aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/pcmcia/nmclan_cs.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/pcmcia/nmclan_cs.c')
-rw-r--r--drivers/net/pcmcia/nmclan_cs.c1699
1 files changed, 1699 insertions, 0 deletions
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c
new file mode 100644
index 00000000000..4603807fcaf
--- /dev/null
+++ b/drivers/net/pcmcia/nmclan_cs.c
@@ -0,0 +1,1699 @@
+/* ----------------------------------------------------------------------------
+Linux PCMCIA ethernet adapter driver for the New Media Ethernet LAN.
+ nmclan_cs.c,v 0.16 1995/07/01 06:42:17 rpao Exp rpao
+
+ The Ethernet LAN uses the Advanced Micro Devices (AMD) Am79C940 Media
+ Access Controller for Ethernet (MACE). It is essentially the Am2150
+ PCMCIA Ethernet card contained in the Am2150 Demo Kit.
+
+Written by Roger C. Pao <rpao@paonet.org>
+ Copyright 1995 Roger C. Pao
+ Linux 2.5 cleanups Copyright Red Hat 2003
+
+ This software may be used and distributed according to the terms of
+ the GNU General Public License.
+
+Ported to Linux 1.3.* network driver environment by
+ Matti Aarnio <mea@utu.fi>
+
+References
+
+ Am2150 Technical Reference Manual, Revision 1.0, August 17, 1993
+ Am79C940 (MACE) Data Sheet, 1994
+ Am79C90 (C-LANCE) Data Sheet, 1994
+ Linux PCMCIA Programmer's Guide v1.17
+ /usr/src/linux/net/inet/dev.c, Linux kernel 1.2.8
+
+ Eric Mears, New Media Corporation
+ Tom Pollard, New Media Corporation
+ Dean Siasoyco, New Media Corporation
+ Ken Lesniak, Silicon Graphics, Inc. <lesniak@boston.sgi.com>
+ Donald Becker <becker@scyld.com>
+ David Hinds <dahinds@users.sourceforge.net>
+
+ The Linux client driver is based on the 3c589_cs.c client driver by
+ David Hinds.
+
+ The Linux network driver outline is based on the 3c589_cs.c driver,
+ the 8390.c driver, and the example skeleton.c kernel code, which are
+ by Donald Becker.
+
+ The Am2150 network driver hardware interface code is based on the
+ OS/9000 driver for the New Media Ethernet LAN by Eric Mears.
+
+ Special thanks for testing and help in debugging this driver goes
+ to Ken Lesniak.
+
+-------------------------------------------------------------------------------
+Driver Notes and Issues
+-------------------------------------------------------------------------------
+
+1. Developed on a Dell 320SLi
+ PCMCIA Card Services 2.6.2
+ Linux dell 1.2.10 #1 Thu Jun 29 20:23:41 PDT 1995 i386
+
+2. rc.pcmcia may require loading pcmcia_core with io_speed=300:
+ 'insmod pcmcia_core.o io_speed=300'.
+ This will avoid problems with fast systems which causes rx_framecnt
+ to return random values.
+
+3. If hot extraction does not work for you, use 'ifconfig eth0 down'
+ before extraction.
+
+4. There is a bad slow-down problem in this driver.
+
+5. Future: Multicast processing. In the meantime, do _not_ compile your
+ kernel with multicast ip enabled.
+
+-------------------------------------------------------------------------------
+History
+-------------------------------------------------------------------------------
+Log: nmclan_cs.c,v
+ * 2.5.75-ac1 2003/07/11 Alan Cox <alan@redhat.com>
+ * Fixed hang on card eject as we probe it
+ * Cleaned up to use new style locking.
+ *
+ * Revision 0.16 1995/07/01 06:42:17 rpao
+ * Bug fix: nmclan_reset() called CardServices incorrectly.
+ *
+ * Revision 0.15 1995/05/24 08:09:47 rpao
+ * Re-implement MULTI_TX dev->tbusy handling.
+ *
+ * Revision 0.14 1995/05/23 03:19:30 rpao
+ * Added, in nmclan_config(), "tuple.Attributes = 0;".
+ * Modified MACE ID check to ignore chip revision level.
+ * Avoid tx_free_frames race condition between _start_xmit and _interrupt.
+ *
+ * Revision 0.13 1995/05/18 05:56:34 rpao
+ * Statistics changes.
+ * Bug fix: nmclan_reset did not enable TX and RX: call restore_multicast_list.
+ * Bug fix: mace_interrupt checks ~MACE_IMR_DEFAULT. Fixes driver lockup.
+ *
+ * Revision 0.12 1995/05/14 00:12:23 rpao
+ * Statistics overhaul.
+ *
+
+95/05/13 rpao V0.10a
+ Bug fix: MACE statistics counters used wrong I/O ports.
+ Bug fix: mace_interrupt() needed to allow statistics to be
+ processed without RX or TX interrupts pending.
+95/05/11 rpao V0.10
+ Multiple transmit request processing.
+ Modified statistics to use MACE counters where possible.
+95/05/10 rpao V0.09 Bug fix: Must use IO_DATA_PATH_WIDTH_AUTO.
+ *Released
+95/05/10 rpao V0.08
+ Bug fix: Make all non-exported functions private by using
+ static keyword.
+ Bug fix: Test IntrCnt _before_ reading MACE_IR.
+95/05/10 rpao V0.07 Statistics.
+95/05/09 rpao V0.06 Fix rx_framecnt problem by addition of PCIC wait states.
+
+---------------------------------------------------------------------------- */
+
+#define DRV_NAME "nmclan_cs"
+#define DRV_VERSION "0.16"
+
+
+/* ----------------------------------------------------------------------------
+Conditional Compilation Options
+---------------------------------------------------------------------------- */
+
+#define MULTI_TX 0
+#define RESET_ON_TIMEOUT 1
+#define TX_INTERRUPTABLE 1
+#define RESET_XILINX 0
+
+/* ----------------------------------------------------------------------------
+Include Files
+---------------------------------------------------------------------------- */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <linux/ethtool.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+#include <linux/bitops.h>
+
+#include <pcmcia/version.h>
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cisreg.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ds.h>
+
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/system.h>
+
+/* ----------------------------------------------------------------------------
+Defines
+---------------------------------------------------------------------------- */
+
+#define ETHER_ADDR_LEN ETH_ALEN
+ /* 6 bytes in an Ethernet Address */
+#define MACE_LADRF_LEN 8
+ /* 8 bytes in Logical Address Filter */
+
+/* Loop Control Defines */
+#define MACE_MAX_IR_ITERATIONS 10
+#define MACE_MAX_RX_ITERATIONS 12
+ /*
+ TBD: Dean brought this up, and I assumed the hardware would
+ handle it:
+
+ If MACE_MAX_RX_ITERATIONS is > 1, rx_framecnt may still be
+ non-zero when the isr exits. We may not get another interrupt
+ to process the remaining packets for some time.
+ */
+
+/*
+The Am2150 has a Xilinx XC3042 field programmable gate array (FPGA)
+which manages the interface between the MACE and the PCMCIA bus. It
+also includes buffer management for the 32K x 8 SRAM to control up to
+four transmit and 12 receive frames at a time.
