diff options
Diffstat (limited to 'drivers/net/wan/sdlamain.c')
| -rw-r--r-- | drivers/net/wan/sdlamain.c | 1346 |
1 files changed, 0 insertions, 1346 deletions
diff --git a/drivers/net/wan/sdlamain.c b/drivers/net/wan/sdlamain.c deleted file mode 100644 index 7a8b22a7ea3..00000000000 --- a/drivers/net/wan/sdlamain.c +++ /dev/null @@ -1,1346 +0,0 @@ -/**************************************************************************** -* sdlamain.c WANPIPE(tm) Multiprotocol WAN Link Driver. Main module. -* -* Author: Nenad Corbic <ncorbic@sangoma.com> -* Gideon Hack -* -* Copyright: (c) 1995-2000 Sangoma Technologies Inc. -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version -* 2 of the License, or (at your option) any later version. -* ============================================================================ -* Dec 22, 2000 Nenad Corbic Updated for 2.4.X kernels. -* Removed the polling routine. -* Nov 13, 2000 Nenad Corbic Added hw probing on module load and dynamic -* device allocation. -* Nov 7, 2000 Nenad Corbic Fixed the Multi-Port PPP for kernels -* 2.2.16 and above. -* Aug 2, 2000 Nenad Corbic Block the Multi-Port PPP from running on -* kernels 2.2.16 or greater. The SyncPPP -* has changed. -* Jul 25, 2000 Nenad Corbic Updated the Piggiback support for MultPPPP. -* Jul 13, 2000 Nenad Corbic Added Multi-PPP support. -* Feb 02, 2000 Nenad Corbic Fixed up piggyback probing and selection. -* Sep 23, 1999 Nenad Corbic Added support for SMP -* Sep 13, 1999 Nenad Corbic Each port is treated as a separate device. -* Jun 02, 1999 Gideon Hack Added support for the S514 adapter. -* Updates for Linux 2.2.X kernels. -* Sep 17, 1998 Jaspreet Singh Updated for 2.1.121+ kernel -* Nov 28, 1997 Jaspreet Singh Changed DRV_RELEASE to 1 -* Nov 10, 1997 Jaspreet Singh Changed sti() to restore_flags(); -* Nov 06, 1997 Jaspreet Singh Changed DRV_VERSION to 4 and DRV_RELEASE to 0 -* Oct 20, 1997 Jaspreet Singh Modified sdla_isr routine so that card->in_isr -* assignments are taken out and placed in the -* sdla_ppp.c, sdla_fr.c and sdla_x25.c isr -* routines. Took out 'wandev->tx_int_enabled' and -* replaced it with 'wandev->enable_tx_int'. -* May 29, 1997 Jaspreet Singh Flow Control Problem -* added "wandev->tx_int_enabled=1" line in the -* init module. This line initializes the flag for -* preventing Interrupt disabled with device set to -* busy -* Jan 15, 1997 Gene Kozin Version 3.1.0 -* o added UDP management stuff -* Jan 02, 1997 Gene Kozin Initial version. -*****************************************************************************/ - -#include <linux/config.h> /* OS configuration options */ -#include <linux/stddef.h> /* offsetof(), etc. */ -#include <linux/errno.h> /* return codes */ -#include <linux/string.h> /* inline memset(), etc. */ -#include <linux/init.h> -#include <linux/slab.h> /* kmalloc(), kfree() */ -#include <linux/kernel.h> /* printk(), and other useful stuff */ -#include <linux/module.h> /* support for loadable modules */ -#include <linux/ioport.h> /* request_region(), release_region() */ -#include <linux/wanrouter.h> /* WAN router definitions */ -#include <linux/wanpipe.h> /* WANPIPE common user API definitions */ -#include <linux/rcupdate.h> - -#include <linux/in.h> -#include <asm/io.h> /* phys_to_virt() */ -#include <linux/pci.h> -#include <linux/sdlapci.h> -#include <linux/if_wanpipe_common.h> - -#include <asm/uaccess.h> /* kernel <-> user copy */ -#include <linux/inetdevice.h> - -#include <linux/ip.h> -#include <net/route.h> - -#define KMEM_SAFETYZONE 8 - - -#ifndef CONFIG_WANPIPE_FR - #define wpf_init(a,b) (-EPROTONOSUPPORT) -#endif - -#ifndef CONFIG_WANPIPE_CHDLC - #define wpc_init(a,b) (-EPROTONOSUPPORT) -#endif - -#ifndef CONFIG_WANPIPE_X25 - #define wpx_init(a,b) (-EPROTONOSUPPORT) -#endif - -#ifndef CONFIG_WANPIPE_PPP - #define wpp_init(a,b) (-EPROTONOSUPPORT) -#endif - -#ifndef CONFIG_WANPIPE_MULTPPP - #define wsppp_init(a,b) (-EPROTONOSUPPORT) -#endif - - -/***********FOR DEBUGGING PURPOSES********************************************* -static void * dbg_kmalloc(unsigned int size, int prio, int line) { - int i = 0; - void * v = kmalloc(size+sizeof(unsigned int)+2*KMEM_SAFETYZONE*8,prio); - char * c1 = v; - c1 += sizeof(unsigned int); - *((unsigned int *)v) = size; - - for (i = 0; i < KMEM_SAFETYZONE; i++) { - c1[0] = 'D'; c1[1] = 'E'; c1[2] = 'A'; c1[3] = 'D'; - c1[4] = 'B'; c1[5] = 'E'; c1[6] = 'E'; c1[7] = 'F'; - c1 += 8; - } - c1 += size; - for (i = 0; i < KMEM_SAFETYZONE; i++) { - c1[0] = 'M'; c1[1] = 'U'; c1[2] = 'N'; c1[3] = 'G'; - c1[4] = 'W'; c1[5] = 'A'; c1[6] = 'L'; c1[7] = 'L'; - c1 += 8; - } - v = ((char *)v) + sizeof(unsigned int) + KMEM_SAFETYZONE*8; - printk(KERN_INFO "line %d kmalloc(%d,%d) = %p\n",line,size,prio,v); - return v; -} -static void dbg_kfree(void * v, int line) { - unsigned int * sp = (unsigned int *)(((char *)v) - (sizeof(unsigned int) + KMEM_SAFETYZONE*8)); - unsigned int size = *sp; - char * c1 = ((char *)v) - KMEM_SAFETYZONE*8; - int i = 0; - for (i = 0; i < KMEM_SAFETYZONE; i++) { - if ( c1[0] != 'D' || c1[1] != 'E' || c1[2] != 'A' || c1[3] != 'D' - || c1[4] != 'B' || c1[5] != 'E' || c1[6] != 'E' || c1[7] != 'F') { - printk(KERN_INFO "kmalloced block at %p has been corrupted (underrun)!