diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath9k/main.c')
| -rw-r--r-- | drivers/net/wireless/ath/ath9k/main.c | 2885 |
1 files changed, 2885 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c new file mode 100644 index 00000000000..f7baa406918 --- /dev/null +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -0,0 +1,2885 @@ +/* + * Copyright (c) 2008-2009 Atheros Communications Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include <linux/nl80211.h> +#include "ath9k.h" + +#define ATH_PCI_VERSION "0.1" + +static char *dev_info = "ath9k"; + +MODULE_AUTHOR("Atheros Communications"); +MODULE_DESCRIPTION("Support for Atheros 802.11n wireless LAN cards."); +MODULE_SUPPORTED_DEVICE("Atheros 802.11n WLAN cards"); +MODULE_LICENSE("Dual BSD/GPL"); + +static int modparam_nohwcrypt; +module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444); +MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption"); + +/* We use the hw_value as an index into our private channel structure */ + +#define CHAN2G(_freq, _idx) { \ + .center_freq = (_freq), \ + .hw_value = (_idx), \ + .max_power = 20, \ +} + +#define CHAN5G(_freq, _idx) { \ + .band = IEEE80211_BAND_5GHZ, \ + .center_freq = (_freq), \ + .hw_value = (_idx), \ + .max_power = 20, \ +} + +/* Some 2 GHz radios are actually tunable on 2312-2732 + * on 5 MHz steps, we support the channels which we know + * we have calibration data for all cards though to make + * this static */ +static struct ieee80211_channel ath9k_2ghz_chantable[] = { + CHAN2G(2412, 0), /* Channel 1 */ + CHAN2G(2417, 1), /* Channel 2 */ + CHAN2G(2422, 2), /* Channel 3 */ + CHAN2G(2427, 3), /* Channel 4 */ + CHAN2G(2432, 4), /* Channel 5 */ + CHAN2G(2437, 5), /* Channel 6 */ + CHAN2G(2442, 6), /* Channel 7 */ + CHAN2G(2447, 7), /* Channel 8 */ + CHAN2G(2452, 8), /* Channel 9 */ + CHAN2G(2457, 9), /* Channel 10 */ + CHAN2G(2462, 10), /* Channel 11 */ + CHAN2G(2467, 11), /* Channel 12 */ + CHAN2G(2472, 12), /* Channel 13 */ + CHAN2G(2484, 13), /* Channel 14 */ +}; + +/* Some 5 GHz radios are actually tunable on XXXX-YYYY + * on 5 MHz steps, we support the channels which we know + * we have calibration data for all cards though to make + * this static */ +static struct ieee80211_channel ath9k_5ghz_chantable[] = { + /* _We_ call this UNII 1 */ + CHAN5G(5180, 14), /* Channel 36 */ + CHAN5G(5200, 15), /* Channel 40 */ + CHAN5G(5220, 16), /* Channel 44 */ + CHAN5G(5240, 17), /* Channel 48 */ + /* _We_ call this UNII 2 */ + CHAN5G(5260, 18), /* Channel 52 */ + CHAN5G(5280, 19), /* Channel 56 */ + CHAN5G(5300, 20), /* Channel 60 */ + CHAN5G(5320, 21), /* Channel 64 */ + /* _We_ call this "Middle band" */ + CHAN5G(5500, 22), /* Channel 100 */ + CHAN5G(5520, 23), /* Channel 104 */ + CHAN5G(5540, 24), /* Channel 108 */ + CHAN5G(5560, 25), /* Channel 112 */ + CHAN5G(5580, 26), /* Channel 116 */ + CHAN5G(5600, 27), /* Channel 120 */ + CHAN5G(5620, 28), /* Channel 124 */ + CHAN5G(5640, 29), /* Channel 128 */ + CHAN5G(5660, 30), /* Channel 132 */ + CHAN5G(5680, 31), /* Channel 136 */ + CHAN5G(5700, 32), /* Channel 140 */ + /* _We_ call this UNII 3 */ + CHAN5G(5745, 33), /* Channel 149 */ + CHAN5G(5765, 34), /* Channel 153 */ + CHAN5G(5785, 35), /* Channel 157 */ + CHAN5G(5805, 36), /* Channel 161 */ + CHAN5G(5825, 37), /* Channel 165 */ +}; + +static void ath_cache_conf_rate(struct ath_softc *sc, + struct ieee80211_conf *conf) +{ + switch (conf->channel->band) { + case IEEE80211_BAND_2GHZ: + if (conf_is_ht20(conf)) + sc->cur_rate_table = + sc->hw_rate_table[ATH9K_MODE_11NG_HT20]; + else if (conf_is_ht40_minus(conf)) + sc->cur_rate_table = + sc->hw_rate_table[ATH9K_MODE_11NG_HT40MINUS]; + else if (conf_is_ht40_plus(conf)) + sc->cur_rate_table = + sc->hw_rate_table[ATH9K_MODE_11NG_HT40PLUS]; + else + sc->cur_rate_table = + sc->hw_rate_table[ATH9K_MODE_11G]; + break; + case IEEE80211_BAND_5GHZ: + if (conf_is_ht20(conf)) + sc->cur_rate_table = + sc->hw_rate_table[ATH9K_MODE_11NA_HT20]; + else if (conf_is_ht40_minus(conf)) + sc->cur_rate_table = + sc->hw_rate_table[ATH9K_MODE_11NA_HT40MINUS]; + else if (conf_is_ht40_plus(conf)) + sc->cur_rate_table = + sc->hw_rate_table[ATH9K_MODE_11NA_HT40PLUS]; + else + sc->cur_rate_table = + sc->hw_rate_table[ATH9K_MODE_11A]; + break; + default: + BUG_ON(1); + break; + } +} + +static void ath_update_txpow(struct ath_softc *sc) +{ + struct ath_hw *ah = sc->sc_ah; + u32 txpow; + + if (sc->curtxpow != sc->config.txpowlimit) { + ath9k_hw_set_txpowerlimit(ah, sc->config.txpowlimit); + /* read back in case value is clamped */ + ath9k_hw_getcapability(ah, ATH9K_CAP_TXPOW, 1, &txpow); + sc->curtxpow = txpow; + } +} + +static u8 parse_mpdudensity(u8 mpdudensity) +{ + /* + * 802.11n D2.0 defined values for "Minimum MPDU Start Spacing": + * 0 for no restriction + * 1 for 1/4 us + * 2 for 1/2 us + * 3 for 1 us + * 4 for 2 us + * 5 for 4 us + * 6 for 8 us + * 7 for 16 us + */ + switch (mpdudensity) { + case 0: + return 0; + case 1: + case 2: + case 3: + /* Our lower layer calculations limit our precision to + 1 microsecond */ + return 1; + case 4: + return 2; + case 5: + return 4; + case 6: + return 8; + case 7: + return 16; + default: + return 0; + } +} + +static void ath_setup_rates(struct ath_softc *sc, enum ieee80211_band band) +{ + const struct ath_rate_table *rate_table = NULL; + struct ieee80211_supported_band *sband; + struct ieee80211_rate *rate; + int i, maxrates; + + switch (band) { + case IEEE80211_BAND_2GHZ: + rate_table = sc->hw_rate_table[ATH9K_MODE_11G]; + break; + case IEEE80211_BAND_5GHZ: + rate_table = sc->hw_rate_table[ATH9K_MODE_11A]; + break; + default: + break; + } + + if (rate_table == NULL) + return; + + sband = &sc->sbands[band]; + rate = sc->rates[band]; + + if (rate_table->rate_cnt > ATH_RATE_MAX) + maxrates = ATH_RATE_MAX; + else + maxrates = rate_table->rate_cnt; + + for (i = 0; i < maxrates; i++) { + rate[i].bitrate = rate_table->info[i].ratekbps / 100; + rate[i].hw_value = rate_table->info[i].ratecode; + if (rate_table->info[i].short_preamble) { + rate[i].hw_value_short = rate_table->info[i].ratecode | + rate_table->info[i].short_preamble; + rate[i].flags = IEEE80211_RATE_SHORT_PREAMBLE; + } + sband->n_bitrates++; + + DPRINTF(sc, ATH_DBG_CONFIG, "Rate: %2dMbps, ratecode: %2d\n", + rate[i].bitrate / 10, rate[i].hw_value); + } +} + +/* + * Set/change channels. If the channel is really being changed, it's done + * by reseting the chip. To accomplish this we must first cleanup any pending + * DMA, then restart stuff. +*/ +int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw, + struct ath9k_channel *hchan) +{ + struct ath_hw *ah = sc->sc_ah; + bool fastcc = true, stopped; + struct ieee80211_channel *channel = hw->conf.channel; + int r; + + if (sc->sc_flags & SC_OP_INVALID) + return -EIO; + + ath9k_ps_wakeup(sc); + + /* + * This is only performed if the channel settings have + * actually changed. + * + * To switch channels clear any pending DMA operations; + * wait long enough for the RX fifo to drain, reset the + * hardware at the new frequency, and then re-enable + * the relevant bits of the h/w. + */ + ath9k_hw_set_interrupts(ah, 0); + ath_drain_all_txq(sc, false); + stopped = ath_stoprecv(sc); + + /* XXX: do not flush receive queue here. We don't want + * to flush data frames already in queue because of + * changing channel. */ + + if (!stopped || (sc->sc_flags & SC_OP_FULL_RESET)) + fastcc = false; + + DPRINTF(sc, ATH_DBG_CONFIG, + "(%u MHz) -> (%u MHz), chanwidth: %d\n", + sc->sc_ah->curchan->channel, + channel->center_freq, sc->tx_chan_width); + + spin_lock_bh(&sc->sc_resetlock); + + r = ath9k_hw_reset(ah, hchan, fastcc); + if (r) { + DPRINTF(sc, ATH_DBG_FATAL, + "Unable to reset channel (%u Mhz) " + "reset status %d\n", + channel->center_freq, r); + spin_unlock_bh(&sc->sc_resetlock); + return r; + } + spin_unlock_bh(&sc->sc_resetlock); + + sc->sc_flags &= ~SC_OP_FULL_RESET; + + if (ath_startrecv(sc) != 0) { + DPRINTF(sc, ATH_DBG_FATAL, + "Unable to restart recv logic\n"); + return -EIO; + } + + ath_cache_conf_rate(sc, &hw->conf); + ath_update_txpow(sc); + ath9k_hw_set_interrupts(ah, sc->imask); + ath9k_ps_restore(sc); + return 0; +} + +/* + * This routine performs the periodic noise floor calibration function + * that is used to adjust and optimize the chip performance. This + * takes environmental changes (location, temperature) into account. + * When the task is complete, it reschedules itself depending on the + * appropriate interval that was calculated. + */ +static void ath_ani_calibrate(unsigned long data) +{ + struct ath_softc *sc = (struct ath_softc *)data; + struct ath_hw *ah = sc->sc_ah; + bool longcal = false; + bool shortcal = false; + bool aniflag = false; + unsigned int timestamp = jiffies_to_msecs(jiffies); + u32 cal_interval, short_cal_interval; + + short_cal_interval = (ah->opmode == NL80211_IFTYPE_AP) ? + ATH_AP_SHORT_CALINTERVAL : ATH_STA_SHORT_CALINTERVAL; + + /* + * don't calibrate when we're scanning. + * we are most likely not on our home channel. + */ + if (sc->sc_flags & SC_OP_SCANNING) + goto set_timer; + + /* Only calibrate if awake */ + if (sc->sc_ah->power_mode != ATH9K_PM_AWAKE) + goto set_timer; + + ath9k_ps_wakeup(sc); + + /* Long calibration runs independently of short calibration. */ + if ((timestamp - sc->ani.longcal_timer) >= ATH_LONG_CALINTERVAL) { + longcal = true; + DPRINTF(sc, ATH_DBG_ANI, "longcal @%lu\n", jiffies); + sc->ani.longcal_timer = timestamp; + } + + /* Short calibration applies only while caldone is false */ + if (!sc->ani.caldone) { + if ((timestamp - sc->ani.shortcal_timer) >= short_cal_interval) { + shortcal = true; + DPRINTF(sc, ATH_DBG_ANI, "shortcal @%lu\n", jiffies); + sc->ani.shortcal_timer = timestamp; + sc->ani.resetcal_timer = timestamp; + } + } else { + if ((timestamp - sc->ani.resetcal_timer) >= + ATH_RESTART_CALINTERVAL) { + sc->ani.caldone = ath9k_hw_reset_calvalid(ah); + if (sc->ani.caldone) + sc->ani.resetcal_timer = timestamp; + } + } + + /* Verify whether we must check ANI */ + if ((timestamp - sc->ani.checkani_timer) >= ATH_ANI_POLLINTERVAL) { + aniflag = true; + sc->ani.checkani_timer = timestamp; + } + + /* Skip all processing if there's nothing to do. */ + if (longcal || shortcal || aniflag) { + /* Call ANI routine if necessary */ + if (aniflag) + ath9k_hw_ani_monitor(ah, &sc->nodestats, ah->curchan); + + /* Perform calibration if necessary */ + if (longcal || shortcal) { + sc->ani.caldone = ath9k_hw_calibrate(ah, ah->curchan, + sc->rx_chainmask, longcal); + + if (longcal) + sc->ani.noise_floor = ath9k_hw_getchan_noise(ah, + ah->curchan); + + DPRINTF(sc, ATH_DBG_ANI," calibrate chan %u/%x nf: %d\n", + ah->curchan->channel, ah->curchan->channelFlags, + sc->ani.noise_floor); + } + } + + ath9k_ps_restore(sc); + +set_timer: + /* + * Set timer interval based on previous results. + * The interval must be the shortest necessary to satisfy ANI, + * short calibration and long calibration. + */ + cal_interval = ATH_LONG_CALINTERVAL; + if (sc->sc_ah->config.enable_ani) + cal_interval = min(cal_interval, (u32)ATH_ANI_POLLINTERVAL); + if (!sc->ani.caldone) + cal_interval = min(cal_interval, (u32)short_cal_interval); + + mod_timer(&sc->ani.timer, jiffies + msecs_to_jiffies(cal_interval)); +} + +static void ath_start_ani(struct ath_softc *sc) +{ + unsigned long timestamp = jiffies_to_msecs(jiffies); + + sc->ani.longcal_timer = timestamp; + sc->ani.shortcal_timer = timestamp; + sc->ani.checkani_timer = timestamp; + + mod_timer(&sc->ani.timer, + jiffies + msecs_to_jiffies(ATH_ANI_POLLINTERVAL)); +} + +/* + * Update tx/rx chainmask. For legacy association, + * hard code chainmask to 1x1, for 11n association, use + * the chainmask configuration, for bt coexistence, use + * the chainmask configuration even in legacy mode. + */ +void ath_update_chainmask(struct ath_softc *sc, int is_ht) +{ + if (is_ht || + (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_BT_COEX)) { + sc->tx_chainmask = sc->sc_ah->caps.tx_chainmask; + sc->rx_chainmask = sc->sc_ah->caps.rx_chainmask; + } else { + sc->tx_chainmask = 1; + sc->rx_chainmask = 1; + } + + DPRINTF(sc, ATH_DBG_CONFIG, "tx chmask: %d, rx chmask: %d\n", + sc->tx_chainmask, sc->rx_chainmask); +} + +static void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta) +{ + struct ath_node *an; + + an = (struct ath_node *)sta->drv_priv; + + if (sc->sc_flags & SC_OP_TXAGGR) { + ath_tx_node_init(sc, an); + an->maxampdu = 1 << (IEEE80211_HTCAP_MAXRXAMPDU_FACTOR + + sta->ht_cap.ampdu_factor); + an->mpdudensity = parse_mpdudensity(sta->ht_cap.ampdu_density); + } +} + +static void ath_node_detach(struct ath_softc *sc, struct ieee80211_sta *sta) +{ + struct ath_node *an = (struct ath_node *)sta->drv_priv; + + if (sc->sc_flags & SC_OP_TXAGGR) + ath_tx_node_cleanup(sc, an); +} + +static void ath9k_tasklet(unsigned long data) +{ + struct ath_softc *sc = (struct ath_softc *)data; + u32 status = sc->intrstatus; + + ath9k_ps_wakeup(sc); + + if (status & ATH9K_INT_FATAL) { + ath_reset(sc, false); + ath9k_ps_restore(sc); + return; + } + + if (status & (ATH9K_INT_RX | ATH9K_INT_RXEOL | ATH9K_INT_RXORN)) { + spin_lock_bh(&sc->rx.rxflushlock); + ath_rx_tasklet(sc, 0); + spin_unlock_bh(&sc->rx.rxflushlock); + } + + if (status & ATH9K_INT_TX) + ath_tx_tasklet(sc); + + if ((status & ATH9K_INT_TSFOOR) && + (sc->hw->conf.flags & IEEE80211_CONF_PS)) { + /* + * TSF sync does not look correct; remain awake to sync with + * the next Beacon. + */ + DPRINTF(sc, ATH_DBG_PS, "TSFOOR - Sync with next Beacon\n"); + sc->sc_flags |= SC_OP_WAIT_FOR_BEACON | SC_OP_BEACON_SYNC; + } + + /* re-enable hardware interrupt */ + ath9k_hw_set_interrupts(sc->sc_ah, sc->imask); + ath9k_ps_restore(sc); +} + +irqreturn_t ath_isr(int irq, void *dev) +{ +#define SCHED_INTR ( \ + ATH9K_INT_FATAL | \ + ATH9K_INT_RXORN | \ + ATH9K_INT_RXEOL | \ + ATH9K_INT_RX | \ + ATH9K_INT_TX | \ + ATH9K_INT_BMISS | \ + ATH9K_INT_CST | \ + ATH9K_INT_TSFOOR) + + struct ath_softc *sc = dev; + struct ath_hw *ah = sc->sc_ah; + enum ath9k_int status; + bool sched = false; + + /* + * The hardware is not ready/present, don't + * touch anything. Note this can happen early + * on if the IRQ is shared. + */ + if (sc->sc_flags & SC_OP_INVALID) + return IRQ_NONE; + + + /* shared irq, not for us */ + + if (!ath9k_hw_intrpend(ah)) + return IRQ_NONE; + + /* + * Figure out the reason(s) for the interrupt. Note + * that the hal returns a pseudo-ISR that may include + * bits we haven't explicitly enabled so we mask the + * value to insure we only process bits we requested. + */ + ath9k_hw_getisr(ah, &status); /* NB: clears ISR too */ + status &= sc->imask; /* discard unasked-for bits */ + + /* + * If there are no status bits set, then this interrupt was not + * for me (should have been caught above). + */ + if (!status) + return IRQ_NONE; + + /* Cache the status */ + sc->intrstatus = status; + + if (status & SCHED_INTR) + sched = true; + + /* + * If a FATAL or RXORN interrupt is received, we have to reset the + * chip immediately. + */ + if (status & (ATH9K_INT_FATAL | ATH9K_INT_RXORN)) + goto chip_reset; + + if (status & ATH9K_INT_SWBA) + tasklet_schedule(&sc->bcon_tasklet); + + if (status & ATH9K_INT_TXURN) + ath9k_hw_updatetxtriglevel(ah, true); + + if (status & ATH9K_INT_MIB) { + /* + * Disable interrupts until we service the MIB + * interrupt; otherwise it will continue to + * fire. + */ + ath9k_hw_set_interrupts(ah, 0); + /* + * Let the hal handle the event. We assume + * it will clear whatever condition caused + * the interrupt. + */ + ath9k_hw_procmibevent(ah, &sc->nodestats); + ath9k_hw_set_interrupts(ah, sc->imask); + } + + if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP)) + if (status & ATH9K_INT_TIM_TIMER) { + /* Clear RxAbort bit so that we can + * receive frames */ + ath9k_hw_setpower(ah, ATH9K_PM_AWAKE); + ath9k_hw_setrxabort(sc->sc_ah, 0); + sc->sc_flags |= SC_OP_WAIT_FOR_BEACON; + } + +chip_reset: + + ath_debug_stat_interrupt(sc, status); + + if (sched) { + /* turn off every interrupt except SWBA */ + ath9k_hw_set_interrupts(ah, (sc->imask & ATH9K_INT_SWBA)); + tasklet_schedule(&sc->intr_tq); + } + + return IRQ_HANDLED; + +#undef SCHED_INTR +} + +static u32 ath_get_extchanmode(struct ath_softc *sc, + struct ieee80211_channel *chan, + enum nl80211_channel_type channel_type) +{ + u32 chanmode = 0; + + switch (chan->band) { + case IEEE80211_BAND_2GHZ: + switch(channel_type) { + case NL80211_CHAN_NO_HT: + case NL80211_CHAN_HT20: + chanmode = CHANNEL_G_HT20; + break; + case NL80211_CHAN_HT40PLUS: + chanmode = CHANNEL_G_HT40PLUS; + break; + case NL80211_CHAN_HT40MINUS: + chanmode = CHANNEL_G_HT40MINUS; + break; + } + break; + case IEEE80211_BAND_5GHZ: + switch(channel_type) { + case NL80211_CHAN_NO_HT: + case NL80211_CHAN_HT20: + chanmode = CHANNEL_A_HT20; + break; + case NL80211_CHAN_HT40PLUS: + chanmode = CHANNEL_A_HT40PLUS; + break; + case NL80211_CHAN_HT40MINUS: + chanmode = CHANNEL_A_HT40MINUS; + break; + } + break; + default: + break; + } + + return chanmode; +} + +static int ath_setkey_tkip(struct ath_softc *sc, u16 keyix, const u8 *key, + struct ath9k_keyval *hk, const u8 *addr, + bool authenticator) +{ + const u8 *key_rxmic; + const u8 *key_txmic; + + key_txmic = key + NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY; + key_rxmic = key + NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY; + + if (addr == NULL) { + /* + * Group key installation - only two key cache entries are used + * regardless of splitmic capability since group key is only + * used either for TX or RX. + */ + if (authenticator) { + memcpy(hk->kv_mic, key_txmic, sizeof(hk->kv_mic)); + memcpy(hk->kv_txmic, key_txmic, sizeof(hk->kv_mic)); + } else { + memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic)); + memcpy(hk->kv_txmic, key_rxmic, sizeof(hk->kv_mic)); + } + return ath9k_hw_set_keycache_entry(sc->sc_ah, keyix, hk, addr); + } + if (!sc->splitmic) { + /* TX and RX keys share the same key cache entry. */ + memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic)); + memcpy(hk->kv_txmic, key_txmic, sizeof(hk->kv_txmic)); + return ath9k_hw_set_keycache_entry(sc->sc_ah, keyix, hk, addr); + } + + /* Separate key cache entries for TX and RX */ + + /* TX key goes at first index, RX key at +32. */ + memcpy(hk->kv_mic, key_txmic, sizeof(hk->kv_mic)); + if (!ath9k_hw_set_keycache_entry(sc->sc_ah, keyix, hk, NULL)) { + /* TX MIC entry failed. No need to proceed further */ + DPRINTF(sc, ATH_DBG_FATAL, + "Setting TX MIC Key Failed\n"); + return 0; + } + + memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic)); + /* XXX delete tx key on