1 files changed, 431 insertions, 97 deletions

diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c
index 7256ea4abf9..b3ca2dc8040 100644
--- a/drivers/net/sfc/tenxpress.c
+++ b/drivers/net/sfc/tenxpress.c
@@ -15,38 +15,71 @@
 #include "phy.h"
 #include "falcon_hwdefs.h"
 #include "boards.h"
+#include "workarounds.h"
+#include "selftest.h"
 
-/* We expect these MMDs to be in the package */
+/* We expect these MMDs to be in the package.  SFT9001 also has a
+ * clause 22 extension MMD, but since it doesn't have all the generic
+ * MMD registers it is pointless to include it here.
+ */
 #define TENXPRESS_REQUIRED_DEVS (MDIO_MMDREG_DEVS_PMAPMD	| \
 				 MDIO_MMDREG_DEVS_PCS		| \
 				 MDIO_MMDREG_DEVS_PHYXS		| \
 				 MDIO_MMDREG_DEVS_AN)
 
-#define TENXPRESS_LOOPBACKS ((1 << LOOPBACK_PHYXS) |	\
-			     (1 << LOOPBACK_PCS) |	\
-			     (1 << LOOPBACK_PMAPMD) |	\
-			     (1 << LOOPBACK_NETWORK))
+#define SFX7101_LOOPBACKS ((1 << LOOPBACK_PHYXS) |	\
+			   (1 << LOOPBACK_PCS) |	\
+			   (1 << LOOPBACK_PMAPMD) |	\
+			   (1 << LOOPBACK_NETWORK))
+
+#define SFT9001_LOOPBACKS ((1 << LOOPBACK_GPHY) |	\
+			   (1 << LOOPBACK_PHYXS) |	\
+			   (1 << LOOPBACK_PCS) |	\
+			   (1 << LOOPBACK_PMAPMD) |	\
+			   (1 << LOOPBACK_NETWORK))
 
 /* We complain if we fail to see the link partner as 10G capable this many
  * times in a row (must be > 1 as sampling the autoneg. registers is racy)
  */
 #define MAX_BAD_LP_TRIES	(5)
 
+/* LASI Control */
+#define PMA_PMD_LASI_CTRL	36866
+#define PMA_PMD_LASI_STATUS	36869
+#define PMA_PMD_LS_ALARM_LBN	0
+#define PMA_PMD_LS_ALARM_WIDTH	1
+#define PMA_PMD_TX_ALARM_LBN	1
+#define PMA_PMD_TX_ALARM_WIDTH	1
+#define PMA_PMD_RX_ALARM_LBN	2
+#define PMA_PMD_RX_ALARM_WIDTH	1
+#define PMA_PMD_AN_ALARM_LBN	3
+#define PMA_PMD_AN_ALARM_WIDTH	1
+
 /* Extended control register */
-#define	PMA_PMD_XCONTROL_REG 0xc000
-#define	PMA_PMD_LNPGA_POWERDOWN_LBN 8
-#define	PMA_PMD_LNPGA_POWERDOWN_WIDTH 1
+#define PMA_PMD_XCONTROL_REG	49152
+#define PMA_PMD_EXT_GMII_EN_LBN	1
+#define PMA_PMD_EXT_GMII_EN_WIDTH 1
+#define PMA_PMD_EXT_CLK_OUT_LBN	2
+#define PMA_PMD_EXT_CLK_OUT_WIDTH 1
+#define PMA_PMD_LNPGA_POWERDOWN_LBN 8	/* SFX7101 only */
+#define PMA_PMD_LNPGA_POWERDOWN_WIDTH 1
+#define PMA_PMD_EXT_CLK312_LBN	8	/* SFT9001 only */
+#define PMA_PMD_EXT_CLK312_WIDTH 1
+#define PMA_PMD_EXT_LPOWER_LBN  12
+#define PMA_PMD_EXT_LPOWER_WIDTH 1
+#define PMA_PMD_EXT_SSR_LBN	15
+#define PMA_PMD_EXT_SSR_WIDTH	1
 
 /* extended status register */
-#define PMA_PMD_XSTATUS_REG 0xc001
+#define PMA_PMD_XSTATUS_REG	49153
 #define PMA_PMD_XSTAT_FLP_LBN   (12)
 