+*/
+#define AM2150_MAX_TX_FRAMES 4
+#define AM2150_MAX_RX_FRAMES 12
+
+/* Am2150 Ethernet Card I/O Mapping */
+#define AM2150_RCV 0x00
+#define AM2150_XMT 0x04
+#define AM2150_XMT_SKIP 0x09
+#define AM2150_RCV_NEXT 0x0A
+#define AM2150_RCV_FRAME_COUNT 0x0B
+#define AM2150_MACE_BANK 0x0C
+#define AM2150_MACE_BASE 0x10
+
+/* MACE Registers */
+#define MACE_RCVFIFO 0
+#define MACE_XMTFIFO 1
+#define MACE_XMTFC 2
+#define MACE_XMTFS 3
+#define MACE_XMTRC 4
+#define MACE_RCVFC 5
+#define MACE_RCVFS 6
+#define MACE_FIFOFC 7
+#define MACE_IR 8
+#define MACE_IMR 9
+#define MACE_PR 10
+#define MACE_BIUCC 11
+#define MACE_FIFOCC 12
+#define MACE_MACCC 13
+#define MACE_PLSCC 14
+#define MACE_PHYCC 15
+#define MACE_CHIPIDL 16
+#define MACE_CHIPIDH 17
+#define MACE_IAC 18
+/* Reserved */
+#define MACE_LADRF 20
+#define MACE_PADR 21
+/* Reserved */
+/* Reserved */
+#define MACE_MPC 24
+/* Reserved */
+#define MACE_RNTPC 26
+#define MACE_RCVCC 27
+/* Reserved */
+#define MACE_UTR 29
+#define MACE_RTR1 30
+#define MACE_RTR2 31
+
+/* MACE Bit Masks */
+#define MACE_XMTRC_EXDEF 0x80
+#define MACE_XMTRC_XMTRC 0x0F
+
+#define MACE_XMTFS_XMTSV 0x80
+#define MACE_XMTFS_UFLO 0x40
+#define MACE_XMTFS_LCOL 0x20
+#define MACE_XMTFS_MORE 0x10
+#define MACE_XMTFS_ONE 0x08
+#define MACE_XMTFS_DEFER 0x04
+#define MACE_XMTFS_LCAR 0x02
+#define MACE_XMTFS_RTRY 0x01
+
+#define MACE_RCVFS_RCVSTS 0xF000
+#define MACE_RCVFS_OFLO 0x8000
+#define MACE_RCVFS_CLSN 0x4000
+#define MACE_RCVFS_FRAM 0x2000
+#define MACE_RCVFS_FCS 0x1000
+
+#define MACE_FIFOFC_RCVFC 0xF0
+#define MACE_FIFOFC_XMTFC 0x0F
+
+#define MACE_IR_JAB 0x80
+#define MACE_IR_BABL 0x40
+#define MACE_IR_CERR 0x20
+#define MACE_IR_RCVCCO 0x10
+#define MACE_IR_RNTPCO 0x08
+#define MACE_IR_MPCO 0x04
+#define MACE_IR_RCVINT 0x02
+#define MACE_IR_XMTINT 0x01
+
+#define MACE_MACCC_PROM 0x80
+#define MACE_MACCC_DXMT2PD 0x40
+#define MACE_MACCC_EMBA 0x20
+#define MACE_MACCC_RESERVED 0x10
+#define MACE_MACCC_DRCVPA 0x08
+#define MACE_MACCC_DRCVBC 0x04
+#define MACE_MACCC_ENXMT 0x02
+#define MACE_MACCC_ENRCV 0x01
+
+#define MACE_PHYCC_LNKFL 0x80
+#define MACE_PHYCC_DLNKTST 0x40
+#define MACE_PHYCC_REVPOL 0x20
+#define MACE_PHYCC_DAPC 0x10
+#define MACE_PHYCC_LRT 0x08
+#define MACE_PHYCC_ASEL 0x04
+#define MACE_PHYCC_RWAKE 0x02
+#define MACE_PHYCC_AWAKE 0x01
+
+#define MACE_IAC_ADDRCHG 0x80
+#define MACE_IAC_PHYADDR 0x04
+#define MACE_IAC_LOGADDR 0x02
+
+#define MACE_UTR_RTRE 0x80
+#define MACE_UTR_RTRD 0x40
+#define MACE_UTR_RPA 0x20
+#define MACE_UTR_FCOLL 0x10
+#define MACE_UTR_RCVFCSE 0x08
+#define MACE_UTR_LOOP_INCL_MENDEC 0x06
+#define MACE_UTR_LOOP_NO_MENDEC 0x04
+#define MACE_UTR_LOOP_EXTERNAL 0x02
+#define MACE_UTR_LOOP_NONE 0x00
+#define MACE_UTR_RESERVED 0x01
+
+/* Switch MACE register bank (only 0 and 1 are valid) */
+#define MACEBANK(win_num) outb((win_num), ioaddr + AM2150_MACE_BANK)
+
+#define MACE_IMR_DEFAULT \
+ (0xFF - \
+ ( \
+ MACE_IR_CERR | \
+ MACE_IR_RCVCCO | \
+ MACE_IR_RNTPCO | \
+ MACE_IR_MPCO | \
+ MACE_IR_RCVINT | \
+ MACE_IR_XMTINT \
+ ) \
+ )
+#undef MACE_IMR_DEFAULT
+#define MACE_IMR_DEFAULT 0x00 /* New statistics handling: grab everything */
+
+#define TX_TIMEOUT ((400*HZ)/1000)
+
+/* ----------------------------------------------------------------------------
+Type Definitions
+---------------------------------------------------------------------------- */
+
+typedef struct _mace_statistics {
+ /* MACE_XMTFS */
+ int xmtsv;
+ int uflo;
+ int lcol;
+ int more;
+ int one;
+ int defer;
+ int lcar;
+ int rtry;
+
+ /* MACE_XMTRC */
+ int exdef;
+ int xmtrc;
+
+ /* RFS1--Receive Status (RCVSTS) */
+ int oflo;
+ int clsn;
+ int fram;
+ int fcs;
+
+ /* RFS2--Runt Packet Count (RNTPC) */
+ int rfs_rntpc;
+
+ /* RFS3--Receive Collision Count (RCVCC) */
+ int rfs_rcvcc;
+
+ /* MACE_IR */
+ int jab;
+ int babl;
+ int cerr;
+ int rcvcco;
+ int rntpco;
+ int mpco;
+
+ /* MACE_MPC */
+ int mpc;
+
+ /* MACE_RNTPC */
+ int rntpc;
+
+ /* MACE_RCVCC */
+ int rcvcc;
+} mace_statistics;
+
+typedef struct _mace_private {
+ dev_link_t link;
+ dev_node_t node;
+ struct net_device_stats linux_stats; /* Linux statistics counters */
+ mace_statistics mace_stats; /* MACE chip statistics counters */
+
+ /* restore_multicast_list() state variables */
+ int multicast_ladrf[MACE_LADRF_LEN]; /* Logical address filter */
+ int multicast_num_addrs;
+
+ char tx_free_frames; /* Number of free transmit frame buffers */
+ char tx_irq_disabled; /* MACE TX interrupt disabled */
+
+ spinlock_t bank_lock; /* Must be held if you step off bank 0 */
+} mace_private;
+
+/* ----------------------------------------------------------------------------
+Private Global Variables
+---------------------------------------------------------------------------- */
+
+#ifdef PCMCIA_DEBUG
+static char rcsid[] =
+"nmclan_cs.c,v 0.16 1995/07/01 06:42:17 rpao Exp rpao";
+static char *version =
+DRV_NAME " " DRV_VERSION " (Roger C. Pao)";
+#endif
+
+static dev_info_t dev_info="nmclan_cs";
+static dev_link_t *dev_list;
+
+static char *if_names[]={
+ "Auto", "10baseT", "BNC",
+};
+
+/* ----------------------------------------------------------------------------
+Parameters
+ These are the parameters that can be set during loading with
+ 'insmod'.
+---------------------------------------------------------------------------- */
+
+MODULE_DESCRIPTION("New Media PCMCIA ethernet driver");
+MODULE_LICENSE("GPL");
+
+#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
+
+/* 0=auto, 1=10baseT, 2 = 10base2, default=auto */
+INT_MODULE_PARM(if_port, 0);
+
+#ifdef PCMCIA_DEBUG
+INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG);
+#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
+#else
+#define DEBUG(n, args...)
+#endif
+
+/* ----------------------------------------------------------------------------
+Function Prototypes
+---------------------------------------------------------------------------- */
+
+static void nmclan_config(dev_link_t *link);
+static void nmclan_release(dev_link_t *link);
+static int nmclan_event(event_t event, int priority,
+ event_callback_args_t *args);
+
+static void nmclan_reset(struct net_device *dev);
+static int mace_config(struct net_device *dev, struct ifmap *map);
+static int mace_open(struct net_device *dev);
+static int mace_close(struct net_device *dev);
+static int mace_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static void mace_tx_timeout(struct net_device *dev);
+static irqreturn_t mace_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static struct net_device_stats *mace_get_stats(struct net_device *dev);
+static int mace_rx(struct net_device *dev, unsigned char RxCnt);
+static void restore_multicast_list(struct net_device *dev);
+static void set_multicast_list(struct net_device *dev);
+static struct ethtool_ops netdev_ethtool_ops;
+
+
+static dev_link_t *nmclan_attach(void);
+static void nmclan_detach(dev_link_t *);
+
+/* ----------------------------------------------------------------------------
+nmclan_attach
+ Creates an "instance" of the driver, allocating local data
+ structures for one device. The device is registered with Card
+ Services.
