diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath5k')
30 files changed, 2943 insertions, 1300 deletions
diff --git a/drivers/net/wireless/ath/ath5k/Kconfig b/drivers/net/wireless/ath/ath5k/Kconfig index e18a9aa7b6c..c9f81a388f1 100644 --- a/drivers/net/wireless/ath/ath5k/Kconfig +++ b/drivers/net/wireless/ath/ath5k/Kconfig @@ -1,6 +1,7 @@ config ATH5K tristate "Atheros 5xxx wireless cards support" depends on (PCI || ATHEROS_AR231X) && MAC80211 + select ATH_COMMON select MAC80211_LEDS select LEDS_CLASS select NEW_LEDS @@ -64,3 +65,11 @@ config ATH5K_PCI ---help--- This adds support for PCI type chipsets of the 5xxx Atheros family. + +config ATH5K_TEST_CHANNELS + bool "Enables testing channels on ath5k" + depends on ATH5K && CFG80211_CERTIFICATION_ONUS + ---help--- + This enables non-standard IEEE 802.11 channels on ath5k, which + can be used for research purposes. This option should be disabled + unless doing research. diff --git a/drivers/net/wireless/ath/ath5k/Makefile b/drivers/net/wireless/ath/ath5k/Makefile index f60b3899afc..1b3a34f7f22 100644 --- a/drivers/net/wireless/ath/ath5k/Makefile +++ b/drivers/net/wireless/ath/ath5k/Makefile @@ -10,6 +10,7 @@ ath5k-y += phy.o ath5k-y += reset.o ath5k-y += attach.o ath5k-y += base.o +CFLAGS_base.o += -I$(src) ath5k-y += led.o ath5k-y += rfkill.o ath5k-y += ani.o diff --git a/drivers/net/wireless/ath/ath5k/ahb.c b/drivers/net/wireless/ath/ath5k/ahb.c index e5be7e70181..79bffe165ca 100644 --- a/drivers/net/wireless/ath/ath5k/ahb.c +++ b/drivers/net/wireless/ath/ath5k/ahb.c @@ -19,6 +19,7 @@ #include <linux/nl80211.h> #include <linux/platform_device.h> #include <linux/etherdevice.h> +#include <linux/export.h> #include <ar231x_platform.h> #include "ath5k.h" #include "debug.h" @@ -36,12 +37,9 @@ ath5k_ahb_eeprom_read(struct ath_common *common, u32 off, u16 *data) { struct ath5k_hw *ah = common->priv; struct platform_device *pdev = to_platform_device(ah->dev); - struct ar231x_board_config *bcfg = pdev->dev.platform_data; + struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev); u16 *eeprom, *eeprom_end; - - - bcfg = pdev->dev.platform_data; eeprom = (u16 *) bcfg->radio; eeprom_end = ((void *) bcfg->config) + BOARD_CONFIG_BUFSZ; @@ -56,7 +54,7 @@ ath5k_ahb_eeprom_read(struct ath_common *common, u32 off, u16 *data) int ath5k_hw_read_srev(struct ath5k_hw *ah) { struct platform_device *pdev = to_platform_device(ah->dev); - struct ar231x_board_config *bcfg = pdev->dev.platform_data; + struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev); ah->ah_mac_srev = bcfg->devid; return 0; } @@ -64,7 +62,7 @@ int ath5k_hw_read_srev(struct ath5k_hw *ah) static int ath5k_ahb_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac) { struct platform_device *pdev = to_platform_device(ah->dev); - struct ar231x_board_config *bcfg = pdev->dev.platform_data; + struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev); u8 *cfg_mac; if (to_platform_device(ah->dev)->id == 0) @@ -86,7 +84,7 @@ static const struct ath_bus_ops ath_ahb_bus_ops = { /*Initialization*/ static int ath_ahb_probe(struct platform_device *pdev) { - struct ar231x_board_config *bcfg = pdev->dev.platform_data; + struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev); struct ath5k_hw *ah; struct ieee80211_hw *hw; struct resource *res; @@ -95,7 +93,7 @@ static int ath_ahb_probe(struct platform_device *pdev) int ret = 0; u32 reg; - if (!pdev->dev.platform_data) { + if (!dev_get_platdata(&pdev->dev)) { dev_err(&pdev->dev, "no platform data specified\n"); ret = -EINVAL; goto err_out; @@ -119,7 +117,7 @@ static int ath_ahb_probe(struct platform_device *pdev) if (res == NULL) { dev_err(&pdev->dev, "no IRQ resource found\n"); ret = -ENXIO; - goto err_out; + goto err_iounmap; } irq = res->start; @@ -128,7 +126,7 @@ static int ath_ahb_probe(struct platform_device *pdev) if (hw == NULL) { dev_err(&pdev->dev, "no memory for ieee80211_hw\n"); ret = -ENOMEM; - goto err_out; + goto err_iounmap; } ah = hw->priv; @@ -140,23 +138,23 @@ static int ath_ahb_probe(struct platform_device *pdev) if (bcfg->devid >= AR5K_SREV_AR2315_R6) { /* Enable WMAC AHB arbitration */ - reg = __raw_readl((void __iomem *) AR5K_AR2315_AHB_ARB_CTL); + reg = ioread32((void __iomem *) AR5K_AR2315_AHB_ARB_CTL); reg |= AR5K_AR2315_AHB_ARB_CTL_WLAN; - __raw_writel(reg, (void __iomem *) AR5K_AR2315_AHB_ARB_CTL); + iowrite32(reg, (void __iomem *) AR5K_AR2315_AHB_ARB_CTL); /* Enable global WMAC swapping */ - reg = __raw_readl((void __iomem *) AR5K_AR2315_BYTESWAP); + reg = ioread32((void __iomem *) AR5K_AR2315_BYTESWAP); reg |= AR5K_AR2315_BYTESWAP_WMAC; - __raw_writel(reg, (void __iomem *) AR5K_AR2315_BYTESWAP); + iowrite32(reg, (void __iomem *) AR5K_AR2315_BYTESWAP); } else { /* Enable WMAC DMA access (assuming 5312 or 231x*/ /* TODO: check other platforms */ - reg = __raw_readl((void __iomem *) AR5K_AR5312_ENABLE); + reg = ioread32((void __iomem *) AR5K_AR5312_ENABLE); if (to_platform_device(ah->dev)->id == 0) reg |= AR5K_AR5312_ENABLE_WLAN0; else reg |= AR5K_AR5312_ENABLE_WLAN1; - __raw_writel(reg, (void __iomem *) AR5K_AR5312_ENABLE); + iowrite32(reg, (void __iomem *) AR5K_AR5312_ENABLE); /* * On a dual-band AR5312, the multiband radio is only @@ -166,7 +164,9 @@ static int ath_ahb_probe(struct platform_device *pdev) if (to_platform_device(ah->dev)->id == 0 && (bcfg->config->flags & (BD_WLAN0 | BD_WLAN1)) == (BD_WLAN1 | BD_WLAN0)) - __set_bit(ATH_STAT_2G_DISABLED, ah->status); + ah->ah_capabilities.cap_needs_2GHz_ovr = true; + else + ah->ah_capabilities.cap_needs_2GHz_ovr = false; } ret = ath5k_init_ah(ah, &ath_ahb_bus_ops); @@ -182,14 +182,15 @@ static int ath_ahb_probe(struct platform_device *pdev) err_free_hw: ieee80211_free_hw(hw); - platform_set_drvdata(pdev, NULL); + err_iounmap: + iounmap(mem); err_out: return ret; } static int ath_ahb_remove(struct platform_device *pdev) { - struct ar231x_board_config *bcfg = pdev->dev.platform_data; + struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev); struct ieee80211_hw *hw = platform_get_drvdata(pdev); struct ath5k_hw *ah; u32 reg; @@ -201,21 +202,21 @@ static int ath_ahb_remove(struct platform_device *pdev) if (bcfg->devid >= AR5K_SREV_AR2315_R6) { /* Disable WMAC AHB arbitration */ - reg = __raw_readl((void __iomem *) AR5K_AR2315_AHB_ARB_CTL); + reg = ioread32((void __iomem *) AR5K_AR2315_AHB_ARB_CTL); reg &= ~AR5K_AR2315_AHB_ARB_CTL_WLAN; - __raw_writel(reg, (void __iomem *) AR5K_AR2315_AHB_ARB_CTL); + iowrite32(reg, (void __iomem *) AR5K_AR2315_AHB_ARB_CTL); } else { /*Stop DMA access */ - reg = __raw_readl((void __iomem *) AR5K_AR5312_ENABLE); + reg = ioread32((void __iomem *) AR5K_AR5312_ENABLE); if (to_platform_device(ah->dev)->id == 0) reg &= ~AR5K_AR5312_ENABLE_WLAN0; else reg &= ~AR5K_AR5312_ENABLE_WLAN1; - __raw_writel(reg, (void __iomem *) AR5K_AR5312_ENABLE); + iowrite32(reg, (void __iomem *) AR5K_AR5312_ENABLE); } ath5k_deinit_ah(ah); - platform_set_drvdata(pdev, NULL); + iounmap(ah->iobase); ieee80211_free_hw(hw); return 0; @@ -230,17 +231,4 @@ static struct platform_driver ath_ahb_driver = { }, }; -static int __init -ath5k_ahb_init(void) -{ - return platform_driver_register(&ath_ahb_driver); -} - -static void __exit -ath5k_ahb_exit(void) -{ - platform_driver_unregister(&ath_ahb_driver); -} - -module_init(ath5k_ahb_init); -module_exit(ath5k_ahb_exit); +module_platform_driver(ath_ahb_driver); diff --git a/drivers/net/wireless/ath/ath5k/ani.c b/drivers/net/wireless/ath/ath5k/ani.c index bea90e6be70..5c008757662 100644 --- a/drivers/net/wireless/ath/ath5k/ani.c +++ b/drivers/net/wireless/ath/ath5k/ani.c @@ -14,6 +14,8 @@ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include "ath5k.h" #include "reg.h" #include "debug.h" @@ -27,15 +29,21 @@ * or reducing sensitivity as necessary. * * The parameters are: + * * - "noise immunity" + * * - "spur immunity" + * * - "firstep level" + * * - "OFDM weak signal detection" + * * - "CCK weak signal detection" * * Basically we look at the amount of ODFM and CCK timing errors we get and then * raise or lower immunity accordingly by setting one or more of these * parameters. + * * Newer chipsets have PHY error counters in hardware which will generate a MIB * interrupt when they overflow. Older hardware has too enable PHY error frames * by setting a RX flag and then count every single PHY error. When a specified @@ -45,11 +53,13 @@ */ -/*** ANI parameter control ***/ +/***********************\ +* ANI parameter control * +\***********************/ /** * ath5k_ani_set_noise_immunity_level() - Set noise immunity level - * + * @ah: The &struct ath5k_hw * @level: level between 0 and @ATH5K_ANI_MAX_NOISE_IMM_LVL */ void @@ -91,12 +101,11 @@ ath5k_ani_set_noise_immunity_level(struct ath5k_hw *ah, int level) ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "new level %d", level); } - /** * ath5k_ani_set_spur_immunity_level() - Set spur immunity level - * + * @ah: The &struct ath5k_hw * @level: level between 0 and @max_spur_level (the maximum level is dependent - * on the chip revision). + * on the chip revision). */ void ath5k_ani_set_spur_immunity_level(struct ath5k_hw *ah, int level) @@ -117,10 +126,9 @@ ath5k_ani_set_spur_immunity_level(struct ath5k_hw *ah, int level) ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "new level %d", level); } - /** * ath5k_ani_set_firstep_level() - Set "firstep" level - * + * @ah: The &struct ath5k_hw * @level: level between 0 and @ATH5K_ANI_MAX_FIRSTEP_LVL */ void @@ -140,11 +148,9 @@ ath5k_ani_set_firstep_level(struct ath5k_hw *ah, int level) ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "new level %d", level); } - /** - * ath5k_ani_set_ofdm_weak_signal_detection() - Control OFDM weak signal - * detection - * + * ath5k_ani_set_ofdm_weak_signal_detection() - Set OFDM weak signal detection + * @ah: The &struct ath5k_hw * @on: turn on or off */ void @@ -182,10 +188,9 @@ ath5k_ani_set_ofdm_weak_signal_detection(struct ath5k_hw *ah, bool on) on ? "on" : "off"); } - /** - * ath5k_ani_set_cck_weak_signal_detection() - control CCK weak signal detection - * + * ath5k_ani_set_cck_weak_signal_detection() - Set CCK weak signal detection + * @ah: The &struct ath5k_hw * @on: turn on or off */ void @@ -200,13 +205,16 @@ ath5k_ani_set_cck_weak_signal_detection(struct ath5k_hw *ah, bool on) } -/*** ANI algorithm ***/ +/***************\ +* ANI algorithm * +\***************/ /** * ath5k_ani_raise_immunity() - Increase noise immunity - * + * @ah: The &struct ath5k_hw + * @as: The &struct ath5k_ani_state * @ofdm_trigger: If this is true we are called because of too many OFDM errors, - * the algorithm will tune more parameters then. + * the algorithm will tune more parameters then. * * Try to raise noise immunity (=decrease sensitivity) in several steps * depending on the average RSSI of the beacons we received. @@ -251,7 +259,7 @@ ath5k_ani_raise_immunity(struct ath5k_hw *ah, struct ath5k_ani_state *as, "beacon RSSI high"); /* only OFDM: beacon RSSI is high, we can disable ODFM weak * signal detection */ - if (ofdm_trigger && as->ofdm_weak_sig == true) { + if (ofdm_trigger && as->ofdm_weak_sig) { ath5k_ani_set_ofdm_weak_signal_detection(ah, false); ath5k_ani_set_spur_immunity_level(ah, 0); return; @@ -266,7 +274,7 @@ ath5k_ani_raise_immunity(struct ath5k_hw *ah, struct ath5k_ani_state *as, * but can raise firstep level */ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "beacon RSSI mid"); - if (ofdm_trigger && as->ofdm_weak_sig == false) + if (ofdm_trigger && !as->ofdm_weak_sig) ath5k_ani_set_ofdm_weak_signal_detection(ah, true); if (as->firstep_level < ATH5K_ANI_MAX_FIRSTEP_LVL) ath5k_ani_set_firstep_level(ah, as->firstep_level + 1); @@ -276,7 +284,7 @@ ath5k_ani_raise_immunity(struct ath5k_hw *ah, struct ath5k_ani_state *as, * detect and zero firstep level to maximize CCK sensitivity */ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "beacon RSSI low, 2GHz"); - if (ofdm_trigger && as->ofdm_weak_sig == true) + if (ofdm_trigger && as->ofdm_weak_sig) ath5k_ani_set_ofdm_weak_signal_detection(ah, false); if (as->firstep_level > 0) ath5k_ani_set_firstep_level(ah, 0); @@ -290,9 +298,10 @@ ath5k_ani_raise_immunity(struct ath5k_hw *ah, struct ath5k_ani_state *as, */ } - /** * ath5k_ani_lower_immunity() - Decrease noise immunity + * @ah: The &struct ath5k_hw + * @as: The &struct ath5k_ani_state * * Try to lower noise immunity (=increase sensitivity) in several steps * depending on the average RSSI of the beacons we received. @@ -319,7 +328,7 @@ ath5k_ani_lower_immunity(struct ath5k_hw *ah, struct ath5k_ani_state *as) } else if (rssi > ATH5K_ANI_RSSI_THR_LOW) { /* beacon RSSI is mid-range: turn on ODFM weak signal * detection and next, lower firstep level */ - if (as->ofdm_weak_sig == false) { + if (!as->ofdm_weak_sig) { ath5k_ani_set_ofdm_weak_signal_detection(ah, true); return; @@ -352,9 +361,10 @@ ath5k_ani_lower_immunity(struct ath5k_hw *ah, struct ath5k_ani_state *as) } } - /** * ath5k_hw_ani_get_listen_time() - Update counters and return listening time + * @ah: The &struct ath5k_hw + * @as: The &struct ath5k_ani_state * * Return an approximation of the time spent "listening" in milliseconds (ms) * since the last call of this function. @@ -379,9 +389,10 @@ ath5k_hw_ani_get_listen_time(struct ath5k_hw *ah, struct ath5k_ani_state *as) return listen; } - /** * ath5k_ani_save_and_clear_phy_errors() - Clear and save PHY error counters + * @ah: The &struct ath5k_hw + * @as: The &struct ath5k_ani_state * * Clear the PHY error counters as soon as possible, since this might be called * from a MIB interrupt and we want to make sure we don't get interrupted again. @@ -429,14 +440,14 @@ ath5k_ani_save_and_clear_phy_errors(struct ath5k_hw *ah, return 1; } - /** * ath5k_ani_period_restart() - Restart ANI period + * @as: The &struct ath5k_ani_state * * Just reset counters, so they are clear for the next "ani period". */ static void -ath5k_ani_period_restart(struct ath5k_hw *ah, struct ath5k_ani_state *as) +ath5k_ani_period_restart(struct ath5k_ani_state *as) { /* keep last values for debugging */ as->last_ofdm_errors = as->ofdm_errors; @@ -448,9 +459,9 @@ ath5k_ani_period_restart(struct ath5k_hw *ah, struct ath5k_ani_state *as) as->listen_time = 0; } - /** * ath5k_ani_calibration() - The main ANI calibration function + * @ah: The &struct ath5k_hw * * We count OFDM and CCK errors relative to the time where we did not send or * receive ("listen" time) and raise or lower immunity accordingly. @@ -492,7 +503,7 @@ ath5k_ani_calibration(struct ath5k_hw *ah) /* too many PHY errors - we have to raise immunity */ bool ofdm_flag = as->ofdm_errors > ofdm_high ? true : false; ath5k_ani_raise_immunity(ah, as, ofdm_flag); - ath5k_ani_period_restart(ah, as); + ath5k_ani_period_restart(as); } else if (as->listen_time > 5 * ATH5K_ANI_LISTEN_PERIOD) { /* If more than 5 (TODO: why 5?) periods have passed and we got @@ -504,15 +515,18 @@ ath5k_ani_calibration(struct ath5k_hw *ah) if (as->ofdm_errors <= ofdm_low && as->cck_errors <= cck_low) ath5k_ani_lower_immunity(ah, as); - ath5k_ani_period_restart(ah, as); + ath5k_ani_period_restart(as); } } -/*** INTERRUPT HANDLER ***/ +/*******************\ +* Interrupt handler * +\*******************/ /** * ath5k_ani_mib_intr() - Interrupt handler for ANI MIB counters + * @ah: The &struct ath5k_hw * * Just read & reset the registers quickly, so they don't generate more * interrupts, save the counters and schedule the tasklet to decide whether @@ -549,9 +563,11 @@ ath5k_ani_mib_intr(struct ath5k_hw *ah) tasklet_schedule(&ah->ani_tasklet); } - /** - * ath5k_ani_phy_error_report() - Used by older HW to report PHY errors + * ath5k_ani_phy_error_report - Used by older HW to report PHY errors + * + * @ah: The &struct ath5k_hw + * @phyerr: One of enum ath5k_phy_error_code * * This is used by hardware without PHY error counters to report PHY errors * on a frame-by-frame basis, instead of the interrupt. @@ -574,10 +590,13 @@ ath5k_ani_phy_error_report(struct ath5k_hw *ah, } -/*** INIT ***/ +/****************\ +* Initialization * +\****************/ /** * ath5k_enable_phy_err_counters() - Enable PHY error counters + * @ah: The &struct ath5k_hw * * Enable PHY error counters for OFDM and CCK timing errors. */ @@ -596,9 +615,9 @@ ath5k_enable_phy_err_counters(struct ath5k_hw *ah) ath5k_hw_reg_write(ah, 0, AR5K_CCK_FIL_CNT); } - /** * ath5k_disable_phy_err_counters() - Disable PHY error counters + * @ah: The &struct ath5k_hw * * Disable PHY error counters for OFDM and CCK timing errors. */ @@ -615,10 +634,10 @@ ath5k_disable_phy_err_counters(struct ath5k_hw *ah) ath5k_hw_reg_write(ah, 0, AR5K_CCK_FIL_CNT); } - /** * ath5k_ani_init() - Initialize ANI - * @mode: Which mode to use (auto, manual high, manual low, off) + * @ah: The &struct ath5k_hw + * @mode: One of enum ath5k_ani_mode * * Initialize ANI according to mode. */ @@ -695,41 +714,41 @@ ath5k_ani_init(struct ath5k_hw *ah, enum ath5k_ani_mode mode) } -/*** DEBUG ***/ +/**************\ +* Debug output * +\**************/ #ifdef CONFIG_ATH5K_DEBUG +/** + * ath5k_ani_print_counters() - Print ANI counters + * @ah: The &struct ath5k_hw + * + * Used for debugging ANI + */ void ath5k_ani_print_counters(struct ath5k_hw *ah) { /* clears too */ - printk(KERN_NOTICE "ACK fail\t%d\n", - ath5k_hw_reg_read(ah, AR5K_ACK_FAIL)); - printk(KERN_NOTICE "RTS fail\t%d\n", - ath5k_hw_reg_read(ah, AR5K_RTS_FAIL)); - printk(KERN_NOTICE "RTS success\t%d\n", - ath5k_hw_reg_read(ah, AR5K_RTS_OK)); - printk(KERN_NOTICE "FCS error\t%d\n", - ath5k_hw_reg_read(ah, AR5K_FCS_FAIL)); + pr_notice("ACK fail\t%d\n", ath5k_hw_reg_read(ah, AR5K_ACK_FAIL)); + pr_notice("RTS fail\t%d\n", ath5k_hw_reg_read(ah, AR5K_RTS_FAIL)); + pr_notice("RTS success\t%d\n", ath5k_hw_reg_read(ah, AR5K_RTS_OK)); + pr_notice("FCS error\t%d\n", ath5k_hw_reg_read(ah, AR5K_FCS_FAIL)); /* no clear */ - printk(KERN_NOTICE "tx\t%d\n", - ath5k_hw_reg_read(ah, AR5K_PROFCNT_TX)); - printk(KERN_NOTICE "rx\t%d\n", - ath5k_hw_reg_read(ah, AR5K_PROFCNT_RX)); - printk(KERN_NOTICE "busy\t%d\n", - ath5k_hw_reg_read(ah, AR5K_PROFCNT_RXCLR)); - printk(KERN_NOTICE "cycles\t%d\n", - ath5k_hw_reg_read(ah, AR5K_PROFCNT_CYCLE)); - - printk(KERN_NOTICE "AR5K_PHYERR_CNT1\t%d\n", - ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT1)); - printk(KERN_NOTICE "AR5K_PHYERR_CNT2\t%d\n", - ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT2)); - printk(KERN_NOTICE "AR5K_OFDM_FIL_CNT\t%d\n", - ath5k_hw_reg_read(ah, AR5K_OFDM_FIL_CNT)); - printk(KERN_NOTICE "AR5K_CCK_FIL_CNT\t%d\n", - ath5k_hw_reg_read(ah, AR5K_CCK_FIL_CNT)); + pr_notice("tx\t%d\n", ath5k_hw_reg_read(ah, AR5K_PROFCNT_TX)); + pr_notice("rx\t%d\n", ath5k_hw_reg_read(ah, AR5K_PROFCNT_RX)); + pr_notice("busy\t%d\n", ath5k_hw_reg_read(ah, AR5K_PROFCNT_RXCLR)); + pr_notice("cycles\t%d\n", ath5k_hw_reg_read(ah, AR5K_PROFCNT_CYCLE)); + + pr_notice("AR5K_PHYERR_CNT1\t%d\n", + ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT1)); + pr_notice("AR5K_PHYERR_CNT2\t%d\n", + ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT2)); + pr_notice("AR5K_OFDM_FIL_CNT\t%d\n", + ath5k_hw_reg_read(ah, AR5K_OFDM_FIL_CNT)); + pr_notice("AR5K_CCK_FIL_CNT\t%d\n", + ath5k_hw_reg_read(ah, AR5K_CCK_FIL_CNT)); } #endif diff --git a/drivers/net/wireless/ath/ath5k/ani.h b/drivers/net/wireless/ath/ath5k/ani.h index 7358b6c83c6..21aa355460b 100644 --- a/drivers/net/wireless/ath/ath5k/ani.h +++ b/drivers/net/wireless/ath/ath5k/ani.h @@ -40,13 +40,13 @@ enum ath5k_phy_error_code; * enum ath5k_ani_mode - mode for ANI / noise sensitivity * * @ATH5K_ANI_MODE_OFF: Turn ANI off. This can be useful to just stop the ANI - * algorithm after it has been on auto mode. - * ATH5K_ANI_MODE_MANUAL_LOW: Manually set all immunity parameters to low, - * maximizing sensitivity. ANI will not run. - * ATH5K_ANI_MODE_MANUAL_HIGH: Manually set all immunity parameters to high, - * minimizing sensitivity. ANI will not run. - * ATH5K_ANI_MODE_AUTO: Automatically control immunity parameters based on the - * amount of OFDM and CCK frame errors (default). + * algorithm after it has been on auto mode. + * @ATH5K_ANI_MODE_MANUAL_LOW: Manually set all immunity parameters to low, + * maximizing sensitivity. ANI will not run. + * @ATH5K_ANI_MODE_MANUAL_HIGH: Manually set all immunity parameters to high, + * minimizing sensitivity. ANI will not run. + * @ATH5K_ANI_MODE_AUTO: Automatically control immunity parameters based on the + * amount of OFDM and CCK frame errors (default). */ enum ath5k_ani_mode { ATH5K_ANI_MODE_OFF = 0, @@ -58,8 +58,22 @@ enum ath5k_ani_mode { /** * struct ath5k_ani_state - ANI state and associated counters - * - * @max_spur_level: the maximum spur level is chip dependent + * @ani_mode: One of enum ath5k_ani_mode + * @noise_imm_level: Noise immunity level + * @spur_level: Spur immunity level + * @firstep_level: FIRstep level + * @ofdm_weak_sig: OFDM weak signal detection state (on/off) + * @cck_weak_sig: CCK weak signal detection state (on/off) + * @max_spur_level: Max spur immunity level (chip specific) + * @listen_time: Listen time + * @ofdm_errors: OFDM timing error count + * @cck_errors: CCK timing error count + * @last_cc: The &struct ath_cycle_counters (for stats) + * @last_listen: Listen time from previous run (for stats) + * @last_ofdm_errors: OFDM timing error count from previous run (for tats) + * @last_cck_errors: CCK timing error count from previous run (for stats) + * @sum_ofdm_errors: Sum of OFDM timing errors (for stats) + * @sum_cck_errors: Sum of all CCK timing errors (for stats) */ struct ath5k_ani_state { enum ath5k_ani_mode ani_mode; diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h index fecbcd9a425..74bd54d6ace 100644 --- a/drivers/net/wireless/ath/ath5k/ath5k.h +++ b/drivers/net/wireless/ath/ath5k/ath5k.h @@ -29,6 +29,7 @@ #include <linux/average.h> #include <linux/leds.h> #include <net/mac80211.h> +#include <net/cfg80211.h> /* RX/TX descriptor hw structs * TODO: Driver part should only see sw structs */ @@ -76,26 +77,29 @@ GENERIC DRIVER DEFINITIONS \****************************/ -#define ATH5K_PRINTF(fmt, ...) \ - printk(KERN_WARNING "%s: " fmt, __func__, ##__VA_ARGS__) +#define ATH5K_PRINTF(fmt, ...) \ + pr_warn("%s: " fmt, __func__, ##__VA_ARGS__) -#define ATH5K_PRINTK(_sc, _level, _fmt, ...) \ - printk(_level "ath5k %s: " _fmt, \ - ((_sc) && (_sc)->hw) ? wiphy_name((_sc)->hw->wiphy) : "", \ - ##__VA_ARGS__) +void __printf(3, 4) +_ath5k_printk(const struct ath5k_hw *ah, const char *level, + const char *fmt, ...); -#define ATH5K_PRINTK_LIMIT(_sc, _level, _fmt, ...) do { \ - if (net_ratelimit()) \ - ATH5K_PRINTK(_sc, _level, _fmt, ##__VA_ARGS__); \ - } while (0) +#define ATH5K_PRINTK(_sc, _level, _fmt, ...) \ + _ath5k_printk(_sc, _level, _fmt, ##__VA_ARGS__) -#define ATH5K_INFO(_sc, _fmt, ...) \ +#define ATH5K_PRINTK_LIMIT(_sc, _level, _fmt, ...) \ +do { \ + if (net_ratelimit()) \ + ATH5K_PRINTK(_sc, _level, _fmt, ##__VA_ARGS__); \ +} while (0) + +#define ATH5K_INFO(_sc, _fmt, ...) \ ATH5K_PRINTK(_sc, KERN_INFO, _fmt, ##__VA_ARGS__) -#define ATH5K_WARN(_sc, _fmt, ...) \ +#define ATH5K_WARN(_sc, _fmt, ...) \ ATH5K_PRINTK_LIMIT(_sc, KERN_WARNING, _fmt, ##__VA_ARGS__) -#define ATH5K_ERR(_sc, _fmt, ...) \ +#define ATH5K_ERR(_sc, _fmt, ...) \ ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__) /* @@ -187,10 +191,9 @@ #define AR5K_TUNE_MAX_TXPOWER 63 #define AR5K_TUNE_DEFAULT_TXPOWER 25 #define AR5K_TUNE_TPC_TXPOWER false -#define ATH5K_TUNE_CALIBRATION_INTERVAL_FULL 10000 /* 10 sec */ +#define ATH5K_TUNE_CALIBRATION_INTERVAL_FULL 60000 /* 60 sec */ +#define ATH5K_TUNE_CALIBRATION_INTERVAL_SHORT 10000 /* 10 sec */ #define ATH5K_TUNE_CALIBRATION_INTERVAL_ANI 1000 /* 1 sec */ -#define ATH5K_TUNE_CALIBRATION_INTERVAL_NF 60000 /* 60 sec */ - #define ATH5K_TX_COMPLETE_POLL_INT 3000 /* 3 sec */ #define AR5K_INIT_CARR_SENSE_EN 1 @@ -262,16 +265,34 @@ #define AR5K_AGC_SETTLING_TURBO 37 -/* GENERIC CHIPSET DEFINITIONS */ -/* MAC Chips */ +/*****************************\ +* GENERIC CHIPSET DEFINITIONS * +\*****************************/ + +/** + * enum ath5k_version - MAC Chips + * @AR5K_AR5210: AR5210 (Crete) + * @AR5K_AR5211: AR5211 (Oahu/Maui) + * @AR5K_AR5212: AR5212 (Venice) and newer + */ enum ath5k_version { AR5K_AR5210 = 0, AR5K_AR5211 = 1, AR5K_AR5212 = 2, }; -/* PHY Chips */ +/** + * enum ath5k_radio - PHY Chips + * @AR5K_RF5110: RF5110 (Fez) + * @AR5K_RF5111: RF5111 (Sombrero) + * @AR5K_RF5112: RF2112/5112(A) (Derby/Derby2) + * @AR5K_RF2413: RF2413/2414 (Griffin/Griffin-Lite) + * @AR5K_RF5413: RF5413/5414/5424 (Eagle/Condor) + * @AR5K_RF2316: RF2315/2316 (Cobra SoC) + * @AR5K_RF2317: RF2317 (Spider SoC) + * @AR5K_RF2425: RF2425/2417 (Swan/Nalla) + */ enum ath5k_radio { AR5K_RF5110 = 0, AR5K_RF5111 = 1, @@ -303,11 +324,11 @@ enum ath5k_radio { #define AR5K_SREV_AR5213A 0x59 /* Hainan */ #define AR5K_SREV_AR2413 0x78 /* Griffin lite */ #define AR5K_SREV_AR2414 0x70 /* Griffin */ -#define AR5K_SREV_AR2315_R6 0x86 /* AP51-Light */ -#define AR5K_SREV_AR2315_R7 0x87 /* AP51-Full */ +#define AR5K_SREV_AR2315_R6 0x86 /* AP51-Light */ +#define AR5K_SREV_AR2315_R7 0x87 /* AP51-Full */ #define AR5K_SREV_AR5424 0x90 /* Condor */ -#define AR5K_SREV_AR2317_R1 0x90 /* AP61-Light */ -#define AR5K_SREV_AR2317_R2 0x91 /* AP61-Full */ +#define AR5K_SREV_AR2317_R1 0x90 /* AP61-Light */ +#define AR5K_SREV_AR2317_R2 0x91 /* AP61-Full */ #define AR5K_SREV_AR5413 0xa4 /* Eagle lite */ #define AR5K_SREV_AR5414 0xa0 /* Eagle */ #define AR5K_SREV_AR2415 0xb0 /* Talon */ @@ -344,32 +365,40 @@ enum ath5k_radio { /* TODO add support to mac80211 for vendor-specific rates and modes */ -/* +/** + * DOC: Atheros XR + * * Some of this information is based on Documentation from: * * http://madwifi-project.org/wiki/ChipsetFeatures/SuperAG * - * Modulation for Atheros' eXtended Range - range enhancing extension that is - * supposed to double the distance an Atheros client device can keep a - * connection with an Atheros access point. This is achieved by increasing - * the receiver sensitivity up to, -105dBm, which is about 20dB above what - * the 802.11 specifications demand. In addition, new (proprietary) data rates - * are introduced: 3, 2, 1, 0.5 and 0.25 MBit/s. + * Atheros' eXtended Range - range enhancing extension is a modulation scheme + * that is supposed to double the link distance between an Atheros XR-enabled + * client device with an Atheros XR-enabled access point. This is achieved + * by increasing the receiver sensitivity up to, -105dBm, which is about 20dB + * above what the 802.11 specifications demand. In addition, new (proprietary) + * data rates are introduced: 3, 2, 1, 0.5 and 0.25 MBit/s. * * Please note that can you either use XR or TURBO but you cannot use both, * they are exclusive. * + * Also note that we do not plan to support XR mode at least for now. You can + * get a mode similar to XR by using 5MHz bwmode. */ -#define MODULATION_XR 0x00000200 -/* - * Modulation for Atheros' Turbo G and Turbo A, its supposed to provide a - * throughput transmission speed up to 40Mbit/s-60Mbit/s at a 108Mbit/s - * signaling rate achieved through the bonding of two 54Mbit/s 802.11g - * channels. To use this feature your Access Point must also support it. + + +/** + * DOC: Atheros SuperAG + * + * In addition to XR we have another modulation scheme called TURBO mode + * that is supposed to provide a throughput transmission speed up to 40Mbit/s + * -60Mbit/s at a 108Mbit/s signaling rate achieved through the bonding of two + * 54Mbit/s 802.11g channels. To use this feature both ends must support it. * There is also a distinction between "static" and "dynamic" turbo modes: * * - Static: is the dumb version: devices set to this mode stick to it until * the mode is turned off. + * * - Dynamic: is the intelligent version, the network decides itself if it * is ok to use turbo. As soon as traffic is detected on adjacent channels * (which would get used in turbo mode), or when a non-turbo station joins @@ -383,24 +412,39 @@ enum ath5k_radio { * * http://www.pcworld.com/article/id,113428-page,1/article.html * - * The channel bonding seems to be driver specific though. In addition to - * deciding what channels will be used, these "Turbo" modes are accomplished - * by also enabling the following features: + * The channel bonding seems to be driver specific though. + * + * In addition to TURBO modes we also have the following features for even + * greater speed-up: * * - Bursting: allows multiple frames to be sent at once, rather than pausing * after each frame. Bursting is a standards-compliant feature that can be * used with any Access Point. + * * - Fast frames: increases the amount of information that can be sent per * frame, also resulting in a reduction of transmission overhead. It is a * proprietary feature that needs to be supported by the Access Point. + * * - Compression: data frames are compressed in real time using a Lempel Ziv * algorithm. This is done transparently. Once this feature is enabled, * compression and decompression takes place inside the chipset, without * putting additional load on the host CPU. * + * As with XR we also don't plan to support SuperAG features for now. You can + * get a mode similar to TURBO by using 40MHz bwmode. */ -#define MODULATION_TURBO 0x00000080 + +/** + * enum ath5k_driver_mode - PHY operation mode + * @AR5K_MODE_11A: 802.11a + * @AR5K_MODE_11B: 802.11b + * @AR5K_MODE_11G: 801.11g + * @AR5K_MODE_MAX: Used for boundary checks + * + * Do not change the order here, we use these as + * array indices and it also maps EEPROM structures. + */ enum ath5k_driver_mode { AR5K_MODE_11A = 0, AR5K_MODE_11B = 1, @@ -408,30 +452,64 @@ enum ath5k_driver_mode { AR5K_MODE_MAX = 3 }; +/** + * enum ath5k_ant_mode - Antenna operation mode + * @AR5K_ANTMODE_DEFAULT: Default antenna setup + * @AR5K_ANTMODE_FIXED_A: Only antenna A is present + * @AR5K_ANTMODE_FIXED_B: Only antenna B is present + * @AR5K_ANTMODE_SINGLE_AP: STA locked on a single ap + * @AR5K_ANTMODE_SECTOR_AP: AP with tx antenna set on tx desc + * @AR5K_ANTMODE_SECTOR_STA: STA with tx antenna set on tx desc + * @AR5K_ANTMODE_DEBUG: Debug mode -A -> Rx, B-> Tx- + * @AR5K_ANTMODE_MAX: Used for boundary checks + * + * For more infos on antenna control check out phy.c + */ enum ath5k_ant_mode { - AR5K_ANTMODE_DEFAULT = 0, /* default antenna setup */ - AR5K_ANTMODE_FIXED_A = 1, /* only antenna A is present */ - AR5K_ANTMODE_FIXED_B = 2, /* only antenna B is present */ - AR5K_ANTMODE_SINGLE_AP = 3, /* sta locked on a single ap */ - AR5K_ANTMODE_SECTOR_AP = 4, /* AP with tx antenna set on tx desc */ - AR5K_ANTMODE_SECTOR_STA = 5, /* STA with tx antenna set on tx desc */ - AR5K_ANTMODE_DEBUG = 6, /* Debug mode -A -> Rx, B-> Tx- */ + AR5K_ANTMODE_DEFAULT = 0, + AR5K_ANTMODE_FIXED_A = 1, + AR5K_ANTMODE_FIXED_B = 2, + AR5K_ANTMODE_SINGLE_AP = 3, + AR5K_ANTMODE_SECTOR_AP = 4, + AR5K_ANTMODE_SECTOR_STA = 5, + AR5K_ANTMODE_DEBUG = 6, AR5K_ANTMODE_MAX, }; +/** + * enum ath5k_bw_mode - Bandwidth operation mode + * @AR5K_BWMODE_DEFAULT: 20MHz, default operation + * @AR5K_BWMODE_5MHZ: Quarter rate + * @AR5K_BWMODE_10MHZ: Half rate + * @AR5K_BWMODE_40MHZ: Turbo + */ enum ath5k_bw_mode { - AR5K_BWMODE_DEFAULT = 0, /* 20MHz, default operation */ - AR5K_BWMODE_5MHZ = 1, /* Quarter rate */ - AR5K_BWMODE_10MHZ = 2, /* Half rate */ - AR5K_BWMODE_40MHZ = 3 /* Turbo */ + AR5K_BWMODE_DEFAULT = 0, + AR5K_BWMODE_5MHZ = 1, + AR5K_BWMODE_10MHZ = 2, + AR5K_BWMODE_40MHZ = 3 }; + + /****************\ TX DEFINITIONS \****************/ -/* - * TX Status descriptor +/** + * struct ath5k_tx_status - TX Status descriptor + * @ts_seqnum: Sequence number + * @ts_tstamp: Timestamp + * @ts_status: Status code + * @ts_final_idx: Final transmission series index + * @ts_final_retry: Final retry count + * @ts_rssi: RSSI for received ACK + * @ts_shortretry: Short retry count + * @ts_virtcol: Virtual collision count + * @ts_antenna: Antenna used + * + * TX status descriptor gets filled by the hw + * on each transmission attempt. */ struct ath5k_tx_status { u16 ts_seqnum; @@ -454,7 +532,6 @@ struct ath5k_tx_status { * enum ath5k_tx_queue - Queue types used to classify tx queues. * @AR5K_TX_QUEUE_INACTIVE: q is unused -- see ath5k_hw_release_tx_queue * @AR5K_TX_QUEUE_DATA: A normal data queue - * @AR5K_TX_QUEUE_XR_DATA: An XR-data queue * @AR5K_TX_QUEUE_BEACON: The beacon queue * @AR5K_TX_QUEUE_CAB: The after-beacon