 /* LED control register */
-#define PMA_PMD_LED_CTRL_REG	(0xc007)
+#define PMA_PMD_LED_CTRL_REG	49159
 #define PMA_PMA_LED_ACTIVITY_LBN	(3)
 
 /* LED function override register */
-#define PMA_PMD_LED_OVERR_REG	(0xc009)
+#define PMA_PMD_LED_OVERR_REG	49161
 /* Bit positions for different LEDs (there are more but not wired on SFE4001)*/
 #define PMA_PMD_LED_LINK_LBN	(0)
 #define PMA_PMD_LED_SPEED_LBN	(2)
@@ -63,36 +96,74 @@
 /* Green and Amber under hardware control, Red off */
 #define PMA_PMD_LED_DEFAULT	(PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN)
 
-
-/* Special Software reset register */
-#define PMA_PMD_EXT_CTRL_REG 49152
-#define PMA_PMD_EXT_SSR_LBN 15
-
-/* Misc register defines */
-#define PCS_CLOCK_CTRL_REG 0xd801
+#define PMA_PMD_SPEED_ENABLE_REG 49192
+#define PMA_PMD_100TX_ADV_LBN    1
+#define PMA_PMD_100TX_ADV_WIDTH  1
+#define PMA_PMD_1000T_ADV_LBN    2
+#define PMA_PMD_1000T_ADV_WIDTH  1
+#define PMA_PMD_10000T_ADV_LBN   3
+#define PMA_PMD_10000T_ADV_WIDTH 1
+#define PMA_PMD_SPEED_LBN        4
+#define PMA_PMD_SPEED_WIDTH      4
+
+/* Serdes control registers - SFT9001 only */
+#define PMA_PMD_CSERDES_CTRL_REG 64258
+/* Set the 156.25 MHz output to 312.5 MHz to drive Falcon's XMAC */
+#define PMA_PMD_CSERDES_DEFAULT	0x000f
+
+/* Misc register defines - SFX7101 only */
+#define PCS_CLOCK_CTRL_REG	55297
 #define PLL312_RST_N_LBN 2
 
-#define PCS_SOFT_RST2_REG 0xd806
+#define PCS_SOFT_RST2_REG	55302
 #define SERDES_RST_N_LBN 13
 #define XGXS_RST_N_LBN 12
 
-#define	PCS_TEST_SELECT_REG 0xd807	/* PRM 10.5.8 */
+#define	PCS_TEST_SELECT_REG	55303	/* PRM 10.5.8 */
 #define	CLK312_EN_LBN 3
 
 /* PHYXS registers */
+#define PHYXS_XCONTROL_REG	49152
+#define PHYXS_RESET_LBN		15
+#define PHYXS_RESET_WIDTH	1
+
 #define PHYXS_TEST1         (49162)
 #define LOOPBACK_NEAR_LBN   (8)
 #define LOOPBACK_NEAR_WIDTH (1)
 
+#define PCS_10GBASET_STAT1       32
+#define PCS_10GBASET_BLKLK_LBN   0
+#define PCS_10GBASET_BLKLK_WIDTH 1
+
 /* Boot status register */
-#define PCS_BOOT_STATUS_REG	(0xd000)
+#define PCS_BOOT_STATUS_REG	53248
 #define PCS_BOOT_FATAL_ERR_LBN	(0)
 #define PCS_BOOT_PROGRESS_LBN	(1)
 #define PCS_BOOT_PROGRESS_WIDTH	(2)
 #define PCS_BOOT_COMPLETE_LBN	(3)
+
 #define PCS_BOOT_MAX_DELAY	(100)
 #define PCS_BOOT_POLL_DELAY	(10)
 
+/* 100M/1G PHY registers */
+#define GPHY_XCONTROL_REG	49152
+#define GPHY_ISOLATE_LBN	10
+#define GPHY_ISOLATE_WIDTH	1
+#define GPHY_DUPLEX_LBN	  	8
+#define GPHY_DUPLEX_WIDTH	1
+#define GPHY_LOOPBACK_NEAR_LBN	14
+#define GPHY_LOOPBACK_NEAR_WIDTH 1
+
+#define C22EXT_STATUS_REG       49153
+#define C22EXT_STATUS_LINK_LBN  2
+#define C22EXT_STATUS_LINK_WIDTH 1
+
+#define C22EXT_MSTSLV_REG       49162
+#define C22EXT_MSTSLV_1000_HD_LBN 10
+#define C22EXT_MSTSLV_1000_HD_WIDTH 1
+#define C22EXT_MSTSLV_1000_FD_LBN 11
+#define C22EXT_MSTSLV_1000_FD_WIDTH 1
+
 /* Time to wait between powering down the LNPGA and turning off the power
  * rails */
 #define LNPGA_PDOWN_WAIT	(HZ / 5)
@@ -116,6 +187,38 @@ void tenxpress_crc_err(struct efx_nic *efx)
 		atomic_inc(&phy_data->bad_crc_count);
 }
 