+---------------------------------------------------------------------------- */
+
+static dev_link_t *nmclan_attach(void)
+{
+ mace_private *lp;
+ dev_link_t *link;
+ struct net_device *dev;
+ client_reg_t client_reg;
+ int ret;
+
+ DEBUG(0, "nmclan_attach()\n");
+ DEBUG(1, "%s\n", rcsid);
+
+ /* Create new ethernet device */
+ dev = alloc_etherdev(sizeof(mace_private));
+ if (!dev)
+ return NULL;
+ lp = netdev_priv(dev);
+ link = &lp->link;
+ link->priv = dev;
+
+ spin_lock_init(&lp->bank_lock);
+ link->io.NumPorts1 = 32;
+ link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ link->io.IOAddrLines = 5;
+ link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
+ link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+ link->irq.Handler = &mace_interrupt;
+ link->irq.Instance = dev;
+ link->conf.Attributes = CONF_ENABLE_IRQ;
+ link->conf.Vcc = 50;
+ link->conf.IntType = INT_MEMORY_AND_IO;
+ link->conf.ConfigIndex = 1;
+ link->conf.Present = PRESENT_OPTION;
+
+ lp->tx_free_frames=AM2150_MAX_TX_FRAMES;
+
+ SET_MODULE_OWNER(dev);
+ dev->hard_start_xmit = &mace_start_xmit;
+ dev->set_config = &mace_config;
+ dev->get_stats = &mace_get_stats;
+ dev->set_multicast_list = &set_multicast_list;
+ SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
+ dev->open = &mace_open;
+ dev->stop = &mace_close;
+#ifdef HAVE_TX_TIMEOUT
+ dev->tx_timeout = mace_tx_timeout;
+ dev->watchdog_timeo = TX_TIMEOUT;
+#endif
+
+ /* Register with Card Services */
+ link->next = dev_list;
+ dev_list = link;
+ client_reg.dev_info = &dev_info;
+ client_reg.EventMask =
+ CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL |
+ CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET |
+ CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME;
+ client_reg.event_handler = &nmclan_event;
+ client_reg.Version = 0x0210;
+ client_reg.event_callback_args.client_data = link;
+ ret = pcmcia_register_client(&link->handle, &client_reg);
+ if (ret != 0) {
+ cs_error(link->handle, RegisterClient, ret);
+ nmclan_detach(link);
+ return NULL;
+ }
+
+ return link;
+} /* nmclan_attach */
+
+/* ----------------------------------------------------------------------------
+nmclan_detach
+ This deletes a driver "instance". The device is de-registered
+ with Card Services. If it has been released, all local data
+ structures are freed. Otherwise, the structures will be freed
+ when the device is released.
+---------------------------------------------------------------------------- */
+
+static void nmclan_detach(dev_link_t *link)
+{
+ struct net_device *dev = link->priv;
+ dev_link_t **linkp;
+
+ DEBUG(0, "nmclan_detach(0x%p)\n", link);
+
+ /* Locate device structure */
+ for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
+ if (*linkp == link) break;
+ if (*linkp == NULL)
+ return;
+
+ if (link->dev)
+ unregister_netdev(dev);
+
+ if (link->state & DEV_CONFIG)
+ nmclan_release(link);
+
+ if (link->handle)
+ pcmcia_deregister_client(link->handle);
+
+ /* Unlink device structure, free bits */
+ *linkp = link->next;
+ free_netdev(dev);
+} /* nmclan_detach */
+
+/* ----------------------------------------------------------------------------
+mace_read
+ Reads a MACE register. This is bank independent; however, the
+ caller must ensure that this call is not interruptable. We are
+ assuming that during normal operation, the MACE is always in
+ bank 0.
+---------------------------------------------------------------------------- */
+static int mace_read(mace_private *lp, kio_addr_t ioaddr, int reg)
+{
+ int data = 0xFF;
+ unsigned long flags;
+
+ switch (reg >> 4) {
+ case 0: /* register 0-15 */
+ data = inb(ioaddr + AM2150_MACE_BASE + reg);
+ break;
+ case 1: /* register 16-31 */
+ spin_lock_irqsave(&lp->bank_lock, flags);
+ MACEBANK(1);
+ data = inb(ioaddr + AM2150_MACE_BASE + (reg & 0x0F));
+ MACEBANK(0);
+ spin_unlock_irqrestore(&lp->bank_lock, flags);
+ break;
+ }
+ return (data & 0xFF);
+} /* mace_read */
+
+/* ----------------------------------------------------------------------------
+mace_write
+ Writes to a MACE register. This is bank independent; however,
+ the caller must ensure that this call is not interruptable. We
+ are assuming that during normal operation, the MACE is always in
+ bank 0.
+---------------------------------------------------------------------------- */
+static void mace_write(mace_private *lp, kio_addr_t ioaddr, int reg, int data)
+{
+ unsigned long flags;
+
+ switch (reg >> 4) {
+ case 0: /* register 0-15 */
+ outb(data & 0xFF, ioaddr + AM2150_MACE_BASE + reg);
+ break;
+ case 1: /* register 16-31 */
+ spin_lock_irqsave(&lp->bank_lock, flags);
+ MACEBANK(1);
+ outb(data & 0xFF, ioaddr + AM2150_MACE_BASE + (reg & 0x0F));
+ MACEBANK(0);
+ spin_unlock_irqrestore(&lp->bank_lock, flags);
+ break;
+ }
+} /* mace_write */
+
+/* ----------------------------------------------------------------------------
+mace_init
+ Resets the MACE chip.
+---------------------------------------------------------------------------- */
+static int mace_init(mace_private *lp, kio_addr_t ioaddr, char *enet_addr)
+{
+ int i;
+ int ct = 0;
+
+ /* MACE Software reset */
+ mace_write(lp, ioaddr, MACE_BIUCC, 1);
+ while (mace_read(lp, ioaddr, MACE_BIUCC) & 0x01) {
+ /* Wait for reset bit to be cleared automatically after <= 200ns */;
+ if(++ct > 500)
+ {
+ printk(KERN_ERR "mace: reset failed, card removed ?\n");
+ return -1;
+ }
+ udelay(1);
+ }
+ mace_write(lp, ioaddr, MACE_BIUCC, 0);
+
+ /* The Am2150 requires that the MACE FIFOs operate in burst mode. */
+ mace_write(lp, ioaddr, MACE_FIFOCC, 0x0F);
+
+ mace_write(lp,ioaddr, MACE_RCVFC, 0); /* Disable Auto Strip Receive */
+ mace_write(lp, ioaddr, MACE_IMR, 0xFF); /* Disable all interrupts until _open */
+
+ /*
+ * Bit 2-1 PORTSEL[1-0] Port Select.
+ * 00 AUI/10Base-2
+ * 01 10Base-T
+ * 10 DAI Port (reserved in Am2150)
+ * 11 GPSI
+ * For this card, only the first two are valid.
+ * So, PLSCC should be set to
+ * 0x00 for 10Base-2
+ * 0x02 for 10Base-T
+ * Or just set ASEL in PHYCC below!
+ */
+ switch (if_port) {
+ case 1:
+ mace_write(lp, ioaddr, MACE_PLSCC, 0x02);
+ break;
+ case 2:
+ mace_write(lp, ioaddr, MACE_PLSCC, 0x00);
+ break;
+ default:
+ mace_write(lp, ioaddr, MACE_PHYCC, /* ASEL */ 4);
+ /* ASEL Auto Select. When set, the PORTSEL[1-0] bits are overridden,
+ and the MACE device will automatically select the operating media
+ interface port. */
+ break;
+ }
+
+ mace_write(lp, ioaddr, MACE_IAC, MACE_IAC_ADDRCHG | MACE_IAC_PHYADDR);
+ /* Poll ADDRCHG bit */
+ ct = 0;
+ while (mace_read(lp, ioaddr, MACE_IAC) & MACE_IAC_ADDRCHG)
+ {
+ if(++ ct > 500)
+ {
+ printk(KERN_ERR "mace: ADDRCHG timeout, card removed ?\n");
+ return -1;
+ }
+ }
+ /* Set PADR register */
+ for (i = 0; i < ETHER_ADDR_LEN; i++)
+ mace_write(lp, ioaddr, MACE_PADR, enet_addr[i]);
+
+ /* MAC Configuration Control Register should be written last */
+ /* Let set_multicast_list set this. */
+ /* mace_write(lp, ioaddr, MACE_MACCC, MACE_MACCC_ENXMT | MACE_MACCC_ENRCV); */
+ mace_write(lp, ioaddr, MACE_MACCC, 0x00);
+ return 0;
+} /* mace_init */
+
+/* ----------------------------------------------------------------------------
+nmclan_config
+ This routine is scheduled to run after a CARD_INSERTION event
+ is received, to configure the PCMCIA socket, and to make the
+ ethernet device available to the system.