failure? */ + return ath9k_hw_set_keycache_entry(sc->sc_ah, keyix + 32, hk, addr); +} + +static int ath_reserve_key_cache_slot_tkip(struct ath_softc *sc) +{ + int i; + + for (i = IEEE80211_WEP_NKID; i < sc->keymax / 2; i++) { + if (test_bit(i, sc->keymap) || + test_bit(i + 64, sc->keymap)) + continue; /* At least one part of TKIP key allocated */ + if (sc->splitmic && + (test_bit(i + 32, sc->keymap) || + test_bit(i + 64 + 32, sc->keymap))) + continue; /* At least one part of TKIP key allocated */ + + /* Found a free slot for a TKIP key */ + return i; + } + return -1; +} + +static int ath_reserve_key_cache_slot(struct ath_softc *sc) +{ + int i; + + /* First, try to find slots that would not be available for TKIP. */ + if (sc->splitmic) { + for (i = IEEE80211_WEP_NKID; i < sc->keymax / 4; i++) { + if (!test_bit(i, sc->keymap) && + (test_bit(i + 32, sc->keymap) || + test_bit(i + 64, sc->keymap) || + test_bit(i + 64 + 32, sc->keymap))) + return i; + if (!test_bit(i + 32, sc->keymap) && + (test_bit(i, sc->keymap) || + test_bit(i + 64, sc->keymap) || + test_bit(i + 64 + 32, sc->keymap))) + return i + 32; + if (!test_bit(i + 64, sc->keymap) && + (test_bit(i , sc->keymap) || + test_bit(i + 32, sc->keymap) || + test_bit(i + 64 + 32, sc->keymap))) + return i + 64; + if (!test_bit(i + 64 + 32, sc->keymap) && + (test_bit(i, sc->keymap) || + test_bit(i + 32, sc->keymap) || + test_bit(i + 64, sc->keymap))) + return i + 64 + 32; + } + } else { + for (i = IEEE80211_WEP_NKID; i < sc->keymax / 2; i++) { + if (!test_bit(i, sc->keymap) && + test_bit(i + 64, sc->keymap)) + return i; + if (test_bit(i, sc->keymap) && + !test_bit(i + 64, sc->keymap)) + return i + 64; + } + } + + /* No partially used TKIP slots, pick any available slot */ + for (i = IEEE80211_WEP_NKID; i < sc->keymax; i++) { + /* Do not allow slots that could be needed for TKIP group keys + * to be used. This limitation could be removed if we know that + * TKIP will not be used. */ + if (i >= 64 && i < 64 + IEEE80211_WEP_NKID) + continue; + if (sc->splitmic) { + if (i >= 32 && i < 32 + IEEE80211_WEP_NKID) + continue; + if (i >= 64 + 32 && i < 64 + 32 + IEEE80211_WEP_NKID) + continue; + } + + if (!test_bit(i, sc->keymap)) + return i; /* Found a free slot for a key */ + } + + /* No free slot found */ + return -1; +} + +static int ath_key_config(struct ath_softc *sc, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + struct ieee80211_key_conf *key) +{ + struct ath9k_keyval hk; + const u8 *mac = NULL; + int ret = 0; + int idx; + + memset(&hk, 0, sizeof(hk)); + + switch (key->alg) { + case ALG_WEP: + hk.kv_type = ATH9K_CIPHER_WEP; + break; + case ALG_TKIP: + hk.kv_type = ATH9K_CIPHER_TKIP; + break; + case ALG_CCMP: + hk.kv_type = ATH9K_CIPHER_AES_CCM; + break; + default: + return -EOPNOTSUPP; + } + + hk.kv_len = key->keylen; + memcpy(hk.kv_val, key->key, key->keylen); + + if (!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) { + /* For now, use the default keys for broadcast keys. This may + * need to change with virtual interfaces. */ + idx = key->keyidx; + } else if (key->keyidx) { + if (WARN_ON(!sta)) + return -EOPNOTSUPP; + mac = sta->addr; + + if (vif->type != NL80211_IFTYPE_AP) { + /* Only keyidx 0 should be used with unicast key, but + * allow this for client mode for now. */ + idx = key->keyidx; + } else + return -EIO; + } else { + if (WARN_ON(!sta)) + return -EOPNOTSUPP; + mac = sta->addr; + + if (key->alg == ALG_TKIP) + idx = ath_reserve_key_cache_slot_tkip(sc); + else + idx = ath_reserve_key_cache_slot(sc); + if (idx < 0) + return -ENOSPC; /* no free key cache entries */ + } + + if (key->alg == ALG_TKIP) + ret = ath_setkey_tkip(sc, idx, key->key, &hk, mac, + vif->type == NL80211_IFTYPE_AP); + else + ret = ath9k_hw_set_keycache_entry(sc->sc_ah, idx, &hk, mac); + + if (!ret) + return -EIO; + + set_bit(idx, sc->keymap); + if (key->alg == ALG_TKIP) { + set_bit(idx + 64, sc->keymap); + if (sc->splitmic) { + set_bit(idx + 32, sc->keymap); + set_bit(idx + 64 + 32, sc->keymap); + } + } + + return idx; +} + +static void ath_key_delete(struct ath_softc *sc, struct ieee80211_key_conf *key) +{ + ath9k_hw_keyreset(sc->sc_ah, key->hw_key_idx); + if (key->hw_key_idx < IEEE80211_WEP_NKID) + return; + + clear_bit(key->hw_key_idx, sc->keymap); + if (key->alg != ALG_TKIP) + return; + + clear_bit(key->hw_key_idx + 64, sc->keymap); + if (sc->splitmic) { + clear_bit(key->hw_key_idx + 32, sc->keymap); + clear_bit(key->hw_key_idx + 64 + 32, sc->keymap); + } +} + +static void setup_ht_cap(struct ath_softc *sc, + struct ieee80211_sta_ht_cap *ht_info) +{ +#define ATH9K_HT_CAP_MAXRXAMPDU_65536 0x3 /* 2 ^ 16 */ +#define ATH9K_HT_CAP_MPDUDENSITY_8 0x6 /* 8 usec */ + + ht_info->ht_supported = true; + ht_info->cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40 | + IEEE80211_HT_CAP_SM_PS | + IEEE80211_HT_CAP_SGI_40 | + IEEE80211_HT_CAP_DSSSCCK40; + + ht_info->ampdu_factor = ATH9K_HT_CAP_MAXRXAMPDU_65536; + ht_info->ampdu_density = ATH9K_HT_CAP_MPDUDENSITY_8; + + /* set up supported mcs set */ + memset(&ht_info->mcs, 0, sizeof(ht_info->mcs)); + + switch(sc->rx_chainmask) { + case 1: + ht_info->mcs.rx_mask[0] = 0xff; + break; + case 3: + case 5: + case 7: + default: + ht_info->mcs.rx_mask[0] = 0xff; + ht_info->mcs.rx_mask[1] = 0xff; + break; + } + + ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED; +} + +static void ath9k_bss_assoc_info(struct ath_softc *sc, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss_conf) +{ + struct ath_vif *avp = (void *)vif->drv_priv; + + if (bss_conf->assoc) { + DPRINTF(sc, ATH_DBG_CONFIG, "Bss Info ASSOC %d, bssid: %pM\n", + bss_conf->aid, sc->curbssid); + + /* New association, store aid */ + if (avp->av_opmode == NL80211_IFTYPE_STATION) { + sc->curaid = bss_conf->aid; + ath9k_hw_write_associd(sc); + + /* + * Request a re-configuration of Beacon related timers + * on the receipt of the first Beacon frame (i.e., + * after time sync with the AP). + */ + sc->sc_flags |= SC_OP_BEACON_SYNC; + } + + /* Configure the beacon */ + ath_beacon_config(sc, vif); + + /* Reset rssi stats */ + sc->nodestats.ns_avgbrssi = ATH_RSSI_DUMMY_MARKER; + sc->nodestats.ns_avgrssi = ATH_RSSI_DUMMY_MARKER; + sc->nodestats.ns_avgtxrssi = ATH_RSSI_DUMMY_MARKER; + sc->nodestats.ns_avgtxrate = ATH_RATE_DUMMY_MARKER; + + ath_start_ani(sc); + } else { + DPRINTF(sc, ATH_DBG_CONFIG, "Bss Info DISASSOC\n"); + sc->curaid = 0; + } +} + +/********************************/ +/* LED functions */ +/********************************/ + +static void ath_led_blink_work(struct work_struct *work) +{ + struct ath_softc *sc = container_of(work, struct ath_softc, + ath_led_blink_work.work); + + if (!(sc->sc_flags & SC_OP_LED_ASSOCIATED)) + return; + + if ((sc->led_on_duration == ATH_LED_ON_DURATION_IDLE) || + (sc->led_off_duration == ATH_LED_OFF_DURATION_IDLE)) + ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 0); + else + ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, + (sc->sc_flags & SC_OP_LED_ON) ? 1 : 0); + + queue_delayed_work(sc->hw->workqueue, &sc->ath_led_blink_work, + (sc->sc_flags & SC_OP_LED_ON) ? + msecs_to_jiffies(sc->led_off_duration) : + msecs_to_jiffies(sc->led_on_duration)); + + sc->led_on_duration = sc->led_on_cnt ? + max((ATH_LED_ON_DURATION_IDLE - sc->led_on_cnt), 25) : + ATH_LED_ON_DURATION_IDLE; + sc->led_off_duration = sc->led_off_cnt ? + max((ATH_LED_OFF_DURATION_IDLE - sc->led_off_cnt), 10) : + ATH_LED_OFF_DURATION_IDLE; + sc->led_on_cnt = sc->led_off_cnt = 0; + if (sc->sc_flags & SC_OP_LED_ON) + sc->sc_flags &= ~SC_OP_LED_ON; + else + sc->sc_flags |= SC_OP_LED_ON; +} + +static void ath_led_brightness(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct ath_led *led = container_of(led_cdev, struct ath_led, led_cdev); + struct ath_softc *sc = led->sc; + + switch (brightness) { + case LED_OFF: + if (led->led_type == ATH_LED_ASSOC || + led->led_type == ATH_LED_RADIO) { + ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, + (led->led_type == ATH_LED_RADIO)); + sc->sc_flags &= ~SC_OP_LED_ASSOCIATED; + if (led->led_type == ATH_LED_RADIO) + sc->sc_flags &= ~SC_OP_LED_ON; + } else { + sc->led_off_cnt++; + } + break; + case LED_FULL: + if (led->led_type == ATH_LED_ASSOC) { + sc->sc_flags |= SC_OP_LED_ASSOCIATED; + queue_delayed_work(sc->hw->workqueue, + &sc->ath_led_blink_work, 0); + } else if (led->led_type == ATH_LED_RADIO) { + ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 0); + sc->sc_flags |= SC_OP_LED_ON; + } else { + sc->led_on_cnt++; + } + break; + default: + break; + } +} + +static int ath_register_led(struct ath_softc *sc, struct ath_led *led, + char *trigger) +{ + int ret; + + led->sc = sc; + led->led_cdev.name = led->name; + led->led_cdev.default_trigger = trigger; + led->led_cdev.brightness_set = ath_led_brightness; + + ret = led_classdev_register(wiphy_dev(sc->hw->wiphy), &led->led_cdev); + if (ret) + DPRINTF(sc, ATH_DBG_FATAL, + "Failed to register led:%s", led->name); + else + led->registered = 1; + return ret; +} + +static void ath_unregister_led(struct ath_led *led) +{ + if (led->registered) { + led_classdev_unregister(&led->led_cdev); + led->registered = 0; + } +} + +static void ath_deinit_leds(struct ath_softc *sc) +{ + cancel_delayed_work_sync(&sc->ath_led_blink_work); + ath_unregister_led(&sc->assoc_led); + sc->sc_flags &= ~SC_OP_LED_ASSOCIATED; + ath_unregister_led(&sc->tx_led); + ath_unregister_led(&sc->rx_led); + ath_unregister_led(&sc->radio_led); + ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1); +} + +static void ath_init_leds(struct ath_softc *sc) +{ + char *trigger; + int ret; + + /* Configure gpio 1 for output */ + ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN, + AR_GPIO_OUTPUT_MUX_AS_OUTPUT); + /* LED off, active low */ + ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1); + + INIT_DELAYED_WORK(&sc->ath_led_blink_work, ath_led_blink_work); + + trigger = ieee80211_get_radio_led_name(sc->hw); + snprintf(sc->radio_led.name, sizeof(sc->radio_led.name), + "ath9k-%s::radio", wiphy_name(sc->hw->wiphy)); + ret = ath_register_led(sc, &sc->radio_led, trigger); + sc->radio_led.led_type = ATH_LED_RADIO; + if (ret) + goto fail; + + trigger = ieee80211_get_assoc_led_name(sc->hw); + snprintf(sc->assoc_led.name, sizeof(sc->assoc_led.name), + "ath9k-%s::assoc", wiphy_name(sc->hw->wiphy)); + ret = ath_register_led(sc, &sc->assoc_led, trigger); + sc->assoc_led.led_type = ATH_LED_ASSOC; + if (ret) + goto fail; + + trigger = ieee80211_get_tx_led_name(sc->hw); + snprintf(sc->tx_led.name, sizeof(sc->tx_led.name), + "ath9k-%s::tx", wiphy_name(sc->hw->wiphy)); + ret = ath_register_led(sc, &sc->tx_led, trigger); + sc->tx_led.led_type = ATH_LED_TX; + if (ret) + goto fail; + + trigger = ieee80211_get_rx_led_name(sc->hw); + snprintf(sc->rx_led.name, sizeof(sc->rx_led.name), + "ath9k-%s::rx", wiphy_name(sc->hw->wiphy)); + ret = ath_register_led(sc, &sc->rx_led, trigger); + sc->rx_led.led_type = ATH_LED_RX; + if (ret) + goto fail; + + return; + +fail: + ath_deinit_leds(sc); +} + +void ath_radio_enable(struct ath_softc *sc) +{ + struct ath_hw *ah = sc->sc_ah; + struct ieee80211_channel *channel = sc->hw->conf.channel; + int r; + + ath9k_ps_wakeup(sc); + ath9k_hw_configpcipowersave(ah, 0); + + spin_lock_bh(&sc->sc_resetlock); + r = ath9k_hw_reset(ah, ah->curchan, false); + if (r) { + DPRINTF(sc, ATH_DBG_FATAL, + "Unable to reset channel %u (%uMhz) ", + "reset status %d\n", + channel->center_freq, r); + } + spin_unlock_bh(&sc->sc_resetlock); + + ath_update_txpow(sc); + if (ath_startrecv(sc) != 0) { + DPRINTF(sc, ATH_DBG_FATAL, + "Unable to restart recv logic\n"); + return; + } + + if (sc->sc_flags & SC_OP_BEACONS) + ath_beacon_config(sc, NULL); /* restart beacons */ + + /* Re-Enable interrupts */ + ath9k_hw_set_interrupts(ah, sc->imask); + + /* Enable LED */ + ath9k_hw_cfg_output(ah, ATH_LED_PIN, + AR_GPIO_OUTPUT_MUX_AS_OUTPUT); + ath9k_hw_set_gpio(ah, ATH_LED_PIN, 0); + + ieee80211_wake_queues(sc->hw); + ath9k_ps_restore(sc); +} + +void ath_radio_disable(struct ath_softc *sc) +{ + struct ath_hw *ah = sc->sc_ah; + struct ieee80211_channel *channel = sc->hw->conf.channel; + int r; + + ath9k_ps_wakeup(sc); + ieee80211_stop_queues(sc->hw); + + /* Disable LED */ + ath9k_hw_set_gpio(ah, ATH_LED_PIN, 1); + ath9k_hw_cfg_gpio_input(ah, ATH_LED_PIN); + + /* Disable interrupts */ + ath9k_hw_set_interrupts(ah, 0); + + ath_drain_all_txq(sc, false); /* clear pending tx frames */ + ath_stoprecv(sc); /* turn off frame recv */ + ath_flushrecv(sc); /* flush recv queue */ + + spin_lock_bh(&sc->sc_resetlock); + r = ath9k_hw_reset(ah, ah->curchan, false); + if (r) { + DPRINTF(sc, ATH_DBG_FATAL, + "Unable to reset channel %u (%uMhz) " + "reset status %d\n", + channel->center_freq, r); + } + spin_unlock_bh(&sc->sc_resetlock); + + ath9k_hw_phy_disable(ah); + ath9k_hw_configpcipowersave(ah, 1); + ath9k_hw_setpower(ah, ATH9K_PM_FULL_SLEEP); + ath9k_ps_restore(sc); +} + +#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) + +/*******************/ +/* Rfkill */ +/*******************/ + +static bool ath_is_rfkill_set(struct ath_softc *sc) +{ + struct ath_hw *ah = sc->sc_ah; + + return ath9k_hw_gpio_get(ah, ah->rfkill_gpio) == + ah->rfkill_polarity; +} + +/* s/w rfkill handlers */ +static int ath_rfkill_set_block(void *data, bool blocked) +{ + struct ath_softc *sc = data; + + if (blocked) + ath_radio_disable(sc); + else + ath_radio_enable(sc); + + return 0; +} + +static void ath_rfkill_poll_state(struct rfkill *rfkill, void *data) +{ + struct ath_softc *sc = data; + bool blocked = !!ath_is_rfkill_set(sc); + + if (rfkill_set_hw_state(rfkill, blocked)) + ath_radio_disable(sc); + else + ath_radio_enable(sc); +} + +/* Init s/w rfkill */ +static int ath_init_sw_rfkill(struct ath_softc *sc) +{ + sc->rf_kill.ops.set_block = ath_rfkill_set_block; + if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT) + sc->rf_kill.ops.poll = ath_rfkill_poll_state; + + snprintf(sc->rf_kill.rfkill_name, sizeof(sc->rf_kill.rfkill_name), + "ath9k-%s::rfkill", wiphy_name(sc->hw->wiphy)); + + sc->rf_kill.rfkill = rfkill_alloc(sc->rf_kill.rfkill_name, + wiphy_dev(sc->hw->wiphy), + RFKILL_TYPE_WLAN, + &sc->rf_kill.ops, sc); + if (!sc->rf_kill.rfkill) { + DPRINTF(sc, ATH_DBG_FATAL, "Failed to allocate rfkill\n"); + return -ENOMEM; + } + + return 0; +} + +/* Deinitialize rfkill */ +static void ath_deinit_rfkill(struct ath_softc *sc) +{ + if (sc->sc_flags & SC_OP_RFKILL_REGISTERED) { + rfkill_unregister(sc->rf_kill.rfkill); + rfkill_destroy(sc->rf_kill.rfkill); + sc->sc_flags &= ~SC_OP_RFKILL_REGISTERED; + } +} + +static int ath_start_rfkill_poll(struct ath_softc *sc) +{ + if (!(sc->sc_flags & SC_OP_RFKILL_REGISTERED)) { + if (rfkill_register(sc->rf_kill.rfkill)) { + DPRINTF(sc, ATH_DBG_FATAL, + "Unable to register rfkill\n"); + rfkill_destroy(sc->rf_kill.rfkill); + + /* Deinitialize the device */ + ath_cleanup(sc); + return -EIO; + } else { + sc->sc_flags |= SC_OP_RFKILL_REGISTERED; + } + } + + return 0; +} +#endif /* CONFIG_RFKILL */ + +void ath_cleanup(struct ath_softc *sc) +{ + ath_detach(sc); + free_irq(sc->irq, sc); + ath_bus_cleanup(sc); + kfree(sc->sec_wiphy); + ieee80211_free_hw(sc->hw); +} + +void ath_detach(struct ath_softc *sc) +{ + struct ieee80211_hw *hw = sc->hw; + int i = 0; + + ath9k_ps_wakeup(sc); + + DPRINTF(sc, ATH_DBG_CONFIG, "Detach ATH hw\n"); + +#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) + ath_deinit_rfkill(sc); +#endif + ath_deinit_leds(sc); + cancel_work_sync(&sc->chan_work); + cancel_delayed_work_sync(&sc->wiphy_work); + + for (i = 0; i < sc->num_sec_wiphy; i++) { + struct ath_wiphy *aphy = sc->sec_wiphy[i]; + if (aphy == NULL) + continue; + sc->sec_wiphy[i] = NULL; + ieee80211_unregister_hw(aphy->hw); + ieee80211_free_hw(aphy->hw); + } + ieee80211_unregister_hw(hw); + ath_rx_cleanup(sc); + ath_tx_cleanup(sc); + + tasklet_kill(&sc->intr_tq); + tasklet_kill(&sc->bcon_tasklet); + + if (!(sc->sc_flags & SC_OP_INVALID)) + ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE); + + /* cleanup tx queues */ + for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) + if (ATH_TXQ_SETUP(sc, i)) + ath_tx_cleanupq(sc, &sc->tx.txq[i]); + + ath9k_hw_detach(sc->sc_ah); + ath9k_exit_debug(sc); + ath9k_ps_restore(sc); +} + +static int ath9k_reg_notifier(struct wiphy *wiphy, + struct regulatory_request *request) +{ + struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy); + struct ath_wiphy *aphy = hw->priv; + struct ath_softc *sc = aphy->sc; + struct ath_regulatory *reg = &sc->sc_ah->regulatory; + + return ath_reg_notifier_apply(wiphy, request, reg); +} + +static int ath_init(u16 devid, struct ath_softc *sc) +{ + struct ath_hw *ah = NULL; + int status; + int error = 0, i; + int csz = 0; + + /* XXX: hardware will not be ready until ath_open() being called */ + sc->sc_flags |= SC_OP_INVALID; + + if (ath9k_init_debug(sc) < 0) + printk(KERN_ERR "Unable to create debugfs files\n"); + + spin_lock_init(&sc->wiphy_lock); + spin_lock_init(&sc->sc_resetlock); + spin_lock_init(&sc->sc_serial_rw); + mutex_init(&sc->mutex); + tasklet_init(&sc->intr_tq, ath9k_tasklet, (unsigned long)sc); + tasklet_init(&sc->bcon_tasklet, ath_beacon_tasklet, + (unsigned long)sc); + + /* + * Cache line size is used to size and align various + * structures used to communicate with the hardware. + */ + ath_read_cachesize(sc, &csz); + /* XXX assert csz is non-zero */ + sc->cachelsz = csz << 2; /* convert to bytes */ + + ah = ath9k_hw_attach(devid, sc, &status); + if (ah == NULL) { + DPRINTF(sc, ATH_DBG_FATAL, + "Unable to attach hardware; HAL status %d\n", status); + error = -ENXIO; + goto bad; + } + sc->sc_ah = ah; + + /* Get the hardware key cache size. */ + sc->keymax = ah->caps.keycache_size; + if (sc->keymax > ATH_KEYMAX) { + DPRINTF(sc, ATH_DBG_ANY, + "Warning, using only %u entries in %u key cache\n", + ATH_KEYMAX, sc->keymax); + sc->keymax = ATH_KEYMAX; + } + + /* + * Reset the key cache since some parts do not + * reset the contents on initial power up. + */ + for (i = 0; i < sc->keymax; i++) + ath9k_hw_keyreset(ah, (u16) i); + + if (error) + goto bad; + + /* default to MONITOR mode */ + sc->sc_ah->opmode = NL80211_IFTYPE_MONITOR; + + /* Setup rate tables */ + + ath_rate_attach(sc); + ath_setup_rates(sc, IEEE80211_BAND_2GHZ); + ath_setup_rates(sc, IEEE80211_BAND_5GHZ); + + /* + * Allocate hardware transmit queues: one queue for + * beacon frames and one data queue for each QoS + * priority. Note that the hal handles reseting + * these queues at the needed time. + */ + sc->beacon.beaconq = ath_beaconq_setup(ah); + if (sc->beacon.beaconq == -1) { + DPRINTF(sc, ATH_DBG_FATAL, + "Unable to setup a beacon