diff options
Diffstat (limited to 'drivers/net/irda')
| -rw-r--r-- | drivers/net/irda/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/net/irda/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/irda/au1k_ir.c | 14 | ||||
| -rw-r--r-- | drivers/net/irda/donauboe.c | 2 | ||||
| -rw-r--r-- | drivers/net/irda/sh_sir.c | 823 | ||||
| -rw-r--r-- | drivers/net/irda/via-ircc.c | 2 | ||||
| -rw-r--r-- | drivers/net/irda/vlsi_ir.c | 2 |
7 files changed, 842 insertions, 12 deletions
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig index f7638422142..af10e97345c 100644 --- a/drivers/net/irda/Kconfig +++ b/drivers/net/irda/Kconfig @@ -64,6 +64,16 @@ endchoice comment "Dongle support" +config SH_SIR + tristate "SuperH SIR on UART" + depends on IRDA && SUPERH && \ + (CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7723 || \ + CPU_SUBTYPE_SH7724) + default n + help + Say Y here if your want to enable SIR function on SuperH UART + devices. + config DONGLE bool "Serial dongle support" depends on IRTTY_SIR diff --git a/drivers/net/irda/Makefile b/drivers/net/irda/Makefile index d82e1e3bd8c..e030d47e279 100644 --- a/drivers/net/irda/Makefile +++ b/drivers/net/irda/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_AU1000_FIR) += au1k_ir.o # SIR drivers obj-$(CONFIG_IRTTY_SIR) += irtty-sir.o sir-dev.o obj-$(CONFIG_BFIN_SIR) += bfin_sir.o +obj-$(CONFIG_SH_SIR) += sh_sir.o # dongle drivers for SIR drivers obj-$(CONFIG_ESI_DONGLE) += esi-sir.o obj-$(CONFIG_TEKRAM_DONGLE) += tekram-sir.o diff --git a/drivers/net/irda/au1k_ir.c b/drivers/net/irda/au1k_ir.c index 9b2eebdbb25..b5cbd39d068 100644 --- a/drivers/net/irda/au1k_ir.c +++ b/drivers/net/irda/au1k_ir.c @@ -36,6 +36,7 @@ #include <asm/pb1000.h> #elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) #include <asm/db1x00.h> +#include <asm/mach-db1x00/bcsr.h> #else #error au1k_ir: unsupported board #endif @@ -66,10 +67,6 @@ static char version[] __devinitdata = #define RUN_AT(x) (jiffies + (x)) -#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) -static BCSR * const bcsr = (BCSR *)0xAE000000; -#endif - static DEFINE_SPINLOCK(ir_lock); /* @@ -282,9 +279,8 @@ static int au1k_irda_net_init(struct net_device *dev) #if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) /* power on */ - bcsr->resets &= ~BCSR_RESETS_IRDA_MODE_MASK; - bcsr->resets |= BCSR_RESETS_IRDA_MODE_FULL; - au_sync(); + bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK, + BCSR_RESETS_IRDA_MODE_FULL); #endif return 0; @@ -720,14 +716,14 @@ au1k_irda_set_speed(struct net_device *dev, int speed) if (speed == 4000000) { #if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) - bcsr->resets |= BCSR_RESETS_FIR_SEL; + bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_FIR_SEL); #else /* Pb1000 and Pb1100 */ writel(1<<13, CPLD_AUX1); #endif } else { #if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) - bcsr->resets &= ~BCSR_RESETS_FIR_SEL; + bcsr_mod(BCSR_RESETS, BCSR_RESETS_FIR_SEL, 0); #else /* Pb1000 and Pb1100 */ writel(readl(CPLD_AUX1) & ~(1<<13), CPLD_AUX1); #endif diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c index 2d7b5c1d557..b7e6625ca75 100644 --- a/drivers/net/irda/donauboe.c +++ b/drivers/net/irda/donauboe.c @@ -184,7 +184,7 @@ #define CONFIG0H_DMA_ON_NORX CONFIG0H_DMA_OFF| OBOE_CONFIG0H_ENDMAC #define CONFIG0H_DMA_ON