diff options
Diffstat (limited to 'drivers/net/irda/Kconfig')
| -rw-r--r-- | drivers/net/irda/Kconfig | 404 |
1 files changed, 404 insertions, 0 deletions
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig new file mode 100644 index 00000000000..a464841da49 --- /dev/null +++ b/drivers/net/irda/Kconfig @@ -0,0 +1,404 @@ + +menu "Infrared-port device drivers" + depends on IRDA!=n + +comment "SIR device drivers" + +config IRTTY_SIR + tristate "IrTTY (uses Linux serial driver)" + depends on IRDA + help + Say Y here if you want to build support for the IrTTY line + discipline. To compile it as a module, choose M here: the module + will be called irtty-sir. IrTTY makes it possible to use Linux's + own serial driver for all IrDA ports that are 16550 compatible. + Most IrDA chips are 16550 compatible so you should probably say Y + to this option. Using IrTTY will however limit the speed of the + connection to 115200 bps (IrDA SIR mode). + + If unsure, say Y. + +comment "Dongle support" + +config DONGLE + bool "Serial dongle support" + depends on IRTTY_SIR + help + Say Y here if you have an infrared device that connects to your + computer's serial port. These devices are called dongles. Then say Y + or M to the driver for your particular dongle below. + + Note that the answer to this question won't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about serial dongles. + +config ESI_DONGLE + tristate "ESI JetEye PC dongle" + depends on DONGLE && IRDA + help + Say Y here if you want to build support for the Extended Systems + JetEye PC dongle. To compile it as a module, choose M here. The ESI + dongle attaches to the normal 9-pin serial port connector, and can + currently only be used by IrTTY. To activate support for ESI + dongles you will have to start irattach like this: + "irattach -d esi". + +config ACTISYS_DONGLE + tristate "ACTiSYS IR-220L and IR220L+ dongle" + depends on DONGLE && IRDA + help + Say Y here if you want to build support for the ACTiSYS IR-220L and + IR220L+ dongles. To compile it as a module, choose M here. The + ACTiSYS dongles attaches to the normal 9-pin serial port connector, + and can currently only be used by IrTTY. To activate support for + ACTiSYS dongles you will have to start irattach like this: + "irattach -d actisys" or "irattach -d actisys+". + +config TEKRAM_DONGLE + tristate "Tekram IrMate 210B dongle" + depends on DONGLE && IRDA + help + Say Y here if you want to build support for the Tekram IrMate 210B + dongle. To compile it as a module, choose M here. The Tekram dongle + attaches to the normal 9-pin serial port connector, and can + currently only be used by IrTTY. To activate support for Tekram + dongles you will have to start irattach like this: + "irattach -d tekram". + +config LITELINK_DONGLE + tristate "Parallax LiteLink dongle" + depends on DONGLE && IRDA + help + Say Y here if you want to build support for the Parallax Litelink + dongle. To compile it as a module, choose M here. The Parallax + dongle attaches to the normal 9-pin serial port connector, and can + currently only be used by IrTTY. To activate support for Parallax + dongles you will have to start irattach like this: + "irattach -d litelink". + +config MA600_DONGLE + tristate "Mobile Action MA600 dongle" + depends on DONGLE && IRDA && EXPERIMENTAL + help + Say Y here if you want to build support for the Mobile Action MA600 + dongle. To compile it as a module, choose M here. The MA600 dongle + attaches to the normal 9-pin serial port connector, and can + currently only be used by IrTTY. The driver should also support + the MA620 USB version of the dongle, if the integrated USB-to-RS232 + converter is supported by usbserial. To activate support for + MA600 dongle you will have to start irattach like this: + "irattach -d ma600". + +config GIRBIL_DONGLE + tristate "Greenwich GIrBIL dongle" + depends on DONGLE && IRDA && EXPERIMENTAL + help + Say Y here if you want to build support for the Greenwich GIrBIL + dongle. If you want to compile it as a module, choose M here. + The Greenwich dongle attaches to the normal 9-pin serial port + connector, and can currently only be used by IrTTY. To activate + support for Greenwich dongles you will have to start irattach + like this: "irattach -d girbil". + +config MCP2120_DONGLE + tristate "Microchip MCP2120" + depends on DONGLE && IRDA && EXPERIMENTAL + help + Say Y here if you want to build support for the Microchip MCP2120 + dongle. If you want to compile it as a module, choose M here. + The MCP2120 dongle attaches to the normal 9-pin serial port + connector, and can currently only be used by IrTTY. To activate + support for MCP2120 dongles you will have to start irattach + like this: "irattach -d mcp2120". + + You must build this dongle yourself. For more information see: + <http://www.eyetap.org/~tangf/irda_sir_linux.html> + +config OLD_BELKIN_DONGLE + tristate "Old Belkin dongle" + depends on DONGLE && IRDA && EXPERIMENTAL + help + Say Y here if you want to build support for the Adaptec Airport 1000 + and 2000 dongles. If you want to compile it as a module, choose + M here. Some information is contained in the comments + at the top of <file:drivers/net/irda/old_belkin.c>. + +config ACT200L_DONGLE + tristate "ACTiSYS IR-200L dongle" + depends on DONGLE && IRDA && EXPERIMENTAL + help + Say Y here if you want to build support for the ACTiSYS IR-200L + dongle. If you want to compile it as a module, choose M here. + The ACTiSYS IR-200L dongle attaches to the normal 9-pin serial + port connector, and can currently only be used by IrTTY. + To activate support for ACTiSYS IR-200L dongle you will have to + start irattach like this: "irattach -d act200l". + +comment "Old SIR device drivers" + +config IRPORT_SIR + tristate "IrPORT (IrDA serial driver)" + depends on IRDA && BROKEN_ON_SMP + ---help--- + Say Y here if you want to build support for the IrPORT IrDA device + driver. To compile it as a module, choose M here: the module will be + called irport. IrPORT can be used instead of IrTTY and sometimes + this can be better. One example is if your IrDA port does not + have echo-canceling, which will work OK with IrPORT since this + driver is working in half-duplex mode only. You don't need to use + irattach with IrPORT, but you just insert it the same way as FIR + drivers (insmod irport io=0x3e8 irq=11). Notice that IrPORT is a + SIR device driver which means that speed is limited to 115200 bps. + + If unsure, say Y. + +comment "Old Serial dongle support" + +config DONGLE_OLD + bool "Old Serial dongle support" + depends on (IRTTY_OLD || IRPORT_SIR) && BROKEN_ON_SMP + help + Say Y here if you have an infrared device that connects to your + computer's serial port. These devices are called dongles. Then say Y + or M to the driver for your particular dongle below. + + Note that the answer to this question won't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about serial dongles. + +config ESI_DONGLE_OLD + tristate "ESI JetEye PC dongle" + depends on DONGLE_OLD && IRDA + help + Say Y here if you want to build support for the Extended Systems + JetEye PC dongle. To compile it as a module, choose M here. The ESI + dongle attaches to the normal 9-pin serial port connector, and can + currently only be used by IrTTY. To activate support for ESI + dongles you will have to start irattach like this: + "irattach -d esi". + +config ACTISYS_DONGLE_OLD + tristate "ACTiSYS IR-220L and IR220L+ dongle" + depends on DONGLE_OLD && IRDA + help + Say Y here if you want to build support for the ACTiSYS IR-220L and + IR220L+ dongles. To compile it as a module, choose M here. The + ACTiSYS dongles attaches to the normal 9-pin serial port connector, + and can currently only be used by IrTTY. To activate support for + ACTiSYS dongles you will have to start irattach like this: + "irattach -d actisys" or "irattach -d actisys+". + +config TEKRAM_DONGLE_OLD + tristate "Tekram IrMate 210B dongle" + depends on