xmit queue\n"); + error = -EIO; + goto bad2; + } + sc->beacon.cabq = ath_txq_setup(sc, ATH9K_TX_QUEUE_CAB, 0); + if (sc->beacon.cabq == NULL) { + DPRINTF(sc, ATH_DBG_FATAL, + "Unable to setup CAB xmit queue\n"); + error = -EIO; + goto bad2; + } + + sc->config.cabqReadytime = ATH_CABQ_READY_TIME; + ath_cabq_update(sc); + + for (i = 0; i < ARRAY_SIZE(sc->tx.hwq_map); i++) + sc->tx.hwq_map[i] = -1; + + /* Setup data queues */ + /* NB: ensure BK queue is the lowest priority h/w queue */ + if (!ath_tx_setup(sc, ATH9K_WME_AC_BK)) { + DPRINTF(sc, ATH_DBG_FATAL, + "Unable to setup xmit queue for BK traffic\n"); + error = -EIO; + goto bad2; + } + + if (!ath_tx_setup(sc, ATH9K_WME_AC_BE)) { + DPRINTF(sc, ATH_DBG_FATAL, + "Unable to setup xmit queue for BE traffic\n"); + error = -EIO; + goto bad2; + } + if (!ath_tx_setup(sc, ATH9K_WME_AC_VI)) { + DPRINTF(sc, ATH_DBG_FATAL, + "Unable to setup xmit queue for VI traffic\n"); + error = -EIO; + goto bad2; + } + if (!ath_tx_setup(sc, ATH9K_WME_AC_VO)) { + DPRINTF(sc, ATH_DBG_FATAL, + "Unable to setup xmit queue for VO traffic\n"); + error = -EIO; + goto bad2; + } + + /* Initializes the noise floor to a reasonable default value. + * Later on this will be updated during ANI processing. */ + + sc->ani.noise_floor = ATH_DEFAULT_NOISE_FLOOR; + setup_timer(&sc->ani.timer, ath_ani_calibrate, (unsigned long)sc); + + if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER, + ATH9K_CIPHER_TKIP, NULL)) { + /* + * Whether we should enable h/w TKIP MIC. + * XXX: if we don't support WME TKIP MIC, then we wouldn't + * report WMM capable, so it's always safe to turn on + * TKIP MIC in this case. + */ + ath9k_hw_setcapability(sc->sc_ah, ATH9K_CAP_TKIP_MIC, + 0, 1, NULL); + } + + /* + * Check whether the separate key cache entries + * are required to handle both tx+rx MIC keys. + * With split mic keys the number of stations is limited + * to 27 otherwise 59. + */ + if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER, + ATH9K_CIPHER_TKIP, NULL) + && ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER, + ATH9K_CIPHER_MIC, NULL) + && ath9k_hw_getcapability(ah, ATH9K_CAP_TKIP_SPLIT, + 0, NULL)) + sc->splitmic = 1; + + /* turn on mcast key search if possible */ + if (!ath9k_hw_getcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 0, NULL)) + (void)ath9k_hw_setcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 1, + 1, NULL); + + sc->config.txpowlimit = ATH_TXPOWER_MAX; + + /* 11n Capabilities */ + if (ah->caps.hw_caps & ATH9K_HW_CAP_HT) { + sc->sc_flags |= SC_OP_TXAGGR; + sc->sc_flags |= SC_OP_RXAGGR; + } + + sc->tx_chainmask = ah->caps.tx_chainmask; + sc->rx_chainmask = ah->caps.rx_chainmask; + + ath9k_hw_setcapability(ah, ATH9K_CAP_DIVERSITY, 1, true, NULL); + sc->rx.defant = ath9k_hw_getdefantenna(ah); + + if (ah->caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK) + memcpy(sc->bssidmask, ath_bcast_mac, ETH_ALEN); + + sc->beacon.slottime = ATH9K_SLOT_TIME_9; /* default to short slot time */ + + /* initialize beacon slots */ + for (i = 0; i < ARRAY_SIZE(sc->beacon.bslot); i++) { + sc->beacon.bslot[i] = NULL; + sc->beacon.bslot_aphy[i] = NULL; + } + + /* setup channels and rates */ + + sc->sbands[IEEE80211_BAND_2GHZ].channels = ath9k_2ghz_chantable; + sc->sbands[IEEE80211_BAND_2GHZ].bitrates = + sc->rates[IEEE80211_BAND_2GHZ]; + sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ; + sc->sbands[IEEE80211_BAND_2GHZ].n_channels = + ARRAY_SIZE(ath9k_2ghz_chantable); + + if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes)) { + sc->sbands[IEEE80211_BAND_5GHZ].channels = ath9k_5ghz_chantable; + sc->sbands[IEEE80211_BAND_5GHZ].bitrates = + sc->rates[IEEE80211_BAND_5GHZ]; + sc->sbands[IEEE80211_BAND_5GHZ].band = IEEE80211_BAND_5GHZ; + sc->sbands[IEEE80211_BAND_5GHZ].n_channels = + ARRAY_SIZE(ath9k_5ghz_chantable); + } + + if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_BT_COEX) + ath9k_hw_btcoex_enable(sc->sc_ah); + + return 0; +bad2: + /* cleanup tx queues */ + for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) + if (ATH_TXQ_SETUP(sc, i)) + ath_tx_cleanupq(sc, &sc->tx.txq[i]); +bad: + if (ah) + ath9k_hw_detach(ah); + ath9k_exit_debug(sc); + + return error; +} + +void ath_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw) +{ + hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | + IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | + IEEE80211_HW_SIGNAL_DBM | + IEEE80211_HW_AMPDU_AGGREGATION | + IEEE80211_HW_SUPPORTS_PS | + IEEE80211_HW_PS_NULLFUNC_STACK | + IEEE80211_HW_SPECTRUM_MGMT; + + if (AR_SREV_9160_10_OR_LATER(sc->sc_ah) || modparam_nohwcrypt) + hw->flags |= IEEE80211_HW_MFP_CAPABLE; + + hw->wiphy->interface_modes = + BIT(NL80211_IFTYPE_AP) | + BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_ADHOC) | + BIT(NL80211_IFTYPE_MESH_POINT); + + hw->queues = 4; + hw->max_rates = 4; + hw->channel_change_time = 5000; + hw->max_listen_interval = 10; + hw->max_rate_tries = ATH_11N_TXMAXTRY; + hw->sta_data_size = sizeof(struct ath_node); + hw->vif_data_size = sizeof(struct ath_vif); + + hw->rate_control_algorithm = "ath9k_rate_control"; + + hw->wiphy->bands[IEEE80211_BAND_2GHZ] = + &sc->sbands[IEEE80211_BAND_2GHZ]; + if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes)) + hw->wiphy->bands[IEEE80211_BAND_5GHZ] = + &sc->sbands[IEEE80211_BAND_5GHZ]; +} + +int ath_attach(u16 devid, struct ath_softc *sc) +{ + struct ieee80211_hw *hw = sc->hw; + int error = 0, i; + struct ath_regulatory *reg; + + DPRINTF(sc, ATH_DBG_CONFIG, "Attach ATH hw\n"); + + error = ath_init(devid, sc); + if (error != 0) + return error; + + /* get mac address from hardware and set in mac80211 */ + + SET_IEEE80211_PERM_ADDR(hw, sc->sc_ah->macaddr); + + ath_set_hw_capab(sc, hw); + + error = ath_regd_init(&sc->sc_ah->regulatory, sc->hw->wiphy, + ath9k_reg_notifier); + if (error) + return error; + + reg = &sc->sc_ah->regulatory; + + if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) { + setup_ht_cap(sc, &sc->sbands[IEEE80211_BAND_2GHZ].ht_cap); + if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes)) + setup_ht_cap(sc, &sc->sbands[IEEE80211_BAND_5GHZ].ht_cap); + } + + /* initialize tx/rx engine */ + error = ath_tx_init(sc, ATH_TXBUF); + if (error != 0) + goto error_attach; + + error = ath_rx_init(sc, ATH_RXBUF); + if (error != 0) + goto error_attach; + +#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) + /* Initialize s/w rfkill */ + error = ath_init_sw_rfkill(sc); + if (error) + goto error_attach; +#endif + + INIT_WORK(&sc->chan_work, ath9k_wiphy_chan_work); + INIT_DELAYED_WORK(&sc->wiphy_work, ath9k_wiphy_work); + sc->wiphy_scheduler_int = msecs_to_jiffies(500); + + error = ieee80211_register_hw(hw); + + if (!ath_is_world_regd(reg)) { + error = regulatory_hint(hw->wiphy, reg->alpha2); + if (error) + goto error_attach; + } + + /* Initialize LED control */ + ath_init_leds(sc); + + + return 0; + +error_attach: + /* cleanup tx queues */ + for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) + if (ATH_TXQ_SETUP(sc, i)) + ath_tx_cleanupq(sc, &sc->tx.txq[i]); + + ath9k_hw_detach(sc->sc_ah); + ath9k_exit_debug(sc); + + return error; +} + +int ath_reset(struct ath_softc *sc, bool retry_tx) +{ + struct ath_hw *ah = sc->sc_ah; + struct ieee80211_hw *hw = sc->hw; + int r; + + ath9k_hw_set_interrupts(ah, 0); + ath_drain_all_txq(sc, retry_tx); + ath_stoprecv(sc); + ath_flushrecv(sc); + + spin_lock_bh(&sc->sc_resetlock); + r = ath9k_hw_reset(ah, sc->sc_ah->curchan, false); + if (r) + DPRINTF(sc, ATH_DBG_FATAL, + "Unable to reset hardware; reset status %d\n", r); + spin_unlock_bh(&sc->sc_resetlock); + + if (ath_startrecv(sc) != 0) + DPRINTF(sc, ATH_DBG_FATAL, "Unable to start recv logic\n"); + + /* + * We may be doing a reset in response to a request + * that changes the channel so update any state that + * might change as a result. + */ + ath_cache_conf_rate(sc, &hw->conf); + + ath_update_txpow(sc); + + if (sc->sc_flags & SC_OP_BEACONS) + ath_beacon_config(sc, NULL); /* restart beacons */ + + ath9k_hw_set_interrupts(ah, sc->imask); + + if (retry_tx) { + int i; + for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) { + if (ATH_TXQ_SETUP(sc, i)) { + spin_lock_bh(&sc->tx.txq[i].axq_lock); + ath_txq_schedule(sc, &sc->tx.txq[i]); + spin_unlock_bh(&sc->tx.txq[i].axq_lock); + } + } + } + + return r; +} + +/* + * This function will allocate both the DMA descriptor structure, and the + * buffers it contains. These are used to contain the descriptors used + * by the system. +*/ +int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd, + struct list_head *head, const char *name, + int nbuf, int ndesc) +{ +#define DS2PHYS(_dd, _ds) \ + ((_dd)->dd_desc_paddr + ((caddr_t)(_ds) - (caddr_t)(_dd)->dd_desc)) +#define ATH_DESC_4KB_BOUND_CHECK(_daddr) ((((_daddr) & 0xFFF) > 0xF7F) ? 