aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/tulip/tulip_core.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/tulip/tulip_core.c')
-rw-r--r--drivers/net/tulip/tulip_core.c1861
1 files changed, 1861 insertions, 0 deletions
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
new file mode 100644
index 00000000000..d098b3ba353
--- /dev/null
+++ b/drivers/net/tulip/tulip_core.c
@@ -0,0 +1,1861 @@
+/* tulip_core.c: A DEC 21x4x-family ethernet driver for Linux. */
+
+/*
+ Maintained by Jeff Garzik <jgarzik@pobox.com>
+ Copyright 2000,2001 The Linux Kernel Team
+ Written/copyright 1994-2001 by Donald Becker.
+
+ This software may be used and distributed according to the terms
+ of the GNU General Public License, incorporated herein by reference.
+
+ Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
+ for more information on this driver, or visit the project
+ Web page at http://sourceforge.net/projects/tulip/
+
+*/
+
+#include <linux/config.h>
+
+#define DRV_NAME "tulip"
+#ifdef CONFIG_TULIP_NAPI
+#define DRV_VERSION "1.1.13-NAPI" /* Keep at least for test */
+#else
+#define DRV_VERSION "1.1.13"
+#endif
+#define DRV_RELDATE "May 11, 2002"
+
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include "tulip.h"
+#include <linux/init.h>
+#include <linux/etherdevice.h>
+#include <linux/delay.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/crc32.h>
+#include <asm/unaligned.h>
+#include <asm/uaccess.h>
+
+#ifdef __sparc__
+#include <asm/pbm.h>
+#endif
+
+static char version[] __devinitdata =
+ "Linux Tulip driver version " DRV_VERSION " (" DRV_RELDATE ")\n";
+
+
+/* A few user-configurable values. */
+
+/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
+static unsigned int max_interrupt_work = 25;
+
+#define MAX_UNITS 8
+/* Used to pass the full-duplex flag, etc. */
+static int full_duplex[MAX_UNITS];
+static int options[MAX_UNITS];
+static int mtu[MAX_UNITS]; /* Jumbo MTU for interfaces. */
+
+/* The possible media types that can be set in options[] are: */
+const char * const medianame[32] = {
+ "10baseT", "10base2", "AUI", "100baseTx",
+ "10baseT-FDX", "100baseTx-FDX", "100baseT4", "100baseFx",
+ "100baseFx-FDX", "MII 10baseT", "MII 10baseT-FDX", "MII",
+ "10baseT(forced)", "MII 100baseTx", "MII 100baseTx-FDX", "MII 100baseT4",
+ "MII 100baseFx-HDX", "MII 100baseFx-FDX", "Home-PNA 1Mbps", "Invalid-19",
+ "","","","", "","","","", "","","","Transceiver reset",
+};
+
+/* Set the copy breakpoint for the copy-only-tiny-buffer Rx structure. */
+#if defined(__alpha__) || defined(__arm__) || defined(__hppa__) \
+ || defined(__sparc_) || defined(__ia64__) \
+ || defined(__sh__) || defined(__mips__)
+static int rx_copybreak = 1518;
+#else
+static int rx_copybreak = 100;
+#endif
+
+/*
+ Set the bus performance register.
+ Typical: Set 16 longword cache alignment, no burst limit.
+ Cache alignment bits 15:14 Burst length 13:8
+ 0000 No alignment 0x00000000 unlimited 0800 8 longwords
+ 4000 8 longwords 0100 1 longword 1000 16 longwords
+ 8000 16 longwords 0200 2 longwords 2000 32 longwords
+ C000 32 longwords 0400 4 longwords
+ Warning: many older 486 systems are broken and require setting 0x00A04800
+ 8 longword cache alignment, 8 longword burst.
+ ToDo: Non-Intel setting could be better.
+*/
+
+#if defined(__alpha__) || defined(__ia64__)
+static int csr0 = 0x01A00000 | 0xE000;
+#elif defined(__i386__) || defined(__powerpc__) || defined(__x86_64__)
+static int csr0 = 0x01A00000 | 0x8000;
+#elif defined(__sparc__) || defined(__hppa__)
+/* The UltraSparc PCI controllers will disconnect at every 64-byte
+ * crossing anyways so it makes no sense to tell Tulip to burst
+ * any more than that.
+ */
+static int csr0 = 0x01A00000 | 0x9000;
+#elif defined(__arm__) || defined(__sh__)
+static int csr0 = 0x01A00000 | 0x4800;
+#elif defined(__mips__)
+static int csr0 = 0x00200000 | 0x4000;
+#else
+#warning Processor architecture undefined!
+static int csr0 = 0x00A00000 | 0x4800;
+#endif
+
+/* Operational parameters that usually are not changed. */
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT (4*HZ)
+
+
+MODULE_AUTHOR("The Linux Kernel Team");
+MODULE_DESCRIPTION("Digital 21*4* Tulip ethernet driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+module_param(tulip_debug, int, 0);
+module_param(max_interrupt_work, int, 0);
+module_param(rx_copybreak, int, 0);
+module_param(csr0, int, 0);
+module_param_array(options, int, NULL, 0);
+module_param_array(full_duplex, int, NULL, 0);
+
+#define PFX DRV_NAME ": "
+
+#ifdef TULIP_DEBUG
+int tulip_debug = TULIP_DEBUG;
+#else
+int tulip_debug = 1;
+#endif
+
+
+
+/*
+ * This table use during operation for capabilities and media timer.
+ *
+ * It is indexed via the values in 'enum chips'
+ */
+
+struct tulip_chip_table tulip_tbl[] = {
+ { }, /* placeholder for array, slot unused currently */
+ { }, /* placeholder for array, slot unused currently */
+
+ /* DC21140 */
+ { "Digital DS21140 Tulip", 128, 0x0001ebef,
+ HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | HAS_PCI_MWI, tulip_timer },
+
+ /* DC21142, DC21143 */
+ { "Digital DS21143 Tulip", 128, 0x0801fbff,
+ HAS_MII | HAS_MEDIA_TABLE | ALWAYS_CHECK_MII | HAS_ACPI | HAS_NWAY
+ | HAS_INTR_MITIGATION | HAS_PCI_MWI, t21142_timer },
+
+ /* LC82C168 */
+ { "Lite-On 82c168 PNIC", 256, 0x0001fbef,
+ HAS_MII | HAS_PNICNWAY, pnic_timer },
+
+ /* MX98713 */
+ { "Macronix 98713 PMAC", 128, 0x0001ebef,
+ HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM, mxic_timer },
+
+ /* MX98715 */
+ { "Macronix 98715 PMAC", 256, 0x0001ebef,
+ HAS_MEDIA_TABLE, mxic_timer },
+
+ /* MX98725 */
+ { "Macronix 98725 PMAC", 256, 0x0001ebef,
+ HAS_MEDIA_TABLE, mxic_timer },
+
+ /* AX88140 */
+ { "ASIX AX88140", 128, 0x0001fbff,
+ HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | MC_HASH_ONLY
+ | IS_ASIX, tulip_timer },
+
+ /* PNIC2 */
+ { "Lite-On PNIC-II", 256, 0x0801fbff,
+ HAS_MII | HAS_NWAY | HAS_8023X | HAS_PCI_MWI, pnic2_timer },
+
+ /* COMET */
+ { "ADMtek Comet", 256, 0x0001abef,
+ HAS_MII | MC_HASH_ONLY | COMET_MAC_ADDR, comet_timer },
+
+ /* COMPEX9881 */
+ { "Compex 9881 PMAC", 128, 0x0001ebef,
+ HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM, mxic_timer },
+
+ /* I21145 */
+ { "Intel DS21145 Tulip", 128, 0x0801fbff,
+ HAS_MII | HAS_MEDIA_TABLE | ALWAYS_CHECK_MII | HAS_ACPI
+ | HAS_NWAY | HAS_PCI_MWI, t21142_timer },
+
+ /* DM910X */
+ { "Davicom DM9102/DM9102A", 128, 0x0001ebef,
+ HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | HAS_ACPI,
+ tulip_timer },
+
+ /* RS7112 */
+ { "Conexant LANfinity", 256, 0x0001ebef,
+ HAS_MII | HAS_ACPI, tulip_timer },
+
+ /* ULi526X */
+ { "ULi M5261/M5263", 128, 0x0001ebef,
+ HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | HAS_ACPI, tulip_timer },
+};
+
+
+static struct pci_device_id tulip_pci_tbl[] = {
+ { 0x1011, 0x0009, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DC21140 },
+ { 0x1011, 0x0019, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DC21143 },
+ { 0x11AD, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, LC82C168 },
+ { 0x10d9, 0x0512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MX98713 },
+ { 0x10d9, 0x0531, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MX98715 },
+/* { 0x10d9, 0x0531, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MX98725 },*/
+ { 0x125B, 0x1400, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AX88140 },
