linux-omap@vger.kernel.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-omap2/board-igep0020.c
+
 ARM/INCOME PXA270 SUPPORT
 M:	Marek Vasut <marek.vasut@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -2708,10 +2715,10 @@ F:	include/linux/edac.h
 
 EDAC-AMD64
 M:	Doug Thompson <dougthompson@xmission.com>
-M:	Borislav Petkov <borislav.petkov@amd.com>
+M:	Borislav Petkov <bp@alien8.de>
 L:	linux-edac@vger.kernel.org
 W:	bluesmoke.sourceforge.net
-S:	Supported
+S:	Maintained
 F:	drivers/edac/amd64_edac*
 
 EDAC-E752X
@@ -3753,7 +3760,7 @@ S:	Maintained
 F:	drivers/platform/x86/ideapad-laptop.c
 
 IDE/ATAPI DRIVERS
-M:	Borislav Petkov <petkovbb@gmail.com>
+M:	Borislav Petkov <bp@alien8.de>
 L:	linux-ide@vger.kernel.org
 S:	Maintained
 F:	Documentation/cdrom/ide-cd
@@ -4280,8 +4287,8 @@ F:	include/linux/lockd/
 F:	include/linux/sunrpc/
 
 KERNEL VIRTUAL MACHINE (KVM)
-M:	Avi Kivity <avi@redhat.com>
 M:	Marcelo Tosatti <mtosatti@redhat.com>
+M:	Gleb Natapov <gleb@redhat.com>
 L:	kvm@vger.kernel.org
 W:	http://kvm.qumranet.com
 S:	Supported
@@ -5413,7 +5420,7 @@ S:	Maintained
 F:	sound/drivers/opl4/
 
 OPROFILE
-M:	Robert Richter <robert.richter@amd.com>
+M:	Robert Richter <rric@kernel.org>
 L:	oprofile-list@lists.sf.net
 S:	Maintained
 F:	arch/*/include/asm/oprofile*.h
@@ -8198,7 +8205,7 @@ F:	drivers/platform/x86
 
 X86 MCE INFRASTRUCTURE
 M:	Tony Luck <tony.luck@intel.com>
-M:	Borislav Petkov <bp@amd64.org>
+M:	Borislav Petkov <bp@alien8.de>
 L:	linux-edac@vger.kernel.org
 S:	Maintained
 F:	arch/x86/kernel/cpu/mcheck/*
diff --git a/Makefile b/Makefile
index 9f6ca124e89..3d2fc460b22 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 7
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
 NAME = Terrified Chipmunk
 
 # *DOCUMENTATION*
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index 1e6956a9060..14db93e4c8a 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -445,7 +445,7 @@ struct procfs_args {
  * unhappy with OSF UFS. [CHECKME]
  */
 static int
-osf_ufs_mount(char *dirname, struct ufs_args __user *args, int flags)
+osf_ufs_mount(const char *dirname, struct ufs_args __user *args, int flags)
 {
 	int retval;
 	struct cdfs_args tmp;
@@ -465,7 +465,7 @@ osf_ufs_mount(char *dirname, struct ufs_args __user *args, int flags)
 }
 
 static int
-osf_cdfs_mount(char *dirname, struct cdfs_args __user *args, int flags)
+osf_cdfs_mount(const char *dirname, struct cdfs_args __user *args, int flags)
 {
 	int retval;
 	struct cdfs_args tmp;
@@ -485,7 +485,7 @@ osf_cdfs_mount(char *dirname, struct cdfs_args __user *args, int flags)
 }
 
 static int
-osf_procfs_mount(char *dirname, struct procfs_args __user *args, int flags)
+osf_procfs_mount(const char *dirname, struct procfs_args __user *args, int flags)
 {
 	struct procfs_args tmp;
 
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ade7e924bef..a920f2c422e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -433,19 +433,6 @@ config ARCH_FOOTBRIDGE
 	  Support for systems based on the DC21285 companion chip
 	  ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
 
-config ARCH_MXC
-	bool "Freescale MXC/iMX-based"
-	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
-	select GENERIC_CLOCKEVENTS
-	select GENERIC_IRQ_CHIP
-	select MULTI_IRQ_HANDLER
-	select SPARSE_IRQ
-	select USE_OF
-	help
-	  Support for Freescale MXC/iMX-based family of processors
-
 config ARCH_MXS
 	bool "Freescale MXS-based"
 	select ARCH_REQUIRE_GPIOLIB
@@ -536,6 +523,8 @@ config ARCH_DOVE
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_PCI
+	select PINCTRL
+	select PINCTRL_DOVE
 	select PLAT_ORION_LEGACY
 	select USB_ARCH_HAS_EHCI
 	help
@@ -547,6 +536,8 @@ config ARCH_KIRKWOOD
 	select CPU_FEROCEON
 	select GENERIC_CLOCKEVENTS
 	select PCI
+	select PINCTRL
+	select PINCTRL_KIRKWOOD
 	select PLAT_ORION_LEGACY
 	help
 	  Support for the following Marvell Kirkwood series SoCs:
@@ -924,6 +915,7 @@ config ARCH_DAVINCI
 	select GENERIC_IRQ_CHIP
 	select HAVE_IDE
 	select NEED_MACH_GPIO_H
+	select USE_OF
 	select ZONE_DMA
 	help
 	  Support for TI's DaVinci platform.
@@ -937,7 +929,6 @@ config ARCH_OMAP
 	select CLKSRC_MMIO
 	select GENERIC_CLOCKEVENTS
 	select HAVE_CLK
-	select NEED_MACH_GPIO_H
 	help
 	  Support for TI's OMAP platform (OMAP1/2/3/4).
 
@@ -959,7 +950,7 @@ config ARCH_ZYNQ
 	bool "Xilinx Zynq ARM Cortex A9 Platform"
 	select ARM_AMBA
 	select ARM_GIC
-	select CLKDEV_LOOKUP
+	select COMMON_CLK
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select ICST
@@ -1058,7 +1049,7 @@ source "arch/arm/mach-msm/Kconfig"
 
 source "arch/arm/mach-mv78xx0/Kconfig"
 
-source "arch/arm/plat-mxc/Kconfig"
+source "arch/arm/mach-imx/Kconfig"
 
 source "arch/arm/mach-mxs/Kconfig"
 
@@ -1168,7 +1159,7 @@ config ARM_NR_BANKS
 config IWMMXT
 	bool "Enable iWMMXt support"
 	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4
-	default y if PXA27x || PXA3xx || PXA95x || ARCH_MMP
+	default y if PXA27x || PXA3xx || ARCH_MMP
 	help
 	  Enable support for iWMMXt context switching at run time if
 	  running on a CPU that supports it.
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index b0f3857b3a4..00e9a53888b 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -132,6 +132,23 @@ choice
 		  their output to UART1 serial port on DaVinci TNETV107X
 		  devices.
 
+	config DEBUG_ZYNQ_UART0
+		bool "Kernel low-level debugging on Xilinx Zynq using UART0"
+		depends on ARCH_ZYNQ
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART0 on the Zynq platform.
+
+	config DEBUG_ZYNQ_UART1
+		bool "Kernel low-level debugging on Xilinx Zynq using UART1"
+		depends on ARCH_ZYNQ
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART1 on the Zynq platform.
+
+		  If you have a ZC702 board and want early boot messages to
+		  appear on the USB serial adaptor, select this option.
+
 	config DEBUG_DC21285_PORT
 		bool "Kernel low-level debugging messages via footbridge serial port"
 		depends on FOOTBRIDGE
@@ -209,20 +226,12 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX50 or i.MX53.
 
-	config DEBUG_IMX6Q_UART2
-		bool "i.MX6Q Debug UART2"
+	config DEBUG_IMX6Q_UART
+		bool "i.MX6Q Debug UART"
 		depends on SOC_IMX6Q
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on i.MX6Q UART2. This is correct for e.g. the SabreLite
-                  board.
-
-	config DEBUG_IMX6Q_UART4
-		bool "i.MX6Q Debug UART4"
-		depends on SOC_IMX6Q
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on i.MX6Q UART4.
+		  on i.MX6Q.
 
 	config DEBUG_MMP_UART2
 		bool "Kernel low-level debugging message via MMP UART2"
@@ -409,9 +418,25 @@ choice
 
 endchoice
 
+config DEBUG_IMX6Q_UART_PORT
+	int "i.MX6Q Debug UART Port (1-5)" if DEBUG_IMX6Q_UART
+	range 1 5
+	default 1
+	depends on SOC_IMX6Q
+	help
+	  Choose UART port on which kernel low-level debug messages
+	  should be output.
+
 config DEBUG_LL_INCLUDE
 	string
 	default "debug/icedcc.S" if DEBUG_ICEDCC
+	default "debug/imx.S" if DEBUG_IMX1_UART || \
+				 DEBUG_IMX25_UART || \
+				 DEBUG_IMX21_IMX27_UART || \
+				 DEBUG_IMX31_IMX35_UART || \
+				 DEBUG_IMX51_UART || \
+				 DEBUG_IMX50_IMX53_UART ||\
+				 DEBUG_IMX6Q_UART
 	default "debug/highbank.S" if DEBUG_HIGHBANK_UART
 	default "debug/mvebu.S" if DEBUG_MVEBU_UART
 	default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 5f914fca911..97252d86a70 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -196,10 +196,8 @@ machine-$(CONFIG_ARCH_ZYNQ)		+= zynq
 
 # Platform directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
-plat-$(CONFIG_ARCH_MXC)		+= mxc
 plat-$(CONFIG_ARCH_OMAP)	+= omap
 plat-$(CONFIG_ARCH_S3C64XX)	+= samsung
-plat-$(CONFIG_ARCH_ZYNQ)	+= versatile
 plat-$(CONFIG_PLAT_IOP)		+= iop
 plat-$(CONFIG_PLAT_NOMADIK)	+= nomadik
 plat-$(CONFIG_PLAT_ORION)	+= orion
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index a517153a13e..537208f22e5 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -54,10 +54,6 @@ ifeq ($(CONFIG_ARCH_SA1100),y)
 OBJS		+= head-sa1100.o
 endif
 
-ifeq ($(CONFIG_ARCH_VT8500),y)
-OBJS		+= head-vt8500.o
-endif
-
 ifeq ($(CONFIG_CPU_XSCALE),y)
 OBJS		+= head-xscale.o
 endif
diff --git a/arch/arm/boot/compressed/head-vt8500.S b/arch/arm/boot/compressed/head-vt8500.S
deleted file mode 100644
index 1dc1e21a3be..00000000000
--- a/arch/arm/boot/compressed/head-vt8500.S
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * linux/arch/arm/boot/compressed/head-vt8500.S
- *
- * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * VIA VT8500 specific tweaks. This is merged into head.S by the linker.
- *
- */
-
-#include <linux/linkage.h>
-#include <asm/mach-types.h>
-
-		.section        ".start", "ax"
-
-__VT8500_start:
-	@ Compare the SCC ID register against a list of known values
-	ldr	r1, .SCCID
-	ldr	r3, [r1]
-
-	@ VT8500 override
-	ldr	r4, .VT8500SCC
-	cmp	r3, r4
-	ldreq	r7, .ID_BV07
-	beq	.Lendvt8500
-
-	@ WM8505 override
-	ldr	r4, .WM8505SCC
-	cmp	r3, r4
-	ldreq	r7, .ID_8505
-	beq	.Lendvt8500
-
-	@ Otherwise, leave the bootloader's machine id untouched
-
-.SCCID:
-	.word	0xd8120000
-.VT8500SCC:
-	.word	0x34000102
-.WM8505SCC:
-	.word	0x34260103
-
-.ID_BV07:
-	.word	MACH_TYPE_BV07
-.ID_8505:
-	.word	MACH_TYPE_WM8505_7IN_NETBOOK
-
-.Lendvt8500:
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index f37cf9fa5fa..89dcc14f193 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -17,13 +17,17 @@ dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb \
 	usb_a9263.dtb \
 	usb_a9g20.dtb
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
+dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \
+	da850-evm.dtb
 dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
 	dove-cubox.dtb \
 	dove-dove-db.dtb
 dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
 	exynos4210-smdkv310.dtb \
 	exynos4210-trats.dtb \
-	exynos5250-smdk5250.dtb
+	exynos4412-smdk4412.dtb \
+	exynos5250-smdk5250.dtb \
+	exynos5250-snow.dtb
 dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb
 dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
 	integratorcp.dtb
@@ -36,11 +40,20 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \
 	kirkwood-ib62x0.dtb \
 	kirkwood-iconnect.dtb \
 	kirkwood-iomega_ix2_200.dtb \
+	kirkwood-is2.dtb \
 	kirkwood-km_kirkwood.dtb \
 	kirkwood-lschlv2.dtb \
 	kirkwood-lsxhl.dtb \
+	kirkwood-mplcec4.dtb \
+	kirkwood-ns2.dtb \
+	kirkwood-ns2lite.dtb \
+	kirkwood-ns2max.dtb \
+	kirkwood-ns2mini.dtb \
+	kirkwood-nsa310.dtb \
+	kirkwood-topkick.dtb \
 	kirkwood-ts219-6281.dtb \
-	kirkwood-ts219-6282.dtb
+	kirkwood-ts219-6282.dtb \
+	kirkwood-openblocks_a6.dtb
 dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \
 	msm8960-cdp.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
@@ -51,30 +64,40 @@ dtb-$(CONFIG_ARCH_MXC) += imx51-babbage.dtb \
 	imx53-qsb.dtb \
 	imx53-smd.dtb \
 	imx6q-arm2.dtb \
+	imx6q-sabreauto.dtb \
 	imx6q-sabrelite.dtb \
 	imx6q-sabresd.dtb
 dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
 	imx23-olinuxino.dtb \
 	imx23-stmp378x_devb.dtb \
+	imx28-apf28.dtb \
+	imx28-apf28dev.dtb \
 	imx28-apx4devkit.dtb \
 	imx28-cfa10036.dtb \
 	imx28-cfa10049.dtb \
 	imx28-evk.dtb \
 	imx28-m28evk.dtb \
+	imx28-sps1.dtb \
 	imx28-tx28.dtb
 dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
+	omap3-beagle.dtb \
 	omap3-beagle-xm.dtb \
 	omap3-evm.dtb \
 	omap3-tobi.dtb \
 	omap4-panda.dtb \
-	omap4-pandaES.dtb \
-	omap4-var_som.dtb \
+	omap4-panda-es.dtb \
+	omap4-var-som.dtb \
 	omap4-sdp.dtb \
 	omap5-evm.dtb \
 	am335x-evm.dtb \
+	am335x-evmsk.dtb \
 	am335x-bone.dtb
+dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
 dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
-dtb-$(CONFIG_ARCH_U8500) += snowball.dtb
+dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \
+	hrefprev60.dtb \
+	hrefv60plus.dtb \
+	ccu9540.dtb
 dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
 	r8a7740-armadillo800eva.dtb \
 	sh73a0-kzm9g.dtb
@@ -103,5 +126,6 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \
 dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \
 	wm8505-ref.dtb \
 	wm8650-mid.dtb
+dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb
 
 endif
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index c634f87e230..2c338889df1 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -13,11 +13,31 @@
 	model = "TI AM335x BeagleBone";
 	compatible = "ti,am335x-bone", "ti,am33xx";
 
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&dcdc2_reg>;
+		};
+	};
+
 	memory {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
+	am33xx_pinmux: pinmux@44e10800 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0>;
+
+		user_leds_s0: user_leds_s0 {
+			pinctrl-single,pins = <
+				0x54 0x7	/* gpmc_a5.gpio1_21, OUTPUT | MODE7 */
+				0x58 0x17	/* gpmc_a6.gpio1_22, OUTPUT_PULLUP | MODE7 */
+				0x5c 0x7	/* gpmc_a7.gpio1_23, OUTPUT | MODE7 */
+				0x60 0x17	/* gpmc_a8.gpio1_24, OUTPUT_PULLUP | MODE7 */
+			>;
+		};
+	};
+
 	ocp {
 		uart1: serial@44e09000 {
 			status = "okay";
@@ -33,6 +53,36 @@
 
 		};
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led@2 {
+			label = "beaglebone:green:heartbeat";
+			gpios = <&gpio2 21 0>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led@3 {
+			label = "beaglebone:green:mmc0";
+			gpios = <&gpio2 22 0>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led@4 {
+			label = "beaglebone:green:usr2";
+			gpios = <&gpio2 23 0>;
+			default-state = "off";
+		};
+
+		led@5 {
+			label = "beaglebone:green:usr3";
+			gpios = <&gpio2 24 0>;
+			default-state = "off";
+		};
+	};
 };
 
 /include/ "tps65217.dtsi"
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 185d6325a45..9f65f17ebdf 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -13,11 +13,39 @@
 	model = "TI AM335x EVM";
 	compatible = "ti,am335x-evm", "ti,am33xx";
 
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
 	memory {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
+	am33xx_pinmux: pinmux@44e10800 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0>;
+
+		matrix_keypad_s0: matrix_keypad_s0 {
+			pinctrl-single,pins = <
+				0x54 0x7	/* gpmc_a5.gpio1_21, OUTPUT | MODE7 */
+				0x58 0x7	/* gpmc_a6.gpio1_22, OUTPUT | MODE7 */
+				0x64 0x27	/* gpmc_a9.gpio1_25, INPUT | MODE7 */
+				0x68 0x27	/* gpmc_a10.gpio1_26, INPUT | MODE7 */
+				0x6c 0x27	/* gpmc_a11.gpio1_27, INPUT | MODE7 */
+			>;
+		};
+
+		volume_keys_s0: volume_keys_s0 {
+			pinctrl-single,pins = <
+				0x150 0x27	/* spi0_sclk.gpio0_2, INPUT | MODE7 */
+				0x154 0x27	/* spi0_d0.gpio0_3, INPUT | MODE7 */
+			>;
+		};
+	};
+
 	ocp {
 		uart1: serial@44e09000 {
 			status = "okay";
@@ -31,6 +59,49 @@
 				reg = <0x2d>;
 			};
 		};
+
+		i2c2: i2c@4802a000 {
+			status = "okay";
+			clock-frequency = <100000>;
+
+			lis331dlh: lis331dlh@18 {
+				compatible = "st,lis331dlh", "st,lis3lv02d";
+				reg = <0x18>;
+				Vdd-supply = <&lis3_reg>;
+				Vdd_IO-supply = <&lis3_reg>;
+
+				st,click-single-x;
+				st,click-single-y;
+				st,click-single-z;
+				st,click-thresh-x = <10>;
+				st,click-thresh-y = <10>;
+				st,click-thresh-z = <10>;
+				st,irq1-click;
+				st,irq2-click;
+				st,wakeup-x-lo;
+				st,wakeup-x-hi;
+				st,wakeup-y-lo;
+				st,wakeup-y-hi;
+				st,wakeup-z-lo;
+				st,wakeup-z-hi;
+				st,min-limit-x = <120>;
+				st,min-limit-y = <120>;
+				st,min-limit-z = <140>;
+				st,max-limit-x = <550>;
+				st,max-limit-y = <550>;
+				st,max-limit-z = <750>;
+			};
+
+			tsl2550: tsl2550@39 {
+				compatible = "taos,tsl2550";
+				reg = <0x39>;
+			};
+
+			tmp275: tmp275@48 {
+				compatible = "ti,tmp275";
+				reg = <0x48>;
+			};
+		};
 	};
 
 	vbat: fixedregulator@0 {
@@ -40,6 +111,53 @@
 		regulator-max-microvolt = <5000000>;
 		regulator-boot-on;
 	};
+
+	lis3_reg: fixedregulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "lis3_reg";
+		regulator-boot-on;
+	};
+
+	matrix_keypad: matrix_keypad@0 {
+		compatible = "gpio-matrix-keypad";
+		debounce-delay-ms = <5>;
+		col-scan-delay-us = <2>;
+
+		row-gpios = <&gpio2 25 0	/* Bank1, pin25 */
+			     &gpio2 26 0	/* Bank1, pin26 */
+			     &gpio2 27 0>;	/* Bank1, pin27 */
+
+		col-gpios = <&gpio2 21 0	/* Bank1, pin21 */
+			     &gpio2 22 0>;	/* Bank1, pin22 */
+
+		linux,keymap = <0x0000008b	/* MENU */
+				0x0100009e	/* BACK */
+				0x02000069	/* LEFT */
+				0x0001006a	/* RIGHT */
+				0x0101001c	/* ENTER */
+				0x0201006c>;	/* DOWN */
+	};
+
+	gpio_keys: volume_keys@0 {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		switch@9 {
+			label = "volume-up";
+			linux,code = <115>;
+			gpios = <&gpio1 2 1>;
+			gpio-key,wakeup;
+		};
+
+		switch@10 {
+			label = "volume-down";
+			linux,code = <114>;
+			gpios = <&gpio1 3 1>;
+			gpio-key,wakeup;
+		};
+	};
 };
 
 /include/ "tps65910.dtsi"
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
new file mode 100644
index 00000000000..f5a6162a4ff
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -0,0 +1,250 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * AM335x Starter Kit
+ * http://www.ti.com/tool/tmdssk3358
+ */
+
+/dts-v1/;
+
+/include/ "am33xx.dtsi"
+
+/ {
+	model = "TI AM335x EVM-SK";
+	compatible = "ti,am335x-evmsk", "ti,am33xx";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	am33xx_pinmux: pinmux@44e10800 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0 &gpio_keys_s0>;
+
+		user_leds_s0: user_leds_s0 {
+			pinctrl-single,pins = <
+				0x10 0x7	/* gpmc_ad4.gpio1_4, OUTPUT | MODE7 */
+				0x14 0x7	/* gpmc_ad5.gpio1_5, OUTPUT | MODE7 */
+				0x18 0x7	/* gpmc_ad6.gpio1_6, OUTPUT | MODE7 */
+				0x1c 0x7	/* gpmc_ad7.gpio1_7, OUTPUT | MODE7 */
+			>;
+		};
+
+		gpio_keys_s0: gpio_keys_s0 {
+			pinctrl-single,pins = <
+				0x94 0x27	/* gpmc_oen_ren.gpio2_3, INPUT | MODE7 */
+				0x90 0x27	/* gpmc_advn_ale.gpio2_2, INPUT | MODE7 */
+				0x70 0x27	/* gpmc_wait0.gpio0_30, INPUT | MODE7 */
+				0x9c 0x27	/* gpmc_ben0_cle.gpio2_5, INPUT | MODE7 */
+			>;
+		};
+	};
+
+	ocp {
+		uart1: serial@44e09000 {
+			status = "okay";
+		};
+
+		i2c1: i2c@44e0b000 {
+			status = "okay";
+			clock-frequency = <400000>;
+
+			tps: tps@2d {
+				reg = <0x2d>;
+			};
+
+			lis331dlh: lis331dlh@18 {
+				compatible = "st,lis331dlh", "st,lis3lv02d";
+				reg = <0x18>;
+				Vdd-supply = <&lis3_reg>;
+				Vdd_IO-supply = <&lis3_reg>;
+
+				st,click-single-x;
+				st,click-single-y;
+				st,click-single-z;
+				st,click-thresh-x = <10>;
+				st,click-thresh-y = <10>;
+				st,click-thresh-z = <10>;
+				st,irq1-click;
+				st,irq2-click;
+				st,wakeup-x-lo;
+				st,wakeup-x-hi;
+				st,wakeup-y-lo;
+				st,wakeup-y-hi;
+				st,wakeup-z-lo;
+				st,wakeup-z-hi;
+				st,min-limit-x = <120>;
+				st,min-limit-y = <120>;
+				st,min-limit-z = <140>;
+				st,max-limit-x = <550>;
+				st,max-limit-y = <550>;
+				st,max-limit-z = <750>;
+			};
+		};
+	};
+
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	lis3_reg: fixedregulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "lis3_reg";
+		regulator-boot-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led@1 {
+			label = "evmsk:green:usr0";
+			gpios = <&gpio2 4 0>;
+			default-state = "off";
+		};
+
+		led@2 {
+			label = "evmsk:green:usr1";
+			gpios = <&gpio2 5 0>;
+			default-state = "off";
+		};
+
+		led@3 {
+			label = "evmsk:green:mmc0";
+			gpios = <&gpio2 6 0>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led@4 {
+			label = "evmsk:green:heartbeat";
+			gpios = <&gpio2 7 0>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	gpio_buttons: gpio_buttons@0 {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@1 {
+			label = "button0";
+			linux,code = <0x100>;
+			gpios = <&gpio3 3 0>;
+		};
+
+		switch@2 {
+			label = "button1";
+			linux,code = <0x101>;
+			gpios = <&gpio3 2 0>;
+		};
+
+		switch@3 {
+			label = "button2";
+			linux,code = <0x102>;
+			gpios = <&gpio1 30 0>;
+			gpio-key,wakeup;
+		};
+
+		switch@4 {
+			label = "button3";
+			linux,code = <0x103>;
+			gpios = <&gpio3 5 0>;
+		};
+	};
+};
+
+/include/ "tps65910.dtsi"
+
+&tps {
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1312500>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-always-on;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index bb31bff0199..20a3f29a6bf 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -12,6 +12,7 @@
 
 / {
 	compatible = "ti,am33xx";
+	interrupt-parent = <&intc>;
 
 	aliases {
 		serial0 = &uart1;
@@ -25,6 +26,21 @@
 	cpus {
 		cpu@0 {
 			compatible = "arm,cortex-a8";
+
+			/*
+			 * To consider voltage drop between PMIC and SoC,
+			 * tolerance value is reduced to 2% from 4% and
+			 * voltage value is increased as a precaution.
+			 */
+			operating-points = <
+				/* kHz    uV */
+				720000  1285000
+				600000  1225000
+				500000  1125000
+				275000  1125000
+			>;
+			voltage-tolerance = <2>; /* 2 percentage */
+			clock-latency = <300000>; /* From omap-cpufreq driver */
 		};
 	};
 
@@ -40,6 +56,15 @@
 		};
 	};
 
+	am33xx_pinmux: pinmux@44e10800 {
+		compatible = "pinctrl-single";
+		reg = <0x44e10800 0x0238>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x7f>;
+	};
+
 	/*
 	 * XXX: Use a flat representation of the AM33XX interconnect.
 	 * The real AM33XX interconnect network is quite complex.Since
@@ -70,7 +95,6 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			reg = <0x44e07000 0x1000>;
-			interrupt-parent = <&intc>;
 			interrupts = <96>;
 		};
 
@@ -82,7 +106,6 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			reg = <0x4804c000 0x1000>;
-			interrupt-parent = <&intc>;
 			interrupts = <98>;
 		};
 
@@ -94,7 +117,6 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			reg = <0x481ac000 0x1000>;
-			interrupt-parent = <&intc>;
 			interrupts = <32>;
 		};
 
@@ -106,7 +128,6 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			reg = <0x481ae000 0x1000>;
-			interrupt-parent = <&intc>;
 			interrupts = <62>;
 		};
 
@@ -115,7 +136,6 @@
 			ti,hwmods = "uart1";
 			clock-frequency = <48000000>;
 			reg = <0x44e09000 0x2000>;
-			interrupt-parent = <&intc>;
 			interrupts = <72>;
 			status = "disabled";
 		};
@@ -125,7 +145,6 @@
 			ti,hwmods = "uart2";
 			clock-frequency = <48000000>;
 			reg = <0x48022000 0x2000>;
-			interrupt-parent = <&intc>;
 			interrupts = <73>;
 			status = "disabled";
 		};
@@ -135,7 +154,6 @@
 			ti,hwmods = "uart3";
 			clock-frequency = <48000000>;
 			reg = <0x48024000 0x2000>;
-			interrupt-parent = <&intc>;
 			interrupts = <74>;
 			status = "disabled";
 		};
@@ -145,7 +163,6 @@
 			ti,hwmods = "uart4";
 			clock-frequency = <48000000>;
 			reg = <0x481a6000 0x2000>;
-			interrupt-parent = <&intc>;
 			interrupts = <44>;
 			status = "disabled";
 		};
@@ -155,7 +172,6 @@
 			ti,hwmods = "uart5";
 			clock-frequency = <48000000>;
 			reg = <0x481a8000 0x2000>;
-			interrupt-parent = <&intc>;
 			interrupts = <45>;
 			status = "disabled";
 		};
@@ -165,7 +181,6 @@
 			ti,hwmods = "uart6";
 			clock-frequency = <48000000>;
 			reg = <0x481aa000 0x2000>;
-			interrupt-parent = <&intc>;
 			interrupts = <46>;
 			status = "disabled";
 		};
@@ -176,7 +191,6 @@
 			#size-cells = <0>;
 			ti,hwmods = "i2c1";
 			reg = <0x44e0b000 0x1000>;
-			interrupt-parent = <&intc>;
 			interrupts = <70>;
 			status = "disabled";
 		};
@@ -187,7 +201,6 @@
 			#size-cells = <0>;
 			ti,hwmods = "i2c2";
 			reg = <0x4802a000 0x1000>;
-			interrupt-parent = <&intc>;
 			interrupts = <71>;
 			status = "disabled";
 		};
@@ -198,7 +211,6 @@
 			#size-cells = <0>;
 			ti,hwmods = "i2c3";
 			reg = <0x4819c000 0x1000>;
-			interrupt-parent = <&intc>;
 			interrupts = <30>;
 			status = "disabled";
 		};
@@ -207,8 +219,124 @@
 			compatible = "ti,omap3-wdt";
 			ti,hwmods = "wd_timer2";
 			reg = <0x44e35000 0x1000>;
-			interrupt-parent = <&intc>;
 			interrupts = <91>;
 		};
+
+		dcan0: d_can@481cc000 {
+			compatible = "bosch,d_can";
+			ti,hwmods = "d_can0";
+			reg = <0x481cc000 0x2000>;
+			interrupts = <52>;
+			status = "disabled";
+		};
+
+		dcan1: d_can@481d0000 {
+			compatible = "bosch,d_can";
+			ti,hwmods = "d_can1";
+			reg = <0x481d0000 0x2000>;
+			interrupts = <55>;
+			status = "disabled";
+		};
+
+		timer1: timer@44e31000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x44e31000 0x400>;
+			interrupts = <67>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
+
+		timer2: timer@48040000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48040000 0x400>;
+			interrupts = <68>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@48042000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48042000 0x400>;
+			interrupts = <69>;
+			ti,hwmods = "timer3";
+		};
+
+		timer4: timer@48044000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48044000 0x400>;
+			interrupts = <92>;
+			ti,hwmods = "timer4";
+			ti,timer-pwm;
+		};
+
+		timer5: timer@48046000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48046000 0x400>;
+			interrupts = <93>;
+			ti,hwmods = "timer5";
+			ti,timer-pwm;
+		};
+
+		timer6: timer@48048000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48048000 0x400>;
+			interrupts = <94>;
+			ti,hwmods = "timer6";
+			ti,timer-pwm;
+		};
+
+		timer7: timer@4804a000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4804a000 0x400>;
+			interrupts = <95>;
+			ti,hwmods = "timer7";
+			ti,timer-pwm;
+		};
+
+		rtc@44e3e000 {
+			compatible = "ti,da830-rtc";
+			reg = <0x44e3e000 0x1000>;
+			interrupts = <75
+				      76>;
+			ti,hwmods = "rtc";
+		};
+
+		spi0: spi@48030000 {
+			compatible = "ti,omap4-mcspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x48030000 0x400>;
+			interrupt = <65>;
+			ti,spi-num-cs = <2>;
+			ti,hwmods = "spi0";
+			status = "disabled";
+		};
+
+		spi1: spi@481a0000 {
+			compatible = "ti,omap4-mcspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x481a0000 0x400>;
+			interrupt = <125>;
+			ti,spi-num-cs = <2>;
+			ti,hwmods = "spi1";
+			status = "disabled";
+		};
+
+		usb@47400000 {
+			compatible = "ti,musb-am33xx";
+			reg = <0x47400000 0x1000	/* usbss */
+			       0x47401000 0x800		/* musb instance 0 */
+			       0x47401800 0x800>;	/* musb instance 1 */
+			interrupts = <17		/* usbss */
+				      18		/* musb instance 0 */
+				      19>;		/* musb instance 1 */
+			multipoint = <1>;
+			num-eps = <16>;
+			ram-bits = <12>;
+			port0-mode = <3>;
+			port1-mode = <3>;
+			power = <250>;
+			ti,hwmods = "usb_otg_hs";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index d410581a5a8..bfb5bb6528b 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -246,6 +246,12 @@
 					trigger-external;
 				};
 			};
+
+			watchdog@fffffd40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffd40 0x10>;
+				status = "disabled";
+			};
 		};
 
 		nand0: nand@40000000 {
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 3e6e5c1abbf..ff5461278c0 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -195,6 +195,12 @@
 				#size-cells = <0>;
 				status = "disabled";
 			};
+
+			watchdog@fffffd40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffd40 0x10>;
+				status = "disabled";
+			};
 		};
 
 		nand0: nand@40000000 {
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 3add030d61f..a98c00a234e 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -262,6 +262,12 @@
 					trigger-value = <0x6>;
 				};
 			};
+
+			watchdog@fffffd40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffd40 0x10>;
+				status = "disabled";
+			};
 		};
 
 		nand0: nand@40000000 {
diff --git a/arch/arm/boot/dts/ccu9540.dts b/arch/arm/boot/dts/ccu9540.dts
new file mode 100644
index 00000000000..04305463f00
--- /dev/null
+++ b/arch/arm/boot/dts/ccu9540.dts
@@ -0,0 +1,72 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "dbx5x0.dtsi"
+
+/ {
+	model = "ST-Ericsson CCU9540 platform with Device Tree";
+	compatible = "st-ericsson,ccu9540", "st-ericsson,u9540";
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	soc-u9500 {
+		uart@80120000 {
+			status = "okay";
+		};
+
+		uart@80121000 {
+			status = "okay";
+		};
+
+		uart@80007000 {
+			status = "okay";
+		};
+
+		// External Micro SD slot
+		sdi0_per1@80126000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <4>;
+			mmc-cap-sd-highspeed;
+			mmc-cap-mmc-highspeed;
+			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+
+			cd-gpios  = <&gpio7 6 0x4>; // 230
+			cd-inverted;
+
+			status = "okay";
+		};
+
+
+		// WLAN SDIO channel
+		sdi1_per2@80118000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <4>;
+
+			status = "okay";
+		};
+
+		// On-board eMMC
+		sdi4_per2@80114000 {
+			arm,primecell-periphid = <0x10480180>;
+		        max-frequency = <100000000>;
+			bus-width = <8>;
+			mmc-cap-mmc-highspeed;
+			vmmc-supply = <&ab8500_ldo_aux2_reg>;
+
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi
new file mode 100644
index 00000000000..fddd1741743
--- /dev/null
+++ b/arch/arm/boot/dts/cros5250-common.dtsi
@@ -0,0 +1,184 @@
+/*
+ * Common device tree include for all Exynos 5250 boards based off of Daisy.
+ *
+ * Copyright (c) 2012 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/ {
+	aliases {
+	};
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	chosen {
+	};
+
+	i2c@12C60000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <378000>;
+		gpios = <&gpb3 0 2 3 0>,
+			<&gpb3 1 2 3 0>;
+	};
+
+	i2c@12C70000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <378000>;
+		gpios = <&gpb3 2 2 3 0>,
+			<&gpb3 3 2 3 0>;
+	};
+
+	i2c@12C80000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <66000>;
+
+		/*
+		 * Disabled pullups since external part has its own pullups and
+		 * double-pulling gets us out of spec in some cases.
+		 */
+		gpios = <&gpa0 6 3 0 0>,
+			<&gpa0 7 3 0 0>;
+
+		hdmiddc@50 {
+			compatible = "samsung,exynos5-hdmiddc";
+			reg = <0x50>;
+		};
+	};
+
+	i2c@12C90000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <66000>;
+		gpios = <&gpa1 2 3 3 0>,
+			<&gpa1 3 3 3 0>;
+	};
+
+	i2c@12CA0000 {
+		status = "disabled";
+	};
+
+	i2c@12CB0000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <66000>;
+		gpios = <&gpa2 2 3 3 0>,
+			<&gpa2 3 3 3 0>;
+	};
+
+	i2c@12CC0000 {
+		status = "disabled";
+	};
+
+	i2c@12CD0000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <66000>;
+		gpios = <&gpb2 2 3 3 0>,
+			<&gpb2 3 3 3 0>;
+	};
+
+	i2c@12CE0000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <378000>;
+
+		hdmiphy@38 {
+			compatible = "samsung,exynos5-hdmiphy";
+			reg = <0x38>;
+		};
+	};
+
+	dwmmc0@12200000 {
+		num-slots = <1>;
+		supports-highspeed;
+		broken-cd;
+		fifo-depth = <0x80>;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <2 3 3>;
+		samsung,dw-mshc-ddr-timing = <1 2 3>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <8>;
+			gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>,
+				<&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>,
+				<&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>,
+				<&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>,
+				<&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>;
+		};
+	};
+
+	dwmmc1@12210000 {
+		status = "disabled";
+	};
+
+	dwmmc2@12220000 {
+		num-slots = <1>;
+		supports-highspeed;
+		fifo-depth = <0x80>;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <2 3 3>;
+		samsung,dw-mshc-ddr-timing = <1 2 3>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <4>;
+			samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>;
+			wp-gpios = <&gpc2 1 0 0 3>;
+			gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>,
+				<&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>,
+				<&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>;
+		};
+	};
+
+	dwmmc3@12230000 {
+		num-slots = <1>;
+		supports-highspeed;
+		broken-cd;
+		fifo-depth = <0x80>;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <2 3 3>;
+		samsung,dw-mshc-ddr-timing = <1 2 3>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <4>;
+			/* See board-specific dts files for GPIOs */
+		};
+	};
+
+	spi_0: spi@12d20000 {
+		status = "disabled";
+	};
+
+	spi_1: spi@12d30000 {
+		gpios = <&gpa2 4 2 3 0>,
+			<&gpa2 6 2 3 0>,
+			<&gpa2 7 2 3 0>;
+		samsung,spi-src-clk = <0>;
+		num-cs = <1>;
+	};
+
+	spi_2: spi@12d40000 {
+		status = "disabled";
+	};
+
+	hdmi {
+		hpd-gpio = <&gpx3 7 0xf 1 3>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpx1 3 0 0x10000 0>;
+			linux,code = <116>; /* KEY_POWER */
+			gpio-key,wakeup;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/da850-enbw-cmc.dts b/arch/arm/boot/dts/da850-enbw-cmc.dts
new file mode 100644
index 00000000000..422fdb3fcfc
--- /dev/null
+++ b/arch/arm/boot/dts/da850-enbw-cmc.dts
@@ -0,0 +1,30 @@
+/*
+ * Device Tree for AM1808 EnBW CMC board
+ *
+ * Copyright 2012 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+/dts-v1/;
+/include/ "da850.dtsi"
+
+/ {
+	compatible = "enbw,cmc", "ti,da850";
+	model = "EnBW CMC";
+
+	soc {
+		serial0: serial@1c42000 {
+			status = "okay";
+		};
+		serial1: serial@1d0c000 {
+			status = "okay";
+		};
+		serial2: serial@1d0d000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
new file mode 100644
index 00000000000..37dc5a3243b
--- /dev/null
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -0,0 +1,28 @@
+/*
+ * Device Tree for DA850 EVM board
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation, version 2.
+ */
+/dts-v1/;
+/include/ "da850.dtsi"
+
+/ {
+	compatible = "ti,da850-evm", "ti,da850";
+	model = "DA850/AM1808/OMAP-L138 EVM";
+
+	soc {
+		serial0: serial@1c42000 {
+			status = "okay";
+		};
+		serial1: serial@1d0c000 {
+			status = "okay";
+		};
+		serial2: serial@1d0d000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
new file mode 100644
index 00000000000..640ab75c20d
--- /dev/null
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -0,0 +1,60 @@
+/*
+ * Copyright 2012 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+/include/ "skeleton.dtsi"
+
+/ {
+	arm {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		intc: interrupt-controller {
+			compatible = "ti,cp-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			ti,intc-size = <100>;
+			reg = <0xfffee000 0x2000>;
+		};
+	};
+	soc {
+		compatible = "simple-bus";
+		model = "da850";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x01c00000 0x400000>;
+
+		serial0: serial@1c42000 {
+			compatible = "ns16550a";
+			reg = <0x42000 0x100>;
+			clock-frequency = <150000000>;
+			reg-shift = <2>;
+			interrupts = <25>;
+			interrupt-parent = <&intc>;
+			status = "disabled";
+		};
+		serial1: serial@1d0c000 {
+			compatible = "ns16550a";
+			reg = <0x10c000 0x100>;
+			clock-frequency = <150000000>;
+			reg-shift = <2>;
+			interrupts = <53>;
+			interrupt-parent = <&intc>;
+			status = "disabled";
+		};
+		serial2: serial@1d0d000 {
+			compatible = "ns16550a";
+			reg = <0x10d000 0x100>;
+			clock-frequency = <150000000>;
+			reg-shift = <2>;
+			interrupts = <61>;
+			interrupt-parent = <&intc>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index 4b0e0ca08f4..9f553630242 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -209,123 +209,103 @@
 				// DB8500_REGULATOR_VAPE
 				db8500_vape_reg: db8500_vape {
 					regulator-compatible = "db8500_vape";
-					regulator-name = "db8500-vape";
 					regulator-always-on;
 				};
 
 				// DB8500_REGULATOR_VARM
 				db8500_varm_reg: db8500_varm {
 					regulator-compatible = "db8500_varm";
-					regulator-name = "db8500-varm";
 				};
 
 				// DB8500_REGULATOR_VMODEM
 				db8500_vmodem_reg: db8500_vmodem {
 					regulator-compatible = "db8500_vmodem";
-					regulator-name = "db8500-vmodem";
 				};
 
 				// DB8500_REGULATOR_VPLL
 				db8500_vpll_reg: db8500_vpll {
 					regulator-compatible = "db8500_vpll";
-					regulator-name = "db8500-vpll";
 				};
 
 				// DB8500_REGULATOR_VSMPS1
 				db8500_vsmps1_reg: db8500_vsmps1 {
 					regulator-compatible = "db8500_vsmps1";
-					regulator-name = "db8500-vsmps1";
 				};
 
 				// DB8500_REGULATOR_VSMPS2
 				db8500_vsmps2_reg: db8500_vsmps2 {
 					regulator-compatible = "db8500_vsmps2";
-					regulator-name = "db8500-vsmps2";
 				};
 
 				// DB8500_REGULATOR_VSMPS3
 				db8500_vsmps3_reg: db8500_vsmps3 {
 					regulator-compatible = "db8500_vsmps3";
-					regulator-name = "db8500-vsmps3";
 				};
 
 				// DB8500_REGULATOR_VRF1
 				db8500_vrf1_reg: db8500_vrf1 {
 					regulator-compatible = "db8500_vrf1";
-					regulator-name = "db8500-vrf1";
 				};
 
 				// DB8500_REGULATOR_SWITCH_SVAMMDSP
 				db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
 					regulator-compatible = "db8500_sva_mmdsp";
-					regulator-name = "db8500-sva-mmdsp";
 				};
 
 				// DB8500_REGULATOR_SWITCH_SVAMMDSPRET
 				db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
 					regulator-compatible = "db8500_sva_mmdsp_ret";
-					regulator-name = "db8500-sva-mmdsp-ret";
 				};
 
 				// DB8500_REGULATOR_SWITCH_SVAPIPE
 				db8500_sva_pipe_reg: db8500_sva_pipe {
 					regulator-compatible = "db8500_sva_pipe";
-					regulator-name = "db8500_sva_pipe";
 				};
 
 				// DB8500_REGULATOR_SWITCH_SIAMMDSP
 				db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
 					regulator-compatible = "db8500_sia_mmdsp";
-					regulator-name = "db8500_sia_mmdsp";
 				};
 
 				// DB8500_REGULATOR_SWITCH_SIAMMDSPRET
 				db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
-					regulator-name = "db8500-sia-mmdsp-ret";
 				};
 
 				// DB8500_REGULATOR_SWITCH_SIAPIPE
 				db8500_sia_pipe_reg: db8500_sia_pipe {
 					regulator-compatible = "db8500_sia_pipe";
-					regulator-name = "db8500-sia-pipe";
 				};
 
 				// DB8500_REGULATOR_SWITCH_SGA
 				db8500_sga_reg: db8500_sga {
 					regulator-compatible = "db8500_sga";
-					regulator-name = "db8500-sga";
 					vin-supply = <&db8500_vape_reg>;
 				};
 
 				// DB8500_REGULATOR_SWITCH_B2R2_MCDE
 				db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
 					regulator-compatible = "db8500_b2r2_mcde";
-					regulator-name = "db8500-b2r2-mcde";
 					vin-supply = <&db8500_vape_reg>;
 				};
 
 				// DB8500_REGULATOR_SWITCH_ESRAM12
 				db8500_esram12_reg: db8500_esram12 {
 					regulator-compatible = "db8500_esram12";
-					regulator-name = "db8500-esram12";
 				};
 
 				// DB8500_REGULATOR_SWITCH_ESRAM12RET
 				db8500_esram12_ret_reg: db8500_esram12_ret {
 					regulator-compatible = "db8500_esram12_ret";
-					regulator-name = "db8500-esram12-ret";
 				};
 
 				// DB8500_REGULATOR_SWITCH_ESRAM34
 				db8500_esram34_reg: db8500_esram34 {
 					regulator-compatible = "db8500_esram34";
-					regulator-name = "db8500-esram34";
 				};
 
 				// DB8500_REGULATOR_SWITCH_ESRAM34RET
 				db8500_esram34_ret_reg: db8500_esram34_ret {
 					regulator-compatible = "db8500_esram34_ret";
-					regulator-name = "db8500-esram34-ret";
 				};
 			};
 
@@ -404,7 +384,6 @@
 					// supplies to the display/camera
 					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
 						regulator-compatible = "ab8500_ldo_aux1";
-						regulator-name = "V-DISPLAY";
 						regulator-min-microvolt = <2500000>;
 						regulator-max-microvolt = <2900000>;
 						regulator-boot-on;
@@ -415,7 +394,6 @@
 					// supplies to the on-board eMMC
 					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
 						regulator-compatible = "ab8500_ldo_aux2";
-						regulator-name = "V-eMMC1";
 						regulator-min-microvolt = <1100000>;
 						regulator-max-microvolt = <3300000>;
 					};
@@ -423,7 +401,6 @@
 					// supply for VAUX3; SDcard slots
 					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
 						regulator-compatible = "ab8500_ldo_aux3";
-						regulator-name = "V-MMC-SD";
 						regulator-min-microvolt = <1100000>;
 						regulator-max-microvolt = <3300000>;
 					};
@@ -431,49 +408,41 @@
 					// supply for v-intcore12; VINTCORE12 LDO
 					ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
 						regulator-compatible = "ab8500_ldo_initcore";
-						regulator-name = "V-INTCORE";
 					};
 
 					// supply for tvout; gpadc; TVOUT LDO
 					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
 						regulator-compatible = "ab8500_ldo_tvout";
-						regulator-name = "V-TVOUT";
 					};
 
 					// supply for ab8500-usb; USB LDO
 					ab8500_ldo_usb_reg: ab8500_ldo_usb {
 						regulator-compatible = "ab8500_ldo_usb";
-						regulator-name = "dummy";
 					};
 
 					// supply for ab8500-vaudio; VAUDIO LDO
 					ab8500_ldo_audio_reg: ab8500_ldo_audio {
 						regulator-compatible = "ab8500_ldo_audio";
-						regulator-name = "V-AUD";
 					};
 
 					// supply for v-anamic1 VAMic1-LDO
 					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
 						regulator-compatible = "ab8500_ldo_anamic1";
-						regulator-name = "V-AMIC1";
 					};
 
 					// supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
 					ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
 						regulator-compatible = "ab8500_ldo_amamic2";
-						regulator-name = "V-AMIC2";
 					};
 
 					// supply for v-dmic; VDMIC LDO
 					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
 						regulator-compatible = "ab8500_ldo_dmic";
-						regulator-name = "V-DMIC";
 					};
 
 					// supply for U8500 CSI/DSI; VANA LDO
 					ab8500_ldo_ana_reg: ab8500_ldo_ana {
 						regulator-compatible = "ab8500_ldo_ana";
-						regulator-name = "V-CSI/DSI";
 					};
 				};
 			};
@@ -577,42 +546,42 @@
 			status = "disabled";
 		};
 
-		sdi@80126000 {
+		sdi0_per1@80126000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80126000 0x1000>;
 			interrupts = <0 60 0x4>;
 			status = "disabled";
 		};
 
-		sdi@80118000 {
+		sdi1_per2@80118000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80118000 0x1000>;
 			interrupts = <0 50 0x4>;
 			status = "disabled";
 		};
 
-		sdi@80005000 {
+		sdi2_per3@80005000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80005000 0x1000>;
 			interrupts = <0 41 0x4>;
 			status = "disabled";
 		};
 
-		sdi@80119000 {
+		sdi3_per2@80119000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80119000 0x1000>;
 			interrupts = <0 59 0x4>;
 			status = "disabled";
 		};
 
-		sdi@80114000 {
+		sdi4_per2@80114000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80114000 0x1000>;
 			interrupts = <0 99 0x4>;
 			status = "disabled";
 		};
 
-		sdi@80008000 {
+		sdi5_per3@80008000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80008000 0x1000>;
 			interrupts = <0 100 0x4>;
@@ -660,5 +629,19 @@
 			ranges = <0 0x50000000 0x4000000>;
 			status = "disabled";
 		};
+
+		vmmci: regulator-gpio {
+			compatible = "regulator-gpio";
+
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2600000>;
+			regulator-name = "mmci-reg";
+			regulator-type = "voltage";
+
+			states = <1800000 0x1
+				  2900000 0x0>;
+
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
index 0adbd5a3809..fed7d3f9f43 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -40,3 +40,13 @@
 		reg = <0>;
 	};
 };
+
+&pinctrl {
+	pinctrl-0 = <&pmx_gpio_18>;
+	pinctrl-names = "default";
+
+	pmx_gpio_18: pmx-gpio-18 {
+		marvell,pins = "mpp18";
+		marvell,function = "gpio";
+	};
+};
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 5a00022383e..61f391412a5 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -4,6 +4,12 @@
 	compatible = "marvell,dove";
 	model = "Marvell Armada 88AP510 SoC";
 
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
 	soc@f1000000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -72,7 +78,8 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			reg = <0xd0400 0x20>;
-			ngpio = <32>;
+			ngpios = <32>;
+			interrupt-controller;
 			interrupts = <12>, <13>, <14>, <60>;
 		};
 
@@ -81,7 +88,8 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			reg = <0xd0420 0x20>;
-			ngpio = <32>;
+			ngpios = <32>;
+			interrupt-controller;
 			interrupts = <61>;
 		};
 
@@ -90,7 +98,12 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			reg = <0xe8400 0x0c>;
-			ngpio = <8>;
+			ngpios = <8>;
+		};
+
+		pinctrl: pinctrl@d0200 {
+			compatible = "marvell,dove-pinctrl";
+			reg = <0xd0200 0x10>;
 		};
 
 		spi0: spi@10600 {
diff --git a/arch/arm/boot/dts/evk-pro3.dts b/arch/arm/boot/dts/evk-pro3.dts
index b7354e6506d..96e50f56943 100644
--- a/arch/arm/boot/dts/evk-pro3.dts
+++ b/arch/arm/boot/dts/evk-pro3.dts
@@ -22,10 +22,22 @@
 				status = "okay";
 			};
 
+			usart0: serial@fffb0000 {
+				status = "okay";
+			};
+
+			usart2: serial@fffb8000 {
+				status = "okay";
+			};
+
 			usb1: gadget@fffa4000 {
 				atmel,vbus-gpio = <&pioC 5 0>;
 				status = "okay";
 			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
 		};
 
 		usb0: ohci@00500000 {
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index a26c3dd5826..3428f1a94dc 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -28,6 +28,44 @@
 		spi0 = &spi_0;
 		spi1 = &spi_1;
 		spi2 = &spi_2;
+		i2c0 = &i2c_0;
+		i2c1 = &i2c_1;
+		i2c2 = &i2c_2;
+		i2c3 = &i2c_3;
+		i2c4 = &i2c_4;
+		i2c5 = &i2c_5;
+		i2c6 = &i2c_6;
+		i2c7 = &i2c_7;
+	};
+
+	pd_mfc: mfc-power-domain@10023C40 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10023C40 0x20>;
+	};
+
+	pd_g3d: g3d-power-domain@10023C60 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10023C60 0x20>;
+	};
+
+	pd_lcd0: lcd0-power-domain@10023C80 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10023C80 0x20>;
+	};
+
+	pd_tv: tv-power-domain@10023C20 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10023C20 0x20>;
+	};
+
+	pd_cam: cam-power-domain@10023C00 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10023C00 0x20>;
+	};
+
+	pd_gps: gps-power-domain@10023CE0 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10023CE0 0x20>;
 	};
 
 	gic:interrupt-controller@10490000 {
@@ -121,7 +159,7 @@
 		status = "disabled";
 	};
 
-	i2c@13860000 {
+	i2c_0: i2c@13860000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-i2c";
@@ -130,7 +168,7 @@
 		status = "disabled";
 	};
 
-	i2c@13870000 {
+	i2c_1: i2c@13870000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-i2c";
@@ -139,7 +177,7 @@
 		status = "disabled";
 	};
 
-	i2c@13880000 {
+	i2c_2: i2c@13880000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-i2c";
@@ -148,7 +186,7 @@
 		status = "disabled";
 	};
 
-	i2c@13890000 {
+	i2c_3: i2c@13890000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-i2c";
@@ -157,7 +195,7 @@
 		status = "disabled";
 	};
 
-	i2c@138A0000 {
+	i2c_4: i2c@138A0000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-i2c";
@@ -166,7 +204,7 @@
 		status = "disabled";
 	};
 
-	i2c@138B0000 {
+	i2c_5: i2c@138B0000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-i2c";
@@ -175,7 +213,7 @@
 		status = "disabled";
 	};
 
-	i2c@138C0000 {
+	i2c_6: i2c@138C0000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-i2c";
@@ -184,7 +222,7 @@
 		status = "disabled";
 	};
 
-	i2c@138D0000 {
+	i2c_7: i2c@138D0000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-i2c";
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index 3e68f52e845..f2710018e84 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -22,38 +22,54 @@
 	compatible = "insignal,origen", "samsung,exynos4210";
 
 	memory {
-		reg = <0x40000000 0x40000000>;
+		reg = <0x40000000 0x10000000
+		       0x50000000 0x10000000
+		       0x60000000 0x10000000
+		       0x70000000 0x10000000>;
 	};
 
 	chosen {
 		bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
 	};
 
+	mmc_reg: voltage-regulator {
+	        compatible = "regulator-fixed";
+		regulator-name = "VMEM_VDD_2.8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpx1 1 0>;
+		enable-active-high;
+	};
+
 	sdhci@12530000 {
-		samsung,sdhci-bus-width = <4>;
-		linux,mmc_cap_4_bit_data;
-		samsung,sdhci-cd-internal;
-		gpio-cd = <&gpk2 2 2 3 3>;
-		gpios = <&gpk2 0 2 0 3>,
-			<&gpk2 1 2 0 3>,
-			<&gpk2 3 2 3 3>,
-			<&gpk2 4 2 3 3>,
-			<&gpk2 5 2 3 3>,
-			<&gpk2 6 2 3 3>;
+		bus-width = <4>;
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
+		pinctrl-names = "default";
+		vmmc-supply = <&mmc_reg>;
 		status = "okay";
 	};
 
 	sdhci@12510000 {
-		samsung,sdhci-bus-width = <4>;
-		linux,mmc_cap_4_bit_data;
-		samsung,sdhci-cd-internal;
-		gpio-cd = <&gpk0 2 2 3 3>;
-		gpios = <&gpk0 0 2 0 3>,
-			<&gpk0 1 2 0 3>,
-			<&gpk0 3 2 3 3>,
-			<&gpk0 4 2 3 3>,
-			<&gpk0 5 2 3 3>,
-			<&gpk0 6 2 3 3>;
+		bus-width = <4>;
+		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>;
+		pinctrl-names = "default";
+		vmmc-supply = <&mmc_reg>;
+		status = "okay";
+	};
+
+	serial@13800000 {
+		status = "okay";
+	};
+
+	serial@13810000 {
+		status = "okay";
+	};
+
+	serial@13820000 {
+		status = "okay";
+	};
+
+	serial@13830000 {
 		status = "okay";
 	};
 
