diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath5k/pci.c')
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/pci.c | 327 |
1 files changed, 327 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath5k/pci.c b/drivers/net/wireless/ath/ath5k/pci.c new file mode 100644 index 00000000000..7f8c5b0e9d2 --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/pci.c @@ -0,0 +1,327 @@ +/* + * Copyright (c) 2008-2009 Atheros Communications Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include <linux/nl80211.h> +#include <linux/pci.h> +#include <linux/pci-aspm.h> +#include "../ath.h" +#include "ath5k.h" +#include "debug.h" +#include "base.h" +#include "reg.h" + +/* Known PCI ids */ +static DEFINE_PCI_DEVICE_TABLE(ath5k_pci_id_table) = { + { PCI_VDEVICE(ATHEROS, 0x0207) }, /* 5210 early */ + { PCI_VDEVICE(ATHEROS, 0x0007) }, /* 5210 */ + { PCI_VDEVICE(ATHEROS, 0x0011) }, /* 5311 - this is on AHB bus !*/ + { PCI_VDEVICE(ATHEROS, 0x0012) }, /* 5211 */ + { PCI_VDEVICE(ATHEROS, 0x0013) }, /* 5212 */ + { PCI_VDEVICE(3COM_2, 0x0013) }, /* 3com 5212 */ + { PCI_VDEVICE(3COM, 0x0013) }, /* 3com 3CRDAG675 5212 */ + { PCI_VDEVICE(ATHEROS, 0x1014) }, /* IBM minipci 5212 */ + { PCI_VDEVICE(ATHEROS, 0x0014) }, /* 5212 combatible */ + { PCI_VDEVICE(ATHEROS, 0x0015) }, /* 5212 combatible */ + { PCI_VDEVICE(ATHEROS, 0x0016) }, /* 5212 combatible */ + { PCI_VDEVICE(ATHEROS, 0x0017) }, /* 5212 combatible */ + { PCI_VDEVICE(ATHEROS, 0x0018) }, /* 5212 combatible */ + { PCI_VDEVICE(ATHEROS, 0x0019) }, /* 5212 combatible */ + { PCI_VDEVICE(ATHEROS, 0x001a) }, /* 2413 Griffin-lite */ + { PCI_VDEVICE(ATHEROS, 0x001b) }, /* 5413 Eagle */ + { PCI_VDEVICE(ATHEROS, 0x001c) }, /* PCI-E cards */ + { PCI_VDEVICE(ATHEROS, 0x001d) }, /* 2417 Nala */ + { 0 } +}; +MODULE_DEVICE_TABLE(pci, ath5k_pci_id_table); + +/* return bus cachesize in 4B word units */ +static void ath5k_pci_read_cachesize(struct ath_common *common, int *csz) +{ + struct ath5k_softc *sc = (struct ath5k_softc *) common->priv; + u8 u8tmp; + + pci_read_config_byte(sc->pdev, PCI_CACHE_LINE_SIZE, &u8tmp); + *csz = (int)u8tmp; + + /* + * This check was put in to avoid "unplesant" consequences if + * the bootrom has not fully initialized all PCI devices. + * Sometimes the cache line size register is not set + */ + + if (*csz == 0) + *csz = L1_CACHE_BYTES >> 2; /* Use the default size */ +} + +/* + * Read from eeprom + */ +bool ath5k_pci_eeprom_read(struct ath_common *common, u32 offset, u16 *data) +{ + struct ath5k_hw *ah = (struct ath5k_hw *) common->ah; + u32 status, timeout; + + /* + * Initialize EEPROM access + */ + if (ah->ah_version == AR5K_AR5210) { + AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE); + (void)ath5k_hw_reg_read(ah, AR5K_EEPROM_BASE + (4 * offset)); + } else { + ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE); + AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD, + AR5K_EEPROM_CMD_READ); + } + + for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) { + status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS); + if (status & AR5K_EEPROM_STAT_RDDONE) { + if (status & AR5K_EEPROM_STAT_RDERR) + return -EIO; + *data = (u16)(ath5k_hw_reg_read(ah, AR5K_EEPROM_DATA) & + 0xffff); + return 0; + } + udelay(15); + } + + return -ETIMEDOUT; +} + +int ath5k_hw_read_srev(struct ath5k_hw *ah) +{ + ah->ah_mac_srev = ath5k_hw_reg_read(ah, AR5K_SREV); + return 0; +} + +/* Common ath_bus_opts structure */ +static const struct ath_bus_ops ath_pci_bus_ops = { + .ath_bus_type = ATH_PCI, + .read_cachesize = ath5k_pci_read_cachesize, + .eeprom_read = ath5k_pci_eeprom_read, +}; + +/********************\ +* PCI Initialization * +\********************/ + +static int __devinit +ath5k_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + void __iomem *mem; + struct ath5k_softc *sc; + struct ieee80211_hw *hw; + int ret; + u8 csz; + + /* + * L0s needs to be disabled on all ath5k cards. + * + * For distributions shipping with CONFIG_PCIEASPM (this will be enabled + * by default in the future in 2.6.36) this will also mean both L1 and + * L0s will be disabled when a pre 1.1 PCIe device is detected. We do + * know L1 works correctly even for all ath5k pre 1.1 PCIe devices + * though but cannot currently undue the effect of a blacklist, for + * details you can read pcie_aspm_sanity_check() and see how it adjusts + * the device link capability. + * + * It may be possible in the future to implement some PCI API to allow + * drivers to override