diff options
Diffstat (limited to 'drivers/net/qlge/qlge_main.c')
| -rw-r--r-- | drivers/net/qlge/qlge_main.c | 3956 |
1 files changed, 3956 insertions, 0 deletions
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c new file mode 100644 index 00000000000..3af822b6226 --- /dev/null +++ b/drivers/net/qlge/qlge_main.c @@ -0,0 +1,3956 @@ +/* + * QLogic qlge NIC HBA Driver + * Copyright (c) 2003-2008 QLogic Corporation + * See LICENSE.qlge for copyright and licensing details. + * Author: Linux qlge network device driver by + * Ron Mercer <ron.mercer@qlogic.com> + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/list.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <linux/pagemap.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/dmapool.h> +#include <linux/mempool.h> +#include <linux/spinlock.h> +#include <linux/kthread.h> +#include <linux/interrupt.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/in.h> +#include <linux/ip.h> +#include <linux/ipv6.h> +#include <net/ipv6.h> +#include <linux/tcp.h> +#include <linux/udp.h> +#include <linux/if_arp.h> +#include <linux/if_ether.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/skbuff.h> +#include <linux/rtnetlink.h> +#include <linux/if_vlan.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/mm.h> +#include <linux/vmalloc.h> + +#include "qlge.h" + +char qlge_driver_name[] = DRV_NAME; +const char qlge_driver_version[] = DRV_VERSION; + +MODULE_AUTHOR("Ron Mercer <ron.mercer@qlogic.com>"); +MODULE_DESCRIPTION(DRV_STRING " "); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +static const u32 default_msg = + NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | +/* NETIF_MSG_TIMER | */ + NETIF_MSG_IFDOWN | + NETIF_MSG_IFUP | + NETIF_MSG_RX_ERR | + NETIF_MSG_TX_ERR | + NETIF_MSG_TX_QUEUED | + NETIF_MSG_INTR | NETIF_MSG_TX_DONE | NETIF_MSG_RX_STATUS | +/* NETIF_MSG_PKTDATA | */ + NETIF_MSG_HW | NETIF_MSG_WOL | 0; + +static int debug = 0x00007fff; /* defaults above */ +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); + +#define MSIX_IRQ 0 +#define MSI_IRQ 1 +#define LEG_IRQ 2 +static int irq_type = MSIX_IRQ; +module_param(irq_type, int, MSIX_IRQ); +MODULE_PARM_DESC(irq_type, "0 = MSI-X, 1 = MSI, 2 = Legacy."); + +static struct pci_device_id qlge_pci_tbl[] __devinitdata = { + {PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, QLGE_DEVICE_ID)}, + {PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, QLGE_DEVICE_ID1)}, + /* required last entry */ + {0,} +}; + +MODULE_DEVICE_TABLE(pci, qlge_pci_tbl); + +/* This hardware semaphore causes exclusive access to + * resources shared between the NIC driver, MPI firmware, + * FCOE firmware and the FC driver. + */ +static int ql_sem_trylock(struct ql_adapter *qdev, u32 sem_mask) +{ + u32 sem_bits = 0; + + switch (sem_mask) { + case SEM_XGMAC0_MASK: + sem_bits = SEM_SET << SEM_XGMAC0_SHIFT; + break; + case SEM_XGMAC1_MASK: + sem_bits = SEM_SET << SEM_XGMAC1_SHIFT; + break; + case SEM_ICB_MASK: + sem_bits = SEM_SET << SEM_ICB_SHIFT; + break; + case SEM_MAC_ADDR_MASK: + sem_bits = SEM_SET << SEM_MAC_ADDR_SHIFT; + break; + case SEM_FLASH_MASK: + sem_bits = SEM_SET << SEM_FLASH_SHIFT; + break; + case SEM_PROBE_MASK: + sem_bits = SEM_SET << SEM_PROBE_SHIFT; + break; + case SEM_RT_IDX_MASK: + sem_bits = SEM_SET << SEM_RT_IDX_SHIFT; + break; + case SEM_PROC_REG_MASK: + sem_bits = SEM_SET << SEM_PROC_REG_SHIFT; + break; + default: + QPRINTK(qdev, PROBE, ALERT, "Bad Semaphore mask!.\n"); + return -EINVAL; + } + + ql_write32(qdev, SEM, sem_bits | sem_mask); + return !