@@ -64,35 +80,35 @@
 
 		up {
 			label = "Up";
-			gpios = <&gpx2 0 0 0x10000 2>;
+			gpios = <&gpx2 0 1>;
 			linux,code = <103>;
 			gpio-key,wakeup;
 		};
 
 		down {
 			label = "Down";
-			gpios = <&gpx2 1 0 0x10000 2>;
+			gpios = <&gpx2 1 1>;
 			linux,code = <108>;
 			gpio-key,wakeup;
 		};
 
 		back {
 			label = "Back";
-			gpios = <&gpx1 7 0 0x10000 2>;
+			gpios = <&gpx1 7 1>;
 			linux,code = <158>;
 			gpio-key,wakeup;
 		};
 
 		home {
 			label = "Home";
-			gpios = <&gpx1 6 0 0x10000 2>;
+			gpios = <&gpx1 6 1>;
 			linux,code = <102>;
 			gpio-key,wakeup;
 		};
 
 		menu {
 			label = "Menu";
-			gpios = <&gpx1 5 0 0x10000 2>;
+			gpios = <&gpx1 5 1>;
 			linux,code = <139>;
 			gpio-key,wakeup;
 		};
@@ -101,7 +117,7 @@
 	leds {
 		compatible = "gpio-leds";
 		status {
-			gpios = <&gpx1 3 0 0x10000 2>;
+			gpios = <&gpx1 3 1>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
index b12cf272ad0..55a2efb763d 100644
--- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
@@ -16,6 +16,134 @@
 
 / {
 	pinctrl@11400000 {
+		gpa0: gpa0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpa1: gpa1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb: gpb {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc0: gpc0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc1: gpc1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpd0: gpd0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpd1: gpd1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpe0: gpe0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpe1: gpe1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpe2: gpe2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpe3: gpe3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpe4: gpe4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf0: gpf0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf1: gpf1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf2: gpf2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf3: gpf3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
 		uart0_data: uart0-data {
 			samsung,pins = "gpa0-0", "gpa0-1";
 			samsung,pin-function = <0x2>;
@@ -205,200 +333,345 @@
 	};
 
 	pinctrl@11000000 {
+		gpj0: gpj0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpj1: gpj1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpk0: gpk0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpk1: gpk1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpk2: gpk2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpk3: gpk3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpl0: gpl0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpl1: gpl1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpl2: gpl2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpy0: gpy0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy1: gpy1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy2: gpy2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy3: gpy3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy4: gpy4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy5: gpy5 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy6: gpy6 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpx0: gpx0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
+				     <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
+			#interrupt-cells = <2>;
+		};
+
+		gpx1: gpx1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
+				     <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
+			#interrupt-cells = <2>;
+		};
+
+		gpx2: gpx2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpx3: gpx3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
 		sd0_clk: sd0-clk {
 			samsung,pins = "gpk0-0";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd0_cmd: sd0-cmd {
 			samsung,pins = "gpk0-1";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd0_cd: sd0-cd {
 			samsung,pins = "gpk0-2";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd0_bus1: sd0-bus-width1 {
 			samsung,pins = "gpk0-3";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd0_bus4: sd0-bus-width4 {
 			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd0_bus8: sd0-bus-width8 {
 			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd4_clk: sd4-clk {
 			samsung,pins = "gpk0-0";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd4_cmd: sd4-cmd {
 			samsung,pins = "gpk0-1";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd4_cd: sd4-cd {
 			samsung,pins = "gpk0-2";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd4_bus1: sd4-bus-width1 {
 			samsung,pins = "gpk0-3";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd4_bus4: sd4-bus-width4 {
 			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd4_bus8: sd4-bus-width8 {
 			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <4>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd1_clk: sd1-clk {
 			samsung,pins = "gpk1-0";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd1_cmd: sd1-cmd {
 			samsung,pins = "gpk1-1";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd1_cd: sd1-cd {
 			samsung,pins = "gpk1-2";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd1_bus1: sd1-bus-width1 {
 			samsung,pins = "gpk1-3";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd1_bus4: sd1-bus-width4 {
 			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd2_clk: sd2-clk {
 			samsung,pins = "gpk2-0";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd2_cmd: sd2-cmd {
 			samsung,pins = "gpk2-1";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd2_cd: sd2-cd {
 			samsung,pins = "gpk2-2";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd2_bus1: sd2-bus-width1 {
 			samsung,pins = "gpk2-3";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd2_bus4: sd2-bus-width4 {
 			samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd2_bus8: sd2-bus-width8 {
 			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd3_clk: sd3-clk {
 			samsung,pins = "gpk3-0";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd3_cmd: sd3-cmd {
 			samsung,pins = "gpk3-1";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd3_cd: sd3-cd {
 			samsung,pins = "gpk3-2";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd3_bus1: sd3-bus-width1 {
 			samsung,pins = "gpk3-3";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd3_bus4: sd3-bus-width4 {
 			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		eint0: ext-int0 {
@@ -438,6 +711,11 @@
 	};
 
 	pinctrl@03860000 {
+		gpz: gpz {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
 		i2s0_bus: i2s0-bus {
 			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 					"gpz-4", "gpz-5", "gpz-6";
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index 63610c3ba3a..9b23a8255e3 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -43,6 +43,22 @@
 		status = "okay";
 	};
 
+	serial@13800000 {
+		status = "okay";
+	};
+
+	serial@13810000 {
+		status = "okay";
+	};
+
+	serial@13820000 {
+		status = "okay";
+	};
+
+	serial@13830000 {
+		status = "okay";
+	};
+
 	keypad@100A0000 {
 		samsung,keypad-num-rows = <2>;
 		samsung,keypad-num-columns = <8>;
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index a21511c1407..c346b64dff5 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -35,24 +35,15 @@
 		regulator-name = "VMEM_VDD_2.8V";
 		regulator-min-microvolt = <2800000>;
 		regulator-max-microvolt = <2800000>;
-		gpio = <&gpk0 2 1 0 0>;
+		gpio = <&gpk0 2 0>;
 		enable-active-high;
 	};
 
 	sdhci_emmc: sdhci@12510000 {
 		bus-width = <8>;
 		non-removable;
-		broken-voltage;
-		gpios = <&gpk0 0 2 0 3>,
-			<&gpk0 1 2 0 3>,
-			<&gpk0 3 2 2 3>,
-			<&gpk0 4 2 2 3>,
-			<&gpk0 5 2 2 3>,
-			<&gpk0 6 2 2 3>,
-			<&gpk1 3 3 3 3>,
-			<&gpk1 4 3 3 3>,
-			<&gpk1 5 3 3 3>,
-			<&gpk1 6 3 3 3>;
+		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
+		pinctrl-names = "default";
 		vmmc-supply = <&vemmc_reg>;
 		status = "okay";
 	};
@@ -73,12 +64,74 @@
 		status = "okay";
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		vol-down-key {
+			gpios = <&gpx2 1 1>;
+			linux,code = <114>;
+			label = "volume down";
+			debounce-interval = <10>;
+		};
+
+		vol-up-key {
+			gpios = <&gpx2 0 1>;
+			linux,code = <115>;
+			label = "volume up";
+			debounce-interval = <10>;
+		};
+
+		power-key {
+			gpios = <&gpx2 7 1>;
+			linux,code = <116>;
+			label = "power";
+			debounce-interval = <10>;
+			gpio-key,wakeup;
+		};
+
+		ok-key {
+			gpios = <&gpx3 5 1>;
+			linux,code = <352>;
+			label = "ok";
+			debounce-interval = <10>;
+		};
+	};
+
+	tsp_reg: voltage-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "TSP_FIXED_VOLTAGES";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpl0 3 0>;
+		enable-active-high;
+	};
+
+	i2c@13890000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-slave-addr = <0x10>;
+		samsung,i2c-max-bus-freq = <400000>;
+		pinctrl-0 = <&i2c3_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		mms114-touchscreen@48 {
+			compatible = "melfas,mms114";
+			reg = <0x48>;
+			interrupt-parent = <&gpx0>;
+			interrupts = <4 2>;
+			x-size = <720>;
+			y-size = <1280>;
+			avdd-supply = <&tsp_reg>;
+			vdd-supply = <&tsp_reg>;
+		};
+	};
+
 	i2c@138B0000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-slave-addr = <0x10>;
 		samsung,i2c-max-bus-freq = <100000>;
-		gpios = <&gpb 6 3 3 0>,
-			<&gpb 7 3 3 0>;
+		pinctrl-0 = <&i2c5_bus>;
+		pinctrl-names = "default";
 		status = "okay";
 
 		max8997_pmic@66 {
@@ -93,9 +146,9 @@
 			max8997,pmic-ignore-gpiodvs-side-effect;
 			max8997,pmic-buck125-default-dvs-idx = <0>;
 
-			max8997,pmic-buck125-dvs-gpios = <&gpx0 5 1 0 0>,
-						         <&gpx0 6 1 0 0>,
-							 <&gpl0 0 1 0 0>;
+			max8997,pmic-buck125-dvs-gpios = <&gpx0 5 0>,
+						         <&gpx0 6 0>,
+							 <&gpl0 0 0>;
 
 			max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
 							 <1250000>, <1200000>,
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 214c557eda7..e31bfc4a6f0 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -31,6 +31,11 @@
 		pinctrl2 = &pinctrl_2;
 	};
 
+	pd_lcd1: lcd1-power-domain@10023CA0 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10023CA0 0x20>;
+	};
+
 	gic:interrupt-controller@10490000 {
 		cpu-offset = <0x8000>;
 	};
@@ -46,27 +51,17 @@
 		compatible = "samsung,pinctrl-exynos4210";
 		reg = <0x11400000 0x1000>;
 		interrupts = <0 47 0>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
 	};
 
 	pinctrl_1: pinctrl@11000000 {
 		compatible = "samsung,pinctrl-exynos4210";
 		reg = <0x11000000 0x1000>;
 		interrupts = <0 46 0>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
 
 		wakup_eint: wakeup-interrupt-controller {
 			compatible = "samsung,exynos4210-wakeup-eint";
 			interrupt-parent = <&gic>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
-				     <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
-				     <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
-				     <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>,
-				     <0 32 0>;
+			interrupts = <0 32 0>;
 		};
 	};
 
@@ -75,232 +70,10 @@
 		reg = <0x03860000 0x1000>;
 	};
 
-	gpio-controllers {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		gpio-controller;
-		ranges;
-
-		gpa0: gpio-controller@11400000 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400000 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpa1: gpio-controller@11400020 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400020 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpb: gpio-controller@11400040 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400040 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpc0: gpio-controller@11400060 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400060 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpc1: gpio-controller@11400080 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400080 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpd0: gpio-controller@114000A0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x114000A0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpd1: gpio-controller@114000C0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x114000C0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpe0: gpio-controller@114000E0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x114000E0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpe1: gpio-controller@11400100 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400100 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpe2: gpio-controller@11400120 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400120 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpe3: gpio-controller@11400140 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400140 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpe4: gpio-controller@11400160 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400160 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpf0: gpio-controller@11400180 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400180 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpf1: gpio-controller@114001A0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x114001A0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpf2: gpio-controller@114001C0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x114001C0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpf3: gpio-controller@114001E0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x114001E0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpj0: gpio-controller@11000000 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000000 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpj1: gpio-controller@11000020 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000020 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpk0: gpio-controller@11000040 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000040 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpk1: gpio-controller@11000060 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000060 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpk2: gpio-controller@11000080 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000080 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpk3: gpio-controller@110000A0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x110000A0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpl0: gpio-controller@110000C0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x110000C0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpl1: gpio-controller@110000E0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x110000E0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpl2: gpio-controller@11000100 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000100 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy0: gpio-controller@11000120 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000120 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy1: gpio-controller@11000140 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000140 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy2: gpio-controller@11000160 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000160 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy3: gpio-controller@11000180 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000180 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy4: gpio-controller@110001A0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x110001A0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy5: gpio-controller@110001C0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x110001C0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy6: gpio-controller@110001E0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x110001E0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpx0: gpio-controller@11000C00 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000C00 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpx1: gpio-controller@11000C20 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000C20 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpx2: gpio-controller@11000C40 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000C40 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpx3: gpio-controller@11000C60 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000C60 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpz: gpio-controller@03860000 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x03860000 0x20>;
-			#gpio-cells = <4>;
-		};
+	tmu@100C0000 {
+		compatible = "samsung,exynos4210-tmu";
+		interrupt-parent = <&combiner>;
+		reg = <0x100C0000 0x100>;
+		interrupts = <2 4>;
 	};
 };
diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi
new file mode 100644
index 00000000000..c6ae2005961
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4212.dtsi
@@ -0,0 +1,28 @@
+/*
+ * Samsung's Exynos4212 SoC device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos4212 SoC device nodes are listed in this file. Exynos4212
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos4212 SoC. As device tree coverage for Exynos4212 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/include/ "exynos4x12.dtsi"
+
+/ {
+	compatible = "samsung,exynos4212";
+
+	gic:interrupt-controller@10490000 {
+		cpu-offset = <0x8000>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts
new file mode 100644
index 00000000000..f05bf575cc4
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts
@@ -0,0 +1,45 @@
+/*
+ * Samsung's Exynos4412 based SMDK board device tree source
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Device tree source file for Samsung's SMDK4412 board which is based on
+ * Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos4412.dtsi"
+
+/ {
+	model = "Samsung SMDK evaluation board based on Exynos4412";
+	compatible = "samsung,smdk4412", "samsung,exynos4412";
+
+	memory {
+		reg = <0x40000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
+	};
+
+	serial@13800000 {
+		status = "okay";
+	};
+
+	serial@13810000 {
+		status = "okay";
+	};
+
+	serial@13820000 {
+		status = "okay";
+	};
+
+	serial@13830000 {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
new file mode 100644
index 00000000000..d7dfe312772
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -0,0 +1,28 @@
+/*
+ * Samsung's Exynos4412 SoC device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos4412 SoC device nodes are listed in this file. Exynos4412
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos4412 SoC. As device tree coverage for Exynos4412 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/include/ "exynos4x12.dtsi"
+
+/ {
+	compatible = "samsung,exynos4412";
+
+	gic:interrupt-controller@10490000 {
+		cpu-offset = <0x4000>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
new file mode 100644
index 00000000000..8e6115adcd9
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
@@ -0,0 +1,965 @@
+/*
+ * Samsung's Exynos4x12 SoCs pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos4x12 SoCs pin-mux and pin-config optiosn are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/ {
+	pinctrl@11400000 {
+		gpa0: gpa0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpa1: gpa1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb: gpb {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc0: gpc0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc1: gpc1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpd0: gpd0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpd1: gpd1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf0: gpf0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf1: gpf1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf2: gpf2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf3: gpf3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpj0: gpj0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpj1: gpj1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		uart0_data: uart0-data {
+			samsung,pins = "gpa0-0", "gpa0-1";
+			samsung,pin-function = <0x2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart0_fctl: uart0-fctl {
+			samsung,pins = "gpa0-2", "gpa0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart1_data: uart1-data {
+			samsung,pins = "gpa0-4", "gpa0-5";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart1_fctl: uart1-fctl {
+			samsung,pins = "gpa0-6", "gpa0-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c2_bus: i2c2-bus {
+			samsung,pins = "gpa0-6", "gpa0-7";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart2_data: uart2-data {
+			samsung,pins = "gpa1-0", "gpa1-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart2_fctl: uart2-fctl {
+			samsung,pins = "gpa1-2", "gpa1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart_audio_a: uart-audio-a {
+			samsung,pins = "gpa1-0", "gpa1-1";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c3_bus: i2c3-bus {
+			samsung,pins = "gpa1-2", "gpa1-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart3_data: uart3-data {
+			samsung,pins = "gpa1-4", "gpa1-5";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart_audio_b: uart-audio-b {
+			samsung,pins = "gpa1-4", "gpa1-5";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		spi0_bus: spi0-bus {
+			samsung,pins = "gpb-0", "gpb-2", "gpb-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c4_bus: i2c4-bus {
+			samsung,pins = "gpb-0", "gpb-1";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		spi1_bus: spi1-bus {
+			samsung,pins = "gpb-4", "gpb-6", "gpb-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c5_bus: i2c5-bus {
+			samsung,pins = "gpb-2", "gpb-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2s1_bus: i2s1-bus {
+			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+					"gpc0-4";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pcm1_bus: pcm1-bus {
+			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+					"gpc0-4";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		ac97_bus: ac97-bus {
+			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+					"gpc0-4";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2s2_bus: i2s2-bus {
+			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+					"gpc1-4";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pcm2_bus: pcm2-bus {
+			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+					"gpc1-4";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		spdif_bus: spdif-bus {
+			samsung,pins = "gpc1-0", "gpc1-1";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c6_bus: i2c6-bus {
+			samsung,pins = "gpc1-3", "gpc1-4";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		spi2_bus: spi2-bus {
+			samsung,pins = "gpc1-1", "gpc1-3", "gpc1-4";
+			samsung,pin-function = <5>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		pwm0_out: pwm0-out {
+			samsung,pins = "gpd0-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pwm1_out: pwm1-out {
+			samsung,pins = "gpd0-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		lcd_ctrl: lcd-ctrl {
+			samsung,pins = "gpd0-0", "gpd0-1";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c7_bus: i2c7-bus {
+			samsung,pins = "gpd0-2", "gpd0-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		pwm2_out: pwm2-out {
+			samsung,pins = "gpd0-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pwm3_out: pwm3-out {
+			samsung,pins = "gpd0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c0_bus: i2c0-bus {
+			samsung,pins = "gpd1-0", "gpd1-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		mipi0_clk: mipi0-clk {
+			samsung,pins = "gpd1-0", "gpd1-1";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c1_bus: i2c1-bus {
+			samsung,pins = "gpd1-2", "gpd1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		mipi1_clk: mipi1-clk {
+			samsung,pins = "gpd1-2", "gpd1-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		lcd_clk: lcd-clk {
+			samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		lcd_data16: lcd-data-width16 {
+			samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2",
+					"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
+					"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
+					"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		lcd_data18: lcd-data-width18 {
+			samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1",
+					"gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7",
+					"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
+					"gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1",
+					"gpf3-2", "gpf3-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		lcd_data24: lcd-data-width24 {
+			samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
+					"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
+					"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
+					"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
+					"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
+					"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		lcd_ldi: lcd-ldi {
+			samsung,pins = "gpf3-4";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_port_a: cam-port-a {
+			samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
+					"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
+					"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-3",
+					"gpj1-4";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
+	pinctrl@11000000 {
+		gpk0: gpk0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpk1: gpk1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpk2: gpk2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpk3: gpk3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpl0: gpl0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpl1: gpl1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpl2: gpl2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpm0: gpm0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpm1: gpm1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpm2: gpm2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpm3: gpm3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpm4: gpm4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpy0: gpy0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy1: gpy1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy2: gpy2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy3: gpy3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy4: gpy4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy5: gpy5 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy6: gpy6 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpx0: gpx0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
+				     <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
+			#interrupt-cells = <2>;
+		};
+
+		gpx1: gpx1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
+				     <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
+			#interrupt-cells = <2>;
+		};
+
+		gpx2: gpx2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpx3: gpx3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		sd0_clk: sd0-clk {
+			samsung,pins = "gpk0-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_cmd: sd0-cmd {
+			samsung,pins = "gpk0-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_cd: sd0-cd {
+			samsung,pins = "gpk0-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_bus1: sd0-bus-width1 {
+			samsung,pins = "gpk0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_bus4: sd0-bus-width4 {
+			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_bus8: sd0-bus-width8 {
+			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd4_clk: sd4-clk {
+			samsung,pins = "gpk0-0";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd4_cmd: sd4-cmd {
+			samsung,pins = "gpk0-1";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd4_cd: sd4-cd {
+			samsung,pins = "gpk0-2";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd4_bus1: sd4-bus-width1 {
+			samsung,pins = "gpk0-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd4_bus4: sd4-bus-width4 {
+			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd4_bus8: sd4-bus-width8 {
+			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <4>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_clk: sd1-clk {
+			samsung,pins = "gpk1-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_cmd: sd1-cmd {
+			samsung,pins = "gpk1-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_cd: sd1-cd {
+			samsung,pins = "gpk1-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_bus1: sd1-bus-width1 {
+			samsung,pins = "gpk1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_bus4: sd1-bus-width4 {
+			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_clk: sd2-clk {
+			samsung,pins = "gpk2-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_cmd: sd2-cmd {
+			samsung,pins = "gpk2-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_cd: sd2-cd {
+			samsung,pins = "gpk2-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_bus1: sd2-bus-width1 {
+			samsung,pins = "gpk2-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_bus4: sd2-bus-width4 {
+			samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_bus8: sd2-bus-width8 {
+			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd3_clk: sd3-clk {
+			samsung,pins = "gpk3-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd3_cmd: sd3-cmd {
+			samsung,pins = "gpk3-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd3_cd: sd3-cd {
+			samsung,pins = "gpk3-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd3_bus1: sd3-bus-width1 {
+			samsung,pins = "gpk3-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd3_bus4: sd3-bus-width4 {
+			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		keypad_col0: keypad-col0 {
+			samsung,pins = "gpl2-0";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		keypad_col1: keypad-col1 {
+			samsung,pins = "gpl2-1";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		keypad_col2: keypad-col2 {
+			samsung,pins = "gpl2-2";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		keypad_col3: keypad-col3 {
+			samsung,pins = "gpl2-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		keypad_col4: keypad-col4 {
+			samsung,pins = "gpl2-4";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		keypad_col5: keypad-col5 {
+			samsung,pins = "gpl2-5";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		keypad_col6: keypad-col6 {
+			samsung,pins = "gpl2-6";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		keypad_col7: keypad-col7 {
+			samsung,pins = "gpl2-7";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_port_b: cam-port-b {
+			samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
+					"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
+					"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1",
+					"gpm2-2";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		eint0: ext-int0 {
+			samsung,pins = "gpx0-0";
+			samsung,pin-function = <0xf>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		eint8: ext-int8 {
+			samsung,pins = "gpx1-0";
+			samsung,pin-function = <0xf>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		eint15: ext-int15 {
+			samsung,pins = "gpx1-7";
+			samsung,pin-function = <0xf>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		eint16: ext-int16 {
+			samsung,pins = "gpx2-0";
+			samsung,pin-function = <0xf>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		eint31: ext-int31 {
+			samsung,pins = "gpx3-7";
+			samsung,pin-function = <0xf>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
+	pinctrl@03860000 {
+		gpz: gpz {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		i2s0_bus: i2s0-bus {
+			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+					"gpz-4", "gpz-5", "gpz-6";
+			samsung,pin-function = <0x2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pcm0_bus: pcm0-bus {
+			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+					"gpz-4";
+			samsung,pin-function = <0x3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
+	pinctrl@106E0000 {
+		gpv0: gpv0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpv1: gpv1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpv2: gpv2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpv3: gpv3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpv4: gpv4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		c2c_bus: c2c-bus {
+			samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
+					"gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
+					"gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
+					"gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7",
+					"gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3",
+					"gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
+					"gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
+					"gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7",
+					"gpv4-0", "gpv4-1";
+			samsung,pin-function = <0x2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
new file mode 100644
index 00000000000..179a62e46c9
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -0,0 +1,69 @@
+/*
+ * Samsung's Exynos4x12 SoCs device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos4x12 SoCs device nodes are listed in this file. Exynos4x12
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos4x12 SoC. As device tree coverage for Exynos4x12 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/include/ "exynos4.dtsi"
+/include/ "exynos4x12-pinctrl.dtsi"
+
+/ {
+	aliases {
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		pinctrl2 = &pinctrl_2;
+		pinctrl3 = &pinctrl_3;
+	};
+
+	combiner:interrupt-controller@10440000 {
+		interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+			     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
+			     <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+			     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
+			     <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>;
+	};
+
+	pinctrl_0: pinctrl@11400000 {
+		compatible = "samsung,pinctrl-exynos4x12";
+		reg = <0x11400000 0x1000>;
+		interrupts = <0 47 0>;
+	};
+
+	pinctrl_1: pinctrl@11000000 {
+		compatible = "samsung,pinctrl-exynos4x12";
+		reg = <0x11000000 0x1000>;
+		interrupts = <0 46 0>;
+
+		wakup_eint: wakeup-interrupt-controller {
+			compatible = "samsung,exynos4210-wakeup-eint";
+			interrupt-parent = <&gic>;
+			interrupts = <0 32 0>;
+		};
+	};
+
+	pinctrl_2: pinctrl@03860000 {
+		compatible = "samsung,pinctrl-exynos4x12";
+		reg = <0x03860000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <10 0>;
+	};
+
+	pinctrl_3: pinctrl@106E0000 {
+		compatible = "samsung,pinctrl-exynos4x12";
+		reg = <0x106E0000 0x1000>;
+		interrupts = <0 72 0>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index a352df403b7..942d5761ca9 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -17,10 +17,6 @@
 	compatible = "samsung,smdk5250", "samsung,exynos5250";
 
 	aliases {
-		mshc0 = &dwmmc_0;
-		mshc1 = &dwmmc_1;
-		mshc2 = &dwmmc_2;
-		mshc3 = &dwmmc_3;
 	};
 
 	memory {
@@ -55,8 +51,31 @@
 		};
 	};
 
+	i2c@121D0000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <40000>;
+		samsung,i2c-slave-addr = <0x38>;
+
+		sata-phy {
+			compatible = "samsung,sata-phy";
+			reg = <0x38>;
+		};
+	};
+
+	sata@122F0000 {
+		samsung,sata-freq = <66>;
+	};
+
 	i2c@12C80000 {
-		status = "disabled";
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <66000>;
+		gpios = <&gpa0 6 3 3 0>,
+			<&gpa0 7 3 3 0>;
+
+		hdmiddc@50 {
+			compatible = "samsung,exynos5-hdmiddc";
+			reg = <0x50>;
+		};
 	};
 
 	i2c@12C90000 {
@@ -79,7 +98,17 @@
 		status = "disabled";
 	};
 
-	dwmmc_0: dwmmc0@12200000 {
+	i2c@12CE0000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <66000>;
+
+		hdmiphy@38 {
+			compatible = "samsung,exynos5-hdmiphy";
+			reg = <0x38>;
+		};
+	};
+
+	dwmmc0@12200000 {
 		num-slots = <1>;
 		supports-highspeed;
 		broken-cd;
@@ -100,11 +129,11 @@
 		};
 	};
 
-	dwmmc_1: dwmmc1@12210000 {
+	dwmmc1@12210000 {
 		status = "disabled";
 	};
 
-	dwmmc_2: dwmmc2@12220000 {
+	dwmmc2@12220000 {
 		num-slots = <1>;
 		supports-highspeed;
 		fifo-depth = <0x80>;
@@ -125,7 +154,7 @@
 		};
 	};
 
-	dwmmc_3: dwmmc3@12230000 {
+	dwmmc3@12230000 {
 		status = "disabled";
 	};
 
@@ -166,4 +195,13 @@
 	spi_2: spi@12d40000 {
 		status = "disabled";
 	};
+
+	hdmi {
+		hpd-gpio = <&gpx3 7 0xf 1 3>;
+	};
+
+	codec@11000000 {
+		samsung,mfc-r = <0x43000000 0x800000>;
+		samsung,mfc-l = <0x51000000 0x800000>;
+	};
 };
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
new file mode 100644
index 00000000000..17dd951c1cd
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -0,0 +1,43 @@
+/*
+ * Google Snow board device tree source
+ *
+ * Copyright (c) 2012 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos5250.dtsi"
+/include/ "cros5250-common.dtsi"
+
+/ {
+	model = "Google Snow";
+	compatible = "google,snow", "samsung,exynos5250";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		lid-switch {
+			label = "Lid";
+			gpios = <&gpx3 5 0 0x10000 0>;
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <0>; /* SW_LID */
+			debounce-interval = <1>;
+			gpio-key,wakeup;
+		};
+	};
+
+	/*
+	 * On Snow we've got SIP WiFi and so can keep drive strengths low to
+	 * reduce EMI.
+	 */
+	dwmmc3@12230000 {
+		slot@0 {
+			gpios = <&gpc4 0 2 0 0>, <&gpc4 1 2 3 0>,
+				<&gpc4 3 2 3 0>, <&gpc4 4 2 3 0>,
+				<&gpc4 5 2 3 0>, <&gpc4 6 2 3 0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index dddfd6e444d..36d8246ea50 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -31,6 +31,10 @@
 		gsc1 = &gsc_1;
 		gsc2 = &gsc_2;
 		gsc3 = &gsc_3;
+		mshc0 = &dwmmc_0;
+		mshc1 = &dwmmc_1;
+		mshc2 = &dwmmc_2;
+		mshc3 = &dwmmc_3;
 	};
 
 	gic:interrupt-controller@10481000 {
@@ -62,12 +66,24 @@
 		interrupts = <0 42 0>;
 	};
 
+	codec@11000000 {
+		compatible = "samsung,mfc-v6";
+		reg = <0x11000000 0x10000>;
+		interrupts = <0 96 0>;
+	};
+
 	rtc {
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x101E0000 0x100>;
 		interrupts = <0 43 0>, <0 44 0>;
 	};
 
+	tmu@10060000 {
+		compatible = "samsung,exynos5250-tmu";
+		reg = <0x10060000 0x100>;
+		interrupts = <0 65 0>;
+	};
+
 	serial@12C00000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x12C00000 0x100>;
@@ -92,6 +108,17 @@
 		interrupts = <0 54 0>;
 	};
 
+	sata@122F0000 {
+		compatible = "samsung,exynos5-sata-ahci";
+		reg = <0x122F0000 0x1ff>;
+		interrupts = <0 115 0>;
+	};
+
+	sata-phy@12170000 {
+		compatible = "samsung,exynos5-sata-phy";
+		reg = <0x12170000 0x1ff>;
+	};
+
 	i2c@12C60000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12C60000 0x100>;
@@ -156,6 +183,21 @@
 		#size-cells = <0>;
 	};
 
+	i2c@12CE0000 {
+		compatible = "samsung,s3c2440-hdmiphy-i2c";
+		reg = <0x12CE0000 0x1000>;
+		interrupts = <0 64 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	i2c@121D0000 {
+                compatible = "samsung,exynos5-sata-phy-i2c";
+                reg = <0x121D0000 0x100>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+	};
+
 	spi_0: spi@12d20000 {
 		compatible = "samsung,exynos4210-spi";
 		reg = <0x12d20000 0x100>;
@@ -186,7 +228,7 @@
 		#size-cells = <0>;
 	};
 
-	dwmmc0@12200000 {
+	dwmmc_0: dwmmc0@12200000 {
 		compatible = "samsung,exynos5250-dw-mshc";
 		reg = <0x12200000 0x1000>;
 		interrupts = <0 75 0>;
@@ -194,7 +236,7 @@
 		#size-cells = <0>;
 	};
 
-	dwmmc1@12210000 {
+	dwmmc_1: dwmmc1@12210000 {
 		compatible = "samsung,exynos5250-dw-mshc";
 		reg = <0x12210000 0x1000>;
 		interrupts = <0 76 0>;
@@ -202,7 +244,7 @@
 		#size-cells = <0>;
 	};
 
-	dwmmc2@12220000 {
+	dwmmc_2: dwmmc2@12220000 {
 		compatible = "samsung,exynos5250-dw-mshc";
 		reg = <0x12220000 0x1000>;
 		interrupts = <0 77 0>;
@@ -210,7 +252,7 @@
 		#size-cells = <0>;
 	};
 
-	dwmmc3@12230000 {
+	dwmmc_3: dwmmc3@12230000 {
 		compatible = "samsung,exynos5250-dw-mshc";
 		reg = <0x12230000 0x1000>;
 		interrupts = <0 78 0>;
@@ -520,4 +562,16 @@
 		reg = <0x13e30000 0x1000>;
 		interrupts = <0 88 0>;
 	};
+
+	hdmi {
+		compatible = "samsung,exynos5-hdmi";
+		reg = <0x14530000 0x100000>;
+		interrupts = <0 95 0>;
+	};
+
+	mixer {
+		compatible = "samsung,exynos5-mixer";
+		reg = <0x14450000 0x10000>;
+		interrupts = <0 94 0>;
+	};
 };
diff --git a/arch/arm/boot/dts/href.dtsi b/arch/arm/boot/dts/href.dtsi
new file mode 100644
index 00000000000..592fb9dc35b
--- /dev/null
+++ b/arch/arm/boot/dts/href.dtsi
@@ -0,0 +1,273 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "dbx5x0.dtsi"
+
+/ {
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@1 {
+			linux,code = <11>;
+			label = "SFH7741 Proximity Sensor";
+		};
+	};
+
+	soc-u9500 {
+		uart@80120000 {
+			status = "okay";
+		};
+
+		uart@80121000 {
+			status = "okay";
+		};
+
+		uart@80007000 {
+			status = "okay";
+		};
+
+		i2c@80004000 {
+			tc3589x@42 {
+				compatible = "tc3589x";
+				reg = <0x42>;
+				interrupt-parent = <&gpio6>;
+				interrupts = <25 0x1>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				tc3589x_gpio: tc3589x_gpio {
+					compatible = "tc3589x-gpio";
+					interrupts = <0 0x1>;
+
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+			};
+		};
+
+		i2c@80128000 {
+			lp5521@0x33 {
+				compatible = "lp5521";
+				reg = <0x33>;
+			};
+
+			lp5521@0x34 {
+				compatible = "lp5521";
+				reg = <0x34>;
+			};
+
+			bh1780@0x29 {
+				compatible = "rohm,bh1780gli";
+				reg = <0x33>;
+			};
+		};
+
+		// External Micro SD slot
+		sdi0_per1@80126000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <4>;
+			mmc-cap-sd-highspeed;
+			mmc-cap-mmc-highspeed;
+			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+
+			cd-gpios  = <&tc3589x_gpio 3 0x4>;
+
+			status = "okay";
+		};
+
+		// WLAN SDIO channel
+		sdi1_per2@80118000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <4>;
+
+			status = "okay";
+		};
+
+		// PoP:ed eMMC
+		sdi2_per3@80005000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <8>;
+			mmc-cap-mmc-highspeed;
+
+			status = "okay";
+		};
+
+		// On-board eMMC
+		sdi4_per2@80114000 {
+			arm,primecell-periphid = <0x10480180>;
+		        max-frequency = <50000000>;
+			bus-width = <8>;
+			mmc-cap-mmc-highspeed;
+			vmmc-supply = <&ab8500_ldo_aux2_reg>;
+
+			status = "okay";
+		};
+
+		sound {
+			compatible = "stericsson,snd-soc-mop500";
+
+			stericsson,cpu-dai = <&msp1 &msp3>;
+			stericsson,audio-codec = <&codec>;
+		};
+
+		msp1: msp@80124000 {
+			status = "okay";
+		};
+
+		msp3: msp@80125000 {
+			status = "okay";
+		};
+
+		prcmu@80157000 {
+			db8500-prcmu-regulators {
+				db8500_vape_reg: db8500_vape {
+					regulator-name = "db8500-vape";
+				};
+
+				db8500_varm_reg: db8500_varm {
+					regulator-name = "db8500-varm";
+				};
+
+				db8500_vmodem_reg: db8500_vmodem {
+					regulator-name = "db8500-vmodem";
+				};
+
+				db8500_vpll_reg: db8500_vpll {
+					regulator-name = "db8500-vpll";
+				};
+
+				db8500_vsmps1_reg: db8500_vsmps1 {
+					regulator-name = "db8500-vsmps1";
+				};
+
+				db8500_vsmps2_reg: db8500_vsmps2 {
+					regulator-name = "db8500-vsmps2";
+				};
+
+				db8500_vsmps3_reg: db8500_vsmps3 {
+					regulator-name = "db8500-vsmps3";
+				};
+
+				db8500_vrf1_reg: db8500_vrf1 {
+					regulator-name = "db8500-vrf1";
+				};
+
+				db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
+					regulator-name = "db8500-sva-mmdsp";
+				};
+
+				db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
+					regulator-name = "db8500-sva-mmdsp-ret";
+				};
+
+				db8500_sva_pipe_reg: db8500_sva_pipe {
+					regulator-name = "db8500_sva_pipe";
+				};
+
+				db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
+					regulator-name = "db8500_sia_mmdsp";
+				};
+
+				db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
+					regulator-name = "db8500-sia-mmdsp-ret";
+				};
+
+				db8500_sia_pipe_reg: db8500_sia_pipe {
+					regulator-name = "db8500-sia-pipe";
+				};
+
+				db8500_sga_reg: db8500_sga {
+					regulator-name = "db8500-sga";
+				};
+
+				db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
+					regulator-name = "db8500-b2r2-mcde";
+				};
+
+				db8500_esram12_reg: db8500_esram12 {
+					regulator-name = "db8500-esram12";
+				};
+
+				db8500_esram12_ret_reg: db8500_esram12_ret {
+					regulator-name = "db8500-esram12-ret";
+				};
+
+				db8500_esram34_reg: db8500_esram34 {
+					regulator-name = "db8500-esram34";
+				};
+
+				db8500_esram34_ret_reg: db8500_esram34_ret {
+					regulator-name = "db8500-esram34-ret";
+				};
+			};
+
+			ab8500@5 {
+				ab8500-regulators {
+					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+						regulator-name = "V-DISPLAY";
+					};
+
+					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+						regulator-name = "V-eMMC1";
+					};
+
+					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+						regulator-name = "V-MMC-SD";
+					};
+
+					ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
+						regulator-name = "V-INTCORE";
+					};
+
+					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+						regulator-name = "V-TVOUT";
+					};
+
+					ab8500_ldo_usb_reg: ab8500_ldo_usb {
+						regulator-name = "dummy";
+					};
+
+					ab8500_ldo_audio_reg: ab8500_ldo_audio {
+						regulator-name = "V-AUD";
+					};
+
+					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+						regulator-name = "V-AMIC1";
+					};
+
+					ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
+						regulator-name = "V-AMIC2";
+					};
+
+					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+						regulator-name = "V-DMIC";
+					};
+
+					ab8500_ldo_ana_reg: ab8500_ldo_ana {
+						regulator-name = "V-CSI/DSI";
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/hrefprev60.dts b/arch/arm/boot/dts/hrefprev60.dts
new file mode 100644
index 00000000000..eec29c4a86d
--- /dev/null
+++ b/arch/arm/boot/dts/hrefprev60.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "dbx5x0.dtsi"
+/include/ "href.dtsi"
+/include/ "stuib.dtsi"
+
+/ {
+	model = "ST-Ericsson HREF (pre-v60) platform with Device Tree";
+	compatible = "st-ericsson,mop500", "st-ericsson,u8500";
+
+	gpio_keys {
+		button@1 {
+			gpios = <&tc3589x_gpio 7 0x4>;
+		};
+	};
+
+	soc-u9500 {
+		i2c@80004000 {
+			tps61052@33 {
+				compatible = "tps61052";
+				reg = <0x33>;
+			};
+		};
+
+		i2c@80110000 {
+			bu21013_tp@0x5c {
+				reset-gpio = <&tc3589x_gpio 13 0x4>;
+			};
+		};
+
+		vmmci: regulator-gpio {
+			gpios = <&tc3589x_gpio 18 0x4>;
+			gpio-enable = <&tc3589x_gpio 17 0x4>;
+
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts
index 2131d77dc9c..55f4191a626 100644
--- a/arch/arm/boot/dts/hrefv60plus.dts
+++ b/arch/arm/boot/dts/hrefv60plus.dts
@@ -11,85 +11,200 @@
 
 /dts-v1/;
 /include/ "dbx5x0.dtsi"
+/include/ "href.dtsi"
+/include/ "stuib.dtsi"
 
 / {
-	model = "ST-Ericsson HREF platform with Device Tree";
-	compatible = "st-ericsson,hrefv60+";
+	model = "ST-Ericsson HREF (v60+) platform with Device Tree";
+	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
 
-	memory {
-		reg = <0x00000000 0x20000000>;
+	gpio_keys {
+		button@1 {
+			gpios = <&gpio6 25 0x4>;
+		};
 	};
 
 	soc-u9500 {
-		uart@80120000 {
+		i2c@80110000 {
+			bu21013_tp@0x5c {
+				reset-gpio = <&gpio4 15 0x4>;
+			};
+		};
+
+		// External Micro SD slot
+		sdi0_per1@80126000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <4>;
+			mmc-cap-sd-highspeed;
+			mmc-cap-mmc-highspeed;
+			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+
+			cd-gpios  = <&tc3589x_gpio 3 0x4>;
+
 			status = "okay";
 		};
 
-		uart@80121000 {
+		// WLAN SDIO channel
+		sdi1_per2@80118000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <4>;
+
 			status = "okay";
 		};
 
-		uart@80007000 {
+		// PoP:ed eMMC
+		sdi2_per3@80005000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <8>;
+			mmc-cap-mmc-highspeed;
+
 			status = "okay";
 		};
 
-		i2c@80004000 {
-			tc3589x@42 {
-				compatible = "tc3589x";
-				reg = <0x42>;
-				interrupt-parent = <&gpio6>;
-				interrupts = <25 0x1>;
+		// On-board eMMC
+		sdi4_per2@80114000 {
+			arm,primecell-periphid = <0x10480180>;
+		        max-frequency = <50000000>;
+			bus-width = <8>;
+			mmc-cap-mmc-highspeed;
+			vmmc-supply = <&ab8500_ldo_aux2_reg>;
 
-				interrupt-controller;
-				#interrupt-cells = <2>;
+			status = "okay";
+		};
 
-				tc3589x_gpio: tc3589x_gpio {
-					compatible = "tc3589x-gpio";
-					interrupts = <0 0x1>;
+		prcmu@80157000 {
+			db8500-prcmu-regulators {
+				db8500_vape_reg: db8500_vape {
+					regulator-name = "db8500-vape";
+				};
 
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					#gpio-cells = <2>;
+				db8500_varm_reg: db8500_varm {
+					regulator-name = "db8500-varm";
 				};
-			};
 
-			tps61052@33 {
-				compatible = "tps61052";
-				reg = <0x33>;
-			};
-		};
+				db8500_vmodem_reg: db8500_vmodem {
+					regulator-name = "db8500-vmodem";
+				};
 
-		i2c@80128000 {
-			lp5521@0x33 {
-				compatible = "lp5521";
-				reg = <0x33>;
-			};
+				db8500_vpll_reg: db8500_vpll {
+					regulator-name = "db8500-vpll";
+				};
 
-			lp5521@0x34 {
-				compatible = "lp5521";
-				reg = <0x34>;
-			};
+				db8500_vsmps1_reg: db8500_vsmps1 {
+					regulator-name = "db8500-vsmps1";
+				};
+
+				db8500_vsmps2_reg: db8500_vsmps2 {
+					regulator-name = "db8500-vsmps2";
+				};
+
+				db8500_vsmps3_reg: db8500_vsmps3 {
+					regulator-name = "db8500-vsmps3";
+				};
+
+				db8500_vrf1_reg: db8500_vrf1 {
+					regulator-name = "db8500-vrf1";
+				};
+
+				db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
+					regulator-name = "db8500-sva-mmdsp";
+				};
+
+				db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
+					regulator-name = "db8500-sva-mmdsp-ret";
+				};
+
+				db8500_sva_pipe_reg: db8500_sva_pipe {
+					regulator-name = "db8500_sva_pipe";
+				};
 
-			bh1780@0x29 {
-				compatible = "rohm,bh1780gli";
-				reg = <0x33>;
+				db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
+					regulator-name = "db8500_sia_mmdsp";
+				};
+
+				db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
+					regulator-name = "db8500-sia-mmdsp-ret";
+				};
+
+				db8500_sia_pipe_reg: db8500_sia_pipe {
+					regulator-name = "db8500-sia-pipe";
+				};
+
+				db8500_sga_reg: db8500_sga {
+					regulator-name = "db8500-sga";
+				};
+
+				db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
+					regulator-name = "db8500-b2r2-mcde";
+				};
+
+				db8500_esram12_reg: db8500_esram12 {
+					regulator-name = "db8500-esram12";
+				};
+
+				db8500_esram12_ret_reg: db8500_esram12_ret {
+					regulator-name = "db8500-esram12-ret";
+				};
+
+				db8500_esram34_reg: db8500_esram34 {
+					regulator-name = "db8500-esram34";
+				};
+
+				db8500_esram34_ret_reg: db8500_esram34_ret {
+					regulator-name = "db8500-esram34-ret";
+				};
 			};
-		};
 
-		sound {
-			compatible = "stericsson,snd-soc-mop500";
+			ab8500@5 {
+				ab8500-regulators {
+					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+						regulator-name = "V-DISPLAY";
+					};
 
-			stericsson,cpu-dai = <&msp1 &msp3>;
-			stericsson,audio-codec = <&codec>;
-		};
+					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+						regulator-name = "V-eMMC1";
+					};
 
-		msp1: msp@80124000 {
-			status = "okay";
-		};
+					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+						regulator-name = "V-MMC-SD";
+					};
 
-		msp3: msp@80125000 {
-			status = "okay";
+					ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
+						regulator-name = "V-INTCORE";
+					};
+
+					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+						regulator-name = "V-TVOUT";
+					};
+
+					ab8500_ldo_usb_reg: ab8500_ldo_usb {
+						regulator-name = "dummy";
+					};
+
+					ab8500_ldo_audio_reg: ab8500_ldo_audio {
+						regulator-name = "V-AUD";
+					};
+
+					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+						regulator-name = "V-AMIC1";
+					};
+
+					ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
+						regulator-name = "V-AMIC2";
+					};
+
+					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+						regulator-name = "V-DMIC";
+					};
+
+					ab8500_ldo_ana_reg: ab8500_ldo_ana {
+						regulator-name = "V-CSI/DSI";
+					};
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
index 384d8b66f33..7c43b8e70b9 100644
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
@@ -40,6 +40,15 @@
 					reg = <0>;
 					fsl,pinmux-ids = <
 						0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				led_pin_gpio0_17: led_gpio0_17@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
 						0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */
 					>;
 					fsl,drive-strength = <0>;
@@ -47,6 +56,15 @@
 					fsl,pull-up = <0>;
 				};
 			};
+
+			ssp1: ssp@80034000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx23-spi";
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi2_pins_a>;
+				status = "okay";
+			};
 		};
 
 		apbx@80040000 {
@@ -91,11 +109,12 @@
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio0_17>;
 
 		user {
 			label = "green";
-			gpios = <&gpio2 1 0>;
-			linux,default-trigger = "default-on";
+			gpios = <&gpio2 1 1>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index 6d31aa38346..65415c598a5 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -279,6 +279,19 @@
 					fsl,voltage = <1>;
 					fsl,pull-up = <0>;
 				};
+
+				spi2_pins_a: spi2@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x0182 /* MX23_PAD_GPMI_WRN__SSP2_SCK */
+						0x0142 /* MX23_PAD_GPMI_RDY1__SSP2_CMD */
+						0x0002 /* MX23_PAD_GPMI_D00__SSP2_DATA0 */
+						0x0032 /* MX23_PAD_GPMI_D03__SSP2_DATA3 */
+					>;
+					fsl,drive-strength = <1>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
 			};
 
 			digctl@8001c000 {
diff --git a/arch/arm/boot/dts/imx25-karo-tx25.dts b/arch/arm/boot/dts/imx25-karo-tx25.dts
new file mode 100644
index 00000000000..d81f8a0b979
--- /dev/null
+++ b/arch/arm/boot/dts/imx25-karo-tx25.dts
@@ -0,0 +1,44 @@
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx25.dtsi"
+
+/ {
+	model = "Ka-Ro TX25";
+	compatible = "karo,imx25-tx25", "fsl,imx25";
+
+	memory {
+		reg = <0x80000000 0x02000000 0x90000000 0x02000000>;
+	};
+
+	soc {
+		aips@43f00000 {
+			uart1: serial@43f90000 {
+				status = "okay";
+			};
+		};
+
+		spba@50000000 {
+			fec: ethernet@50038000 {
+				status = "okay";
+				phy-mode = "rmii";
+			};
+		};
+
+		emi@80000000 {
+			nand@bb000000 {
+				nand-on-flash-bbt;
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
new file mode 100644
index 00000000000..e1b13ebc96d
--- /dev/null
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -0,0 +1,515 @@
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		usb0 = &usbotg;
+		usb1 = &usbhost1;
+	};
+
+	asic: asic-interrupt-controller@68000000 {
+		compatible = "fsl,imx25-asic", "fsl,avic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x68000000 0x8000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		osc {
+			compatible = "fsl,imx-osc", "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&asic>;
+		ranges;
+
+		aips@43f00000 { /* AIPS1 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x43f00000 0x100000>;
+			ranges;
+
+			i2c1: i2c@43f80000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
+				reg = <0x43f80000 0x4000>;
+				clocks = <&clks 48>;
+				clock-names = "";
+				interrupts = <3>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@43f84000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
+				reg = <0x43f84000 0x4000>;
+				clocks = <&clks 48>;
+				clock-names = "";
+				interrupts = <10>;
+				status = "disabled";
+			};
+
+			can1: can@43f88000 {
+				compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
+				reg = <0x43f88000 0x4000>;
+				interrupts = <43>;
+				clocks = <&clks 75>, <&clks 75>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			can2: can@43f8c000 {
+				compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
+				reg = <0x43f8c000 0x4000>;
+				interrupts = <44>;
+				clocks = <&clks 76>, <&clks 76>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart1: serial@43f90000 {
+				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+				reg = <0x43f90000 0x4000>;
+				interrupts = <45>;
+				clocks = <&clks 120>, <&clks 57>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart2: serial@43f94000 {
+				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+				reg = <0x43f94000 0x4000>;
+				interrupts = <32>;
+				clocks = <&clks 121>, <&clks 57>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c2: i2c@43f98000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
+				reg = <0x43f98000 0x4000>;
+				clocks = <&clks 48>;
+				clock-names = "";
+				interrupts = <4>;
+				status = "disabled";
+			};
+
+			owire@43f9c000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x43f9c000 0x4000>;
+				clocks = <&clks 51>;
+				clock-names = "";
+				interrupts = <2>;
+				status = "disabled";
+			};
+
+			spi1: cspi@43fa4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
+				reg = <0x43fa4000 0x4000>;
+				clocks = <&clks 62>;
+				clock-names = "ipg";
+				interrupts = <14>;
+				status = "disabled";
+			};
+
+			kpp@43fa8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x43fa8000 0x4000>;
+				clocks = <&clks 102>;
+				clock-names = "";
+				interrupts = <24>;
+				status = "disabled";
+			};
+
+			iomuxc@43fac000{
+				compatible = "fsl,imx25-iomuxc";
+				reg = <0x43fac000 0x4000>;
+			};
+
+			audmux@43fb0000 {
+				compatible = "fsl,imx25-audmux", "fsl,imx31-audmux";
+				reg = <0x43fb0000 0x4000>;
+				status = "disabled";
+			};
+		};
+
+		spba@50000000 {
+			compatible = "fsl,spba-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x50000000 0x40000>;
+			ranges;
+
+			spi3: cspi@50004000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
+				reg = <0x50004000 0x4000>;
+				interrupts = <0>;
+				clocks = <&clks 80>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			uart4: serial@50008000 {
+				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+				reg = <0x50008000 0x4000>;
+				interrupts = <5>;
+				clocks = <&clks 123>, <&clks 57>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart3: serial@5000c000 {
+				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+				reg = <0x5000c000 0x4000>;
+				interrupts = <18>;
+				clocks = <&clks 122>, <&clks 57>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			spi2: cspi@50010000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
+				reg = <0x50010000 0x4000>;
+				clocks = <&clks 79>;
+				clock-names = "ipg";
+				interrupts = <13>;
+				status = "disabled";
+			};
+
+			ssi2: ssi@50014000 {
+				compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
+				reg = <0x50014000 0x4000>;
+				interrupts = <11>;
+				status = "disabled";
+			};
+
+			esai@50018000 {
+				reg = <0x50018000 0x4000>;
+				interrupts = <7>;
+			};
+
+			uart5: serial@5002c000 {
+				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+				reg = <0x5002c000 0x4000>;
+				interrupts = <40>;
+				clocks = <&clks 124>, <&clks 57>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			tsc: tsc@50030000 {
+				compatible = "fsl,imx25-adc", "fsl,imx21-tsc";
+				reg = <0x50030000 0x4000>;
+				interrupts = <46>;
+				clocks = <&clks 119>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			ssi1: ssi@50034000 {
+				compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
+				reg = <0x50034000 0x4000>;
+				interrupts = <12>;
+				status = "disabled";
+			};
+
+			fec: ethernet@50038000 {
+				compatible = "fsl,imx25-fec";
+				reg = <0x50038000 0x4000>;
+				interrupts = <57>;
+				clocks = <&clks 88>, <&clks 65>;
+				clock-names = "ipg", "ahb";
+				status = "disabled";
+			};
+		};
+
+		aips@53f00000 { /* AIPS2 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x53f00000 0x100000>;
+			ranges;
+
+			clks: ccm@53f80000 {
+				compatible = "fsl,imx25-ccm";
+				reg = <0x53f80000 0x4000>;
+				interrupts = <31>;
+				#clock-cells = <1>;
+			};
+
+			gpt4: timer@53f84000 {
+				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
+				reg = <0x53f84000 0x4000>;
+				clocks = <&clks 9>, <&clks 45>;
+				clock-names = "ipg", "per";
+				interrupts = <1>;
+			};
+
+			gpt3: timer@53f88000 {
+				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
+				reg = <0x53f88000 0x4000>;
+				clocks = <&clks 9>, <&clks 47>;
+				clock-names = "ipg", "per";
+				interrupts = <29>;
+			};
+
+			gpt2: timer@53f8c000 {
+				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
+				reg = <0x53f8c000 0x4000>;
+				clocks = <&clks 9>, <&clks 47>;
+				clock-names = "ipg", "per";
+				interrupts = <53>;
+			};
+
+			gpt1: timer@53f90000 {
+				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
+				reg = <0x53f90000 0x4000>;
+				clocks = <&clks 9>, <&clks 47>;
+				clock-names = "ipg", "per";
+				interrupts = <54>;
+			};
+
+			epit1: timer@53f94000 {
+				compatible = "fsl,imx25-epit";
+				reg = <0x53f94000 0x4000>;
+				interrupts = <28>;
+			};
+
+			epit2: timer@53f98000 {
+				compatible = "fsl,imx25-epit";
+				reg = <0x53f98000 0x4000>;
+				interrupts = <27>;
+			};
+
+			gpio4: gpio@53f9c000 {
+				compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
+				reg = <0x53f9c000 0x4000>;
+				interrupts = <23>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			pwm2: pwm@53fa0000 {
+				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
+				#pwm-cells = <2>;
+				reg = <0x53fa0000 0x4000>;
+				clocks = <&clks 106>, <&clks 36>;
+				clock-names = "ipg", "per";
+				interrupts = <36>;
+			};
+
+			gpio3: gpio@53fa4000 {
+				compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
+				reg = <0x53fa4000 0x4000>;
+				interrupts = <16>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			pwm3: pwm@53fa8000 {
+				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
+				#pwm-cells = <2>;
+				reg = <0x53fa8000 0x4000>;
+				clocks = <&clks 107>, <&clks 36>;
+				clock-names = "ipg", "per";
+				interrupts = <41>;
+			};
+
+			esdhc1: esdhc@53fb4000 {
+				compatible = "fsl,imx25-esdhc";
+				reg = <0x53fb4000 0x4000>;
+				interrupts = <9>;
+				clocks = <&clks 86>, <&clks 63>, <&clks 45>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			esdhc2: esdhc@53fb8000 {
+				compatible = "fsl,imx25-esdhc";
+				reg = <0x53fb8000 0x4000>;
+				interrupts = <8>;
+				clocks = <&clks 87>, <&clks 64>, <&clks 46>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			lcdc@53fbc000 {
+				reg = <0x53fbc000 0x4000>;
+				interrupts = <39>;
+				clocks = <&clks 103>, <&clks 66>, <&clks 49>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			slcdc@53fc0000 {
+				reg = <0x53fc0000 0x4000>;
+				interrupts = <38>;
+				status = "disabled";
+			};
+
+			pwm4: pwm@53fc8000 {
+				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
+				reg = <0x53fc8000 0x4000>;
+				clocks = <&clks 108>, <&clks 36>;
+				clock-names = "ipg", "per";
+				interrupts = <42>;
+			};
+
+			gpio1: gpio@53fcc000 {
+				compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
+				reg = <0x53fcc000 0x4000>;
+				interrupts = <52>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@53fd0000 {
+				compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
+				reg = <0x53fd0000 0x4000>;
+				interrupts = <51>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			sdma@53fd4000 {
+				compatible = "fsl,imx25-sdma", "fsl,imx35-sdma";
+				reg = <0x53fd4000 0x4000>;
+				clocks = <&clks 112>, <&clks 68>;
+				clock-names = "ipg", "ahb";
+				interrupts = <34>;
+			};
+
+			wdog@53fdc000 {
+				compatible = "fsl,imx25-wdt", "fsl,imx21-wdt";
+				reg = <0x53fdc000 0x4000>;
+				clocks = <&clks 126>;
+				clock-names = "";
+				interrupts = <55>;
+			};
+
+			pwm1: pwm@53fe0000 {
+				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
+				#pwm-cells = <2>;
+				reg = <0x53fe0000 0x4000>;
+				clocks = <&clks 105>, <&clks 36>;
+				clock-names = "ipg", "per";
+				interrupts = <26>;
+			};
+
+			usbphy1: usbphy@1 {
+				compatible = "nop-usbphy";
+				status = "disabled";
+			};
+
+			usbphy2: usbphy@2 {
+				compatible = "nop-usbphy";
+				status = "disabled";
+			};
+
+			usbotg: usb@53ff4000 {
+				compatible = "fsl,imx25-usb", "fsl,imx27-usb";
+				reg = <0x53ff4000 0x0200>;
+				interrupts = <37>;
+				clocks = <&clks 9>, <&clks 70>, <&clks 8>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,usbmisc = <&usbmisc 0>;
+				status = "disabled";
+			};
+
+			usbhost1: usb@53ff4400 {
+				compatible = "fsl,imx25-usb", "fsl,imx27-usb";
+				reg = <0x53ff4400 0x0200>;
+				interrupts = <35>;
+				clocks = <&clks 9>, <&clks 70>, <&clks 8>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,usbmisc = <&usbmisc 1>;
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@53ff4600 {
+				#index-cells = <1>;
+				compatible = "fsl,imx25-usbmisc";
+				clocks = <&clks 9>, <&clks 70>, <&clks 8>;
+				clock-names = "ipg", "ahb", "per";
+				reg = <0x53ff4600 0x00f>;
+				status = "disabled";
+			};
+
+			dryice@53ffc000 {
+				compatible = "fsl,imx25-dryice", "fsl,imx25-rtc";
+				reg = <0x53ffc000 0x4000>;
+				clocks = <&clks 81>;
+				clock-names = "ipg";
+				interrupts = <25>;
+			};
+		};
+
+		emi@80000000 {
+			compatible = "fsl,emi-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80000000 0x3b002000>;
+			ranges;
+
+			nand@bb000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				compatible = "fsl,imx25-nand";
+				reg = <0xbb000000 0x2000>;
+				clocks = <&clks 50>;
+				clock-names = "";
+				interrupts = <33>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx27-apf27.dts b/arch/arm/boot/dts/imx27-apf27.dts
new file mode 100644
index 00000000000..c0327c054de
--- /dev/null
+++ b/arch/arm/boot/dts/imx27-apf27.dts
@@ -0,0 +1,89 @@
+/*
+ * Copyright 2012 Philippe Reynes <tremyfr@yahoo.fr>
+ * Copyright 2012 Armadeus Systems <support@armadeus.com>
+ *
+ * Based on code which is: Copyright 2012 Sascha Hauer, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx27.dtsi"
+
+/ {
+	model = "Armadeus Systems APF27 module";
+	compatible = "armadeus,imx27-apf27", "fsl,imx27";
+
+	memory {
+		reg = <0xa0000000 0x04000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		osc26m {
+			compatible = "fsl,imx-osc26m", "fixed-clock";
+			clock-frequency = <0>;
+		};
+	};
+
+	soc {
+		aipi@10000000 {
+			serial@1000a000 {
+				status = "okay";
+			};
+
+			ethernet@1002b000 {
+				status = "okay";
+			};
+		};
+
+		nand@d8000000 {
+			status = "okay";
+			nand-bus-width = <16>;
+			nand-ecc-mode = "hw";
+			nand-on-flash-bbt;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x100000>;
+			};
+
+			partition@100000 {
+				label = "env";
+				reg = <0x100000 0x80000>;
+			};
+
+			partition@180000 {
+				label = "env2";
+				reg = <0x180000 0x80000>;
+			};
+
+			partition@200000 {
+				label = "firmware";
+				reg = <0x200000 0x80000>;
+			};
+
+			partition@280000 {
+				label = "dtb";
+				reg = <0x280000 0x80000>;
+			};
+
+			partition@300000 {
+				label = "kernel";
+				reg = <0x300000 0x500000>;
+			};
+
+			partition@800000 {
+				label = "rootfs";
+				reg = <0x800000 0xf800000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 3e54f149884..b8d3905915a 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -58,7 +58,7 @@
 			reg = <0x10000000 0x10000000>;
 			ranges;
 