+static ssize_t show_phy_short_reach(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct efx_nic *efx = pci_get_drvdata(to_pci_dev(dev));
+	int reg;
+
+	reg = mdio_clause45_read(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
+				 MDIO_PMAPMD_10GBT_TXPWR);
+	return sprintf(buf, "%d\n",
+		       !!(reg & (1 << MDIO_PMAPMD_10GBT_TXPWR_SHORT_LBN)));
+}
+
+static ssize_t set_phy_short_reach(struct device *dev,
+				   struct device_attribute *attr,
+				   const char *buf, size_t count)
+{
+	struct efx_nic *efx = pci_get_drvdata(to_pci_dev(dev));
+
+	rtnl_lock();
+	mdio_clause45_set_flag(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
+			       MDIO_PMAPMD_10GBT_TXPWR,
+			       MDIO_PMAPMD_10GBT_TXPWR_SHORT_LBN,
+			       count != 0 && *buf != '0');
+	efx_reconfigure_port(efx);
+	rtnl_unlock();
+
+	return count;
+}
+
+static DEVICE_ATTR(phy_short_reach, 0644, show_phy_short_reach,
+		   set_phy_short_reach);
+
 /* Check that the C166 has booted successfully */
 static int tenxpress_phy_check(struct efx_nic *efx)
 {
@@ -147,27 +250,42 @@ static int tenxpress_phy_check(struct efx_nic *efx)
 
 static int tenxpress_init(struct efx_nic *efx)
 {
-	int rc, reg;
+	int phy_id = efx->mii.phy_id;
+	int reg;
+	int rc;
 
-	/* Turn on the clock  */
-	reg = (1 << CLK312_EN_LBN);
-	mdio_clause45_write(efx, efx->mii.phy_id,
-			    MDIO_MMD_PCS, PCS_TEST_SELECT_REG, reg);
+	if (efx->phy_type == PHY_TYPE_SFX7101) {
+		/* Enable 312.5 MHz clock */
+		mdio_clause45_write(efx, phy_id,
+				    MDIO_MMD_PCS, PCS_TEST_SELECT_REG,
+				    1 << CLK312_EN_LBN);
+	} else {
+		/* Enable 312.5 MHz clock and GMII */
+		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
+					 PMA_PMD_XCONTROL_REG);
+		reg |= ((1 << PMA_PMD_EXT_GMII_EN_LBN) |
+			(1 << PMA_PMD_EXT_CLK_OUT_LBN) |
+			(1 << PMA_PMD_EXT_CLK312_LBN));
+		mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD,
+				    PMA_PMD_XCONTROL_REG, reg);
+		mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_C22EXT,
+				       GPHY_XCONTROL_REG, GPHY_ISOLATE_LBN,
+				       false);
+	}
 
 	rc = tenxpress_phy_check(efx);
 	if (rc < 0)
 		return rc;
 
 	/* Set the LEDs up as: Green = Link, Amber = Link/Act, Red = Off */
-	reg = mdio_clause45_read(efx, efx->mii.phy_id,
-				 MDIO_MMD_PMAPMD, PMA_PMD_LED_CTRL_REG);
-	reg |= (1 << PMA_PMA_LED_ACTIVITY_LBN);
-	mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
-			    PMA_PMD_LED_CTRL_REG, reg);
-
-	reg = PMA_PMD_LED_DEFAULT;
-	mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
-			    PMA_PMD_LED_OVERR_REG, reg);
+	if (efx->phy_type == PHY_TYPE_SFX7101) {
+		mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_PMAPMD,
+				       PMA_PMD_LED_CTRL_REG,
+				       PMA_PMA_LED_ACTIVITY_LBN,
+				       true);
+		mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD,
+				    PMA_PMD_LED_OVERR_REG, PMA_PMD_LED_DEFAULT);
+	}
 
 	return rc;
 }
@@ -183,22 +301,43 @@ static int tenxpress_phy_init(struct efx_nic *efx)
 	efx->phy_data = phy_data;
 	phy_data->phy_mode = efx->phy_mode;
 
