aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/irda
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/irda')
-rw-r--r--drivers/net/irda/Kconfig12
-rw-r--r--drivers/net/irda/Makefile1
-rw-r--r--drivers/net/irda/donauboe.c2
-rw-r--r--drivers/net/irda/ep7211_ir.c11
-rw-r--r--drivers/net/irda/irda-usb.c5
-rw-r--r--drivers/net/irda/irtty-sir.c19
-rw-r--r--drivers/net/irda/nsc-ircc.c320
-rw-r--r--drivers/net/irda/nsc-ircc.h2
-rw-r--r--drivers/net/irda/sir_dongle.c19
-rw-r--r--drivers/net/irda/toim3232-sir.c375
-rw-r--r--drivers/net/irda/vlsi_ir.c2
11 files changed, 670 insertions, 98 deletions
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index 7a081346f07..5e6d0075299 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -64,6 +64,14 @@ config TEKRAM_DONGLE
dongles you will have to start irattach like this:
"irattach -d tekram".
+config TOIM3232_DONGLE
+ tristate "TOIM3232 IrDa dongle"
+ depends on DONGLE && IRDA
+ help
+ Say Y here if you want to build support for the Vishay/Temic
+ TOIM3232 and TOIM4232 based dongles.
+ To compile it as a module, choose M here.
+
config LITELINK_DONGLE
tristate "Parallax LiteLink dongle"
depends on DONGLE && IRDA
@@ -283,7 +291,7 @@ config USB_IRDA
Say Y here if you want to build support for the USB IrDA FIR Dongle
device driver. To compile it as a module, choose M here: the module
will be called irda-usb. IrDA-USB support the various IrDA USB
- dongles available and most of their pecularities. Those dongles
+ dongles available and most of their peculiarities. Those dongles
plug in the USB port of your computer, are plug and play, and
support SIR and FIR (4Mbps) speeds. On the other hand, those
dongles tend to be less efficient than a FIR chipset.
@@ -360,7 +368,7 @@ config ALI_FIR
help
Say Y here if you want to build support for the ALi M5123 FIR
Controller. The ALi M5123 FIR Controller is embedded in ALi M1543C,
- M1535, M1535D, M1535+, M1535D Sourth Bridge. This driver supports
+ M1535, M1535D, M1535+, M1535D South Bridge. This driver supports
SIR, MIR and FIR (4Mbps) speeds.
To compile it as a module, choose M here: the module will be called
diff --git a/drivers/net/irda/Makefile b/drivers/net/irda/Makefile
index 72cbfdc9cfc..27ab75f2079 100644
--- a/drivers/net/irda/Makefile
+++ b/drivers/net/irda/Makefile
@@ -43,6 +43,7 @@ obj-$(CONFIG_OLD_BELKIN_DONGLE) += old_belkin-sir.o
obj-$(CONFIG_MCP2120_DONGLE) += mcp2120-sir.o
obj-$(CONFIG_ACT200L_DONGLE) += act200l-sir.o
obj-$(CONFIG_MA600_DONGLE) += ma600-sir.o
+obj-$(CONFIG_TOIM3232_DONGLE) += toim3232-sir.o
# The SIR helper module
sir-dev-objs := sir_dev.o sir_dongle.o sir_kthread.o
diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c
index 3137592d60c..910c0cab35b 100644
--- a/drivers/net/irda/donauboe.c
+++ b/drivers/net/irda/donauboe.c
@@ -1778,7 +1778,7 @@ static struct pci_driver donauboe_pci_driver = {
static int __init
donauboe_init (void)
{
- return pci_module_init(&donauboe_pci_driver);
+ return pci_register_driver(&donauboe_pci_driver);
}
static void __exit
diff --git a/drivers/net/irda/ep7211_ir.c b/drivers/net/irda/ep7211_ir.c
index 31896262d21..4cba38f7e4a 100644
--- a/drivers/net/irda/ep7211_ir.c
+++ b/drivers/net/irda/ep7211_ir.c
@@ -8,6 +8,7 @@
#include <linux/delay.h>
#include <linux/tty.h>
#include <linux/init.h>
+#include <linux/spinlock.h>
#include <net/irda/irda.h>
#include <net/irda/irda_device.h>
@@ -23,6 +24,8 @@ static void ep7211_ir_close(dongle_t *self);
static int ep7211_ir_change_speed(struct irda_task *task);
static int ep7211_ir_reset(struct irda_task *task);
+static DEFINE_SPINLOCK(ep7211_lock);
+
static struct dongle_reg dongle = {
.type = IRDA_EP7211_IR,
.open = ep7211_ir_open,
@@ -36,7 +39,7 @@ static void ep7211_ir_open(dongle_t *self, struct qos_info *qos)
{
unsigned int syscon1, flags;
- save_flags(flags); cli();
+ spin_lock_irqsave(&ep7211_lock, flags);
/* Turn on the SIR encoder. */
syscon1 = clps_readl(SYSCON1);
@@ -46,14 +49,14 @@ static void ep7211_ir_open(dongle_t *self, struct qos_info *qos)
/* XXX: We should disable modem status interrupts on the first
UART (interrupt #14). */
- restore_flags(flags);
+ spin_unlock_irqrestore(&ep7211_lock, flags);
}
static void ep7211_ir_close(dongle_t *self)
{
unsigned int syscon1, flags;
- save_flags(flags); cli();
+ spin_lock_irqsave(&ep7211_lock, flags);
/* Turn off the SIR encoder. */
syscon1 = clps_readl(SYSCON1);