-			wdog@10002000 {
+			wdog: wdog@10002000 {
 				compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
 				reg = <0x10002000 0x4000>;
 				interrupts = <27>;
@@ -113,7 +113,7 @@
 			i2c1: i2c@10012000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx27-i2c", "fsl,imx1-i2c";
+				compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
 				reg = <0x10012000 0x1000>;
 				interrupts = <12>;
 				status = "disabled";
@@ -205,7 +205,7 @@
 			i2c2: i2c@1001d000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx27-i2c", "fsl,imx1-i2c";
+				compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
 				reg = <0x1001d000 0x1000>;
 				interrupts = <1>;
 				status = "disabled";
@@ -218,7 +218,8 @@
 				status = "disabled";
 			};
 		};
-		nand@d8000000 {
+
+		nfc: nand@d8000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 
diff --git a/arch/arm/boot/dts/imx28-apf28.dts b/arch/arm/boot/dts/imx28-apf28.dts
new file mode 100644
index 00000000000..7eb075876c4
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-apf28.dts
@@ -0,0 +1,85 @@
+/*
+ * Copyright 2012 Armadeus Systems - <support@armadeus.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx28.dtsi"
+
+/ {
+	model = "Armadeus Systems APF28 module";
+	compatible = "armadeus,imx28-apf28", "fsl,imx28";
+
+	memory {
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			gpmi-nand@8000c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+				status = "okay";
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0 0x300000>;
+				};
+
+				partition@300000 {
+					label = "env";
+					reg = <0x300000 0x80000>;
+				};
+
+				partition@380000 {
+					label = "env2";
+					reg = <0x380000 0x80000>;
+				};
+
+				partition@400000 {
+					label = "dtb";
+					reg = <0x400000 0x80000>;
+				};
+
+				partition@480000 {
+					label = "splash";
+					reg = <0x480000 0x80000>;
+				};
+
+				partition@500000 {
+					label = "kernel";
+					reg = <0x500000 0x800000>;
+				};
+
+				partition@d00000 {
+					label = "rootfs";
+					reg = <0xd00000 0xf300000>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			phy-reset-gpios = <&gpio4 13 0>;
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts
new file mode 100644
index 00000000000..6d8865bfb4b
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-apf28dev.dts
@@ -0,0 +1,154 @@
+/*
+ * Copyright 2012 Armadeus Systems - <support@armadeus.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/* APF28Dev is a docking board for the APF28 SOM */
+/include/ "imx28-apf28.dts"
+
+/ {
+	model = "Armadeus Systems APF28Dev docking/development board";
+	compatible = "armadeus,imx28-apf28dev", "armadeus,imx28-apf28", "fsl,imx28";
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: ssp@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a
+					&mmc0_cd_cfg &mmc0_sck_cfg>;
+				bus-width = <4>;
+				status = "okay";
+			};
+
+			ssp2: ssp@80014000 {
+				compatible = "fsl,imx28-spi";
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi2_pins_a>;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_apf28dev>;
+
+				hog_pins_apf28dev: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x1103 /* MX28_PAD_LCD_D16__GPIO_1_16 */
+						0x1113 /* MX28_PAD_LCD_D17__GPIO_1_17 */
+						0x1123 /* MX28_PAD_LCD_D18__GPIO_1_18 */
+						0x1133 /* MX28_PAD_LCD_D19__GPIO_1_19 */
+						0x1143 /* MX28_PAD_LCD_D20__GPIO_1_20 */
+						0x1153 /* MX28_PAD_LCD_D21__GPIO_1_21 */
+						0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				lcdif_pins_apf28dev: lcdif-apf28dev@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
+						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
+						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
+						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_16bit_pins_a
+						&lcdif_pins_apf28dev>;
+				status = "okay";
+			};
+		};
+
+		apbx@80040000 {
+			lradc@80050000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@80058000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins_a>;
+				status = "okay";
+			};
+
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm3_pins_a &pwm4_pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+
+			usbphy1: usbphy@8007e000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			vbus-supply = <&reg_usb0_vbus>;
+			status = "okay";
+		};
+
+		usb1: usb@80090000 {
+			status = "okay";
+		};
+
+		mac1: ethernet@800f4000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac1_pins_a>;
+			phy-reset-gpios = <&gpio0 23 0>;
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_usb0_vbus: usb0_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 23 1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user {
+			label = "Heartbeat";
+			gpios = <&gpio0 21 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+
+		pwms = <&pwm 3 191000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts
index c03a577beca..1594694532b 100644
--- a/arch/arm/boot/dts/imx28-cfa10036.dts
+++ b/arch/arm/boot/dts/imx28-cfa10036.dts
@@ -22,6 +22,31 @@
 
 	apb@80000000 {
 		apbh@80000000 {
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_cfa10036>;
+
+				hog_pins_cfa10036: hog-10036@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x2073 /* MX28_PAD_SSP0_D7__GPIO_2_7 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				led_pins_cfa10036: leds-10036@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x3043 /* MX28_PAD_AUART1_RX__GPIO_3_4 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+			};
+
 			ssp0: ssp@80010000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
@@ -33,16 +58,37 @@
 		};
 
 		apbx@80040000 {
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm4_pins_a>;
+				status = "okay";
+			};
+
 			duart: serial@80074000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&duart_pins_b>;
 				status = "okay";
 			};
+
+			i2c0: i2c@80058000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins_b>;
+				status = "okay";
+
+				ssd1307: oled@3c {
+					compatible = "solomon,ssd1307fb-i2c";
+					reg = <0x3c>;
+					pwms = <&pwm 4 3000>;
+					reset-gpios = <&gpio2 7 0>;
+				};
+			};
 		};
 	};
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_cfa10036>;
 
 		power {
 			gpios = <&gpio3 4 1>;
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
index 05c892e931e..b222614ac9e 100644
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ b/arch/arm/boot/dts/imx28-cfa10049.dts
@@ -22,6 +22,22 @@
 	apb@80000000 {
 		apbh@80000000 {
 			pinctrl@80018000 {
+				pinctrl-names = "default", "default";
+				pinctrl-1 = <&hog_pins_cfa10049>;
+
+				hog_pins_cfa10049: hog-10049@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
+						0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */
+						0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */
+						0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
 				spi3_pins_cfa10049: spi3-cfa10049@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -29,6 +45,7 @@
 						0x01c1 /* MX28_PAD_GPMI_RESETN__SSP3_CMD */
 						0x0111 /* MX28_PAD_GPMI_CE1N__SSP3_D3 */
 						0x01a2 /* MX28_PAD_GPMI_ALE__SSP3_D4 */
+						0x01b2 /* MX28_PAD_GPMI_CLE__SSP3_D5 */
 					>;
 					fsl,drive-strength = <1>;
 					fsl,voltage = <1>;
@@ -60,6 +77,11 @@
 					spi-max-frequency = <100000>;
 				};
 
+				dac0: dh2228@2 {
+					compatible = "rohm,dh2228fv";
+					reg = <2>;
+					spi-max-frequency = <100000>;
+				};
 			};
 		};
 
@@ -96,4 +118,15 @@
 			gpio = <&gpio0 7 1>;
 		};
 	};
+
+	ahb@80080000 {
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			phy-reset-gpios = <&gpio2 21 0>;
+			phy-reset-duration = <100>;
+			status = "okay";
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index a0ad71ca3a4..2da316e0440 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -76,7 +76,6 @@
 						0x20c3 /* MX28_PAD_SSP1_SCK__GPIO_2_12 */
 						0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
 						0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
-						0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
 						0x3083 /* MX28_PAD_AUART2_RX__GPIO_3_8 */
 						0x3093 /* MX28_PAD_AUART2_TX__GPIO_3_9 */
 					>;
@@ -85,6 +84,16 @@
 					fsl,pull-up = <0>;
 				};
 
+				led_pin_gpio3_5: led_gpio3_5@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
 				gpmi_pins_evk: gpmi-nand-evk@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -288,6 +297,8 @@
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio3_5>;
 
 		user {
 			label = "Heartbeat";
diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts
new file mode 100644
index 00000000000..e6cde8aa7ff
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-sps1.dts
@@ -0,0 +1,169 @@
+/*
+ * Copyright (C) 2012 Marek Vasut <marex@denx.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx28.dtsi"
+
+/ {
+	model = "SchulerControl GmbH, SC SPS 1";
+	compatible = "schulercontrol,imx28-sps1", "fsl,imx28";
+
+	memory {
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog-gpios@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x0003 /* MX28_PAD_GPMI_D00__GPIO_0_0 */
+						0x0033 /* MX28_PAD_GPMI_D03__GPIO_0_3 */
+						0x0063 /* MX28_PAD_GPMI_D06__GPIO_0_6 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+			};
+
+			ssp0: ssp@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a>;
+				bus-width = <4>;
+				status = "okay";
+			};
+
+			ssp2: ssp@80014000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx28-spi";
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi2_pins_a>;
+				status = "okay";
+
+				flash: m25p80@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "everspin,mr25h256", "mr25h256";
+					spi-max-frequency = <40000000>;
+					reg = <0>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			i2c0: i2c@80058000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins_a>;
+				clock-frequency = <400000>;
+				status = "okay";
+
+				rtc: rtc@51 {
+					compatible = "nxp,pcf8563";
+					reg = <0x51>;
+				};
+
+				eeprom: eeprom@52 {
+					compatible = "atmel,24c64";
+					reg = <0x52>;
+					pagesize = <32>;
+				};
+			};
+
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+
+			auart0: serial@8006a000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_pins_a>;
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			vbus-supply = <&reg_usb0_vbus>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usbphy0_pins_b>;
+			status = "okay";
+		};
+
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			status = "okay";
+		};
+
+		mac1: ethernet@800f4000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac1_pins_a>;
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_usb0_vbus: usb0_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 9 0>;
+		};
+	};
+
+	leds {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "gpio-leds";
+		status = "okay";
+
+		led@1 {
+			label = "sps1-1:yellow:user";
+			gpios = <&gpio0 6 0>;
+			linux,default-trigger = "heartbeat";
+			reg = <0>;
+		};
+
+		led@2 {
+			label = "sps1-2:red:user";
+			gpios = <&gpio0 3 0>;
+			linux,default-trigger = "heartbeat";
+			reg = <1>;
+		};
+
+		led@3 {
+			label = "sps1-3:red:user";
+			gpios = <&gpio0 0 0>;
+			default-trigger = "heartbeat";
+			reg = <2>;
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 55c57ea6169..d7013f73f2e 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -492,6 +492,16 @@
 					fsl,pull-up = <0>;
 				};
 
+				pwm3_pins_a: pwm3@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x31c0 /* MX28_PAD_PWM3__PWM_3 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
 				pwm4_pins_a: pwm4@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -535,6 +545,31 @@
 					fsl,pull-up = <0>;
 				};
 
+				lcdif_16bit_pins_a: lcdif-16bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
+						0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
+						0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
+						0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
+						0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
+						0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
+						0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
+						0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
+						0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
+						0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
+						0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
+						0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
+						0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
+						0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
+						0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
+						0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
 				can0_pins_a: can0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 75d069fcf89..1fdee31b490 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -76,17 +76,18 @@
 				reg = <0x70000000 0x40000>;
 				ranges;
 
-				esdhc@70004000 { /* ESDHC1 */
+				esdhc1: esdhc@70004000 {
 					compatible = "fsl,imx51-esdhc";
 					reg = <0x70004000 0x4000>;
 					interrupts = <1>;
 					status = "disabled";
 				};
 
-				esdhc@70008000 { /* ESDHC2 */
+				esdhc2: esdhc@70008000 {
 					compatible = "fsl,imx51-esdhc";
 					reg = <0x70008000 0x4000>;
 					interrupts = <2>;
+					bus-width = <4>;
 					status = "disabled";
 				};
 
@@ -97,7 +98,7 @@
 					status = "disabled";
 				};
 
-				ecspi@70010000 { /* ECSPI1 */
+				ecspi1: ecspi@70010000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx51-ecspi";
@@ -115,43 +116,45 @@
 					status = "disabled";
 				};
 
-				esdhc@70020000 { /* ESDHC3 */
+				esdhc3: esdhc@70020000 {
 					compatible = "fsl,imx51-esdhc";
 					reg = <0x70020000 0x4000>;
 					interrupts = <3>;
+					bus-width = <4>;
 					status = "disabled";
 				};
 
-				esdhc@70024000 { /* ESDHC4 */
+				esdhc4: esdhc@70024000 {
 					compatible = "fsl,imx51-esdhc";
 					reg = <0x70024000 0x4000>;
 					interrupts = <4>;
+					bus-width = <4>;
 					status = "disabled";
 				};
 			};
 
-			usb@73f80000 {
+			usbotg: usb@73f80000 {
 				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
 				reg = <0x73f80000 0x0200>;
 				interrupts = <18>;
 				status = "disabled";
 			};
 
-			usb@73f80200 {
+			usbh1: usb@73f80200 {
 				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
 				reg = <0x73f80200 0x0200>;
 				interrupts = <14>;
 				status = "disabled";
 			};
 
-			usb@73f80400 {
+			usbh2: usb@73f80400 {
 				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
 				reg = <0x73f80400 0x0200>;
 				interrupts = <16>;
 				status = "disabled";
 			};
 
-			usb@73f80600 {
+			usbh3: usb@73f80600 {
 				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
 				reg = <0x73f80600 0x0200>;
 				interrupts = <17>;
@@ -198,20 +201,20 @@
 				#interrupt-cells = <2>;
 			};
 
-			wdog@73f98000 { /* WDOG1 */
+			wdog1: wdog@73f98000 {
 				compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
 				reg = <0x73f98000 0x4000>;
 				interrupts = <58>;
 			};
 
-			wdog@73f9c000 { /* WDOG2 */
+			wdog2: wdog@73f9c000 {
 				compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
 				reg = <0x73f9c000 0x4000>;
 				interrupts = <59>;
 				status = "disabled";
 			};
 
-			iomuxc@73fa8000 {
+			iomuxc: iomuxc@73fa8000 {
 				compatible = "fsl,imx51-iomuxc";
 				reg = <0x73fa8000 0x4000>;
 
@@ -349,7 +352,7 @@
 			reg = <0x80000000 0x10000000>;
 			ranges;
 
-			ecspi@83fac000 { /* ECSPI2 */
+			ecspi2: ecspi@83fac000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx51-ecspi";
@@ -358,14 +361,14 @@
 				status = "disabled";
 			};
 
-			sdma@83fb0000 {
+			sdma: sdma@83fb0000 {
 				compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
 				reg = <0x83fb0000 0x4000>;
 				interrupts = <6>;
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
 			};
 
-			cspi@83fc0000 {
+			cspi: cspi@83fc0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx51-cspi", "fsl,imx35-cspi";
@@ -374,19 +377,19 @@
 				status = "disabled";
 			};
 
-			i2c@83fc4000 { /* I2C2 */
+			i2c2: i2c@83fc4000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+				compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
 				reg = <0x83fc4000 0x4000>;
 				interrupts = <63>;
 				status = "disabled";
 			};
 
-			i2c@83fc8000 { /* I2C1 */
+			i2c1: i2c@83fc8000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+				compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
 				reg = <0x83fc8000 0x4000>;
 				interrupts = <62>;
 				status = "disabled";
@@ -401,13 +404,13 @@
 				status = "disabled";
 			};
 
-			audmux@83fd0000 {
+			audmux: audmux@83fd0000 {
 				compatible = "fsl,imx51-audmux", "fsl,imx31-audmux";
 				reg = <0x83fd0000 0x4000>;
 				status = "disabled";
 			};
 
-			nand@83fdb000 {
+			nfc: nand@83fdb000 {
 				compatible = "fsl,imx51-nand";
 				reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>;
 				interrupts = <8>;
@@ -423,7 +426,7 @@
 				status = "disabled";
 			};
 
-			ethernet@83fec000 {
+			fec: ethernet@83fec000 {
 				compatible = "fsl,imx51-fec", "fsl,imx27-fec";
 				reg = <0x83fec000 0x4000>;
 				interrupts = <87>;
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts
index 08948af86d1..b0075537195 100644
--- a/arch/arm/boot/dts/imx53-qsb.dts
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@@ -60,10 +60,17 @@
 							697  0x80000000	/* MX53_PAD_EIM_DA12__GPIO3_12 */
 							701  0x80000000	/* MX53_PAD_EIM_DA13__GPIO3_13 */
 							868  0x80000000	/* MX53_PAD_PATA_DA_0__GPIO7_6 */
+							1149 0x80000000 /* MX53_PAD_GPIO_16__GPIO7_11 */
+						>;
+					};
+
+					led_pin_gpio7_7: led_gpio7_7@0 {
+						fsl,pins = <
 							873  0x80000000	/* MX53_PAD_PATA_DA_1__GPIO7_7 */
 						>;
 					};
 				};
+
 			};
 
 			uart1: serial@53fbc000 {
@@ -100,76 +107,93 @@
 				pmic: dialog@48 {
 					compatible = "dlg,da9053-aa", "dlg,da9052";
 					reg = <0x48>;
+					interrupt-parent = <&gpio7>;
+					interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */
 
 					regulators {
-						buck0 {
+						buck1_reg: buck1 {
 							regulator-min-microvolt = <500000>;
 							regulator-max-microvolt = <2075000>;
+							regulator-always-on;
 						};
 
-						buck1 {
+						buck2_reg: buck2 {
 							regulator-min-microvolt = <500000>;
 							regulator-max-microvolt = <2075000>;
+							regulator-always-on;
 						};
 
-						buck2 {
+						buck3_reg: buck3 {
 							regulator-min-microvolt = <925000>;
 					                regulator-max-microvolt = <2500000>;
+							regulator-always-on;
 						};
 
-						buck3 {
+						buck4_reg: buck4 {
 							regulator-min-microvolt = <925000>;
 					                regulator-max-microvolt = <2500000>;
+							regulator-always-on;
 						};
 
-						ldo4 {
+						ldo1_reg: ldo1 {
 							regulator-min-microvolt = <600000>;
 							regulator-max-microvolt = <1800000>;
+							regulator-boot-on;
+							regulator-always-on;
 						};
 
-						ldo5 {
+						ldo2_reg: ldo2 {
+							regulator-min-microvolt = <600000>;
+							regulator-max-microvolt = <1800000>;
+							regulator-always-on;
+						};
+
+						ldo3_reg: ldo3 {
 							regulator-min-microvolt = <600000>;
 					                regulator-max-microvolt = <1800000>;
+							regulator-always-on;
 						};
 
-						ldo6 {
+						ldo4_reg: ldo4 {
 							regulator-min-microvolt = <1725000>;
 					                regulator-max-microvolt = <3300000>;
+							regulator-always-on;
 						};
 
-						ldo7 {
+						ldo5_reg: ldo5 {
 							regulator-min-microvolt = <1725000>;
 					                regulator-max-microvolt = <3300000>;
+							regulator-always-on;
 						};
 
-						ldo8 {
+						ldo6_reg: ldo6 {
 							regulator-min-microvolt = <1200000>;
 					                regulator-max-microvolt = <3600000>;
+							regulator-always-on;
 						};
 
-						ldo9 {
+						ldo7_reg: ldo7 {
 							regulator-min-microvolt = <1200000>;
 					                regulator-max-microvolt = <3600000>;
+							regulator-always-on;
 						};
 
-						ldo10 {
+						ldo8_reg: ldo8 {
 							regulator-min-microvolt = <1200000>;
 					                regulator-max-microvolt = <3600000>;
+							regulator-always-on;
 						};
 
-						ldo11 {
+						ldo9_reg: ldo9 {
 							regulator-min-microvolt = <1200000>;
 					                regulator-max-microvolt = <3600000>;
+							regulator-always-on;
 						};
 
-						ldo12 {
+						ldo10_reg: ldo10 {
 							regulator-min-microvolt = <1250000>;
 					                regulator-max-microvolt = <3650000>;
-						};
-
-						ldo13 {
-							regulator-min-microvolt = <1200000>;
-					                regulator-max-microvolt = <3600000>;
+							regulator-always-on;
 						};
 					};
 				};
@@ -216,6 +240,8 @@
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio7_7>;
 
 		user {
 			label = "Heartbeat";
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 76ebb1ad267..f45d4b1e21b 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -81,17 +81,19 @@
 				reg = <0x50000000 0x40000>;
 				ranges;
 
-				esdhc@50004000 { /* ESDHC1 */
+				esdhc1: esdhc@50004000 {
 					compatible = "fsl,imx53-esdhc";
 					reg = <0x50004000 0x4000>;
 					interrupts = <1>;
+					bus-width = <4>;
 					status = "disabled";
 				};
 
-				esdhc@50008000 { /* ESDHC2 */
+				esdhc2: esdhc@50008000 {
 					compatible = "fsl,imx53-esdhc";
 					reg = <0x50008000 0x4000>;
 					interrupts = <2>;
+					bus-width = <4>;
 					status = "disabled";
 				};
 
@@ -102,7 +104,7 @@
 					status = "disabled";
 				};
 
-				ecspi@50010000 { /* ECSPI1 */
+				ecspi1: ecspi@50010000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
@@ -120,43 +122,45 @@
 					status = "disabled";
 				};
 
-				esdhc@50020000 { /* ESDHC3 */
+				esdhc3: esdhc@50020000 {
 					compatible = "fsl,imx53-esdhc";
 					reg = <0x50020000 0x4000>;
 					interrupts = <3>;
+					bus-width = <4>;
 					status = "disabled";
 				};
 
-				esdhc@50024000 { /* ESDHC4 */
+				esdhc4: esdhc@50024000 {
 					compatible = "fsl,imx53-esdhc";
 					reg = <0x50024000 0x4000>;
 					interrupts = <4>;
+					bus-width = <4>;
 					status = "disabled";
 				};
 			};
 
-			usb@53f80000 {
+			usbotg: usb@53f80000 {
 				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
 				reg = <0x53f80000 0x0200>;
 				interrupts = <18>;
 				status = "disabled";
 			};
 
-			usb@53f80200 {
+			usbh1: usb@53f80200 {
 				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
 				reg = <0x53f80200 0x0200>;
 				interrupts = <14>;
 				status = "disabled";
 			};
 
-			usb@53f80400 {
+			usbh2: usb@53f80400 {
 				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
 				reg = <0x53f80400 0x0200>;
 				interrupts = <16>;
 				status = "disabled";
 			};
 
-			usb@53f80600 {
+			usbh3: usb@53f80600 {
 				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
 				reg = <0x53f80600 0x0200>;
 				interrupts = <17>;
@@ -203,20 +207,20 @@
 				#interrupt-cells = <2>;
 			};
 
-			wdog@53f98000 { /* WDOG1 */
+			wdog1: wdog@53f98000 {
 				compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
 				reg = <0x53f98000 0x4000>;
 				interrupts = <58>;
 			};
 
-			wdog@53f9c000 { /* WDOG2 */
+			wdog2: wdog@53f9c000 {
 				compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
 				reg = <0x53f9c000 0x4000>;
 				interrupts = <59>;
 				status = "disabled";
 			};
 
-			iomuxc@53fa8000 {
+			iomuxc: iomuxc@53fa8000 {
 				compatible = "fsl,imx53-iomuxc";
 				reg = <0x53fa8000 0x4000>;
 
@@ -316,6 +320,24 @@
 					};
 				};
 
+				can1 {
+					pinctrl_can1_1: can1grp-1 {
+						fsl,pins = <
+							847 0x80000000  /* MX53_PAD_PATA_INTRQ__CAN1_TXCAN */
+							853 0x80000000  /* MX53_PAD_PATA_DIOR__CAN1_RXCAN */
+						>;
+					};
+				};
+
+				can2 {
+					pinctrl_can2_1: can2grp-1 {
+						fsl,pins = <
+							67  0x80000000  /* MX53_PAD_KEY_COL4__CAN2_TXCAN */
+							74  0x80000000  /* MX53_PAD_KEY_ROW4__CAN2_RXCAN */
+						>;
+					};
+				};
+
 				i2c1 {
 					pinctrl_i2c1_1: i2c1grp-1 {
 						fsl,pins = <
@@ -334,6 +356,15 @@
 					};
 				};
 
+				i2c3 {
+					pinctrl_i2c3_1: i2c3grp-1 {
+						fsl,pins = <
+							1102 0xc0000000	/* MX53_PAD_GPIO_6__I2C3_SDA */
+							1130 0xc0000000	/* MX53_PAD_GPIO_5__I2C3_SCL */
+						>;
+					};
+				};
+
 				uart1 {
 					pinctrl_uart1_1: uart1grp-1 {
 						fsl,pins = <
@@ -369,6 +400,25 @@
 						>;
 					};
 				};
+
+				uart4 {
+					pinctrl_uart4_1: uart4grp-1 {
+						fsl,pins = <
+							11 0x1c5	/* MX53_PAD_KEY_COL0__UART4_TXD_MUX */
+							18 0x1c5	/* MX53_PAD_KEY_ROW0__UART4_RXD_MUX */
+						>;
+					};
+				};
+
+				uart5 {
+					pinctrl_uart5_1: uart5grp-1 {
+						fsl,pins = <
+							24 0x1c5	/* MX53_PAD_KEY_COL1__UART5_TXD_MUX */
+							31 0x1c5	/* MX53_PAD_KEY_ROW1__UART5_RXD_MUX */
+						>;
+					};
+				};
+
 			};
 
 			uart1: serial@53fbc000 {
@@ -429,10 +479,10 @@
 				#interrupt-cells = <2>;
 			};
 
-			i2c@53fec000 { /* I2C3 */
+			i2c3: i2c@53fec000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx53-i2c", "fsl,imx1-i2c";
+				compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
 				reg = <0x53fec000 0x4000>;
 				interrupts = <64>;
 				status = "disabled";
@@ -460,7 +510,7 @@
 				status = "disabled";
 			};
 
-			ecspi@63fac000 { /* ECSPI2 */
+			ecspi2: ecspi@63fac000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
@@ -469,14 +519,14 @@
 				status = "disabled";
 			};
 
-			sdma@63fb0000 {
+			sdma: sdma@63fb0000 {
 				compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
 				reg = <0x63fb0000 0x4000>;
 				interrupts = <6>;
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
 			};
 
-			cspi@63fc0000 {
+			cspi: cspi@63fc0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
@@ -485,19 +535,19 @@
 				status = "disabled";
 			};
 
-			i2c@63fc4000 { /* I2C2 */
+			i2c2: i2c@63fc4000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx53-i2c", "fsl,imx1-i2c";
+				compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
 				reg = <0x63fc4000 0x4000>;
 				interrupts = <63>;
 				status = "disabled";
 			};
 
-			i2c@63fc8000 { /* I2C1 */
+			i2c1: i2c@63fc8000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx53-i2c", "fsl,imx1-i2c";
+				compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
 				reg = <0x63fc8000 0x4000>;
 				interrupts = <62>;
 				status = "disabled";
@@ -512,13 +562,13 @@
 				status = "disabled";
 			};
 
-			audmux@63fd0000 {
+			audmux: audmux@63fd0000 {
 				compatible = "fsl,imx53-audmux", "fsl,imx31-audmux";
 				reg = <0x63fd0000 0x4000>;
 				status = "disabled";
 			};
 
-			nand@63fdb000 {
+			nfc: nand@63fdb000 {
 				compatible = "fsl,imx53-nand";
 				reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>;
 				interrupts = <8>;
@@ -534,7 +584,7 @@
 				status = "disabled";
 			};
 
-			ethernet@63fec000 {
+			fec: ethernet@63fec000 {
 				compatible = "fsl,imx53-fec", "fsl,imx25-fec";
 				reg = <0x63fec000 0x4000>;
 				interrupts = <87>;
diff --git a/arch/arm/boot/dts/imx6q-sabreauto.dts b/arch/arm/boot/dts/imx6q-sabreauto.dts
new file mode 100644
index 00000000000..826e4ad1477
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-sabreauto.dts
@@ -0,0 +1,64 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx6q.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad SABRE Automotive Board";
+	compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
+
+	memory {
+		reg = <0x10000000 0x80000000>;
+	};
+
+	soc {
+		aips-bus@02000000 { /* AIPS1 */
+			iomuxc@020e0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_hog>;
+
+				hog {
+					pinctrl_hog: hoggrp {
+						fsl,pins = <
+							1376 0x80000000	/* MX6Q_PAD_NANDF_CS2__GPIO_6_15 */
+							13   0x80000000	/* MX6Q_PAD_SD2_DAT2__GPIO_1_13 */
+						>;
+					};
+				};
+			};
+		};
+
+		aips-bus@02100000 { /* AIPS2 */
+			uart4: serial@021f0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart4_1>;
+				status = "okay";
+			};
+
+			ethernet@02188000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_enet_2>;
+				phy-mode = "rgmii";
+				status = "okay";
+			};
+
+			usdhc@02198000 { /* uSDHC3 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usdhc3_1>;
+				cd-gpios = <&gpio6 15 0>;
+				wp-gpios = <&gpio1 13 0>;
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts
index e596c28c214..a42402562b7 100644
--- a/arch/arm/boot/dts/imx6q-sabresd.dts
+++ b/arch/arm/boot/dts/imx6q-sabresd.dts
@@ -38,6 +38,8 @@
 				hog {
 					pinctrl_hog: hoggrp {
 						fsl,pins = <
+							1004 0x80000000 /* MX6Q_PAD_GPIO_4__GPIO_1_4 */
+							1012 0x80000000 /* MX6Q_PAD_GPIO_5__GPIO_1_5 */
 							1402 0x80000000	/* MX6Q_PAD_NANDF_D0__GPIO_2_0 */
 							1410 0x80000000	/* MX6Q_PAD_NANDF_D1__GPIO_2_1 */
 							1418 0x80000000	/* MX6Q_PAD_NANDF_D2__GPIO_2_2 */
@@ -73,4 +75,20 @@
 			};
 		};
 	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio1 4 0>;
+			linux,code = <115>; /* KEY_VOLUMEUP */
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio1 5 0>;
+			linux,code = <114>; /* KEY_VOLUMEDOWN */
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index f3990b04fec..6dfeaedef30 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -36,6 +36,14 @@
 			compatible = "arm,cortex-a9";
 			reg = <0>;
 			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				792000  1100000
+				396000  950000
+				198000  850000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			cpu0-supply = <&reg_cpu>;
 		};
 
 		cpu@1 {
@@ -100,7 +108,7 @@
 			clocks = <&clks 106>;
 		};
 
-		gpmi-nand@00112000 {
+		nfc: gpmi-nand@00112000 {
 			compatible = "fsl,imx6q-gpmi-nand";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -144,12 +152,12 @@
 				reg = <0x02000000 0x40000>;
 				ranges;
 
-				spdif@02004000 {
+				spdif: spdif@02004000 {
 					reg = <0x02004000 0x4000>;
 					interrupts = <0 52 0x04>;
 				};
 
-				ecspi@02008000 { /* eCSPI1 */
+				ecspi1: ecspi@02008000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -160,7 +168,7 @@
 					status = "disabled";
 				};
 
-				ecspi@0200c000 { /* eCSPI2 */
+				ecspi2: ecspi@0200c000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -171,7 +179,7 @@
 					status = "disabled";
 				};
 
-				ecspi@02010000 { /* eCSPI3 */
+				ecspi3: ecspi@02010000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -182,7 +190,7 @@
 					status = "disabled";
 				};
 
-				ecspi@02014000 { /* eCSPI4 */
+				ecspi4: ecspi@02014000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -193,7 +201,7 @@
 					status = "disabled";
 				};
 
-				ecspi@02018000 { /* eCSPI5 */
+				ecspi5: ecspi@02018000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -213,7 +221,7 @@
 					status = "disabled";
 				};
 
-				esai@02024000 {
+				esai: esai@02024000 {
 					reg = <0x02024000 0x4000>;
 					interrupts = <0 51 0x04>;
 				};
@@ -248,7 +256,7 @@
 					status = "disabled";
 				};
 
-				asrc@02034000 {
+				asrc: asrc@02034000 {
 					reg = <0x02034000 0x4000>;
 					interrupts = <0 50 0x04>;
 				};
@@ -258,7 +266,7 @@
 				};
 			};
 
-			vpu@02040000 {
+			vpu: vpu@02040000 {
 				reg = <0x02040000 0x3c000>;
 				interrupts = <0 3 0x04 0 12 0x04>;
 			};
@@ -267,37 +275,37 @@
 				reg = <0x0207c000 0x4000>;
 			};
 
-			pwm@02080000 { /* PWM1 */
+			pwm1: pwm@02080000 {
 				reg = <0x02080000 0x4000>;
 				interrupts = <0 83 0x04>;
 			};
 
-			pwm@02084000 { /* PWM2 */
+			pwm2: pwm@02084000 {
 				reg = <0x02084000 0x4000>;
 				interrupts = <0 84 0x04>;
 			};
 
-			pwm@02088000 { /* PWM3 */
+			pwm3: pwm@02088000 {
 				reg = <0x02088000 0x4000>;
 				interrupts = <0 85 0x04>;
 			};
 
-			pwm@0208c000 { /* PWM4 */
+			pwm4: pwm@0208c000 {
 				reg = <0x0208c000 0x4000>;
 				interrupts = <0 86 0x04>;
 			};
 
-			flexcan@02090000 { /* CAN1 */
+			can1: flexcan@02090000 {
 				reg = <0x02090000 0x4000>;
 				interrupts = <0 110 0x04>;
 			};
 
-			flexcan@02094000 { /* CAN2 */
+			can2: flexcan@02094000 {
 				reg = <0x02094000 0x4000>;
 				interrupts = <0 111 0x04>;
 			};
 
-			gpt@02098000 {
+			gpt: gpt@02098000 {
 				compatible = "fsl,imx6q-gpt";
 				reg = <0x02098000 0x4000>;
 				interrupts = <0 55 0x04>;
@@ -373,19 +381,19 @@
 				#interrupt-cells = <2>;
 			};
 
-			kpp@020b8000 {
+			kpp: kpp@020b8000 {
 				reg = <0x020b8000 0x4000>;
 				interrupts = <0 82 0x04>;
 			};
 
-			wdog@020bc000 { /* WDOG1 */
+			wdog1: wdog@020bc000 {
 				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
 				reg = <0x020bc000 0x4000>;
 				interrupts = <0 80 0x04>;
 				clocks = <&clks 0>;
 			};
 
-			wdog@020c0000 { /* WDOG2 */
+			wdog2: wdog@020c0000 {
 				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
 				reg = <0x020c0000 0x4000>;
 				interrupts = <0 81 0x04>;
@@ -447,7 +455,7 @@
 					anatop-max-voltage = <2750000>;
 				};
 
-				regulator-vddcore@140 {
+				reg_cpu: regulator-vddcore@140 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "cpu";
 					regulator-min-microvolt = <725000>;
@@ -505,27 +513,35 @@
 			};
 
 			snvs@020cc000 {
-				reg = <0x020cc000 0x4000>;
-				interrupts = <0 19 0x04 0 20 0x04>;
+				compatible = "fsl,sec-v4.0-mon", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x020cc000 0x4000>;
+
+				snvs-rtc-lp@34 {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					reg = <0x34 0x58>;
+					interrupts = <0 19 0x04 0 20 0x04>;
+				};
 			};
 
-			epit@020d0000 { /* EPIT1 */
+			epit1: epit@020d0000 { /* EPIT1 */
 				reg = <0x020d0000 0x4000>;
 				interrupts = <0 56 0x04>;
 			};
 
-			epit@020d4000 { /* EPIT2 */
+			epit2: epit@020d4000 { /* EPIT2 */
 				reg = <0x020d4000 0x4000>;
 				interrupts = <0 57 0x04>;
 			};
 
-			src@020d8000 {
+			src: src@020d8000 {
 				compatible = "fsl,imx6q-src";
 				reg = <0x020d8000 0x4000>;
 				interrupts = <0 91 0x04 0 96 0x04>;
 			};
 
-			gpc@020dc000 {
+			gpc: gpc@020dc000 {
 				compatible = "fsl,imx6q-gpc";
 				reg = <0x020dc000 0x4000>;
 				interrupts = <0 89 0x04 0 90 0x04>;
@@ -536,7 +552,7 @@
 				reg = <0x020e0000 0x38>;
 			};
 
-			iomuxc@020e0000 {
+			iomuxc: iomuxc@020e0000 {
 				compatible = "fsl,imx6q-iomuxc";
 				reg = <0x020e0000 0x4000>;
 
@@ -748,17 +764,17 @@
 				};
 			};
 
-			dcic@020e4000 { /* DCIC1 */
+			dcic1: dcic@020e4000 {
 				reg = <0x020e4000 0x4000>;
 				interrupts = <0 124 0x04>;
 			};
 
-			dcic@020e8000 { /* DCIC2 */
+			dcic2: dcic@020e8000 {
 				reg = <0x020e8000 0x4000>;
 				interrupts = <0 125 0x04>;
 			};
 
-			sdma@020ec000 {
+			sdma: sdma@020ec000 {
 				compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
 				reg = <0x020ec000 0x4000>;
 				interrupts = <0 2 0x04>;
@@ -784,7 +800,7 @@
 				reg = <0x0217c000 0x4000>;
 			};
 
-			usb@02184000 { /* USB OTG */
+			usbotg: usb@02184000 {
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184000 0x200>;
 				interrupts = <0 43 0x04>;
@@ -794,7 +810,7 @@
 				status = "disabled";
 			};
 
-			usb@02184200 { /* USB1 */
+			usbh1: usb@02184200 {
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184200 0x200>;
 				interrupts = <0 40 0x04>;
@@ -804,7 +820,7 @@
 				status = "disabled";
 			};
 
-			usb@02184400 { /* USB2 */
+			usbh2: usb@02184400 {
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184400 0x200>;
 				interrupts = <0 41 0x04>;
@@ -813,7 +829,7 @@
 				status = "disabled";
 			};
 
-			usb@02184600 { /* USB3 */
+			usbh3: usb@02184600 {
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184600 0x200>;
 				interrupts = <0 42 0x04>;
@@ -822,14 +838,14 @@
 				status = "disabled";
 			};
 
-			usbmisc: usbmisc@02184800 {
+			usbmisc: usbmisc: usbmisc@02184800 {
 				#index-cells = <1>;
 				compatible = "fsl,imx6q-usbmisc";
 				reg = <0x02184800 0x200>;
 				clocks = <&clks 162>;
 			};
 
-			ethernet@02188000 {
+			fec: ethernet@02188000 {
 				compatible = "fsl,imx6q-fec";
 				reg = <0x02188000 0x4000>;
 				interrupts = <0 118 0x04 0 119 0x04>;
@@ -843,66 +859,70 @@
 				interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>;
 			};
 
-			usdhc@02190000 { /* uSDHC1 */
+			usdhc1: usdhc@02190000 {
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x02190000 0x4000>;
 				interrupts = <0 22 0x04>;
 				clocks = <&clks 163>, <&clks 163>, <&clks 163>;
 				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
 				status = "disabled";
 			};
 
-			usdhc@02194000 { /* uSDHC2 */
+			usdhc2: usdhc@02194000 {
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x02194000 0x4000>;
 				interrupts = <0 23 0x04>;
 				clocks = <&clks 164>, <&clks 164>, <&clks 164>;
 				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
 				status = "disabled";
 			};
 
-			usdhc@02198000 { /* uSDHC3 */
+			usdhc3: usdhc@02198000 {
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x02198000 0x4000>;
 				interrupts = <0 24 0x04>;
 				clocks = <&clks 165>, <&clks 165>, <&clks 165>;
 				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
 				status = "disabled";
 			};
 
-			usdhc@0219c000 { /* uSDHC4 */
+			usdhc4: usdhc@0219c000 {
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x0219c000 0x4000>;
 				interrupts = <0 25 0x04>;
 				clocks = <&clks 166>, <&clks 166>, <&clks 166>;
 				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
 				status = "disabled";
 			};
 
-			i2c@021a0000 { /* I2C1 */
+			i2c1: i2c@021a0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
+				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
 				reg = <0x021a0000 0x4000>;
 				interrupts = <0 36 0x04>;
 				clocks = <&clks 125>;
 				status = "disabled";
 			};
 
-			i2c@021a4000 { /* I2C2 */
+			i2c2: i2c@021a4000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
+				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
 				reg = <0x021a4000 0x4000>;
 				interrupts = <0 37 0x04>;
 				clocks = <&clks 126>;
 				status = "disabled";
 			};
 
-			i2c@021a8000 { /* I2C3 */
+			i2c3: i2c@021a8000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
+				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
 				reg = <0x021a8000 0x4000>;
 				interrupts = <0 38 0x04>;
 				clocks = <&clks 127>;
@@ -913,12 +933,12 @@
 				reg = <0x021ac000 0x4000>;
 			};
 
-			mmdc@021b0000 { /* MMDC0 */
+			mmdc0: mmdc@021b0000 { /* MMDC0 */
 				compatible = "fsl,imx6q-mmdc";
 				reg = <0x021b0000 0x4000>;
 			};
 
-			mmdc@021b4000 { /* MMDC1 */
+			mmdc1: mmdc@021b4000 { /* MMDC1 */
 				reg = <0x021b4000 0x4000>;
 			};
 
@@ -946,7 +966,7 @@
 				interrupts = <0 109 0x04>;
 			};
 
-			audmux@021d8000 {
+			audmux: audmux@021d8000 {
 				compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
 				reg = <0x021d8000 0x4000>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts
index 61767757b50..c9c3fa34464 100644
--- a/arch/arm/boot/dts/integratorap.dts
+++ b/arch/arm/boot/dts/integratorap.dts
@@ -18,6 +18,11 @@
 		bootargs = "root=/dev/ram0 console=ttyAM0,38400n8 earlyprintk";
 	};
 
+	syscon {
+		/* AP system controller registers */
+		reg = <0x11000000 0x100>;
+	};
+
 	timer0: timer@13000000 {
 		compatible = "arm,integrator-timer";
 	};
diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts
index 2dd5e4e4848..8b119399025 100644
--- a/arch/arm/boot/dts/integratorcp.dts
+++ b/arch/arm/boot/dts/integratorcp.dts
@@ -18,6 +18,11 @@
 		bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk";
 	};
 
+	cpcon {
+		/* CP controller registers */
+		reg = <0xcb000000 0x100>;
+	};
+
 	timer0: timer@13000000 {
 		compatible = "arm,sp804", "arm,primecell";
 	};
diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi
new file mode 100644
index 00000000000..d6c9d65cbae
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-6281.dtsi
@@ -0,0 +1,44 @@
+/ {
+	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+			compatible = "marvell,88f6281-pinctrl";
+			reg = <0x10000 0x20>;
+
+			pmx_nand: pmx-nand {
+				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
+					       "mpp4", "mpp5", "mpp18",
+					       "mpp19";
+				marvell,function = "nand";
+			};
+			pmx_sata0: pmx-sata0 {
+				marvell,pins = "mpp5", "mpp21", "mpp23";
+				marvell,function = "sata0";
+			};
+			pmx_sata1: pmx-sata1 {
+				marvell,pins = "mpp4", "mpp20", "mpp22";
+				marvell,function = "sata1";
+			};
+			pmx_spi: pmx-spi {
+				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
+				marvell,function = "spi";
+			};
+			pmx_twsi0: pmx-twsi0 {
+				marvell,pins = "mpp8", "mpp9";
+				marvell,function = "twsi0";
+			};
+			pmx_uart0: pmx-uart0 {
+				marvell,pins = "mpp10", "mpp11";
+				marvell,function = "uart0";
+			};
+			pmx_uart1: pmx-uart1 {
+				marvell,pins = "mpp13", "mpp14";
+				marvell,function = "uart1";
+			};
+			pmx_sdio: pmx-sdio {
+				marvell,pins = "mpp12", "mpp13", "mpp14",
+					       "mpp15", "mpp16", "mpp17";
+				marvell,function = "sdio";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi
new file mode 100644
index 00000000000..9ae2004d567
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-6282.dtsi
@@ -0,0 +1,45 @@
+/ {
+	ocp@f1000000 {
+
+		pinctrl: pinctrl@10000 {
+			compatible = "marvell,88f6282-pinctrl";
+			reg = <0x10000 0x20>;
+
+			pmx_sata0: pmx-sata0 {
+				marvell,pins = "mpp5", "mpp21", "mpp23";
+				marvell,function = "sata0";
+			};
+			pmx_sata1: pmx-sata1 {
+				marvell,pins = "mpp4", "mpp20", "mpp22";
+				marvell,function = "sata1";
+			};
+			pmx_spi: pmx-spi {
+				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
+				marvell,function = "spi";
+			};
+			pmx_twsi0: pmx-twsi0 {
+				marvell,pins = "mpp8", "mpp9";
+				marvell,function = "twsi0";
+			};
+			pmx_uart0: pmx-uart0 {
+				marvell,pins = "mpp10", "mpp11";
+				marvell,function = "uart0";
+			};
+
+			pmx_uart1: pmx-uart1 {
+				marvell,pins = "mpp13", "mpp14";
+				marvell,function = "uart1";
+			};
+		};
+
+		i2c@11100 {
+			compatible = "marvell,mv64xxx-i2c";
+			reg = <0x11100 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <32>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi
new file mode 100644
index 00000000000..3271e4c8ea0
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi
@@ -0,0 +1,31 @@
+/ {
+	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+			compatible = "marvell,98dx4122-pinctrl";
+			reg = <0x10000 0x20>;
+
+			pmx_nand: pmx-nand {
+				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
+					       "mpp4", "mpp5", "mpp18",
+					       "mpp19";
+				marvell,function = "nand";
+			};
+			pmx_spi: pmx-spi {
+				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
+				marvell,function = "spi";
+			};
+			pmx_twsi0: pmx-twsi0 {
+				marvell,pins = "mpp8", "mpp9";
+				marvell,function = "twsi0";
+			};
+			pmx_uart0: pmx-uart0 {
+				marvell,pins = "mpp10", "mpp11";
+				marvell,function = "uart0";
+			};
+			pmx_uart1: pmx-uart1 {
+				marvell,pins = "mpp13", "mpp14";
+				marvell,function = "uart1";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
index 9b32d027282..6875ac00c17 100644
--- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi
+++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
@@ -1,4 +1,5 @@
 /include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
 
 / {
 	model = "D-Link DNS NASes (kirkwood-based)";
@@ -35,7 +36,116 @@
 				      6000 2>;
 	};
 
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio1 4 0>;
+	};
+
 	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+
+			pinctrl-0 = < &pmx_nand &pmx_uart1
+				      &pmx_sata0 &pmx_sata1
+				      &pmx_led_power
+				      &pmx_led_red_right_hdd
+				      &pmx_led_red_left_hdd
+				      &pmx_led_red_usb_325
+				      &pmx_button_power
+				      &pmx_led_red_usb_320
+				      &pmx_power_off &pmx_power_back_on
+				      &pmx_power_sata0 &pmx_power_sata1
+				      &pmx_present_sata0 &pmx_present_sata1
+				      &pmx_led_white_usb &pmx_fan_tacho
+				      &pmx_fan_high_speed &pmx_fan_low_speed
+				      &pmx_button_unmount &pmx_button_reset
+				      &pmx_temp_alarm >;
+			pinctrl-names = "default";
+
+			pmx_sata0: pmx-sata0 {
+				marvell,pins = "mpp20";
+				marvell,function = "sata1";
+			};
+			pmx_sata1: pmx-sata1 {
+				marvell,pins = "mpp21";
+				marvell,function = "sata0";
+			};
+			pmx_led_power: pmx-led-power {
+				marvell,pins = "mpp26";
+				marvell,function = "gpio";
+			};
+			pmx_led_red_right_hdd: pmx-led-red-right-hdd {
+				marvell,pins = "mpp27";
+				marvell,function = "gpio";
+			};
+			pmx_led_red_left_hdd: pmx-led-red-left-hdd {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+			pmx_led_red_usb_325: pmx-led-red-usb-325 {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+			pmx_button_power: pmx-button-power {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+			pmx_led_red_usb_320: pmx-led-red-usb-320 {
+				marvell,pins = "mpp35";
+				marvell,function = "gpio";
+			};
+			pmx_power_off: pmx-power-off {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_power_back_on: pmx-power-back-on {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			pmx_power_sata0: pmx-power-sata0 {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_power_sata1: pmx-power-sata1 {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+			pmx_present_sata0: pmx-present-sata0 {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_present_sata1: pmx-present-sata1 {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_led_white_usb: pmx-led-white-usb {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_fan_tacho: pmx-fan-tacho {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+			pmx_fan_high_speed: pmx-fan-high-speed {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+			pmx_fan_low_speed: pmx-fan-low-speed {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_button_unmount: pmx-button-unmount {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+			pmx_button_reset: pmx-button-reset {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+			pmx_temp_alarm: pmx-temp-alarm {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+		};
 		sata@80000 {
 			status = "okay";
 			nr-ports = <2>;
@@ -43,6 +153,7 @@
 
 		nand@3000000 {
 			status = "okay";
+			chip-delay = <35>;
 
 			partition@0 {
 				label = "u-boot";
@@ -76,4 +187,33 @@
 			};
 		};
 	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sata0_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 7 0>;
+		};
+		sata1_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "SATA1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 8 0>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts
index 08a582414b8..2e3dd34e21a 100644
--- a/arch/arm/boot/dts/kirkwood-dockstar.dts
+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 
 /include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
 
 / {
 	model = "Seagate FreeAgent Dockstar";
@@ -16,6 +17,25 @@
 	};
 
 	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+
+			pinctrl-0 = < &pmx_usb_power_enable
+				      &pmx_led_green &pmx_led_orange >;
+			pinctrl-names = "default";
+
+			pmx_usb_power_enable: pmx-usb-power-enable {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+			pmx_led_green: pmx-led-green {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_led_orange: pmx-led-orange {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+		};
 		serial@12000 {
 			clock-frequency = <200000000>;
 			status = "ok";
@@ -54,4 +74,21 @@
 			gpios = <&gpio1 15 1>;
 		};
 	};
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 29 0>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts
index 26e281fbf6b..f2d386c95b0 100644
--- a/arch/arm/boot/dts/kirkwood-dreamplug.dts
+++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 
 /include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
 
 / {
 	model = "Globalscale Technologies Dreamplug";
@@ -16,6 +17,26 @@
 	};
 
 	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+
+			pinctrl-0 = < &pmx_spi
+				      &pmx_led_bluetooth &pmx_led_wifi
+				      &pmx_led_wifi_ap >;
+			pinctrl-names = "default";
+
+			pmx_led_bluetooth: pmx-led-bluetooth {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+			pmx_led_wifi: pmx-led-wifi {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+			pmx_led_wifi_ap: pmx-led-wifi-ap {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+		};
 		serial@12000 {
 			clock-frequency = <200000000>;
 			status = "ok";
diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts
index 7c8238fbb6f..1b133e0c566 100644
--- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
+++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 
 /include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
 
 / {
 	model = "Seagate GoFlex Net";
@@ -16,6 +17,61 @@
 	};
 