+ { 0x11AD, 0xc115, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PNIC2 },
+ { 0x1317, 0x0981, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
+ { 0x1317, 0x0985, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
+ { 0x1317, 0x1985, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
+ { 0x1317, 0x9511, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
+ { 0x13D1, 0xAB02, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
+ { 0x13D1, 0xAB03, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
+ { 0x13D1, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
+ { 0x104A, 0x0981, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
+ { 0x104A, 0x2774, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
+ { 0x1259, 0xa120, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
+ { 0x11F6, 0x9881, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMPEX9881 },
+ { 0x8086, 0x0039, PCI_ANY_ID, PCI_ANY_ID, 0, 0, I21145 },
+ { 0x1282, 0x9100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DM910X },
+ { 0x1282, 0x9102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DM910X },
+ { 0x1113, 0x1216, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
+ { 0x1113, 0x1217, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MX98715 },
+ { 0x1113, 0x9511, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
+ { 0x1186, 0x1541, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
+ { 0x1186, 0x1561, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
+ { 0x1186, 0x1591, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
+ { 0x14f1, 0x1803, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CONEXANT },
+ { 0x1626, 0x8410, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
+ { 0x1737, 0xAB09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
+ { 0x1737, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
+ { 0x17B3, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
+ { 0x10b9, 0x5261, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ULI526X }, /* ALi 1563 integrated ethernet */
+ { 0x10b9, 0x5263, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ULI526X }, /* ALi 1563 integrated ethernet */
+ { 0x10b7, 0x9300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* 3Com 3CSOHO100B-TX */
+ { } /* terminate list */
+};
+MODULE_DEVICE_TABLE(pci, tulip_pci_tbl);
+
+
+/* A full-duplex map for media types. */
+const char tulip_media_cap[32] =
+{0,0,0,16, 3,19,16,24, 27,4,7,5, 0,20,23,20, 28,31,0,0, };
+
+static void tulip_tx_timeout(struct net_device *dev);
+static void tulip_init_ring(struct net_device *dev);
+static int tulip_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static int tulip_open(struct net_device *dev);
+static int tulip_close(struct net_device *dev);
+static void tulip_up(struct net_device *dev);
+static void tulip_down(struct net_device *dev);
+static struct net_device_stats *tulip_get_stats(struct net_device *dev);
+static int private_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static void set_rx_mode(struct net_device *dev);
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void poll_tulip(struct net_device *dev);
+#endif
+
+static void tulip_set_power_state (struct tulip_private *tp,
+ int sleep, int snooze)
+{
+ if (tp->flags & HAS_ACPI) {
+ u32 tmp, newtmp;
+ pci_read_config_dword (tp->pdev, CFDD, &tmp);
+ newtmp = tmp & ~(CFDD_Sleep | CFDD_Snooze);
+ if (sleep)
+ newtmp |= CFDD_Sleep;
+ else if (snooze)
+ newtmp |= CFDD_Snooze;
+ if (tmp != newtmp)
+ pci_write_config_dword (tp->pdev, CFDD, newtmp);
+ }
+
+}
+
+
+static void tulip_up(struct net_device *dev)
+{
+ struct tulip_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->base_addr;
+ int next_tick = 3*HZ;
+ int i;
+
+ /* Wake the chip from sleep/snooze mode. */
+ tulip_set_power_state (tp, 0, 0);
+
+ /* On some chip revs we must set the MII/SYM port before the reset!? */
+ if (tp->mii_cnt || (tp->mtable && tp->mtable->has_mii))
+ iowrite32(0x00040000, ioaddr + CSR6);
+
+ /* Reset the chip, holding bit 0 set at least 50 PCI cycles. */
+ iowrite32(0x00000001, ioaddr + CSR0);
+ udelay(100);
+
+ /* Deassert reset.
+ Wait the specified 50 PCI cycles after a reset by initializing
+ Tx and Rx queues and the address filter list. */
+ iowrite32(tp->csr0, ioaddr + CSR0);
+ udelay(100);
+
+ if (tulip_debug > 1)
+ printk(KERN_DEBUG "%s: tulip_up(), irq==%d.\n", dev->name, dev->irq);
+
+ iowrite32(tp->rx_ring_dma, ioaddr + CSR3);
+ iowrite32(tp->tx_ring_dma, ioaddr + CSR4);
+ tp->cur_rx = tp->cur_tx = 0;
+ tp->dirty_rx = tp->dirty_tx = 0;
+
+ if (tp->flags & MC_HASH_ONLY) {
+ u32 addr_low = le32_to_cpu(get_unaligned((u32 *)dev->dev_addr));
+ u32 addr_high = le16_to_cpu(get_unaligned((u16 *)(dev->dev_addr+4)));
+ if (tp->chip_id == AX88140) {
+ iowrite32(0, ioaddr + CSR13);
+ iowrite32(addr_low, ioaddr + CSR14);
+ iowrite32(1, ioaddr + CSR13);
+ iowrite32(addr_high, ioaddr + CSR14);
+ } else if (tp->flags & COMET_MAC_ADDR) {
+ iowrite32(addr_low, ioaddr + 0xA4);
+ iowrite32(addr_high, ioaddr + 0xA8);
+ iowrite32(0, ioaddr + 0xAC);
+ iowrite32(0, ioaddr + 0xB0);
+ }
+ } else {
+ /* This is set_rx_mode(), but without starting the transmitter. */
+ u16 *eaddrs = (u16 *)dev->dev_addr;
+ u16 *setup_frm = &tp->setup_frame[15*6];
+ dma_addr_t mapping;
+
+ /* 21140 bug: you must add the broadcast address. */
+ memset(tp->setup_frame, 0xff, sizeof(tp->setup_frame));
+ /* Fill the final entry of the table with our physical address. */
+ *setup_frm++ = eaddrs[0]; *setup_frm++ = eaddrs[0];
+ *setup_frm++ = eaddrs[1]; *setup_frm++ = eaddrs[1];
+ *setup_frm++ = eaddrs[2]; *setup_frm++ = eaddrs[2];
+
+ mapping = pci_map_single(tp->pdev, tp->setup_frame,
+ sizeof(tp->setup_frame),
+ PCI_DMA_TODEVICE);
+ tp->tx_buffers[tp->cur_tx].skb = NULL;
+ tp->tx_buffers[tp->cur_tx].mapping = mapping;
+
+ /* Put the setup frame on the Tx list. */
+ tp->tx_ring[tp->cur_tx].length = cpu_to_le32(0x08000000 | 192);
+ tp->tx_ring[tp->cur_tx].buffer1 = cpu_to_le32(mapping);
+ tp->tx_ring[tp->cur_tx].status = cpu_to_le32(DescOwned);
+
+ tp->cur_tx++;
+ }
+
+ tp->saved_if_port = dev->if_port;
+ if (dev->if_port == 0)
+ dev->if_port = tp->default_port;
+
+ /* Allow selecting a default media. */
+ i = 0;
+ if (tp->mtable == NULL)
+ goto media_picked;
+ if (dev->if_port) {
+ int looking_for = tulip_media_cap[dev->if_port] & MediaIsMII ? 11 :
+ (dev->if_port == 12 ? 0 : dev->if_port);
+ for (i = 0; i < tp->mtable->leafcount; i++)
+ if (tp->mtable->mleaf[i].media == looking_for) {
+ printk(KERN_INFO "%s: Using user-specified media %s.\n",
+ dev->name, medianame[dev->if_port]);
+ goto media_picked;
+ }
+ }
+ if ((tp->mtable->defaultmedia & 0x0800) == 0) {
+ int looking_for = tp->mtable->defaultmedia & MEDIA_MASK;
+ for (i = 0; i < tp->mtable->leafcount; i++)
+ if (tp->mtable->mleaf[i].media == looking_for) {
+ printk(KERN_INFO "%s: Using EEPROM-set media %s.\n",
+ dev->name, medianame[looking_for]);
+ goto media_picked;
+ }
+ }
+ /* Start sensing first non-full-duplex media. */
+ for (i = tp->mtable->leafcount - 1;
+ (tulip_media_cap[tp->mtable->mleaf[i].media] & MediaAlwaysFD) && i > 0; i--)
+ ;
+media_picked:
+
+ tp->csr6 = 0;
+ tp->cur_index = i;
+ tp->nwayset = 0;
+
+ if (dev->if_port) {
+ if (tp->chip_id == DC21143 &&
+ (tulip_media_cap[dev->if_port] & MediaIsMII)) {
+ /* We must reset the media CSRs when we force-select MII mode. */