-	rc = mdio_clause45_wait_reset_mmds(efx,
-					   TENXPRESS_REQUIRED_DEVS);
-	if (rc < 0)
-		goto fail;
+	if (!(efx->phy_mode & PHY_MODE_SPECIAL)) {
+		if (efx->phy_type == PHY_TYPE_SFT9001A) {
+			int reg;
+			reg = mdio_clause45_read(efx, efx->mii.phy_id,
+						 MDIO_MMD_PMAPMD,
+						 PMA_PMD_XCONTROL_REG);
+			reg |= (1 << PMA_PMD_EXT_SSR_LBN);
+			mdio_clause45_write(efx, efx->mii.phy_id,
+					    MDIO_MMD_PMAPMD,
+					    PMA_PMD_XCONTROL_REG, reg);
+			mdelay(200);
+		}
 
-	rc = mdio_clause45_check_mmds(efx, TENXPRESS_REQUIRED_DEVS, 0);
-	if (rc < 0)
-		goto fail;
+		rc = mdio_clause45_wait_reset_mmds(efx,
+						   TENXPRESS_REQUIRED_DEVS);
+		if (rc < 0)
+			goto fail;
+
+		rc = mdio_clause45_check_mmds(efx, TENXPRESS_REQUIRED_DEVS, 0);
+		if (rc < 0)
+			goto fail;
+	}
 
 	rc = tenxpress_init(efx);
 	if (rc < 0)
 		goto fail;
 
+	if (efx->phy_type == PHY_TYPE_SFT9001B) {
+		rc = device_create_file(&efx->pci_dev->dev,
+					&dev_attr_phy_short_reach);
+		if (rc)
+			goto fail;
+	}
+
 	schedule_timeout_uninterruptible(HZ / 5); /* 200ms */
 
-	/* Let XGXS and SerDes out of reset and resets 10XPress */
+	/* Let XGXS and SerDes out of reset */
 	falcon_reset_xaui(efx);
 
 	return 0;
@@ -209,21 +348,24 @@ static int tenxpress_phy_init(struct efx_nic *efx)
 	return rc;
 }
 
+/* Perform a "special software reset" on the PHY. The caller is
+ * responsible for saving and restoring the PHY hardware registers
+ * properly, and masking/unmasking LASI */
 static int tenxpress_special_reset(struct efx_nic *efx)
 {
 	int rc, reg;
 
 	/* The XGMAC clock is driven from the SFC7101/SFT9001 312MHz clock, so
 	 * a special software reset can glitch the XGMAC sufficiently for stats
-	 * requests to fail. Since we don't ofen special_reset, just lock. */
+	 * requests to fail. Since we don't often special_reset, just lock. */
 	spin_lock(&efx->stats_lock);
 
 	/* Initiate reset */
 	reg = mdio_clause45_read(efx, efx->mii.phy_id,
-				 MDIO_MMD_PMAPMD, PMA_PMD_EXT_CTRL_REG);
+				 MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG);
 	reg |= (1 << PMA_PMD_EXT_SSR_LBN);
 	mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
-			    PMA_PMD_EXT_CTRL_REG, reg);
+			    PMA_PMD_XCONTROL_REG, reg);
 
 	mdelay(200);
 
@@ -238,12 +380,14 @@ static int tenxpress_special_reset(struct efx_nic *efx)
 	if (rc < 0)
 		goto unlock;
 
+	/* Wait for the XGXS state machine to churn */
+	mdelay(10);
 unlock:
 	spin_unlock(&efx->stats_lock);
 	return rc;
 }
 
-static void tenxpress_check_bad_lp(struct efx_nic *efx, bool link_ok)
+static void sfx7101_check_bad_lp(struct efx_nic *efx, bool link_ok)
 {
 	struct tenxpress_phy_data *pd = efx->phy_data;
 	int phy_id = efx->mii.phy_id;
@@ -288,63 +432,142 @@ static void tenxpress_check_bad_lp(struct efx_nic *efx, bool link_ok)
 	}
 }
 
