diff options
Diffstat (limited to 'drivers/net/igb')
| -rw-r--r-- | drivers/net/igb/e1000_82575.c | 193 | ||||
| -rw-r--r-- | drivers/net/igb/e1000_82575.h | 6 | ||||
| -rw-r--r-- | drivers/net/igb/e1000_defines.h | 8 | ||||
| -rw-r--r-- | drivers/net/igb/e1000_hw.h | 18 | ||||
| -rw-r--r-- | drivers/net/igb/e1000_mac.c | 175 | ||||
| -rw-r--r-- | drivers/net/igb/e1000_mac.h | 3 | ||||
| -rw-r--r-- | drivers/net/igb/e1000_phy.c | 4 | ||||
| -rw-r--r-- | drivers/net/igb/e1000_regs.h | 1 | ||||
| -rw-r--r-- | drivers/net/igb/igb.h | 1 | ||||
| -rw-r--r-- | drivers/net/igb/igb_ethtool.c | 67 | ||||
| -rw-r--r-- | drivers/net/igb/igb_main.c | 267 |
11 files changed, 416 insertions, 327 deletions
diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c index ac28dd5a4fd..6158c0f3b20 100644 --- a/drivers/net/igb/e1000_82575.c +++ b/drivers/net/igb/e1000_82575.c @@ -53,7 +53,7 @@ static s32 igb_setup_fiber_serdes_link_82575(struct e1000_hw *); static s32 igb_write_phy_reg_sgmii_82575(struct e1000_hw *, u32, u16); static void igb_clear_hw_cntrs_82575(struct e1000_hw *); static s32 igb_acquire_swfw_sync_82575(struct e1000_hw *, u16); -static s32 igb_configure_pcs_link_82575(struct e1000_hw *); +static void igb_configure_pcs_link_82575(struct e1000_hw *); static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *, u16 *, u16 *); static s32 igb_get_phy_id_82575(struct e1000_hw *); @@ -61,6 +61,7 @@ static void igb_release_swfw_sync_82575(struct e1000_hw *, u16); static bool igb_sgmii_active_82575(struct e1000_hw *); static s32 igb_reset_init_script_82575(struct e1000_hw *); static s32 igb_read_mac_addr_82575(struct e1000_hw *); +static s32 igb_set_pcie_completion_timeout(struct e1000_hw *hw); static s32 igb_get_invariants_82575(struct e1000_hw *hw) { @@ -84,6 +85,7 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) case E1000_DEV_ID_82576_FIBER: case E1000_DEV_ID_82576_SERDES: case E1000_DEV_ID_82576_QUAD_COPPER: + case E1000_DEV_ID_82576_SERDES_QUAD: mac->type = e1000_82576; break; default: @@ -170,6 +172,10 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) size = 14; nvm->word_size = 1 << size; + /* if 82576 then initialize mailbox parameters */ + if (mac->type == e1000_82576) + igb_init_mbx_params_pf(hw); + /* setup PHY parameters */ if (phy->media_type != e1000_media_type_copper) { phy->type = e1000_phy_none; @@ -219,10 +225,6 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) return -E1000_ERR_PHY; } - /* if 82576 then initialize mailbox parameters */ - if (mac->type == e1000_82576) - igb_init_mbx_params_pf(hw); - return 0; } @@ -764,98 +766,6 @@ static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, u16 *speed, } /** - * igb_init_rx_addrs_82575 - Initialize receive address's - * @hw: pointer to the HW structure - * @rar_count: receive address registers - * - * Setups the receive address registers by setting the base receive address - * register to the devices MAC address and clearing all the other receive - * address registers to 0. - **/ -static void igb_init_rx_addrs_82575(struct e1000_hw *hw, u16 rar_count) -{ - u32 i; - u8 addr[6] = {0,0,0,0,0,0}; - /* - * This function is essentially the same as that of - * e1000_init_rx_addrs_generic. However it also takes care - * of the special case where the register offset of the - * second set of RARs begins elsewhere. This is implicitly taken care by - * function e1000_rar_set_generic. - */ - - hw_dbg("e1000_init_rx_addrs_82575"); - - /* Setup the receive address */ - hw_dbg("Programming MAC Address into RAR[0]\n"); - hw->mac.ops.rar_set(hw, hw->mac.addr, 0); - - /* Zero out the other (rar_entry_count - 1) receive addresses */ - hw_dbg("Clearing RAR[1-%u]\n", rar_count-1); - for (i = 1; i < rar_count; i++) - hw->mac.ops.rar_set(hw, addr, i); -} - -/** - * igb_update_mc_addr_list - Update Multicast addresses - * @hw: pointer to the HW structure - * @mc_addr_list: array of multicast addresses to program - * @mc_addr_count: number of multicast addresses to program - * @rar_used_count: the first RAR register free to program - * @rar_count: total number of supported Receive Address Registers - * - * Updates the Receive Address Registers and Multicast Table Array. - * The caller must have a packed mc_addr_list of multicast addresses. - * The parameter rar_count will usually be hw->mac.rar_entry_count - * unless there are workarounds that change this. - **/ -void igb_update_mc_addr_list(struct e1000_hw *hw, - u8 *mc_addr_list, u32 mc_addr_count, - u32 rar_used_count, u32 rar_count) -{ - u32 hash_value; - u32 i; - u8 addr[6] = {0,0,0,0,0,0}; - /* - * This function is essentially the same as that of - * igb_update_mc_addr_list_generic. However it also takes care - * of the special case where the register offset of the - * second set of RARs begins elsewhere. This is implicitly taken care by - * function e1000_rar_set_generic. - */ - - /* - * Load the first set of multicast addresses into the exact - * filters (RAR). If there are not enough to fill the RAR - * array, clear the filters. - */ - for (i = rar_used_count; i < rar_count; i++) { - if (mc_addr_count) { - igb_rar_set(hw, mc_addr_list, i); - mc_addr_count--; - mc_addr_list += ETH_ALEN; - } else { - igb_rar_set(hw, addr, i); - } - } - - /* Clear the old settings from the MTA */ - hw_dbg("Clearing MTA\n"); - for (i = 0; i < hw->mac.mta_reg_count; i++) { - array_wr32(E1000_MTA, i, 0); - wrfl(); - } - - /* Load any