@@ -63,7 +66,7 @@ static void ep7211_ir_close(dongle_t *self)
/* XXX: If we've disabled the modem status interrupts, we should
reset them back to their original state. */
- restore_flags(flags);
+ spin_unlock_irqrestore(&ep7211_lock, flags);
}
/*
diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
index 8936058a3cc..6e2ec56cde0 100644
--- a/drivers/net/irda/irda-usb.c
+++ b/drivers/net/irda/irda-usb.c
@@ -740,7 +740,7 @@ static void irda_usb_receive(struct urb *urb, struct pt_regs *regs)
struct sk_buff *newskb;
struct sk_buff *dataskb;
struct urb *next_urb;
- int docopy;
+ unsigned int len, docopy;
IRDA_DEBUG(2, "%s(), len=%d\n", __FUNCTION__, urb->actual_length);
@@ -851,10 +851,11 @@ static void irda_usb_receive(struct urb *urb, struct pt_regs *regs)
dataskb->dev = self->netdev;
dataskb->mac.raw = dataskb->data;
dataskb->protocol = htons(ETH_P_IRDA);
+ len = dataskb->len;
netif_rx(dataskb);
/* Keep stats up to date */
- self->stats.rx_bytes += dataskb->len;
+ self->stats.rx_bytes += len;
self->stats.rx_packets++;
self->netdev->last_rx = jiffies;
diff --git a/drivers/net/irda/irtty-sir.c b/drivers/net/irda/irtty-sir.c
index 101750bf210..6a98b7ae497 100644
--- a/drivers/net/irda/irtty-sir.c
+++ b/drivers/net/irda/irtty-sir.c
@@ -33,6 +33,7 @@
#include <asm/uaccess.h>
#include <linux/smp_lock.h>
#include <linux/delay.h>
+#include <linux/mutex.h>
#include <net/irda/irda.h>
#include <net/irda/irda_device.h>
@@ -338,7 +339,7 @@ static inline void irtty_stop_receiver(struct tty_struct *tty, int stop)
/*****************************************************************/
/* serialize ldisc open/close with sir_dev */
-static DECLARE_MUTEX(irtty_sem);
+static DEFINE_MUTEX(irtty_mutex);
/* notifier from sir_dev when irda% device gets opened (ifup) */
@@ -348,11 +349,11 @@ static int irtty_start_dev(struct sir_dev *dev)
struct tty_struct *tty;
/* serialize with ldisc open/close */
- down(&irtty_sem);
+ mutex_lock(&irtty_mutex);
priv = dev->priv;
if (unlikely(!priv || priv->magic!=IRTTY_MAGIC)) {
- up(&irtty_sem);
+ mutex_unlock(&irtty_mutex);
return -ESTALE;
}
@@ -363,7 +364,7 @@ static int irtty_start_dev(struct sir_dev *dev)
/* Make sure we can receive more data */
irtty_stop_receiver(tty, FALSE);
- up(&irtty_sem);
+ mutex_unlock(&irtty_mutex);
return 0;
}
@@ -375,11 +376,11 @@ static int irtty_stop_dev(struct sir_dev *dev)
struct tty_struct *tty;
/* serialize with ldisc open/close */
- down(&irtty_sem);
+ mutex_lock(&irtty_mutex);
priv = dev->priv;
if (unlikely(!priv || priv->magic!=IRTTY_MAGIC)) {
- up(&irtty_sem);
+ mutex_unlock(&irtty_mutex);
return -ESTALE;
}
@@ -390,7 +391,7 @@ static int irtty_stop_dev(struct sir_dev *dev)
if (tty->driver->stop)
tty->driver->stop(tty);
- up(&irtty_sem);
+ mutex_unlock(&irtty_mutex);
return 0;
}
@@ -514,13 +515,13 @@ static int irtty_open(struct tty_struct *tty)
priv->dev = dev;
/* serialize with start_dev - in case we were racing with ifup */
- down(&irtty_sem);
+ mutex_lock(&irtty_mutex);
dev->priv = priv;
tty->disc_data = priv;
tty->receive_room = 65536;
- up(&irtty_sem);
+ mutex_unlock(&irtty_mutex);
IRDA_DEBUG(0, "%s - %s: irda line discipline opened\n", __FUNCTION__, tty->name);
diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c
index ee717d0e939..83141a3ff54 100644
--- a/drivers/net/irda/nsc-ircc.c
+++ b/drivers/net/irda/nsc-ircc.c
@@ -12,6 +12,7 @@
* Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no>
* Copyright (c) 1998 Lichen Wang, <lwang@actisys.com>
* Copyright (c) 1998 Actisys Corp., www.actisys.com
+ * Copyright (c) 2000-2004 Jean Tourrilhes <jt@hpl.hp.com>
* All Rights Reserved
*
* This program is free software; you can redistribute it and/or
@@ -53,14 +54,13 @@
#include <linux/init.h>
#include <linux/rtnetlink.h>
#include <linux/dma-mapping.h>
+#include <linux/pnp.h>
+#include <linux/platform_device.h>
#include <asm/io.h>
#include <asm/dma.h>
#include <asm/byteorder.h>
-#include <linux/pm.h>
-#include <linux/pm_legacy.h>
-
#include <net/irda/wrapper.h>
#include <net/irda/irda.h>
#include <net/irda/irda_device.h>
@@ -72,14 +72,27 @@
static char *driver_name = "nsc-ircc";
+/* Power Management */
+#define NSC_IRCC_DRIVER_NAME "nsc-ircc"
+static int nsc_ircc_suspend(struct platform_device *dev, pm_message_t state);
+static int nsc_ircc_resume(struct platform_device *dev);
+
+static struct platform_driver nsc_ircc_driver = {
+ .suspend = nsc_ircc_suspend,
+ .resume = nsc_ircc_resume,
+ .driver = {