(ql_read32(qdev, SEM) & sem_bits); +} + +int ql_sem_spinlock(struct ql_adapter *qdev, u32 sem_mask) +{ + unsigned int seconds = 3; + do { + if (!ql_sem_trylock(qdev, sem_mask)) + return 0; + ssleep(1); + } while (--seconds); + return -ETIMEDOUT; +} + +void ql_sem_unlock(struct ql_adapter *qdev, u32 sem_mask) +{ + ql_write32(qdev, SEM, sem_mask); + ql_read32(qdev, SEM); /* flush */ +} + +/* This function waits for a specific bit to come ready + * in a given register. It is used mostly by the initialize + * process, but is also used in kernel thread API such as + * netdev->set_multi, netdev->set_mac_address, netdev->vlan_rx_add_vid. + */ +int ql_wait_reg_rdy(struct ql_adapter *qdev, u32 reg, u32 bit, u32 err_bit) +{ + u32 temp; + int count = UDELAY_COUNT; + + while (count) { + temp = ql_read32(qdev, reg); + + /* check for errors */ + if (temp & err_bit) { + QPRINTK(qdev, PROBE, ALERT, + "register 0x%.08x access error, value = 0x%.08x!.\n", + reg, temp); + return -EIO; + } else if (temp & bit) + return 0; + udelay(UDELAY_DELAY); + count--; + } + QPRINTK(qdev, PROBE, ALERT, + "Timed out waiting for reg %x to come ready.\n", reg); + return -ETIMEDOUT; +} + +/* The CFG register is used to download TX and RX control blocks + * to the chip. This function waits for an operation to complete. + */ +static int ql_wait_cfg(struct ql_adapter *qdev, u32 bit) +{ + int count = UDELAY_COUNT; + u32 temp; + + while (count) { + temp = ql_read32(qdev, CFG); + if (temp & CFG_LE) + return -EIO; + if (!(temp & bit)) + return 0; + udelay(UDELAY_DELAY); + count--; + } + return -ETIMEDOUT; +} + + +/* Used to issue init control blocks to hw. Maps control block, + * sets address, triggers download, waits for completion. + */ +int ql_write_cfg(struct ql_adapter *qdev, void *ptr, int size, u32 bit, + u16 q_id) +{ + u64 map; + int status = 0; + int direction; + u32 mask; + u32 value; + + direction = + (bit & (CFG_LRQ | CFG_LR | CFG_LCQ)) ? PCI_DMA_TODEVICE : + PCI_DMA_FROMDEVICE; + + map = pci_map_single(qdev->pdev, ptr, size, direction); + if (pci_dma_mapping_error(qdev->pdev, map)) { + QPRINTK(qdev, IFUP, ERR, "Couldn't map DMA area.\n"); + return -ENOMEM; + } + + status = ql_wait_cfg(qdev, bit); + if (status) { + QPRINTK(qdev, IFUP, ERR, + "Timed out waiting for CFG to come ready.\n"); + goto exit; + } + + status = ql_sem_spinlock(qdev, SEM_ICB_MASK); + if (status) + goto exit; + ql_write32(qdev, ICB_L, (u32) map); + ql_write32(qdev, ICB_H, (u32) (map >> 32)); + ql_sem_unlock(qdev, SEM_ICB_MASK); /* does flush too */ + + mask = CFG_Q_MASK | (bit << 16); + value = bit | (q_id << CFG_Q_SHIFT); + ql_write32(qdev, CFG, (mask | value)); + + /* + * Wait for the bit to clear after signaling hw. + */ + status = ql_wait_cfg(qdev, bit); +exit: + pci_unmap_single(qdev->pdev, map, size, direction); + return status; +} + +/* Get a specific MAC address from the CAM. Used for debug and reg dump. */ +int ql_get_mac_addr_reg(struct ql_adapter *qdev, u32 type, u16 index, + u32 *value) +{ + u32 offset = 0; + int status; + + status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK); + if (status) + return status; + switch (type) { + case MAC_ADDR_TYPE_MULTI_MAC: + case MAC_ADDR_TYPE_CAM_MAC: + { + status = + ql_wait_reg_rdy(qdev, + MAC_ADDR_IDX, MAC_ADDR_MW, MAC_ADDR_E); + if (status) + goto exit; + ql_write32(qdev, MAC_ADDR_IDX, (offset++) | /* offset */ + (index << MAC_ADDR_IDX_SHIFT) | /* index */ + MAC_ADDR_ADR | MAC_ADDR_RS | type); /* type */ + status = + ql_wait_reg_rdy(qdev, + MAC_ADDR_IDX, MAC_ADDR_MR, MAC_ADDR_E); + if (status) + goto exit; + *value++ = ql_read32(qdev, MAC_ADDR_DATA); + status = + ql_wait_reg_rdy(qdev, + MAC_ADDR_IDX, MAC_ADDR_MW, MAC_ADDR_E); + if (status) + goto exit; + ql_write32(qdev, MAC_ADDR_IDX, (offset++) | /* offset */ + (index << MAC_ADDR_IDX_SHIFT) | /* index */ + MAC_ADDR_ADR | MAC_ADDR_RS | type); /* type */ + status = + ql_wait_reg_rdy(qdev, + MAC_ADDR_IDX, MAC_ADDR_MR, MAC_ADDR_E); + if (status) + goto exit; + *value++ = ql_read32(qdev, MAC_ADDR_DATA); + if (type == MAC_ADDR_TYPE_CAM_MAC) { + status = + ql_wait_reg_rdy(qdev, + MAC_ADDR_IDX, MAC_ADDR_MW, MAC_ADDR_E); + if (status) + goto exit; + ql_write32(qdev, MAC_ADDR_IDX, (offset++) | /* offset */ + (index << MAC_ADDR_IDX_SHIFT) | /* index */ + MAC_ADDR_ADR | MAC_ADDR_RS | type); /* type */ + status = + ql_wait_reg_rdy(qdev, MAC_ADDR_IDX, + MAC_ADDR_MR, MAC_ADDR_E); + if (status) + goto exit; + *value++ = ql_read32(qdev, MAC_ADDR_DATA); + } + break; + } + case MAC_ADDR_TYPE_VLAN: + case MAC_ADDR_TYPE_MULTI_FLTR: + default: + QPRINTK(qdev, IFUP, CRIT, + "Address type %d not yet supported.