remaining multicast addresses into the hash table. */ - for (; mc_addr_count > 0; mc_addr_count--) { - hash_value = igb_hash_mc_addr(hw, mc_addr_list); - hw_dbg("Hash value = 0x%03X\n", hash_value); - igb_mta_set(hw, hash_value); - mc_addr_list += ETH_ALEN; - } -} - -/** * igb_shutdown_fiber_serdes_link_82575 - Remove link during power down * @hw: pointer to the HW structure * @@ -866,9 +776,7 @@ void igb_shutdown_fiber_serdes_link_82575(struct e1000_hw *hw) { u32 reg; - if (hw->mac.type != e1000_82576 || - (hw->phy.media_type != e1000_media_type_fiber && - hw->phy.media_type != e1000_media_type_internal_serdes)) + if (hw->phy.media_type != e1000_media_type_internal_serdes) return; /* if the management interface is not enabled, then power down */ @@ -911,6 +819,12 @@ static s32 igb_reset_hw_82575(struct e1000_hw *hw) if (ret_val) hw_dbg("PCI-E Master disable polling has failed.\n"); + /* set the completion timeout for interface */ + ret_val = igb_set_pcie_completion_timeout(hw); + if (ret_val) { + hw_dbg("PCI-E Set completion timeout has failed.\n"); + } + hw_dbg("Masking off all interrupts\n"); wr32(E1000_IMC, 0xffffffff); @@ -943,7 +857,8 @@ static s32 igb_reset_hw_82575(struct e1000_hw *hw) wr32(E1000_IMC, 0xffffffff); icr = rd32(E1000_ICR); - igb_check_alt_mac_addr(hw); + /* Install any alternate MAC address into RAR0 */ + ret_val = igb_check_alt_mac_addr(hw); return ret_val; } @@ -972,7 +887,8 @@ static s32 igb_init_hw_82575(struct e1000_hw *hw) igb_clear_vfta(hw); /* Setup the receive address */ - igb_init_rx_addrs_82575(hw, rar_count); + igb_init_rx_addrs(hw, rar_count); + /* Zero out the Multicast HASH table */ hw_dbg("Zeroing the MTA\n"); for (i = 0; i < mac->mta_reg_count; i++) @@ -1002,7 +918,7 @@ static s32 igb_init_hw_82575(struct e1000_hw *hw) **/ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw) { - u32 ctrl, led_ctrl; + u32 ctrl; s32 ret_val; bool link; @@ -1017,11 +933,6 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw) break; case e1000_phy_igp_3: ret_val = igb_copper_link_setup_igp(hw); - /* Setup activity LED */ - led_ctrl = rd32(E1000_LEDCTL); - led_ctrl &= IGP_ACTIVITY_LED_MASK; - led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE); - wr32(E1000_LEDCTL, led_ctrl); break; default: ret_val = -E1000_ERR_PHY; @@ -1052,9 +963,7 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw) } } - ret_val = igb_configure_pcs_link_82575(hw); - if (ret_val) - goto out; + igb_configure_pcs_link_82575(hw); /* * Check link status. Wait up to 100 microseconds for link to become @@ -1163,14 +1072,14 @@ static s32 igb_setup_fiber_serdes_link_82575(struct e1000_hw *hw) * independent interface (sgmii) is being used. Configures the link * for auto-negotiation or forces speed/duplex. **/ -static s32 igb_configure_pcs_link_82575(struct e1000_hw *hw) +static void igb_configure_pcs_link_82575(struct e1000_hw *hw) { struct e1000_mac_info *mac = &hw->mac; u32 reg = 0; if (hw->phy.media_type != e1000_media_type_copper || !(igb_sgmii_active_82575(hw))) - goto out; + return; /* For SGMII, we need to issue a PCS autoneg restart */ reg = rd32(E1000_PCS_LCTL); @@ -1213,9 +1122,6 @@ static s32 igb_configure_pcs_link_82575(struct e1000_hw *hw) reg); } wr32(E1000_PCS_LCTL, reg); - -out: - return 0; } /** @@ -1229,10 +1135,6 @@ out: static bool igb_sgmii_active_82575(struct e1000_hw *hw) { struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575; - - if (hw->mac.type != e1000_82575 && hw->mac.type != e1000_82576) - return false; - return dev_spec->sgmii_active; } @@ -1424,6 +1326,57 @@ void igb_rx_fifo_flush_82575(struct e1000_hw *hw) } /** + * igb_set_pcie_completion_timeout - set pci-e completion timeout + * @hw: pointer to the HW structure + * + * The defaults for 82575 and 82576 should be in the range of 50us to 50ms, + * however the hardware default for these parts is 500us to 1ms which is less + * than the 10ms recommended by the pci-e spec. To address this we need to + * increase the value to either 10ms to 200ms for capability version 1 config, + * or 16ms to 55ms for version 2. + **/ +static s32 igb_set_pcie_completion_timeout(struct e1000_hw *hw) +{ + u32 gcr = rd32(E1000_GCR); + s32 ret_val = 0; + u16 pcie_devctl2; + + /* only take action if timeout value is defaulted to 0 */ + if (gcr & E1000_GCR_CMPL_TMOUT_MASK) + goto out; + + /* + * if capababilities version is type 1 we can write the + * timeout of 10ms to 200ms through the GCR register + */ + if (!(gcr & E1000_GCR_CAP_VER2)) { + gcr |= E1000_GCR_CMPL_TMOUT_10ms; + goto out; + } + + /* + * for version 2 capabilities we need to write the config space + * directly in order to set the completion timeout value for + * 16ms to 55ms + */ + ret_val = igb_read_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2, + &pcie_devctl2); + if (ret_val) + goto out; + + pcie_devctl2 |= PCIE_DEVICE_CONTROL2_16ms; + + ret_val = igb_write_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2, + &pcie_devctl2); +out: + /* disable completion timeout resend */ + gcr &= ~E1000_GCR_CMPL_TMOUT_RESEND; + + wr32(E1000_GCR, gcr); + return ret_val; +} + +/** * igb_vmdq_set_loopback_pf - enable or disable vmdq loopback * @hw: pointer to the hardware struct * @enable: state to enter, either enabled or disabled diff --git a/drivers/net/igb/e1000_82575.h b/drivers/net/igb/e1000_82575.h index 0f16abab256..8a1e6597061 100644 --- a/drivers/net/igb/e1000_82575.h +++ b/drivers/net/igb/e1000_82575.h @@ -28,10 +28,14 @@ #ifndef _E1000_82575_H_ #define _E1000_82575_H_ -void igb_update_mc_addr_list(struct e1000_hw*, u8*, u32, u32, u32); extern void igb_shutdown_fiber_serdes_link_82575(struct e1000_hw *hw); extern void igb_rx_fifo_flush_82575(struct e1000_hw *hw); +#define ID_LED_DEFAULT_82575_SERDES ((ID_LED_DEF1_DEF2 << 12) | \ + (ID_LED_DEF1_DEF2 << 8) | \ + (ID_LED_DEF1_DEF2 << 4) | \ + (ID_LED_OFF1_ON2)) + #define E1000_RAR_ENTRIES_82575 16 #define E1000_RAR_ENTRIES_82576 24 diff --git a/drivers/net/igb/e1000_defines.h b/drivers/net/igb/e1000_defines.h index 3bda3db73f1..c85829355d5 100644 --- a/drivers/net/igb/e1000_defines.h +++ b/drivers/net/igb/e1000_defines.h @@ -435,6 +435,12 @@ /* Flow Control */ #define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */ +/* PCI Express Control */ +#define E1000_GCR_CMPL_TMOUT_MASK 0x0000F000 +#define E1000_GCR_CMPL_TMOUT_10ms 0x00001000 +#define E1000_GCR_CMPL_TMOUT_RESEND 0x00010000 +#define E1000_GCR_CAP_VER2 0x00040000 + /* PHY Control Register */ #define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ #define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ @@ -569,9 +575,11 @@ /* PCI/PCI-X/PCI-EX Config space */ #define PCIE_LINK_STATUS 0x12 +#define PCIE_DEVICE_CONTROL2 0x28 #define PCIE_LINK_WIDTH_MASK 0x3F0 #define PCIE_LINK_WIDTH_SHIFT 4 +#define PCIE_DEVICE_CONTROL2_16ms 0x0005 #define PHY_REVISION_MASK 0xFFFFFFF0 #define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */ diff --git a/drivers/net/igb/e1000_hw.h b/drivers/net/igb/e1000_hw.h index 68aac20c31c..119869b1124 100644 --- a/drivers/net/igb/e1000_hw.h +++ b/drivers/net/igb/e1000_hw.h @@ -42,6 +42,7 @@ struct e1000_hw; #define E1000_DEV_ID_82576_SERDES 0x10E7 #define E1000_DEV_ID_82576_QUAD_COPPER 0x10E8 #define E1000_DEV_ID_82576_NS 0x150A +#define E1000_DEV_ID_82576_SERDES_QUAD 0x150D #define E1000_DEV_ID_82575EB_COPPER 0x10A7 #define E1000_DEV_ID_82575EB_FIBER_SERDES 0x10A9 #define E1000_DEV_ID_82575GB_QUAD_COPPER 0x10D6 @@ -61,8 +62,7 @@ enum e1000_mac_type { enum e1000_media_type { e1000_media_type_unknown = 0, e1000_media_type_copper = 1, - e1000_media_type_fiber = 2, - e1000_media_type_internal_serdes = 3, + e1000_media_type_internal_serdes = 2, e1000_num_media_types }; @@ -137,7 +137,7 @@ enum e1000_rev_polarity { e1000_rev_polarity_undefined = 0xFF }; -enum e1000_fc_type { +enum e1000_fc_mode { e1000_fc_none = 0, e1000_fc_rx_pause, e1000_fc_tx_pause, @@ -339,6 +339,10 @@ struct e1000_mac_info { u16 ifs_ratio; u16 ifs_step_size; u16 mta_reg_count; + + /* Maximum size of the MTA register table in all supported adapters */ + #define MAX_MTA_REG 128 + u32 mta_shadow[MAX_MTA_REG]; u16 rar_entry_count; u8 forced_speed_duplex; @@ -425,8 +429,8 @@ struct e1000_fc_info { u16 pause_time; /* Flow control pause timer */ bool send_xon; /* Flow control send XON */ bool strict_ieee; /* Strict IEEE mode */ - enum e1000_fc_type type; /* Type of flow control */ - enum e1000_fc_type original_type; + enum e1000_fc_mode current_mode; /* Type of flow control */ + enum e1000_fc_mode requested_mode; }; struct e1000_mbx_operations { @@ -495,5 +499,7 @@ extern char *igb_get_hw_dev_name(struct e1000_hw *hw); #else #define hw_dbg(format, arg...) #endif - #endif +/* These functions must be implemented by drivers */ +s32 igb_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value); +s32 igb_write_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value); diff --git a/drivers/net/igb/e1000_mac.c b/drivers/net/igb/e1000_mac.c index 472f3f12484..a0231cd079f 100644 --- a/drivers/net/igb/e1000_mac.c +++ b/drivers/net/igb/e1000_mac.c @@ -37,20 +37,6 @@ static s32 igb_set_default_fc(struct e1000_hw *hw); static s32 igb_set_fc_watermarks(struct e1000_hw *hw); -static s32 igb_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value) -{ - struct igb_adapter *adapter = hw->back; - u16 cap_offset; - - cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP); - if (!cap_offset) - return -E1000_ERR_CONFIG; - - pci_read_config_word(adapter->pdev, cap_offset + reg, value); - - return 0; -} - /** * igb_get_bus_info_pcie - Get PCIe bus information * @hw: pointer to the HW structure @@ -118,6 +104,31 @@ static void igb_write_vfta(struct e1000_hw *hw, u32 offset, u32 value) } /** + * igb_init_rx_addrs - Initialize receive address's + * @hw: pointer to the HW structure + * @rar_count: receive address registers + * + * Setups the receive address registers by setting the base receive address + * register to the devices MAC address and clearing all the other receive + * address registers to 0. + **/ +void igb_init_rx_addrs(struct e1000_hw *hw, u16 rar_count) +{ + u32 i; + u8 mac_addr[ETH_ALEN] = {0}; + + /* Setup the receive address */ + hw_dbg("Programming MAC Address into RAR[0]\n"); + + hw->mac.ops.rar_set(hw, hw->mac.addr, 0); + + /* Zero out the other (rar_entry_count - 1) receive addresses */ + hw_dbg("Clearing RAR[1-%u]\n", rar_count-1); + for (i = 1; i < rar_count; i++) + hw->mac.ops.rar_set(hw, mac_addr, i); +} + +/** * igb_vfta_set - enable or disable vlan in VLAN filter table * @hw: pointer to the HW structure * @vid: VLAN id to add or remove @@ -275,6 +286,41 @@ void igb_mta_set(struct e1000_hw *hw, u32 hash_value) } /** + * igb_update_mc_addr_list - Update Multicast addresses + * @hw: pointer to the HW structure + * @mc_addr_list: array of multicast addresses to program + * @mc_addr_count: number of