diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath5k/base.c')
-rw-r--r-- | drivers/net/wireless/ath/ath5k/base.c | 321 |
1 files changed, 248 insertions, 73 deletions
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 3abbe7513ab..7f5953fac43 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -59,8 +59,8 @@ #include "base.h" #include "reg.h" #include "debug.h" +#include "ani.h" -static u8 ath5k_calinterval = 10; /* Calibrate PHY every 10 secs (TODO: Fixme) */ static int modparam_nohwcrypt; module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); @@ -199,7 +199,7 @@ static void __devexit ath5k_pci_remove(struct pci_dev *pdev); static int ath5k_pci_suspend(struct device *dev); static int ath5k_pci_resume(struct device *dev); -SIMPLE_DEV_PM_OPS(ath5k_pm_ops, ath5k_pci_suspend, ath5k_pci_resume); +static SIMPLE_DEV_PM_OPS(ath5k_pm_ops, ath5k_pci_suspend, ath5k_pci_resume); #define ATH5K_PM_OPS (&ath5k_pm_ops) #else #define ATH5K_PM_OPS NULL @@ -231,7 +231,7 @@ static void ath5k_remove_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif); static int ath5k_config(struct ieee80211_hw *hw, u32 changed); static u64 ath5k_prepare_multicast(struct ieee80211_hw *hw, - int mc_count, struct dev_addr_list *mc_list); + struct netdev_hw_addr_list *mc_list); static void ath5k_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags, unsigned int *new_flags, @@ -242,6 +242,8 @@ static int ath5k_set_key(struct ieee80211_hw *hw, struct ieee80211_key_conf *key); static int ath5k_get_stats(struct ieee80211_hw *hw, struct ieee80211_low_level_stats *stats); +static int ath5k_get_survey(struct ieee80211_hw *hw, + int idx, struct survey_info *survey); static u64 ath5k_get_tsf(struct ieee80211_hw *hw); static void ath5k_set_tsf(struct ieee80211_hw *hw, u64 tsf); static void ath5k_reset_tsf(struct ieee80211_hw *hw); @@ -267,6 +269,7 @@ static const struct ieee80211_ops ath5k_hw_ops = { .configure_filter = ath5k_configure_filter, .set_key = ath5k_set_key, .get_stats = ath5k_get_stats, + .get_survey = ath5k_get_survey, .conf_tx = NULL, .get_tsf = ath5k_get_tsf, .set_tsf = ath5k_set_tsf, @@ -308,7 +311,7 @@ static int ath5k_rxbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf); static int ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf, - struct ath5k_txq *txq); + struct ath5k_txq *txq, int padsize); static inline void ath5k_txbuf_free(struct ath5k_softc *sc, struct ath5k_buf *bf) { @@ -365,6 +368,7 @@ static void ath5k_beacon_send(struct ath5k_softc *sc); static void ath5k_beacon_config(struct ath5k_softc *sc); static void ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf); static void ath5k_tasklet_beacon(unsigned long data); +static void ath5k_tasklet_ani(unsigned long data); static inline u64 ath5k_extend_tsf(struct ath5k_hw *ah, u32 rstamp) { @@ -544,8 +548,7 @@ ath5k_pci_probe(struct pci_dev *pdev, SET_IEEE80211_DEV(hw, &pdev->dev); hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | - IEEE80211_HW_SIGNAL_DBM | - IEEE80211_HW_NOISE_DBM; + IEEE80211_HW_SIGNAL_DBM; hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_AP) | @@ -830,6 +833,7 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw) tasklet_init(&sc->restq, ath5k_tasklet_reset, (unsigned long)sc); tasklet_init(&sc->calib, ath5k_tasklet_calibrate, (unsigned long)sc); tasklet_init(&sc->beacontq, ath5k_tasklet_beacon, (unsigned