\n", type); + status = -EPERM; + } +exit: + ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK); + return status; +} + +/* Set up a MAC, multicast or VLAN address for the + * inbound frame matching. + */ +static int ql_set_mac_addr_reg(struct ql_adapter *qdev, u8 *addr, u32 type, + u16 index) +{ + u32 offset = 0; + int status = 0; + + status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK); + if (status) + return status; + switch (type) { + case MAC_ADDR_TYPE_MULTI_MAC: + case MAC_ADDR_TYPE_CAM_MAC: + { + u32 cam_output; + u32 upper = (addr[0] << 8) | addr[1]; + u32 lower = + (addr[2] << 24) | (addr[3] << 16) | (addr[4] << 8) | + (addr[5]); + + QPRINTK(qdev, IFUP, INFO, + "Adding %s address %02x:%02x:%02x:%02x:%02x:%02x" + " at index %d in the CAM.\n", + ((type == + MAC_ADDR_TYPE_MULTI_MAC) ? "MULTICAST" : + "UNICAST"), addr[0], addr[1], addr[2], addr[3], + addr[4], addr[5], index); + + status = + ql_wait_reg_rdy(qdev, + MAC_ADDR_IDX, MAC_ADDR_MW, MAC_ADDR_E); + if (status) + goto exit; + ql_write32(qdev, MAC_ADDR_IDX, (offset++) | /* offset */ + (index << MAC_ADDR_IDX_SHIFT) | /* index */ + type); /* type */ + ql_write32(qdev, MAC_ADDR_DATA, lower); + status = + ql_wait_reg_rdy(qdev, + MAC_ADDR_IDX, MAC_ADDR_MW, MAC_ADDR_E); + if (status) + goto exit; + ql_write32(qdev, MAC_ADDR_IDX, (offset++) | /* offset */ + (index << MAC_ADDR_IDX_SHIFT) | /* index */ + type); /* type */ + ql_write32(qdev, MAC_ADDR_DATA, upper); + status = + ql_wait_reg_rdy(qdev, + MAC_ADDR_IDX, MAC_ADDR_MW, MAC_ADDR_E); + if (status) + goto exit; + ql_write32(qdev, MAC_ADDR_IDX, (offset) | /* offset */ + (index << MAC_ADDR_IDX_SHIFT) | /* index */ + type); /* type */ + /* This field should also include the queue id + and possibly the function id. Right now we hardcode + the route field to NIC core. + */ + if (type == MAC_ADDR_TYPE_CAM_MAC) { + cam_output = (CAM_OUT_ROUTE_NIC | + (qdev-> + func << CAM_OUT_FUNC_SHIFT) | + (qdev-> + rss_ring_first_cq_id << + CAM_OUT_CQ_ID_SHIFT)); + if (qdev->vlgrp) + cam_output |= CAM_OUT_RV; + /* route to NIC core */ + ql_write32(qdev, MAC_ADDR_DATA, cam_output); + } + break; + } + case MAC_ADDR_TYPE_VLAN: + { + u32 enable_bit = *((u32 *) &addr[0]); + /* For VLAN, the addr actually holds a bit that + * either enables or disables the vlan id we are + * addressing. It's either MAC_ADDR_E on or off. + * That's bit-27 we're talking about. + */ + QPRINTK(qdev, IFUP, INFO, "%s VLAN ID %d %s the CAM.\n", + (enable_bit ? "Adding" : "Removing"), + index, (enable_bit ? "to" : "from")); + + status = + ql_wait_reg_rdy(qdev, + MAC_ADDR_IDX, MAC_ADDR_MW, MAC_ADDR_E); + if (status) + goto exit; + ql_write32(qdev, MAC_ADDR_IDX, offset | /* offset */ + (index << MAC_ADDR_IDX_SHIFT) | /* index */ + type | /* type */ + enable_bit); /* enable/disable */ + break; + } + case MAC_ADDR_TYPE_MULTI_FLTR: + default: + QPRINTK(qdev, IFUP, CRIT, + "Address type %d not yet supported.\n", type); + status = -EPERM; + } +exit: + ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK); + return status; +} + +/* Get a specific frame routing value from the CAM. + * Used for debug and reg dump. + */ +int ql_get_routing_reg(struct ql_adapter *qdev, u32 index, u32 *value) +{ + int status = 0; + + status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK); + if (status) + goto exit; + + status = ql_wait_reg_rdy(qdev, RT_IDX, RT_IDX_MW, RT_IDX_E); + if (status) + goto exit; + + ql_write32(qdev, RT_IDX, + RT_IDX_TYPE_NICQ | RT_IDX_RS | (index << RT_IDX_IDX_SHIFT)); + status = ql_wait_reg_rdy(qdev, RT_IDX, RT_IDX_MR, RT_IDX_E); + if (status) + goto exit; + *value = ql_read32(qdev, RT_DATA); +exit: + ql_sem_unlock(qdev, SEM_RT_IDX_MASK); + return status; +} + +/* The NIC function for this chip has 16 routing indexes. Each one can be used + * to route different frame types to various inbound queues. We send broadcast/ + * multicast/error frames to the default queue for slow handling, + * and CAM hit/RSS frames to the fast handling queues. + */ +static int ql_set_routing_reg(struct ql_adapter *qdev, u32 index, u32 mask, + int enable) +{ + int status; + u32 value = 0; + + status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK); + if (status) + return status; + + QPRINTK(qdev, IFUP, DEBUG, + "%s %s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s mask %s the routing reg.