+---------------------------------------------------------------------------- */
+
+#define CS_CHECK(fn, ret) \
+ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+
+static void nmclan_config(dev_link_t *link)
+{
+ client_handle_t handle = link->handle;
+ struct net_device *dev = link->priv;
+ mace_private *lp = netdev_priv(dev);
+ tuple_t tuple;
+ cisparse_t parse;
+ u_char buf[64];
+ int i, last_ret, last_fn;
+ kio_addr_t ioaddr;
+
+ DEBUG(0, "nmclan_config(0x%p)\n", link);
+
+ tuple.Attributes = 0;
+ tuple.TupleData = buf;
+ tuple.TupleDataMax = 64;
+ tuple.TupleOffset = 0;
+ tuple.DesiredTuple = CISTPL_CONFIG;
+ CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
+ CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
+ CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse));
+ link->conf.ConfigBase = parse.config.base;
+
+ /* Configure card */
+ link->state |= DEV_CONFIG;
+
+ CS_CHECK(RequestIO, pcmcia_request_io(handle, &link->io));
+ CS_CHECK(RequestIRQ, pcmcia_request_irq(handle, &link->irq));
+ CS_CHECK(RequestConfiguration, pcmcia_request_configuration(handle, &link->conf));
+ dev->irq = link->irq.AssignedIRQ;
+ dev->base_addr = link->io.BasePort1;
+
+ ioaddr = dev->base_addr;
+
+ /* Read the ethernet address from the CIS. */
+ tuple.DesiredTuple = 0x80 /* CISTPL_CFTABLE_ENTRY_MISC */;
+ tuple.TupleData = buf;
+ tuple.TupleDataMax = 64;
+ tuple.TupleOffset = 0;
+ CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
+ CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
+ memcpy(dev->dev_addr, tuple.TupleData, ETHER_ADDR_LEN);
+
+ /* Verify configuration by reading the MACE ID. */
+ {
+ char sig[2];
+
+ sig[0] = mace_read(lp, ioaddr, MACE_CHIPIDL);
+ sig[1] = mace_read(lp, ioaddr, MACE_CHIPIDH);
+ if ((sig[0] == 0x40) && ((sig[1] & 0x0F) == 0x09)) {
+ DEBUG(0, "nmclan_cs configured: mace id=%x %x\n",
+ sig[0], sig[1]);
+ } else {
+ printk(KERN_NOTICE "nmclan_cs: mace id not found: %x %x should"
+ " be 0x40 0x?9\n", sig[0], sig[1]);
+ link->state &= ~DEV_CONFIG_PENDING;
+ return;
+ }
+ }
+
+ if(mace_init(lp, ioaddr, dev->dev_addr) == -1)
+ goto failed;
+
+ /* The if_port symbol can be set when the module is loaded */
+ if (if_port <= 2)
+ dev->if_port = if_port;
+ else
+ printk(KERN_NOTICE "nmclan_cs: invalid if_port requested\n");
+
+ link->dev = &lp->node;
+ link->state &= ~DEV_CONFIG_PENDING;
+ SET_NETDEV_DEV(dev, &handle_to_dev(handle));
+
+ i = register_netdev(dev);
+ if (i != 0) {
+ printk(KERN_NOTICE "nmclan_cs: register_netdev() failed\n");
+ link->dev = NULL;
+ goto failed;
+ }
+
+ strcpy(lp->node.dev_name, dev->name);
+
+ printk(KERN_INFO "%s: nmclan: port %#3lx, irq %d, %s port, hw_addr ",
+ dev->name, dev->base_addr, dev->irq, if_names[dev->if_port]);
+ for (i = 0; i < 6; i++)
+ printk("%02X%s", dev->dev_addr[i], ((i<5) ? ":" : "\n"));
+ return;
+
+cs_failed:
+ cs_error(link->handle, last_fn, last_ret);
+failed:
+ nmclan_release(link);
+ return;
+
+} /* nmclan_config */
+
+/* ----------------------------------------------------------------------------
+nmclan_release
+ After a card is removed, nmclan_release() will unregister the
+ net device, and release the PCMCIA configuration. If the device
+ is still open, this will be postponed until it is closed.
+---------------------------------------------------------------------------- */
+static void nmclan_release(dev_link_t *link)
+{
+
+ DEBUG(0, "nmclan_release(0x%p)\n", link);
+
+ pcmcia_release_configuration(link->handle);
+ pcmcia_release_io(link->handle, &link->io);
+ pcmcia_release_irq(link->handle, &link->irq);
+
+ link->state &= ~DEV_CONFIG;
+}
+
+/* ----------------------------------------------------------------------------
+nmclan_event
+ The card status event handler. Mostly, this schedules other
+ stuff to run after an event is received. A CARD_REMOVAL event
+ also sets some flags to discourage the net drivers from trying
+ to talk to the card any more.
+---------------------------------------------------------------------------- */
+static int nmclan_event(event_t event, int priority,
+ event_callback_args_t *args)
+{
+ dev_link_t *link = args->client_data;
+ struct net_device *dev = link->priv;
+
+ DEBUG(1, "nmclan_event(0x%06x)\n", event);
+
+ switch (event) {
+ case CS_EVENT_CARD_REMOVAL:
+ link->state &= ~DEV_PRESENT;
+ if (link->state & DEV_CONFIG)
+ netif_device_detach(dev);
+ break;
+ case CS_EVENT_CARD_INSERTION:
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ nmclan_config(link);
+ break;
+ case CS_EVENT_PM_SUSPEND:
+ link->state |= DEV_SUSPEND;
+ /* Fall through... */
+ case CS_EVENT_RESET_PHYSICAL:
+ if (link->state & DEV_CONFIG) {
+ if (link->open)
+ netif_device_detach(dev);
+ pcmcia_release_configuration(link->handle);
+ }
+ break;
+ case CS_EVENT_PM_RESUME:
+ link->state &= ~DEV_SUSPEND;
+ /* Fall through... */
+ case CS_EVENT_CARD_RESET:
+ if (link->state & DEV_CONFIG) {
+ pcmcia_request_configuration(link->handle, &link->conf);
+ if (link->open) {
+ nmclan_reset(dev);
+ netif_device_attach(dev);
+ }
+ }
+ break;
+ case CS_EVENT_RESET_REQUEST:
+ return 1;
+ break;
+ }
+ return 0;
+} /* nmclan_event */
+
+/* ----------------------------------------------------------------------------
+nmclan_reset
+ Reset and restore all of the Xilinx and MACE registers.