queue * @AR5K_TX_QUEUE_UAPSD: Unscheduled Automatic Power Save Delivery queue @@ -462,7 +539,6 @@ struct ath5k_tx_status { enum ath5k_tx_queue { AR5K_TX_QUEUE_INACTIVE = 0, AR5K_TX_QUEUE_DATA, - AR5K_TX_QUEUE_XR_DATA, AR5K_TX_QUEUE_BEACON, AR5K_TX_QUEUE_CAB, AR5K_TX_QUEUE_UAPSD, @@ -471,36 +547,46 @@ enum ath5k_tx_queue { #define AR5K_NUM_TX_QUEUES 10 #define AR5K_NUM_TX_QUEUES_NOQCU 2 -/* - * Queue syb-types to classify normal data queues. +/** + * enum ath5k_tx_queue_subtype - Queue sub-types to classify normal data queues + * @AR5K_WME_AC_BK: Background traffic + * @AR5K_WME_AC_BE: Best-effort (normal) traffic + * @AR5K_WME_AC_VI: Video traffic + * @AR5K_WME_AC_VO: Voice traffic + * * These are the 4 Access Categories as defined in * WME spec. 0 is the lowest priority and 4 is the * highest. Normal data that hasn't been classified * goes to the Best Effort AC. */ enum ath5k_tx_queue_subtype { - AR5K_WME_AC_BK = 0, /*Background traffic*/ - AR5K_WME_AC_BE, /*Best-effort (normal) traffic*/ - AR5K_WME_AC_VI, /*Video traffic*/ - AR5K_WME_AC_VO, /*Voice traffic*/ + AR5K_WME_AC_BK = 0, + AR5K_WME_AC_BE, + AR5K_WME_AC_VI, + AR5K_WME_AC_VO, }; -/* - * Queue ID numbers as returned by the hw functions, each number - * represents a hw queue. If hw does not support hw queues - * (eg 5210) all data goes in one queue. These match - * d80211 definitions (net80211/MadWiFi don't use them). +/** + * enum ath5k_tx_queue_id - Queue ID numbers as returned by the hw functions + * @AR5K_TX_QUEUE_ID_NOQCU_DATA: Data queue on AR5210 (no QCU available) + * @AR5K_TX_QUEUE_ID_NOQCU_BEACON: Beacon queue on AR5210 (no QCU available) + * @AR5K_TX_QUEUE_ID_DATA_MIN: Data queue min index + * @AR5K_TX_QUEUE_ID_DATA_MAX: Data queue max index + * @AR5K_TX_QUEUE_ID_CAB: Content after beacon queue + * @AR5K_TX_QUEUE_ID_BEACON: Beacon queue + * @AR5K_TX_QUEUE_ID_UAPSD: Urgent Automatic Power Save Delivery, + * + * Each number represents a hw queue. If hw does not support hw queues + * (eg 5210) all data goes in one queue. */ enum ath5k_tx_queue_id { AR5K_TX_QUEUE_ID_NOQCU_DATA = 0, AR5K_TX_QUEUE_ID_NOQCU_BEACON = 1, - AR5K_TX_QUEUE_ID_DATA_MIN = 0, /*IEEE80211_TX_QUEUE_DATA0*/ - AR5K_TX_QUEUE_ID_DATA_MAX = 3, /*IEEE80211_TX_QUEUE_DATA3*/ - AR5K_TX_QUEUE_ID_DATA_SVP = 5, /*IEEE80211_TX_QUEUE_SVP - Spectralink Voice Protocol*/ - AR5K_TX_QUEUE_ID_CAB = 6, /*IEEE80211_TX_QUEUE_AFTER_BEACON*/ - AR5K_TX_QUEUE_ID_BEACON = 7, /*IEEE80211_TX_QUEUE_BEACON*/ - AR5K_TX_QUEUE_ID_UAPSD = 8, - AR5K_TX_QUEUE_ID_XR_DATA = 9, + AR5K_TX_QUEUE_ID_DATA_MIN = 0, + AR5K_TX_QUEUE_ID_DATA_MAX = 3, + AR5K_TX_QUEUE_ID_UAPSD = 7, + AR5K_TX_QUEUE_ID_CAB = 8, + AR5K_TX_QUEUE_ID_BEACON = 9, }; /* @@ -521,46 +607,70 @@ enum ath5k_tx_queue_id { #define AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS 0x1000 /* Disable backoff while bursting */ #define AR5K_TXQ_FLAG_COMPRESSION_ENABLE 0x2000 /* Enable hw compression -not implemented-*/ -/* - * Data transmit queue state. One of these exists for each - * hardware transmit queue. Packets sent to us from above - * are assigned to queues based on their priority. Not all - * devices support a complete set of hardware transmit queues. - * For those devices the array sc_ac2q will map multiple - * priorities to fewer hardware queues (typically all to one - * hardware queue). +/** + * struct ath5k_txq - Transmit queue state + * @qnum: Hardware q number + * @link: Link ptr in last TX desc + * @q: Transmit queue (&struct list_head) + * @lock: Lock on q and link + * @setup: Is the queue configured + * @txq_len:Number of queued buffers + * @txq_max: Max allowed num of queued buffers + * @txq_poll_mark: Used to check if queue got stuck + * @txq_stuck: Queue stuck counter + * + * One of these exists for each hardware transmit queue. + * Packets sent to us from above are assigned to queues based + * on their priority. Not all devices support a complete set + * of hardware transmit queues. For those devices the array + * sc_ac2q will map multiple priorities to fewer hardware queues + * (typically all to one hardware queue). */ struct ath5k_txq { - unsigned int qnum; /* hardware q number */ - u32 *link; /* link ptr in last TX desc */ - struct list_head q; /* transmit queue */ - spinlock_t lock; /* lock on q and link */ + unsigned int qnum; + u32 *link; + struct list_head q; + spinlock_t lock; bool setup; - int txq_len; /* number of queued buffers */ - int txq_max; /* max allowed num of queued buffers */ + int txq_len; + int txq_max; bool txq_poll_mark; - unsigned int txq_stuck; /* informational counter */ + unsigned int txq_stuck; }; -/* - * A struct to hold tx queue's parameters +/** + * struct ath5k_txq_info - A struct to hold TX queue's parameters + * @tqi_type: One of enum ath5k_tx_queue + * @tqi_subtype: One of enum ath5k_tx_queue_subtype + * @tqi_flags: TX queue flags (see above) + * @tqi_aifs: Arbitrated Inter-frame Space + * @tqi_cw_min: Minimum Contention Window + * @tqi_cw_max: Maximum Contention Window + * @tqi_cbr_period: Constant bit rate period + * @tqi_ready_time: Time queue waits after an event when RDYTIME is enabled */ struct ath5k_txq_info { enum ath5k_tx_queue tqi_type; enum ath5k_tx_queue_subtype tqi_subtype; - u16 tqi_flags; /* Tx queue flags (see above) */ - u8 tqi_aifs; /* Arbitrated Interframe Space */ - u16 tqi_cw_min; /* Minimum Contention Window */ - u16 tqi_cw_max; /* Maximum Contention Window */ - u32 tqi_cbr_period; /* Constant bit rate period */ + u16 tqi_flags; + u8 tqi_aifs; + u16 tqi_cw_min; + u16 tqi_cw_max; + u32 tqi_cbr_period; u32 tqi_cbr_overflow_limit; u32 tqi_burst_time; - u32 tqi_ready_time; /* Time queue waits after an event */ + u32 tqi_ready_time; }; -/* - * Transmit packet types. - * used on tx control descriptor +/** + * enum ath5k_pkt_type - Transmit packet types + * @AR5K_PKT_TYPE_NORMAL: Normal data + * @AR5K_PKT_TYPE_ATIM: ATIM + * @AR5K_PKT_TYPE_PSPOLL: PS-Poll + * @AR5K_PKT_TYPE_BEACON: Beacon + * @AR5K_PKT_TYPE_PROBE_RESP: Probe response + * @AR5K_PKT_TYPE_PIFS: PIFS + * Used on tx control descriptor */ enum ath5k_pkt_type { AR5K_PKT_TYPE_NORMAL = 0, @@ -583,27 +693,23 @@ enum ath5k_pkt_type { (ah->ah_txpower.txp_rates_power_table[(_r)] & 0x3f) << (_v) \ ) -/* - * DMA size definitions (2^(n+2)) - */ -enum ath5k_dmasize { - AR5K_DMASIZE_4B = 0, - AR5K_DMASIZE_8B, - AR5K_DMASIZE_16B, - AR5K_DMASIZE_32B, - AR5K_DMASIZE_64B, - AR5K_DMASIZE_128B, - AR5K_DMASIZE_256B, - AR5K_DMASIZE_512B -}; /****************\ RX DEFINITIONS \****************/ -/* - * RX Status descriptor +/** + * struct ath5k_rx_status - RX Status descriptor + * @rs_datalen: Data length + * @rs_tstamp: Timestamp + * @rs_status: Status code + * @rs_phyerr: PHY error mask + * @rs_rssi: RSSI in 0.5dbm units + * @rs_keyix: Index to the key used for decrypting + * @rs_rate: Rate used to decode the frame + * @rs_antenna: Antenna used to receive the frame + * @rs_more: Indicates this is a frame fragment (Fast frames) */ struct ath5k_rx_status { u16 rs_datalen; @@ -645,10 +751,18 @@ struct ath5k_rx_status { #define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10) + /*******************************\ GAIN OPTIMIZATION DEFINITIONS \*******************************/ +/** + * enum ath5k_rfgain - RF Gain optimization engine state + * @AR5K_RFGAIN_INACTIVE: Engine disabled + * @AR5K_RFGAIN_ACTIVE: Probe active + * @AR5K_RFGAIN_READ_REQUESTED: Probe requested + * @AR5K_RFGAIN_NEED_CHANGE: Gain_F needs change + */ enum ath5k_rfgain { AR5K_RFGAIN_INACTIVE = 0, AR5K_RFGAIN_ACTIVE, @@ -656,6 +770,16 @@ enum ath5k_rfgain { AR5K_RFGAIN_NEED_CHANGE, }; +/** + * struct ath5k_gain - RF Gain optimization engine state data + * @g_step_idx: Current step index + * @g_current: Current gain + * @g_target: Target gain + * @g_low: Low gain boundary + * @g_high: High gain boundary + * @g_f_corr: Gain_F correction + * @g_state: One of enum ath5k_rfgain + */ struct ath5k_gain { u8 g_step_idx; u8 g_current; @@ -666,6 +790,8 @@ struct ath5k_gain { u8 g_state; }; + + /********************\ COMMON DEFINITIONS \********************/ @@ -674,9 +800,14 @@ struct ath5k_gain { #define AR5K_SLOT_TIME_20 880 #define AR5K_SLOT_TIME_MAX 0xffff -/* - * The following structure is used to map 2GHz channels to - * 5GHz Atheros channels. +/** + * struct ath5k_athchan_2ghz - 2GHz to 5GHZ map for RF5111 + * @a2_flags: Channel flags (internal) + * @a2_athchan: HW channel number (internal) + * + * This structure is used to map 2GHz channels to + * 5GHz Atheros channels on 2111 frequency converter + * that comes together with RF5111 * TODO: Clean up */ struct ath5k_athchan_2ghz { @@ -684,36 +815,80 @@ struct ath5k_athchan_2ghz { u16 a2_athchan; }; +/** + * enum ath5k_dmasize - DMA size definitions (2^(n+2)) + * @AR5K_DMASIZE_4B: 4Bytes + * @AR5K_DMASIZE_8B: 8Bytes + * @AR5K_DMASIZE_16B: 16Bytes + * @AR5K_DMASIZE_32B: 32Bytes + * @AR5K_DMASIZE_64B: 64Bytes (Default) + * @AR5K_DMASIZE_128B: 128Bytes + * @AR5K_DMASIZE_256B: 256Bytes + * @AR5K_DMASIZE_512B: 512Bytes + * + * These are used to set DMA burst size on hw + * + * Note: Some platforms can't handle more than 4Bytes + * be careful on embedded boards. + */ +enum ath5k_dmasize { + AR5K_DMASIZE_4B = 0, + AR5K_DMASIZE_8B, + AR5K_DMASIZE_16B, + AR5K_DMASIZE_32B, + AR5K_DMASIZE_64B, + AR5K_DMASIZE_128B, + AR5K_DMASIZE_256B, + AR5K_DMASIZE_512B +}; + + /******************\ RATE DEFINITIONS \******************/ /** + * DOC: Rate codes + * * Seems the ar5xxx hardware supports up to 32 rates, indexed by 1-32. * * The rate code is used to get the RX rate or set the TX rate on the * hardware descriptors. It is also used for internal modulation control * and settings. * - * This is the hardware rate map we are aware of: - * - * rate_code 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 - * rate_kbps 3000 1000 ? ? ? 2000 500 48000 - * - * rate_code 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F 0x10 - * rate_kbps 24000 12000 6000 54000 36000 18000 9000 ? - * - * rate_code 17 18 19 20 21 22 23 24 - * rate_kbps ? ? ? ? ? ? ? 11000 + * This is the hardware rate map we are aware of (html unfriendly): * - * rate_code 25 26 27 28 29 30 31 32 - * rate_kbps 5500 2000 1000 11000S 5500S 2000S ? ? + * Rate code Rate (Kbps) + * --------- ----------- + * 0x01 3000 (XR) + * 0x02 1000 (XR) + * 0x03 250 (XR) + * 0x04 - 05 -Reserved- + * 0x06 2000 (XR) + * 0x07 500 (XR) + * 0x08 48000 (OFDM) + * 0x09 24000 (OFDM) + * 0x0A 12000 (OFDM) + * 0x0B 6000 (OFDM) + * 0x0C 54000 (OFDM) + * 0x0D 36000 (OFDM) + * 0x0E 18000 (OFDM) + * 0x0F 9000 (OFDM) + * 0x10 - 17 -Reserved- + * 0x18 11000L (CCK) + * 0x19 5500L (CCK) + * 0x1A 2000L (CCK) + * 0x1B 1000L (CCK) + * 0x1C 11000S (CCK) + * 0x1D 5500S (CCK) + * 0x1E 2000S (CCK) + * 0x1F -Reserved- * - * "S" indicates CCK rates with short preamble. + * "S" indicates CCK rates with short preamble and "L" with long preamble. * * AR5211 has different rate codes for CCK (802.11B) rates. It only uses the - * lowest 4 bits, so they are the same as below with a 0xF mask. + * lowest 4 bits, so they are the same as above with a 0xF mask. * (0xB, 0xA, 0x9 and 0x8 for 1M, 2M, 5.5M and 11M). * We handle this in ath5k_setup_bands(). */ @@ -733,13 +908,9 @@ struct ath5k_athchan_2ghz { #define ATH5K_RATE_CODE_36M 0x0D #define ATH5K_RATE_CODE_48M 0x08 #define ATH5K_RATE_CODE_54M 0x0C -/* XR */ -#define ATH5K_RATE_CODE_XR_500K 0x07 -#define ATH5K_RATE_CODE_XR_1M 0x02 -#define ATH5K_RATE_CODE_XR_2M 0x06 -#define ATH5K_RATE_CODE_XR_3M 0x01 -/* adding this flag to rate_code enables short preamble */ +/* Adding this flag to rate_code on B rates + * enables short preamble */ #define AR5K_SET_SHORT_PREAMBLE 0x04 /* @@ -747,7 +918,7 @@ struct ath5k_athchan_2ghz { */ #define AR5K_KEYCACHE_SIZE 8 -extern int ath5k_modparam_nohwcrypt; +extern bool ath5k_modparam_nohwcrypt; /***********************\ HW RELATED DEFINITIONS @@ -769,49 +940,65 @@ extern int ath5k_modparam_nohwcrypt; /** * enum ath5k_int - Hardware interrupt masks helpers + * @AR5K_INT_RXOK: Frame successfully received + * @AR5K_INT_RXDESC: Request RX descriptor/Read RX descriptor + * @AR5K_INT_RXERR: Frame reception failed + * @AR5K_INT_RXNOFRM: No frame received within a specified time period + * @AR5K_INT_RXEOL: Reached "End Of List", means we need more RX descriptors + * @AR5K_INT_RXORN: Indicates we got RX FIFO overrun. Note that Rx overrun is + * not always fatal, on some chips we can continue operation + * without resetting the card, that's why %AR5K_INT_FATAL is not + * common for all chips. + * @AR5K_INT_RX_ALL: Mask to identify all RX related interrupts + * + * @AR5K_INT_TXOK: Frame transmission success + * @AR5K_INT_TXDESC: Request TX descriptor/Read TX status descriptor + * @AR5K_INT_TXERR: Frame transmission failure + * @AR5K_INT_TXEOL: Received End Of List for VEOL (Virtual End Of List). The + * Queue Control Unit (QCU) signals an EOL interrupt only if a + * descriptor's LinkPtr is NULL. For more details, refer to: + * "http://www.freepatentsonline.com/20030225739.html" + * @AR5K_INT_TXNOFRM: No frame was transmitted within a specified time period + * @AR5K_INT_TXURN: Indicates we got TX FIFO underrun. In such case we should + * increase the TX trigger threshold. + * @AR5K_INT_TX_ALL: Mask to identify all TX related interrupts * - * @AR5K_INT_RX: mask to identify received frame interrupts, of type - * AR5K_ISR_RXOK or AR5K_ISR_RXERR - * @AR5K_INT_RXDESC: Request RX descriptor/Read RX descriptor (?) - * @AR5K_INT_RXNOFRM: No frame received (?) - * @AR5K_INT_RXEOL: received End Of List for VEOL (Virtual End Of List). The - * Queue Control Unit (QCU) signals an EOL interrupt only if a descriptor's - * LinkPtr is NULL. For more details, refer to: - * http://www.freepatentsonline.com/20030225739.html - * @AR5K_INT_RXORN: Indicates we got RX overrun (eg. no more descriptors). - * Note that Rx overrun is not always fatal, on some chips we can continue - * operation without resetting the card, that's why int_fatal is not - * common for all chips. - * @AR5K_INT_TX: mask to identify received frame interrupts, of type - * AR5K_ISR_TXOK or AR5K_ISR_TXERR - * @AR5K_INT_TXDESC: Request TX descriptor/Read TX status descriptor (?) - * @AR5K_INT_TXURN: received when we should increase the TX trigger threshold - * We currently do increments on interrupt by - * (AR5K_TUNE_MAX_TX_FIFO_THRES - current_trigger_level) / 2 * @AR5K_INT_MIB: Indicates the either Management Information Base counters or - * one of the PHY error counters reached the maximum value and should be - * read and cleared. + * one of the PHY error counters reached the maximum value and + * should be read and cleared. + * @AR5K_INT_SWI: Software triggered interrupt. * @AR5K_INT_RXPHY: RX PHY Error * @AR5K_INT_RXKCM: RX Key cache miss * @AR5K_INT_SWBA: SoftWare Beacon Alert - indicates its time to send a - * beacon that must be handled in software. The alternative is if you - * have VEOL support, in that case you let the hardware deal with things. + * beacon that must be handled in software. The alternative is if + * you have VEOL support, in that case you let the hardware deal + * with things. + * @AR5K_INT_BRSSI: Beacon received with an RSSI value below our threshold * @AR5K_INT_BMISS: If in STA mode this indicates we have stopped seeing - * beacons from the AP have associated with, we should probably try to - * reassociate. When in IBSS mode this might mean we have not received - * any beacons from any local stations. Note that every station in an - * IBSS schedules to send beacons at the Target Beacon Transmission Time - * (TBTT) with a random backoff. - * @AR5K_INT_BNR: Beacon Not Ready interrupt - ?? - * @AR5K_INT_GPIO: GPIO interrupt is used for RF Kill, disabled for now - * until properly handled - * @AR5K_INT_FATAL: Fatal errors were encountered, typically caused by DMA - * errors. These types of errors we can enable seem to be of type - * AR5K_SIMR2_MCABT, AR5K_SIMR2_SSERR and AR5K_SIMR2_DPERR. + * beacons from the AP have associated with, we should probably + * try to reassociate. When in IBSS mode this might mean we have + * not received any beacons from any local stations. Note that + * every station in an IBSS schedules to send beacons at the + * Target Beacon Transmission Time (TBTT) with a random backoff. + * @AR5K_INT_BNR: Beacon queue got triggered (DMA beacon alert) while empty. + * @AR5K_INT_TIM: Beacon with local station's TIM bit set + * @AR5K_INT_DTIM: Beacon with DTIM bit and zero DTIM count received + * @AR5K_INT_DTIM_SYNC: DTIM sync lost + * @AR5K_INT_GPIO: GPIO interrupt is used for RF Kill switches connected to + * our GPIO pins. + * @AR5K_INT_BCN_TIMEOUT: Beacon timeout, we waited after TBTT but got noting + * @AR5K_INT_CAB_TIMEOUT: We waited for CAB traffic after the beacon but got + * nothing or an incomplete CAB frame sequence. + * @AR5K_INT_QCBRORN: A queue got it's CBR counter expired + * @AR5K_INT_QCBRURN: A queue got triggered wile empty + * @AR5K_INT_QTRIG: A queue got triggered + * + * @AR5K_INT_FATAL: Fatal errors were encountered, typically caused by bus/DMA + * errors. Indicates we need to reset the card. * @AR5K_INT_GLOBAL: Used to clear and set the IER - * @AR5K_INT_NOCARD: signals the card has been removed - * @AR5K_INT_COMMON: common interrupts shared among MACs with the same - * bit value + * @AR5K_INT_NOCARD: Signals the card has been removed + * @AR5K_INT_COMMON: Common interrupts shared among MACs with the same + * bit value * * These are mapped to take advantage of some common bits * between the MACs, to be able to set intr properties @@ -847,15 +1034,15 @@ enum ath5k_int { AR5K_INT_GPIO = 0x01000000, AR5K_INT_BCN_TIMEOUT = 0x02000000, /* Non common */ AR5K_INT_CAB_TIMEOUT = 0x04000000, /* Non common */ - AR5K_INT_RX_DOPPLER = 0x08000000, /* Non common */ - AR5K_INT_QCBRORN = 0x10000000, /* Non common */ - AR5K_INT_QCBRURN = 0x20000000, /* Non common */ - AR5K_INT_QTRIG = 0x40000000, /* Non common */ + AR5K_INT_QCBRORN = 0x08000000, /* Non common */ + AR5K_INT_QCBRURN = 0x10000000, /* Non common */ + AR5K_INT_QTRIG = 0x20000000, /* Non common */ AR5K_INT_GLOBAL = 0x80000000, AR5K_INT_TX_ALL = AR5K_INT_TXOK | AR5K_INT_TXDESC | AR5K_INT_TXERR + | AR5K_INT_TXNOFRM | AR5K_INT_TXEOL | AR5K_INT_TXURN, @@ -891,15 +1078,32 @@ enum ath5k_int { AR5K_INT_NOCARD = 0xffffffff }; -/* mask which calibration is active at the moment */ +/** + * enum ath5k_calibration_mask - Mask which calibration is active at the moment + * @AR5K_CALIBRATION_FULL: Full calibration (AGC + SHORT) + * @AR5K_CALIBRATION_SHORT: Short calibration (NF + I/Q) + * @AR5K_CALIBRATION_NF: Noise Floor calibration + * @AR5K_CALIBRATION_ANI: Adaptive Noise Immunity + */ enum ath5k_calibration_mask { AR5K_CALIBRATION_FULL = 0x01, AR5K_CALIBRATION_SHORT = 0x02, - AR5K_CALIBRATION_ANI = 0x04, + AR5K_CALIBRATION_NF = 0x04, + AR5K_CALIBRATION_ANI = 0x08, }; -/* - * Power management +/** + * enum ath5k_power_mode - Power management modes + * @AR5K_PM_UNDEFINED: Undefined + * @AR5K_PM_AUTO: Allow card to sleep if possible + * @AR5K_PM_AWAKE: Force card to wake up + * @AR5K_PM_FULL_SLEEP: Force card to full sleep (DANGEROUS) + * @AR5K_PM_NETWORK_SLEEP: Allow to sleep for a specified duration + * + * Currently only PM_AWAKE is used, FULL_SLEEP and NETWORK_SLEEP/AUTO + * are also known to have problems on some cards. This is not a big + * problem though because we can have almost the same effect as + * FULL_SLEEP by putting card on warm reset (it's almost powered down). */ enum ath5k_power_mode { AR5K_PM_UNDEFINED = 0, @@ -957,6 +1161,8 @@ struct ath5k_capabilities { } cap_queues; bool cap_has_phyerr_counters; + bool cap_has_mrr_support; + bool cap_needs_2GHz_ovr; }; /* size of noise floor history (keep it a power of two) */ @@ -1072,13 +1278,11 @@ struct ath5k_hw { dma_addr_t desc_daddr; /* DMA (physical) address */ size_t desc_len; /* size of TX/RX descriptors */ - DECLARE_BITMAP(status, 6); + DECLARE_BITMAP(status, 4); #define ATH_STAT_INVALID 0 /* disable hardware accesses */ -#define ATH_STAT_MRRETRY 1 /* multi-rate retry support */ -#define ATH_STAT_PROMISC 2 -#define ATH_STAT_LEDSOFT 3 /* enable LED gpio status */ -#define ATH_STAT_STARTED 4 /* opened & irqs enabled */ -#define ATH_STAT_2G_DISABLED 5 /* multiband radio without 2G */ +#define ATH_STAT_PROMISC 1 +#define ATH_STAT_LEDSOFT 2 /* enable LED gpio status */ +#define ATH_STAT_STARTED 3 /* opened & irqs enabled */ unsigned int filter_flags; /* HW flags, AR5K_RX_FILTER_* */ struct ieee80211_channel *curchan; /* current h/w channel */ @@ -1097,6 +1301,7 @@ struct ath5k_hw { led_on; /* pin setting for LED on */ struct work_struct reset_work; /* deferred chip reset */ + struct work_struct calib_work; /* deferred phy calibration */ struct list_head rxbuf; /* receive buffer */ spinlock_t rxbuflock; @@ -1113,14 +1318,13 @@ struct ath5k_hw { struct ath5k_rfkill rf_kill; - struct tasklet_struct calib; /* calibration tasklet */ - spinlock_t block; /* protects beacon */ struct tasklet_struct beacontq; /* beacon intr tasklet */ struct list_head bcbuf; /* beacon buffer */ struct ieee80211_vif *bslot[ATH_BCBUF]; u16 num_ap_vifs; u16 num_adhoc_vifs; + u16 num_mesh_vifs; unsigned int bhalq, /* SW q for outgoing beacons */ bmisscount, /* missed beacon transmits */ bintval, /* beacon interval in TU */ @@ -1128,7 +1332,6 @@ struct ath5k_hw { unsigned int nexttbtt; /* next beacon time in TU */ struct ath5k_txq *cabq; /* content after beacon */ - int power_level; /* Requested tx power in dBm */ bool assoc; /* associate state */ bool enable_beacon; /* true if beacons are on */ @@ -1144,7 +1347,7 @@ struct ath5k_hw { enum ath5k_int ah_imr; struct ieee80211_channel *ah_current_channel; - bool ah_calibration; + bool ah_iq_cal_needed; bool ah_single_chip; enum ath5k_version ah_version; @@ -1187,7 +1390,13 @@ struct ath5k_hw { u32 ah_txq_imr_cbrurn; u32 ah_txq_imr_qtrig; u32 ah_txq_imr_nofrm; - u32 ah_txq_isr; + + u32 ah_txq_isr_txok_all; + u32 ah_txq_isr_txurn; + u32 ah_txq_isr_qcborn; + u32 ah_txq_isr_qcburn; + u32 ah_txq_isr_qtrig; + u32 *ah_rf_banks; size_t ah_rf_banks_size; size_t ah_rf_regs_count; @@ -1216,6 +1425,7 @@ struct ath5k_hw { /* Value in dB units */ s16 txp_cck_ofdm_pwr_delta; bool txp_setup; + int txp_requested; /* Requested tx power in dBm */ } ah_txpower; struct ath5k_nfcal_hist ah_nfcal_hist; @@ -1228,8 +1438,8 @@ struct ath5k_hw { /* Calibration timestamp */ unsigned long ah_cal_next_full; + unsigned long ah_cal_next_short; unsigned long ah_cal_next_ani; - unsigned long ah_cal_next_nf; /* Calibration mask */ u8 ah_cal_mask; @@ -1314,11 +1524,12 @@ int ath5k_hw_dma_stop(struct ath5k_hw *ah); /* EEPROM access functions */ int ath5k_eeprom_init(struct ath5k_hw *ah); void ath5k_eeprom_detach(struct ath5k_hw *ah); - +int ath5k_eeprom_mode_from_channel(struct ath5k_hw *ah, + struct ieee80211_channel *channel); /* Protocol Control Unit Functions */ /* Helpers */ -int ath5k_hw_get_frame_duration(struct ath5k_hw *ah, +int ath5k_hw_get_frame_duration(struct ath5k_hw *ah, enum ieee80211_band band, int len, struct ieee80211_rate *rate, bool shortpre); unsigned int ath5k_hw_get_default_slottime(struct ath5k_hw *ah); unsigned int ath5k_hw_get_default_sifs(struct ath5k_hw *ah); @@ -1338,11 +1549,11 @@ void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah); u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah); void ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64); void ath5k_hw_reset_tsf(struct ath5k_hw *ah); -void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval); +void ath5k_hw_init_beacon_timers(struct ath5k_hw *ah, u32 next_beacon, + u32 interval); bool ath5k_hw_check_beacon_timers(struct ath5k_hw *ah, int intval); /* Init function */ -void ath5k_hw_pcu_init(struct ath5k_hw *ah, enum nl80211_iftype op_mode, - u8 mode); +void ath5k_hw_pcu_init(struct ath5k_hw *ah, enum nl80211_iftype op_mode); /* Queue Control Unit, DFS Control Unit Functions */ int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, @@ -1451,12 +1662,12 @@ static inline void __iomem *ath5k_ahb_reg(struct ath5k_hw *ah, u16 reg) static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg) { - return __raw_readl(ath5k_ahb_reg(ah, reg)); + return ioread32(ath5k_ahb_reg(ah, reg)); } static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg) { - __raw_writel(val, ath5k_ahb_reg(ah, reg)); + iowrite32(val, ath5k_ahb_reg(ah, reg)); } #else diff --git a/drivers/net/wireless/ath/ath5k/attach.c b/drivers/net/wireless/ath/ath5k/attach.c index 91627dd2c26..7106547a14d 100644 --- a/drivers/net/wireless/ath/ath5k/attach.c +++ b/drivers/net/wireless/ath/ath5k/attach.c @@ -20,6 +20,8 @@ * Attach/Detach Functions and helpers * \*************************************/ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/pci.h> #include <linux/slab.h> #include "ath5k.h" @@ -27,8 +29,7 @@ #include "debug.h" /** - * ath5k_hw_post - Power On Self Test helper function - * + * ath5k_hw_post() - Power On Self Test helper function * @ah: The &struct ath5k_hw */ static int ath5k_hw_post(struct ath5k_hw *ah) @@ -92,8 +93,7 @@ static int ath5k_hw_post(struct ath5k_hw *ah) } /** - * ath5k_hw_init - Check if hw is supported and init the needed structs - * + * ath5k_hw_init() - Check if hw is supported and init the needed structs * @ah: The &struct ath5k_hw associated with the device * * Check if the device is supported, perform a POST and initialize the needed @@ -298,7 +298,7 @@ int ath5k_hw_init(struct ath5k_hw *ah) /* Reset SERDES to load new settings */ ath5k_hw_reg_write(ah, 0x00000000, AR5K_PCIE_SERDES_RESET); - mdelay(1); + usleep_range(1000, 1500); } /* Get misc capabilities */ @@ -308,11 +308,6 @@ int ath5k_hw_init(struct ath5k_hw *ah) goto err; } - if (test_bit(ATH_STAT_2G_DISABLED, ah->status)) { - __clear_bit(AR5K_MODE_11B, ah->ah_capabilities.cap_mode); - __clear_bit(AR5K_MODE_11G, ah->ah_capabilities.cap_mode); - } - /* Crypto settings */ common->keymax = (ah->ah_version == AR5K_AR5210 ? AR5K_KEYTABLE_SIZE_5210 : AR5K_KEYTABLE_SIZE_5211); @@ -349,8 +344,7 @@ err: } /** - * ath5k_hw_deinit - Free the ath5k_hw struct - * + * ath5k_hw_deinit() - Free the &struct ath5k_hw * @ah: The &struct ath5k_hw */ void ath5k_hw_deinit(struct ath5k_hw *ah) diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index b346d049200..4b18434ba69 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -40,6 +40,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/delay.h> #include <linux/dma-mapping.h> @@ -54,10 +56,12 @@ #include <linux/etherdevice.h> #include <linux/nl80211.h> +#include <net/cfg80211.h> #include <net/ieee80211_radiotap.h> #include <asm/unaligned.h> +#include <net/mac80211.h> #include "base.h" #include "reg.h" #include "debug.h" @@ -68,18 +72,19 @@ #define CREATE_TRACE_POINTS #include "trace.h" -int ath5k_modparam_nohwcrypt; +bool ath5k_modparam_nohwcrypt; module_param_named(nohwcrypt, ath5k_modparam_nohwcrypt, bool, S_IRUGO); MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); -static int modparam_all_channels; -module_param_named(all_channels, modparam_all_channels, bool, S_IRUGO); -MODULE_PARM_DESC(all_channels, "Expose all channels the device can use."); - -static int modparam_fastchanswitch; +static bool modparam_fastchanswitch; module_param_named(fastchanswitch, modparam_fastchanswitch, bool, S_IRUGO); MODULE_PARM_DESC(fastchanswitch, "Enable fast channel switching for AR2413/AR5413 radios."); +static bool ath5k_modparam_no_hw_rfkill_switch; +module_param_named(no_hw_rfkill_switch, ath5k_modparam_no_hw_rfkill_switch, + bool, S_IRUGO); +MODULE_PARM_DESC(no_hw_rfkill_switch, "Ignore the GPIO RFKill switch state"); + /* Module info */ MODULE_AUTHOR("Jiri Slaby"); @@ -161,29 +166,36 @@ static const struct ieee80211_rate ath5k_rates[] = { .flags = IEEE80211_RATE_SHORT_PREAMBLE }, { .bitrate = 60, .hw_value = ATH5K_RATE_CODE_6M, - .flags = 0 }, + .flags = IEEE80211_RATE_SUPPORTS_5MHZ | + IEEE80211_RATE_SUPPORTS_10MHZ }, { .bitrate = 90, .hw_value = ATH5K_RATE_CODE_9M, - .flags = 0 }, + .flags = IEEE80211_RATE_SUPPORTS_5MHZ | + IEEE80211_RATE_SUPPORTS_10MHZ }, { .bitrate = 120, .hw_value = ATH5K_RATE_CODE_12M, - .flags = 0 }, + .flags = IEEE80211_RATE_SUPPORTS_5MHZ | + IEEE80211_RATE_SUPPORTS_10MHZ }, { .bitrate = 180, .hw_value = ATH5K_RATE_CODE_18M, - .flags = 0 }, + .flags = IEEE80211_RATE_SUPPORTS_5MHZ | + IEEE80211_RATE_SUPPORTS_10MHZ }, { .bitrate = 240, .hw_value = ATH5K_RATE_CODE_24M, - .flags = 0 }, + .flags = IEEE80211_RATE_SUPPORTS_5MHZ | + IEEE80211_RATE_SUPPORTS_10MHZ }, { .bitrate = 360, .hw_value = ATH5K_RATE_CODE_36M, - .flags = 0 }, + .flags = IEEE80211_RATE_SUPPORTS_5MHZ | + IEEE80211_RATE_SUPPORTS_10MHZ }, { .bitrate = 480, .hw_value = ATH5K_RATE_CODE_48M, - .flags = 0 }, + .flags = IEEE80211_RATE_SUPPORTS_5MHZ | + IEEE80211_RATE_SUPPORTS_10MHZ }, { .bitrate = 540, .hw_value = ATH5K_RATE_CODE_54M, - .flags = 0 }, - /* XR missing */ + .flags = IEEE80211_RATE_SUPPORTS_5MHZ | + IEEE80211_RATE_SUPPORTS_10MHZ }, }; static inline u64 ath5k_extend_tsf(struct ath5k_hw *ah, u32 rstamp) @@ -238,13 +250,14 @@ static const struct ath_ops ath5k_common_ops = { * Driver Initialization * \***********************/ -static int ath5k_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request) +static void ath5k_reg_notifier(struct wiphy *wiphy, + struct regulatory_request *request) { struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy); struct ath5k_hw *ah = hw->priv; struct ath_regulatory *regulatory = ath5k_hw_regulatory(ah); - return ath_reg_notifier_apply(wiphy, request, regulatory); + ath_reg_notifier_apply(wiphy, request, regulatory); } /********************\ @@ -252,8 +265,15 @@ static int ath5k_reg_notifier(struct wiphy *wiphy, struct regulatory_request *re \********************/ /* - * Returns true for the channel numbers used without all_channels modparam. + * Returns true for the channel numbers used. */ +#ifdef CONFIG_ATH5K_TEST_CHANNELS +static bool ath5k_is_standard_channel(short chan, enum ieee80211_band band) +{ + return true; +} + +#else static bool ath5k_is_standard_channel(short chan, enum ieee80211_band band) { if (band == IEEE80211_BAND_2GHZ && chan <= 14) @@ -270,6 +290,7 @@ static bool ath5k_is_standard_channel(short chan, enum ieee80211_band band) /* 802.11j 4.9GHz (20MHz) */ (chan == 184 || chan == 188 || chan == 192 || chan == 196)); } +#endif static unsigned int ath5k_setup_channels(struct ath5k_hw *ah, struct ieee80211_channel *channels, @@ -310,8 +331,7 @@ ath5k_setup_channels(struct ath5k_hw *ah, struct ieee80211_channel *channels, if (!ath5k_channel_ok(ah, &channels[count])) continue; - if (!modparam_all_channels && - !ath5k_is_standard_channel(ch, band)) + if (!ath5k_is_standard_channel(ch, band)) continue; count++; @@ -424,11 +444,27 @@ ath5k_setup_bands(struct ieee80211_hw *hw) * Called with ah->lock. */ int -ath5k_chan_set(struct ath5k_hw *ah, struct ieee80211_channel *chan) +ath5k_chan_set(struct ath5k_hw *ah, struct cfg80211_chan_def *chandef) { ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "channel set, resetting (%u -> %u MHz)\n", - ah->curchan->center_freq, chan->center_freq); + ah->curchan->center_freq, chandef->chan->center_freq); + + switch (chandef->width) { + case NL80211_CHAN_WIDTH_20: + case NL80211_CHAN_WIDTH_20_NOHT: + ah->ah_bwmode = AR5K_BWMODE_DEFAULT; + break; + case NL80211_CHAN_WIDTH_5: + ah->ah_bwmode = AR5K_BWMODE_5MHZ; + break; + case NL80211_CHAN_WIDTH_10: + ah->ah_bwmode = AR5K_BWMODE_10MHZ; + break; + default: + WARN_ON(1); + return -EINVAL; + } /* * To switch channels clear any pending DMA operations; @@ -436,7 +472,7 @@ ath5k_chan_set(struct ath5k_hw *ah, struct ieee80211_channel *chan) * hardware at the new frequency, and then re-enable * the relevant bits of the h/w. */ - return ath5k_reset(ah, chan, true); + return ath5k_reset(ah, chandef->chan, true); } void ath5k_vif_iter(void *data, u8 *mac, struct ieee80211_vif *vif) @@ -456,7 +492,7 @@ void ath5k_vif_iter(void *data, u8 *mac, struct ieee80211_vif *vif) } if (iter_data->need_set_hw_addr && iter_data->hw_macaddr) - if (compare_ether_addr(iter_data->hw_macaddr, mac) == 0) + if (ether_addr_equal(iter_data->hw_macaddr, mac)) iter_data->need_set_hw_addr = false; if (!iter_data->any_assoc) { @@ -502,8 +538,9 @@ ath5k_update_bssid_mask_and_opmode(struct ath5k_hw *ah, ath5k_vif_iter(&iter_data, vif->addr, vif); /* Get list of all active MAC addresses */ - ieee80211_iterate_active_interfaces_atomic(ah->hw, ath5k_vif_iter, - &iter_data); + ieee80211_iterate_active_interfaces_atomic( + ah->hw, IEEE80211_IFACE_ITER_RESUME_ALL, + ath5k_vif_iter, &iter_data); memcpy(ah->bssidmask, iter_data.mask, ETH_ALEN); ah->opmode = iter_data.opmode; @@ -655,9 +692,46 @@ static enum ath5k_pkt_type get_hw_packet_type(struct sk_buff *skb) return htype; } +static struct ieee80211_rate * +ath5k_get_rate(const struct ieee80211_hw *hw, + const struct ieee80211_tx_info *info, + struct ath5k_buf *bf, int idx) +{ + /* + * convert a ieee80211_tx_rate RC-table entry to + * the respective ieee80211_rate struct + */ + if (bf->rates[idx].idx < 0) { + return NULL; + } + + return &hw->wiphy->bands[info->band]->bitrates[ bf->rates[idx].idx ]; +} + +static u16 +ath5k_get_rate_hw_value(const struct ieee80211_hw *hw, + const struct ieee80211_tx_info *info, + struct ath5k_buf *bf, int idx) +{ + struct ieee80211_rate *rate; + u16 hw_rate; + u8 rc_flags; + + rate = ath5k_get_rate(hw, info, bf, idx); + if (!rate) + return 0; + + rc_flags = bf->rates[idx].flags; + hw_rate = (rc_flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) ? + rate->hw_value_short : rate->hw_value; + + return hw_rate; +} + static int ath5k_txbuf_setup(struct ath5k_hw *ah, struct ath5k_buf *bf, - struct ath5k_txq *txq, int padsize) + struct ath5k_txq *txq, int padsize, + struct ieee80211_tx_control *control) { struct ath5k_desc *ds = bf->desc; struct sk_buff *skb = bf->skb; @@ -677,7 +751,14 @@ ath5k_txbuf_setup(struct ath5k_hw *ah, struct ath5k_buf *bf, bf->skbaddr = dma_map_single(ah->dev, skb->data, skb->len, DMA_TO_DEVICE); - rate = ieee80211_get_tx_rate(ah->hw, info); + if (dma_mapping_error(ah->dev, bf->skbaddr)) + return -ENOSPC; + + ieee80211_get_tx_rates(info->control.vif, (control) ? control->sta : NULL, skb, bf->rates, + ARRAY_SIZE(bf->rates)); + + rate = ath5k_get_rate(ah->hw, info, bf, 0); + if (!rate) { ret = -EINVAL; goto err_unmap; @@ -687,8 +768,8 @@ ath5k_txbuf_setup(struct ath5k_hw *ah, struct ath5k_buf *bf, flags |= AR5K_TXDESC_NOACK; rc_flags = info->control.rates[0].flags; - hw_rate = (rc_flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) ? - rate->hw_value_short : rate->hw_value; + + hw_rate = ath5k_get_rate_hw_value(ah->hw, info, bf, 0); pktlen = skb->len; @@ -711,31 +792,37 @@ ath5k_txbuf_setup(struct ath5k_hw *ah, struct ath5k_buf *bf, duration = le16_to_cpu(ieee80211_ctstoself_duration(ah->hw, info->control.vif, pktlen, info)); } + ret = ah->ah_setup_tx_desc(ah, ds, pktlen, ieee80211_get_hdrlen_from_skb(skb), padsize, get_hw_packet_type(skb), - (ah->power_level * 2), + (ah->ah_txpower.txp_requested * 2), hw_rate, - info->control.rates[0].count, keyidx, ah->ah_tx_ant, flags, + bf->rates[0].count, keyidx, ah->ah_tx_ant, flags, cts_rate, duration); if (ret) goto err_unmap; - memset(mrr_rate, 0, sizeof(mrr_rate)); - memset(mrr_tries, 0, sizeof(mrr_tries)); - for (i = 0; i < 3; i++) { - rate = ieee80211_get_alt_retry_rate(ah->hw, info, i); - if (!rate) - break; + /* Set up MRR descriptor */ + if (ah->ah_capabilities.cap_has_mrr_support) { + memset(mrr_rate, 0, sizeof(mrr_rate)); + memset(mrr_tries, 0, sizeof(mrr_tries)); - mrr_rate[i] = rate->hw_value; - mrr_tries[i] = info->control.rates[i + 1].count; - } + for (i = 0; i < 3; i++) { + + rate = ath5k_get_rate(ah->hw, info, bf, i); + if (!rate) + break; - ath5k_hw_setup_mrr_tx_desc(ah, ds, - mrr_rate[0], mrr_tries[0], - mrr_rate[1], mrr_tries[1], - mrr_rate[2], mrr_tries[2]); + mrr_rate[i] = ath5k_get_rate_hw_value(ah->hw, info, bf, i); + mrr_tries[i] = bf->rates[i].count; + } + + ath5k_hw_setup_mrr_tx_desc(ah, ds, + mrr_rate[0], mrr_tries[0], + mrr_rate[1], mrr_tries[1], + mrr_rate[2], mrr_tries[2]); + } ds->ds_link = 0; ds->ds_data = bf->skbaddr; @@ -836,7 +923,7 @@ ath5k_txbuf_free_skb(struct ath5k_hw *ah, struct ath5k_buf *bf) return; dma_unmap_single(ah->dev, bf->skbaddr, bf->skb->len, DMA_TO_DEVICE); - dev_kfree_skb_any(bf->skb); + ieee80211_free_txskb(ah->hw, bf->skb); bf->skb = NULL; bf->skbaddr = 0; bf->desc->ds_data = 0; @@ -1036,11 +1123,11 @@ ath5k_drain_tx_buffs(struct ath5k_hw *ah) ath5k_txbuf_free_skb(ah, bf); - spin_lock_bh(&ah->txbuflock); + spin_lock(&ah->txbuflock); list_move_tail(&bf->list, &ah->txbuf); ah->txbuf_len++; txq->txq_len--; - spin_unlock_bh(&ah->txbuflock); + spin_unlock(&ah->txbuflock); } txq->link = NULL; txq->txq_poll_mark = false; @@ -1154,14 +1241,11 @@ static void ath5k_check_ibss_tsf(struct ath5k_hw *ah, struct sk_buff *skb, struct ieee80211_rx_status *rxs) { - struct ath_common *common = ath5k_hw_common(ah); u64 tsf, bc_tstamp; u32 hw_tu; struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)skb->data; - if (ieee80211_is_beacon(mgmt->frame_control) && - le16_to_cpu(mgmt->u.beacon.capab_info) & WLAN_CAPABILITY_IBSS && - memcmp(mgmt->bssid, common->curbssid, ETH_ALEN) == 0) { + if (le16_to_cpu(mgmt->u.beacon.capab_info) & WLAN_CAPABILITY_IBSS) { /* * Received an IBSS beacon with the same BSSID. Hardware *must* * have updated the local TSF. We have to work around various @@ -1217,23 +1301,6 @@ ath5k_check_ibss_tsf(struct ath5k_hw *ah, struct sk_buff *skb, } } -static void -ath5k_update_beacon_rssi(struct ath5k_hw *ah, struct sk_buff *skb, int rssi) -{ - struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)skb->data; - struct ath_common *common = ath5k_hw_common(ah); - - /* only beacons from our BSSID */ - if (!ieee80211_is_beacon(mgmt->frame_control) || - memcmp(mgmt->bssid, common->curbssid, ETH_ALEN) != 0) - return; - - ewma_add(&ah->ah_beacon_rssi_avg, rssi); - - /* in IBSS mode we should keep RSSI statistics per neighbour */ - /* le16_to_cpu(mgmt->u.beacon.capab_info) & WLAN_CAPABILITY_IBSS */ -} - /* * Compute padding position. skb must contain an IEEE 802.11 frame */ @@ -1306,6 +1373,7 @@ ath5k_receive_frame(struct ath5k_hw *ah, struct sk_buff *skb, struct ath5k_rx_status *rs) { struct ieee80211_rx_status *rxs; + struct ath_common *common = ath5k_hw_common(ah); ath5k_remove_padding(skb); @@ -1323,20 +1391,9 @@ ath5k_receive_frame(struct ath5k_hw *ah, struct sk_buff *skb, * 15bit only. that means TSF extension has to be done within * 32768usec (about 32ms). it might be necessary to move this to * the interrupt handler, like it is done in madwifi. - * - * Unfortunately we don't know when the hardware takes the rx - * timestamp (beginning of phy frame, data frame, end of rx?). - * The only thing we know is that it is hardware specific... - * On AR5213 it seems the rx timestamp is at the end of the - * frame, but I'm not sure. - * - * NOTE: mac80211 defines mactime at the beginning of the first - * data symbol. Since we don't have any time references it's - * impossible to comply to that. This affects IBSS merge only - * right now, so it's not too bad... */ rxs->mactime = ath5k_extend_tsf(ah, rs->rs_tstamp); - rxs->flag |= RX_FLAG_MACTIME_MPDU; + rxs->flag |= RX_FLAG_MACTIME_END; rxs->freq = ah->curchan->center_freq; rxs->band = ah->curchan->band; @@ -1352,6 +1409,16 @@ ath5k_receive_frame(struct ath5k_hw *ah, struct sk_buff *skb, rxs->rate_idx = ath5k_hw_to_driver_rix(ah, rs->rs_rate); rxs->flag |= ath5k_rx_decrypted(ah, skb, rs); + switch (ah->ah_bwmode) { + case AR5K_BWMODE_5MHZ: + rxs->flag |= RX_FLAG_5MHZ; + break; + case AR5K_BWMODE_10MHZ: + rxs->flag |= RX_FLAG_10MHZ; + break; + default: + break; + } if (rxs->rate_idx >= 0 && rs->rs_rate == ah->sbands[ah->curchan->band].bitrates[rxs->rate_idx].hw_value_short) @@ -1359,11 +1426,13 @@ ath5k_receive_frame(struct ath5k_hw *ah, struct sk_buff *skb, trace_ath5k_rx(ah, skb); - ath5k_update_beacon_rssi(ah, skb, rs->rs_rssi); + if (ath_is_mybeacon(common, (struct ieee80211_hdr *)skb->data)) { + ewma_add(&ah->ah_beacon_rssi_avg, rs->rs_rssi); - /* check beacons in IBSS mode */ - if (ah->opmode == NL80211_IFTYPE_ADHOC) - ath5k_check_ibss_tsf(ah, skb, rxs); + /* check beacons in IBSS mode */ + if (ah->opmode == NL80211_IFTYPE_ADHOC) + ath5k_check_ibss_tsf(ah, skb, rxs); + } ieee80211_rx(ah->hw, skb); } @@ -1512,7 +1581,7 @@ unlock: void ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb, - struct ath5k_txq *txq) + struct ath5k_txq *txq, struct ieee80211_tx_control *control) { struct ath5k_hw *ah = hw->priv; struct ath5k_buf *bf; @@ -1552,7 +1621,7 @@ ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb, bf->skb = skb; - if (ath5k_txbuf_setup(ah, bf, txq, padsize)) { + if (ath5k_txbuf_setup(ah, bf, txq, padsize, control)) { bf->skb = NULL; spin_lock_irqsave(&ah->txbuflock, flags); list_add_tail(&bf->list, &ah->txbuf); @@ -1563,21 +1632,26 @@ ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb, return; drop_packet: - dev_kfree_skb_any(skb); + ieee80211_free_txskb(hw, skb); } static void ath5k_tx_frame_completed(struct ath5k_hw *ah, struct sk_buff *skb, - struct ath5k_txq *txq, struct ath5k_tx_status *ts) + struct ath5k_txq *txq, struct ath5k_tx_status *ts, + struct ath5k_buf *bf) { struct ieee80211_tx_info *info; u8 tries[3]; int i; + int size = 0; ah->stats.tx_all_count++; ah->stats.tx_bytes_count += skb->len; info = IEEE80211_SKB_CB(skb); + size = min_t(int, sizeof(info->status.rates), sizeof(bf->rates)); + memcpy(info->status.rates, bf->rates, size); + tries[0] = info->status.rates[0].count; tries[1] = info->status.rates[1].count; tries[2] = info->status.rates[2].count; @@ -1660,7 +1734,7 @@ ath5k_tx_processq(struct ath5k_hw *ah, struct ath5k_txq *txq) dma_unmap_single(ah->dev, bf->skbaddr, skb->len, DMA_TO_DEVICE); - ath5k_tx_frame_completed(ah, skb, txq, &ts); + ath5k_tx_frame_completed(ah, skb, txq, &ts, bf); } /* @@ -1689,7 +1763,7 @@ ath5k_tasklet_tx(unsigned long data) struct ath5k_hw *ah = (void *)data; for (i = 0; i < AR5K_NUM_TX_QUEUES; i++) - if (ah->txqs[i].setup && (ah->ah_txq_isr & BIT(i))) + if (ah->txqs[i].setup && (ah->ah_txq_isr_txok_all & BIT(i))) ath5k_tx_processq(ah, &ah->txqs[i]); ah->tx_pending = false; @@ -1766,7 +1840,8 @@ ath5k_beacon_setup(struct ath5k_hw *ah, struct ath5k_buf *bf) ds->ds_data = bf->skbaddr; ret = ah->ah_setup_tx_desc(ah, ds, skb->len, ieee80211_get_hdrlen_from_skb(skb), padsize, - AR5K_PKT_TYPE_BEACON, (ah->power_level * 2), + AR5K_PKT_TYPE_BEACON, + (ah->ah_txpower.txp_requested * 2), ieee80211_get_tx_rate(ah->hw, info)->hw_value, 1, AR5K_TXKEYIX_INVALID, antenna, flags, 0, 0); @@ -1791,7 +1866,7 @@ ath5k_beacon_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif) { int ret; struct ath5k_hw *ah = hw->priv; - struct ath5k_vif *avf = (void *)vif->drv_priv; + struct ath5k_vif *avf; struct sk_buff *skb; if (WARN_ON(!vif)) { @@ -1806,6 +1881,7 @@ ath5k_beacon_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif) goto out; } + avf = (void *)vif->drv_priv; ath5k_txbuf_free_skb(ah, avf->bbuf); avf->bbuf->skb = skb; ret = ath5k_beacon_setup(ah, avf->bbuf); @@ -1860,7 +1936,8 @@ ath5k_beacon_send(struct ath5k_hw *ah) ah->bmisscount = 0; } - if ((ah->opmode == NL80211_IFTYPE_AP && ah->num_ap_vifs > 1) || + if ((ah->opmode == NL80211_IFTYPE_AP && ah->num_ap_vifs + + ah->num_mesh_vifs > 1) || ah->opmode == NL80211_IFTYPE_MESH_POINT) { u64 tsf = ath5k_hw_get_tsf64(ah); u32 tsftu = TSF_TO_TU(tsf); @@ -1911,7 +1988,7 @@ ath5k_beacon_send(struct ath5k_hw *ah) skb = ieee80211_get_buffered_bc(ah->hw, vif); while (skb) { - ath5k_tx_queue(ah->hw, skb, ah->cabq); + ath5k_tx_queue(ah->hw, skb, ah->cabq, NULL); if (ah->cabq->txq_len >= ah->cabq->txq_max) break; @@ -1945,7 +2022,8 @@ ath5k_beacon_update_timers(struct ath5k_hw *ah, u64 bc_tsf) u64 hw_tsf; intval = ah->bintval & AR5K_BEACON_PERIOD; - if (ah->opmode == NL80211_IFTYPE_AP && ah->num_ap_vifs > 1) { + if (ah->opmode == NL80211_IFTYPE_AP && ah->num_ap_vifs + + ah->num_mesh_vifs > 1) { intval /= ATH_BCBUF; /* staggered multi-bss beacons */ if (intval < 15) ATH5K_WARN(ah, "intval %u is too low, min 15\n", @@ -2005,7 +2083,7 @@ ath5k_beacon_update_timers(struct ath5k_hw *ah, u64 bc_tsf) ah->nexttbtt = nexttbtt; intval |= AR5K_BEACON_ENA; - ath5k_hw_init_beacon(ah, nexttbtt, intval); + ath5k_hw_init_beacon_timers(ah, nexttbtt, intval); /* * debugging output last in order to preserve the time critical aspect @@ -2042,9 +2120,7 @@ ath5k_beacon_update_timers(struct ath5k_hw *ah, u64 bc_tsf) void ath5k_beacon_config(struct ath5k_hw *ah) { - unsigned long flags; - - spin_lock_irqsave(&ah->block, flags); + spin_lock_bh(&ah->block); ah->bmisscount = 0; ah->imask &= ~(AR5K_INT_BMISS | AR5K_INT_SWBA); @@ -2071,7 +2147,7 @@ ath5k_beacon_config(struct ath5k_hw *ah) ath5k_hw_set_imr(ah, ah->imask); mmiowb(); - spin_unlock_irqrestore(&ah->block, flags); + spin_unlock_bh(&ah->block); } static void ath5k_tasklet_beacon(unsigned long data) @@ -2112,16 +2188,29 @@ static void ath5k_intr_calibration_poll(struct ath5k_hw *ah) { if (time_is_before_eq_jiffies(ah->ah_cal_next_ani) && - !(ah->ah_cal_mask & AR5K_CALIBRATION_FULL)) { - /* run ANI only when full calibration is not active */ + !(ah->ah_cal_mask & AR5K_CALIBRATION_FULL) && + !(ah->ah_cal_mask & AR5K_CALIBRATION_SHORT)) { + + /* Run ANI only when calibration is not active */ + ah->ah_cal_next_ani = jiffies + msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_ANI); tasklet_schedule(&ah->ani_tasklet); - } else if (time_is_before_eq_jiffies(ah->ah_cal_next_full)) { - ah->ah_cal_next_full = jiffies + - msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_FULL); - tasklet_schedule(&ah->calib); + } else if (time_is_before_eq_jiffies(ah->ah_cal_next_short) && + !(ah->ah_cal_mask & AR5K_CALIBRATION_FULL) && + !(ah->ah_cal_mask & AR5K_CALIBRATION_SHORT)) { + + /* Run calibration only when another calibration + * is not running. + * + * Note: This is for both full/short calibration, + * if it's time for a full one, ath5k_calibrate_work will deal + * with it. */ + + ah->ah_cal_next_short = jiffies + + msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_SHORT); + ieee80211_queue_work(ah->hw, &ah->calib_work); } /* we could use SWI to generate enough interrupts to meet our * calibration interval requirements, if necessary: @@ -2149,69 +2238,110 @@ ath5k_intr(int irq, void *dev_id) enum ath5k_int status; unsigned int counter = 1000; + + /* + * If hw is not ready (or detached) and we get an + * interrupt, or if we have no interrupts pending + * (that means it's not for us) skip it. + * + * NOTE: Group 0/1 PCI interface registers are not + * supported on WiSOCs, so we can't check for pending + * interrupts (ISR belongs to another register group + * so we are ok). + */ if (unlikely(test_bit(ATH_STAT_INVALID, ah->status) || - ((ath5k_get_bus_type(ah) != ATH_AHB) && - !ath5k_hw_is_intr_pending(ah)))) + ((ath5k_get_bus_type(ah) != ATH_AHB) && + !ath5k_hw_is_intr_pending(ah)))) return IRQ_NONE; + /** Main loop **/ do { - ath5k_hw_get_isr(ah, &status); /* NB: clears IRQ too */ + ath5k_hw_get_isr(ah, &status); /* NB: clears IRQ too */ + ATH5K_DBG(ah, ATH5K_DEBUG_INTR, "status 0x%x/0x%x\n", status, ah->imask); + + /* + * Fatal hw error -> Log and reset + * + * Fatal errors are unrecoverable so we have to + * reset the card. These errors include bus and + * dma errors. + */ if (unlikely(status & AR5K_INT_FATAL)) { - /* - * Fatal errors are unrecoverable. - * Typically these are caused by DMA errors. - */ + ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "fatal int, resetting\n"); ieee80211_queue_work(ah->hw, &ah->reset_work); + + /* + * RX Overrun -> Count and reset if needed + * + * Receive buffers are full. Either the bus is busy or + * the CPU is not fast enough to process all received + * frames. + */ } else if (unlikely(status & AR5K_INT_RXORN)) { + /* - * Receive buffers are full. Either the bus is busy or - * the CPU is not fast enough to process all received - * frames. * Older chipsets need a reset to come out of this * condition, but we treat it as RX for newer chips. - * We don't know exactly which versions need a reset - + * We don't know exactly which versions need a reset * this guess is copied from the HAL. */ ah->stats.rxorn_intr++; + if (ah->ah_mac_srev < AR5K_SREV_AR5212) { ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "rx overrun, resetting\n"); ieee80211_queue_work(ah->hw, &ah->reset_work); } else ath5k_schedule_rx(ah); + } else { + + /* Software Beacon Alert -> Schedule beacon tasklet */ if (status & AR5K_INT_SWBA) tasklet_hi_schedule(&ah->beacontq); - if (status & AR5K_INT_RXEOL) { - /* - * NB: the hardware should re-read the link when - * RXE bit is written, but it doesn't work at - * least on older hardware revs. - */ + /* + * No more RX descriptors -> Just count + * + * NB: the hardware should re-read the link when + * RXE bit is written, but it doesn't work at + * least on older hardware revs. + */ + if (status & AR5K_INT_RXEOL) ah->stats.rxeol_intr++; - } - if (status & AR5K_INT_TXURN) { - /* bump tx trigger level */ + + + /* TX Underrun -> Bump tx trigger level */ + if (status & AR5K_INT_TXURN) ath5k_hw_update_tx_triglevel(ah, true); - } + + /* RX -> Schedule rx tasklet */ if (status & (AR5K_INT_RXOK | AR5K_INT_RXERR)) ath5k_schedule_rx(ah); - if (status & (AR5K_INT_TXOK | AR5K_INT_TXDESC - | AR5K_INT_TXERR | AR5K_INT_TXEOL)) + + /* TX -> Schedule tx tasklet */ + if (status & (AR5K_INT_TXOK + | AR5K_INT_TXDESC + | AR5K_INT_TXERR + | AR5K_INT_TXEOL)) ath5k_schedule_tx(ah); - if (status & AR5K_INT_BMISS) { - /* TODO */ - } + + /* Missed beacon -> TODO + if (status & AR5K_INT_BMISS) + */ + + /* MIB event -> Update counters and notify ANI */ if (status & AR5K_INT_MIB) { ah->stats.mib_intr++; ath5k_hw_update_mib_counters(ah); ath5k_ani_mib_intr(ah); } + + /* GPIO -> Notify RFKill layer */ if (status & AR5K_INT_GPIO) tasklet_schedule(&ah->rf_kill.toggleq); @@ -2222,12 +2352,19 @@ ath5k_intr(int irq, void *dev_id) } while (ath5k_hw_is_intr_pending(ah) && --counter > 0); + /* + * Until we handle rx/tx interrupts mask them on IMR + * + * NOTE: ah->(rx/tx)_pending are set when scheduling the tasklets + * and unset after we 've handled the interrupts. + */ if (ah->rx_pending || ah->tx_pending) ath5k_set_current_imask(ah); if (unlikely(!counter)) ATH5K_WARN(ah, "too many interrupts, giving up for now\n"); + /* Fire up calibration poll */ ath5k_intr_calibration_poll(ah); return IRQ_HANDLED; @@ -2238,41 +2375,48 @@ ath5k_intr(int irq, void *dev_id) * for temperature/environment changes. */ static void -ath5k_tasklet_calibrate(unsigned long data) +ath5k_calibrate_work(struct work_struct *work) { - struct ath5k_hw *ah = (void *)data; + struct ath5k_hw *ah = container_of(work, struct ath5k_hw, + calib_work); + + /* Should we run a full calibration ? */ + if (time_is_before_eq_jiffies(ah->ah_cal_next_full)) { + + ah->ah_cal_next_full = jiffies + + msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_FULL); + ah->ah_cal_mask |= AR5K_CALIBRATION_FULL; + + ATH5K_DBG(ah, ATH5K_DEBUG_CALIBRATE, + "running full calibration\n"); + + if (ath5k_hw_gainf_calibrate(ah) == AR5K_RFGAIN_NEED_CHANGE) { + /* + * Rfgain is out of bounds, reset the chip + * to load new gain values. + */ + ATH5K_DBG(ah, ATH5K_DEBUG_RESET, + "got new rfgain, resetting\n"); + ieee80211_queue_work(ah->hw, &ah->reset_work); + } + } else + ah->ah_cal_mask |= AR5K_CALIBRATION_SHORT; - /* Only full calibration for now */ - ah->ah_cal_mask |= AR5K_CALIBRATION_FULL; ATH5K_DBG(ah, ATH5K_DEBUG_CALIBRATE, "channel %u/%x\n", ieee80211_frequency_to_channel(ah->curchan->center_freq), ah->curchan->hw_value); - if (ath5k_hw_gainf_calibrate(ah) == AR5K_RFGAIN_NEED_CHANGE) { - /* - * Rfgain is out of bounds, reset the chip - * to load new gain values. - */ - ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "calibration, resetting\n"); - ieee80211_queue_work(ah->hw, &ah->reset_work); - } if (ath5k_hw_phy_calibrate(ah, ah->curchan)) ATH5K_ERR(ah, "calibration of channel %u failed\n", ieee80211_frequency_to_channel( ah->curchan->center_freq)); - /* Noise floor calibration interrupts rx/tx path while I/Q calibration - * doesn't. - * TODO: We should stop TX here, so that it doesn't interfere. - * Note that stopping the queues is not enough to stop TX! */ - if (time_is_before_eq_jiffies(ah->ah_cal_next_nf)) { - ah->ah_cal_next_nf = jiffies + - msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_NF); - ath5k_hw_update_noise_floor(ah); - } - - ah->ah_cal_mask &= ~AR5K_CALIBRATION_FULL; + /* Clear calibration flags */ + if (ah->ah_cal_mask & AR5K_CALIBRATION_FULL) + ah->ah_cal_mask &= ~AR5K_CALIBRATION_FULL; + else if (ah->ah_cal_mask & AR5K_CALIBRATION_SHORT) + ah->ah_cal_mask &= ~AR5K_CALIBRATION_SHORT; } @@ -2296,6 +2440,9 @@ ath5k_tx_complete_poll_work(struct work_struct *work) int i; bool needreset = false; + if (!test_bit(ATH_STAT_STARTED, ah->status)) + return; + mutex_lock(&ah->lock); for (i = 0; i < ARRAY_SIZE(ah->txqs); i++) { @@ -2336,7 +2483,23 @@ ath5k_tx_complete_poll_work(struct work_struct *work) * Initialization routines * \*************************/ -int __devinit +static const struct ieee80211_iface_limit if_limits[] = { + { .max = 2048, .types = BIT(NL80211_IFTYPE_STATION) }, + { .max = 4, .types = +#ifdef CONFIG_MAC80211_MESH + BIT(NL80211_IFTYPE_MESH_POINT) | +#endif + BIT(NL80211_IFTYPE_AP) }, +}; + +static const struct ieee80211_iface_combination if_comb = { + .limits = if_limits, + .n_limits = ARRAY_SIZE(if_limits), + .max_interfaces = 2048, + .num_different_channels = 1, +}; + +int ath5k_init_ah(struct ath5k_hw *ah, const struct ath_bus_ops *bus_ops) { struct ieee80211_hw *hw = ah->hw; @@ -2349,7 +2512,9 @@ ath5k_init_ah(struct ath5k_hw *ah, const struct ath_bus_ops *bus_ops) hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | IEEE80211_HW_SIGNAL_DBM | - IEEE80211_HW_REPORTS_TX_ACK_STATUS; + IEEE80211_HW_MFP_CAPABLE | + IEEE80211_HW_REPORTS_TX_ACK_STATUS | + IEEE80211_HW_SUPPORTS_RC_TABLE; hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_AP) | @@ -2357,12 +2522,19 @@ ath5k_init_ah(struct ath5k_hw *ah, const struct ath_bus_ops *bus_ops) BIT(NL80211_IFTYPE_ADHOC) | BIT(NL80211_IFTYPE_MESH_POINT); + hw->wiphy->iface_combinations = &if_comb; + hw->wiphy->n_iface_combinations = 1; + + /* SW support for IBSS_RSN is provided by mac80211 */ + hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN; + + hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_5_10_MHZ; + /* both antennas can be configured as RX or TX */ hw->wiphy->available_antennas_tx = 0x3; hw->wiphy->available_antennas_rx = 0x3; hw->extra_tx_headroom = 2; - hw->channel_change_time = 5000; /* * Mark the device as detached to avoid processing @@ -2407,8 +2579,8 @@ ath5k_init_ah(struct ath5k_hw *ah, const struct ath_bus_ops *bus_ops) if (ret) goto err_irq; - /* set up multi-rate retry capabilities */ - if (ah->ah_version == AR5K_AR5212) { + /* Set up multi-rate retry capabilities */ + if (ah->ah_capabilities.cap_has_mrr_support) { hw->max_rates = 4; hw->max_rate_tries = max(AR5K_INIT_RETRY_SHORT, AR5K_INIT_RETRY_LONG); @@ -2543,16 +2715,23 @@ int ath5k_start(struct ieee80211_hw *hw) * be followed by initialization of the appropriate bits * and then setup of the interrupt mask. */ - ah->curchan = ah->hw->conf.channel; - ah->imask = AR5K_INT_RXOK | AR5K_INT_RXERR | AR5K_INT_RXEOL | - AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL | - AR5K_INT_FATAL | AR5K_INT_GLOBAL | AR5K_INT_MIB; + ah->curchan = ah->hw->conf.chandef.chan; + ah->imask = AR5K_INT_RXOK + | AR5K_INT_RXERR + | AR5K_INT_RXEOL + | AR5K_INT_RXORN + | AR5K_INT_TXDESC + | AR5K_INT_TXEOL + | AR5K_INT_FATAL + | AR5K_INT_GLOBAL + | AR5K_INT_MIB; ret = ath5k_reset(ah, NULL, false); if (ret) goto done; - ath5k_rfkill_hw_start(ah); + if (!ath5k_modparam_no_hw_rfkill_switch) + ath5k_rfkill_hw_start(ah); /* * Reset the key cache since some parts do not reset the @@ -2573,6 +2752,7 @@ done: mmiowb(); mutex_unlock(&ah->lock); + set_bit(ATH_STAT_STARTED, ah->status); ieee80211_queue_delayed_work(ah->hw, &ah->tx_complete_work, msecs_to_jiffies(ATH5K_TX_COMPLETE_POLL_INT)); @@ -2585,7 +2765,6 @@ static void ath5k_stop_tasklets(struct ath5k_hw *ah) ah->tx_pending = false; tasklet_kill(&ah->rxtq); tasklet_kill(&ah->txtq); - tasklet_kill(&ah->calib); tasklet_kill(&ah->beacontq); tasklet_kill(&ah->ani_tasklet); } @@ -2635,9 +2814,11 @@ void ath5k_stop(struct ieee80211_hw *hw) ath5k_stop_tasklets(ah); + clear_bit(ATH_STAT_STARTED, ah->status); cancel_delayed_work_sync(&ah->tx_complete_work); - ath5k_rfkill_hw_stop(ah); + if (!ath5k_modparam_no_hw_rfkill_switch) + ath5k_rfkill_hw_stop(ah); } /* @@ -2689,9 +2870,24 @@ ath5k_reset(struct ath5k_hw *ah, struct ieee80211_channel *chan, ath5k_ani_init(ah, ani_mode); - ah->ah_cal_next_full = jiffies + msecs_to_jiffies(100); - ah->ah_cal_next_ani = jiffies; - ah->ah_cal_next_nf = jiffies; + /* + * Set calibration intervals + * + * Note: We don't need to run calibration imediately + * since some initial calibration is done on reset + * even for fast channel switching. Also on scanning + * this will get set again and again and it won't get + * executed unless we connect somewhere and spend some + * time on the channel (that's what calibration needs + * anyway to be accurate). + */ + ah->ah_cal_next_full = jiffies + + msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_FULL); + ah->ah_cal_next_ani = jiffies + + msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_ANI); + ah->ah_cal_next_short = jiffies + + msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_SHORT); + ewma_init(&ah->ah_beacon_rssi_avg, 1024, 8); /* clear survey data and cycle counters */ @@ -2733,7 +2929,7 @@ static void ath5k_reset_work(struct work_struct *work) mutex_unlock(&ah->lock); } -static int __devinit +static int ath5k_init(struct ieee80211_hw *hw) { @@ -2745,20 +2941,6 @@ ath5k_init(struct ieee80211_hw *hw) /* - * Check if the MAC has multi-rate retry support. - * We do this by trying to setup a fake extended - * descriptor. MACs that don't have support will - * return false w/o doing anything. MACs that do - * support it will return true w/o doing anything. - */ - ret = ath5k_hw_setup_mrr_tx_desc(ah, NULL, 0, 0, 0, 0, 0, 0); - - if (ret < 0) - goto err; - if (ret > 0) - __set_bit(ATH_STAT_MRRETRY, ah->status); - - /* * Collect the channel list. The 802.11 layer * is responsible for filtering this list based * on settings like the phy mode and regulatory @@ -2841,11 +3023,11 @@ ath5k_init(struct ieee80211_hw *hw) tasklet_init(&ah->rxtq, ath5k_tasklet_rx, (unsigned long)ah); tasklet_init(&ah->txtq, ath5k_tasklet_tx, (unsigned long)ah); - tasklet_init(&ah->calib, ath5k_tasklet_calibrate, (unsigned long)ah); tasklet_init(&ah->beacontq, ath5k_tasklet_beacon, (unsigned long)ah); tasklet_init(&ah->ani_tasklet, ath5k_tasklet_ani, (unsigned long)ah); INIT_WORK(&ah->reset_work, ath5k_reset_work); + INIT_WORK(&ah->calib_work, ath5k_calibrate_work); INIT_DELAYED_WORK(&ah->tx_complete_work, ath5k_tx_complete_poll_work); ret = ath5k_hw_common(ah)->bus_ops->eeprom_read_mac(ah, mac); @@ -2932,8 +3114,9 @@ ath5k_any_vif_assoc(struct ath5k_hw *ah) iter_data.need_set_hw_addr = false; iter_data.found_active = true; - ieee80211_iterate_active_interfaces_atomic(ah->hw, ath5k_vif_iter, - &iter_data); + ieee80211_iterate_active_interfaces_atomic( + ah->hw, IEEE80211_IFACE_ITER_RESUME_ALL, + ath5k_vif_iter, &iter_data); return iter_data.any_assoc; } @@ -2950,3 +3133,23 @@ ath5k_set_beacon_filter(struct ieee80211_hw *hw, bool enable) ath5k_hw_set_rx_filter(ah, rfilt); ah->filter_flags = rfilt; } + +void _ath5k_printk(const struct ath5k_hw *ah, const char *level, + const char *fmt, ...) +{ + struct va_format vaf; + va_list args; + + va_start(args, fmt); + + vaf.fmt = fmt; + vaf.va = &args; + + if (ah && ah->hw) + printk("%s" pr_fmt("%s: %pV"), + level, wiphy_name(ah->hw->wiphy), &vaf); + else + printk("%s" pr_fmt("%pV"), level, &vaf); + + va_end(args); +} diff --git a/drivers/net/wireless/ath/ath5k/base.h b/drivers/net/wireless/ath/ath5k/base.h index 6c94c7ff235..97469d0fbad 100644 --- a/drivers/net/wireless/ath/ath5k/base.h +++ b/drivers/net/wireless/ath/ath5k/base.h @@ -47,6 +47,7 @@ struct ath5k_hw; struct ath5k_txq; struct ieee80211_channel; struct ath_bus_ops; +struct ieee80211_tx_control; enum nl80211_iftype; enum ath5k_srev_type { @@ -61,11 +62,12 @@ struct ath5k_srev_name { }; struct ath5k_buf { - struct list_head list; - struct ath5k_desc *desc; /* virtual addr of desc */ - dma_addr_t daddr; /* physical addr of desc */ - struct sk_buff *skb; /* skbuff for buf */ - dma_addr_t skbaddr;/* physical addr of skb data */ + struct list_head list; + struct ath5k_desc *desc; /* virtual addr of desc */ + dma_addr_t daddr; /* physical addr of desc */ + struct sk_buff *skb; /* skbuff for buf */ + dma_addr_t skbaddr; /* physical addr of skb data */ + struct ieee80211_tx_rate rates[4]; /* number of multi-rate stages */ }; struct ath5k_vif { @@ -99,11 +101,11 @@ void ath5k_set_beacon_filter(struct ieee80211_hw *hw, bool enable); void ath5k_update_bssid_mask_and_opmode(struct ath5k_hw *ah, struct ieee80211_vif *vif); -int ath5k_chan_set(struct ath5k_hw *ah, struct ieee80211_channel *chan); +int ath5k_chan_set(struct ath5k_hw *ah, struct cfg80211_chan_def *chandef); void ath5k_txbuf_free_skb(struct ath5k_hw *ah, struct ath5k_buf *bf); void ath5k_rxbuf_free_skb(struct ath5k_hw *ah, struct ath5k_buf *bf); void ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb, - struct ath5k_txq *txq); + struct ath5k_txq *txq, struct ieee80211_tx_control *control); const char *ath5k_chip_name(enum ath5k_srev_type type, u_int16_t val); diff --git a/drivers/net/wireless/ath/ath5k/caps.c b/drivers/net/wireless/ath/ath5k/caps.c index 810fba96702..994169ad39c 100644 --- a/drivers/net/wireless/ath/ath5k/caps.c +++ b/drivers/net/wireless/ath/ath5k/caps.c @@ -85,12 +85,19 @@ int ath5k_hw_set_capabilities(struct ath5k_hw *ah) caps->cap_range.range_2ghz_min = 2412; caps->cap_range.range_2ghz_max = 2732; - if (AR5K_EEPROM_HDR_11B(ee_header)) - __set_bit(AR5K_MODE_11B, caps->cap_mode); - - if (AR5K_EEPROM_HDR_11G(ee_header) && - ah->ah_version != AR5K_AR5211) - __set_bit(AR5K_MODE_11G, caps->cap_mode); + /* Override 2GHz modes on SoCs that need it + * NOTE: cap_needs_2GHz_ovr gets set from + * ath_ahb_probe */ + if (!caps->cap_needs_2GHz_ovr) { + if (AR5K_EEPROM_HDR_11B(ee_header)) + __set_bit(AR5K_MODE_11B, + caps->cap_mode); + + if (AR5K_EEPROM_HDR_11G(ee_header) && + ah->ah_version != AR5K_AR5211) + __set_bit(AR5K_MODE_11G, + caps->cap_mode); + } } } @@ -103,12 +110,18 @@ int ath5k_hw_set_capabilities(struct ath5k_hw *ah) else caps->cap_queues.q_tx_num = AR5K_NUM_TX_QUEUES; - /* newer hardware has PHY error counters */ + /* Newer hardware has PHY error counters */ if (ah->ah_mac_srev >= AR5K_SREV_AR5213A) caps->cap_has_phyerr_counters = true; else caps->cap_has_phyerr_counters = false; + /* MACs since AR5212 have MRR support */ + if (ah->ah_version == AR5K_AR5212) + caps->cap_has_mrr_support = true; + else + caps->cap_has_mrr_support = false; + return 0; } diff --git a/drivers/net/wireless/ath/ath5k/debug.c b/drivers/net/wireless/ath/ath5k/debug.c index 8c5ce8b0c73..b8d031ae63c 100644 --- a/drivers/net/wireless/ath/ath5k/debug.c +++ b/drivers/net/wireless/ath/ath5k/debug.c @@ -57,6 +57,9 @@ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGES. */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/export.h> #include <linux/moduleparam.h> @@ -71,13 +74,6 @@ static unsigned int ath5k_debug; module_param_named(debug, ath5k_debug, uint, 0); -static int ath5k_debugfs_open(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} - - /* debugfs: registers */ struct reg { @@ -249,15 +245,17 @@ static ssize_t write_file_beacon(struct file *file, struct ath5k_hw *ah = file->private_data; char buf[20]; - if (copy_from_user(buf, userbuf, min(count, sizeof(buf)))) + count = min_t(size_t, count, sizeof(buf) - 1); + if (copy_from_user(buf, userbuf, count)) return -EFAULT; + buf[count] = '\0'; if (strncmp(buf, "disable", 7) == 0) { AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE); - printk(KERN_INFO "debugfs disable beacons\n"); + pr_info("debugfs disable beacons\n"); } else if (strncmp(buf, "enable", 6) == 0) { AR5K_REG_ENABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE); - printk(KERN_INFO "debugfs enable beacons\n"); + pr_info("debugfs enable beacons\n"); } return count; } @@ -265,7 +263,7 @@ static ssize_t write_file_beacon(struct file *file, static const struct file_operations fops_beacon = { .read = read_file_beacon, .write = write_file_beacon, - .open = ath5k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -285,7 +283,7 @@ static ssize_t write_file_reset(struct file *file, static const struct file_operations fops_reset = { .write = write_file_reset, - .open = ath5k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = noop_llseek, }; @@ -349,9 +347,11 @@ static ssize_t write_file_debug(struct file *file, unsigned int i; char buf[20]; - if (copy_from_user(buf, userbuf, min(count, sizeof(buf)))) + count = min_t(size_t, count, sizeof(buf) - 1); + if (copy_from_user(buf, userbuf, count)) return -EFAULT; + buf[count] = '\0'; for (i = 0; i < ARRAY_SIZE(dbg_info); i++) { if (strncmp(buf, dbg_info[i].name, strlen(dbg_info[i].name)) == 0) { @@ -365,7 +365,7 @@ static ssize_t write_file_debug(struct file *file, static const struct file_operations fops_debug = { .read = read_file_debug, .write = write_file_debug, - .open = ath5k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -452,24 +452,26 @@ static ssize_t write_file_antenna(struct file *file, unsigned int i; char buf[20]; - if (copy_from_user(buf, userbuf, min(count, sizeof(buf)))) + count = min_t(size_t, count, sizeof(buf) - 1); + if (copy_from_user(buf, userbuf, count)) return -EFAULT; + buf[count] = '\0'; if (strncmp(buf, "diversity", 9) == 0) { ath5k_hw_set_antenna_mode(ah, AR5K_ANTMODE_DEFAULT); - printk(KERN_INFO "ath5k debug: enable diversity\n"); + pr_info("debug: enable diversity\n"); } else if (strncmp(buf, "fixed-a", 7) == 0) { ath5k_hw_set_antenna_mode(ah, AR5K_ANTMODE_FIXED_A); - printk(KERN_INFO "ath5k debugfs: fixed antenna A\n"); + pr_info("debug: fixed antenna A\n"); } else if (strncmp(buf, "fixed-b", 7) == 0) { ath5k_hw_set_antenna_mode(ah, AR5K_ANTMODE_FIXED_B); - printk(KERN_INFO "ath5k debug: fixed antenna B\n"); + pr_info("debug: fixed antenna B\n"); } else if (strncmp(buf, "clear", 5) == 0) { for (i = 0; i < ARRAY_SIZE(ah->stats.antenna_rx); i++) { ah->stats.antenna_rx[i] = 0; ah->stats.antenna_tx[i] = 0; } - printk(KERN_INFO "ath5k debug: cleared antenna stats\n"); + pr_info("debug: cleared antenna stats\n"); } return count; } @@ -477,7 +479,7 @@ static ssize_t write_file_antenna(struct file *file, static const struct file_operations fops_antenna = { .read = read_file_antenna, .write = write_file_antenna, - .open = ath5k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -532,7 +534,7 @@ static ssize_t read_file_misc(struct file *file, char __user *user_buf, static const struct file_operations fops_misc = { .read = read_file_misc, - .open = ath5k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, }; @@ -623,9 +625,11 @@ static ssize_t write_file_frameerrors(struct file *file, struct ath5k_statistics *st = &ah->stats; char buf[20]; - if (copy_from_user(buf, userbuf, min(count, sizeof(buf)))) + count = min_t(size_t, count, sizeof(buf) - 1); + if (copy_from_user(buf, userbuf, count)) return -EFAULT; + buf[count] = '\0'; if (strncmp(buf, "clear", 5) == 0) { st->rxerr_crc = 0; st->rxerr_phy = 0; @@ -639,7 +643,7 @@ static ssize_t write_file_frameerrors(struct file *file, st->txerr_fifo = 0; st->txerr_filt = 0; st->tx_all_count = 0; - printk(KERN_INFO "ath5k debug: cleared frameerrors stats\n"); + pr_info("debug: cleared frameerrors stats\n"); } return count; } @@ -647,7 +651,7 @@ static ssize_t write_file_frameerrors(struct file *file, static const struct file_operations fops_frameerrors = { .read = read_file_frameerrors, .write = write_file_frameerrors, - .open = ath5k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -770,9 +774,11 @@ static ssize_t write_file_ani(struct file *file, struct ath5k_hw *ah = file->private_data; char buf[20]; - if (copy_from_user(buf, userbuf, min(count, sizeof(buf)))) + count = min_t(size_t, count, sizeof(buf) - 1); + if (copy_from_user(buf, userbuf, count)) return -EFAULT; + buf[count] = '\0'; if (strncmp(buf, "sens-low", 8) == 0) { ath5k_ani_init(ah, ATH5K_ANI_MODE_MANUAL_HIGH); } else if (strncmp(buf, "sens-high", 9) == 0) { @@ -810,7 +816,7 @@ static ssize_t write_file_ani(struct file *file, static const struct file_operations fops_ani = { .read = read_file_ani, .write = write_file_ani, - .open = ath5k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -866,9 +872,11 @@ static ssize_t write_file_queue(struct file *file, struct ath5k_hw *ah = file->private_data; char buf[20]; - if (copy_from_user(buf, userbuf, min(count, sizeof(buf)))) + count = min_t(size_t, count, sizeof(buf) - 1); + if (copy_from_user(buf, userbuf, count)) return -EFAULT; + buf[count] = '\0'; if (strncmp(buf, "start", 5) == 0) ieee80211_wake_queues(ah->hw); else if (strncmp(buf, "stop", 4) == 0) @@ -881,7 +889,7 @@ static ssize_t write_file_queue(struct file *file, static const struct file_operations fops_queue = { .read = read_file_queue, .write = write_file_queue, - .open = ath5k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; diff --git a/drivers/net/wireless/ath/ath5k/desc.c b/drivers/net/wireless/ath/ath5k/desc.c index 7e88dda8222..bd8d4392d68 100644 --- a/drivers/net/wireless/ath/ath5k/desc.c +++ b/drivers/net/wireless/ath/ath5k/desc.c @@ -21,25 +21,68 @@ Hardware Descriptor Functions \******************************/ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include "ath5k.h" #include "reg.h" #include "debug.h" +/** + * DOC: Hardware descriptor functions + * + * Here we handle the processing of the low-level hw descriptors + * that hw reads and writes via DMA for each TX and RX attempt (that means + * we can also have descriptors for failed TX/RX tries). We have two kind of + * descriptors for RX and TX, control descriptors tell the hw how to send or + * receive a packet where to read/write it from/to etc and status descriptors + * that contain information about how the packet was sent or received (errors + * included). + * + * Descriptor format is not exactly the same for each MAC chip version so we + * have function pointers on &struct ath5k_hw we initialize at runtime based on + * the chip used. + */ + + /************************\ * TX Control descriptors * \************************/ -/* - * Initialize the 2-word tx control descriptor on 5210/5211 +/** + * ath5k_hw_setup_2word_tx_desc() - Initialize a 2-word tx control descriptor + * @ah: The &struct ath5k_hw + * @desc: The &struct ath5k_desc + * @pkt_len: Frame length in bytes + * @hdr_len: Header length in bytes (only used on AR5210) + * @padsize: Any padding we've added to the frame length + * @type: One of enum ath5k_pkt_type + * @tx_power: Tx power in 0.5dB steps + * @tx_rate0: HW idx for transmission rate + * @tx_tries0: Max number of retransmissions + * @key_index: Index on key table to use for encryption + * @antenna_mode: Which antenna to use (0 for auto) + * @flags: One of AR5K_TXDESC_* flags (desc.h) + * @rtscts_rate: HW idx for RTS/CTS transmission rate + * @rtscts_duration: What to put on duration field on the header of RTS/CTS + * + * Internal function to initialize a 2-Word TX control descriptor + * found on AR5210 and AR5211 MACs chips. + * + * Returns 0 on success or -EINVAL on false input */ static int -ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, - unsigned int pkt_len, unsigned int hdr_len, int padsize, - enum ath5k_pkt_type type, - unsigned int tx_power, unsigned int tx_rate0, unsigned int tx_tries0, - unsigned int key_index, unsigned int antenna_mode, unsigned int flags, - unsigned int rtscts_rate, unsigned int rtscts_duration) +ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *ah, + struct ath5k_desc *desc, + unsigned int pkt_len, unsigned int hdr_len, + int padsize, + enum ath5k_pkt_type type, + unsigned int tx_power, + unsigned int tx_rate0, unsigned int tx_tries0, + unsigned int key_index, + unsigned int antenna_mode, + unsigned int flags, + unsigned int rtscts_rate, unsigned int rtscts_duration) { u32 frame_type; struct ath5k_hw_2w_tx_ctl *tx_ctl; @@ -172,17 +215,40 @@ ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, return 0; } -/* - * Initialize the 4-word tx control descriptor on 5212 +/** + * ath5k_hw_setup_4word_tx_desc() - Initialize a 4-word tx control descriptor + * @ah: The &struct ath5k_hw + * @desc: The &struct ath5k_desc + * @pkt_len: Frame length in bytes + * @hdr_len: Header length in bytes (only used on AR5210) + * @padsize: Any padding we've added to the frame length + * @type: One of enum ath5k_pkt_type + * @tx_power: Tx power in 0.5dB steps + * @tx_rate0: HW idx for transmission rate + * @tx_tries0: Max number of retransmissions + * @key_index: Index on key table to use for encryption + * @antenna_mode: Which antenna to use (0 for auto) + * @flags: One of AR5K_TXDESC_* flags (desc.h) + * @rtscts_rate: HW idx for RTS/CTS transmission rate + * @rtscts_duration: What to put on duration field on the header of RTS/CTS + * + * Internal function to initialize a 4-Word TX control descriptor + * found on AR5212 and later MACs chips. + * + * Returns 0 on success or -EINVAL on false input */ -static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah, - struct ath5k_desc *desc, unsigned int pkt_len, unsigned int hdr_len, - int padsize, - enum ath5k_pkt_type type, unsigned int tx_power, unsigned int tx_rate0, - unsigned int tx_tries0, unsigned int key_index, - unsigned int antenna_mode, unsigned int flags, - unsigned int rtscts_rate, - unsigned int rtscts_duration) +static int +ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah, + struct ath5k_desc *desc, + unsigned int pkt_len, unsigned int hdr_len, + int padsize, + enum ath5k_pkt_type type, + unsigned int tx_power, + unsigned int tx_rate0, unsigned int tx_tries0, + unsigned int key_index, + unsigned int antenna_mode, + unsigned int flags, + unsigned int rtscts_rate, unsigned int rtscts_duration) { struct ath5k_hw_4w_tx_ctl *tx_ctl; unsigned int frame_len; @@ -292,13 +358,29 @@ static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah, return 0; } -/* - * Initialize a 4-word multi rate retry tx control descriptor on 5212 +/** + * ath5k_hw_setup_mrr_tx_desc() - Initialize an MRR tx control descriptor + * @ah: The &struct ath5k_hw + * @desc: The &struct ath5k_desc + * @tx_rate1: HW idx for rate used on transmission series 1 + * @tx_tries1: Max number of retransmissions for transmission series 1 + * @tx_rate2: HW idx for rate used on transmission series 2 + * @tx_tries2: Max number of retransmissions for transmission series 2 + * @tx_rate3: HW idx for rate used on transmission series 3 + * @tx_tries3: Max number of retransmissions for transmission series 3 + * + * Multi rate retry (MRR) tx control descriptors are available only on AR5212 + * MACs, they are part of the normal 4-word tx control descriptor (see above) + * but we handle them through a separate function for better abstraction. + * + * Returns 0 on success or -EINVAL on invalid input */ int -ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, - unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2, - u_int tx_tries2, unsigned int tx_rate3, u_int tx_tries3) +ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, + struct ath5k_desc *desc, + u_int tx_rate1, u_int tx_tries1, + u_int tx_rate2, u_int tx_tries2, + u_int tx_rate3, u_int tx_tries3) { struct ath5k_hw_4w_tx_ctl *tx_ctl; @@ -350,16 +432,19 @@ ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, * TX Status descriptors * \***********************/ -/* - * Process the tx status descriptor on 5210/5211 +/** + * ath5k_hw_proc_2word_tx_status() - Process a tx status descriptor on 5210/1 + * @ah: The &struct ath5k_hw + * @desc: The &struct ath5k_desc + * @ts: The &struct ath5k_tx_status */ -static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah, - struct ath5k_desc *desc, struct ath5k_tx_status *ts) +static int +ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah, + struct ath5k_desc *desc, + struct ath5k_tx_status *ts) { - struct ath5k_hw_2w_tx_ctl *tx_ctl; struct ath5k_hw_tx_status *tx_status; - tx_ctl = &desc->ud.ds_tx5210.tx_ctl; tx_status = &desc->ud.ds_tx5210.tx_stat; /* No frame has been send or error */ @@ -399,17 +484,20 @@ static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah, return 0; } -/* - * Process a tx status descriptor on 5212 +/** + * ath5k_hw_proc_4word_tx_status() - Process a tx status descriptor on 5212 + * @ah: The &struct ath5k_hw + * @desc: The &struct ath5k_desc + * @ts: The &struct ath5k_tx_status */ -static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *ah, - struct ath5k_desc *desc, struct ath5k_tx_status *ts) +static int +ath5k_hw_proc_4word_tx_status(struct ath5k_hw *ah, + struct ath5k_desc *desc, + struct ath5k_tx_status *ts) { - struct ath5k_hw_4w_tx_ctl *tx_ctl; struct ath5k_hw_tx_status *tx_status; u32 txstat0, txstat1; - tx_ctl = &desc->ud.ds_tx5212.tx_ctl; tx_status = &desc->ud.ds_tx5212.tx_stat; txstat1 = ACCESS_ONCE(tx_status->tx_status_1); @@ -460,11 +548,17 @@ static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *ah, * RX Descriptors * \****************/ -/* - * Initialize an rx control descriptor +/** + * ath5k_hw_setup_rx_desc() - Initialize an rx control descriptor + * @ah: The &struct ath5k_hw + * @desc: The &struct ath5k_desc + * @size: RX buffer length in bytes + * @flags: One of AR5K_RXDESC_* flags */ -int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, - u32 size, unsigned int flags) +int +ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, + struct ath5k_desc *desc, + u32 size, unsigned int flags) { struct ath5k_hw_rx_ctl *rx_ctl; @@ -491,11 +585,22 @@ int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, return 0; } -/* - * Process the rx status descriptor on 5210/5211 +/** + * ath5k_hw_proc_5210_rx_status() - Process the rx status descriptor on 5210/1 + * @ah: The &struct ath5k_hw + * @desc: The &struct ath5k_desc + * @rs: The &struct ath5k_rx_status + * + * Internal function used to process an RX status descriptor + * on AR5210/5211 MAC. + * + * Returns 0 on success or -EINPROGRESS in case we haven't received the who;e + * frame yet. */ -static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah, - struct ath5k_desc *desc, struct ath5k_rx_status *rs) +static int +ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah, + struct ath5k_desc *desc, + struct ath5k_rx_status *rs) { struct ath5k_hw_rx_status *rx_status; @@ -574,12 +679,22 @@ static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah, return 0; } -/* - * Process the rx status descriptor on 5212 +/** + * ath5k_hw_proc_5212_rx_status() - Process the rx status descriptor on 5212 + * @ah: The &struct ath5k_hw + * @desc: The &struct ath5k_desc + * @rs: The &struct ath5k_rx_status + * + * Internal function used to process an RX status descriptor + * on AR5212 and later MAC. + * + * Returns 0 on success or -EINPROGRESS in case we haven't received the who;e + * frame yet. */ -static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *ah, - struct ath5k_desc *desc, - struct ath5k_rx_status *rs) +static int +ath5k_hw_proc_5212_rx_status(struct ath5k_hw *ah, + struct ath5k_desc *desc, + struct ath5k_rx_status *rs) { struct ath5k_hw_rx_status *rx_status; u32 rxstat0, rxstat1; @@ -646,10 +761,16 @@ static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *ah, * Attach * \********/ -/* - * Init function pointers inside ath5k_hw struct +/** + * ath5k_hw_init_desc_functions() - Init function pointers inside ah + * @ah: The &struct ath5k_hw + * + * Maps the internal descriptor functions to the function pointers on ah, used + * from above. This is used as an abstraction layer to handle the various chips + * the same way. */ -int ath5k_hw_init_desc_functions(struct ath5k_hw *ah) +int +ath5k_hw_init_desc_functions(struct ath5k_hw *ah) { if (ah->ah_version == AR5K_AR5212) { ah->ah_setup_tx_desc = ath5k_hw_setup_4word_tx_desc; diff --git a/drivers/net/wireless/ath/ath5k/desc.h b/drivers/net/wireless/ath/ath5k/desc.h index cfd529b548f..8d6c01a49ea 100644 --- a/drivers/net/wireless/ath/ath5k/desc.h +++ b/drivers/net/wireless/ath/ath5k/desc.h @@ -20,25 +20,30 @@ * RX/TX descriptor structures */ -/* - * Common hardware RX control descriptor +/** + * struct ath5k_hw_rx_ctl - Common hardware RX control descriptor + * @rx_control_0: RX control word 0 + * @rx_control_1: RX control word 1 */ struct ath5k_hw_rx_ctl { - u32 rx_control_0; /* RX control word 0 */ - u32 rx_control_1; /* RX control word 1 */ + u32 rx_control_0; + u32 rx_control_1; } __packed __aligned(4); /* RX control word 1 fields/flags */ #define AR5K_DESC_RX_CTL1_BUF_LEN 0x00000fff /* data buffer length */ #define AR5K_DESC_RX_CTL1_INTREQ 0x00002000 /* RX interrupt request */ -/* - * Common hardware RX status descriptor +/** + * struct ath5k_hw_rx_status - Common hardware RX status descriptor + * @rx_status_0: RX status word 0 + * @rx_status_1: RX status word 1 + * * 5210, 5211 and 5212 differ only in the fields and flags defined below */ struct ath5k_hw_rx_status { - u32 rx_status_0; /* RX status word 0 */ - u32 rx_status_1; /* RX status word 1 */ + u32 rx_status_0; + u32 rx_status_1; } __packed __aligned(4); /* 5210/5211 */ @@ -98,17 +103,36 @@ struct ath5k_hw_rx_status { /** * enum ath5k_phy_error_code - PHY Error codes + * @AR5K_RX_PHY_ERROR_UNDERRUN: Transmit underrun, [5210] No error + * @AR5K_RX_PHY_ERROR_TIMING: Timing error + * @AR5K_RX_PHY_ERROR_PARITY: Illegal parity + * @AR5K_RX_PHY_ERROR_RATE: Illegal rate + * @AR5K_RX_PHY_ERROR_LENGTH: Illegal length + * @AR5K_RX_PHY_ERROR_RADAR: Radar detect, [5210] 64 QAM rate + * @AR5K_RX_PHY_ERROR_SERVICE: Illegal service + * @AR5K_RX_PHY_ERROR_TOR: Transmit override receive + * @AR5K_RX_PHY_ERROR_OFDM_TIMING: OFDM Timing error [5212+] + * @AR5K_RX_PHY_ERROR_OFDM_SIGNAL_PARITY: OFDM Signal parity error [5212+] + * @AR5K_RX_PHY_ERROR_OFDM_RATE_ILLEGAL: OFDM Illegal rate [5212+] + * @AR5K_RX_PHY_ERROR_OFDM_LENGTH_ILLEGAL: OFDM Illegal length [5212+] + * @AR5K_RX_PHY_ERROR_OFDM_POWER_DROP: OFDM Power drop [5212+] + * @AR5K_RX_PHY_ERROR_OFDM_SERVICE: OFDM Service (?) [5212+] + * @AR5K_RX_PHY_ERROR_OFDM_RESTART: OFDM Restart (?) [5212+] + * @AR5K_RX_PHY_ERROR_CCK_TIMING: CCK Timing error [5212+] + * @AR5K_RX_PHY_ERROR_CCK_HEADER_CRC: Header CRC error [5212+] + * @AR5K_RX_PHY_ERROR_CCK_RATE_ILLEGAL: Illegal rate [5212+] + * @AR5K_RX_PHY_ERROR_CCK_SERVICE: CCK Service (?) [5212+] + * @AR5K_RX_PHY_ERROR_CCK_RESTART: CCK Restart (?) [5212+] */ enum ath5k_phy_error_code { - AR5K_RX_PHY_ERROR_UNDERRUN = 0, /* Transmit underrun, [5210] No error */ - AR5K_RX_PHY_ERROR_TIMING = 1, /* Timing error */ - AR5K_RX_PHY_ERROR_PARITY = 2, /* Illegal parity */ - AR5K_RX_PHY_ERROR_RATE = 3, /* Illegal rate */ - AR5K_RX_PHY_ERROR_LENGTH = 4, /* Illegal length */ - AR5K_RX_PHY_ERROR_RADAR = 5, /* Radar detect, [5210] 64 QAM rate */ - AR5K_RX_PHY_ERROR_SERVICE = 6, /* Illegal service */ - AR5K_RX_PHY_ERROR_TOR = 7, /* Transmit override receive */ - /* these are specific to the 5212 */ + AR5K_RX_PHY_ERROR_UNDERRUN = 0, + AR5K_RX_PHY_ERROR_TIMING = 1, + AR5K_RX_PHY_ERROR_PARITY = 2, + AR5K_RX_PHY_ERROR_RATE = 3, + AR5K_RX_PHY_ERROR_LENGTH = 4, + AR5K_RX_PHY_ERROR_RADAR = 5, + AR5K_RX_PHY_ERROR_SERVICE = 6, + AR5K_RX_PHY_ERROR_TOR = 7, AR5K_RX_PHY_ERROR_OFDM_TIMING = 17, AR5K_RX_PHY_ERROR_OFDM_SIGNAL_PARITY = 18, AR5K_RX_PHY_ERROR_OFDM_RATE_ILLEGAL = 19, @@ -123,12 +147,14 @@ enum ath5k_phy_error_code { AR5K_RX_PHY_ERROR_CCK_RESTART = 31, }; -/* - * 5210/5211 hardware 2-word TX control descriptor +/** + * struct ath5k_hw_2w_tx_ctl - 5210/5211 hardware 2-word TX control descriptor + * @tx_control_0: TX control word 0 + * @tx_control_1: TX control word 1 */ struct ath5k_hw_2w_tx_ctl { - u32 tx_control_0; /* TX control word 0 */ - u32 tx_control_1; /* TX control word 1 */ + u32 tx_control_0; + u32 tx_control_1; } __packed __aligned(4); /* TX control word 0 fields/flags */ @@ -177,14 +203,18 @@ struct ath5k_hw_2w_tx_ctl { #define AR5K_AR5210_TX_DESC_FRAME_TYPE_PIFS 4 #define AR5K_AR5211_TX_DESC_FRAME_TYPE_PRESP 4 -/* - * 5212 hardware 4-word TX control descriptor +/** + * struct ath5k_hw_4w_tx_ctl - 5212 hardware 4-word TX control descriptor + * @tx_control_0: TX control word 0 + * @tx_control_1: TX control word 1 + * @tx_control_2: TX control word 2 + * @tx_control_3: TX control word 3 */ struct ath5k_hw_4w_tx_ctl { - u32 tx_control_0; /* TX control word 0 */ - u32 tx_control_1; /* TX control word 1 */ - u32 tx_control_2; /* TX control word 2 */ - u32 tx_control_3; /* TX control word 3 */ + u32 tx_control_0; + u32 tx_control_1; + u32 tx_control_2; + u32 tx_control_3; } __packed __aligned(4); /* TX control word 0 fields/flags */ @@ -238,12 +268,14 @@ struct ath5k_hw_4w_tx_ctl { #define AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE 0x01f00000 /* RTS or CTS rate */ #define AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE_S 20 -/* - * Common TX status descriptor +/** + * struct ath5k_hw_tx_status - Common TX status descriptor + * @tx_status_0: TX status word 0 + * @tx_status_1: TX status word 1 */ struct ath5k_hw_tx_status { - u32 tx_status_0; /* TX status word 0 */ - u32 tx_status_1; /* TX status word 1 */ + u32 tx_status_0; + u32 tx_status_1; } __packed __aligned(4); /* TX status word 0 fields/flags */ @@ -276,37 +308,47 @@ struct ath5k_hw_tx_status { #define AR5K_DESC_TX_STATUS1_COMP_SUCCESS_5212 0x00800000 /* [5212] compression status */ #define AR5K_DESC_TX_STATUS1_XMIT_ANTENNA_5212 0x01000000 /* [5212] transmit antenna */ -/* - * 5210/5211 hardware TX descriptor +/** + * struct ath5k_hw_5210_tx_desc - 5210/5211 hardware TX descriptor + * @tx_ctl: The &struct ath5k_hw_2w_tx_ctl + * @tx_stat: The &struct ath5k_hw_tx_status */ struct ath5k_hw_5210_tx_desc { struct ath5k_hw_2w_tx_ctl tx_ctl; struct ath5k_hw_tx_status tx_stat; } __packed __aligned(4); -/* - * 5212 hardware TX descriptor +/** + * struct ath5k_hw_5212_tx_desc - 5212 hardware TX descriptor + * @tx_ctl: The &struct ath5k_hw_4w_tx_ctl + * @tx_stat: The &struct ath5k_hw_tx_status */ struct ath5k_hw_5212_tx_desc { struct ath5k_hw_4w_tx_ctl tx_ctl; struct ath5k_hw_tx_status tx_stat; } __packed __aligned(4); -/* - * Common hardware RX descriptor +/** + * struct ath5k_hw_all_rx_desc - Common hardware RX descriptor + * @rx_ctl: The &struct ath5k_hw_rx_ctl + * @rx_stat: The &struct ath5k_hw_rx_status */ struct ath5k_hw_all_rx_desc { struct ath5k_hw_rx_ctl rx_ctl; struct ath5k_hw_rx_status rx_stat; } __packed __aligned(4); -/* - * Atheros hardware DMA descriptor +/** + * struct ath5k_desc - Atheros hardware DMA descriptor + * @ds_link: Physical address of the next descriptor + * @ds_data: Physical address of data buffer (skb) + * @ud: Union containing hw_5xxx_tx_desc structs and hw_all_rx_desc + * * This is read and written to by the hardware */ struct ath5k_desc { - u32 ds_link; /* physical address of the next descriptor */ - u32 ds_data; /* physical address of data buffer (skb) */ + u32 ds_link; + u32 ds_data; union { struct ath5k_hw_5210_tx_desc ds_tx5210; diff --git a/drivers/net/wireless/ath/ath5k/dma.c b/drivers/net/wireless/ath/ath5k/dma.c index 2481f9c7f4b..e6c52f7c26e 100644 --- a/drivers/net/wireless/ath/ath5k/dma.c +++ b/drivers/net/wireless/ath/ath5k/dma.c @@ -20,18 +20,17 @@ * DMA and interrupt masking functions * \*************************************/ -/* - * dma.c - DMA and interrupt masking functions +/** + * DOC: DMA and interrupt masking functions * * Here we setup descriptor pointers (rxdp/txdp) start/stop dma engine and * handle queue setup for 5210 chipset (rest are handled on qcu.c). * Also we setup interrupt mask register (IMR) and read the various interrupt * status registers (ISR). - * - * TODO: Handle SISR on 5211+ and introduce a function to return the queue - * number that resulted the interrupt. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include "ath5k.h" #include "reg.h" #include "debug.h" @@ -42,22 +41,22 @@ \*********/ /** - * ath5k_hw_start_rx_dma - Start DMA receive - * + * ath5k_hw_start_rx_dma() - Start DMA receive * @ah: The &struct ath5k_hw */ -void ath5k_hw_start_rx_dma(struct ath5k_hw *ah) +void +ath5k_hw_start_rx_dma(struct ath5k_hw *ah) { ath5k_hw_reg_write(ah, AR5K_CR_RXE, AR5K_CR); ath5k_hw_reg_read(ah, AR5K_CR); } /** - * ath5k_hw_stop_rx_dma - Stop DMA receive - * + * ath5k_hw_stop_rx_dma() - Stop DMA receive * @ah: The &struct ath5k_hw */ -static int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah) +static int +ath5k_hw_stop_rx_dma(struct ath5k_hw *ah) { unsigned int i; @@ -79,24 +78,24 @@ static int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah) } /** - * ath5k_hw_get_rxdp - Get RX Descriptor's address - * + * ath5k_hw_get_rxdp() - Get RX Descriptor's address * @ah: The &struct ath5k_hw */ -u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah) +u32 +ath5k_hw_get_rxdp(struct ath5k_hw *ah) { return ath5k_hw_reg_read(ah, AR5K_RXDP); } /** - * ath5k_hw_set_rxdp - Set RX Descriptor's address - * + * ath5k_hw_set_rxdp() - Set RX Descriptor's address * @ah: The &struct ath5k_hw * @phys_addr: RX descriptor address * * Returns -EIO if rx is active */ -int ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr) +int +ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr) { if (ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_CR_RXE) { ATH5K_DBG(ah, ATH5K_DEBUG_DMA, @@ -114,8 +113,7 @@ int ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr) \**********/ /** - * ath5k_hw_start_tx_dma - Start DMA transmit for a specific queue - * + * ath5k_hw_start_tx_dma() - Start DMA transmit for a specific queue * @ah: The &struct ath5k_hw * @queue: The hw queue number * @@ -128,7 +126,8 @@ int ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr) * NOTE: Must be called after setting up tx control descriptor for that * queue (see below). */ -int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue) +int +ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue) { u32 tx_queue; @@ -177,17 +176,16 @@ int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue) } /** - * ath5k_hw_stop_tx_dma - Stop DMA transmit on a specific queue - * + * ath5k_hw_stop_tx_dma() - Stop DMA transmit on a specific queue * @ah: The &struct ath5k_hw * @queue: The hw queue number * * Stop DMA transmit on a specific hw queue and drain queue so we don't * have any pending frames. Returns -EBUSY if we still have pending frames, * -EINVAL if queue number is out of range or inactive. - * */ -static int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue) +static int +ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue) { unsigned int i = 40; u32 tx_queue, pending; @@ -320,14 +318,14 @@ static int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue) } /** - * ath5k_hw_stop_beacon_queue - Stop beacon queue - * - * @ah The &struct ath5k_hw - * @queue The queue number + * ath5k_hw_stop_beacon_queue() - Stop beacon queue + * @ah: The &struct ath5k_hw + * @queue: The queue number * * Returns -EIO if queue didn't stop */ -int ath5k_hw_stop_beacon_queue(struct ath5k_hw *ah, unsigned int queue) +int +ath5k_hw_stop_beacon_queue(struct ath5k_hw *ah, unsigned int queue) { int ret; ret = ath5k_hw_stop_tx_dma(ah, queue); @@ -340,8 +338,7 @@ int ath5k_hw_stop_beacon_queue(struct ath5k_hw *ah, unsigned int queue) } /** - * ath5k_hw_get_txdp - Get TX Descriptor's address for a specific queue - * + * ath5k_hw_get_txdp() - Get TX Descriptor's address for a specific queue * @ah: The &struct ath5k_hw * @queue: The hw queue number * @@ -352,7 +349,8 @@ int ath5k_hw_stop_beacon_queue(struct ath5k_hw *ah, unsigned int queue) * * XXX: Is TXDP read and clear ? */ -u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue) +u32 +ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue) { u16 tx_reg; @@ -382,10 +380,10 @@ u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue) } /** - * ath5k_hw_set_txdp - Set TX Descriptor's address for a specific queue - * + * ath5k_hw_set_txdp() - Set TX Descriptor's address for a specific queue * @ah: The &struct ath5k_hw * @queue: The hw queue number + * @phys_addr: The physical address * * Set TX descriptor's address for a specific queue. For 5210 we ignore * the queue number and we use tx queue type since we only have 2 queues @@ -394,7 +392,8 @@ u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue) * Returns -EINVAL if queue type is invalid for 5210 and -EIO if queue is still * active. */ -int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr) +int +ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr) { u16 tx_reg; @@ -435,8 +434,7 @@ int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr) } /** - * ath5k_hw_update_tx_triglevel - Update tx trigger level - * + * ath5k_hw_update_tx_triglevel() - Update tx trigger level * @ah: The &struct ath5k_hw * @increase: Flag to force increase of trigger level * @@ -444,15 +442,15 @@ int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr) * buffer (aka FIFO threshold) that is used to indicate when PCU flushes * the buffer and transmits its data. Lowering this results sending small * frames more quickly but can lead to tx underruns, raising it a lot can - * result other problems (i think bmiss is related). Right now we start with - * the lowest possible (64Bytes) and if we get tx underrun we increase it using - * the increase flag. Returns -EIO if we have reached maximum/minimum. + * result other problems. Right now we start with the lowest possible + * (64Bytes) and if we get tx underrun we increase it using the increase + * flag. Returns -EIO if we have reached maximum/minimum. * * XXX: Link this with tx DMA size ? - * XXX: Use it to save interrupts ? - * TODO: Needs testing, i think it's related to bmiss... + * XXX2: Use it to save interrupts ? */ -int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase) +int +ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase) { u32 trigger_level, imr; int ret = -EIO; @@ -498,21 +496,20 @@ done: \*******************/ /** - * ath5k_hw_is_intr_pending - Check if we have pending interrupts - * + * ath5k_hw_is_intr_pending() - Check if we have pending interrupts * @ah: The &struct ath5k_hw * * Check if we have pending interrupts to process. Returns 1 if we * have pending interrupts and 0 if we haven't. */ -bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah) +bool +ath5k_hw_is_intr_pending(struct ath5k_hw *ah) { return ath5k_hw_reg_read(ah, AR5K_INTPEND) == 1 ? 