aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ixgbe
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ixgbe')
-rw-r--r--drivers/net/ixgbe/ixgbe_82598.c2
-rw-r--r--drivers/net/ixgbe/ixgbe_common.c232
-rw-r--r--drivers/net/ixgbe/ixgbe_ethtool.c4
-rw-r--r--drivers/net/ixgbe/ixgbe_main.c52
-rw-r--r--drivers/net/ixgbe/ixgbe_type.h9
5 files changed, 220 insertions, 79 deletions
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index 56b12f3192f..e2d5343f127 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -425,7 +425,7 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num)
#endif /* CONFIG_DCB */
default:
hw_dbg(hw, "Flow control param set incorrectly\n");
- ret_val = -IXGBE_ERR_CONFIG;
+ ret_val = IXGBE_ERR_CONFIG;
goto out;
break;
}
diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index 6621e172df3..40ff120a9ad 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -1355,9 +1355,7 @@ static void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq)
/**
* ixgbe_update_uc_addr_list_generic - Updates MAC list of secondary addresses
* @hw: pointer to hardware structure
- * @addr_list: the list of new addresses
- * @addr_count: number of addresses
- * @next: iterator function to walk the address list
+ * @uc_list: the list of new addresses
*
* The given list replaces any existing list. Clears the secondary addrs from
* receive address registers. Uses unused receive address registers for the
@@ -1663,7 +1661,7 @@ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw, s32 packetbuf_num)
#endif /* CONFIG_DCB */
default:
hw_dbg(hw, "Flow control param set incorrectly\n");
- ret_val = -IXGBE_ERR_CONFIG;
+ ret_val = IXGBE_ERR_CONFIG;
goto out;
break;
}
@@ -1734,75 +1732,140 @@ s32 ixgbe_fc_autoneg(struct ixgbe_hw *hw)
s32 ret_val = 0;
ixgbe_link_speed speed;
u32 pcs_anadv_reg, pcs_lpab_reg, linkstat;
+ u32 links2, anlp1_reg, autoc_reg, links;
bool link_up;
/*
* AN should have completed when the cable was plugged in.
* Look for reasons to bail out. Bail out if:
* - FC autoneg is disabled, or if
- * - we don't have multispeed fiber, or if
- * - we're not running at 1G, or if
- * - link is not up, or if
- * - link is up but AN did not complete, or if
- * - link is up and AN completed but timed out
+ * - link is not up.
*
- * Since we're being called from an LSC, link is already know to be up.
+ * Since we're being called from an LSC, link is already known to be up.
* So use link_up_wait_to_complete=false.
*/
hw->mac.ops.check_link(hw, &speed, &link_up, false);
- linkstat = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA);
-
- if (hw->fc.disable_fc_autoneg ||
- !hw->phy.multispeed_fiber ||
- (speed != IXGBE_LINK_SPEED_1GB_FULL) ||
- !link_up ||
- ((linkstat & IXGBE_PCS1GLSTA_AN_COMPLETE) == 0) ||
- ((linkstat & IXGBE_PCS1GLSTA_AN_TIMED_OUT) == 1)) {
+
+ if (hw->fc.disable_fc_autoneg || (!link_up)) {
hw->fc.fc_was_autonegged = false;
hw->fc.current_mode = hw->fc.requested_mode;
- hw_dbg(hw, "Autoneg FC was skipped.\n");
goto out;
}
/*
+ * On backplane, bail out if
+ * - backplane autoneg was not completed, or if
+ * - link partner is not AN enabled
+ */
+ if (hw->phy.media_type == ixgbe_media_type_backplane) {
+ links = IXGBE_READ_REG(hw, IXGBE_LINKS);
+ links2 = IXGBE_READ_REG(hw, IXGBE_LINKS2);
+ if (((links & IXGBE_LINKS_KX_AN_COMP) == 0) ||
+ ((links2 & IXGBE_LINKS2_AN_SUPPORTED) == 0)) {
+ hw->fc.fc_was_autonegged = false;
+ hw->fc.current_mode = hw->fc.requested_mode;
+ goto out;
+ }
+ }
+
+ /*
+ * On multispeed fiber at 1g, bail out if
+ * - link is up but AN did not complete, or if
+ * - link is up and AN completed but timed out
+ */
+ if (hw->phy.multispeed_fiber && (speed == IXGBE_LINK_SPEED_1GB_FULL)) {
+ linkstat = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA);
+ if (((linkstat & IXGBE_PCS1GLSTA_AN_COMPLETE) == 0) ||
+ ((linkstat & IXGBE_PCS1GLSTA_AN_TIMED_OUT) == 1)) {
+ hw->fc.fc_was_autonegged = false;
+ hw->fc.current_mode = hw->fc.requested_mode;
+ goto out;
+ }
+ }
+
+ /*
* Read the AN advertisement and LP ability registers and resolve
* local flow control settings accordingly
*/
- pcs_anadv_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
- pcs_lpab_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANLP);
- if ((pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
- (pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE)) {
+ if ((speed == IXGBE_LINK_SPEED_1GB_FULL) &&
+ (hw->phy.media_type != ixgbe_media_type_backplane)) {
+ pcs_anadv_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
+ pcs_lpab_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANLP);
+ if ((pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
+ (pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE)) {
+ /*
+ * Now we need to check if the user selected Rx ONLY
+ * of pause frames. In this case, we had to advertise
+ * FULL flow control because we could not advertise RX
+ * ONLY. Hence, we must now check to see if we need to
+ * turn OFF the TRANSMISSION of PAUSE frames.