 	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+
+			pinctrl-0 = < &pmx_usb_power_enable &pmx_led_orange
+				      &pmx_led_left_cap_0 &pmx_led_left_cap_1
+				      &pmx_led_left_cap_2 &pmx_led_left_cap_3
+				      &pmx_led_right_cap_0 &pmx_led_right_cap_1
+				      &pmx_led_right_cap_2 &pmx_led_right_cap_3
+				    >;
+			pinctrl-names = "default";
+
+			pmx_usb_power_enable: pmx-usb-power-enable {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+			pmx_led_right_cap_0: pmx-led_right_cap_0 {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+			pmx_led_right_cap_1: pmx-led_right_cap_1 {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_led_right_cap_2: pmx-led_right_cap_2 {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+			pmx_led_right_cap_3: pmx-led_right_cap_3 {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_led_left_cap_0: pmx-led_left_cap_0 {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_led_left_cap_1: pmx-led_left_cap_1 {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_led_left_cap_2: pmx-led_left_cap_2 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+			pmx_led_left_cap_3: pmx-led_left_cap_3 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+			pmx_led_green: pmx-led_green {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_led_orange: pmx-led_orange {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+		};
 		serial@12000 {
 			clock-frequency = <200000000>;
 			status = "ok";
@@ -96,4 +152,21 @@
 			gpios = <&gpio1 9 0>;
 		};
 	};
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 29 0>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts
index 66794ed75ff..71902da33d6 100644
--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 
 /include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
 
 / {
 	model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";
@@ -16,6 +17,39 @@
 	};
 
 	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+
+			pinctrl-0 = < &pmx_nand
+				      &pmx_led_os_red &pmx_power_off
+				      &pmx_led_os_green &pmx_led_usb_transfer
+				      &pmx_button_reset &pmx_button_usb_copy >;
+			pinctrl-names = "default";
+
+			pmx_led_os_red: pmx-led-os-red {
+				marvell,pins = "mpp22";
+				marvell,function = "gpio";
+			};
+			pmx_power_off: pmx-power-off {
+				marvell,pins = "mpp24";
+				marvell,function = "gpio";
+			};
+			pmx_led_os_green: pmx-led-os-green {
+				marvell,pins = "mpp25";
+				marvell,function = "gpio";
+			};
+			pmx_led_usb_transfer: pmx-led-usb-transfer {
+				marvell,pins = "mpp27";
+				marvell,function = "gpio";
+			};
+			pmx_button_reset: pmx-button-reset {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+			pmx_button_usb_copy: pmx-button-usb-copy {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+		};
 		serial@12000 {
 			clock-frequency = <200000000>;
 			status = "okay";
@@ -79,4 +113,10 @@
 			gpios = <&gpio0 27 0>;
 		};
 	};
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 24 0>;
+	};
+
+
 };
diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts
index d97cd9d4753..504f16be8b5 100644
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 
 /include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
 
 / {
 	model = "Iomega Iconnect";
@@ -18,6 +19,56 @@
 	};
 
 	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+
+			pinctrl-0 = < &pmx_gpio_12 &pmx_gpio_35
+				      &pmx_gpio_41 &pmx_gpio_42
+				      &pmx_gpio_43 &pmx_gpio_44
+				      &pmx_gpio_45 &pmx_gpio_46
+				      &pmx_gpio_47 &pmx_gpio_48 >;
+			pinctrl-names = "default";
+
+			pmx_gpio_12: pmx-gpio-12 {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+			pmx_gpio_35: pmx-gpio-35 {
+				marvell,pins = "mpp35";
+				marvell,function = "gpio";
+			};
+			pmx_gpio_41: pmx-gpio-41 {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_gpio_42: pmx-gpio-42 {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_gpio_43: pmx-gpio-43 {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_gpio_44: pmx-gpio-44 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+			pmx_gpio_45: pmx-gpio-45 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+			pmx_gpio_46: pmx-gpio-46 {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_gpio_47: pmx-gpio-47 {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+			pmx_gpio_48: pmx-gpio-48 {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+		};
 		i2c@11000 {
 			status = "okay";
 
diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
index 865aeec40a2..6cae4599c4b 100644
--- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 
 /include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
 
 / {
 	model = "Iomega StorCenter ix2-200";
@@ -16,6 +17,94 @@
 	};
 
 	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+
+			pinctrl-0 = < &pmx_button_reset &pmx_button_power
+				      &pmx_led_backup &pmx_led_power
+				      &pmx_button_otb &pmx_led_rebuild
+				      &pmx_led_health
+				      &pmx_led_sata_brt_ctrl_1
+				      &pmx_led_sata_brt_ctrl_2
+				      &pmx_led_backup_brt_ctrl_1
+				      &pmx_led_backup_brt_ctrl_2
+				      &pmx_led_power_brt_ctrl_1
+				      &pmx_led_power_brt_ctrl_2
+				      &pmx_led_health_brt_ctrl_1
+				      &pmx_led_health_brt_ctrl_2
+				      &pmx_led_rebuild_brt_ctrl_1
+				      &pmx_led_rebuild_brt_ctrl_2 >;
+			pinctrl-names = "default";
+
+			pmx_button_reset: pmx-button-reset {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+			pmx_button_power: pmx-button-power {
+				marvell,pins = "mpp14";
+				marvell,function = "gpio";
+			};
+			pmx_led_backup: pmx-led-backup {
+				marvell,pins = "mpp15";
+				marvell,function = "gpio";
+			};
+			pmx_led_power: pmx-led-power {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+			pmx_button_otb: pmx-button-otb {
+				marvell,pins = "mpp35";
+				marvell,function = "gpio";
+			};
+			pmx_led_rebuild: pmx-led-rebuild {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_led_health: pmx-led_health {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			pmx_led_sata_brt_ctrl_1: pmx-led-sata-brt-ctrl-1 {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+			pmx_led_sata_brt_ctrl_2: pmx-led-sata-brt-ctrl-2 {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_led_backup_brt_ctrl_1: pmx-led-backup-brt-ctrl-1 {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+			pmx_led_backup_brt_ctrl_2: pmx-led-backup-brt-ctrl-2 {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_led_power_brt_ctrl_1: pmx-led-power-brt-ctrl-1 {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_led_power_brt_ctrl_2: pmx-led-power-brt-ctrl-2 {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_led_health_brt_ctrl_1: pmx-led-health-brt-ctrl-1 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+			pmx_led_health_brt_ctrl_2: pmx-led-health-brt-ctrl-2 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+			pmx_led_rebuild_brt_ctrl_1: pmx-led-rebuild-brt-ctrl-1 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+			pmx_led_rebuild_brt_ctrl_2: pmx-led-rebuild-brt-ctrl-2 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+		};
 		i2c@11000 {
 			status = "okay";
 
diff --git a/arch/arm/boot/dts/kirkwood-is2.dts b/arch/arm/boot/dts/kirkwood-is2.dts
new file mode 100644
index 00000000000..0bdce0ad727
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-is2.dts
@@ -0,0 +1,30 @@
+/dts-v1/;
+
+/include/ "kirkwood-ns2-common.dtsi"
+
+/ {
+	model = "LaCie Internet Space v2";
+	compatible = "lacie,inetspace_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	ocp@f1000000 {
+		sata@80000 {
+			status = "okay";
+			nr-ports = <1>;
+		};
+	};
+
+	ns2-leds {
+		compatible = "lacie,ns2-leds";
+
+		blue-sata {
+			label = "ns2:blue:sata";
+			slow-gpio = <&gpio0 29 0>;
+			cmd-gpio = <&gpio0 30 0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
index 75bdb93fed2..8db3123ac80 100644
--- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
+++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 
 /include/ "kirkwood.dtsi"
+/include/ "kirkwood-98dx4122.dtsi"
 
 / {
 	model = "Keymile Kirkwood Reference Design";
@@ -16,6 +17,22 @@
 	};
 
 	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+
+			pinctrl-0 = < &pmx_nand &pmx_i2c_gpio_sda
+				&pmx_i2c_gpio_scl >;
+			pinctrl-names = "default";
+
+			pmx_i2c_gpio_sda: pmx-gpio-sda {
+				marvell,pins = "mpp8";
+				marvell,function = "gpio";
+			};
+			pmx_i2c_gpio_scl: pmx-gpio-scl {
+				marvell,pins = "mpp9";
+				marvell,function = "gpio";
+			};
+		};
+
 		serial@12000 {
 			clock-frequency = <200000000>;
 			status = "ok";
diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
index 8fea375c734..37d45c4f88f 100644
--- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi
+++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
@@ -1,4 +1,5 @@
 /include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
 
 / {
 	chosen {
@@ -6,6 +7,71 @@
 	};
 
 	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+
+			pinctrl-0 = < &pmx_power_hdd &pmx_usb_vbus
+				      &pmx_fan_low &pmx_fan_high
+				      &pmx_led_function_red &pmx_led_alarm
+				      &pmx_led_info &pmx_led_power
+				      &pmx_fan_lock &pmx_button_function
+				      &pmx_power_switch &pmx_power_auto_switch
+				      &pmx_led_function_blue >;
+			pinctrl-names = "default";
+
+			pmx_power_hdd: pmx-power-hdd {
+				marvell,pins = "mpp10";
+				marvell,function = "gpo";
+			};
+			pmx_usb_vbus: pmx-usb-vbus {
+				marvell,pins = "mpp11";
+				marvell,function = "gpio";
+			};
+			pmx_fan_high: pmx-fan-high {
+				marvell,pins = "mpp18";
+				marvell,function = "gpo";
+			};
+			pmx_fan_low: pmx-fan-low {
+				marvell,pins = "mpp19";
+				marvell,function = "gpo";
+			};
+			pmx_led_function_blue: pmx-led-function-blue {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_led_alarm: pmx-led-alarm {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			pmx_led_info: pmx-led-info {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+			pmx_led_power: pmx-led-power {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_fan_lock: pmx-fan-lock {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+			pmx_button_function: pmx-button-function {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_power_switch: pmx-power-switch {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_power_auto_switch: pmx-power-auto-switch {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_led_function_red: pmx-led-function_red {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+
+		};
 		sata@80000 {
 			status = "okay";
 			nr-ports = <1>;
@@ -94,4 +160,44 @@
 			gpios = <&gpio1 16 1>;
 		};
 	};
+
+	gpio_fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio0 19 1
+		         &gpio0 18 1>;
+		gpio-fan,speed-map = <0    3
+		                      1500 2
+		                      3250 1
+		                      5000 0>;
+		alarm-gpios = <&gpio1 8 0>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 11 0>;
+		};
+		hdd_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "HDD Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 10 0>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts
new file mode 100644
index 00000000000..262c6540376
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts
@@ -0,0 +1,178 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
+
+/ {
+	model = "MPL CEC4";
+	compatible = "mpl,cec4-10", "mpl,cec4", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+        memory {
+                device_type = "memory";
+                reg = <0x00000000 0x20000000>;
+        };
+
+        chosen {
+                bootargs = "console=ttyS0,115200n8 earlyprintk";
+        };
+
+	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+
+			pinctrl-0 = < &pmx_nand &pmx_uart0
+				      &pmx_led_health &pmx_sdio
+				      &pmx_sata0 &pmx_sata1
+				      &pmx_led_user1o
+				      &pmx_led_user1g &pmx_led_user0o
+				      &pmx_led_user0g &pmx_led_misc
+				      &pmx_sdio_cd
+				    >;
+			pinctrl-names = "default";
+
+			pmx_led_health: pmx-led-health {
+				marvell,pins = "mpp7";
+				marvell,function = "gpo";
+			};
+
+			pmx_sata1: pmx-sata1 {
+				marvell,pins = "mpp34";
+				marvell,function = "sata1";
+			};
+
+			pmx_sata0: pmx-sata0 {
+				marvell,pins = "mpp35";
+				marvell,function = "sata0";
+			};
+
+			pmx_led_user1o: pmx-led-user1o {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_user1g: pmx-led-user1g {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_user0o: pmx-led-user0o {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_user0g: pmx-led-user0g {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_misc: pmx-led-misc {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+
+			pmx_sdio_cd: pmx-sdio-cd {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+		};
+
+                i2c@11000 {
+                        status = "okay";
+
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+
+			eeprom@57 {
+				compatible = "atmel,24c02";
+				reg = <0x57>;
+			};
+
+                };
+
+                serial@12000 {
+                        clock-frequency = <200000000>;
+                        status = "ok";
+                };
+
+                nand@3000000 {
+                        status = "okay";
+
+                        partition@0 {
+                                label = "uboot";
+                                reg = <0x0000000 0x100000>;
+                        };
+
+                        partition@100000 {
+                                label = "env";
+                                reg = <0x100000 0x80000>;
+                        };
+
+                        partition@180000 {
+                                label = "fdt";
+                                reg = <0x180000 0x80000>;
+                        };
+
+                        partition@200000 {
+                                label = "kernel";
+                                reg = <0x200000 0x400000>;
+                        };
+
+                        partition@600000 {
+                                label = "rootfs";
+                                reg = <0x600000 0x1fa00000>;
+                        };
+                };
+
+		rtc@10300 {
+			status = "disabled";
+		};
+
+		sata@80000 {
+			nr-ports = <2>;
+			status = "okay";
+
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		health {
+			label = "status:green:health";
+			gpios = <&gpio0 7 1>;
+		};
+
+		user1o {
+			label = "user1:orange";
+			gpios = <&gpio1 8 1>;
+			default-state = "on";
+		};
+
+		user1g {
+			label = "user1:green";
+			gpios = <&gpio1 9 1>;
+			default-state = "on";
+		};
+
+		user0o {
+			label = "user0:orange";
+			gpios = <&gpio1 12 1>;
+			default-state = "on";
+		};
+
+		user0g {
+			label = "user0:green";
+			gpios = <&gpio1 13 1>;
+			default-state = "on";
+		};
+
+		misc {
+			label = "status:orange:misc";
+			gpios = <&gpio1 14 1>;
+			default-state = "on";
+		};
+
+	};
+};
+
diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
new file mode 100644
index 00000000000..9bc6785ad22
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
@@ -0,0 +1,63 @@
+/include/ "kirkwood.dtsi"
+
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			clock-frequency = <166666667>;
+			status = "okay";
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mx25l4005a";
+				reg = <0>;
+				spi-max-frequency = <20000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0x80000>;
+					label = "u-boot";
+				};
+			};
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			eeprom@50 {
+				compatible = "at,24c04";
+				pagesize = <16>;
+				reg = <0x50>;
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@1 {
+			label = "Power push button";
+			linux,code = <116>;
+			gpios = <&gpio1 0 0>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		red-fail {
+			label = "ns2:red:fail";
+			gpios = <&gpio0 12 0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-ns2.dts b/arch/arm/boot/dts/kirkwood-ns2.dts
new file mode 100644
index 00000000000..f2d36ecf36d
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ns2.dts
@@ -0,0 +1,30 @@
+/dts-v1/;
+
+/include/ "kirkwood-ns2-common.dtsi"
+
+/ {
+	model = "LaCie Network Space v2";
+	compatible = "lacie,netspace_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	ocp@f1000000 {
+		sata@80000 {
+			status = "okay";
+			nr-ports = <1>;
+		};
+	};
+
+	ns2-leds {
+		compatible = "lacie,ns2-leds";
+
+		blue-sata {
+			label = "ns2:blue:sata";
+			slow-gpio = <&gpio0 29 0>;
+			cmd-gpio = <&gpio0 30 0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-ns2lite.dts b/arch/arm/boot/dts/kirkwood-ns2lite.dts
new file mode 100644
index 00000000000..b02eb4ea1bb
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ns2lite.dts
@@ -0,0 +1,30 @@
+/dts-v1/;
+
+/include/ "kirkwood-ns2-common.dtsi"
+
+/ {
+	model = "LaCie Network Space Lite v2";
+	compatible = "lacie,netspace_lite_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	ocp@f1000000 {
+		sata@80000 {
+			status = "okay";
+			nr-ports = <1>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		blue-sata {
+			label = "ns2:blue:sata";
+			gpios = <&gpio0 30 1>;
+			linux,default-trigger = "default-on";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-ns2max.dts b/arch/arm/boot/dts/kirkwood-ns2max.dts
new file mode 100644
index 00000000000..bcec4d6cada
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ns2max.dts
@@ -0,0 +1,49 @@
+/dts-v1/;
+
+/include/ "kirkwood-ns2-common.dtsi"
+
+/ {
+	model = "LaCie Network Space Max v2";
+	compatible = "lacie,netspace_max_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	ocp@f1000000 {
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	gpio_fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio0 22 1
+			 &gpio0  7 1
+			 &gpio1  1 1
+			 &gpio0 23 1>;
+		gpio-fan,speed-map =
+			<   0  0
+			 1500 15
+			 1700 14
+			 1800 13
+			 2100 12
+			 3100 11
+			 3300 10
+			 4300  9
+			 5500  8>;
+		alarm-gpios = <&gpio0 25 1>;
+	};
+
+	ns2-leds {
+		compatible = "lacie,ns2-leds";
+
+		blue-sata {
+			label = "ns2:blue:sata";
+			slow-gpio = <&gpio0 29 0>;
+			cmd-gpio = <&gpio0 30 0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-ns2mini.dts b/arch/arm/boot/dts/kirkwood-ns2mini.dts
new file mode 100644
index 00000000000..b79f5eb2558
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ns2mini.dts
@@ -0,0 +1,49 @@
+/dts-v1/;
+
+/include/ "kirkwood-ns2-common.dtsi"
+
+/ {
+	model = "LaCie Network Space Mini v2";
+	compatible = "lacie,netspace_mini_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	ocp@f1000000 {
+		sata@80000 {
+			status = "okay";
+			nr-ports = <1>;
+		};
+	};
+
+	gpio_fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio0 22 1
+			 &gpio0  7 1
+			 &gpio1  1 1
+			 &gpio0 23 1>;
+		gpio-fan,speed-map =
+			<   0  0
+			 3000 15
+			 3180 14
+			 4140 13
+			 4570 12
+			 6760 11
+			 7140 10
+			 7980  9
+			 9200  8>;
+		alarm-gpios = <&gpio0 25 1>;
+	};
+
+	ns2-leds {
+		compatible = "lacie,ns2-leds";
+
+		blue-sata {
+			label = "ns2:blue:sata";
+			slow-gpio = <&gpio0 29 0>;
+			cmd-gpio = <&gpio0 30 0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts
new file mode 100644
index 00000000000..5509f965954
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-nsa310.dts
@@ -0,0 +1,144 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+	model = "ZyXEL NSA310";
+	compatible = "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	ocp@f1000000 {
+
+		serial@12000 {
+			clock-frequency = <200000000>;
+			status = "ok";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
+		i2c@11000 {
+			status = "okay";
+		};
+
+		nand@3000000 {
+			status = "okay";
+			chip-delay = <35>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x0000000 0x0100000>;
+				read-only;
+			};
+			partition@100000 {
+				label = "uboot_env";
+				reg = <0x0100000 0x0080000>;
+			};
+			partition@180000 {
+				label = "key_store";
+				reg = <0x0180000 0x0080000>;
+			};
+			partition@200000 {
+				label = "info";
+				reg = <0x0200000 0x0080000>;
+			};
+			partition@280000 {
+				label = "etc";
+				reg = <0x0280000 0x0a00000>;
+			};
+			partition@c80000 {
+				label = "kernel_1";
+				reg = <0x0c80000 0x0a00000>;
+			};
+			partition@1680000 {
+				label = "rootfs1";
+				reg = <0x1680000 0x2fc0000>;
+			};
+			partition@4640000 {
+				label = "kernel_2";
+				reg = <0x4640000 0x0a00000>;
+			};
+			partition@5040000 {
+				label = "rootfs2";
+				reg = <0x5040000 0x2fc0000>;
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@1 {
+			label = "Power Button";
+			linux,code = <116>;
+			gpios = <&gpio1 14 0>;
+		};
+		button@2 {
+			label = "Copy Button";
+			linux,code = <133>;
+			gpios = <&gpio1 5 1>;
+		};
+		button@3 {
+			label = "Reset Button";
+			linux,code = <0x198>;
+			gpios = <&gpio1 4 1>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		green-sys {
+			label = "nsa310:green:sys";
+			gpios = <&gpio0 28 0>;
+		};
+		red-sys {
+			label = "nsa310:red:sys";
+			gpios = <&gpio0 29 0>;
+		};
+		green-hdd {
+			label = "nsa310:green:hdd";
+			gpios = <&gpio1 9 0>;
+		};
+		red-hdd {
+			label = "nsa310:red:hdd";
+			gpios = <&gpio1 10 0>;
+		};
+		green-esata {
+			label = "nsa310:green:esata";
+			gpios = <&gpio0 12 0>;
+		};
+		red-esata {
+			label = "nsa310:red:esata";
+			gpios = <&gpio0 13 0>;
+		};
+		green-usb {
+			label = "nsa310:green:usb";
+			gpios = <&gpio0 15 0>;
+		};
+		red-usb {
+			label = "nsa310:red:usb";
+			gpios = <&gpio0 16 0>;
+		};
+		green-copy {
+			label = "nsa310:green:copy";
+			gpios = <&gpio1 7 0>;
+		};
+		red-copy {
+			label = "nsa310:red:copy";
+			gpios = <&gpio1 8 0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
new file mode 100644
index 00000000000..49d3d74d4d3
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
@@ -0,0 +1,98 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+/include/ "kirkwood-6282.dtsi"
+
+/ {
+	model = "Plat'Home OpenBlocksA6";
+	compatible = "plathome,openblocks-a6", "marvell,kirkwood-88f6283", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			clock-frequency = <200000000>;
+			status = "ok";
+		};
+
+		serial@12100 {
+			clock-frequency = <200000000>;
+			status = "ok";
+		};
+
+		nand@3000000 {
+			chip-delay = <25>;
+			status = "okay";
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x0 0x90000>;
+			};
+
+			partition@90000 {
+				label = "env";
+				reg = <0x90000 0x44000>;
+			};
+
+			partition@d4000 {
+				label = "test";
+				reg = <0xd4000 0x24000>;
+			};
+
+			partition@f4000 {
+				label = "conf";
+				reg = <0xf4000 0x400000>;
+			};
+
+			partition@4f4000 {
+				label = "linux";
+				reg = <0x4f4000 0x1d20000>;
+			};
+
+			partition@2214000 {
+				label = "user";
+				reg = <0x2214000 0x1dec000>;
+			};
+		};
+
+		sata@80000 {
+			nr-ports = <1>;
+			status = "okay";
+		};
+
+		i2c@11100 {
+			status = "okay";
+
+			s35390a: s35390a@30 {
+				compatible = "s35390a";
+				reg = <0x30>;
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-red {
+			label = "obsa6:red:stat";
+			gpios = <&gpio1 9 1>;
+		};
+
+		led-green {
+			label = "obsa6:green:stat";
+			gpios = <&gpio1 10 1>;
+		};
+
+		led-yellow {
+			label = "obsa6:yellow:stat";
+			gpios = <&gpio1 11 1>;
+		};
+        };
+};
diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts
new file mode 100644
index 00000000000..c0de5a7f660
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-topkick.dts
@@ -0,0 +1,85 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+	model = "Univeral Scientific Industrial Co. Topkick-1281P2";
+	compatible = "usi,topkick-1281P2", "usi,topkick", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			clock-frequency = <200000000>;
+			status = "ok";
+		};
+
+		nand@3000000 {
+			status = "okay";
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x180000>;
+			};
+
+			partition@180000 {
+				label = "u-boot env";
+				reg = <0x0180000 0x20000>;
+			};
+
+			partition@200000 {
+				label = "uImage";
+				reg = <0x0200000 0x600000>;
+			};
+
+			partition@800000 {
+				label = "uInitrd";
+				reg = <0x0800000 0x1000000>;
+			};
+
+			partition@1800000 {
+				label = "rootfs";
+				reg = <0x1800000 0xe800000>;
+			};
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <1>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		disk {
+			label = "topkick:yellow:disk";
+			gpios = <&gpio0 21 1>;
+			linux,default-trigger = "ide-disk";
+		};
+		system2 {
+			label = "topkick:red:system";
+			gpios = <&gpio1 5 1>;
+		};
+		system {
+			label = "topkick:blue:system";
+			gpios = <&gpio1 6 1>;
+			default-state = "on";
+		};
+		wifi {
+			label = "topkick:green:wifi";
+			gpios = <&gpio1 7 1>;
+		};
+		wifi2 {
+			label = "topkick:yellow:wifi";
+			gpios = <&gpio1 16 1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts
index ccbf3275780..8295c833887 100644
--- a/arch/arm/boot/dts/kirkwood-ts219-6281.dts
+++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts
@@ -1,8 +1,39 @@
 /dts-v1/;
 
 /include/ "kirkwood-ts219.dtsi"
+/include/ "kirkwood-6281.dtsi"
 
 / {
+	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+
+			pinctrl-0 = < &pmx_uart0 &pmx_uart1 &pmx_spi
+				      &pmx_twsi0 &pmx_sata0 &pmx_sata1
+				      &pmx_ram_size &pmx_reset_button
+				      &pmx_USB_copy_button &pmx_board_id>;
+			pinctrl-names = "default";
+
+			pmx_ram_size: pmx-ram-size {
+				/* RAM: 0: 256 MB, 1: 512 MB */
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_USB_copy_button: pmx-USB-copy-button {
+				marvell,pins = "mpp15";
+				marvell,function = "gpio";
+			};
+			pmx_reset_button: pmx-reset-button {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+			pmx_board_id: pmx-board-id {
+				/* 0: TS-11x, 1: TS-21x */
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+		};
+	};
+
 	gpio_keys {
 		compatible = "gpio-keys";
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts
index fbe9932161a..df3f95dfba3 100644
--- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts
+++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts
@@ -1,8 +1,39 @@
 /dts-v1/;
 
 /include/ "kirkwood-ts219.dtsi"
+/include/ "kirkwood-6282.dtsi"
 
 / {
+	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+
+			pinctrl-0 = < &pmx_uart0 &pmx_uart1 &pmx_spi
+				      &pmx_twsi0 &pmx_sata0 &pmx_sata1
+				      &pmx_ram_size &pmx_reset_button
+				      &pmx_USB_copy_button &pmx_board_id>;
+			pinctrl-names = "default";
+
+			pmx_ram_size: pmx-ram-size {
+				/* RAM: 0: 256 MB, 1: 512 MB */
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_reset_button: pmx-reset-button {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			pmx_USB_copy_button: pmx-USB-copy-button {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_board_id: pmx-board-id {
+				/* 0: TS-11x, 1: TS-21x */
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+		};
+	};
+
 	gpio_keys {
 		compatible = "gpio-keys";
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index 4e5b8154a5b..a990c30f0a2 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -4,6 +4,10 @@
 	compatible = "marvell,kirkwood";
 	interrupt-parent = <&intc>;
 
+	aliases {
+	       gpio0 = &gpio0;
+	       gpio1 = &gpio1;
+	};
 	intc: interrupt-controller {
 		compatible = "marvell,orion-intc", "marvell,intc";
 		interrupt-controller;
@@ -24,7 +28,8 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			reg = <0x10100 0x40>;
-			ngpio = <32>;
+			ngpios = <32>;
+			interrupt-controller;
 			interrupts = <35>, <36>, <37>, <38>;
 		};
 
@@ -33,7 +38,8 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			reg = <0x10140 0x40>;
-			ngpio = <18>;
+			ngpios = <18>;
+			interrupt-controller;
 			interrupts = <39>, <40>, <41>;
 		};
 
@@ -77,6 +83,13 @@
 			status = "okay";
 		};
 
+		ehci@50000 {
+			compatible = "marvell,orion-ehci";
+			reg = <0x50000 0x1000>;
+			interrupts = <19>;
+			status = "okay";
+		};
+
 		sata@80000 {
 			compatible = "marvell,orion-sata";
 			reg = <0x80000 0x5000>;
diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index e5ffe960dbf..1582f484a86 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -182,6 +182,13 @@
 				pnx,timeout = <0x64>;
 			};
 
+			mpwm: mpwm@400E8000 {
+				compatible = "nxp,lpc3220-motor-pwm";
+				reg = <0x400E8000 0x78>;
+				status = "disabled";
+				#pwm-cells = <2>;
+			};
+
 			i2cusb: i2c@31020300 {
 				compatible = "nxp,pnx-i2c";
 				reg = <0x31020300 0x100>;
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
index 581cb081cb0..761c4b69b25 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -12,6 +12,7 @@
 
 / {
 	compatible = "ti,omap2430", "ti,omap2420", "ti,omap2";
+	interrupt-parent = <&intc>;
 
 	aliases {
 		serial0 = &uart1;
@@ -65,5 +66,90 @@
 			ti,hwmods = "uart3";
 			clock-frequency = <48000000>;
 		};
+
+		timer2: timer@4802a000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4802a000 0x400>;
+			interrupts = <38>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@48078000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48078000 0x400>;
+			interrupts = <39>;
+			ti,hwmods = "timer3";
+		};
+
+		timer4: timer@4807a000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4807a000 0x400>;
+			interrupts = <40>;
+			ti,hwmods = "timer4";
+		};
+
+		timer5: timer@4807c000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4807c000 0x400>;
+			interrupts = <41>;
+			ti,hwmods = "timer5";
+			ti,timer-dsp;
+		};
+
+		timer6: timer@4807e000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4807e000 0x400>;
+			interrupts = <42>;
+			ti,hwmods = "timer6";
+			ti,timer-dsp;
+		};
+
+		timer7: timer@48080000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48080000 0x400>;
+			interrupts = <43>;
+			ti,hwmods = "timer7";
+			ti,timer-dsp;
+		};
+
+		timer8: timer@48082000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48082000 0x400>;
+			interrupts = <44>;
+			ti,hwmods = "timer8";
+			ti,timer-dsp;
+		};
+
+		timer9: timer@48084000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48084000 0x400>;
+			interrupts = <45>;
+			ti,hwmods = "timer9";
+			ti,timer-pwm;
+		};
+
+		timer10: timer@48086000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48086000 0x400>;
+			interrupts = <46>;
+			ti,hwmods = "timer10";
+			ti,timer-pwm;
+		};
+
+		timer11: timer@48088000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48088000 0x400>;
+			interrupts = <47>;
+			ti,hwmods = "timer11";
+			ti,timer-pwm;
+		};
+
+		timer12: timer@4808a000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4808a000 0x400>;
+			interrupts = <48>;
+			ti,hwmods = "timer12";
+			ti,timer-pwm;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi
index bfd76b4a0dd..af656090890 100644
--- a/arch/arm/boot/dts/omap2420.dtsi
+++ b/arch/arm/boot/dts/omap2420.dtsi
@@ -14,6 +14,12 @@
 	compatible = "ti,omap2420", "ti,omap2";
 
 	ocp {
+		counter32k: counter@48004000 {
+			compatible = "ti,omap-counter32k";
+			reg = <0x48004000 0x20>;
+			ti,hwmods = "counter_32k";
+		};
+
 		omap2420_pmx: pinmux@48000030 {
 			compatible = "ti,omap2420-padconf", "pinctrl-single";
 			reg = <0x48000030 0x0113>;
@@ -30,7 +36,6 @@
 			interrupts = <59>, /* TX interrupt */
 				     <60>; /* RX interrupt */
 			interrupt-names = "tx", "rx";
-			interrupt-parent = <&intc>;
 			ti,hwmods = "mcbsp1";
 		};
 
@@ -41,8 +46,15 @@
 			interrupts = <62>, /* TX interrupt */
 				     <63>; /* RX interrupt */
 			interrupt-names = "tx", "rx";
-			interrupt-parent = <&intc>;
 			ti,hwmods = "mcbsp2";
 		};
+
+		timer1: timer@48028000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48028000 0x400>;
+			interrupts = <37>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index 4565d9750f4..c3924457c9b 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -14,6 +14,12 @@
 	compatible = "ti,omap2430", "ti,omap2";
 
 	ocp {
+		counter32k: counter@49020000 {
+			compatible = "ti,omap-counter32k";
+			reg = <0x49020000 0x20>;
+			ti,hwmods = "counter_32k";
+		};
+
 		omap2430_pmx: pinmux@49002030 {
 			compatible = "ti,omap2430-padconf", "pinctrl-single";
 			reg = <0x49002030 0x0154>;
@@ -32,7 +38,6 @@
 				     <60>, /* RX interrupt */
 				     <61>; /* RX overflow interrupt */
 			interrupt-names = "common", "tx", "rx", "rx_overflow";
-			interrupt-parent = <&intc>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp1";
 		};
@@ -45,7 +50,6 @@
 				     <62>, /* TX interrupt */
 				     <63>; /* RX interrupt */
 			interrupt-names = "common", "tx", "rx";
-			interrupt-parent = <&intc>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp2";
 		};
@@ -58,7 +62,6 @@
 				     <89>, /* TX interrupt */
 				     <90>; /* RX interrupt */
 			interrupt-names = "common", "tx", "rx";
-			interrupt-parent = <&intc>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp3";
 		};
@@ -71,7 +74,6 @@
 				     <54>, /* TX interrupt */
 				     <55>; /* RX interrupt */
 			interrupt-names = "common", "tx", "rx";
-			interrupt-parent = <&intc>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp4";
 		};
@@ -84,9 +86,16 @@
 				     <81>, /* TX interrupt */
 				     <82>; /* RX interrupt */
 			interrupt-names = "common", "tx", "rx";
-			interrupt-parent = <&intc>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp5";
 		};
+
+		timer1: timer@49018000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x49018000 0x400>;
+			interrupts = <37>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index c38cf76df81..3705a81c1fc 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -55,12 +55,6 @@
 		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
 		interrupt-parent = <&intc>;
 
-		vsim: regulator-vsim {
-			compatible = "ti,twl4030-vsim";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3000000>;
-		};
-
 		twl_audio: audio {
 			compatible = "ti,twl4030-audio";
 			codec {
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
new file mode 100644
index 00000000000..f624dc85d44
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -0,0 +1,67 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap3.dtsi"
+
+/ {
+	model = "TI OMAP3 BeagleBoard";
+	compatible = "ti,omap3-beagle", "ti,omap3";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pmu_stat {
+			label = "beagleboard::pmu_stat";
+			gpios = <&twl_gpio 19 0>; /* LEDB */
+		};
+
+		heartbeat {
+			label = "beagleboard::usr0";
+			gpios = <&gpio5 22 0>; /* 150 -> D6 LED */
+			linux,default-trigger = "heartbeat";
+		};
+
+		mmc {
+			label = "beagleboard::usr1";
+			gpios = <&gpio5 21 0>; /* 149 -> D7 LED */
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+	};
+};
+
+/include/ "twl4030.dtsi"
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	vmmc_aux-supply = <&vsim>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 696e929d030..1acc26148ff 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -12,6 +12,7 @@
 
 / {
 	compatible = "ti,omap3430", "ti,omap3";
+	interrupt-parent = <&intc>;
 
 	aliases {
 		serial0 = &uart1;
@@ -60,6 +61,12 @@
 		ranges;
 		ti,hwmods = "l3_main";
 
+		counter32k: counter@48320000 {
+			compatible = "ti,omap-counter32k";
+			reg = <0x48320000 0x20>;
+			ti,hwmods = "counter_32k";
+		};
+
 		intc: interrupt-controller@48200000 {
 			compatible = "ti,omap2-intc";
 			interrupt-controller;
@@ -240,7 +247,6 @@
 				     <59>, /* TX interrupt */
 				     <60>; /* RX interrupt */
 			interrupt-names = "common", "tx", "rx";
-			interrupt-parent = <&intc>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp1";
 		};
@@ -255,7 +261,6 @@
 				     <63>, /* RX interrupt */
 				     <4>;  /* Sidetone */
 			interrupt-names = "common", "tx", "rx", "sidetone";
-			interrupt-parent = <&intc>;
 			ti,buffer-size = <1280>;
 			ti,hwmods = "mcbsp2", "mcbsp2_sidetone";
 		};
@@ -270,7 +275,6 @@
 				     <90>, /* RX interrupt */
 				     <5>;  /* Sidetone */
 			interrupt-names = "common", "tx", "rx", "sidetone";
-			interrupt-parent = <&intc>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp3", "mcbsp3_sidetone";
 		};
@@ -283,7 +287,6 @@
 				     <54>, /* TX interrupt */
 				     <55>; /* RX interrupt */
 			interrupt-names = "common", "tx", "rx";
-			interrupt-parent = <&intc>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp4";
 		};
@@ -296,9 +299,103 @@
 				     <81>, /* TX interrupt */
 				     <82>; /* RX interrupt */
 			interrupt-names = "common", "tx", "rx";
-			interrupt-parent = <&intc>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp5";
 		};
+
+		timer1: timer@48318000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48318000 0x400>;
+			interrupts = <37>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
+
+		timer2: timer@49032000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x49032000 0x400>;
+			interrupts = <38>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@49034000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x49034000 0x400>;
+			interrupts = <39>;
+			ti,hwmods = "timer3";
+		};
+
+		timer4: timer@49036000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x49036000 0x400>;
+			interrupts = <40>;
+			ti,hwmods = "timer4";
+		};
+
+		timer5: timer@49038000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x49038000 0x400>;
+			interrupts = <41>;
+			ti,hwmods = "timer5";
+			ti,timer-dsp;
+		};
+
+		timer6: timer@4903a000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4903a000 0x400>;
+			interrupts = <42>;
+			ti,hwmods = "timer6";
+			ti,timer-dsp;
+		};
+
+		timer7: timer@4903c000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4903c000 0x400>;
+			interrupts = <43>;
+			ti,hwmods = "timer7";
+			ti,timer-dsp;
+		};
+
+		timer8: timer@4903e000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4903e000 0x400>;
+			interrupts = <44>;
+			ti,hwmods = "timer8";
+			ti,timer-pwm;
+			ti,timer-dsp;
+		};
+
+		timer9: timer@49040000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x49040000 0x400>;
+			interrupts = <45>;
+			ti,hwmods = "timer9";
+			ti,timer-pwm;
+		};
+
+		timer10: timer@48086000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48086000 0x400>;
+			interrupts = <46>;
+			ti,hwmods = "timer10";
+			ti,timer-pwm;
+		};
+
+		timer11: timer@48088000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48088000 0x400>;
+			interrupts = <47>;
+			ti,hwmods = "timer11";
+			ti,timer-pwm;
+		};
+
+		timer12: timer@48304000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48304000 0x400>;
+			interrupts = <95>;
+			ti,hwmods = "timer12";
+			ti,timer-alwon;
+			ti,timer-secure;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/omap4-panda-a4.dts b/arch/arm/boot/dts/omap4-panda-a4.dts
new file mode 100644
index 00000000000..75466d2abfb
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-panda-a4.dts
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/include/ "omap4-panda.dts"
+
+/* Pandaboard Rev A4+ have external pullups on SCL & SDA */
+&dss_hdmi_pins {
+	pinctrl-single,pins = <
+		0x5a 0x118	/* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
+		0x5c 0x100	/* hdmi_scl.hdmi_scl INPUT | MODE 0 */
+		0x5e 0x100	/* hdmi_sda.hdmi_sda INPUT | MODE 0 */
+		>;
+};
diff --git a/arch/arm/boot/dts/omap4-pandaES.dts b/arch/arm/boot/dts/omap4-panda-es.dts
index d4ba43a48d9..73bc1a67e44 100644
--- a/arch/arm/boot/dts/omap4-pandaES.dts
+++ b/arch/arm/boot/dts/omap4-panda-es.dts
@@ -22,3 +22,12 @@
 		"AFML", "Line In",
 		"AFMR", "Line In";
 };
+
+/* PandaboardES has external pullups on SCL & SDA */
+&dss_hdmi_pins {
+	pinctrl-single,pins = <
+		0x5a 0x118	/* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
+		0x5c 0x100	/* hdmi_scl.hdmi_scl INPUT | MODE 0 */
+		0x5e 0x100	/* hdmi_sda.hdmi_sda INPUT | MODE 0 */
+		>;
+};
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
index e8f927cbb37..4122efe31cf 100644
--- a/arch/arm/boot/dts/omap4-panda.dts
+++ b/arch/arm/boot/dts/omap4-panda.dts
@@ -65,6 +65,8 @@
 			&twl6040_pins
 			&mcpdm_pins
 			&mcbsp1_pins
+			&dss_hdmi_pins
+			&tpd12s015_pins
 	>;
 
 	twl6040_pins: pinmux_twl6040_pins {
@@ -92,6 +94,22 @@
 			0xc4 0x100	/* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */
 		>;
 	};
+
+	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+		pinctrl-single,pins = <
+			0x5a 0x118	/* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
+			0x5c 0x118	/* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */
+			0x5e 0x118	/* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */
+		>;
+	};
+
+	tpd12s015_pins: pinmux_tpd12s015_pins {
+		pinctrl-single,pins = <
+			0x22 0x3	/* gpmc_a17.gpio_41 OUTPUT | MODE3 */
+			0x48 0x3	/* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */
+			0x58 0x10b	/* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */
+		>;
+	};
 };
 
 &i2c1 {
@@ -184,3 +202,7 @@
 &dmic {
 	status = "disabled";
 };
+
+&twl_usb_comparator {
+	usb-supply = <&vusb>;
+};
diff --git a/arch/arm/boot/dts/omap4-sdp-es23plus.dts b/arch/arm/boot/dts/omap4-sdp-es23plus.dts
new file mode 100644
index 00000000000..b4a40ffbce3
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-sdp-es23plus.dts
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/include/ "omap4-sdp.dts"
+
+/* SDP boards with 4430 ES2.3+ or 4460 have external pullups on SCL & SDA */
+&dss_hdmi_pins {
+	pinctrl-single,pins = <
+		0x5a 0x118	/* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
+		0x5c 0x100	/* hdmi_scl.hdmi_scl INPUT | MODE 0 */
+		0x5e 0x100	/* hdmi_sda.hdmi_sda INPUT | MODE 0 */
+		>;
+};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 5b7e04fbff5..43e5258a937 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -124,6 +124,8 @@
 			&dmic_pins
 			&mcbsp1_pins
 			&mcbsp2_pins
+			&dss_hdmi_pins
+			&tpd12s015_pins
 	>;
 
 	uart2_pins: pinmux_uart2_pins {
@@ -194,6 +196,22 @@
 			0xbc 0x100	/* abe_mcbsp2_fsx.abe_mcbsp2_fsx INPUT | MODE0 */
 		>;
 	};
+
+	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+		pinctrl-single,pins = <
+			0x5a 0x118	/* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
+			0x5c 0x118	/* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */
+			0x5e 0x118	/* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */
+		>;
+	};
+
+	tpd12s015_pins: pinmux_tpd12s015_pins {
+		pinctrl-single,pins = <
+			0x22 0x3	/* gpmc_a17.gpio_41 OUTPUT | MODE3 */
+			0x48 0x3	/* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */
+			0x58 0x10b	/* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */
+		>;
+	};
 };
 
 &i2c1 {
@@ -406,3 +424,7 @@
 &mcbsp3 {
 	status = "disabled";
 };
+
+&twl_usb_comparator {
+	usb-supply = <&vusb>;
+};
diff --git a/arch/arm/boot/dts/omap4-var_som.dts b/arch/arm/boot/dts/omap4-var-som.dts
index 6601e6af609..6601e6af609 100644
--- a/arch/arm/boot/dts/omap4-var_som.dts
+++ b/arch/arm/boot/dts/omap4-var-som.dts
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 3883f94fdbd..739bb79e410 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -95,6 +95,12 @@
 		ranges;
 		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
 
+		counter32k: counter@4a304000 {
+			compatible = "ti,omap-counter32k";
+			reg = <0x4a304000 0x20>;
+			ti,hwmods = "counter_32k";
+		};
+
 		omap4_pmx_core: pinmux@4a100040 {
 			compatible = "ti,omap4-padconf", "pinctrl-single";
 			reg = <0x4a100040 0x0196>;
@@ -340,7 +346,6 @@
 			      <0x49032000 0x7f>; /* L3 Interconnect */
 			reg-names = "mpu", "dma";
 			interrupts = <0 112 0x4>;
-			interrupt-parent = <&gic>;
 			ti,hwmods = "mcpdm";
 		};
 
@@ -350,7 +355,6 @@
 			      <0x4902e000 0x7f>; /* L3 Interconnect */
 			reg-names = "mpu", "dma";
 			interrupts = <0 114 0x4>;
-			interrupt-parent = <&gic>;
 			ti,hwmods = "dmic";
 		};
 
@@ -361,7 +365,6 @@
 			reg-names = "mpu", "dma";
 			interrupts = <0 17 0x4>;
 			interrupt-names = "common";
-			interrupt-parent = <&gic>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp1";
 		};
@@ -373,7 +376,6 @@
 			reg-names = "mpu", "dma";
 			interrupts = <0 22 0x4>;
 			interrupt-names = "common";
-			interrupt-parent = <&gic>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp2";
 		};
@@ -385,7 +387,6 @@
 			reg-names = "mpu", "dma";
 			interrupts = <0 23 0x4>;
 			interrupt-names = "common";
-			interrupt-parent = <&gic>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp3";
 		};
@@ -396,7 +397,6 @@
 			reg-names = "mpu";
 			interrupts = <0 16 0x4>;
 			interrupt-names = "common";
-			interrupt-parent = <&gic>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp4";
 		};
@@ -431,12 +431,103 @@
 			hw-caps-temp-alert;
 		};
 
-		ocp2scp {
+		ocp2scp@4a0ad000 {
 			compatible = "ti,omap-ocp2scp";
+			reg = <0x4a0ad000 0x1f>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
 			ti,hwmods = "ocp2scp_usb_phy";
 		};
+
+		timer1: timer@4a318000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4a318000 0x80>;
+			interrupts = <0 37 0x4>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
+
+		timer2: timer@48032000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48032000 0x80>;
+			interrupts = <0 38 0x4>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@48034000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48034000 0x80>;
+			interrupts = <0 39 0x4>;
+			ti,hwmods = "timer3";
+		};
+
+		timer4: timer@48036000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48036000 0x80>;
+			interrupts = <0 40 0x4>;
+			ti,hwmods = "timer4";
+		};
+
+		timer5: timer@40138000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x40138000 0x80>,
+			      <0x49038000 0x80>;
+			interrupts = <0 41 0x4>;
+			ti,hwmods = "timer5";
+			ti,timer-dsp;
+		};
+
+		timer6: timer@4013a000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4013a000 0x80>,
+			      <0x4903a000 0x80>;
+			interrupts = <0 42 0x4>;
+			ti,hwmods = "timer6";
+			ti,timer-dsp;
+		};
+
+		timer7: timer@4013c000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4013c000 0x80>,
+			      <0x4903c000 0x80>;
+			interrupts = <0 43 0x4>;
+			ti,hwmods = "timer7";
+			ti,timer-dsp;
+		};
+
+		timer8: timer@4013e000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4013e000 0x80>,
+			      <0x4903e000 0x80>;
+			interrupts = <0 44 0x4>;
+			ti,hwmods = "timer8";
+			ti,timer-pwm;
+			ti,timer-dsp;
+		};
+
+		timer9: timer@4803e000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4803e000 0x80>;
+			interrupts = <0 45 0x4>;
+			ti,hwmods = "timer9";
+			ti,timer-pwm;
+		};
+
+		timer10: timer@48086000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48086000 0x80>;
+			interrupts = <0 46 0x4>;
+			ti,hwmods = "timer10";
+			ti,timer-pwm;
+		};
+
+		timer11: timer@48088000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48088000 0x80>;
+			interrupts = <0 47 0x4>;
+			ti,hwmods = "timer11";
+			ti,timer-pwm;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts
index c663eba7316..8722c15bbba 100644
--- a/arch/arm/boot/dts/omap5-evm.dts
+++ b/arch/arm/boot/dts/omap5-evm.dts
@@ -8,6 +8,7 @@
 /dts-v1/;
 
 /include/ "omap5.dtsi"
+/include/ "samsung_k3pe0e000b.dtsi"
 
 / {
 	model = "TI OMAP5 EVM board";
@@ -15,7 +16,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x80000000 0x40000000>; /* 1 GB */
+		reg = <0x80000000 0x80000000>; /* 2 GB */
 	};
 
 	vmmcsd_fixed: fixedregulator-mmcsd {
@@ -140,3 +141,13 @@
 &mcbsp3 {
 	status = "disabled";
 };
+
+&emif1 {
+	cs1-used;
+	device-handle = <&samsung_K3PE0E000B>;
+};
+
+&emif2 {
+	cs1-used;
+	device-handle = <&samsung_K3PE0E000B>;
+};
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 42c78beb4fd..790bb2a4b34 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -77,6 +77,12 @@
 		ranges;
 		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
 
+		counter32k: counter@4ae04000 {
+			compatible = "ti,omap-counter32k";
+			reg = <0x4ae04000 0x40>;
+			ti,hwmods = "counter_32k";
+		};
+
 		omap5_pmx_core: pinmux@4a002840 {
 			compatible = "ti,omap4-padconf", "pinctrl-single";
 			reg = <0x4a002840 0x01b6>;
@@ -104,6 +110,8 @@
 
 		gpio1: gpio@4ae10000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x4ae10000 0x200>;
+			interrupts = <0 29 0x4>;
 			ti,hwmods = "gpio1";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -113,6 +121,8 @@
 
 		gpio2: gpio@48055000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x48055000 0x200>;
+			interrupts = <0 30 0x4>;
 			ti,hwmods = "gpio2";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -122,6 +132,8 @@
 
 		gpio3: gpio@48057000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x48057000 0x200>;
+			interrupts = <0 31 0x4>;
 			ti,hwmods = "gpio3";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -131,6 +143,8 @@
 
 		gpio4: gpio@48059000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x48059000 0x200>;
+			interrupts = <0 32 0x4>;
 			ti,hwmods = "gpio4";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -140,6 +154,8 @@
 
 		gpio5: gpio@4805b000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x4805b000 0x200>;
+			interrupts = <0 33 0x4>;
 			ti,hwmods = "gpio5";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -149,6 +165,8 @@
 
 		gpio6: gpio@4805d000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x4805d000 0x200>;
+			interrupts = <0 34 0x4>;
 			ti,hwmods = "gpio6";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -158,6 +176,8 @@
 
 		gpio7: gpio@48051000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x48051000 0x200>;
+			interrupts = <0 35 0x4>;
 			ti,hwmods = "gpio7";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -167,6 +187,8 @@
 
 		gpio8: gpio@48053000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x48053000 0x200>;
+			interrupts = <0 121 0x4>;
 			ti,hwmods = "gpio8";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -176,6 +198,8 @@
 
 		i2c1: i2c@48070000 {
 			compatible = "ti,omap4-i2c";
+			reg = <0x48070000 0x100>;
+			interrupts = <0 56 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c1";
@@ -183,6 +207,8 @@
 
 		i2c2: i2c@48072000 {
 			compatible = "ti,omap4-i2c";
+			reg = <0x48072000 0x100>;
+			interrupts = <0 57 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c2";
@@ -190,20 +216,26 @@
 
 		i2c3: i2c@48060000 {
 			compatible = "ti,omap4-i2c";
+			reg = <0x48060000 0x100>;
+			interrupts = <0 61 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c3";
 		};
 
-		i2c4: i2c@4807A000 {
+		i2c4: i2c@4807a000 {
 			compatible = "ti,omap4-i2c";
+			reg = <0x4807a000 0x100>;
+			interrupts = <0 62 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c4";
 		};
 
-		i2c5: i2c@4807C000 {
+		i2c5: i2c@4807c000 {
 			compatible = "ti,omap4-i2c";
+			reg = <0x4807c000 0x100>;
+			interrupts = <0 60 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c5";
@@ -211,42 +243,56 @@
 
 		uart1: serial@4806a000 {
 			compatible = "ti,omap4-uart";
+			reg = <0x4806a000 0x100>;
+			interrupts = <0 72 0x4>;
 			ti,hwmods = "uart1";
 			clock-frequency = <48000000>;
 		};
 
 		uart2: serial@4806c000 {
 			compatible = "ti,omap4-uart";
+			reg = <0x4806c000 0x100>;
+			interrupts = <0 73 0x4>;
 			ti,hwmods = "uart2";
 			clock-frequency = <48000000>;
 		};
 
 		uart3: serial@48020000 {
 			compatible = "ti,omap4-uart";
+			reg = <0x48020000 0x100>;
+			interrupts = <0 74 0x4>;
 			ti,hwmods = "uart3";
 			clock-frequency = <48000000>;
 		};
 
 		uart4: serial@4806e000 {
 			compatible = "ti,omap4-uart";
+			reg = <0x4806e000 0x100>;
+			interrupts = <0 70 0x4>;
 			ti,hwmods = "uart4";
 			clock-frequency = <48000000>;
 		};
 
 		uart5: serial@48066000 {
-			compatible = "ti,omap5-uart";
+			compatible = "ti,omap4-uart";
+			reg = <0x48066000 0x100>;
+			interrupts = <0 105 0x4>;
 			ti,hwmods = "uart5";
 			clock-frequency = <48000000>;
 		};
 
 		uart6: serial@48068000 {
-			compatible = "ti,omap6-uart";
+			compatible = "ti,omap4-uart";
+			reg = <0x48068000 0x100>;
+			interrupts = <0 106 0x4>;
 			ti,hwmods = "uart6";
 			clock-frequency = <48000000>;
 		};
 
 		mmc1: mmc@4809c000 {
 			compatible = "ti,omap4-hsmmc";
+			reg = <0x4809c000 0x400>;
+			interrupts = <0 83 0x4>;
 			ti,hwmods = "mmc1";
 			ti,dual-volt;
 			ti,needs-special-reset;
@@ -254,24 +300,32 @@
 
 		mmc2: mmc@480b4000 {
 			compatible = "ti,omap4-hsmmc";
+			reg = <0x480b4000 0x400>;
+			interrupts = <0 86 0x4>;
 			ti,hwmods = "mmc2";
 			ti,needs-special-reset;
 		};
 
 		mmc3: mmc@480ad000 {
 			compatible = "ti,omap4-hsmmc";
+			reg = <0x480ad000 0x400>;
+			interrupts = <0 94 0x4>;
 			ti,hwmods = "mmc3";
 			ti,needs-special-reset;
 		};
 
 		mmc4: mmc@480d1000 {
 			compatible = "ti,omap4-hsmmc";
+			reg = <0x480d1000 0x400>;
+			interrupts = <0 96 0x4>;
 			ti,hwmods = "mmc4";
 			ti,needs-special-reset;
 		};
 
 		mmc5: mmc@480d5000 {
 			compatible = "ti,omap4-hsmmc";
+			reg = <0x480d5000 0x400>;
+			interrupts = <0 59 0x4>;
 			ti,hwmods = "mmc5";
 			ti,needs-special-reset;
 		};
@@ -287,7 +341,6 @@
 			      <0x49032000 0x7f>; /* L3 Interconnect */
 			reg-names = "mpu", "dma";
 			interrupts = <0 112 0x4>;
-			interrupt-parent = <&gic>;
 			ti,hwmods = "mcpdm";
 		};
 
@@ -297,7 +350,6 @@
 			      <0x4902e000 0x7f>; /* L3 Interconnect */
 			reg-names = "mpu", "dma";
 			interrupts = <0 114 0x4>;
-			interrupt-parent = <&gic>;
 			ti,hwmods = "dmic";
 		};
 