CONFIG0H_DMA_ON_NORX | OBOE_CONFIG0H_ENRX -static struct pci_device_id toshoboe_pci_tbl[] = { +static DEFINE_PCI_DEVICE_TABLE(toshoboe_pci_tbl) = { { PCI_VENDOR_ID_TOSHIBA, PCI_DEVICE_ID_FIR701, PCI_ANY_ID, PCI_ANY_ID, }, { PCI_VENDOR_ID_TOSHIBA, PCI_DEVICE_ID_FIRD01, PCI_ANY_ID, PCI_ANY_ID, }, { } /* Terminating entry */ diff --git a/drivers/net/irda/sh_sir.c b/drivers/net/irda/sh_sir.c new file mode 100644 index 00000000000..d7c983dc91a --- /dev/null +++ b/drivers/net/irda/sh_sir.c @@ -0,0 +1,823 @@ +/* + * SuperH IrDA Driver + * + * Copyright (C) 2009 Renesas Solutions Corp. + * Kuninori Morimoto <morimoto.kuninori@renesas.com> + * + * Based on bfin_sir.c + * Copyright 2006-2009 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <net/irda/wrapper.h> +#include <net/irda/irda_device.h> +#include <asm/clock.h> + +#define DRIVER_NAME "sh_sir" + +#define RX_PHASE (1 << 0) +#define TX_PHASE (1 << 1) +#define TX_COMP_PHASE (1 << 2) /* tx complete */ +#define NONE_PHASE (1 << 31) + +#define IRIF_RINTCLR 0x0016 /* DMA rx interrupt source clear */ +#define IRIF_TINTCLR 0x0018 /* DMA tx interrupt source clear */ +#define IRIF_SIR0 0x0020 /* IrDA-SIR10 control */ +#define IRIF_SIR1 0x0022 /* IrDA-SIR10 baudrate error correction */ +#define IRIF_SIR2 0x0024 /* IrDA-SIR10 baudrate count */ +#define IRIF_SIR3 0x0026 /* IrDA-SIR10 status */ +#define IRIF_SIR_FRM 0x0028 /* Hardware frame processing set */ +#define IRIF_SIR_EOF 0x002A /* EOF value */ +#define IRIF_SIR_FLG 0x002C /* Flag clear */ +#define IRIF_UART_STS2 0x002E /* UART status 2 */ +#define IRIF_UART0 0x0030 /* UART control */ +#define IRIF_UART1 0x0032 /* UART status */ +#define IRIF_UART2 0x0034 /* UART mode */ +#define IRIF_UART3 0x0036 /* UART transmit data */ +#define IRIF_UART4 0x0038 /* UART receive data */ +#define IRIF_UART5 0x003A /* UART interrupt mask */ +#define IRIF_UART6 0x003C /* UART baud rate error correction */ +#define IRIF_UART7 0x003E /* UART baud rate count set */ +#define IRIF_CRC0 0x0040 /* CRC engine control */ +#define IRIF_CRC1 0x0042 /* CRC engine input data */ +#define IRIF_CRC2 0x0044 /* CRC engine calculation */ +#define IRIF_CRC3 0x0046 /* CRC engine output data 1 */ +#define IRIF_CRC4 0x0048 /* CRC engine output data 2 */ + +/* IRIF_SIR0 */ +#define IRTPW (1 << 1) /* transmit pulse width select */ +#define IRERRC (1 << 0) /* Clear receive pulse width error */ + +/* IRIF_SIR3 */ +#define IRERR (1 << 0) /* received pulse width Error */ + +/* IRIF_SIR_FRM */ +#define EOFD (1 << 9) /* EOF detection flag */ +#define FRER (1 << 8) /* Frame Error bit */ +#define FRP (1 << 0) /* Frame processing set */ + +/* IRIF_UART_STS2 */ +#define IRSME (1 << 6) /* Receive Sum Error flag */ +#define IROVE (1 << 5) /* Receive Overrun Error flag */ +#define IRFRE (1 << 4) /* Receive Framing Error flag */ +#define IRPRE (1 << 3) /* Receive Parity Error flag */ + +/* IRIF_UART0_*/ +#define TBEC (1 << 2) /* Transmit Data Clear */ +#define RIE (1 << 1) /* Receive Enable */ +#define TIE (1 << 0) /* Transmit Enable */ + +/* IRIF_UART1 */ +#define URSME (1 << 6) /* Receive Sum Error Flag */ +#define UROVE (1 << 5) /* Receive Overrun Error Flag */ +#define URFRE (1 << 4) /* Receive Framing Error Flag */ +#define URPRE (1 << 3) /* Receive Parity Error Flag */ +#define RBF (1 << 2) /* Receive Buffer Full Flag */ +#define TSBE (1 << 1) /* Transmit Shift Buffer Empty Flag */ +#define TBE (1 << 0) /* Transmit Buffer Empty flag */ +#define TBCOMP (TSBE | TBE) + +/* IRIF_UART5 */ +#define RSEIM (1 << 6) /* Receive Sum Error Flag IRQ Mask */ +#define RBFIM (1 << 2) /* Receive Buffer Full Flag IRQ Mask */ +#define TSBEIM (1 << 1) /* Transmit Shift Buffer Empty Flag IRQ Mask */ +#define TBEIM (1 << 0) /* Transmit Buffer Empty Flag IRQ Mask */ +#define RX_MASK (RSEIM | RBFIM) + +/* IRIF_CRC0 */ +#define CRC_RST (1 << 15) /* CRC Engine Reset */ +#define CRC_CT_MASK 0x0FFF + +/************************************************************************ + + + structure + + +************************************************************************/ +struct sh_sir_self { + void __iomem *membase; + unsigned int irq; + struct clk *clk; + + struct net_device *ndev; + + struct irlap_cb *irlap; + struct qos_info qos; + + iobuff_t tx_buff; + iobuff_t rx_buff; +}; + +/************************************************************************ + + + common function + + +************************************************************************/ +static void sh_sir_write(struct sh_sir_self *self, u32 offset, u16 data) +{ + iowrite16(data, self->membase + offset); +} + +static u16 sh_sir_read(struct sh_sir_self *self, u32 offset) +{ + return ioread16(self->membase + offset); +} + +static void sh_sir_update_bits(struct sh_sir_self *self, u32 offset, + u16 mask, u16 data) +{ + u16 old, new; + + old = sh_sir_read(self, offset); + new = (old & ~mask) | data; + if (old != new) + sh_sir_write(self, offset, new); +} + +/************************************************************************ + + + CRC function + + +************************************************************************/ +static void sh_sir_crc_reset(struct sh_sir_self *self) +{ + sh_sir_write(self, IRIF_CRC0, CRC_RST); +} + +static void sh_sir_crc_add(struct sh_sir_self *self, u8 data) +{ + sh_sir_write(self, IRIF_CRC1, (u16)data); +} + +static u16 sh_sir_crc_cnt(struct sh_sir_self *self) +{ + return CRC_CT_MASK & sh_sir_read(self, IRIF_CRC0); +} + +static u16 sh_sir_crc_out(struct sh_sir_self *self) +{ + return sh_sir_read(self, IRIF_CRC4); +} + +static int sh_sir_crc_init(struct sh_sir_self *self) +{ + struct device *dev = &self->ndev->dev; + int ret = -EIO; + u16 val; + + sh_sir_crc_reset(self); + + sh_sir_crc_add(self, 0xCC); + sh_sir_crc_add(self, 0xF5); + sh_sir_crc_add(self, 0xF1); + sh_sir_crc_add(self, 0xA7); + + val = sh_sir_crc_cnt(self); + if (4 != val) { + dev_err(dev, "CRC count error %x\n", val); + goto crc_init_out; + } + + val = sh_sir_crc_out(self); + if (0x51DF != val) { + dev_err(dev, "CRC result error%x\n", val); + goto crc_init_out; + } + + ret = 0; + +crc_init_out: + + sh_sir_crc_reset(self); + return ret; +} + +/************************************************************************ + + + baud rate functions + + +************************************************************************/ +#define SCLK_BASE 1843200 /* 1.8432MHz */ + +static u32 sh_sir_find_sclk(struct clk *irda_clk) +{ + struct cpufreq_frequency_table *freq_table = irda_clk->freq_table; + struct clk *pclk = clk_get(NULL, "peripheral_clk"); + u32 limit, min = 0xffffffff, tmp; + int i, index = 0; + + limit = clk_get_rate(pclk); + clk_put(pclk); + + /* IrDA can not set over peripheral_clk */ + for (i = 0; + freq_table[i].frequency != CPUFREQ_TABLE_END; + i++) { + u32 freq = freq_table[i].frequency; + + if (freq == CPUFREQ_ENTRY_INVALID) + continue; + + /* IrDA should not over peripheral_clk */ + if (freq > limit) + continue; + + tmp = freq % SCLK_BASE; + if (tmp < min) { + min = tmp; + index = i; + } + } + + return freq_table[index].frequency; +} + +#define ERR_ROUNDING(a) ((a + 5000) / 10000) +static int sh_sir_set_baudrate(struct sh_sir_self *self, u32 baudrate) +{ + struct clk *clk; + struct device *dev = &self->ndev->dev; + u32 rate; + u16 uabca, uabc; + u16 irbca, irbc; + u32 min, rerr, tmp; + int i; + + /* Baud Rate Error Correction x 10000 */ + u32 rate_err_array[] = { + 0000, 0625, 1250, 1875, + 2500, 3125, 3750, 4375, + 5000, 5625, 6250, 6875, + 7500, 8125, 8750, 9375, + }; + + /* + * FIXME + * + * it support 9600 only now + */ + switch (baudrate) { + case 9600: + break; + default: + dev_err(dev, "un-supported baudrate %d\n", baudrate); + return -EIO; + } + + clk = clk_get(NULL, "irda_clk"); + if (!clk) { + dev_err(dev, "can not get irda_clk\n"); + return -EIO; + } + + clk_set_rate(clk, sh_sir_find_sclk(clk)); + rate = clk_get_rate(clk); + clk_put(clk); + + dev_dbg(dev, "selected sclk = %d\n", rate); + + /* + * CALCULATION + * + * 1843200 = system rate / (irbca + (irbc + 1)) + */ + + irbc = rate / SCLK_BASE; + + tmp = rate - (SCLK_BASE * irbc); + tmp *= 10000; + + rerr = tmp / SCLK_BASE; + + min = 0xffffffff; + irbca = 0; + for (i = 0; i < ARRAY_SIZE(rate_err_array); i++) { + tmp = abs(rate_err_array[i] - rerr); + if (min > tmp) { + min = tmp; + irbca = i; + } + } + + tmp = rate / (irbc + ERR_ROUNDING(rate_err_array[irbca])); + if ((SCLK_BASE / 100) < abs(tmp - SCLK_BASE)) + dev_warn(dev, "IrDA freq error margin over %d\n", tmp); + + dev_dbg(dev, "target = %d, result = %d, infrared = %d.%d\n", + SCLK_BASE, tmp, irbc, rate_err_array[irbca]); + + irbca = (irbca & 0xF) << 4; + irbc = (irbc - 1) & 0xF; + + if (!irbc) { + dev_err(dev, "sh_sir can not set 0 in IRIF_SIR2\n"); + return -EIO; + } + + sh_sir_write(self, IRIF_SIR0, IRTPW | IRERRC); + sh_sir_write(self, IRIF_SIR1, irbca); + sh_sir_write(self, IRIF_SIR2, irbc); + + /* + * CALCULATION + * + * BaudRate[bps] = system rate / (uabca + (uabc + 1) x 16) + */ + + uabc = rate / baudrate; + uabc = (uabc / 16) - 1; + uabc = (uabc + 1) * 16; + + tmp = rate - (uabc * baudrate); + tmp *= 10000; + + rerr = tmp / baudrate; + + min = 0xffffffff; + uabca = 0; + for (i = 0; i < ARRAY_SIZE(rate_err_array); i++) { + tmp = abs(rate_err_array[i] - rerr); + if (min > tmp) { + min = tmp; + uabca = i; + } + } + + tmp = rate / (uabc + ERR_ROUNDING(rate_err_array[uabca])); + if ((baudrate / 100) < abs(tmp - baudrate)) + dev_warn(dev, "UART freq error margin over %d\n", tmp); + + dev_dbg(dev, "target = %d, result = %d, uart = %d.%d\n", + baudrate, tmp, + uabc, rate_err_array[uabca]); + + uabca = (uabca & 0xF) << 4; + uabc = (uabc / 16) - 1; + + sh_sir_write(self, IRIF_UART6, uabca); + sh_sir_write(self, IRIF_UART7, uabc); + + return 0; +} + +/************************************************************************ + + + iobuf function + + +************************************************************************/ +static int __sh_sir_init_iobuf(iobuff_t *io, int size) +{ + io->head = kmalloc(size, GFP_KERNEL); + if (!io->head) + return -ENOMEM; + + io->truesize = size; + io->in_frame = FALSE; + io->state = OUTSIDE_FRAME; + io->data = io->head; + + return 0; +} + +static void sh_sir_remove_iobuf(struct sh_sir_self *self) +{ + kfree(self->rx_buff.head); + kfree(self->tx_buff.head); + + self->rx_buff.head = NULL; + self->tx_buff.head = NULL; +} + +static int sh_sir_init_iobuf(struct sh_sir_self *self, int rxsize, int txsize) +{ + int err = -ENOMEM; + + if (self->rx_buff.head || + self->tx_buff.head) { + dev_err(&self->ndev->dev, "iobuff has already existed."); + return err; + } + + err = __sh_sir_init_iobuf(&self->rx_buff, rxsize); + if (err) + goto iobuf_err; + + err = __sh_sir_init_iobuf(&self->tx_buff, txsize); + +iobuf_err: + if (err) + sh_sir_remove_iobuf(self); + + return err; +} + +/************************************************************************ + + + status function + + +************************************************************************/ +static void sh_sir_clear_all_err(struct sh_sir_self *self) +{ + /* Clear error flag for receive pulse width */ + sh_sir_update_bits(self, IRIF_SIR0, IRERRC, IRERRC); + + /* Clear frame / EOF error flag */ + sh_sir_write(self, IRIF_SIR_FLG, 0xffff); + + /* Clear all status error */ + sh_sir_write(self, IRIF_UART_STS2, 0); +} + +static void sh_sir_set_phase(struct sh_sir_self *self, int phase) +{ + u16 uart5 = 0; + u16 uart0 = 0; + + switch (phase) { + case TX_PHASE: + uart5 = TBEIM; + uart0 = TBEC | TIE; + break; + case TX_COMP_PHASE: + uart5 = TSBEIM; + uart0 = TIE; + break; + case RX_PHASE: + uart5 = RX_MASK; + uart0 = RIE; + break; + default: + break; + } + + sh_sir_write(self, IRIF_UART5, uart5); + sh_sir_write(self, IRIF_UART0, uart0); +} + +static int sh_sir_is_which_phase(struct sh_sir_self *self) +{ + u16 val = sh_sir_read(self, IRIF_UART5); + + if (val & TBEIM) + return TX_PHASE; + + if (val & TSBEIM) + return TX_COMP_PHASE; + + if (val & RX_MASK) + return RX_PHASE; + + return NONE_PHASE; +} + +static void sh_sir_tx(struct sh_sir_self *self, int phase) +{ + switch (phase) { + case TX_PHASE: + if (0 >= self->tx_buff.len) { + sh_sir_set_phase(self, TX_COMP_PHASE); + } else { + sh_sir_write(self, IRIF_UART3, self->tx_buff.data[0]); + self->tx_buff.len--; + self->tx_buff.data++; + } + break; + case TX_COMP_PHASE: + sh_sir_set_phase(self, RX_PHASE); + netif_wake_queue(self->ndev); + break; + default: + dev_err(&self->ndev->dev, "should not happen\n"); + break; + } +} + +static int sh_sir_read_data(struct sh_sir_self *self) +{ + u16 val; + int timeout = 1024; + + while (timeout--) { + val = sh_sir_read(self, IRIF_UART1); + + /* data get */ + if (val & RBF) { + if (val & (URSME | UROVE | URFRE | URPRE)) + break; + + return (int)sh_sir_read(self, IRIF_UART4); + } + + udelay(1); + } + + dev_err(&self->ndev->dev, "UART1 %04x : STATUS %04x\n", + val, sh_sir_read(self, IRIF_UART_STS2)); + + /* read data register for clear error */ + sh_sir_read(self, IRIF_UART4); + + return -1; +} + +static void sh_sir_rx(struct sh_sir_self *self) +{ + int timeout = 1024; + int data; + + while (timeout--) { + data = sh_sir_read_data(self); + if (data < 0) + break; + + async_unwrap_char(self->ndev, &self->ndev->stats, + &self->rx_buff, (u8)data); + self->ndev->last_rx = jiffies; + + if (EOFD & sh_sir_read(self, IRIF_SIR_FRM)) + continue; + + break; + } +} + +static