1 files changed, 82 insertions, 17 deletions

diff --git a/drivers/net/wireless/ath/ar9170/phy.c b/drivers/net/wireless/ath/ar9170/phy.c
index dbd488da18b..45a415ea809 100644
--- a/drivers/net/wireless/ath/ar9170/phy.c
+++ b/drivers/net/wireless/ath/ar9170/phy.c
@@ -1239,9 +1239,6 @@ static u8 ar9170_get_max_edge_power(struct ar9170 *ar,
 				    struct ar9170_calctl_edges edges[],
 				    u32 freq)
 {
-/* TODO: move somewhere else */
-#define AR5416_MAX_RATE_POWER        63
-
 	int i;
 	u8 rc = AR5416_MAX_RATE_POWER;
 	u8 f;
@@ -1259,10 +1256,11 @@ static u8 ar9170_get_max_edge_power(struct ar9170 *ar,
 			break;
 		}
 		if (i > 0 && f < edges[i].channel) {
-			if (f > edges[i-1].channel &&
-			    edges[i-1].power_flags & AR9170_CALCTL_EDGE_FLAGS) {
+			if (f > edges[i - 1].channel &&
+			    edges[i - 1].power_flags &
+			    AR9170_CALCTL_EDGE_FLAGS) {
 				/* lower channel has the inband flag set */
-				rc = edges[i-1].power_flags &
+				rc = edges[i - 1].power_flags &
 					~AR9170_CALCTL_EDGE_FLAGS;
 			}
 			break;
@@ -1270,18 +1268,48 @@ static u8 ar9170_get_max_edge_power(struct ar9170 *ar,
 	}
 
 	if (i == AR5416_NUM_BAND_EDGES) {
-		if (f > edges[i-1].channel &&
-		    edges[i-1].power_flags & AR9170_CALCTL_EDGE_FLAGS) {
+		if (f > edges[i - 1].channel &&
+		    edges[i - 1].power_flags & AR9170_CALCTL_EDGE_FLAGS) {
 			/* lower channel has the inband flag set */
-			rc = edges[i-1].power_flags &
+			rc = edges[i - 1].power_flags &
 				~AR9170_CALCTL_EDGE_FLAGS;
 		}
 	}
 	return rc;
 }
 
-/* calculate the conformance test limits and apply them to ar->power*
- * (derived from otus hal/hpmain.c, line 3706 ff.)
+static u8 ar9170_get_heavy_clip(struct ar9170 *ar,
+				struct ar9170_calctl_edges edges[],
+				u32 freq, enum ar9170_bw bw)
+{
+	u8 f;
+	int i;
+	u8 rc = 0;
+
+	if (freq < 3000)
+		f = freq - 2300;
+	else
+		f = (freq - 4800) / 5;
+
+	if (bw == AR9170_BW_40_BELOW || bw == AR9170_BW_40_ABOVE)
+		rc |= 0xf0;
+
+	for (i = 0; i < AR5416_NUM_BAND_EDGES; i++) {
+		if (edges[i].channel == 0xff)
+			break;
+		if (f == edges[i].channel) {
+			if (!(edges[i].power_flags & AR9170_CALCTL_EDGE_FLAGS))
+				rc |= 0x0f;
+			break;
+		}
+	}
+
+	return rc;
+}
+
+/*
+ * calculate the conformance test limits and the heavy clip parameter
+ * and apply them to ar->power* (derived from otus hal/hpmain.c, line 3706)
  */
 static void ar9170_calc_ctl(struct ar9170 *ar, u32 freq, enum ar9170_bw bw)
 {
@@ -1295,7 +1323,8 @@ static void ar9170_calc_ctl(struct ar9170 *ar, u32 freq, enum ar9170_bw bw)
 		int pwr_cal_len;
 	} *modes;
 
-	/* order is relevant in the mode_list_*: we fall back to the
+	/*
+	 * order is relevant in the mode_list_*: we fall back to the
 	 * lower indices if any mode is missed in the EEPROM.
 	 */
 	struct ctl_modes mode_list_2ghz[] = {
@@ -1313,7 +1342,10 @@ static void ar9170_calc_ctl(struct ar9170 *ar, u32 freq, enum ar9170_bw bw)
 