1 : 0) +#define ATH_DESC_4KB_BOUND_NUM_SKIPPED(_len) ((_len) / 4096) + + struct ath_desc *ds; + struct ath_buf *bf; + int i, bsize, error; + + DPRINTF(sc, ATH_DBG_CONFIG, "%s DMA: %u buffers %u desc/buf\n", + name, nbuf, ndesc); + + INIT_LIST_HEAD(head); + /* ath_desc must be a multiple of DWORDs */ + if ((sizeof(struct ath_desc) % 4) != 0) { + DPRINTF(sc, ATH_DBG_FATAL, "ath_desc not DWORD aligned\n"); + ASSERT((sizeof(struct ath_desc) % 4) == 0); + error = -ENOMEM; + goto fail; + } + + dd->dd_desc_len = sizeof(struct ath_desc) * nbuf * ndesc; + + /* + * Need additional DMA memory because we can't use + * descriptors that cross the 4K page boundary. Assume + * one skipped descriptor per 4K page. + */ + if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_4KB_SPLITTRANS)) { + u32 ndesc_skipped = + ATH_DESC_4KB_BOUND_NUM_SKIPPED(dd->dd_desc_len); + u32 dma_len; + + while (ndesc_skipped) { + dma_len = ndesc_skipped * sizeof(struct ath_desc); + dd->dd_desc_len += dma_len; + + ndesc_skipped = ATH_DESC_4KB_BOUND_NUM_SKIPPED(dma_len); + }; + } + + /* allocate descriptors */ + dd->dd_desc = dma_alloc_coherent(sc->dev, dd->dd_desc_len, + &dd->dd_desc_paddr, GFP_KERNEL); + if (dd->dd_desc == NULL) { + error = -ENOMEM; + goto fail; + } + ds = dd->dd_desc; + DPRINTF(sc, ATH_DBG_CONFIG, "%s DMA map: %p (%u) -> %llx (%u)\n", + name, ds, (u32) dd->dd_desc_len, + ito64(dd->dd_desc_paddr), /*XXX*/(u32) dd->dd_desc_len); + + /* allocate buffers */ + bsize = sizeof(struct ath_buf) * nbuf; + bf = kzalloc(bsize, GFP_KERNEL); + if (bf == NULL) { + error = -ENOMEM; + goto fail2; + } + dd->dd_bufptr = bf; + + for (i = 0; i < nbuf; i++, bf++, ds += ndesc) { + bf->bf_desc = ds; + bf->bf_daddr = DS2PHYS(dd, ds); + + if (!(sc->sc_ah->caps.hw_caps & + ATH9K_HW_CAP_4KB_SPLITTRANS)) { + /* + * Skip descriptor addresses which can cause 4KB + * boundary crossing (addr + length) with a 32 dword + * descriptor fetch. + */ + while (ATH_DESC_4KB_BOUND_CHECK(bf->bf_daddr)) { + ASSERT((caddr_t) bf->bf_desc < + ((caddr_t) dd->dd_desc + + dd->dd_desc_len)); + + ds += ndesc; + bf->bf_desc = ds; + bf->bf_daddr = DS2PHYS(dd, ds); + } + } + list_add_tail(&bf->list, head); + } + return 0; +fail2: + dma_free_coherent(sc->dev, dd->dd_desc_len, dd->dd_desc, + dd->dd_desc_paddr); +fail: + memset(dd, 0, sizeof(*dd)); + return error; +#undef ATH_DESC_4KB_BOUND_CHECK +#undef ATH_DESC_4KB_BOUND_NUM_SKIPPED +#undef DS2PHYS +} + +void ath_descdma_cleanup(struct ath_softc *sc, + struct ath_descdma *dd, + struct list_head *head) +{ + dma_free_coherent(sc->dev, dd->dd_desc_len, dd->dd_desc, + dd->dd_desc_paddr); + + INIT_LIST_HEAD(head); + kfree(dd->dd_bufptr); + memset(dd, 0, sizeof(*dd)); +} + +int ath_get_hal_qnum(u16 queue, struct ath_softc *sc) +{ + int qnum; + + switch (queue) { + case 0: + qnum = sc->tx.hwq_map[ATH9K_WME_AC_VO]; + break; + case 1: + qnum = sc->tx.hwq_map[ATH9K_WME_AC_VI]; + break; + case 2: + qnum = sc->tx.hwq_map[ATH9K_WME_AC_BE]; + break; + case 3: + qnum = sc->tx.hwq_map[ATH9K_WME_AC_BK]; + break; + default: + qnum = sc->tx.hwq_map[ATH9K_WME_AC_BE]; + break; + } + + return qnum; +} + +int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc) +{ + int qnum; + + switch (queue) { + case ATH9K_WME_AC_VO: + qnum = 0; + break; + case ATH9K_WME_AC_VI: + qnum = 1; + break; + case ATH9K_WME_AC_BE: + qnum = 2; + break; + case ATH9K_WME_AC_BK: + qnum = 3; + break; + default: + qnum = -1; + break; + } + + return qnum; +} + +/* XXX: Remove me once we don't depend on ath9k_channel for all + * this redundant data */ +void ath9k_update_ichannel(struct ath_softc *sc, struct ieee80211_hw *hw, + struct ath9k_channel *ichan) +{ + struct ieee80211_channel *chan = hw->conf.channel; + struct ieee80211_conf *conf = &hw->conf; + + ichan->channel = chan->center_freq; + ichan->chan = chan; + + if (chan->band == IEEE80211_BAND_2GHZ) { + ichan->chanmode = CHANNEL_G; + ichan->channelFlags = CHANNEL_2GHZ | CHANNEL_OFDM; + } else { + ichan->chanmode = CHANNEL_A; + ichan->channelFlags = CHANNEL_5GHZ | CHANNEL_OFDM; + } + + sc->tx_chan_width = ATH9K_HT_MACMODE_20; + + if (conf_is_ht(conf)) { + if (conf_is_ht40(conf)) + sc->tx_chan_width = ATH9K_HT_MACMODE_2040; + + ichan->chanmode = ath_get_extchanmode(sc, chan, + conf->channel_type); + } +} + +/**********************/ +/* mac80211 callbacks */ +/**********************/ + +static int ath9k_start(struct ieee80211_hw *hw) +{ + struct ath_wiphy *aphy = hw->priv; + struct ath_softc *sc = aphy->sc; + struct ieee80211_channel *curchan = hw->conf.channel; + struct ath9k_channel *init_channel; + int r, pos; + + DPRINTF(sc, ATH_DBG_CONFIG, "Starting driver with " + "initial channel: %d MHz\n", curchan->center_freq); + + mutex_lock(&sc->mutex); + + if (ath9k_wiphy_started(sc)) { + if (sc->chan_idx == curchan->hw_value) { + /* + * Already on the operational channel, the new wiphy + * can be marked active. + */ + aphy->state = ATH_WIPHY_ACTIVE; + ieee80211_wake_queues(hw); + } else { + /* + * Another wiphy is on another channel, start the new + * wiphy in paused state. + */ + aphy->state = ATH_WIPHY_PAUSED; + ieee80211_stop_queues(hw); + } + mutex_unlock(&sc->mutex); + return 0; + } + aphy->state = ATH_WIPHY_ACTIVE; + + /* setup initial channel */ + + pos = curchan->hw_value; + + sc->chan_idx = pos; + init_channel = &sc->sc_ah->channels[pos]; + ath9k_update_ichannel(sc, hw, init_channel); + + /* Reset SERDES registers */ + ath9k_hw_configpcipowersave(sc->sc_ah, 0); + + /* + * The basic interface to setting the hardware in a good + * state is ``reset''. On return the hardware is known to + * be powered up and with interrupts disabled. This must + * be followed by initialization of the appropriate bits + * and then setup of the interrupt mask. + */ + spin_lock_bh(&sc->sc_resetlock); + r = ath9k_hw_reset(sc->sc_ah, init_channel, false); + if (r) { + DPRINTF(sc, ATH_DBG_FATAL, + "Unable to reset hardware; reset status %d " + "(freq %u MHz)\n", r, + curchan->center_freq); + spin_unlock_bh(&sc->sc_resetlock); + goto mutex_unlock; + } + spin_unlock_bh(&sc->sc_resetlock); + + /* + * This is needed only to setup initial state + * but it's best done after a reset. + */ + ath_update_txpow(sc); + + /* + * Setup the hardware after reset: + * The receive engine is set going. + * Frame transmit is handled entirely + * in the frame output path; there's nothing to do + * here except setup the interrupt mask. + */ + if (ath_startrecv(sc) != 0) { + DPRINTF(sc, ATH_DBG_FATAL, "Unable to start recv logic\n"); + r = -EIO; + goto mutex_unlock; + } + + /* Setup our intr mask. */ + sc->imask = ATH9K_INT_RX | ATH9K_INT_TX + | ATH9K_INT_RXEOL | ATH9K_INT_RXORN + | ATH9K_INT_FATAL | ATH9K_INT_GLOBAL; + + if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_GTT) + sc->imask |= ATH9K_INT_GTT; + + if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) + sc->imask |= ATH9K_INT_CST; + + ath_cache_conf_rate(sc, &hw->conf); + + sc->sc_flags &= ~SC_OP_INVALID; + + /* Disable BMISS interrupt when we're not associated */ + sc->imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS); + ath9k_hw_set_interrupts(sc->sc_ah, sc->imask); + + ieee80211_wake_queues(hw); + +#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) + r = ath_start_rfkill_poll(sc); +#endif + +mutex_unlock: + mutex_unlock(&sc->mutex); + + return r; +} + +static int ath9k_tx(struct ieee80211_hw *hw, + struct sk_buff *skb) +{ + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct ath_wiphy *aphy = hw->priv; + struct ath_softc *sc = aphy->sc; + struct ath_tx_control txctl; + int hdrlen, padsize; + + if (aphy->state != ATH_WIPHY_ACTIVE && aphy->state != ATH_WIPHY_SCAN) { + printk(KERN_DEBUG "ath9k: %s: TX in unexpected wiphy state " + "%d\n", wiphy_name(hw->wiphy), aphy->state); + goto exit; + } + + if (sc->hw->conf.flags & IEEE80211_CONF_PS) { + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + /* + * mac80211 does not set PM field for normal data frames, so we + * need to update that based on the current PS mode. + */ + if (ieee80211_is_data(hdr->frame_control) && + !ieee80211_is_nullfunc(hdr->frame_control) && + !ieee80211_has_pm(hdr->frame_control)) { + DPRINTF(sc, ATH_DBG_PS, "Add PM=1 for a TX frame " + "while in PS mode\n"); + hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM); + } + } + + if (unlikely(sc->sc_ah->power_mode != ATH9K_PM_AWAKE)) { + /* + * We are using PS-Poll and mac80211 can request TX while in + * power save mode. Need to wake up hardware for the TX to be + * completed and if needed, also for RX of buffered frames. + */ + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + ath9k_ps_wakeup(sc); + ath9k_hw_setrxabort(sc->sc_ah, 0); + if (ieee80211_is_pspoll(hdr->frame_control)) { + DPRINTF(sc, ATH_DBG_PS, "Sending PS-Poll to pick a " + "buffered frame\n"); + sc->sc_flags |= SC_OP_WAIT_FOR_PSPOLL_DATA; + } else { + DPRINTF(sc, ATH_DBG_PS, "Wake up to complete TX\n"); + sc->sc_flags |= SC_OP_WAIT_FOR_TX_ACK; + } + /* + * The actual restore operation will happen only after + * the sc_flags bit is cleared. We are just dropping + * the ps_usecount here. + */ + ath9k_ps_restore(sc); + } + + memset(&txctl, 0, sizeof(struct ath_tx_control)); + + /* + * As a temporary workaround, assign seq# here; this will likely need + * to be cleaned up to work better with Beacon transmission and virtual + * BSSes. + */ + if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) + sc->tx.seq_no += 0x10; + hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); + hdr->seq_ctrl |= cpu_to_le16(sc->tx.seq_no); + } + + /* Add the padding after the header if this is not already done */ + hdrlen = ieee80211_get_hdrlen_from_skb(skb); + if (hdrlen & 3) { + padsize = hdrlen % 4; + if (skb_headroom(skb) < padsize) + return -1; + skb_push(skb, padsize); + memmove(skb->data, skb->data + padsize, hdrlen); + } + + /* Check if a tx queue is available */ + + txctl.txq = ath_test_get_txq(sc, skb); + if (!txctl.txq) + goto exit; + + DPRINTF(sc, ATH_DBG_XMIT, "transmitting packet, skb: %p\n", skb); + + if (ath_tx_start(hw, skb, &txctl) != 0) { + DPRINTF(sc, ATH_DBG_XMIT, "TX failed\n"); + goto exit; + } + + return 0; +exit: + dev_kfree_skb_any(skb); + return 0; +} + +static void ath9k_stop(struct ieee80211_hw *hw) +{ + struct ath_wiphy *aphy = hw->priv; + struct ath_softc *sc = aphy->sc; + + aphy->state = ATH_WIPHY_INACTIVE; + + if (sc->sc_flags & SC_OP_INVALID) { + DPRINTF(sc, ATH_DBG_ANY, "Device not present\n"); + return; + } + + mutex_lock(&sc->mutex); + + ieee80211_stop_queues(hw); + + if (ath9k_wiphy_started(sc)) { + mutex_unlock(&sc->mutex); + return; /* another wiphy still in use */ + } + + /* make sure h/w will not generate any interrupt + * before setting the invalid flag. */ + ath9k_hw_set_interrupts(sc->sc_ah, 0); + + if (!