@@ -308,7 +360,6 @@
 			reg-names = "mpu", "dma";
 			interrupts = <0 17 0x4>;
 			interrupt-names = "common";
-			interrupt-parent = <&gic>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp1";
 		};
@@ -320,7 +371,6 @@
 			reg-names = "mpu", "dma";
 			interrupts = <0 22 0x4>;
 			interrupt-names = "common";
-			interrupt-parent = <&gic>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp2";
 		};
@@ -332,9 +382,119 @@
 			reg-names = "mpu", "dma";
 			interrupts = <0 23 0x4>;
 			interrupt-names = "common";
-			interrupt-parent = <&gic>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp3";
 		};
+
+		timer1: timer@4ae18000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4ae18000 0x80>;
+			interrupts = <0 37 0x4>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
+
+		timer2: timer@48032000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48032000 0x80>;
+			interrupts = <0 38 0x4>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@48034000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48034000 0x80>;
+			interrupts = <0 39 0x4>;
+			ti,hwmods = "timer3";
+		};
+
+		timer4: timer@48036000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48036000 0x80>;
+			interrupts = <0 40 0x4>;
+			ti,hwmods = "timer4";
+		};
+
+		timer5: timer@40138000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x40138000 0x80>,
+			      <0x49038000 0x80>;
+			interrupts = <0 41 0x4>;
+			ti,hwmods = "timer5";
+			ti,timer-dsp;
+		};
+
+		timer6: timer@4013a000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4013a000 0x80>,
+			      <0x4903a000 0x80>;
+			interrupts = <0 42 0x4>;
+			ti,hwmods = "timer6";
+			ti,timer-dsp;
+			ti,timer-pwm;
+		};
+
+		timer7: timer@4013c000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4013c000 0x80>,
+			      <0x4903c000 0x80>;
+			interrupts = <0 43 0x4>;
+			ti,hwmods = "timer7";
+			ti,timer-dsp;
+		};
+
+		timer8: timer@4013e000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4013e000 0x80>,
+			      <0x4903e000 0x80>;
+			interrupts = <0 44 0x4>;
+			ti,hwmods = "timer8";
+			ti,timer-dsp;
+			ti,timer-pwm;
+		};
+
+		timer9: timer@4803e000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4803e000 0x80>;
+			interrupts = <0 45 0x4>;
+			ti,hwmods = "timer9";
+		};
+
+		timer10: timer@48086000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48086000 0x80>;
+			interrupts = <0 46 0x4>;
+			ti,hwmods = "timer10";
+		};
+
+		timer11: timer@48088000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48088000 0x80>;
+			interrupts = <0 47 0x4>;
+			ti,hwmods = "timer11";
+			ti,timer-pwm;
+		};
+
+		emif1: emif@0x4c000000 {
+			compatible	= "ti,emif-4d5";
+			ti,hwmods	= "emif1";
+			phy-type	= <2>; /* DDR PHY type: Intelli PHY */
+			reg = <0x4c000000 0x400>;
+			interrupts = <0 110 0x4>;
+			hw-caps-read-idle-ctrl;
+			hw-caps-ll-interface;
+			hw-caps-temp-alert;
+		};
+
+		emif2: emif@0x4d000000 {
+			compatible	= "ti,emif-4d5";
+			ti,hwmods	= "emif2";
+			phy-type	= <2>; /* DDR PHY type: Intelli PHY */
+			reg = <0x4d000000 0x400>;
+			interrupts = <0 111 0x4>;
+			hw-caps-read-idle-ctrl;
+			hw-caps-ll-interface;
+			hw-caps-temp-alert;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
new file mode 100644
index 00000000000..5a3a58b7e18
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "orion5x.dtsi"
+
+/ {
+	model = "LaCie Ethernet Disk mini V2";
+	compatible = "lacie,ethernet-disk-mini-v2", "marvell-orion5x-88f5182", "marvell,orion5x";
+
+	memory {
+		reg = <0x00000000 0x4000000>; /* 64 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			clock-frequency = <166666667>;
+			status = "okay";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		button@1 {
+			label = "Power-on Switch";
+			linux,code = <116>; /* KEY_POWER */
+			gpios = <&gpio0 18 0>;
+		};
+	};
+
+	gpio_leds {
+		compatible = "gpio-leds";
+
+		led@1 {
+			label = "power:blue";
+			gpios = <&gpio0 16 1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi
new file mode 100644
index 00000000000..8aad00f81ed
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x.dtsi
@@ -0,0 +1,98 @@
+/*
+ * Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	model = "Marvell Orion5x SoC";
+	compatible = "marvell,orion5x";
+	interrupt-parent = <&intc>;
+
+	intc: interrupt-controller {
+		compatible = "marvell,orion-intc", "marvell,intc";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0xf1020204 0x04>;
+	};
+
+	ocp@f1000000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0xf1000000 0x4000000
+		          0xf2200000 0xf2200000 0x0000800>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		gpio0: gpio@10100 {
+			compatible = "marvell,orion-gpio";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0x10100 0x40>;
+			ngpio = <32>;
+			interrupts = <6>, <7>, <8>, <9>;
+		};
+
+		serial@12000 {
+			compatible = "ns16550a";
+			reg = <0x12000 0x100>;
+			reg-shift = <2>;
+			interrupts = <3>;
+			/* set clock-frequency in board dts */
+			status = "disabled";
+		};
+
+		serial@12100 {
+			compatible = "ns16550a";
+			reg = <0x12100 0x100>;
+			reg-shift = <2>;
+			interrupts = <4>;
+			/* set clock-frequency in board dts */
+			status = "disabled";
+		};
+
+		spi@10600 {
+			compatible = "marvell,orion-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			reg = <0x10600 0x28>;
+			status = "disabled";
+		};
+
+		wdt@20300 {
+			compatible = "marvell,orion-wdt";
+			reg = <0x20300 0x28>;
+			status = "okay";
+		};
+
+		sata@80000 {
+			compatible = "marvell,orion-sata";
+			reg = <0x80000 0x5000>;
+			interrupts = <29>;
+			status = "disabled";
+		};
+
+		i2c@11000 {
+			compatible = "marvell,mv64xxx-i2c";
+			reg = <0x11000 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <5>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		crypto@90000 {
+			compatible = "marvell,orion-crypto";
+			reg = <0x90000 0x10000>,
+			      <0xf2200000 0x800>;
+			reg-names = "regs", "sram";
+			interrupts = <22>;
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/samsung_k3pe0e000b.dtsi b/arch/arm/boot/dts/samsung_k3pe0e000b.dtsi
new file mode 100644
index 00000000000..9657a5cbc3a
--- /dev/null
+++ b/arch/arm/boot/dts/samsung_k3pe0e000b.dtsi
@@ -0,0 +1,67 @@
+/*
+ * Timings and Geometry for Samsung K3PE0E000B memory part
+ */
+
+/ {
+	samsung_K3PE0E000B: lpddr2 {
+		compatible	= "Samsung,K3PE0E000B","jedec,lpddr2-s4";
+		density		= <4096>;
+		io-width	= <32>;
+
+		tRPab-min-tck	= <3>;
+		tRCD-min-tck	= <3>;
+		tWR-min-tck	= <3>;
+		tRASmin-min-tck	= <3>;
+		tRRD-min-tck	= <2>;
+		tWTR-min-tck	= <2>;
+		tXP-min-tck	= <2>;
+		tRTP-min-tck	= <2>;
+		tCKE-min-tck	= <3>;
+		tCKESR-min-tck	= <3>;
+		tFAW-min-tck	= <8>;
+
+		timings_samsung_K3PE0E000B_533MHz: lpddr2-timings@0 {
+			compatible	= "jedec,lpddr2-timings";
+			min-freq	= <10000000>;
+			max-freq	= <533333333>;
+			tRPab		= <21000>;
+			tRCD		= <18000>;
+			tWR		= <15000>;
+			tRAS-min	= <42000>;
+			tRRD		= <10000>;
+			tWTR		= <7500>;
+			tXP		= <7500>;
+			tRTP		= <7500>;
+			tCKESR		= <15000>;
+			tDQSCK-max	= <5500>;
+			tFAW		= <50000>;
+			tZQCS		= <90000>;
+			tZQCL		= <360000>;
+			tZQinit		= <1000000>;
+			tRAS-max-ns	= <70000>;
+			tDQSCK-max-derated = <6000>;
+		};
+
+		timings_samsung_K3PE0E000B_266MHz: lpddr2-timings@1 {
+			compatible	= "jedec,lpddr2-timings";
+			min-freq	= <10000000>;
+			max-freq	= <266666666>;
+			tRPab		= <21000>;
+			tRCD		= <18000>;
+			tWR		= <15000>;
+			tRAS-min	= <42000>;
+			tRRD		= <10000>;
+			tWTR		= <7500>;
+			tXP		= <7500>;
+			tRTP		= <7500>;
+			tCKESR		= <15000>;
+			tDQSCK-max	= <5500>;
+			tFAW		= <50000>;
+			tZQCS		= <90000>;
+			tZQCL		= <360000>;
+			tZQinit		= <1000000>;
+			tRAS-max-ns	= <70000>;
+			tDQSCK-max-derated = <6000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts
index 702c0baa600..9e02a913eb6 100644
--- a/arch/arm/boot/dts/snowball.dts
+++ b/arch/arm/boot/dts/snowball.dts
@@ -14,7 +14,7 @@
 
 / {
 	model = "Calao Systems Snowball platform with device tree";
-	compatible = "calaosystems,snowball-a9500";
+	compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500";
 
 	memory {
 		reg = <0x00000000 0x20000000>;
@@ -120,10 +120,10 @@
 		};
 
 		// External Micro SD slot
-		sdi@80126000 {
+		sdi0_per1@80126000 {
 			arm,primecell-periphid = <0x10480180>;
 			max-frequency = <50000000>;
-			bus-width = <8>;
+			bus-width = <4>;
 			mmc-cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
 
@@ -134,7 +134,7 @@
 		};
 
 		// On-board eMMC
-		sdi@80114000 {
+		sdi4_per2@80114000 {
 			arm,primecell-periphid = <0x10480180>;
 		        max-frequency = <50000000>;
 			bus-width = <8>;
@@ -183,5 +183,137 @@
 				reg = <0x33>;
 			};
 		};
+
+		prcmu@80157000 {
+			db8500-prcmu-regulators {
+				db8500_vape_reg: db8500_vape {
+					regulator-name = "db8500-vape";
+				};
+
+				db8500_varm_reg: db8500_varm {
+					regulator-name = "db8500-varm";
+				};
+
+				db8500_vmodem_reg: db8500_vmodem {
+					regulator-name = "db8500-vmodem";
+				};
+
+				db8500_vpll_reg: db8500_vpll {
+					regulator-name = "db8500-vpll";
+				};
+
+				db8500_vsmps1_reg: db8500_vsmps1 {
+					regulator-name = "db8500-vsmps1";
+				};
+
+				db8500_vsmps2_reg: db8500_vsmps2 {
+					regulator-name = "db8500-vsmps2";
+				};
+
+				db8500_vsmps3_reg: db8500_vsmps3 {
+					regulator-name = "db8500-vsmps3";
+				};
+
+				db8500_vrf1_reg: db8500_vrf1 {
+					regulator-name = "db8500-vrf1";
+				};
+
+				db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
+					regulator-name = "db8500-sva-mmdsp";
+				};
+
+				db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
+					regulator-name = "db8500-sva-mmdsp-ret";
+				};
+
+				db8500_sva_pipe_reg: db8500_sva_pipe {
+					regulator-name = "db8500_sva_pipe";
+				};
+
+				db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
+					regulator-name = "db8500_sia_mmdsp";
+				};
+
+				db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
+					regulator-name = "db8500-sia-mmdsp-ret";
+				};
+
+				db8500_sia_pipe_reg: db8500_sia_pipe {
+					regulator-name = "db8500-sia-pipe";
+				};
+
+				db8500_sga_reg: db8500_sga {
+					regulator-name = "db8500-sga";
+				};
+
+				db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
+					regulator-name = "db8500-b2r2-mcde";
+				};
+
+				db8500_esram12_reg: db8500_esram12 {
+					regulator-name = "db8500-esram12";
+				};
+
+				db8500_esram12_ret_reg: db8500_esram12_ret {
+					regulator-name = "db8500-esram12-ret";
+				};
+
+				db8500_esram34_reg: db8500_esram34 {
+					regulator-name = "db8500-esram34";
+				};
+
+				db8500_esram34_ret_reg: db8500_esram34_ret {
+					regulator-name = "db8500-esram34-ret";
+				};
+			};
+
+			ab8500@5 {
+				ab8500-regulators {
+					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+						regulator-name = "V-DISPLAY";
+					};
+
+					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+						regulator-name = "V-eMMC1";
+					};
+
+					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+						regulator-name = "V-MMC-SD";
+					};
+
+					ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
+						regulator-name = "V-INTCORE";
+					};
+
+					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+						regulator-name = "V-TVOUT";
+					};
+
+					ab8500_ldo_usb_reg: ab8500_ldo_usb {
+						regulator-name = "dummy";
+					};
+
+					ab8500_ldo_audio_reg: ab8500_ldo_audio {
+						regulator-name = "V-AUD";
+					};
+
+					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+						regulator-name = "V-AMIC1";
+					};
+
+					ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
+						regulator-name = "V-AMIC2";
+					};
+
+					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+						regulator-name = "V-DMIC";
+					};
+
+					ab8500_ldo_ana_reg: ab8500_ldo_ana {
+						regulator-name = "V-CSI/DSI";
+					};
+				};
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/stuib.dtsi b/arch/arm/boot/dts/stuib.dtsi
new file mode 100644
index 00000000000..39446a247e7
--- /dev/null
+++ b/arch/arm/boot/dts/stuib.dtsi
@@ -0,0 +1,78 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+	soc-u9500 {
+		i2c@80004000 {
+			stmpe1601: stmpe1601@40 {
+				compatible = "st,stmpe1601";
+				reg = <0x40>;
+				interrupts = <26 0x1>;
+				interrupt-parent = <&gpio6>;
+				interrupt-controller;
+
+				wakeup-source;
+				st,autosleep-timeout = <1024>;
+
+				stmpe_keypad {
+					compatible = "st,stmpe-keypad";
+
+					debounce-interval = <64>;
+					st,scan-count = <8>;
+					st,no-autorepeat;
+
+					linux,keymap = <0x205006b
+							0x4010074
+							0x3050072
+							0x1030004
+							0x502006a
+							0x500000a
+							0x5008b
+							0x706001c
+							0x405000b
+							0x6070003
+							0x3040067
+							0x303006c
+							0x60400e7
+							0x602009e
+							0x4020073
+							0x5050002
+							0x4030069
+							0x3020008>;
+				};
+			};
+		};
+
+		i2c@80110000 {
+			bu21013_tp@0x5c {
+				compatible = "rhom,bu21013_tp";
+				reg = <0x5c>;
+				touch-gpio = <&gpio2 20 0x4>;
+				avdd-supply = <&ab8500_ldo_aux1_reg>;
+
+				rhom,touch-max-x = <384>;
+				rhom,touch-max-y = <704>;
+				rhom,flip-y;
+			};
+
+			bu21013_tp@0x5d {
+				compatible = "rhom,bu21013_tp";
+				reg = <0x5d>;
+				touch-gpio = <&gpio2 20 0x4>;
+				avdd-supply = <&ab8500_ldo_aux1_reg>;
+
+				rhom,touch-max-x = <384>;
+				rhom,touch-max-y = <704>;
+				rhom,flip-y;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts
index c3ef1ad26b6..43eb72af894 100644
--- a/arch/arm/boot/dts/tegra20-harmony.dts
+++ b/arch/arm/boot/dts/tegra20-harmony.dts
@@ -10,6 +10,18 @@
 		reg = <0x00000000 0x40000000>;
 	};
 
+	host1x {
+		hdmi {
+			status = "okay";
+
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+		};
+	};
+
 	pinmux {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
@@ -262,9 +274,9 @@
 		};
 	};
 
-	i2c@7000c400 {
+	hdmi_ddc: i2c@7000c400 {
 		status = "okay";
-		clock-frequency = <400000>;
+		clock-frequency = <100000>;
 	};
 
 	i2c@7000c500 {
@@ -297,131 +309,98 @@
 			vinldo9-supply = <&sm2_reg>;
 
 			regulators {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				sys_reg: regulator@0 {
-					reg = <0>;
-					regulator-compatible = "sys";
+				sys_reg: sys {
 					regulator-name = "vdd_sys";
 					regulator-always-on;
 				};
 
-				regulator@1 {
-					reg = <1>;
-					regulator-compatible = "sm0";
+				sm0 {
 					regulator-name = "vdd_sm0,vdd_core";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
 					regulator-always-on;
 				};
 
-				regulator@2 {
-					reg = <2>;
-					regulator-compatible = "sm1";
+				sm1 {
 					regulator-name = "vdd_sm1,vdd_cpu";
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1000000>;
 					regulator-always-on;
 				};
 
-				sm2_reg: regulator@3 {
-					reg = <3>;
-					regulator-compatible = "sm2";
+				sm2_reg: sm2 {
 					regulator-name = "vdd_sm2,vin_ldo*";
 					regulator-min-microvolt = <3700000>;
 					regulator-max-microvolt = <3700000>;
 					regulator-always-on;
 				};
 
-				regulator@4 {
-					reg = <4>;
-					regulator-compatible = "ldo0";
+				ldo0 {
 					regulator-name = "vdd_ldo0,vddio_pex_clk";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
 				};
 
-				regulator@5 {
-					reg = <5>;
-					regulator-compatible = "ldo1";
+				ldo1 {
 					regulator-name = "vdd_ldo1,avdd_pll*";
 					regulator-min-microvolt = <1100000>;
 					regulator-max-microvolt = <1100000>;
 					regulator-always-on;
 				};
 
-				regulator@6 {
-					reg = <6>;
-					regulator-compatible = "ldo2";
+				ldo2 {
 					regulator-name = "vdd_ldo2,vdd_rtc";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
 				};
 
-				regulator@7 {
-					reg = <7>;
-					regulator-compatible = "ldo3";
+				ldo3 {
 					regulator-name = "vdd_ldo3,avdd_usb*";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
 					regulator-always-on;
 				};
 
-				regulator@8 {
-					reg = <8>;
-					regulator-compatible = "ldo4";
+				ldo4 {
 					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 					regulator-always-on;
 				};
 
-				regulator@9 {
-					reg = <9>;
-					regulator-compatible = "ldo5";
+				ldo5 {
 					regulator-name = "vdd_ldo5,vcore_mmc";
 					regulator-min-microvolt = <2850000>;
 					regulator-max-microvolt = <2850000>;
 					regulator-always-on;
 				};
 
-				regulator@10 {
-					reg = <10>;
-					regulator-compatible = "ldo6";
+				ldo6 {
 					regulator-name = "vdd_ldo6,avdd_vdac";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 				};
 
-				regulator@11 {
-					reg = <11>;
-					regulator-compatible = "ldo7";
+				hdmi_vdd_reg: ldo7 {
 					regulator-name = "vdd_ldo7,avdd_hdmi";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
 				};
 
-				regulator@12 {
-					reg = <12>;
-					regulator-compatible = "ldo8";
+				hdmi_pll_reg: ldo8 {
 					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 				};
 
-				regulator@13 {
-					reg = <13>;
-					regulator-compatible = "ldo9";
+				ldo9 {
 					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
 					regulator-min-microvolt = <2850000>;
 					regulator-max-microvolt = <2850000>;
 					regulator-always-on;
 				};
 
-				regulator@14 {
-					reg = <14>;
-					regulator-compatible = "ldo_rtc";
+				ldo_rtc {
 					regulator-name = "vdd_rtc_out,vdd_cell";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
@@ -429,6 +408,11 @@
 				};
 			};
 		};
+
+		temperature-sensor@4c {
+			compatible = "adi,adt7461";
+			reg = <0x4c>;
+		};
 	};
 
 	pmc {
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index ddf287f52d4..6a93d1404c7 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -291,37 +291,26 @@
 			vinldo9-supply = <&sm2_reg>;
 
 			regulators {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				sys_reg: regulator@0 {
-					reg = <0>;
-					regulator-compatible = "sys";
+				sys_reg: sys {
 					regulator-name = "vdd_sys";
 					regulator-always-on;
 				};
 
-				regulator@1 {
-					reg = <1>;
-					regulator-compatible = "sm0";
+				sm0 {
 					regulator-name = "+1.2vs_sm0,vdd_core";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
 					regulator-always-on;
 				};
 
-				regulator@2 {
-					reg = <2>;
-					regulator-compatible = "sm1";
+				sm1 {
 					regulator-name = "+1.0vs_sm1,vdd_cpu";
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1000000>;
 					regulator-always-on;
 				};
 
-				sm2_reg: regulator@3 {
-					reg = <3>;
-					regulator-compatible = "sm2";
+				sm2_reg: sm2 {
 					regulator-name = "+3.7vs_sm2,vin_ldo*";
 					regulator-min-microvolt = <3700000>;
 					regulator-max-microvolt = <3700000>;
@@ -330,53 +319,41 @@
 
 				/* LDO0 is not connected to anything */
 
-				regulator@5 {
-					reg = <5>;
-					regulator-compatible = "ldo1";
+				ldo1 {
 					regulator-name = "+1.1vs_ldo1,avdd_pll*";
 					regulator-min-microvolt = <1100000>;
 					regulator-max-microvolt = <1100000>;
 					regulator-always-on;
 				};
 
-				regulator@6 {
-					reg = <6>;
-					regulator-compatible = "ldo2";
+				ldo2 {
 					regulator-name = "+1.2vs_ldo2,vdd_rtc";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
 				};
 
-				regulator@7 {
-					reg = <7>;
-					regulator-compatible = "ldo3";
+				ldo3 {
 					regulator-name = "+3.3vs_ldo3,avdd_usb*";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
 					regulator-always-on;
 				};
 
-				regulator@8 {
-					reg = <8>;
-					regulator-compatible = "ldo4";
+				ldo4 {
 					regulator-name = "+1.8vs_ldo4,avdd_osc,vddio_sys";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 					regulator-always-on;
 				};
 
-				regulator@9 {
-					reg = <9>;
-					regulator-compatible = "ldo5";
+				ldo5 {
 					regulator-name = "+2.85vs_ldo5,vcore_mmc";
 					regulator-min-microvolt = <2850000>;
 					regulator-max-microvolt = <2850000>;
 					regulator-always-on;
 				};
 
-				regulator@10 {
-					reg = <10>;
-					regulator-compatible = "ldo6";
+				ldo6 {
 					/*
 					 * Research indicates this should be
 					 * 1.8v; other boards that use this
@@ -390,34 +367,26 @@
 					regulator-max-microvolt = <1800000>;
 				};
 
-				regulator@11 {
-					reg = <11>;
-					regulator-compatible = "ldo7";
+				ldo7 {
 					regulator-name = "+3.3vs_ldo7,avdd_hdmi";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
 				};
 
-				regulator@12 {
-					reg = <12>;
-					regulator-compatible = "ldo8";
+				ldo8 {
 					regulator-name = "+1.8vs_ldo8,avdd_hdmi_pll";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 				};
 
-				regulator@13 {
-					reg = <13>;
-					regulator-compatible = "ldo9";
+				ldo9 {
 					regulator-name = "+2.85vs_ldo9,vdd_ddr_rx";
 					regulator-min-microvolt = <2850000>;
 					regulator-max-microvolt = <2850000>;
 					regulator-always-on;
 				};
 
-				regulator@14 {
-					reg = <14>;
-					regulator-compatible = "ldo_rtc";
+				ldo_rtc {
 					regulator-name = "+3.3vs_rtc";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/tegra20-plutux.dts b/arch/arm/boot/dts/tegra20-plutux.dts
index 331a3ef24d5..289480026fb 100644
--- a/arch/arm/boot/dts/tegra20-plutux.dts
+++ b/arch/arm/boot/dts/tegra20-plutux.dts
@@ -6,6 +6,12 @@
 	model = "Avionic Design Plutux board";
 	compatible = "ad,plutux", "ad,tamonten", "nvidia,tegra20";
 
+	host1x {
+		hdmi {
+			status = "okay";
+		};
+	};
+
 	i2c@7000c000 {
 		wm8903: wm8903@1a {
 			compatible = "wlf,wm8903";
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index f0ba901676a..eafeca65eb2 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -395,37 +395,26 @@
 			vinldo9-supply = <&sm2_reg>;
 
 			regulators {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				sys_reg: regulator@0 {
-					reg = <0>;
-					regulator-compatible = "sys";
+				sys_reg: sys {
 					regulator-name = "vdd_sys";
 					regulator-always-on;
 				};
 
-				regulator@1 {
-					reg = <1>;
-					regulator-compatible = "sm0";
+				sm0 {
 					regulator-name = "vdd_sm0,vdd_core";
 					regulator-min-microvolt = <1300000>;
 					regulator-max-microvolt = <1300000>;
 					regulator-always-on;
 				};
 
-				regulator@2 {
-					reg = <2>;
-					regulator-compatible = "sm1";
+				sm1 {
 					regulator-name = "vdd_sm1,vdd_cpu";
 					regulator-min-microvolt = <1125000>;
 					regulator-max-microvolt = <1125000>;
 					regulator-always-on;
 				};
 
-				sm2_reg: regulator@3 {
-					reg = <3>;
-					regulator-compatible = "sm2";
+				sm2_reg: sm2 {
 					regulator-name = "vdd_sm2,vin_ldo*";
 					regulator-min-microvolt = <3700000>;
 					regulator-max-microvolt = <3700000>;
@@ -434,86 +423,66 @@
 
 				/* LDO0 is not connected to anything */
 
-				regulator@5 {
-					reg = <5>;
-					regulator-compatible = "ldo1";
+				ldo1 {
 					regulator-name = "vdd_ldo1,avdd_pll*";
 					regulator-min-microvolt = <1100000>;
 					regulator-max-microvolt = <1100000>;
 					regulator-always-on;
 				};
 
-				regulator@6 {
-					reg = <6>;
-					regulator-compatible = "ldo2";
+				ldo2 {
 					regulator-name = "vdd_ldo2,vdd_rtc";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
 				};
 
-				regulator@7 {
-					reg = <7>;
-					regulator-compatible = "ldo3";
+				ldo3 {
 					regulator-name = "vdd_ldo3,avdd_usb*";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
 					regulator-always-on;
 				};
 
-				regulator@8 {
-					reg = <8>;
-					regulator-compatible = "ldo4";
+				ldo4 {
 					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 					regulator-always-on;
 				};
 
-				regulator@9 {
-					reg = <9>;
-					regulator-compatible = "ldo5";
+				ldo5 {
 					regulator-name = "vdd_ldo5,vcore_mmc";
 					regulator-min-microvolt = <2850000>;
 					regulator-max-microvolt = <2850000>;
 					regulator-always-on;
 				};
 
-				regulator@10 {
-					reg = <10>;
-					regulator-compatible = "ldo6";
+				ldo6 {
 					regulator-name = "vdd_ldo6,avdd_vdac,vddio_vi,vddio_cam";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 				};
 
-				regulator@11 {
-					reg = <11>;
-					regulator-compatible = "ldo7";
+				ldo7 {
 					regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
 				};
 
-				regulator@12 {
-					reg = <12>;
-					regulator-compatible = "ldo8";
+				ldo8 {
 					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 				};
 
-				regulator@13 {
-					reg = <13>;
-					regulator-compatible = "ldo9";
+				ldo9 {
 					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
 					regulator-min-microvolt = <2850000>;
 					regulator-max-microvolt = <2850000>;
 					regulator-always-on;
 				};
 
-				regulator@14 {
-					reg = <14>;
-					regulator-compatible = "ldo_rtc";
+				ldo_rtc {
 					regulator-name = "vdd_rtc_out,vdd_cell";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
@@ -592,6 +561,12 @@
 		status = "okay";
 	};
 
+	sdhci@c8000000 {
+		status = "okay";
+		power-gpios = <&gpio 86 0>; /* gpio PK6 */
+		bus-width = <4>;
+	};
+
 	sdhci@c8000400 {
 		status = "okay";
 		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi
index f18cec9f6a7..a239ccdfaa5 100644
--- a/arch/arm/boot/dts/tegra20-tamonten.dtsi
+++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -8,6 +8,16 @@
 		reg = <0x00000000 0x20000000>;
 	};
 
+	host1x {
+		hdmi {
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+		};
+	};
+
 	pinmux {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
@@ -62,10 +72,6 @@
 				nvidia,pins = "dap4";
 				nvidia,function = "dap4";
 			};
-			ddc {
-				nvidia,pins = "ddc";
-				nvidia,function = "i2c2";
-			};
 			dta {
 				nvidia,pins = "dta", "dtd";
 				nvidia,function = "sdio2";
@@ -91,7 +97,7 @@
 				nvidia,function = "pcie";
 			};
 			hdint {
-				nvidia,pins = "hdint", "pta";
+				nvidia,pins = "hdint";
 				nvidia,function = "hdmi";
 			};
 			i2cp {
@@ -230,6 +236,39 @@
 				nvidia,pull = <1>;
 			};
 		};
+
+		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_pta: pinmux_i2cmux_pta {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "i2c2";
+			};
+		};
+
+		state_i2cmux_idle: pinmux_i2cmux_idle {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
 	};
 
 	i2s@70002800 {
@@ -246,6 +285,36 @@
 		status = "okay";
 	};
 
+	i2c@7000c400 {
+		clock-frequency = <100000>;
+		status = "okay";
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&{/i2c@7000c400}>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
 	i2c@7000d000 {
 		clock-frequency = <400000>;
 		status = "okay";
@@ -271,97 +340,72 @@
 			vinldo9-supply = <&sm2_reg>;
 
 			regulators {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				sys_reg: regulator@0 {
-					reg = <0>;
-					regulator-compatible = "sys";
+				sys_reg: sys {
 					regulator-name = "vdd_sys";
 					regulator-always-on;
 				};
 
-				regulator@1 {
-					reg = <1>;
-					regulator-compatible = "sm0";
+				sm0 {
 					regulator-name = "vdd_sys_sm0,vdd_core";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
 					regulator-always-on;
 				};
 
-				regulator@2 {
-					reg = <2>;
-					regulator-compatible = "sm1";
+				sm1 {
 					regulator-name = "vdd_sys_sm1,vdd_cpu";
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1000000>;
 					regulator-always-on;
 				};
 
-				sm2_reg: regulator@3 {
-					reg = <3>;
-					regulator-compatible = "sm2";
+				sm2_reg: sm2 {
 					regulator-name = "vdd_sys_sm2,vin_ldo*";
 					regulator-min-microvolt = <3700000>;
 					regulator-max-microvolt = <3700000>;
 					regulator-always-on;
 				};
 
-				regulator@4 {
-					reg = <4>;
-					regulator-compatible = "ldo0";
+				ldo0 {
 					regulator-name = "vdd_ldo0,vddio_pex_clk";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
 				};
 
-				regulator@5 {
-					reg = <5>;
-					regulator-compatible = "ldo1";
+				ldo1 {
 					regulator-name = "vdd_ldo1,avdd_pll*";
 					regulator-min-microvolt = <1100000>;
 					regulator-max-microvolt = <1100000>;
 					regulator-always-on;
 				};
 
-				regulator@6 {
-					reg = <6>;
-					regulator-compatible = "ldo2";
+				ldo2 {
 					regulator-name = "vdd_ldo2,vdd_rtc";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
 				};
 
-				regulator@7 {
-					reg = <7>;
-					regulator-compatible = "ldo3";
+				ldo3 {
 					regulator-name = "vdd_ldo3,avdd_usb*";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
 					regulator-always-on;
 				};
 
-				regulator@8 {
-					reg = <8>;
-					regulator-compatible = "ldo4";
+				ldo4 {
 					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 					regulator-always-on;
 				};
 
-				regulator@9 {
-					reg = <9>;
-					regulator-compatible = "ldo5";
+				ldo5 {
 					regulator-name = "vdd_ldo5,vcore_mmc";
 					regulator-min-microvolt = <2850000>;
 					regulator-max-microvolt = <2850000>;
 				};
 
-				regulator@10 {
-					reg = <10>;
-					regulator-compatible = "ldo6";
+				ldo6 {
 					regulator-name = "vdd_ldo6,avdd_vdac";
 					/*
 					 * According to the Tegra 2 Automotive
@@ -373,25 +417,19 @@
 					regulator-max-microvolt = <2850000>;
 				};
 
-				regulator@11 {
-					reg = <11>;
-					regulator-compatible = "ldo7";
+				hdmi_vdd_reg: ldo7 {
 					regulator-name = "vdd_ldo7,avdd_hdmi";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
 				};
 
-				regulator@12 {
-					reg = <12>;
-					regulator-compatible = "ldo8";
+				hdmi_pll_reg: ldo8 {
 					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 				};
 
-				regulator@13 {
-					reg = <13>;
-					regulator-compatible = "ldo9";
+				ldo9 {
 					regulator-name = "vdd_ldo9,vdd_ddr_rx,avdd_cam";
 					/*
 					 * According to the Tegra 2 Automotive
@@ -404,9 +442,7 @@
 					regulator-always-on;
 				};
 
-				regulator@14 {
-					reg = <14>;
-					regulator-compatible = "ldo_rtc";
+				ldo_rtc {
 					regulator-name = "vdd_rtc_out";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
@@ -414,6 +450,11 @@
 				};
 			};
 		};
+
+		temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+		};
 	};
 
 	pmc {
diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts
index 9aff31b0fe4..402b21004be 100644
--- a/arch/arm/boot/dts/tegra20-tec.dts
+++ b/arch/arm/boot/dts/tegra20-tec.dts
@@ -6,10 +6,13 @@
 	model = "Avionic Design Tamonten Evaluation Carrier";
 	compatible = "ad,tec", "ad,tamonten", "nvidia,tegra20";
 
-	i2c@7000c000 {
-		clock-frequency = <400000>;
-		status = "okay";
+	host1x {
+		hdmi {
+			status = "okay";
+		};
+	};
 
+	i2c@7000c000 {
 		wm8903: wm8903@1a {
 			compatible = "wlf,wm8903";
 			reg = <0x1a>;
diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts
index 27fb8a67ea4..b70b4cb754c 100644
--- a/arch/arm/boot/dts/tegra20-trimslice.dts
+++ b/arch/arm/boot/dts/tegra20-trimslice.dts
@@ -10,6 +10,18 @@
 		reg = <0x00000000 0x40000000>;
 	};
 
+	host1x {
+		hdmi {
+			status = "okay";
+
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+		};
+	};
+
 	pinmux {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
@@ -249,14 +261,24 @@
 		clock-frequency = <216000000>;
 	};
 
-	i2c@7000c000 {
+	dvi_ddc: i2c@7000c000 {
 		status = "okay";
-		clock-frequency = <400000>;
+		clock-frequency = <100000>;
 	};
 
-	i2c@7000c400 {
+	spi@7000c380 {
 		status = "okay";
-		clock-frequency = <400000>;
+		spi-max-frequency = <48000000>;
+		spi-flash@0 {
+			compatible = "winbond,w25q80bl";
+			reg = <0>;
+			spi-max-frequency = <48000000>;
+		};
+	};
+
+	hdmi_ddc: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
 	};
 
 	i2c@7000c500 {
@@ -300,6 +322,30 @@
 		bus-width = <4>;
 	};
 
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hdmi_vdd_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "avdd_hdmi";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		hdmi_pll_reg: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "avdd_hdmi_pll";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+	};
+
 	sound {
 		compatible = "nvidia,tegra-audio-trimslice";
 		nvidia,i2s-controller = <&tegra_i2s1>;
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index 3e5952fcfbc..adc47547eaa 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -64,11 +64,6 @@
 				nvidia,pins = "dap4";
 				nvidia,function = "dap4";
 			};
-			ddc {
-				nvidia,pins = "ddc", "owc", "spdi", "spdo",
-					"uac";
-				nvidia,function = "rsvd2";
-			};
 			dta {
 				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
 				nvidia,function = "vi";
@@ -98,7 +93,7 @@
 				nvidia,function = "pcie";
 			};
 			hdint {
-				nvidia,pins = "hdint", "pta";
+				nvidia,pins = "hdint";
 				nvidia,function = "hdmi";
 			};
 			i2cp {
@@ -129,6 +124,10 @@
 					"lspi", "lvp1", "lvs";
 				nvidia,function = "displaya";
 			};
+			owc {
+				nvidia,pins = "owc", "spdi", "spdo", "uac";
+				nvidia,function = "rsvd2";
+			};
 			pmc {
 				nvidia,pins = "pmc";
 				nvidia,function = "pwr_on";
@@ -237,6 +236,49 @@
 					"ld23_22";
 				nvidia,pull = <1>;
 			};
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1";
+				nvidia,high-speed-mode = <0>;
+				nvidia,schmitt = <1>;
+				nvidia,low-power-mode = <3>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <3>;
+				nvidia,slew-rate-falling = <3>;
+			};
+		};
+
+		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_pta: pinmux_i2cmux_pta {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "i2c2";
+			};
+		};
+
+		state_i2cmux_idle: pinmux_i2cmux_idle {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
 		};
 	};
 
@@ -281,6 +323,31 @@
 		clock-frequency = <400000>;
 	};
 
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&{/i2c@7000c400}>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
 	i2c@7000c500 {
 		status = "okay";
 		clock-frequency = <400000>;
@@ -311,37 +378,26 @@
 			vinldo9-supply = <&sm2_reg>;
 
 			regulators {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				sys_reg: regulator@0 {
-					reg = <0>;
-					regulator-compatible = "sys";
+				sys_reg: sys {
 					regulator-name = "vdd_sys";
 					regulator-always-on;
 				};
 
-				regulator@1 {
-					reg = <1>;
-					regulator-compatible = "sm0";
+				sm0 {
 					regulator-name = "vdd_sm0,vdd_core";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
 					regulator-always-on;
 				};
 
-				regulator@2 {
-					reg = <2>;
-					regulator-compatible = "sm1";
+				sm1 {
 					regulator-name = "vdd_sm1,vdd_cpu";
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1000000>;
 					regulator-always-on;
 				};
 
-				sm2_reg: regulator@3 {
-					reg = <3>;
-					regulator-compatible = "sm2";
+				sm2_reg: sm2 {
 					regulator-name = "vdd_sm2,vin_ldo*";
 					regulator-min-microvolt = <3700000>;
 					regulator-max-microvolt = <3700000>;
@@ -350,86 +406,66 @@
 
 				/* LDO0 is not connected to anything */
 
-				regulator@5 {
-					reg = <5>;
-					regulator-compatible = "ldo1";
+				ldo1 {
 					regulator-name = "vdd_ldo1,avdd_pll*";
 					regulator-min-microvolt = <1100000>;
 					regulator-max-microvolt = <1100000>;
 					regulator-always-on;
 				};
 
-				regulator@6 {
-					reg = <6>;
-					regulator-compatible = "ldo2";
+				ldo2 {
 					regulator-name = "vdd_ldo2,vdd_rtc";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
 				};
 
-				regulator@7 {
-					reg = <7>;
-					regulator-compatible = "ldo3";
+				ldo3 {
 					regulator-name = "vdd_ldo3,avdd_usb*";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
 					regulator-always-on;
 				};
 
-				regulator@8 {
-					reg = <8>;
-					regulator-compatible = "ldo4";
+				ldo4 {
 					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 					regulator-always-on;
 				};
 
-				regulator@9 {
-					reg = <9>;
-					regulator-compatible = "ldo5";
+				ldo5 {
 					regulator-name = "vdd_ldo5,vcore_mmc";
 					regulator-min-microvolt = <2850000>;
 					regulator-max-microvolt = <2850000>;
 					regulator-always-on;
 				};
 
-				regulator@10 {
-					reg = <10>;
-					regulator-compatible = "ldo6";
+				ldo6 {
 					regulator-name = "vdd_ldo6,avdd_vdac";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 				};
 
-				regulator@11 {
-					reg = <11>;
-					regulator-compatible = "ldo7";
+				ldo7 {
 					regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
 				};
 
-				regulator@12 {
-					reg = <12>;
-					regulator-compatible = "ldo8";
+				ldo8 {
 					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 				};
 
-				regulator@13 {
-					reg = <13>;
-					regulator-compatible = "ldo9";
+				ldo9 {
 					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
 					regulator-min-microvolt = <2850000>;
 					regulator-max-microvolt = <2850000>;
 					regulator-always-on;
 				};
 
-				regulator@14 {
-					reg = <14>;
-					regulator-compatible = "ldo_rtc";
+				ldo_rtc {
 					regulator-name = "vdd_rtc_out,vdd_cell";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
@@ -437,6 +473,11 @@
 				};
 			};
 		};
+
+		temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+		};
 	};
 
 	pmc {
@@ -456,6 +497,12 @@
 		status = "okay";
 	};
 
+	sdhci@c8000000 {
+		status = "okay";
+		power-gpios = <&gpio 86 0>; /* gpio PK6 */
+		bus-width = <4>;
+	};
+
 	sdhci@c8000400 {
 		status = "okay";
 		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts
index c636d002d6d..20d576ecd55 100644
--- a/arch/arm/boot/dts/tegra20-whistler.dts
+++ b/arch/arm/boot/dts/tegra20-whistler.dts
@@ -10,6 +10,18 @@
 		reg = <0x00000000 0x20000000>;
 	};
 
+	host1x {
+		hdmi {
+			status = "okay";
+
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+		};
+	};
+
 	pinmux {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
@@ -246,6 +258,11 @@
 		clock-frequency = <216000000>;
 	};
 
+	hdmi_ddc: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
 	i2c@7000d000 {
 		status = "okay";
 		clock-frequency = <100000>;
@@ -295,243 +312,182 @@
 			in20-supply = <&mbatt_reg>;
 
 			regulators {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				mbatt_reg: regulator@0 {
-					reg = <0>;
-					regulator-compatible = "mbatt";
+				mbatt_reg: mbatt {
 					regulator-name = "vbat_pmu";
 					regulator-always-on;
 				};
 
-				regulator@1 {
-					reg = <1>;
-					regulator-compatible = "sd1";
+				sd1 {
 					regulator-name = "nvvdd_sv1,vdd_cpu_pmu";
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1000000>;
 					regulator-always-on;
 				};
 
-				regulator@2 {
-					reg = <2>;
-					regulator-compatible = "sd2";
+				sd2 {
 					regulator-name = "nvvdd_sv2,vdd_core";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
 					regulator-always-on;
 				};
 
-				nvvdd_sv3_reg: regulator@3 {
-					reg = <3>;
-					regulator-compatible = "sd3";
+				nvvdd_sv3_reg: sd3 {
 					regulator-name = "nvvdd_sv3";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 					regulator-always-on;
 				};
 
-				regulator@4 {
-					reg = <4>;
-					regulator-compatible = "ldo1";
+				ldo1 {
 					regulator-name = "nvvdd_ldo1,vddio_rx_ddr,vcore_acc";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
 					regulator-always-on;
 				};
 
-				regulator@5 {
-					reg = <5>;
-					regulator-compatible = "ldo2";
+				ldo2 {
 					regulator-name = "nvvdd_ldo2,avdd_pll*";
 					regulator-min-microvolt = <1100000>;
 					regulator-max-microvolt = <1100000>;
 					regulator-always-on;
 				};
 
-				regulator@6 {
-					reg = <6>;
-					regulator-compatible = "ldo3";
+				ldo3 {
 					regulator-name = "nvvdd_ldo3,vcom_1v8b";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 					regulator-always-on;
 				};
 
-				regulator@7 {
-					reg = <7>;
-					regulator-compatible = "ldo4";
+				ldo4 {
 					regulator-name = "nvvdd_ldo4,avdd_usb*";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
 					regulator-always-on;
 				};
 
-				regulator@8 {
-					reg = <8>;
-					regulator-compatible = "ldo5";
+				ldo5 {
 					regulator-name = "nvvdd_ldo5,vcore_mmc,avdd_lcd1,vddio_1wire";
 					regulator-min-microvolt = <2800000>;
 					regulator-max-microvolt = <2800000>;
 					regulator-always-on;
 				};
 
-				regulator@9 {
-					reg = <9>;
-					regulator-compatible = "ldo6";
+				hdmi_pll_reg: ldo6 {
 					regulator-name = "nvvdd_ldo6,avdd_hdmi_pll";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 				};
 
-				regulator@10 {
-					reg = <10>;
-					regulator-compatible = "ldo7";
+				ldo7 {
 					regulator-name = "nvvdd_ldo7,avddio_audio";
 					regulator-min-microvolt = <2800000>;
 					regulator-max-microvolt = <2800000>;
 					regulator-always-on;
 				};
 
-				regulator@11 {
-					reg = <11>;
-					regulator-compatible = "ldo8";
+				ldo8 {
 					regulator-name = "nvvdd_ldo8,vcom_3v0,vcore_cmps";
 					regulator-min-microvolt = <3000000>;
 					regulator-max-microvolt = <3000000>;
 				};
 
-				regulator@12 {
-					reg = <12>;
-					regulator-compatible = "ldo9";
+				ldo9 {
 					regulator-name = "nvvdd_ldo9,avdd_cam*";
 					regulator-min-microvolt = <2800000>;
 					regulator-max-microvolt = <2800000>;
 				};
 
-				regulator@13 {
-					reg = <13>;
-					regulator-compatible = "ldo10";
+				ldo10 {
 					regulator-name = "nvvdd_ldo10,avdd_usb_ic_3v0";
 					regulator-min-microvolt = <3000000>;
 					regulator-max-microvolt = <3000000>;
 					regulator-always-on;
 				};
 
-				regulator@14 {
-					reg = <14>;
-					regulator-compatible = "ldo11";
+				hdmi_vdd_reg: ldo11 {
 					regulator-name = "nvvdd_ldo11,vddio_pex_clk,vcom_33,avdd_hdmi";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
 				};
 
-				regulator@15 {
-					reg = <15>;
-					regulator-compatible = "ldo12";
+				ldo12 {
 					regulator-name = "nvvdd_ldo12,vddio_sdio";
 					regulator-min-microvolt = <2800000>;
 					regulator-max-microvolt = <2800000>;
 					regulator-always-on;
 				};
 
-				regulator@16 {
-					reg = <16>;
-					regulator-compatible = "ldo13";
+				ldo13 {
 					regulator-name = "nvvdd_ldo13,vcore_phtn,vdd_af";
 					regulator-min-microvolt = <2800000>;
 					regulator-max-microvolt = <2800000>;
 				};
 
-				regulator@17 {
-					reg = <17>;
-					regulator-compatible = "ldo14";
+				ldo14 {
 					regulator-name = "nvvdd_ldo14,avdd_vdac";
 					regulator-min-microvolt = <2800000>;
 					regulator-max-microvolt = <2800000>;
 				};
 
-				regulator@18 {
-					reg = <18>;
-					regulator-compatible = "ldo15";
+				ldo15 {
 					regulator-name = "nvvdd_ldo15,vcore_temp,vddio_hdcp";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
 				};
 
-				regulator@19 {
-					reg = <19>;
-					regulator-compatible = "ldo16";
+				ldo16 {
 					regulator-name = "nvvdd_ldo16,vdd_dbrtr";
 					regulator-min-microvolt = <1300000>;
 					regulator-max-microvolt = <1300000>;
 				};
 
-				regulator@20 {
-					reg = <20>;
-					regulator-compatible = "ldo17";
+				ldo17 {
 					regulator-name = "nvvdd_ldo17,vddio_mipi";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
 				};
 
-				regulator@21 {
-					reg = <21>;
-					regulator-compatible = "ldo18";
+				ldo18 {
 					regulator-name = "nvvdd_ldo18,vddio_vi,vcore_cam*";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 				};
 
-				regulator@22 {
-					reg = <22>;
-					regulator-compatible = "ldo19";
+				ldo19 {
 					regulator-name = "nvvdd_ldo19,avdd_lcd2,vddio_lx";
 					regulator-min-microvolt = <2800000>;
 					regulator-max-microvolt = <2800000>;
 				};
 
-				regulator@23 {
-					reg = <23>;
-					regulator-compatible = "ldo20";
+				ldo20 {
 					regulator-name = "nvvdd_ldo20,vddio_ddr_1v2,vddio_hsic,vcom_1v2";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
 					regulator-always-on;
 				};
 
-				regulator@24 {
-					reg = <24>;
-					regulator-compatible = "out5v";
+				out5v {
 					regulator-name = "usb0_vbus_reg";
 				};
 
-				regulator@25 {
-					reg = <25>;
-					regulator-compatible = "out33v";
+				out33v {
 					regulator-name = "pmu_out3v3";
 				};
 
-				regulator@26 {
-					reg = <26>;
-					regulator-compatible = "bbat";
+				bbat {
 					regulator-name = "pmu_bbat";
 					regulator-min-microvolt = <2400000>;
 					regulator-max-microvolt = <2400000>;
 					regulator-always-on;
 				};
 
-				regulator@27 {
-					reg = <27>;
-					regulator-compatible = "sdby";
+				sdby {
 					regulator-name = "vdd_aon";
 					regulator-always-on;
 				};
 
-				regulator@28 {
-					reg = <28>;
-					regulator-compatible = "vrtc";
+				vrtc {
 					regulator-name = "vrtc,pmu_vccadc";
 					regulator-always-on;
 				};
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index f3a09d0d45b..fba998e3954 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -4,6 +4,102 @@
 	compatible = "nvidia,tegra20";
 	interrupt-parent = <&intc>;
 
+	host1x {
+		compatible = "nvidia,tegra20-host1x", "simple-bus";
+		reg = <0x50000000 0x00024000>;
+		interrupts = <0 65 0x04   /* mpcore syncpt */
+			      0 67 0x04>; /* mpcore general */
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0x54000000 0x54000000 0x04000000>;
+
+		mpe {
+			compatible = "nvidia,tegra20-mpe";
+			reg = <0x54040000 0x00040000>;
+			interrupts = <0 68 0x04>;
+		};
+
+		vi {
+			compatible = "nvidia,tegra20-vi";
+			reg = <0x54080000 0x00040000>;
+			interrupts = <0 69 0x04>;
+		};
+
+		epp {
+			compatible = "nvidia,tegra20-epp";
+			reg = <0x540c0000 0x00040000>;
+			interrupts = <0 70 0x04>;
+		};
+
+		isp {
+			compatible = "nvidia,tegra20-isp";
+			reg = <0x54100000 0x00040000>;
+			interrupts = <0 71 0x04>;
+		};
+
+		gr2d {
+			compatible = "nvidia,tegra20-gr2d";
+			reg = <0x54140000 0x00040000>;
+			interrupts = <0 72 0x04>;
+		};
+
+		gr3d {
+			compatible = "nvidia,tegra20-gr3d";
+			reg = <0x54180000 0x00040000>;
+		};
+
+		dc@54200000 {
+			compatible = "nvidia,tegra20-dc";
+			reg = <0x54200000 0x00040000>;
+			interrupts = <0 73 0x04>;
+
+			rgb {
+				status = "disabled";
+			};
+		};
+
+		dc@54240000 {
+			compatible = "nvidia,tegra20-dc";
+			reg = <0x54240000 0x00040000>;
+			interrupts = <0 74 0x04>;
+
+			rgb {
+				status = "disabled";
+			};
+		};
+
+		hdmi {
+			compatible = "nvidia,tegra20-hdmi";
+			reg = <0x54280000 0x00040000>;
+			interrupts = <0 75 0x04>;
+			status = "disabled";
+		};
+
+		tvo {
+			compatible = "nvidia,tegra20-tvo";
+			reg = <0x542c0000 0x00040000>;
+			interrupts = <0 76 0x04>;
+			status = "disabled";
+		};
+
+		dsi {
+			compatible = "nvidia,tegra20-dsi";
+			reg = <0x54300000 0x00040000>;
+			status = "disabled";
+		};
+	};
+
+	cache-controller@50043000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x50043000 0x1000>;
+		arm,data-latency = <5 5 2>;
+		arm,tag-latency = <4 4 2>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
 	intc: interrupt-controller {
 		compatible = "arm,cortex-a9-gic";
 		reg = <0x50041000 0x1000
@@ -138,6 +234,16 @@
 		status = "disabled";
 	};
 
+	spi@7000c380 {
+		compatible = "nvidia,tegra20-sflash";
+		reg = <0x7000c380 0x80>;
+		interrupts = <0 39 0x04>;
+		nvidia,dma-request-selector = <&apbdma 11>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
 	i2c@7000c400 {
 		compatible = "nvidia,tegra20-i2c";
 		reg = <0x7000c400 0x100>;
@@ -165,6 +271,46 @@
 		status = "disabled";
 	};
 
+	spi@7000d400 {
+		compatible = "nvidia,tegra20-slink";
+		reg = <0x7000d400 0x200>;
+		interrupts = <0 59 0x04>;
+		nvidia,dma-request-selector = <&apbdma 15>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi@7000d600 {
+		compatible = "nvidia,tegra20-slink";
+		reg = <0x7000d600 0x200>;
+		interrupts = <0 82 0x04>;
+		nvidia,dma-request-selector = <&apbdma 16>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi@7000d800 {
+		compatible = "nvidia,tegra20-slink";
+		reg = <0x7000d480 0x200>;
+		interrupts = <0 83 0x04>;
+		nvidia,dma-request-selector = <&apbdma 17>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi@7000da00 {
+		compatible = "nvidia,tegra20-slink";
+		reg = <0x7000da00 0x200>;
+		interrupts = <0 93 0x04>;
+		nvidia,dma-request-selector = <&apbdma 18>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
 	pmc {
 		compatible = "nvidia,tegra20-pmc";
 		reg = <0x7000e400 0x400>;
diff --git a/arch/arm/boot/dts/tegra30-cardhu-a02.dts b/arch/arm/boot/dts/tegra30-cardhu-a02.dts
index dd4222f00ec..adc88aa50eb 100644
--- a/arch/arm/boot/dts/tegra30-cardhu-a02.dts
+++ b/arch/arm/boot/dts/tegra30-cardhu-a02.dts
@@ -83,5 +83,11 @@
 			gpio = <&gpio 83 0>; /* GPIO PK3 */
 		};
 	};
+
+	sdhci@78000400 {
+		status = "okay";
+		power-gpios = <&gpio 28 0>; /* gpio PD4 */
+		bus-width = <4>;
+	};
 };
 
diff --git a/arch/arm/boot/dts/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/tegra30-cardhu-a04.dts
index 0828f097ca8..08163e145d5 100644
--- a/arch/arm/boot/dts/tegra30-cardhu-a04.dts
+++ b/arch/arm/boot/dts/tegra30-cardhu-a04.dts
@@ -95,4 +95,10 @@
 			gpio = <&gpio 232 0>; /* GPIO PDD0 */
 		};
 	};
+
+	sdhci@78000400 {
+		status = "okay";
+		power-gpios = <&gpio 27 0>; /* gpio PD3 */
+		bus-width = <4>;
+	};
 };
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index d10c9c5a360..bdb2a660f37 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -52,6 +52,22 @@
 				nvidia,pull = <2>;
 				nvidia,tristate = <0>;
 			};
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <0>;
+				nvidia,tristate = <0>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins =	"sdmmc3_cmd_pa7",
+						"sdmmc3_dat0_pb7",
+						"sdmmc3_dat1_pb6",
+						"sdmmc3_dat2_pb5",
+						"sdmmc3_dat3_pb4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <2>;
+				nvidia,tristate = <0>;
+			};
 			sdmmc4_clk_pcc4 {
 				nvidia,pins =	"sdmmc4_clk_pcc4",
 						"sdmmc4_rst_n_pcc3";
@@ -81,6 +97,15 @@
 				nvidia,pull = <0>;
 				nvidia,tristate = <0>;
 			};
+			sdio3 {
+				nvidia,pins = "drive_sdio3";
+				nvidia,high-speed-mode = <0>;
+				nvidia,schmitt = <0>;
+				nvidia,pull-down-strength = <46>;
+				nvidia,pull-up-strength = <42>;
+				nvidia,slew-rate-rising = <1>;
+				nvidia,slew-rate-falling = <1>;
+			};
 		};
 	};
 
@@ -171,56 +196,41 @@
 			vccio-supply = <&vdd_ac_bat_reg>;
 
 			regulators {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				vdd1_reg: regulator@0 {
-					reg = <0>;
-					regulator-compatible = "vdd1";
+				vdd1_reg: vdd1 {
 					regulator-name = "vddio_ddr_1v2";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
 					regulator-always-on;
 				};
 
-				vdd2_reg: regulator@1 {
-					reg = <1>;
-					regulator-compatible = "vdd2";
+				vdd2_reg: vdd2 {
 					regulator-name = "vdd_1v5_gen";
 					regulator-min-microvolt = <1500000>;
 					regulator-max-microvolt = <1500000>;
 					regulator-always-on;
 				};
 
-				vddctrl_reg: regulator@2 {
-					reg = <2>;
-					regulator-compatible = "vddctrl";
+				vddctrl_reg: vddctrl {
 					regulator-name = "vdd_cpu,vdd_sys";
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1000000>;
 					regulator-always-on;
 				};
 
-				vio_reg: regulator@3 {
-					reg = <3>;
-					regulator-compatible = "vio";
+				vio_reg: vio {
 					regulator-name = "vdd_1v8_gen";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 					regulator-always-on;
 				};
 
-				ldo1_reg: regulator@4 {
-					reg = <4>;
-					regulator-compatible = "ldo1";
+				ldo1_reg: ldo1 {
 					regulator-name = "vdd_pexa,vdd_pexb";
 					regulator-min-microvolt = <1050000>;
 					regulator-max-microvolt = <1050000>;
 				};
 
-				ldo2_reg: regulator@5 {
-					reg = <5>;
-					regulator-compatible = "ldo2";
+				ldo2_reg: ldo2 {
 					regulator-name = "vdd_sata,avdd_plle";
 					regulator-min-microvolt = <1050000>;
 					regulator-max-microvolt = <1050000>;
@@ -228,44 +238,34 @@
 