\n",v); - printk(KERN_INFO " %4x: %2x %2x %2x %2x %2x %2x %2x %2x\n", i*8, - c1[0],c1[1],c1[2],c1[3],c1[4],c1[5],c1[6],c1[7] ); - } - c1 += 8; - } - c1 += size; - for (i = 0; i < KMEM_SAFETYZONE; i++) { - if ( c1[0] != 'M' || c1[1] != 'U' || c1[2] != 'N' || c1[3] != 'G' - || c1[4] != 'W' || c1[5] != 'A' || c1[6] != 'L' || c1[7] != 'L' - ) { - printk(KERN_INFO "kmalloced block at %p has been corrupted (overrun):\n",v); - printk(KERN_INFO " %4x: %2x %2x %2x %2x %2x %2x %2x %2x\n", i*8, - c1[0],c1[1],c1[2],c1[3],c1[4],c1[5],c1[6],c1[7] ); - } - c1 += 8; - } - printk(KERN_INFO "line %d kfree(%p)\n",line,v); - v = ((char *)v) - (sizeof(unsigned int) + KMEM_SAFETYZONE*8); - kfree(v); -} - -#define kmalloc(x,y) dbg_kmalloc(x,y,__LINE__) -#define kfree(x) dbg_kfree(x,__LINE__) -******************************************************************************/ - - - -/****** Defines & Macros ****************************************************/ - -#ifdef _DEBUG_ -#define STATIC -#else -#define STATIC static -#endif - -#define DRV_VERSION 5 /* version number */ -#define DRV_RELEASE 0 /* release (minor version) number */ -#define MAX_CARDS 16 /* max number of adapters */ - -#ifndef CONFIG_WANPIPE_CARDS /* configurable option */ -#define CONFIG_WANPIPE_CARDS 1 -#endif - -#define CMD_OK 0 /* normal firmware return code */ -#define CMD_TIMEOUT 0xFF /* firmware command timed out */ -#define MAX_CMD_RETRY 10 /* max number of firmware retries */ -/****** Function Prototypes *************************************************/ - -extern void disable_irq(unsigned int); -extern void enable_irq(unsigned int); - -/* WAN link driver entry points */ -static int setup(struct wan_device* wandev, wandev_conf_t* conf); -static int shutdown(struct wan_device* wandev); -static int ioctl(struct wan_device* wandev, unsigned cmd, unsigned long arg); - -/* IOCTL handlers */ -static int ioctl_dump (sdla_t* card, sdla_dump_t* u_dump); -static int ioctl_exec (sdla_t* card, sdla_exec_t* u_exec, int); - -/* Miscellaneous functions */ -STATIC irqreturn_t sdla_isr (int irq, void* dev_id, struct pt_regs *regs); -static void release_hw (sdla_t *card); - -static int check_s508_conflicts (sdla_t* card,wandev_conf_t* conf, int*); -static int check_s514_conflicts (sdla_t* card,wandev_conf_t* conf, int*); - - -/****** Global Data ********************************************************** - * Note: All data must be explicitly initialized!!! - */ - -/* private data */ -static char drvname[] = "wanpipe"; -static char fullname[] = "WANPIPE(tm) Multiprotocol Driver"; -static char copyright[] = "(c) 1995-2000 Sangoma Technologies Inc."; -static int ncards; -static sdla_t* card_array; /* adapter data space */ - -/* Wanpipe's own workqueue, used for all API's. - * All protocol specific tasks will be inserted - * into the "wanpipe_wq" workqueue. - - * The kernel workqueue mechanism will execute - * all pending tasks in the "wanpipe_wq" workqueue. - */ - -struct workqueue_struct *wanpipe_wq; -DECLARE_WORK(wanpipe_work, NULL, NULL); - -static int wanpipe_bh_critical; - -/******* Kernel Loadable Module Entry Points ********************************/ - -/*============================================================================ - * Module 'insert' entry point. - * o print announcement - * o allocate adapter data space - * o initialize static data - * o register all cards with WAN router - * o calibrate SDLA shared memory access delay. - * - * Return: 0 Ok - * < 0 error. - * Context: process - */ - -static int __init wanpipe_init(void) -{ - int cnt, err = 0; - - printk(KERN_INFO "%s v%u.%u %s\n", - fullname, DRV_VERSION, DRV_RELEASE, copyright); - - wanpipe_wq = create_workqueue("wanpipe_wq"); - if (!wanpipe_wq) - return -ENOMEM; - - /* Probe for wanpipe cards and return the number found */ - printk(KERN_INFO "wanpipe: Probing for WANPIPE hardware.\n"); - ncards = wanpipe_hw_probe(); - if (ncards){ - printk(KERN_INFO "wanpipe: Allocating maximum %i devices: wanpipe%i - wanpipe%i.