+ */
+ if (hw->fc.requested_mode == ixgbe_fc_full) {
+ hw->fc.current_mode = ixgbe_fc_full;
+ hw_dbg(hw, "Flow Control = FULL.\n");
+ } else {
+ hw->fc.current_mode = ixgbe_fc_rx_pause;
+ hw_dbg(hw, "Flow Control=RX PAUSE only\n");
+ }
+ } else if (!(pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
+ (pcs_anadv_reg & IXGBE_PCS1GANA_ASM_PAUSE) &&
+ (pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
+ (pcs_lpab_reg & IXGBE_PCS1GANA_ASM_PAUSE)) {
+ hw->fc.current_mode = ixgbe_fc_tx_pause;
+ hw_dbg(hw, "Flow Control = TX PAUSE frames only.\n");
+ } else if ((pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
+ (pcs_anadv_reg & IXGBE_PCS1GANA_ASM_PAUSE) &&
+ !(pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
+ (pcs_lpab_reg & IXGBE_PCS1GANA_ASM_PAUSE)) {
+ hw->fc.current_mode = ixgbe_fc_rx_pause;
+ hw_dbg(hw, "Flow Control = RX PAUSE frames only.\n");
+ } else {
+ hw->fc.current_mode = ixgbe_fc_none;
+ hw_dbg(hw, "Flow Control = NONE.\n");
+ }
+ }
+
+ if (hw->phy.media_type == ixgbe_media_type_backplane) {
/*
- * Now we need to check if the user selected Rx ONLY
- * of pause frames. In this case, we had to advertise
- * FULL flow control because we could not advertise RX
- * ONLY. Hence, we must now check to see if we need to
- * turn OFF the TRANSMISSION of PAUSE frames.
+ * Read the 10g AN autoc and LP ability registers and resolve
+ * local flow control settings accordingly
*/
- if (hw->fc.requested_mode == ixgbe_fc_full) {
- hw->fc.current_mode = ixgbe_fc_full;
- hw_dbg(hw, "Flow Control = FULL.\n");
- } else {
+ autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ anlp1_reg = IXGBE_READ_REG(hw, IXGBE_ANLP1);
+
+ if ((autoc_reg & IXGBE_AUTOC_SYM_PAUSE) &&
+ (anlp1_reg & IXGBE_ANLP1_SYM_PAUSE)) {
+ /*
+ * Now we need to check if the user selected Rx ONLY
+ * of pause frames. In this case, we had to advertise
+ * FULL flow control because we could not advertise RX
+ * ONLY. Hence, we must now check to see if we need to
+ * turn OFF the TRANSMISSION of PAUSE frames.
