diff options
Diffstat (limited to 'drivers/net/pcmcia/axnet_cs.c')
| -rw-r--r-- | drivers/net/pcmcia/axnet_cs.c | 48 |
1 files changed, 24 insertions, 24 deletions
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index 33525bf2a3d..5f05ffb240c 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -39,7 +39,6 @@ #include <linux/mii.h> #include "../8390.h" -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> @@ -260,28 +259,30 @@ static int get_prom(struct pcmcia_device *link) static int try_io_port(struct pcmcia_device *link) { int j, ret; - if (link->io.NumPorts1 == 32) { - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + link->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + link->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + if (link->resource[0]->end == 32) { + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; /* for master/slave multifunction cards */ - if (link->io.NumPorts2 > 0) - link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; + if (link->resource[1]->end > 0) + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; } else { /* This should be two 16-port windows */ - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.Attributes2 = IO_DATA_PATH_WIDTH_16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_16; } - if (link->io.BasePort1 == 0) { - link->io.IOAddrLines = 16; + if (link->resource[0]->start == 0) { for (j = 0; j < 0x400; j += 0x20) { - link->io.BasePort1 = j ^ 0x300; - link->io.BasePort2 = (j ^ 0x300) + 0x10; - ret = pcmcia_request_io(link, &link->io); + link->resource[0]->start = j ^ 0x300; + link->resource[1]->start = (j ^ 0x300) + 0x10; + link->io_lines = 16; + ret = pcmcia_request_io(link); if (ret == 0) return ret; } return ret; } else { - return pcmcia_request_io(link, &link->io); + return pcmcia_request_io(link); } } @@ -302,15 +303,15 @@ static int axnet_configcheck(struct pcmcia_device *p_dev, network function with window 0, and serial with window 1 */ if (io->nwin > 1) { i = (io->win[1].len > io->win[0].len); - p_dev->io.BasePort2 = io->win[1-i].base; - p_dev->io.NumPorts2 = io->win[1-i].len; + p_dev->resource[1]->start = io->win[1-i].base; + p_dev->resource[1]->end = io->win[1-i].len; } else { - i = p_dev->io.NumPorts2 = 0; + i = p_dev->resource[1]->end = 0; } - p_dev->io.BasePort1 = io->win[i].base; - p_dev->io.NumPorts1 = io->win[i].len; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - if (p_dev->io.NumPorts1 + p_dev->io.NumPorts2 >= 32) + p_dev->resource[0]->start = io->win[i].base; + p_dev->resource[0]->end = io->win[i].len; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32) return try_io_port(p_dev); return -ENODEV; @@ -333,7 +334,7 @@ static int axnet_config(struct pcmcia_device *link) if (!link->irq) goto failed; - if (link->io.NumPorts2 == 8) { + if (resource_size(link->resource[1]) == 8) { link->conf.Attributes |= CONF_ENABLE_SPKR; link->conf.Status = CCSR_AUDIO_ENA; } @@ -343,7 +344,7 @@ static int axnet_config(struct pcmcia_device *link) goto failed; dev->irq = link->irq; - dev->base_addr = link->io.BasePort1; + dev->base_addr = link->resource[0]->start; if (!get_prom(link)) { printk(KERN_NOTICE "axnet_cs: this is not an AX88190 card!\n"); @@ -379,8 +380,7 @@ static int axnet_config(struct pcmcia_device *link) /* Maybe PHY is in power down mode. (PPD_SET = 1) Bit 2 of CCSR is active low. */ if (i == 32) { - conf_reg_t reg = { 0, CS_WRITE, CISREG_CCSR, 0x04 }; - pcmcia_access_configuration_register(link, ®); + pcmcia_write_config_byte(link, CISREG_CCSR, 0x04); for (i = 0; i < 32; i++) { j = mdio_read(dev->base_addr + AXNET_MII_EEP, i, 1); j2 = mdio_read(dev->base_addr + AXNET_MII_EEP, i, 2); |