+ iowrite32(0x0000, ioaddr + CSR13);
+ iowrite32(0x0000, ioaddr + CSR14);
+ iowrite32(0x0008, ioaddr + CSR15);
+ }
+ tulip_select_media(dev, 1);
+ } else if (tp->chip_id == DC21142) {
+ if (tp->mii_cnt) {
+ tulip_select_media(dev, 1);
+ if (tulip_debug > 1)
+ printk(KERN_INFO "%s: Using MII transceiver %d, status "
+ "%4.4x.\n",
+ dev->name, tp->phys[0], tulip_mdio_read(dev, tp->phys[0], 1));
+ iowrite32(csr6_mask_defstate, ioaddr + CSR6);
+ tp->csr6 = csr6_mask_hdcap;
+ dev->if_port = 11;
+ iowrite32(0x0000, ioaddr + CSR13);
+ iowrite32(0x0000, ioaddr + CSR14);
+ } else
+ t21142_start_nway(dev);
+ } else if (tp->chip_id == PNIC2) {
+ /* for initial startup advertise 10/100 Full and Half */
+ tp->sym_advertise = 0x01E0;
+ /* enable autonegotiate end interrupt */
+ iowrite32(ioread32(ioaddr+CSR5)| 0x00008010, ioaddr + CSR5);
+ iowrite32(ioread32(ioaddr+CSR7)| 0x00008010, ioaddr + CSR7);
+ pnic2_start_nway(dev);
+ } else if (tp->chip_id == LC82C168 && ! tp->medialock) {
+ if (tp->mii_cnt) {
+ dev->if_port = 11;
+ tp->csr6 = 0x814C0000 | (tp->full_duplex ? 0x0200 : 0);
+ iowrite32(0x0001, ioaddr + CSR15);
+ } else if (ioread32(ioaddr + CSR5) & TPLnkPass)
+ pnic_do_nway(dev);
+ else {
+ /* Start with 10mbps to do autonegotiation. */
+ iowrite32(0x32, ioaddr + CSR12);
+ tp->csr6 = 0x00420000;
+ iowrite32(0x0001B078, ioaddr + 0xB8);
+ iowrite32(0x0201B078, ioaddr + 0xB8);
+ next_tick = 1*HZ;
+ }
+ } else if ((tp->chip_id == MX98713 || tp->chip_id == COMPEX9881)
+ && ! tp->medialock) {
+ dev->if_port = 0;
+ tp->csr6 = 0x01880000 | (tp->full_duplex ? 0x0200 : 0);
+ iowrite32(0x0f370000 | ioread16(ioaddr + 0x80), ioaddr + 0x80);
+ } else if (tp->chip_id == MX98715 || tp->chip_id == MX98725) {
+ /* Provided by BOLO, Macronix - 12/10/1998. */
+ dev->if_port = 0;
+ tp->csr6 = 0x01a80200;
+ iowrite32(0x0f370000 | ioread16(ioaddr + 0x80), ioaddr + 0x80);
+ iowrite32(0x11000 | ioread16(ioaddr + 0xa0), ioaddr + 0xa0);
+ } else if (tp->chip_id == COMET || tp->chip_id == CONEXANT) {
+ /* Enable automatic Tx underrun recovery. */
+ iowrite32(ioread32(ioaddr + 0x88) | 1, ioaddr + 0x88);
+ dev->if_port = tp->mii_cnt ? 11 : 0;
+ tp->csr6 = 0x00040000;
+ } else if (tp->chip_id == AX88140) {
+ tp->csr6 = tp->mii_cnt ? 0x00040100 : 0x00000100;
+ } else
+ tulip_select_media(dev, 1);
+
+ /* Start the chip's Tx to process setup frame. */
+ tulip_stop_rxtx(tp);
+ barrier();
+ udelay(5);
+ iowrite32(tp->csr6 | TxOn, ioaddr + CSR6);
+
+ /* Enable interrupts by setting the interrupt mask. */
+ iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR5);
+ iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR7);
+ tulip_start_rxtx(tp);
+ iowrite32(0, ioaddr + CSR2); /* Rx poll demand */
+
+ if (tulip_debug > 2) {
+ printk(KERN_DEBUG "%s: Done tulip_up(), CSR0 %8.8x, CSR5 %8.8x CSR6 %8.8x.\n",
+ dev->name, ioread32(ioaddr + CSR0), ioread32(ioaddr + CSR5),
+ ioread32(ioaddr + CSR6));
+ }
+
+ /* Set the timer to switch to check for link beat and perhaps switch
+ to an alternate media type. */
+ tp->timer.expires = RUN_AT(next_tick);
+ add_timer(&tp->timer);
+#ifdef CONFIG_TULIP_NAPI
+ init_timer(&tp->oom_timer);
+ tp->oom_timer.data = (unsigned long)dev;
+ tp->oom_timer.function = oom_timer;
+#endif
+}
+
+static int
+tulip_open(struct net_device *dev)
+{
+ int retval;
+
+ if ((retval = request_irq(dev->irq, &tulip_interrupt, SA_SHIRQ, dev->name, dev)))
+ return retval;
+
+ tulip_init_ring (dev);
+
+ tulip_up (dev);
+
+ netif_start_queue (dev);
+
+ return 0;
+}
+
+
+static void tulip_tx_timeout(struct net_device *dev)
+{
+ struct tulip_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->base_addr;
+ unsigned long flags;
+
+ spin_lock_irqsave (&tp->lock, flags);
+
+ if (tulip_media_cap[dev->if_port] & MediaIsMII) {
+ /* Do nothing -- the media monitor should handle this. */
+ if (tulip_debug > 1)
+ printk(KERN_WARNING "%s: Transmit timeout using MII device.\n",
+ dev->name);
+ } else if (tp->chip_id == DC21140 || tp->chip_id == DC21142
+ || tp->chip_id == MX98713 || tp->chip_id == COMPEX9881
+ || tp->chip_id == DM910X || tp->chip_id == ULI526X) {
+ printk(KERN_WARNING "%s: 21140 transmit timed out, status %8.8x, "
+ "SIA %8.8x %8.8x %8.8x %8.8x, resetting...\n",
+ dev->name, ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12),
+ ioread32(ioaddr + CSR13), ioread32(ioaddr + CSR14), ioread32(ioaddr + CSR15));
+ if ( ! tp->medialock && tp->mtable) {
+ do
+ --tp->cur_index;
+ while (tp->cur_index >= 0
+ && (tulip_media_cap[tp->mtable->mleaf[tp->cur_index].media]
+ & MediaIsFD));
+ if (--tp->cur_index < 0) {
+ /* We start again, but should instead look for default. */
+ tp->cur_index = tp->mtable->leafcount - 1;
+ }
+ tulip_select_media(dev, 0);
+ printk(KERN_WARNING "%s: transmit timed out, switching to %s "
+ "media.\n", dev->name, medianame[dev->if_port]);
+ }
+ } else if (tp->chip_id == PNIC2) {
+ printk(KERN_WARNING "%s: PNIC2 transmit timed out, status %8.8x, "
+ "CSR6/7 %8.8x / %8.8x CSR12 %8.8x, resetting...\n",
+ dev->name, (int)ioread32(ioaddr + CSR5), (int)ioread32(ioaddr + CSR6),
+ (int)ioread32(ioaddr + CSR7), (int)ioread32(ioaddr + CSR12));
+ } else {
+ printk(KERN_WARNING "%s: Transmit timed out, status %8.8x, CSR12 "
+ "%8.8x, resetting...\n",
+ dev->name, ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12));
+ dev->if_port = 0;
+ }
+
+#if defined(way_too_many_messages)
+ if (tulip_debug > 3) {
+ int i;
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ u8 *buf = (u8 *)(tp->rx_ring[i].buffer1);
+ int j;
+ printk(KERN_DEBUG "%2d: %8.8x %8.8x %8.8x %8.8x "
+ "%2.2x %2.2x %2.2x.\n",
+ i, (unsigned int)tp->rx_ring[i].status,
+ (unsigned int)tp->rx_ring[i].length,
+ (unsigned int)tp->rx_ring[i].buffer1,
+ (unsigned int)tp->rx_ring[i].buffer2,
+ buf[0], buf[1], buf[2]);
+ for (j = 0; buf[j] != 0xee && j < 1600; j++)
+ if (j < 100) printk(" %2.2x", buf[j]);
+ printk(" j=%d.\n", j);
+ }
+ printk(KERN_DEBUG " Rx ring %8.8x: ", (int)tp->rx_ring);
+ for (i = 0; i < RX_RING_SIZE; i++)
+ printk(" %8.8x", (unsigned int)tp->rx_ring[i].status);
+ printk("\n" KERN_DEBUG " Tx ring %8.8x: ", (int)tp->tx_ring);
+ for (i = 0; i < TX_RING_SIZE; i++)
+ printk(" %8.8x", (unsigned int)tp->tx_ring[i].status);
+ printk("\n");
+ }
+#endif
+
+ /* Stop and restart the chip's Tx processes . */
+
+ tulip_restart_rxtx(tp);
+ /* Trigger an immediate transmit demand. */
+ iowrite32(0, ioaddr + CSR1);
+
+ tp->stats.tx_errors++;
+
+ spin_unlock_irqrestore (&tp->lock, flags);
+ dev->trans_start = jiffies;
+ netif_wake_queue (dev);
+}
+
+
+/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
+static void tulip_init_ring(struct net_device *dev)
+{
+ struct tulip_private *tp = netdev_priv(dev);
+ int i;
+
+ tp->susp_rx = 0;
+ tp->ttimer = 0;
+ tp->nir = 0;
+
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ tp->rx_ring[i].status = 0x00000000;
+ tp->rx_ring[i].length = cpu_to_le32(PKT_BUF_SZ);
+ tp->rx_ring[i].buffer2 = cpu_to_le32(tp->rx_ring_dma + sizeof(struct tulip_rx_desc) * (i + 1));
+ tp->rx_buffers[i].skb = NULL;
+ tp->rx_buffers[i].mapping = 0;
+ }
+ /* Mark the last entry as wrapping the ring. */
+ tp->rx_ring[i-1].length = cpu_to_le32(PKT_BUF_SZ | DESC_RING_WRAP);
+ tp->rx_ring[i-1].buffer2 = cpu_to_le32(tp->rx_ring_dma);
+
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ dma_addr_t mapping;
+
+ /* Note the receive buffer must be longword aligned.
