diff options
Diffstat (limited to 'drivers/net/usb/cdc_ncm.c')
| -rw-r--r-- | drivers/net/usb/cdc_ncm.c | 48 |
1 files changed, 23 insertions, 25 deletions
diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index dbff290ed0e..d350d2795e1 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -68,7 +68,6 @@ static struct usb_driver cdc_ncm_driver; static int cdc_ncm_setup(struct usbnet *dev) { struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0]; - struct usb_cdc_ncm_ntb_parameters ncm_parm; u32 val; u8 flags; u8 iface_no; @@ -82,22 +81,22 @@ static int cdc_ncm_setup(struct usbnet *dev) err = usbnet_read_cmd(dev, USB_CDC_GET_NTB_PARAMETERS, USB_TYPE_CLASS | USB_DIR_IN |USB_RECIP_INTERFACE, - 0, iface_no, &ncm_parm, - sizeof(ncm_parm)); + 0, iface_no, &ctx->ncm_parm, + sizeof(ctx->ncm_parm)); if (err < 0) { dev_err(&dev->intf->dev, "failed GET_NTB_PARAMETERS\n"); return err; /* GET_NTB_PARAMETERS is required */ } /* read correct set of parameters according to device mode */ - ctx->rx_max = le32_to_cpu(ncm_parm.dwNtbInMaxSize); - ctx->tx_max = le32_to_cpu(ncm_parm.dwNtbOutMaxSize); - ctx->tx_remainder = le16_to_cpu(ncm_parm.wNdpOutPayloadRemainder); - ctx->tx_modulus = le16_to_cpu(ncm_parm.wNdpOutDivisor); - ctx->tx_ndp_modulus = le16_to_cpu(ncm_parm.wNdpOutAlignment); + ctx->rx_max = le32_to_cpu(ctx->ncm_parm.dwNtbInMaxSize); + ctx->tx_max = le32_to_cpu(ctx->ncm_parm.dwNtbOutMaxSize); + ctx->tx_remainder = le16_to_cpu(ctx->ncm_parm.wNdpOutPayloadRemainder); + ctx->tx_modulus = le16_to_cpu(ctx->ncm_parm.wNdpOutDivisor); + ctx->tx_ndp_modulus = le16_to_cpu(ctx->ncm_parm.wNdpOutAlignment); /* devices prior to NCM Errata shall set this field to zero */ - ctx->tx_max_datagrams = le16_to_cpu(ncm_parm.wNtbOutMaxDatagrams); - ntb_fmt_supported = le16_to_cpu(ncm_parm.bmNtbFormatsSupported); + ctx->tx_max_datagrams = le16_to_cpu(ctx->ncm_parm.wNtbOutMaxDatagrams); + ntb_fmt_supported = le16_to_cpu(ctx->ncm_parm.bmNtbFormatsSupported); /* there are some minor differences in NCM and MBIM defaults */ if (cdc_ncm_comm_intf_is_mbim(ctx->control->cur_altsetting)) { @@ -146,7 +145,7 @@ static int cdc_ncm_setup(struct usbnet *dev) } /* inform device about NTB input size changes */ - if (ctx->rx_max != le32_to_cpu(ncm_parm.dwNtbInMaxSize)) { + if (ctx->rx_max != le32_to_cpu(ctx->ncm_parm.dwNtbInMaxSize)) { __le32 dwNtbInMaxSize = cpu_to_le32(ctx->rx_max); err = usbnet_write_cmd(dev, USB_CDC_SET_NTB_INPUT_SIZE, @@ -162,14 +161,6 @@ static int cdc_ncm_setup(struct usbnet *dev) dev_dbg(&dev->intf->dev, "Using default maximum transmit length=%d\n", CDC_NCM_NTB_MAX_SIZE_TX); ctx->tx_max = CDC_NCM_NTB_MAX_SIZE_TX; - - /* Adding a pad byte here simplifies the handling in - * cdc_ncm_fill_tx_frame, by making tx_max always - * represent the real skb max size. - */ - if (ctx->tx_max % usb_maxpacket(dev->udev, dev->out, 1) == 0) - ctx->tx_max++; - } /* @@ -439,6 +430,10 @@ advance: goto error2; } + /* initialize data interface */ + if (cdc_ncm_setup(dev)) + goto error2; + /* configure data interface */ temp = usb_set_interface(dev->udev, iface_no, data_altsetting); if (temp) { @@ -453,12 +448,6 @@ advance: goto error2; } - /* initialize data interface */ - if (cdc_ncm_setup(dev)) { - dev_dbg(&intf->dev, "cdc_ncm_setup() failed\n"); - goto error2; - } - usb_set_intfdata(ctx->data, dev); usb_set_intfdata(ctx->control, dev); @@ -475,6 +464,15 @@ advance: dev->hard_mtu = ctx->tx_max; dev->rx_urb_size = ctx->rx_max; + /* cdc_ncm_setup will override dwNtbOutMaxSize if it is + * outside the sane range. Adding a pad byte here if necessary + * simplifies the handling in cdc_ncm_fill_tx_frame, making + * tx_max always represent the real skb max size. + */ + if (ctx->tx_max != le32_to_cpu(ctx->ncm_parm.dwNtbOutMaxSize) && + ctx->tx_max % usb_maxpacket(dev->udev, dev->out, 1) == 0) + ctx->tx_max++; + return 0; error2: |