+ .name = NSC_IRCC_DRIVER_NAME,
+ },
+};
+
/* Module parameters */
static int qos_mtt_bits = 0x07; /* 1 ms or more */
static int dongle_id;
/* Use BIOS settions by default, but user may supply module parameters */
-static unsigned int io[] = { ~0, ~0, ~0, ~0 };
-static unsigned int irq[] = { 0, 0, 0, 0, 0 };
-static unsigned int dma[] = { 0, 0, 0, 0, 0 };
+static unsigned int io[] = { ~0, ~0, ~0, ~0, ~0 };
+static unsigned int irq[] = { 0, 0, 0, 0, 0 };
+static unsigned int dma[] = { 0, 0, 0, 0, 0 };
static int nsc_ircc_probe_108(nsc_chip_t *chip, chipio_t *info);
static int nsc_ircc_probe_338(nsc_chip_t *chip, chipio_t *info);
@@ -87,6 +100,7 @@ static int nsc_ircc_probe_39x(nsc_chip_t *chip, chipio_t *info);
static int nsc_ircc_init_108(nsc_chip_t *chip, chipio_t *info);
static int nsc_ircc_init_338(nsc_chip_t *chip, chipio_t *info);
static int nsc_ircc_init_39x(nsc_chip_t *chip, chipio_t *info);
+static int nsc_ircc_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *id);
/* These are the known NSC chips */
static nsc_chip_t chips[] = {
@@ -101,11 +115,12 @@ static nsc_chip_t chips[] = {
/* Contributed by Jan Frey - IBM A30/A31 */
{ "PC8739x", { 0x2e, 0x4e, 0x0 }, 0x20, 0xea, 0xff,
nsc_ircc_probe_39x, nsc_ircc_init_39x },
+ { "IBM", { 0x2e, 0x4e, 0x0 }, 0x20, 0xf4, 0xff,
+ nsc_ircc_probe_39x, nsc_ircc_init_39x },
{ NULL }
};
-/* Max 4 instances for now */
-static struct nsc_ircc_cb *dev_self[] = { NULL, NULL, NULL, NULL };
+static struct nsc_ircc_cb *dev_self[] = { NULL, NULL, NULL, NULL, NULL };
static char *dongle_types[] = {
"Differential serial interface",
@@ -126,8 +141,24 @@ static char *dongle_types[] = {
"No dongle connected",
};
+/* PNP probing */
+static chipio_t pnp_info;
+static const struct pnp_device_id nsc_ircc_pnp_table[] = {
+ { .id = "NSC6001", .driver_data = 0 },
+ { .id = "IBM0071", .driver_data = 0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(pnp, nsc_ircc_pnp_table);
+
+static struct pnp_driver nsc_ircc_pnp_driver = {
+ .name = "nsc-ircc",
+ .id_table = nsc_ircc_pnp_table,
+ .probe = nsc_ircc_pnp_probe,
+};
+
/* Some prototypes */
-static int nsc_ircc_open(int i, chipio_t *info);
+static int nsc_ircc_open(chipio_t *info);
static int nsc_ircc_close(struct nsc_ircc_cb *self);
static int nsc_ircc_setup(chipio_t *info);
static void nsc_ircc_pio_receive(struct nsc_ircc_cb *self);
@@ -146,7 +177,10 @@ static int nsc_ircc_net_open(struct net_device *dev);
static int nsc_ircc_net_close(struct net_device *dev);
static int nsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
static struct net_device_stats *nsc_ircc_net_get_stats(struct net_device *dev);
-static int nsc_ircc_pmproc(struct pm_dev *dev, pm_request_t rqst, void *data);
+
+/* Globals */
+static int pnp_registered;
+static int pnp_succeeded;
/*
* Function nsc_ircc_init ()
@@ -158,28 +192,36 @@ static int __init nsc_ircc_init(void)
{
chipio_t info;
nsc_chip_t *chip;
- int ret = -ENODEV;
+ int ret;
int cfg_base;
int cfg, id;
int reg;
int i = 0;
+ ret = platform_driver_register(&nsc_ircc_driver);
+ if (ret) {
+ IRDA_ERROR("%s, Can't register driver!\n", driver_name);
+ return ret;
+ }
+
+ /* Register with PnP subsystem to detect disable ports */
+ ret = pnp_register_driver(&nsc_ircc_pnp_driver);
+
+ if (ret >= 0)
+ pnp_registered = 1;
+
+ ret = -ENODEV;
+
/* Probe for all the NSC chipsets we know about */
- for (chip=chips; chip->name ; chip++) {
+ for (chip = chips; chip->name ; chip++) {
IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __FUNCTION__,
chip->name);
/* Try all config registers for this chip */
- for (cfg=0; cfg<3; cfg++) {
+ for (cfg = 0; cfg < ARRAY_SIZE(chip->cfg); cfg++) {
cfg_base = chip->cfg[cfg];
if (!cfg_base)
continue;
-
- memset(&info, 0, sizeof(chipio_t));
- info.cfg_base = cfg_base;
- info.fir_base = io[i];
- info.dma = dma[i];
- info.irq = irq[i];
/* Read index register */
reg = inb(cfg_base);
@@ -194,24 +236,65 @@ static int __init nsc_ircc_init(void)
if ((id & chip->cid_mask) == chip->cid_value) {
IRDA_DEBUG(2, "%s() Found %s chip, revision=%d\n",
__FUNCTION__, chip->name, id & ~chip->cid_mask);
- /*
- * If the user supplies the base address, then
- * we init the chip, if not we probe the values
- * set by the BIOS
- */
- if (io[i] < 0x2000) {
- chip->init(chip, &info);
- } else
- chip->probe(chip, &info);
- if (nsc_ircc_open(i, &info) == 0)
- ret = 0;
+ /*
+ * If we found a correct PnP setting,
+ * we first try it.
