diff options
Diffstat (limited to 'drivers/net/skfp/drvfbi.c')
| -rw-r--r-- | drivers/net/skfp/drvfbi.c | 1529 |
1 files changed, 1529 insertions, 0 deletions
diff --git a/drivers/net/skfp/drvfbi.c b/drivers/net/skfp/drvfbi.c new file mode 100644 index 00000000000..052e841ba18 --- /dev/null +++ b/drivers/net/skfp/drvfbi.c @@ -0,0 +1,1529 @@ +/****************************************************************************** + * + * (C)Copyright 1998,1999 SysKonnect, + * a business unit of Schneider & Koch & Co. Datensysteme GmbH. + * + * See the file "skfddi.c" for further information. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/* + * FBI board dependent Driver for SMT and LLC + */ + +#include "h/types.h" +#include "h/fddi.h" +#include "h/smc.h" +#include "h/supern_2.h" +#include "h/skfbiinc.h" + +#ifndef lint +static const char ID_sccs[] = "@(#)drvfbi.c 1.63 99/02/11 (C) SK " ; +#endif + +/* + * PCM active state + */ +#define PC8_ACTIVE 8 + +#define LED_Y_ON 0x11 /* Used for ring up/down indication */ +#define LED_Y_OFF 0x10 + + +#define MS2BCLK(x) ((x)*12500L) + +/* + * valid configuration values are: + */ +#ifdef ISA +const int opt_ints[] = {8, 3, 4, 5, 9, 10, 11, 12, 15} ; +const int opt_iops[] = {8, + 0x100, 0x120, 0x180, 0x1a0, 0x220, 0x240, 0x320, 0x340}; +const int opt_dmas[] = {4, 3, 5, 6, 7} ; +const int opt_eproms[] = {15, 0xc0, 0xc2, 0xc4, 0xc6, 0xc8, 0xca, 0xcc, 0xce, + 0xd0, 0xd2, 0xd4, 0xd6, 0xd8, 0xda, 0xdc} ; +#endif +#ifdef EISA +const int opt_ints[] = {5, 9, 10, 11} ; +const int opt_dmas[] = {0, 5, 6, 7} ; +const int opt_eproms[] = {0xc0, 0xc2, 0xc4, 0xc6, 0xc8, 0xca, 0xcc, 0xce, + 0xd0, 0xd2, 0xd4, 0xd6, 0xd8, 0xda, 0xdc} ; +#endif + +#ifdef MCA +int opt_ints[] = {3, 11, 10, 9} ; /* FM1 */ +int opt_eproms[] = {0, 0xc4, 0xc8, 0xcc, 0xd0, 0xd4, 0xd8, 0xdc} ; +#endif /* MCA */ + +/* + * xPOS_ID:xxxx + * | \ / + * | \/ + * | --------------------- the patched POS_ID of the Adapter + * | xxxx = (Vendor ID low byte, + * | Vendor ID high byte, + * | Device ID low byte, + * | Device ID high byte) + * +------------------------------ the patched oem_id must be + * 'S' for SK or 'I' for IBM + * this is a short id for the driver. + */ +#ifndef MULT_OEM +#ifndef OEM_CONCEPT +#ifndef MCA +const u_char oem_id[] = "xPOS_ID:xxxx" ; +#else +const u_char oem_id[] = "xPOSID1:xxxx" ; /* FM1 card id. */ +#endif +#else /* OEM_CONCEPT */ +#ifndef MCA +const u_char oem_id[] = OEM_ID ; +#else +const u_char oem_id[] = OEM_ID1 ; /* FM1 card id. */ +#endif /* MCA */ +#endif /* OEM_CONCEPT */ +#define ID_BYTE0 8 +#define OEMID(smc,i) oem_id[ID_BYTE0 + i] +#else /* MULT_OEM */ +const struct s_oem_ids oem_ids[] = { +#include "oemids.h" +{0} +}; +#define OEMID(smc,i) smc->hw.oem_id->oi_id[i] +#endif /* MULT_OEM */ + +/* Prototypes of external functions */ +#ifdef AIX +extern int AIX_vpdReadByte() ; +#endif + + +/* Prototypes of local functions. */ +void smt_stop_watchdog(struct s_smc *smc); + +#ifdef MCA +static int read_card_id() ; +static void DisableSlotAccess() ; +static void EnableSlotAccess() ; +#ifdef AIX +extern int attach_POS_addr() ; +extern int detach_POS_addr() ; +extern u_char read_POS() ; +extern void write_POS() ; +extern int AIX_vpdReadByte() ; +#else +#define read_POS(smc,a1,a2) ((u_char) inp(a1)) +#define write_POS(smc,a1,a2,a3) outp((a1),(a3)) +#endif +#endif /* MCA */ + + +/* + * FDDI card reset + */ +static void card_start(struct s_smc *smc) +{ + int i ; +#ifdef PCI + u_char rev_id ; + u_short word; +#endif + + smt_stop_watchdog(smc) ; + +#ifdef ISA + outpw(CSR_A,0) ; /* reset for all chips */ + for (i = 10 ; i ; i--) /* delay for PLC's */ + (void)inpw(ISR_A) ; + OUT_82c54_TIMER(3,COUNT(2) | RW_OP(3) | TMODE(2)) ; + /* counter 2, mode 2 */ + OUT_82c54_TIMER(2,97) ; /* LSB */ + OUT_82c54_TIMER(2,0) ; /* MSB ( 15.6 us ) */ + outpw(CSR_A,CS_CRESET) ; +#endif +#ifdef EISA + outpw(CSR_A,0) ; /* reset for all chips */ + for (i = 10 ; i ; i--) /* delay for PLC's */ + (void)inpw(ISR_A) ; + outpw(CSR_A,CS_CRESET) ; + smc->hw.led = (2<<6) ; + outpw(CSR_A,CS_CRESET | smc->hw.led) ; +#endif +#ifdef MCA + outp(ADDR(CARD_DIS),0) ; /* reset for all chips */ + for (i = 10 ; i ; i--) /* delay for PLC's */ + (void)inpw(ISR_A) ; + outp(ADDR(CARD_EN),0) ; + /* first I/O after reset must not be a access to FORMAC or PLC */ + + /* + * bus timeout (MCA) + */ + OUT_82c54_TIMER(3,COUNT(2) | RW_OP(3) | TMODE(3)) ; + /* counter 2, mode 3 */ + OUT_82c54_TIMER(2,(2*24)) ; /* 3.9 us * 2 square wave */ + OUT_82c54_TIMER(2,0) ; /* MSB */ + + /* POS 102 indicated an activ Check Line or Buss Error monitoring */ + if (inpw(CSA_A) & (POS_EN_CHKINT | POS_EN_BUS_ERR)) { + outp(ADDR(IRQ_CHCK_EN),0) ; + } + + if (!