multicast addresses to program + * + * Updates entire Multicast Table Array. + * The caller must have a packed mc_addr_list of multicast addresses. + **/ +void igb_update_mc_addr_list(struct e1000_hw *hw, + u8 *mc_addr_list, u32 mc_addr_count) +{ + u32 hash_value, hash_bit, hash_reg; + int i; + + /* clear mta_shadow */ + memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow)); + + /* update mta_shadow from mc_addr_list */ + for (i = 0; (u32) i < mc_addr_count; i++) { + hash_value = igb_hash_mc_addr(hw, mc_addr_list); + + hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1); + hash_bit = hash_value & 0x1F; + + hw->mac.mta_shadow[hash_reg] |= (1 << hash_bit); + mc_addr_list += (ETH_ALEN); + } + + /* replace the entire MTA table */ + for (i = hw->mac.mta_reg_count - 1; i >= 0; i--) + array_wr32(E1000_MTA, i, hw->mac.mta_shadow[i]); + wrfl(); +} + +/** * igb_hash_mc_addr - Generate a multicast hash value * @hw: pointer to the HW structure * @mc_addr: pointer to a multicast address @@ -490,18 +536,24 @@ s32 igb_setup_link(struct e1000_hw *hw) if (igb_check_reset_block(hw)) goto out; - ret_val = igb_set_default_fc(hw); - if (ret_val) - goto out; + /* + * If requested flow control is set to default, set flow control + * based on the EEPROM flow control settings. + */ + if (hw->fc.requested_mode == e1000_fc_default) { + ret_val = igb_set_default_fc(hw); + if (ret_val) + goto out; + } /* * We want to save off the original Flow Control configuration just * in case we get disconnected and then reconnected into a different * hub or switch with different Flow Control capabilities. */ - hw->fc.original_type = hw->fc.type; + hw->fc.current_mode = hw->fc.requested_mode; - hw_dbg("After fix-ups FlowControl is now = %x\n", hw->fc.type); + hw_dbg("After fix-ups FlowControl is now = %x\n", hw->fc.current_mode); /* Call the necessary media_type subroutine to configure the link. */ ret_val = hw->mac.ops.setup_physical_interface(hw); @@ -568,7 +620,7 @@ static s32 igb_set_fc_watermarks(struct e1000_hw *hw) * ability to transmit pause frames is not enabled, then these * registers will be set to 0. */ - if (hw->fc.type & e1000_fc_tx_pause) { + if (hw->fc.current_mode & e1000_fc_tx_pause) { /* * We need to set up the Receive Threshold high and low water * marks as well as (optionally) enabling the transmission of @@ -615,12 +667,12 @@ static s32 igb_set_default_fc(struct e1000_hw *hw) } if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == 0) - hw->fc.type = e1000_fc_none; + hw->fc.requested_mode = e1000_fc_none; else if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == NVM_WORD0F_ASM_DIR) - hw->fc.type = e1000_fc_tx_pause; + hw->fc.requested_mode = e1000_fc_tx_pause; else - hw->fc.type = e1000_fc_full; + hw->fc.requested_mode = e1000_fc_full; out: return ret_val; @@ -650,7 +702,7 @@ s32 igb_force_mac_fc(struct e1000_hw *hw) * receive flow control. * * The "Case" statement below enables/disable flow control - * according to the "hw->fc.type" parameter. + * according to the "hw->fc.current_mode" parameter. * * The possible values of the "fc" parameter are: * 0: Flow control is completely disabled @@ -661,9 +713,9 @@ s32 igb_force_mac_fc(struct e1000_hw *hw) * 3: Both Rx and TX flow control (symmetric) is enabled. * other: No other values should be possible at this point. */ - hw_dbg("hw->fc.type = %u\n", hw->fc.type); + hw_dbg("hw->fc.current_mode = %u\n", hw->fc.current_mode); - switch (hw->fc.type) { + switch (hw->fc.current_mode) { case e1000_fc_none: ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE)); break; @@ -713,8 +765,7 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) * configuration of the MAC to match the "fc" parameter. */ if (mac->autoneg_failed) { - if (hw->phy.media_type == e1000_media_type_fiber || - hw->phy.media_type == e1000_media_type_internal_serdes) + if (hw->phy.media_type == e1000_media_type_internal_serdes) ret_val = igb_force_mac_fc(hw); } else { if (hw->phy.media_type == e1000_media_type_copper) @@ -812,11 +863,11 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) * ONLY. Hence, we must now check to see if we need to * turn OFF the TRANSMISSION of PAUSE frames. */ - if (hw->fc.original_type == e1000_fc_full) { - hw->fc.type = e1000_fc_full; + if (hw->fc.requested_mode == e1000_fc_full) { + hw->fc.current_mode = e1000_fc_full; hw_dbg("Flow Control = FULL.\r\n"); } else { - hw->fc.type = e1000_fc_rx_pause; + hw->fc.current_mode = e1000_fc_rx_pause; hw_dbg("Flow Control = " "RX PAUSE frames only.\r\n"); } @@ -833,7 +884,7 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { - hw->fc.type = e1000_fc_tx_pause; + hw->fc.current_mode = e1000_fc_tx_pause; hw_dbg("Flow Control = TX PAUSE frames only.\r\n"); } /* @@ -848,7 +899,7 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { - hw->fc.type = e1000_fc_rx_pause; + hw->fc.current_mode = e1000_fc_rx_pause; hw_dbg("Flow Control = RX PAUSE frames only.\r\n"); } /* @@ -872,13 +923,13 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) * be asked to delay transmission of packets than asking * our link partner to pause transmission of frames. */ - else if ((hw->fc.original_type == e1000_fc_none || - hw->fc.original_type == e1000_fc_tx_pause) || + else if ((hw->fc.requested_mode == e1000_fc_none || + hw->fc.requested_mode == e1000_fc_tx_pause) || hw->fc.strict_ieee) { - hw->fc.type = e1000_fc_none; + hw->fc.current_mode = e1000_fc_none; hw_dbg("Flow Control = NONE.