+ */
+ if (hw->fc.requested_mode == ixgbe_fc_full) {
+ hw->fc.current_mode = ixgbe_fc_full;
+ hw_dbg(hw, "Flow Control = FULL.\n");
+ } else {
+ hw->fc.current_mode = ixgbe_fc_rx_pause;
+ hw_dbg(hw, "Flow Control=RX PAUSE only\n");
+ }
+ } else if (!(autoc_reg & IXGBE_AUTOC_SYM_PAUSE) &&
+ (autoc_reg & IXGBE_AUTOC_ASM_PAUSE) &&
+ (anlp1_reg & IXGBE_ANLP1_SYM_PAUSE) &&
+ (anlp1_reg & IXGBE_ANLP1_ASM_PAUSE)) {
+ hw->fc.current_mode = ixgbe_fc_tx_pause;
+ hw_dbg(hw, "Flow Control = TX PAUSE frames only.\n");
+ } else if ((autoc_reg & IXGBE_AUTOC_SYM_PAUSE) &&
+ (autoc_reg & IXGBE_AUTOC_ASM_PAUSE) &&
+ !(anlp1_reg & IXGBE_ANLP1_SYM_PAUSE) &&
+ (anlp1_reg & IXGBE_ANLP1_ASM_PAUSE)) {
hw->fc.current_mode = ixgbe_fc_rx_pause;
hw_dbg(hw, "Flow Control = RX PAUSE frames only.\n");
+ } else {
+ hw->fc.current_mode = ixgbe_fc_none;
+ hw_dbg(hw, "Flow Control = NONE.\n");
}
- } else if (!(pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
- (pcs_anadv_reg & IXGBE_PCS1GANA_ASM_PAUSE) &&
- (pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
- (pcs_lpab_reg & IXGBE_PCS1GANA_ASM_PAUSE)) {
- hw->fc.current_mode = ixgbe_fc_tx_pause;
- hw_dbg(hw, "Flow Control = TX PAUSE frames only.\n");
- } else if ((pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
- (pcs_anadv_reg & IXGBE_PCS1GANA_ASM_PAUSE) &&
- !(pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
- (pcs_lpab_reg & IXGBE_PCS1GANA_ASM_PAUSE)) {
- hw->fc.current_mode = ixgbe_fc_rx_pause;
- hw_dbg(hw, "Flow Control = RX PAUSE frames only.\n");
- } else {
- hw->fc.current_mode = ixgbe_fc_none;
- hw_dbg(hw, "Flow Control = NONE.\n");
}
-
/* Record that current_mode is the result of a successful autoneg */
hw->fc.fc_was_autonegged = true;
@@ -1919,7 +1982,7 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num)
#endif /* CONFIG_DCB */
default:
hw_dbg(hw, "Flow control param set incorrectly\n");
- ret_val = -IXGBE_ERR_CONFIG;
+ ret_val = IXGBE_ERR_CONFIG;
goto out;
break;
}
@@ -1927,9 +1990,6 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num)
IXGBE_WRITE_REG(hw, IXGBE_PCS1GANA, reg);
reg = IXGBE_READ_REG(hw, IXGBE_PCS1GLCTL);
- /* Enable and restart autoneg to inform the link partner */
- reg |= IXGBE_PCS1GLCTL_AN_ENABLE | IXGBE_PCS1GLCTL_AN_RESTART;
-
/* Disable AN timeout */
if (hw->fc.strict_ieee)
reg &= ~IXGBE_PCS1GLCTL_AN_1G_TIMEOUT_EN;
@@ -1937,6 +1997,70 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num)
IXGBE_WRITE_REG(hw, IXGBE_PCS1GLCTL, reg);
hw_dbg(hw, "Set up FC; PCS1GLCTL = 0x%08X\n", reg);
+ /*
+ * Set up the 10G flow control advertisement registers so the HW
+ * can do fc autoneg once the cable is plugged in. If we end up
+ * using 1g instead, this is harmless.
+ */
+ reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+
+ /*
+ * The possible values of fc.requested_mode are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause frames,
+ * but not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames but
+ * we do not support receiving pause frames).
+ * 3: Both Rx and Tx flow control (symmetric) are enabled.
+ * other: Invalid.
+ */
+ switch (hw->fc.requested_mode) {
+ case ixgbe_fc_none:
+ /* Flow control completely disabled by software override. */
+ reg &= ~(IXGBE_AUTOC_SYM_PAUSE | IXGBE_AUTOC_ASM_PAUSE);
+ break;
+ case ixgbe_fc_rx_pause:
+ /*
+ * Rx Flow control is enabled and Tx Flow control is
+ * disabled by software override. Since there really
+ * isn't a way to advertise that we are capable of RX
+ * Pause ONLY, we will advertise that we support both
+ * symmetric and asymmetric Rx PAUSE. Later, we will
+ * disable the adapter's ability to send PAUSE frames.
+ */
+ reg |= (IXGBE_AUTOC_SYM_PAUSE | IXGBE_AUTOC_ASM_PAUSE);
+ break;
+ case ixgbe_fc_tx_pause:
+ /*
+ * Tx Flow control is enabled, and Rx Flow control is
+ * disabled by software override.
