aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ixgbe/ixgbe_82598.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ixgbe/ixgbe_82598.c')
-rw-r--r--drivers/net/ixgbe/ixgbe_82598.c526
1 files changed, 0 insertions, 526 deletions
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
deleted file mode 100644
index 2f38e847e2c..00000000000
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ /dev/null
@@ -1,526 +0,0 @@
-/*******************************************************************************
-
- Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2007 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-
-#include "ixgbe.h"
-#include "ixgbe_phy.h"
-
-#define IXGBE_82598_MAX_TX_QUEUES 32
-#define IXGBE_82598_MAX_RX_QUEUES 64
-#define IXGBE_82598_RAR_ENTRIES 16
-
-static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw);
-static s32 ixgbe_get_link_settings_82598(struct ixgbe_hw *hw, u32 *speed,
- bool *autoneg);
-static s32 ixgbe_get_copper_link_settings_82598(struct ixgbe_hw *hw,
- u32 *speed, bool *autoneg);
-static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw);
-static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw);
-static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw, u32 *speed,
- bool *link_up);
-static s32 ixgbe_setup_mac_link_speed_82598(struct ixgbe_hw *hw, u32 speed,
- bool autoneg,
- bool autoneg_wait_to_complete);
-static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw);
-static s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw, u32 speed,
- bool autoneg,
- bool autoneg_wait_to_complete);
-static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw);
-
-
-static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw)
-{
- hw->mac.num_rx_queues = IXGBE_82598_MAX_RX_QUEUES;
- hw->mac.num_tx_queues = IXGBE_82598_MAX_TX_QUEUES;
- hw->mac.num_rx_addrs = IXGBE_82598_RAR_ENTRIES;
-
- /* PHY ops are filled in by default properly for Fiber only */
- if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_copper) {
- hw->mac.ops.setup_link = &ixgbe_setup_copper_link_82598;
- hw->mac.ops.setup_link_speed = &ixgbe_setup_copper_link_speed_82598;
- hw->mac.ops.get_link_settings =
- &ixgbe_get_copper_link_settings_82598;
-
- /* Call PHY identify routine to get the phy type */
- ixgbe_identify_phy(hw);
-
- switch (hw->phy.type) {
- case ixgbe_phy_tn:
- hw->phy.ops.setup_link = &ixgbe_setup_tnx_phy_link;
- hw->phy.ops.check_link = &ixgbe_check_tnx_phy_link;
- hw->phy.ops.setup_link_speed =
- &ixgbe_setup_tnx_phy_link_speed;
- break;
- default:
- break;
- }
- }
-
- return 0;
-}
-
-/**
- * ixgbe_get_link_settings_82598 - Determines default link settings
- * @hw: pointer to hardware structure
- * @speed: pointer to link speed
- * @autoneg: boolean auto-negotiation value
- *
- * Determines the default link settings by reading the AUTOC register.
- **/
-static s32 ixgbe_get_link_settings_82598(struct ixgbe_hw *hw, u32 *speed,
- bool *autoneg)
-{
- s32 status = 0;
- s32 autoc_reg;
-
- autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
-
- if (hw->mac.link_settings_loaded) {
- autoc_reg &= ~IXGBE_AUTOC_LMS_ATTACH_TYPE;
- autoc_reg &= ~IXGBE_AUTOC_LMS_MASK;
- autoc_reg |= hw->mac.link_attach_type;
- autoc_reg |= hw->mac.link_mode_select;
- }
-
- switch (autoc_reg & IXGBE_AUTOC_LMS_MASK) {
- case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
- *speed = IXGBE_LINK_SPEED_1GB_FULL;
- *autoneg = false;
- break;
-
- case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
- *speed = IXGBE_LINK_SPEED_10GB_FULL;
- *autoneg = false;
- break;
-
- case IXGBE_AUTOC_LMS_1G_AN:
- *speed = IXGBE_LINK_SPEED_1GB_FULL;
- *autoneg = true;
- break;
-
- case IXGBE_AUTOC_LMS_KX4_AN:
- case IXGBE_AUTOC_LMS_KX4_AN_1G_AN:
- *speed = IXGBE_LINK_SPEED_UNKNOWN;
- if (autoc_reg & IXGBE_AUTOC_KX4_SUPP)
- *speed |= IXGBE_LINK_SPEED_10GB_FULL;
- if (autoc_reg & IXGBE_AUTOC_KX_SUPP)
- *speed |= IXGBE_LINK_SPEED_1GB_FULL;
- *autoneg = true;
- break;
-
- default:
- status = IXGBE_ERR_LINK_SETUP;
- break;
- }
-
- return status;
-}
-
-/**
- * ixgbe_get_copper_link_settings_82598 - Determines default link settings
- * @hw: pointer to hardware structure
- * @speed: pointer to link speed
- * @autoneg: boolean auto-negotiation value
- *
- * Determines the default link settings by reading the AUTOC register.
