aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/sfc/tenxpress.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/sfc/tenxpress.c')
-rw-r--r--drivers/net/sfc/tenxpress.c149
1 files changed, 39 insertions, 110 deletions
diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c
index c0146061c32..d507c93d666 100644
--- a/drivers/net/sfc/tenxpress.c
+++ b/drivers/net/sfc/tenxpress.c
@@ -65,25 +65,10 @@
#define PMA_PMD_LED_DEFAULT (PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN)
-/* Self test (BIST) control register */
-#define PMA_PMD_BIST_CTRL_REG (0xc014)
-#define PMA_PMD_BIST_BER_LBN (2) /* Run BER test */
-#define PMA_PMD_BIST_CONT_LBN (1) /* Run continuous BIST until cleared */
-#define PMA_PMD_BIST_SINGLE_LBN (0) /* Run 1 BIST iteration (self clears) */
-/* Self test status register */
-#define PMA_PMD_BIST_STAT_REG (0xc015)
-#define PMA_PMD_BIST_ENX_LBN (3)
-#define PMA_PMD_BIST_PMA_LBN (2)
-#define PMA_PMD_BIST_RXD_LBN (1)
-#define PMA_PMD_BIST_AFE_LBN (0)
-
/* Special Software reset register */
#define PMA_PMD_EXT_CTRL_REG 49152
#define PMA_PMD_EXT_SSR_LBN 15
-#define BIST_MAX_DELAY (1000)
-#define BIST_POLL_DELAY (10)
-
/* Misc register defines */
#define PCS_CLOCK_CTRL_REG 0xd801
#define PLL312_RST_N_LBN 2
@@ -119,27 +104,12 @@ MODULE_PARM_DESC(crc_error_reset_threshold,
"Max number of CRC errors before XAUI reset");
struct tenxpress_phy_data {
- enum tenxpress_state state;
enum efx_loopback_mode loopback_mode;
atomic_t bad_crc_count;
- int tx_disabled;
+ enum efx_phy_mode phy_mode;
int bad_lp_tries;
};
-static int tenxpress_state_is(struct efx_nic *efx, int state)
-{
- struct tenxpress_phy_data *phy_data = efx->phy_data;
- return (phy_data != NULL) && (state == phy_data->state);
-}
-
-void tenxpress_set_state(struct efx_nic *efx,
- enum tenxpress_state state)
-{
- struct tenxpress_phy_data *phy_data = efx->phy_data;
- if (phy_data != NULL)
- phy_data->state = state;
-}
-
void tenxpress_crc_err(struct efx_nic *efx)
{
struct tenxpress_phy_data *phy_data = efx->phy_data;
@@ -176,8 +146,6 @@ static int tenxpress_phy_check(struct efx_nic *efx)
return 0;
}
-static void tenxpress_reset_xaui(struct efx_nic *efx);
-
static int tenxpress_init(struct efx_nic *efx)
{
int rc, reg;
@@ -214,15 +182,12 @@ static int tenxpress_phy_init(struct efx_nic *efx)
if (!phy_data)
return -ENOMEM;
efx->phy_data = phy_data;
+ phy_data->phy_mode = efx->phy_mode;
- tenxpress_set_state(efx, TENXPRESS_STATUS_NORMAL);
-
- if (!sfe4001_phy_flash_cfg) {
- rc = mdio_clause45_wait_reset_mmds(efx,
- TENXPRESS_REQUIRED_DEVS);
- if (rc < 0)
- goto fail;
- }
+ rc = mdio_clause45_wait_reset_mmds(efx,
+ TENXPRESS_REQUIRED_DEVS);
+ if (rc < 0)
+ goto fail;
rc = mdio_clause45_check_mmds(efx, TENXPRESS_REQUIRED_DEVS, 0);
if (rc < 0)
@@ -249,7 +214,10 @@ static int tenxpress_special_reset(struct efx_nic *efx)
{
int rc, reg;
- EFX_TRACE(efx, "%s\n", __func__);
+ /* The XGMAC clock is driven from the SFC7101/SFT9001 312MHz clock, so
+ * a special software reset can glitch the XGMAC sufficiently for stats
+ * requests to fail. Since we don't ofen special_reset, just lock. */
+ spin_lock(&efx->stats_lock);