\n", + (enable ? "Adding" : "Removing"), + ((index == RT_IDX_ALL_ERR_SLOT) ? "MAC ERROR/ALL ERROR" : ""), + ((index == RT_IDX_IP_CSUM_ERR_SLOT) ? "IP CSUM ERROR" : ""), + ((index == + RT_IDX_TCP_UDP_CSUM_ERR_SLOT) ? "TCP/UDP CSUM ERROR" : ""), + ((index == RT_IDX_BCAST_SLOT) ? "BROADCAST" : ""), + ((index == RT_IDX_MCAST_MATCH_SLOT) ? "MULTICAST MATCH" : ""), + ((index == RT_IDX_ALLMULTI_SLOT) ? "ALL MULTICAST MATCH" : ""), + ((index == RT_IDX_UNUSED6_SLOT) ? "UNUSED6" : ""), + ((index == RT_IDX_UNUSED7_SLOT) ? "UNUSED7" : ""), + ((index == RT_IDX_RSS_MATCH_SLOT) ? "RSS ALL/IPV4 MATCH" : ""), + ((index == RT_IDX_RSS_IPV6_SLOT) ? "RSS IPV6" : ""), + ((index == RT_IDX_RSS_TCP4_SLOT) ? "RSS TCP4" : ""), + ((index == RT_IDX_RSS_TCP6_SLOT) ? "RSS TCP6" : ""), + ((index == RT_IDX_CAM_HIT_SLOT) ? "CAM HIT" : ""), + ((index == RT_IDX_UNUSED013) ? "UNUSED13" : ""), + ((index == RT_IDX_UNUSED014) ? "UNUSED14" : ""), + ((index == RT_IDX_PROMISCUOUS_SLOT) ? "PROMISCUOUS" : ""), + (enable ? "to" : "from")); + + switch (mask) { + case RT_IDX_CAM_HIT: + { + value = RT_IDX_DST_CAM_Q | /* dest */ + RT_IDX_TYPE_NICQ | /* type */ + (RT_IDX_CAM_HIT_SLOT << RT_IDX_IDX_SHIFT);/* index */ + break; + } + case RT_IDX_VALID: /* Promiscuous Mode frames. */ + { + value = RT_IDX_DST_DFLT_Q | /* dest */ + RT_IDX_TYPE_NICQ | /* type */ + (RT_IDX_PROMISCUOUS_SLOT << RT_IDX_IDX_SHIFT);/* index */ + break; + } + case RT_IDX_ERR: /* Pass up MAC,IP,TCP/UDP error frames. */ + { + value = RT_IDX_DST_DFLT_Q | /* dest */ + RT_IDX_TYPE_NICQ | /* type */ + (RT_IDX_ALL_ERR_SLOT << RT_IDX_IDX_SHIFT);/* index */ + break; + } + case RT_IDX_BCAST: /* Pass up Broadcast frames to default Q. */ + { + value = RT_IDX_DST_DFLT_Q | /* dest */ + RT_IDX_TYPE_NICQ | /* type */ + (RT_IDX_BCAST_SLOT << RT_IDX_IDX_SHIFT);/* index */ + break; + } + case RT_IDX_MCAST: /* Pass up All Multicast frames. */ + { + value = RT_IDX_DST_CAM_Q | /* dest */ + RT_IDX_TYPE_NICQ | /* type */ + (RT_IDX_ALLMULTI_SLOT << RT_IDX_IDX_SHIFT);/* index */ + break; + } + case RT_IDX_MCAST_MATCH: /* Pass up matched Multicast frames. */ + { + value = RT_IDX_DST_CAM_Q | /* dest */ + RT_IDX_TYPE_NICQ | /* type */ + (RT_IDX_MCAST_MATCH_SLOT << RT_IDX_IDX_SHIFT);/* index */ + break; + } + case RT_IDX_RSS_MATCH: /* Pass up matched RSS frames. */ + { + value = RT_IDX_DST_RSS | /* dest */ + RT_IDX_TYPE_NICQ | /* type */ + (RT_IDX_RSS_MATCH_SLOT << RT_IDX_IDX_SHIFT);/* index */ + break; + } + case 0: /* Clear the E-bit on an entry. */ + { + value = RT_IDX_DST_DFLT_Q | /* dest */ + RT_IDX_TYPE_NICQ | /* type */ + (index << RT_IDX_IDX_SHIFT);/* index */ + break; + } + default: + QPRINTK(qdev, IFUP, ERR, "Mask type %d not yet supported.\n", + mask); + status = -EPERM; + goto exit; + } + + if (value) { + status = ql_wait_reg_rdy(qdev, RT_IDX, RT_IDX_MW, 0); + if (status) + goto exit; + value |= (enable ? RT_IDX_E : 0); + ql_write32(qdev, RT_IDX, value); + ql_write32(qdev, RT_DATA, enable ? mask : 0); + } +exit: + ql_sem_unlock(qdev, SEM_RT_IDX_MASK); + return status; +} + +static void ql_enable_interrupts(struct ql_adapter *qdev) +{ + ql_write32(qdev, INTR_EN, (INTR_EN_EI << 16) | INTR_EN_EI); +} + +static void ql_disable_interrupts(struct ql_adapter *qdev) +{ + ql_write32(qdev, INTR_EN, (INTR_EN_EI << 16)); +} + +/* If we're running with multiple MSI-X vectors then we enable on the fly. + * Otherwise, we may have multiple outstanding workers and don't want to + * enable until the last one finishes. In this case, the irq_cnt gets + * incremented everytime we queue a worker and decremented everytime + * a worker finishes. Once it hits zero we enable the interrupt. + */ +void ql_enable_completion_interrupt(struct ql_adapter *qdev, u32 intr) +{ + if (likely(test_bit(QL_MSIX_ENABLED, &qdev->flags))) + ql_write32(qdev, INTR_EN, + qdev->intr_context[intr].intr_en_mask); + else { + if (qdev->legacy_check) + spin_lock(&qdev->legacy_lock); + if (atomic_dec_and_test(&qdev->intr_context[intr].irq_cnt)) { + QPRINTK(qdev, INTR, ERR, "Enabling interrupt %d.