diff options
Diffstat (limited to 'drivers/net/qlge/qlge_mpi.c')
| -rw-r--r-- | drivers/net/qlge/qlge_mpi.c | 130 |
1 files changed, 114 insertions, 16 deletions
diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c index 6685bd97da9..aec05f26610 100644 --- a/drivers/net/qlge/qlge_mpi.c +++ b/drivers/net/qlge/qlge_mpi.c @@ -470,9 +470,9 @@ end: */ static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp) { - int status, count; + int status; + unsigned long count; - mutex_lock(&qdev->mpi_mutex); /* Begin polled mode for MPI */ ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16)); @@ -492,14 +492,14 @@ static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp) /* Wait for the command to complete. We loop * here because some AEN might arrive while * we're waiting for the mailbox command to - * complete. If more than 5 arrive then we can + * complete. If more than 5 seconds expire we can * assume something is wrong. */ - count = 5; + count = jiffies + HZ * MAILBOX_TIMEOUT; do { /* Wait for the interrupt to come in. */ status = ql_wait_mbx_cmd_cmplt(qdev); if (status) - goto end; + continue; /* Process the event. If it's an AEN, it * will be handled in-line or a worker @@ -518,15 +518,15 @@ static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp) MB_CMD_STS_GOOD) || ((mbcp->mbox_out[0] & 0x0000f000) == MB_CMD_STS_INTRMDT)) - break; - } while (--count); + goto done; + } while (time_before(jiffies, count)); - if (!count) { - QPRINTK(qdev, DRV, ERR, - "Timed out waiting for mailbox complete.\n"); - status = -ETIMEDOUT; - goto end; - } + QPRINTK(qdev, DRV, ERR, + "Timed out waiting for mailbox complete.\n"); + status = -ETIMEDOUT; + goto end; + +done: /* Now we can clear the interrupt condition * and look at our status. @@ -541,7 +541,6 @@ static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp) status = -EIO; } end: - mutex_unlock(&qdev->mpi_mutex); /* End polled mode for MPI */ ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16) | INTR_MASK_PI); return status; @@ -770,13 +769,104 @@ static int ql_idc_wait(struct ql_adapter *qdev) return status; } +int ql_mb_set_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 control) +{ + struct mbox_params mbc; + struct mbox_params *mbcp = &mbc; + int status; + + memset(mbcp, 0, sizeof(struct mbox_params)); + + mbcp->in_count = 1; + mbcp->out_count = 2; + + mbcp->mbox_in[0] = MB_CMD_SET_MGMNT_TFK_CTL; + mbcp->mbox_in[1] = control; + + status = ql_mailbox_command(qdev, mbcp); + if (status) + return status; + + if (mbcp->mbox_out[0] == MB_CMD_STS_GOOD) + return status; + + if (mbcp->mbox_out[0] == MB_CMD_STS_INVLD_CMD) { + QPRINTK(qdev, DRV, ERR, + "Command not supported by firmware.\n"); + status = -EINVAL; + } else if (mbcp->mbox_out[0] == MB_CMD_STS_ERR) { + /* This indicates that the firmware is + * already in the state we are trying to + * change it to. + */ + QPRINTK(qdev, DRV, ERR, + "Command parameters make no change.\n"); + } + return status; +} + +/* Returns a negative error code or the mailbox command status. */ +static int ql_mb_get_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 *control) +{ + struct mbox_params mbc; + struct mbox_params *mbcp = &mbc; + int status; + + memset(mbcp, 0, sizeof(struct mbox_params)); + *control = 0; + + mbcp->in_count = 1; + mbcp->out_count = 1; + + mbcp->mbox_in[0] = MB_CMD_GET_MGMNT_TFK_CTL; + + status = ql_mailbox_command(qdev, mbcp); + if (status) + return status; + + if (mbcp->mbox_out[0] == MB_CMD_STS_GOOD) { + *control = mbcp->mbox_in[1]; + return status; + } + + if (mbcp->mbox_out[0] == MB_CMD_STS_INVLD_CMD) { + QPRINTK(qdev, DRV, ERR, + "Command not supported by firmware.\n"); + status = -EINVAL; + } else if (mbcp->mbox_out[0] == MB_CMD_STS_ERR) { + QPRINTK(qdev, DRV, ERR, + "Failed to get MPI traffic control.\n"); + status = -EIO; + } + return status; +} + +int ql_wait_fifo_empty(struct ql_adapter *qdev) +{ + int count = 5; + u32 mgmnt_fifo_empty; + u32 nic_fifo_empty; + + do { + nic_fifo_empty = ql_read32(qdev, STS) & STS_NFE; + ql_mb_get_mgmnt_traffic_ctl(qdev, &mgmnt_fifo_empty); + mgmnt_fifo_empty &= MB_GET_MPI_TFK_FIFO_EMPTY; + if (nic_fifo_empty && mgmnt_fifo_empty) + return 0; + msleep(100); + } while (count-- > 0); + return -ETIMEDOUT; +} + /* API called in work thread context to set new TX/RX * maximum frame size values to match MTU. */ static int ql_set_port_cfg(struct ql_adapter *qdev) { int status; + rtnl_lock(); status = ql_mb_set_port_cfg(qdev); + rtnl_unlock(); if (status) return status; status = ql_idc_wait(qdev); @@ -797,7 +887,9 @@ void ql_mpi_port_cfg_work(struct work_struct *work) container_of(work, struct ql_adapter, mpi_port_cfg_work.work); int status; + rtnl_lock(); status = ql_mb_get_port_cfg(qdev); + rtnl_unlock(); if (status) { QPRINTK(qdev, DRV, ERR, "Bug: Failed to get port config data.\n"); @@ -855,7 +947,9 @@ void ql_mpi_idc_work(struct work_struct *work) * needs to be set. * */ set_bit(QL_CAM_RT_SET, &qdev->flags); + rtnl_lock(); status = ql_mb_idc_ack(qdev); + rtnl_unlock(); if (status) { QPRINTK(qdev, DRV, ERR, "Bug: No pending IDC!\n"); @@ -871,7 +965,9 @@ void ql_mpi_work(struct work_struct *work) struct mbox_params *mbcp = &mbc; int err = 0; - mutex_lock(&qdev->mpi_mutex); + rtnl_lock(); + /* Begin polled mode for MPI */ + ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16)); while (ql_read32(qdev, STS) & STS_PI) { memset(mbcp, 0, sizeof(struct mbox_params)); @@ -884,7 +980,9 @@ void ql_mpi_work(struct work_struct *work) break; } - mutex_unlock(&qdev->mpi_mutex); + /* End polled mode for MPI */ + ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16) | INTR_MASK_PI); + rtnl_unlock(); ql_enable_completion_interrupt(qdev, 0); } |