DONGLE_OLD && IRDA + help + Say Y here if you want to build support for the Tekram IrMate 210B + dongle. To compile it as a module, choose M here. The Tekram dongle + attaches to the normal 9-pin serial port connector, and can + currently only be used by IrTTY. To activate support for Tekram + dongles you will have to start irattach like this: + "irattach -d tekram". + +config GIRBIL_DONGLE_OLD + tristate "Greenwich GIrBIL dongle" + depends on DONGLE_OLD && IRDA + help + Say Y here if you want to build support for the Greenwich GIrBIL + dongle. To compile it as a module, choose M here. The Greenwich + dongle attaches to the normal 9-pin serial port connector, and can + currently only be used by IrTTY. To activate support for Greenwich + dongles you will have to insert "irattach -d girbil" in the + /etc/irda/drivers script. + +config LITELINK_DONGLE_OLD + tristate "Parallax LiteLink dongle" + depends on DONGLE_OLD && IRDA + help + Say Y here if you want to build support for the Parallax Litelink + dongle. To compile it as a module, choose M here. The Parallax + dongle attaches to the normal 9-pin serial port connector, and can + currently only be used by IrTTY. To activate support for Parallax + dongles you will have to start irattach like this: + "irattach -d litelink". + +config MCP2120_DONGLE_OLD + tristate "Microchip MCP2120" + depends on DONGLE_OLD && IRDA + help + Say Y here if you want to build support for the Microchip MCP2120 + dongle. To compile it as a module, choose M here. The MCP2120 dongle + attaches to the normal 9-pin serial port connector, and can + currently only be used by IrTTY. To activate support for MCP2120 + dongles you will have to insert "irattach -d mcp2120" in the + /etc/irda/drivers script. + + You must build this dongle yourself. For more information see: + <http://www.eyetap.org/~tangf/irda_sir_linux.html> + +config OLD_BELKIN_DONGLE_OLD + tristate "Old Belkin dongle" + depends on DONGLE_OLD && IRDA + help + Say Y here if you want to build support for the Adaptec Airport 1000 + and 2000 dongles. To compile it as a module, choose M here: the module + will be called old_belkin. Some information is contained in the + comments at the top of <file:drivers/net/irda/old_belkin.c>. + +config ACT200L_DONGLE_OLD + tristate "ACTiSYS IR-200L dongle (EXPERIMENTAL)" + depends on DONGLE_OLD && EXPERIMENTAL && IRDA + help + Say Y here if you want to build support for the ACTiSYS IR-200L + dongle. To compile it as a module, choose M here. The ACTiSYS + IR-200L dongle attaches to the normal 9-pin serial port connector, + and can currently only be used by IrTTY. To activate support for + ACTiSYS IR-200L dongles you will have to start irattach like this: + "irattach -d act200l". + +config MA600_DONGLE_OLD + tristate "Mobile Action MA600 dongle (EXPERIMENTAL)" + depends on DONGLE_OLD && EXPERIMENTAL && IRDA + ---help--- + Say Y here if you want to build support for the Mobile Action MA600 + dongle. To compile it as a module, choose M here. The MA600 dongle + attaches to the normal 9-pin serial port connector, and can + currently only be tested on IrCOMM. To activate support for MA600 + dongles you will have to insert "irattach -d ma600" in the + /etc/irda/drivers script. Note: irutils 0.9.15 requires no + modification. irutils 0.9.9 needs modification. For more + information, download the following tar gzip file. + + There is a pre-compiled module on + <http://engsvr.ust.hk/~eetwl95/ma600.html> + +config EP7211_IR + tristate "EP7211 I/R support" + depends on DONGLE_OLD && ARCH_EP7211 && IRDA + +comment "FIR device drivers" + +config USB_IRDA + tristate "IrDA USB dongles" + depends on IRDA && USB + ---help--- + Say Y here if you want to build support for the USB IrDA FIR Dongle + device driver. To compile it as a module, choose M here: the module + will be called irda-usb. IrDA-USB support the various IrDA USB + dongles available and most of their pecularities. Those dongles + plug in the USB port of