-static bool tenxpress_link_ok(struct efx_nic *efx)
+static bool sfx7101_link_ok(struct efx_nic *efx)
 {
-	if (efx->loopback_mode == LOOPBACK_NONE)
-		return mdio_clause45_links_ok(efx, MDIO_MMDREG_DEVS_AN);
-	else
+	return mdio_clause45_links_ok(efx,
+				      MDIO_MMDREG_DEVS_PMAPMD |
+				      MDIO_MMDREG_DEVS_PCS |
+				      MDIO_MMDREG_DEVS_PHYXS);
+}
+
+static bool sft9001_link_ok(struct efx_nic *efx, struct ethtool_cmd *ecmd)
+{
+	int phy_id = efx->mii.phy_id;
+	u32 reg;
+
+	if (efx->loopback_mode == LOOPBACK_GPHY)
+		return true;
+	else if (efx_phy_mode_disabled(efx->phy_mode))
+		return false;
+	else if (efx->loopback_mode)
 		return mdio_clause45_links_ok(efx,
 					      MDIO_MMDREG_DEVS_PMAPMD |
 					      MDIO_MMDREG_DEVS_PCS |
 					      MDIO_MMDREG_DEVS_PHYXS);
+
+	/* We must use the same definition of link state as LASI,
+	 * otherwise we can miss a link state transition
+	 */
+	if (ecmd->speed == 10000) {
+		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PCS,
+					 PCS_10GBASET_STAT1);
+		return reg & (1 << PCS_10GBASET_BLKLK_LBN);
+	} else {
+		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT,
+					 C22EXT_STATUS_REG);
+		return reg & (1 << C22EXT_STATUS_LINK_LBN);
+	}
 }
 
-static void tenxpress_phyxs_loopback(struct efx_nic *efx)
+static void tenxpress_ext_loopback(struct efx_nic *efx)
 {
 	int phy_id = efx->mii.phy_id;
-	int ctrl1, ctrl2;
 
-	ctrl1 = ctrl2 = mdio_clause45_read(efx, phy_id, MDIO_MMD_PHYXS,
-					   PHYXS_TEST1);
-	if (efx->loopback_mode == LOOPBACK_PHYXS)
-		ctrl2 |= (1 << LOOPBACK_NEAR_LBN);
+	mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_PHYXS,
+			       PHYXS_TEST1, LOOPBACK_NEAR_LBN,
+			       efx->loopback_mode == LOOPBACK_PHYXS);
+	if (efx->phy_type != PHY_TYPE_SFX7101)
+		mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_C22EXT,
+				       GPHY_XCONTROL_REG,
+				       GPHY_LOOPBACK_NEAR_LBN,
+				       efx->loopback_mode == LOOPBACK_GPHY);
+}
+
+static void tenxpress_low_power(struct efx_nic *efx)
+{
+	int phy_id = efx->mii.phy_id;
+
+	if (efx->phy_type == PHY_TYPE_SFX7101)
+		mdio_clause45_set_mmds_lpower(
+			efx, !!(efx->phy_mode & PHY_MODE_LOW_POWER),
+			TENXPRESS_REQUIRED_DEVS);
 	else
-		ctrl2 &= ~(1 << LOOPBACK_NEAR_LBN);
-	if (ctrl1 != ctrl2)
-		mdio_clause45_write(efx, phy_id, MDIO_MMD_PHYXS,
-				    PHYXS_TEST1, ctrl2);
+		mdio_clause45_set_flag(
+			efx, phy_id, MDIO_MMD_PMAPMD,
+			PMA_PMD_XCONTROL_REG, PMA_PMD_EXT_LPOWER_LBN,
+			!!(efx->phy_mode & PHY_MODE_LOW_POWER));
 }
 
 static void tenxpress_phy_reconfigure(struct efx_nic *efx)
 {
 	struct tenxpress_phy_data *phy_data = efx->phy_data;
-	bool loop_change = LOOPBACK_OUT_OF(phy_data, efx,
-					   TENXPRESS_LOOPBACKS);
+	struct ethtool_cmd ecmd;
+	bool phy_mode_change, loop_reset, loop_toggle, loopback;
 
-	if (efx->phy_mode & PHY_MODE_SPECIAL) {
+	if (efx->phy_mode & (PHY_MODE_OFF | PHY_MODE_SPECIAL)) {
 		phy_data->phy_mode = efx->phy_mode;
 		return;
 	}
 