+ */
+ reg |= (IXGBE_AUTOC_ASM_PAUSE);
+ reg &= ~(IXGBE_AUTOC_SYM_PAUSE);
+ break;
+ case ixgbe_fc_full:
+ /* Flow control (both Rx and Tx) is enabled by SW override. */
+ reg |= (IXGBE_AUTOC_SYM_PAUSE | IXGBE_AUTOC_ASM_PAUSE);
+ break;
+#ifdef CONFIG_DCB
+ case ixgbe_fc_pfc:
+ goto out;
+ break;
+#endif /* CONFIG_DCB */
+ default:
+ hw_dbg(hw, "Flow control param set incorrectly\n");
+ ret_val = IXGBE_ERR_CONFIG;
+ goto out;
+ break;
+ }
+ /*
+ * AUTOC restart handles negotiation of 1G and 10G. There is
+ * no need to set the PCS1GCTL register.
+ */
+ reg |= IXGBE_AUTOC_AN_RESTART;
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, reg);
+ hw_dbg(hw, "Set up FC; IXGBE_AUTOC = 0x%08X\n", reg);
+
out:
return ret_val;
}
@@ -2000,7 +2124,7 @@ s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask)
while (timeout) {
if (ixgbe_get_eeprom_semaphore(hw))
- return -IXGBE_ERR_SWFW_SYNC;
+ return IXGBE_ERR_SWFW_SYNC;
gssr = IXGBE_READ_REG(hw, IXGBE_GSSR);
if (!(gssr & (fwmask | swmask)))
@@ -2017,7 +2141,7 @@ s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask)
if (!timeout) {
hw_dbg(hw, "Driver can't access resource, GSSR timeout.\n");
- return -IXGBE_ERR_SWFW_SYNC;
+ return IXGBE_ERR_SWFW_SYNC;
}
gssr |= swmask;
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 53b0a668025..fa314cb005a 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -53,6 +53,10 @@ static struct ixgbe_stats ixgbe_gstrings_stats[] = {
{"tx_packets", IXGBE_STAT(net_stats.tx_packets)},
{"rx_bytes", IXGBE_STAT(net_stats.rx_bytes)},
{"tx_bytes", IXGBE_STAT(net_stats.tx_bytes)},
+ {"rx_pkts_nic", IXGBE_STAT(stats.gprc)},
+ {"tx_pkts_nic", IXGBE_STAT(stats.gptc)},
+ {"rx_bytes_nic", IXGBE_STAT(stats.gorc)},
+ {"tx_bytes_nic", IXGBE_STAT(stats.gotc)},
{"lsc_int", IXGBE_STAT(lsc_int)},
{"tx_busy", IXGBE_STAT(tx_busy)},
{"non_eop_descs", IXGBE_STAT(non_eop_descs)},
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index c407bd9de0d..28fbb9d281f 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -49,7 +49,7 @@ char ixgbe_driver_name[] = "ixgbe";
static const char ixgbe_driver_string[] =
"Intel(R) 10 Gigabit PCI Express Network Driver";
-#define DRV_VERSION "2.0.37-k2"
+#define DRV_VERSION "2.0.44-k2"
const char ixgbe_driver_version[] = DRV_VERSION;
static char ixgbe_copyright[] = "Copyright (c) 1999-2009 Intel Corporation.";
@@ -1885,12 +1885,29 @@ static void ixgbe_configure_tx(struct ixgbe_adapter *adapter)
IXGBE_WRITE_REG(hw, IXGBE_TDT(j), 0);
adapter->tx_ring[i].head = IXGBE_TDH(j);
adapter->tx_ring[i].tail = IXGBE_TDT(j);
- /* Disable Tx Head Writeback RO bit, since this hoses
+ /*
+ * Disable Tx Head Writeback RO bit, since this hoses
* bookkeeping if things aren't delivered in order.
