aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ixgbevf/vf.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ixgbevf/vf.c')
-rw-r--r--drivers/net/ixgbevf/vf.c387
1 files changed, 387 insertions, 0 deletions
diff --git a/drivers/net/ixgbevf/vf.c b/drivers/net/ixgbevf/vf.c
new file mode 100644
index 00000000000..4b5dec0ec14
--- /dev/null
+++ b/drivers/net/ixgbevf/vf.c
@@ -0,0 +1,387 @@
+/*******************************************************************************
+
+ Intel 82599 Virtual Function driver
+ Copyright(c) 1999 - 2009 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "vf.h"
+
+/**
+ * ixgbevf_start_hw_vf - Prepare hardware for Tx/Rx
+ * @hw: pointer to hardware structure
+ *
+ * Starts the hardware by filling the bus info structure and media type, clears
+ * all on chip counters, initializes receive address registers, multicast
+ * table, VLAN filter table, calls routine to set up link and flow control
+ * settings, and leaves transmit and receive units disabled and uninitialized
+ **/
+static s32 ixgbevf_start_hw_vf(struct ixgbe_hw *hw)
+{
+ /* Clear adapter stopped flag */
+ hw->adapter_stopped = false;
+
+ return 0;
+}
+
+/**
+ * ixgbevf_init_hw_vf - virtual function hardware initialization
+ * @hw: pointer to hardware structure
+ *
+ * Initialize the hardware by resetting the hardware and then starting
+ * the hardware
+ **/
+static s32 ixgbevf_init_hw_vf(struct ixgbe_hw *hw)
+{
+ s32 status = hw->mac.ops.start_hw(hw);
+
+ hw->mac.ops.get_mac_addr(hw, hw->mac.addr);
+
+ return status;
+}
+
+/**
+ * ixgbevf_reset_hw_vf - Performs hardware reset
+ * @hw: pointer to hardware structure
+ *
+ * Resets the hardware by reseting the transmit and receive units, masks and
+ * clears all interrupts.
+ **/
+static s32 ixgbevf_reset_hw_vf(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ u32 timeout = IXGBE_VF_INIT_TIMEOUT;
+ s32 ret_val = IXGBE_ERR_INVALID_MAC_ADDR;
+ u32 msgbuf[IXGBE_VF_PERMADDR_MSG_LEN];
+ u8 *addr = (u8 *)(&msgbuf[1]);
+
+ /* Call adapter stop to disable tx/rx and clear interrupts */
+ hw->mac.ops.stop_adapter(hw);
+
+ IXGBE_WRITE_REG(hw, IXGBE_VFCTRL, IXGBE_CTRL_RST);
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* we cannot reset while the RSTI / RSTD bits are asserted */
+ while (!mbx->ops.check_for_rst(hw) && timeout) {
+ timeout--;
+ udelay(5);
+ }
+
+ if (!timeout)
+ return IXGBE_ERR_RESET_FAILED;
+
+ /* mailbox timeout can now become active */
+ mbx->timeout = IXGBE_VF_MBX_INIT_TIMEOUT;
+
+ msgbuf[0] = IXGBE_VF_RESET;
+ mbx->ops.write_posted(hw, msgbuf, 1);
+
+ msleep(10);
+
+ /* set our "perm_addr" based on info provided by PF */
+ /* also set up the mc_filter_type which is piggy backed
+ * on the mac address in word 3 */
+ ret_val = mbx->ops.read_posted(hw, msgbuf, IXGBE_VF_PERMADDR_MSG_LEN);
+ if (ret_val)
+ return ret_val;
+
+ if (msgbuf[0] != (IXGBE_VF_RESET | IXGBE_VT_MSGTYPE_ACK))
+ return IXGBE_ERR_INVALID_MAC_ADDR;
+
+ memcpy(hw->mac.perm_addr, addr, IXGBE_ETH_LENGTH_OF_ADDRESS);
+ hw->mac.mc_filter_type = msgbuf[IXGBE_VF_MC_TYPE_WORD];
+
+ return 0;
+}
+
+/**
+ * ixgbevf_stop_hw_vf - Generic stop Tx/Rx units
+ * @hw: pointer to hardware structure
+ *
+ * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts,
+ * disables transmit and receive units. The adapter_stopped flag is used by
+ * the shared code and drivers to determine if the adapter is in a stopped
+ * state and should not touch the hardware.