-	/* When coming out of transmit disable, coming out of low power
-	 * mode, or moving out of any PHY internal loopback mode,
-	 * perform a special software reset */
-	if ((efx->phy_mode == PHY_MODE_NORMAL &&
-	     phy_data->phy_mode != PHY_MODE_NORMAL) ||
-	    loop_change) {
-		tenxpress_special_reset(efx);
-		falcon_reset_xaui(efx);
+	tenxpress_low_power(efx);
+
+	phy_mode_change = (efx->phy_mode == PHY_MODE_NORMAL &&
+			   phy_data->phy_mode != PHY_MODE_NORMAL);
+	loopback = LOOPBACK_MASK(efx) & efx->phy_op->loopbacks;
+	loop_toggle = LOOPBACK_CHANGED(phy_data, efx, efx->phy_op->loopbacks);
+	loop_reset = (LOOPBACK_OUT_OF(phy_data, efx, efx->phy_op->loopbacks) ||
+		      LOOPBACK_CHANGED(phy_data, efx, 1 << LOOPBACK_GPHY));
+
+	if (loop_reset || loop_toggle || loopback || phy_mode_change) {
+		int rc;
+
+		efx->phy_op->get_settings(efx, &ecmd);
+
+		if (loop_reset || phy_mode_change) {
+			tenxpress_special_reset(efx);
+
+			/* Reset XAUI if we were in 10G, and are staying
+			 * in 10G. If we're moving into and out of 10G
+			 * then xaui will be reset anyway */
+			if (EFX_IS10G(efx))
+				falcon_reset_xaui(efx);
+		}
+
+		if (efx->phy_type != PHY_TYPE_SFX7101) {
+			/* Only change autoneg once, on coming out or
+			 * going into loopback */
+			if (loop_toggle)
+				ecmd.autoneg = !loopback;
+			if (loopback) {
+				ecmd.duplex = DUPLEX_FULL;
+				if (efx->loopback_mode == LOOPBACK_GPHY)
+					ecmd.speed = SPEED_1000;
+				else
+					ecmd.speed = SPEED_10000;
+			}
+		}
+
+		rc = efx->phy_op->set_settings(efx, &ecmd);
+		WARN_ON(rc);
 	}
 
 	mdio_clause45_transmit_disable(efx);
 	mdio_clause45_phy_reconfigure(efx);
-	tenxpress_phyxs_loopback(efx);
+	tenxpress_ext_loopback(efx);
 
 	phy_data->loopback_mode = efx->loopback_mode;
 	phy_data->phy_mode = efx->phy_mode;
-	efx->link_up = tenxpress_link_ok(efx);
-	efx->link_speed = 10000;
-	efx->link_fd = true;
+
+	if (efx->phy_type == PHY_TYPE_SFX7101) {
+		efx->link_speed = 10000;
+		efx->link_fd = true;
+		efx->link_up = sfx7101_link_ok(efx);
+	} else {
+		efx->phy_op->get_settings(efx, &ecmd);
+		efx->link_speed = ecmd.speed;
+		efx->link_fd = ecmd.duplex == DUPLEX_FULL;
+		efx->link_up = sft9001_link_ok(efx, &ecmd);
+	}
 	efx->link_fc = mdio_clause45_get_pause(efx);
 }
 
@@ -355,15 +578,23 @@ static void tenxpress_phy_poll(struct efx_nic *efx)
 	bool change = false, link_ok;
 	unsigned link_fc;
 
-	link_ok = tenxpress_link_ok(efx);
-	if (link_ok != efx->link_up) {
-		change = true;
+	if (efx->phy_type == PHY_TYPE_SFX7101) {
+		link_ok = sfx7101_link_ok(efx);
+		if (link_ok != efx->link_up) {
+			change = true;
+		} else {
+			link_fc = mdio_clause45_get_pause(efx);
+			if (link_fc != efx->link_fc)
+				change = true;
+		}
+		sfx7101_check_bad_lp(efx, link_ok);
 	} else {
-		link_fc = mdio_clause45_get_pause(efx);
-		if (link_fc != efx->link_fc)
+		u32 status = mdio_clause45_read(efx, efx->mii.phy_id,
+						MDIO_MMD_PMAPMD,
+						PMA_PMD_LASI_STATUS);
+		if (status & (1 << PMA_PMD_LS_ALARM_LBN))
 			change = true;
 	}
-	tenxpress_check_bad_lp(efx, link_ok);
 
 	if (change)
 		falcon_sim_phy_event(efx);
@@ -371,7 +602,8 @@ static void tenxpress_phy_poll(struct efx_nic *efx)
 	if (phy_data->phy_mode != PHY_MODE_NORMAL)
 		return;
 
