diff options
Diffstat (limited to 'drivers/net/s2io.c')
-rw-r--r-- | drivers/net/s2io.c | 34 |
1 files changed, 17 insertions, 17 deletions
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 182643ff81e..2ee2a2b4b27 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -1611,7 +1611,7 @@ static int init_nic(struct s2io_nic *nic) val64 = RTI_DATA2_MEM_RX_UFC_A(0x1) | RTI_DATA2_MEM_RX_UFC_B(0x2) ; - if (nic->intr_type == MSI_X) + if (nic->config.intr_type == MSI_X) val64 |= (RTI_DATA2_MEM_RX_UFC_C(0x20) | \ RTI_DATA2_MEM_RX_UFC_D(0x40)); else @@ -1749,7 +1749,7 @@ static int init_nic(struct s2io_nic *nic) static int s2io_link_fault_indication(struct s2io_nic *nic) { - if (nic->intr_type != INTA) + if (nic->config.intr_type != INTA) return MAC_RMAC_ERR_TIMER; if (nic->device_type == XFRAME_II_DEVICE) return LINK_UP_DOWN_INTERRUPT; @@ -3549,7 +3549,7 @@ static int s2io_set_swapper(struct s2io_nic * sp) SWAPPER_CTRL_RXF_W_FE | SWAPPER_CTRL_XMSI_FE | SWAPPER_CTRL_STATS_FE | SWAPPER_CTRL_STATS_SE); - if (sp->intr_type == INTA) + if (sp->config.intr_type == INTA) val64 |= SWAPPER_CTRL_XMSI_SE; writeq(val64, &bar0->swapper_ctrl); #else @@ -3572,7 +3572,7 @@ static int s2io_set_swapper(struct s2io_nic * sp) SWAPPER_CTRL_RXF_W_FE | SWAPPER_CTRL_XMSI_FE | SWAPPER_CTRL_STATS_FE | SWAPPER_CTRL_STATS_SE); - if (sp->intr_type == INTA) + if (sp->config.intr_type == INTA) val64 |= SWAPPER_CTRL_XMSI_SE; writeq(val64, &bar0->swapper_ctrl); #endif @@ -3848,7 +3848,7 @@ static int s2io_open(struct net_device *dev) napi_enable(&sp->napi); - if (sp->intr_type == MSI_X) { + if (sp->config.intr_type == MSI_X) { int ret = s2io_enable_msi_x(sp); if (!ret) { @@ -3880,12 +3880,12 @@ static int s2io_open(struct net_device *dev) DBG_PRINT(ERR_DBG, "%s: MSI-X requested but failed to enable\n", dev->name); - sp->intr_type = INTA; + sp->config.intr_type = INTA; } } /* NAPI doesn't work well with MSI(X) */ - if (sp->intr_type != INTA) { + if (sp->config.intr_type != INTA) { if(sp->config.napi) sp->config.napi = 0; } @@ -3910,7 +3910,7 @@ static int s2io_open(struct net_device *dev) hw_init_failed: napi_disable(&sp->napi); - if (sp->intr_type == MSI_X) { + if (sp->config.intr_type == MSI_X) { if (sp->entries) { kfree(sp->entries); sp->mac_control.stats_info->sw_stat.mem_freed @@ -6697,18 +6697,18 @@ static int s2io_add_isr(struct s2io_nic * sp) struct net_device *dev = sp->dev; int err = 0; - if (sp->intr_type == MSI_X) + if (sp->config.intr_type == MSI_X) ret = s2io_enable_msi_x(sp); if (ret) { DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n", dev->name); - sp->intr_type = INTA; + sp->config.intr_type = INTA; } /* Store the values of the MSIX table in the struct s2io_nic structure */ store_xmsi_data(sp); /* After proper initialization of H/W, register ISR */ - if (sp->intr_type == MSI_X) { + if (sp->config.intr_type == MSI_X) { int i, msix_tx_cnt=0,msix_rx_cnt=0; for (i=1; (sp->s2io_entries[i].in_use == MSIX_FLG); i++) { @@ -6760,7 +6760,7 @@ static int s2io_add_isr(struct s2io_nic * sp) printk("MSI-X-TX %d entries enabled\n",msix_tx_cnt); printk("MSI-X-RX %d entries enabled\n",msix_rx_cnt); } - if (sp->intr_type == INTA) { + if (sp->config.intr_type == INTA) { err = request_irq((int) sp->pdev->irq, s2io_isr, IRQF_SHARED, sp->name, dev); if (err) { @@ -6777,7 +6777,7 @@ static void s2io_rem_isr(struct s2io_nic * sp) struct net_device *dev = sp->dev; struct swStat *stats = &sp->mac_control.stats_info->sw_stat; - if (sp->intr_type == MSI_X) { + if (sp->config.intr_type == MSI_X) { int i; u16 msi_control; @@ -6950,7 +6950,7 @@ static int s2io_card_up(struct s2io_nic * sp) /* Add interrupt service routine */ if (s2io_add_isr(sp) != 0) { - if (sp->intr_type == MSI_X) + if (sp->config.intr_type == MSI_X) s2io_rem_isr(sp); s2io_reset(sp); free_rx_buffers(sp); @@ -6964,7 +6964,7 @@ static int s2io_card_up(struct s2io_nic * sp) /* Enable select interrupts */ en_dis_err_alarms(sp, ENA_ALL_INTRS, ENABLE_INTRS); - if (sp->intr_type != INTA) + if (sp->config.intr_type != INTA) en_dis_able_nic_intrs(sp, ENA_ALL_INTRS, DISABLE_INTRS); else { interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR; @@ -7491,7 +7491,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) if (rx_ring_mode == 2) sp->rxd_mode = RXD_MODE_3B; - sp->intr_type = dev_intr_type; + sp->config.intr_type = dev_intr_type; if ((pdev->device == PCI_DEVICE_ID_HERC_WIN) || (pdev->device == PCI_DEVICE_ID_HERC_UNI)) @@ -7770,7 +7770,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) if (napi) DBG_PRINT(ERR_DBG, "%s: NAPI enabled\n", dev->name); - switch(sp->intr_type) { + switch(sp->config.intr_type) { case INTA: DBG_PRINT(ERR_DBG, "%s: Interrupt type INTA\n", dev->name); break; |