 				/* LDO3 is not connected to anything */
 
-				ldo4_reg: regulator@7 {
-					reg = <7>;
-					regulator-compatible = "ldo4";
+				ldo4_reg: ldo4 {
 					regulator-name = "vdd_rtc";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
 					regulator-always-on;
 				};
 
-				ldo5_reg: regulator@8 {
-					reg = <8>;
-					regulator-compatible = "ldo5";
+				ldo5_reg: ldo5 {
 					regulator-name = "vddio_sdmmc,avdd_vdac";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
 					regulator-always-on;
 				};
 
-				ldo6_reg: regulator@9 {
-					reg = <9>;
-					regulator-compatible = "ldo6";
+				ldo6_reg: ldo6 {
 					regulator-name = "avdd_dsi_csi,pwrdet_mipi";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
 				};
 
-				ldo7_reg: regulator@10 {
-					reg = <10>;
-					regulator-compatible = "ldo7";
+				ldo7_reg: ldo7 {
 					regulator-name = "vdd_pllm,x,u,a_p_c_s";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
 					regulator-always-on;
 				};
 
-				ldo8_reg: regulator@11 {
-					reg = <11>;
-					regulator-compatible = "ldo8";
+				ldo8_reg: ldo8 {
 					regulator-name = "vdd_ddr_hs";
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1000000>;
@@ -275,6 +275,16 @@
 		};
 	};
 
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+		spi-flash@1 {
+			compatible = "winbond,w25q32";
+			reg = <1>;
+			spi-max-frequency = <20000000>;
+		};
+	};
+
 	ahub {
 		i2s@70080400 {
 			status = "okay";
@@ -409,6 +419,8 @@
 			regulator-name = "vdd_com";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
 			enable-active-high;
 			gpio = <&gpio 24 0>; /* gpio PD0 */
 			vin-supply = <&sys_3v3_reg>;
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index df7f2270fc9..efa603d47a6 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -4,6 +4,102 @@
 	compatible = "nvidia,tegra30";
 	interrupt-parent = <&intc>;
 
+	host1x {
+		compatible = "nvidia,tegra30-host1x", "simple-bus";
+		reg = <0x50000000 0x00024000>;
+		interrupts = <0 65 0x04   /* mpcore syncpt */
+			      0 67 0x04>; /* mpcore general */
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0x54000000 0x54000000 0x04000000>;
+
+		mpe {
+			compatible = "nvidia,tegra30-mpe";
+			reg = <0x54040000 0x00040000>;
+			interrupts = <0 68 0x04>;
+		};
+
+		vi {
+			compatible = "nvidia,tegra30-vi";
+			reg = <0x54080000 0x00040000>;
+			interrupts = <0 69 0x04>;
+		};
+
+		epp {
+			compatible = "nvidia,tegra30-epp";
+			reg = <0x540c0000 0x00040000>;
+			interrupts = <0 70 0x04>;
+		};
+
+		isp {
+			compatible = "nvidia,tegra30-isp";
+			reg = <0x54100000 0x00040000>;
+			interrupts = <0 71 0x04>;
+		};
+
+		gr2d {
+			compatible = "nvidia,tegra30-gr2d";
+			reg = <0x54140000 0x00040000>;
+			interrupts = <0 72 0x04>;
+		};
+
+		gr3d {
+			compatible = "nvidia,tegra30-gr3d";
+			reg = <0x54180000 0x00040000>;
+		};
+
+		dc@54200000 {
+			compatible = "nvidia,tegra30-dc";
+			reg = <0x54200000 0x00040000>;
+			interrupts = <0 73 0x04>;
+
+			rgb {
+				status = "disabled";
+			};
+		};
+
+		dc@54240000 {
+			compatible = "nvidia,tegra30-dc";
+			reg = <0x54240000 0x00040000>;
+			interrupts = <0 74 0x04>;
+
+			rgb {
+				status = "disabled";
+			};
+		};
+
+		hdmi {
+			compatible = "nvidia,tegra30-hdmi";
+			reg = <0x54280000 0x00040000>;
+			interrupts = <0 75 0x04>;
+			status = "disabled";
+		};
+
+		tvo {
+			compatible = "nvidia,tegra30-tvo";
+			reg = <0x542c0000 0x00040000>;
+			interrupts = <0 76 0x04>;
+			status = "disabled";
+		};
+
+		dsi {
+			compatible = "nvidia,tegra30-dsi";
+			reg = <0x54300000 0x00040000>;
+			status = "disabled";
+		};
+	};
+
+	cache-controller@50043000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x50043000 0x1000>;
+		arm,data-latency = <6 6 2>;
+		arm,tag-latency = <5 5 2>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
 	intc: interrupt-controller {
 		compatible = "arm,cortex-a9-gic";
 		reg = <0x50041000 0x1000
@@ -168,6 +264,66 @@
 		status = "disabled";
 	};
 
+	spi@7000d400 {
+		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		reg = <0x7000d400 0x200>;
+		interrupts = <0 59 0x04>;
+		nvidia,dma-request-selector = <&apbdma 15>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi@7000d600 {
+		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		reg = <0x7000d600 0x200>;
+		interrupts = <0 82 0x04>;
+		nvidia,dma-request-selector = <&apbdma 16>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi@7000d800 {
+		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		reg = <0x7000d480 0x200>;
+		interrupts = <0 83 0x04>;
+		nvidia,dma-request-selector = <&apbdma 17>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi@7000da00 {
+		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		reg = <0x7000da00 0x200>;
+		interrupts = <0 93 0x04>;
+		nvidia,dma-request-selector = <&apbdma 18>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi@7000dc00 {
+		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		reg = <0x7000dc00 0x200>;
+		interrupts = <0 94 0x04>;
+		nvidia,dma-request-selector = <&apbdma 27>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi@7000de00 {
+		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		reg = <0x7000de00 0x200>;
+		interrupts = <0 79 0x04>;
+		nvidia,dma-request-selector = <&apbdma 28>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
 	pmc {
 		compatible = "nvidia,tegra20-pmc", "nvidia,tegra30-pmc";
 		reg = <0x7000e400 0x400>;
diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi
index ff000172c93..63411b03693 100644
--- a/arch/arm/boot/dts/twl4030.dtsi
+++ b/arch/arm/boot/dts/twl4030.dtsi
@@ -37,6 +37,24 @@
 		regulator-max-microvolt = <3150000>;
 	};
 
+	vusb1v5: regulator-vusb1v5 {
+		compatible = "ti,twl4030-vusb1v5";
+	};
+
+	vusb1v8: regulator-vusb1v8 {
+		compatible = "ti,twl4030-vusb1v8";
+	};
+
+	vusb3v1: regulator-vusb3v1 {
+		compatible = "ti,twl4030-vusb3v1";
+	};
+
+	vsim: regulator-vsim {
+		compatible = "ti,twl4030-vsim";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
 	twl_gpio: gpio {
 		compatible = "ti,twl4030-gpio";
 		gpio-controller;
@@ -44,4 +62,13 @@
 		interrupt-controller;
 		#interrupt-cells = <1>;
 	};
+
+	twl4030-usb {
+		compatible = "ti,twl4030-usb";
+		interrupts = <10>, <4>;
+		usb1v5-supply = <&vusb1v5>;
+		usb1v8-supply = <&vusb1v8>;
+		usb3v1-supply = <&vusb3v1>;
+		usb_mode = <1>;
+	};
 };
diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi
index 123e2c40218..9996cfc5ee8 100644
--- a/arch/arm/boot/dts/twl6030.dtsi
+++ b/arch/arm/boot/dts/twl6030.dtsi
@@ -86,4 +86,9 @@
 	clk32kg: regulator-clk32kg {
 		compatible = "ti,twl6030-clk32kg";
 	};
+
+	twl_usb_comparator: usb-comparator {
+		compatible = "ti,twl6030-usb";
+		interrupts = <4>, <10>;
+	};
 };
diff --git a/arch/arm/boot/dts/u9540.dts b/arch/arm/boot/dts/u9540.dts
new file mode 100644
index 00000000000..95892ec6c34
--- /dev/null
+++ b/arch/arm/boot/dts/u9540.dts
@@ -0,0 +1,72 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "dbx5x0.dtsi"
+
+/ {
+	model = "ST-Ericsson U9540 platform with Device Tree";
+	compatible = "st-ericsson,u9540";
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	soc-u9500 {
+		uart@80120000 {
+			status = "okay";
+		};
+
+		uart@80121000 {
+			status = "okay";
+		};
+
+		uart@80007000 {
+			status = "okay";
+		};
+
+		// External Micro SD slot
+		sdi0_per1@80126000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <4>;
+			mmc-cap-sd-highspeed;
+			mmc-cap-mmc-highspeed;
+			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+
+			cd-gpios  = <&gpio7 6 0x4>; // 230
+			cd-inverted;
+
+			status = "okay";
+		};
+
+
+		// WLAN SDIO channel
+		sdi1_per2@80118000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <4>;
+
+			status = "okay";
+		};
+
+		// On-board eMMC
+		sdi4_per2@80114000 {
+			arm,primecell-periphid = <0x10480180>;
+		        max-frequency = <100000000>;
+			bus-width = <8>;
+			mmc-cap-mmc-highspeed;
+			vmmc-supply = <&ab8500_ldo_aux2_reg>;
+
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
new file mode 100644
index 00000000000..401c1262d4e
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -0,0 +1,166 @@
+/*
+ *  Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "xlnx,zynq-7000";
+
+	amba {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&intc>;
+		ranges;
+
+		intc: interrupt-controller@f8f01000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0xF8F01000 0x1000>,
+			      <0xF8F00100 0x100>;
+		};
+
+		L2: cache-controller {
+			compatible = "arm,pl310-cache";
+			reg = <0xF8F02000 0x1000>;
+			arm,data-latency = <2 3 2>;
+			arm,tag-latency = <2 3 2>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		uart0: uart@e0000000 {
+			compatible = "xlnx,xuartps";
+			reg = <0xE0000000 0x1000>;
+			interrupts = <0 27 4>;
+			clock = <50000000>;
+		};
+
+		uart1: uart@e0001000 {
+			compatible = "xlnx,xuartps";
+			reg = <0xE0001000 0x1000>;
+			interrupts = <0 50 4>;
+			clock = <50000000>;
+		};
+
+		slcr: slcr@f8000000 {
+			compatible = "xlnx,zynq-slcr";
+			reg = <0xF8000000 0x1000>;
+
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ps_clk: ps_clk {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					/* clock-frequency set in board-specific file */
+					clock-output-names = "ps_clk";
+				};
+				armpll: armpll {
+					#clock-cells = <0>;
+					compatible = "xlnx,zynq-pll";
+					clocks = <&ps_clk>;
+					reg = <0x100 0x110>;
+					clock-output-names = "armpll";
+				};
+				ddrpll: ddrpll {
+					#clock-cells = <0>;
+					compatible = "xlnx,zynq-pll";
+					clocks = <&ps_clk>;
+					reg = <0x104 0x114>;
+					clock-output-names = "ddrpll";
+				};
+				iopll: iopll {
+					#clock-cells = <0>;
+					compatible = "xlnx,zynq-pll";
+					clocks = <&ps_clk>;
+					reg = <0x108 0x118>;
+					clock-output-names = "iopll";
+				};
+				uart_clk: uart_clk {
+					#clock-cells = <1>;
+					compatible = "xlnx,zynq-periph-clock";
+					clocks = <&iopll &armpll &ddrpll>;
+					reg = <0x154>;
+					clock-output-names = "uart0_ref_clk",
+							     "uart1_ref_clk";
+				};
+				cpu_clk: cpu_clk {
+					#clock-cells = <1>;
+					compatible = "xlnx,zynq-cpu-clock";
+					clocks = <&iopll &armpll &ddrpll>;
+					reg = <0x120 0x1C4>;
+					clock-output-names = "cpu_6x4x",
+							     "cpu_3x2x",
+							     "cpu_2x",
+							     "cpu_1x";
+				};
+			};
+		};
+
+		ttc0: ttc0@f8001000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "xlnx,ttc";
+			reg = <0xF8001000 0x1000>;
+			clocks = <&cpu_clk 3>;
+			clock-names = "cpu_1x";
+			clock-ranges;
+
+			ttc0_0: ttc0.0 {
+				status = "disabled";
+				reg = <0>;
+				interrupts = <0 10 4>;
+			};
+			ttc0_1: ttc0.1 {
+				status = "disabled";
+				reg = <1>;
+				interrupts = <0 11 4>;
+			};
+			ttc0_2: ttc0.2 {
+				status = "disabled";
+				reg = <2>;
+				interrupts = <0 12 4>;
+			};
+		};
+
+		ttc1: ttc1@f8002000 {
+			#interrupt-parent = <&intc>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "xlnx,ttc";
+			reg = <0xF8002000 0x1000>;
+			clocks = <&cpu_clk 3>;
+			clock-names = "cpu_1x";
+			clock-ranges;
+
+			ttc1_0: ttc1.0 {
+				status = "disabled";
+				reg = <0>;
+				interrupts = <0 37 4>;
+			};
+			ttc1_1: ttc1.1 {
+				status = "disabled";
+				reg = <1>;
+				interrupts = <0 38 4>;
+			};
+			ttc1_2: ttc1.2 {
+				status = "disabled";
+				reg = <2>;
+				interrupts = <0 39 4>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/zynq-ep107.dts b/arch/arm/boot/dts/zynq-ep107.dts
deleted file mode 100644
index 37ca192fb19..00000000000
--- a/arch/arm/boot/dts/zynq-ep107.dts
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- *  Copyright (C) 2011 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-/ {
-	model = "Xilinx Zynq EP107";
-	compatible = "xlnx,zynq-ep107";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&intc>;
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyPS0,9600 root=/dev/ram rw initrd=0x800000,8M earlyprintk";
-		linux,stdout-path = &uart0;
-	};
-
-	amba {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		intc: interrupt-controller@f8f01000 {
-			interrupt-controller;
-			compatible = "arm,gic";
-			reg = <0xF8F01000 0x1000>;
-			#interrupt-cells = <2>;
-		};
-
-		uart0: uart@e0000000 {
-			compatible = "xlnx,xuartps";
-			reg = <0xE0000000 0x1000>;
-			interrupts = <59 0>;
-			clock = <50000000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
new file mode 100644
index 00000000000..c772942a399
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -0,0 +1,44 @@
+/*
+ *  Copyright (C) 2011 Xilinx
+ *  Copyright (C) 2012 National Instruments Corp.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+	model = "Zynq ZC702 Development Board";
+	compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyPS1,115200 earlyprintk";
+	};
+
+};
+
+&ps_clk {
+	clock-frequency = <33333330>;
+};
+
+&ttc0_0 {
+	status = "ok";
+	compatible = "xlnx,ttc-counter-clocksource";
+};
+
+&ttc0_1 {
+	status = "ok";
+	compatible = "xlnx,ttc-counter-clockevent";
+};
diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig
index 40db34cf277..0b7ee92c571 100644
--- a/arch/arm/configs/dove_defconfig
+++ b/arch/arm/configs/dove_defconfig
@@ -8,11 +8,19 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_DOVE=y
 CONFIG_MACH_DOVE_DB=y
+CONFIG_MACH_CM_A510=y
+CONFIG_MACH_DOVE_DT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_HIGHMEM=y
+CONFIG_USE_OF=y
+CONFIG_ATAGS=y
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
 CONFIG_VFP=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -62,6 +70,9 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
@@ -74,6 +85,18 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_IO_ACCESSORS=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_DOVE=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_MV=y
 CONFIG_DMADEVICES=y
@@ -122,6 +145,7 @@ CONFIG_CRYPTO_TWOFISH=y
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_LZO=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_DEV_MV_CESA=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
 CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index 78ed575feb1..f71302c3ac3 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -18,7 +18,9 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_MXC=y
-CONFIG_ARCH_IMX_V4_V5=y
+CONFIG_ARCH_MULTI_V4T=y
+CONFIG_ARCH_MULTI_V5=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_MX1ADS=y
 CONFIG_MACH_SCB9328=y
 CONFIG_MACH_APF9328=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 394ded624e3..44f117aab52 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -17,6 +17,8 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_MXC=y
+CONFIG_ARCH_MULTI_V6=y
+CONFIG_ARCH_MULTI_V7=y
 CONFIG_MACH_MX31LILLY=y
 CONFIG_MACH_MX31LITE=y
 CONFIG_MACH_PCM037=y
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index 74eee0c78f2..93f3794ba5c 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -27,6 +27,14 @@ CONFIG_MACH_GOFLEXNET_DT=y
 CONFIG_MACH_LSXL_DT=y
 CONFIG_MACH_IOMEGA_IX2_200_DT=y
 CONFIG_MACH_KM_KIRKWOOD_DT=y
+CONFIG_MACH_INETSPACE_V2_DT=y
+CONFIG_MACH_MPLCEC4_DT=y
+CONFIG_MACH_NETSPACE_V2_DT=y
+CONFIG_MACH_NETSPACE_MAX_V2_DT=y
+CONFIG_MACH_NETSPACE_LITE_V2_DT=y
+CONFIG_MACH_NETSPACE_MINI_V2_DT=y
+CONFIG_MACH_OPENBLOCKS_A6_DT=y
+CONFIG_MACH_TOPKICK_DT=y
 CONFIG_MACH_TS219=y
 CONFIG_MACH_TS41X=y
 CONFIG_MACH_DOCKSTAR=y
@@ -40,6 +48,7 @@ CONFIG_MACH_D2NET_V2=y
 CONFIG_MACH_NET2BIG_V2=y
 CONFIG_MACH_NET5BIG_V2=y
 CONFIG_MACH_T5325=y
+CONFIG_MACH_NSA310_DT=y
 # CONFIG_CPU_FEROCEON_OLD_ID is not set
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index 048aaca6081..7bf535104e2 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -61,6 +61,8 @@ CONFIG_MTD_NAND_GPMI_NAND=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_ENC28J60=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_SMSC95XX=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
@@ -158,6 +160,10 @@ CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_15=y
 CONFIG_PRINTK_TIME=y
 CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index cd5e6ba9a54..952430d9e2d 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -1,7 +1,8 @@
 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_EXPERT=y
 # CONFIG_SLUB_DEBUG is not set
 CONFIG_PROFILING=y
@@ -10,6 +11,8 @@ CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_BSD_DISKLABEL=y
 CONFIG_ARCH_ORION5X=y
 CONFIG_MACH_DB88F5281=y
 CONFIG_MACH_RD88F5182=y
@@ -24,7 +27,7 @@ CONFIG_MACH_TS409=y
 CONFIG_MACH_WRT350N_V2=y
 CONFIG_MACH_TS78XX=y
 CONFIG_MACH_MV2120=y
-CONFIG_MACH_EDMINI_V2=y
+CONFIG_MACH_EDMINI_V2_DT=y
 CONFIG_MACH_D2NET=y
 CONFIG_MACH_BIGDISK=y
 CONFIG_MACH_NET2BIG=y
@@ -33,17 +36,13 @@ CONFIG_MACH_WNR854T=y
 CONFIG_MACH_RD88F5181L_GE=y
 CONFIG_MACH_RD88F5181L_FXO=y
 CONFIG_MACH_RD88F6183AP_GE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
 CONFIG_FPE_NWFPE=y
 CONFIG_VFP=y
-# CONFIG_SUSPEND is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -54,13 +53,10 @@ CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IPV6 is not set
 CONFIG_NET_DSA=y
-CONFIG_NET_DSA_MV88E6131=y
-CONFIG_NET_DSA_MV88E6123_61_65=y
 CONFIG_NET_PKTGEN=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FIRMWARE_IN_KERNEL is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
@@ -82,12 +78,11 @@ CONFIG_CHR_DEV_SG=m
 CONFIG_ATA=y
 CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
-CONFIG_MARVELL_PHY=y
-CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-CONFIG_NET_PCI=y
+CONFIG_NET_DSA_MV88E6131=y
+CONFIG_NET_DSA_MV88E6123_61_65=y
 CONFIG_MV643XX_ETH=y
-# CONFIG_NETDEV_10000 is not set
+CONFIG_MARVELL_PHY=y
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
@@ -95,11 +90,12 @@ CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
+CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_LEGACY_PTY_COUNT=16
+CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_HW_RANDOM_TIMERIOMEM=m
 CONFIG_I2C=y
 # CONFIG_I2C_COMPAT is not set
@@ -109,10 +105,8 @@ CONFIG_GPIO_SYSFS=y
 CONFIG_SENSORS_LM75=y
 # CONFIG_VGA_ARB is not set
 CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
 CONFIG_USB_PRINTER=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_STORAGE_DATAFAB=y
@@ -140,7 +134,6 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_EXT4_FS=m
-CONFIG_INOTIFY=y
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_UDF_FS=m
@@ -150,25 +143,18 @@ CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_CRAMFS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_LATENCYTOP=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
 CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_ECB=m
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index da6845493ca..6fe7ede6f0c 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -76,6 +76,7 @@ CONFIG_AB8500_CORE=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_AB8500=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_GPIO=y
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB_GADGET=y
 CONFIG_AB8500_USB=y
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index 23004847bb0..8ea02ac3ec1 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -211,13 +211,6 @@ static inline void dma_free_writecombine(struct device *dev, size_t size,
 extern void __init init_dma_coherent_pool_size(unsigned long size);
 
 /*
- * This can be called during boot to increase the size of the consistent
- * DMA region above it's default value of 2MB. It must be called before the
- * memory allocator is initialised, i.e. before any core_initcall.
- */
-static inline void init_consistent_dma_size(unsigned long size) { }
-
-/*
  * For SA-1111, IXP425, and ADI systems  the dma-mapping functions are "magic"
  * and utilize bounce buffers as needed to work around limited DMA windows.
  *
diff --git a/arch/arm/include/debug/imx.S b/arch/arm/include/debug/imx.S
new file mode 100644
index 00000000000..0c4e17d4d35
--- /dev/null
+++ b/arch/arm/include/debug/imx.S
@@ -0,0 +1,74 @@
+/* arch/arm/mach-imx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#define IMX6Q_UART1_BASE_ADDR	0x02020000
+#define IMX6Q_UART2_BASE_ADDR	0x021e8000
+#define IMX6Q_UART3_BASE_ADDR	0x021ec000
+#define IMX6Q_UART4_BASE_ADDR	0x021f0000
+#define IMX6Q_UART5_BASE_ADDR	0x021f4000
+
+/*
+ * IMX6Q_UART_BASE_ADDR is put in the middle to force the expansion
+ * of IMX6Q_UART##n##_BASE_ADDR.
+ */
+#define IMX6Q_UART_BASE_ADDR(n)	IMX6Q_UART##n##_BASE_ADDR
+#define IMX6Q_UART_BASE(n)	IMX6Q_UART_BASE_ADDR(n)
+#define IMX6Q_DEBUG_UART_BASE	IMX6Q_UART_BASE(CONFIG_DEBUG_IMX6Q_UART_PORT)
+
+#ifdef CONFIG_DEBUG_IMX1_UART
+#define UART_PADDR	0x00206000
+#elif defined (CONFIG_DEBUG_IMX25_UART)
+#define UART_PADDR	0x43f90000
+#elif defined (CONFIG_DEBUG_IMX21_IMX27_UART)
+#define UART_PADDR	0x1000a000
+#elif defined (CONFIG_DEBUG_IMX31_IMX35_UART)
+#define UART_PADDR	0x43f90000
+#elif defined (CONFIG_DEBUG_IMX51_UART)
+#define UART_PADDR	0x73fbc000
+#elif defined (CONFIG_DEBUG_IMX50_IMX53_UART)
+#define UART_PADDR	0x53fbc000
+#elif defined (CONFIG_DEBUG_IMX6Q_UART)
+#define UART_PADDR	IMX6Q_DEBUG_UART_BASE
+#endif
+
+/*
+ * FIXME: This is a copy of IMX_IO_P2V in hardware.h, and needs to
+ * stay sync with that.  It's hard to maintain, and should be fixed
+ * globally for multi-platform build to use a fixed virtual address
+ * for low-level debug uart port across platforms.
+ */
+#define IMX_IO_P2V(x)	(						\
+			(((x) & 0x80000000) >> 7) |			\
+			(0xf4000000 +					\
+			(((x) & 0x50000000) >> 6) +			\
+			(((x) & 0x0b000000) >> 4) +			\
+			(((x) & 0x000fffff))))
+
+#define UART_VADDR	IMX_IO_P2V(UART_PADDR)
+
+		.macro	addruart, rp, rv, tmp
+		ldr	\rp, =UART_PADDR	@ physical
+		ldr	\rv, =UART_VADDR	@ virtual
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0x40]	@ TXDATA
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		ldr	\rd, [\rx, #0x98]	@ SR2
+		tst	\rd, #1 << 3		@ TXDC
+		beq	1002b			@ wait until transmit done
+		.endm
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 84af1b506d9..b7ae124c16e 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -343,7 +343,6 @@ static struct at91_gpio_bank at91sam9g45_gpio[] __initdata = {
 static void __init at91sam9g45_map_io(void)
 {
 	at91_init_sram(0, AT91SAM9G45_SRAM_BASE, AT91SAM9G45_SRAM_SIZE);
-	init_consistent_dma_size(SZ_4M);
 }
 
 static void __init at91sam9g45_ioremap_registers(void)
diff --git a/arch/arm/mach-at91/include/mach/atmel-mci.h b/arch/arm/mach-at91/include/mach/atmel-mci.h
index cd580a12e90..3069e413557 100644
--- a/arch/arm/mach-at91/include/mach/atmel-mci.h
+++ b/arch/arm/mach-at91/include/mach/atmel-mci.h
@@ -14,11 +14,4 @@ struct mci_dma_data {
 #define	slave_data_ptr(s)	(&(s)->sdata)
 #define find_slave_dev(s)	((s)->sdata.dma_dev)
 
-#define	setup_dma_addr(s, t, r)	do {		\
-	if (s) {				\
-		(s)->sdata.tx_reg = (t);	\
-		(s)->sdata.rx_reg = (r);	\
-	}					\
-} while (0)
-
 #endif /* __MACH_ATMEL_MCI_H */
diff --git a/arch/arm/mach-bcm2835/Makefile.boot b/arch/arm/mach-bcm2835/Makefile.boot
index 2d30e17f5b6..b3271754e9f 100644
--- a/arch/arm/mach-bcm2835/Makefile.boot
+++ b/arch/arm/mach-bcm2835/Makefile.boot
@@ -1,3 +1 @@
-   zreladdr-y := 0x00008000
-params_phys-y := 0x00000100
-initrd_phys-y := 0x00800000
+zreladdr-y := 0x00008000
diff --git a/arch/arm/mach-bcm2835/bcm2835.c b/arch/arm/mach-bcm2835/bcm2835.c
index f6fea493357..53e3842c933 100644
--- a/arch/arm/mach-bcm2835/bcm2835.c
+++ b/arch/arm/mach-bcm2835/bcm2835.c
@@ -30,12 +30,12 @@ static struct map_desc io_map __initdata = {
 	.type = MT_DEVICE
 };
 
-void __init bcm2835_map_io(void)
+static void __init bcm2835_map_io(void)
 {
 	iotable_init(&io_map, 1);
 }
 
-void __init bcm2835_init(void)
+static void __init bcm2835_init(void)
 {
 	int ret;
 
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index f8eecb95941..0153950f606 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -58,6 +58,14 @@ config ARCH_DAVINCI_TNETV107X
 
 comment "DaVinci Board Type"
 
+config MACH_DA8XX_DT
+	bool "Support DA8XX platforms using device tree"
+	default y
+	depends on ARCH_DAVINCI_DA8XX
+	help
+	  Say y here to include support for TI DaVinci DA850 based using
+	  Flattened Device Tree. More information at Documentation/devicetree
+
 config MACH_DAVINCI_EVM
 	bool "TI DM644x EVM"
 	default ARCH_DAVINCI_DM644x
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 2227effcb0e..fb5c1aa98a6 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_AINTC)			+= irq.o
 obj-$(CONFIG_CP_INTC)			+= cp_intc.o
 
 # Board specific
+obj-$(CONFIG_MACH_DA8XX_DT)		+= da8xx-dt.o
 obj-$(CONFIG_MACH_DAVINCI_EVM)  	+= board-dm644x-evm.o
 obj-$(CONFIG_MACH_SFFSDR)		+= board-sffsdr.o
 obj-$(CONFIG_MACH_NEUROS_OSD2)		+= board-neuros-osd2.o
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 88ebea89abd..cdf8d0746e7 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -324,7 +324,7 @@ static __init void dm355_evm_init(void)
 	if (IS_ERR(aemif))
 		WARN("%s: unable to get AEMIF clock\n", __func__);
 	else
-		clk_enable(aemif);
+		clk_prepare_enable(aemif);
 
 	platform_add_devices(davinci_evm_devices,
 			     ARRAY_SIZE(davinci_evm_devices));
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index 2f88103c645..d41954507fc 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -246,7 +246,7 @@ static __init void dm355_leopard_init(void)
 	if (IS_ERR(aemif))
 		WARN("%s: unable to get AEMIF clock\n", __func__);
 	else
-		clk_enable(aemif);
+		clk_prepare_enable(aemif);
 
 	platform_add_devices(davinci_leopard_devices,
 			     ARRAY_SIZE(davinci_leopard_devices));
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 1b4a8adcfdc..5d49c75388c 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -478,7 +478,7 @@ static void __init evm_init_cpld(void)
 	aemif_clk = clk_get(NULL, "aemif");
 	if (IS_ERR(aemif_clk))
 		return;
-	clk_enable(aemif_clk);
+	clk_prepare_enable(aemif_clk);
 
 	if (request_mem_region(DM365_ASYNC_EMIF_DATA_CE1_BASE, SECTION_SIZE,
 			"cpld") == NULL)
@@ -489,7 +489,7 @@ static void __init evm_init_cpld(void)
 				SECTION_SIZE);
 fail:
 		pr_err("ERROR: can't map CPLD\n");
-		clk_disable(aemif_clk);
+		clk_disable_unprepare(aemif_clk);
 		return;
 	}
 
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index f22572cee49..a84dfcbc115 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -776,7 +776,7 @@ static __init void davinci_evm_init(void)
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
 	aemif_clk = clk_get(NULL, "aemif");
-	clk_enable(aemif_clk);
+	clk_prepare_enable(aemif_clk);
 
 	if (HAS_ATA) {
 		if (HAS_NAND || HAS_NOR)
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 1dbf85beed1..9211e8800c7 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -194,7 +194,7 @@ static int evm_led_setup(struct i2c_client *client, int gpio,
 	while (ngpio--) {
 		leds->gpio = gpio++;
 		leds++;
-	};
+	}
 
 	evm_led_dev = platform_device_alloc("leds-gpio", 0);
 	platform_device_add_data(evm_led_dev, &evm_led_data,
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 144bf31d68d..3e3e3afebf8 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -188,7 +188,7 @@ static __init void davinci_ntosd2_init(void)
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
 	aemif_clk = clk_get(NULL, "aemif");
-	clk_enable(aemif_clk);
+	clk_prepare_enable(aemif_clk);
 
 	if (HAS_ATA) {
 		if (HAS_NAND)
diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
index 64b0f65a863..a794f6d9d44 100644
--- a/arch/arm/mach-davinci/common.c
+++ b/arch/arm/mach-davinci/common.c
@@ -87,8 +87,6 @@ void __init davinci_common_init(struct davinci_soc_info *soc_info)
 		iotable_init(davinci_soc_info.io_desc,
 				davinci_soc_info.io_desc_num);
 
-	init_consistent_dma_size(14 << 20);
-
 	/*
 	 * Normally devicemaps_init() would flush caches and tlb after
 	 * mdesc->map_io(), but we must also do it here because of the CPU
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index b90c172d554..68c5fe01857 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -212,6 +212,12 @@ static struct clk tptc2_clk = {
 	.flags		= ALWAYS_ENABLED,
 };
 
+static struct clk pruss_clk = {
+	.name		= "pruss",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_PRUSS,
+};
+
 static struct clk uart0_clk = {
 	.name		= "uart0",
 	.parent		= &pll0_sysclk2,
@@ -385,6 +391,7 @@ static struct clk_lookup da850_clks[] = {
 	CLK(NULL,		"tptc1",	&tptc1_clk),
 	CLK(NULL,		"tpcc1",	&tpcc1_clk),
 	CLK(NULL,		"tptc2",	&tptc2_clk),
+	CLK("pruss_uio",	"pruss",	&pruss_clk),
 	CLK(NULL,		"uart0",	&uart0_clk),
 	CLK(NULL,		"uart1",	&uart1_clk),
 	CLK(NULL,		"uart2",	&uart2_clk),
@@ -781,12 +788,6 @@ static struct map_desc da850_io_desc[] = {
 		.length		= DA8XX_CP_INTC_SIZE,
 		.type		= MT_DEVICE
 	},
-	{
-		.virtual	= SRAM_VIRT,
-		.pfn		= __phys_to_pfn(DA8XX_ARM_RAM_BASE),
-		.length		= SZ_8K,
-		.type		= MT_DEVICE
-	},
 };
 
 static u32 da850_psc_bases[] = { DA8XX_PSC0_BASE, DA8XX_PSC1_BASE };
@@ -1239,8 +1240,8 @@ static struct davinci_soc_info davinci_soc_info_da850 = {
 	.gpio_irq		= IRQ_DA8XX_GPIO0,
 	.serial_dev		= &da8xx_serial_device,
 	.emac_pdata		= &da8xx_emac_pdata,
-	.sram_dma		= DA8XX_ARM_RAM_BASE,
-	.sram_len		= SZ_8K,
+	.sram_dma		= DA8XX_SHARED_RAM_BASE,
+	.sram_len		= SZ_128K,
 };
 
 void __init da850_init(void)
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
new file mode 100644
index 00000000000..37c27af18fa
--- /dev/null
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -0,0 +1,66 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Modified from mach-omap/omap2/board-generic.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/io.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/irqdomain.h>
+
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/cp_intc.h>
+#include <mach/da8xx.h>
+
+#define DA8XX_NUM_UARTS	3
+
+void __init da8xx_uart_clk_enable(void)
+{
+	int i;
+	for (i = 0; i < DA8XX_NUM_UARTS; i++)
+		davinci_serial_setup_clk(i, NULL);
+}
+
+static struct of_device_id da8xx_irq_match[] __initdata = {
+	{ .compatible = "ti,cp-intc", .data = cp_intc_of_init, },
+	{ }
+};
+
+static void __init da8xx_init_irq(void)
+{
+	of_irq_init(da8xx_irq_match);
+}
+
+#ifdef CONFIG_ARCH_DAVINCI_DA850
+
+static void __init da850_init_machine(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+
+	da8xx_uart_clk_enable();
+}
+
+static const char *da850_boards_compat[] __initdata = {
+	"enbw,cmc",
+	"ti,da850-evm",
+	"ti,da850",
+	NULL,
+};
+
+DT_MACHINE_START(DA850_DT, "Generic DA850/OMAP-L138/AM18x")
+	.map_io		= da850_init,
+	.init_irq	= da8xx_init_irq,
+	.timer		= &davinci_timer,
+	.init_machine	= da850_init_machine,
+	.dt_compat	= da850_boards_compat,
+	.init_late	= davinci_init_late,
+	.restart	= da8xx_restart,
+MACHINE_END
+
+#endif
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index bd2f72b414b..46c9a0c09ae 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -22,6 +22,7 @@
 #include <mach/time.h>
 #include <mach/da8xx.h>
 #include <mach/cpuidle.h>
+#include <mach/sram.h>
 
 #include "clock.h"
 #include "asp.h"
@@ -32,6 +33,7 @@
 #define DA8XX_WDOG_BASE			0x01c21000 /* DA8XX_TIMER64P1_BASE */
 #define DA8XX_I2C0_BASE			0x01c22000
 #define DA8XX_RTC_BASE			0x01c23000
+#define DA8XX_PRUSS_MEM_BASE		0x01c30000
 #define DA8XX_MMCSD0_BASE		0x01c40000
 #define DA8XX_SPI0_BASE			0x01c41000
 #define DA830_SPI1_BASE			0x01e12000
@@ -518,6 +520,75 @@ void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata)
 	}
 }
 
+static struct resource da8xx_pruss_resources[] = {
+	{
+		.start	= DA8XX_PRUSS_MEM_BASE,
+		.end	= DA8XX_PRUSS_MEM_BASE + 0xFFFF,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_DA8XX_EVTOUT0,
+		.end	= IRQ_DA8XX_EVTOUT0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_EVTOUT1,
+		.end	= IRQ_DA8XX_EVTOUT1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_EVTOUT2,
+		.end	= IRQ_DA8XX_EVTOUT2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_EVTOUT3,
+		.end	= IRQ_DA8XX_EVTOUT3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_EVTOUT4,
+		.end	= IRQ_DA8XX_EVTOUT4,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_EVTOUT5,
+		.end	= IRQ_DA8XX_EVTOUT5,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_EVTOUT6,
+		.end	= IRQ_DA8XX_EVTOUT6,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_EVTOUT7,
+		.end	= IRQ_DA8XX_EVTOUT7,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct uio_pruss_pdata da8xx_uio_pruss_pdata = {
+	.pintc_base	= 0x4000,
+};
+
+static struct platform_device da8xx_uio_pruss_dev = {
+	.name		= "pruss_uio",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(da8xx_pruss_resources),
+	.resource	= da8xx_pruss_resources,
+	.dev		= {
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &da8xx_uio_pruss_pdata,
+	}
+};
+
+int __init da8xx_register_uio_pruss(void)
+{
+	da8xx_uio_pruss_pdata.sram_pool = sram_get_gen_pool();
+	return platform_device_register(&da8xx_uio_pruss_dev);
+}
+
 static const struct display_panel disp_panel = {
 	QVGA,
 	16,
@@ -900,7 +971,7 @@ static int da850_sata_init(struct device *dev, void __iomem *addr)
 	if (IS_ERR(da850_sata_clk))
 		return PTR_ERR(da850_sata_clk);
 
-	ret = clk_enable(da850_sata_clk);
+	ret = clk_prepare_enable(da850_sata_clk);
 	if (ret)
 		goto err0;
 
@@ -931,7 +1002,7 @@ static int da850_sata_init(struct device *dev, void __iomem *addr)
 	return 0;
 
 err1:
-	clk_disable(da850_sata_clk);
+	clk_disable_unprepare(da850_sata_clk);
 err0:
 	clk_put(da850_sata_clk);
 	return ret;
@@ -939,7 +1010,7 @@ err0:
 
 static void da850_sata_exit(struct device *dev)
 {
-	clk_disable(da850_sata_clk);
+	clk_disable_unprepare(da850_sata_clk);
 	clk_put(da850_sata_clk);
 }
 
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index a255434908d..b49c3b77d55 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -758,12 +758,6 @@ static struct map_desc dm355_io_desc[] = {
 		.length		= IO_SIZE,
 		.type		= MT_DEVICE
 	},
-	{
-		.virtual	= SRAM_VIRT,
-		.pfn		= __phys_to_pfn(0x00010000),
-		.length		= SZ_32K,
-		.type		= MT_MEMORY_NONCACHED,
-	},
 };
 
 /* Contents of JTAG ID register used to identify exact cpu type */
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index b680c832e0b..6c3980540be 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -985,12 +985,6 @@ static struct map_desc dm365_io_desc[] = {
 		.length		= IO_SIZE,
 		.type		= MT_DEVICE
 	},
-	{
-		.virtual	= SRAM_VIRT,
-		.pfn		= __phys_to_pfn(0x00010000),
-		.length		= SZ_32K,
-		.type		= MT_MEMORY_NONCACHED,
-	},
 };
 
 static struct resource dm365_ks_resources[] = {
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index cd0c8b1e1ec..11c79a3362e 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -713,8 +713,7 @@ static int dm644x_venc_setup_clock(enum vpbe_enc_timings_type type,
 		break;
 	case VPBE_ENC_CUSTOM_TIMINGS:
 		if (pclock <= 27000000) {
-			v |= DM644X_VPSS_MUXSEL_PLL2_MODE |
-			     DM644X_VPSS_DACCLKEN;
+			v |= DM644X_VPSS_DACCLKEN;
 			writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL));
 		} else {
 			/*
@@ -786,12 +785,6 @@ static struct map_desc dm644x_io_desc[] = {
 		.length		= IO_SIZE,
 		.type		= MT_DEVICE
 	},
-	{
-		.virtual	= SRAM_VIRT,
-		.pfn		= __phys_to_pfn(0x00008000),
-		.length		= SZ_16K,
-		.type		= MT_MEMORY_NONCACHED,
-	},
 };
 
 /* Contents of JTAG ID register used to identify exact cpu type */
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 97c0f8e555b..ac7b431c4c8 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -756,12 +756,6 @@ static struct map_desc dm646x_io_desc[] = {
 		.length		= IO_SIZE,
 		.type		= MT_DEVICE
 	},
-	{
-		.virtual	= SRAM_VIRT,
-		.pfn		= __phys_to_pfn(0x00010000),
-		.length		= SZ_32K,
-		.type		= MT_MEMORY_NONCACHED,
-	},
 };
 
 /* Contents of JTAG ID register used to identify exact cpu type */
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index bdc4aa8e672..046c7238a3d 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -104,8 +104,6 @@ int davinci_pm_init(void);
 static inline int davinci_pm_init(void) { return 0; }
 #endif
 
-/* standard place to map on-chip SRAMs; they *may* support DMA */
-#define SRAM_VIRT	0xfffe0000
 #define SRAM_SIZE	SZ_128K
 
 #endif /* __ARCH_ARM_MACH_DAVINCI_COMMON_H */
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index aaccdc4528f..700d311c685 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -26,6 +26,7 @@
 #include <linux/platform_data/mmc-davinci.h>
 #include <linux/platform_data/usb-davinci.h>
 #include <linux/platform_data/spi-davinci.h>
+#include <linux/platform_data/uio_pruss.h>
 
 #include <media/davinci/vpif_types.h>
 
@@ -72,6 +73,7 @@ extern unsigned int da850_max_speed;
 #define DA8XX_AEMIF_CS2_BASE	0x60000000
 #define DA8XX_AEMIF_CS3_BASE	0x62000000
 #define DA8XX_AEMIF_CTL_BASE	0x68000000
+#define DA8XX_SHARED_RAM_BASE	0x80000000
 #define DA8XX_ARM_RAM_BASE	0xffff0000
 
 void __init da830_init(void);
@@ -86,6 +88,7 @@ int da8xx_register_watchdog(void);
 int da8xx_register_usb20(unsigned mA, unsigned potpgt);
 int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata);
 int da8xx_register_emac(void);
+int da8xx_register_uio_pruss(void);
 int da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata);
 int da8xx_register_mmcsd0(struct davinci_mmc_config *config);
 int da850_register_mmcsd1(struct davinci_mmc_config *config);
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
index 46b3cd11c3c..2d9d921e8b0 100644
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -43,6 +43,7 @@ struct davinci_uart_config {
 };
 
 extern int davinci_serial_init(struct davinci_uart_config *);
+extern int davinci_serial_setup_clk(unsigned instance, unsigned int *rate);
 #endif
 
 #endif /* __ASM_ARCH_SERIAL_H */
diff --git a/arch/arm/mach-davinci/include/mach/sram.h b/arch/arm/mach-davinci/include/mach/sram.h
index 111f7cc71e0..4e5db56218b 100644
--- a/arch/arm/mach-davinci/include/mach/sram.h
+++ b/arch/arm/mach-davinci/include/mach/sram.h
@@ -24,4 +24,7 @@
 extern void *sram_alloc(size_t len, dma_addr_t *dma);
 extern void sram_free(void *addr, size_t len);
 
+/* Get the struct gen_pool * for use in platform data */
+extern struct gen_pool *sram_get_gen_pool(void);
+
 #endif /* __MACH_SRAM_H */
diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c
index 1875740fe27..f2625814c3c 100644
--- a/arch/arm/mach-davinci/serial.c
+++ b/arch/arm/mach-davinci/serial.c
@@ -70,11 +70,33 @@ static void __init davinci_serial_reset(struct plat_serial8250_port *p)
 				 UART_DM646X_SCR_TX_WATERMARK);
 }
 
-int __init davinci_serial_init(struct davinci_uart_config *info)
+/* Enable UART clock and obtain its rate */
+int __init davinci_serial_setup_clk(unsigned instance, unsigned int *rate)
 {
-	int i;
 	char name[16];
-	struct clk *uart_clk;
+	struct clk *clk;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	struct device *dev = &soc_info->serial_dev->dev;
+
+	sprintf(name, "uart%d", instance);
+	clk = clk_get(dev, name);
+	if (IS_ERR(clk)) {
+		pr_err("%s:%d: failed to get UART%d clock\n",
+					__func__, __LINE__, instance);
+		return PTR_ERR(clk);
+	}
+
+	clk_prepare_enable(clk);
+
+	if (rate)
+		*rate = clk_get_rate(clk);
+
+	return 0;
+}
+
+int __init davinci_serial_init(struct davinci_uart_config *info)
+{
+	int i, ret;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 	struct device *dev = &soc_info->serial_dev->dev;
 	struct plat_serial8250_port *p = dev->platform_data;
@@ -87,16 +109,9 @@ int __init davinci_serial_init(struct davinci_uart_config *info)
 		if (!(info->enabled_uarts & (1 << i)))
 			continue;
 
-		sprintf(name, "uart%d", i);
-		uart_clk = clk_get(dev, name);
-		if (IS_ERR(uart_clk)) {
-			printk(KERN_ERR "%s:%d: failed to get UART%d clock\n",
-					__func__, __LINE__, i);
+		ret = davinci_serial_setup_clk(i, &p->uartclk);
+		if (ret)
 			continue;
-		}
-
-		clk_enable(uart_clk);
-		p->uartclk = clk_get_rate(uart_clk);
 
 		if (!p->membase && p->mapbase) {
 			p->membase = ioremap(p->mapbase, SZ_4K);
diff --git a/arch/arm/mach-davinci/sram.c b/arch/arm/mach-davinci/sram.c
index db0f7787faf..c5f7ee5cc80 100644
--- a/arch/arm/mach-davinci/sram.c
+++ b/arch/arm/mach-davinci/sram.c
@@ -10,6 +10,7 @@
  */
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/io.h>
 #include <linux/genalloc.h>
 
 #include <mach/common.h>
@@ -17,6 +18,11 @@
 
 static struct gen_pool *sram_pool;
 
+struct gen_pool *sram_get_gen_pool(void)
+{
+	return sram_pool;
+}
+
 void *sram_alloc(size_t len, dma_addr_t *dma)
 {
 	unsigned long vaddr;
@@ -32,7 +38,7 @@ void *sram_alloc(size_t len, dma_addr_t *dma)
 		return NULL;
 
 	if (dma)
-		*dma = dma_base + (vaddr - SRAM_VIRT);
+		*dma = gen_pool_virt_to_phys(sram_pool, vaddr);
 	return (void *)vaddr;
 
 }
@@ -53,8 +59,10 @@ EXPORT_SYMBOL(sram_free);
  */
 static int __init sram_init(void)
 {
+	phys_addr_t phys = davinci_soc_info.sram_dma;
 	unsigned len = davinci_soc_info.sram_len;
 	int status = 0;
+	void *addr;
 
 	if (len) {
 		len = min_t(unsigned, len, SRAM_SIZE);
@@ -62,8 +70,17 @@ static int __init sram_init(void)
 		if (!sram_pool)
 			status = -ENOMEM;
 	}
-	if (sram_pool)
-		status = gen_pool_add(sram_pool, SRAM_VIRT, len, -1);
+
+	if (sram_pool) {
+		addr = ioremap(phys, len);
+		if (!addr)
+			return -ENOMEM;
+		status = gen_pool_add_virt(sram_pool, (unsigned)addr,
+					   phys, len, -1);
+		if (status < 0)
+			iounmap(addr);
+	}
+
 	WARN_ON(status < 0);
 	return status;
 }
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 75da315b658..9847938785c 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -379,7 +379,7 @@ static void __init davinci_timer_init(void)
 
 	timer_clk = clk_get(NULL, "timer0");
 	BUG_ON(IS_ERR(timer_clk));
-	clk_enable(timer_clk);
+	clk_prepare_enable(timer_clk);
 
 	/* init timer hw */
 	timer_init();
@@ -429,7 +429,7 @@ void davinci_watchdog_reset(struct platform_device *pdev)
 	wd_clk = clk_get(&pdev->dev, NULL);
 	if (WARN_ON(IS_ERR(wd_clk)))
 		return;
-	clk_enable(wd_clk);
+	clk_prepare_enable(wd_clk);
 
 	/* disable, internal clock source */
 	__raw_writel(0, base + TCR);
diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
index f77b95336e2..34509ffba22 100644
--- a/arch/arm/mach-davinci/usb.c
+++ b/arch/arm/mach-davinci/usb.c
@@ -42,14 +42,8 @@ static struct musb_hdrc_config musb_config = {
 };
 
 static struct musb_hdrc_platform_data usb_data = {
-#if defined(CONFIG_USB_MUSB_OTG)
 	/* OTG requires a Mini-AB connector */
 	.mode           = MUSB_OTG,
-#elif defined(CONFIG_USB_MUSB_PERIPHERAL)
-	.mode           = MUSB_PERIPHERAL,
-#elif defined(CONFIG_USB_MUSB_HOST)
-	.mode           = MUSB_HOST,
-#endif
 	.clock		= "usb",
 	.config		= &musb_config,
 };
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index da55107033d..bb3b09aa918 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -63,6 +63,7 @@ config SOC_EXYNOS5250
 	depends on ARCH_EXYNOS5
 	select S5P_PM if PM
 	select S5P_SLEEP if PM
+	select S5P_DEV_MFC
 	select SAMSUNG_DMADEV
 	help
 	  Enable EXYNOS5250 SoC support
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 9b58024f7d4..1797dee88a0 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -53,7 +53,6 @@ obj-$(CONFIG_EXYNOS4_DEV_AHCI)		+= dev-ahci.o
 obj-$(CONFIG_EXYNOS4_DEV_DWMCI)		+= dev-dwmci.o
 obj-$(CONFIG_EXYNOS_DEV_DMA)		+= dma.o
 obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI)	+= dev-ohci.o
-obj-$(CONFIG_EXYNOS_DEV_DRM)		+= dev-drm.o
 obj-$(CONFIG_EXYNOS_DEV_SYSMMU)		+= dev-sysmmu.o
 
 obj-$(CONFIG_ARCH_EXYNOS)		+= setup-i2c0.o
diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c
index 6a45c9a9abe..efead60b943 100644
--- a/arch/arm/mach-exynos/clock-exynos4.c
+++ b/arch/arm/mach-exynos/clock-exynos4.c
@@ -576,6 +576,10 @@ static struct clk exynos4_init_clocks_off[] = {
 		.enable		= exynos4_clk_ip_peril_ctrl,
 		.ctrlbit	= (1 << 15),
 	}, {
+		.name		= "tmu_apbif",
+		.enable		= exynos4_clk_ip_perir_ctrl,
+		.ctrlbit	= (1 << 17),
+	}, {
 		.name		= "keypad",
 		.enable		= exynos4_clk_ip_perir_ctrl,
 		.ctrlbit	= (1 << 16),
@@ -613,11 +617,6 @@ static struct clk exynos4_init_clocks_off[] = {
 		.ctrlbit	= (1 << 18),
 	}, {
 		.name		= "iis",
-		.devname	= "samsung-i2s.0",
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 19),
-	}, {
-		.name		= "iis",
 		.devname	= "samsung-i2s.1",
 		.enable		= exynos4_clk_ip_peril_ctrl,
 		.ctrlbit	= (1 << 20),
diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c
index c44ca1ee1b8..7652f5d78a5 100644
--- a/arch/arm/mach-exynos/clock-exynos5.c
+++ b/arch/arm/mach-exynos/clock-exynos5.c
@@ -196,6 +196,11 @@ static int exynos5_clk_ip_isp1_ctrl(struct clk *clk, int enable)
 	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ISP1, clk, enable);
 }
 
+static int exynos5_clk_hdmiphy_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
+}
+
 /* Core list of CMU_CPU side */
 
 static struct clksrc_clk exynos5_clk_mout_apll = {
@@ -292,7 +297,7 @@ static struct clksrc_sources exynos5_clk_src_mpll = {
 	.nr_sources	= ARRAY_SIZE(exynos5_clk_src_mpll_list),
 };
 
-struct clksrc_clk exynos5_clk_mout_mpll = {
+static struct clksrc_clk exynos5_clk_mout_mpll = {
 	.clk = {
 		.name		= "mout_mpll",
 	},
@@ -467,12 +472,12 @@ static struct clksrc_clk exynos5_clk_pclk_acp = {
 
 /* Core list of CMU_TOP side */
 
-struct clk *exynos5_clkset_aclk_top_list[] = {
+static struct clk *exynos5_clkset_aclk_top_list[] = {
 	[0] = &exynos5_clk_mout_mpll_user.clk,
 	[1] = &exynos5_clk_mout_bpll_user.clk,
 };
 
-struct clksrc_sources exynos5_clkset_aclk = {
+static struct clksrc_sources exynos5_clkset_aclk = {
 	.sources	= exynos5_clkset_aclk_top_list,
 	.nr_sources	= ARRAY_SIZE(exynos5_clkset_aclk_top_list),
 };
@@ -486,12 +491,12 @@ static struct clksrc_clk exynos5_clk_aclk_400 = {
 	.reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 24, .size = 3 },
 };
 
-struct clk *exynos5_clkset_aclk_333_166_list[] = {
+static struct clk *exynos5_clkset_aclk_333_166_list[] = {
 	[0] = &exynos5_clk_mout_cpll.clk,
 	[1] = &exynos5_clk_mout_mpll_user.clk,
 };
 
-struct clksrc_sources exynos5_clkset_aclk_333_166 = {
+static struct clksrc_sources exynos5_clkset_aclk_333_166 = {
 	.sources	= exynos5_clkset_aclk_333_166_list,
 	.nr_sources	= ARRAY_SIZE(exynos5_clkset_aclk_333_166_list),
 };
@@ -616,6 +621,11 @@ static struct clk exynos5_init_clocks_off[] = {
 		.enable		= exynos5_clk_ip_peric_ctrl,
 		.ctrlbit	= (1 << 24),
 	}, {
+		.name		= "tmu_apbif",
+		.parent		= &exynos5_clk_aclk_66.clk,
+		.enable		= exynos5_clk_ip_peris_ctrl,
+		.ctrlbit	= (1 << 21),
+	}, {
 		.name		= "rtc",
 		.parent		= &exynos5_clk_aclk_66.clk,
 		.enable		= exynos5_clk_ip_peris_ctrl,
@@ -664,17 +674,22 @@ static struct clk exynos5_init_clocks_off[] = {
 		.ctrlbit	= (1 << 25),
 	}, {
 		.name		= "mfc",
-		.devname	= "s5p-mfc",
+		.devname	= "s5p-mfc-v6",
 		.enable		= exynos5_clk_ip_mfc_ctrl,
 		.ctrlbit	= (1 << 0),
 	}, {
 		.name		= "hdmi",
-		.devname	= "exynos4-hdmi",
+		.devname	= "exynos5-hdmi",
 		.enable		= exynos5_clk_ip_disp1_ctrl,
 		.ctrlbit	= (1 << 6),
 	}, {
+		.name		= "hdmiphy",
+		.devname	= "exynos5-hdmi",
+		.enable		= exynos5_clk_hdmiphy_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
 		.name		= "mixer",
-		.devname	= "s5p-mixer",
+		.devname	= "exynos5-mixer",
 		.enable		= exynos5_clk_ip_disp1_ctrl,
 		.ctrlbit	= (1 << 5),
 	}, {
@@ -966,7 +981,7 @@ static struct clk exynos5_clk_fimd1 = {
 	.ctrlbit	= (1 << 0),
 };
 
-struct clk *exynos5_clkset_group_list[] = {
+static struct clk *exynos5_clkset_group_list[] = {
 	[0] = &clk_ext_xtal_mux,
 	[1] = NULL,
 	[2] = &exynos5_clk_sclk_hdmi24m,
@@ -979,7 +994,7 @@ struct clk *exynos5_clkset_group_list[] = {
 	[9] = &exynos5_clk_mout_cpll.clk,
 };
 