\n",ncards,1,ncards); - }else{ - printk(KERN_INFO "wanpipe: No S514/S508 cards found, unloading modules!\n"); - destroy_workqueue(wanpipe_wq); - return -ENODEV; - } - - /* Verify number of cards and allocate adapter data space */ - card_array = kmalloc(sizeof(sdla_t) * ncards, GFP_KERNEL); - if (card_array == NULL) { - destroy_workqueue(wanpipe_wq); - return -ENOMEM; - } - - memset(card_array, 0, sizeof(sdla_t) * ncards); - - /* Register adapters with WAN router */ - for (cnt = 0; cnt < ncards; ++ cnt) { - sdla_t* card = &card_array[cnt]; - struct wan_device* wandev = &card->wandev; - - card->next = NULL; - sprintf(card->devname, "%s%d", drvname, cnt + 1); - wandev->magic = ROUTER_MAGIC; - wandev->name = card->devname; - wandev->private = card; - wandev->enable_tx_int = 0; - wandev->setup = &setup; - wandev->shutdown = &shutdown; - wandev->ioctl = &ioctl; - err = register_wan_device(wandev); - if (err) { - printk(KERN_INFO - "%s: %s registration failed with error %d!\n", - drvname, card->devname, err); - break; - } - } - if (cnt){ - ncards = cnt; /* adjust actual number of cards */ - }else { - kfree(card_array); - destroy_workqueue(wanpipe_wq); - printk(KERN_INFO "IN Init Module: NO Cards registered\n"); - err = -ENODEV; - } - - return err; -} - -/*============================================================================ - * Module 'remove' entry point. - * o unregister all adapters from the WAN router - * o release all remaining system resources - */ -static void __exit wanpipe_cleanup(void) -{ - int i; - - if (!ncards) - return; - - for (i = 0; i < ncards; ++i) { - sdla_t* card = &card_array[i]; - unregister_wan_device(card->devname); - } - destroy_workqueue(wanpipe_wq); - kfree(card_array); - - printk(KERN_INFO "\nwanpipe: WANPIPE Modules Unloaded.\n"); -} - -module_init(wanpipe_init); -module_exit(wanpipe_cleanup); - -/******* WAN Device Driver Entry Points *************************************/ - -/*============================================================================ - * Setup/configure WAN link driver. - * o check adapter state - * o make sure firmware is present in configuration - * o make sure I/O port and IRQ are specified - * o make sure I/O region is available - * o allocate interrupt vector - * o setup SDLA hardware - * o call appropriate routine to perform protocol-specific initialization - * o mark I/O region as used - * o if this is the first active card, then schedule background task - * - * This function is called when router handles ROUTER_SETUP IOCTL. The - * configuration structure is in kernel memory (including extended data, if - * any). - */ - -static int setup(struct wan_device* wandev, wandev_conf_t* conf) -{ - sdla_t* card; - int err = 0; - int irq=0; - - /* Sanity checks */ - if ((wandev == NULL) || (wandev->private == NULL) || (conf == NULL)){ - printk(KERN_INFO - "%s: Failed Sdlamain Setup wandev %u, card %u, conf %u !\n", - wandev->name, - (unsigned int)wandev,(unsigned int)wandev->private, - (unsigned int)conf); - return -EFAULT; - } - - printk(KERN_INFO "%s: Starting WAN Setup\n", wandev->name); - - card = wandev->private; - if (wandev->state != WAN_UNCONFIGURED){ - printk(KERN_INFO "%s: failed sdlamain setup, busy!\n", - wandev->name); - return -EBUSY; /* already configured */ - } - - printk(KERN_INFO "\nProcessing WAN device %s...\n", wandev->name); - - /* Initialize the counters for each wandev - * Used for counting number of times new_if and - * del_if get called. - */ - wandev->del_if_cnt = 0; - wandev->new_if_cnt = 0; - wandev->config_id = conf->config_id; - - if (!conf->data_size || (conf->data == NULL)) { - printk(KERN_INFO - "%s: firmware not found in configuration data!\n", - wandev->name); - return -EINVAL; - } - - /* Check for resource conflicts and setup the - * card for piggibacking if necessary */ - if(!conf->S514_CPU_no[0]) { - if ((err=check_s508_conflicts(card,conf,&irq)) != 0){ - return err; - } - }else { - if ((err=check_s514_conflicts(card,conf,&irq)) != 0){ - return err; - } - } - - /* If the current card has already been configured - * or it's a piggyback card, do not try to allocate - * resources. - */ - if (!card->wandev.piggyback && !card->configured){ - - /* Configure hardware, load firmware, etc. */ - memset(&card->hw, 0, sizeof(sdlahw_t)); - - /* for an S514 adapter, pass the CPU number and the slot number read */ - /* from 'router.conf' to the 'sdla_setup()' function via the 'port' */ - /* parameter */ - if (conf->S514_CPU_no[0]){ - - card->hw.S514_cpu_no[0] = conf->S514_CPU_no[0]; - card->hw.S514_slot_no = conf->PCI_slot_no; - card->hw.auto_pci_cfg = conf->auto_pci_cfg; - - if (card->hw.auto_pci_cfg == WANOPT_YES){ - printk(KERN_INFO "%s: Setting CPU to %c and Slot to Auto\n", - card->devname, card->hw.S514_cpu_no[0]); - }else{ - printk(KERN_INFO "%s: Setting CPU to %c and Slot to %i\n", - card->devname, card->hw.S514_cpu_no[0], card->hw.S514_slot_no); - } - - }else{ - /* 508 Card io port and irq initialization */ - card->hw.port = conf->ioport; - card->hw.irq = (conf->irq == 9) ? 