\n", + intr); + ql_write32(qdev, INTR_EN, + qdev->intr_context[intr].intr_en_mask); + } else { + QPRINTK(qdev, INTR, ERR, + "Skip enable, other queue(s) are active.\n"); + } + if (qdev->legacy_check) + spin_unlock(&qdev->legacy_lock); + } +} + +static u32 ql_disable_completion_interrupt(struct ql_adapter *qdev, u32 intr) +{ + u32 var = 0; + + if (likely(test_bit(QL_MSIX_ENABLED, &qdev->flags))) + goto exit; + else if (!atomic_read(&qdev->intr_context[intr].irq_cnt)) { + ql_write32(qdev, INTR_EN, + qdev->intr_context[intr].intr_dis_mask); + var = ql_read32(qdev, STS); + } + atomic_inc(&qdev->intr_context[intr].irq_cnt); +exit: + return var; +} + +static void ql_enable_all_completion_interrupts(struct ql_adapter *qdev) +{ + int i; + for (i = 0; i < qdev->intr_count; i++) { + /* The enable call does a atomic_dec_and_test + * and enables only if the result is zero. + * So we precharge it here. + */ + atomic_set(&qdev->intr_context[i].irq_cnt, 1); + ql_enable_completion_interrupt(qdev, i); + } + +} + +int ql_read_flash_word(struct ql_adapter *qdev, int offset, u32 *data) +{ + int status = 0; + /* wait for reg to come ready */ + status = ql_wait_reg_rdy(qdev, + FLASH_ADDR, FLASH_ADDR_RDY, FLASH_ADDR_ERR); + if (status) + goto exit; + /* set up for reg read */ + ql_write32(qdev, FLASH_ADDR, FLASH_ADDR_R | offset); + /* wait for reg to come ready */ + status = ql_wait_reg_rdy(qdev, + FLASH_ADDR, FLASH_ADDR_RDY, FLASH_ADDR_ERR); + if (status) + goto exit; + /* get the data */ + *data = ql_read32(qdev, FLASH_DATA); +exit: + return status; +} + +static int ql_get_flash_params(struct ql_adapter *qdev) +{ + int i; + int status; + u32 *p = (u32 *)&qdev->flash; + + if (ql_sem_spinlock(qdev, SEM_FLASH_MASK)) + return -ETIMEDOUT; + + for (i = 0; i < sizeof(qdev->flash) / sizeof(u32); i++, p++) { + status = ql_read_flash_word(qdev, i, p); + if (status) { + QPRINTK(qdev, IFUP, ERR, "Error reading flash.\n"); + goto exit; + } + + } +exit: + ql_sem_unlock(qdev, SEM_FLASH_MASK); + return status; +} + +/* xgmac register are located behind the xgmac_addr and xgmac_data + * register pair. Each read/write requires us to wait for the ready + * bit before reading/writing the data. + */ +static int ql_write_xgmac_reg(struct ql_adapter *qdev, u32 reg, u32 data) +{ + int status; + /* wait for reg to come ready */ + status = ql_wait_reg_rdy(qdev, + XGMAC_ADDR, XGMAC_ADDR_RDY, XGMAC_ADDR_XME); + if (status) + return status; + /* write the data to the data reg */ + ql_write32(qdev, XGMAC_DATA, data); + /* trigger the write */ + ql_write32(qdev, XGMAC_ADDR, reg); + return status; +} + +/* xgmac register are located behind the xgmac_addr and xgmac_data + * register pair. Each read/write requires us to wait for the ready + * bit before reading/writing the data. + */ +int ql_read_xgmac_reg(struct ql_adapter *qdev, u32 reg, u32 *data) +{ + int status = 0; + /* wait for reg to come ready */ + status = ql_wait_reg_rdy(qdev, + XGMAC_ADDR, XGMAC_ADDR_RDY, XGMAC_ADDR_XME); + if (status) + goto exit; + /* set up for reg read */ + ql_write32(qdev, XGMAC_ADDR, reg | XGMAC_ADDR_R); + /* wait for reg to come ready */ + status = ql_wait_reg_rdy(qdev, + XGMAC_ADDR, XGMAC_ADDR_RDY, XGMAC_ADDR_XME); + if (status) + goto exit; + /* get the data */ + *data = ql_read32(qdev, XGMAC_DATA); +exit: + return status; +} + +/* This is used for reading the 64-bit statistics regs. */ +int