\r\n"); } else { - hw->fc.type = e1000_fc_rx_pause; + hw->fc.current_mode = e1000_fc_rx_pause; hw_dbg("Flow Control = RX PAUSE frames only.\r\n"); } @@ -894,7 +945,7 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) } if (duplex == HALF_DUPLEX) - hw->fc.type = e1000_fc_none; + hw->fc.current_mode = e1000_fc_none; /* * Now we call a subroutine to actually force the MAC @@ -1065,9 +1116,17 @@ static s32 igb_valid_led_default(struct e1000_hw *hw, u16 *data) goto out; } - if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) - *data = ID_LED_DEFAULT; - + if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) { + switch(hw->phy.media_type) { + case e1000_media_type_internal_serdes: + *data = ID_LED_DEFAULT_82575_SERDES; + break; + case e1000_media_type_copper: + default: + *data = ID_LED_DEFAULT; + break; + } + } out: return ret_val; } @@ -1161,22 +1220,16 @@ s32 igb_blink_led(struct e1000_hw *hw) u32 ledctl_blink = 0; u32 i; - if (hw->phy.media_type == e1000_media_type_fiber) { - /* always blink LED0 for PCI-E fiber */ - ledctl_blink = E1000_LEDCTL_LED0_BLINK | - (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT); - } else { - /* - * set the blink bit for each LED that's "on" (0x0E) - * in ledctl_mode2 - */ - ledctl_blink = hw->mac.ledctl_mode2; - for (i = 0; i < 4; i++) - if (((hw->mac.ledctl_mode2 >> (i * 8)) & 0xFF) == - E1000_LEDCTL_MODE_LED_ON) - ledctl_blink |= (E1000_LEDCTL_LED0_BLINK << - (i * 8)); - } + /* + * set the blink bit for each LED that's "on" (0x0E) + * in ledctl_mode2 + */ + ledctl_blink = hw->mac.ledctl_mode2; + for (i = 0; i < 4; i++) + if (((hw->mac.ledctl_mode2 >> (i * 8)) & 0xFF) == + E1000_LEDCTL_MODE_LED_ON) + ledctl_blink |= (E1000_LEDCTL_LED0_BLINK << + (i * 8)); wr32(E1000_LEDCTL, ledctl_blink); @@ -1191,15 +1244,7 @@ s32 igb_blink_led(struct e1000_hw *hw) **/ s32 igb_led_off(struct e1000_hw *hw) { - u32 ctrl; - switch (hw->phy.media_type) { - case e1000_media_type_fiber: - ctrl = rd32(E1000_CTRL); - ctrl |= E1000_CTRL_SWDPIN0; - ctrl |= E1000_CTRL_SWDPIO0; - wr32(E1000_CTRL, ctrl); - break; case e1000_media_type_copper: wr32(E1000_LEDCTL, hw->mac.ledctl_mode1); break; diff --git a/drivers/net/igb/e1000_mac.h b/drivers/net/igb/e1000_mac.h index 1d690b4c9ae..7518af8cbbf 100644 --- a/drivers/net/igb/e1000_mac.h +++ b/drivers/net/igb/e1000_mac.h @@ -51,6 +51,8 @@ s32 igb_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *duplex); s32 igb_id_led_init(struct e1000_hw *hw); s32 igb_led_off(struct e1000_hw *hw); +void igb_update_mc_addr_list(struct e1000_hw *hw, + u8 *mc_addr_list, u32 mc_addr_count); s32 igb_setup_link(struct e1000_hw *hw); s32 igb_validate_mdi_setting(struct e1000_hw *hw); s32 igb_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg, @@ -60,6 +62,7 @@ void igb_clear_hw_cntrs_base(struct e1000_hw *hw); void igb_clear_vfta(struct e1000_hw *hw); s32 igb_vfta_set(struct e1000_hw *hw, u32 vid, bool add); void igb_config_collision_dist(struct e1000_hw *hw); +void igb_init_rx_addrs(struct e1000_hw *hw, u16 rar_count); void igb_mta_set(struct e1000_hw *hw, u32 hash_value); void igb_put_hw_semaphore(struct e1000_hw *hw); void igb_rar_set(struct e1000_hw *hw, u8 *addr, u32 index); diff --git a/drivers/net/igb/e1000_phy.c b/drivers/net/igb/e1000_phy.c index f50fac25be4..c1f4da63042 100644 --- a/drivers/net/igb/e1000_phy.c +++ b/drivers/net/igb/e1000_phy.c @@ -735,7 +735,7 @@ static s32 igb_phy_setup_autoneg(struct e1000_hw *hw) * other: No software override. The flow control configuration * in the EEPROM is used. */ - switch (hw->fc.type) { + switch (hw->fc.current_mode) { case e1000_fc_none: /* * Flow control (RX & TX) is completely disabled by a @@ -992,7 +992,7 @@ static void igb_phy_force_speed_duplex_setup(struct e1000_hw *hw, u32 ctrl; /* Turn off flow control when forcing speed/duplex */ - hw->fc.type = e1000_fc_none; + hw->fc.current_mode = e1000_fc_none; /* Force speed/duplex on the mac */ ctrl = rd32(E1000_CTRL); diff --git a/drivers/net/igb/e1000_regs.h b/drivers/net/igb/e1000_regs.h index 6e5924511e4..345d1442d6d 100644 --- a/drivers/net/igb/e1000_regs.h +++ b/drivers/net/igb/e1000_regs.h @@ -305,6 +305,7 @@ enum { #define E1000_CCMCTL 0x05B48 /* CCM Control Register */ #define E1000_GIOCTL 0x05B44 /* GIO Analog Control Register */ #define E1000_SCCTL 0x05B4C /* PCIc PLL Configuration Register */ +#define E1000_GCR 0x05B00 /* PCI-Ex Control */ #define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */ #define E1000_SWSM 0x05B50 /* SW Semaphore */ #define E1000_FWSM 0x05B54 /* FW Semaphore */ diff --git a/drivers/net/igb/igb.h b/drivers/net/igb/igb.h index b2c98dea9ee..7126fea26fe 100644 --- a/drivers/net/igb/igb.h +++ b/drivers/net/igb/igb.h @@ -70,6 +70,7 @@ struct vf_data_storage { unsigned char vf_mac_addresses[ETH_ALEN]; u16 vf_mc_hashes[IGB_MAX_VF_MC_ENTRIES]; u16 num_vf_mc_hashes; + u16 vlans_enabled; bool clear_to_send; }; diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c index 9598ac09f4b..d004c359244 100644 --- a/drivers/net/igb/igb_ethtool.c +++ b/drivers/net/igb/igb_ethtool.c @@ -168,8 +168,7 @@ static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) ecmd->duplex = -1; } - ecmd->autoneg = ((hw->phy.media_type == e1000_media_type_fiber) || - hw->mac.autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE; + ecmd->autoneg = hw->mac.autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE; return 0; } @@ -191,23 +190,20 @@ static int igb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) if (ecmd->autoneg == AUTONEG_ENABLE) { hw->mac.autoneg = 1; - if (hw->phy.media_type == e1000_media_type_fiber) - hw->phy.autoneg_advertised = ADVERTISED_1000baseT_Full | - ADVERTISED_FIBRE | - ADVERTISED_Autoneg; - else - hw->phy.autoneg_advertised = ecmd->advertising | - ADVERTISED_TP | - ADVERTISED_Autoneg; + hw->phy.autoneg_advertised = ecmd->advertising | + ADVERTISED_TP | + ADVERTISED_Autoneg; ecmd->advertising = hw->phy.autoneg_advertised; - } else + if (adapter->fc_autoneg) + hw->fc.requested_mode = e1000_fc_default; + } else { if (igb_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) { clear_bit(__IGB_RESETTING, &adapter->state); return -EINVAL; } + } /* reset the link */ - if (netif_running(adapter->netdev)) { igb_down(adapter); igb_up(adapter); @@ -227,11 +223,11 @@ static void igb_get_pauseparam(struct net_device *netdev, pause->autoneg = (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE); - if (hw->fc.type == e1000_fc_rx_pause) + if (hw->fc.current_mode == e1000_fc_rx_pause) pause->rx_pause = 1; - else if (hw->fc.type == e1000_fc_tx_pause) + else if (hw->fc.current_mode == e1000_fc_tx_pause) pause->tx_pause = 1; - else if (hw->fc.type == e1000_fc_full) { + else if (hw->fc.current_mode == e1000_fc_full) { pause->rx_pause = 1; pause->tx_pause = 1; } @@ -249,26 +245,28 @@ static int igb_set_pauseparam(struct net_device *netdev, while (test_and_set_bit(__IGB_RESETTING, &adapter->state)) msleep(1); - if (pause->rx_pause && pause->tx_pause) - hw->fc.type = e1000_fc_full; - else if (pause->rx_pause && !pause->tx_pause) - hw->fc.type = e1000_fc_rx_pause; - else if (!pause->rx_pause && pause->tx_pause) - hw->fc.type = e1000_fc_tx_pause; - else if (!pause->rx_pause && !pause->tx_pause) - hw->fc.type = e1000_fc_none; - - hw->fc.original_type = hw->fc.type; - if (adapter->fc_autoneg == AUTONEG_ENABLE) { + hw->fc.requested_mode = e1000_fc_default; if (netif_running(adapter->netdev)) { igb_down(adapter); igb_up(adapter); } else igb_reset(adapter); - } else - retval = ((hw->phy.media_type == e1000_media_type_fiber) ? - igb_setup_link(hw) : igb_force_mac_fc(hw)); + } else { + if (pause->rx_pause && pause->tx_pause) + hw->fc.requested_mode = e1000_fc_full; + else if (pause->rx_pause && !pause->tx_pause) + hw->fc.requested_mode = e1000_fc_rx_pause; + else if (!pause->rx_pause && pause->tx_pause) + hw->fc.requested_mode = e1000_fc_tx_pause; + else if (!pause->rx_pause && !pause->tx_pause) + hw->fc.requested_mode = e1000_fc_none; + + hw->fc.current_mode = hw->fc.requested_mode; + + retval = ((hw->phy.media_type == e1000_media_type_copper) ? + igb_force_mac_fc(hw) : igb_setup_link(hw)); + } clear_bit(__IGB_RESETTING, &adapter->state); return retval; @@ -1483,8 +1481,7 @@ static int igb_setup_loopback_test(struct igb_adapter *adapter) struct e1000_hw *hw = &adapter->hw; u32 reg; - if (hw->phy.media_type == e1000_media_type_fiber || - hw->phy.media_type == e1000_media_type_internal_serdes) { + if (hw->phy.media_type == e1000_media_type_internal_serdes) { reg = rd32(E1000_RCTL); reg |= E1000_RCTL_LBM_TCVR; wr32(E1000_RCTL, reg); @@ -1843,7 +1840,6 @@ static void igb_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) static int igb_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) { struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) return -EOPNOTSUPP; @@ -1852,11 +1848,6 @@ static int igb_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) !device_can_wakeup(&adapter->pdev->dev)) return wol->wolopts ? -EOPNOTSUPP : 0; - switch (hw->device_id) { - default: - break; - } - /* these settings will always override what we currently have */ adapter->wol = 0; @@ -2025,7 +2016,7 @@ static void igb_get_strings(struct net_device *netdev, u32 stringset, u8 *data) } } -static struct ethtool_ops igb_ethtool_ops = { +static const struct ethtool_ops igb_ethtool_ops = { .get_settings = igb_get_settings, .set_settings = igb_set_settings, .get_drvinfo = igb_get_drvinfo, diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index adb09d32625..943186b7848 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -65,6 +65,7 @@ static struct pci_device_id igb_pci_tbl[] = { { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS), board_82575 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_FIBER), board_82575 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES), board_82575 }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES_QUAD), board_82575 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER), board_82575 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_COPPER), board_82575 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_FIBER_SERDES), board_82575 }, @@ -93,13 +94,15 @@ static void igb_clean_all_tx_rings(struct igb_adapter *); static void igb_clean_all_rx_rings(struct igb_adapter *); static void igb_clean_tx_ring(struct igb_ring *); static void igb_clean_rx_ring(struct igb_ring *); -static void igb_set_multi(struct net_device *); +static void igb_set_rx_mode(struct net_device *); static void igb_update_phy_info(unsigned long); static void igb_watchdog(unsigned long); static void igb_watchdog_task(struct work_struct *); -static int igb_xmit_frame_ring_adv(struct sk_buff *, struct net_device *, - struct igb_ring *); -static int igb_xmit_frame_adv(struct sk_buff *skb, struct net_device *); +static netdev_tx_t