- **/
-static s32 ixgbe_get_copper_link_settings_82598(struct ixgbe_hw *hw,
- u32 *speed, bool *autoneg)
-{
- s32 status = IXGBE_ERR_LINK_SETUP;
- u16 speed_ability;
-
- *speed = 0;
- *autoneg = true;
-
- status = ixgbe_read_phy_reg(hw, IXGBE_MDIO_PHY_SPEED_ABILITY,
- IXGBE_MDIO_PMA_PMD_DEV_TYPE,
- &speed_ability);
-
- if (status == 0) {
- if (speed_ability & IXGBE_MDIO_PHY_SPEED_10G)
- *speed |= IXGBE_LINK_SPEED_10GB_FULL;
- if (speed_ability & IXGBE_MDIO_PHY_SPEED_1G)
- *speed |= IXGBE_LINK_SPEED_1GB_FULL;
- }
-
- return status;
-}
-
-/**
- * ixgbe_get_media_type_82598 - Determines media type
- * @hw: pointer to hardware structure
- *
- * Returns the media type (fiber, copper, backplane)
- **/
-static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw)
-{
- enum ixgbe_media_type media_type;
-
- /* Media type for I82598 is based on device ID */
- switch (hw->device_id) {
- case IXGBE_DEV_ID_82598AF_DUAL_PORT:
- case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
- case IXGBE_DEV_ID_82598EB_CX4:
- media_type = ixgbe_media_type_fiber;
- break;
- case IXGBE_DEV_ID_82598AT_DUAL_PORT:
- media_type = ixgbe_media_type_copper;
- break;
- default:
- media_type = ixgbe_media_type_unknown;
- break;
- }
-
- return media_type;
-}
-
-/**
- * ixgbe_setup_mac_link_82598 - Configures MAC link settings
- * @hw: pointer to hardware structure
- *
- * Configures link settings based on values in the ixgbe_hw struct.
- * Restarts the link. Performs autonegotiation if needed.
- **/
-static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw)
-{
- u32 autoc_reg;
- u32 links_reg;
- u32 i;
- s32 status = 0;
-
- autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
-
- if (hw->mac.link_settings_loaded) {
- autoc_reg &= ~IXGBE_AUTOC_LMS_ATTACH_TYPE;
- autoc_reg &= ~IXGBE_AUTOC_LMS_MASK;
- autoc_reg |= hw->mac.link_attach_type;
- autoc_reg |= hw->mac.link_mode_select;
-
- IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
- IXGBE_WRITE_FLUSH(hw);
- msleep(50);
- }
-
- /* Restart link */
- autoc_reg |= IXGBE_AUTOC_AN_RESTART;
- IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
-
- /* Only poll for autoneg to complete if specified to do so */
- if (hw->phy.autoneg_wait_to_complete) {
- if (hw->mac.link_mode_select == IXGBE_AUTOC_LMS_KX4_AN ||
- hw->mac.link_mode_select == IXGBE_AUTOC_LMS_KX4_AN_1G_AN) {
- links_reg = 0; /* Just in case Autoneg time = 0 */
- for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) {
- links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
- if (links_reg & IXGBE_LINKS_KX_AN_COMP)
- break;
- msleep(100);
- }
- if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) {
- status = IXGBE_ERR_AUTONEG_NOT_COMPLETE;
- hw_dbg(hw,
- "Autonegotiation did not complete.\n");
- }
- }
- }
-
- /*
- * We want to save off the original Flow Control configuration just in
- * case we get disconnected and then reconnected into a different hub
- * or switch with different Flow Control capabilities.
- */
- hw->fc.type = hw->fc.original_type;
- ixgbe_setup_fc(hw, 0);
-
- /* Add delay to filter out noises during initial link setup */
- msleep(50);
-
- return status;
-}
-
-/**
- * ixgbe_check_mac_link_82598 - Get link/speed status
- * @hw: pointer to hardware structure
- * @speed: pointer to link speed
- * @link_up: true is link is up, false otherwise
- *
- * Reads the links register to determine if link is up and the current speed
- **/
-static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw, u32 *speed,
- bool *link_up)
-{
- u32 links_reg;
-
- links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
-
- if (links_reg & IXGBE_LINKS_UP)
- *link_up = true;
- else
- *link_up = false;
-
- if (links_reg & IXGBE_LINKS_SPEED)
- *speed = IXGBE_LINK_SPEED_10GB_FULL;
- else
- *speed = IXGBE_LINK_SPEED_1GB_FULL;
-
- return 0;
-}
-
-/**
- * ixgbe_setup_mac_link_speed_82598 - Set MAC link speed
- * @hw: pointer to hardware structure
- * @speed: new link speed
- * @autoneg: true if auto-negotiation enabled
- * @autoneg_wait_to_complete: true if waiting is needed to complete
- *
- * Set the link speed in the AUTOC register and restarts link.