-	if (atomic_read(&phy_data->bad_crc_count) > crc_error_reset_threshold) {
+	if (EFX_WORKAROUND_10750(efx) &&
+	    atomic_read(&phy_data->bad_crc_count) > crc_error_reset_threshold) {
 		EFX_ERR(efx, "Resetting XAUI due to too many CRC errors\n");
 		falcon_reset_xaui(efx);
 		atomic_set(&phy_data->bad_crc_count, 0);
@@ -382,15 +614,20 @@ static void tenxpress_phy_fini(struct efx_nic *efx)
 {
 	int reg;
 
-	/* Power down the LNPGA */
-	reg = (1 << PMA_PMD_LNPGA_POWERDOWN_LBN);
-	mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
-			    PMA_PMD_XCONTROL_REG, reg);
-
-	/* Waiting here ensures that the board fini, which can turn off the
-	 * power to the PHY, won't get run until the LNPGA powerdown has been
-	 * given long enough to complete. */
-	schedule_timeout_uninterruptible(LNPGA_PDOWN_WAIT); /* 200 ms */
+	if (efx->phy_type == PHY_TYPE_SFT9001B) {
+		device_remove_file(&efx->pci_dev->dev,
+				   &dev_attr_phy_short_reach);
+	} else {
+		/* Power down the LNPGA */
+		reg = (1 << PMA_PMD_LNPGA_POWERDOWN_LBN);
+		mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
+				    PMA_PMD_XCONTROL_REG, reg);
+
+		/* Waiting here ensures that the board fini, which can turn
+		 * off the power to the PHY, won't get run until the LNPGA
+		 * powerdown has been given long enough to complete. */
+		schedule_timeout_uninterruptible(LNPGA_PDOWN_WAIT); /* 200 ms */
+	}
 
 	kfree(efx->phy_data);
 	efx->phy_data = NULL;
@@ -426,14 +663,21 @@ static u32 tenxpress_get_xnp_lpa(struct efx_nic *efx)
 	u32 lpa = 0;
 	int reg;
 
+	if (efx->phy_type != PHY_TYPE_SFX7101) {
+		reg = mdio_clause45_read(efx, phy, MDIO_MMD_C22EXT,
+					 C22EXT_MSTSLV_REG);
+		if (reg & (1 << C22EXT_MSTSLV_1000_HD_LBN))
+			lpa |= ADVERTISED_1000baseT_Half;
+		if (reg & (1 << C22EXT_MSTSLV_1000_FD_LBN))
+			lpa |= ADVERTISED_1000baseT_Full;
+	}
 	reg = mdio_clause45_read(efx, phy, MDIO_MMD_AN, MDIO_AN_10GBT_STATUS);
 	if (reg & (1 << MDIO_AN_10GBT_STATUS_LP_10G_LBN))
 		lpa |= ADVERTISED_10000baseT_Full;
 	return lpa;
 }
 
-static void
-tenxpress_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
+static void sfx7101_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
 {
 	mdio_clause45_get_settings_ext(efx, ecmd, ADVERTISED_10000baseT_Full,
 				       tenxpress_get_xnp_lpa(efx));
@@ -441,7 +685,82 @@ tenxpress_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
 	ecmd->advertising |= ADVERTISED_10000baseT_Full;
 }
 
