diff options
Diffstat (limited to 'drivers/net/irda')
-rw-r--r-- | drivers/net/irda/ali-ircc.c | 4 | ||||
-rw-r--r-- | drivers/net/irda/donauboe.c | 2 | ||||
-rw-r--r-- | drivers/net/irda/donauboe.h | 2 | ||||
-rw-r--r-- | drivers/net/irda/girbil-sir.c | 2 | ||||
-rw-r--r-- | drivers/net/irda/irda-usb.c | 4 | ||||
-rw-r--r-- | drivers/net/irda/mcs7780.c | 6 | ||||
-rw-r--r-- | drivers/net/irda/nsc-ircc.c | 2 | ||||
-rw-r--r-- | drivers/net/irda/nsc-ircc.h | 2 | ||||
-rw-r--r-- | drivers/net/irda/pxaficp_ir.c | 4 | ||||
-rw-r--r-- | drivers/net/irda/smsc-ircc2.c | 2 | ||||
-rw-r--r-- | drivers/net/irda/via-ircc.c | 4 | ||||
-rw-r--r-- | drivers/net/irda/vlsi_ir.h | 4 |
12 files changed, 19 insertions, 19 deletions
diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c index 92631eb6f6a..872183f29ec 100644 --- a/drivers/net/irda/ali-ircc.c +++ b/drivers/net/irda/ali-ircc.c @@ -76,7 +76,7 @@ static int ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info); static int ali_ircc_init_43(ali_chip_t *chip, chipio_t *info); static int ali_ircc_init_53(ali_chip_t *chip, chipio_t *info); -/* These are the currently known ALi sourth-bridge chipsets, the only one difference +/* These are the currently known ALi south-bridge chipsets, the only one difference * is that M1543C doesn't support HP HDSL-3600 */ static ali_chip_t chips[] = @@ -1108,7 +1108,7 @@ static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed) outb(lcr, iobase+UART_LCR); /* Set 8N1 */ outb(fcr, iobase+UART_FCR); /* Enable FIFO's */ - /* without this, the conection will be broken after come back from FIR speed, + /* without this, the connection will be broken after come back from FIR speed, but with this, the SIR connection is harder to established */ outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase+UART_MCR); diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c index f81d944fc36..174cafad2c1 100644 --- a/drivers/net/irda/donauboe.c +++ b/drivers/net/irda/donauboe.c @@ -56,7 +56,7 @@ /* do_probe module parameter Enable this code */ /* Probe code is very useful for understanding how the hardware works */ /* Use it with various combinations of TT_LEN, RX_LEN */ -/* Strongly recomended, disable if the probe fails on your machine */ +/* Strongly recommended, disable if the probe fails on your machine */ /* and send me <james@fishsoup.dhs.org> the output of dmesg */ #define USE_PROBE 1 #undef USE_PROBE diff --git a/drivers/net/irda/donauboe.h b/drivers/net/irda/donauboe.h index 77fcf445916..d92d54e839b 100644 --- a/drivers/net/irda/donauboe.h +++ b/drivers/net/irda/donauboe.h @@ -51,7 +51,7 @@ /* The documentation for this chip is allegedly released */ /* However I have not seen it, not have I managed to contact */ -/* anyone who has. HOWEVER the chip bears a striking resemblence */ +/* anyone who has. HOWEVER the chip bears a striking resemblance */ /* to the IrDA controller in the Toshiba RISC TMPR3922 chip */ /* the documentation for this is freely available at */ /* http://www.madingley.org/james/resources/toshoboe/TMPR3922.pdf */ diff --git a/drivers/net/irda/girbil-sir.c b/drivers/net/irda/girbil-sir.c index a31b8fa8aaa..96cdecff349 100644 --- a/drivers/net/irda/girbil-sir.c +++ b/drivers/net/irda/girbil-sir.c @@ -38,7 +38,7 @@ static int