- **/
-static s32 ixgbe_setup_mac_link_speed_82598(struct ixgbe_hw *hw,
- u32 speed, bool autoneg,
- bool autoneg_wait_to_complete)
-{
- s32 status = 0;
-
- /* If speed is 10G, then check for CX4 or XAUI. */
- if ((speed == IXGBE_LINK_SPEED_10GB_FULL) &&
- (!(hw->mac.link_attach_type & IXGBE_AUTOC_10G_KX4)))
- hw->mac.link_mode_select = IXGBE_AUTOC_LMS_10G_LINK_NO_AN;
- else if ((speed == IXGBE_LINK_SPEED_1GB_FULL) && (!autoneg))
- hw->mac.link_mode_select = IXGBE_AUTOC_LMS_1G_LINK_NO_AN;
- else if (autoneg) {
- /* BX mode - Autonegotiate 1G */
- if (!(hw->mac.link_attach_type & IXGBE_AUTOC_1G_PMA_PMD))
- hw->mac.link_mode_select = IXGBE_AUTOC_LMS_1G_AN;
- else /* KX/KX4 mode */
- hw->mac.link_mode_select = IXGBE_AUTOC_LMS_KX4_AN_1G_AN;
- } else {
- status = IXGBE_ERR_LINK_SETUP;
- }
-
- if (status == 0) {
- hw->phy.autoneg_wait_to_complete = autoneg_wait_to_complete;
-
- hw->mac.link_settings_loaded = true;
- /*
- * Setup and restart the link based on the new values in
- * ixgbe_hw This will write the AUTOC register based on the new
- * stored values
- */
- hw->mac.ops.setup_link(hw);
- }
-
- return status;
-}
-
-
-/**
- * ixgbe_setup_copper_link_82598 - Setup copper link settings
- * @hw: pointer to hardware structure
- *
- * Configures link settings based on values in the ixgbe_hw struct.
- * Restarts the link. Performs autonegotiation if needed. Restart
- * phy and wait for autonegotiate to finish. Then synchronize the
- * MAC and PHY.
- **/
-static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw)
-{
- s32 status = 0;
-
- /* Restart autonegotiation on PHY */
- if (hw->phy.ops.setup_link)
- status = hw->phy.ops.setup_link(hw);
-
- /* Set MAC to KX/KX4 autoneg, which defaultis to Parallel detection */
- hw->mac.link_attach_type = (IXGBE_AUTOC_10G_KX4 | IXGBE_AUTOC_1G_KX);
- hw->mac.link_mode_select = IXGBE_AUTOC_LMS_KX4_AN;
-
- /* Set up MAC */
- hw->mac.ops.setup_link(hw);
-
- return status;
-}
-
-/**
- * ixgbe_setup_copper_link_speed_82598 - Set the PHY autoneg advertised field
- * @hw: pointer to hardware structure
- * @speed: new link speed
- * @autoneg: true if autonegotiation enabled
- * @autoneg_wait_to_complete: true if waiting is needed to complete
- *
- * Sets the link speed in the AUTOC register in the MAC and restarts link.
- **/
-static s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw, u32 speed,
- bool autoneg,
- bool autoneg_wait_to_complete)
-{
- s32 status = 0;
-
- /* Setup the PHY according to input speed */
- if (hw->phy.ops.setup_link_speed)
- status = hw->phy.ops.setup_link_speed(hw, speed, autoneg,
- autoneg_wait_to_complete);
-
- /* Set MAC to KX/KX4 autoneg, which defaults to Parallel detection */
- hw->mac.link_attach_type = (IXGBE_AUTOC_10G_KX4 | IXGBE_AUTOC_1G_KX);
- hw->mac.link_mode_select = IXGBE_AUTOC_LMS_KX4_AN;
-
- /* Set up MAC */
- hw->mac.ops.setup_link(hw);
-
- return status;
-}
-
-/**
- * ixgbe_reset_hw_82598 - Performs hardware reset
- * @hw: pointer to hardware structure
- *
- * Resets the hardware by reseting the transmit and receive units, masks and
- * clears all interrupts, performing a PHY reset, and performing a link (MAC)
- * reset.