(sc->sc_flags & SC_OP_INVALID)) { + ath_drain_all_txq(sc, false); + ath_stoprecv(sc); + ath9k_hw_phy_disable(sc->sc_ah); + } else + sc->rx.rxlink = NULL; + + rfkill_pause_polling(sc->rf_kill.rfkill); + + /* disable HAL and put h/w to sleep */ + ath9k_hw_disable(sc->sc_ah); + ath9k_hw_configpcipowersave(sc->sc_ah, 1); + + sc->sc_flags |= SC_OP_INVALID; + + mutex_unlock(&sc->mutex); + + DPRINTF(sc, ATH_DBG_CONFIG, "Driver halt\n"); +} + +static int ath9k_add_interface(struct ieee80211_hw *hw, + struct ieee80211_if_init_conf *conf) +{ + struct ath_wiphy *aphy = hw->priv; + struct ath_softc *sc = aphy->sc; + struct ath_vif *avp = (void *)conf->vif->drv_priv; + enum nl80211_iftype ic_opmode = NL80211_IFTYPE_UNSPECIFIED; + int ret = 0; + + mutex_lock(&sc->mutex); + + if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK) && + sc->nvifs > 0) { + ret = -ENOBUFS; + goto out; + } + + switch (conf->type) { + case NL80211_IFTYPE_STATION: + ic_opmode = NL80211_IFTYPE_STATION; + break; + case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_MESH_POINT: + if (sc->nbcnvifs >= ATH_BCBUF) { + ret = -ENOBUFS; + goto out; + } + ic_opmode = conf->type; + break; + default: + DPRINTF(sc, ATH_DBG_FATAL, + "Interface type %d not yet supported\n", conf->type); + ret = -EOPNOTSUPP; + goto out; + } + + DPRINTF(sc, ATH_DBG_CONFIG, "Attach a VIF of type: %d\n", ic_opmode); + + /* Set the VIF opmode */ + avp->av_opmode = ic_opmode; + avp->av_bslot = -1; + + sc->nvifs++; + + if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK) + ath9k_set_bssid_mask(hw); + + if (sc->nvifs > 1) + goto out; /* skip global settings for secondary vif */ + + if (ic_opmode == NL80211_IFTYPE_AP) { + ath9k_hw_set_tsfadjust(sc->sc_ah, 1); + sc->sc_flags |= SC_OP_TSF_RESET; + } + + /* Set the device opmode */ + sc->sc_ah->opmode = ic_opmode; + + /* + * Enable MIB interrupts when there are hardware phy counters. + * Note we only do this (at the moment) for station mode. + */ + if ((conf->type == NL80211_IFTYPE_STATION) || + (conf->type == NL80211_IFTYPE_ADHOC) || + (conf->type == NL80211_IFTYPE_MESH_POINT)) { + if (ath9k_hw_phycounters(sc->sc_ah)) + sc->imask |= ATH9K_INT_MIB; + sc->imask |= ATH9K_INT_TSFOOR; + } + + ath9k_hw_set_interrupts(sc->sc_ah, sc->imask); + + if (conf->type == NL80211_IFTYPE_AP) + ath_start_ani(sc); + +out: + mutex_unlock(&sc->mutex); + return ret; +} + +static void ath9k_remove_interface(struct ieee80211_hw *hw, + struct ieee80211_if_init_conf *conf) +{ + struct ath_wiphy *aphy = hw->priv; + struct ath_softc *sc = aphy->sc; + struct ath_vif *avp = (void *)conf->vif->drv_priv; + int i; + + DPRINTF(sc, ATH_DBG_CONFIG, "Detach Interface\n"); + + mutex_lock(&sc->mutex); + + /* Stop ANI */ + del_timer_sync(&sc->ani.timer); + + /* Reclaim beacon resources */ + if ((sc->sc_ah->opmode == NL80211_IFTYPE_AP) || + (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC) || + (sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT)) { + ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq); + ath_beacon_return(sc, avp); + } + + sc->sc_flags &= ~SC_OP_BEACONS; + + for (i = 0; i < ARRAY_SIZE(sc->beacon.bslot); i++) { + if (sc->beacon.bslot[i] == conf->vif) { + printk(KERN_DEBUG "%s: vif had allocated beacon " + "slot\n", __func__); + sc->beacon.bslot[i] = NULL; + sc->beacon.bslot_aphy[i] = NULL; + } + } + + sc->nvifs--; + + mutex_unlock(&sc->mutex); +} + +static int ath9k_config(struct ieee80211_hw *hw, u32 changed) +{ + struct ath_wiphy *aphy = hw->priv; + struct ath_softc *sc = aphy->sc; + struct ieee80211_conf *conf = &hw->conf; + struct ath_hw *ah = sc->sc_ah; + + mutex_lock(&sc->mutex); + + if (changed & IEEE80211_CONF_CHANGE_PS) { + if (conf->flags & IEEE80211_CONF_PS) { + if (!(ah->caps.hw_caps & + ATH9K_HW_CAP_AUTOSLEEP)) { + if ((sc->imask & ATH9K_INT_TIM_TIMER) == 0) { + sc->imask |= ATH9K_INT_TIM_TIMER; + ath9k_hw_set_interrupts(sc->sc_ah, + sc->imask); + } + ath9k_hw_setrxabort(sc->sc_ah, 1); + } + ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_NETWORK_SLEEP); + } else { + ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE); + if (!(ah->caps.hw_caps & + ATH9K_HW_CAP_AUTOSLEEP)) { + ath9k_hw_setrxabort(sc->sc_ah, 0); + sc->sc_flags &= ~(SC_OP_WAIT_FOR_BEACON | + SC_OP_WAIT_FOR_CAB | + SC_OP_WAIT_FOR_PSPOLL_DATA | + SC_OP_WAIT_FOR_TX_ACK); + if (sc->imask & ATH9K_INT_TIM_TIMER) { + sc->imask &= ~ATH9K_INT_TIM_TIMER; + ath9k_hw_set_interrupts(sc->sc_ah, + sc->imask); + } + } + } + } + + if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { + struct ieee80211_channel *curchan = hw->conf.channel; + int pos = curchan->hw_value; + + aphy->chan_idx = pos; + aphy->chan_is_ht = conf_is_ht(conf); + + if (aphy->state == ATH_WIPHY_SCAN || + aphy->state == ATH_WIPHY_ACTIVE) + ath9k_wiphy_pause_all_forced(sc, aphy); + else { + /* + * Do not change operational channel based on a paused + * wiphy changes. + */ + goto skip_chan_change; + } + + DPRINTF(sc, ATH_DBG_CONFIG, "Set channel: %d MHz\n", + curchan->center_freq); + + /* XXX: remove me eventualy */ + ath9k_update_ichannel(sc, hw, &sc->sc_ah->channels[pos]); + + ath_update_chainmask(sc, conf_is_ht(conf)); + + if (ath_set_channel(sc, hw, &sc->sc_ah->channels[pos]) < 0) { + DPRINTF(sc, ATH_DBG_FATAL, "Unable to set channel\n"); + mutex_unlock(&sc->mutex); + return -EINVAL; + } + } + +skip_chan_change: + if (changed & IEEE80211_CONF_CHANGE_POWER) + sc->config.txpowlimit = 2 * conf->power_level; + + mutex_unlock(&sc->mutex); + + return 0; +} + +#define SUPPORTED_FILTERS \ + (FIF_PROMISC_IN_BSS | \ + FIF_ALLMULTI | \ + FIF_CONTROL | \ + FIF_OTHER_BSS | \ + FIF_BCN_PRBRESP_PROMISC | \ + FIF_FCSFAIL) + +/* FIXME: sc->sc_full_reset ? */ +static void ath9k_configure_filter(struct ieee80211_hw *hw, + unsigned int changed_flags, + unsigned int *total_flags, + int mc_count, + struct dev_mc_list *mclist) +{ + struct ath_wiphy *aphy = hw->priv; + struct ath_softc *sc = aphy->sc; + u32 rfilt; + + changed_flags &= SUPPORTED_FILTERS; + *total_flags &= SUPPORTED_FILTERS; + + sc->rx.rxfilter = *total_flags; + ath9k_ps_wakeup(sc); + rfilt = ath_calcrxfilter(sc); + ath9k_hw_setrxfilter(sc->sc_ah, rfilt); + ath9k_ps_restore(sc); + + DPRINTF(sc, ATH_DBG_CONFIG, "Set HW RX filter: 0x%x\n", sc->rx.rxfilter); +} + +static void ath9k_sta_notify(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + enum sta_notify_cmd cmd, + struct ieee80211_sta *sta) +{ + struct ath_wiphy *aphy = hw->priv; + struct ath_softc *sc = aphy->sc; + + switch (cmd) { + case STA_NOTIFY_ADD: + ath_node_attach(sc, sta); + break; + case STA_NOTIFY_REMOVE: + ath_node_detach(sc, sta); + break; + default: + break; + } +} + +static int ath9k_conf_tx(struct ieee80211_hw *hw, u16 queue, + const struct ieee80211_tx_queue_params *params) +{ + struct ath_wiphy *aphy = hw->priv; + struct ath_softc *sc = aphy->sc; + struct ath9k_tx_queue_info qi; + int ret = 0, qnum; + + if (queue >= WME_NUM_AC) + return 0; + + mutex_lock(&sc->mutex); + + memset(&qi, 0, sizeof(struct ath9k_tx_queue_info)); + + qi.tqi_aifs = params->aifs; + qi.tqi_cwmin = params->cw_min; + qi.tqi_cwmax = params->cw_max; + qi.tqi_burstTime = params->txop; + qnum = ath_get_hal_qnum(queue, sc); + + DPRINTF(sc, ATH_DBG_CONFIG, + "Configure tx [queue/halq] [%d/%d], " + "aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n", + queue, qnum, params->aifs, params->cw_min, + params->cw_max, params->txop); + + ret = ath_txq_update(sc, qnum, &qi); + if (ret) + DPRINTF(sc, ATH_DBG_FATAL, "TXQ Update failed\n"); + + mutex_unlock(&sc->mutex); + + return ret; +} + +static int ath9k_set_key(struct ieee80211_hw *hw, + enum set_key_cmd cmd, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + struct ieee80211_key_conf *key) +{ + struct ath_wiphy *aphy = hw->priv; + struct ath_softc *sc = aphy->sc; + int ret = 0; + + if (modparam_nohwcrypt) + return -ENOSPC; + + mutex_lock(&sc->mutex); + ath9k_ps_wakeup(sc); + DPRINTF(sc, ATH_DBG_CONFIG, "Set HW Key\n"); + + switch (cmd) { + case SET_KEY: + ret = ath_key_config(sc, vif, sta, key); + if (ret >= 0) { + key->hw_key_idx = ret; + /* push IV and Michael MIC generation to stack */ + key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + if (key->alg == ALG_TKIP) + key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; + if (sc->sc_ah->sw_mgmt_crypto && key->alg == ALG_CCMP) + key->flags |= IEEE80211_KEY_FLAG_SW_MGMT; + ret = 