+ **/
+static s32 ixgbevf_stop_hw_vf(struct ixgbe_hw *hw)
+{
+ u32 number_of_queues;
+ u32 reg_val;
+ u16 i;
+
+ /*
+ * Set the adapter_stopped flag so other driver functions stop touching
+ * the hardware
+ */
+ hw->adapter_stopped = true;
+
+ /* Disable the receive unit by stopped each queue */
+ number_of_queues = hw->mac.max_rx_queues;
+ for (i = 0; i < number_of_queues; i++) {
+ reg_val = IXGBE_READ_REG(hw, IXGBE_VFRXDCTL(i));
+ if (reg_val & IXGBE_RXDCTL_ENABLE) {
+ reg_val &= ~IXGBE_RXDCTL_ENABLE;
+ IXGBE_WRITE_REG(hw, IXGBE_VFRXDCTL(i), reg_val);
+ }
+ }
+
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* Clear interrupt mask to stop from interrupts being generated */
+ IXGBE_WRITE_REG(hw, IXGBE_VTEIMC, IXGBE_VF_IRQ_CLEAR_MASK);
+
+ /* Clear any pending interrupts */
+ IXGBE_READ_REG(hw, IXGBE_VTEICR);
+
+ /* Disable the transmit unit. Each queue must be disabled. */
+ number_of_queues = hw->mac.max_tx_queues;
+ for (i = 0; i < number_of_queues; i++) {
+ reg_val = IXGBE_READ_REG(hw, IXGBE_VFTXDCTL(i));
+ if (reg_val & IXGBE_TXDCTL_ENABLE) {
+ reg_val &= ~IXGBE_TXDCTL_ENABLE;
+ IXGBE_WRITE_REG(hw, IXGBE_VFTXDCTL(i), reg_val);
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * ixgbevf_mta_vector - Determines bit-vector in multicast table to set
+ * @hw: pointer to hardware structure
+ * @mc_addr: the multicast address
+ *
+ * Extracts the 12 bits, from a multicast address, to determine which
+ * bit-vector to set in the multicast table. The hardware uses 12 bits, from
+ * incoming rx multicast addresses, to determine the bit-vector to check in
+ * the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set
+ * by the MO field of the MCSTCTRL. The MO field is set during initialization
+ * to mc_filter_type.
+ **/
+static s32 ixgbevf_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr)
+{
+ u32 vector = 0;
+
+ switch (hw->mac.mc_filter_type) {
+ case 0: /* use bits [47:36] of the address */
+ vector = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4));
+ break;
+ case 1: /* use bits [46:35] of the address */
+ vector = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5));
+ break;
+ case 2: /* use bits [45:34] of the address */
+ vector = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6));
+ break;
+ case 3: /* use bits [43:32] of the address */
+ vector = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8));
+ break;
+ default: /* Invalid mc_filter_type */
+ break;
+ }
+
+ /* vector can only be 12-bits or boundary will be exceeded */
+ vector &= 0xFFF;
+ return vector;
+}
+
+/**
+ * ixgbevf_get_mac_addr_vf - Read device MAC address
+ * @hw: pointer to the HW structure
+ * @mac_addr: pointer to storage for retrieved MAC address
+ **/
+static s32 ixgbevf_get_mac_addr_vf(struct ixgbe_hw *hw, u8 *mac_addr)
+{
+ memcpy(mac_addr, hw->mac.perm_addr, IXGBE_ETH_LENGTH_OF_ADDRESS);
+
+ return 0;
+}
+
+/**
+ * ixgbevf_set_rar_vf - set device MAC address
+ * @hw: pointer to hardware structure
+ * @index: Receive address register to write
+ * @addr: Address to put into receive address register
+ * @vmdq: Unused in this implementation
+ **/
+static s32 ixgbevf_set_rar_vf(struct ixgbe_hw *hw, u32 index, u8 *addr,
+ u32 vmdq)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ u32 msgbuf[3];
+ u8 *msg_addr = (u8 *)(&msgbuf[1]);
+ s32 ret_val;
+
+ memset(msgbuf, 0, sizeof(msgbuf));
+ msgbuf[0] = IXGBE_VF_SET_MAC_ADDR;
+ memcpy(msg_addr, addr, 6);
+ ret_val = mbx->ops.write_posted(hw, msgbuf, 3);
+
+ if (!ret_val)
+ ret_val = mbx->ops.read_posted(hw, msgbuf, 3);
+
+ msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS;
+
+ /* if nacked the address was rejected, use "perm_addr" */
+ if (!ret_val &&
+ (msgbuf[0] == (IXGBE_VF_SET_MAC_ADDR | IXGBE_VT_MSGTYPE_NACK)))
+ ixgbevf_get_mac_addr_vf(hw, hw->mac.addr);
+
+ return ret_val;
+}
+
+/**
+ * ixgbevf_update_mc_addr_list_vf - Update Multicast addresses
+ * @hw: pointer to the HW structure
+ * @mc_addr_list: array of multicast addresses to program
+ * @mc_addr_count: number of multicast addresses to program
+ * @next: caller supplied function to return next address in list
+ *
+ * Updates the Multicast Table Array.