blacklists for pre 1.1 PCIe but for now it is + * best to accept that both L0s and L1 will be disabled completely for + * distributions shipping with CONFIG_PCIEASPM rather than having this + * issue present. Motivation for adding this new API will be to help + * with power consumption for some of these devices. + */ + pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S); + + ret = pci_enable_device(pdev); + if (ret) { + dev_err(&pdev->dev, "can't enable device\n"); + goto err; + } + + /* XXX 32-bit addressing only */ + ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if (ret) { + dev_err(&pdev->dev, "32-bit DMA not available\n"); + goto err_dis; + } + + /* + * Cache line size is used to size and align various + * structures used to communicate with the hardware. + */ + pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz); + if (csz == 0) { + /* + * Linux 2.4.18 (at least) writes the cache line size + * register as a 16-bit wide register which is wrong. + * We must have this setup properly for rx buffer + * DMA to work so force a reasonable value here if it + * comes up zero. + */ + csz = L1_CACHE_BYTES >> 2; + pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz); + } + /* + * The default setting of latency timer yields poor results, + * set it to the value used by other systems. It may be worth + * tweaking this setting more. + */ + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8); + + /* Enable bus mastering */ + pci_set_master(pdev); + + /* + * Disable the RETRY_TIMEOUT register (0x41) to keep + * PCI Tx retries from interfering with C3 CPU state. + */ + pci_write_config_byte(pdev, 0x41, 0); + + ret = pci_request_region(pdev, 0, "ath5k"); + if (ret) { + dev_err(&pdev->dev, "cannot reserve PCI memory region\n"); + goto err_dis; + } + + mem = pci_iomap(pdev, 0, 0); + if (!mem) { + dev_err(&pdev->dev, "cannot remap PCI memory region\n") ; + ret = -EIO; + goto err_reg; + } + + /* + * Allocate hw (mac80211 main struct) + * and hw->priv (driver private data) + */ + hw = ieee80211_alloc_hw(sizeof(*sc), &ath5k_hw_ops); + if (hw == NULL) { + dev_err(&pdev->dev, "cannot allocate ieee80211_hw\n"); + ret = -ENOMEM; + goto err_map; + } + + dev_info(&pdev->dev, "registered as '%s'\n", wiphy_name(hw->wiphy)); + + sc = hw->priv; + sc->hw = hw; + sc->pdev = pdev; + sc->dev = &pdev->dev; + sc->irq = pdev->irq; + sc->devid = id->device; + sc->iobase = mem; /* So we can unmap it on detach */ + + /* Initialize */ + ret = ath5k_init_softc(sc, &ath_pci_bus_ops); + if (ret) + goto err_free; + + /* Set private data */ + pci_set_drvdata(pdev, hw); + + return 0; +err_free: + ieee80211_free_hw(hw); +err_map: + pci_iounmap(pdev, mem); +err_reg: + pci_release_region(pdev, 0); +err_dis: + pci_disable_device(pdev); +err: + return ret; +} + +static void __devexit +ath5k_pci_remove(struct pci_dev *pdev) +{ + struct ieee80211_hw *hw = pci_get_drvdata(pdev); + struct ath5k_softc *sc = hw->priv; + + ath5k_deinit_softc(sc); + pci_iounmap(pdev, sc->iobase); + pci_release_region(pdev, 0); + pci_disable_device(pdev); + ieee80211_free_hw(hw); +} + +#ifdef CONFIG_PM_SLEEP +static int ath5k_pci_suspend(struct device *dev) +{ + struct ath5k_softc *sc = pci_get_drvdata(to_pci_dev(dev)); + + ath5k_led_off(sc); + return 0; +} + +static int ath5k_pci_resume(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct ath5k_softc *sc = pci_get_drvdata(pdev); + + /* + * Suspend/Resume resets the PCI configuration space, so we have to + * re-disable the RETRY_TIMEOUT register (0x41) to keep + * PCI Tx retries from interfering with C3 CPU state + */ + pci_write_config_byte(pdev, 0x41, 0); + + ath5k_led_enable(sc); + return 0; +} + +static SIMPLE_DEV_PM_OPS(ath5k_pm_ops, ath5k_pci_suspend, ath5k_pci_resume); +#define ATH5K_PM_OPS (&ath5k_pm_ops) +#else +#define ATH5K_PM_OPS NULL +#endif /* CONFIG_PM_SLEEP */ + +static struct pci_driver ath5k_pci_driver = { + .name = KBUILD_MODNAME, + .id_table = ath5k_pci_id_table, + .probe = ath5k_pci_probe, + .remove = __devexit_p(ath5k_pci_remove), + .driver.pm = ATH5K_PM_OPS, +}; + +/* + * Module init/exit functions + */ +static int __init +init_ath5k_pci(void) +{ + int ret; + + ret = pci_register_driver(&ath5k_pci_driver); + if (ret) { + printk(KERN_ERR "ath5k_pci: can't register pci driver\n"); + return ret; + } + + return 0; +} + +static void __exit +exit_ath5k_pci(void) +{ + pci_unregister_driver(&ath5k_pci_driver); +} + +module_init(init_ath5k_pci); +module_exit(exit_ath5k_pci); |