 #define EDGES(c, n) (ar->eeprom.ctl_data[c].control_edges[n])
 
-	/* TODO: investigate the differences between OTUS'
+	ar->phy_heavy_clip = 0;
+
+	/*
+	 * TODO: investigate the differences between OTUS'
 	 * hpreg.c::zfHpGetRegulatoryDomain() and
 	 * ath/regd.c::ath_regd_get_band_ctl() -
 	 * e.g. for FCC3_WORLD the OTUS procedure
@@ -1347,6 +1379,15 @@ static void ar9170_calc_ctl(struct ar9170 *ar, u32 freq, enum ar9170_bw bw)
 		if (ctl_idx < AR5416_NUM_CTLS) {
 			int f_off = 0;
 
+			/* determine heav clip parameter from
+			   the 11G edges array */
+			if (modes[i].ctl_mode == CTL_11G) {
+				ar->phy_heavy_clip =
+					ar9170_get_heavy_clip(ar,
+							      EDGES(ctl_idx, 1),
+							      freq, bw);
+			}
+
 			/* adjust freq for 40MHz */
 			if (modes[i].ctl_mode == CTL_2GHT40 ||
 			    modes[i].ctl_mode == CTL_5GHT40) {
@@ -1360,13 +1401,15 @@ static void ar9170_calc_ctl(struct ar9170 *ar, u32 freq, enum ar9170_bw bw)
 				ar9170_get_max_edge_power(ar, EDGES(ctl_idx, 1),
 							  freq+f_off);
 
-			/* TODO: check if the regulatory max. power is
+			/*
+			 * TODO: check if the regulatory max. power is
 			 *  controlled by cfg80211 for DFS
 			 * (hpmain applies it to max_power itself for DFS freq)
 			 */
 
 		} else {
-			/* Workaround in otus driver, hpmain.c, line 3906:
+			/*
+			 * Workaround in otus driver, hpmain.c, line 3906:
 			 * if no data for 5GHT20 are found, take the
 			 * legacy 5G value.
 			 * We extend this here to fallback from any other *HT or
@@ -1390,6 +1433,19 @@ static void ar9170_calc_ctl(struct ar9170 *ar, u32 freq, enum ar9170_bw bw)
 						       modes[i].max_power);
 		}
 	}
+
+	if (ar->phy_heavy_clip & 0xf0) {
+		ar->power_2G_ht40[0]--;
+		ar->power_2G_ht40[1]--;
+		ar->power_2G_ht40[2]--;
+	}
+	if (ar->phy_heavy_clip & 0xf) {
+		ar->power_2G_ht20[0]++;
+		ar->power_2G_ht20[1]++;
+		ar->power_2G_ht20[2]++;
+	}
+
+
 #undef EDGES
 }
 
@@ -1499,8 +1555,6 @@ static int ar9170_set_power_cal(struct ar9170 *ar, u32 freq, enum ar9170_bw bw)
 	/* calc. conformance test limits and apply to ar->power*[] */
 	ar9170_calc_ctl(ar, freq, bw);
 
-	/* TODO: (heavy clip) regulatory domain power level fine-tuning. */
-
 	/* set ACK/CTS TX power */
 	ar9170_regwrite_begin(ar);
 
@@ -1643,6 +1697,17 @@ int ar9170_set_channel(struct ar9170 *ar, struct ieee80211_channel *channel,
 	if (err)
 		return err;
 
+	if (ar->phy_heavy_clip) {
+		err = ar9170_write_reg(ar, 0x1c59e0,
+				       0x200 | ar->phy_heavy_clip);
+		if (err) {
+			if (ar9170_nag_limiter(ar))
+				printk(KERN_ERR "%s: failed to set "
+				       "heavy clip\n",
+				       wiphy_name(ar->hw->wiphy));
+		}
+	}
+
 	for (i = 0; i < 2; i++) {
 		ar->noise[i] = ar9170_calc_noise_dbm(
 				(le32_to_cpu(vals[2 + i]) >> 19) & 0x1ff);