+---------------------------------------------------------------------------- */
+static void nmclan_reset(struct net_device *dev)
+{
+ mace_private *lp = netdev_priv(dev);
+
+#if RESET_XILINX
+ dev_link_t *link = &lp->link;
+ conf_reg_t reg;
+ u_long OrigCorValue;
+
+ /* Save original COR value */
+ reg.Function = 0;
+ reg.Action = CS_READ;
+ reg.Offset = CISREG_COR;
+ reg.Value = 0;
+ pcmcia_access_configuration_register(link->handle, &reg);
+ OrigCorValue = reg.Value;
+
+ /* Reset Xilinx */
+ reg.Action = CS_WRITE;
+ reg.Offset = CISREG_COR;
+ DEBUG(1, "nmclan_reset: OrigCorValue=0x%lX, resetting...\n",
+ OrigCorValue);
+ reg.Value = COR_SOFT_RESET;
+ pcmcia_access_configuration_register(link->handle, &reg);
+ /* Need to wait for 20 ms for PCMCIA to finish reset. */
+
+ /* Restore original COR configuration index */
+ reg.Value = COR_LEVEL_REQ | (OrigCorValue & COR_CONFIG_MASK);
+ pcmcia_access_configuration_register(link->handle, &reg);
+ /* Xilinx is now completely reset along with the MACE chip. */
+ lp->tx_free_frames=AM2150_MAX_TX_FRAMES;
+
+#endif /* #if RESET_XILINX */
+
+ /* Xilinx is now completely reset along with the MACE chip. */
+ lp->tx_free_frames=AM2150_MAX_TX_FRAMES;
+
+ /* Reinitialize the MACE chip for operation. */
+ mace_init(lp, dev->base_addr, dev->dev_addr);
+ mace_write(lp, dev->base_addr, MACE_IMR, MACE_IMR_DEFAULT);
+
+ /* Restore the multicast list and enable TX and RX. */
+ restore_multicast_list(dev);
+} /* nmclan_reset */
+
+/* ----------------------------------------------------------------------------
+mace_config
+ [Someone tell me what this is supposed to do? Is if_port a defined
+ standard? If so, there should be defines to indicate 1=10Base-T,
+ 2=10Base-2, etc. including limited automatic detection.]
+---------------------------------------------------------------------------- */
+static int mace_config(struct net_device *dev, struct ifmap *map)
+{
+ if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) {
+ if (map->port <= 2) {
+ dev->if_port = map->port;
+ printk(KERN_INFO "%s: switched to %s port\n", dev->name,
+ if_names[dev->if_port]);
+ } else
+ return -EINVAL;
+ }
+ return 0;
+} /* mace_config */
+
+/* ----------------------------------------------------------------------------
+mace_open
+ Open device driver.
+---------------------------------------------------------------------------- */
+static int mace_open(struct net_device *dev)
+{
+ kio_addr_t ioaddr = dev->base_addr;
+ mace_private *lp = netdev_priv(dev);
+ dev_link_t *link = &lp->link;
+
+ if (!DEV_OK(link))
+ return -ENODEV;
+
+ link->open++;
+
+ MACEBANK(0);
+
+ netif_start_queue(dev);
+ nmclan_reset(dev);
+
+ return 0; /* Always succeed */
+} /* mace_open */
+
+/* ----------------------------------------------------------------------------
+mace_close
+ Closes device driver.
+---------------------------------------------------------------------------- */
+static int mace_close(struct net_device *dev)
+{
+ kio_addr_t ioaddr = dev->base_addr;
+ mace_private *lp = netdev_priv(dev);
+ dev_link_t *link = &lp->link;
+
+ DEBUG(2, "%s: shutting down ethercard.\n", dev->name);
+
+ /* Mask off all interrupts from the MACE chip. */
+ outb(0xFF, ioaddr + AM2150_MACE_BASE + MACE_IMR);
+
+ link->open--;
+ netif_stop_queue(dev);
+
+ return 0;
+} /* mace_close */
+
+static void netdev_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ sprintf(info->bus_info, "PCMCIA 0x%lx", dev->base_addr);
+}
+
+#ifdef PCMCIA_DEBUG
+static u32 netdev_get_msglevel(struct net_device *dev)
+{
+ return pc_debug;
+}
+
+static void netdev_set_msglevel(struct net_device *dev, u32 level)
+{
+ pc_debug = level;
+}
+#endif /* PCMCIA_DEBUG */
+
+static struct ethtool_ops netdev_ethtool_ops = {
+ .get_drvinfo = netdev_get_drvinfo,
+#ifdef PCMCIA_DEBUG
+ .get_msglevel = netdev_get_msglevel,
+ .set_msglevel = netdev_set_msglevel,
+#endif /* PCMCIA_DEBUG */
+};
+
+/* ----------------------------------------------------------------------------
+mace_start_xmit
+ This routine begins the packet transmit function. When completed,
+ it will generate a transmit interrupt.
+
+ According to /usr/src/linux/net/inet/dev.c, if _start_xmit
+ returns 0, the "packet is now solely the responsibility of the
+ driver." If _start_xmit returns non-zero, the "transmission
+ failed, put skb back into a list."
+---------------------------------------------------------------------------- */
+
+static void mace_tx_timeout(struct net_device *dev)
+{
+ mace_private *lp = netdev_priv(dev);
+ dev_link_t *link = &lp->link;
+
+ printk(KERN_NOTICE "%s: transmit timed out -- ", dev->name);
+#if RESET_ON_TIMEOUT
+ printk("resetting card\n");
+ pcmcia_reset_card(link->handle, NULL);
+#else /* #if RESET_ON_TIMEOUT */
+ printk("NOT resetting card\n");
+#endif /* #if RESET_ON_TIMEOUT */
+ dev->trans_start = jiffies;
+ netif_wake_queue(dev);
+}
+
+static int mace_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ mace_private *lp = netdev_priv(dev);
+ kio_addr_t ioaddr = dev->base_addr;
+
+ netif_stop_queue(dev);
+
+ DEBUG(3, "%s: mace_start_xmit(length = %ld) called.\n",
+ dev->name, (long)skb->len);
+
+#if (!TX_INTERRUPTABLE)
+ /* Disable MACE TX interrupts. */
+ outb(MACE_IMR_DEFAULT | MACE_IR_XMTINT,
+ ioaddr + AM2150_MACE_BASE + MACE_IMR);
+ lp->tx_irq_disabled=1;
+#endif /* #if (!TX_INTERRUPTABLE) */
+
+ {
+ /* This block must not be interrupted by another transmit request!
+ mace_tx_timeout will take care of timer-based retransmissions from
+ the upper layers. The interrupt handler is guaranteed never to
+ service a transmit interrupt while we are in here.
+ */
+
+ lp->linux_stats.tx_bytes += skb->len;
+ lp->tx_free_frames--;
+
+ /* WARNING: Write the _exact_ number of bytes written in the header! */
+ /* Put out the word header [must be an outw()] . . . */
+ outw(skb->len, ioaddr + AM2150_XMT);
+ /* . . . and the packet [may be any combination of outw() and outb()] */
+ outsw(ioaddr + AM2150_XMT, skb->data, skb->len >> 1);
+ if (skb->len & 1) {
+ /* Odd byte transfer */
+ outb(skb->data[skb->len-1], ioaddr + AM2150_XMT);
+ }
+
+ dev->trans_start = jiffies;
+
+#if MULTI_TX
+ if (lp->tx_free_frames > 0)
+ netif_start_queue(dev);
+#endif /* #if MULTI_TX */
+ }
+
+#if (!TX_INTERRUPTABLE)
+ /* Re-enable MACE TX interrupts. */
+ lp->tx_irq_disabled=0;
+ outb(MACE_IMR_DEFAULT, ioaddr + AM2150_MACE_BASE + MACE_IMR);
+#endif /* #if (!TX_INTERRUPTABLE) */
+
+ dev_kfree_skb(skb);
+
+ return 0;
+} /* mace_start_xmit */
+
+/* ----------------------------------------------------------------------------
+mace_interrupt
+ The interrupt handler.
+---------------------------------------------------------------------------- */
+static irqreturn_t mace_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = (struct net_device *) dev_id;
+ mace_private *lp = netdev_priv(dev);
+ kio_addr_t ioaddr = dev->base_addr;
+ int status;
+ int IntrCnt = MACE_MAX_IR_ITERATIONS;
+
+ if (dev == NULL) {
+ DEBUG(2, "mace_interrupt(): irq 0x%X for unknown device.\n",
+ irq);
+ return IRQ_NONE;
+ }
+
+ if (lp->tx_irq_disabled) {
+ printk(
+ (lp->tx_irq_disabled?