2 : conf->irq; - } - - - /* Compute the virtual address of the card in kernel space */ - if(conf->maddr){ - card->hw.dpmbase = phys_to_virt(conf->maddr); - }else{ - card->hw.dpmbase = (void *)conf->maddr; - } - - card->hw.dpmsize = SDLA_WINDOWSIZE; - - /* set the adapter type if using an S514 adapter */ - card->hw.type = (conf->S514_CPU_no[0]) ? SDLA_S514 : conf->hw_opt[0]; - card->hw.pclk = conf->hw_opt[1]; - - err = sdla_setup(&card->hw, conf->data, conf->data_size); - if (err){ - printk(KERN_INFO "%s: Hardware setup Failed %i\n", - card->devname,err); - return err; - } - - if(card->hw.type != SDLA_S514) - irq = (conf->irq == 2) ? 9 : conf->irq; /* IRQ2 -> IRQ9 */ - else - irq = card->hw.irq; - - /* request an interrupt vector - note that interrupts may be shared */ - /* when using the S514 PCI adapter */ - - if(request_irq(irq, sdla_isr, - (card->hw.type == SDLA_S514) ? SA_SHIRQ : 0, - wandev->name, card)){ - - printk(KERN_INFO "%s: Can't reserve IRQ %d!\n", wandev->name, irq); - return -EINVAL; - } - - }else{ - printk(KERN_INFO "%s: Card Configured %lu or Piggybacking %i!\n", - wandev->name,card->configured,card->wandev.piggyback); - } - - - if (!card->configured){ - - /* Initialize the Spin lock */ - printk(KERN_INFO "%s: Initializing for SMP\n",wandev->name); - - /* Piggyback spin lock has already been initialized, - * in check_s514/s508_conflicts() */ - if (!card->wandev.piggyback){ - spin_lock_init(&card->wandev.lock); - } - - /* Intialize WAN device data space */ - wandev->irq = irq; - wandev->dma = 0; - if(card->hw.type != SDLA_S514){ - wandev->ioport = card->hw.port; - }else{ - wandev->S514_cpu_no[0] = card->hw.S514_cpu_no[0]; - wandev->S514_slot_no = card->hw.S514_slot_no; - } - wandev->maddr = (unsigned long)card->hw.dpmbase; - wandev->msize = card->hw.dpmsize; - wandev->hw_opt[0] = card->hw.type; - wandev->hw_opt[1] = card->hw.pclk; - wandev->hw_opt[2] = card->hw.memory; - wandev->hw_opt[3] = card->hw.fwid; - } - - /* Protocol-specific initialization */ - switch (card->hw.fwid) { - - case SFID_X25_502: - case SFID_X25_508: - printk(KERN_INFO "%s: Starting X.25 Protocol Init.\n", - card->devname); - err = wpx_init(card, conf); - break; - case SFID_FR502: - case SFID_FR508: - printk(KERN_INFO "%s: Starting Frame Relay Protocol Init.\n", - card->devname); - err = wpf_init(card, conf); - break; - case SFID_PPP502: - case SFID_PPP508: - printk(KERN_INFO "%s: Starting PPP Protocol Init.\n", - card->devname); - err = wpp_init(card, conf); - break; - - case SFID_CHDLC508: - case SFID_CHDLC514: - if (conf->ft1){ - printk(KERN_INFO "%s: Starting FT1 CSU/DSU Config Driver.\n", - card->devname); - err = wpft1_init(card, conf); - break; - - }else if (conf->config_id == WANCONFIG_MPPP){ - printk(KERN_INFO "%s: Starting Multi-Port PPP Protocol Init.\n", - card->devname); - err = wsppp_init(card,conf); - break; - - }else{ - printk(KERN_INFO "%s: Starting CHDLC Protocol Init.\n", - card->devname); - err = wpc_init(card, conf); - break; - } - default: - printk(KERN_INFO "%s: Error, Firmware is not supported %X %X!\n", - wandev->name,card->hw.fwid,SFID_CHDLC508); - err = -EPROTONOSUPPORT; - } - - if (err != 0){ - if (err == -EPROTONOSUPPORT){ - printk(KERN_INFO - "%s: Error, Protocol selected has not been compiled!\n", - card->devname); - printk(KERN_INFO - "%s: Re-configure the kernel and re-build the modules!\n", - card->devname); - } - - release_hw(card); - wandev->state = WAN_UNCONFIGURED; - return err; - } - - - /* Reserve I/O region and schedule background task */ - if(card->hw.type != SDLA_S514 && !card->wandev.piggyback) - if (!request_region(card->hw.port, card->hw.io_range, - wandev->name)) { - printk(KERN_WARNING "port 0x%04x busy\n", card->hw.port); - release_hw(card); - wandev->state = WAN_UNCONFIGURED; - return -EBUSY; - } - - /* Only use the polling routine for the X25 protocol */ - - card->wandev.critical=0; - return 0; -} - -/*================================================================== - * configure_s508_card - * - * For a S508 adapter, check for a possible configuration error in that - * we are loading an adapter in the same IO port as a previously loaded S508 - * card. - */ - -static int check_s508_conflicts (sdla_t* card,wandev_conf_t* conf, int *irq) -{ - unsigned long smp_flags; - int i; - - if (conf->ioport <= 0) { - printk(KERN_INFO - "%s: can't configure without I/O port address!