0; + } + break; + case DISABLE_KEY: + ath_key_delete(sc, key); + break; + default: + ret = -EINVAL; + } + + ath9k_ps_restore(sc); + mutex_unlock(&sc->mutex); + + return ret; +} + +static void ath9k_bss_info_changed(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss_conf, + u32 changed) +{ + struct ath_wiphy *aphy = hw->priv; + struct ath_softc *sc = aphy->sc; + struct ath_hw *ah = sc->sc_ah; + struct ath_vif *avp = (void *)vif->drv_priv; + u32 rfilt = 0; + int error, i; + + mutex_lock(&sc->mutex); + + /* + * TODO: Need to decide which hw opmode to use for + * multi-interface cases + * XXX: This belongs into add_interface! + */ + if (vif->type == NL80211_IFTYPE_AP && + ah->opmode != NL80211_IFTYPE_AP) { + ah->opmode = NL80211_IFTYPE_STATION; + ath9k_hw_setopmode(ah); + memcpy(sc->curbssid, sc->sc_ah->macaddr, ETH_ALEN); + sc->curaid = 0; + ath9k_hw_write_associd(sc); + /* Request full reset to get hw opmode changed properly */ + sc->sc_flags |= SC_OP_FULL_RESET; + } + + if ((changed & BSS_CHANGED_BSSID) && + !is_zero_ether_addr(bss_conf->bssid)) { + switch (vif->type) { + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_MESH_POINT: + /* Set BSSID */ + memcpy(sc->curbssid, bss_conf->bssid, ETH_ALEN); + memcpy(avp->bssid, bss_conf->bssid, ETH_ALEN); + sc->curaid = 0; + ath9k_hw_write_associd(sc); + + /* Set aggregation protection mode parameters */ + sc->config.ath_aggr_prot = 0; + + DPRINTF(sc, ATH_DBG_CONFIG, + "RX filter 0x%x bssid %pM aid 0x%x\n", + rfilt, sc->curbssid, sc->curaid); + + /* need to reconfigure the beacon */ + sc->sc_flags &= ~SC_OP_BEACONS ; + + break; + default: + break; + } + } + + if ((vif->type == NL80211_IFTYPE_ADHOC) || + (vif->type == NL80211_IFTYPE_AP) || + (vif->type == NL80211_IFTYPE_MESH_POINT)) { + if ((changed & BSS_CHANGED_BEACON) || + (changed & BSS_CHANGED_BEACON_ENABLED && + bss_conf->enable_beacon)) { + /* + * Allocate and setup the beacon frame. + * + * Stop any previous beacon DMA. This may be + * necessary, for example, when an ibss merge + * causes reconfiguration; we may be called + * with beacon transmission active. + */ + ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq); + + error = ath_beacon_alloc(aphy, vif); + if (!error) + ath_beacon_config(sc, vif); + } + } + + /* Check for WLAN_CAPABILITY_PRIVACY ? */ + if ((avp->av_opmode != NL80211_IFTYPE_STATION)) { + for (i = 0; i < IEEE80211_WEP_NKID; i++) + if (ath9k_hw_keyisvalid(sc->sc_ah, (u16)i)) + ath9k_hw_keysetmac(sc->sc_ah, + (u16)i, + sc->curbssid); + } + + /* Only legacy IBSS for now */ + if (vif->type == NL80211_IFTYPE_ADHOC) + ath_update_chainmask(sc, 0); + + if (changed & BSS_CHANGED_ERP_PREAMBLE) { + DPRINTF(sc, ATH_DBG_CONFIG, "BSS Changed PREAMBLE %d\n", + bss_conf->use_short_preamble); + if (bss_conf->use_short_preamble) + sc->sc_flags |= SC_OP_PREAMBLE_SHORT; + else + sc->sc_flags &= ~SC_OP_PREAMBLE_SHORT; + } + + if (changed & BSS_CHANGED_ERP_CTS_PROT) { + DPRINTF(sc, ATH_DBG_CONFIG, "BSS Changed CTS PROT %d\n", + bss_conf->use_cts_prot); + if (bss_conf->use_cts_prot && + hw->conf.channel->band != IEEE80211_BAND_5GHZ) + sc->sc_flags |= SC_OP_PROTECT_ENABLE; + else + sc->sc_flags &= ~SC_OP_PROTECT_ENABLE; + } + + if (changed & BSS_CHANGED_ASSOC) { + DPRINTF(sc, ATH_DBG_CONFIG, "BSS Changed ASSOC %d\n", + bss_conf->assoc); + ath9k_bss_assoc_info(sc, vif, bss_conf); + } + + /* + * The HW TSF has to be reset when the beacon interval changes. + * We set the flag here, and ath_beacon_config_ap() would take this + * into account when it gets called through the subsequent + * config_interface() call - with IFCC_BEACON in the changed field. + */ + + if (changed & BSS_CHANGED_BEACON_INT) { + sc->sc_flags |= SC_OP_TSF_RESET; + sc->beacon_interval = bss_conf->beacon_int; + } + + mutex_unlock(&sc->mutex); +} + +static u64 ath9k_get_tsf(struct ieee80211_hw *hw) +{ + u64 tsf; + struct ath_wiphy *aphy = hw->priv; + struct ath_softc *sc = aphy->sc; + + mutex_lock(&sc->mutex); + tsf = ath9k_hw_gettsf64(sc->sc_ah); + mutex_unlock(&sc->mutex); + + return tsf; +} + +static void ath9k_set_tsf(struct ieee80211_hw *hw, u64 tsf) +{ + struct ath_wiphy *aphy = hw->priv; + struct ath_softc *sc = aphy->sc; + + mutex_lock(&sc->mutex); + ath9k_hw_settsf64(sc->sc_ah, tsf); + mutex_unlock(&sc->mutex); +} + +static void ath9k_reset_tsf(struct ieee80211_hw *hw) +{ + struct ath_wiphy *aphy = hw->priv; + struct ath_softc *sc = aphy->sc; + + mutex_lock(&sc->mutex); + ath9k_hw_reset_tsf(sc->sc_ah); + mutex_unlock(&sc->mutex); +} + +static int ath9k_ampdu_action(struct ieee80211_hw *hw, + enum ieee80211_ampdu_mlme_action action, + struct ieee80211_sta *sta, + u16 tid, u16 *ssn) +{ + struct ath_wiphy *aphy = hw->priv; + struct ath_softc *sc = aphy->sc; + int ret = 0; + + switch (action) { + case IEEE80211_AMPDU_RX_START: + if (!(sc->sc_flags & SC_OP_RXAGGR)) + ret = -ENOTSUPP; + break; + case IEEE80211_AMPDU_RX_STOP: + break; + case IEEE80211_AMPDU_TX_START: + ret = ath_tx_aggr_start(sc, sta, tid, ssn); + if (ret < 0) + DPRINTF(sc, ATH_DBG_FATAL, + "Unable to start TX aggregation\n"); + else + ieee80211_start_tx_ba_cb_irqsafe(hw, sta->addr, tid); + break; + case IEEE80211_AMPDU_TX_STOP: + ret = ath_tx_aggr_stop(sc, sta, tid); + if (ret < 0) + DPRINTF(sc, ATH_DBG_FATAL, + "Unable to stop TX aggregation\n"); + + ieee80211_stop_tx_ba_cb_irqsafe(hw, sta->addr, tid); + break; + case IEEE80211_AMPDU_TX_OPERATIONAL: + ath_tx_aggr_resume(sc, sta, tid); + break; + default: + DPRINTF(sc, ATH_DBG_FATAL, "Unknown AMPDU action\n"); + } + + return ret; +} + +static void ath9k_sw_scan_start(struct ieee80211_hw *hw) +{ + struct ath_wiphy *aphy = hw->priv; + struct ath_softc *sc = aphy->sc; + + if (ath9k_wiphy_scanning(sc)) { + printk(KERN_DEBUG "ath9k: Two wiphys trying to scan at the " + "same time\n"); + /* + * Do not allow the concurrent scanning state for now. This + * could be improved with scanning control moved into ath9k. + */ + return; + } + + aphy->state = ATH_WIPHY_SCAN; + ath9k_wiphy_pause_all_forced(sc, aphy); + + mutex_lock(&sc->mutex); + sc->sc_flags |= SC_OP_SCANNING; + mutex_unlock(&sc->mutex); +} + +static void ath9k_sw_scan_complete(struct ieee80211_hw *hw) +{ + struct ath_wiphy *aphy = hw->priv; + struct ath_softc *sc = aphy->sc; + + mutex_lock(&sc->mutex); + aphy->state = ATH_WIPHY_ACTIVE; + sc->sc_flags &= ~SC_OP_SCANNING; + sc->sc_flags |= SC_OP_FULL_RESET; + mutex_unlock(&sc->mutex); +} + +struct ieee80211_ops ath9k_ops = { + .tx = ath9k_tx, + .start = ath9k_start, + .stop = ath9k_stop, + .add_interface = ath9k_add_interface, + .remove_interface = ath9k_remove_interface, + .config = ath9k_config, + .configure_filter = ath9k_configure_filter, + .sta_notify = ath9k_sta_notify, + .conf_tx = ath9k_conf_tx, + .bss_info_changed = ath9k_bss_info_changed, + .set_key = ath9k_set_key, + .get_tsf = ath9k_get_tsf, + .set_tsf = ath9k_set_tsf, + .reset_tsf = ath9k_reset_tsf, + .ampdu_action = ath9k_ampdu_action, + .sw_scan_start = ath9k_sw_scan_start, + .sw_scan_complete = ath9k_sw_scan_complete, +}; + +static struct { + u32 version; + const char * name; +} ath_mac_bb_names[] = { + { AR_SREV_VERSION_5416_PCI, "5416" }, + { AR_SREV_VERSION_5416_PCIE, "5418" }, + { AR_SREV_VERSION_9100, "9100" }, + { AR_SREV_VERSION_9160, "9160" }, + { AR_SREV_VERSION_9280, "9280" }, + { AR_SREV_VERSION_9285, "9285" } +}; + +static struct { + u16 version; + const char * name; +} ath_rf_names[] = { + { 0, "5133" }, + { AR_RAD5133_SREV_MAJOR, "5133" }, + { AR_RAD5122_SREV_MAJOR, "5122" }, + { AR_RAD2133_SREV_MAJOR, "2133" }, + { AR_RAD2122_SREV_MAJOR, "2122" } +}; + +/* + * Return the MAC/BB name. "????" is returned if the MAC/BB is unknown. + */ +const char * +ath_mac_bb_name(u32 mac_bb_version) +{ + int i; + + for (i=0; i<ARRAY_SIZE(ath_mac_bb_names); i++) { + if (ath_mac_bb_names[i].version == mac_bb_version) { + return ath_mac_bb_names[i].name; + } + } + + return "????"; +} + +/* + * Return the RF name. "????" is returned if the RF is unknown. + */ +const char * +ath_rf_name(u16 rf_version) +{ + int i; + + for (i=0; i<ARRAY_SIZE(ath_rf_names); i++) { + if (ath_rf_names[i].version == rf_version) { + return ath_rf_names[i].name; + } + } + + return "????"; +} + +static int __init ath9k_init(void) +{ + int error; + + /* Register rate control algorithm */ + error = ath_rate_control_register(); + if (error != 0) { + printk(KERN_ERR + "ath9k: Unable to register rate control " + "algorithm: %d\n", + error); + goto err_out; + } + + error = ath9k_debug_create_root(); + if (error) { + printk(KERN_ERR + "ath9k: Unable to create debugfs root: %d\n", + error); + goto err_rate_unregister; + } + + error = ath_pci_init(); + if (error < 0) { + printk(KERN_ERR + "ath9k: No PCI devices found, driver not installed.\n"); + error = -ENODEV; + goto err_remove_root; + } + + error = ath_ahb_init(); + if (error < 0) { + error = -ENODEV; + goto err_pci_exit; + } + + return 0; + + err_pci_exit: + ath_pci_exit(); + + err_remove_root: + ath9k_debug_remove_root(); + err_rate_unregister: + ath_rate_control_unregister(); + err_out: + return error; +} +module_init(ath9k_init); + +static void __exit ath9k_exit(void) +{ + ath_ahb_exit(); + ath_pci_exit(); + ath9k_debug_remove_root(); + ath_rate_control_unregister(); + printk(KERN_INFO "%s: Driver unloaded\n", dev_info); +} +module_exit(ath9k_exit); |