((i = inpw(CSR_A)) & CS_SAS)) { + if (!(i & CS_BYSTAT)) { + outp(ADDR(BYPASS(STAT_INS)),0) ;/* insert station */ + } + } + outpw(LEDR_A,LED_1) ; /* yellow */ +#endif /* MCA */ +#ifdef PCI + /* + * make sure no transfer activity is pending + */ + outpw(FM_A(FM_MDREG1),FM_MINIT) ; + outp(ADDR(B0_CTRL), CTRL_HPI_SET) ; + hwt_wait_time(smc,hwt_quick_read(smc),MS2BCLK(10)) ; + /* + * now reset everything + */ + outp(ADDR(B0_CTRL),CTRL_RST_SET) ; /* reset for all chips */ + i = (int) inp(ADDR(B0_CTRL)) ; /* do dummy read */ + SK_UNUSED(i) ; /* Make LINT happy. */ + outp(ADDR(B0_CTRL), CTRL_RST_CLR) ; + + /* + * Reset all bits in the PCI STATUS register + */ + outp(ADDR(B0_TST_CTRL), TST_CFG_WRITE_ON) ; /* enable for writes */ + word = inpw(PCI_C(PCI_STATUS)) ; + outpw(PCI_C(PCI_STATUS), word | PCI_ERRBITS) ; + outp(ADDR(B0_TST_CTRL), TST_CFG_WRITE_OFF) ; /* disable writes */ + + /* + * Release the reset of all the State machines + * Release Master_Reset + * Release HPI_SM_Reset + */ + outp(ADDR(B0_CTRL), CTRL_MRST_CLR|CTRL_HPI_CLR) ; + + /* + * determine the adapter type + * Note: Do it here, because some drivers may call card_start() once + * at very first before any other initialization functions is + * executed. + */ + rev_id = inp(PCI_C(PCI_REV_ID)) ; + if ((rev_id & 0xf0) == SK_ML_ID_1 || (rev_id & 0xf0) == SK_ML_ID_2) { + smc->hw.hw_is_64bit = TRUE ; + } else { + smc->hw.hw_is_64bit = FALSE ; + } + + /* + * Watermark initialization + */ + if (!smc->hw.hw_is_64bit) { + outpd(ADDR(B4_R1_F), RX_WATERMARK) ; + outpd(ADDR(B5_XA_F), TX_WATERMARK) ; + outpd(ADDR(B5_XS_F), TX_WATERMARK) ; + } + + outp(ADDR(B0_CTRL),CTRL_RST_CLR) ; /* clear the reset chips */ + outp(ADDR(B0_LED),LED_GA_OFF|LED_MY_ON|LED_GB_OFF) ; /* ye LED on */ + + /* init the timer value for the watch dog 2,5 minutes */ + outpd(ADDR(B2_WDOG_INI),0x6FC23AC0) ; + + /* initialize the ISR mask */ + smc->hw.is_imask = ISR_MASK ; + smc->hw.hw_state = STOPPED ; +#endif + GET_PAGE(0) ; /* necessary for BOOT */ +} + +void card_stop(struct s_smc *smc) +{ + smt_stop_watchdog(smc) ; + smc->hw.mac_ring_is_up = 0 ; /* ring down */ +#ifdef ISA + outpw(CSR_A,0) ; /* reset for all chips */ +#endif +#ifdef EISA + outpw(CSR_A,0) ; /* reset for all chips */ +#endif +#ifdef MCA + outp(ADDR(CARD_DIS),0) ; /* reset for all chips */ +#endif +#ifdef PCI + /* + * make sure no transfer activity is pending + */ + outpw(FM_A(FM_MDREG1),FM_MINIT) ; + outp(ADDR(B0_CTRL), CTRL_HPI_SET) ; + hwt_wait_time(smc,hwt_quick_read(smc),MS2BCLK(10)) ; + /* + * now reset everything + */ + outp(ADDR(B0_CTRL),CTRL_RST_SET) ; /* reset for all chips */ + outp(ADDR(B0_CTRL),CTRL_RST_CLR) ; /* reset for all chips */ + outp(ADDR(B0_LED),LED_GA_OFF|LED_MY_OFF|LED_GB_OFF) ; /* all LEDs off */ + smc->hw.hw_state = STOPPED ; +#endif +} +/*--------------------------- ISR handling ----------------------------------*/ + +void mac1_irq(struct s_smc *smc, u_short stu, u_short stl) +{ + int restart_tx = 0 ; +again: +#ifndef PCI +#ifndef ISA +/* + * FORMAC+ bug modified the queue pointer if many read/write accesses happens!? + */ + if (stl & (FM_SPCEPDS | /* parit/coding err. syn.q.*/ + FM_SPCEPDA0 | /* parit/coding err. a.q.0 */ + FM_SPCEPDA1 | /* parit/coding err. a.q.1 */ + FM_SPCEPDA2)) { /* parit/coding err. a.q.2 */ + SMT_PANIC(smc,SMT_E0132, SMT_E0132_MSG) ; + } + if (stl & (FM_STBURS | /* tx buffer underrun syn.q.*/ + FM_STBURA0 | /* tx buffer underrun a.q.0 */ + FM_STBURA1 | /* tx buffer underrun a.q.1 */ + FM_STBURA2)) { /* tx buffer underrun a.q.2 */ + SMT_PANIC(smc,SMT_E0133, SMT_E0133_MSG) ; + } +#endif + if ( (stu & (FM_SXMTABT | /* transmit abort */ +#ifdef SYNC + FM_STXABRS | /* syn. tx abort */ +#endif /* SYNC */ + FM_STXABRA0)) || /* asyn. tx abort */ + (stl & (FM_SQLCKS | /* lock for syn. q. */ + FM_SQLCKA0)) ) { /* lock for asyn. q. */ + formac_tx_restart(smc) ; /* init tx */ + restart_tx = 1 ; + stu = inpw(FM_A(FM_ST1U)) ; + stl = inpw(FM_A(FM_ST1L)) ; + stu &= ~ (FM_STECFRMA0 | FM_STEFRMA0 | FM_STEFRMS) ; + if (stu || stl) + goto again ; + } + +#ifndef SYNC + if (stu & (FM_STECFRMA0 | /* end of chain asyn tx */ + FM_STEFRMA0)) { /* end of frame asyn tx */ + /* free tx_queue */ + smc->hw.n_a_send = 0 ; + if (++smc->hw.fp.tx_free < smc->hw.fp.tx_max) { + start_next_send(smc); + } + restart_tx = 1 ; + } +#else /* SYNC */ + if (stu & (FM_STEFRMA0 | /* end of asyn tx */ + FM_STEFRMS)) { /* end of sync tx */ + restart_tx = 1 ; + } +#endif /* SYNC */ + if (restart_tx) + llc_restart_tx(smc) ; +} +#else /* PCI */ + + /* + * parity error: note encoding error is not possible in tag mode + */ + if (stl & (FM_SPCEPDS | /* parity err. syn.q.