+ */
+ if (pnp_succeeded) {
+ memset(&info, 0, sizeof(chipio_t));
+ info.cfg_base = cfg_base;
+ info.fir_base = pnp_info.fir_base;
+ info.dma = pnp_info.dma;
+ info.irq = pnp_info.irq;
+
+ if (info.fir_base < 0x2000) {
+ IRDA_MESSAGE("%s, chip->init\n", driver_name);
+ chip->init(chip, &info);
+ } else
+ chip->probe(chip, &info);
+
+ if (nsc_ircc_open(&info) >= 0)
+ ret = 0;
+ }
+
+ /*
+ * Opening based on PnP values failed.
+ * Let's fallback to user values, or probe
+ * the chip.
+ */
+ if (ret) {
+ IRDA_DEBUG(2, "%s, PnP init failed\n", driver_name);
+ memset(&info, 0, sizeof(chipio_t));
+ info.cfg_base = cfg_base;
+ info.fir_base = io[i];
+ info.dma = dma[i];
+ info.irq = irq[i];
+
+ /*
+ * If the user supplies the base address, then
+ * we init the chip, if not we probe the values
+ * set by the BIOS
+ */
+ if (io[i] < 0x2000) {
+ chip->init(chip, &info);
+ } else
+ chip->probe(chip, &info);
+
+ if (nsc_ircc_open(&info) >= 0)
+ ret = 0;
+ }
i++;
} else {
IRDA_DEBUG(2, "%s(), Wrong chip id=0x%02x\n", __FUNCTION__, id);
}
}
-
+ }
+
+ if (ret) {
+ platform_driver_unregister(&nsc_ircc_driver);
+ pnp_unregister_driver(&nsc_ircc_pnp_driver);
+ pnp_registered = 0;
}
return ret;
@@ -227,12 +310,17 @@ static void __exit nsc_ircc_cleanup(void)
{
int i;
- pm_unregister_all(nsc_ircc_pmproc);
-
- for (i=0; i < 4; i++) {
+ for (i = 0; i < ARRAY_SIZE(dev_self); i++) {
if (dev_self[i])
nsc_ircc_close(dev_self[i]);
}
+
+ platform_driver_unregister(&nsc_ircc_driver);
+
+ if (pnp_registered)
+ pnp_unregister_driver(&nsc_ircc_pnp_driver);
+
+ pnp_registered = 0;
}
/*
@@ -241,16 +329,26 @@ static void __exit nsc_ircc_cleanup(void)
* Open driver instance
*
*/
-static int __init nsc_ircc_open(int i, chipio_t *info)
+static int __init nsc_ircc_open(chipio_t *info)
{
struct net_device *dev;
struct nsc_ircc_cb *self;
- struct pm_dev *pmdev;
void *ret;
- int err;
+ int err, chip_index;
IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ for (chip_index = 0; chip_index < ARRAY_SIZE(dev_self); chip_index++) {
+ if (!dev_self[chip_index])
+ break;
+ }
+
+ if (chip_index == ARRAY_SIZE(dev_self)) {
+ IRDA_ERROR("%s(), maximum number of supported chips reached!\n", __FUNCTION__);
+ return -ENOMEM;
+ }
+
IRDA_MESSAGE("%s, Found chip at base=0x%03x\n", driver_name,
info->cfg_base);
@@ -271,8 +369,8 @@ static int __init nsc_ircc_open(int i, chipio_t *info)
spin_lock_init(&self->lock);
/* Need to store self somewhere */
- dev_self[i] = self;
- self->index = i;
+ dev_self[chip_index] = self;
+ self->index = chip_index;
/* Initialize IO */
self->io.cfg_base = info->cfg_base;
@@ -351,7 +449,7 @@ static int __init nsc_ircc_open(int i, chipio_t *info)
/* Check if user has supplied a valid dongle id or not */
if ((dongle_id <= 0) ||
- (dongle_id >= (sizeof(dongle_types) / sizeof(dongle_types[0]))) ) {
+ (dongle_id >= ARRAY_SIZE(dongle_types))) {
dongle_id = nsc_ircc_read_dongle_id(self->io.fir_base);
IRDA_MESSAGE("%s, Found dongle: %s\n", driver_name,
@@ -364,11 +462,18 @@ static int __init nsc_ircc_open(int i, chipio_t *info)
self->io.dongle_id = dongle_id;
nsc_ircc_init_dongle_interface(self->io.fir_base, dongle_id);
- pmdev = pm_register(PM_SYS_DEV, PM_SYS_IRDA, nsc_ircc_pmproc);
- if (pmdev)
- pmdev->data = self;
+ self->pldev = platform_device_register_simple(NSC_IRCC_DRIVER_NAME,
+ self->index, NULL, 0);
+ if (IS_ERR(self->pldev)) {
+ err = PTR_ERR(self->pldev);
+ goto out5;
+ }
+ platform_set_drvdata(self->pldev, self);
- return 0;
+ return chip_index;
+
+ out5:
+ unregister_netdev(dev);
out4:
dma_free_coherent(NULL, self->tx_buff.truesize,
self->tx_buff.head, self->tx_buff_dma);
@@ -379,7 +484,7 @@ static int __init nsc_ircc_open(int i, chipio_t *info)
release_region(self->io.fir_base, self->io.fir_ext);
out1:
free_netdev(dev);
- dev_self[i] = NULL;
+ dev_self[chip_index] = NULL;
return err;
}
@@ -399,6 +504,8 @@ static int __exit nsc_ircc_close(struct nsc_ircc_cb *self)
iobase = self->io.fir_base;
+ platform_device_unregister(self->pldev);
+
/* Remove netdevice */
unregister_netdev(self->netdev);
@@ -806,6 +913,43 @@ static int nsc_ircc_probe_39x(nsc_chip_t *chip, chipio_t *info)
return 0;
}
+/* PNP probing */
+static int nsc_ircc_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *id)
+{
+ memset(&pnp_info, 0, sizeof(chipio_t));
+ pnp_info.irq = -1;
+ pnp_info.dma = -1;
+ pnp_succeeded = 1;
+
+ /* There don't seem to be any way to get the cfg_base.