-struct clksrc_sources exynos5_clkset_group = {
+static struct clksrc_sources exynos5_clkset_group = {
 	.sources	= exynos5_clkset_group_list,
 	.nr_sources	= ARRAY_SIZE(exynos5_clkset_group_list),
 };
@@ -1195,7 +1210,7 @@ static struct clksrc_clk exynos5_clk_sclk_spi2 = {
 	.reg_div = { .reg = EXYNOS5_CLKDIV_PERIC2, .shift = 8, .size = 8 },
 };
 
-struct clksrc_clk exynos5_clk_sclk_fimd1 = {
+static struct clksrc_clk exynos5_clk_sclk_fimd1 = {
 	.clk	= {
 		.name		= "sclk_fimd",
 		.devname	= "exynos5-fb.1",
@@ -1476,7 +1491,7 @@ static void exynos5_clock_resume(void)
 #define exynos5_clock_resume NULL
 #endif
 
-struct syscore_ops exynos5_clock_syscore_ops = {
+static struct syscore_ops exynos5_clock_syscore_ops = {
 	.suspend	= exynos5_clock_suspend,
 	.resume		= exynos5_clock_resume,
 };
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 8dd19c696a6..454bc6ed9a8 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -63,7 +63,7 @@ static void exynos4_map_io(void);
 static void exynos5_map_io(void);
 static void exynos4_init_clocks(int xtal);
 static void exynos5_init_clocks(int xtal);
-static void exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+static void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 static int exynos_init(void);
 
 static struct cpu_table cpu_ids[] __initdata = {
@@ -72,7 +72,7 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idmask		= EXYNOS4_CPU_MASK,
 		.map_io		= exynos4_map_io,
 		.init_clocks	= exynos4_init_clocks,
-		.init_uarts	= exynos_init_uarts,
+		.init_uarts	= exynos4_init_uarts,
 		.init		= exynos_init,
 		.name		= name_exynos4210,
 	}, {
@@ -80,7 +80,7 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idmask		= EXYNOS4_CPU_MASK,
 		.map_io		= exynos4_map_io,
 		.init_clocks	= exynos4_init_clocks,
-		.init_uarts	= exynos_init_uarts,
+		.init_uarts	= exynos4_init_uarts,
 		.init		= exynos_init,
 		.name		= name_exynos4212,
 	}, {
@@ -88,7 +88,7 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idmask		= EXYNOS4_CPU_MASK,
 		.map_io		= exynos4_map_io,
 		.init_clocks	= exynos4_init_clocks,
-		.init_uarts	= exynos_init_uarts,
+		.init_uarts	= exynos4_init_uarts,
 		.init		= exynos_init,
 		.name		= name_exynos4412,
 	}, {
@@ -96,7 +96,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idmask		= EXYNOS5_SOC_MASK,
 		.map_io		= exynos5_map_io,
 		.init_clocks	= exynos5_init_clocks,
-		.init_uarts	= exynos_init_uarts,
 		.init		= exynos_init,
 		.name		= name_exynos5250,
 	},
@@ -257,25 +256,10 @@ static struct map_desc exynos5_iodesc[] __initdata = {
 		.length		= SZ_64K,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= (unsigned long)S5P_VA_COMBINER_BASE,
-		.pfn		= __phys_to_pfn(EXYNOS5_PA_COMBINER),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
 		.virtual	= (unsigned long)S3C_VA_UART,
 		.pfn		= __phys_to_pfn(EXYNOS5_PA_UART),
 		.length		= SZ_512K,
 		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_GIC_CPU,
-		.pfn		= __phys_to_pfn(EXYNOS5_PA_GIC_CPU),
-		.length		= SZ_8K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_GIC_DIST,
-		.pfn		= __phys_to_pfn(EXYNOS5_PA_GIC_DIST),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
 	},
 };
 
@@ -354,23 +338,6 @@ static void __init exynos4_map_io(void)
 static void __init exynos5_map_io(void)
 {
 	iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc));
-
-	s3c_device_i2c0.resource[0].start = EXYNOS5_PA_IIC(0);
-	s3c_device_i2c0.resource[0].end   = EXYNOS5_PA_IIC(0) + SZ_4K - 1;
-	s3c_device_i2c0.resource[1].start = EXYNOS5_IRQ_IIC;
-	s3c_device_i2c0.resource[1].end   = EXYNOS5_IRQ_IIC;
-
-	s3c_sdhci_setname(0, "exynos4-sdhci");
-	s3c_sdhci_setname(1, "exynos4-sdhci");
-	s3c_sdhci_setname(2, "exynos4-sdhci");
-	s3c_sdhci_setname(3, "exynos4-sdhci");
-
-	/* The I2C bus controllers are directly compatible with s3c2440 */
-	s3c_i2c0_setname("s3c2440-i2c");
-	s3c_i2c1_setname("s3c2440-i2c");
-	s3c_i2c2_setname("s3c2440-i2c");
-
-	s3c64xx_spi_setname("exynos4210-spi");
 }
 
 static void __init exynos4_init_clocks(int xtal)
@@ -589,7 +556,8 @@ static void __init combiner_init(void __iomem *combiner_base,
 }
 
 #ifdef CONFIG_OF
-int __init combiner_of_init(struct device_node *np, struct device_node *parent)
+static int __init combiner_of_init(struct device_node *np,
+				   struct device_node *parent)
 {
 	void __iomem *combiner_base;
 
@@ -729,7 +697,7 @@ static int __init exynos_init(void)
 
 /* uart registration process */
 
-static void __init exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+static void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 {
 	struct s3c2410_uartcfg *tcfg = cfg;
 	u32 ucnt;
@@ -737,10 +705,7 @@ static void __init exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 	for (ucnt = 0; ucnt < no; ucnt++, tcfg++)
 		tcfg->has_fracval = 1;
 
-	if (soc_is_exynos5250())
-		s3c24xx_init_uartdevs("exynos4210-uart", exynos5_uart_resources, cfg, no);
-	else
-		s3c24xx_init_uartdevs("exynos4210-uart", exynos4_uart_resources, cfg, no);
+	s3c24xx_init_uartdevs("exynos4210-uart", exynos4_uart_resources, cfg, no);
 }
 
 static void __iomem *exynos_eint_base;
@@ -972,14 +937,7 @@ static void exynos_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
 	struct irq_chip *chip = irq_get_chip(irq);
 
 	chained_irq_enter(chip, desc);
-	chip->irq_mask(&desc->irq_data);
-
-	if (chip->irq_ack)
-		chip->irq_ack(&desc->irq_data);
-
 	generic_handle_irq(*irq_data);
-
-	chip->irq_unmask(&desc->irq_data);
 	chained_irq_exit(chip, desc);
 }
 
@@ -999,11 +957,14 @@ static int __init exynos_init_irq_eint(void)
 	 * platforms switch over to using the pinctrl driver, the wakeup
 	 * interrupt support code here can be completely removed.
 	 */
+	static const struct of_device_id exynos_pinctrl_ids[] = {
+		{ .compatible = "samsung,pinctrl-exynos4210", },
+		{ .compatible = "samsung,pinctrl-exynos4x12", },
+	};
 	struct device_node *pctrl_np, *wkup_np;
-	const char *pctrl_compat = "samsung,pinctrl-exynos4210";
 	const char *wkup_compat = "samsung,exynos4210-wakeup-eint";
 
-	for_each_compatible_node(pctrl_np, NULL, pctrl_compat) {
+	for_each_matching_node(pctrl_np, exynos_pinctrl_ids) {
 		if (of_device_is_available(pctrl_np)) {
 			wkup_np = of_find_compatible_node(pctrl_np, NULL,
 							wkup_compat);
diff --git a/arch/arm/mach-exynos/dev-audio.c b/arch/arm/mach-exynos/dev-audio.c
index ae321c7cb15..a1cb42c3959 100644
--- a/arch/arm/mach-exynos/dev-audio.c
+++ b/arch/arm/mach-exynos/dev-audio.c
@@ -14,9 +14,9 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/gpio.h>
+#include <linux/platform_data/asoc-s3c.h>
 
 #include <plat/gpio-cfg.h>
-#include <linux/platform_data/asoc-s3c.h>
 
 #include <mach/map.h>
 #include <mach/dma.h>
diff --git a/arch/arm/mach-exynos/dev-drm.c b/arch/arm/mach-exynos/dev-drm.c
deleted file mode 100644
index 17c9c6ecc2e..00000000000
--- a/arch/arm/mach-exynos/dev-drm.c
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * linux/arch/arm/mach-exynos/dev-drm.c
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS - core DRM device
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-
-#include <plat/devs.h>
-
-static u64 exynos_drm_dma_mask = DMA_BIT_MASK(32);
-
-struct platform_device exynos_device_drm = {
-	.name	= "exynos-drm",
-	.dev	= {
-		.dma_mask		= &exynos_drm_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
diff --git a/arch/arm/mach-exynos/dev-ohci.c b/arch/arm/mach-exynos/dev-ohci.c
index 14ed7951a2c..4244d02dafb 100644
--- a/arch/arm/mach-exynos/dev-ohci.c
+++ b/arch/arm/mach-exynos/dev-ohci.c
@@ -12,10 +12,10 @@
 
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
+#include <linux/platform_data/usb-exynos.h>
 
 #include <mach/irqs.h>
 #include <mach/map.h>
-#include <linux/platform_data/usb-exynos.h>
 
 #include <plat/devs.h>
 #include <plat/usb-phy.h>
diff --git a/arch/arm/mach-exynos/dev-uart.c b/arch/arm/mach-exynos/dev-uart.c
index 2e85c022fd1..7c42f4b7c8b 100644
--- a/arch/arm/mach-exynos/dev-uart.c
+++ b/arch/arm/mach-exynos/dev-uart.c
@@ -52,27 +52,3 @@ struct s3c24xx_uart_resources exynos4_uart_resources[] __initdata = {
 		.nr_resources	= ARRAY_SIZE(exynos4_uart3_resource),
 	},
 };
-
-EXYNOS_UART_RESOURCE(5, 0)
-EXYNOS_UART_RESOURCE(5, 1)
-EXYNOS_UART_RESOURCE(5, 2)
-EXYNOS_UART_RESOURCE(5, 3)
-
-struct s3c24xx_uart_resources exynos5_uart_resources[] __initdata = {
-	[0] = {
-		.resources	= exynos5_uart0_resource,
-		.nr_resources	= ARRAY_SIZE(exynos5_uart0_resource),
-	},
-	[1] = {
-		.resources	= exynos5_uart1_resource,
-		.nr_resources	= ARRAY_SIZE(exynos5_uart0_resource),
-	},
-	[2] = {
-		.resources	= exynos5_uart2_resource,
-		.nr_resources	= ARRAY_SIZE(exynos5_uart2_resource),
-	},
-	[3] = {
-		.resources	= exynos5_uart3_resource,
-		.nr_resources	= ARRAY_SIZE(exynos5_uart3_resource),
-	},
-};
diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c
index 21d568b3b14..87e07d6fc61 100644
--- a/arch/arm/mach-exynos/dma.c
+++ b/arch/arm/mach-exynos/dma.c
@@ -275,6 +275,9 @@ static int __init exynos_dma_init(void)
 		exynos_pdma1_pdata.nr_valid_peri =
 			ARRAY_SIZE(exynos4210_pdma1_peri);
 		exynos_pdma1_pdata.peri_id = exynos4210_pdma1_peri;
+
+		if (samsung_rev() == EXYNOS4210_REV_0)
+			exynos_mdma1_device.res.start = EXYNOS4_PA_S_MDMA1;
 	} else if (soc_is_exynos4212() || soc_is_exynos4412()) {
 		exynos_pdma0_pdata.nr_valid_peri =
 			ARRAY_SIZE(exynos4212_pdma0_peri);
diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h
index 35bced6f909..5d44616c201 100644
--- a/arch/arm/mach-exynos/include/mach/irqs.h
+++ b/arch/arm/mach-exynos/include/mach/irqs.h
@@ -136,6 +136,9 @@
 #define EXYNOS4_IRQ_TSI			IRQ_SPI(115)
 #define EXYNOS4_IRQ_SATA		IRQ_SPI(116)
 
+#define EXYNOS4_IRQ_TMU_TRIG0		COMBINER_IRQ(2, 4)
+#define EXYNOS4_IRQ_TMU_TRIG1		COMBINER_IRQ(3, 4)
+
 #define EXYNOS4_IRQ_SYSMMU_MDMA0_0	COMBINER_IRQ(4, 0)
 #define EXYNOS4_IRQ_SYSMMU_SSS_0	COMBINER_IRQ(4, 1)
 #define EXYNOS4_IRQ_SYSMMU_FIMC0_0	COMBINER_IRQ(4, 2)
@@ -259,11 +262,6 @@
 #define EXYNOS5_IRQ_IEM_IEC		IRQ_SPI(48)
 #define EXYNOS5_IRQ_IEM_APC		IRQ_SPI(49)
 #define EXYNOS5_IRQ_GPIO_C2C		IRQ_SPI(50)
-#define EXYNOS5_IRQ_UART0		IRQ_SPI(51)
-#define EXYNOS5_IRQ_UART1		IRQ_SPI(52)
-#define EXYNOS5_IRQ_UART2		IRQ_SPI(53)
-#define EXYNOS5_IRQ_UART3		IRQ_SPI(54)
-#define EXYNOS5_IRQ_UART4		IRQ_SPI(55)
 #define EXYNOS5_IRQ_IIC			IRQ_SPI(56)
 #define EXYNOS5_IRQ_IIC1		IRQ_SPI(57)
 #define EXYNOS5_IRQ_IIC2		IRQ_SPI(58)
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 8480849affb..9f180aa3a84 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -88,8 +88,11 @@
 #define EXYNOS4_PA_TWD			0x10500600
 #define EXYNOS4_PA_L2CC			0x10502000
 
+#define EXYNOS4_PA_TMU			0x100C0000
+
 #define EXYNOS4_PA_MDMA0		0x10810000
 #define EXYNOS4_PA_MDMA1		0x12850000
+#define EXYNOS4_PA_S_MDMA1		0x12840000
 #define EXYNOS4_PA_PDMA0		0x12680000
 #define EXYNOS4_PA_PDMA1		0x12690000
 #define EXYNOS5_PA_MDMA0		0x10800000
@@ -279,7 +282,6 @@
 #define EXYNOS5_PA_UART1		0x12C10000
 #define EXYNOS5_PA_UART2		0x12C20000
 #define EXYNOS5_PA_UART3		0x12C30000
-#define EXYNOS5_SZ_UART			SZ_256
 
 #define S3C_VA_UARTx(x)			(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
 
diff --git a/arch/arm/mach-exynos/include/mach/regs-pmu.h b/arch/arm/mach-exynos/include/mach/regs-pmu.h
index d4e392b811a..70b2795f528 100644
--- a/arch/arm/mach-exynos/include/mach/regs-pmu.h
+++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h
@@ -230,8 +230,6 @@
 
 /* For EXYNOS5 */
 
-#define EXYNOS5_USB_CFG						S5P_PMUREG(0x0230)
-
 #define EXYNOS5_AUTO_WDTRESET_DISABLE				S5P_PMUREG(0x0408)
 #define EXYNOS5_MASK_WDTRESET_REQUEST				S5P_PMUREG(0x040C)
 
diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c
index eadf4b59e7d..8858068d2b6 100644
--- a/arch/arm/mach-exynos/mach-exynos4-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos4-dt.c
@@ -77,6 +77,8 @@ static const struct of_dev_auxdata exynos4_auxdata_lookup[] __initconst = {
 				"exynos4210-spi.2", NULL),
 	OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA0, "dma-pl330.0", NULL),
 	OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA1, "dma-pl330.1", NULL),
+	OF_DEV_AUXDATA("samsung,exynos4210-tmu", EXYNOS4_PA_TMU,
+				"exynos-tmu", NULL),
 	{},
 };
 
@@ -94,6 +96,8 @@ static void __init exynos4_dt_machine_init(void)
 
 static char const *exynos4_dt_compat[] __initdata = {
 	"samsung,exynos4210",
+	"samsung,exynos4212",
+	"samsung,exynos4412",
 	NULL
 };
 
diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c
index db1cd8eacf2..25f464cf797 100644
--- a/arch/arm/mach-exynos/mach-exynos5-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos5-dt.c
@@ -11,6 +11,8 @@
 
 #include <linux/of_platform.h>
 #include <linux/serial_core.h>
+#include <linux/memblock.h>
+#include <linux/of_fdt.h>
 
 #include <asm/mach/arch.h>
 #include <asm/hardware/gic.h>
@@ -18,6 +20,7 @@
 
 #include <plat/cpu.h>
 #include <plat/regs-serial.h>
+#include <plat/mfc.h>
 
 #include "common.h"
 
@@ -47,6 +50,20 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
 				"s3c2440-i2c.0", NULL),
 	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(1),
 				"s3c2440-i2c.1", NULL),
+	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(2),
+				"s3c2440-i2c.2", NULL),
+	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(3),
+				"s3c2440-i2c.3", NULL),
+	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(4),
+				"s3c2440-i2c.4", NULL),
+	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(5),
+				"s3c2440-i2c.5", NULL),
+	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(6),
+				"s3c2440-i2c.6", NULL),
+	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(7),
+				"s3c2440-i2c.7", NULL),
+	OF_DEV_AUXDATA("samsung,s3c2440-hdmiphy-i2c", EXYNOS5_PA_IIC(8),
+				"s3c2440-hdmiphy-i2c", NULL),
 	OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI0,
 				"dw_mmc.0", NULL),
 	OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI1,
@@ -61,6 +78,12 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
 				"exynos4210-spi.1", NULL),
 	OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI2,
 				"exynos4210-spi.2", NULL),
+	OF_DEV_AUXDATA("samsung,exynos5-sata-ahci", 0x122F0000,
+				"exynos5-sata", NULL),
+	OF_DEV_AUXDATA("samsung,exynos5-sata-phy", 0x12170000,
+				"exynos5-sata-phy", NULL),
+	OF_DEV_AUXDATA("samsung,exynos5-sata-phy-i2c", 0x121D0000,
+				"exynos5-sata-phy-i2c", NULL),
 	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL),
 	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL),
 	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL),
@@ -72,6 +95,13 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
 				"exynos-gsc.2", NULL),
 	OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC3,
 				"exynos-gsc.3", NULL),
+	OF_DEV_AUXDATA("samsung,exynos5-hdmi", 0x14530000,
+				"exynos5-hdmi", NULL),
+	OF_DEV_AUXDATA("samsung,exynos5-mixer", 0x14450000,
+				"exynos5-mixer", NULL),
+	OF_DEV_AUXDATA("samsung,mfc-v6", 0x11000000, "s5p-mfc-v6", NULL),
+	OF_DEV_AUXDATA("samsung,exynos5250-tmu", 0x10060000,
+				"exynos-tmu", NULL),
 	{},
 };
 
@@ -92,6 +122,17 @@ static char const *exynos5250_dt_compat[] __initdata = {
 	NULL
 };
 
+static void __init exynos5_reserve(void)
+{
+	struct s5p_mfc_dt_meminfo mfc_mem;
+
+	/* Reserve memory for MFC only if it's available */
+	mfc_mem.compatible = "samsung,mfc-v6";
+	if (of_scan_flat_dt(s5p_fdt_find_mfc_mem, &mfc_mem))
+		s5p_mfc_reserve_mem(mfc_mem.roff, mfc_mem.rsize, mfc_mem.loff,
+				mfc_mem.lsize);
+}
+
 DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)")
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
 	.init_irq	= exynos5_init_irq,
@@ -103,4 +144,5 @@ DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)")
 	.timer		= &exynos4_timer,
 	.dt_compat	= exynos5250_dt_compat,
 	.restart        = exynos5_restart,
+	.reserve	= exynos5_reserve,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index c05d7aa8403..27d4ed8b116 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -25,7 +25,10 @@
 #include <linux/mmc/host.h>
 #include <linux/fb.h>
 #include <linux/pwm_backlight.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mipi-csis.h>
 #include <linux/platform_data/s3c-hsotg.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
 #include <drm/exynos_drm.h>
 
 #include <video/platform_lcd.h>
@@ -45,14 +48,11 @@
 #include <plat/devs.h>
 #include <plat/fb.h>
 #include <plat/sdhci.h>
-#include <linux/platform_data/usb-ehci-s5p.h>
 #include <plat/clock.h>
 #include <plat/gpio-cfg.h>
-#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/mfc.h>
 #include <plat/fimc-core.h>
 #include <plat/camport.h>
-#include <linux/platform_data/mipi-csis.h>
 
 #include <mach/map.h>
 
@@ -113,7 +113,6 @@ static struct s3c_sdhci_platdata nuri_hsmmc0_data __initdata = {
 	.host_caps		= (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
 				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
 				MMC_CAP_ERASE),
-	.host_caps2		= MMC_CAP2_BROKEN_VOLTAGE,
 	.cd_type		= S3C_SDHCI_CD_PERMANENT,
 };
 
@@ -1327,9 +1326,6 @@ static struct platform_device *nuri_devices[] __initdata = {
 	&cam_vdda_fixed_rdev,
 	&cam_8m_12v_fixed_rdev,
 	&exynos4_bus_devfreq,
-#ifdef CONFIG_DRM_EXYNOS
-	&exynos_device_drm,
-#endif
 };
 
 static void __init nuri_map_io(void)
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index 9adf491674e..c931ce15a96 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -23,7 +23,10 @@
 #include <linux/mfd/max8997.h>
 #include <linux/lcd.h>
 #include <linux/rfkill-gpio.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <linux/platform_data/s3c-hsotg.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
+#include <linux/platform_data/usb-exynos.h>
 
 #include <asm/mach/arch.h>
 #include <asm/hardware/gic.h>
@@ -36,8 +39,6 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/sdhci.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/usb-ehci-s5p.h>
 #include <plat/clock.h>
 #include <plat/gpio-cfg.h>
 #include <plat/backlight.h>
@@ -45,7 +46,6 @@
 #include <plat/mfc.h>
 #include <plat/hdmi.h>
 
-#include <linux/platform_data/usb-exynos.h>
 #include <mach/map.h>
 
 #include <drm/exynos_drm.h>
@@ -709,9 +709,6 @@ static struct platform_device *origen_devices[] __initdata = {
 	&s5p_device_mfc_l,
 	&s5p_device_mfc_r,
 	&s5p_device_mixer,
-#ifdef CONFIG_DRM_EXYNOS
-	&exynos_device_drm,
-#endif
 	&exynos4_device_ohci,
 	&origen_device_gpiokeys,
 	&origen_lcd_hv070wsa,
diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c
index 730f1ac6592..a1555a73c7a 100644
--- a/arch/arm/mach-exynos/mach-smdk4x12.c
+++ b/arch/arm/mach-exynos/mach-smdk4x12.c
@@ -21,6 +21,7 @@
 #include <linux/pwm_backlight.h>
 #include <linux/regulator/machine.h>
 #include <linux/serial_core.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <linux/platform_data/s3c-hsotg.h>
 
 #include <asm/mach/arch.h>
@@ -34,7 +35,6 @@
 #include <plat/devs.h>
 #include <plat/fb.h>
 #include <plat/gpio-cfg.h>
-#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/keypad.h>
 #include <plat/mfc.h>
 #include <plat/regs-serial.h>
@@ -317,9 +317,6 @@ static struct platform_device *smdk4x12_devices[] __initdata = {
 	&s5p_device_mfc,
 	&s5p_device_mfc_l,
 	&s5p_device_mfc_r,
-#ifdef CONFIG_DRM_EXYNOS
-	&exynos_device_drm,
-#endif
 	&samsung_device_keypad,
 };
 
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
index ee4fb1a9cb7..063cb94b934 100644
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -20,7 +20,10 @@
 #include <linux/input.h>
 #include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <linux/platform_data/s3c-hsotg.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
+#include <linux/platform_data/usb-exynos.h>
 
 #include <asm/mach/arch.h>
 #include <asm/hardware/gic.h>
@@ -35,16 +38,13 @@
 #include <plat/fb.h>
 #include <plat/keypad.h>
 #include <plat/sdhci.h>
-#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 #include <plat/backlight.h>
 #include <plat/mfc.h>
-#include <linux/platform_data/usb-ehci-s5p.h>
 #include <plat/clock.h>
 #include <plat/hdmi.h>
 
 #include <mach/map.h>
-#include <linux/platform_data/usb-exynos.h>
 
 #include <drm/exynos_drm.h>
 #include "common.h"
@@ -300,9 +300,6 @@ static struct platform_device *smdkv310_devices[] __initdata = {
 	&s5p_device_fimc_md,
 	&s5p_device_g2d,
 	&s5p_device_jpeg,
-#ifdef CONFIG_DRM_EXYNOS
-	&exynos_device_drm,
-#endif
 	&exynos4_device_ac97,
 	&exynos4_device_i2s0,
 	&exynos4_device_ohci,
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index ebc9dd339a3..9e3340f1895 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -23,6 +23,8 @@
 #include <linux/i2c-gpio.h>
 #include <linux/i2c/mcs.h>
 #include <linux/i2c/atmel_mxt_ts.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mipi-csis.h>
 #include <linux/platform_data/s3c-hsotg.h>
 #include <drm/exynos_drm.h>
 
@@ -35,7 +37,6 @@
 #include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
-#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 #include <plat/fb.h>
 #include <plat/mfc.h>
@@ -43,7 +44,6 @@
 #include <plat/fimc-core.h>
 #include <plat/s5p-time.h>
 #include <plat/camport.h>
-#include <linux/platform_data/mipi-csis.h>
 
 #include <mach/map.h>
 
@@ -754,7 +754,6 @@ static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = {
 	.max_width		= 8,
 	.host_caps		= (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
 				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
-	.host_caps2		= MMC_CAP2_BROKEN_VOLTAGE,
 	.cd_type		= S3C_SDHCI_CD_PERMANENT,
 };
 
@@ -1081,9 +1080,6 @@ static struct platform_device *universal_devices[] __initdata = {
 	&s5p_device_onenand,
 	&s5p_device_fimd0,
 	&s5p_device_jpeg,
-#ifdef CONFIG_DRM_EXYNOS
-	&exynos_device_drm,
-#endif
 	&s3c_device_usb_hsotg,
 	&s5p_device_mfc,
 	&s5p_device_mfc_l,
diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c
index c0bc83a7663..9f1351de52f 100644
--- a/arch/arm/mach-exynos/pm_domains.c
+++ b/arch/arm/mach-exynos/pm_domains.c
@@ -19,6 +19,8 @@
 #include <linux/pm_domain.h>
 #include <linux/delay.h>
 #include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/sched.h>
 
 #include <mach/regs-pmu.h>
 #include <plat/devs.h>
@@ -83,12 +85,88 @@ static struct exynos_pm_domain PD = {			\
 }
 
 #ifdef CONFIG_OF
+static void exynos_add_device_to_domain(struct exynos_pm_domain *pd,
+					 struct device *dev)
+{
+	int ret;
+
+	dev_dbg(dev, "adding to power domain %s\n", pd->pd.name);
+
+	while (1) {
+		ret = pm_genpd_add_device(&pd->pd, dev);
+		if (ret != -EAGAIN)
+			break;
+		cond_resched();
+	}
+
+	pm_genpd_dev_need_restore(dev, true);
+}
+
+static void exynos_remove_device_from_domain(struct device *dev)
+{
+	struct generic_pm_domain *genpd = dev_to_genpd(dev);
+	int ret;
+
+	dev_dbg(dev, "removing from power domain %s\n", genpd->name);
+
+	while (1) {
+		ret = pm_genpd_remove_device(genpd, dev);
+		if (ret != -EAGAIN)
+			break;
+		cond_resched();
+	}
+}
+
+static void exynos_read_domain_from_dt(struct device *dev)
+{
+	struct platform_device *pd_pdev;
+	struct exynos_pm_domain *pd;
+	struct device_node *node;
+
+	node = of_parse_phandle(dev->of_node, "samsung,power-domain", 0);
+	if (!node)
+		return;
+	pd_pdev = of_find_device_by_node(node);
+	if (!pd_pdev)
+		return;
+	pd = platform_get_drvdata(pd_pdev);
+	exynos_add_device_to_domain(pd, dev);
+}
+
+static int exynos_pm_notifier_call(struct notifier_block *nb,
+				    unsigned long event, void *data)
+{
+	struct device *dev = data;
+
+	switch (event) {
+	case BUS_NOTIFY_BIND_DRIVER:
+		if (dev->of_node)
+			exynos_read_domain_from_dt(dev);
+
+		break;
+
+	case BUS_NOTIFY_UNBOUND_DRIVER:
+		exynos_remove_device_from_domain(dev);
+
+		break;
+	}
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block platform_nb = {
+	.notifier_call = exynos_pm_notifier_call,
+};
+
 static __init int exynos_pm_dt_parse_domains(void)
 {
+	struct platform_device *pdev;
 	struct device_node *np;
 
 	for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") {
 		struct exynos_pm_domain *pd;
+		int on;
+
+		pdev = of_find_device_by_node(np);
 
 		pd = kzalloc(sizeof(*pd), GFP_KERNEL);
 		if (!pd) {
@@ -97,15 +175,22 @@ static __init int exynos_pm_dt_parse_domains(void)
 			return -ENOMEM;
 		}
 
-		if (of_get_property(np, "samsung,exynos4210-pd-off", NULL))
-			pd->is_off = true;
-		pd->name = np->name;
+		pd->pd.name = kstrdup(np->name, GFP_KERNEL);
+		pd->name = pd->pd.name;
 		pd->base = of_iomap(np, 0);
 		pd->pd.power_off = exynos_pd_power_off;
 		pd->pd.power_on = exynos_pd_power_on;
 		pd->pd.of_node = np;
-		pm_genpd_init(&pd->pd, NULL, false);
+
+		platform_set_drvdata(pdev, pd);
+
+		on = __raw_readl(pd->base + 0x4) & S5P_INT_LOCAL_PWR_EN;
+
+		pm_genpd_init(&pd->pd, NULL, !on);
 	}
+
+	bus_register_notifier(&platform_bus_type, &platform_nb);
+
 	return 0;
 }
 #else
diff --git a/arch/arm/plat-mxc/3ds_debugboard.c b/arch/arm/mach-imx/3ds_debugboard.c
index 5c10ad05df7..13437735296 100644
--- a/arch/arm/plat-mxc/3ds_debugboard.c
+++ b/arch/arm/mach-imx/3ds_debugboard.c
@@ -21,7 +21,7 @@
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
 
 /* LAN9217 ethernet base address */
 #define LAN9217_BASE_ADDR(n)	(n + 0x0)
diff --git a/arch/arm/plat-mxc/include/mach/3ds_debugboard.h b/arch/arm/mach-imx/3ds_debugboard.h
index 9fd6cb3f8fa..9fd6cb3f8fa 100644
--- a/arch/arm/plat-mxc/include/mach/3ds_debugboard.h
+++ b/arch/arm/mach-imx/3ds_debugboard.h
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 8d276584650..b09924112f9 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,3 +1,70 @@
+config ARCH_MXC
+	bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
+	select ARCH_REQUIRE_GPIOLIB
+	select ARM_PATCH_PHYS_VIRT
+	select AUTO_ZRELADDR if !ZBOOT_ROM
+	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_IRQ_CHIP
+	select MULTI_IRQ_HANDLER
+	select SPARSE_IRQ
+	select USE_OF
+	help
+	  Support for Freescale MXC/iMX-based family of processors
+
+menu "Freescale i.MX support"
+	depends on ARCH_MXC
+
+config MXC_IRQ_PRIOR
+	bool "Use IRQ priority"
+	help
+	  Select this if you want to use prioritized IRQ handling.
+	  This feature prevents higher priority ISR to be interrupted
+	  by lower priority IRQ even IRQF_DISABLED flag is not set.
+	  This may be useful in embedded applications, where are strong
+	  requirements for timing.
+	  Say N here, unless you have a specialized requirement.
+
+config MXC_TZIC
+	bool
+
+config MXC_AVIC
+	bool
+
+config MXC_DEBUG_BOARD
+	bool "Enable MXC debug board(for 3-stack)"
+	help
+	  The debug board is an integral part of the MXC 3-stack(PDK)
+	  platforms, it can be attached or removed from the peripheral
+	  board. On debug board, several debug devices(ethernet, UART,
+	  buttons, LEDs and JTAG) are implemented. Between the MCU and
+	  these devices, a CPLD is added as a bridge which performs
+	  data/address de-multiplexing and decode, signal level shift,
+	  interrupt control and various board functions.
+
+config HAVE_EPIT
+	bool
+
+config MXC_USE_EPIT
+	bool "Use EPIT instead of GPT"
+	depends on HAVE_EPIT
+	help
+	  Use EPIT as the system timer on systems that have it. Normally you
+	  don't have a reason to do so as the EPIT has the same features and
+	  uses the same clocks as the GPT. Anyway, on some systems the GPT
+	  may be in use for other purposes.
+
+config MXC_ULPI
+	bool
+
+config ARCH_HAS_RNGA
+	bool
+
+config IRAM_ALLOC
+	bool
+	select GENERIC_ALLOCATOR
+
 config HAVE_IMX_GPC
 	bool
 
@@ -5,6 +72,12 @@ config HAVE_IMX_MMDC
 	bool
 
 config HAVE_IMX_SRC
+	def_bool y if SMP
+
+config IMX_HAVE_IOMUX_V1
+	bool
+
+config ARCH_MXC_IOMUX_V3
 	bool
 
 config ARCH_MX1
@@ -104,7 +177,7 @@ config	SOC_IMX51
 	select PINCTRL_IMX51
 	select SOC_IMX5
 
-if ARCH_IMX_V4_V5
+if ARCH_MULTI_V4T
 
 comment "MX1 platforms:"
 config MACH_MXLADS
@@ -133,6 +206,10 @@ config MACH_APF9328
 	help
 	  Say Yes here if you are using the Armadeus APF9328 development board
 
+endif
+
+if ARCH_MULTI_V5
+
 comment "MX21 platforms:"
 
 config MACH_MX21ADS
@@ -195,6 +272,13 @@ config MACH_EUKREA_MBIMXSD25_BASEBOARD
 
 endchoice
 
+config MACH_IMX25_DT
+	bool "Support i.MX25 platforms from device tree"
+	select SOC_IMX25
+	help
+	  Include support for Freescale i.MX25 based platforms
+	  using the device tree for discovery
+
 comment "MX27 platforms:"
 
 config MACH_MX27ADS
@@ -384,7 +468,7 @@ config MACH_IMX27_DT
 
 endif
 
-if ARCH_IMX_V6_V7
+if ARCH_MULTI_V6
 
 comment "MX31 platforms:"
 
@@ -649,6 +733,10 @@ config MACH_VPR200
 	  Include support for VPR200 platform. This includes specific
 	  configurations for the board and its peripherals.
 
+endif
+
+if ARCH_MULTI_V7
+
 comment "i.MX5 platforms:"
 
 config MACH_MX50_RDP
@@ -748,7 +836,14 @@ config	SOC_IMX53
 
 config SOC_IMX6Q
 	bool "i.MX6 Quad support"
+	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_OPP
 	select ARM_CPU_SUSPEND if PM
+	select ARM_ERRATA_743622
+	select ARM_ERRATA_751472
+	select ARM_ERRATA_754322
+	select ARM_ERRATA_764369 if SMP
+	select ARM_ERRATA_775420
 	select ARM_GIC
 	select COMMON_CLK
 	select CPU_V7
@@ -756,13 +851,20 @@ config SOC_IMX6Q
 	select HAVE_CAN_FLEXCAN if CAN
 	select HAVE_IMX_GPC
 	select HAVE_IMX_MMDC
-	select HAVE_IMX_SRC
 	select HAVE_SMP
 	select MFD_SYSCON
 	select PINCTRL
 	select PINCTRL_IMX6Q
+	select PL310_ERRATA_588369 if CACHE_PL310
+	select PL310_ERRATA_727915 if CACHE_PL310
+	select PL310_ERRATA_769419 if CACHE_PL310
+	select PM_OPP if PM
 
 	help
 	  This enables support for Freescale i.MX6 Quad processor.
 
 endif
+
+source "arch/arm/mach-imx/devices/Kconfig"
+
+endmenu
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 895754aeb4f..0634b3152c2 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -1,3 +1,5 @@
+obj-y := time.o cpu.o system.o irq-common.o
+
 obj-$(CONFIG_SOC_IMX1) += clk-imx1.o mm-imx1.o
 obj-$(CONFIG_SOC_IMX21) += clk-imx21.o mm-imx21.o
 
@@ -15,6 +17,24 @@ obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(i
 obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
 			    clk-pfd.o clk-busy.o clk.o
 
+obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
+obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
+
+obj-$(CONFIG_MXC_TZIC) += tzic.o
+obj-$(CONFIG_MXC_AVIC) += avic.o
+
+obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o
+obj-$(CONFIG_MXC_ULPI) += ulpi.o
+obj-$(CONFIG_MXC_USE_EPIT) += epit.o
+obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
+obj-$(CONFIG_CPU_FREQ_IMX)    += cpufreq.o
+obj-$(CONFIG_CPU_IDLE) += cpuidle.o
+
+ifdef CONFIG_SND_IMX_SOC
+obj-y += ssi-fiq.o
+obj-y += ssi-fiq-ksym.o
+endif
+
 # Support for CMOS sensor interface
 obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
 
@@ -30,6 +50,7 @@ obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
 obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX25SD) += mach-eukrea_cpuimx25.o
 obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o
+obj-$(CONFIG_MACH_IMX25_DT) += imx25-dt.o
 
 # i.MX27 based machines
 obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
@@ -89,3 +110,5 @@ obj-$(CONFIG_MACH_MX50_RDP) += mach-mx50_rdp.o
 
 obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
 obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
+
+obj-y += devices/
diff --git a/arch/arm/plat-mxc/avic.c b/arch/arm/mach-imx/avic.c
index cbd55c36def..0eff23ed92b 100644
--- a/arch/arm/plat-mxc/avic.c
+++ b/arch/arm/mach-imx/avic.c
@@ -22,12 +22,11 @@
 #include <linux/irqdomain.h>
 #include <linux/io.h>
 #include <linux/of.h>
-#include <mach/common.h>
 #include <asm/mach/irq.h>
 #include <asm/exception.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
 
+#include "common.h"
+#include "hardware.h"
 #include "irq-common.h"
 
 #define AVIC_INTCNTL		0x00	/* int control reg */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h b/arch/arm/mach-imx/board-mx31lilly.h
index 0df71bfefbb..0df71bfefbb 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
+++ b/arch/arm/mach-imx/board-mx31lilly.h
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/mach-imx/board-mx31lite.h
index c1ad0ae807c..c1ad0ae807c 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h
+++ b/arch/arm/mach-imx/board-mx31lite.h
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/mach-imx/board-mx31moboard.h
index de14543891c..de14543891c 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
+++ b/arch/arm/mach-imx/board-mx31moboard.h
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm038.h b/arch/arm/mach-imx/board-pcm038.h
index 6f371e35753..6f371e35753 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm038.h
+++ b/arch/arm/mach-imx/board-pcm038.h
diff --git a/arch/arm/mach-imx/clk-imx1.c b/arch/arm/mach-imx/clk-imx1.c
index 516ddee1948..15f9d223cf0 100644
--- a/arch/arm/mach-imx/clk-imx1.c
+++ b/arch/arm/mach-imx/clk-imx1.c
@@ -22,9 +22,9 @@
 #include <linux/clkdev.h>
 #include <linux/err.h>
 
-#include <mach/hardware.h>
-#include <mach/common.h>
 #include "clk.h"
+#include "common.h"
+#include "hardware.h"
 
 /* CCM register addresses */
 #define IO_ADDR_CCM(off)	(MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR + (off)))
@@ -82,7 +82,8 @@ int __init mx1_clocks_init(unsigned long fref)
 			pr_err("imx1 clk %d: register failed with %ld\n",
 				i, PTR_ERR(clk[i]));
 
-	clk_register_clkdev(clk[dma_gate], "ahb", "imx-dma");
+	clk_register_clkdev(clk[dma_gate], "ahb", "imx1-dma");
+	clk_register_clkdev(clk[hclk], "ipg", "imx1-dma");
 	clk_register_clkdev(clk[csi_gate], NULL, "mx1-camera.0");
 	clk_register_clkdev(clk[mma_gate], "mma", NULL);
 	clk_register_clkdev(clk[usbd_gate], NULL, "imx_udc.0");
@@ -94,18 +95,18 @@ int __init mx1_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.1");
 	clk_register_clkdev(clk[per1], "per", "imx1-uart.2");
 	clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.2");
-	clk_register_clkdev(clk[hclk], NULL, "imx-i2c.0");
+	clk_register_clkdev(clk[hclk], NULL, "imx1-i2c.0");
 	clk_register_clkdev(clk[per2], "per", "imx1-cspi.0");
 	clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.0");
 	clk_register_clkdev(clk[per2], "per", "imx1-cspi.1");
 	clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.1");
 	clk_register_clkdev(clk[per2], NULL, "imx-mmc.0");
-	clk_register_clkdev(clk[per2], "per", "imx-fb.0");
-	clk_register_clkdev(clk[dummy], "ipg", "imx-fb.0");
-	clk_register_clkdev(clk[dummy], "ahb", "imx-fb.0");
+	clk_register_clkdev(clk[per2], "per", "imx1-fb.0");
+	clk_register_clkdev(clk[dummy], "ipg", "imx1-fb.0");
+	clk_register_clkdev(clk[dummy], "ahb", "imx1-fb.0");
 	clk_register_clkdev(clk[hclk], "mshc", NULL);
 	clk_register_clkdev(clk[per3], "ssi", NULL);
-	clk_register_clkdev(clk[clk32], NULL, "mxc_rtc.0");
+	clk_register_clkdev(clk[clk32], NULL, "imx1-rtc.0");
 	clk_register_clkdev(clk[clko], "clko", NULL);
 
 	mxc_timer_init(MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), MX1_TIM1_INT);
diff --git a/arch/arm/mach-imx/clk-imx21.c b/arch/arm/mach-imx/clk-imx21.c
index cf65148bc51..d7ed66091a2 100644
--- a/arch/arm/mach-imx/clk-imx21.c
+++ b/arch/arm/mach-imx/clk-imx21.c
@@ -25,9 +25,9 @@
 #include <linux/module.h>
 #include <linux/err.h>
 
-#include <mach/hardware.h>
-#include <mach/common.h>
 #include "clk.h"
+#include "common.h"
+#include "hardware.h"
 
 #define IO_ADDR_CCM(off)	(MX21_IO_ADDRESS(MX21_CCM_BASE_ADDR + (off)))
 
@@ -156,16 +156,16 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href)
 	clk_register_clkdev(clk[cspi2_ipg_gate], "ipg", "imx21-cspi.1");
 	clk_register_clkdev(clk[per2], "per", "imx21-cspi.2");
 	clk_register_clkdev(clk[cspi3_ipg_gate], "ipg", "imx21-cspi.2");
-	clk_register_clkdev(clk[per3], "per", "imx-fb.0");
-	clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx-fb.0");
-	clk_register_clkdev(clk[lcdc_hclk_gate], "ahb", "imx-fb.0");
+	clk_register_clkdev(clk[per3], "per", "imx21-fb.0");
+	clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx21-fb.0");
+	clk_register_clkdev(clk[lcdc_hclk_gate], "ahb", "imx21-fb.0");
 	clk_register_clkdev(clk[usb_gate], "per", "imx21-hcd.0");
 	clk_register_clkdev(clk[usb_hclk_gate], "ahb", "imx21-hcd.0");
-	clk_register_clkdev(clk[nfc_gate], NULL, "mxc_nand.0");
-	clk_register_clkdev(clk[dma_hclk_gate], "ahb", "imx-dma");
-	clk_register_clkdev(clk[dma_gate], "ipg", "imx-dma");
+	clk_register_clkdev(clk[nfc_gate], NULL, "imx21-nand.0");
+	clk_register_clkdev(clk[dma_hclk_gate], "ahb", "imx21-dma");
+	clk_register_clkdev(clk[dma_gate], "ipg", "imx21-dma");
 	clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
-	clk_register_clkdev(clk[i2c_gate], NULL, "imx-i2c.0");
+	clk_register_clkdev(clk[i2c_gate], NULL, "imx21-i2c.0");
 	clk_register_clkdev(clk[kpp_gate], NULL, "mxc-keypad");
 	clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1.0");
 	clk_register_clkdev(clk[brom_gate], "brom", NULL);
diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c
index 01e2f843bf2..b197aa73dc4 100644
--- a/arch/arm/mach-imx/clk-imx25.c
+++ b/arch/arm/mach-imx/clk-imx25.c
@@ -23,11 +23,14 @@
 #include <linux/io.h>
 #include <linux/clkdev.h>
 #include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/mx25.h>
 #include "clk.h"
+#include "common.h"
+#include "hardware.h"
+#include "mx25.h"
 
 #define CRM_BASE	MX25_IO_ADDRESS(MX25_CRM_BASE_ADDR)
 
@@ -55,6 +58,8 @@
 
 #define ccm(x)	(CRM_BASE + (x))
 
+static struct clk_onecell_data clk_data;
+
 static const char *cpu_sel_clks[] = { "mpll", "mpll_cpu_3_4", };
 static const char *per_sel_clks[] = { "ahb", "upll", };
 
@@ -64,24 +69,30 @@ enum mx25_clks {
 	per7_sel, per8_sel, per9_sel, per10_sel, per11_sel, per12_sel,
 	per13_sel, per14_sel, per15_sel, per0, per1, per2, per3, per4, per5,
 	per6, per7, per8, per9, per10, per11, per12, per13, per14, per15,
-	csi_ipg_per, esdhc1_ipg_per, esdhc2_ipg_per, gpt_ipg_per, i2c_ipg_per,
-	lcdc_ipg_per, nfc_ipg_per, ssi1_ipg_per, ssi2_ipg_per, uart_ipg_per,
-	csi_ahb, esdhc1_ahb, esdhc2_ahb, fec_ahb, lcdc_ahb, sdma_ahb,
-	usbotg_ahb, can1_ipg, can2_ipg, csi_ipg, cspi1_ipg, cspi2_ipg,
-	cspi3_ipg, dryice_ipg, esdhc1_ipg, esdhc2_ipg, fec_ipg, iim_ipg,
-	kpp_ipg, lcdc_ipg, pwm1_ipg, pwm2_ipg, pwm3_ipg, pwm4_ipg, sdma_ipg,
-	ssi1_ipg, ssi2_ipg, tsc_ipg, uart1_ipg, uart2_ipg, uart3_ipg,
-	uart4_ipg, uart5_ipg, wdt_ipg, clk_max
+	csi_ipg_per, epit_ipg_per, esai_ipg_per, esdhc1_ipg_per, esdhc2_ipg_per,
+	gpt_ipg_per, i2c_ipg_per, lcdc_ipg_per, nfc_ipg_per, owire_ipg_per,
+	pwm_ipg_per, sim1_ipg_per, sim2_ipg_per, ssi1_ipg_per, ssi2_ipg_per,
+	uart_ipg_per, ata_ahb, reserved1, csi_ahb, emi_ahb, esai_ahb, esdhc1_ahb,
+	esdhc2_ahb, fec_ahb, lcdc_ahb, rtic_ahb, sdma_ahb, slcdc_ahb, usbotg_ahb,
+	reserved2, reserved3, reserved4, reserved5, can1_ipg, can2_ipg,	csi_ipg,
+	cspi1_ipg, cspi2_ipg, cspi3_ipg, dryice_ipg, ect_ipg, epit1_ipg, epit2_ipg,
+	reserved6, esdhc1_ipg, esdhc2_ipg, fec_ipg, reserved7, reserved8, reserved9,
+	gpt1_ipg, gpt2_ipg, gpt3_ipg, gpt4_ipg, reserved10, reserved11, reserved12,
+	iim_ipg, reserved13, reserved14, kpp_ipg, lcdc_ipg, reserved15, pwm1_ipg,
+	pwm2_ipg, pwm3_ipg, pwm4_ipg, rngb_ipg, reserved16, scc_ipg, sdma_ipg,
+	sim1_ipg, sim2_ipg, slcdc_ipg, spba_ipg, ssi1_ipg, ssi2_ipg, tsc_ipg,
+	uart1_ipg, uart2_ipg, uart3_ipg, uart4_ipg, uart5_ipg, reserved17,
+	wdt_ipg, clk_max
 };
 
 static struct clk *clk[clk_max];
 
-int __init mx25_clocks_init(void)
+static int __init __mx25_clocks_init(unsigned long osc_rate)
 {
 	int i;
 
 	clk[dummy] = imx_clk_fixed("dummy", 0);
-	clk[osc] = imx_clk_fixed("osc", 24000000);
+	clk[osc] = imx_clk_fixed("osc", osc_rate);
 	clk[mpll] = imx_clk_pllv1("mpll", "osc", ccm(CCM_MPCTL));
 	clk[upll] = imx_clk_pllv1("upll", "osc", ccm(CCM_UPCTL));
 	clk[mpll_cpu_3_4] = imx_clk_fixed_factor("mpll_cpu_3_4", "mpll", 3, 4);
@@ -123,22 +134,36 @@ int __init mx25_clocks_init(void)
 	clk[per14] = imx_clk_divider("per14", "per14_sel", ccm(CCM_PCDR3), 16, 6);
 	clk[per15] = imx_clk_divider("per15", "per15_sel", ccm(CCM_PCDR3), 24, 6);
 	clk[csi_ipg_per] = imx_clk_gate("csi_ipg_per", "per0", ccm(CCM_CGCR0), 0);
+	clk[epit_ipg_per] = imx_clk_gate("epit_ipg_per", "per1", ccm(CCM_CGCR0),  1);
+	clk[esai_ipg_per] = imx_clk_gate("esai_ipg_per", "per2", ccm(CCM_CGCR0),  2);
 	clk[esdhc1_ipg_per] = imx_clk_gate("esdhc1_ipg_per", "per3", ccm(CCM_CGCR0),  3);
 	clk[esdhc2_ipg_per] = imx_clk_gate("esdhc2_ipg_per", "per4", ccm(CCM_CGCR0),  4);
 	clk[gpt_ipg_per] = imx_clk_gate("gpt_ipg_per", "per5", ccm(CCM_CGCR0),  5);
 	clk[i2c_ipg_per] = imx_clk_gate("i2c_ipg_per", "per6", ccm(CCM_CGCR0),  6);
 	clk[lcdc_ipg_per] = imx_clk_gate("lcdc_ipg_per", "per7", ccm(CCM_CGCR0),  7);
 	clk[nfc_ipg_per] = imx_clk_gate("nfc_ipg_per", "per8", ccm(CCM_CGCR0),  8);
+	clk[owire_ipg_per] = imx_clk_gate("owire_ipg_per", "per9", ccm(CCM_CGCR0),  9);
+	clk[pwm_ipg_per] = imx_clk_gate("pwm_ipg_per", "per10", ccm(CCM_CGCR0),  10);
+	clk[sim1_ipg_per] = imx_clk_gate("sim1_ipg_per", "per11", ccm(CCM_CGCR0),  11);
+	clk[sim2_ipg_per] = imx_clk_gate("sim2_ipg_per", "per12", ccm(CCM_CGCR0),  12);
 	clk[ssi1_ipg_per] = imx_clk_gate("ssi1_ipg_per", "per13", ccm(CCM_CGCR0), 13);
 	clk[ssi2_ipg_per] = imx_clk_gate("ssi2_ipg_per", "per14", ccm(CCM_CGCR0), 14);
 	clk[uart_ipg_per] = imx_clk_gate("uart_ipg_per", "per15", ccm(CCM_CGCR0), 15);
+	clk[ata_ahb] = imx_clk_gate("ata_ahb", "ahb", ccm(CCM_CGCR0), 16);
+	/* CCM_CGCR0(17): reserved */
 	clk[csi_ahb] = imx_clk_gate("csi_ahb", "ahb", ccm(CCM_CGCR0), 18);
+	clk[emi_ahb] = imx_clk_gate("emi_ahb", "ahb", ccm(CCM_CGCR0), 19);
+	clk[esai_ahb] = imx_clk_gate("esai_ahb", "ahb", ccm(CCM_CGCR0), 20);
 	clk[esdhc1_ahb] = imx_clk_gate("esdhc1_ahb", "ahb", ccm(CCM_CGCR0), 21);
 	clk[esdhc2_ahb] = imx_clk_gate("esdhc2_ahb", "ahb", ccm(CCM_CGCR0), 22);
 	clk[fec_ahb] = imx_clk_gate("fec_ahb", "ahb", ccm(CCM_CGCR0), 23);
 	clk[lcdc_ahb] = imx_clk_gate("lcdc_ahb", "ahb", ccm(CCM_CGCR0), 24);
+	clk[rtic_ahb] = imx_clk_gate("rtic_ahb", "ahb", ccm(CCM_CGCR0), 25);
 	clk[sdma_ahb] = imx_clk_gate("sdma_ahb", "ahb", ccm(CCM_CGCR0), 26);
+	clk[slcdc_ahb] = imx_clk_gate("slcdc_ahb", "ahb", ccm(CCM_CGCR0), 27);
 	clk[usbotg_ahb] = imx_clk_gate("usbotg_ahb", "ahb", ccm(CCM_CGCR0), 28);
+	/* CCM_CGCR0(29-31): reserved */
+	/* CCM_CGCR1(0): reserved in datasheet, used as audmux in FSL kernel */
 	clk[can1_ipg] = imx_clk_gate("can1_ipg", "ipg", ccm(CCM_CGCR1),  2);
 	clk[can2_ipg] = imx_clk_gate("can2_ipg", "ipg", ccm(CCM_CGCR1),  3);
 	clk[csi_ipg] = imx_clk_gate("csi_ipg", "ipg", ccm(CCM_CGCR1),  4);
@@ -146,17 +171,41 @@ int __init mx25_clocks_init(void)
 	clk[cspi2_ipg] = imx_clk_gate("cspi2_ipg", "ipg", ccm(CCM_CGCR1),  6);
 	clk[cspi3_ipg] = imx_clk_gate("cspi3_ipg", "ipg", ccm(CCM_CGCR1),  7);
 	clk[dryice_ipg] = imx_clk_gate("dryice_ipg", "ipg", ccm(CCM_CGCR1),  8);
+	clk[ect_ipg] = imx_clk_gate("ect_ipg", "ipg", ccm(CCM_CGCR1),  9);
+	clk[epit1_ipg] = imx_clk_gate("epit1_ipg", "ipg", ccm(CCM_CGCR1),  10);
+	clk[epit2_ipg] = imx_clk_gate("epit2_ipg", "ipg", ccm(CCM_CGCR1),  11);
+	/* CCM_CGCR1(12): reserved in datasheet, used as esai in FSL kernel */
 	clk[esdhc1_ipg] = imx_clk_gate("esdhc1_ipg", "ipg", ccm(CCM_CGCR1), 13);
 	clk[esdhc2_ipg] = imx_clk_gate("esdhc2_ipg", "ipg", ccm(CCM_CGCR1), 14);
 	clk[fec_ipg] = imx_clk_gate("fec_ipg", "ipg", ccm(CCM_CGCR1), 15);
+	/* CCM_CGCR1(16): reserved in datasheet, used as gpio1 in FSL kernel */
+	/* CCM_CGCR1(17): reserved in datasheet, used as gpio2 in FSL kernel */
+	/* CCM_CGCR1(18): reserved in datasheet, used as gpio3 in FSL kernel */
+	clk[gpt1_ipg] = imx_clk_gate("gpt1_ipg", "ipg", ccm(CCM_CGCR1), 19);
+	clk[gpt2_ipg] = imx_clk_gate("gpt2_ipg", "ipg", ccm(CCM_CGCR1), 20);
+	clk[gpt3_ipg] = imx_clk_gate("gpt3_ipg", "ipg", ccm(CCM_CGCR1), 21);
+	clk[gpt4_ipg] = imx_clk_gate("gpt4_ipg", "ipg", ccm(CCM_CGCR1), 22);
+	/* CCM_CGCR1(23): reserved in datasheet, used as i2c1 in FSL kernel */
+	/* CCM_CGCR1(24): reserved in datasheet, used as i2c2 in FSL kernel */
+	/* CCM_CGCR1(25): reserved in datasheet, used as i2c3 in FSL kernel */
 	clk[iim_ipg] = imx_clk_gate("iim_ipg", "ipg", ccm(CCM_CGCR1), 26);
+	/* CCM_CGCR1(27): reserved in datasheet, used as iomuxc in FSL kernel */
+	/* CCM_CGCR1(28): reserved in datasheet, used as kpp in FSL kernel */
 	clk[kpp_ipg] = imx_clk_gate("kpp_ipg", "ipg", ccm(CCM_CGCR1), 28);
 	clk[lcdc_ipg] = imx_clk_gate("lcdc_ipg", "ipg", ccm(CCM_CGCR1), 29);
+	/* CCM_CGCR1(30): reserved in datasheet, used as owire in FSL kernel */
 	clk[pwm1_ipg] = imx_clk_gate("pwm1_ipg", "ipg", ccm(CCM_CGCR1), 31);
 	clk[pwm2_ipg] = imx_clk_gate("pwm2_ipg", "ipg", ccm(CCM_CGCR2),  0);
 	clk[pwm3_ipg] = imx_clk_gate("pwm3_ipg", "ipg", ccm(CCM_CGCR2),  1);
 	clk[pwm4_ipg] = imx_clk_gate("pwm4_ipg", "ipg", ccm(CCM_CGCR2),  2);
+	clk[rngb_ipg] = imx_clk_gate("rngb_ipg", "ipg", ccm(CCM_CGCR2),  3);
+	/* CCM_CGCR2(4): reserved in datasheet, used as rtic in FSL kernel */
+	clk[scc_ipg] = imx_clk_gate("scc_ipg", "ipg", ccm(CCM_CGCR2),  5);
 	clk[sdma_ipg] = imx_clk_gate("sdma_ipg", "ipg", ccm(CCM_CGCR2),  6);
+	clk[sim1_ipg] = imx_clk_gate("sim1_ipg", "ipg", ccm(CCM_CGCR2),  7);
+	clk[sim2_ipg] = imx_clk_gate("sim2_ipg", "ipg", ccm(CCM_CGCR2),  8);
+	clk[slcdc_ipg] = imx_clk_gate("slcdc_ipg", "ipg", ccm(CCM_CGCR2),  9);
+	clk[spba_ipg] = imx_clk_gate("spba_ipg", "ipg", ccm(CCM_CGCR2),  10);
 	clk[ssi1_ipg] = imx_clk_gate("ssi1_ipg", "ipg", ccm(CCM_CGCR2), 11);
 	clk[ssi2_ipg] = imx_clk_gate("ssi2_ipg", "ipg", ccm(CCM_CGCR2), 12);
 	clk[tsc_ipg] = imx_clk_gate("tsc_ipg", "ipg", ccm(CCM_CGCR2), 13);
@@ -165,6 +214,7 @@ int __init mx25_clocks_init(void)
 	clk[uart3_ipg] = imx_clk_gate("uart3_ipg", "ipg", ccm(CCM_CGCR2), 16);
 	clk[uart4_ipg] = imx_clk_gate("uart4_ipg", "ipg", ccm(CCM_CGCR2), 17);
 	clk[uart5_ipg] = imx_clk_gate("uart5_ipg", "ipg", ccm(CCM_CGCR2), 18);
+	/* CCM_CGCR2(19): reserved in datasheet, but used as wdt in FSL kernel */
 	clk[wdt_ipg] = imx_clk_gate("wdt_ipg", "ipg", ccm(CCM_CGCR2), 19);
 
 	for (i = 0; i < ARRAY_SIZE(clk); i++)
@@ -172,6 +222,18 @@ int __init mx25_clocks_init(void)
 			pr_err("i.MX25 clk %d: register failed with %ld\n",
 				i, PTR_ERR(clk[i]));
 