ql_read_xgmac_reg64(struct ql_adapter *qdev, u32 reg, u64 *data) +{ + int status = 0; + u32 hi = 0; + u32 lo = 0; + + status = ql_read_xgmac_reg(qdev, reg, &lo); + if (status) + goto exit; + + status = ql_read_xgmac_reg(qdev, reg + 4, &hi); + if (status) + goto exit; + + *data = (u64) lo | ((u64) hi << 32); + +exit: + return status; +} + +/* Take the MAC Core out of reset. + * Enable statistics counting. + * Take the transmitter/receiver out of reset. + * This functionality may be done in the MPI firmware at a + * later date. + */ +static int ql_port_initialize(struct ql_adapter *qdev) +{ + int status = 0; + u32 data; + + if (ql_sem_trylock(qdev, qdev->xg_sem_mask)) { + /* Another function has the semaphore, so + * wait for the port init bit to come ready. + */ + QPRINTK(qdev, LINK, INFO, + "Another function has the semaphore, so wait for the port init bit to come ready.\n"); + status = ql_wait_reg_rdy(qdev, STS, qdev->port_init, 0); + if (status) { + QPRINTK(qdev, LINK, CRIT, + "Port initialize timed out.\n"); + } + return status; + } + + QPRINTK(qdev, LINK, INFO, "Got xgmac semaphore!.\n"); + /* Set the core reset. */ + status = ql_read_xgmac_reg(qdev, GLOBAL_CFG, &data); + if (status) + goto end; + data |= GLOBAL_CFG_RESET; + status = ql_write_xgmac_reg(qdev, GLOBAL_CFG, data); + if (status) + goto end; + + /* Clear the core reset and turn on jumbo for receiver. */ + data &= ~GLOBAL_CFG_RESET; /* Clear core reset. */ + data |= GLOBAL_CFG_JUMBO; /* Turn on jumbo. */ + data |= GLOBAL_CFG_TX_STAT_EN; + data |= GLOBAL_CFG_RX_STAT_EN; + status = ql_write_xgmac_reg(qdev, GLOBAL_CFG, data); + if (status) + goto end; + + /* Enable transmitter, and clear it's reset. */ + status = ql_read_xgmac_reg(qdev, TX_CFG, &data); + if (status) + goto end; + data &= ~TX_CFG_RESET; /* Clear the TX MAC reset. */ + data |= TX_CFG_EN; /* Enable the transmitter. */ + status = ql_write_xgmac_reg(qdev, TX_CFG, data); + if (status) + goto end; + + /* Enable receiver and clear it's reset. */ + status = ql_read_xgmac_reg(qdev, RX_CFG, &data); + if (status) + goto end; + data &= ~RX_CFG_RESET; /* Clear the RX MAC reset. */ + data |= RX_CFG_EN; /* Enable the receiver. */ + status = ql_write_xgmac_reg(qdev, RX_CFG, data); + if (status) + goto end; + + /* Turn on jumbo. */ + status = + ql_write_xgmac_reg(qdev, MAC_TX_PARAMS, MAC_TX_PARAMS_JUMBO | (0x2580 << 16)); + if (status) + goto end; + status = + ql_write_xgmac_reg(qdev, MAC_RX_PARAMS, 0x2580); + if (status) + goto end; + + /* Signal to the world that the port is enabled. */ + ql_write32(qdev, STS, ((qdev->port_init << 16) | qdev->port_init)); +end: + ql_sem_unlock(qdev, qdev->xg_sem_mask); + return status; +} + +/* Get the next large buffer. */ +struct bq_desc *ql_get_curr_lbuf(struct rx_ring *rx_ring) +{ + struct bq_desc *lbq_desc = &rx_ring->lbq[rx_ring->lbq_curr_idx]; + rx_ring->lbq_curr_idx++; + if (rx_ring->lbq_curr_idx == rx_ring->lbq_len) + rx_ring->lbq_curr_idx = 0; + rx_ring->lbq_free_cnt++; + return lbq_desc; +} + +/* Get the next small buffer. */ +struct bq_desc *ql_get_curr_sbuf(struct rx_ring *rx_ring) +{ + struct bq_desc *sbq_desc = &rx_ring->sbq[rx_ring->sbq_curr_idx]; + rx_ring->sbq_curr_idx++; + if (rx_ring->sbq_curr_idx == rx_ring->sbq_len) + rx_ring->sbq_curr_idx = 0; + rx_ring->sbq_free_cnt++; + return sbq_desc; +} + +/* Update an rx ring index. */ +static void ql_update_cq(struct rx_ring *rx_ring) +{ + rx_ring->cnsmr_idx++; + rx_ring->curr_entry++; + if (unlikely(rx_ring->cnsmr_idx == rx_ring->cq_len)) { + rx_ring->cnsmr_idx = 0; + rx_ring->curr_entry = rx_ring->cq_base; + } +} + +static void ql_write_cq_idx(struct rx_ring *rx_ring) +{ + ql_write_db_reg(rx_ring->cnsmr_idx, rx_ring->cnsmr_idx_db_reg); +} + +/* Process (refill) a large buffer queue. */ +static void ql_update_lbq(struct ql_adapter *qdev, struct rx_ring *rx_ring) +{ + int clean_idx = rx_ring->lbq_clean_idx; + struct bq_desc *lbq_desc; + struct bq_element *bq; + u64 map; + int i; + + while (rx_ring->lbq_free_cnt > 16) { + for (i = 0; i < 16; i++) { + QPRINTK(qdev, RX_STATUS, DEBUG, + "lbq: try cleaning clean_idx = %d.