+ * On my box, cfg_base is in the PnP descriptor of the
+ * motherboard. Oh well... Jean II */
+
+ if (pnp_port_valid(dev, 0) &&
+ !(pnp_port_flags(dev, 0) & IORESOURCE_DISABLED))
+ pnp_info.fir_base = pnp_port_start(dev, 0);
+
+ if (pnp_irq_valid(dev, 0) &&
+ !(pnp_irq_flags(dev, 0) & IORESOURCE_DISABLED))
+ pnp_info.irq = pnp_irq(dev, 0);
+
+ if (pnp_dma_valid(dev, 0) &&
+ !(pnp_dma_flags(dev, 0) & IORESOURCE_DISABLED))
+ pnp_info.dma = pnp_dma(dev, 0);
+
+ IRDA_DEBUG(0, "%s() : From PnP, found firbase 0x%03X ; irq %d ; dma %d.\n",
+ __FUNCTION__, pnp_info.fir_base, pnp_info.irq, pnp_info.dma);
+
+ if((pnp_info.fir_base == 0) ||
+ (pnp_info.irq == -1) || (pnp_info.dma == -1)) {
+ /* Returning an error will disable the device. Yuck ! */
+ //return -EINVAL;
+ pnp_succeeded = 0;
+ }
+
+ return 0;
+}
+
/*
* Function nsc_ircc_setup (info)
*
@@ -2161,45 +2305,83 @@ static struct net_device_stats *nsc_ircc_net_get_stats(struct net_device *dev)
return &self->stats;
}
-static void nsc_ircc_suspend(struct nsc_ircc_cb *self)
+static int nsc_ircc_suspend(struct platform_device *dev, pm_message_t state)
{
- IRDA_MESSAGE("%s, Suspending\n", driver_name);
+ struct nsc_ircc_cb *self = platform_get_drvdata(dev);
+ int bank;
+ unsigned long flags;
+ int iobase = self->io.fir_base;
if (self->io.suspended)
- return;
+ return 0;
- nsc_ircc_net_close(self->netdev);
+ IRDA_DEBUG(1, "%s, Suspending\n", driver_name);
+ rtnl_lock();
+ if (netif_running(self->netdev)) {
+ netif_device_detach(self->netdev);
+ spin_lock_irqsave(&self->lock, flags);
+ /* Save current bank */
+ bank = inb(iobase+BSR);
+
+ /* Disable interrupts */
+ switch_bank(iobase, BANK0);
+ outb(0, iobase+IER);
+
+ /* Restore bank register */
+ outb(bank, iobase+BSR);
+
+ spin_unlock_irqrestore(&self->lock, flags);
+ free_irq(self->io.irq, self->netdev);
+ disable_dma(self->io.dma);
+ }
self->io.suspended = 1;
+ rtnl_unlock();
+
+ return 0;
}
-static void nsc_ircc_wakeup(struct nsc_ircc_cb *self)
+static int nsc_ircc_resume(struct platform_device *dev)
{
+ struct nsc_ircc_cb *self = platform_get_drvdata(dev);
+ unsigned long flags;
+
if (!self->io.suspended)
- return;
+ return 0;
+ IRDA_DEBUG(1, "%s, Waking up\n", driver_name);
+
+ rtnl_lock();
nsc_ircc_setup(&self->io);
- nsc_ircc_net_open(self->netdev);
-
- IRDA_MESSAGE("%s, Waking up\n", driver_name);
+ nsc_ircc_init_dongle_interface(self->io.fir_base, self->io.dongle_id);
+ if (netif_running(self->netdev)) {
+ if (request_irq(self->io.irq, nsc_ircc_interrupt, 0,
+ self->netdev->name, self->netdev)) {
+ IRDA_WARNING("%s, unable to allocate irq=%d\n",
+ driver_name, self->io.irq);
+
+ /*
+ * Don't fail resume process, just kill this
+ * network interface
+ */
+ unregister_netdevice(self->netdev);
+ } else {
+ spin_lock_irqsave(&self->lock, flags);
+ nsc_ircc_change_speed(self, self->io.speed);
+ spin_unlock_irqrestore(&self->lock, flags);
+ netif_device_attach(self->netdev);
+ }
+
+ } else {
+ spin_lock_irqsave(&self->lock, flags);
+ nsc_ircc_change_speed(self, 9600);
+ spin_unlock_irqrestore(&self->lock, flags);
+ }
self->io.suspended = 0;
-}
+ rtnl_unlock();
-static int nsc_ircc_pmproc(struct pm_dev *dev, pm_request_t rqst, void *data)
-{
- struct nsc_ircc_cb *self = (struct nsc_ircc_cb*) dev->data;
- if (self) {
- switch (rqst) {
- case PM_SUSPEND:
- nsc_ircc_suspend(self);
- break;
- case PM_RESUME:
- nsc_ircc_wakeup(self);
- break;
- }
- }
- return 0;
+ return 0;
}
MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
diff --git a/drivers/net/irda/nsc-ircc.h b/drivers/net/irda/nsc-ircc.h
index 6edf7e51462..dacf671abcd 100644
--- a/drivers/net/irda/nsc-ircc.h
+++ b/drivers/net/irda/nsc-ircc.h
@@ -269,7 +269,7 @@ struct nsc_ircc_cb {
__u32 new_speed;
int index; /* Instance index */
- struct pm_dev *dev;
+ struct platform_device *pldev;
};
static inline void switch_bank(int iobase, int bank)
diff --git a/drivers/net/irda/sir_dongle.c b/drivers/net/irda/sir_dongle.c
index 8d225921ae7..d7e32d9554f 100644
--- a/drivers/net/irda/sir_dongle.c
+++ b/drivers/net/irda/sir_dongle.c
@@ -16,6 +16,7 @@
#include <linux/init.h>
#include <linux/smp_lock.h>
#include <linux/kmod.h>
+#include <linux/mutex.h>
#include <net/irda/irda.h>
@@ -28,7 +29,7 @@
*/
static LIST_HEAD(dongle_list); /* list of registered dongle drivers */
-static DECLARE_MUTEX(dongle_list_lock); /* protects the list */
+static DEFINE_MUTEX(dongle_list_lock); /* protects the list */
int irda_register_dongle(struct dongle_driver *new)
{
@@ -38,25 +39,25 @@ int irda_register_dongle(struct dongle_driver *new)
IRDA_DEBUG(0, "%s : registering dongle \"%s\" (%d).\n",