girbil_change_speed(struct sir_dev *dev, unsigned speed); /* Control register 1 */ #define GIRBIL_TXEN 0x01 /* Enable transmitter */ #define GIRBIL_RXEN 0x02 /* Enable receiver */ -#define GIRBIL_ECAN 0x04 /* Cancel self emmited data */ +#define GIRBIL_ECAN 0x04 /* Cancel self emitted data */ #define GIRBIL_ECHO 0x08 /* Echo control characters */ /* LED Current Register (0x2) */ diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c index e4ea61944c2..d9267cb98a2 100644 --- a/drivers/net/irda/irda-usb.c +++ b/drivers/net/irda/irda-usb.c @@ -370,7 +370,7 @@ static void speed_bulk_callback(struct urb *urb) /* urb is now available */ //urb->status = 0; -> tested above - /* New speed and xbof is now commited in hardware */ + /* New speed and xbof is now committed in hardware */ self->new_speed = -1; self->new_xbofs = -1; @@ -602,7 +602,7 @@ static void write_bulk_callback(struct urb *urb) IRDA_DEBUG(1, "%s(), Changing speed now...\n", __func__); irda_usb_change_speed_xbofs(self); } else { - /* New speed and xbof is now commited in hardware */ + /* New speed and xbof is now committed in hardware */ self->new_speed = -1; self->new_xbofs = -1; /* Done, waiting for next packet */ diff --git a/drivers/net/irda/mcs7780.c b/drivers/net/irda/mcs7780.c index cc821de2c96..be52bfed66a 100644 --- a/drivers/net/irda/mcs7780.c +++ b/drivers/net/irda/mcs7780.c @@ -588,7 +588,7 @@ static int mcs_speed_change(struct mcs_cb *mcs) mcs_get_reg(mcs, MCS_MODE_REG, &rval); - /* MINRXPW values recomended by MosChip */ + /* MINRXPW values recommended by MosChip */ if (mcs->new_speed <= 115200) { rval &= ~MCS_FIR; @@ -799,7 +799,7 @@ static void mcs_receive_irq(struct urb *urb) ret = usb_submit_urb(urb, GFP_ATOMIC); } -/* Transmit callback funtion. */ +/* Transmit callback function. */ static void mcs_send_irq(struct urb *urb) { struct mcs_cb *mcs = urb->context; @@ -811,7 +811,7 @@ static void mcs_send_irq(struct urb *urb) netif_wake_queue(ndev); } -/* Transmit callback funtion. */ +/* Transmit callback function. */ static netdev_tx_t mcs_hard_xmit(struct sk_buff *skb, struct net_device *ndev) { diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c index 559fe854d76..7a963d4e6d0 100644 --- a/drivers/net/irda/nsc-ircc.c +++ b/drivers/net/irda/nsc-ircc.c @@ -716,7 +716,7 @@ static int nsc_ircc_probe_338(nsc_chip_t *chip, chipio_t *info) int reg, com = 0; int pnp; - /* Read funtion enable register (FER) */ + /* Read function enable register (FER) */ outb(CFG_338_FER, cfg_base); reg = inb(cfg_base+1); diff --git a/drivers/net/irda/nsc-ircc.h b/drivers/net/irda/nsc-ircc.h index 7ba7738759b..32fa58211fa 100644 --- a/drivers/net/irda/nsc-ircc.h +++ b/drivers/net/irda/nsc-ircc.h @@ -135,7 +135,7 @@ #define LSR_TXRDY 0x20 /* Transmitter ready */ #define LSR_TXEMP 0x40 /* Transmitter empty */ -#define ASCR 0x07 /* Auxillary Status and Control Register */ +#define ASCR 0x07 /* Auxiliary Status and Control Register */ #define ASCR_RXF_TOUT 0x01 /* Rx FIFO timeout */ #define ASCR_FEND_INF 0x02 /* Frame end bytes in rx FIFO */ #define ASCR_S_EOT 0x04 /* Set end of transmission */ diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c index c192c31e4c5..001ed0a255f 100644 --- a/drivers/net/irda/pxaficp_ir.c +++ b/drivers/net/irda/pxaficp_ir.c @@ -40,7 +40,7 @@ #define ICCR0_AME (1 << 7) /* Address match enable */ #define ICCR0_TIE (1 << 6) /* Transmit FIFO interrupt enable */ -#define ICCR0_RIE (1 << 5) /* Recieve FIFO interrupt enable */ +#define ICCR0_RIE (1 << 5) /* Receive FIFO interrupt enable */ #define ICCR0_RXE (1 << 4) /* Receive enable */ #define ICCR0_TXE (1 << 3) /* Transmit enable */ #define ICCR0_TUS (1 << 2) /* Transmit FIFO underrun select */ @@ -483,7 +483,7 @@ static irqreturn_t pxa_irda_fir_irq(int irq, void *dev_id) } if (icsr0 & ICSR0_EIF) { - /* An error in FIFO occured, or there is a end of frame */ + /* An error in FIFO occurred, or there is a end of frame */ pxa_irda_fir_irq_eif(si, dev, icsr0); } diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c index 1c1677cfea2..8800e1fe412 100644 --- a/drivers/net/irda/smsc-ircc2.c +++ b/drivers/net/irda/smsc-ircc2.c @@ -1582,7 +1582,7 @@ static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev) int iobase; int iir, lsr; - /* Already locked comming here in smsc_ircc_interrupt() */ + /* Already locked coming here in smsc_ircc_interrupt() */ /*spin_lock(&self->lock);*/ iobase = self->io.sir_base; diff --git a/drivers/net/irda/via-ircc.c b/drivers/net/irda/via-ircc.c index 186cd28a61c..f504b262ba3 100644 --- a/drivers/net/irda/via-ircc.c +++ b/drivers/net/irda/via-ircc.c @@ -29,7 +29,7 @@ F02 Oct/28/02: Add SB device ID for 3147 and 3177. 2004-02-16: <sda@bdit.de> - Removed unneeded 'legacy' pci stuff. -- Make sure SIR mode is set (hw_init()) before calling mode-dependant stuff. +- Make sure SIR mode is set (hw_init()) before calling mode-dependent stuff. - On speed change from core, don't send SIR frame with new speed. Use current speed and change speeds later. - Make module-param dongle_id actually work. @@ -334,7 +334,7 @@ static __devinit int via_ircc_open(struct pci_dev *pdev, chipio_t * info, self->io.dongle_id = dongle_id; /* The only value we must override it the baudrate */ - /* Maximum speeds and capabilities are dongle-dependant. */ + /* Maximum speeds and capabilities are dongle-dependent. */ switch( self->io.dongle_id ){ case 0x0d: self->qos.baud_rate.bits = diff --git a/drivers/net/irda/vlsi_ir.h b/drivers/net/irda/vlsi_ir.h index d66fab854bf..a076eb12534 100644 --- a/drivers/net/irda/vlsi_ir.h +++ b/drivers/net/irda/vlsi_ir.h @@ -209,7 +209,7 @@ enum vlsi_pio_irintr { IRINTR_ACTEN = 0x80, /* activity interrupt enable */ IRINTR_ACTIVITY = 0x40, /* activity monitor (traffic detected) */ IRINTR_RPKTEN = 0x20, /* receive packet interrupt enable*/ - IRINTR_RPKTINT = 0x10, /* rx-packet transfered from fifo to memory finished */ + IRINTR_RPKTINT = 0x10, /* rx-packet transferred from fifo to memory finished */ IRINTR_TPKTEN = 0x08, /* transmit packet interrupt enable */ IRINTR_TPKTINT = 0x04, /* last bit of tx-packet+crc shifted to ir-pulser */ IRINTR_OE_EN = 0x02, /* UART rx fifo overrun error interrupt enable */ @@ -739,7 +739,7 @@ typedef struct vlsi_irda_dev { /* the remapped error flags we use for returning from frame * post-processing in vlsi_process_tx/rx() after it was completed * by the hardware. These functions either return the >=0 number - * of transfered bytes in case of success or the negative (-) + * of transferred bytes in case of success or the negative (-) * of the or'ed error flags. */ |