/* Initiate reset */
reg = mdio_clause45_read(efx, efx->mii.phy_id,
@@ -258,23 +226,25 @@ static int tenxpress_special_reset(struct efx_nic *efx)
mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
PMA_PMD_EXT_CTRL_REG, reg);
- msleep(200);
+ mdelay(200);
/* Wait for the blocks to come out of reset */
rc = mdio_clause45_wait_reset_mmds(efx,
TENXPRESS_REQUIRED_DEVS);
if (rc < 0)
- return rc;
+ goto unlock;
/* Try and reconfigure the device */
rc = tenxpress_init(efx);
if (rc < 0)
- return rc;
+ goto unlock;
- return 0;
+unlock:
+ spin_unlock(&efx->stats_lock);
+ return rc;
}
-static void tenxpress_set_bad_lp(struct efx_nic *efx, int bad_lp)
+static void tenxpress_set_bad_lp(struct efx_nic *efx, bool bad_lp)
{
struct tenxpress_phy_data *pd = efx->phy_data;
int reg;
@@ -311,15 +281,15 @@ static void tenxpress_set_bad_lp(struct efx_nic *efx, int bad_lp)
* into a non-10GBT port and if so warn the user that they won't get
* link any time soon as we are 10GBT only, unless caller specified
* not to do this check (it isn't useful in loopback) */
-static int tenxpress_link_ok(struct efx_nic *efx, int check_lp)
+static bool tenxpress_link_ok(struct efx_nic *efx, bool check_lp)
{
- int ok = mdio_clause45_links_ok(efx, TENXPRESS_REQUIRED_DEVS);
+ bool ok = mdio_clause45_links_ok(efx, TENXPRESS_REQUIRED_DEVS);
if (ok) {
- tenxpress_set_bad_lp(efx, 0);
+ tenxpress_set_bad_lp(efx, false);
} else if (check_lp) {
/* Are we plugged into the wrong sort of link? */
- int bad_lp = 0;
+ bool bad_lp = false;
int phy_id = efx->mii.phy_id;
int an_stat = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
MDIO_AN_STATUS);
@@ -332,7 +302,7 @@ static int tenxpress_link_ok(struct efx_nic *efx, int check_lp)
* bit has the advantage of not clearing when autoneg
* restarts. */
if (!(xphy_stat & (1 << PMA_PMD_XSTAT_FLP_LBN))) {
- tenxpress_set_bad_lp(efx, 0);
+ tenxpress_set_bad_lp(efx, false);
return ok;
}
@@ -367,16 +337,19 @@ static void tenxpress_phyxs_loopback(struct efx_nic *efx)
static void tenxpress_phy_reconfigure(struct efx_nic *efx)
{
struct tenxpress_phy_data *phy_data = efx->phy_data;
- int loop_change = LOOPBACK_OUT_OF(phy_data, efx,
- TENXPRESS_LOOPBACKS);
+ bool loop_change = LOOPBACK_OUT_OF(phy_data, efx,
+ TENXPRESS_LOOPBACKS);
- if (!tenxpress_state_is(efx, TENXPRESS_STATUS_NORMAL))
+ if (efx->phy_mode & PHY_MODE_SPECIAL) {
+ phy_data->phy_mode = efx->phy_mode;
return;
+ }
/* When coming out of transmit disable, coming out of low power
* mode, or moving out of any PHY internal loopback mode,
* perform a special software reset */
- if ((phy_data->tx_disabled && !efx->tx_disabled) ||
+ if ((efx->phy_mode == PHY_MODE_NORMAL &&
+ phy_data->phy_mode != PHY_MODE_NORMAL) ||
loop_change) {
tenxpress_special_reset(efx);
falcon_reset_xaui(efx);
@@ -386,9 +359,9 @@ static void tenxpress_phy_reconfigure(struct efx_nic *efx)
mdio_clause45_phy_reconfigure(efx);
tenxpress_phyxs_loopback(efx);
- phy_data->tx_disabled = efx->tx_disabled;
phy_data->loopback_mode = efx->loopback_mode;
- efx->link_up = tenxpress_link_ok(efx, 0);
+ phy_data->phy_mode = efx->phy_mode;
+ efx->link_up = tenxpress_link_ok(efx, false);