-struct efx_phy_operations falcon_tenxpress_phy_ops = {
+static void sft9001_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
+{
+	int phy_id = efx->mii.phy_id;
+	u32 xnp_adv = 0;
+	int reg;
+
+	reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
+				 PMA_PMD_SPEED_ENABLE_REG);
+	if (EFX_WORKAROUND_13204(efx) && (reg & (1 << PMA_PMD_100TX_ADV_LBN)))
+		xnp_adv |= ADVERTISED_100baseT_Full;
+	if (reg & (1 << PMA_PMD_1000T_ADV_LBN))
+		xnp_adv |= ADVERTISED_1000baseT_Full;
+	if (reg & (1 << PMA_PMD_10000T_ADV_LBN))
+		xnp_adv |= ADVERTISED_10000baseT_Full;
+
+	mdio_clause45_get_settings_ext(efx, ecmd, xnp_adv,
+				       tenxpress_get_xnp_lpa(efx));
+
+	ecmd->supported |= (SUPPORTED_100baseT_Half |
+			    SUPPORTED_100baseT_Full |
+			    SUPPORTED_1000baseT_Full);
+
+	/* Use the vendor defined C22ext register for duplex settings */
+	if (ecmd->speed != SPEED_10000 && !ecmd->autoneg) {
+		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT,
+					 GPHY_XCONTROL_REG);
+		ecmd->duplex = (reg & (1 << GPHY_DUPLEX_LBN) ?
+				DUPLEX_FULL : DUPLEX_HALF);
+	}
+}
+
+static int sft9001_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
+{
+	int phy_id = efx->mii.phy_id;
+	int rc;
+
+	rc = mdio_clause45_set_settings(efx, ecmd);
+	if (rc)
+		return rc;
+
+	if (ecmd->speed != SPEED_10000 && !ecmd->autoneg)
+		mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_C22EXT,
+				       GPHY_XCONTROL_REG, GPHY_DUPLEX_LBN,
+				       ecmd->duplex == DUPLEX_FULL);
+
+	return rc;
+}
+
+static bool sft9001_set_xnp_advertise(struct efx_nic *efx, u32 advertising)
+{
+	int phy = efx->mii.phy_id;
+	int reg = mdio_clause45_read(efx, phy, MDIO_MMD_PMAPMD,
+				     PMA_PMD_SPEED_ENABLE_REG);
+	bool enabled;
+
+	reg &= ~((1 << 2) | (1 << 3));
+	if (EFX_WORKAROUND_13204(efx) &&
+	    (advertising & ADVERTISED_100baseT_Full))
+		reg |= 1 << PMA_PMD_100TX_ADV_LBN;
+	if (advertising & ADVERTISED_1000baseT_Full)
+		reg |= 1 << PMA_PMD_1000T_ADV_LBN;
+	if (advertising & ADVERTISED_10000baseT_Full)
+		reg |= 1 << PMA_PMD_10000T_ADV_LBN;
+	mdio_clause45_write(efx, phy, MDIO_MMD_PMAPMD,
+			    PMA_PMD_SPEED_ENABLE_REG, reg);
+
+	enabled = (advertising &
+		   (ADVERTISED_1000baseT_Half |
+		    ADVERTISED_1000baseT_Full |
+		    ADVERTISED_10000baseT_Full));
+	if (EFX_WORKAROUND_13204(efx))
+		enabled |= (advertising & ADVERTISED_100baseT_Full);
+	return enabled;
+}
+
+struct efx_phy_operations falcon_sfx7101_phy_ops = {
 	.macs		  = EFX_XMAC,
 	.init             = tenxpress_phy_init,
 	.reconfigure      = tenxpress_phy_reconfigure,
@@ -449,8 +768,23 @@ struct efx_phy_operations falcon_tenxpress_phy_ops = {
 	.fini             = tenxpress_phy_fini,
 	.clear_interrupt  = efx_port_dummy_op_void,
 	.test             = tenxpress_phy_test,
-	.get_settings	  = tenxpress_get_settings,
+	.get_settings	  = sfx7101_get_settings,
 	.set_settings	  = mdio_clause45_set_settings,
 	.mmds             = TENXPRESS_REQUIRED_DEVS,
-	.loopbacks        = TENXPRESS_LOOPBACKS,
+	.loopbacks        = SFX7101_LOOPBACKS,
+};
+
+struct efx_phy_operations falcon_sft9001_phy_ops = {
+	.macs		  = EFX_GMAC | EFX_XMAC,
+	.init             = tenxpress_phy_init,
+	.reconfigure      = tenxpress_phy_reconfigure,
+	.poll             = tenxpress_phy_poll,
+	.fini             = tenxpress_phy_fini,
+	.clear_interrupt  = efx_port_dummy_op_void,
+	.test             = tenxpress_phy_test,
+	.get_settings	  = sft9001_get_settings,
+	.set_settings	  = sft9001_set_settings,
+	.set_xnp_advertise = sft9001_set_xnp_advertise,
+	.mmds             = TENXPRESS_REQUIRED_DEVS,
+	.loopbacks        = SFT9001_LOOPBACKS,
 };