+ KERN_NOTICE "%s: Interrupt with tx_irq_disabled "
+ "[isr=%02X, imr=%02X]\n":
+ KERN_NOTICE "%s: Re-entering the interrupt handler "
+ "[isr=%02X, imr=%02X]\n"),
+ dev->name,
+ inb(ioaddr + AM2150_MACE_BASE + MACE_IR),
+ inb(ioaddr + AM2150_MACE_BASE + MACE_IMR)
+ );
+ /* WARNING: MACE_IR has been read! */
+ return IRQ_NONE;
+ }
+
+ if (!netif_device_present(dev)) {
+ DEBUG(2, "%s: interrupt from dead card\n", dev->name);
+ return IRQ_NONE;
+ }
+
+ do {
+ /* WARNING: MACE_IR is a READ/CLEAR port! */
+ status = inb(ioaddr + AM2150_MACE_BASE + MACE_IR);
+
+ DEBUG(3, "mace_interrupt: irq 0x%X status 0x%X.\n", irq, status);
+
+ if (status & MACE_IR_RCVINT) {
+ mace_rx(dev, MACE_MAX_RX_ITERATIONS);
+ }
+
+ if (status & MACE_IR_XMTINT) {
+ unsigned char fifofc;
+ unsigned char xmtrc;
+ unsigned char xmtfs;
+
+ fifofc = inb(ioaddr + AM2150_MACE_BASE + MACE_FIFOFC);
+ if ((fifofc & MACE_FIFOFC_XMTFC)==0) {
+ lp->linux_stats.tx_errors++;
+ outb(0xFF, ioaddr + AM2150_XMT_SKIP);
+ }
+
+ /* Transmit Retry Count (XMTRC, reg 4) */
+ xmtrc = inb(ioaddr + AM2150_MACE_BASE + MACE_XMTRC);
+ if (xmtrc & MACE_XMTRC_EXDEF) lp->mace_stats.exdef++;
+ lp->mace_stats.xmtrc += (xmtrc & MACE_XMTRC_XMTRC);
+
+ if (
+ (xmtfs = inb(ioaddr + AM2150_MACE_BASE + MACE_XMTFS)) &
+ MACE_XMTFS_XMTSV /* Transmit Status Valid */
+ ) {
+ lp->mace_stats.xmtsv++;
+
+ if (xmtfs & ~MACE_XMTFS_XMTSV) {
+ if (xmtfs & MACE_XMTFS_UFLO) {
+ /* Underflow. Indicates that the Transmit FIFO emptied before
+ the end of frame was reached. */
+ lp->mace_stats.uflo++;
+ }
+ if (xmtfs & MACE_XMTFS_LCOL) {
+ /* Late Collision */
+ lp->mace_stats.lcol++;
+ }
+ if (xmtfs & MACE_XMTFS_MORE) {
+ /* MORE than one retry was needed */
+ lp->mace_stats.more++;
+ }
+ if (xmtfs & MACE_XMTFS_ONE) {
+ /* Exactly ONE retry occurred */
+ lp->mace_stats.one++;
+ }
+ if (xmtfs & MACE_XMTFS_DEFER) {
+ /* Transmission was defered */
+ lp->mace_stats.defer++;
+ }
+ if (xmtfs & MACE_XMTFS_LCAR) {
+ /* Loss of carrier */
+ lp->mace_stats.lcar++;
+ }
+ if (xmtfs & MACE_XMTFS_RTRY) {
+ /* Retry error: transmit aborted after 16 attempts */
+ lp->mace_stats.rtry++;
+ }
+ } /* if (xmtfs & ~MACE_XMTFS_XMTSV) */
+
+ } /* if (xmtfs & MACE_XMTFS_XMTSV) */
+
+ lp->linux_stats.tx_packets++;
+ lp->tx_free_frames++;
+ netif_wake_queue(dev);
+ } /* if (status & MACE_IR_XMTINT) */
+
+ if (status & ~MACE_IMR_DEFAULT & ~MACE_IR_RCVINT & ~MACE_IR_XMTINT) {
+ if (status & MACE_IR_JAB) {
+ /* Jabber Error. Excessive transmit duration (20-150ms). */
+ lp->mace_stats.jab++;
+ }
+ if (status & MACE_IR_BABL) {
+ /* Babble Error. >1518 bytes transmitted. */
+ lp->mace_stats.babl++;
+ }
+ if (status & MACE_IR_CERR) {
+ /* Collision Error. CERR indicates the absence of the
+ Signal Quality Error Test message after a packet
+ transmission. */
+ lp->mace_stats.cerr++;
+ }
+ if (status & MACE_IR_RCVCCO) {
+ /* Receive Collision Count Overflow; */
+ lp->mace_stats.rcvcco++;
+ }
+ if (status & MACE_IR_RNTPCO) {
+ /* Runt Packet Count Overflow */
+ lp->mace_stats.rntpco++;
+ }
+ if (status & MACE_IR_MPCO) {
+ /* Missed Packet Count Overflow */
+ lp->mace_stats.mpco++;
+ }
+ } /* if (status & ~MACE_IMR_DEFAULT & ~MACE_IR_RCVINT & ~MACE_IR_XMTINT) */
+
+ } while ((status & ~MACE_IMR_DEFAULT) && (--IntrCnt));
+
+ return IRQ_HANDLED;
+} /* mace_interrupt */
+
+/* ----------------------------------------------------------------------------
+mace_rx
+ Receives packets.
+---------------------------------------------------------------------------- */
+static int mace_rx(struct net_device *dev, unsigned char RxCnt)
+{
+ mace_private *lp = netdev_priv(dev);
+ kio_addr_t ioaddr = dev->base_addr;
+ unsigned char rx_framecnt;
+ unsigned short rx_status;
+
+ while (
+ ((rx_framecnt = inb(ioaddr + AM2150_RCV_FRAME_COUNT)) > 0) &&
+ (rx_framecnt <= 12) && /* rx_framecnt==0xFF if card is extracted. */
+ (RxCnt--)
+ ) {
+ rx_status = inw(ioaddr + AM2150_RCV);
+
+ DEBUG(3, "%s: in mace_rx(), framecnt 0x%X, rx_status"
+ " 0x%X.\n", dev->name, rx_framecnt, rx_status);
+
+ if (rx_status & MACE_RCVFS_RCVSTS) { /* Error, update stats. */
+ lp->linux_stats.rx_errors++;
+ if (rx_status & MACE_RCVFS_OFLO) {
+ lp->mace_stats.oflo++;
+ }
+ if (rx_status & MACE_RCVFS_CLSN) {
+ lp->mace_stats.clsn++;
+ }
+ if (rx_status & MACE_RCVFS_FRAM) {
+ lp->mace_stats.fram++;
+ }
+ if (rx_status & MACE_RCVFS_FCS) {
+ lp->mace_stats.fcs++;
+ }
+ } else {
+ short pkt_len = (rx_status & ~MACE_RCVFS_RCVSTS) - 4;
+ /* Auto Strip is off, always subtract 4 */
+ struct sk_buff *skb;
+
+ lp->mace_stats.rfs_rntpc += inb(ioaddr + AM2150_RCV);
+ /* runt packet count */
+ lp->mace_stats.rfs_rcvcc += inb(ioaddr + AM2150_RCV);
+ /* rcv collision count */
+
+ DEBUG(3, " receiving packet size 0x%X rx_status"
+ " 0x%X.\n", pkt_len, rx_status);
+
+ skb = dev_alloc_skb(pkt_len+2);
+
+ if (skb != NULL) {
+ skb->dev = dev;
+
+ skb_reserve(skb, 2);
+ insw(ioaddr + AM2150_RCV, skb_put(skb, pkt_len), pkt_len>>1);
+ if (pkt_len & 1)
+ *(skb->tail-1) = inb(ioaddr + AM2150_RCV);
+ skb->protocol = eth_type_trans(skb, dev);
+
+ netif_rx(skb); /* Send the packet to the upper (protocol) layers. */
+
+ dev->last_rx = jiffies;
+ lp->linux_stats.rx_packets++;
+ lp->linux_stats.rx_bytes += skb->len;
+ outb(0xFF, ioaddr + AM2150_RCV_NEXT); /* skip to next frame */
+ continue;
+ } else {
+ DEBUG(1, "%s: couldn't allocate a sk_buff of size"
+ " %d.\n", dev->name, pkt_len);
+ lp->linux_stats.rx_dropped++;
+ }
+ }
+ outb(0xFF, ioaddr + AM2150_RCV_NEXT); /* skip to next frame */
+ } /* while */
+
+ return 0;
+} /* mace_rx */
+
+/* ----------------------------------------------------------------------------
+pr_linux_stats
+---------------------------------------------------------------------------- */
+static void pr_linux_stats(struct net_device_stats *pstats)
+{
+ DEBUG(2, "pr_linux_stats\n");
+ DEBUG(2, " rx_packets=%-7ld tx_packets=%ld\n",
+ (long)pstats->rx_packets, (long)pstats->tx_packets);
+ DEBUG(2, " rx_errors=%-7ld tx_errors=%ld\n",
+ (long)pstats->rx_errors, (long)pstats->tx_errors);
+ DEBUG(2, " rx_dropped=%-7ld tx_dropped=%ld\n",