*/
- txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(j));
+ switch (hw->mac.type) {
+ case ixgbe_mac_82598EB:
+ txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(j));
+ break;
+ case ixgbe_mac_82599EB:
+ default:
+ txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(j));
+ break;
+ }
txctrl &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN;
- IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(j), txctrl);
+ switch (hw->mac.type) {
+ case ixgbe_mac_82598EB:
+ IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(j), txctrl);
+ break;
+ case ixgbe_mac_82599EB:
+ default:
+ IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(j), txctrl);
+ break;
+ }
}
if (hw->mac.type == ixgbe_mac_82599EB) {
/* We enable 8 traffic classes, DCB only */
@@ -4432,10 +4449,13 @@ void ixgbe_update_stats(struct ixgbe_adapter *adapter)
/* 82598 hardware only has a 32 bit counter in the high register */
if (hw->mac.type == ixgbe_mac_82599EB) {
+ u64 tmp;
adapter->stats.gorc += IXGBE_READ_REG(hw, IXGBE_GORCL);
- IXGBE_READ_REG(hw, IXGBE_GORCH); /* to clear */
+ tmp = IXGBE_READ_REG(hw, IXGBE_GORCH) & 0xF; /* 4 high bits of GORC */
+ adapter->stats.gorc += (tmp << 32);
adapter->stats.gotc += IXGBE_READ_REG(hw, IXGBE_GOTCL);
- IXGBE_READ_REG(hw, IXGBE_GOTCH); /* to clear */
+ tmp = IXGBE_READ_REG(hw, IXGBE_GOTCH) & 0xF; /* 4 high bits of GOTC */
+ adapter->stats.gotc += (tmp << 32);
adapter->stats.tor += IXGBE_READ_REG(hw, IXGBE_TORL);
IXGBE_READ_REG(hw, IXGBE_TORH); /* to clear */
adapter->stats.lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXCNT);
@@ -5071,7 +5091,6 @@ static void ixgbe_atr(struct ixgbe_adapter *adapter, struct sk_buff *skb,
/* Right now, we support IPv4 only */
struct ixgbe_atr_input atr_input;
struct tcphdr *th;
- struct udphdr *uh;
struct iphdr *iph = ip_hdr(skb);
struct ethhdr *eth = (struct ethhdr *)skb->data;
u16 vlan_id, src_port, dst_port, flex_bytes;
@@ -5085,12 +5104,6 @@ static void ixgbe_atr(struct ixgbe_adapter *adapter, struct sk_buff *skb,
dst_port = th->dest;
l4type |= IXGBE_ATR_L4TYPE_TCP;
/* l4type IPv4 type is 0, no need to assign */
- } else if(iph->protocol == IPPROTO_UDP) {
- uh = udp_hdr(skb);
- src_port = uh->source;
- dst_port = uh->dest;
- l4type |= IXGBE_ATR_L4TYPE_UDP;
- /* l4type IPv4 type is 0, no need to assign */
} else {
/* Unsupported L4 header, just bail here */
return;
@@ -5494,12 +5507,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
goto err_pci_reg;
}
- err = pci_enable_pcie_error_reporting(pdev);
- if (err) {
- dev_err(&pdev->dev, "pci_enable_pcie_error_reporting failed "
- "0x%x\n", err);
- /* non-fatal, continue */
- }
+ pci_enable_pcie_error_reporting(pdev);
pci_set_master(pdev);
pci_save_state(pdev);
@@ -5808,7 +5816,6 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct ixgbe_adapter *adapter = netdev_priv(netdev);
- int err;
set_bit(__IXGBE_DOWN, &adapter->state);
/* clear the module not found bit to make sure the worker won't
@@ -5859,10 +5866,7 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev)
free_netdev(netdev);
- err = pci_disable_pcie_error_reporting(pdev);
- if (err)
- dev_err(&pdev->dev,
- "pci_disable_pcie_error_reporting failed 0x%x\n", err);
+ pci_disable_pcie_error_reporting(pdev);
pci_disable_device(pdev);
}
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index 8761d7899f7..7c93e923bf2 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -1336,6 +1336,8 @@
#define IXGBE_AUTOC_KX4_SUPP 0x80000000
#define IXGBE_AUTOC_KX_SUPP 0x40000000
#define IXGBE_AUTOC_PAUSE 0x30000000
+#define IXGBE_AUTOC_ASM_PAUSE 0x20000000
+#define IXGBE_AUTOC_SYM_PAUSE 0x10000000
#define IXGBE_AUTOC_RF 0x08000000
#define IXGBE_AUTOC_PD_TMR 0x06000000
#define IXGBE_AUTOC_AN_RX_LOOSE 0x01000000
@@ -1404,6 +1406,8 @@
#define IXGBE_LINK_UP_TIME 90 /* 9.0 Seconds */
#define IXGBE_AUTO_NEG_TIME 45 /* 4.5 Seconds */
+#define IXGBE_LINKS2_AN_SUPPORTED 0x00000040
+
/* PCS1GLSTA Bit Masks */
#define IXGBE_PCS1GLSTA_LINK_OK 1
#define IXGBE_PCS1GLSTA_SYNK_OK 0x10
@@ -1424,6 +1428,11 @@
#define IXGBE_PCS1GLCTL_AN_ENABLE 0x10000
#define IXGBE_PCS1GLCTL_AN_RESTART 0x20000
+/* ANLP1 Bit Masks */
+#define IXGBE_ANLP1_PAUSE 0x0C00
+#define IXGBE_ANLP1_SYM_PAUSE 0x0400
+#define IXGBE_ANLP1_ASM_PAUSE 0x0800
+
/* SW Semaphore Register bitmasks */
#define IXGBE_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */
#define IXGBE_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-21 10:00:36 +0000