__FUNCTION__, new->driver_name, new->type);
- down(&dongle_list_lock);
+ mutex_lock(&dongle_list_lock);
list_for_each(entry, &dongle_list) {
drv = list_entry(entry, struct dongle_driver, dongle_list);
if (new->type == drv->type) {
- up(&dongle_list_lock);
+ mutex_unlock(&dongle_list_lock);
return -EEXIST;
}
}
list_add(&new->dongle_list, &dongle_list);
- up(&dongle_list_lock);
+ mutex_unlock(&dongle_list_lock);
return 0;
}
EXPORT_SYMBOL(irda_register_dongle);
int irda_unregister_dongle(struct dongle_driver *drv)
{
- down(&dongle_list_lock);
+ mutex_lock(&dongle_list_lock);
list_del(&drv->dongle_list);
- up(&dongle_list_lock);
+ mutex_unlock(&dongle_list_lock);
return 0;
}
EXPORT_SYMBOL(irda_unregister_dongle);
@@ -75,7 +76,7 @@ int sirdev_get_dongle(struct sir_dev *dev, IRDA_DONGLE type)
return -EBUSY;
/* serialize access to the list of registered dongles */
- down(&dongle_list_lock);
+ mutex_lock(&dongle_list_lock);
list_for_each(entry, &dongle_list) {
drv = list_entry(entry, struct dongle_driver, dongle_list);
@@ -109,14 +110,14 @@ int sirdev_get_dongle(struct sir_dev *dev, IRDA_DONGLE type)
if (!drv->open || (err=drv->open(dev))!=0)
goto out_reject; /* failed to open driver */
- up(&dongle_list_lock);
+ mutex_unlock(&dongle_list_lock);
return 0;
out_reject:
dev->dongle_drv = NULL;
module_put(drv->owner);
out_unlock:
- up(&dongle_list_lock);
+ mutex_unlock(&dongle_list_lock);
return err;
}
diff --git a/drivers/net/irda/toim3232-sir.c b/drivers/net/irda/toim3232-sir.c
new file mode 100644
index 00000000000..aa1a9b0ed83
--- /dev/null
+++ b/drivers/net/irda/toim3232-sir.c
@@ -0,0 +1,375 @@
+/*********************************************************************
+ *
+ * Filename: toim3232-sir.c
+ * Version: 1.0
+ * Description: Implementation of dongles based on the Vishay/Temic
+ * TOIM3232 SIR Endec chipset. Currently only the
+ * IRWave IR320ST-2 is tested, although it should work
+ * with any TOIM3232 or TOIM4232 chipset based RS232
+ * dongle with minimal modification.
+ * Based heavily on the Tekram driver (tekram.c),
+ * with thanks to Dag Brattli and Martin Diehl.
+ * Status: Experimental.
+ * Author: David Basden <davidb-irda@rcpt.to>
+ * Created at: Thu Feb 09 23:47:32 2006
+ *
+ * Copyright (c) 2006 David Basden.
+ * Copyright (c) 1998-1999 Dag Brattli,
+ * Copyright (c) 2002 Martin Diehl,
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither Dag Brattli nor University of Tromsø admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+/*
+ * This driver has currently only been tested on the IRWave IR320ST-2
+ *
+ * PROTOCOL:
+ *
+ * The protocol for talking to the TOIM3232 is quite easy, and is
+ * designed to interface with RS232 with only level convertors. The
+ * BR/~D line on the chip is brought high to signal 'command mode',
+ * where a command byte is sent to select the baudrate of the RS232
+ * interface and the pulse length of the IRDA output. When BR/~D
+ * is brought low, the dongle then changes to the selected baudrate,
+ * and the RS232 interface is used for data until BR/~D is brought
+ * high again. The initial speed for the TOIMx323 after RESET is
+ * 9600 baud. The baudrate for command-mode is the last selected
+ * baud-rate, or 9600 after a RESET.
+ *
+ * The dongle I have (below) adds some extra hardware on the front end,
+ * but this is mostly directed towards pariasitic power from the RS232
+ * line rather than changing very much about how to communicate with
+ * the TOIM3232.
+ *
+ * The protocol to talk to the TOIM4232 chipset seems to be almost
+ * identical to the TOIM3232 (and the 4232 datasheet is more detailed)
+ * so this code will probably work on that as well, although I haven't
+ * tested it on that hardware.
+ *
+ * Target dongle variations that might be common:
+ *
+ * DTR and RTS function:
+ * The data sheet for the 4232 has a sample implementation that hooks the
+ * DTR and RTS lines to the RESET and BaudRate/~Data lines of the
+ * chip (through line-converters). Given both DTR and RTS would have to
+ * be held low in normal operation, and the TOIMx232 requires +5V to
+ * signal ground, most dongle designers would almost certainly choose
+ * an implementation that kept at least one of DTR or RTS high in
+ * normal operation to provide power to the dongle, but will likely
+ * vary between designs.
+ *
+ * User specified command bits:
+ * There are two user-controllable output lines from the TOIMx232 that
+ * can be set low or high by setting the appropriate bits in the
+ * high-nibble of the command byte (when setting speed and pulse length).