1 : 0; } /** - * ath5k_hw_get_isr - Get interrupt status - * + * ath5k_hw_get_isr() - Get interrupt status * @ah: The @struct ath5k_hw * @interrupt_mask: Driver's interrupt mask used to filter out * interrupts in sw. @@ -523,62 +520,171 @@ bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah) * being mapped on some standard non hw-specific positions * (check out &ath5k_int). * - * NOTE: We use read-and-clear register, so after this function is called ISR - * is zeroed. + * NOTE: We do write-to-clear, so the active PISR/SISR bits at the time this + * function gets called are cleared on return. */ -int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask) +int +ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask) { - u32 data; + u32 data = 0; /* - * Read interrupt status from the Interrupt Status register - * on 5210 + * Read interrupt status from Primary Interrupt + * Register. + * + * Note: PISR/SISR Not available on 5210 */ if (ah->ah_version == AR5K_AR5210) { - data = ath5k_hw_reg_read(ah, AR5K_ISR); - if (unlikely(data == AR5K_INT_NOCARD)) { - *interrupt_mask = data; + u32 isr = 0; + isr = ath5k_hw_reg_read(ah, AR5K_ISR); + if (unlikely(isr == AR5K_INT_NOCARD)) { + *interrupt_mask = isr; return -ENODEV; } - } else { + /* - * Read interrupt status from Interrupt - * Status Register shadow copy (Read And Clear) - * - * Note: PISR/SISR Not available on 5210 + * Filter out the non-common bits from the interrupt + * status. */ - data = ath5k_hw_reg_read(ah, AR5K_RAC_PISR); - if (unlikely(data == AR5K_INT_NOCARD)) { - *interrupt_mask = data; + *interrupt_mask = (isr & AR5K_INT_COMMON) & ah->ah_imr; + + /* Hanlde INT_FATAL */ + if (unlikely(isr & (AR5K_ISR_SSERR | AR5K_ISR_MCABT + | AR5K_ISR_DPERR))) + *interrupt_mask |= AR5K_INT_FATAL; + + /* + * XXX: BMISS interrupts may occur after association. + * I found this on 5210 code but it needs testing. If this is + * true we should disable them before assoc and re-enable them + * after a successful assoc + some jiffies. + interrupt_mask &= ~AR5K_INT_BMISS; + */ + + data = isr; + } else { + u32 pisr = 0; + u32 pisr_clear = 0; + u32 sisr0 = 0; + u32 sisr1 = 0; + u32 sisr2 = 0; + u32 sisr3 = 0; + u32 sisr4 = 0; + + /* Read PISR and SISRs... */ + pisr = ath5k_hw_reg_read(ah, AR5K_PISR); + if (unlikely(pisr == AR5K_INT_NOCARD)) { + *interrupt_mask = pisr; return -ENODEV; } - } - /* - * Get abstract interrupt mask (driver-compatible) - */ - *interrupt_mask = (data & AR5K_INT_COMMON) & ah->ah_imr; + sisr0 = ath5k_hw_reg_read(ah, AR5K_SISR0); + sisr1 = ath5k_hw_reg_read(ah, AR5K_SISR1); + sisr2 = ath5k_hw_reg_read(ah, AR5K_SISR2); + sisr3 = ath5k_hw_reg_read(ah, AR5K_SISR3); + sisr4 = ath5k_hw_reg_read(ah, AR5K_SISR4); - if (ah->ah_version != AR5K_AR5210) { - u32 sisr2 = ath5k_hw_reg_read(ah, AR5K_RAC_SISR2); + /* + * PISR holds the logical OR of interrupt bits + * from SISR registers: + * + * TXOK and TXDESC -> Logical OR of TXOK and TXDESC + * per-queue bits on SISR0 + * + * TXERR and TXEOL -> Logical OR of TXERR and TXEOL + * per-queue bits on SISR1 + * + * TXURN -> Logical OR of TXURN per-queue bits on SISR2 + * + * HIUERR -> Logical OR of MCABT, SSERR and DPER bits on SISR2 + * + * BCNMISC -> Logical OR of TIM, CAB_END, DTIM_SYNC + * BCN_TIMEOUT, CAB_TIMEOUT and DTIM + * (and TSFOOR ?) bits on SISR2 + * + * QCBRORN and QCBRURN -> Logical OR of QCBRORN and + * QCBRURN per-queue bits on SISR3 + * QTRIG -> Logical OR of QTRIG per-queue bits on SISR4 + * + * If we clean these bits on PISR we 'll also clear all + * related bits from SISRs, e.g. if we write the TXOK bit on + * PISR we 'll clean all TXOK bits from SISR0 so if a new TXOK + * interrupt got fired for another queue while we were reading + * the interrupt registers and we write back the TXOK bit on + * PISR we 'll lose it. So make sure that we don't write back + * on PISR any bits that come from SISRs. Clearing them from + * SISRs will also clear PISR so no need to worry here. + */ - /*HIU = Host Interface Unit (PCI etc)*/ - if (unlikely(data & (AR5K_ISR_HIUERR))) - *interrupt_mask |= AR5K_INT_FATAL; + /* XXX: There seems to be an issue on some cards + * with tx interrupt flags not being updated + * on PISR despite that all Tx interrupt bits + * are cleared on SISRs. Since we handle all + * Tx queues all together it shouldn't be an + * issue if we clear Tx interrupt flags also + * on PISR to avoid that. + */ + pisr_clear = (pisr & ~AR5K_ISR_BITS_FROM_SISRS) | + (pisr & AR5K_INT_TX_ALL); - /*Beacon Not Ready*/ - if (unlikely(data & (AR5K_ISR_BNR))) - *interrupt_mask |= AR5K_INT_BNR; + /* + * Write to clear them... + * Note: This means that each bit we write back + * to the registers will get cleared, leaving the + * rest unaffected. So this won't affect new interrupts + * we didn't catch while reading/processing, we 'll get + * them next time get_isr gets called. + */ + ath5k_hw_reg_write(ah, sisr0, AR5K_SISR0); + ath5k_hw_reg_write(ah, sisr1, AR5K_SISR1); + ath5k_hw_reg_write(ah, sisr2, AR5K_SISR2); + ath5k_hw_reg_write(ah, sisr3, AR5K_SISR3); + ath5k_hw_reg_write(ah, sisr4, AR5K_SISR4); + ath5k_hw_reg_write(ah, pisr_clear, AR5K_PISR); + /* Flush previous write */ + ath5k_hw_reg_read(ah, AR5K_PISR); + + /* + * Filter out the non-common bits from the interrupt + * status. + */ + *interrupt_mask = (pisr & AR5K_INT_COMMON) & ah->ah_imr; - if (unlikely(sisr2 & (AR5K_SISR2_SSERR | - AR5K_SISR2_DPERR | - AR5K_SISR2_MCABT))) - *interrupt_mask |= AR5K_INT_FATAL; - if (data & AR5K_ISR_TIM) + /* We treat TXOK,TXDESC, TXERR and TXEOL + * the same way (schedule the tx tasklet) + * so we track them all together per queue */ + if (pisr & AR5K_ISR_TXOK) + ah->ah_txq_isr_txok_all |= AR5K_REG_MS(sisr0, + AR5K_SISR0_QCU_TXOK); + + if (pisr & AR5K_ISR_TXDESC) + ah->ah_txq_isr_txok_all |= AR5K_REG_MS(sisr0, + AR5K_SISR0_QCU_TXDESC); + + if (pisr & AR5K_ISR_TXERR) + ah->ah_txq_isr_txok_all |= AR5K_REG_MS(sisr1, + AR5K_SISR1_QCU_TXERR); + + if (pisr & AR5K_ISR_TXEOL) + ah->ah_txq_isr_txok_all |= AR5K_REG_MS(sisr1, + AR5K_SISR1_QCU_TXEOL); + + /* Currently this is not much useful since we treat + * all queues the same way if we get a TXURN (update + * tx trigger level) but we might need it later on*/ + if (pisr & AR5K_ISR_TXURN) + ah->ah_txq_isr_txurn |= AR5K_REG_MS(sisr2, + AR5K_SISR2_QCU_TXURN); + + /* Misc Beacon related interrupts */ + + /* For AR5211 */ + if (pisr & AR5K_ISR_TIM) *interrupt_mask |= AR5K_INT_TIM; - if (data & AR5K_ISR_BCNMISC) { + /* For AR5212+ */ + if (pisr & AR5K_ISR_BCNMISC) { if (sisr2 & AR5K_SISR2_TIM) *interrupt_mask |= AR5K_INT_TIM; if (sisr2 & AR5K_SISR2_DTIM) @@ -591,63 +697,39 @@ int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask) *interrupt_mask |= AR5K_INT_CAB_TIMEOUT; } - if (data & AR5K_ISR_RXDOPPLER) - *interrupt_mask |= AR5K_INT_RX_DOPPLER; - if (data & AR5K_ISR_QCBRORN) { + /* Below interrupts are unlikely to happen */ + + /* HIU = Host Interface Unit (PCI etc) + * Can be one of MCABT, SSERR, DPERR from SISR2 */ + if (unlikely(pisr & (AR5K_ISR_HIUERR))) + *interrupt_mask |= AR5K_INT_FATAL; + + /*Beacon Not Ready*/ + if (unlikely(pisr & (AR5K_ISR_BNR))) + *interrupt_mask |= AR5K_INT_BNR; + + /* A queue got CBR overrun */ + if (unlikely(pisr & (AR5K_ISR_QCBRORN))) { *interrupt_mask |= AR5K_INT_QCBRORN; - ah->ah_txq_isr |= AR5K_REG_MS( - ath5k_hw_reg_read(ah, AR5K_RAC_SISR3), - AR5K_SISR3_QCBRORN); + ah->ah_txq_isr_qcborn |= AR5K_REG_MS(sisr3, + AR5K_SISR3_QCBRORN); } - if (data & AR5K_ISR_QCBRURN) { + + /* A queue got CBR underrun */ + if (unlikely(pisr & (AR5K_ISR_QCBRURN))) { *interrupt_mask |= AR5K_INT_QCBRURN; - ah->ah_txq_isr |= AR5K_REG_MS( - ath5k_hw_reg_read(ah, AR5K_RAC_SISR3), - AR5K_SISR3_QCBRURN); + ah->ah_txq_isr_qcburn |= AR5K_REG_MS(sisr3, + AR5K_SISR3_QCBRURN); } - if (data & AR5K_ISR_QTRIG) { + + /* A queue got triggered */ + if (unlikely(pisr & (AR5K_ISR_QTRIG))) { *interrupt_mask |= AR5K_INT_QTRIG; - ah->ah_txq_isr |= AR5K_REG_MS( - ath5k_hw_reg_read(ah, AR5K_RAC_SISR4), - AR5K_SISR4_QTRIG); + ah->ah_txq_isr_qtrig |= AR5K_REG_MS(sisr4, + AR5K_SISR4_QTRIG); } - if (data & AR5K_ISR_TXOK) - ah->ah_txq_isr |= AR5K_REG_MS( - ath5k_hw_reg_read(ah, AR5K_RAC_SISR0), - AR5K_SISR0_QCU_TXOK); - - if (data & AR5K_ISR_TXDESC) - ah->ah_txq_isr |= AR5K_REG_MS( - ath5k_hw_reg_read(ah, AR5K_RAC_SISR0), - AR5K_SISR0_QCU_TXDESC); - - if (data & AR5K_ISR_TXERR) - ah->ah_txq_isr |= AR5K_REG_MS( - ath5k_hw_reg_read(ah, AR5K_RAC_SISR1), - AR5K_SISR1_QCU_TXERR); - - if (data & AR5K_ISR_TXEOL) - ah->ah_txq_isr |= AR5K_REG_MS( - ath5k_hw_reg_read(ah, AR5K_RAC_SISR1), - AR5K_SISR1_QCU_TXEOL); - - if (data & AR5K_ISR_TXURN) - ah->ah_txq_isr |= AR5K_REG_MS( - ath5k_hw_reg_read(ah, AR5K_RAC_SISR2), - AR5K_SISR2_QCU_TXURN); - } else { - if (unlikely(data & (AR5K_ISR_SSERR | AR5K_ISR_MCABT - | AR5K_ISR_HIUERR | AR5K_ISR_DPERR))) - *interrupt_mask |= AR5K_INT_FATAL; - - /* - * XXX: BMISS interrupts may occur after association. - * I found this on 5210 code but it needs testing. If this is - * true we should disable them before assoc and re-enable them - * after a successful assoc + some jiffies. - interrupt_mask &= ~AR5K_INT_BMISS; - */ + data = pisr; } /* @@ -661,8 +743,7 @@ int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask) } /** - * ath5k_hw_set_imr - Set interrupt mask - * + * ath5k_hw_set_imr() - Set interrupt mask * @ah: The &struct ath5k_hw * @new_mask: The new interrupt mask to be set * @@ -670,7 +751,8 @@ int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask) * ath5k_int bits to hw-specific bits to remove abstraction and writing * Interrupt Mask Register. */ -enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask) +enum ath5k_int +ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask) { enum ath5k_int old_mask, int_mask; @@ -697,16 +779,14 @@ enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask) u32 simr2 = ath5k_hw_reg_read(ah, AR5K_SIMR2) & AR5K_SIMR2_QCU_TXURN; + /* Fatal interrupt abstraction for 5211+ */ if (new_mask & AR5K_INT_FATAL) { int_mask |= AR5K_IMR_HIUERR; simr2 |= (AR5K_SIMR2_MCABT | AR5K_SIMR2_SSERR | AR5K_SIMR2_DPERR); } - /*Beacon Not Ready*/ - if (new_mask & AR5K_INT_BNR) - int_mask |= AR5K_INT_BNR; - + /* Misc beacon related interrupts */ if (new_mask & AR5K_INT_TIM) int_mask |= AR5K_IMR_TIM; @@ -721,8 +801,9 @@ enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask) if (new_mask & AR5K_INT_CAB_TIMEOUT) simr2 |= AR5K_SISR2_CAB_TIMEOUT; - if (new_mask & AR5K_INT_RX_DOPPLER) - int_mask |= AR5K_IMR_RXDOPPLER; + /*Beacon Not Ready*/ + if (new_mask & AR5K_INT_BNR) + int_mask |= AR5K_INT_BNR; /* Note: Per queue interrupt masks * are set via ath5k_hw_reset_tx_queue() (qcu.c) */ @@ -730,10 +811,12 @@ enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask) ath5k_hw_reg_write(ah, simr2, AR5K_SIMR2); } else { + /* Fatal interrupt abstraction for 5210 */ if (new_mask & AR5K_INT_FATAL) int_mask |= (AR5K_IMR_SSERR | AR5K_IMR_MCABT | AR5K_IMR_HIUERR | AR5K_IMR_DPERR); + /* Only common interrupts left for 5210 (no SIMRs) */ ath5k_hw_reg_write(ah, int_mask, AR5K_IMR); } @@ -760,8 +843,7 @@ enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask) \********************/ /** - * ath5k_hw_dma_init - Initialize DMA unit - * + * ath5k_hw_dma_init() - Initialize DMA unit * @ah: The &struct ath5k_hw * * Set DMA size and pre-enable interrupts @@ -770,7 +852,8 @@ enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask) * * XXX: Save/restore RXDP/TXDP registers ? */ -void ath5k_hw_dma_init(struct ath5k_hw *ah) +void +ath5k_hw_dma_init(struct ath5k_hw *ah) { /* * Set Rx/Tx DMA Configuration @@ -799,8 +882,7 @@ void ath5k_hw_dma_init(struct ath5k_hw *ah) } /** - * ath5k_hw_dma_stop - stop DMA unit - * + * ath5k_hw_dma_stop() - stop DMA unit * @ah: The &struct ath5k_hw * * Stop tx/rx DMA and interrupts. Returns @@ -810,7 +892,8 @@ void ath5k_hw_dma_init(struct ath5k_hw *ah) * stuck frames on tx queues, only a reset * can fix that. */ -int ath5k_hw_dma_stop(struct ath5k_hw *ah) +int +ath5k_hw_dma_stop(struct ath5k_hw *ah) { int i, qmax, err; err = 0; diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c index cd708c15b77..94d34ee0226 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.c +++ b/drivers/net/wireless/ath/ath5k/eeprom.c @@ -21,6 +21,8 @@ * EEPROM access functions and helpers * \*************************************/ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/slab.h> #include "ath5k.h" @@ -1480,7 +1482,7 @@ ath5k_eeprom_read_target_rate_pwr_info(struct ath5k_hw *ah, unsigned int mode) case AR5K_EEPROM_MODE_11A: offset += AR5K_EEPROM_TARGET_PWR_OFF_11A(ee->ee_version); rate_pcal_info = ee->ee_rate_tpwr_a; - ee->ee_rate_target_pwr_num[mode] = AR5K_EEPROM_N_5GHZ_CHAN; + ee->ee_rate_target_pwr_num[mode] = AR5K_EEPROM_N_5GHZ_RATE_CHAN; break; case AR5K_EEPROM_MODE_11B: offset += AR5K_EEPROM_TARGET_PWR_OFF_11B(ee->ee_version); @@ -1777,7 +1779,8 @@ ath5k_eeprom_detach(struct ath5k_hw *ah) } int -ath5k_eeprom_mode_from_channel(struct ieee80211_channel *channel) +ath5k_eeprom_mode_from_channel(struct ath5k_hw *ah, + struct ieee80211_channel *channel) { switch (channel->hw_value) { case AR5K_MODE_11A: @@ -1787,6 +1790,7 @@ ath5k_eeprom_mode_from_channel(struct ieee80211_channel *channel) case AR5K_MODE_11B: return AR5K_EEPROM_MODE_11B; default: - return -1; + ATH5K_WARN(ah, "channel is not A/B/G!"); + return AR5K_EEPROM_MODE_11A; } } diff --git a/drivers/net/wireless/ath/ath5k/eeprom.h b/drivers/net/wireless/ath/ath5k/eeprom.h index dc2bcfeadeb..693296ee969 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.h +++ b/drivers/net/wireless/ath/ath5k/eeprom.h @@ -182,6 +182,7 @@ #define AR5K_EEPROM_EEP_DELTA 10 #define AR5K_EEPROM_N_MODES 3 #define AR5K_EEPROM_N_5GHZ_CHAN 10 +#define AR5K_EEPROM_N_5GHZ_RATE_CHAN 8 #define AR5K_EEPROM_N_2GHZ_CHAN 3 #define AR5K_EEPROM_N_2GHZ_CHAN_2413 4 #define AR5K_EEPROM_N_2GHZ_CHAN_MAX 4 @@ -492,6 +493,3 @@ struct ath5k_eeprom_info { /* Antenna raw switch tables */ u32 ee_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX]; }; - -int -ath5k_eeprom_mode_from_channel(struct ieee80211_channel *channel); diff --git a/drivers/net/wireless/ath/ath5k/gpio.c b/drivers/net/wireless/ath/ath5k/gpio.c index 85929781191..73d3dd8a306 100644 --- a/drivers/net/wireless/ath/ath5k/gpio.c +++ b/drivers/net/wireless/ath/ath5k/gpio.c @@ -24,10 +24,33 @@ #include "reg.h" #include "debug.h" -/* - * Set led state + +/** + * DOC: GPIO/LED functions + * + * Here we control the 6 bidirectional GPIO pins provided by the hw. + * We can set a GPIO pin to be an input or an output pin on GPIO control + * register and then read or set its status from GPIO data input/output + * registers. + * + * We also control the two LED pins provided by the hw, LED_0 is our + * "power" LED and LED_1 is our "network activity" LED but many scenarios + * are available from hw. Vendors might also provide LEDs connected to the + * GPIO pins, we handle them through the LED subsystem on led.c + */ + + +/** + * ath5k_hw_set_ledstate() - Set led state + * @ah: The &struct ath5k_hw + * @state: One of AR5K_LED_* + * + * Used to set the LED blinking state. This only + * works for the LED connected to the LED_0, LED_1 pins, + * not the GPIO based. */ -void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state) +void +ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state) { u32 led; /*5210 has different led mode handling*/ @@ -74,10 +97,13 @@ void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state) AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led_5210); } -/* - * Set GPIO inputs +/** + * ath5k_hw_set_gpio_input() - Set GPIO inputs + * @ah: The &struct ath5k_hw + * @gpio: GPIO pin to set as input */ -int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio) +int +ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio) { if (gpio >= AR5K_NUM_GPIO) return -EINVAL; @@ -89,10 +115,13 @@ int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio) return 0; } -/* - * Set GPIO outputs +/** + * ath5k_hw_set_gpio_output() - Set GPIO outputs + * @ah: The &struct ath5k_hw + * @gpio: The GPIO pin to set as output */ -int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio) +int +ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio) { if (gpio >= AR5K_NUM_GPIO) return -EINVAL; @@ -104,10 +133,13 @@ int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio) return 0; } -/* - * Get GPIO state +/** + * ath5k_hw_get_gpio() - Get GPIO state + * @ah: The &struct ath5k_hw + * @gpio: The GPIO pin to read */ -u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio) +u32 +ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio) { if (gpio >= AR5K_NUM_GPIO) return 0xffffffff; @@ -117,10 +149,14 @@ u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio) 0x1; } -/* - * Set GPIO state +/** + * ath5k_hw_set_gpio() - Set GPIO state + * @ah: The &struct ath5k_hw + * @gpio: The GPIO pin to set + * @val: Value to set (boolean) */ -int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val) +int +ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val) { u32 data; @@ -138,10 +174,19 @@ int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val) return 0; } -/* - * Initialize the GPIO interrupt (RFKill switch) +/** + * ath5k_hw_set_gpio_intr() - Initialize the GPIO interrupt (RFKill switch) + * @ah: The &struct ath5k_hw + * @gpio: The GPIO pin to use + * @interrupt_level: True to generate interrupt on active pin (high) + * + * This function is used to set up the GPIO interrupt for the hw RFKill switch. + * That switch is connected to a GPIO pin and it's number is stored on EEPROM. + * It can either open or close the circuit to indicate that we should disable + * RF/Wireless to save power (we also get that from EEPROM). */ -void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, +void +ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, u32 interrupt_level) { u32 data; diff --git a/drivers/net/wireless/ath/ath5k/initvals.c b/drivers/net/wireless/ath/ath5k/initvals.c index 1ffecc0fd3e..ee1c2fa8b59 100644 --- a/drivers/net/wireless/ath/ath5k/initvals.c +++ b/drivers/net/wireless/ath/ath5k/initvals.c @@ -19,28 +19,33 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include "ath5k.h" #include "reg.h" #include "debug.h" -/* - * Mode-independent initial register writes +/** + * struct ath5k_ini - Mode-independent initial register writes + * @ini_register: Register address + * @ini_value: Default value + * @ini_mode: 0 to write 1 to read (and clear) */ - struct ath5k_ini { u16 ini_register; u32 ini_value; enum { AR5K_INI_WRITE = 0, /* Default */ - AR5K_INI_READ = 1, /* Cleared on read */ + AR5K_INI_READ = 1, } ini_mode; }; -/* - * Mode specific initial register values +/** + * struct ath5k_ini_mode - Mode specific initial register values + * @mode_register: Register address + * @mode_value: Set of values for each enum ath5k_driver_mode */ - struct ath5k_ini_mode { u16 mode_register; u32 mode_value[3]; @@ -386,11 +391,10 @@ static const struct ath5k_ini ar5211_ini[] = { /* Initial mode-specific settings for AR5211 * 5211 supports OFDM-only g (draft g) but we - * need to test it ! - */ + * need to test it ! */ static const struct ath5k_ini_mode ar5211_ini_mode[] = { { AR5K_TXCFG, - /* A/XR B G */ + /* A B G */ { 0x00000015, 0x0000001d, 0x00000015 } }, { AR5K_QUEUE_DFS_LOCAL_IFS(0), { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, @@ -460,7 +464,7 @@ static const struct ath5k_ini_mode ar5211_ini_mode[] = { { 0x00000010, 0x00000010, 0x00000010 } }, }; -/* Initial register settings for AR5212 */ +/* Initial register settings for AR5212 and newer chips */ static const struct ath5k_ini ar5212_ini_common_start[] = { { AR5K_RXDP, 0x00000000 }, { AR5K_RXCFG, 0x00000005 }, @@ -724,7 +728,8 @@ static const struct ath5k_ini_mode ar5212_ini_mode_start[] = { { 0x00000000, 0x00000000, 0x00000108 } }, }; -/* Initial mode-specific settings for AR5212 + RF5111 (Written after ar5212_ini) */ +/* Initial mode-specific settings for AR5212 + RF5111 + * (Written after ar5212_ini) */ static const struct ath5k_ini_mode rf5111_ini_mode_end[] = { { AR5K_TXCFG, /* A/XR B G */ @@ -757,6 +762,7 @@ static const struct ath5k_ini_mode rf5111_ini_mode_end[] = { { 0x1883800a, 0x1873800a, 0x1883800a } }, }; +/* Common for all modes */ static const struct ath5k_ini rf5111_ini_common_end[] = { { AR5K_DCU_FP, 0x00000000 }, { AR5K_PHY_AGC, 0x00000000 }, @@ -774,7 +780,9 @@ static const struct ath5k_ini rf5111_ini_common_end[] = { { 0xa23c, 0x13c889af }, }; -/* Initial mode-specific settings for AR5212 + RF5112 (Written after ar5212_ini) */ + +/* Initial mode-specific settings for AR5212 + RF5112 + * (Written after ar5212_ini) */ static const struct ath5k_ini_mode rf5112_ini_mode_end[] = { { AR5K_TXCFG, /* A/XR B G */ @@ -825,7 +833,9 @@ static const struct ath5k_ini rf5112_ini_common_end[] = { { 0xa23c, 0x13c889af }, }; -/* Initial mode-specific settings for RF5413/5414 (Written after ar5212_ini) */ + +/* Initial mode-specific settings for RF5413/5414 + * (Written after ar5212_ini) */ static const struct ath5k_ini_mode rf5413_ini_mode_end[] = { { AR5K_TXCFG, /* A/XR B G */ @@ -963,7 +973,8 @@ static const struct ath5k_ini rf5413_ini_common_end[] = { { 0xa384, 0xf3307ff0 }, }; -/* Initial mode-specific settings for RF2413/2414 (Written after ar5212_ini) */ +/* Initial mode-specific settings for RF2413/2414 + * (Written after ar5212_ini) */ /* XXX: a mode ? */ static const struct ath5k_ini_mode rf2413_ini_mode_end[] = { { AR5K_TXCFG, @@ -1085,7 +1096,8 @@ static const struct ath5k_ini rf2413_ini_common_end[] = { { 0xa384, 0xf3307ff0 }, }; -/* Initial mode-specific settings for RF2425 (Written after ar5212_ini) */ +/* Initial mode-specific settings for RF2425 + * (Written after ar5212_ini) */ /* XXX: a mode ? */ static const struct ath5k_ini_mode rf2425_ini_mode_end[] = { { AR5K_TXCFG, @@ -1357,10 +1369,15 @@ static const struct ath5k_ini rf5112_ini_bbgain[] = { }; -/* - * Write initial register dump +/** + * ath5k_hw_ini_registers() - Write initial register dump common for all modes + * @ah: The &struct ath5k_hw + * @size: Dump size + * @ini_regs: The array of &struct ath5k_ini + * @skip_pcu: Skip PCU registers */ -static void ath5k_hw_ini_registers(struct ath5k_hw *ah, unsigned int size, +static void +ath5k_hw_ini_registers(struct ath5k_hw *ah, unsigned int size, const struct ath5k_ini *ini_regs, bool skip_pcu) { unsigned int i; @@ -1388,7 +1405,15 @@ static void ath5k_hw_ini_registers(struct ath5k_hw *ah, unsigned int size, } } -static void ath5k_hw_ini_mode_registers(struct ath5k_hw *ah, +/** + * ath5k_hw_ini_mode_registers() - Write initial mode-specific register dump + * @ah: The &struct ath5k_hw + * @size: Dump size + * @ini_mode: The array of &struct ath5k_ini_mode + * @mode: One of enum ath5k_driver_mode + */ +static void +ath5k_hw_ini_mode_registers(struct ath5k_hw *ah, unsigned int size, const struct ath5k_ini_mode *ini_mode, u8 mode) { @@ -1402,7 +1427,17 @@ static void ath5k_hw_ini_mode_registers(struct ath5k_hw *ah, } -int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool skip_pcu) +/** + * ath5k_hw_write_initvals() - Write initial chip-specific register dump + * @ah: The &struct ath5k_hw + * @mode: One of enum ath5k_driver_mode + * @skip_pcu: Skip PCU registers + * + * Write initial chip-specific register dump, to get the chipset on a + * clean and ready-to-work state after warm reset. + */ +int +ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool skip_pcu) { /* * Write initial register settings @@ -1541,8 +1576,7 @@ int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool skip_pcu) /* AR5K_MODE_11B */ if (mode > 2) { - ATH5K_ERR(ah, - "unsupported channel mode: %d\n", mode); + ATH5K_ERR(ah, "unsupported channel mode: %d\n", mode); return -EINVAL; } diff --git a/drivers/net/wireless/ath/ath5k/led.c b/drivers/net/wireless/ath/ath5k/led.c index c1151c72371..f77ef36acf8 100644 --- a/drivers/net/wireless/ath/ath5k/led.c +++ b/drivers/net/wireless/ath/ath5k/led.c @@ -39,6 +39,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/pci.h> #include "ath5k.h" @@ -156,7 +158,7 @@ void ath5k_unregister_leds(struct ath5k_hw *ah) ath5k_unregister_led(&ah->tx_led); } -int __devinit ath5k_init_leds(struct ath5k_hw *ah) +int ath5k_init_leds(struct ath5k_hw *ah) { int ret = 0; struct ieee80211_hw *hw = ah->hw; diff --git a/drivers/net/wireless/ath/ath5k/mac80211-ops.c b/drivers/net/wireless/ath/ath5k/mac80211-ops.c index 6ed4c0717e3..afb23b3cc7b 100644 --- a/drivers/net/wireless/ath/ath5k/mac80211-ops.c +++ b/drivers/net/wireless/ath/ath5k/mac80211-ops.c @@ -41,6 +41,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <net/mac80211.h> #include <asm/unaligned.h> @@ -53,17 +55,18 @@ \********************/ static void -ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb) +ath5k_tx(struct ieee80211_hw *hw, struct ieee80211_tx_control *control, + struct sk_buff *skb) { struct ath5k_hw *ah = hw->priv; u16 qnum = skb_get_queue_mapping(skb); if (WARN_ON(qnum >= ah->ah_capabilities.cap_queues.q_tx_num)) { - dev_kfree_skb_any(skb); + ieee80211_free_txskb(hw, skb); return; } - ath5k_tx_queue(hw, skb, &ah->txqs[qnum]); + ath5k_tx_queue(hw, skb, &ah->txqs[qnum], control); } @@ -134,6 +137,8 @@ ath5k_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) ah->num_ap_vifs++; else if (avf->opmode == NL80211_IFTYPE_ADHOC) ah->num_adhoc_vifs++; + else if (avf->opmode == NL80211_IFTYPE_MESH_POINT) + ah->num_mesh_vifs++; } /* Any MAC address is fine, all others are included through the @@ -175,6 +180,8 @@ ath5k_remove_interface(struct ieee80211_hw *hw, ah->num_ap_vifs--; else if (avf->opmode == NL80211_IFTYPE_ADHOC) ah->num_adhoc_vifs--; + else if (avf->opmode == NL80211_IFTYPE_MESH_POINT) + ah->num_mesh_vifs--; ath5k_update_bssid_mask_and_opmode(ah, NULL); mutex_unlock(&ah->lock); @@ -195,14 +202,14 @@ ath5k_config(struct ieee80211_hw *hw, u32 changed) mutex_lock(&ah->lock); if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { - ret = ath5k_chan_set(ah, conf->channel); + ret = ath5k_chan_set(ah, &conf->chandef); if (ret < 0) goto unlock; } if ((changed & IEEE80211_CONF_CHANGE_POWER) && - (ah->power_level != conf->power_level)) { - ah->power_level = conf->power_level; + (ah->ah_txpower.txp_requested != conf->power_level)) { + ah->ah_txpower.txp_requested = conf->power_level; /* Half dB steps */ ath5k_hw_set_txpower_limit(ah, (conf->power_level * 2)); @@ -248,7 +255,6 @@ ath5k_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ath5k_vif *avf = (void *)vif->drv_priv; struct ath5k_hw *ah = hw->priv; struct ath_common *common = ath5k_hw_common(ah); - unsigned long flags; mutex_lock(&ah->lock); @@ -294,9 +300,9 @@ ath5k_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, } if (changes & BSS_CHANGED_BEACON) { - spin_lock_irqsave(&ah->block, flags); + spin_lock_bh(&ah->block); ath5k_beacon_update(hw, vif); - spin_unlock_irqrestore(&ah->block, flags); + spin_unlock_bh(&ah->block); } if (changes & BSS_CHANGED_BEACON_ENABLED) @@ -319,7 +325,7 @@ ath5k_prepare_multicast(struct ieee80211_hw *hw, struct netdev_hw_addr *ha; mfilt[0] = 0; - mfilt[1] = 1; + mfilt[1] = 0; netdev_hw_addr_list_for_each(ha, mc_list) { /* calculate XOR of eight 6-bit values */ @@ -446,8 +452,9 @@ ath5k_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags, iter_data.hw_macaddr = NULL; iter_data.n_stas = 0; iter_data.need_set_hw_addr = false; - ieee80211_iterate_active_interfaces_atomic(ah->hw, ath5k_vif_iter, - &iter_data); + ieee80211_iterate_active_interfaces_atomic( + ah->hw, IEEE80211_IFACE_ITER_RESUME_ALL, + ath5k_vif_iter, &iter_data); /* Set up RX Filter */ if (iter_data.n_stas > 1) { @@ -483,6 +490,17 @@ ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, if (ath5k_modparam_nohwcrypt) return -EOPNOTSUPP; + if (key->flags & IEEE80211_KEY_FLAG_RX_MGMT) + return -EOPNOTSUPP; + + if (vif->type == NL80211_IFTYPE_ADHOC && + (key->cipher == WLAN_CIPHER_SUITE_TKIP || + key->cipher == WLAN_CIPHER_SUITE_CCMP) && + !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) { + /* don't program group keys when using IBSS_RSN */ + return -EOPNOTSUPP; + } + switch (key->cipher) { case WLAN_CIPHER_SUITE_WEP40: case WLAN_CIPHER_SUITE_WEP104: @@ -509,7 +527,7 @@ ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, if (key->cipher == WLAN_CIPHER_SUITE_TKIP) key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; if (key->cipher == WLAN_CIPHER_SUITE_CCMP) - key->flags |= IEEE80211_KEY_FLAG_SW_MGMT; + key->flags |= IEEE80211_KEY_FLAG_SW_MGMT_TX; ret = 0; } break; @@ -580,7 +598,7 @@ ath5k_conf_tx(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u16 queue, qi.tqi_aifs = params->aifs; qi.tqi_cw_min = params->cw_min; qi.tqi_cw_max = params->cw_max; - qi.tqi_burst_time = params->txop; + qi.tqi_burst_time = params->txop * 32; ATH5K_DBG(ah, ATH5K_DEBUG_ANY, "Configure tx [queue %d], " @@ -660,9 +678,10 @@ ath5k_get_survey(struct ieee80211_hw *hw, int idx, struct survey_info *survey) memcpy(survey, &ah->survey, sizeof(*survey)); - survey->channel = conf->channel; + survey->channel = conf->chandef.chan; survey->noise = ah->ah_noise_floor; survey->filled = SURVEY_INFO_NOISE_DBM | + SURVEY_INFO_IN_USE | SURVEY_INFO_CHANNEL_TIME | SURVEY_INFO_CHANNEL_TIME_BUSY | SURVEY_INFO_CHANNEL_TIME_RX | diff --git a/drivers/net/wireless/ath/ath5k/pci.c b/drivers/net/wireless/ath/ath5k/pci.c index dfa48eb7d95..859db7c34f8 100644 --- a/drivers/net/wireless/ath/ath5k/pci.c +++ b/drivers/net/wireless/ath/ath5k/pci.c @@ -14,6 +14,8 @@ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/nl80211.h> #include <linux/pci.h> #include <linux/pci-aspm.h> @@ -45,6 +47,7 @@ static DEFINE_PCI_DEVICE_TABLE(ath5k_pci_id_table) = { { PCI_VDEVICE(ATHEROS, 0x001b) }, /* 5413 Eagle */ { PCI_VDEVICE(ATHEROS, 0x001c) }, /* PCI-E cards */ { PCI_VDEVICE(ATHEROS, 0x001d) }, /* 2417 Nala */ + { PCI_VDEVICE(ATHEROS, 0xff1b) }, /* AR5BXB63 */ { 0 } }; MODULE_DEVICE_TABLE(pci, ath5k_pci_id_table); @@ -98,7 +101,7 @@ ath5k_pci_eeprom_read(struct ath_common *common, u32 offset, u16 *data) 0xffff); return true; } - udelay(15); + usleep_range(15, 20); } return false; @@ -152,7 +155,7 @@ static const struct ath_bus_ops ath_pci_bus_ops = { * PCI Initialization * \********************/ -static int __devinit +static int ath5k_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { @@ -282,7 +285,7 @@ err: return ret; } -static void __devexit +static void ath5k_pci_remove(struct pci_dev *pdev) { struct ieee80211_hw *hw = pci_get_drvdata(pdev); @@ -333,32 +336,8 @@ static struct pci_driver ath5k_pci_driver = { .name = KBUILD_MODNAME, .id_table = ath5k_pci_id_table, .probe = ath5k_pci_probe, - .remove = __devexit_p(ath5k_pci_remove), + .remove = ath5k_pci_remove, .driver.pm = ATH5K_PM_OPS, }; -/* - * Module init/exit functions - */ -static int __init -init_ath5k_pci(void) -{ - int ret; - - ret = pci_register_driver(&ath5k_pci_driver); - if (ret) { - printk(KERN_ERR "ath5k_pci: can't register pci driver\n"); - return ret; - } - - return 0; -} - -static void __exit -exit_ath5k_pci(void) -{ - pci_unregister_driver(&ath5k_pci_driver); -} - -module_init(init_ath5k_pci); -module_exit(exit_ath5k_pci); +module_pci_driver(ath5k_pci_driver); diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c index a7eafa3edc2..c60d36aa13e 100644 --- a/drivers/net/wireless/ath/ath5k/pcu.c +++ b/drivers/net/wireless/ath/ath5k/pcu.c @@ -30,11 +30,47 @@ #include "reg.h" #include "debug.h" -/* +/** + * DOC: Protocol Control Unit (PCU) functions + * + * Protocol control unit is responsible to maintain various protocol + * properties before a frame is send and after a frame is received to/from + * baseband. To be more specific, PCU handles: + * + * - Buffering of RX and TX frames (after QCU/DCUs) + * + * - Encrypting and decrypting (using the built-in engine) + * + * - Generating ACKs, RTS/CTS frames + * + * - Maintaining TSF + * + * - FCS + * + * - Updating beacon data (with TSF etc) + * + * - Generating virtual CCA + * + * - RX/Multicast filtering + * + * - BSSID filtering + * + * - Various statistics + * + * -Different operating modes: AP, STA, IBSS + * + * Note: Most of these functions can be tweaked/bypassed so you can do + * them on sw above for debugging or research. For more infos check out PCU + * registers on reg.h. + */ + +/** + * DOC: ACK rates + * * AR5212+ can use higher rates for ack transmission * based on current tx rate instead of the base rate. * It does this to better utilize channel usage. - * This is a mapping between G rates (that cover both + * There is a mapping between G rates (that cover both * CCK and OFDM) and ack rates that we use when setting * rate -> duration table. This mapping is hw-based so * don't change anything. @@ -63,17 +99,18 @@ static const unsigned int ack_rates_high[] = \*******************/ /** - * ath5k_hw_get_frame_duration - Get tx time of a frame - * + * ath5k_hw_get_frame_duration() - Get tx time of a frame * @ah: The &struct ath5k_hw * @len: Frame's length in bytes * @rate: The @struct ieee80211_rate + * @shortpre: Indicate short preample * * Calculate tx duration of a frame given it's rate and length * It extends ieee80211_generic_frame_duration for non standard * bwmodes. */ -int ath5k_hw_get_frame_duration(struct ath5k_hw *ah, +int +ath5k_hw_get_frame_duration(struct ath5k_hw *ah, enum ieee80211_band band, int len, struct ieee80211_rate *rate, bool shortpre) { int sifs, preamble, plcp_bits, sym_time; @@ -83,7 +120,7 @@ int ath5k_hw_get_frame_duration(struct ath5k_hw *ah, /* Fallback */ if (!ah->ah_bwmode) { __le16 raw_dur = ieee80211_generic_frame_duration(ah->hw, - NULL, len, rate); + NULL, band, len, rate); /* subtract difference between long and short preamble */ dur = le16_to_cpu(raw_dur); @@ -107,11 +144,13 @@ int ath5k_hw_get_frame_duration(struct ath5k_hw *ah, sifs = AR5K_INIT_SIFS_HALF_RATE; preamble *= 2; sym_time *= 2; + bitrate = DIV_ROUND_UP(bitrate, 2); break; case AR5K_BWMODE_5MHZ: sifs = AR5K_INIT_SIFS_QUARTER_RATE; preamble *= 4; sym_time *= 4; + bitrate = DIV_ROUND_UP(bitrate, 4); break; default: sifs = AR5K_INIT_SIFS_DEFAULT_BG; @@ -129,11 +168,11 @@ int ath5k_hw_get_frame_duration(struct ath5k_hw *ah, } /** - * ath5k_hw_get_default_slottime - Get the default slot time for current mode - * + * ath5k_hw_get_default_slottime() - Get the default slot time for current mode * @ah: The &struct ath5k_hw */ -unsigned int ath5k_hw_get_default_slottime(struct ath5k_hw *ah) +unsigned int +ath5k_hw_get_default_slottime(struct ath5k_hw *ah) { struct ieee80211_channel *channel = ah->ah_current_channel; unsigned int slot_time; @@ -160,11 +199,11 @@ unsigned int ath5k_hw_get_default_slottime(struct ath5k_hw *ah) } /** - * ath5k_hw_get_default_sifs - Get the default SIFS for current mode - * + * ath5k_hw_get_default_sifs() - Get the default SIFS for current mode * @ah: The &struct ath5k_hw */ -unsigned int ath5k_hw_get_default_sifs(struct ath5k_hw *ah) +unsigned int +ath5k_hw_get_default_sifs(struct ath5k_hw *ah) { struct ieee80211_channel *channel = ah->ah_current_channel; unsigned int sifs; @@ -191,17 +230,17 @@ unsigned int ath5k_hw_get_default_sifs(struct ath5k_hw *ah) } /** - * ath5k_hw_update_mib_counters - Update MIB counters (mac layer statistics) - * + * ath5k_hw_update_mib_counters() - Update MIB counters (mac layer statistics) * @ah: The &struct ath5k_hw * * Reads MIB counters from PCU and updates sw statistics. Is called after a * MIB interrupt, because one of these counters might have reached their maximum * and triggered the MIB interrupt, to let us read and clear the counter. * - * Is called in interrupt context! + * NOTE: Is called in interrupt context! */ -void ath5k_hw_update_mib_counters(struct ath5k_hw *ah) +void +ath5k_hw_update_mib_counters(struct ath5k_hw *ah) { struct ath5k_statistics *stats = &ah->stats; @@ -219,10 +258,8 @@ void ath5k_hw_update_mib_counters(struct ath5k_hw *ah) \******************/ /** - * ath5k_hw_write_rate_duration - fill rate code to duration table - * - * @ah: the &struct ath5k_hw - * @mode: one of enum ath5k_driver_mode + * ath5k_hw_write_rate_duration() - Fill rate code to duration table + * @ah: The &struct ath5k_hw * * Write the rate code to duration table upon hw reset. This is a helper for * ath5k_hw_pcu_init(). It seems all this is doing is setting an ACK timeout on @@ -236,7 +273,8 @@ void ath5k_hw_update_mib_counters(struct ath5k_hw *ah) * that include all OFDM and CCK rates. * */ -static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah) +static inline void +ath5k_hw_write_rate_duration(struct ath5k_hw *ah) { struct ieee80211_rate *rate; unsigned int i; @@ -266,26 +304,27 @@ static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah) * actual rate for this rate. See mac80211 tx.c * ieee80211_duration() for a brief description of * what rate we should choose to TX ACKs. */ - tx_time = ath5k_hw_get_frame_duration(ah, 10, rate, false); + tx_time = ath5k_hw_get_frame_duration(ah, band, 10, + rate, false); ath5k_hw_reg_write(ah, tx_time, reg); if (!