your computer, are plug and play, and + support SIR and FIR (4Mbps) speeds. On the other hand, those + dongles tend to be less efficient than a FIR chipset. + + Please note that the driver is still experimental. And of course, + you will need both USB and IrDA support in your kernel... + +config SIGMATEL_FIR + tristate "SigmaTel STIr4200 bridge (EXPERIMENTAL)" + depends on IRDA && USB && EXPERIMENTAL + select CRC32 + ---help--- + Say Y here if you want to build support for the SigmaTel STIr4200 + USB IrDA FIR bridge device driver. + + USB bridge based on the SigmaTel STIr4200 don't conform to the + IrDA-USB device class specification, and therefore need their + own specific driver. Those dongles support SIR and FIR (4Mbps) + speeds. + + To compile it as a module, choose M here: the module will be called + stir4200. + +config NSC_FIR + tristate "NSC PC87108/PC87338" + depends on IRDA && ISA + help + Say Y here if you want to build support for the NSC PC87108 and + PC87338 IrDA chipsets. This driver supports SIR, + MIR and FIR (4Mbps) speeds. + + To compile it as a module, choose M here: the module will be called + nsc-ircc. + +config WINBOND_FIR + tristate "Winbond W83977AF (IR)" + depends on IRDA && ISA + help + Say Y here if you want to build IrDA support for the Winbond + W83977AF super-io chipset. This driver should be used for the IrDA + chipset in the Corel NetWinder. The driver supports SIR, MIR and + FIR (4Mbps) speeds. + + To compile it as a module, choose M here: the module will be called + w83977af_ir. + +config TOSHIBA_FIR + tristate "Toshiba Type-O IR Port" + depends on IRDA && PCI && !64BIT + help + Say Y here if you want to build support for the Toshiba Type-O IR + and Donau oboe chipsets. These chipsets are used by the Toshiba + Libretto 100/110CT, Tecra 8100, Portege 7020 and many more laptops. + To compile it as a module, choose M here: the module will be called + donauboe. + +config AU1000_FIR + tristate "Alchemy Au1000 SIR/FIR" + depends on MIPS_AU1000 && IRDA + +config SMC_IRCC_FIR + tristate "SMSC IrCC (EXPERIMENTAL)" + depends on EXPERIMENTAL && IRDA && ISA + help + Say Y here if you want to build support for the SMC Infrared + Communications Controller. It is used in a wide variety of + laptops (Fujitsu, Sony, Compaq and some Toshiba). + To compile it as a module, choose M here: the module will be called + smsc-ircc2.o. + +config ALI_FIR + tristate "ALi M5123 FIR (EXPERIMENTAL)" + depends on EXPERIMENTAL && IRDA && ISA + help + Say Y here if you want to build support for the ALi M5123 FIR + Controller. The ALi M5123 FIR Controller is embedded in ALi M1543C, + M1535, M1535D, M1535+, M1535D Sourth Bridge. This driver supports + SIR, MIR and FIR (4Mbps) speeds. + + To compile it as a module, choose M here: the module will be called + ali-ircc. + +config VLSI_FIR + tristate "VLSI 82C147 SIR/MIR/FIR (EXPERIMENTAL)" + depends on EXPERIMENTAL && IRDA && PCI + help + Say Y here if you want to build support for the VLSI 82C147 + PCI-IrDA Controller. This controller is used by the HP OmniBook 800 + and 5500 notebooks. The driver provides support for SIR, MIR and + FIR (4Mbps) speeds. + + To compile it as a module, choose M here: the module will be called + vlsi_ir. + +config SA1100_FIR + tristate "SA1100 Internal IR" + depends on ARCH_SA1100 && IRDA + +config VIA_FIR + tristate "VIA VT8231/VT1211 SIR/MIR/FIR" + depends on IRDA && ISA && PCI + help + Say Y here if you want to build support for the VIA VT8231 + and VIA VT1211 IrDA controllers, found on the motherboards using + those those VIA chipsets. To use this controller, you will need + to plug a specific 5 pins FIR IrDA dongle in the specific + motherboard connector. The driver provides support for SIR, MIR + and FIR (4Mbps) speeds. + + You will need to specify the 'dongle_id' module parameter to + indicate the FIR dongle attached to the controller. + + To compile it as a module, choose M here: the module will be called + via-ircc. + +endmenu + |