+ * These might be used to switch on and off added hardware or extra
+ * dongle features.
+ *
+ *
+ * Target hardware: IRWave IR320ST-2
+ *
+ * The IRWave IR320ST-2 is a simple dongle based on the Vishay/Temic
+ * TOIM3232 SIR Endec and the Vishay/Temic TFDS4500 SIR IRDA transciever.
+ * It uses a hex inverter and some discrete components to buffer and
+ * line convert the RS232 down to 5V.
+ *
+ * The dongle is powered through a voltage regulator, fed by a large
+ * capacitor. To switch the dongle on, DTR is brought high to charge
+ * the capacitor and drive the voltage regulator. DTR isn't associated
+ * with any control lines on the TOIM3232. Parisitic power is also taken
+ * from the RTS, TD and RD lines when brought high, but through resistors.
+ * When DTR is low, the circuit might lose power even with RTS high.
+ *
+ * RTS is inverted and attached to the BR/~D input pin. When RTS
+ * is high, BR/~D is low, and the TOIM3232 is in the normal 'data' mode.
+ * RTS is brought low, BR/~D is high, and the TOIM3232 is in 'command
+ * mode'.
+ *
+ * For some unknown reason, the RESET line isn't actually connected
+ * to anything. This means to reset the dongle to get it to a known
+ * state (9600 baud) you must drop DTR and RTS low, wait for the power
+ * capacitor to discharge, and then bring DTR (and RTS for data mode)
+ * high again, and wait for the capacitor to charge, the power supply
+ * to stabilise, and the oscillator clock to stabilise.
+ *
+ * Fortunately, if the current baudrate is known, the chipset can
+ * easily change speed by entering command mode without having to
+ * reset the dongle first.
+ *
+ * Major Components:
+ *
+ * - Vishay/Temic TOIM3232 SIR Endec to change RS232 pulse timings
+ * to IRDA pulse timings
+ * - 3.6864MHz crystal to drive TOIM3232 clock oscillator
+ * - DM74lS04M Inverting Hex line buffer for RS232 input buffering
+ * and level conversion
+ * - PJ2951AC 150mA voltage regulator
+ * - Vishay/Temic TFDS4500 SIR IRDA front-end transceiver
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+
+#include <net/irda/irda.h>
+
+#include "sir-dev.h"
+
+static int toim3232delay = 150; /* default is 150 ms */
+module_param(toim3232delay, int, 0);
+MODULE_PARM_DESC(toim3232delay, "toim3232 dongle write complete delay");
+
+#if 0
+static int toim3232flipdtr = 0; /* default is DTR high to reset */
+module_param(toim3232flipdtr, int, 0);
+MODULE_PARM_DESC(toim3232flipdtr, "toim3232 dongle invert DTR (Reset)");
+
+static int toim3232fliprts = 0; /* default is RTS high for baud change */
+module_param(toim3232fliptrs, int, 0);
+MODULE_PARM_DESC(toim3232fliprts, "toim3232 dongle invert RTS (BR/D)");
+#endif
+
+static int toim3232_open(struct sir_dev *);
+static int toim3232_close(struct sir_dev *);
+static int toim3232_change_speed(struct sir_dev *, unsigned);
+static int toim3232_reset(struct sir_dev *);
+
+#define TOIM3232_115200 0x00
+#define TOIM3232_57600 0x01
+#define TOIM3232_38400 0x02
+#define TOIM3232_19200 0x03
+#define TOIM3232_9600 0x06
+#define TOIM3232_2400 0x0A
+
+#define TOIM3232_PW 0x10 /* Pulse select bit */
+
+static struct dongle_driver toim3232 = {
+ .owner = THIS_MODULE,
+ .driver_name = "Vishay TOIM3232",
+ .type = IRDA_TOIM3232_DONGLE,
+ .open = toim3232_open,
+ .close = toim3232_close,
+ .reset = toim3232_reset,
+ .set_speed = toim3232_change_speed,
+};
+
+static int __init toim3232_sir_init(void)
+{
+ if (toim3232delay < 1 || toim3232delay > 500)
+ toim3232delay = 200;
+ IRDA_DEBUG(1, "%s - using %d ms delay\n",
+ toim3232.driver_name, toim3232delay);
+ return irda_register_dongle(&toim3232);
+}
+
+static void __exit toim3232_sir_cleanup(void)
+{
+ irda_unregister_dongle(&toim3232);
+}
+
+static int toim3232_open(struct sir_dev *dev)
+{
+ struct qos_info *qos = &dev->qos;
+
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ /* Pull the lines high to start with.
+ *
+ * For the IR320ST-2, we need to charge the main supply capacitor to
+ * switch the device on. We keep DTR high throughout to do this.
+ * When RTS, TD and RD are high, they will also trickle-charge the
+ * cap. RTS is high for data transmission, and low for baud rate select.
+ * -- DGB
+ */
+ sirdev_set_dtr_rts(dev, TRUE, TRUE);
+
+ /* The TOI3232 supports many speeds between 1200bps and 115000bps.
+ * We really only care about those supported by the IRDA spec, but
+ * 38400 seems to be implemented in many places */
+ qos->baud_rate.bits &= IR_2400|IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
+
+ /* From the tekram driver. Not sure what a reasonable value is -- DGB */
+ qos->min_turn_time.bits = 0x01; /* Needs at least 10 ms */
+ irda_qos_bits_to_value(qos);
+
+ /* irda thread waits 50 msec for power settling */
+
+ return 0;
+}
+
+static int toim3232_close(struct sir_dev *dev)
+{
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ /* Power off dongle */
+ sirdev_set_dtr_rts(dev, FALSE, FALSE);
+
+ return 0;
+}
+
+/*
+ * Function toim3232change_speed (dev, state, speed)
+ *
+ * Set the speed for the TOIM3232 based dongle. Warning, this
+ * function must be called with a process context!