(rate->flags & IEEE80211_RATE_SHORT_PREAMBLE)) continue; - tx_time = ath5k_hw_get_frame_duration(ah, 10, rate, true); + tx_time = ath5k_hw_get_frame_duration(ah, band, 10, rate, true); ath5k_hw_reg_write(ah, tx_time, reg + (AR5K_SET_SHORT_PREAMBLE << 2)); } } /** - * ath5k_hw_set_ack_timeout - Set ACK timeout on PCU - * + * ath5k_hw_set_ack_timeout() - Set ACK timeout on PCU * @ah: The &struct ath5k_hw * @timeout: Timeout in usec */ -static int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout) +static int +ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout) { if (ath5k_hw_clocktoh(ah, AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_ACK)) <= timeout) @@ -298,12 +337,12 @@ static int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout) } /** - * ath5k_hw_set_cts_timeout - Set CTS timeout on PCU - * + * ath5k_hw_set_cts_timeout() - Set CTS timeout on PCU * @ah: The &struct ath5k_hw * @timeout: Timeout in usec */ -static int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout) +static int +ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout) { if (ath5k_hw_clocktoh(ah, AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_CTS)) <= timeout) @@ -321,14 +360,14 @@ static int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout) \*******************/ /** - * ath5k_hw_set_lladdr - Set station id - * + * ath5k_hw_set_lladdr() - Set station id * @ah: The &struct ath5k_hw - * @mac: The card's mac address + * @mac: The card's mac address (array of octets) * * Set station id on hw using the provided mac address */ -int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac) +int +ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac) { struct ath_common *common = ath5k_hw_common(ah); u32 low_id, high_id; @@ -349,14 +388,14 @@ int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac) } /** - * ath5k_hw_set_bssid - Set current BSSID on hw - * + * ath5k_hw_set_bssid() - Set current BSSID on hw * @ah: The &struct ath5k_hw * * Sets the current BSSID and BSSID mask we have from the * common struct into the hardware */ -void ath5k_hw_set_bssid(struct ath5k_hw *ah) +void +ath5k_hw_set_bssid(struct ath5k_hw *ah) { struct ath_common *common = ath5k_hw_common(ah); u16 tim_offset = 0; @@ -389,7 +428,23 @@ void ath5k_hw_set_bssid(struct ath5k_hw *ah) ath5k_hw_enable_pspoll(ah, NULL, 0); } -void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask) +/** + * ath5k_hw_set_bssid_mask() - Filter out bssids we listen + * @ah: The &struct ath5k_hw + * @mask: The BSSID mask to set (array of octets) + * + * BSSID masking is a method used by AR5212 and newer hardware to inform PCU + * which bits of the interface's MAC address should be looked at when trying + * to decide which packets to ACK. In station mode and AP mode with a single + * BSS every bit matters since we lock to only one BSS. In AP mode with + * multiple BSSes (virtual interfaces) not every bit matters because hw must + * accept frames for all BSSes and so we tweak some bits of our mac address + * in order to have multiple BSSes. + * + * For more information check out ../hw.c of the common ath module. + */ +void +ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask) { struct ath_common *common = ath5k_hw_common(ah); @@ -400,18 +455,21 @@ void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask) ath_hw_setbssidmask(common); } -/* - * Set multicast filter +/** + * ath5k_hw_set_mcast_filter() - Set multicast filter + * @ah: The &struct ath5k_hw + * @filter0: Lower 32bits of muticast filter + * @filter1: Higher 16bits of multicast filter */ -void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1) +void +ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1) { ath5k_hw_reg_write(ah, filter0, AR5K_MCAST_FILTER0); ath5k_hw_reg_write(ah, filter1, AR5K_MCAST_FILTER1); } /** - * ath5k_hw_get_rx_filter - Get current rx filter - * + * ath5k_hw_get_rx_filter() - Get current rx filter * @ah: The &struct ath5k_hw * * Returns the RX filter by reading rx filter and @@ -420,7 +478,8 @@ void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1) * and pass to the driver. For a list of frame types * check out reg.h. */ -u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah) +u32 +ath5k_hw_get_rx_filter(struct ath5k_hw *ah) { u32 data, filter = 0; @@ -440,8 +499,7 @@ u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah) } /** - * ath5k_hw_set_rx_filter - Set rx filter - * + * ath5k_hw_set_rx_filter() - Set rx filter * @ah: The &struct ath5k_hw * @filter: RX filter mask (see reg.h) * @@ -449,7 +507,8 @@ u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah) * register on 5212 and newer chips so that we have proper PHY * error reporting. */ -void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter) +void +ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter) { u32 data = 0; @@ -493,13 +552,13 @@ void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter) #define ATH5K_MAX_TSF_READ 10 /** - * ath5k_hw_get_tsf64 - Get the full 64bit TSF - * + * ath5k_hw_get_tsf64() - Get the full 64bit TSF * @ah: The &struct ath5k_hw * * Returns the current TSF */ -u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah) +u64 +ath5k_hw_get_tsf64(struct ath5k_hw *ah) { u32 tsf_lower, tsf_upper1, tsf_upper2; int i; @@ -536,28 +595,30 @@ u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah) return ((u64)tsf_upper1 << 32) | tsf_lower; } +#undef ATH5K_MAX_TSF_READ + /** - * ath5k_hw_set_tsf64 - Set a new 64bit TSF - * + * ath5k_hw_set_tsf64() - Set a new 64bit TSF * @ah: The &struct ath5k_hw * @tsf64: The new 64bit TSF * * Sets the new TSF */ -void ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64) +void +ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64) { ath5k_hw_reg_write(ah, tsf64 & 0xffffffff, AR5K_TSF_L32); ath5k_hw_reg_write(ah, (tsf64 >> 32) & 0xffffffff, AR5K_TSF_U32); } /** - * ath5k_hw_reset_tsf - Force a TSF reset - * + * ath5k_hw_reset_tsf() - Force a TSF reset * @ah: The &struct ath5k_hw * * Forces a TSF reset on PCU */ -void ath5k_hw_reset_tsf(struct ath5k_hw *ah) +void +ath5k_hw_reset_tsf(struct ath5k_hw *ah) { u32 val; @@ -573,10 +634,17 @@ void ath5k_hw_reset_tsf(struct ath5k_hw *ah) ath5k_hw_reg_write(ah, val, AR5K_BEACON); } -/* - * Initialize beacon timers +/** + * ath5k_hw_init_beacon_timers() - Initialize beacon timers + * @ah: The &struct ath5k_hw + * @next_beacon: Next TBTT + * @interval: Current beacon interval + * + * This function is used to initialize beacon timers based on current + * operation mode and settings. */ -void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval) +void +ath5k_hw_init_beacon_timers(struct ath5k_hw *ah, u32 next_beacon, u32 interval) { u32 timer1, timer2, timer3; @@ -655,8 +723,7 @@ void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval) } /** - * ath5k_check_timer_win - Check if timer B is timer A + window - * + * ath5k_check_timer_win() - Check if timer B is timer A + window * @a: timer a (before b) * @b: timer b (after a) * @window: difference between a and b @@ -686,12 +753,11 @@ ath5k_check_timer_win(int a, int b, int window, int intval) } /** - * ath5k_hw_check_beacon_timers - Check if the beacon timers are correct - * + * ath5k_hw_check_beacon_timers() - Check if the beacon timers are correct * @ah: The &struct ath5k_hw * @intval: beacon interval * - * This is a workaround for IBSS mode: + * This is a workaround for IBSS mode * * The need for this function arises from the fact that we have 4 separate * HW timer registers (TIMER0 - TIMER3), which are closely related to the @@ -746,14 +812,14 @@ ath5k_hw_check_beacon_timers(struct ath5k_hw *ah, int intval) } /** - * ath5k_hw_set_coverage_class - Set IEEE 802.11 coverage class - * + * ath5k_hw_set_coverage_class() - Set IEEE 802.11 coverage class * @ah: The &struct ath5k_hw * @coverage_class: IEEE 802.11 coverage class number * * Sets IFS intervals and ACK/CTS timeouts for given coverage class. */ -void ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class) +void +ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class) { /* As defined by IEEE 802.11-2007 17.3.8.6 */ int slot_time = ath5k_hw_get_default_slottime(ah) + 3 * coverage_class; @@ -772,8 +838,7 @@ void ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class) \***************************/ /** - * ath5k_hw_start_rx_pcu - Start RX engine - * + * ath5k_hw_start_rx_pcu() - Start RX engine * @ah: The &struct ath5k_hw * * Starts RX engine on PCU so that hw can process RXed frames @@ -781,32 +846,33 @@ void ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class) * * NOTE: RX DMA should be already enabled using ath5k_hw_start_rx_dma */ -void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah) +void +ath5k_hw_start_rx_pcu(struct ath5k_hw *ah) { AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX); } /** - * at5k_hw_stop_rx_pcu - Stop RX engine - * + * at5k_hw_stop_rx_pcu() - Stop RX engine * @ah: The &struct ath5k_hw * * Stops RX engine on PCU */ -void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah) +void +ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah) { AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX); } /** - * ath5k_hw_set_opmode - Set PCU operating mode - * + * ath5k_hw_set_opmode() - Set PCU operating mode * @ah: The &struct ath5k_hw - * @op_mode: &enum nl80211_iftype operating mode + * @op_mode: One of enum nl80211_iftype * * Configure PCU for the various operating modes (AP/STA etc) */ -int ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype op_mode) +int +ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype op_mode) { struct ath_common *common = ath5k_hw_common(ah); u32 pcu_reg, beacon_reg, low_id, high_id; @@ -873,8 +939,17 @@ int ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype op_mode) return 0; } -void ath5k_hw_pcu_init(struct ath5k_hw *ah, enum nl80211_iftype op_mode, - u8 mode) +/** + * ath5k_hw_pcu_init() - Initialize PCU + * @ah: The &struct ath5k_hw + * @op_mode: One of enum nl80211_iftype + * @mode: One of enum ath5k_driver_mode + * + * This function is used to initialize PCU by setting current + * operation mode and various other settings. + */ +void +ath5k_hw_pcu_init(struct ath5k_hw *ah, enum nl80211_iftype op_mode) { /* Set bssid and bssid mask */ ath5k_hw_set_bssid(ah); diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index 01cb72de44c..0fce1c76638 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -1,6 +1,4 @@ /* - * PHY functions - * * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org> * Copyright (c) 2006-2009 Nick Kossifidis <mickflemm@gmail.com> * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com> @@ -20,6 +18,12 @@ * */ +/***********************\ +* PHY related functions * +\***********************/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/delay.h> #include <linux/slab.h> #include <asm/unaligned.h> @@ -31,14 +35,53 @@ #include "../regd.h" +/** + * DOC: PHY related functions + * + * Here we handle the low-level functions related to baseband + * and analog frontend (RF) parts. This is by far the most complex + * part of the hw code so make sure you know what you are doing. + * + * Here is a list of what this is all about: + * + * - Channel setting/switching + * + * - Automatic Gain Control (AGC) calibration + * + * - Noise Floor calibration + * + * - I/Q imbalance calibration (QAM correction) + * + * - Calibration due to thermal changes (gain_F) + * + * - Spur noise mitigation + * + * - RF/PHY initialization for the various operating modes and bwmodes + * + * - Antenna control + * + * - TX power control per channel/rate/packet type + * + * Also have in mind we never got documentation for most of these + * functions, what we have comes mostly from Atheros's code, reverse + * engineering and patent docs/presentations etc. + */ + + /******************\ * Helper functions * \******************/ -/* - * Get the PHY Chip revision +/** + * ath5k_hw_radio_revision() - Get the PHY Chip revision + * @ah: The &struct ath5k_hw + * @band: One of enum ieee80211_band + * + * Returns the revision number of a 2GHz, 5GHz or single chip + * radio. */ -u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, enum ieee80211_band band) +u16 +ath5k_hw_radio_revision(struct ath5k_hw *ah, enum ieee80211_band band) { unsigned int i; u32 srev; @@ -58,7 +101,7 @@ u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, enum ieee80211_band band) return 0; } - mdelay(2); + usleep_range(2000, 2500); /* ...wait until PHY is ready and read the selected radio revision */ ath5k_hw_reg_write(ah, 0x00001c16, AR5K_PHY(0x34)); @@ -67,7 +110,7 @@ u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, enum ieee80211_band band) ath5k_hw_reg_write(ah, 0x00010000, AR5K_PHY(0x20)); if (ah->ah_version == AR5K_AR5210) { - srev = ath5k_hw_reg_read(ah, AR5K_PHY(256) >> 28) & 0xf; + srev = (ath5k_hw_reg_read(ah, AR5K_PHY(256)) >> 28) & 0xf; ret = (u16)ath5k_hw_bitswap(srev, 4) + 1; } else { srev = (ath5k_hw_reg_read(ah, AR5K_PHY(0x100)) >> 24) & 0xff; @@ -81,10 +124,16 @@ u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, enum ieee80211_band band) return ret; } -/* - * Check if a channel is supported +/** + * ath5k_channel_ok() - Check if a channel is supported by the hw + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * + * Note: We don't do any regulatory domain checks here, it's just + * a sanity check. */ -bool ath5k_channel_ok(struct ath5k_hw *ah, struct ieee80211_channel *channel) +bool +ath5k_channel_ok(struct ath5k_hw *ah, struct ieee80211_channel *channel) { u16 freq = channel->center_freq; @@ -101,7 +150,13 @@ bool ath5k_channel_ok(struct ath5k_hw *ah, struct ieee80211_channel *channel) return false; } -bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah, +/** + * ath5k_hw_chan_has_spur_noise() - Check if channel is sensitive to spur noise + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + */ +bool +ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah, struct ieee80211_channel *channel) { u8 refclk_freq; @@ -122,11 +177,20 @@ bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah, return false; } -/* - * Used to modify RF Banks before writing them to AR5K_RF_BUFFER +/** + * ath5k_hw_rfb_op() - Perform an operation on the given RF Buffer + * @ah: The &struct ath5k_hw + * @rf_regs: The struct ath5k_rf_reg + * @val: New value + * @reg_id: RF register ID + * @set: Indicate we need to swap data + * + * This is an internal function used to modify RF Banks before + * writing them to AR5K_RF_BUFFER. Check out rfbuffer.h for more + * infos. */ -static unsigned int ath5k_hw_rfb_op(struct ath5k_hw *ah, - const struct ath5k_rf_reg *rf_regs, +static unsigned int +ath5k_hw_rfb_op(struct ath5k_hw *ah, const struct ath5k_rf_reg *rf_regs, u32 val, u8 reg_id, bool set) { const struct ath5k_rf_reg *rfreg = NULL; @@ -204,8 +268,7 @@ static unsigned int ath5k_hw_rfb_op(struct ath5k_hw *ah, } /** - * ath5k_hw_write_ofdm_timings - set OFDM timings on AR5212 - * + * ath5k_hw_write_ofdm_timings() - set OFDM timings on AR5212 * @ah: the &struct ath5k_hw * @channel: the currently set channel upon reset * @@ -216,10 +279,11 @@ static unsigned int ath5k_hw_rfb_op(struct ath5k_hw *ah, * mantissa and provide these values on hw. * * For more infos i think this patent is related - * http://www.freepatentsonline.com/7184495.html + * "http://www.freepatentsonline.com/7184495.html" */ -static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah, - struct ieee80211_channel *channel) +static inline int +ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah, + struct ieee80211_channel *channel) { /* Get exponent and mantissa and set it */ u32 coef_scaled, coef_exp, coef_man, @@ -278,6 +342,10 @@ static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah, return 0; } +/** + * ath5k_hw_phy_disable() - Disable PHY + * @ah: The &struct ath5k_hw + */ int ath5k_hw_phy_disable(struct ath5k_hw *ah) { /*Just a try M.F.*/ @@ -286,10 +354,13 @@ int ath5k_hw_phy_disable(struct ath5k_hw *ah) return 0; } -/* - * Wait for synth to settle +/** + * ath5k_hw_wait_for_synth() - Wait for synth to settle + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel */ -static void ath5k_hw_wait_for_synth(struct ath5k_hw *ah, +static void +ath5k_hw_wait_for_synth(struct ath5k_hw *ah, struct ieee80211_channel *channel) { /* @@ -308,9 +379,9 @@ static void ath5k_hw_wait_for_synth(struct ath5k_hw *ah, delay = delay << 2; /* XXX: /2 on turbo ? Let's be safe * for now */ - udelay(100 + delay); + usleep_range(100 + delay, 100 + (2 * delay)); } else { - mdelay(1); + usleep_range(1000, 1500); } } @@ -319,7 +390,9 @@ static void ath5k_hw_wait_for_synth(struct ath5k_hw *ah, * RF Gain optimization * \**********************/ -/* +/** + * DOC: RF Gain optimization + * * This code is used to optimize RF gain on different environments * (temperature mostly) based on feedback from a power detector. * @@ -328,22 +401,22 @@ static void ath5k_hw_wait_for_synth(struct ath5k_hw *ah, * no gain optimization ladder-. * * For more infos check out this patent doc - * http://www.freepatentsonline.com/7400691.html + * "http://www.freepatentsonline.com/7400691.html" * * This paper describes power drops as seen on the receiver due to * probe packets - * http://www.cnri.dit.ie/publications/ICT08%20-%20Practical%20Issues - * %20of%20Power%20Control.pdf + * "http://www.cnri.dit.ie/publications/ICT08%20-%20Practical%20Issues + * %20of%20Power%20Control.pdf" * * And this is the MadWiFi bug entry related to the above - * http://madwifi-project.org/ticket/1659 + * "http://madwifi-project.org/ticket/1659" * with various measurements and diagrams - * - * TODO: Deal with power drops due to probes by setting an appropriate - * tx power on the probe packets ! Make this part of the calibration process. */ -/* Initialize ah_gain during attach */ +/** + * ath5k_hw_rfgain_opt_init() - Initialize ah_gain during attach + * @ah: The &struct ath5k_hw + */ int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah) { /* Initialize the gain optimization values */ @@ -367,17 +440,21 @@ int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah) return 0; } -/* Schedule a gain probe check on the next transmitted packet. +/** + * ath5k_hw_request_rfgain_probe() - Request a PAPD probe packet + * @ah: The &struct ath5k_hw + * + * Schedules a gain probe check on the next transmitted packet. * That means our next packet is going to be sent with lower * tx power and a Peak to Average Power Detector (PAPD) will try * to measure the gain. * - * XXX: How about forcing a tx packet (bypassing PCU arbitrator etc) + * TODO: Force a tx packet (bypassing PCU arbitrator etc) * just after we enable the probe so that we don't mess with - * standard traffic ? Maybe it's time to use sw interrupts and - * a probe tasklet !!! + * standard traffic. */ -static void ath5k_hw_request_rfgain_probe(struct ath5k_hw *ah) +static void +ath5k_hw_request_rfgain_probe(struct ath5k_hw *ah) { /* Skip if gain calibration is inactive or @@ -395,9 +472,15 @@ static void ath5k_hw_request_rfgain_probe(struct ath5k_hw *ah) } -/* Calculate gain_F measurement correction - * based on the current step for RF5112 rev. 2 */ -static u32 ath5k_hw_rf_gainf_corr(struct ath5k_hw *ah) +/** + * ath5k_hw_rf_gainf_corr() - Calculate Gain_F measurement correction + * @ah: The &struct ath5k_hw + * + * Calculate Gain_F measurement correction + * based on the current step for RF5112 rev. 2 + */ +static u32 +ath5k_hw_rf_gainf_corr(struct ath5k_hw *ah) { u32 mix, step; u32 *rf; @@ -450,11 +533,19 @@ static u32 ath5k_hw_rf_gainf_corr(struct ath5k_hw *ah) return ah->ah_gain.g_f_corr; } -/* Check if current gain_F measurement is in the range of our +/** + * ath5k_hw_rf_check_gainf_readback() - Validate Gain_F feedback from detector + * @ah: The &struct ath5k_hw + * + * Check if current gain_F measurement is in the range of our * power detector windows. If we get a measurement outside range * we know it's not accurate (detectors can't measure anything outside - * their detection window) so we must ignore it */ -static bool ath5k_hw_rf_check_gainf_readback(struct ath5k_hw *ah) + * their detection window) so we must ignore it. + * + * Returns true if readback was O.K. or false on failure + */ +static bool +ath5k_hw_rf_check_gainf_readback(struct ath5k_hw *ah) { const struct ath5k_rf_reg *rf_regs; u32 step, mix_ovr, level[4]; @@ -506,9 +597,15 @@ static bool ath5k_hw_rf_check_gainf_readback(struct ath5k_hw *ah) ah->ah_gain.g_current <= level[3]); } -/* Perform gain_F adjustment by choosing the right set - * of parameters from RF gain optimization ladder */ -static s8 ath5k_hw_rf_gainf_adjust(struct ath5k_hw *ah) +/** + * ath5k_hw_rf_gainf_adjust() - Perform Gain_F adjustment + * @ah: The &struct ath5k_hw + * + * Choose the right target gain based on current gain + * and RF gain optimization ladder + */ +static s8 +ath5k_hw_rf_gainf_adjust(struct ath5k_hw *ah) { const struct ath5k_gain_opt *go; const struct ath5k_gain_opt_step *g_step; @@ -572,13 +669,18 @@ done: return ret; } -/* Main callback for thermal RF gain calibration engine +/** + * ath5k_hw_gainf_calibrate() - Do a gain_F calibration + * @ah: The &struct ath5k_hw + * + * Main callback for thermal RF gain calibration engine * Check for a new gain reading and schedule an adjustment * if needed. * - * TODO: Use sw interrupt to schedule reset if gain_F needs - * adjustment */ -enum ath5k_rfgain ath5k_hw_gainf_calibrate(struct ath5k_hw *ah) + * Returns one of enum ath5k_rfgain codes + */ +enum ath5k_rfgain +ath5k_hw_gainf_calibrate(struct ath5k_hw *ah) { u32 data, type; struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; @@ -638,10 +740,18 @@ done: return ah->ah_gain.g_state; } -/* Write initial RF gain table to set the RF sensitivity - * this one works on all RF chips and has nothing to do - * with gain_F calibration */ -static int ath5k_hw_rfgain_init(struct ath5k_hw *ah, enum ieee80211_band band) +/** + * ath5k_hw_rfgain_init() - Write initial RF gain settings to hw + * @ah: The &struct ath5k_hw + * @band: One of enum ieee80211_band + * + * Write initial RF gain table to set the RF sensitivity. + * + * NOTE: This one works on all RF chips and has nothing to do + * with Gain_F calibration + */ +static int +ath5k_hw_rfgain_init(struct ath5k_hw *ah, enum ieee80211_band band) { const struct ath5k_ini_rfgain *ath5k_rfg; unsigned int i, size, index; @@ -688,16 +798,23 @@ static int ath5k_hw_rfgain_init(struct ath5k_hw *ah, enum ieee80211_band band) } - /********************\ * RF Registers setup * \********************/ -/* - * Setup RF registers by writing RF buffer on hw +/** + * ath5k_hw_rfregs_init() - Initialize RF register settings + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * @mode: One of enum ath5k_driver_mode + * + * Setup RF registers by writing RF buffer on hw. For + * more infos on this, check out rfbuffer.h */ -static int ath5k_hw_rfregs_init(struct ath5k_hw *ah, - struct ieee80211_channel *channel, unsigned int mode) +static int +ath5k_hw_rfregs_init(struct ath5k_hw *ah, + struct ieee80211_channel *channel, + unsigned int mode) { const struct ath5k_rf_reg *rf_regs; const struct ath5k_ini_rfbuffer *ini_rfb; @@ -1055,19 +1172,18 @@ static int ath5k_hw_rfregs_init(struct ath5k_hw *ah, PHY/RF channel functions \**************************/ -/* - * Conversion needed for RF5110 +/** + * ath5k_hw_rf5110_chan2athchan() - Convert channel freq on RF5110 + * @channel: The &struct ieee80211_channel + * + * Map channel frequency to IEEE channel number and convert it + * to an internal channel value used by the RF5110 chipset. */ -static u32 ath5k_hw_rf5110_chan2athchan(struct ieee80211_channel *channel) +static u32 +ath5k_hw_rf5110_chan2athchan(struct ieee80211_channel *channel) { u32 athchan; - /* - * Convert IEEE channel/MHz to an internal channel value used - * by the AR5210 chipset. This has not been verified with - * newer chipsets like the AR5212A who have a completely - * different RF/PHY part. - */ athchan = (ath5k_hw_bitswap( (ieee80211_frequency_to_channel( channel->center_freq) - 24) / 2, 5) @@ -1075,10 +1191,13 @@ static u32 ath5k_hw_rf5110_chan2athchan(struct ieee80211_channel *channel) return athchan; } -/* - * Set channel on RF5110 +/** + * ath5k_hw_rf5110_channel() - Set channel frequency on RF5110 + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel */ -static int ath5k_hw_rf5110_channel(struct ath5k_hw *ah, +static int +ath5k_hw_rf5110_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel) { u32 data; @@ -1089,15 +1208,23 @@ static int ath5k_hw_rf5110_channel(struct ath5k_hw *ah, data = ath5k_hw_rf5110_chan2athchan(channel); ath5k_hw_reg_write(ah, data, AR5K_RF_BUFFER); ath5k_hw_reg_write(ah, 0, AR5K_RF_BUFFER_CONTROL_0); - mdelay(1); + usleep_range(1000, 1500); return 0; } -/* - * Conversion needed for 5111 +/** + * ath5k_hw_rf5111_chan2athchan() - Handle 2GHz channels on RF5111/2111 + * @ieee: IEEE channel number + * @athchan: The &struct ath5k_athchan_2ghz + * + * In order to enable the RF2111 frequency converter on RF5111/2111 setups + * we need to add some offsets and extra flags to the data values we pass + * on to the PHY. So for every 2GHz channel this function gets called + * to do the conversion. */ -static int ath5k_hw_rf5111_chan2athchan(unsigned int ieee, +static int +ath5k_hw_rf5111_chan2athchan(unsigned int ieee, struct ath5k_athchan_2ghz *athchan) { int channel; @@ -1123,10 +1250,13 @@ static int ath5k_hw_rf5111_chan2athchan(unsigned int ieee, return 0; } -/* - * Set channel on 5111 +/** + * ath5k_hw_rf5111_channel() - Set channel frequency on RF5111/2111 + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel */ -static int ath5k_hw_rf5111_channel(struct ath5k_hw *ah, +static int +ath5k_hw_rf5111_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel) { struct ath5k_athchan_2ghz ath5k_channel_2ghz; @@ -1171,10 +1301,20 @@ static int ath5k_hw_rf5111_channel(struct ath5k_hw *ah, return 0; } -/* - * Set channel on 5112 and newer +/** + * ath5k_hw_rf5112_channel() - Set channel frequency on 5112 and newer + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * + * On RF5112/2112 and newer we don't need to do any conversion. + * We pass the frequency value after a few modifications to the + * chip directly. + * + * NOTE: Make sure channel frequency given is within our range or else + * we might damage the chip ! Use ath5k_channel_ok before calling this one. */ -static int ath5k_hw_rf5112_channel(struct ath5k_hw *ah, +static int +ath5k_hw_rf5112_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel) { u32 data, data0, data1, data2; @@ -1183,17 +1323,37 @@ static int ath5k_hw_rf5112_channel(struct ath5k_hw *ah, data = data0 = data1 = data2 = 0; c = channel->center_freq; + /* My guess based on code: + * 2GHz RF has 2 synth modes, one with a Local Oscillator + * at 2224Hz and one with a LO at 2192Hz. IF is 1520Hz + * (3040/2). data0 is used to set the PLL divider and data1 + * selects synth mode. */ if (c < 4800) { + /* Channel 14 and all frequencies with 2Hz spacing + * below/above (non-standard channels) */ if (!((c - 2224) % 5)) { + /* Same as (c - 2224) / 5 */ data0 = ((2 * (c - 704)) - 3040) / 10; data1 = 1; + /* Channel 1 and all frequencies with 5Hz spacing + * below/above (standard channels without channel 14) */ } else if (!((c - 2192) % 5)) { + /* Same as (c - 2192) / 5 */ data0 = ((2 * (c - 672)) - 3040) / 10; data1 = 0; } else return -EINVAL; data0 = ath5k_hw_bitswap((data0 << 2) & 0xff, 8); + /* This is more complex, we have a single synthesizer with + * 4 reference clock settings (?) based on frequency spacing + * and set using data2. LO is at 4800Hz and data0 is again used + * to set some divider. + * + * NOTE: There is an old atheros presentation at Stanford + * that mentions a method called dual direct conversion + * with 1GHz sliding IF for RF5110. Maybe that's what we + * have here, or an updated version. */ } else if ((c % 5) != 2 || c > 5435) { if (!