+ (long)pstats->rx_dropped, (long)pstats->tx_dropped);
+ DEBUG(2, " multicast=%-7ld collisions=%ld\n",
+ (long)pstats->multicast, (long)pstats->collisions);
+
+ DEBUG(2, " rx_length_errors=%-7ld rx_over_errors=%ld\n",
+ (long)pstats->rx_length_errors, (long)pstats->rx_over_errors);
+ DEBUG(2, " rx_crc_errors=%-7ld rx_frame_errors=%ld\n",
+ (long)pstats->rx_crc_errors, (long)pstats->rx_frame_errors);
+ DEBUG(2, " rx_fifo_errors=%-7ld rx_missed_errors=%ld\n",
+ (long)pstats->rx_fifo_errors, (long)pstats->rx_missed_errors);
+
+ DEBUG(2, " tx_aborted_errors=%-7ld tx_carrier_errors=%ld\n",
+ (long)pstats->tx_aborted_errors, (long)pstats->tx_carrier_errors);
+ DEBUG(2, " tx_fifo_errors=%-7ld tx_heartbeat_errors=%ld\n",
+ (long)pstats->tx_fifo_errors, (long)pstats->tx_heartbeat_errors);
+ DEBUG(2, " tx_window_errors=%ld\n",
+ (long)pstats->tx_window_errors);
+} /* pr_linux_stats */
+
+/* ----------------------------------------------------------------------------
+pr_mace_stats
+---------------------------------------------------------------------------- */
+static void pr_mace_stats(mace_statistics *pstats)
+{
+ DEBUG(2, "pr_mace_stats\n");
+
+ DEBUG(2, " xmtsv=%-7d uflo=%d\n",
+ pstats->xmtsv, pstats->uflo);
+ DEBUG(2, " lcol=%-7d more=%d\n",
+ pstats->lcol, pstats->more);
+ DEBUG(2, " one=%-7d defer=%d\n",
+ pstats->one, pstats->defer);
+ DEBUG(2, " lcar=%-7d rtry=%d\n",
+ pstats->lcar, pstats->rtry);
+
+ /* MACE_XMTRC */
+ DEBUG(2, " exdef=%-7d xmtrc=%d\n",
+ pstats->exdef, pstats->xmtrc);
+
+ /* RFS1--Receive Status (RCVSTS) */
+ DEBUG(2, " oflo=%-7d clsn=%d\n",
+ pstats->oflo, pstats->clsn);
+ DEBUG(2, " fram=%-7d fcs=%d\n",
+ pstats->fram, pstats->fcs);
+
+ /* RFS2--Runt Packet Count (RNTPC) */
+ /* RFS3--Receive Collision Count (RCVCC) */
+ DEBUG(2, " rfs_rntpc=%-7d rfs_rcvcc=%d\n",
+ pstats->rfs_rntpc, pstats->rfs_rcvcc);
+
+ /* MACE_IR */
+ DEBUG(2, " jab=%-7d babl=%d\n",
+ pstats->jab, pstats->babl);
+ DEBUG(2, " cerr=%-7d rcvcco=%d\n",
+ pstats->cerr, pstats->rcvcco);
+ DEBUG(2, " rntpco=%-7d mpco=%d\n",
+ pstats->rntpco, pstats->mpco);
+
+ /* MACE_MPC */
+ DEBUG(2, " mpc=%d\n", pstats->mpc);
+
+ /* MACE_RNTPC */
+ DEBUG(2, " rntpc=%d\n", pstats->rntpc);
+
+ /* MACE_RCVCC */
+ DEBUG(2, " rcvcc=%d\n", pstats->rcvcc);
+
+} /* pr_mace_stats */
+
+/* ----------------------------------------------------------------------------
+update_stats
+ Update statistics. We change to register window 1, so this
+ should be run single-threaded if the device is active. This is
+ expected to be a rare operation, and it's simpler for the rest
+ of the driver to assume that window 0 is always valid rather
+ than use a special window-state variable.
+
+ oflo & uflo should _never_ occur since it would mean the Xilinx
+ was not able to transfer data between the MACE FIFO and the
+ card's SRAM fast enough. If this happens, something is
+ seriously wrong with the hardware.
+---------------------------------------------------------------------------- */
+static void update_stats(kio_addr_t ioaddr, struct net_device *dev)
+{
+ mace_private *lp = netdev_priv(dev);
+
+ lp->mace_stats.rcvcc += mace_read(lp, ioaddr, MACE_RCVCC);
+ lp->mace_stats.rntpc += mace_read(lp, ioaddr, MACE_RNTPC);
+ lp->mace_stats.mpc += mace_read(lp, ioaddr, MACE_MPC);
+ /* At this point, mace_stats is fully updated for this call.
+ We may now update the linux_stats. */
+
+ /* The MACE has no equivalent for linux_stats field which are commented
+ out. */
+
+ /* lp->linux_stats.multicast; */
+ lp->linux_stats.collisions =
+ lp->mace_stats.rcvcco * 256 + lp->mace_stats.rcvcc;
+ /* Collision: The MACE may retry sending a packet 15 times
+ before giving up. The retry count is in XMTRC.
+ Does each retry constitute a collision?
+ If so, why doesn't the RCVCC record these collisions? */
+
+ /* detailed rx_errors: */
+ lp->linux_stats.rx_length_errors =
+ lp->mace_stats.rntpco * 256 + lp->mace_stats.rntpc;
+ /* lp->linux_stats.rx_over_errors */
+ lp->linux_stats.rx_crc_errors = lp->mace_stats.fcs;
+ lp->linux_stats.rx_frame_errors = lp->mace_stats.fram;
+ lp->linux_stats.rx_fifo_errors = lp->mace_stats.oflo;
+ lp->linux_stats.rx_missed_errors =
+ lp->mace_stats.mpco * 256 + lp->mace_stats.mpc;
+
+ /* detailed tx_errors */
+ lp->linux_stats.tx_aborted_errors = lp->mace_stats.rtry;
+ lp->linux_stats.tx_carrier_errors = lp->mace_stats.lcar;
+ /* LCAR usually results from bad cabling. */
+ lp->linux_stats.tx_fifo_errors = lp->mace_stats.uflo;
+ lp->linux_stats.tx_heartbeat_errors = lp->mace_stats.cerr;
+ /* lp->linux_stats.tx_window_errors; */
+
+ return;
+} /* update_stats */
+
+/* ----------------------------------------------------------------------------
+mace_get_stats
+ Gathers ethernet statistics from the MACE chip.
+---------------------------------------------------------------------------- */
+static struct net_device_stats *mace_get_stats(struct net_device *dev)
+{
+ mace_private *lp = netdev_priv(dev);
+
+ update_stats(dev->base_addr, dev);
+
+ DEBUG(1, "%s: updating the statistics.\n", dev->name);
+ pr_linux_stats(&lp->linux_stats);
+ pr_mace_stats(&lp->mace_stats);
+
+ return &lp->linux_stats;
+} /* net_device_stats */
+
+/* ----------------------------------------------------------------------------
+updateCRC
+ Modified from Am79C90 data sheet.
+---------------------------------------------------------------------------- */
+
+#ifdef BROKEN_MULTICAST
+
+static void updateCRC(int *CRC, int bit)
+{
+ int poly[]={
+ 1,1,1,0, 1,1,0,1,
+ 1,0,1,1, 1,0,0,0,
+ 1,0,0,0, 0,0,1,1,
+ 0,0,1,0, 0,0,0,0
+ }; /* CRC polynomial. poly[n] = coefficient of the x**n term of the
+ CRC generator polynomial. */
+
+ int j;
+
+ /* shift CRC and control bit (CRC[32]) */
+ for (j = 32; j > 0; j--)
+ CRC[j] = CRC[j-1];
+ CRC[0] = 0;
+
+ /* If bit XOR(control bit) = 1, set CRC = CRC XOR polynomial. */
+ if (bit ^ CRC[32])
+ for (j = 0; j < 32; j++)
+ CRC[j] ^= poly[j];
+} /* updateCRC */
+
+/* ----------------------------------------------------------------------------
+BuildLAF
+ Build logical address filter.