+ *
+ * Algorithm
+ * 1. keep DTR high but clear RTS to bring into baud programming mode
+ * 2. wait at least 7us to enter programming mode
+ * 3. send control word to set baud rate and timing
+ * 4. wait at least 1us
+ * 5. bring RTS high to enter DATA mode (RS232 is passed through to transceiver)
+ * 6. should take effect immediately (although probably worth waiting)
+ */
+
+#define TOIM3232_STATE_WAIT_SPEED (SIRDEV_STATE_DONGLE_SPEED + 1)
+
+static int toim3232_change_speed(struct sir_dev *dev, unsigned speed)
+{
+ unsigned state = dev->fsm.substate;
+ unsigned delay = 0;
+ u8 byte;
+ static int ret = 0;
+
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ switch(state) {
+ case SIRDEV_STATE_DONGLE_SPEED:
+
+ /* Figure out what we are going to send as a control byte */
+ switch (speed) {
+ case 2400:
+ byte = TOIM3232_PW|TOIM3232_2400;
+ break;
+ default:
+ speed = 9600;
+ ret = -EINVAL;
+ /* fall thru */
+ case 9600:
+ byte = TOIM3232_PW|TOIM3232_9600;
+ break;
+ case 19200:
+ byte = TOIM3232_PW|TOIM3232_19200;
+ break;
+ case 38400:
+ byte = TOIM3232_PW|TOIM3232_38400;
+ break;
+ case 57600:
+ byte = TOIM3232_PW|TOIM3232_57600;
+ break;
+ case 115200:
+ byte = TOIM3232_115200;
+ break;
+ }
+
+ /* Set DTR, Clear RTS: Go into baud programming mode */
+ sirdev_set_dtr_rts(dev, TRUE, FALSE);
+
+ /* Wait at least 7us */
+ udelay(14);
+
+ /* Write control byte */
+ sirdev_raw_write(dev, &byte, 1);
+
+ dev->speed = speed;
+
+ state = TOIM3232_STATE_WAIT_SPEED;
+ delay = toim3232delay;
+ break;
+
+ case TOIM3232_STATE_WAIT_SPEED:
+ /* Have transmitted control byte * Wait for 'at least 1us' */
+ udelay(14);
+
+ /* Set DTR, Set RTS: Go into normal data mode */
+ sirdev_set_dtr_rts(dev, TRUE, TRUE);
+
+ /* Wait (TODO: check this is needed) */
+ udelay(50);
+ break;
+
+ default:
+ printk(KERN_ERR "%s - undefined state %d\n", __FUNCTION__, state);
+ ret = -EINVAL;
+ break;
+ }
+
+ dev->fsm.substate = state;
+ return (delay > 0) ? delay : ret;
+}
+
+/*
+ * Function toim3232reset (driver)
+ *
+ * This function resets the toim3232 dongle. Warning, this function
+ * must be called with a process context!!
+ *
+ * What we should do is:
+ * 0. Pull RESET high
+ * 1. Wait for at least 7us
+ * 2. Pull RESET low
+ * 3. Wait for at least 7us
+ * 4. Pull BR/~D high
+ * 5. Wait for at least 7us
+ * 6. Send control byte to set baud rate
+ * 7. Wait at least 1us after stop bit
+ * 8. Pull BR/~D low
+ * 9. Should then be in data mode
+ *
+ * Because the IR320ST-2 doesn't have the RESET line connected for some reason,
+ * we'll have to do something else.
+ *
+ * The default speed after a RESET is 9600, so lets try just bringing it up in
+ * data mode after switching it off, waiting for the supply capacitor to
+ * discharge, and then switch it back on. This isn't actually pulling RESET
+ * high, but it seems to have the same effect.
+ *
+ * This behaviour will probably work on dongles that have the RESET line connected,
+ * but if not, add a flag for the IR320ST-2, and implment the above-listed proper
+ * behaviour.
+ *
+ * RTS is inverted and then fed to BR/~D, so to put it in programming mode, we
+ * need to have pull RTS low
+ */
+
+static int toim3232_reset(struct sir_dev *dev)
+{
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ /* Switch off both DTR and RTS to switch off dongle */
+ sirdev_set_dtr_rts(dev, FALSE, FALSE);
+
+ /* Should sleep a while. This might be evil doing it this way.*/
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(msecs_to_jiffies(50));
+
+ /* Set DTR, Set RTS (data mode) */
+ sirdev_set_dtr_rts(dev, TRUE, TRUE);
+
+ /* Wait at least 10 ms for power to stabilize again */
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(msecs_to_jiffies(10));
+
+ /* Speed should now be 9600 */
+ dev->speed = 9600;
+
+ return 0;
+}
+
+MODULE_AUTHOR("David Basden <davidb-linux@rcpt.to>");
+MODULE_DESCRIPTION("Vishay/Temic TOIM3232 based dongle driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("irda-dongle-12"); /* IRDA_TOIM3232_DONGLE */
+
+module_init(toim3232_sir_init);
+module_exit(toim3232_sir_cleanup);
diff --git a/drivers/net/irda/vlsi_ir.c b/drivers/net/irda/vlsi_ir.c
index a9f49f058cf..97a49e0be76 100644
--- a/drivers/net/irda/vlsi_ir.c
+++ b/drivers/net/irda/vlsi_ir.c
@@ -1887,7 +1887,7 @@ static int __init vlsi_mod_init(void)
vlsi_proc_root->owner = THIS_MODULE;
}
- ret = pci_module_init(&vlsi_irda_driver);
+ ret = pci_register_driver(&vlsi_irda_driver);
if (ret && vlsi_proc_root)
remove_proc_entry(PROC_DIR, NULL);
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-01 18:48:43 +0000