(c % 20) && c >= 5120) { data0 = ath5k_hw_bitswap(((c - 4800) / 20 << 2), 8); @@ -1219,10 +1379,16 @@ static int ath5k_hw_rf5112_channel(struct ath5k_hw *ah, return 0; } -/* - * Set the channel on the RF2425 +/** + * ath5k_hw_rf2425_channel() - Set channel frequency on RF2425 + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * + * AR2425/2417 have a different 2GHz RF so code changes + * a little bit from RF5112. */ -static int ath5k_hw_rf2425_channel(struct ath5k_hw *ah, +static int +ath5k_hw_rf2425_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel) { u32 data, data0, data2; @@ -1258,10 +1424,16 @@ static int ath5k_hw_rf2425_channel(struct ath5k_hw *ah, return 0; } -/* - * Set a channel on the radio chip +/** + * ath5k_hw_channel() - Set a channel on the radio chip + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * + * This is the main function called to set a channel on the + * radio chip based on the radio chip version. */ -static int ath5k_hw_channel(struct ath5k_hw *ah, +static int +ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel) { int ret; @@ -1313,11 +1485,46 @@ static int ath5k_hw_channel(struct ath5k_hw *ah, return 0; } + /*****************\ PHY calibration \*****************/ -static s32 ath5k_hw_read_measured_noise_floor(struct ath5k_hw *ah) +/** + * DOC: PHY Calibration routines + * + * Noise floor calibration: When we tell the hardware to + * perform a noise floor calibration by setting the + * AR5K_PHY_AGCCTL_NF bit on AR5K_PHY_AGCCTL, it will periodically + * sample-and-hold the minimum noise level seen at the antennas. + * This value is then stored in a ring buffer of recently measured + * noise floor values so we have a moving window of the last few + * samples. The median of the values in the history is then loaded + * into the hardware for its own use for RSSI and CCA measurements. + * This type of calibration doesn't interfere with traffic. + * + * AGC calibration: When we tell the hardware to perform + * an AGC (Automatic Gain Control) calibration by setting the + * AR5K_PHY_AGCCTL_CAL, hw disconnects the antennas and does + * a calibration on the DC offsets of ADCs. During this period + * rx/tx gets disabled so we have to deal with it on the driver + * part. + * + * I/Q calibration: When we tell the hardware to perform + * an I/Q calibration, it tries to correct I/Q imbalance and + * fix QAM constellation by sampling data from rxed frames. + * It doesn't interfere with traffic. + * + * For more infos on AGC and I/Q calibration check out patent doc + * #03/094463. + */ + +/** + * ath5k_hw_read_measured_noise_floor() - Read measured NF from hw + * @ah: The &struct ath5k_hw + */ +static s32 +ath5k_hw_read_measured_noise_floor(struct ath5k_hw *ah) { s32 val; @@ -1325,7 +1532,12 @@ static s32 ath5k_hw_read_measured_noise_floor(struct ath5k_hw *ah) return sign_extend32(AR5K_REG_MS(val, AR5K_PHY_NF_MINCCA_PWR), 8); } -void ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah) +/** + * ath5k_hw_init_nfcal_hist() - Initialize NF calibration history buffer + * @ah: The &struct ath5k_hw + */ +void +ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah) { int i; @@ -1334,6 +1546,11 @@ void ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah) ah->ah_nfcal_hist.nfval[i] = AR5K_TUNE_CCA_MAX_GOOD_VALUE; } +/** + * ath5k_hw_update_nfcal_hist() - Update NF calibration history buffer + * @ah: The &struct ath5k_hw + * @noise_floor: The NF we got from hw + */ static void ath5k_hw_update_nfcal_hist(struct ath5k_hw *ah, s16 noise_floor) { struct ath5k_nfcal_hist *hist = &ah->ah_nfcal_hist; @@ -1341,7 +1558,12 @@ static void ath5k_hw_update_nfcal_hist(struct ath5k_hw *ah, s16 noise_floor) hist->nfval[hist->index] = noise_floor; } -static s16 ath5k_hw_get_median_noise_floor(struct ath5k_hw *ah) +/** + * ath5k_hw_get_median_noise_floor() - Get median NF from history buffer + * @ah: The &struct ath5k_hw + */ +static s16 +ath5k_hw_get_median_noise_floor(struct ath5k_hw *ah) { s16 sort[ATH5K_NF_CAL_HIST_MAX]; s16 tmp; @@ -1364,18 +1586,16 @@ static s16 ath5k_hw_get_median_noise_floor(struct ath5k_hw *ah) return sort[(ATH5K_NF_CAL_HIST_MAX - 1) / 2]; } -/* - * When we tell the hardware to perform a noise floor calibration - * by setting the AR5K_PHY_AGCCTL_NF bit, it will periodically - * sample-and-hold the minimum noise level seen at the antennas. - * This value is then stored in a ring buffer of recently measured - * noise floor values so we have a moving window of the last few - * samples. +/** + * ath5k_hw_update_noise_floor() - Update NF on hardware + * @ah: The &struct ath5k_hw * - * The median of the values in the history is then loaded into the - * hardware for its own use for RSSI and CCA measurements. + * This is the main function we call to perform a NF calibration, + * it reads NF from hardware, calculates the median and updates + * NF on hw. */ -void ath5k_hw_update_noise_floor(struct ath5k_hw *ah) +void +ath5k_hw_update_noise_floor(struct ath5k_hw *ah) { struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; u32 val; @@ -1390,7 +1610,9 @@ void ath5k_hw_update_noise_floor(struct ath5k_hw *ah) return; } - ee_mode = ath5k_eeprom_mode_from_channel(ah->ah_current_channel); + ah->ah_cal_mask |= AR5K_CALIBRATION_NF; + + ee_mode = ath5k_eeprom_mode_from_channel(ah, ah->ah_current_channel); /* completed NF calibration, test threshold */ nf = ath5k_hw_read_measured_noise_floor(ah); @@ -1434,20 +1656,29 @@ void ath5k_hw_update_noise_floor(struct ath5k_hw *ah) ah->ah_noise_floor = nf; + ah->ah_cal_mask &= ~AR5K_CALIBRATION_NF; + ATH5K_DBG(ah, ATH5K_DEBUG_CALIBRATE, "noise floor calibrated: %d\n", nf); } -/* - * Perform a PHY calibration on RF5110 - * -Fix BPSK/QAM Constellation (I/Q correction) +/** + * ath5k_hw_rf5110_calibrate() - Perform a PHY calibration on RF5110 + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * + * Do a complete PHY calibration (AGC + NF + I/Q) on RF5110 */ -static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah, +static int +ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel) { u32 phy_sig, phy_agc, phy_sat, beacon; int ret; + if (!(ah->ah_cal_mask & AR5K_CALIBRATION_FULL)) + return 0; + /* * Disable beacons and RX/TX queues, wait */ @@ -1456,7 +1687,7 @@ static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah, beacon = ath5k_hw_reg_read(ah, AR5K_BEACON_5210); ath5k_hw_reg_write(ah, beacon & ~AR5K_BEACON_ENABLE, AR5K_BEACON_5210); - mdelay(2); + usleep_range(2000, 2500); /* * Set the channel (with AGC turned off) @@ -1469,7 +1700,7 @@ static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah, * Activate PHY and wait */ ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT); - mdelay(1); + usleep_range(1000, 1500); AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_AGC, AR5K_PHY_AGC_DISABLE); @@ -1506,7 +1737,7 @@ static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah, ath5k_hw_reg_write(ah, AR5K_PHY_RFSTG_DISABLE, AR5K_PHY_RFSTG); AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_AGC, AR5K_PHY_AGC_DISABLE); - mdelay(1); + usleep_range(1000, 1500); /* * Enable calibration and wait until completion @@ -1537,8 +1768,9 @@ static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah, return 0; } -/* - * Perform I/Q calibration on RF5111/5112 and newer chips +/** + * ath5k_hw_rf511x_iq_calibrate() - Perform I/Q calibration on RF5111 and newer + * @ah: The &struct ath5k_hw */ static int ath5k_hw_rf511x_iq_calibrate(struct ath5k_hw *ah) @@ -1547,12 +1779,19 @@ ath5k_hw_rf511x_iq_calibrate(struct ath5k_hw *ah) s32 iq_corr, i_coff, i_coffd, q_coff, q_coffd; int i; - if (!ah->ah_calibration || - ath5k_hw_reg_read(ah, AR5K_PHY_IQ) & AR5K_PHY_IQ_RUN) - return 0; + /* Skip if I/Q calibration is not needed or if it's still running */ + if (!ah->ah_iq_cal_needed) + return -EINVAL; + else if (ath5k_hw_reg_read(ah, AR5K_PHY_IQ) & AR5K_PHY_IQ_RUN) { + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_CALIBRATE, + "I/Q calibration still running"); + return -EBUSY; + } /* Calibration has finished, get the results and re-run */ - /* work around empty results which can apparently happen on 5212 */ + + /* Work around for empty results which can apparently happen on 5212: + * Read registers up to 10 times until we get both i_pr and q_pwr */ for (i = 0; i <= 10; i++) { iq_corr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_CORR); i_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_I); @@ -1570,9 +1809,13 @@ ath5k_hw_rf511x_iq_calibrate(struct ath5k_hw *ah) else q_coffd = q_pwr >> 7; - /* protect against divide by 0 and loss of sign bits */ + /* In case i_coffd became zero, cancel calibration + * not only it's too small, it'll also result a divide + * by zero later on. */ if (i_coffd == 0 || q_coffd < 2) - return 0; + return -ECANCELED; + + /* Protect against loss of sign bits */ i_coff = (-iq_corr) / i_coffd; i_coff = clamp(i_coff, -32, 31); /* signed 6 bit */ @@ -1601,10 +1844,17 @@ ath5k_hw_rf511x_iq_calibrate(struct ath5k_hw *ah) return 0; } -/* - * Perform a PHY calibration +/** + * ath5k_hw_phy_calibrate() - Perform a PHY calibration + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * + * The main function we call from above to perform + * a short or full PHY calibration based on RF chip + * and current channel */ -int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, +int +ath5k_hw_phy_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel) { int ret; @@ -1613,11 +1863,28 @@ int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, return ath5k_hw_rf5110_calibrate(ah, channel); ret = ath5k_hw_rf511x_iq_calibrate(ah); + if (ret) { + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_CALIBRATE, + "No I/Q correction performed (%uMHz)\n", + channel->center_freq); - if ((ah->ah_radio == AR5K_RF5111 || ah->ah_radio == AR5K_RF5112) && - (channel->hw_value != AR5K_MODE_11B)) + /* Happens all the time if there is not much + * traffic, consider it normal behaviour. */ + ret = 0; + } + + /* On full calibration request a PAPD probe for + * gainf calibration if needed */ + if ((ah->ah_cal_mask & AR5K_CALIBRATION_FULL) && + (ah->ah_radio == AR5K_RF5111 || + ah->ah_radio == AR5K_RF5112) && + channel->hw_value != AR5K_MODE_11B) ath5k_hw_request_rfgain_probe(ah); + /* Update noise floor */ + if (!(ah->ah_cal_mask & AR5K_CALIBRATION_NF)) + ath5k_hw_update_noise_floor(ah); + return ret; } @@ -1626,6 +1893,16 @@ int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, * Spur mitigation functions * \***************************/ +/** + * ath5k_hw_set_spur_mitigation_filter() - Configure SPUR filter + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * + * This function gets called during PHY initialization to + * configure the spur filter for the given channel. Spur is noise + * generated due to "reflection" effects, for more information on this + * method check out patent US7643810 + */ static void ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah, struct ieee80211_channel *channel) @@ -1698,11 +1975,13 @@ ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah, spur_delta_phase = (spur_offset << 18) / 25; spur_freq_sigma_delta = (spur_delta_phase >> 10); symbol_width = AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz / 2; + break; case AR5K_BWMODE_5MHZ: /* Both sample_freq and chip_freq are 10MHz (?) */ spur_delta_phase = (spur_offset << 19) / 25; spur_freq_sigma_delta = (spur_delta_phase >> 10); symbol_width = AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz / 4; + break; default: if (channel->band == IEEE80211_BAND_5GHZ) { /* Both sample_freq and chip_freq are 40MHz */ @@ -1865,15 +2144,73 @@ ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah, * Antenna control * \*****************/ -static void /*TODO:Boundary check*/ +/** + * DOC: Antenna control + * + * Hw supports up to 14 antennas ! I haven't found any card that implements + * that. The maximum number of antennas I've seen is up to 4 (2 for 2GHz and 2 + * for 5GHz). Antenna 1 (MAIN) should be omnidirectional, 2 (AUX) + * omnidirectional or sectorial and antennas 3-14 sectorial (or directional). + * + * We can have a single antenna for RX and multiple antennas for TX. + * RX antenna is our "default" antenna (usually antenna 1) set on + * DEFAULT_ANTENNA register and TX antenna is set on each TX control descriptor + * (0 for automatic selection, 1 - 14 antenna number). + * + * We can let hw do all the work doing fast antenna diversity for both + * tx and rx or we can do things manually. Here are the options we have + * (all are bits of STA_ID1 register): + * + * AR5K_STA_ID1_DEFAULT_ANTENNA -> When 0 is set as the TX antenna on TX + * control descriptor, use the default antenna to transmit or else use the last + * antenna on which we received an ACK. + * + * AR5K_STA_ID1_DESC_ANTENNA -> Update default antenna after each TX frame to + * the antenna on which we got the ACK for that frame. + * + * AR5K_STA_ID1_RTS_DEF_ANTENNA -> Use default antenna for RTS or else use the + * one on the TX descriptor. + * + * AR5K_STA_ID1_SELFGEN_DEF_ANT -> Use default antenna for self generated frames + * (ACKs etc), or else use current antenna (the one we just used for TX). + * + * Using the above we support the following scenarios: + * + * AR5K_ANTMODE_DEFAULT -> Hw handles antenna diversity etc automatically + * + * AR5K_ANTMODE_FIXED_A -> Only antenna A (MAIN) is present + * + * AR5K_ANTMODE_FIXED_B -> Only antenna B (AUX) is present + * + * AR5K_ANTMODE_SINGLE_AP -> Sta locked on a single ap + * + * AR5K_ANTMODE_SECTOR_AP -> AP with tx antenna set on tx desc + * + * AR5K_ANTMODE_SECTOR_STA -> STA with tx antenna set on tx desc + * + * AR5K_ANTMODE_DEBUG Debug mode -A -> Rx, B-> Tx- + * + * Also note that when setting antenna to F on tx descriptor card inverts + * current tx antenna. + */ + +/** + * ath5k_hw_set_def_antenna() - Set default rx antenna on AR5211/5212 and newer + * @ah: The &struct ath5k_hw + * @ant: Antenna number + */ +static void ath5k_hw_set_def_antenna(struct ath5k_hw *ah, u8 ant) { if (ah->ah_version != AR5K_AR5210) ath5k_hw_reg_write(ah, ant & 0x7, AR5K_DEFAULT_ANTENNA); } -/* - * Enable/disable fast rx antenna diversity +/** + * ath5k_hw_set_fast_div() - Enable/disable fast rx antenna diversity + * @ah: The &struct ath5k_hw + * @ee_mode: One of enum ath5k_driver_mode + * @enable: True to enable, false to disable */ static void ath5k_hw_set_fast_div(struct ath5k_hw *ah, u8 ee_mode, bool enable) @@ -1913,6 +2250,14 @@ ath5k_hw_set_fast_div(struct ath5k_hw *ah, u8 ee_mode, bool enable) } } +/** + * ath5k_hw_set_antenna_switch() - Set up antenna switch table + * @ah: The &struct ath5k_hw + * @ee_mode: One of enum ath5k_driver_mode + * + * Switch table comes from EEPROM and includes information on controlling + * the 2 antenna RX attenuators + */ void ath5k_hw_set_antenna_switch(struct ath5k_hw *ah, u8 ee_mode) { @@ -1944,8 +2289,10 @@ ath5k_hw_set_antenna_switch(struct ath5k_hw *ah, u8 ee_mode) AR5K_PHY_ANT_SWITCH_TABLE_1); } -/* - * Set antenna operating mode +/** + * ath5k_hw_set_antenna_mode() - Set antenna operating mode + * @ah: The &struct ath5k_hw + * @ant_mode: One of enum ath5k_ant_mode */ void ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode) @@ -1966,12 +2313,7 @@ ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode) def_ant = ah->ah_def_ant; - ee_mode = ath5k_eeprom_mode_from_channel(channel); - if (ee_mode < 0) { - ATH5K_ERR(ah, - "invalid channel: %d\n", channel->center_freq); - return; - } + ee_mode = ath5k_eeprom_mode_from_channel(ah, channel); switch (ant_mode) { case AR5K_ANTMODE_DEFAULT: @@ -2068,8 +2410,13 @@ ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode) * Helper functions */ -/* - * Do linear interpolation between two given (x, y) points +/** + * ath5k_get_interpolated_value() - Get interpolated Y val between two points + * @target: X value of the middle point + * @x_left: X value of the left point + * @x_right: X value of the right point + * @y_left: Y value of the left point + * @y_right: Y value of the right point */ static s16 ath5k_get_interpolated_value(s16 target, s16 x_left, s16 x_right, @@ -2096,13 +2443,18 @@ ath5k_get_interpolated_value(s16 target, s16 x_left, s16 x_right, return result; } -/* - * Find vertical boundary (min pwr) for the linear PCDAC curve. +/** + * ath5k_get_linear_pcdac_min() - Find vertical boundary (min pwr) for the + * linear PCDAC curve + * @stepL: Left array with y values (pcdac steps) + * @stepR: Right array with y values (pcdac steps) + * @pwrL: Left array with x values (power steps) + * @pwrR: Right array with x values (power steps) * * Since we have the top of the curve and we draw the line below * until we reach 1 (1 pcdac step) we need to know which point - * (x value) that is so that we don't go below y axis and have negative - * pcdac values when creating the curve, or fill the table with zeroes. + * (x value) that is so that we don't go below x axis and have negative + * pcdac values when creating the curve, or fill the table with zeros. */ static s16 ath5k_get_linear_pcdac_min(const u8 *stepL, const u8 *stepR, @@ -2148,7 +2500,16 @@ ath5k_get_linear_pcdac_min(const u8 *stepL, const u8 *stepR, return max(min_pwrL, min_pwrR); } -/* +/** + * ath5k_create_power_curve() - Create a Power to PDADC or PCDAC curve + * @pmin: Minimum power value (xmin) + * @pmax: Maximum power value (xmax) + * @pwr: Array of power steps (x values) + * @vpd: Array of matching PCDAC/PDADC steps (y values) + * @num_points: Number of provided points + * @vpd_table: Array to fill with the full PCDAC/PDADC values (y values) + * @type: One of enum ath5k_powertable_type (eeprom.h) + * * Interpolate (pwr,vpd) points to create a Power to PDADC or a * Power to PCDAC curve. * @@ -2206,7 +2567,14 @@ ath5k_create_power_curve(s16 pmin, s16 pmax, } } -/* +/** + * ath5k_get_chan_pcal_surrounding_piers() - Get surrounding calibration piers + * for a given channel. + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * @pcinfo_l: The &struct ath5k_chan_pcal_info to put the left cal. pier + * @pcinfo_r: The &struct ath5k_chan_pcal_info to put the right cal. pier + * * Get the surrounding per-channel power calibration piers * for a given frequency so that we can interpolate between * them and come up with an appropriate dataset for our current @@ -2289,11 +2657,17 @@ done: *pcinfo_r = &pcinfo[idx_r]; } -/* +/** + * ath5k_get_rate_pcal_data() - Get the interpolated per-rate power + * calibration data + * @ah: The &struct ath5k_hw *ah, + * @channel: The &struct ieee80211_channel + * @rates: The &struct ath5k_rate_pcal_info to fill + * * Get the surrounding per-rate power calibration data * for a given frequency and interpolate between power * values to set max target power supported by hw for - * each rate. + * each rate on this frequency. */ static void ath5k_get_rate_pcal_data(struct ath5k_hw *ah, @@ -2381,7 +2755,11 @@ done: rpinfo[idx_r].target_power_54); } -/* +/** + * ath5k_get_max_ctl_power() - Get max edge power for a given frequency + * @ah: the &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * * Get the max edge power for this channel if * we have such data from EEPROM's Conformance Test * Limits (CTL), and limit max power if needed. @@ -2461,8 +2839,39 @@ ath5k_get_max_ctl_power(struct ath5k_hw *ah, * Power to PCDAC table functions */ -/* - * Fill Power to PCDAC table on RF5111 +/** + * DOC: Power to PCDAC table functions + * + * For RF5111 we have an XPD -eXternal Power Detector- curve + * for each calibrated channel. Each curve has 0,5dB Power steps + * on x axis and PCDAC steps (offsets) on y axis and looks like an + * exponential function. To recreate the curve we read 11 points + * from eeprom (eeprom.c) and interpolate here. + * + * For RF5112 we have 4 XPD -eXternal Power Detector- curves + * for each calibrated channel on 0, -6, -12 and -18dBm but we only + * use the higher (3) and the lower (0) curves. Each curve again has 0.5dB + * power steps on x axis and PCDAC steps on y axis and looks like a + * linear function. To recreate the curve and pass the power values + * on hw, we get 4 points for xpd 0 (lower gain -> max power) + * and 3 points for xpd 3 (higher gain -> lower power) from eeprom (eeprom.c) + * and interpolate here. + * + * For a given channel we get the calibrated points (piers) for it or + * -if we don't have calibration data for this specific channel- from the + * available surrounding channels we have calibration data for, after we do a + * linear interpolation between them. Then since we have our calibrated points + * for this channel, we do again a linear interpolation between them to get the + * whole curve. + * + * We finally write the Y values of the curve(s) (the PCDAC values) on hw + */ + +/** + * ath5k_fill_pwr_to_pcdac_table() - Fill Power to PCDAC table on RF5111 + * @ah: The &struct ath5k_hw + * @table_min: Minimum power (x min) + * @table_max: Maximum power (x max) * * No further processing is needed for RF5111, the only thing we have to * do is fill the values below and above calibration range since eeprom data @@ -2503,10 +2912,14 @@ ath5k_fill_pwr_to_pcdac_table(struct ath5k_hw *ah, s16* table_min, } -/* - * Combine available XPD Curves and fill Linear Power to PCDAC table - * on RF5112 +/** + * ath5k_combine_linear_pcdac_curves() - Combine available PCDAC Curves + * @ah: The &struct ath5k_hw + * @table_min: Minimum power (x min) + * @table_max: Maximum power (x max) + * @pdcurves: Number of pd curves * + * Combine available XPD Curves and fill Linear Power to PCDAC table on RF5112 * RFX112 can have up to 2 curves (one for low txpower range and one for * higher txpower range). We need to put them both on pcdac_out and place * them in the correct location. In case we only have one curve available @@ -2608,7 +3021,10 @@ ath5k_combine_linear_pcdac_curves(struct ath5k_hw *ah, s16* table_min, } } -/* Write PCDAC values on hw */ +/** + * ath5k_write_pcdac_table() - Write the PCDAC values on hw + * @ah: The &struct ath5k_hw + */ static void ath5k_write_pcdac_table(struct ath5k_hw *ah) { @@ -2631,9 +3047,32 @@ ath5k_write_pcdac_table(struct ath5k_hw *ah) * Power to PDADC table functions */ -/* - * Set the gain boundaries and create final Power to PDADC table +/** + * DOC: Power to PDADC table functions * + * For RF2413 and later we have a Power to PDADC table (Power Detector) + * instead of a PCDAC (Power Control) and 4 pd gain curves for each + * calibrated channel. Each curve has power on x axis in 0.5 db steps and + * PDADC steps on y axis and looks like an exponential function like the + * RF5111 curve. + * + * To recreate the curves we read the points from eeprom (eeprom.c) + * and interpolate here. Note that in most cases only 2 (higher and lower) + * curves are used (like RF5112) but vendors have the opportunity to include + * all 4 curves on eeprom. The final curve (higher power) has an extra + * point for better accuracy like RF5112. + * + * The process is similar to what we do above for RF5111/5112 + */ + +/** + * ath5k_combine_pwr_to_pdadc_curves() - Combine the various PDADC curves + * @ah: The &struct ath5k_hw + * @pwr_min: Minimum power (x min) + * @pwr_max: Maximum power (x max) + * @pdcurves: Number of available curves + * + * Combine the various pd curves and create the final Power to PDADC table * We can have up to 4 pd curves, we need to do a similar process * as we do for RF5112. This time we don't have an edge_flag but we * set the gain boundaries on a separate register. @@ -2757,7 +3196,11 @@ ath5k_combine_pwr_to_pdadc_curves(struct ath5k_hw *ah, } -/* Write PDADC values on hw */ +/** + * ath5k_write_pwr_to_pdadc_table() - Write the PDADC values on hw + * @ah: The &struct ath5k_hw + * @ee_mode: One of enum ath5k_driver_mode + */ static void ath5k_write_pwr_to_pdadc_table(struct ath5k_hw *ah, u8 ee_mode) { @@ -2814,7 +3257,13 @@ ath5k_write_pwr_to_pdadc_table(struct ath5k_hw *ah, u8 ee_mode) * Common code for PCDAC/PDADC tables */ -/* +/** + * ath5k_setup_channel_powertable() - Set up power table for this channel + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * @ee_mode: One of enum ath5k_driver_mode + * @type: One of enum ath5k_powertable_type (eeprom.h) + * * This is the main function that uses all of the above * to set PCDAC/PDADC table on hw for the current channel. * This table is used for tx power calibration on the baseband, @@ -3012,7 +3461,12 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah, return 0; } -/* Write power table for current channel to hw */ +/** + * ath5k_write_channel_powertable() - Set power table for current channel on hw + * @ah: The &struct ath5k_hw + * @ee_mode: One of enum ath5k_driver_mode + * @type: One of enum ath5k_powertable_type (eeprom.h) + */ static void ath5k_write_channel_powertable(struct ath5k_hw *ah, u8 ee_mode, u8 type) { @@ -3022,28 +3476,36 @@ ath5k_write_channel_powertable(struct ath5k_hw *ah, u8 ee_mode, u8 type) ath5k_write_pcdac_table(ah); } -/* - * Per-rate tx power setting + +/** + * DOC: Per-rate tx power setting * - * This is the code that sets the desired tx power (below + * This is the code that sets the desired tx power limit (below * maximum) on hw for each rate (we also have TPC that sets - * power per packet). We do that by providing an index on the - * PCDAC/PDADC table we set up. - */ - -/* - * Set rate power table + * power per packet type). We do that by providing an index on the + * PCDAC/PDADC table we set up above, for each rate. * * For now we only limit txpower based on maximum tx power - * supported by hw (what's inside rate_info). We need to limit - * this even more, based on regulatory domain etc. + * supported by hw (what's inside rate_info) + conformance test + * limits. We need to limit this even more, based on regulatory domain + * etc to be safe. Normally this is done from above so we don't care + * here, all we care is that the tx power we set will be O.K. + * for the hw (e.g. won't create noise on PA etc). * - * Rate power table contains indices to PCDAC/PDADC table (0.5dB steps) - * and is indexed as follows: + * Rate power table contains indices to PCDAC/PDADC table (0.5dB steps - + * x values) and is indexed as follows: * rates[0] - rates[7] -> OFDM rates * rates[8] - rates[14] -> CCK rates * rates[15] -> XR rates (they all have the same power) */ + +/** + * ath5k_setup_rate_powertable() - Set up rate power table for a given tx power + * @ah: The &struct ath5k_hw + * @max_pwr: The maximum tx power requested in 0.5dB steps + * @rate_info: The &struct ath5k_rate_pcal_info to fill + * @ee_mode: One of enum ath5k_driver_mode + */ static void ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr, struct ath5k_rate_pcal_info *rate_info, @@ -3051,6 +3513,7 @@ ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr, { unsigned int i; u16 *rates; + s16 rate_idx_scaled = 0; /* max_pwr is power level we got from driver/user in 0.5dB * units, switch to 0.25dB units so we can compare */ @@ -3097,25 +3560,43 @@ ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr, for (i = 8; i <= 15; i++) rates[i] -= ah->ah_txpower.txp_cck_ofdm_gainf_delta; + /* Save min/max and current tx power for this channel + * in 0.25dB units. + * + * Note: We use rates[0] for current tx power because + * it covers most of the rates, in most cases. It's our + * tx power limit and what the user expects to see. */ + ah->ah_txpower.txp_min_pwr = 2 * rates[7]; + ah->ah_txpower.txp_cur_pwr = 2 * rates[0]; + + /* Set max txpower for correct OFDM operation on all rates + * -that is the txpower for 54Mbit-, it's used for the PAPD + * gain probe and it's in 0.5dB units */ + ah->ah_txpower.txp_ofdm = rates[7]; + /* Now that we have all rates setup use table offset to * match the power range set by user with the power indices * on PCDAC/PDADC table */ for (i = 0; i < 16; i++) { - rates[i] += ah->ah_txpower.txp_offset; + rate_idx_scaled = rates[i] + ah->ah_txpower.txp_offset; /* Don't get out of bounds */ - if (rates[i] > 63) - rates[i] = 63; + if (rate_idx_scaled > 63) + rate_idx_scaled = 63; + if (rate_idx_scaled < 0) + rate_idx_scaled = 0; + rates[i] = rate_idx_scaled; } - - /* Min/max in 0.25dB units */ - ah->ah_txpower.txp_min_pwr = 2 * rates[7]; - ah->ah_txpower.txp_cur_pwr = 2 * rates[0]; - ah->ah_txpower.txp_ofdm = rates[7]; } -/* - * Set transmission power +/** + * ath5k_hw_txpower() - Set transmission power limit for a given channel + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * @txpower: Requested tx power in 0.5dB steps + * + * Combines all of the above to set the requested tx power limit + * on hw. */ static int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, @@ -3132,12 +3613,7 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, return -EINVAL; } - ee_mode = ath5k_eeprom_mode_from_channel(channel); - if (ee_mode < 0) { - ATH5K_ERR(ah, - "invalid channel: %d\n", channel->center_freq); - return -EINVAL; - } + ee_mode = ath5k_eeprom_mode_from_channel(ah, channel); /* Initialize TX power table */ switch (ah->ah_radio) { @@ -3168,10 +3644,17 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, if (!ah->ah_txpower.txp_setup || (channel->hw_value != curr_channel->hw_value) || (channel->center_freq != curr_channel->center_freq)) { - /* Reset TX power values */ + /* Reset TX power values but preserve requested + * tx power from above */ + int requested_txpower = ah->ah_txpower.txp_requested; + memset(&ah->ah_txpower, 0, sizeof(ah->ah_txpower)); + + /* Restore TPC setting and requested tx power */ ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER; + ah->ah_txpower.txp_requested = requested_txpower; + /* Calculate the powertable */ ret = ath5k_setup_channel_powertable(ah, channel, ee_mode, type); @@ -3226,14 +3709,23 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, AR5K_REG_MS(AR5K_TUNE_MAX_TXPOWER, AR5K_TPC_CHIRP), AR5K_TPC); } else { - ath5k_hw_reg_write(ah, AR5K_PHY_TXPOWER_RATE_MAX | - AR5K_TUNE_MAX_TXPOWER, AR5K_PHY_TXPOWER_RATE_MAX); + ath5k_hw_reg_write(ah, AR5K_TUNE_MAX_TXPOWER, + AR5K_PHY_TXPOWER_RATE_MAX); } return 0; } -int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower) +/** + * ath5k_hw_set_txpower_limit() - Set txpower limit for the current channel + * @ah: The &struct ath5k_hw + * @txpower: The requested tx power limit in 0.5dB steps + * + * This function provides access to ath5k_hw_txpower to the driver in + * case user or an application changes it while PHY is running. + */ +int +ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower) { ATH5K_DBG(ah, ATH5K_DEBUG_TXPOWER, "changing txpower to %d\n", txpower); @@ -3241,11 +3733,26 @@ int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower) return ath5k_hw_txpower(ah, ah->ah_current_channel, txpower); } + /*************\ Init function \*************/ -int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, +/** + * ath5k_hw_phy_init() - Initialize PHY + * @ah: The &struct ath5k_hw + * @channel: The @struct ieee80211_channel + * @mode: One of enum ath5k_driver_mode + * @fast: Try a fast channel switch instead + * + * This is the main function used during reset to initialize PHY + * or do a fast channel change if possible. + * + * NOTE: Do not call this one from the driver, it assumes PHY is in a + * warm reset state ! + */ +int +ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, u8 mode, bool fast) { struct ieee80211_channel *curr_channel; @@ -3294,8 +3801,9 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, * RF buffer settings on 5211/5212+ so that we * properly set curve indices. */ - ret = ath5k_hw_txpower(ah, channel, ah->ah_txpower.txp_cur_pwr ? - ah->ah_txpower.txp_cur_pwr / 2 : AR5K_TUNE_MAX_TXPOWER); + ret = ath5k_hw_txpower(ah, channel, ah->ah_txpower.txp_requested ? + ah->ah_txpower.txp_requested * 2 : + AR5K_TUNE_MAX_TXPOWER); if (ret) return ret; @@ -3355,7 +3863,7 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, if (ret) return ret; - mdelay(1); + usleep_range(1000, 1500); /* * Write RF buffer @@ -3376,10 +3884,10 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, } } else if (ah->ah_version == AR5K_AR5210) { - mdelay(1); + usleep_range(1000, 1500); /* Disable phy and wait */ ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT); - mdelay(1); + usleep_range(1000, 1500); } /* Set channel on PHY */ @@ -3405,7 +3913,7 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, for (i = 0; i <= 20; i++) { if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10)) break; - udelay(200); + usleep_range(200, 250); } ath5k_hw_reg_write(ah, phy_tst1, AR5K_PHY_TST1); @@ -3433,9 +3941,9 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, /* At the same time start I/Q calibration for QAM constellation * -no need for CCK- */ - ah->ah_calibration = false; + ah->ah_iq_cal_needed = false; if (!