+ dev_alloc_skb() provides 16 byte alignment. But do *not*
+ use skb_reserve() to align the IP header! */
+ struct sk_buff *skb = dev_alloc_skb(PKT_BUF_SZ);
+ tp->rx_buffers[i].skb = skb;
+ if (skb == NULL)
+ break;
+ mapping = pci_map_single(tp->pdev, skb->tail,
+ PKT_BUF_SZ, PCI_DMA_FROMDEVICE);
+ tp->rx_buffers[i].mapping = mapping;
+ skb->dev = dev; /* Mark as being used by this device. */
+ tp->rx_ring[i].status = cpu_to_le32(DescOwned); /* Owned by Tulip chip */
+ tp->rx_ring[i].buffer1 = cpu_to_le32(mapping);
+ }
+ tp->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
+
+ /* The Tx buffer descriptor is filled in as needed, but we
+ do need to clear the ownership bit. */
+ for (i = 0; i < TX_RING_SIZE; i++) {
+ tp->tx_buffers[i].skb = NULL;
+ tp->tx_buffers[i].mapping = 0;
+ tp->tx_ring[i].status = 0x00000000;
+ tp->tx_ring[i].buffer2 = cpu_to_le32(tp->tx_ring_dma + sizeof(struct tulip_tx_desc) * (i + 1));
+ }
+ tp->tx_ring[i-1].buffer2 = cpu_to_le32(tp->tx_ring_dma);
+}
+
+static int
+tulip_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct tulip_private *tp = netdev_priv(dev);
+ int entry;
+ u32 flag;
+ dma_addr_t mapping;
+
+ spin_lock_irq(&tp->lock);
+
+ /* Calculate the next Tx descriptor entry. */
+ entry = tp->cur_tx % TX_RING_SIZE;
+
+ tp->tx_buffers[entry].skb = skb;
+ mapping = pci_map_single(tp->pdev, skb->data,
+ skb->len, PCI_DMA_TODEVICE);
+ tp->tx_buffers[entry].mapping = mapping;
+ tp->tx_ring[entry].buffer1 = cpu_to_le32(mapping);
+
+ if (tp->cur_tx - tp->dirty_tx < TX_RING_SIZE/2) {/* Typical path */
+ flag = 0x60000000; /* No interrupt */
+ } else if (tp->cur_tx - tp->dirty_tx == TX_RING_SIZE/2) {
+ flag = 0xe0000000; /* Tx-done intr. */
+ } else if (tp->cur_tx - tp->dirty_tx < TX_RING_SIZE - 2) {
+ flag = 0x60000000; /* No Tx-done intr. */
+ } else { /* Leave room for set_rx_mode() to fill entries. */
+ flag = 0xe0000000; /* Tx-done intr. */
+ netif_stop_queue(dev);
+ }
+ if (entry == TX_RING_SIZE-1)
+ flag = 0xe0000000 | DESC_RING_WRAP;
+
+ tp->tx_ring[entry].length = cpu_to_le32(skb->len | flag);
+ /* if we were using Transmit Automatic Polling, we would need a
+ * wmb() here. */
+ tp->tx_ring[entry].status = cpu_to_le32(DescOwned);
+ wmb();
+
+ tp->cur_tx++;
+
+ /* Trigger an immediate transmit demand. */
+ iowrite32(0, tp->base_addr + CSR1);
+
+ spin_unlock_irq(&tp->lock);
+
+ dev->trans_start = jiffies;
+
+ return 0;
+}
+
+static void tulip_clean_tx_ring(struct tulip_private *tp)
+{
+ unsigned int dirty_tx;
+
+ for (dirty_tx = tp->dirty_tx ; tp->cur_tx - dirty_tx > 0;
+ dirty_tx++) {
+ int entry = dirty_tx % TX_RING_SIZE;
+ int status = le32_to_cpu(tp->tx_ring[entry].status);
+
+ if (status < 0) {
+ tp->stats.tx_errors++; /* It wasn't Txed */
+ tp->tx_ring[entry].status = 0;
+ }
+
+ /* Check for Tx filter setup frames. */
+ if (tp->tx_buffers[entry].skb == NULL) {
+ /* test because dummy frames not mapped */
+ if (tp->tx_buffers[entry].mapping)
+ pci_unmap_single(tp->pdev,
+ tp->tx_buffers[entry].mapping,
+ sizeof(tp->setup_frame),
+ PCI_DMA_TODEVICE);
+ continue;
+ }
+
+ pci_unmap_single(tp->pdev, tp->tx_buffers[entry].mapping,
+ tp->tx_buffers[entry].skb->len,
+ PCI_DMA_TODEVICE);
+
+ /* Free the original skb. */
+ dev_kfree_skb_irq(tp->tx_buffers[entry].skb);
+ tp->tx_buffers[entry].skb = NULL;
+ tp->tx_buffers[entry].mapping = 0;
+ }
+}
+
+static void tulip_down (struct net_device *dev)
+{
+ struct tulip_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->base_addr;
+ unsigned long flags;
+
+ del_timer_sync (&tp->timer);
+#ifdef CONFIG_TULIP_NAPI
+ del_timer_sync (&tp->oom_timer);
+#endif
+ spin_lock_irqsave (&tp->lock, flags);
+
+ /* Disable interrupts by clearing the interrupt mask. */
+ iowrite32 (0x00000000, ioaddr + CSR7);
+
+ /* Stop the Tx and Rx processes. */
+ tulip_stop_rxtx(tp);
+
+ /* prepare receive buffers */
+ tulip_refill_rx(dev);
+
+ /* release any unconsumed transmit buffers */
+ tulip_clean_tx_ring(tp);
+
+ if (ioread32 (ioaddr + CSR6) != 0xffffffff)
+ tp->stats.rx_missed_errors += ioread32 (ioaddr + CSR8) & 0xffff;
+
+ spin_unlock_irqrestore (&tp->lock, flags);
+
+ init_timer(&tp->timer);
+ tp->timer.data = (unsigned long)dev;
+ tp->timer.function = tulip_tbl[tp->chip_id].media_timer;
+
+ dev->if_port = tp->saved_if_port;
+
+ /* Leave the driver in snooze, not sleep, mode. */
+ tulip_set_power_state (tp, 0, 1);
+}
+
+
+static int tulip_close (struct net_device *dev)
+{
+ struct tulip_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->base_addr;
+ int i;
+
+ netif_stop_queue (dev);
+
+ tulip_down (dev);
+
+ if (tulip_debug > 1)
+ printk (KERN_DEBUG "%s: Shutting down ethercard, status was %2.2x.\n",
+ dev->name, ioread32 (ioaddr + CSR5));
+
+ free_irq (dev->irq, dev);
+
+ /* Free all the skbuffs in the Rx queue. */
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ struct sk_buff *skb = tp->rx_buffers[i].skb;
+ dma_addr_t mapping = tp->rx_buffers[i].mapping;
+
+ tp->rx_buffers[i].skb = NULL;
+ tp->rx_buffers[i].mapping = 0;
+
+ tp->rx_ring[i].status = 0; /* Not owned by Tulip chip. */
+ tp->rx_ring[i].length = 0;
+ tp->rx_ring[i].buffer1 = 0xBADF00D0; /* An invalid address. */
+ if (skb) {
+ pci_unmap_single(tp->pdev, mapping, PKT_BUF_SZ,
+ PCI_DMA_FROMDEVICE);
+ dev_kfree_skb (skb);
+ }
+ }
+ for (i = 0; i < TX_RING_SIZE; i++) {
+ struct sk_buff *skb = tp->tx_buffers[i].skb;
+
+ if (skb != NULL) {
+ pci_unmap_single(tp->pdev, tp->tx_buffers[i].mapping,
+ skb->len, PCI_DMA_TODEVICE);
+ dev_kfree_skb (skb);
+ }
+ tp->tx_buffers[i].skb = NULL;
+ tp->tx_buffers[i].mapping = 0;
+ }
+
+ return 0;
+}
+
+static struct net_device_stats *tulip_get_stats(struct net_device *dev)
+{
+ struct tulip_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->base_addr;
+
+ if (netif_running(dev)) {
+ unsigned long flags;
+
+ spin_lock_irqsave (&tp->lock, flags);
+
+ tp->stats.rx_missed_errors += ioread32(ioaddr + CSR8) & 0xffff;
+
+ spin_unlock_irqrestore(&tp->lock, flags);
+ }
+
+ return &tp->stats;
+}
+
+
+static void tulip_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ struct tulip_private *np = netdev_priv(dev);
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ strcpy(info->bus_info, pci_name(np->pdev));
+}
+
+static struct ethtool_ops ops = {
+ .get_drvinfo = tulip_get_drvinfo
+};
+
+/* Provide ioctl() calls to examine the MII xcvr state. */
+static int private_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct tulip_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->base_addr;
+ struct mii_ioctl_data *data = if_mii(rq);
+ const unsigned int phy_idx = 0;
+ int phy = tp->phys[phy_idx] & 0x1f;
+ unsigned int regnum = data->reg_num;
+
+ switch (cmd) {
+ case SIOCGMIIPHY: /* Get address of MII PHY in use. */
+ if (tp->mii_cnt)
+ data->phy_id = phy;
+ else if (tp->flags & HAS_NWAY)
+ data->phy_id = 32;
+ else if (tp->chip_id == COMET)
+ data->phy_id = 1;
+ else
+ return -ENODEV;
+
+ case SIOCGMIIREG: /* Read MII PHY register. */
+ if (data->phy_id == 32 && (tp->flags & HAS_NWAY)) {
+ int csr12 = ioread32 (ioaddr + CSR12);
+ int csr14 = ioread32 (ioaddr + CSR14);
+ switch (regnum) {
+ case 0:
+ if (((csr14<<5) & 0x1000) ||
+ (dev->if_port == 5 && tp->nwayset))
+ data->val_out = 0x1000;
+ else
+ data->val_out = (tulip_media_cap[dev->if_port]&MediaIs100 ? 0x2000 : 0)
+ | (tulip_media_cap[dev->if_port]&MediaIsFD ? 0x0100 : 0);
+ break;
+ case 1:
+ data->val_out =
+ 0x1848 +
+ ((csr12&0x7000) == 0x5000 ? 0x20 : 0) +
+ ((csr12&0x06) == 6 ? 0 : 4);
+ data->val_out |= 0x6048;
+ break;
+ case 4:
+ /* Advertised value, bogus 10baseTx-FD value from CSR6. */
+ data->val_out =
+ ((ioread32(ioaddr + CSR6) >> 3) & 0x0040) +
+ ((csr14 >> 1) & 0x20) + 1;
+ data->val_out |= ((csr14 >> 9) & 0x03C0);
+ break;
+ case 5: data->val_out = tp->lpar; break;
+ default: data->val_out = 0; break;
+ }
+ } else {
+ data->val_out = tulip_mdio_read (dev, data->phy_id & 0x1f, regnum);
+ }
+ return 0;
+
+ case SIOCSMIIREG: /* Write MII PHY register. */
+ if (!capable (CAP_NET_ADMIN))
+ return -EPERM;
+ if (regnum & ~0x1f)
+ return -EINVAL;
+ if (data->phy_id == phy) {
+ u16 value = data->val_in;
+ switch (regnum) {
+ case 0: /* Check for autonegotiation on or reset. */
+ tp->full_duplex_lock = (value & 0x9000) ? 0 : 1;
+ if (tp->full_duplex_lock)
+ tp->full_duplex = (value & 0x0100) ? 1 : 0;
+ break;
+ case 4:
+ tp->advertising[phy_idx] =
+ tp->mii_advertise = data->val_in;
+ break;
+ }
+ }
+ if (data->phy_id == 32 && (tp->flags & HAS_NWAY)) {
+ u16 value = data->val_in;
+ if (regnum == 0) {
+ if ((value & 0x1200) == 0x1200) {
+ if (tp->chip_id == PNIC2) {
+ pnic2_start_nway (dev);
+ } else {
+ t21142_start_nway (dev);
+ }
+ }
+ } else if (regnum == 4)
+ tp->sym_advertise = value;
+ } else {
+ tulip_mdio_write (dev, data->phy_id & 0x1f, regnum, data->val_in);
+ }
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ return -EOPNOTSUPP;
+}
+
+
+/* Set or clear the multicast filter for this adaptor.