- **/
-static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw)
-{
- s32 status = 0;
- u32 ctrl;
- u32 gheccr;
- u32 i;
- u32 autoc;
- u8 analog_val;
-
- /* Call adapter stop to disable tx/rx and clear interrupts */
- ixgbe_stop_adapter(hw);
-
- /*
- * Power up the Atlas TX lanes if they are currently powered down.
- * Atlas TX lanes are powered down for MAC loopback tests, but
- * they are not automatically restored on reset.
- */
- ixgbe_read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &analog_val);
- if (analog_val & IXGBE_ATLAS_PDN_TX_REG_EN) {
- /* Enable TX Atlas so packets can be transmitted again */
- ixgbe_read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &analog_val);
- analog_val &= ~IXGBE_ATLAS_PDN_TX_REG_EN;
- ixgbe_write_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, analog_val);
-
- ixgbe_read_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, &analog_val);
- analog_val &= ~IXGBE_ATLAS_PDN_TX_10G_QL_ALL;
- ixgbe_write_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, analog_val);
-
- ixgbe_read_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, &analog_val);
- analog_val &= ~IXGBE_ATLAS_PDN_TX_1G_QL_ALL;
- ixgbe_write_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, analog_val);
-
- ixgbe_read_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, &analog_val);
- analog_val &= ~IXGBE_ATLAS_PDN_TX_AN_QL_ALL;
- ixgbe_write_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, analog_val);
- }
-
- /* Reset PHY */
- ixgbe_reset_phy(hw);
-
- /*
- * Prevent the PCI-E bus from from hanging by disabling PCI-E master
- * access and verify no pending requests before reset
- */
- if (ixgbe_disable_pcie_master(hw) != 0) {
- status = IXGBE_ERR_MASTER_REQUESTS_PENDING;
- hw_dbg(hw, "PCI-E Master disable polling has failed.\n");
- }
-
- /*
- * Issue global reset to the MAC. This needs to be a SW reset.
- * If link reset is used, it might reset the MAC when mng is using it
- */
- ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
- IXGBE_WRITE_REG(hw, IXGBE_CTRL, (ctrl | IXGBE_CTRL_RST));
- IXGBE_WRITE_FLUSH(hw);
-
- /* Poll for reset bit to self-clear indicating reset is complete */
- for (i = 0; i < 10; i++) {
- udelay(1);
- ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
- if (!(ctrl & IXGBE_CTRL_RST))
- break;
- }
- if (ctrl & IXGBE_CTRL_RST) {
- status = IXGBE_ERR_RESET_FAILED;
- hw_dbg(hw, "Reset polling failed to complete.\n");
- }
-
- msleep(50);
-
- gheccr = IXGBE_READ_REG(hw, IXGBE_GHECCR);
- gheccr &= ~((1 << 21) | (1 << 18) | (1 << 9) | (1 << 6));
- IXGBE_WRITE_REG(hw, IXGBE_GHECCR, gheccr);
-
- /*
- * AUTOC register which stores link settings gets cleared
- * and reloaded from EEPROM after reset. We need to restore
- * our stored value from init in case SW changed the attach
- * type or speed. If this is the first time and link settings
- * have not been stored, store default settings from AUTOC.
- */
- autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
- if (hw->mac.link_settings_loaded) {
- autoc &= ~(IXGBE_AUTOC_LMS_ATTACH_TYPE);
- autoc &= ~(IXGBE_AUTOC_LMS_MASK);
- autoc |= hw->mac.link_attach_type;
- autoc |= hw->mac.link_mode_select;
- IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc);
- } else {
- hw->mac.link_attach_type =
- (autoc & IXGBE_AUTOC_LMS_ATTACH_TYPE);
- hw->mac.link_mode_select = (autoc & IXGBE_AUTOC_LMS_MASK);
- hw->mac.link_settings_loaded = true;
- }
-
- /* Store the permanent mac address */
- ixgbe_get_mac_addr(hw, hw->mac.perm_addr);
-
- return status;
-}
-
-static struct ixgbe_mac_operations mac_ops_82598 = {
- .reset = &ixgbe_reset_hw_82598,
- .get_media_type = &ixgbe_get_media_type_82598,
- .setup_link = &ixgbe_setup_mac_link_82598,
- .check_link = &ixgbe_check_mac_link_82598,
- .setup_link_speed = &ixgbe_setup_mac_link_speed_82598,
- .get_link_settings = &ixgbe_get_link_settings_82598,
-};
-
-struct ixgbe_info ixgbe_82598_info = {
- .mac = ixgbe_mac_82598EB,
- .get_invariants = &ixgbe_get_invariants_82598,
- .mac_ops = &mac_ops_82598,
-};
-
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-09 14:20:08 +0000