diff options
Diffstat (limited to 'drivers/net/wireless/ath/carl9170/usb.c')
| -rw-r--r-- | drivers/net/wireless/ath/carl9170/usb.c | 33 |
1 files changed, 19 insertions, 14 deletions
diff --git a/drivers/net/wireless/ath/carl9170/usb.c b/drivers/net/wireless/ath/carl9170/usb.c index 2fb53d06751..f35c7f30f9a 100644 --- a/drivers/net/wireless/ath/carl9170/usb.c +++ b/drivers/net/wireless/ath/carl9170/usb.c @@ -112,6 +112,8 @@ static struct usb_device_id carl9170_usb_ids[] = { { USB_DEVICE(0x04bb, 0x093f) }, /* NEC WL300NU-G */ { USB_DEVICE(0x0409, 0x0249) }, + /* NEC WL300NU-AG */ + { USB_DEVICE(0x0409, 0x02b4) }, /* AVM FRITZ!WLAN USB Stick N */ { USB_DEVICE(0x057c, 0x8401) }, /* AVM FRITZ!WLAN USB Stick N 2.4 */ @@ -293,6 +295,13 @@ static void carl9170_usb_rx_irq_complete(struct urb *urb) goto resubmit; } + /* + * While the carl9170 firmware does not use this EP, the + * firmware loader in the EEPROM unfortunately does. + * Therefore we need to be ready to handle out-of-band + * responses and traps in case the firmware crashed and + * the loader took over again. + */ carl9170_handle_command_response(ar, urb->transfer_buffer, urb->actual_length); @@ -764,7 +773,7 @@ void carl9170_usb_stop(struct ar9170 *ar) complete_all(&ar->cmd_wait); /* This is required to prevent an early completion on _start */ - INIT_COMPLETION(ar->cmd_wait); + reinit_completion(&ar->cmd_wait); /* * Note: @@ -1067,8 +1076,14 @@ static int carl9170_usb_probe(struct usb_interface *intf, carl9170_set_state(ar, CARL9170_STOPPED); - return request_firmware_nowait(THIS_MODULE, 1, CARL9170FW_NAME, + err = request_firmware_nowait(THIS_MODULE, 1, CARL9170FW_NAME, &ar->udev->dev, GFP_KERNEL, ar, carl9170_usb_firmware_step2); + if (err) { + usb_put_dev(udev); + usb_put_dev(udev); + carl9170_free(ar); + } + return err; } static void carl9170_usb_disconnect(struct usb_interface *intf) @@ -1157,17 +1172,7 @@ static struct usb_driver carl9170_driver = { .resume = carl9170_usb_resume, .reset_resume = carl9170_usb_resume, #endif /* CONFIG_PM */ + .disable_hub_initiated_lpm = 1, }; -static int __init carl9170_usb_init(void) -{ - return usb_register(&carl9170_driver); -} - -static void __exit carl9170_usb_exit(void) -{ - usb_deregister(&carl9170_driver); -} - -module_init(carl9170_usb_init); -module_exit(carl9170_usb_exit); +module_usb_driver(carl9170_driver); |