+ Note that we only use exclusion around actually queueing the
+ new frame, not around filling tp->setup_frame. This is non-deterministic
+ when re-entered but still correct. */
+
+#undef set_bit_le
+#define set_bit_le(i,p) do { ((char *)(p))[(i)/8] |= (1<<((i)%8)); } while(0)
+
+static void build_setup_frame_hash(u16 *setup_frm, struct net_device *dev)
+{
+ struct tulip_private *tp = netdev_priv(dev);
+ u16 hash_table[32];
+ struct dev_mc_list *mclist;
+ int i;
+ u16 *eaddrs;
+
+ memset(hash_table, 0, sizeof(hash_table));
+ set_bit_le(255, hash_table); /* Broadcast entry */
+ /* This should work on big-endian machines as well. */
+ for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+ i++, mclist = mclist->next) {
+ int index = ether_crc_le(ETH_ALEN, mclist->dmi_addr) & 0x1ff;
+
+ set_bit_le(index, hash_table);
+
+ }
+ for (i = 0; i < 32; i++) {
+ *setup_frm++ = hash_table[i];
+ *setup_frm++ = hash_table[i];
+ }
+ setup_frm = &tp->setup_frame[13*6];
+
+ /* Fill the final entry with our physical address. */
+ eaddrs = (u16 *)dev->dev_addr;
+ *setup_frm++ = eaddrs[0]; *setup_frm++ = eaddrs[0];
+ *setup_frm++ = eaddrs[1]; *setup_frm++ = eaddrs[1];
+ *setup_frm++ = eaddrs[2]; *setup_frm++ = eaddrs[2];
+}
+
+static void build_setup_frame_perfect(u16 *setup_frm, struct net_device *dev)
+{
+ struct tulip_private *tp = netdev_priv(dev);
+ struct dev_mc_list *mclist;
+ int i;
+ u16 *eaddrs;
+
+ /* We have <= 14 addresses so we can use the wonderful
+ 16 address perfect filtering of the Tulip. */
+ for (i = 0, mclist = dev->mc_list; i < dev->mc_count;
+ i++, mclist = mclist->next) {
+ eaddrs = (u16 *)mclist->dmi_addr;
+ *setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++;
+ *setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++;
+ *setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++;
+ }
+ /* Fill the unused entries with the broadcast address. */
+ memset(setup_frm, 0xff, (15-i)*12);
+ setup_frm = &tp->setup_frame[15*6];
+
+ /* Fill the final entry with our physical address. */
+ eaddrs = (u16 *)dev->dev_addr;
+ *setup_frm++ = eaddrs[0]; *setup_frm++ = eaddrs[0];
+ *setup_frm++ = eaddrs[1]; *setup_frm++ = eaddrs[1];
+ *setup_frm++ = eaddrs[2]; *setup_frm++ = eaddrs[2];
+}
+
+
+static void set_rx_mode(struct net_device *dev)
+{
+ struct tulip_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->base_addr;
+ int csr6;
+
+ csr6 = ioread32(ioaddr + CSR6) & ~0x00D5;
+
+ tp->csr6 &= ~0x00D5;
+ if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
+ tp->csr6 |= AcceptAllMulticast | AcceptAllPhys;
+ csr6 |= AcceptAllMulticast | AcceptAllPhys;
+ /* Unconditionally log net taps. */
+ printk(KERN_INFO "%s: Promiscuous mode enabled.\n", dev->name);
+ } else if ((dev->mc_count > 1000) || (dev->flags & IFF_ALLMULTI)) {
+ /* Too many to filter well -- accept all multicasts. */
+ tp->csr6 |= AcceptAllMulticast;
+ csr6 |= AcceptAllMulticast;
+ } else if (tp->flags & MC_HASH_ONLY) {
+ /* Some work-alikes have only a 64-entry hash filter table. */
+ /* Should verify correctness on big-endian/__powerpc__ */
+ struct dev_mc_list *mclist;
+ int i;
+ if (dev->mc_count > 64) { /* Arbitrary non-effective limit. */
+ tp->csr6 |= AcceptAllMulticast;
+ csr6 |= AcceptAllMulticast;
+ } else {
+ u32 mc_filter[2] = {0, 0}; /* Multicast hash filter */
+ int filterbit;
+ for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+ i++, mclist = mclist->next) {
+ if (tp->flags & COMET_MAC_ADDR)
+ filterbit = ether_crc_le(ETH_ALEN, mclist->dmi_addr);
+ else
+ filterbit = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
+ filterbit &= 0x3f;
+ mc_filter[filterbit >> 5] |= 1 << (filterbit & 31);
+ if (tulip_debug > 2) {
+ printk(KERN_INFO "%s: Added filter for %2.2x:%2.2x:%2.2x:"
+ "%2.2x:%2.2x:%2.2x %8.8x bit %d.\n", dev->name,
+ mclist->dmi_addr[0], mclist->dmi_addr[1],
+ mclist->dmi_addr[2], mclist->dmi_addr[3],
+ mclist->dmi_addr[4], mclist->dmi_addr[5],
+ ether_crc(ETH_ALEN, mclist->dmi_addr), filterbit);
+ }
+ }
+ if (mc_filter[0] == tp->mc_filter[0] &&
+ mc_filter[1] == tp->mc_filter[1])
+ ; /* No change. */
+ else if (tp->flags & IS_ASIX) {
+ iowrite32(2, ioaddr + CSR13);
+ iowrite32(mc_filter[0], ioaddr + CSR14);
+ iowrite32(3, ioaddr + CSR13);
+ iowrite32(mc_filter[1], ioaddr + CSR14);
+ } else if (tp->flags & COMET_MAC_ADDR) {
+ iowrite32(mc_filter[0], ioaddr + 0xAC);
+ iowrite32(mc_filter[1], ioaddr + 0xB0);
+ }
+ tp->mc_filter[0] = mc_filter[0];
+ tp->mc_filter[1] = mc_filter[1];
+ }
+ } else {
+ unsigned long flags;
+ u32 tx_flags = 0x08000000 | 192;
+
+ /* Note that only the low-address shortword of setup_frame is valid!