long)sc); + tasklet_init(&sc->ani_tasklet, ath5k_tasklet_ani, (unsigned long)sc); ret = ath5k_eeprom_read_mac(ah, mac); if (ret) { @@ -1138,8 +1142,6 @@ ath5k_mode_setup(struct ath5k_softc *sc) struct ath5k_hw *ah = sc->ah; u32 rfilt; - ah->ah_op_mode = sc->opmode; - /* configure rx filter */ rfilt = sc->filter_flags; ath5k_hw_set_rx_filter(ah, rfilt); @@ -1148,8 +1150,9 @@ ath5k_mode_setup(struct ath5k_softc *sc) ath5k_hw_set_bssid_mask(ah, sc->bssidmask); /* configure operational mode */ - ath5k_hw_set_opmode(ah); + ath5k_hw_set_opmode(ah, sc->opmode); + ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "mode setup opmode %d\n", sc->opmode); ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "RX filter 0x%x\n", rfilt); } @@ -1272,7 +1275,7 @@ static enum ath5k_pkt_type get_hw_packet_type(struct sk_buff *skb) static int ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf, - struct ath5k_txq *txq) + struct ath5k_txq *txq, int padsize) { struct ath5k_hw *ah = sc->ah; struct ath5k_desc *ds = bf->desc; @@ -1324,7 +1327,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf, sc->vif, pktlen, info)); } ret = ah->ah_setup_tx_desc(ah, ds, pktlen, - ieee80211_get_hdrlen_from_skb(skb), + ieee80211_get_hdrlen_from_skb(skb), padsize, get_hw_packet_type(skb), (sc->power_level * 2), hw_rate, @@ -1636,7 +1639,6 @@ ath5k_txq_cleanup(struct ath5k_softc *sc) sc->txqs[i].link); } } - ieee80211_wake_queues(sc->hw); /* XXX move to callers */ for (i = 0; i < ARRAY_SIZE(sc->txqs); i++) if (sc->txqs[i].setup) @@ -1807,6 +1809,86 @@ ath5k_check_ibss_tsf(struct ath5k_softc *sc, struct sk_buff *skb, } static void +ath5k_update_beacon_rssi(struct ath5k_softc *sc, struct sk_buff *skb, int rssi) +{ + struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)skb->data; + struct ath5k_hw *ah = sc->ah; + struct ath_common *common = ath5k_hw_common(ah); + + /* only beacons from our BSSID */ + if (!ieee80211_is_beacon(mgmt->frame_control) || + memcmp(mgmt->bssid, common->curbssid, ETH_ALEN) != 0) + return; + + ah->ah_beacon_rssi_avg = ath5k_moving_average(ah->ah_beacon_rssi_avg, + rssi); + + /* in IBSS mode we should keep RSSI statistics per neighbour */ + /* le16_to_cpu(mgmt->u.beacon.capab_info) & WLAN_CAPABILITY_IBSS */ +} + +/* + * Compute padding position. skb must contains an IEEE 802.11 frame + */ +static int ath5k_common_padpos(struct sk_buff *skb) +{ + struct ieee80211_hdr * hdr = (struct ieee80211_hdr *)skb->data; + __le16 frame_control = hdr->frame_control; + int padpos = 24; + + if (ieee80211_has_a4(frame_control)) { + padpos += ETH_ALEN; + } + if (ieee80211_is_data_qos(frame_control)) { + padpos += IEEE80211_QOS_CTL_LEN; + } + + return padpos; +} + +/* + * This function expects a 802.11 frame and returns the number of + * bytes added, or -1 if we don't have enought header room. + */ + +static int ath5k_add_padding(struct sk_buff *skb) +{ + int padpos = ath5k_common_padpos(skb); + int padsize = padpos & 3; + + if (padsize && skb->len>padpos) { + + if (skb_headroom(skb) < padsize) + return -1; + + skb_push(skb, padsize); + memmove(skb->data, skb->data+padsize, padpos); + return padsize; + } + + return 0; +} + +/* + * This function expects a 802.11 frame and returns the number of + * bytes removed + */ + +static int ath5k_remove_padding(struct sk_buff *skb) +{ + int padpos = ath5k_common_padpos(skb); + int padsize = padpos & 3; + + if (padsize && skb->len>=padpos+padsize) { + memmove(skb->data + padsize, skb->data, padpos); + skb_pull(skb, padsize); + return padsize; + } + + return 0; +} + +static void ath5k_tasklet_rx(unsigned long data) { struct ieee80211_rx_status *rxs; @@ -1819,8 +1901,6 @@ ath5k_tasklet_rx(unsigned long data) struct ath5k_buf *bf; struct ath5k_desc *ds; int ret; - int hdrlen; - int padsize; int rx_flag; spin_lock(&sc->rxbuflock); @@ -1845,18 +1925,30 @@ ath5k_tasklet_rx(unsigned long data) break; else if (unlikely(ret)) { ATH5K_ERR(sc, "error in processing rx descriptor\n"); + sc->stats.rxerr_proc++; spin_unlock(&sc->rxbuflock); return; } + sc->stats.rx_all_count++; + if (unlikely(rs.rs_more)) { ATH5K_WARN(sc, "unsupported jumbo\n"); + sc->stats.rxerr_jumbo++; goto next; } if (unlikely(rs.rs_status)) { - if (rs.rs_status & AR5K_RXERR_PHY) + if (rs.rs_status & AR5K_RXERR_CRC) + sc->stats.rxerr_crc++; + if (rs.rs_status & AR5K_RXERR_FIFO) + sc->stats.rxerr_fifo++; + if (rs.rs_status & AR5K_RXERR_PHY) { + sc->stats.rxerr_phy++; + if (rs.rs_phyerr > 0 && rs.rs_phyerr < 32) + sc->stats.rxerr_phy_code[rs.rs_phyerr]++; goto next; + } if (rs.rs_status & AR5K_RXERR_DECRYPT) { /* * Decrypt error. If the error occurred @@ -1868,12 +1960,14 @@ ath5k_tasklet_rx(unsigned long data) * * XXX do key cache faulting */ + sc->stats.rxerr_decrypt++; if (rs.rs_keyix == AR5K_RXKEYIX_INVALID && !(rs.rs_status & AR5K_RXERR_CRC)) goto accept; } if (rs.rs_status & AR5K_RXERR_MIC) { rx_flag |= RX_FLAG_MMIC_ERROR; + sc->stats.rxerr_mic++; goto accept; } @@ -1905,12 +1999,8 @@ accept: * bytes and we can optimize this a bit. In addition, we must * not try to remove padding from short control frames that do * not have payload. */ - hdrlen = ieee80211_get_hdrlen_from_skb(skb); - padsize = ath5k_pad_size(hdrlen); - if (padsize) { - memmove(skb->data + padsize, skb->data, hdrlen); - skb_pull(skb, padsize); - } + ath5k_remove_padding(skb); + rxs = IEEE80211_SKB_RXCB(skb); /* @@ -1939,10 +2029,15 @@ accept: rxs->freq = sc->curchan->center_freq; rxs->band = sc->curband->band; - rxs->noise = sc->ah->ah_noise_floor; - rxs->signal = rxs->noise + rs.rs_rssi; + rxs->signal = sc->ah->ah_noise_floor + rs.rs_rssi; rxs->antenna = rs.rs_antenna; + + if (rs.rs_antenna > 0 && rs.rs_antenna < 5) + sc->stats.antenna_rx[rs.rs_antenna]++; + else + sc->stats.antenna_rx[0]++; /* invalid */ + rxs->rate_idx = ath5k_hw_to_driver_rix(sc, rs.rs_rate); rxs->flag |= ath5k_rx_decrypted(sc, ds, skb, &rs); @@ -1952,6 +2047,8 @@ accept: ath5k_debug_dump_skb(sc, skb, "RX ", 0); + ath5k_update_beacon_rssi(sc, skb, rs.rs_rssi); + /* check beacons in IBSS mode */ if (sc->opmode == NL80211_IFTYPE_ADHOC) ath5k_check_ibss_tsf(sc, skb, rxs); @@ -1988,6 +2085,17 @@ ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq) list_for_each_entry_safe(bf, bf0, &txq->q, list) { ds = bf->desc; + /* + * It's possible that the hardware can say the buffer is + * completed when it hasn't yet loaded the ds_link from + * host memory and moved on. If there are more TX + * descriptors in the queue, wait for TXDP to change + * before processing this one. + */ + if (ath5k_hw_get_txdp(sc->ah, txq->qnum) == bf->daddr && + !list_is_last(&bf->list, &txq->q)) + break; + ret = sc->ah->ah_proc_tx_desc(sc->ah, ds, &ts); if (unlikely(ret == -EINPROGRESS)) break; @@ -1997,6 +2105,7 @@ ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq) break; } + sc->stats.tx_all_count++; skb = bf->skb; info = IEEE80211_SKB_CB(skb); bf->skb = NULL; @@ -2022,14 +2131,31 @@ ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq) info->status.rates[ts.ts_final_idx].count++; if (unlikely(ts.ts_status)) { - sc->ll_stats.dot11ACKFailureCount++; - if (ts.ts_status & AR5K_TXERR_FILT) + sc->stats.ack_fail++; + if (ts.ts_status & AR5K_TXERR_FILT) { info->flags |= IEEE80211_TX_STAT_TX_FILTERED; + sc->stats.txerr_filt++; + } + if (ts.ts_status & AR5K_TXERR_XRETRY) + sc->stats.txerr_retry++; + if (ts.ts_status & AR5K_TXERR_FIFO) + sc->stats.txerr_fifo++; } else { info->flags |= IEEE80211_TX_STAT_ACK; info->status.ack_signal = ts.ts_rssi; } + /* + * Remove MAC header padding before giving the frame + * back to mac80211. + */ + ath5k_remove_padding(skb); + + if (ts.ts_antenna > 0 && ts.ts_antenna < 5) + sc->stats.antenna_tx[ts.ts_antenna]++; + else + sc->stats.antenna_tx[0]++; /* invalid */ + ieee80211_tx_status(sc->hw, skb); spin_lock(&sc->txbuflock); @@ -2073,6 +2199,7 @@ ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) int ret = 0; u8 antenna; u32 flags; + const int padsize = 0; bf->skbaddr = pci_map_single(sc->pdev, skb->data, skb->len, PCI_DMA_TODEVICE); @@ -2120,7 +2247,7 @@ ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) * from tx power (value is in dB units already) */ ds->ds_data = bf->skbaddr; ret = ah->ah_setup_tx_desc(ah, ds, skb->len, - ieee80211_get_hdrlen_from_skb(skb), + ieee80211_get_hdrlen_from_skb(skb), padsize, AR5K_PKT_TYPE_BEACON, (sc->power_level * 2), ieee80211_get_tx_rate(sc->hw, info)->hw_value, 1, AR5K_TXKEYIX_INVALID, @@ -2407,9 +2534,6 @@ ath5k_init(struct ath5k_softc *sc) */ ath5k_stop_locked(sc); - /* Set PHY calibration interval */ - ah->ah_cal_intval = ath5k_calinterval; - /* * The basic interface to setting the hardware in a good * state is ``reset''. On return the hardware is known to @@ -2421,7 +2545,8 @@ ath5k_init(struct ath5k_softc *sc) sc->curband = &sc->sbands[sc->curchan->band]; sc->imask = AR5K_INT_RXOK | AR5K_INT_RXERR | AR5K_INT_RXEOL | AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL | - AR5K_INT_FATAL | AR5K_INT_GLOBAL | AR5K_INT_SWI; + AR5K_INT_FATAL | AR5K_INT_GLOBAL | AR5K_INT_MIB; + ret = ath5k_reset(sc, NULL); if (ret) goto done; @@ -2435,8 +2560,7 @@ ath5k_init(struct ath5k_softc *sc) for (i = 0; i < AR5K_KEYTABLE_SIZE; i++) ath5k_hw_reset_key(ah, i); - /* Set ack to be sent at low bit-rates */ - ath5k_hw_set_ack_bitrate_high(ah, false); + ath5k_hw_set_ack_bitrate_high(ah, true); ret = 0; done: mmiowb(); @@ -2533,12 +2657,33 @@ ath5k_stop_hw(struct ath5k_softc *sc) tasklet_kill(&sc->restq); tasklet_kill(&sc->calib); tasklet_kill(&sc->beacontq); + tasklet_kill(&sc->ani_tasklet); ath5k_rfkill_hw_stop(sc->ah); return ret; } +static void +ath5k_intr_calibration_poll(struct ath5k_hw *ah) +{ + if (time_is_before_eq_jiffies(ah->ah_cal_next_ani) && + !(ah->ah_cal_mask & AR5K_CALIBRATION_FULL)) { + /* run ANI only when full calibration is not active */ + ah->ah_cal_next_ani = jiffies + + msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_ANI); + tasklet_schedule(&ah->ah_sc->ani_tasklet); + + } else if (time_is_before_eq_jiffies(ah->ah_cal_next_full)) { + ah->ah_cal_next_full = jiffies + + msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_FULL); + tasklet_schedule(&ah->ah_sc->calib); + } + /* we could use SWI to generate enough interrupts to meet our + * calibration interval requirements, if necessary: + * AR5K_REG_ENABLE_BITS(ah, AR5K_CR, AR5K_CR_SWI); */ +} + static irqreturn_t ath5k_intr(int irq, void *dev_id) { @@ -2562,7 +2707,20 @@ ath5k_intr(int irq, void *dev_id) */ tasklet_schedule(&sc->restq); } else if (unlikely(status & AR5K_INT_RXORN)) { - tasklet_schedule(&sc->restq); + /* + * Receive buffers are full. Either the bus is busy or + * the CPU is not fast enough to process all received + * frames. + * Older chipsets need a reset to come out of this + * condition, but we treat it as RX for newer chips. + * We don't know exactly which versions need a reset - + * this guess is copied from the HAL. + */ + sc->stats.rxorn_intr++; + if (ah->ah_mac_srev < AR5K_SREV_AR5212) + tasklet_schedule(&sc->restq); + else + tasklet_schedule(&sc->rxtq); } else { if (status & AR5K_INT_SWBA) { tasklet_hi_schedule(&sc->beacontq); @@ -2587,15 +2745,10 @@ ath5k_intr(int irq, void *dev_id) if (status & AR5K_INT_BMISS) { /* TODO */ } - if (status & AR5K_INT_SWI) { - tasklet_schedule(&sc->calib); - } if (status & AR5K_INT_MIB) { - /* - * These stats are also used for ANI i think - * so how about updating them more often ? - */ - ath5k_hw_update_mib_counters(ah, &sc->ll_stats); + sc->stats.mib_intr++; + ath5k_hw_update_mib_counters(ah); + ath5k_ani_mib_intr(ah); } if (status & AR5K_INT_GPIO) tasklet_schedule(&sc->rf_kill.toggleq); @@ -2606,7 +2759,7 @@ ath5k_intr(int irq, void *dev_id) if (unlikely(!counter)) ATH5K_WARN(sc, "too many interrupts, giving up for now\n"); - ath5k_hw_calibration_poll(ah); + ath5k_intr_calibration_poll(ah); return IRQ_HANDLED; } @@ -2630,8 +2783,7 @@ ath5k_tasklet_calibrate(unsigned long data) struct ath5k_hw *ah = sc->ah; /* Only full calibration for now */ - if (ah->ah_swi_mask != AR5K_SWI_FULL_CALIBRATION) - return; + ah->ah_cal_mask |= AR5K_CALIBRATION_FULL; /* Stop queues so that calibration * doesn't interfere with tx */ @@ -2647,18 +2799,29 @@ ath5k_tasklet_calibrate(unsigned long data) * to load new gain values. */ ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "calibration, resetting\n"); - ath5k_reset_wake(sc); + ath5k_reset(sc, sc->curchan); } if (ath5k_hw_phy_calibrate(ah, sc->curchan)) ATH5K_ERR(sc, "calibration of channel %u failed\n", ieee80211_frequency_to_channel( sc->curchan->center_freq)); - ah->ah_swi_mask = 0; - /* Wake queues */ ieee80211_wake_queues(sc->hw); + ah->ah_cal_mask &= ~AR5K_CALIBRATION_FULL; +} + + +static void +ath5k_tasklet_ani(unsigned long data) +{ + struct ath5k_softc *sc = (void *)data; + struct ath5k_hw *ah = sc->ah; + + ah->ah_cal_mask |= AR5K_CALIBRATION_ANI; + ath5k_ani_calibration(ah); + ah->ah_cal_mask &= ~AR5K_CALIBRATION_ANI; } @@ -2680,7 +2843,6 @@ static int ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb, struct ath5k_softc *sc = hw->priv; struct ath5k_buf *bf; unsigned long flags; - int hdrlen; int padsize; ath5k_debug_dump_skb(sc, skb, "TX ", 1); @@ -2692,17 +2854,11 @@ static int ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb, * the hardware expects the header padded to 4 byte boundaries * if this is not the case we add the padding after the header */ - hdrlen = ieee80211_get_hdrlen_from_skb(skb); - padsize = ath5k_pad_size(hdrlen); - if (padsize) { - - if (skb_headroom(skb) < padsize) { - ATH5K_ERR(sc, "tx hdrlen not %%4: %d not enough" - " headroom to pad %d\n", hdrlen, padsize); - goto