+ **/
+static s32 ixgbevf_update_mc_addr_list_vf(struct ixgbe_hw *hw, u8 *mc_addr_list,
+ u32 mc_addr_count,
+ ixgbe_mc_addr_itr next)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ u32 msgbuf[IXGBE_VFMAILBOX_SIZE];
+ u16 *vector_list = (u16 *)&msgbuf[1];
+ u32 vector;
+ u32 cnt, i;
+ u32 vmdq;
+
+ /* Each entry in the list uses 1 16 bit word. We have 30
+ * 16 bit words available in our HW msg buffer (minus 1 for the
+ * msg type). That's 30 hash values if we pack 'em right. If
+ * there are more than 30 MC addresses to add then punt the
+ * extras for now and then add code to handle more than 30 later.
+ * It would be unusual for a server to request that many multi-cast
+ * addresses except for in large enterprise network environments.
+ */
+
+ cnt = (mc_addr_count > 30) ? 30 : mc_addr_count;
+ msgbuf[0] = IXGBE_VF_SET_MULTICAST;
+ msgbuf[0] |= cnt << IXGBE_VT_MSGINFO_SHIFT;
+
+ for (i = 0; i < cnt; i++) {
+ vector = ixgbevf_mta_vector(hw, next(hw, &mc_addr_list, &vmdq));
+ vector_list[i] = vector;
+ }
+
+ mbx->ops.write_posted(hw, msgbuf, IXGBE_VFMAILBOX_SIZE);
+
+ return 0;
+}
+
+/**
+ * ixgbevf_set_vfta_vf - Set/Unset vlan filter table address
+ * @hw: pointer to the HW structure
+ * @vlan: 12 bit VLAN ID
+ * @vind: unused by VF drivers
+ * @vlan_on: if true then set bit, else clear bit
+ **/
+static s32 ixgbevf_set_vfta_vf(struct ixgbe_hw *hw, u32 vlan, u32 vind,
+ bool vlan_on)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ u32 msgbuf[2];
+
+ msgbuf[0] = IXGBE_VF_SET_VLAN;
+ msgbuf[1] = vlan;
+ /* Setting the 8 bit field MSG INFO to TRUE indicates "add" */
+ msgbuf[0] |= vlan_on << IXGBE_VT_MSGINFO_SHIFT;
+
+ return mbx->ops.write_posted(hw, msgbuf, 2);
+}
+
+/**
+ * ixgbevf_setup_mac_link_vf - Setup MAC link settings
+ * @hw: pointer to hardware structure
+ * @speed: Unused in this implementation
+ * @autoneg: Unused in this implementation
+ * @autoneg_wait_to_complete: Unused in this implementation
+ *
+ * Do nothing and return success. VF drivers are not allowed to change
+ * global settings. Maintained for driver compatibility.
+ **/
+static s32 ixgbevf_setup_mac_link_vf(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed, bool autoneg,
+ bool autoneg_wait_to_complete)
+{
+ return 0;
+}
+
+/**
+ * ixgbevf_check_mac_link_vf - Get link/speed status
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @link_up: true is link is up, false otherwise
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ * Reads the links register to determine if link is up and the current speed
+ **/
+static s32 ixgbevf_check_mac_link_vf(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *link_up,
+ bool autoneg_wait_to_complete)
+{
+ u32 links_reg;
+
+ if (!(hw->mbx.ops.check_for_rst(hw))) {
+ *link_up = false;
+ *speed = 0;
+ return -1;
+ }
+
+ links_reg = IXGBE_READ_REG(hw, IXGBE_VFLINKS);
+
+ if (links_reg & IXGBE_LINKS_UP)
+ *link_up = true;
+ else
+ *link_up = false;
+
+ if (links_reg & IXGBE_LINKS_SPEED)
+ *speed = IXGBE_LINK_SPEED_10GB_FULL;
+ else
+ *speed = IXGBE_LINK_SPEED_1GB_FULL;
+
+ return 0;
+}
+
+struct ixgbe_mac_operations ixgbevf_mac_ops = {
+ .init_hw = ixgbevf_init_hw_vf,
+ .reset_hw = ixgbevf_reset_hw_vf,
+ .start_hw = ixgbevf_start_hw_vf,
+ .get_mac_addr = ixgbevf_get_mac_addr_vf,
+ .stop_adapter = ixgbevf_stop_hw_vf,
+ .setup_link = ixgbevf_setup_mac_link_vf,
+ .check_link = ixgbevf_check_mac_link_vf,
+ .set_rar = ixgbevf_set_rar_vf,
+ .update_mc_addr_list = ixgbevf_update_mc_addr_list_vf,
+ .set_vfta = ixgbevf_set_vfta_vf,
+};
+
+struct ixgbevf_info ixgbevf_vf_info = {
+ .mac = ixgbe_mac_82599_vf,
+ .mac_ops = &ixgbevf_mac_ops,
+};
+
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-22 23:48:44 +0000