\n", - card->wandev.name); - return -EINVAL; - } - - if (conf->irq <= 0) { - printk(KERN_INFO "%s: can't configure without IRQ!\n", - card->wandev.name); - return -EINVAL; - } - - if (test_bit(0,&card->configured)) - return 0; - - - /* Check for already loaded card with the same IO port and IRQ - * If found, copy its hardware configuration and use its - * resources (i.e. piggybacking) - */ - - for (i = 0; i < ncards; i++) { - sdla_t *nxt_card = &card_array[i]; - - /* Skip the current card ptr */ - if (nxt_card == card) - continue; - - - /* Find a card that is already configured with the - * same IO Port */ - if ((nxt_card->hw.type == SDLA_S508) && - (nxt_card->hw.port == conf->ioport) && - (nxt_card->next == NULL)){ - - /* We found a card the card that has same configuration - * as us. This means, that we must setup this card in - * piggibacking mode. However, only CHDLC and MPPP protocol - * support this setup */ - - if ((conf->config_id == WANCONFIG_CHDLC || - conf->config_id == WANCONFIG_MPPP) && - (nxt_card->wandev.config_id == WANCONFIG_CHDLC || - nxt_card->wandev.config_id == WANCONFIG_MPPP)){ - - *irq = nxt_card->hw.irq; - memcpy(&card->hw, &nxt_card->hw, sizeof(sdlahw_t)); - - /* The master could already be running, we must - * set this as a critical area */ - lock_adapter_irq(&nxt_card->wandev.lock, &smp_flags); - - nxt_card->next = card; - card->next = nxt_card; - - card->wandev.piggyback = WANOPT_YES; - - /* We must initialise the piggiback spin lock here - * since isr will try to lock card->next if it - * exists */ - spin_lock_init(&card->wandev.lock); - - unlock_adapter_irq(&nxt_card->wandev.lock, &smp_flags); - break; - }else{ - /* Trying to run piggibacking with a wrong protocol */ - printk(KERN_INFO "%s: ERROR: Resource busy, ioport: 0x%x\n" - "%s: This protocol doesn't support\n" - "%s: multi-port operation!\n", - card->devname,nxt_card->hw.port, - card->devname,card->devname); - return -EEXIST; - } - } - } - - - /* Make sure I/O port region is available only if we are the - * master device. If we are running in piggybacking mode, - * we will use the resources of the master card. */ - if (!card->wandev.piggyback) { - struct resource *rr = - request_region(conf->ioport, SDLA_MAXIORANGE, "sdlamain"); - release_region(conf->ioport, SDLA_MAXIORANGE); - - if (!rr) { - printk(KERN_INFO - "%s: I/O region 0x%X - 0x%X is in use!\n", - card->wandev.name, conf->ioport, - conf->ioport + SDLA_MAXIORANGE - 1); - return -EINVAL; - } - } - - return 0; -} - -/*================================================================== - * configure_s514_card - * - * For a S514 adapter, check for a possible configuration error in that - * we are loading an adapter in the same slot as a previously loaded S514 - * card. - */ - - -static int check_s514_conflicts(sdla_t* card,wandev_conf_t* conf, int *irq) -{ - unsigned long smp_flags; - int i; - - if (test_bit(0,&card->configured)) - return 0; - - - /* Check for already loaded card with the same IO port and IRQ - * If found, copy its hardware configuration and use its - * resources (i.e. piggybacking) - */ - - for (i = 0; i < ncards; i ++) { - - sdla_t* nxt_card = &card_array[i]; - if(nxt_card == card) - continue; - - if((nxt_card->hw.type == SDLA_S514) && - (nxt_card->hw.S514_slot_no == conf->PCI_slot_no) && - (nxt_card->hw.S514_cpu_no[0] == conf->S514_CPU_no[0])&& - (nxt_card->next == NULL)){ - - - if ((conf->config_id == WANCONFIG_CHDLC || - conf->config_id == WANCONFIG_MPPP) && - (nxt_card->wandev.config_id == WANCONFIG_CHDLC || - nxt_card->wandev.config_id == WANCONFIG_MPPP)){ - - *irq = nxt_card->hw.irq; - memcpy(&card->hw, &nxt_card->hw, sizeof(sdlahw_t)); - - /* The master could already be running, we must - * set this as a critical area */ - lock_adapter_irq(&nxt_card->wandev.lock,&smp_flags); - nxt_card->next = card; - card->next = nxt_card; - - card->wandev.piggyback = WANOPT_YES; - - /* We must initialise the piggiback spin lock here - * since isr will try to lock card->next if it - * exists */ - spin_lock_init(&card->wandev.lock); - - unlock_adapter_irq(&nxt_card->wandev.lock,&smp_flags); - - }else{ - /* Trying to run piggibacking with a wrong protocol */ - printk(KERN_INFO "%s: ERROR: Resource busy: CPU %c PCISLOT %i\n" - "%s: This protocol doesn't support\n" - "%s: multi-port operation!