*/ + FM_SPCEPDA0 | /* parity err. a.q.0 */ + FM_SPCEPDA1)) { /* parity err. a.q.1 */ + SMT_PANIC(smc,SMT_E0134, SMT_E0134_MSG) ; + } + /* + * buffer underrun: can only occur if a tx threshold is specified + */ + if (stl & (FM_STBURS | /* tx buffer underrun syn.q.*/ + FM_STBURA0 | /* tx buffer underrun a.q.0 */ + FM_STBURA1)) { /* tx buffer underrun a.q.2 */ + SMT_PANIC(smc,SMT_E0133, SMT_E0133_MSG) ; + } + + if ( (stu & (FM_SXMTABT | /* transmit abort */ + FM_STXABRS | /* syn. tx abort */ + FM_STXABRA0)) || /* asyn. tx abort */ + (stl & (FM_SQLCKS | /* lock for syn. q. */ + FM_SQLCKA0)) ) { /* lock for asyn. q. */ + formac_tx_restart(smc) ; /* init tx */ + restart_tx = 1 ; + stu = inpw(FM_A(FM_ST1U)) ; + stl = inpw(FM_A(FM_ST1L)) ; + stu &= ~ (FM_STECFRMA0 | FM_STEFRMA0 | FM_STEFRMS) ; + if (stu || stl) + goto again ; + } + + if (stu & (FM_STEFRMA0 | /* end of asyn tx */ + FM_STEFRMS)) { /* end of sync tx */ + restart_tx = 1 ; + } + + if (restart_tx) + llc_restart_tx(smc) ; +} +#endif /* PCI */ +/* + * interrupt source= plc1 + * this function is called in nwfbisr.asm + */ +void plc1_irq(struct s_smc *smc) +{ + u_short st = inpw(PLC(PB,PL_INTR_EVENT)) ; + +#if (defined(ISA) || defined(EISA)) + /* reset PLC Int. bits */ + outpw(PLC1_I,inpw(PLC1_I)) ; +#endif + plc_irq(smc,PB,st) ; +} + +/* + * interrupt source= plc2 + * this function is called in nwfbisr.asm + */ +void plc2_irq(struct s_smc *smc) +{ + u_short st = inpw(PLC(PA,PL_INTR_EVENT)) ; + +#if (defined(ISA) || defined(EISA)) + /* reset PLC Int. bits */ + outpw(PLC2_I,inpw(PLC2_I)) ; +#endif + plc_irq(smc,PA,st) ; +} + + +/* + * interrupt source= timer + */ +void timer_irq(struct s_smc *smc) +{ + hwt_restart(smc); + smc->hw.t_stop = smc->hw.t_start; + smt_timer_done(smc) ; +} + +/* + * return S-port (PA or PB) + */ +int pcm_get_s_port(struct s_smc *smc) +{ + SK_UNUSED(smc) ; + return(PS) ; +} + +/* + * Station Label = "FDDI-XYZ" where + * + * X = connector type + * Y = PMD type + * Z = port type + */ +#define STATION_LABEL_CONNECTOR_OFFSET 5 +#define STATION_LABEL_PMD_OFFSET 6 +#define STATION_LABEL_PORT_OFFSET 7 + +void read_address(struct s_smc *smc, u_char *mac_addr) +{ + char ConnectorType ; + char PmdType ; + int i ; + + extern const u_char canonical[256] ; + +#if (defined(ISA) || defined(MCA)) + for (i = 0; i < 4 ;i++) { /* read mac address from board */ + smc->hw.fddi_phys_addr.a[i] = + canonical[(inpw(PR_A(i+SA_MAC))&0xff)] ; + } + for (i = 4; i < 6; i++) { + smc->hw.fddi_phys_addr.a[i] = + canonical[(inpw(PR_A(i+SA_MAC+PRA_OFF))&0xff)] ; + } +#endif +#ifdef EISA + /* + * Note: We get trouble on an Alpha machine if we make a inpw() + * instead of inp() + */ + for (i = 0; i < 4 ;i++) { /* read mac address from board */ + smc->hw.fddi_phys_addr.a[i] = + canonical[inp(PR_A(i+SA_MAC))] ; + } + for (i = 4; i < 6; i++) { + smc->hw.fddi_phys_addr.a[i] = + canonical[inp(PR_A(i+SA_MAC+PRA_OFF))] ; + } +#endif +#ifdef PCI + for (i = 0; i < 6; i++) { /* read mac address from board */ + smc->hw.fddi_phys_addr.a[i] = + canonical[inp(ADDR(B2_MAC_0+i))] ; + } +#endif +#ifndef PCI + ConnectorType = inpw(PR_A(SA_PMD_TYPE)) & 0xff ; + PmdType = inpw(PR_A(SA_PMD_TYPE+1)) & 0xff ; +#else + ConnectorType = inp(ADDR(B2_CONN_TYP)) ; + PmdType = inp(ADDR(B2_PMD_TYP)) ; +#endif + + smc->y[PA].pmd_type[PMD_SK_CONN] = + smc->y[PB].pmd_type[PMD_SK_CONN] = ConnectorType ; + smc->y[PA].pmd_type[PMD_SK_PMD ] = + smc->y[PB].pmd_type[PMD_SK_PMD ] = PmdType ; + + if (mac_addr) { + for (i = 0; i < 6 ;i++) { + smc->hw.fddi_canon_addr.a[i] = mac_addr[i] ; + smc->hw.fddi_home_addr.a[i] = canonical[mac_addr[i]] ; + } + return ; + } + smc->hw.fddi_home_addr = smc->hw.fddi_phys_addr ; + + for (i = 0; i < 6 ;i++) { + smc->hw.fddi_canon_addr.a[i] = + canonical[smc->hw.fddi_phys_addr.a[i]] ; + } +} + +/* + * FDDI card soft reset + */ +void init_board(struct s_smc *smc, u_char *mac_addr) +{ + card_start(smc) ; + read_address(smc,mac_addr) ; + +#ifndef PCI + if (inpw(CSR_A) & CS_SAS) +#else + if (!