+	clk_prepare_enable(clk[emi_ahb]);
+
+	clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
+	clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
+
+	return 0;
+}
+
+int __init mx25_clocks_init(void)
+{
+	__mx25_clocks_init(24000000);
+
 	/* i.mx25 has the i.mx21 type uart */
 	clk_register_clkdev(clk[uart1_ipg], "ipg", "imx21-uart.0");
 	clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.0");
@@ -183,8 +245,6 @@ int __init mx25_clocks_init(void)
 	clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.3");
 	clk_register_clkdev(clk[uart5_ipg], "ipg", "imx21-uart.4");
 	clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.4");
-	clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
-	clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
 	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0");
 	clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.0");
 	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
@@ -197,7 +257,7 @@ int __init mx25_clocks_init(void)
 	clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
 	clk_register_clkdev(clk[usbotg_ahb], "ahb", "fsl-usb2-udc");
 	clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
-	clk_register_clkdev(clk[nfc_ipg_per], NULL, "mxc_nand.0");
+	clk_register_clkdev(clk[nfc_ipg_per], NULL, "imx25-nand.0");
 	/* i.mx25 has the i.mx35 type cspi */
 	clk_register_clkdev(clk[cspi1_ipg], NULL, "imx35-cspi.0");
 	clk_register_clkdev(clk[cspi2_ipg], NULL, "imx35-cspi.1");
@@ -212,15 +272,15 @@ int __init mx25_clocks_init(void)
 	clk_register_clkdev(clk[per10], "per", "mxc_pwm.3");
 	clk_register_clkdev(clk[kpp_ipg], NULL, "imx-keypad");
 	clk_register_clkdev(clk[tsc_ipg], NULL, "mx25-adc");
-	clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx-i2c.0");
-	clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx-i2c.1");
-	clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx-i2c.2");
+	clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.0");
+	clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.1");
+	clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.2");
 	clk_register_clkdev(clk[fec_ipg], "ipg", "imx25-fec.0");
 	clk_register_clkdev(clk[fec_ahb], "ahb", "imx25-fec.0");
 	clk_register_clkdev(clk[dryice_ipg], NULL, "imxdi_rtc.0");
-	clk_register_clkdev(clk[lcdc_ipg_per], "per", "imx-fb.0");
-	clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx-fb.0");
-	clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx-fb.0");
+	clk_register_clkdev(clk[lcdc_ipg_per], "per", "imx21-fb.0");
+	clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx21-fb.0");
+	clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx21-fb.0");
 	clk_register_clkdev(clk[wdt_ipg], NULL, "imx2-wdt.0");
 	clk_register_clkdev(clk[ssi1_ipg], NULL, "imx-ssi.0");
 	clk_register_clkdev(clk[ssi2_ipg], NULL, "imx-ssi.1");
@@ -230,9 +290,9 @@ int __init mx25_clocks_init(void)
 	clk_register_clkdev(clk[esdhc2_ipg_per], "per", "sdhci-esdhc-imx25.1");
 	clk_register_clkdev(clk[esdhc2_ipg], "ipg", "sdhci-esdhc-imx25.1");
 	clk_register_clkdev(clk[esdhc2_ahb], "ahb", "sdhci-esdhc-imx25.1");
-	clk_register_clkdev(clk[csi_ipg_per], "per", "mx2-camera.0");
-	clk_register_clkdev(clk[csi_ipg], "ipg", "mx2-camera.0");
-	clk_register_clkdev(clk[csi_ahb], "ahb", "mx2-camera.0");
+	clk_register_clkdev(clk[csi_ipg_per], "per", "imx25-camera.0");
+	clk_register_clkdev(clk[csi_ipg], "ipg", "imx25-camera.0");
+	clk_register_clkdev(clk[csi_ahb], "ahb", "imx25-camera.0");
 	clk_register_clkdev(clk[dummy], "audmux", NULL);
 	clk_register_clkdev(clk[can1_ipg], NULL, "flexcan.0");
 	clk_register_clkdev(clk[can2_ipg], NULL, "flexcan.1");
@@ -242,5 +302,40 @@ int __init mx25_clocks_init(void)
 	clk_register_clkdev(clk[iim_ipg], "iim", NULL);
 
 	mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), MX25_INT_GPT1);
+
+	return 0;
+}
+
+int __init mx25_clocks_init_dt(void)
+{
+	struct device_node *np;
+	void __iomem *base;
+	int irq;
+	unsigned long osc_rate = 24000000;
+
+	/* retrieve the freqency of fixed clocks from device tree */
+	for_each_compatible_node(np, NULL, "fixed-clock") {
+		u32 rate;
+		if (of_property_read_u32(np, "clock-frequency", &rate))
+			continue;
+
+		if (of_device_is_compatible(np, "fsl,imx-osc"))
+			osc_rate = rate;
+	}
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx25-ccm");
+	clk_data.clks = clk;
+	clk_data.clk_num = ARRAY_SIZE(clk);
+	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
+	__mx25_clocks_init(osc_rate);
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx25-gpt");
+	base = of_iomap(np, 0);
+	WARN_ON(!base);
+	irq = irq_of_parse_and_map(np, 0);
+
+	mxc_timer_init(base, irq);
+
 	return 0;
 }
diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c
index 366e5d59d88..585ab256c58 100644
--- a/arch/arm/mach-imx/clk-imx27.c
+++ b/arch/arm/mach-imx/clk-imx27.c
@@ -6,9 +6,9 @@
 #include <linux/clk-provider.h>
 #include <linux/of.h>
 
-#include <mach/common.h>
-#include <mach/hardware.h>
 #include "clk.h"
+#include "common.h"
+#include "hardware.h"
 
 #define IO_ADDR_CCM(off)	(MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR + (off)))
 
@@ -211,19 +211,19 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[gpt6_ipg_gate], "ipg", "imx-gpt.5");
 	clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.5");
 	clk_register_clkdev(clk[pwm_ipg_gate], NULL, "mxc_pwm.0");
-	clk_register_clkdev(clk[per2_gate], "per", "mxc-mmc.0");
-	clk_register_clkdev(clk[sdhc1_ipg_gate], "ipg", "mxc-mmc.0");
-	clk_register_clkdev(clk[per2_gate], "per", "mxc-mmc.1");
-	clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "mxc-mmc.1");
-	clk_register_clkdev(clk[per2_gate], "per", "mxc-mmc.2");
-	clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "mxc-mmc.2");
+	clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.0");
+	clk_register_clkdev(clk[sdhc1_ipg_gate], "ipg", "imx21-mmc.0");
+	clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.1");
+	clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "imx21-mmc.1");
+	clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.2");
+	clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "imx21-mmc.2");
 	clk_register_clkdev(clk[cspi1_ipg_gate], NULL, "imx27-cspi.0");
 	clk_register_clkdev(clk[cspi2_ipg_gate], NULL, "imx27-cspi.1");
 	clk_register_clkdev(clk[cspi3_ipg_gate], NULL, "imx27-cspi.2");
-	clk_register_clkdev(clk[per3_gate], "per", "imx-fb.0");
-	clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx-fb.0");
-	clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx-fb.0");
-	clk_register_clkdev(clk[csi_ahb_gate], "ahb", "mx2-camera.0");
+	clk_register_clkdev(clk[per3_gate], "per", "imx21-fb.0");
+	clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx21-fb.0");
+	clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx21-fb.0");
+	clk_register_clkdev(clk[csi_ahb_gate], "ahb", "imx27-camera.0");
 	clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
 	clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc");
 	clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc");
@@ -238,27 +238,27 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.2");
 	clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0");
 	clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1");
-	clk_register_clkdev(clk[nfc_baud_gate], NULL, "mxc_nand.0");
+	clk_register_clkdev(clk[nfc_baud_gate], NULL, "imx27-nand.0");
 	clk_register_clkdev(clk[vpu_baud_gate], "per", "coda-imx27.0");
 	clk_register_clkdev(clk[vpu_ahb_gate], "ahb", "coda-imx27.0");
-	clk_register_clkdev(clk[dma_ahb_gate], "ahb", "imx-dma");
-	clk_register_clkdev(clk[dma_ipg_gate], "ipg", "imx-dma");
+	clk_register_clkdev(clk[dma_ahb_gate], "ahb", "imx27-dma");
+	clk_register_clkdev(clk[dma_ipg_gate], "ipg", "imx27-dma");
 	clk_register_clkdev(clk[fec_ipg_gate], "ipg", "imx27-fec.0");
 	clk_register_clkdev(clk[fec_ahb_gate], "ahb", "imx27-fec.0");
 	clk_register_clkdev(clk[wdog_ipg_gate], NULL, "imx2-wdt.0");
-	clk_register_clkdev(clk[i2c1_ipg_gate], NULL, "imx-i2c.0");
-	clk_register_clkdev(clk[i2c2_ipg_gate], NULL, "imx-i2c.1");
+	clk_register_clkdev(clk[i2c1_ipg_gate], NULL, "imx21-i2c.0");
+	clk_register_clkdev(clk[i2c2_ipg_gate], NULL, "imx21-i2c.1");
 	clk_register_clkdev(clk[owire_ipg_gate], NULL, "mxc_w1.0");
 	clk_register_clkdev(clk[kpp_ipg_gate], NULL, "imx-keypad");
-	clk_register_clkdev(clk[emma_ahb_gate], "emma-ahb", "mx2-camera.0");
-	clk_register_clkdev(clk[emma_ipg_gate], "emma-ipg", "mx2-camera.0");
+	clk_register_clkdev(clk[emma_ahb_gate], "emma-ahb", "imx27-camera.0");
+	clk_register_clkdev(clk[emma_ipg_gate], "emma-ipg", "imx27-camera.0");
 	clk_register_clkdev(clk[emma_ahb_gate], "ahb", "m2m-emmaprp.0");
 	clk_register_clkdev(clk[emma_ipg_gate], "ipg", "m2m-emmaprp.0");
 	clk_register_clkdev(clk[iim_ipg_gate], "iim", NULL);
 	clk_register_clkdev(clk[gpio_ipg_gate], "gpio", NULL);
 	clk_register_clkdev(clk[brom_ahb_gate], "brom", NULL);
 	clk_register_clkdev(clk[ata_ahb_gate], "ata", NULL);
-	clk_register_clkdev(clk[rtc_ipg_gate], NULL, "mxc_rtc");
+	clk_register_clkdev(clk[rtc_ipg_gate], NULL, "imx21-rtc");
 	clk_register_clkdev(clk[scc_ipg_gate], "scc", NULL);
 	clk_register_clkdev(clk[cpu_div], "cpu", NULL);
 	clk_register_clkdev(clk[emi_ahb_gate], "emi_ahb" , NULL);
diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c
index 1253af2d997..8be64e0a4ac 100644
--- a/arch/arm/mach-imx/clk-imx31.c
+++ b/arch/arm/mach-imx/clk-imx31.c
@@ -22,12 +22,11 @@
 #include <linux/err.h>
 #include <linux/of.h>
 
-#include <mach/hardware.h>
-#include <mach/mx31.h>
-#include <mach/common.h>
-
 #include "clk.h"
+#include "common.h"
 #include "crmregs-imx3.h"
+#include "hardware.h"
+#include "mx31.h"
 
 static const char *mcu_main_sel[] = { "spll", "mpll", };
 static const char *per_sel[] = { "per_div", "ipg", };
@@ -124,10 +123,10 @@ int __init mx31_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[cspi3_gate], NULL, "imx31-cspi.2");
 	clk_register_clkdev(clk[pwm_gate], "pwm", NULL);
 	clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
-	clk_register_clkdev(clk[rtc_gate], NULL, "mxc_rtc");
+	clk_register_clkdev(clk[rtc_gate], NULL, "imx21-rtc");
 	clk_register_clkdev(clk[epit1_gate], "epit", NULL);
 	clk_register_clkdev(clk[epit2_gate], "epit", NULL);
-	clk_register_clkdev(clk[nfc], NULL, "mxc_nand.0");
+	clk_register_clkdev(clk[nfc], NULL, "imx27-nand.0");
 	clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core");
 	clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb");
 	clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad");
@@ -155,12 +154,12 @@ int __init mx31_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.3");
 	clk_register_clkdev(clk[uart5_gate], "per", "imx21-uart.4");
 	clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.4");
-	clk_register_clkdev(clk[i2c1_gate], NULL, "imx-i2c.0");
-	clk_register_clkdev(clk[i2c2_gate], NULL, "imx-i2c.1");
-	clk_register_clkdev(clk[i2c3_gate], NULL, "imx-i2c.2");
+	clk_register_clkdev(clk[i2c1_gate], NULL, "imx21-i2c.0");
+	clk_register_clkdev(clk[i2c2_gate], NULL, "imx21-i2c.1");
+	clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2");
 	clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1.0");
-	clk_register_clkdev(clk[sdhc1_gate], NULL, "mxc-mmc.0");
-	clk_register_clkdev(clk[sdhc2_gate], NULL, "mxc-mmc.1");
+	clk_register_clkdev(clk[sdhc1_gate], NULL, "imx31-mmc.0");
+	clk_register_clkdev(clk[sdhc2_gate], NULL, "imx31-mmc.1");
 	clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0");
 	clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1");
 	clk_register_clkdev(clk[firi_gate], "firi", NULL);
diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c
index 177259b523c..66f3d65ea27 100644
--- a/arch/arm/mach-imx/clk-imx35.c
+++ b/arch/arm/mach-imx/clk-imx35.c
@@ -14,11 +14,10 @@
 #include <linux/of.h>
 #include <linux/err.h>
 
-#include <mach/hardware.h>
-#include <mach/common.h>
-
 #include "crmregs-imx3.h"
 #include "clk.h"
+#include "common.h"
+#include "hardware.h"
 
 struct arm_ahb_div {
 	unsigned char arm, ahb, sel;
@@ -226,9 +225,9 @@ int __init mx35_clocks_init()
 	clk_register_clkdev(clk[fec_gate], NULL, "imx27-fec.0");
 	clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0");
 	clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
-	clk_register_clkdev(clk[i2c1_gate], NULL, "imx-i2c.0");
-	clk_register_clkdev(clk[i2c2_gate], NULL, "imx-i2c.1");
-	clk_register_clkdev(clk[i2c3_gate], NULL, "imx-i2c.2");
+	clk_register_clkdev(clk[i2c1_gate], NULL, "imx21-i2c.0");
+	clk_register_clkdev(clk[i2c2_gate], NULL, "imx21-i2c.1");
+	clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2");
 	clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core");
 	clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb");
 	clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad");
@@ -256,7 +255,7 @@ int __init mx35_clocks_init()
 	clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
 	clk_register_clkdev(clk[usbotg_gate], "ahb", "fsl-usb2-udc");
 	clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
-	clk_register_clkdev(clk[nfc_div], NULL, "mxc_nand.0");
+	clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0");
 	clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
 
 	clk_prepare_enable(clk[spba_gate]);
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index a0bf84803ea..abb71f6b4d6 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -14,11 +14,10 @@
 #include <linux/of.h>
 #include <linux/err.h>
 
-#include <mach/hardware.h>
-#include <mach/common.h>
-
 #include "crm-regs-imx5.h"
 #include "clk.h"
+#include "common.h"
+#include "hardware.h"
 
 /* Low-power Audio Playback Mode clock */
 static const char *lp_apm_sel[] = { "osc", };
@@ -258,8 +257,8 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
 	clk_register_clkdev(clk[cspi_ipg_gate], NULL, "imx35-cspi.2");
 	clk_register_clkdev(clk[pwm1_ipg_gate], "pwm", "mxc_pwm.0");
 	clk_register_clkdev(clk[pwm2_ipg_gate], "pwm", "mxc_pwm.1");
-	clk_register_clkdev(clk[i2c1_gate], NULL, "imx-i2c.0");
-	clk_register_clkdev(clk[i2c2_gate], NULL, "imx-i2c.1");
+	clk_register_clkdev(clk[i2c1_gate], NULL, "imx21-i2c.0");
+	clk_register_clkdev(clk[i2c2_gate], NULL, "imx21-i2c.1");
 	clk_register_clkdev(clk[usboh3_per_gate], "per", "mxc-ehci.0");
 	clk_register_clkdev(clk[usboh3_gate], "ipg", "mxc-ehci.0");
 	clk_register_clkdev(clk[usboh3_gate], "ahb", "mxc-ehci.0");
@@ -272,7 +271,7 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
 	clk_register_clkdev(clk[usboh3_per_gate], "per", "fsl-usb2-udc");
 	clk_register_clkdev(clk[usboh3_gate], "ipg", "fsl-usb2-udc");
 	clk_register_clkdev(clk[usboh3_gate], "ahb", "fsl-usb2-udc");
-	clk_register_clkdev(clk[nfc_gate], NULL, "mxc_nand");
+	clk_register_clkdev(clk[nfc_gate], NULL, "imx51-nand");
 	clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0");
 	clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1");
 	clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "imx-ssi.2");
@@ -345,7 +344,7 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 
 	mx5_clocks_common_init(rate_ckil, rate_osc, rate_ckih1, rate_ckih2);
 
-	clk_register_clkdev(clk[hsi2c_gate], NULL, "imx-i2c.2");
+	clk_register_clkdev(clk[hsi2c_gate], NULL, "imx21-i2c.2");
 	clk_register_clkdev(clk[mx51_mipi], "mipi_hsp", NULL);
 	clk_register_clkdev(clk[vpu_gate], NULL, "imx51-vpu.0");
 	clk_register_clkdev(clk[fec_gate], NULL, "imx27-fec.0");
@@ -440,7 +439,7 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 	mx5_clocks_common_init(rate_ckil, rate_osc, rate_ckih1, rate_ckih2);
 
 	clk_register_clkdev(clk[vpu_gate], NULL, "imx53-vpu.0");
-	clk_register_clkdev(clk[i2c3_gate], NULL, "imx-i2c.2");
+	clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2");
 	clk_register_clkdev(clk[fec_gate], NULL, "imx25-fec.0");
 	clk_register_clkdev(clk[ipu_gate], "bus", "imx53-ipu");
 	clk_register_clkdev(clk[ipu_di0_gate], "di0", "imx53-ipu");
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 3ec242f3341..5f9f5919dd7 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -19,8 +19,9 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
-#include <mach/common.h>
+
 #include "clk.h"
+#include "common.h"
 
 #define CCGR0				0x68
 #define CCGR1				0x6c
@@ -405,6 +406,7 @@ int __init mx6q_clocks_init(void)
 	clk_register_clkdev(clk[cko1_sel], "cko1_sel", NULL);
 	clk_register_clkdev(clk[ahb], "ahb", NULL);
 	clk_register_clkdev(clk[cko1], "cko1", NULL);
+	clk_register_clkdev(clk[arm], NULL, "cpu0");
 
 	/*
 	 * The gpmi needs 100MHz frequency in the EDO/Sync mode,
diff --git a/arch/arm/mach-imx/clk-pllv1.c b/arch/arm/mach-imx/clk-pllv1.c
index 02be7317891..abff350ba24 100644
--- a/arch/arm/mach-imx/clk-pllv1.c
+++ b/arch/arm/mach-imx/clk-pllv1.c
@@ -4,10 +4,10 @@
 #include <linux/slab.h>
 #include <linux/kernel.h>
 #include <linux/err.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
 
 #include "clk.h"
+#include "common.h"
+#include "hardware.h"
 
 /**
  * pll v1
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/mach-imx/common.h
index ead901814c0..7191ab4434e 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -66,6 +66,7 @@ extern int mx51_clocks_init(unsigned long ckil, unsigned long osc,
 			unsigned long ckih1, unsigned long ckih2);
 extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
 			unsigned long ckih1, unsigned long ckih2);
+extern int mx25_clocks_init_dt(void);
 extern int mx27_clocks_init_dt(void);
 extern int mx31_clocks_init_dt(void);
 extern int mx51_clocks_init_dt(void);
@@ -79,6 +80,7 @@ extern void mxc_arch_reset_init(void __iomem *);
 extern int mx53_revision(void);
 extern int mx53_display_revision(void);
 extern void imx_set_aips(void __iomem *);
+extern int mxc_device_init(void);
 
 enum mxc_cpu_pwr_mode {
 	WAIT_CLOCKED,		/* wfi only */
diff --git a/arch/arm/mach-imx/cpu-imx25.c b/arch/arm/mach-imx/cpu-imx25.c
index 6914bcbf84e..96ec64b5ff7 100644
--- a/arch/arm/mach-imx/cpu-imx25.c
+++ b/arch/arm/mach-imx/cpu-imx25.c
@@ -11,8 +11,9 @@
  */
 #include <linux/module.h>
 #include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/iim.h>
+
+#include "iim.h"
+#include "hardware.h"
 
 static int mx25_cpu_rev = -1;
 
diff --git a/arch/arm/mach-imx/cpu-imx27.c b/arch/arm/mach-imx/cpu-imx27.c
index ff38e1505f6..fe8d36f7e30 100644
--- a/arch/arm/mach-imx/cpu-imx27.c
+++ b/arch/arm/mach-imx/cpu-imx27.c
@@ -24,7 +24,7 @@
 #include <linux/io.h>
 #include <linux/module.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
 
 static int mx27_cpu_rev = -1;
 static int mx27_cpu_partnumber;
diff --git a/arch/arm/mach-imx/cpu-imx31.c b/arch/arm/mach-imx/cpu-imx31.c
index 3f2345f0cda..fde1860a252 100644
--- a/arch/arm/mach-imx/cpu-imx31.c
+++ b/arch/arm/mach-imx/cpu-imx31.c
@@ -11,9 +11,10 @@
 
 #include <linux/module.h>
 #include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/iim.h>
-#include <mach/common.h>
+
+#include "common.h"
+#include "hardware.h"
+#include "iim.h"
 
 static int mx31_cpu_rev = -1;
 
diff --git a/arch/arm/mach-imx/cpu-imx35.c b/arch/arm/mach-imx/cpu-imx35.c
index 846e46eb8cb..ec3aaa098c1 100644
--- a/arch/arm/mach-imx/cpu-imx35.c
+++ b/arch/arm/mach-imx/cpu-imx35.c
@@ -10,8 +10,9 @@
  */
 #include <linux/module.h>
 #include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/iim.h>
+
+#include "hardware.h"
+#include "iim.h"
 
 static int mx35_cpu_rev = -1;
 
diff --git a/arch/arm/mach-imx/cpu-imx5.c b/arch/arm/mach-imx/cpu-imx5.c
index 8eb15a2fcaf..d88760014ff 100644
--- a/arch/arm/mach-imx/cpu-imx5.c
+++ b/arch/arm/mach-imx/cpu-imx5.c
@@ -15,9 +15,10 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/module.h>
-#include <mach/hardware.h>
 #include <linux/io.h>
 
+#include "hardware.h"
+
 static int mx5_cpu_rev = -1;
 
 #define IIM_SREV 0x24
diff --git a/arch/arm/plat-mxc/cpu.c b/arch/arm/mach-imx/cpu.c
index 220dd6f9312..03fcbd08259 100644
--- a/arch/arm/plat-mxc/cpu.c
+++ b/arch/arm/mach-imx/cpu.c
@@ -1,7 +1,8 @@
 
 #include <linux/module.h>
 #include <linux/io.h>
-#include <mach/hardware.h>
+
+#include "hardware.h"
 
 unsigned int __mxc_cpu_type;
 EXPORT_SYMBOL(__mxc_cpu_type);
diff --git a/arch/arm/mach-imx/cpu_op-mx51.c b/arch/arm/mach-imx/cpu_op-mx51.c
index 7b92cd6da6d..b9ef692b61a 100644
--- a/arch/arm/mach-imx/cpu_op-mx51.c
+++ b/arch/arm/mach-imx/cpu_op-mx51.c
@@ -13,9 +13,10 @@
 
 #include <linux/bug.h>
 #include <linux/types.h>
-#include <mach/hardware.h>
 #include <linux/kernel.h>
 
+#include "hardware.h"
+
 static struct cpu_op mx51_cpu_op[] = {
 	{
 	.cpu_rate = 160000000,},
diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/mach-imx/cpufreq.c
index b5b6f808313..36e8b399447 100644
--- a/arch/arm/plat-mxc/cpufreq.c
+++ b/arch/arm/mach-imx/cpufreq.c
@@ -22,7 +22,8 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/slab.h>
-#include <mach/hardware.h>
+
+#include "hardware.h"
 
 #define CLK32_FREQ	32768
 #define NANOSECOND	(1000 * 1000 * 1000)
diff --git a/arch/arm/plat-mxc/cpuidle.c b/arch/arm/mach-imx/cpuidle.c
index d4cb511a44a..d4cb511a44a 100644
--- a/arch/arm/plat-mxc/cpuidle.c
+++ b/arch/arm/mach-imx/cpuidle.c
diff --git a/arch/arm/plat-mxc/include/mach/cpuidle.h b/arch/arm/mach-imx/cpuidle.h
index bc932d1af37..bc932d1af37 100644
--- a/arch/arm/plat-mxc/include/mach/cpuidle.h
+++ b/arch/arm/mach-imx/cpuidle.h
diff --git a/arch/arm/mach-imx/devices-imx1.h b/arch/arm/mach-imx/devices-imx1.h
index 3aad1e70de9..f9b5afc6bcd 100644
--- a/arch/arm/mach-imx/devices-imx1.h
+++ b/arch/arm/mach-imx/devices-imx1.h
@@ -6,8 +6,7 @@
  * the terms of the GNU General Public License version 2 as published by the
  * Free Software Foundation.
  */
-#include <mach/mx1.h>
-#include <mach/devices-common.h>
+#include "devices/devices-common.h"
 
 extern const struct imx_imx_fb_data imx1_imx_fb_data;
 #define imx1_add_imx_fb(pdata) \
diff --git a/arch/arm/mach-imx/devices-imx21.h b/arch/arm/mach-imx/devices-imx21.h
index 93ece55f75d..bd939328015 100644
--- a/arch/arm/mach-imx/devices-imx21.h
+++ b/arch/arm/mach-imx/devices-imx21.h
@@ -6,8 +6,7 @@
  * the terms of the GNU General Public License version 2 as published by the
  * Free Software Foundation.
  */
-#include <mach/mx21.h>
-#include <mach/devices-common.h>
+#include "devices/devices-common.h"
 
 extern const struct imx_imx21_hcd_data imx21_imx21_hcd_data;
 #define imx21_add_imx21_hcd(pdata)	\
diff --git a/arch/arm/mach-imx/devices-imx25.h b/arch/arm/mach-imx/devices-imx25.h
index f8e03dd1f11..0d2922bc575 100644
--- a/arch/arm/mach-imx/devices-imx25.h
+++ b/arch/arm/mach-imx/devices-imx25.h
@@ -6,8 +6,7 @@
  * the terms of the GNU General Public License version 2 as published by the
  * Free Software Foundation.
  */
-#include <mach/mx25.h>
-#include <mach/devices-common.h>
+#include "devices/devices-common.h"
 
 extern const struct imx_fec_data imx25_fec_data;
 #define imx25_add_fec(pdata)	\
diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h
index 04822932cdd..8a1ad7972d4 100644
--- a/arch/arm/mach-imx/devices-imx27.h
+++ b/arch/arm/mach-imx/devices-imx27.h
@@ -6,8 +6,7 @@
  * the terms of the GNU General Public License version 2 as published by the
  * Free Software Foundation.
  */
-#include <mach/mx27.h>
-#include <mach/devices-common.h>
+#include "devices/devices-common.h"
 
 extern const struct imx_fec_data imx27_fec_data;
 #define imx27_add_fec(pdata)	\
diff --git a/arch/arm/mach-imx/devices-imx31.h b/arch/arm/mach-imx/devices-imx31.h
index 8b2ceb45bb8..e8d1611bbc8 100644
--- a/arch/arm/mach-imx/devices-imx31.h
+++ b/arch/arm/mach-imx/devices-imx31.h
@@ -6,8 +6,7 @@
  * the terms of the GNU General Public License version 2 as published by the
  * Free Software Foundation.
  */
-#include <mach/mx31.h>
-#include <mach/devices-common.h>
+#include "devices/devices-common.h"
 
 extern const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data;
 #define imx31_add_fsl_usb2_udc(pdata)	\
diff --git a/arch/arm/mach-imx/devices-imx35.h b/arch/arm/mach-imx/devices-imx35.h
index c3e9f206ac2..e2675f1b141 100644
--- a/arch/arm/mach-imx/devices-imx35.h
+++ b/arch/arm/mach-imx/devices-imx35.h
@@ -6,8 +6,7 @@
  * the terms of the GNU General Public License version 2 as published by the
  * Free Software Foundation.
  */
-#include <mach/mx35.h>
-#include <mach/devices-common.h>
+#include "devices/devices-common.h"
 
 extern const struct imx_fec_data imx35_fec_data;
 #define imx35_add_fec(pdata)	\
diff --git a/arch/arm/mach-imx/devices-imx50.h b/arch/arm/mach-imx/devices-imx50.h
index 7216667eaaf..2c290391f29 100644
--- a/arch/arm/mach-imx/devices-imx50.h
+++ b/arch/arm/mach-imx/devices-imx50.h
@@ -18,8 +18,7 @@
  * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
  */
 
-#include <mach/mx50.h>
-#include <mach/devices-common.h>
+#include "devices/devices-common.h"
 
 extern const struct imx_imx_uart_1irq_data imx50_imx_uart_data[];
 #define imx50_add_imx_uart(id, pdata)	\
diff --git a/arch/arm/mach-imx/devices-imx51.h b/arch/arm/mach-imx/devices-imx51.h
index 9f171872519..deee5baee88 100644
--- a/arch/arm/mach-imx/devices-imx51.h
+++ b/arch/arm/mach-imx/devices-imx51.h
@@ -6,8 +6,7 @@
  * the terms of the GNU General Public License version 2 as published by the
  * Free Software Foundation.
  */
-#include <mach/mx51.h>
-#include <mach/devices-common.h>
+#include "devices/devices-common.h"
 
 extern const struct imx_fec_data imx51_fec_data;
 #define imx51_add_fec(pdata)	\
diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig
index a35d9841f49..a35d9841f49 100644
--- a/arch/arm/plat-mxc/devices/Kconfig
+++ b/arch/arm/mach-imx/devices/Kconfig
diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/mach-imx/devices/Makefile
index 76f3195475d..2abe2a5144d 100644
--- a/arch/arm/plat-mxc/devices/Makefile
+++ b/arch/arm/mach-imx/devices/Makefile
@@ -1,3 +1,5 @@
+obj-y := devices.o
+
 obj-$(CONFIG_IMX_HAVE_PLATFORM_FEC) += platform-fec.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_FSL_USB2_UDC) += platform-fsl-usb2-udc.o
diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h
index eaf79d220c9..e4b790b9e2a 100644
--- a/arch/arm/plat-mxc/include/mach/devices-common.h
+++ b/arch/arm/mach-imx/devices/devices-common.h
@@ -108,6 +108,7 @@ struct platform_device *__init imx_add_imxdi_rtc(
 
 #include <linux/platform_data/video-imxfb.h>
 struct imx_imx_fb_data {
+	const char *devid;
 	resource_size_t iobase;
 	resource_size_t iosize;
 	resource_size_t irq;
@@ -118,6 +119,7 @@ struct platform_device *__init imx_add_imx_fb(
 
 #include <linux/platform_data/i2c-imx.h>
 struct imx_imx_i2c_data {
+	const char *devid;
 	int id;
 	resource_size_t iobase;
 	resource_size_t iosize;
@@ -219,6 +221,7 @@ struct platform_device *__init imx_add_mx1_camera(
 
 #include <linux/platform_data/camera-mx2.h>
 struct imx_mx2_camera_data {
+	const char *devid;
 	resource_size_t iobasecsi;
 	resource_size_t iosizecsi;
 	resource_size_t irqcsi;
@@ -244,6 +247,7 @@ struct platform_device *__init imx_add_mxc_ehci(
 
 #include <linux/platform_data/mmc-mxcmmc.h>
 struct imx_mxc_mmc_data {
+	const char *devid;
 	int id;
 	resource_size_t iobase;
 	resource_size_t iosize;
@@ -256,6 +260,7 @@ struct platform_device *__init imx_add_mxc_mmc(
 
 #include <linux/platform_data/mtd-mxc_nand.h>
 struct imx_mxc_nand_data {
+	const char *devid;
 	/*
 	 * id is traditionally 0, but -1 is more appropriate.  We use -1 for new
 	 * machines but don't change existing devices as the nand device usually
@@ -290,6 +295,7 @@ struct platform_device *__init imx_add_mxc_pwm(
 
 /* mxc_rtc */
 struct imx_mxc_rtc_data {
+	const char *devid;
 	resource_size_t iobase;
 	resource_size_t irq;
 };
@@ -326,7 +332,8 @@ struct platform_device *__init imx_add_spi_imx(
 		const struct imx_spi_imx_data *data,
 		const struct spi_imx_master *pdata);
 
-struct platform_device *imx_add_imx_dma(void);
+struct platform_device *imx_add_imx_dma(char *name, resource_size_t iobase,
+					int irq, int irq_err);
 struct platform_device *imx_add_imx_sdma(char *name,
 	resource_size_t iobase, int irq, struct sdma_platform_data *pdata);
 
diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/mach-imx/devices/devices.c
index 4d55a7a26e9..1b37482407f 100644
--- a/arch/arm/plat-mxc/devices.c
+++ b/arch/arm/mach-imx/devices/devices.c
@@ -21,7 +21,6 @@
 #include <linux/init.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
-#include <mach/common.h>
 
 struct device mxc_aips_bus = {
 	.init_name	= "mxc_aips",
@@ -33,7 +32,7 @@ struct device mxc_ahb_bus = {
 	.parent		= &platform_bus,
 };
 
-static int __init mxc_device_init(void)
+int __init mxc_device_init(void)
 {
 	int ret;
 
@@ -46,4 +45,3 @@ static int __init mxc_device_init(void)
 done:
 	return ret;
 }
-core_initcall(mxc_device_init);
diff --git a/arch/arm/plat-mxc/devices/platform-ahci-imx.c b/arch/arm/mach-imx/devices/platform-ahci-imx.c
index ade4a1c4e2a..3d87dd9c284 100644
--- a/arch/arm/plat-mxc/devices/platform-ahci-imx.c
+++ b/arch/arm/mach-imx/devices/platform-ahci-imx.c
@@ -24,8 +24,9 @@
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
 #include <asm/sizes.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+
+#include "../hardware.h"
+#include "devices-common.h"
 
 #define imx_ahci_imx_data_entry_single(soc, _devid)		\
 	{								\
diff --git a/arch/arm/plat-mxc/devices/platform-fec.c b/arch/arm/mach-imx/devices/platform-fec.c
index 0bae44e890d..2cb188ad9a0 100644
--- a/arch/arm/plat-mxc/devices/platform-fec.c
+++ b/arch/arm/mach-imx/devices/platform-fec.c
@@ -8,8 +8,9 @@
  */
 #include <linux/dma-mapping.h>
 #include <asm/sizes.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+
+#include "../hardware.h"
+#include "devices-common.h"
 
 #define imx_fec_data_entry_single(soc, _devid)				\
 	{								\
diff --git a/arch/arm/plat-mxc/devices/platform-flexcan.c b/arch/arm/mach-imx/devices/platform-flexcan.c
index 4e8497af2eb..1078bf0a94e 100644
--- a/arch/arm/plat-mxc/devices/platform-flexcan.c
+++ b/arch/arm/mach-imx/devices/platform-flexcan.c
@@ -5,8 +5,8 @@
  * the terms of the GNU General Public License version 2 as published by the
  * Free Software Foundation.
  */
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
 
 #define imx_flexcan_data_entry_single(soc, _id, _hwid, _size)		\
 	{								\
diff --git a/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
index 848038f301f..37e44398197 100644
--- a/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c
+++ b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
@@ -7,8 +7,9 @@
  * Free Software Foundation.
  */
 #include <linux/dma-mapping.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+
+#include "../hardware.h"
+#include "devices-common.h"
 
 #define imx_fsl_usb2_udc_data_entry_single(soc)				\
 	{								\
diff --git a/arch/arm/plat-mxc/devices/platform-gpio-mxc.c b/arch/arm/mach-imx/devices/platform-gpio-mxc.c
index a7919a24103..26483fa94b7 100644
--- a/arch/arm/plat-mxc/devices/platform-gpio-mxc.c
+++ b/arch/arm/mach-imx/devices/platform-gpio-mxc.c
@@ -6,7 +6,7 @@
  * the terms of the GNU General Public License version 2 as published by the
  * Free Software Foundation.
  */
-#include <mach/devices-common.h>
+#include "devices-common.h"
 
 struct platform_device *__init mxc_register_gpio(char *name, int id,
 	resource_size_t iobase, resource_size_t iosize, int irq, int irq_high)
diff --git a/arch/arm/plat-mxc/devices/platform-gpio_keys.c b/arch/arm/mach-imx/devices/platform-gpio_keys.c
index 1c53a532ea0..486282539c7 100644
--- a/arch/arm/plat-mxc/devices/platform-gpio_keys.c
+++ b/arch/arm/mach-imx/devices/platform-gpio_keys.c
@@ -16,8 +16,9 @@
  * Boston, MA  02110-1301, USA.
  */
 #include <asm/sizes.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+
+#include "../hardware.h"
+#include "devices-common.h"
 
 struct platform_device *__init imx_add_gpio_keys(
 		const struct gpio_keys_platform_data *pdata)
diff --git a/arch/arm/plat-mxc/devices/platform-imx-dma.c b/arch/arm/mach-imx/devices/platform-imx-dma.c
index 7fa7e9c9246..ccdb5dc4ddb 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-dma.c
+++ b/arch/arm/mach-imx/devices/platform-imx-dma.c
@@ -6,12 +6,29 @@
  * the terms of the GNU General Public License version 2 as published by the
  * Free Software Foundation.
  */
-#include <mach/devices-common.h>
+#include "devices-common.h"
 
-struct platform_device __init __maybe_unused *imx_add_imx_dma(void)
+struct platform_device __init __maybe_unused *imx_add_imx_dma(char *name,
+	resource_size_t iobase, int irq, int irq_err)
 {
+	struct resource res[] = {
+		{
+			.start = iobase,
+			.end = iobase + SZ_4K - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = irq,
+			.end = irq,
+			.flags = IORESOURCE_IRQ,
+		}, {
+			.start = irq_err,
+			.end = irq_err,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
 	return platform_device_register_resndata(&mxc_ahb_bus,
-			"imx-dma", -1, NULL, 0, NULL, 0);
+			name, -1, res, ARRAY_SIZE(res), NULL, 0);
 }
 
 struct platform_device __init __maybe_unused *imx_add_imx_sdma(char *name,
diff --git a/arch/arm/plat-mxc/devices/platform-imx-fb.c b/arch/arm/mach-imx/devices/platform-imx-fb.c
index 2b0b5e0aa99..10b0ed39f07 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-fb.c
+++ b/arch/arm/mach-imx/devices/platform-imx-fb.c
@@ -7,11 +7,13 @@
  * Free Software Foundation.
  */
 #include <linux/dma-mapping.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
 
-#define imx_imx_fb_data_entry_single(soc, _size)			\
+#include "../hardware.h"
+#include "devices-common.h"
+
+#define imx_imx_fb_data_entry_single(soc, _devid, _size)		\
 	{								\
+		.devid = _devid,					\
 		.iobase = soc ## _LCDC_BASE_ADDR,			\
 		.iosize = _size,					\
 		.irq = soc ## _INT_LCDC,				\
@@ -19,22 +21,22 @@
 
 #ifdef CONFIG_SOC_IMX1
 const struct imx_imx_fb_data imx1_imx_fb_data __initconst =
-	imx_imx_fb_data_entry_single(MX1, SZ_4K);
+	imx_imx_fb_data_entry_single(MX1, "imx1-fb", SZ_4K);
 #endif /* ifdef CONFIG_SOC_IMX1 */
 
 #ifdef CONFIG_SOC_IMX21
 const struct imx_imx_fb_data imx21_imx_fb_data __initconst =
-	imx_imx_fb_data_entry_single(MX21, SZ_4K);
+	imx_imx_fb_data_entry_single(MX21, "imx21-fb", SZ_4K);
 #endif /* ifdef CONFIG_SOC_IMX21 */
 
 #ifdef CONFIG_SOC_IMX25
 const struct imx_imx_fb_data imx25_imx_fb_data __initconst =
-	imx_imx_fb_data_entry_single(MX25, SZ_16K);
+	imx_imx_fb_data_entry_single(MX25, "imx21-fb", SZ_16K);
 #endif /* ifdef CONFIG_SOC_IMX25 */
 
 #ifdef CONFIG_SOC_IMX27
 const struct imx_imx_fb_data imx27_imx_fb_data __initconst =
-	imx_imx_fb_data_entry_single(MX27, SZ_4K);
+	imx_imx_fb_data_entry_single(MX27, "imx21-fb", SZ_4K);
 #endif /* ifdef CONFIG_SOC_IMX27 */
 
 struct platform_device *__init imx_add_imx_fb(
diff --git a/arch/arm/plat-mxc/devices/platform-imx-i2c.c b/arch/arm/mach-imx/devices/platform-imx-i2c.c
index 19ad580c0be..8e30e5703cd 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-i2c.c
+++ b/arch/arm/mach-imx/devices/platform-imx-i2c.c
@@ -6,34 +6,35 @@
  * the terms of the GNU General Public License version 2 as published by the
  * Free Software Foundation.
  */
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
 
-#define imx_imx_i2c_data_entry_single(soc, _id, _hwid, _size)		\
+#define imx_imx_i2c_data_entry_single(soc, _devid, _id, _hwid, _size)	\
 	{								\
+		.devid = _devid,					\
 		.id = _id,						\
 		.iobase = soc ## _I2C ## _hwid ## _BASE_ADDR,		\
 		.iosize = _size,					\
 		.irq = soc ## _INT_I2C ## _hwid,			\
 	}
 
-#define imx_imx_i2c_data_entry(soc, _id, _hwid, _size)			\
-	[_id] = imx_imx_i2c_data_entry_single(soc, _id, _hwid, _size)
+#define imx_imx_i2c_data_entry(soc, _devid, _id, _hwid, _size)		\
+	[_id] = imx_imx_i2c_data_entry_single(soc, _devid, _id, _hwid, _size)
 
 #ifdef CONFIG_SOC_IMX1
 const struct imx_imx_i2c_data imx1_imx_i2c_data __initconst =
-	imx_imx_i2c_data_entry_single(MX1, 0, , SZ_4K);
+	imx_imx_i2c_data_entry_single(MX1, "imx1-i2c", 0, , SZ_4K);
 #endif /* ifdef CONFIG_SOC_IMX1 */
 
 #ifdef CONFIG_SOC_IMX21
 const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst =
-	imx_imx_i2c_data_entry_single(MX21, 0, , SZ_4K);
+	imx_imx_i2c_data_entry_single(MX21, "imx21-i2c", 0, , SZ_4K);
 #endif /* ifdef CONFIG_SOC_IMX21 */
 
 #ifdef CONFIG_SOC_IMX25
 const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst = {
 #define imx25_imx_i2c_data_entry(_id, _hwid)				\
-	imx_imx_i2c_data_entry(MX25, _id, _hwid, SZ_16K)
+	imx_imx_i2c_data_entry(MX25, "imx21-i2c", _id, _hwid, SZ_16K)
 	imx25_imx_i2c_data_entry(0, 1),
 	imx25_imx_i2c_data_entry(1, 2),
 	imx25_imx_i2c_data_entry(2, 3),
@@ -43,7 +44,7 @@ const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst = {
 #ifdef CONFIG_SOC_IMX27
 const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst = {
 #define imx27_imx_i2c_data_entry(_id, _hwid)				\
-	imx_imx_i2c_data_entry(MX27, _id, _hwid, SZ_4K)
+	imx_imx_i2c_data_entry(MX27, "imx21-i2c", _id, _hwid, SZ_4K)
 	imx27_imx_i2c_data_entry(0, 1),
 	imx27_imx_i2c_data_entry(1, 2),
 };
@@ -52,7 +53,7 @@ const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst = {
 #ifdef CONFIG_SOC_IMX31
 const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst = {
 #define imx31_imx_i2c_data_entry(_id, _hwid)				\
-	imx_imx_i2c_data_entry(MX31, _id, _hwid, SZ_4K)
+	imx_imx_i2c_data_entry(MX31, "imx21-i2c", _id, _hwid, SZ_4K)
 	imx31_imx_i2c_data_entry(0, 1),
 	imx31_imx_i2c_data_entry(1, 2),
 	imx31_imx_i2c_data_entry(2, 3),
@@ -62,7 +63,7 @@ const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst = {
 #ifdef CONFIG_SOC_IMX35
 const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst = {
 #define imx35_imx_i2c_data_entry(_id, _hwid)				\
-	imx_imx_i2c_data_entry(MX35, _id, _hwid, SZ_4K)
+	imx_imx_i2c_data_entry(MX35, "imx21-i2c", _id, _hwid, SZ_4K)
 	imx35_imx_i2c_data_entry(0, 1),
 	imx35_imx_i2c_data_entry(1, 2),
 	imx35_imx_i2c_data_entry(2, 3),
@@ -72,7 +73,7 @@ const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst = {
 #ifdef CONFIG_SOC_IMX50
 const struct imx_imx_i2c_data imx50_imx_i2c_data[] __initconst = {
 #define imx50_imx_i2c_data_entry(_id, _hwid)				\
-	imx_imx_i2c_data_entry(MX50, _id, _hwid, SZ_4K)
+	imx_imx_i2c_data_entry(MX50, "imx21-i2c", _id, _hwid, SZ_4K)
 	imx50_imx_i2c_data_entry(0, 1),
 	imx50_imx_i2c_data_entry(1, 2),
 	imx50_imx_i2c_data_entry(2, 3),
@@ -82,10 +83,11 @@ const struct imx_imx_i2c_data imx50_imx_i2c_data[] __initconst = {
 #ifdef CONFIG_SOC_IMX51
 const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst = {
 #define imx51_imx_i2c_data_entry(_id, _hwid)				\
-	imx_imx_i2c_data_entry(MX51, _id, _hwid, SZ_4K)
+	imx_imx_i2c_data_entry(MX51, "imx21-i2c", _id, _hwid, SZ_4K)
 	imx51_imx_i2c_data_entry(0, 1),
 	imx51_imx_i2c_data_entry(1, 2),
 	{
+		.devid = "imx21-i2c",
 		.id = 2,
 		.iobase = MX51_HSI2C_DMA_BASE_ADDR,
 		.iosize = SZ_16K,
@@ -97,7 +99,7 @@ const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst = {
 #ifdef CONFIG_SOC_IMX53
 const struct imx_imx_i2c_data imx53_imx_i2c_data[] __initconst = {
 #define imx53_imx_i2c_data_entry(_id, _hwid)				\
-	imx_imx_i2c_data_entry(MX53, _id, _hwid, SZ_4K)
+	imx_imx_i2c_data_entry(MX53, "imx21-i2c", _id, _hwid, SZ_4K)
 	imx53_imx_i2c_data_entry(0, 1),
 	imx53_imx_i2c_data_entry(1, 2),
 	imx53_imx_i2c_data_entry(2, 3),
@@ -120,7 +122,7 @@ struct platform_device *__init imx_add_imx_i2c(
 		},
 	};
 
-	return imx_add_platform_device("imx-i2c", data->id,
+	return imx_add_platform_device(data->devid, data->id,
 			res, ARRAY_SIZE(res),
 			pdata, sizeof(*pdata));
 }
diff --git a/arch/arm/plat-mxc/devices/platform-imx-keypad.c b/arch/arm/mach-imx/devices/platform-imx-keypad.c
index 479c3e9f771..8f22a4c98a4 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-keypad.c
+++ b/arch/arm/mach-imx/devices/platform-imx-keypad.c
@@ -6,8 +6,8 @@
  * the terms of the GNU General Public License version 2 as published by the
  * Free Software Foundation.
  */
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
 
 #define imx_imx_keypad_data_entry_single(soc, _size)			\
 	{								\
diff --git a/arch/arm/plat-mxc/devices/platform-imx-ssi.c b/arch/arm/mach-imx/devices/platform-imx-ssi.c
index 21c6f30e101..bfcb8f3dfa8 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-ssi.c
+++ b/arch/arm/mach-imx/devices/platform-imx-ssi.c
@@ -6,8 +6,8 @@
  * the terms of the GNU General Public License version 2 as published by the
  * Free Software Foundation.
  */
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
 
 #define imx_imx_ssi_data_entry(soc, _id, _hwid, _size)			\
 	[_id] = {							\
diff --git a/arch/arm/plat-mxc/devices/platform-imx-uart.c b/arch/arm/mach-imx/devices/platform-imx-uart.c
index d390f00bd29..67bf866a2cb 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-uart.c
+++ b/arch/arm/mach-imx/devices/platform-imx-uart.c
@@ -6,8 +6,8 @@
  * the terms of the GNU General Public License version 2 as published by the
  * Free Software Foundation.
  */
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
 
 #define imx_imx_uart_3irq_data_entry(soc, _id, _hwid, _size)		\
 	[_id] = {							\
diff --git a/arch/arm/plat-mxc/devices/platform-imx2-wdt.c b/arch/arm/mach-imx/devices/platform-imx2-wdt.c
index 5e07ef2bf1c..ec75d641368 100644
--- a/arch/arm/plat-mxc/devices/platform-imx2-wdt.c
+++ b/arch/arm/mach-imx/devices/platform-imx2-wdt.c
@@ -7,8 +7,9 @@
  * Free Software Foundation.
  */
 #include <asm/sizes.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+
+#include "../hardware.h"
+#include "devices-common.h"
 
 #define imx_imx2_wdt_data_entry_single(soc, _id, _hwid, _size)		\
 	{								\
diff --git a/arch/arm/plat-mxc/devices/platform-imx21-hcd.c b/arch/arm/mach-imx/devices/platform-imx21-hcd.c
index 5770a42f33b..30c81616a9a 100644
--- a/arch/arm/plat-mxc/devices/platform-imx21-hcd.c
+++ b/arch/arm/mach-imx/devices/platform-imx21-hcd.c
@@ -6,8 +6,8 @@
  * the terms of the GNU General Public License version 2 as published by the
  * Free Software Foundation.
  */
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
 
 #define imx_imx21_hcd_data_entry_single(soc)				\
 	{								\
diff --git a/arch/arm/plat-mxc/devices/platform-imx27-coda.c b/arch/arm/mach-imx/devices/platform-imx27-coda.c
index 8b12aacdf39..25bebc29e54 100644
--- a/arch/arm/plat-mxc/devices/platform-imx27-coda.c
+++ b/arch/arm/mach-imx/devices/platform-imx27-coda.c
@@ -7,8 +7,8 @@
  * Free Software Foundation.
  */
 
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
 
 #ifdef CONFIG_SOC_IMX27
 const struct imx_imx27_coda_data imx27_coda_data __initconst = {
diff --git a/arch/arm/plat-mxc/devices/platform-imx_udc.c b/arch/arm/mach-imx/devices/platform-imx_udc.c
index 6fd675dfce1..5ced7e4e2c7 100644
--- a/arch/arm/plat-mxc/devices/platform-imx_udc.c
+++ b/arch/arm/mach-imx/devices/platform-imx_udc.c
@@ -6,8 +6,8 @@
  * the terms of the GNU General Public License version 2 as published by the
  * Free Software Foundation.
  */
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
 
 #define imx_imx_udc_data_entry_single(soc, _size)			\
 	{								\
diff --git a/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c b/arch/arm/mach-imx/devices/platform-imxdi_rtc.c
index 805336fdc25..5bb490d556e 100644
--- a/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c
+++ b/arch/arm/mach-imx/devices/platform-imxdi_rtc.c
@@ -7,8 +7,9 @@
  * Free Software Foundation.
  */
 #include <asm/sizes.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+
+#include "../hardware.h"
+#include "devices-common.h"
 
 #define imx_imxdi_rtc_data_entry_single(soc)				\
 	{								\
diff --git a/arch/arm/plat-mxc/devices/platform-ipu-core.c b/arch/arm/mach-imx/devices/platform-ipu-core.c
index d1e33cc6f12..fc4dd7cedc1 100644
--- a/arch/arm/plat-mxc/devices/platform-ipu-core.c
+++ b/arch/arm/mach-imx/devices/platform-ipu-core.c
@@ -7,8 +7,9 @@
  * Free Software Foundation.
  */
 #include <linux/dma-mapping.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+
+#include "../hardware.h"
+#include "devices-common.h"
 
 #define imx_ipu_core_entry_single(soc)					\
 {									\
diff --git a/arch/arm/plat-mxc/devices/platform-mx1-camera.c b/arch/arm/mach-imx/devices/platform-mx1-camera.c