\n", - card->devname, - conf->S514_CPU_no[0],conf->PCI_slot_no, - card->devname,card->devname); - return -EEXIST; - } - } - } - - return 0; -} - - - -/*============================================================================ - * Shut down WAN link driver. - * o shut down adapter hardware - * o release system resources. - * - * This function is called by the router when device is being unregistered or - * when it handles ROUTER_DOWN IOCTL. - */ -static int shutdown(struct wan_device* wandev) -{ - sdla_t *card; - int err=0; - - /* sanity checks */ - if ((wandev == NULL) || (wandev->private == NULL)){ - return -EFAULT; - } - - if (wandev->state == WAN_UNCONFIGURED){ - return 0; - } - - card = wandev->private; - - if (card->tty_opt){ - if (card->tty_open){ - printk(KERN_INFO - "%s: Shutdown Failed: TTY is still open\n", - card->devname); - return -EBUSY; - } - } - - wandev->state = WAN_UNCONFIGURED; - - set_bit(PERI_CRIT,(void*)&wandev->critical); - - /* In case of piggibacking, make sure that - * we never try to shutdown both devices at the same - * time, because they depend on one another */ - - if (card->disable_comm){ - card->disable_comm(card); - } - - /* Release Resources */ - release_hw(card); - - /* only free the allocated I/O range if not an S514 adapter */ - if (wandev->hw_opt[0] != SDLA_S514 && !card->configured){ - release_region(card->hw.port, card->hw.io_range); - } - - if (!card->configured){ - memset(&card->hw, 0, sizeof(sdlahw_t)); - if (card->next){ - memset(&card->next->hw, 0, sizeof(sdlahw_t)); - } - } - - - clear_bit(PERI_CRIT,(void*)&wandev->critical); - return err; -} - -static void release_hw (sdla_t *card) -{ - sdla_t *nxt_card; - - - /* Check if next device exists */ - if (card->next){ - nxt_card = card->next; - /* If next device is down then release resources */ - if (nxt_card->wandev.state == WAN_UNCONFIGURED){ - if (card->wandev.piggyback){ - /* If this device is piggyback then use - * information of the master device - */ - printk(KERN_INFO "%s: Piggyback shutting down\n",card->devname); - sdla_down(&card->next->hw); - free_irq(card->wandev.irq, card->next); - card->configured = 0; - card->next->configured = 0; - card->wandev.piggyback = 0; - }else{ - /* Master device shutting down */ - printk(KERN_INFO "%s: Master shutting down\n",card->devname); - sdla_down(&card->hw); - free_irq(card->wandev.irq, card); - card->configured = 0; - card->next->configured = 0; - } - }else{ - printk(KERN_INFO "%s: Device still running %i\n", - nxt_card->devname,nxt_card->wandev.state); - - card->configured = 1; - } - }else{ - printk(KERN_INFO "%s: Master shutting down\n",card->devname); - sdla_down(&card->hw); - free_irq(card->wandev.irq, card); - card->configured = 0; - } - return; -} - - -/*============================================================================ - * Driver I/O control. - * o verify arguments - * o perform requested action - * - * This function is called when router handles one of the reserved user - * IOCTLs. Note that 'arg' stil points to user address space. - */ -static int ioctl(struct wan_device* wandev, unsigned cmd, unsigned long arg) -{ - sdla_t* card; - int err; - - /* sanity checks */ - if ((wandev == NULL) || (wandev->private == NULL)) - return -EFAULT; - if (wandev->state == WAN_UNCONFIGURED) - return -ENODEV; - - card = wandev->private; - - if(card->hw.type != SDLA_S514){ - disable_irq(card->hw.irq); - } - - if (test_bit(SEND_CRIT, (void*)&wandev->critical)) { - return -EAGAIN; - } - - switch (cmd) { - case WANPIPE_DUMP: - err = ioctl_dump(wandev->private, (void*)arg); - break; - - case WANPIPE_EXEC: - err = ioctl_exec(wandev->private, (void*)arg, cmd); - break; - default: - err = -EINVAL; - } - - return err; -} - -/****** Driver IOCTL Handlers ***********************************************/ - -/*============================================================================ - * Dump adapter memory to user buffer. - * o verify request structure - * o copy request structure to kernel data space - * o verify length/offset - * o verify user buffer - * o copy adapter memory image to user buffer - * - * Note: when dumping memory, this routine switches curent dual-port memory - * vector, so care must be taken to avoid racing conditions. - */ -static int ioctl_dump (sdla_t* card, sdla_dump_t* u_dump) -{ - sdla_dump_t dump; - unsigned winsize; - unsigned long oldvec; /* DPM window vector */ - unsigned long smp_flags; - int err = 0; - - if(copy_from_user((void*)&dump, (void*)u_dump, sizeof(sdla_dump_t))) - return -EFAULT; - - if ((dump.magic != WANPIPE_MAGIC) || - (dump.offset + dump.length > card->hw.memory)) - return -EINVAL; - - winsize = card->hw.dpmsize; - - if(card->hw.type != SDLA_S514) { - - lock_adapter_irq(&card->wandev.lock, &smp_flags); - - oldvec = card->hw.vector; - while (dump.length) { - /* current offset */ - unsigned pos = dump.offset % winsize; - /* current vector */ - unsigned long vec = dump.offset - pos; - unsigned len = (dump.length > (winsize - pos)) ? - (winsize - pos) : dump.length; - /* relocate window */ - if (sdla_mapmem(&card->hw, vec) != 0) { - err = -EIO; - break; - } - - if(copy_to_user((void *)dump.ptr, - (u8 *)card->hw.dpmbase + pos, len)){ - - unlock_adapter_irq(&card->wandev.lock, &smp_flags); - return -EFAULT; - } - - dump.length -= len; - dump.offset += len; - dump.ptr = (char*)dump.ptr + len; - } - - sdla_mapmem(&card->hw, oldvec);/* restore DPM window position */ - unlock_adapter_irq(&card->wandev.lock, &smp_flags); - - }else { - - if(copy_to_user((void *)dump.ptr, - (u8 *)card->hw.dpmbase + dump.offset, dump.length)){ - return -EFAULT; - } - } - - return err; -} - -/*============================================================================ - * Execute adapter firmware command. - * o verify request structure - * o copy request structure to kernel data space - * o call protocol-specific 'exec' function - */ -static int ioctl_exec (sdla_t* card, sdla_exec_t* u_exec, int cmd) -{ - sdla_exec_t exec; - int err=0; - - if (card->exec == NULL && cmd == WANPIPE_EXEC){ - return -ENODEV; - } - - if(copy_from_user((void*)&exec, (void*)u_exec, sizeof(sdla_exec_t))) - return -EFAULT; - - if ((exec.magic != WANPIPE_MAGIC) || (exec.cmd == NULL)) - return -EINVAL; - - switch (cmd) { - case WANPIPE_EXEC: - err = card->exec(card, exec.cmd, exec.data); - break; - } - return err; -} - -/******* Miscellaneous ******************************************************/ - -/*============================================================================ - * SDLA Interrupt Service Routine. - * o acknowledge SDLA hardware interrupt. - * o call protocol-specific interrupt service routine, if any. - */ -STATIC irqreturn_t sdla_isr (int irq, void* dev_id, struct pt_regs *regs) -{ -#define card ((sdla_t*)dev_id) - - if(card->hw.type == SDLA_S514) { /* handle interrrupt on S514 */ - u32 int_status; - unsigned char CPU_no = card->hw.S514_cpu_no[0]; - unsigned char card_found_for_IRQ; - u8 IRQ_count = 0; - - for(;;) { - - read_S514_int_stat(&card->hw, &int_status); - - /* check if the interrupt is for this device */ - if(!((unsigned char)int_status & - (IRQ_CPU_A | IRQ_CPU_B))) - return IRQ_HANDLED; - - /* if the IRQ is for both CPUs on the same adapter, */ - /* then alter the interrupt status so as to handle */ - /* one CPU at a time */ - if(((unsigned char)int_status & (IRQ_CPU_A | IRQ_CPU_B)) - == (IRQ_CPU_A | IRQ_CPU_B)) { - int_status &= (CPU_no == S514_CPU_A) ? - ~IRQ_CPU_B : ~IRQ_CPU_A; - } - - card_found_for_IRQ = 0; - - /* check to see that the CPU number for this device */ - /* corresponds to the interrupt status read */ - switch (CPU_no) { - case S514_CPU_A: - if((unsigned char)int_status & - IRQ_CPU_A) - card_found_for_IRQ = 1; - break; - - case S514_CPU_B: - if((unsigned char)int_status & - IRQ_CPU_B) - card_found_for_IRQ = 1; - break; - } - - /* exit if the interrupt is for another CPU on the */ - /* same IRQ */ - if(!card_found_for_IRQ) - return IRQ_HANDLED; - - if (!card || - (card->wandev.state == WAN_UNCONFIGURED && !card->configured)){ - printk(KERN_INFO - "Received IRQ %d for CPU #%c\n", - irq, CPU_no); - printk(KERN_INFO - "IRQ for unconfigured adapter\n"); - S514_intack(&card->hw, int_status); - return IRQ_HANDLED; - } - - if (card->in_isr) { - printk(KERN_INFO - "%s: interrupt re-entrancy on IRQ %d\n", - card->devname, card->wandev.irq); - S514_intack(&card->hw, int_status); - return IRQ_HANDLED; - } - - spin_lock(&card->wandev.lock); - if (card->next){ - spin_lock(&card->next->wandev.lock); - } - - S514_intack(&card->hw, int_status); - if (card->isr) - card->isr(card); - - if (card->next){ - spin_unlock(&card->next->wandev.lock); - } - spin_unlock(&card->wandev.lock); - - /* handle a maximum of two interrupts (one for each */ - /* CPU on the adapter) before returning */ - if((++ IRQ_count) == 2) - return IRQ_HANDLED; - } - } - - else { /* handle interrupt on S508 adapter */ - - if (!card || ((card->wandev.state == WAN_UNCONFIGURED) && !card->configured)) - return IRQ_HANDLED; - - if (card->in_isr) { - printk(KERN_INFO - "%s: interrupt re-entrancy on IRQ %d!