(inp(ADDR(B0_DAS)) & DAS_AVAIL)) +#endif + smc->s.sas = SMT_SAS ; /* Single att. station */ + else + smc->s.sas = SMT_DAS ; /* Dual att. station */ + +#ifndef PCI + if (inpw(CSR_A) & CS_BYSTAT) +#else + if (!(inp(ADDR(B0_DAS)) & DAS_BYP_ST)) +#endif + smc->mib.fddiSMTBypassPresent = 0 ; + /* without opt. bypass */ + else + smc->mib.fddiSMTBypassPresent = 1 ; + /* with opt. bypass */ +} + +/* + * insert or deinsert optical bypass (called by ECM) + */ +void sm_pm_bypass_req(struct s_smc *smc, int mode) +{ +#if (defined(ISA) || defined(EISA)) + int csra_v ; +#endif + + DB_ECMN(1,"ECM : sm_pm_bypass_req(%s)\n",(mode == BP_INSERT) ? + "BP_INSERT" : "BP_DEINSERT",0) ; + + if (smc->s.sas != SMT_DAS) + return ; + +#if (defined(ISA) || defined(EISA)) + + csra_v = inpw(CSR_A) & ~CS_BYPASS ; +#ifdef EISA + csra_v |= smc->hw.led ; +#endif + + switch(mode) { + case BP_INSERT : + outpw(CSR_A,csra_v | CS_BYPASS) ; + break ; + case BP_DEINSERT : + outpw(CSR_A,csra_v) ; + break ; + } +#endif /* ISA / EISA */ +#ifdef MCA + switch(mode) { + case BP_INSERT : + outp(ADDR(BYPASS(STAT_INS)),0) ;/* insert station */ + break ; + case BP_DEINSERT : + outp(ADDR(BYPASS(STAT_BYP)),0) ; /* bypass station */ + break ; + } +#endif +#ifdef PCI + switch(mode) { + case BP_INSERT : + outp(ADDR(B0_DAS),DAS_BYP_INS) ; /* insert station */ + break ; + case BP_DEINSERT : + outp(ADDR(B0_DAS),DAS_BYP_RMV) ; /* bypass station */ + break ; + } +#endif +} + +/* + * check if bypass connected + */ +int sm_pm_bypass_present(struct s_smc *smc) +{ +#ifndef PCI + return( (inpw(CSR_A) & CS_BYSTAT) ? FALSE : TRUE ) ; +#else + return( (inp(ADDR(B0_DAS)) & DAS_BYP_ST) ? TRUE: FALSE) ; +#endif +} + +void plc_clear_irq(struct s_smc *smc, int p) +{ + SK_UNUSED(p) ; + +#if (defined(ISA) || defined(EISA)) + switch (p) { + case PA : + /* reset PLC Int. bits */ + outpw(PLC2_I,inpw(PLC2_I)) ; + break ; + case PB : + /* reset PLC Int. bits */ + outpw(PLC1_I,inpw(PLC1_I)) ; + break ; + } +#else + SK_UNUSED(smc) ; +#endif +} + + +/* + * led_indication called by rmt_indication() and + * pcm_state_change() + * + * Input: + * smc: SMT context + * led_event: + * 0 Only switch green LEDs according to their respective PCM state + * LED_Y_OFF just switch yellow LED off + * LED_Y_ON just switch yello LED on + */ +void led_indication(struct s_smc *smc, int led_event) +{ + /* use smc->hw.mac_ring_is_up == TRUE + * as indication for Ring Operational + */ + u_short led_state ; + struct s_phy *phy ; + struct fddi_mib_p *mib_a ; + struct fddi_mib_p *mib_b ; + + phy = &smc->y[PA] ; + mib_a = phy->mib ; + phy = &smc->y[PB] ; + mib_b = phy->mib ; + +#ifdef EISA + /* Ring up = yellow led OFF*/ + if (led_event == LED_Y_ON) { + smc->hw.led |= CS_LED_1 ; + } + else if (led_event == LED_Y_OFF) { + smc->hw.led &= ~CS_LED_1 ; + } + else { + /* Link at Port A or B = green led ON */ + if (mib_a->fddiPORTPCMState == PC8_ACTIVE || + mib_b->fddiPORTPCMState == PC8_ACTIVE) { + smc->hw.led |= CS_LED_0 ; + } + else { + smc->hw.led &= ~CS_LED_0 ; + } + } +#endif +#ifdef MCA + led_state = inpw(LEDR_A) ; + + /* Ring up = yellow led OFF*/ + if (led_event == LED_Y_ON) { + led_state |= LED_1 ; + } + else if (led_event == LED_Y_OFF) { + led_state &= ~LED_1 ; + } + else { + led_state &= ~(LED_2|LED_0) ; + + /* Link at Port A = green led A ON */ + if (mib_a->fddiPORTPCMState == PC8_ACTIVE) { + led_state |= LED_2 ; + } + + /* Link at Port B/S = green led B ON */ + if (mib_b->fddiPORTPCMState == PC8_ACTIVE) { + led_state |= LED_0 ; + } + } + + outpw(LEDR_A, led_state) ; +#endif /* MCA */ +#ifdef PCI + led_state = 0 ; + + /* Ring up = yellow led OFF*/ + if (led_event == LED_Y_ON) { + led_state |= LED_MY_ON ; + } + else if (led_event == LED_Y_OFF) { + led_state |= LED_MY_OFF ; + } + else { /* PCM state changed */ + /* Link at Port A/S = green led A ON */ + if (mib_a->fddiPORTPCMState == PC8_ACTIVE) { + led_state |= LED_GA_ON ; + } + else { + led_state |= LED_GA_OFF ; + } + + /* Link at Port B = green led B ON */ + if (mib_b->fddiPORTPCMState == PC8_ACTIVE) { + led_state |= LED_GB_ON ; + } + else { + led_state |= LED_GB_OFF ; + } + } + + outp(ADDR(B0_LED), led_state) ; +#endif /* PCI */ + +} + + +void