diff options
Diffstat (limited to 'drivers/net/pcmcia/xirc2ps_cs.c')
| -rw-r--r-- | drivers/net/pcmcia/xirc2ps_cs.c | 36 |
1 files changed, 3 insertions, 33 deletions
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index 4d1802e457b..5e6b62ba888 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -297,31 +297,9 @@ static void xirc2ps_detach(struct pcmcia_device *p_dev); static irqreturn_t xirc2ps_interrupt(int irq, void *dev_id); -/**************** - * A linked list of "instances" of the device. Each actual - * PCMCIA card corresponds to one device instance, and is described - * by one struct pcmcia_device structure (defined in ds.h). - * - * You may not want to use a linked list for this -- for example, the - * memory card driver uses an array of struct pcmcia_device pointers, where minor - * device numbers are used to derive the corresponding array index. - */ - -/**************** - * A driver needs to provide a dev_node_t structure for each device - * on a card. In some cases, there is only one device per card (for - * example, ethernet cards, modems). In other cases, there may be - * many actual or logical devices (SCSI adapters, memory cards with - * multiple partitions). The dev_node_t structures need to be kept - * in a linked list starting at the 'dev' field of a struct pcmcia_device - * structure. We allocate them in the card's private data structure, - * because they generally can't be allocated dynamically. - */ - typedef struct local_info_t { struct net_device *dev; struct pcmcia_device *p_dev; - dev_node_t node; int card_type; int probe_port; @@ -555,7 +533,6 @@ xirc2ps_probe(struct pcmcia_device *link) link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; link->conf.ConfigIndex = 1; - link->irq.Handler = xirc2ps_interrupt; /* Fill in card specific entries */ dev->netdev_ops = &netdev_ops; @@ -580,8 +557,7 @@ xirc2ps_detach(struct pcmcia_device *link) dev_dbg(&link->dev, "detach\n"); - if (link->dev_node) - unregister_netdev(dev); + unregister_netdev(dev); xirc2ps_release(link); @@ -841,7 +817,6 @@ xirc2ps_config(struct pcmcia_device * link) link->conf.Attributes |= CONF_ENABLE_SPKR; link->conf.Status |= CCSR_AUDIO_ENA; } - link->irq.Attributes |= IRQ_TYPE_DYNAMIC_SHARING; link->io.NumPorts2 = 8; link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; if (local->dingo) { @@ -866,7 +841,6 @@ xirc2ps_config(struct pcmcia_device * link) } printk(KNOT_XIRC "no ports available\n"); } else { - link->irq.Attributes |= IRQ_TYPE_DYNAMIC_SHARING; link->io.NumPorts1 = 16; for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) { link->io.BasePort1 = ioaddr; @@ -885,7 +859,7 @@ xirc2ps_config(struct pcmcia_device * link) * Now allocate an interrupt line. Note that this does not * actually assign a handler to the interrupt. */ - if ((err=pcmcia_request_irq(link, &link->irq))) + if ((err=pcmcia_request_irq(link, xirc2ps_interrupt))) goto config_error; /**************** @@ -982,23 +956,19 @@ xirc2ps_config(struct pcmcia_device * link) printk(KNOT_XIRC "invalid if_port requested\n"); /* we can now register the device with the net subsystem */ - dev->irq = link->irq.AssignedIRQ; + dev->irq = link->irq; dev->base_addr = link->io.BasePort1; if (local->dingo) do_reset(dev, 1); /* a kludge to make the cem56 work */ - link->dev_node = &local->node; SET_NETDEV_DEV(dev, &link->dev); if ((err=register_netdev(dev))) { printk(KNOT_XIRC "register_netdev() failed\n"); - link->dev_node = NULL; goto config_error; } - strcpy(local->node.dev_name, dev->name); - /* give some infos about the hardware */ printk(KERN_INFO "%s: %s: port %#3lx, irq %d, hwaddr %pM\n", dev->name, local->manf_str,(u_long)dev->base_addr, (int)dev->irq, |