+ The values are doubled for big-endian architectures. */
+ if (dev->mc_count > 14) { /* Must use a multicast hash table. */
+ build_setup_frame_hash(tp->setup_frame, dev);
+ tx_flags = 0x08400000 | 192;
+ } else {
+ build_setup_frame_perfect(tp->setup_frame, dev);
+ }
+
+ spin_lock_irqsave(&tp->lock, flags);
+
+ if (tp->cur_tx - tp->dirty_tx > TX_RING_SIZE - 2) {
+ /* Same setup recently queued, we need not add it. */
+ } else {
+ unsigned int entry;
+ int dummy = -1;
+
+ /* Now add this frame to the Tx list. */
+
+ entry = tp->cur_tx++ % TX_RING_SIZE;
+
+ if (entry != 0) {
+ /* Avoid a chip errata by prefixing a dummy entry. Don't do
+ this on the ULI526X as it triggers a different problem */
+ if (!(tp->chip_id == ULI526X && (tp->revision = 0x40 || tp->revision == 0x50))) {
+ tp->tx_buffers[entry].skb = NULL;
+ tp->tx_buffers[entry].mapping = 0;
+ tp->tx_ring[entry].length =
+ (entry == TX_RING_SIZE-1) ? cpu_to_le32(DESC_RING_WRAP) : 0;
+ tp->tx_ring[entry].buffer1 = 0;
+ /* Must set DescOwned later to avoid race with chip */
+ dummy = entry;
+ entry = tp->cur_tx++ % TX_RING_SIZE;
+ }
+ }
+
+ tp->tx_buffers[entry].skb = NULL;
+ tp->tx_buffers[entry].mapping =
+ pci_map_single(tp->pdev, tp->setup_frame,
+ sizeof(tp->setup_frame),
+ PCI_DMA_TODEVICE);
+ /* Put the setup frame on the Tx list. */
+ if (entry == TX_RING_SIZE-1)
+ tx_flags |= DESC_RING_WRAP; /* Wrap ring. */
+ tp->tx_ring[entry].length = cpu_to_le32(tx_flags);
+ tp->tx_ring[entry].buffer1 =
+ cpu_to_le32(tp->tx_buffers[entry].mapping);
+ tp->tx_ring[entry].status = cpu_to_le32(DescOwned);
+ if (dummy >= 0)
+ tp->tx_ring[dummy].status = cpu_to_le32(DescOwned);
+ if (tp->cur_tx - tp->dirty_tx >= TX_RING_SIZE - 2)
+ netif_stop_queue(dev);
+
+ /* Trigger an immediate transmit demand. */
+ iowrite32(0, ioaddr + CSR1);
+ }
+
+ spin_unlock_irqrestore(&tp->lock, flags);
+ }
+
+ iowrite32(csr6, ioaddr + CSR6);
+}
+
+#ifdef CONFIG_TULIP_MWI
+static void __devinit tulip_mwi_config (struct pci_dev *pdev,
+ struct net_device *dev)
+{
+ struct tulip_private *tp = netdev_priv(dev);
+ u8 cache;
+ u16 pci_command;
+ u32 csr0;
+
+ if (tulip_debug > 3)
+ printk(KERN_DEBUG "%s: tulip_mwi_config()\n", pci_name(pdev));
+
+ tp->csr0 = csr0 = 0;
+
+ /* if we have any cache line size at all, we can do MRM */
+ csr0 |= MRM;
+
+ /* ...and barring hardware bugs, MWI */
+ if (!(tp->chip_id == DC21143 && tp->revision == 65))
+ csr0 |= MWI;
+
+ /* set or disable MWI in the standard PCI command bit.
+ * Check for the case where mwi is desired but not available
+ */
+ if (csr0 & MWI) pci_set_mwi(pdev);
+ else pci_clear_mwi(pdev);
+
+ /* read result from hardware (in case bit refused to enable) */
+ pci_read_config_word(pdev, PCI_COMMAND, &pci_command);
+ if ((csr0 & MWI) && (!(pci_command & PCI_COMMAND_INVALIDATE)))
+ csr0 &= ~MWI;
+
+ /* if cache line size hardwired to zero, no MWI */
+ pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cache);
+ if ((csr0 & MWI) && (cache == 0)) {
+ csr0 &= ~MWI;
+ pci_clear_mwi(pdev);
+ }
+
+ /* assign per-cacheline-size cache alignment and
+ * burst length values
+ */
+ switch (cache) {
+ case 8:
+ csr0 |= MRL | (1 << CALShift) | (16 << BurstLenShift);
+ break;
+ case 16:
+ csr0 |= MRL | (2 << CALShift) | (16 << BurstLenShift);
+ break;
+ case 32:
+ csr0 |= MRL | (3 << CALShift) | (32 << BurstLenShift);
+ break;
+ default:
+ cache = 0;
+ break;
+ }
+
+ /* if we have a good cache line size, we by now have a good
+ * csr0, so save it and exit
+ */
+ if (cache)
+ goto out;
+
+ /* we don't have a good csr0 or cache line size, disable MWI */
+ if (csr0 & MWI) {
+ pci_clear_mwi(pdev);
+ csr0 &= ~MWI;
+ }
+
+ /* sane defaults for burst length and cache alignment
+ * originally from de4x5 driver
+ */
+ csr0 |= (8 << BurstLenShift) | (1 << CALShift);
+
+out:
+ tp->csr0 = csr0;
+ if (tulip_debug > 2)
+ printk(KERN_DEBUG "%s: MWI config cacheline=%d, csr0=%08x\n",
+ pci_name(pdev), cache, csr0);
+}
+#endif
+
+/*
+ * Chips that have the MRM/reserved bit quirk and the burst quirk. That
+ * is the DM910X and the on chip ULi devices
+ */
+
+static int tulip_uli_dm_quirk(struct pci_dev *pdev)
+{
+ if (pdev->vendor == 0x1282 && pdev->device == 0x9102)
+ return 1;
+ if (pdev->vendor == 0x10b9 && pdev->device == 0x5261)
+ return 1;
+ if (pdev->vendor == 0x10b9 && pdev->device == 0x5263)
+ return 1;
+ return 0;
+}
+
+static int __devinit tulip_init_one (struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct tulip_private *tp;
+ /* See note below on the multiport cards. */
+ static unsigned char last_phys_addr[6] = {0x00, 'L', 'i', 'n', 'u', 'x'};
+ static struct pci_device_id early_486_chipsets[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82424) },
+ { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496) },
+ { },
+ };
+ static int last_irq;
+ static int multiport_cnt; /* For four-port boards w/one EEPROM */
+ u8 chip_rev;
+ int i, irq;
+ unsigned short sum;
+ unsigned char *ee_data;
+ struct net_device *dev;
+ void __iomem *ioaddr;
+ static int board_idx = -1;
+ int chip_idx = ent->driver_data;
+ const char *chip_name = tulip_tbl[chip_idx].chip_name;
+ unsigned int eeprom_missing = 0;
+ unsigned int force_csr0 = 0;
+
+#ifndef MODULE
+ static int did_version; /* Already printed version info. */
+ if (tulip_debug > 0 && did_version++ == 0)
+ printk (KERN_INFO "%s", version);
+#endif
+
+ board_idx++;
+
+ /*
+ * Lan media wire a tulip chip to a wan interface. Needs a very
+ * different driver (lmc driver)
+ */
+
+ if (pdev->subsystem_vendor == PCI_VENDOR_ID_LMC) {
+ printk (KERN_ERR PFX "skipping LMC card.\n");
+ return -ENODEV;
+ }
+
+ /*
+ * Early DM9100's need software CRC and the DMFE driver
+ */
+
+ if (pdev->vendor == 0x1282 && pdev->device == 0x9100)
+ {
+ u32 dev_rev;
+ /* Read Chip revision */
+ pci_read_config_dword(pdev, PCI_REVISION_ID, &dev_rev);
+ if(dev_rev < 0x02000030)
+ {
+ printk(KERN_ERR PFX "skipping early DM9100 with Crc bug (use dmfe)\n");
+ return -ENODEV;
+ }
+ }
+
+ /*
+ * Looks for early PCI chipsets where people report hangs
+ * without the workarounds being on.
+ */
+
+ /* 1. Intel Saturn. Switch to 8 long words burst, 8 long word cache
+ aligned. Aries might need this too. The Saturn errata are not
+ pretty reading but thankfully it's an old 486 chipset.
+
+ 2. The dreaded SiS496 486 chipset. Same workaround as Intel
+ Saturn.