pcm_state_change(struct s_smc *smc, int plc, int p_state) +{ + /* + * the current implementation of pcm_state_change() in the driver + * parts must be renamed to drv_pcm_state_change() which will be called + * now after led_indication. + */ + DRV_PCM_STATE_CHANGE(smc,plc,p_state) ; + + led_indication(smc,0) ; +} + + +void rmt_indication(struct s_smc *smc, int i) +{ + /* Call a driver special function if defined */ + DRV_RMT_INDICATION(smc,i) ; + + led_indication(smc, i ? LED_Y_OFF : LED_Y_ON) ; +} + + +/* + * llc_recover_tx called by init_tx (fplus.c) + */ +void llc_recover_tx(struct s_smc *smc) +{ +#ifdef LOAD_GEN + extern int load_gen_flag ; + + load_gen_flag = 0 ; +#endif +#ifndef SYNC + smc->hw.n_a_send= 0 ; +#else + SK_UNUSED(smc) ; +#endif +} + +/*--------------------------- DMA init ----------------------------*/ +#ifdef ISA + +/* + * init DMA + */ +void init_dma(struct s_smc *smc, int dma) +{ + SK_UNUSED(smc) ; + + /* + * set cascade mode, + * clear mask bit (enable DMA cannal) + */ + if (dma > 3) { + outp(0xd6,(dma & 0x03) | 0xc0) ; + outp(0xd4, dma & 0x03) ; + } + else { + outp(0x0b,(dma & 0x03) | 0xc0) ; + outp(0x0a,dma & 0x03) ; + } +} + +/* + * disable DMA + */ +void dis_dma(struct s_smc *smc, int dma) +{ + SK_UNUSED(smc) ; + + /* + * set mask bit (disable DMA cannal) + */ + if (dma > 3) { + outp(0xd4,(dma & 0x03) | 0x04) ; + } + else { + outp(0x0a,(dma & 0x03) | 0x04) ; + } +} + +#endif /* ISA */ + +#ifdef EISA + +/*arrays with io addresses of dma controller length and address registers*/ +static const int cntr[8] = { 0x001,0x003,0x005,0x007,0,0x0c6,0x0ca,0x0ce } ; +static const int base[8] = { 0x000,0x002,0x004,0x006,0,0x0c4,0x0c8,0x0cc } ; +static const int page[8] = { 0x087,0x083,0x081,0x082,0,0x08b,0x089,0x08a } ; + +void init_dma(struct s_smc *smc, int dma) +{ + /* + * extended mode register + * 32 bit IO + * type c + * TC output + * disable stop + */ + + /* mode read (write) demand */ + smc->hw.dma_rmode = (dma & 3) | 0x08 | 0x0 ; + smc->hw.dma_wmode = (dma & 3) | 0x04 | 0x0 ; + + /* 32 bit IO's, burst DMA mode (type "C") */ + smc->hw.dma_emode = (dma & 3) | 0x08 | 0x30 ; + + outp((dma < 4) ? 0x40b : 0x4d6,smc->hw.dma_emode) ; + + /* disable chaining */ + outp((dma < 4) ? 0x40a : 0x4d4,(dma&3)) ; + + /*load dma controller addresses for fast access during set dma*/ + smc->hw.dma_base_word_count = cntr[smc->hw.dma]; + smc->hw.dma_base_address = base[smc->hw.dma]; + smc->hw.dma_base_address_page = page[smc->hw.dma]; + +} + +void dis_dma(struct s_smc *smc, int dma) +{ + SK_UNUSED(smc) ; + + outp((dma < 4) ? 0x0a : 0xd4,(dma&3)|4) ;/* mask bit */ +} +#endif /* EISA */ + +#ifdef MCA +void init_dma(struct s_smc *smc, int dma) +{ + SK_UNUSED(smc) ; + SK_UNUSED(dma) ; +} + +void dis_dma(struct s_smc *smc, int dma) +{ + SK_UNUSED(smc) ; + SK_UNUSED(dma) ; +} +#endif + +#ifdef PCI +void init_dma(struct s_smc *smc, int dma) +{ + SK_UNUSED(smc) ; + SK_UNUSED(dma) ; +} + +void dis_dma(struct s_smc *smc, int dma) +{ + SK_UNUSED(smc) ; + SK_UNUSED(dma) ; +} +#endif + +#ifdef MULT_OEM +static int is_equal_num(char comp1[], char comp2[], int num) +{ + int i ; + + for (i = 0 ; i < num ; i++) { + if (comp1[i] != comp2[i]) + return (0) ; + } + return (1) ; +} /* is_equal_num */ + + +/* + * set the OEM ID defaults, and test the contents of the OEM data base + * The default OEM is the first ACTIVE entry in the OEM data base + * + * returns: 0 success + * 1 error in data base + * 2 data base empty + * 3 no active entry + */ +int set_oi_id_def(struct s_smc *smc) +{ + int sel_id ; + int i ; + int act_entries ; + + i = 0 ; + sel_id = -1 ; + act_entries = FALSE ; + smc->hw.oem_id = 0 ; + smc->hw.oem_min_status = OI_STAT_ACTIVE ; + + /* check OEM data base */ + while (oem_ids[i].oi_status) { + switch (oem_ids[i].oi_status) { + case OI_STAT_ACTIVE: + act_entries = TRUE ; /* we have active IDs */ + if (sel_id == -1) + sel_id = i ; /* save the first active ID */ + case OI_STAT_VALID: + case OI_STAT_PRESENT: + i++ ; + break ; /* entry ok */ + default: + return (1) ; /* invalid oi_status */ + } + } + + if (i == 0) + return (2) ; + if (!act_entries) + return (3) ; + + /* ok, we have a valid OEM data base with an active entry */ + smc->hw.oem_id = (struct s_oem_ids *) &oem_ids[sel_id] ; + return (0) ; +} +#endif /* MULT_OEM */ + + +#ifdef MCA +/************************ + * + * BEGIN_MANUAL_ENTRY() + * + * exist_board + * + * Check if an MCA board is present in the specified slot. + * + * int exist_board( + * struct s_smc *smc, + * int slot) ; + * In + * smc - A pointer to the SMT Context struct. + * + * slot - The number of the slot to inspect. + * Out + * 0 = No adapter present. + * 1 = Found FM1 adapter. + * + * Pseudo + * Read MCA ID + * for all valid OEM_IDs + * compare with ID read + * if equal, return 1 + * return(0 + * + * Note + * The smc pointer must be valid now. + * + * END_MANUAL_ENTRY() + * + ************************/ +#define LONG_CARD_ID(lo, hi) ((((hi) & 0xff) << 8) | ((lo) & 0xff)) +int exist_board(struct s_smc *smc, int slot) +{ +#ifdef MULT_OEM + SK_LOC_DECL(u_char,id[2]) ; + int idi ; +#endif /* MULT_OEM */ + + /* No longer valid. */ + if (smc == NULL) + return(0) ; + +#ifndef MULT_OEM + if (read_card_id(smc, slot) + == LONG_CARD_ID(OEMID(smc,0), OEMID(smc,1))) + return (1) ; /* Found FM adapter. */ + +#else /* MULT_OEM */ + idi = read_card_id(smc, slot) ; + id[0] = idi & 0xff ; + id[1] = idi >> 8 ; + + smc->hw.oem_id = (struct s_oem_ids *) &oem_ids[0] ; + for (; smc->hw.oem_id->oi_status != OI_STAT_LAST; smc->hw.oem_id++) { + if (smc->hw.oem_id->oi_status < smc->hw.oem_min_status) + continue ; + + if (is_equal_num(&id[0],&OEMID(smc,0),2)) + return (1) ; + } +#endif /* MULT_OEM */ + return (0) ; /* No adapter found. */ +} + +/************************ + * + * read_card_id + * + * Read the MCA card id from the specified slot. + * In + * smc - A pointer to the SMT Context struct. + * CAVEAT: This pointer may be NULL and *must not* be used within this + * function. It's only purpose is for drivers that need some information + * for the inp() and outp() macros. + * + * slot - The number of the slot for which the card id is returned. + * Out + * Returns the card id read from the specified slot. If an illegal slot + * number is specified, the function returns zero. + * + ************************/ +static int read_card_id(struct s_smc *smc, int slot) +/* struct s_smc *smc ; Do not use. */ +{ + int card_id ; + + SK_UNUSED(smc) ; /* Make LINT happy. */ + if ((slot < 1) || (slot > 15)) /* max 16 slots, 0 = motherboard */ + return (0) ; /* Illegal slot number specified. */ + + EnableSlotAccess(smc, slot) ; + + card_id = ((read_POS(smc,POS_ID_HIGH,slot - 1) & 0xff) << 8) | + (read_POS(smc,POS_ID_LOW,slot - 1) & 0xff) ; + + DisableSlotAccess(smc) ; + + return (card_id) ; +} + +/************************ + * + * BEGIN_MANUAL_ENTRY() + * + * get_board_para + * + * Get adapter configuration information. Fill all board specific + * parameters within the 'smc' structure. + * + * int get_board_para( + * struct s_smc *smc, + * int slot) ; + * In + * smc - A pointer to the SMT Context struct, to which this function will + * write some adapter configuration data. + * + * slot - The number of the slot, in which the adapter is installed. + * Out + * 0 = No adapter present. + * 1 = Ok. + * 2 = Adapter present, but card enable bit not set. + * + * END_MANUAL_ENTRY() + * + ************************/ +int get_board_para(struct s_smc *smc, int slot) +{ + int val ; + int i ; + + /* Check if adapter present & get type of adapter. */ + switch (exist_board(smc, slot)) { + case 0: /* Adapter not present. */ + return (0) ; + case 1: /* FM Rev. 1 */ + smc->hw.rev = FM1_REV ; + smc->hw.VFullRead = 0x0a ; + smc->hw.VFullWrite = 0x05 ; + smc->hw.DmaWriteExtraBytes = 8 ; /* 2 extra words. */ + break ; + } + smc->hw.slot = slot ; + + EnableSlotAccess(smc, slot) ; + + if (!(read_POS(smc,POS_102, slot - 1) & POS_CARD_EN)) { + DisableSlotAccess(smc) ; + return (2) ; /* Card enable bit not set. */ + } + + val = read_POS(smc,POS_104, slot - 1) ; /* I/O, IRQ */ + +#ifndef MEM_MAPPED_IO /* is defined by the operating system */ + i = val & POS_IOSEL ; /* I/O base addr. (0x0200 .. 