+ Modified from Am79C90 data sheet.
+
+Input
+ ladrf: logical address filter (contents initialized to 0)
+ adr: ethernet address
+---------------------------------------------------------------------------- */
+static void BuildLAF(int *ladrf, int *adr)
+{
+ int CRC[33]={1}; /* CRC register, 1 word/bit + extra control bit */
+
+ int i, byte; /* temporary array indices */
+ int hashcode; /* the output object */
+
+ CRC[32]=0;
+
+ for (byte = 0; byte < 6; byte++)
+ for (i = 0; i < 8; i++)
+ updateCRC(CRC, (adr[byte] >> i) & 1);
+
+ hashcode = 0;
+ for (i = 0; i < 6; i++)
+ hashcode = (hashcode << 1) + CRC[i];
+
+ byte = hashcode >> 3;
+ ladrf[byte] |= (1 << (hashcode & 7));
+
+#ifdef PCMCIA_DEBUG
+ if (pc_debug > 2) {
+ printk(KERN_DEBUG " adr =");
+ for (i = 0; i < 6; i++)
+ printk(" %02X", adr[i]);
+ printk("\n" KERN_DEBUG " hashcode = %d(decimal), ladrf[0:63]"
+ " =", hashcode);
+ for (i = 0; i < 8; i++)
+ printk(" %02X", ladrf[i]);
+ printk("\n");
+ }
+#endif
+} /* BuildLAF */
+
+/* ----------------------------------------------------------------------------
+restore_multicast_list
+ Restores the multicast filter for MACE chip to the last
+ set_multicast_list() call.
+
+Input
+ multicast_num_addrs
+ multicast_ladrf[]
+---------------------------------------------------------------------------- */
+static void restore_multicast_list(struct net_device *dev)
+{
+ mace_private *lp = netdev_priv(dev);
+ int num_addrs = lp->multicast_num_addrs;
+ int *ladrf = lp->multicast_ladrf;
+ kio_addr_t ioaddr = dev->base_addr;
+ int i;
+
+ DEBUG(2, "%s: restoring Rx mode to %d addresses.\n",
+ dev->name, num_addrs);
+
+ if (num_addrs > 0) {
+
+ DEBUG(1, "Attempt to restore multicast list detected.\n");
+
+ mace_write(lp, ioaddr, MACE_IAC, MACE_IAC_ADDRCHG | MACE_IAC_LOGADDR);
+ /* Poll ADDRCHG bit */
+ while (mace_read(lp, ioaddr, MACE_IAC) & MACE_IAC_ADDRCHG)
+ ;
+ /* Set LADRF register */
+ for (i = 0; i < MACE_LADRF_LEN; i++)
+ mace_write(lp, ioaddr, MACE_LADRF, ladrf[i]);
+
+ mace_write(lp, ioaddr, MACE_UTR, MACE_UTR_RCVFCSE | MACE_UTR_LOOP_EXTERNAL);
+ mace_write(lp, ioaddr, MACE_MACCC, MACE_MACCC_ENXMT | MACE_MACCC_ENRCV);
+
+ } else if (num_addrs < 0) {
+
+ /* Promiscuous mode: receive all packets */
+ mace_write(lp, ioaddr, MACE_UTR, MACE_UTR_LOOP_EXTERNAL);
+ mace_write(lp, ioaddr, MACE_MACCC,
+ MACE_MACCC_PROM | MACE_MACCC_ENXMT | MACE_MACCC_ENRCV
+ );
+
+ } else {
+
+ /* Normal mode */
+ mace_write(lp, ioaddr, MACE_UTR, MACE_UTR_LOOP_EXTERNAL);
+ mace_write(lp, ioaddr, MACE_MACCC, MACE_MACCC_ENXMT | MACE_MACCC_ENRCV);
+
+ }
+} /* restore_multicast_list */
+
+/* ----------------------------------------------------------------------------
+set_multicast_list
+ Set or clear the multicast filter for this adaptor.
+
+Input
+ num_addrs == -1 Promiscuous mode, receive all packets
+ num_addrs == 0 Normal mode, clear multicast list
+ num_addrs > 0 Multicast mode, receive normal and MC packets, and do
+ best-effort filtering.
+Output
+ multicast_num_addrs
+ multicast_ladrf[]
+---------------------------------------------------------------------------- */
+
+static void set_multicast_list(struct net_device *dev)
+{
+ mace_private *lp = netdev_priv(dev);
+ int adr[ETHER_ADDR_LEN] = {0}; /* Ethernet address */
+ int i;
+ struct dev_mc_list *dmi = dev->mc_list;
+
+#ifdef PCMCIA_DEBUG
+ if (pc_debug > 1) {
+ static int old;
+ if (dev->mc_count != old) {
+ old = dev->mc_count;
+ DEBUG(0, "%s: setting Rx mode to %d addresses.\n",
+ dev->name, old);
+ }
+ }
+#endif
+
+ /* Set multicast_num_addrs. */
+ lp->multicast_num_addrs = dev->mc_count;
+
+ /* Set multicast_ladrf. */
+ if (num_addrs > 0) {
+ /* Calculate multicast logical address filter */
+ memset(lp->multicast_ladrf, 0, MACE_LADRF_LEN);
+ for (i = 0; i < dev->mc_count; i++) {
+ memcpy(adr, dmi->dmi_addr, ETHER_ADDR_LEN);
+ dmi = dmi->next;
+ BuildLAF(lp->multicast_ladrf, adr);
+ }
+ }
+
+ restore_multicast_list(dev);
+
+} /* set_multicast_list */
+
+#endif /* BROKEN_MULTICAST */
+
+static void restore_multicast_list(struct net_device *dev)
+{
+ kio_addr_t ioaddr = dev->base_addr;
+ mace_private *lp = netdev_priv(dev);
+
+ DEBUG(2, "%s: restoring Rx mode to %d addresses.\n", dev->name,
+ lp->multicast_num_addrs);
+
+ if (dev->flags & IFF_PROMISC) {
+ /* Promiscuous mode: receive all packets */
+ mace_write(lp,ioaddr, MACE_UTR, MACE_UTR_LOOP_EXTERNAL);
+ mace_write(lp, ioaddr, MACE_MACCC,
+ MACE_MACCC_PROM | MACE_MACCC_ENXMT | MACE_MACCC_ENRCV
+ );
+ } else {
+ /* Normal mode */
+ mace_write(lp, ioaddr, MACE_UTR, MACE_UTR_LOOP_EXTERNAL);
+ mace_write(lp, ioaddr, MACE_MACCC, MACE_MACCC_ENXMT | MACE_MACCC_ENRCV);
+ }
+} /* restore_multicast_list */
+
+static void set_multicast_list(struct net_device *dev)
+{
+ mace_private *lp = netdev_priv(dev);
+
+#ifdef PCMCIA_DEBUG
+ if (pc_debug > 1) {
+ static int old;
+ if (dev->mc_count != old) {
+ old = dev->mc_count;
+ DEBUG(0, "%s: setting Rx mode to %d addresses.\n",
+ dev->name, old);
+ }
+ }
+#endif
+
+ lp->multicast_num_addrs = dev->mc_count;
+ restore_multicast_list(dev);
+
+} /* set_multicast_list */
+
+static struct pcmcia_driver nmclan_cs_driver = {
+ .owner = THIS_MODULE,
+ .drv = {
+ .name = "nmclan_cs",
+ },
+ .attach = nmclan_attach,
+ .detach = nmclan_detach,
+};
+
+static int __init init_nmclan_cs(void)
+{
+ return pcmcia_register_driver(&nmclan_cs_driver);
+}
+
+static void __exit exit_nmclan_cs(void)
+{
+ pcmcia_unregister_driver(&nmclan_cs_driver);
+ BUG_ON(dev_list != NULL);
+}
+
+module_init(init_nmclan_cs);
+module_exit(exit_nmclan_cs);
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-28 09:38:05 +0000