irqreturn_t sh_sir_irq(int irq, void *dev_id) +{ + struct sh_sir_self *self = dev_id; + struct device *dev = &self->ndev->dev; + int phase = sh_sir_is_which_phase(self); + + switch (phase) { + case TX_COMP_PHASE: + case TX_PHASE: + sh_sir_tx(self, phase); + break; + case RX_PHASE: + if (sh_sir_read(self, IRIF_SIR3)) + dev_err(dev, "rcv pulse width error occurred\n"); + + sh_sir_rx(self); + sh_sir_clear_all_err(self); + break; + default: + dev_err(dev, "unknown interrupt\n"); + } + + return IRQ_HANDLED; +} + +/************************************************************************ + + + net_device_ops function + + +************************************************************************/ +static int sh_sir_hard_xmit(struct sk_buff *skb, struct net_device *ndev) +{ + struct sh_sir_self *self = netdev_priv(ndev); + int speed = irda_get_next_speed(skb); + + if ((0 < speed) && + (9600 != speed)) { + dev_err(&ndev->dev, "support 9600 only (%d)\n", speed); + return -EIO; + } + + netif_stop_queue(ndev); + + self->tx_buff.data = self->tx_buff.head; + self->tx_buff.len = 0; + if (skb->len) + self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data, + self->tx_buff.truesize); + + sh_sir_set_phase(self, TX_PHASE); + dev_kfree_skb(skb); + + return 0; +} + +static int sh_sir_ioctl(struct net_device *ndev, struct ifreq *ifreq, int cmd) +{ + /* + * FIXME + * + * This function is needed for irda framework. + * But nothing to do now + */ + return 0; +} + +static struct net_device_stats *sh_sir_stats(struct net_device *ndev) +{ + struct sh_sir_self *self = netdev_priv(ndev); + + return &self->ndev->stats; +} + +static int sh_sir_open(struct net_device *ndev) +{ + struct sh_sir_self *self = netdev_priv(ndev); + int err; + + clk_enable(self->clk); + err = sh_sir_crc_init(self); + if (err) + goto open_err; + + sh_sir_set_baudrate(self, 9600); + + self->irlap = irlap_open(ndev, &self->qos, DRIVER_NAME); + if (!self->irlap) + goto open_err; + + /* + * Now enable the interrupt then start the queue + */ + sh_sir_update_bits(self, IRIF_SIR_FRM, FRP, FRP); + sh_sir_read(self, IRIF_UART1); /* flag clear */ + sh_sir_read(self, IRIF_UART4); /* flag clear */ + sh_sir_set_phase(self, RX_PHASE); + + netif_start_queue(ndev); + + dev_info(&self->ndev->dev, "opened\n"); + + return 0; + +open_err: + clk_disable(self->clk); + + return err; +} + +static int sh_sir_stop(struct net_device *ndev) +{ + struct sh_sir_self *self = netdev_priv(ndev); + + /* Stop IrLAP */ + if (self->irlap) { + irlap_close(self->irlap); + self->irlap = NULL; + } + + netif_stop_queue(ndev); + + dev_info(&ndev->dev, "stoped\n"); + + return 0; +} + +static const struct net_device_ops sh_sir_ndo = { + .ndo_open = sh_sir_open, + .ndo_stop = sh_sir_stop, + .ndo_start_xmit = sh_sir_hard_xmit, + .ndo_do_ioctl = sh_sir_ioctl, + .ndo_get_stats = sh_sir_stats, +}; + +/************************************************************************ + + + platform_driver function + + +************************************************************************/ +static int __devinit sh_sir_probe(struct platform_device *pdev) +{ + struct net_device *ndev; + struct sh_sir_self *self; + struct resource *res; + char clk_name[8]; + void __iomem *base; + unsigned int irq; + int err = -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + irq = platform_get_irq(pdev, 0); + if (!res || irq < 0) { + dev_err(&pdev->dev, "Not enough platform resources.