diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath5k/pcu.c')
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/pcu.c | 40 |
1 files changed, 19 insertions, 21 deletions
diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c index 712a9ac4000..06731384506 100644 --- a/drivers/net/wireless/ath/ath5k/pcu.c +++ b/drivers/net/wireless/ath/ath5k/pcu.c @@ -32,7 +32,7 @@ #include "base.h" /* - * AR5212+ can use higher rates for ack transmition + * AR5212+ can use higher rates for ack transmission * based on current tx rate instead of the base rate. * It does this to better utilize channel usage. * This is a mapping between G rates (that cover both @@ -77,14 +77,13 @@ static const unsigned int ack_rates_high[] = int ath5k_hw_get_frame_duration(struct ath5k_hw *ah, int len, struct ieee80211_rate *rate, bool shortpre) { - struct ath5k_softc *sc = ah->ah_sc; int sifs, preamble, plcp_bits, sym_time; int bitrate, bits, symbols, symbol_bits; int dur; /* Fallback */ if (!ah->ah_bwmode) { - __le16 raw_dur = ieee80211_generic_frame_duration(sc->hw, + __le16 raw_dur = ieee80211_generic_frame_duration(ah->hw, NULL, len, rate); /* subtract difference between long and short preamble */ @@ -205,7 +204,7 @@ unsigned int ath5k_hw_get_default_sifs(struct ath5k_hw *ah) */ void ath5k_hw_update_mib_counters(struct ath5k_hw *ah) { - struct ath5k_statistics *stats = &ah->ah_sc->stats; + struct ath5k_statistics *stats = &ah->stats; /* Read-And-Clear */ stats->ack_fail += ath5k_hw_reg_read(ah, AR5K_ACK_FAIL); @@ -240,25 +239,24 @@ void ath5k_hw_update_mib_counters(struct ath5k_hw *ah) */ static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah) { - struct ath5k_softc *sc = ah->ah_sc; struct ieee80211_rate *rate; unsigned int i; /* 802.11g covers both OFDM and CCK */ u8 band = IEEE80211_BAND_2GHZ; /* Write rate duration table */ - for (i = 0; i < sc->sbands[band].n_bitrates; i++) { + for (i = 0; i < ah->sbands[band].n_bitrates; i++) { u32 reg; u16 tx_time; if (ah->ah_ack_bitrate_high) - rate = &sc->sbands[band].bitrates[ack_rates_high[i]]; + rate = &ah->sbands[band].bitrates[ack_rates_high[i]]; /* CCK -> 1Mb */ else if (i < 4) - rate = &sc->sbands[band].bitrates[0]; + rate = &ah->sbands[band].bitrates[0]; /* OFDM -> 6Mb */ else - rate = &sc->sbands[band].bitrates[4]; + rate = &ah->sbands[band].bitrates[4]; /* Set ACK timeout */ reg = AR5K_RATE_DUR(rate->hw_value); @@ -534,9 +532,9 @@ u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah) local_irq_restore(flags); - WARN_ON( i == ATH5K_MAX_TSF_READ ); + WARN_ON(i == ATH5K_MAX_TSF_READ); - return (((u64)tsf_upper1 << 32) | tsf_lower); + return ((u64)tsf_upper1 << 32) | tsf_lower; } /** @@ -586,7 +584,7 @@ void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval) /* * Set the additional timers by mode */ - switch (ah->ah_sc->opmode) { + switch (ah->opmode) { case NL80211_IFTYPE_MONITOR: case NL80211_IFTYPE_STATION: /* In STA mode timer1 is used as next wakeup @@ -623,8 +621,8 @@ void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval) * Set the beacon register and enable all timers. */ /* When in AP or Mesh Point mode zero timer0 to start TSF */ - if (ah->ah_sc->opmode == NL80211_IFTYPE_AP || - ah->ah_sc->opmode == NL80211_IFTYPE_MESH_POINT) + if (ah->opmode == NL80211_IFTYPE_AP || + ah->opmode == NL80211_IFTYPE_MESH_POINT) ath5k_hw_reg_write(ah, 0, AR5K_TIMER0); ath5k_hw_reg_write(ah, next_beacon, AR5K_TIMER0); @@ -643,14 +641,14 @@ void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval) /* Flush any pending BMISS interrupts on ISR by * performing a clear-on-write operation on PISR * register for the BMISS bit (writing a bit on - * ISR togles a reset for that bit and leaves - * the rest bits intact) */ + * ISR toggles a reset for that bit and leaves + * the remaining bits intact) */ if (ah->ah_version == AR5K_AR5210) ath5k_hw_reg_write(ah, AR5K_ISR_BMISS, AR5K_ISR); else ath5k_hw_reg_write(ah, AR5K_ISR_BMISS, AR5K_PISR); - /* TODO: Set enchanced sleep registers on AR5212 + /* TODO: Set enhanced sleep registers on AR5212 * based on vif->bss_conf params, until then * disable power save reporting.*/ AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, AR5K_STA_ID1_PWR_SV); @@ -738,7 +736,7 @@ ath5k_hw_check_beacon_timers(struct ath5k_hw *ah, int intval) dma = ath5k_hw_reg_read(ah, AR5K_TIMER1) >> 3; /* NOTE: SWBA is different. Having a wrong window there does not - * stop us from sending data and this condition is catched thru + * stop us from sending data and this condition is caught by * other means (SWBA interrupt) */ if (ath5k_check_timer_win(nbtt, atim, 1, intval) && @@ -814,7 +812,7 @@ int ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype op_mode) struct ath_common *common = ath5k_hw_common(ah); u32 pcu_reg, beacon_reg, low_id, high_id; - ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_MODE, "mode %d\n", op_mode); + ATH5K_DBG(ah, ATH5K_DEBUG_MODE, "mode %d\n", op_mode); /* Preserve rest settings */ pcu_reg = ath5k_hw_reg_read(ah, AR5K_STA_ID1) & 0xffff0000; @@ -890,13 +888,13 @@ void ath5k_hw_pcu_init(struct ath5k_hw *ah, enum nl80211_iftype op_mode, * XXX: rethink this after new mode changes to * mac80211 are integrated */ if (ah->ah_version == AR5K_AR5212 && - ah->ah_sc->nvifs) + ah->nvifs) ath5k_hw_write_rate_duration(ah); /* Set RSSI/BRSSI thresholds * * Note: If we decide to set this value - * dynamicaly, have in mind that when AR5K_RSSI_THR + * dynamically, have in mind that when AR5K_RSSI_THR * register is read it might return 0x40 if we haven't * wrote anything to it plus BMISS RSSI threshold is zeroed. * So doing a save/restore procedure here isn't the right |