diff options
Diffstat (limited to 'drivers/net/spider_net.c')
| -rw-r--r-- | drivers/net/spider_net.c | 247 |
1 files changed, 123 insertions, 124 deletions
diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c index 8aa3ebe2a0e..fef455694d7 100644 --- a/drivers/net/spider_net.c +++ b/drivers/net/spider_net.c @@ -1705,6 +1705,124 @@ spider_net_enable_card(struct spider_net_card *card) } /** + * spider_net_download_firmware - loads firmware into the adapter + * @card: card structure + * @firmware_ptr: pointer to firmware data + * + * spider_net_download_firmware loads the firmware data into the + * adapter. It assumes the length etc. to be allright. + */ +static int +spider_net_download_firmware(struct spider_net_card *card, + const void *firmware_ptr) +{ + int sequencer, i; + const u32 *fw_ptr = firmware_ptr; + + /* stop sequencers */ + spider_net_write_reg(card, SPIDER_NET_GSINIT, + SPIDER_NET_STOP_SEQ_VALUE); + + for (sequencer = 0; sequencer < SPIDER_NET_FIRMWARE_SEQS; + sequencer++) { + spider_net_write_reg(card, + SPIDER_NET_GSnPRGADR + sequencer * 8, 0); + for (i = 0; i < SPIDER_NET_FIRMWARE_SEQWORDS; i++) { + spider_net_write_reg(card, SPIDER_NET_GSnPRGDAT + + sequencer * 8, *fw_ptr); + fw_ptr++; + } + } + + if (spider_net_read_reg(card, SPIDER_NET_GSINIT)) + return -EIO; + + spider_net_write_reg(card, SPIDER_NET_GSINIT, + SPIDER_NET_RUN_SEQ_VALUE); + + return 0; +} + +/** + * spider_net_init_firmware - reads in firmware parts + * @card: card structure + * + * Returns 0 on success, <0 on failure + * + * spider_net_init_firmware opens the sequencer firmware and does some basic + * checks. This function opens and releases the firmware structure. A call + * to download the firmware is performed before the release. + * + * Firmware format + * =============== + * spider_fw.bin is expected to be a file containing 6*1024*4 bytes, 4k being + * the program for each sequencer. Use the command + * tail -q -n +2 Seq_code1_0x088.txt Seq_code2_0x090.txt \ + * Seq_code3_0x098.txt Seq_code4_0x0A0.txt Seq_code5_0x0A8.txt \ + * Seq_code6_0x0B0.txt | xxd -r -p -c4 > spider_fw.bin + * + * to generate spider_fw.bin, if you have sequencer programs with something + * like the following contents for each sequencer: + * <ONE LINE COMMENT> + * <FIRST 4-BYTES-WORD FOR SEQUENCER> + * <SECOND 4-BYTES-WORD FOR SEQUENCER> + * ... + * <1024th 4-BYTES-WORD FOR SEQUENCER> + */ +static int +spider_net_init_firmware(struct spider_net_card *card) +{ + struct firmware *firmware = NULL; + struct device_node *dn; + const u8 *fw_prop = NULL; + int err = -ENOENT; + int fw_size; + + if (request_firmware((const struct firmware **)&firmware, + SPIDER_NET_FIRMWARE_NAME, &card->pdev->dev) == 0) { + if ( (firmware->size != SPIDER_NET_FIRMWARE_LEN) && + netif_msg_probe(card) ) { + pr_err("Incorrect size of spidernet firmware in " \ + "filesystem. Looking in host firmware...\n"); + goto try_host_fw; + } + err = spider_net_download_firmware(card, firmware->data); + + release_firmware(firmware); + if (err) + goto try_host_fw; + + goto done; + } + +try_host_fw: + dn = pci_device_to_OF_node(card->pdev); + if (!dn) + goto out_err; + + fw_prop = get_property(dn, "firmware", &fw_size); + if (!fw_prop) + goto out_err; + + if ( (fw_size != SPIDER_NET_FIRMWARE_LEN) && + netif_msg_probe(card) ) { + pr_err("Incorrect size of spidernet firmware in " \ + "host firmware\n"); + goto done; + } + + err = spider_net_download_firmware(card, fw_prop); + +done: + return err; +out_err: + if (netif_msg_probe(card)) + pr_err("Couldn't find spidernet firmware in filesystem " \ + "or host firmware\n"); + return err; +} + +/** * spider_net_open - called upon ifonfig up * @netdev: interface device structure * @@ -1719,6 +1837,10 @@ spider_net_open(struct net_device *netdev) struct spider_net_card *card = netdev_priv(netdev); int result; + result = spider_net_init_firmware(card); + if (result) + goto init_firmware_failed; + /* start probing with copper */ spider_net_setup_aneg(card); if (card->phy.def->phy_id) @@ -1762,6 +1884,7 @@ alloc_rx_failed: spider_net_free_chain(card, &card->tx_chain); alloc_tx_failed: del_timer_sync(&card->aneg_timer); +init_firmware_failed: return result; } @@ -1873,124 +1996,6 @@ spider_net_setup_phy(struct spider_net_card *card) } /** - * spider_net_download_firmware - loads firmware into the adapter - * @card: card structure - * @firmware_ptr: pointer to firmware data - * - * spider_net_download_firmware loads the firmware data into the - * adapter. It assumes the length etc. to be allright. - */ -static int -spider_net_download_firmware(struct spider_net_card *card, - const void *firmware_ptr) -{ - int sequencer, i; - const u32 *fw_ptr = firmware_ptr; - - /* stop sequencers */ - spider_net_write_reg(card, SPIDER_NET_GSINIT, - SPIDER_NET_STOP_SEQ_VALUE); - - for (sequencer = 0; sequencer < SPIDER_NET_FIRMWARE_SEQS; - sequencer++) { - spider_net_write_reg(card, - SPIDER_NET_GSnPRGADR + sequencer * 8, 0); - for (i = 0; i < SPIDER_NET_FIRMWARE_SEQWORDS; i++) { - spider_net_write_reg(card, SPIDER_NET_GSnPRGDAT + - sequencer * 8, *fw_ptr); - fw_ptr++; - } - } - - if (spider_net_read_reg(card, SPIDER_NET_GSINIT)) - return -EIO; - - spider_net_write_reg(card, SPIDER_NET_GSINIT, - SPIDER_NET_RUN_SEQ_VALUE); - - return 0; -} - -/** - * spider_net_init_firmware - reads in firmware parts - * @card: card structure - * - * Returns 0 on success, <0 on failure - * - * spider_net_init_firmware opens the sequencer firmware and does some basic - * checks. This function opens and releases the firmware structure. A call - * to download the firmware is performed before the release. - * - * Firmware format - * =============== - * spider_fw.bin is expected to be a file containing 6*1024*4 bytes, 4k being - * the program for each sequencer. Use the command - * tail -q -n +2 Seq_code1_0x088.txt Seq_code2_0x090.txt \ - * Seq_code3_0x098.txt Seq_code4_0x0A0.txt Seq_code5_0x0A8.txt \ - * Seq_code6_0x0B0.txt | xxd -r -p -c4 > spider_fw.bin - * - * to generate spider_fw.bin, if you have sequencer programs with something - * like the following contents for each sequencer: - * <ONE LINE COMMENT> - * <FIRST 4-BYTES-WORD FOR SEQUENCER> - * <SECOND 4-BYTES-WORD FOR SEQUENCER> - * ... - * <1024th 4-BYTES-WORD FOR SEQUENCER> - */ -static int -spider_net_init_firmware(struct spider_net_card *card) -{ - struct firmware *firmware = NULL; - struct device_node *dn; - const u8 *fw_prop = NULL; - int err = -ENOENT; - int fw_size; - - if (request_firmware((const struct firmware **)&firmware, - SPIDER_NET_FIRMWARE_NAME, &card->pdev->dev) == 0) { - if ( (firmware->size != SPIDER_NET_FIRMWARE_LEN) && - netif_msg_probe(card) ) { - pr_err("Incorrect size of spidernet firmware in " \ - "filesystem. Looking in host firmware...\n"); - goto try_host_fw; - } - err = spider_net_download_firmware(card, firmware->data); - - release_firmware(firmware); - if (err) - goto try_host_fw; - - goto done; - } - -try_host_fw: - dn = pci_device_to_OF_node(card->pdev); - if (!dn) - goto out_err; - - fw_prop = get_property(dn, "firmware", &fw_size); - if (!fw_prop) - goto out_err; - - if ( (fw_size != SPIDER_NET_FIRMWARE_LEN) && - netif_msg_probe(card) ) { - pr_err("Incorrect size of spidernet firmware in " \ - "host firmware\n"); - goto done; - } - - err = spider_net_download_firmware(card, fw_prop); - -done: - return err; -out_err: - if (netif_msg_probe(card)) - pr_err("Couldn't find spidernet firmware in filesystem " \ - "or host firmware\n"); - return err; -} - -/** * spider_net_workaround_rxramfull - work around firmware bug * @card: card structure * @@ -2090,8 +2095,6 @@ spider_net_tx_timeout_task(struct work_struct *work) if (spider_net_setup_phy(card)) goto out; - if (spider_net_init_firmware(card)) - goto out; spider_net_open(netdev); spider_net_kick_tx_dma(card); @@ -2363,10 +2366,6 @@ spider_net_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (err) goto out_undo_pci; - err = spider_net_init_firmware(card); - if (err) - goto out_undo_pci; - err = spider_net_setup_netdev(card); if (err) goto out_undo_pci; |