efx->link_options = GM_LPA_10000FULL;
}
@@ -402,16 +375,14 @@ static void tenxpress_phy_clear_interrupt(struct efx_nic *efx)
static int tenxpress_phy_check_hw(struct efx_nic *efx)
{
struct tenxpress_phy_data *phy_data = efx->phy_data;
- int phy_up = tenxpress_state_is(efx, TENXPRESS_STATUS_NORMAL);
- int link_ok;
+ bool link_ok;
- link_ok = phy_up && tenxpress_link_ok(efx, 1);
+ link_ok = tenxpress_link_ok(efx, true);
if (link_ok != efx->link_up)
falcon_xmac_sim_phy_event(efx);
- /* Nothing to check if we've already shut down the PHY */
- if (!phy_up)
+ if (phy_data->phy_mode != PHY_MODE_NORMAL)
return 0;
if (atomic_read(&phy_data->bad_crc_count) > crc_error_reset_threshold) {
@@ -444,7 +415,7 @@ static void tenxpress_phy_fini(struct efx_nic *efx)
/* Set the RX and TX LEDs and Link LED flashing. The other LEDs
* (which probably aren't wired anyway) are left in AUTO mode */
-void tenxpress_phy_blink(struct efx_nic *efx, int blink)
+void tenxpress_phy_blink(struct efx_nic *efx, bool blink)
{
int reg;
@@ -459,52 +430,10 @@ void tenxpress_phy_blink(struct efx_nic *efx, int blink)
PMA_PMD_LED_OVERR_REG, reg);
}
-static void tenxpress_reset_xaui(struct efx_nic *efx)
+static int tenxpress_phy_test(struct efx_nic *efx)
{
- int phy = efx->mii.phy_id;
- int clk_ctrl, test_select, soft_rst2;
-
- /* Real work is done on clock_ctrl other resets are thought to be
- * optional but make the reset more reliable
- */
-
- /* Read */
- clk_ctrl = mdio_clause45_read(efx, phy, MDIO_MMD_PCS,
- PCS_CLOCK_CTRL_REG);
- test_select = mdio_clause45_read(efx, phy, MDIO_MMD_PCS,
- PCS_TEST_SELECT_REG);
- soft_rst2 = mdio_clause45_read(efx, phy, MDIO_MMD_PCS,
- PCS_SOFT_RST2_REG);
-
- /* Put in reset */
- test_select &= ~(1 << CLK312_EN_LBN);
- mdio_clause45_write(efx, phy, MDIO_MMD_PCS,
- PCS_TEST_SELECT_REG, test_select);
-
- soft_rst2 &= ~((1 << XGXS_RST_N_LBN) | (1 << SERDES_RST_N_LBN));
- mdio_clause45_write(efx, phy, MDIO_MMD_PCS,
- PCS_SOFT_RST2_REG, soft_rst2);
-
- clk_ctrl &= ~(1 << PLL312_RST_N_LBN);
- mdio_clause45_write(efx, phy, MDIO_MMD_PCS,
- PCS_CLOCK_CTRL_REG, clk_ctrl);
- udelay(10);
-
- /* Remove reset */
- clk_ctrl |= (1 << PLL312_RST_N_LBN);
- mdio_clause45_write(efx, phy, MDIO_MMD_PCS,
- PCS_CLOCK_CTRL_REG, clk_ctrl);
- udelay(10);
-
- soft_rst2 |= ((1 << XGXS_RST_N_LBN) | (1 << SERDES_RST_N_LBN));
- mdio_clause45_write(efx, phy, MDIO_MMD_PCS,
- PCS_SOFT_RST2_REG, soft_rst2);
- udelay(10);
-
- test_select |= (1 << CLK312_EN_LBN);
- mdio_clause45_write(efx, phy, MDIO_MMD_PCS,
- PCS_TEST_SELECT_REG, test_select);
- udelay(10);
+ /* BIST is automatically run after a special software reset */
+ return tenxpress_special_reset(efx);
}
struct efx_phy_operations falcon_tenxpress_phy_ops = {
@@ -513,7 +442,7 @@ struct efx_phy_operations falcon_tenxpress_phy_ops = {
.check_hw = tenxpress_phy_check_hw,
.fini = tenxpress_phy_fini,
.clear_interrupt = tenxpress_phy_clear_interrupt,
- .reset_xaui = tenxpress_reset_xaui,
+ .test = tenxpress_phy_test,
.mmds = TENXPRESS_REQUIRED_DEVS,
.loopbacks = TENXPRESS_LOOPBACKS,
};
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-26 01:28:55 +0000