drop_packet; - } - skb_push(skb, padsize); - memmove(skb->data, skb->data+padsize, hdrlen); + padsize = ath5k_add_padding(skb); + if (padsize < 0) { + ATH5K_ERR(sc, "tx hdrlen not %%4: not enough" + " headroom to pad"); + goto drop_packet; } spin_lock_irqsave(&sc->txbuflock, flags); @@ -2721,7 +2877,7 @@ static int ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb, bf->skb = skb; - if (ath5k_txbuf_setup(sc, bf, txq)) { + if (ath5k_txbuf_setup(sc, bf, txq, padsize)) { bf->skb = NULL; spin_lock_irqsave(&sc->txbuflock, flags); list_add_tail(&bf->list, &sc->txbuf); @@ -2768,6 +2924,8 @@ ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan) goto err; } + ath5k_ani_init(ah, ah->ah_sc->ani_state.ani_mode); + /* * Change channels and update the h/w rate map if we're switching; * e.g. 11a to 11b/g. @@ -2836,6 +2994,8 @@ static int ath5k_add_interface(struct ieee80211_hw *hw, goto end; } + ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "add interface mode %d\n", sc->opmode); + ath5k_hw_set_lladdr(sc->ah, vif->addr); ath5k_mode_setup(sc); @@ -2906,7 +3066,7 @@ ath5k_config(struct ieee80211_hw *hw, u32 changed) * then we must allow the user to set how many tx antennas we * have available */ - ath5k_hw_set_antenna_mode(ah, AR5K_ANTMODE_DEFAULT); + ath5k_hw_set_antenna_mode(ah, ah->ah_ant_mode); unlock: mutex_unlock(&sc->lock); @@ -2914,22 +3074,20 @@ unlock: } static u64 ath5k_prepare_multicast(struct ieee80211_hw *hw, - int mc_count, struct dev_addr_list *mclist) + struct netdev_hw_addr_list *mc_list) { u32 mfilt[2], val; - int i; u8 pos; + struct netdev_hw_addr *ha; mfilt[0] = 0; mfilt[1] = 1; - for (i = 0; i < mc_count; i++) { - if (!mclist) - break; + netdev_hw_addr_list_for_each(ha, mc_list) { /* calculate XOR of eight 6-bit values */ - val = get_unaligned_le32(mclist->dmi_addr + 0); + val = get_unaligned_le32(ha->addr + 0); pos = (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val; - val = get_unaligned_le32(mclist->dmi_addr + 3); + val = get_unaligned_le32(ha->addr + 3); pos ^= (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val; pos &= 0x3f; mfilt[pos / 32] |= (1 << (pos % 32)); @@ -2937,8 +3095,7 @@ static u64 ath5k_prepare_multicast(struct ieee80211_hw *hw, * but not sure, needs testing, if we do use this we'd * neet to inform below to not reset the mcast */ /* ath5k_hw_set_mcast_filterindex(ah, - * mclist->dmi_addr[5]); */ - mclist = mclist->next; + * ha->addr[5]); */ } return ((u64)(mfilt[1]) << 32) | mfilt[0]; @@ -3124,12 +3281,30 @@ ath5k_get_stats(struct ieee80211_hw *hw, struct ieee80211_low_level_stats *stats) { struct ath5k_softc *sc = hw->priv; - struct ath5k_hw *ah = sc->ah; /* Force update */ - ath5k_hw_update_mib_counters(ah, &sc->ll_stats); + ath5k_hw_update_mib_counters(sc->ah); + + stats->dot11ACKFailureCount = sc->stats.ack_fail; + stats->dot11RTSFailureCount = sc->stats.rts_fail; + stats->dot11RTSSuccessCount = sc->stats.rts_ok; + stats->dot11FCSErrorCount = sc->stats.fcs_error; + + return 0; +} + +static int ath5k_get_survey(struct ieee80211_hw *hw, int idx, + struct survey_info *survey) +{ + struct ath5k_softc *sc = hw->priv; + struct ieee80211_conf *conf = &hw->conf; + + if (idx != 0) + return -ENOENT; - memcpy(stats, &sc->ll_stats, sizeof(sc->ll_stats)); + survey->channel = conf->channel; + survey->filled = SURVEY_INFO_NOISE_DBM; + survey->noise = sc->ah->ah_noise_floor; return 0; } |