\n", - card->devname, card->wandev.irq); - return IRQ_HANDLED; - } - - spin_lock(&card->wandev.lock); - if (card->next){ - spin_lock(&card->next->wandev.lock); - } - - sdla_intack(&card->hw); - if (card->isr) - card->isr(card); - - if (card->next){ - spin_unlock(&card->next->wandev.lock); - } - spin_unlock(&card->wandev.lock); - - } - return IRQ_HANDLED; -#undef card -} - -/*============================================================================ - * This routine is called by the protocol-specific modules when network - * interface is being open. The only reason we need this, is because we - * have to call MOD_INC_USE_COUNT, but cannot include 'module.h' where it's - * defined more than once into the same kernel module. - */ -void wanpipe_open (sdla_t* card) -{ - ++card->open_cnt; -} - -/*============================================================================ - * This routine is called by the protocol-specific modules when network - * interface is being closed. The only reason we need this, is because we - * have to call MOD_DEC_USE_COUNT, but cannot include 'module.h' where it's - * defined more than once into the same kernel module. - */ -void wanpipe_close (sdla_t* card) -{ - --card->open_cnt; -} - -/*============================================================================ - * Set WAN device state. - */ -void wanpipe_set_state (sdla_t* card, int state) -{ - if (card->wandev.state != state) { - switch (state) { - case WAN_CONNECTED: - printk (KERN_INFO "%s: link connected!\n", - card->devname); - break; - - case WAN_CONNECTING: - printk (KERN_INFO "%s: link connecting...\n", - card->devname); - break; - - case WAN_DISCONNECTED: - printk (KERN_INFO "%s: link disconnected!\n", - card->devname); - break; - } - card->wandev.state = state; - } - card->state_tick = jiffies; -} - -sdla_t * wanpipe_find_card (char *name) -{ - int cnt; - for (cnt = 0; cnt < ncards; ++ cnt) { - sdla_t* card = &card_array[cnt]; - if (!strcmp(card->devname,name)) - return card; - } - return NULL; -} - -sdla_t * wanpipe_find_card_num (int num) -{ - if (num < 1 || num > ncards) - return NULL; - num--; - return &card_array[num]; -} - -/* - * @work_pointer: work_struct to be done; - * should already have PREPARE_WORK() or - * INIT_WORK() done on it by caller; - */ -void wanpipe_queue_work (struct work_struct *work_pointer) -{ - if (test_and_set_bit(1, (void*)&wanpipe_bh_critical)) - printk(KERN_INFO "CRITICAL IN QUEUING WORK\n"); - - queue_work(wanpipe_wq, work_pointer); - clear_bit(1,(void*)&wanpipe_bh_critical); -} - -void wakeup_sk_bh(struct net_device *dev) -{ - wanpipe_common_t *chan = dev->priv; - - if (test_bit(0,&chan->common_critical)) - return; - - if (chan->sk && chan->tx_timer){ - chan->tx_timer->expires=jiffies+1; - add_timer(chan->tx_timer); - } -} - -int change_dev_flags(struct net_device *dev, unsigned flags) -{ - struct ifreq if_info; - mm_segment_t fs = get_fs(); - int err; - - memset(&if_info, 0, sizeof(if_info)); - strcpy(if_info.ifr_name, dev->name); - if_info.ifr_flags = flags; - - set_fs(get_ds()); /* get user space block */ - err = devinet_ioctl(SIOCSIFFLAGS, &if_info); - set_fs(fs); - - return err; -} - -unsigned long get_ip_address(struct net_device *dev, int option) -{ - - struct in_ifaddr *ifaddr; - struct in_device *in_dev; - unsigned long addr = 0; - - rcu_read_lock(); - if ((in_dev = __in_dev_get_rcu(dev)) == NULL){ - goto out; - } - - if ((ifaddr = in_dev->ifa_list)== NULL ){ - goto out; - } - - switch (option){ - - case WAN_LOCAL_IP: - addr = ifaddr->ifa_local; - break; - - case WAN_POINTOPOINT_IP: - addr = ifaddr->ifa_address; - break; - - case WAN_NETMASK_IP: - addr = ifaddr->ifa_mask; - break; - - case WAN_BROADCAST_IP: - addr = ifaddr->ifa_broadcast; - break; - default: - break; - } - -out: - rcu_read_unlock(); - return addr; -} - -void add_gateway(sdla_t *card, struct net_device *dev) -{ - mm_segment_t oldfs; - struct rtentry route; - int res; - - memset((char*)&route,0,sizeof(struct rtentry)); - - ((struct sockaddr_in *) - &(route.rt_dst))->sin_addr.s_addr = 0; - ((struct sockaddr_in *) - &(route.rt_dst))->sin_family = AF_INET; - - ((struct sockaddr_in *) - &(route.rt_genmask))->sin_addr.s_addr = 0; - ((struct sockaddr_in *) - &(route.rt_genmask)) ->sin_family = AF_INET; - - - route.rt_flags = 0; - route.rt_dev = dev->name; - - oldfs = get_fs(); - set_fs(get_ds()); - res = ip_rt_ioctl(SIOCADDRT,&route); - set_fs(oldfs); - - if (res == 0){ - printk(KERN_INFO "%s: Gateway added for %s\n", - card->devname,dev->name); - } - - return; -} - -MODULE_LICENSE("GPL"); - -/****** End *********************************************************/ |