0xfe00) */ + smc->hw.iop = (i + 1) * 0x0400 - 0x200 ; +#endif + i = ((val & POS_IRQSEL) >> 6) & 0x03 ; /* IRQ <0, 1> */ + smc->hw.irq = opt_ints[i] ; + + /* FPROM base addr. */ + i = ((read_POS(smc,POS_103, slot - 1) & POS_MSEL) >> 4) & 0x07 ; + smc->hw.eprom = opt_eproms[i] ; + + DisableSlotAccess(smc) ; + + /* before this, the smc->hw.iop must be set !!! */ + smc->hw.slot_32 = inpw(CSF_A) & SLOT_32 ; + + return (1) ; +} + +/* Enable access to specified MCA slot. */ +static void EnableSlotAccess(struct s_smc *smc, int slot) +{ + SK_UNUSED(slot) ; + +#ifndef AIX + SK_UNUSED(smc) ; + + /* System mode. */ + outp(POS_SYS_SETUP, POS_SYSTEM) ; + + /* Select slot. */ + outp(POS_CHANNEL_POS, POS_CHANNEL_BIT | (slot-1)) ; +#else + attach_POS_addr (smc) ; +#endif +} + +/* Disable access to MCA slot formerly enabled via EnableSlotAccess(). */ +static void DisableSlotAccess(struct s_smc *smc) +{ +#ifndef AIX + SK_UNUSED(smc) ; + + outp(POS_CHANNEL_POS, 0) ; +#else + detach_POS_addr (smc) ; +#endif +} +#endif /* MCA */ + +#ifdef EISA +#ifndef MEM_MAPPED_IO +#define SADDR(slot) (((slot)<<12)&0xf000) +#else /* MEM_MAPPED_IO */ +#define SADDR(slot) (smc->hw.iop) +#endif /* MEM_MAPPED_IO */ + +/************************ + * + * BEGIN_MANUAL_ENTRY() + * + * exist_board + * + * Check if an EISA board is present in the specified slot. + * + * int exist_board( + * struct s_smc *smc, + * int slot) ; + * In + * smc - A pointer to the SMT Context struct. + * + * slot - The number of the slot to inspect. + * Out + * 0 = No adapter present. + * 1 = Found adapter. + * + * Pseudo + * Read EISA ID + * for all valid OEM_IDs + * compare with ID read + * if equal, return 1 + * return(0 + * + * Note + * The smc pointer must be valid now. + * + ************************/ +int exist_board(struct s_smc *smc, int slot) +{ + int i ; +#ifdef MULT_OEM + SK_LOC_DECL(u_char,id[4]) ; +#endif /* MULT_OEM */ + + /* No longer valid. */ + if (smc == NULL) + return(0); + + SK_UNUSED(slot) ; + +#ifndef MULT_OEM + for (i = 0 ; i < 4 ; i++) { + if (inp(SADDR(slot)+PRA(i)) != OEMID(smc,i)) + return(0) ; + } + return(1) ; +#else /* MULT_OEM */ + for (i = 0 ; i < 4 ; i++) + id[i] = inp(SADDR(slot)+PRA(i)) ; + + smc->hw.oem_id = (struct s_oem_ids *) &oem_ids[0] ; + + for (; smc->hw.oem_id->oi_status != OI_STAT_LAST; smc->hw.oem_id++) { + if (smc->hw.oem_id->oi_status < smc->hw.oem_min_status) + continue ; + + if (is_equal_num(&id[0],&OEMID(smc,0),4)) + return (1) ; + } + return (0) ; /* No adapter found. */ +#endif /* MULT_OEM */ +} + + +int get_board_para(struct s_smc *smc, int slot) +{ + int i ; + + if (!exist_board(smc,slot)) + return(0) ; + + smc->hw.slot = slot ; +#ifndef MEM_MAPPED_IO /* if defined by the operating system */ + smc->hw.iop = SADDR(slot) ; +#endif + + if (!(inp(C0_A(0))&CFG_CARD_EN)) { + return(2) ; /* CFG_CARD_EN bit not set! */ + } + + smc->hw.irq = opt_ints[(inp(C1_A(0)) & CFG_IRQ_SEL)] ; + smc->hw.dma = opt_dmas[((inp(C1_A(0)) & CFG_DRQ_SEL)>>3)] ; + + if ((i = inp(C2_A(0)) & CFG_EPROM_SEL) != 0x0f) + smc->hw.eprom = opt_eproms[i] ; + else + smc->hw.eprom = 0 ; + + smc->hw.DmaWriteExtraBytes = 8 ; + + return(1) ; +} +#endif /* EISA */ + +#ifdef ISA +#ifndef MULT_OEM +const u_char sklogo[6] = SKLOGO_STR ; +#define SIZE_SKLOGO(smc) sizeof(sklogo) +#define SKLOGO(smc,i) sklogo[i] +#else /* MULT_OEM */ +#define SIZE_SKLOGO(smc) smc->hw.oem_id->oi_logo_len +#define SKLOGO(smc,i) smc->hw.oem_id->oi_logo[i] +#endif /* MULT_OEM */ + + +int exist_board(struct s_smc *smc, HW_PTR port) +{ + int i ; +#ifdef MULT_OEM + int bytes_read ; + u_char board_logo[15] ; + SK_LOC_DECL(u_char,id[4]) ; +#endif /* MULT_OEM */ + + /* No longer valid. */ + if (smc == NULL) + return(0); + + SK_UNUSED(smc) ; +#ifndef MULT_OEM + for (i = SADDRL ; i < (signed) (SADDRL+SIZE_SKLOGO(smc)) ; i++) { + if ((u_char)inpw((PRA(i)+port)) != SKLOGO(smc,i-SADDRL)) { + return(0) ; + } + } + + /* check MAC address (S&K or other) */ + for (i = 0 ; i < 3 ; i++) { + if ((u_char)inpw((PRA(i)+port)) != OEMID(smc,i)) + return(0) ; + } + return(1) ; +#else /* MULT_OEM */ + smc->hw.oem_id = (struct s_oem_ids *) &oem_ids[0] ; + board_logo[0] = (u_char)inpw((PRA(SADDRL)+port)) ; + bytes_read = 1 ; + + for (; smc->hw.oem_id->oi_status != OI_STAT_LAST; smc->hw.oem_id++) { + if (smc->hw.oem_id->oi_status < smc->hw.oem_min_status) + continue ; + + /* Test all read bytes with current OEM_entry */ + /* for (i=0; (i<bytes_read) && (i < SIZE_SKLOGO(smc)); i++) { */ + for (i = 0; i < bytes_read; i++) { + if (board_logo[i] != SKLOGO(smc,i)) + break ; + } + + /* If mismatch, switch to next OEM entry */ + if ((board_logo[i] != SKLOGO(smc,i)) && (i < bytes_read)) + continue ; + + --i ; + while (bytes_read < SIZE_SKLOGO(smc)) { + // inpw next byte SK_Logo + i++ ; + board_logo[i] = (u_char)inpw((PRA(SADDRL+i)+port)) ; + bytes_read++ ; + if (board_logo[i] != SKLOGO(smc,i)) + break ; + } + + for (i = 0 ; i < 3 ; i++) + id[i] = (u_char)inpw((PRA(i)+port)) ; + + if ((board_logo[i] == SKLOGO(smc,i)) + && (bytes_read == SIZE_SKLOGO(smc))) { + + if (is_equal_num(&id[0],&OEMID(smc,0),3)) + return(1); + } + } /* for */ + return(0) ; +#endif /* MULT_OEM */ +} + +int get_board_para(struct s_smc *smc, int slot) +{ + SK_UNUSED(smc) ; + SK_UNUSED(slot) ; + return(0) ; /* for ISA not supported */ +} +#endif /* ISA */ + +#ifdef PCI +#ifdef USE_BIOS_FUN +int exist_board(struct s_smc *smc, int slot) +{ + u_short dev_id ; + u_short ven_id ; + int found ; + int i ; + + found = FALSE ; /* make sure we returned with adatper not found*/ + /* if an empty oemids.h was included */ + +#ifdef MULT_OEM + smc->hw.oem_id = (struct s_oem_ids *) &oem_ids[0] ; + for (; smc->hw.oem_id->oi_status != OI_STAT_LAST; smc->hw.oem_id++) { + if (smc->hw.oem_id->oi_status < smc->hw.oem_min_status) + continue ; +#endif + ven_id = OEMID(smc,0) + (OEMID(smc,1) << 8) ; + dev_id = OEMID(smc,2) + (OEMID(smc,3) << 8) ; + for (i = 0; i < slot; i++) { + if (pci_find_device(i,&smc->hw.pci_handle, + dev_id,ven_id) != 0) { + + found = FALSE ; + } else { + found = TRUE ; + } + } + if (found) { + return(1) ; /* adapter was found */ + } +#ifdef MULT_OEM + } +#endif + return(0) ; /* adapter was not found */ +} +#endif /* PCI */ +#endif /* USE_BIOS_FUNC */ + +void driver_get_bia(struct s_smc *smc, struct fddi_addr *bia_addr) +{ + int i ; + + extern const u_char canonical[256] ; + + for (i = 0 ; i < 6 ; i++) { + bia_addr->a[i] = canonical[smc->hw.fddi_phys_addr.a[i]] ; + } +} + +void smt_start_watchdog(struct s_smc *smc) +{ + SK_UNUSED(smc) ; /* Make LINT happy. */ + +#ifndef DEBUG + +#ifdef PCI + if (smc->hw.wdog_used) { + outpw(ADDR(B2_WDOG_CRTL),TIM_START) ; /* Start timer. */ + } +#endif + +#endif /* DEBUG */ +} + +void smt_stop_watchdog(struct s_smc *smc) +{ + SK_UNUSED(smc) ; /* Make LINT happy. */ +#ifndef DEBUG + +#ifdef PCI + if (smc->hw.wdog_used) { + outpw(ADDR(B2_WDOG_CRTL),TIM_STOP) ; /* Stop timer. */ + } +#endif + +#endif /* DEBUG */ +} + +#ifdef PCI +static char get_rom_byte(struct s_smc *smc, u_short addr) +{ + GET_PAGE(addr) ; + return (READ_PROM(ADDR(B2_FDP))) ; +} + +/* + * ROM image defines + */ +#define ROM_SIG_1 0 +#define ROM_SIG_2 1 +#define PCI_DATA_1 0x18 +#define PCI_DATA_2 0x19 + +/* + * PCI data structure defines + */ +#define VPD_DATA_1 0x08 +#define VPD_DATA_2 0x09 +#define IMAGE_LEN_1 0x10 +#define IMAGE_LEN_2 0x11 +#define CODE_TYPE 0x14 +#define INDICATOR 0x15 + +/* + * BEGIN_MANUAL_ENTRY(mac_drv_vpd_read) + * mac_drv_vpd_read(smc,buf,size,image) + * + * function DOWNCALL (FDDIWARE) + * reads the VPD data of the FPROM and writes it into the + * buffer + * + * para buf points to the buffer for the VPD data + * size size of the VPD data buffer + * image boot image; code type of the boot image + * image = 0 Intel x86, PC-AT compatible + * 1 OPENBOOT standard for PCI + * 2-FF reserved + * + * returns len number of VPD data bytes read form the FPROM + * <0 number of read bytes + * >0 error: data invalid + * + * END_MANUAL_ENTRY + */ +int mac_drv_vpd_read(struct s_smc *smc, char *buf, int size, char image) +{ + u_short ibase ; + u_short pci_base ; + u_short vpd ; + int len ; + + len = 0 ; + ibase = 0 ; + /* + * as long images defined + */ + while (get_rom_byte(smc,ibase+ROM_SIG_1) == 0x55 && + (u_char) get_rom_byte(smc,ibase+ROM_SIG_2) == 0xaa) { + /* + * get the pointer to the PCI data structure + */ + pci_base = ibase + get_rom_byte(smc,ibase+PCI_DATA_1) + + (get_rom_byte(smc,ibase+PCI_DATA_2) << 8) ; + + if (image == get_rom_byte(smc,pci_base+CODE_TYPE)) { + /* + * we have the right image, read the VPD data + */ + vpd = ibase + get_rom_byte(smc,pci_base+VPD_DATA_1) + + (get_rom_byte(smc,pci_base+VPD_DATA_2) << 8) ; + if (vpd == ibase) { + break ; /* no VPD data */ + } + for (len = 0; len < size; len++,buf++,vpd++) { + *buf = get_rom_byte(smc,vpd) ; + } + break ; + } + else { + /* + * try the next image + */ + if (get_rom_byte(smc,pci_base+INDICATOR) & 0x80) { + break ; /* this was the last image */ + } + ibase = ibase + get_rom_byte(smc,ibase+IMAGE_LEN_1) + + (get_rom_byte(smc,ibase+IMAGE_LEN_2) << 8) ; + } + } + + return(len) ; +} + +void mac_drv_pci_fix(struct s_smc *smc, u_long fix_value) +{ + smc->hw.pci_fix_value = fix_value ; +} + +void mac_do_pci_fix(struct s_smc *smc) +{ + SK_UNUSED(smc) ; +} +#endif /* PCI */ + |