\n", + clean_idx); + lbq_desc = &rx_ring->lbq[clean_idx]; + bq = lbq_desc->bq; + if (lbq_desc->p.lbq_page == NULL) { + QPRINTK(qdev, RX_STATUS, DEBUG, + "lbq: getting new page for index %d.\n", + lbq_desc->index); + lbq_desc->p.lbq_page = alloc_page(GFP_ATOMIC); + if (lbq_desc->p.lbq_page == NULL) { + QPRINTK(qdev, RX_STATUS, ERR, + "Couldn't get a page.\n"); + return; + } + map = pci_map_page(qdev->pdev, + lbq_desc->p.lbq_page, + 0, PAGE_SIZE, + PCI_DMA_FROMDEVICE); + if (pci_dma_mapping_error(qdev->pdev, map)) { + QPRINTK(qdev, RX_STATUS, ERR, + "PCI mapping failed.\n"); + return; + } + pci_unmap_addr_set(lbq_desc, mapaddr, map); + pci_unmap_len_set(lbq_desc, maplen, PAGE_SIZE); + bq->addr_lo = /*lbq_desc->addr_lo = */ + cpu_to_le32(map); + bq->addr_hi = /*lbq_desc->addr_hi = */ + cpu_to_le32(map >> 32); + } + clean_idx++; + if (clean_idx == rx_ring->lbq_len) + clean_idx = 0; + } + + rx_ring->lbq_clean_idx = clean_idx; + rx_ring->lbq_prod_idx += 16; + if (rx_ring->lbq_prod_idx == rx_ring->lbq_len) + rx_ring->lbq_prod_idx = 0; + QPRINTK(qdev, RX_STATUS, DEBUG, + "lbq: updating prod idx = %d.\n", + rx_ring->lbq_prod_idx); + ql_write_db_reg(rx_ring->lbq_prod_idx, + rx_ring->lbq_prod_idx_db_reg); + rx_ring->lbq_free_cnt -= 16; + } +} + +/* Process (refill) a small buffer queue. */ +static void ql_update_sbq(struct ql_adapter *qdev, struct rx_ring *rx_ring) +{ + int clean_idx = rx_ring->sbq_clean_idx; + struct bq_desc *sbq_desc; + struct bq_element *bq; + u64 map; + int i; + + while (rx_ring->sbq_free_cnt > 16) { + for (i = 0; i < 16; i++) { + sbq_desc = &rx_ring->sbq[clean_idx]; + QPRINTK(qdev, RX_STATUS, DEBUG, + "sbq: try cleaning clean_idx = %d.\n", + clean_idx); + bq = sbq_desc->bq; + if (sbq_desc->p.skb == NULL) { + QPRINTK(qdev, RX_STATUS, DEBUG, + "sbq: getting new skb for index %d.\n", + sbq_desc->index); + sbq_desc->p.skb = + netdev_alloc_skb(qdev->ndev, + rx_ring->sbq_buf_size); + if (sbq_desc->p.skb == NULL) { + QPRINTK(qdev, PROBE, ERR, + "Couldn't get an skb.\n"); + rx_ring->sbq_clean_idx = clean_idx; + return; + } + skb_reserve(sbq_desc->p.skb, QLGE_SB_PAD); + map = pci_map_single(qdev->pdev, + sbq_desc->p.skb->data, + rx_ring->sbq_buf_size / + 2, PCI_DMA_FROMDEVICE); + pci_unmap_addr_set(sbq_desc, mapaddr, map); + pci_unmap_len_set(sbq_desc, maplen, + rx_ring->sbq_buf_size / 2); + bq->addr_lo = cpu_to_le32(map); + bq->addr_hi = cpu_to_le32(map >> 32); + } + + clean_idx++; + if (clean_idx == rx_ring->sbq_len) + clean_idx = 0; + } + rx_ring->sbq_clean_idx = clean_idx; + rx_ring->sbq_prod_idx += 16; + if (rx_ring->sbq_prod_idx == rx_ring->sbq_len) + rx_ring->sbq_prod_idx = 0; + QPRINTK(qdev, RX_STATUS, DEBUG, + "sbq: updating prod idx = %d.\n", + rx_ring->sbq_prod_idx); + ql_write_db_reg(rx_ring->sbq_prod_idx, + rx_ring->sbq_prod_idx_db_reg); + + rx_ring->sbq_free_cnt -= 16; + } +} + +static void ql_update_buffer_queues(struct ql_adapter *qdev, + struct rx_ring *rx_ring) +{ + ql_update_sbq(qdev, rx_ring); + ql_update_lbq(qdev, rx_ring); +} + +/* Unmaps tx buffers. Can be called from send() if a pci mapping + * fails at some stage, or from the interrupt when a tx completes. + */ +static void ql_unmap_send(struct ql_adapter *qdev, + struct tx_ring_desc *tx_ring_desc, int mapped) +{ + int i; + for (i = 0; i < mapped; i++) { + if (i == 0 || (i == 7 && mapped > 7)) { + /* + * Unmap the skb->data area, or the + * external sglist (AKA the Outbound + * Address List (OAL)). + * If its the zeroeth element, then it's + * the skb->data area. If it's the 7th + * element and there is more than 6 frags, + * then its an OAL. + */ + if (i == 7) { + QPRINTK(qdev, TX_DONE, DEBUG, + "unmapping OAL area.\n"); + } + pci_unmap_single(qdev->pdev, + pci_unmap_addr(&tx_ring_desc->map[i], + mapaddr), + pci_unmap_len(&tx_ring_desc->map[i], + maplen), + PCI_DMA_TODEVICE); + } else { + QPRINTK(qdev, TX_DONE, DEBUG, "unmapping frag %d.