\n"); + goto exit; + } + + ndev = alloc_irdadev(sizeof(*self)); + if (!ndev) + goto exit; + + base = ioremap_nocache(res->start, resource_size(res)); + if (!base) { + err = -ENXIO; + dev_err(&pdev->dev, "Unable to ioremap.\n"); + goto err_mem_1; + } + + self = netdev_priv(ndev); + err = sh_sir_init_iobuf(self, IRDA_SKB_MAX_MTU, IRDA_SIR_MAX_FRAME); + if (err) + goto err_mem_2; + + snprintf(clk_name, sizeof(clk_name), "irda%d", pdev->id); + self->clk = clk_get(&pdev->dev, clk_name); + if (IS_ERR(self->clk)) { + dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name); + goto err_mem_3; + } + + irda_init_max_qos_capabilies(&self->qos); + + ndev->netdev_ops = &sh_sir_ndo; + ndev->irq = irq; + + self->membase = base; + self->ndev = ndev; + self->qos.baud_rate.bits &= IR_9600; /* FIXME */ + self->qos.min_turn_time.bits = 1; /* 10 ms or more */ + + irda_qos_bits_to_value(&self->qos); + + err = register_netdev(ndev); + if (err) + goto err_mem_4; + + platform_set_drvdata(pdev, ndev); + + if (request_irq(irq, sh_sir_irq, IRQF_DISABLED, "sh_sir", self)) { + dev_warn(&pdev->dev, "Unable to attach sh_sir interrupt\n"); + goto err_mem_4; + } + + dev_info(&pdev->dev, "SuperH IrDA probed\n"); + + goto exit; + +err_mem_4: + clk_put(self->clk); +err_mem_3: + sh_sir_remove_iobuf(self); +err_mem_2: + iounmap(self->membase); +err_mem_1: + free_netdev(ndev); +exit: + return err; +} + +static int __devexit sh_sir_remove(struct platform_device *pdev) +{ + struct net_device *ndev = platform_get_drvdata(pdev); + struct sh_sir_self *self = netdev_priv(ndev); + + if (!self) + return 0; + + unregister_netdev(ndev); + clk_put(self->clk); + sh_sir_remove_iobuf(self); + iounmap(self->membase); + free_netdev(ndev); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver sh_sir_driver = { + .probe = sh_sir_probe, + .remove = __devexit_p(sh_sir_remove), + .driver = { + .name = DRIVER_NAME, + }, +}; + +static int __init sh_sir_init(void) +{ + return platform_driver_register(&sh_sir_driver); +} + +static void __exit sh_sir_exit(void) +{ + platform_driver_unregister(&sh_sir_driver); +} + +module_init(sh_sir_init); +module_exit(sh_sir_exit); + +MODULE_AUTHOR("Kuninori Morimoto <morimoto.kuninori@renesas.com>"); +MODULE_DESCRIPTION("SuperH IrDA driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/irda/via-ircc.c b/drivers/net/irda/via-ircc.c index fddb4efd545..6533c010cf5 100644 --- a/drivers/net/irda/via-ircc.c +++ b/drivers/net/irda/via-ircc.c @@ -121,7 +121,7 @@ static void iodelay(int udelay) } } -static struct pci_device_id via_pci_tbl[] = { +static DEFINE_PCI_DEVICE_TABLE(via_pci_tbl) = { { PCI_VENDOR_ID_VIA, 0x8231, PCI_ANY_ID, PCI_ANY_ID,0,0,0 }, { PCI_VENDOR_ID_VIA, 0x3109, PCI_ANY_ID, PCI_ANY_ID,0,0,1 }, { PCI_VENDOR_ID_VIA, 0x3074, PCI_ANY_ID, PCI_ANY_ID,0,0,2 }, diff --git a/drivers/net/irda/vlsi_ir.c b/drivers/net/irda/vlsi_ir.c index bd3c6b5ee76..209d4bcface 100644 --- a/drivers/net/irda/vlsi_ir.c +++ b/drivers/net/irda/vlsi_ir.c @@ -59,7 +59,7 @@ MODULE_LICENSE("GPL"); static /* const */ char drivername[] = DRIVER_NAME; -static struct pci_device_id vlsi_irda_table [] = { +static DEFINE_PCI_DEVICE_TABLE(vlsi_irda_table) = { { .class = PCI_CLASS_WIRELESS_IRDA << 8, .class_mask = PCI_CLASS_SUBCLASS_MASK << 8, |