+ */
+
+ if (pci_dev_present(early_486_chipsets)) {
+ csr0 = MRL | MRM | (8 << BurstLenShift) | (1 << CALShift);
+ force_csr0 = 1;
+ }
+
+ /* bugfix: the ASIX must have a burst limit or horrible things happen. */
+ if (chip_idx == AX88140) {
+ if ((csr0 & 0x3f00) == 0)
+ csr0 |= 0x2000;
+ }
+
+ /* PNIC doesn't have MWI/MRL/MRM... */
+ if (chip_idx == LC82C168)
+ csr0 &= ~0xfff10000; /* zero reserved bits 31:20, 16 */
+
+ /* DM9102A has troubles with MRM & clear reserved bits 24:22, 20, 16, 7:1 */
+ if (tulip_uli_dm_quirk(pdev)) {
+ csr0 &= ~0x01f100ff;
+#if defined(__sparc__)
+ csr0 = (csr0 & ~0xff00) | 0xe000;
+#endif
+ }
+ /*
+ * And back to business
+ */
+
+ i = pci_enable_device(pdev);
+ if (i) {
+ printk (KERN_ERR PFX
+ "Cannot enable tulip board #%d, aborting\n",
+ board_idx);
+ return i;
+ }
+
+ irq = pdev->irq;
+
+ /* alloc_etherdev ensures aligned and zeroed private structures */
+ dev = alloc_etherdev (sizeof (*tp));
+ if (!dev) {
+ printk (KERN_ERR PFX "ether device alloc failed, aborting\n");
+ return -ENOMEM;
+ }
+
+ SET_MODULE_OWNER(dev);
+ SET_NETDEV_DEV(dev, &pdev->dev);
+ if (pci_resource_len (pdev, 0) < tulip_tbl[chip_idx].io_size) {
+ printk (KERN_ERR PFX "%s: I/O region (0x%lx@0x%lx) too small, "
+ "aborting\n", pci_name(pdev),
+ pci_resource_len (pdev, 0),
+ pci_resource_start (pdev, 0));
+ goto err_out_free_netdev;
+ }
+
+ /* grab all resources from both PIO and MMIO regions, as we
+ * don't want anyone else messing around with our hardware */
+ if (pci_request_regions (pdev, "tulip"))
+ goto err_out_free_netdev;
+
+#ifndef USE_IO_OPS
+ ioaddr = pci_iomap(pdev, 1, tulip_tbl[chip_idx].io_size);
+#else
+ ioaddr = pci_iomap(pdev, 0, tulip_tbl[chip_idx].io_size);
+#endif
+ if (!ioaddr)
+ goto err_out_free_res;
+
+ pci_read_config_byte (pdev, PCI_REVISION_ID, &chip_rev);
+
+ /*
+ * initialize private data structure 'tp'
+ * it is zeroed and aligned in alloc_etherdev
+ */
+ tp = netdev_priv(dev);
+
+ tp->rx_ring = pci_alloc_consistent(pdev,
+ sizeof(struct tulip_rx_desc) * RX_RING_SIZE +
+ sizeof(struct tulip_tx_desc) * TX_RING_SIZE,
+ &tp->rx_ring_dma);
+ if (!tp->rx_ring)
+ goto err_out_mtable;
+ tp->tx_ring = (struct tulip_tx_desc *)(tp->rx_ring + RX_RING_SIZE);
+ tp->tx_ring_dma = tp->rx_ring_dma + sizeof(struct tulip_rx_desc) * RX_RING_SIZE;
+
+ tp->chip_id = chip_idx;
+ tp->flags = tulip_tbl[chip_idx].flags;
+ tp->pdev = pdev;
+ tp->base_addr = ioaddr;
+ tp->revision = chip_rev;
+ tp->csr0 = csr0;
+ spin_lock_init(&tp->lock);
+ spin_lock_init(&tp->mii_lock);
+ init_timer(&tp->timer);
+ tp->timer.data = (unsigned long)dev;
+ tp->timer.function = tulip_tbl[tp->chip_id].media_timer;
+
+ dev->base_addr = (unsigned long)ioaddr;
+
+#ifdef CONFIG_TULIP_MWI
+ if (!force_csr0 && (tp->flags & HAS_PCI_MWI))
+ tulip_mwi_config (pdev, dev);
+#else
+ /* MWI is broken for DC21143 rev 65... */
+ if (chip_idx == DC21143 && chip_rev == 65)
+ tp->csr0 &= ~MWI;
+#endif
+
+ /* Stop the chip's Tx and Rx processes. */
+ tulip_stop_rxtx(tp);
+
+ pci_set_master(pdev);
+
+#ifdef CONFIG_GSC
+ if (pdev->subsystem_vendor == PCI_VENDOR_ID_HP) {
+ switch (pdev->subsystem_device) {
+ default:
+ break;
+ case 0x1061:
+ case 0x1062:
+ case 0x1063:
+ case 0x1098:
+ case 0x1099:
+ case 0x10EE:
+ tp->flags |= HAS_SWAPPED_SEEPROM | NEEDS_FAKE_MEDIA_TABLE;
+ chip_name = "GSC DS21140 Tulip";
+ }
+ }
+#endif
+
+ /* Clear the missed-packet counter. */
+ ioread32(ioaddr + CSR8);
+
+ /* The station address ROM is read byte serially. The register must
+ be polled, waiting for the value to be read bit serially from the
+ EEPROM.
+ */
+ ee_data = tp->eeprom;
+ sum = 0;
+ if (chip_idx == LC82C168) {
+ for (i = 0; i < 3; i++) {
+ int value, boguscnt = 100000;
+ iowrite32(0x600 | i, ioaddr + 0x98);
+ do
+ value = ioread32(ioaddr + CSR9);
+ while (value < 0 && --boguscnt > 0);
+ put_unaligned(le16_to_cpu(value), ((u16*)dev->dev_addr) + i);
+ sum += value & 0xffff;
+ }
+ } else if (chip_idx == COMET) {
+ /* No need to read the EEPROM. */
+ put_unaligned(cpu_to_le32(ioread32(ioaddr + 0xA4)), (u32 *)dev->dev_addr);
+ put_unaligned(cpu_to_le16(ioread32(ioaddr + 0xA8)), (u16 *)(dev->dev_addr + 4));
+ for (i = 0; i < 6; i ++)
+ sum += dev->dev_addr[i];
+ } else {
+ /* A serial EEPROM interface, we read now and sort it out later. */
+ int sa_offset = 0;
+ int ee_addr_size = tulip_read_eeprom(dev, 0xff, 8) & 0x40000 ? 8 : 6;
+
+ for (i = 0; i < sizeof(tp->eeprom); i+=2) {
+ u16 data = tulip_read_eeprom(dev, i/2, ee_addr_size);
+ ee_data[i] = data & 0xff;
+ ee_data[i + 1] = data >> 8;
+ }
+
+ /* DEC now has a specification (see Notes) but early board makers
+ just put the address in the first EEPROM locations. */
+ /* This does memcmp(ee_data, ee_data+16, 8) */
+ for (i = 0; i < 8; i ++)
+ if (ee_data[i] != ee_data[16+i])
+ sa_offset = 20;
+ if (chip_idx == CONEXANT) {
+ /* Check that the tuple type and length is correct. */
+ if (ee_data[0x198] == 0x04 && ee_data[0x199] == 6)
+ sa_offset = 0x19A;
+ } else if (ee_data[0] == 0xff && ee_data[1] == 0xff &&
+ ee_data[2] == 0) {
+ sa_offset = 2; /* Grrr, damn Matrox boards. */
+ multiport_cnt = 4;
+ }
+#ifdef CONFIG_DDB5476
+ if ((pdev->bus->number == 0) && (PCI_SLOT(pdev->devfn) == 6)) {
+ /* DDB5476 MAC address in first EEPROM locations. */
+ sa_offset = 0;
+ /* No media table either */
+ tp->flags &= ~HAS_MEDIA_TABLE;
+ }
+#endif
+#ifdef CONFIG_DDB5477
+ if ((pdev->bus->number == 0) && (PCI_SLOT(pdev->devfn) == 4)) {
+ /* DDB5477 MAC address in first EEPROM locations. */
+ sa_offset = 0;
+ /* No media table either */
+ tp->flags &= ~HAS_MEDIA_TABLE;
+ }
+#endif
+#ifdef CONFIG_MIPS_COBALT
+ if ((pdev->bus->number == 0) &&
+ ((PCI_SLOT(pdev->devfn) == 7) ||
+ (PCI_SLOT(pdev->devfn) == 12))) {
+ /* Cobalt MAC address in first EEPROM locations. */
+ sa_offset = 0;
+ /* No media table either */
+ tp->flags &= ~HAS_MEDIA_TABLE;
+ }
+#endif
+#ifdef CONFIG_GSC
+ /* Check to see if we have a broken srom */
+ if (ee_data[0] == 0x61 && ee_data[1] == 0x10) {
+ /* pci_vendor_id and subsystem_id are swapped */
+ ee_data[0] = ee_data[2];
+ ee_data[1] = ee_data[3];
+ ee_data[2] = 0x61;
+ ee_data[3] = 0x10;
+
+ /* HSC-PCI boards need to be byte-swaped and shifted
+ * up 1 word. This shift needs to happen at the end
+ * of the MAC first because of the 2 byte overlap.
+ */
+ for (i = 4; i >= 0; i -= 2) {
+ ee_data[17 + i + 3] = ee_data[17 + i];
+ ee_data[16 + i + 5] = ee_data[16 + i];
+ }
+ }
+#endif
+
+ for (i = 0; i < 6; i ++) {
+ dev->dev_addr[i] = ee_data[i + sa_offset];
+ sum += ee_data[i + sa_offset];
+ }
+ }
+ /* Lite-On boards have the address byte-swapped. */
+ if ((dev->dev_addr[0] == 0xA0 || dev->dev_addr[0] == 0xC0 || dev->dev_addr[0] == 0x02)
+ && dev->dev_addr[1] == 0x00)
+ for (i = 0; i < 6; i+=2) {
+ char tmp = dev->dev_addr[i];
+ dev->dev_addr[i] = dev->dev_addr[i+1];
+ dev->dev_addr[i+1] = tmp;
+ }
+ /* On the Zynx 315 Etherarray and other multiport boards only the
+ first Tulip has an EEPROM.
+ On Sparc systems the mac address is held in the OBP property
+ "local-mac-address".
+ The addresses of the subsequent ports are derived from the first.