\n", + i); + pci_unmap_page(qdev->pdev, + pci_unmap_addr(&tx_ring_desc->map[i], + mapaddr), + pci_unmap_len(&tx_ring_desc->map[i], + maplen), PCI_DMA_TODEVICE); + } + } + +} + +/* Map the buffers for this transmit. This will return + * NETDEV_TX_BUSY or NETDEV_TX_OK based on success. + */ +static int ql_map_send(struct ql_adapter *qdev, + struct ob_mac_iocb_req *mac_iocb_ptr, + struct sk_buff *skb, struct tx_ring_desc *tx_ring_desc) +{ + int len = skb_headlen(skb); + dma_addr_t map; + int frag_idx, err, map_idx = 0; + struct tx_buf_desc *tbd = mac_iocb_ptr->tbd; + int frag_cnt = skb_shinfo(skb)->nr_frags; + + if (frag_cnt) { + QPRINTK(qdev, TX_QUEUED, DEBUG, "frag_cnt = %d.\n", frag_cnt); + } + /* + * Map the skb buffer first. + */ + map = pci_map_single(qdev->pdev, skb->data, len, PCI_DMA_TODEVICE); + + err = pci_dma_mapping_error(qdev->pdev, map); + if (err) { + QPRINTK(qdev, TX_QUEUED, ERR, + "PCI mapping failed with error: %d\n", err); + + return NETDEV_TX_BUSY; + } + + tbd->len = cpu_to_le32(len); + tbd->addr = cpu_to_le64(map); + pci_unmap_addr_set(&tx_ring_desc->map[map_idx], mapaddr, map); + pci_unmap_len_set(&tx_ring_desc->map[map_idx], maplen, len); + map_idx++; + + /* + * This loop fills the remainder of the 8 address descriptors + * in the IOCB. If there are more than 7 fragments, then the + * eighth address desc will point to an external list (OAL). + * When this happens, the remainder of the frags will be stored + * in this list. + */ + for (frag_idx = 0; frag_idx < frag_cnt; frag_idx++, map_idx++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[frag_idx]; + tbd++; + if (frag_idx == 6 && frag_cnt > 7) { + /* Let's tack on an sglist. + * Our control block will now + * look like this: + * iocb->seg[0] = skb->data + * iocb->seg[1] = frag[0] + * iocb->seg[2] = frag[1] + * iocb->seg[3] = frag[2] + * iocb->seg[4] = frag[3] + * iocb->seg[5] = frag[4] + * iocb->seg[6] = frag[5] + * iocb->seg[7] = ptr to OAL (external sglist) + * oal->seg[0] = frag[6] + * oal->seg[1] = frag[7] + * oal->seg[2] = frag[8] + * oal->seg[3] = frag[9] + * oal->seg[4] = frag[10] + * etc... + */ + /* Tack on the OAL in the eighth segment of IOCB. */ + map = pci_map_single(qdev->pdev, &tx_ring_desc->oal, + sizeof(struct oal), + PCI_DMA_TODEVICE); + err = pci_dma_mapping_error(qdev->pdev, map); + if (err) { + QPRINTK(qdev, TX_QUEUED, ERR, + "PCI mapping outbound address list with error: %d\n", + err); + goto map_error; + } + + tbd->addr = cpu_to_le64(map); + /* + * The length is the number of fragments + * that remain to be mapped times the length + * of our sglist (OAL). + */ + tbd->len = + cpu_to_le32((sizeof(struct tx_buf_desc) * + (frag_cnt - frag_idx)) | TX_DESC_C); + pci_unmap_addr_set(&tx_ring_desc->map[map_idx], mapaddr, + map); + pci_unmap_len_set(&tx_ring_desc->map[map_idx], maplen, + sizeof(struct oal)); + tbd = (struct tx_buf_desc *)&tx_ring_desc->oal; + map_idx++; + } + + map = + pci_map_page(qdev->pdev, frag->page, + frag->page_offset, frag->size, + PCI_DMA_TODEVICE); + + err = pci_dma_mapping_error(qdev->pdev, map); + if (err) { + QPRINTK(qdev, TX_QUEUED, ERR, + "PCI mapping frags failed with error: %d.\n", + err); + goto map_error; + } + + tbd->addr = cpu_to_le64(map); + tbd->len = cpu_to_le32(frag->size); + pci_unmap_addr_set(&tx_ring_desc->map[map_idx], mapaddr, map); + pci_unmap_len_set(&tx_ring_desc->map[map_idx], maplen, + frag->size); + + } + /* Save the number of segments we've mapped. */ + tx_ring_desc->map_cnt = map_idx; + /* Terminate the last segment. */ + tbd->len = cpu_to_le32(le32_to_cpu(tbd->len) | TX_DESC_E); + return NETDEV_TX_OK; + +map_error: + /* + * If the first frag mapping failed, then i will be zero. + * This causes the unmap of the skb->data area. Otherwise + * we pass in the number of frags that mapped successfully + * so they can be umapped. + */ + ql_unmap_send(qdev, tx_ring_desc, map_idx); + return NETDEV_TX_BUSY; +} + +void ql_realign_skb(struct sk_buff *skb, int len) |