(mode == AR5K_MODE_11B)) { - ah->ah_calibration = true; + ah->ah_iq_cal_needed = true; AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15); AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, diff --git a/drivers/net/wireless/ath/ath5k/qcu.c b/drivers/net/wireless/ath/ath5k/qcu.c index 776654228ea..0583c69d26d 100644 --- a/drivers/net/wireless/ath/ath5k/qcu.c +++ b/drivers/net/wireless/ath/ath5k/qcu.c @@ -17,23 +17,50 @@ */ /********************************************\ -Queue Control Unit, DFS Control Unit Functions +Queue Control Unit, DCF Control Unit Functions \********************************************/ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include "ath5k.h" #include "reg.h" #include "debug.h" +#include <linux/log2.h> + +/** + * DOC: Queue Control Unit (QCU)/DCF Control Unit (DCU) functions + * + * Here we setup parameters for the 12 available TX queues. Note that + * on the various registers we can usually only map the first 10 of them so + * basically we have 10 queues to play with. Each queue has a matching + * QCU that controls when the queue will get triggered and multiple QCUs + * can be mapped to a single DCU that controls the various DFS parameters + * for the various queues. In our setup we have a 1:1 mapping between QCUs + * and DCUs allowing us to have different DFS settings for each queue. + * + * When a frame goes into a TX queue, QCU decides when it'll trigger a + * transmission based on various criteria (such as how many data we have inside + * it's buffer or -if it's a beacon queue- if it's time to fire up the queue + * based on TSF etc), DCU adds backoff, IFSes etc and then a scheduler + * (arbitrator) decides the priority of each QCU based on it's configuration + * (e.g. beacons are always transmitted when they leave DCU bypassing all other + * frames from other queues waiting to be transmitted). After a frame leaves + * the DCU it goes to PCU for further processing and then to PHY for + * the actual transmission. + */ /******************\ * Helper functions * \******************/ -/* - * Get number of pending frames - * for a specific queue [5211+] +/** + * ath5k_hw_num_tx_pending() - Get number of pending frames for a given queue + * @ah: The &struct ath5k_hw + * @queue: One of enum ath5k_tx_queue_id */ -u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue) +u32 +ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue) { u32 pending; AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); @@ -58,10 +85,13 @@ u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue) return pending; } -/* - * Set a transmit queue inactive +/** + * ath5k_hw_release_tx_queue() - Set a transmit queue inactive + * @ah: The &struct ath5k_hw + * @queue: One of enum ath5k_tx_queue_id */ -void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue) +void +ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue) { if (WARN_ON(queue >= ah->ah_capabilities.cap_queues.q_tx_num)) return; @@ -72,34 +102,56 @@ void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue) AR5K_Q_DISABLE_BITS(ah->ah_txq_status, queue); } -/* +/** + * ath5k_cw_validate() - Make sure the given cw is valid + * @cw_req: The contention window value to check + * * Make sure cw is a power of 2 minus 1 and smaller than 1024 */ -static u16 ath5k_cw_validate(u16 cw_req) +static u16 +ath5k_cw_validate(u16 cw_req) { - u32 cw = 1; cw_req = min(cw_req, (u16)1023); - while (cw < cw_req) - cw = (cw << 1) | 1; + /* Check if cw_req + 1 a power of 2 */ + if (is_power_of_2(cw_req + 1)) + return cw_req; + + /* Check if cw_req is a power of 2 */ + if (is_power_of_2(cw_req)) + return cw_req - 1; + + /* If none of the above is correct + * find the closest power of 2 */ + cw_req = (u16) roundup_pow_of_two(cw_req) - 1; - return cw; + return cw_req; } -/* - * Get properties for a transmit queue +/** + * ath5k_hw_get_tx_queueprops() - Get properties for a transmit queue + * @ah: The &struct ath5k_hw + * @queue: One of enum ath5k_tx_queue_id + * @queue_info: The &struct ath5k_txq_info to fill */ -int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, +int +ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, struct ath5k_txq_info *queue_info) { memcpy(queue_info, &ah->ah_txq[queue], sizeof(struct ath5k_txq_info)); return 0; } -/* - * Set properties for a transmit queue +/** + * ath5k_hw_set_tx_queueprops() - Set properties for a transmit queue + * @ah: The &struct ath5k_hw + * @queue: One of enum ath5k_tx_queue_id + * @qinfo: The &struct ath5k_txq_info to use + * + * Returns 0 on success or -EIO if queue is inactive */ -int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue, +int +ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue, const struct ath5k_txq_info *qinfo) { struct ath5k_txq_info *qi; @@ -139,10 +191,16 @@ int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue, return 0; } -/* - * Initialize a transmit queue +/** + * ath5k_hw_setup_tx_queue() - Initialize a transmit queue + * @ah: The &struct ath5k_hw + * @queue_type: One of enum ath5k_tx_queue + * @queue_info: The &struct ath5k_txq_info to use + * + * Returns 0 on success, -EINVAL on invalid arguments */ -int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type, +int +ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type, struct ath5k_txq_info *queue_info) { unsigned int queue; @@ -217,10 +275,16 @@ int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type, * Single QCU/DCU initialization * \*******************************/ -/* - * Set tx retry limits on DCU +/** + * ath5k_hw_set_tx_retry_limits() - Set tx retry limits on DCU + * @ah: The &struct ath5k_hw + * @queue: One of enum ath5k_tx_queue_id + * + * This function is used when initializing a queue, to set + * retry limits based on ah->ah_retry_* and the chipset used. */ -void ath5k_hw_set_tx_retry_limits(struct ath5k_hw *ah, +void +ath5k_hw_set_tx_retry_limits(struct ath5k_hw *ah, unsigned int queue) { /* Single data queue on AR5210 */ @@ -255,15 +319,15 @@ void ath5k_hw_set_tx_retry_limits(struct ath5k_hw *ah, } /** - * ath5k_hw_reset_tx_queue - Initialize a single hw queue - * - * @ah The &struct ath5k_hw - * @queue The hw queue number + * ath5k_hw_reset_tx_queue() - Initialize a single hw queue + * @ah: The &struct ath5k_hw + * @queue: One of enum ath5k_tx_queue_id * - * Set DFS properties for the given transmit queue on DCU + * Set DCF properties for the given transmit queue on DCU * and configures all queue-specific parameters. */ -int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue) +int +ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue) { struct ath5k_txq_info *tq = &ah->ah_txq[queue]; @@ -491,10 +555,9 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue) \**************************/ /** - * ath5k_hw_set_ifs_intervals - Set global inter-frame spaces on DCU - * - * @ah The &struct ath5k_hw - * @slot_time Slot time in us + * ath5k_hw_set_ifs_intervals() - Set global inter-frame spaces on DCU + * @ah: The &struct ath5k_hw + * @slot_time: Slot time in us * * Sets the global IFS intervals on DCU (also works on AR5210) for * the given slot time and the current bwmode. @@ -502,9 +565,12 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue) int ath5k_hw_set_ifs_intervals(struct ath5k_hw *ah, unsigned int slot_time) { struct ieee80211_channel *channel = ah->ah_current_channel; + enum ieee80211_band band; + struct ieee80211_supported_band *sband; struct ieee80211_rate *rate; u32 ack_tx_time, eifs, eifs_clock, sifs, sifs_clock; u32 slot_time_clock = ath5k_hw_htoclock(ah, slot_time); + u32 rate_flags, i; if (slot_time < 6 || slot_time_clock > AR5K_SLOT_TIME_MAX) return -EINVAL; @@ -537,11 +603,33 @@ int ath5k_hw_set_ifs_intervals(struct ath5k_hw *ah, unsigned int slot_time) * Also we have different lowest rate for 802.11a */ if (channel->band == IEEE80211_BAND_5GHZ) - rate = &ah->sbands[IEEE80211_BAND_5GHZ].bitrates[0]; + band = IEEE80211_BAND_5GHZ; else - rate = &ah->sbands[IEEE80211_BAND_2GHZ].bitrates[0]; + band = IEEE80211_BAND_2GHZ; + + switch (ah->ah_bwmode) { + case AR5K_BWMODE_5MHZ: + rate_flags = IEEE80211_RATE_SUPPORTS_5MHZ; + break; + case AR5K_BWMODE_10MHZ: + rate_flags = IEEE80211_RATE_SUPPORTS_10MHZ; + break; + default: + rate_flags = 0; + break; + } + sband = &ah->sbands[band]; + rate = NULL; + for (i = 0; i < sband->n_bitrates; i++) { + if ((rate_flags & sband->bitrates[i].flags) != rate_flags) + continue; + rate = &sband->bitrates[i]; + break; + } + if (WARN_ON(!rate)) + return -EINVAL; - ack_tx_time = ath5k_hw_get_frame_duration(ah, 10, rate, false); + ack_tx_time = ath5k_hw_get_frame_duration(ah, band, 10, rate, false); /* ack_tx_time includes an SIFS already */ eifs = ack_tx_time + sifs + 2 * slot_time; @@ -597,7 +685,15 @@ int ath5k_hw_set_ifs_intervals(struct ath5k_hw *ah, unsigned int slot_time) } -int ath5k_hw_init_queues(struct ath5k_hw *ah) +/** + * ath5k_hw_init_queues() - Initialize tx queues + * @ah: The &struct ath5k_hw + * + * Initializes all tx queues based on information on + * ah->ah_txq* set by the driver + */ +int +ath5k_hw_init_queues(struct ath5k_hw *ah) { int i, ret; diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h index f5c1000045d..0ea1608b47f 100644 --- a/drivers/net/wireless/ath/ath5k/reg.h +++ b/drivers/net/wireless/ath/ath5k/reg.h @@ -280,6 +280,10 @@ * 5211/5212 we have one primary and 4 secondary registers. * So we have AR5K_ISR for 5210 and AR5K_PISR /SISRx for 5211/5212. * Most of these bits are common for all chipsets. + * + * NOTE: On 5211+ TXOK, TXDESC, TXERR, TXEOL and TXURN contain + * the logical OR from per-queue interrupt bits found on SISR registers + * (see below). */ #define AR5K_ISR 0x001c /* Register Address [5210] */ #define AR5K_PISR 0x0080 /* Register Address [5211+] */ @@ -292,7 +296,10 @@ #define AR5K_ISR_TXOK 0x00000040 /* Frame successfully transmitted */ #define AR5K_ISR_TXDESC 0x00000080 /* TX descriptor request */ #define AR5K_ISR_TXERR 0x00000100 /* Transmit error */ -#define AR5K_ISR_TXNOFRM 0x00000200 /* No frame transmitted (transmit timeout) */ +#define AR5K_ISR_TXNOFRM 0x00000200 /* No frame transmitted (transmit timeout) + * NOTE: We don't have per-queue info for this + * one, but we can enable it per-queue through + * TXNOFRM_QCU field on TXNOFRM register */ #define AR5K_ISR_TXEOL 0x00000400 /* Empty TX descriptor */ #define AR5K_ISR_TXURN 0x00000800 /* Transmit FIFO underrun */ #define AR5K_ISR_MIB 0x00001000 /* Update MIB counters */ @@ -302,21 +309,29 @@ #define AR5K_ISR_SWBA 0x00010000 /* Software beacon alert */ #define AR5K_ISR_BRSSI 0x00020000 /* Beacon rssi below threshold (?) */ #define AR5K_ISR_BMISS 0x00040000 /* Beacon missed */ -#define AR5K_ISR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] */ +#define AR5K_ISR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] + * 'or' of MCABT, SSERR, DPERR from SISR2 */ #define AR5K_ISR_BNR 0x00100000 /* Beacon not ready [5211+] */ #define AR5K_ISR_MCABT 0x00100000 /* Master Cycle Abort [5210] */ #define AR5K_ISR_RXCHIRP 0x00200000 /* CHIRP Received [5212+] */ #define AR5K_ISR_SSERR 0x00200000 /* Signaled System Error [5210] */ -#define AR5K_ISR_DPERR 0x00400000 /* Det par Error (?) [5210] */ +#define AR5K_ISR_DPERR 0x00400000 /* Bus parity error [5210] */ #define AR5K_ISR_RXDOPPLER 0x00400000 /* Doppler chirp received [5212+] */ #define AR5K_ISR_TIM 0x00800000 /* [5211+] */ -#define AR5K_ISR_BCNMISC 0x00800000 /* 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT, - CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */ +#define AR5K_ISR_BCNMISC 0x00800000 /* Misc beacon related interrupt + * 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT, + * CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */ #define AR5K_ISR_GPIO 0x01000000 /* GPIO (rf kill) */ #define AR5K_ISR_QCBRORN 0x02000000 /* QCU CBR overrun [5211+] */ #define AR5K_ISR_QCBRURN 0x04000000 /* QCU CBR underrun [5211+] */ #define AR5K_ISR_QTRIG 0x08000000 /* QCU scheduling trigger [5211+] */ +#define AR5K_ISR_BITS_FROM_SISRS (AR5K_ISR_TXOK | AR5K_ISR_TXDESC |\ + AR5K_ISR_TXERR | AR5K_ISR_TXEOL |\ + AR5K_ISR_TXURN | AR5K_ISR_HIUERR |\ + AR5K_ISR_BCNMISC | AR5K_ISR_QCBRORN |\ + AR5K_ISR_QCBRURN | AR5K_ISR_QTRIG) + /* * Secondary status registers [5211+] (0 - 4) * @@ -347,7 +362,7 @@ #define AR5K_SISR2_BCN_TIMEOUT 0x08000000 /* Beacon Timeout [5212+] */ #define AR5K_SISR2_CAB_TIMEOUT 0x10000000 /* CAB Timeout [5212+] */ #define AR5K_SISR2_DTIM 0x20000000 /* [5212+] */ -#define AR5K_SISR2_TSFOOR 0x80000000 /* TSF OOR (?) */ +#define AR5K_SISR2_TSFOOR 0x80000000 /* TSF Out of range */ #define AR5K_SISR3 0x0090 /* Register Address [5211+] */ #define AR5K_SISR3_QCBRORN 0x000003ff /* Mask for QCBRORN */ diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c index 2abac257b4b..a3399c4f13a 100644 --- a/drivers/net/wireless/ath/ath5k/reset.c +++ b/drivers/net/wireless/ath/ath5k/reset.c @@ -19,9 +19,11 @@ * */ -/*****************************\ - Reset functions and helpers -\*****************************/ +/****************************\ + Reset function and helpers +\****************************/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include <asm/unaligned.h> @@ -33,14 +35,36 @@ #include "debug.h" +/** + * DOC: Reset function and helpers + * + * Here we implement the main reset routine, used to bring the card + * to a working state and ready to receive. We also handle routines + * that don't fit on other places such as clock, sleep and power control + */ + + /******************\ * Helper functions * \******************/ -/* - * Check if a register write has been completed +/** + * ath5k_hw_register_timeout() - Poll a register for a flag/field change + * @ah: The &struct ath5k_hw + * @reg: The register to read + * @flag: The flag/field to check on the register + * @val: The field value we expect (if we check a field) + * @is_set: Instead of checking if the flag got cleared, check if it got set + * + * Some registers contain flags that indicate that an operation is + * running. We use this function to poll these registers and check + * if these flags get cleared. We also use it to poll a register + * field (containing multiple flags) until it gets a specific value. + * + * Returns -EAGAIN if we exceeded AR5K_TUNE_REGISTER_TIMEOUT * 15us or 0 */ -int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, +int +ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, bool is_set) { int i; @@ -64,35 +88,48 @@ int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, \*************************/ /** - * ath5k_hw_htoclock - Translate usec to hw clock units - * + * ath5k_hw_htoclock() - Translate usec to hw clock units * @ah: The &struct ath5k_hw * @usec: value in microseconds + * + * Translate usecs to hw clock units based on the current + * hw clock rate. + * + * Returns number of clock units */ -unsigned int ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec) +unsigned int +ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec) { struct ath_common *common = ath5k_hw_common(ah); return usec * common->clockrate; } /** - * ath5k_hw_clocktoh - Translate hw clock units to usec + * ath5k_hw_clocktoh() - Translate hw clock units to usec + * @ah: The &struct ath5k_hw * @clock: value in hw clock units + * + * Translate hw clock units to usecs based on the current + * hw clock rate. + * + * Returns number of usecs */ -unsigned int ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock) +unsigned int +ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock) { struct ath_common *common = ath5k_hw_common(ah); return clock / common->clockrate; } /** - * ath5k_hw_init_core_clock - Initialize core clock - * - * @ah The &struct ath5k_hw + * ath5k_hw_init_core_clock() - Initialize core clock + * @ah: The &struct ath5k_hw * - * Initialize core clock parameters (usec, usec32, latencies etc). + * Initialize core clock parameters (usec, usec32, latencies etc), + * based on current bwmode and chipset properties. */ -static void ath5k_hw_init_core_clock(struct ath5k_hw *ah) +static void +ath5k_hw_init_core_clock(struct ath5k_hw *ah) { struct ieee80211_channel *channel = ah->ah_current_channel; struct ath_common *common = ath5k_hw_common(ah); @@ -227,16 +264,21 @@ static void ath5k_hw_init_core_clock(struct ath5k_hw *ah) } } -/* +/** + * ath5k_hw_set_sleep_clock() - Setup sleep clock operation + * @ah: The &struct ath5k_hw + * @enable: Enable sleep clock operation (false to disable) + * * If there is an external 32KHz crystal available, use it * as ref. clock instead of 32/40MHz clock and baseband clocks * to save power during sleep or restore normal 32/40MHz * operation. * - * XXX: When operating on 32KHz certain PHY registers (27 - 31, - * 123 - 127) require delay on access. + * NOTE: When operating on 32KHz certain PHY registers (27 - 31, + * 123 - 127) require delay on access. */ -static void ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable) +static void +ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable) { struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; u32 scal, spending, sclock; @@ -340,10 +382,19 @@ static void ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable) * Reset/Sleep control * \*********************/ -/* - * Reset chipset +/** + * ath5k_hw_nic_reset() - Reset the various chipset units + * @ah: The &struct ath5k_hw + * @val: Mask to indicate what units to reset + * + * To reset the various chipset units we need to write + * the mask to AR5K_RESET_CTL and poll the register until + * all flags are cleared. + * + * Returns 0 if we are O.K. or -EAGAIN (from athk5_hw_register_timeout) */ -static int ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val) +static int +ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val) { int ret; u32 mask = val ? val : ~0U; @@ -357,7 +408,7 @@ static int ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val) ath5k_hw_reg_write(ah, val, AR5K_RESET_CTL); /* Wait at least 128 PCI clocks */ - udelay(15); + usleep_range(15, 20); if (ah->ah_version == AR5K_AR5210) { val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA @@ -382,12 +433,17 @@ static int ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val) return ret; } -/* - * Reset AHB chipset - * AR5K_RESET_CTL_PCU flag resets WMAC - * AR5K_RESET_CTL_BASEBAND flag resets WBB +/** + * ath5k_hw_wisoc_reset() - Reset AHB chipset + * @ah: The &struct ath5k_hw + * @flags: Mask to indicate what units to reset + * + * Same as ath5k_hw_nic_reset but for AHB based devices + * + * Returns 0 if we are O.K. or -EAGAIN (from athk5_hw_register_timeout) */ -static int ath5k_hw_wisoc_reset(struct ath5k_hw *ah, u32 flags) +static int +ath5k_hw_wisoc_reset(struct ath5k_hw *ah, u32 flags) { u32 mask = flags ? flags : ~0U; u32 __iomem *reg; @@ -419,14 +475,14 @@ static int ath5k_hw_wisoc_reset(struct ath5k_hw *ah, u32 flags) } /* Put BB/MAC into reset */ - regval = __raw_readl(reg); - __raw_writel(regval | val, reg); - regval = __raw_readl(reg); - udelay(100); + regval = ioread32(reg); + iowrite32(regval | val, reg); + regval = ioread32(reg); + usleep_range(100, 150); /* Bring BB/MAC out of reset */ - __raw_writel(regval & ~val, reg); - regval = __raw_readl(reg); + iowrite32(regval & ~val, reg); + regval = ioread32(reg); /* * Reset configuration register (for hw byte-swap). Note that this @@ -439,11 +495,23 @@ static int ath5k_hw_wisoc_reset(struct ath5k_hw *ah, u32 flags) return 0; } - -/* - * Sleep control +/** + * ath5k_hw_set_power_mode() - Set power mode + * @ah: The &struct ath5k_hw + * @mode: One of enum ath5k_power_mode + * @set_chip: Set to true to write sleep control register + * @sleep_duration: How much time the device is allowed to sleep + * when sleep logic is enabled (in 128 microsecond increments). + * + * This function is used to configure sleep policy and allowed + * sleep modes. For more information check out the sleep control + * register on reg.h and STA_ID1. + * + * Returns 0 on success, -EIO if chip didn't wake up or -EINVAL if an invalid + * mode is requested. */ -static int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, +static int +ath5k_hw_set_power_mode(struct ath5k_hw *ah, enum ath5k_power_mode mode, bool set_chip, u16 sleep_duration) { unsigned int i; @@ -493,7 +561,7 @@ static int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, ath5k_hw_reg_write(ah, data | AR5K_SLEEP_CTL_SLE_WAKE, AR5K_SLEEP_CTL); - udelay(15); + usleep_range(15, 20); for (i = 200; i > 0; i--) { /* Check if the chip did wake up */ @@ -502,7 +570,7 @@ static int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, break; /* Wait a bit and retry */ - udelay(50); + usleep_range(50, 75); ath5k_hw_reg_write(ah, data | AR5K_SLEEP_CTL_SLE_WAKE, AR5K_SLEEP_CTL); } @@ -523,17 +591,20 @@ commit: return 0; } -/* - * Put device on hold +/** + * ath5k_hw_on_hold() - Put device on hold + * @ah: The &struct ath5k_hw * - * Put MAC and Baseband on warm reset and - * keep that state (don't clean sleep control - * register). After this MAC and Baseband are - * disabled and a full reset is needed to come - * back. This way we save as much power as possible + * Put MAC and Baseband on warm reset and keep that state + * (don't clean sleep control register). After this MAC + * and Baseband are disabled and a full reset is needed + * to come back. This way we save as much power as possible * without putting the card on full sleep. + * + * Returns 0 on success or -EIO on error */ -int ath5k_hw_on_hold(struct ath5k_hw *ah) +int +ath5k_hw_on_hold(struct ath5k_hw *ah) { struct pci_dev *pdev = ah->pdev; u32 bus_flags; @@ -543,7 +614,7 @@ int ath5k_hw_on_hold(struct ath5k_hw *ah) return 0; /* Make sure device is awake */ - ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0); + ret = ath5k_hw_set_power_mode(ah, AR5K_PM_AWAKE, true, 0); if (ret) { ATH5K_ERR(ah, "failed to wakeup the MAC Chip\n"); return ret; @@ -563,7 +634,7 @@ int ath5k_hw_on_hold(struct ath5k_hw *ah) ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA | AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI); - mdelay(2); + usleep_range(2000, 2500); } else { ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND | bus_flags); @@ -575,7 +646,7 @@ int ath5k_hw_on_hold(struct ath5k_hw *ah) } /* ...wakeup again!*/ - ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0); + ret = ath5k_hw_set_power_mode(ah, AR5K_PM_AWAKE, true, 0); if (ret) { ATH5K_ERR(ah, "failed to put device on hold\n"); return ret; @@ -584,11 +655,18 @@ int ath5k_hw_on_hold(struct ath5k_hw *ah) return ret; } -/* +/** + * ath5k_hw_nic_wakeup() - Force card out of sleep + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * * Bring up MAC + PHY Chips and program PLL - * Channel is NULL for the initial wakeup. + * NOTE: Channel is NULL for the initial wakeup. + * + * Returns 0 on success, -EIO on hw failure or -EINVAL for false channel infos */ -int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, struct ieee80211_channel *channel) +int +ath5k_hw_nic_wakeup(struct ath5k_hw *ah, struct ieee80211_channel *channel) { struct pci_dev *pdev = ah->pdev; u32 turbo, mode, clock, bus_flags; @@ -600,7 +678,7 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, struct ieee80211_channel *channel) if ((ath5k_get_bus_type(ah) != ATH_AHB) || channel) { /* Wakeup the device */ - ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0); + ret = ath5k_hw_set_power_mode(ah, AR5K_PM_AWAKE, true, 0); if (ret) { ATH5K_ERR(ah, "failed to wakeup the MAC Chip\n"); return ret; @@ -621,7 +699,7 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, struct ieee80211_channel *channel) ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA | AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI); - mdelay(2); + usleep_range(2000, 2500); } else { if (ath5k_get_bus_type(ah) == ATH_AHB) ret = ath5k_hw_wisoc_reset(ah, AR5K_RESET_CTL_PCU | @@ -637,7 +715,7 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, struct ieee80211_channel *channel) } /* ...wakeup again!...*/ - ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0); + ret = ath5k_hw_set_power_mode(ah, AR5K_PM_AWAKE, true, 0); if (ret) { ATH5K_ERR(ah, "failed to resume the MAC Chip\n"); return ret; @@ -711,9 +789,9 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, struct ieee80211_channel *channel) * (I don't think it supports 44MHz) */ /* On 2425 initvals TURBO_SHORT is not present */ if (ah->ah_bwmode == AR5K_BWMODE_40MHZ) { - turbo = AR5K_PHY_TURBO_MODE | - (ah->ah_radio == AR5K_RF2425) ? 0 : - AR5K_PHY_TURBO_SHORT; + turbo = AR5K_PHY_TURBO_MODE; + if (ah->ah_radio != AR5K_RF2425) + turbo |= AR5K_PHY_TURBO_SHORT; } else if (ah->ah_bwmode != AR5K_BWMODE_DEFAULT) { if (ah->ah_radio == AR5K_RF5413) { mode |= (ah->ah_bwmode == AR5K_BWMODE_10MHZ) ? @@ -739,7 +817,7 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, struct ieee80211_channel *channel) /* ...update PLL if needed */ if (ath5k_hw_reg_read(ah, AR5K_PHY_PLL) != clock) { ath5k_hw_reg_write(ah, clock, AR5K_PHY_PLL); - udelay(300); + usleep_range(300, 350); } /* ...set the PHY operating mode */ @@ -755,8 +833,19 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, struct ieee80211_channel *channel) * Post-initvals register modifications * \**************************************/ -/* TODO: Half/Quarter rate */ -static void ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah, +/** + * ath5k_hw_tweak_initval_settings() - Tweak initial settings + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * + * Some settings are not handled on initvals, e.g. bwmode + * settings, some phy settings, workarounds etc that in general + * don't fit anywhere else or are too small to introduce a separate + * function for each one. So we have this function to handle + * them all during reset and complete card's initialization. + */ +static void +ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah, struct ieee80211_channel *channel) { if (ah->ah_version == AR5K_AR5212 && @@ -875,7 +964,16 @@ static void ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah, } } -static void ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah, +/** + * ath5k_hw_commit_eeprom_settings() - Commit settings from EEPROM + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * + * Use settings stored on EEPROM to properly initialize the card + * based on various infos and per-mode calibration data. + */ +static void +ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah, struct ieee80211_channel *channel) { struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; @@ -886,7 +984,7 @@ static void ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah, if (ah->ah_version == AR5K_AR5210) return; - ee_mode = ath5k_eeprom_mode_from_channel(channel); + ee_mode = ath5k_eeprom_mode_from_channel(ah, channel); /* Adjust power delta for channel 14 */ if (channel->center_freq == 2484) @@ -1029,7 +1127,23 @@ static void ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah, * Main reset function * \*********************/ -int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, +/** + * ath5k_hw_reset() - The main reset function + * @ah: The &struct ath5k_hw + * @op_mode: One of enum nl80211_iftype + * @channel: The &struct ieee80211_channel + * @fast: Enable fast channel switching + * @skip_pcu: Skip pcu initialization + * + * This is the function we call each time we want to (re)initialize the + * card and pass new settings to hw. We also call it when hw runs into + * trouble to make it come back to a working state. + * + * Returns 0 on success, -EINVAL on false op_mode or channel infos, or -EIO + * on failure. + */ +int +ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, struct ieee80211_channel *channel, bool fast, bool skip_pcu) { u32 s_seq[10], s_led[3], tsf_up, tsf_lo; @@ -1047,7 +1161,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, */ if (fast && (ah->ah_radio != AR5K_RF2413) && (ah->ah_radio != AR5K_RF5413)) - fast = 0; + fast = false; /* Disable sleep clock operation * to avoid register access delay on certain @@ -1073,7 +1187,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, if (ret && fast) { ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "DMA didn't stop, falling back to normal reset\n"); - fast = 0; + fast = false; /* Non fatal, just continue with * normal reset */ ret = 0; @@ -1242,7 +1356,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, /* * Initialize PCU */ - ath5k_hw_pcu_init(ah, op_mode, mode); + ath5k_hw_pcu_init(ah, op_mode); /* * Initialize PHY diff --git a/drivers/net/wireless/ath/ath5k/rfbuffer.h b/drivers/net/wireless/ath/ath5k/rfbuffer.h index 5d11c23b429..aed34d9954c 100644 --- a/drivers/net/wireless/ath/ath5k/rfbuffer.h +++ b/drivers/net/wireless/ath/ath5k/rfbuffer.h @@ -18,7 +18,9 @@ */ -/* +/** + * DOC: RF Buffer registers + * * There are some special registers on the RF chip * that control various operation settings related mostly to * the analog parts (channel, gain adjustment etc). @@ -44,40 +46,63 @@ */ -/* +/** + * struct ath5k_ini_rfbuffer - Initial RF Buffer settings + * @rfb_bank: RF Bank number + * @rfb_ctrl_register: RF Buffer control register + * @rfb_mode_data: RF Buffer data for each mode + * * Struct to hold default mode specific RF - * register values (RF Banks) + * register values (RF Banks) for each chip. */ struct ath5k_ini_rfbuffer { - u8 rfb_bank; /* RF Bank number */ - u16 rfb_ctrl_register; /* RF Buffer control register */ - u32 rfb_mode_data[3]; /* RF Buffer data for each mode */ + u8 rfb_bank; + u16 rfb_ctrl_register; + u32 rfb_mode_data[3]; }; -/* +/** + * struct ath5k_rfb_field - An RF Buffer field (register/value) + * @len: Field length + * @pos: Offset on the raw packet + * @col: Used for shifting + * * Struct to hold RF Buffer field * infos used to access certain RF * analog registers */ struct ath5k_rfb_field { - u8 len; /* Field length */ - u16 pos; /* Offset on the raw packet */ - u8 col; /* Column -used for shifting */ + u8 len; + u16 pos; + u8 col; }; -/* - * RF analog register definition +/** + * struct ath5k_rf_reg - RF analog register definition + * @bank: RF Buffer Bank number + * @index: Register's index on ath5k_rf_regx_idx + * @field: The &struct ath5k_rfb_field + * + * We use this struct to define the set of RF registers + * on each chip that we want to tweak. Some RF registers + * are common between different chip versions so this saves + * us space and complexity because we can refer to an rf + * register by it's index no matter what chip we work with + * as long as it has that register. */ struct ath5k_rf_reg { - u8 bank; /* RF Buffer Bank number */ - u8 index; /* Register's index on rf_regs_idx */ - struct ath5k_rfb_field field; /* RF Buffer field for this register */ + u8 bank; + u8 index; + struct ath5k_rfb_field field; }; -/* Map RF registers to indexes +/** + * enum ath5k_rf_regs_idx - Map RF registers to indexes + * * We do this to handle common bits and make our * life easier by using an index for each register - * instead of a full rfb_field */ + * instead of a full rfb_field + */ enum ath5k_rf_regs_idx { /* BANK 2 */ AR5K_RF_TURBO = 0, diff --git a/drivers/net/wireless/ath/ath5k/rfgain.h b/drivers/net/wireless/ath/ath5k/rfgain.h index ebfae052d89..4d21df0e597 100644 --- a/drivers/net/wireless/ath/ath5k/rfgain.h +++ b/drivers/net/wireless/ath/ath5k/rfgain.h @@ -18,13 +18,17 @@ * */ -/* +/** + * struct ath5k_ini_rfgain - RF Gain table + * @rfg_register: RF Gain register address + * @rfg_value: Register value for 5 and 2GHz + * * Mode-specific RF Gain table (64bytes) for RF5111/5112 * (RF5110 only comes with AR5210 and only supports a/turbo a mode so initial * RF Gain values are included in AR5K_AR5210_INI) */ struct ath5k_ini_rfgain { - u16 rfg_register; /* RF Gain register address */ + u16 rfg_register; u32 rfg_value[2]; /* [freq (see below)] */ }; @@ -455,18 +459,31 @@ static const struct ath5k_ini_rfgain rfgain_2425[] = { #define AR5K_GAIN_CHECK_ADJUST(_g) \ ((_g)->g_current <= (_g)->g_low || (_g)->g_current >= (_g)->g_high) +/** + * struct ath5k_gain_opt_step - An RF gain optimization step + * @gos_param: Set of parameters + * @gos_gain: Gain + */ struct ath5k_gain_opt_step { s8 gos_param[AR5K_GAIN_CRN_MAX_FIX_BITS]; s8 gos_gain; }; +/** + * struct ath5k_gain_opt - RF Gain optimization ladder + * @go_default: The default step + * @go_steps_count: How many optimization steps + * @go_step: Array of &struct ath5k_gain_opt_step + */ struct ath5k_gain_opt { u8 go_default; u8 go_steps_count; const struct ath5k_gain_opt_step go_step[AR5K_GAIN_STEP_COUNT]; }; + /* + * RF5111 * Parameters on gos_param: * 1) Tx clip PHY register * 2) PWD 90 RF register @@ -490,6 +507,7 @@ static const struct ath5k_gain_opt rfgain_opt_5111 = { }; /* + * RF5112 * Parameters on gos_param: * 1) Mixgain ovr RF register * 2) PWD 138 RF register diff --git a/drivers/net/wireless/ath/ath5k/sysfs.c b/drivers/net/wireless/ath/ath5k/sysfs.c index 9364da7bd13..04cf0ca7261 100644 --- a/drivers/net/wireless/ath/ath5k/sysfs.c +++ b/drivers/net/wireless/ath/ath5k/sysfs.c @@ -1,3 +1,5 @@ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/device.h> #include <linux/pci.h> diff --git a/drivers/net/wireless/ath/ath5k/trace.h b/drivers/net/wireless/ath/ath5k/trace.h index 39f002ed4a8..c6eef519bb6 100644 --- a/drivers/net/wireless/ath/ath5k/trace.h +++ b/drivers/net/wireless/ath/ath5k/trace.h @@ -3,7 +3,8 @@ #include <linux/tracepoint.h> -#ifndef CONFIG_ATH5K_TRACER + +#if !defined(CONFIG_ATH5K_TRACER) || defined(__CHECKER__) #undef TRACE_EVENT #define TRACE_EVENT(name, proto, ...) \ static inline void trace_ ## name(proto) {} @@ -93,10 +94,10 @@ TRACE_EVENT(ath5k_tx_complete, #endif /* __TRACE_ATH5K_H */ -#ifdef CONFIG_ATH5K_TRACER +#if defined(CONFIG_ATH5K_TRACER) && !defined(__CHECKER__) #undef TRACE_INCLUDE_PATH -#define TRACE_INCLUDE_PATH ../../drivers/net/wireless/ath/ath5k +#define TRACE_INCLUDE_PATH . #undef TRACE_INCLUDE_FILE #define TRACE_INCLUDE_FILE trace |