+ Many PCI BIOSes also incorrectly report the IRQ line, so we correct
+ that here as well. */
+ if (sum == 0 || sum == 6*0xff) {
+#if defined(__sparc__)
+ struct pcidev_cookie *pcp = pdev->sysdata;
+#endif
+ eeprom_missing = 1;
+ for (i = 0; i < 5; i++)
+ dev->dev_addr[i] = last_phys_addr[i];
+ dev->dev_addr[i] = last_phys_addr[i] + 1;
+#if defined(__sparc__)
+ if ((pcp != NULL) && prom_getproplen(pcp->prom_node,
+ "local-mac-address") == 6) {
+ prom_getproperty(pcp->prom_node, "local-mac-address",
+ dev->dev_addr, 6);
+ }
+#endif
+#if defined(__i386__) /* Patch up x86 BIOS bug. */
+ if (last_irq)
+ irq = last_irq;
+#endif
+ }
+
+ for (i = 0; i < 6; i++)
+ last_phys_addr[i] = dev->dev_addr[i];
+ last_irq = irq;
+ dev->irq = irq;
+
+ /* The lower four bits are the media type. */
+ if (board_idx >= 0 && board_idx < MAX_UNITS) {
+ if (options[board_idx] & MEDIA_MASK)
+ tp->default_port = options[board_idx] & MEDIA_MASK;
+ if ((options[board_idx] & FullDuplex) || full_duplex[board_idx] > 0)
+ tp->full_duplex = 1;
+ if (mtu[board_idx] > 0)
+ dev->mtu = mtu[board_idx];
+ }
+ if (dev->mem_start & MEDIA_MASK)
+ tp->default_port = dev->mem_start & MEDIA_MASK;
+ if (tp->default_port) {
+ printk(KERN_INFO "tulip%d: Transceiver selection forced to %s.\n",
+ board_idx, medianame[tp->default_port & MEDIA_MASK]);
+ tp->medialock = 1;
+ if (tulip_media_cap[tp->default_port] & MediaAlwaysFD)
+ tp->full_duplex = 1;
+ }
+ if (tp->full_duplex)
+ tp->full_duplex_lock = 1;
+
+ if (tulip_media_cap[tp->default_port] & MediaIsMII) {
+ u16 media2advert[] = { 0x20, 0x40, 0x03e0, 0x60, 0x80, 0x100, 0x200 };
+ tp->mii_advertise = media2advert[tp->default_port - 9];
+ tp->mii_advertise |= (tp->flags & HAS_8023X); /* Matching bits! */
+ }
+
+ if (tp->flags & HAS_MEDIA_TABLE) {
+ sprintf(dev->name, "tulip%d", board_idx); /* hack */
+ tulip_parse_eeprom(dev);
+ strcpy(dev->name, "eth%d"); /* un-hack */
+ }
+
+ if ((tp->flags & ALWAYS_CHECK_MII) ||
+ (tp->mtable && tp->mtable->has_mii) ||
+ ( ! tp->mtable && (tp->flags & HAS_MII))) {
+ if (tp->mtable && tp->mtable->has_mii) {
+ for (i = 0; i < tp->mtable->leafcount; i++)
+ if (tp->mtable->mleaf[i].media == 11) {
+ tp->cur_index = i;
+ tp->saved_if_port = dev->if_port;
+ tulip_select_media(dev, 2);
+ dev->if_port = tp->saved_if_port;
+ break;
+ }
+ }
+
+ /* Find the connected MII xcvrs.
+ Doing this in open() would allow detecting external xcvrs
+ later, but takes much time. */
+ tulip_find_mii (dev, board_idx);
+ }
+
+ /* The Tulip-specific entries in the device structure. */
+ dev->open = tulip_open;
+ dev->hard_start_xmit = tulip_start_xmit;
+ dev->tx_timeout = tulip_tx_timeout;
+ dev->watchdog_timeo = TX_TIMEOUT;
+#ifdef CONFIG_TULIP_NAPI
+ dev->poll = tulip_poll;
+ dev->weight = 16;
+#endif
+ dev->stop = tulip_close;
+ dev->get_stats = tulip_get_stats;
+ dev->do_ioctl = private_ioctl;
+ dev->set_multicast_list = set_rx_mode;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = &poll_tulip;
+#endif
+ SET_ETHTOOL_OPS(dev, &ops);
+
+ if (register_netdev(dev))
+ goto err_out_free_ring;
+
+ printk(KERN_INFO "%s: %s rev %d at %p,",
+ dev->name, chip_name, chip_rev, ioaddr);
+ pci_set_drvdata(pdev, dev);
+
+ if (eeprom_missing)
+ printk(" EEPROM not present,");
+ for (i = 0; i < 6; i++)
+ printk("%c%2.2X", i ? ':' : ' ', dev->dev_addr[i]);
+ printk(", IRQ %d.\n", irq);
+
+ if (tp->chip_id == PNIC2)
+ tp->link_change = pnic2_lnk_change;
+ else if (tp->flags & HAS_NWAY)
+ tp->link_change = t21142_lnk_change;
+ else if (tp->flags & HAS_PNICNWAY)
+ tp->link_change = pnic_lnk_change;
+
+ /* Reset the xcvr interface and turn on heartbeat. */
+ switch (chip_idx) {
+ case DC21140:
+ case DM910X:
+ case ULI526X:
+ default:
+ if (tp->mtable)
+ iowrite32(tp->mtable->csr12dir | 0x100, ioaddr + CSR12);
+ break;
+ case DC21142:
+ if (tp->mii_cnt || tulip_media_cap[dev->if_port] & MediaIsMII) {
+ iowrite32(csr6_mask_defstate, ioaddr + CSR6);
+ iowrite32(0x0000, ioaddr + CSR13);
+ iowrite32(0x0000, ioaddr + CSR14);
+ iowrite32(csr6_mask_hdcap, ioaddr + CSR6);
+ } else
+ t21142_start_nway(dev);
+ break;
+ case PNIC2:
+ /* just do a reset for sanity sake */
+ iowrite32(0x0000, ioaddr + CSR13);
+ iowrite32(0x0000, ioaddr + CSR14);
+ break;
+ case LC82C168:
+ if ( ! tp->mii_cnt) {
+ tp->nway = 1;
+ tp->nwayset = 0;
+ iowrite32(csr6_ttm | csr6_ca, ioaddr + CSR6);
+ iowrite32(0x30, ioaddr + CSR12);
+ iowrite32(0x0001F078, ioaddr + CSR6);
+ iowrite32(0x0201F078, ioaddr + CSR6); /* Turn on autonegotiation. */
+ }
+ break;
+ case MX98713:
+ case COMPEX9881:
+ iowrite32(0x00000000, ioaddr + CSR6);
+ iowrite32(0x000711C0, ioaddr + CSR14); /* Turn on NWay. */
+ iowrite32(0x00000001, ioaddr + CSR13);
+ break;
+ case MX98715:
+ case MX98725:
+ iowrite32(0x01a80000, ioaddr + CSR6);
+ iowrite32(0xFFFFFFFF, ioaddr + CSR14);
+ iowrite32(0x00001000, ioaddr + CSR12);
+ break;
+ case COMET:
+ /* No initialization necessary. */
+ break;
+ }
+
+ /* put the chip in snooze mode until opened */
+ tulip_set_power_state (tp, 0, 1);
+
+ return 0;
+
+err_out_free_ring:
+ pci_free_consistent (pdev,
+ sizeof (struct tulip_rx_desc) * RX_RING_SIZE +
+ sizeof (struct tulip_tx_desc) * TX_RING_SIZE,
+ tp->rx_ring, tp->rx_ring_dma);
+
+err_out_mtable:
+ if (tp->mtable)
+ kfree (tp->mtable);
+ pci_iounmap(pdev, ioaddr);
+
+err_out_free_res:
+ pci_release_regions (pdev);
+
+err_out_free_netdev:
+ free_netdev (dev);
+ return -ENODEV;
+}
+
+
+#ifdef CONFIG_PM
+
+static int tulip_suspend (struct pci_dev *pdev, pm_message_t state)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+
+ if (dev && netif_running (dev) && netif_device_present (dev)) {
+ netif_device_detach (dev);
+ tulip_down (dev);
+ /* pci_power_off(pdev, -1); */
+ }
+ return 0;
+}
+
+
+static int tulip_resume(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+
+ if (dev && netif_running (dev) && !netif_device_present (dev)) {
+#if 1
+ pci_enable_device (pdev);
+#endif
+ /* pci_power_on(pdev); */
+ tulip_up (dev);
+ netif_device_attach (dev);
+ }
+ return 0;
+}
+
+#endif /* CONFIG_PM */
+
+
+static void __devexit tulip_remove_one (struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata (pdev);
+ struct tulip_private *tp;
+
+ if (!dev)
+ return;
+
+ tp = netdev_priv(dev);
+ unregister_netdev(dev);
+ pci_free_consistent (pdev,
+ sizeof (struct tulip_rx_desc) * RX_RING_SIZE +
+ sizeof (struct tulip_tx_desc) * TX_RING_SIZE,
+ tp->rx_ring, tp->rx_ring_dma);
+ if (tp->mtable)
+ kfree (tp->mtable);
+ pci_iounmap(pdev, tp->base_addr);
+ free_netdev (dev);
+ pci_release_regions (pdev);
+ pci_set_drvdata (pdev, NULL);
+
+ /* pci_power_off (pdev, -1); */
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+
+static void poll_tulip (struct net_device *dev)
+{
+ /* disable_irq here is not very nice, but with the lockless
+ interrupt handler we have no other choice. */
+ disable_irq(dev->irq);
+ tulip_interrupt (dev->irq, dev, NULL);
+ enable_irq(dev->irq);
+}
+#endif
+
+static struct pci_driver tulip_driver = {
+ .name = DRV_NAME,
+ .id_table = tulip_pci_tbl,
+ .probe = tulip_init_one,
+ .remove = __devexit_p(tulip_remove_one),
+#ifdef CONFIG_PM
+ .suspend = tulip_suspend,
+ .resume = tulip_resume,
+#endif /* CONFIG_PM */
+};
+
+
+static int __init tulip_init (void)
+{
+#ifdef MODULE
+ printk (KERN_INFO "%s", version);
+#endif
+
+ /* copy module parms into globals */
+ tulip_rx_copybreak = rx_copybreak;
+ tulip_max_interrupt_work = max_interrupt_work;
+
+ /* probe for and init boards */
+ return pci_module_init (&tulip_driver);
+}
+
+
+static void __exit tulip_cleanup (void)
+{
+ pci_unregister_driver (&tulip_driver);
+}
+
+
+module_init(tulip_init);
+module_exit(tulip_cleanup);