igb_xmit_frame_ring_adv(struct sk_buff *, + struct net_device *, + struct igb_ring *); +static netdev_tx_t igb_xmit_frame_adv(struct sk_buff *skb, + struct net_device *); static struct net_device_stats *igb_get_stats(struct net_device *); static int igb_change_mtu(struct net_device *, int); static int igb_set_mac(struct net_device *, void *); @@ -127,7 +130,7 @@ static void igb_restore_vlan(struct igb_adapter *); static void igb_ping_all_vfs(struct igb_adapter *); static void igb_msg_task(struct igb_adapter *); static int igb_rcv_msg_from_vf(struct igb_adapter *, u32); -static void igb_set_mc_list_pools(struct igb_adapter *, int, u16); +static inline void igb_set_rah_pool(struct e1000_hw *, int , int); static void igb_vmm_control(struct igb_adapter *); static int igb_set_vf_mac(struct igb_adapter *adapter, int, unsigned char *); static void igb_restore_vf_multicasts(struct igb_adapter *adapter); @@ -151,6 +154,12 @@ static inline int igb_set_vf_rlpml(struct igb_adapter *adapter, int size, struct e1000_hw *hw = &adapter->hw; u32 vmolr; + /* if it isn't the PF check to see if VFs are enabled and + * increase the size to support vlan tags */ + if (vfn < adapter->vfs_allocated_count && + adapter->vf_data[vfn].vlans_enabled) + size += VLAN_TAG_SIZE; + vmolr = rd32(E1000_VMOLR(vfn)); vmolr &= ~E1000_VMOLR_RLPML_MASK; vmolr |= size | E1000_VMOLR_LPE; @@ -818,9 +827,11 @@ static void igb_irq_disable(struct igb_adapter *adapter) struct e1000_hw *hw = &adapter->hw; if (adapter->msix_entries) { - wr32(E1000_EIAM, 0); - wr32(E1000_EIMC, ~0); - wr32(E1000_EIAC, 0); + u32 regval = rd32(E1000_EIAM); + wr32(E1000_EIAM, regval & ~adapter->eims_enable_mask); + wr32(E1000_EIMC, adapter->eims_enable_mask); + regval = rd32(E1000_EIAC); + wr32(E1000_EIAC, regval & ~adapter->eims_enable_mask); } wr32(E1000_IAM, 0); @@ -838,8 +849,10 @@ static void igb_irq_enable(struct igb_adapter *adapter) struct e1000_hw *hw = &adapter->hw; if (adapter->msix_entries) { - wr32(E1000_EIAC, adapter->eims_enable_mask); - wr32(E1000_EIAM, adapter->eims_enable_mask); + u32 regval = rd32(E1000_EIAC); + wr32(E1000_EIAC, regval | adapter->eims_enable_mask); + regval = rd32(E1000_EIAM); + wr32(E1000_EIAM, regval | adapter->eims_enable_mask); wr32(E1000_EIMS, adapter->eims_enable_mask); if (adapter->vfs_allocated_count) wr32(E1000_MBVFIMR, 0xFF); @@ -925,7 +938,7 @@ static void igb_configure(struct igb_adapter *adapter) int i; igb_get_hw_control(adapter); - igb_set_multi(netdev); + igb_set_rx_mode(netdev); igb_restore_vlan(adapter); @@ -1129,7 +1142,7 @@ void igb_reset(struct igb_adapter *adapter) } fc->pause_time = 0xFFFF; fc->send_xon = 1; - fc->type = fc->original_type; + fc->current_mode = fc->requested_mode; /* disable receive for all VFs and wait one second */ if (adapter->vfs_allocated_count) { @@ -1166,7 +1179,8 @@ static const struct net_device_ops igb_netdev_ops = { .ndo_stop = igb_close, .ndo_start_xmit = igb_xmit_frame_adv, .ndo_get_stats = igb_get_stats, - .ndo_set_multicast_list = igb_set_multi, + .ndo_set_rx_mode = igb_set_rx_mode, + .ndo_set_multicast_list = igb_set_rx_mode, .ndo_set_mac_address = igb_set_mac, .ndo_change_mtu = igb_change_mtu, .ndo_do_ioctl = igb_ioctl, @@ -1379,6 +1393,7 @@ static int __devinit igb_probe(struct pci_dev *pdev, netdev->vlan_features |= NETIF_F_TSO; netdev->vlan_features |= NETIF_F_TSO6; netdev->vlan_features |= NETIF_F_IP_CSUM; + netdev->vlan_features |= NETIF_F_IPV6_CSUM; netdev->vlan_features |= NETIF_F_SG; if (pci_using_dac) @@ -1426,8 +1441,8 @@ static int __devinit igb_probe(struct pci_dev *pdev, hw->mac.autoneg = true; hw->phy.autoneg_advertised = 0x2f; - hw->fc.original_type = e1000_fc_default; - hw->fc.type = e1000_fc_default; + hw->fc.requested_mode = e1000_fc_default; + hw->fc.current_mode = e1000_fc_default; adapter->itr_setting = IGB_DEFAULT_ITR; adapter->itr = IGB_START_ITR; @@ -2515,75 +2530,94 @@ static int igb_set_mac(struct net_device *netdev, void *p) memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len); - hw->mac.ops.rar_set(hw, hw->mac.addr, 0); - + igb_rar_set(hw, hw->mac.addr, 0); igb_set_rah_pool(hw, adapter->vfs_allocated_count, 0); return 0; } /** - * igb_set_multi - Multicast and Promiscuous mode set + * igb_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set * @netdev: network interface device structure * - * The set_multi entry point is called whenever the multicast address - * list or the network interface flags are updated. This routine is - * responsible for configuring the hardware for proper multicast, + * The set_rx_mode entry point is called whenever the unicast or multicast + * address lists or the network interface flags are updated. This routine is + * responsible for configuring the hardware for proper unicast, multicast, * promiscuous mode, and all-multi behavior. **/ -static void igb_set_multi(struct net_device *netdev) +static void igb_set_rx_mode(struct net_device *netdev) { struct igb_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - struct e1000_mac_info *mac = &hw->mac; - struct dev_mc_list *mc_ptr; + unsigned int rar_entries = hw->mac.rar_entry_count - + (adapter->vfs_allocated_count + 1); + struct dev_mc_list *mc_ptr = netdev->mc_list; u8 *mta_list = NULL; u32 rctl; int i; /* Check for Promiscuous and All Multicast modes */ - rctl = rd32(E1000_RCTL); if (netdev->flags & IFF_PROMISC) { rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE); rctl &= ~E1000_RCTL_VFE; } else { - if (netdev->flags & IFF_ALLMULTI) { + if (netdev->flags & IFF_ALLMULTI) rctl |= E1000_RCTL_MPE; + else + rctl &= ~E1000_RCTL_MPE; + + if (netdev->uc.count > rar_entries) + rctl |= E1000_RCTL_UPE; + else rctl &= ~E1000_RCTL_UPE; - } else - rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE); rctl |= E1000_RCTL_VFE; } wr32(E1000_RCTL, rctl); - if (netdev->mc_count) { - mta_list = kzalloc(netdev->mc_count * 6, GFP_ATOMIC); - if (!mta_list) { - dev_err(&adapter->pdev->dev, - "failed to allocate multicast filter list\n"); - return; + if (netdev->uc.count && rar_entries) { + struct netdev_hw_addr *ha; + list_for_each_entry(ha, &netdev->uc.list, list) { + if (!rar_entries) + break; + igb_rar_set(hw, ha->addr, rar_entries); + igb_set_rah_pool(hw, adapter->vfs_allocated_count, + rar_entries); + rar_entries--; } } + /* write the addresses in reverse order to avoid write combining */ + for (; rar_entries > 0 ; rar_entries--) { + wr32(E1000_RAH(rar_entries), 0); + wr32(E1000_RAL(rar_entries), 0); + } + wrfl(); - /* The shared function expects a packed array of only addresses. */ - mc_ptr = netdev->mc_list; + if (!netdev->mc_count) { + /* nothing to program, so clear mc list */ + igb_update_mc_addr_list(hw, NULL, 0); + igb_restore_vf_multicasts(adapter); + return; + } + + mta_list = kzalloc(netdev->mc_count * 6, GFP_ATOMIC); + if (!mta_list) { + dev_err(&adapter->pdev->dev, + "failed to allocate multicast filter list\n"); + return; + } + /* The shared function expects a packed array of only addresses. */ for (i = 0; i < netdev->mc_count; i++) { if (!mc_ptr) break; memcpy(mta_list + (i*ETH_ALEN), mc_ptr->dmi_addr, ETH_ALEN); mc_ptr = mc_ptr->next; } - igb_update_mc_addr_list(hw, mta_list, i, - adapter->vfs_allocated_count + 1, - mac->rar_entry_count); - - igb_set_mc_list_pools(adapter, i, mac->rar_entry_count); - igb_restore_vf_multicasts(adapter); - + igb_update_mc_addr_list(hw, mta_list, i); kfree(mta_list); + igb_restore_vf_multicasts(adapter); } /* Need to wait a few seconds after link up to get diagnostic information from @@ -2618,10 +2652,6 @@ static bool igb_has_link(struct igb_adapter *adapter) link_active = true; } break; - case e1000_media_type_fiber: - ret_val = hw->mac.ops.check_for_link(hw); - link_active = !!(rd32(E1000_STATUS) & E1000_STATUS_LU); - break; case e1000_media_type_internal_serdes: ret_val = hw->mac.ops.check_for_link(hw); link_active = hw->mac.serdes_has_link; @@ -3298,9 +3328,9 @@ static int igb_maybe_stop_tx(struct net_device *netdev, return __igb_maybe_stop_tx(netdev, tx_ring, size); } -static int igb_xmit_frame_ring_adv(struct sk_buff *skb, - struct net_device *netdev, - struct igb_ring *tx_ring) +static netdev_tx_t igb_xmit_frame_ring_adv(struct sk_buff *skb, + struct net_device *netdev, + struct igb_ring *tx_ring) { struct igb_adapter *adapter = netdev_priv(netdev); unsigned int first; @@ -3388,7 +3418,8 @@ static int igb_xmit_frame_ring_adv(struct sk_buff *skb, return NETDEV_TX_OK; } -static int igb_xmit_frame_adv(struct sk_buff *skb, struct net_device *netdev) +static netdev_tx_t igb_xmit_frame_adv(struct sk_buff *skb, + struct net_device *netdev) { struct igb_adapter *adapter = netdev_priv(netdev); struct igb_ring *tx_ring; @@ -3401,7 +3432,7 @@ static int igb_xmit_frame_adv(struct sk_buff *skb, struct net_device *netdev) * to a flow. Right now, performance is impacted slightly negatively * if using multiple tx queues. If the stack breaks away from a * single qdisc implementation, we can look at this again. */ - return (igb_xmit_frame_ring_adv(skb, netdev, tx_ring)); + return igb_xmit_frame_ring_adv(skb, netdev, tx_ring); } /** @@ -3938,7 +3969,7 @@ static int igb_set_vf_multicasts(struct igb_adapter *adapter, vf_data->vf_mc_hashes[i] = hash_list[i];; /* Flush and reset the mta with the new values */ - igb_set_multi(adapter->netdev); + igb_set_rx_mode(adapter->netdev); return 0; } @@ -3981,6 +4012,8 @@ static void igb_clear_vf_vfta(struct igb_adapter *adapter, u32 vf) wr32(E1000_VLVF(i), reg); } + + adapter->vf_data[vf].vlans_enabled = 0; } static s32 igb_vlvf_set(struct igb_adapter *adapter, u32 vid, bool add, u32 vf) @@ -4029,6 +4062,22 @@ static s32 igb_vlvf_set(struct igb_adapter *adapter, u32 vid, bool add, u32 vf) reg |= vid; wr32(E1000_VLVF(i), reg); + + /* do not modify RLPML for PF devices */ + if (vf >= adapter->vfs_allocated_count) + return 0; + + if (!adapter->vf_data[vf].vlans_enabled) { + u32 size; + reg = rd32(E1000_VMOLR(vf)); + size = reg & E1000_VMOLR_RLPML_MASK; + size += 4; + reg &= ~E1000_VMOLR_RLPML_MASK; + reg |= size; + wr32(E1000_VMOLR(vf), reg); + } + adapter->vf_data[vf].vlans_enabled++; + return 0; } } else { @@ -4041,6 +4090,21 @@ static s32 igb_vlvf_set(struct igb_adapter *adapter, u32 vid, bool add, u32 vf) igb_vfta_set(hw, vid, false); } wr32(E1000_VLVF(i), reg); + + /* do not modify RLPML for PF devices */ + if (vf >= adapter->vfs_allocated_count) + return 0; + + adapter->vf_data[vf].vlans_enabled--; + if (!adapter->vf_data[vf].vlans_enabled) { + u32 size; + reg = rd32(E1000_VMOLR(vf)); + size = reg & E1000_VMOLR_RLPML_MASK; + size -= 4; + reg &= ~E1000_VMOLR_RLPML_MASK; + reg |= size; + wr32(E1000_VMOLR(vf), reg); + } return 0; } } @@ -4072,13 +4136,14 @@ static inline void igb_vf_reset_event(struct igb_adapter *adapter, u32 vf) adapter->vf_data[vf].num_vf_mc_hashes = 0; /* Flush and reset the mta with the new values */ - igb_set_multi(adapter->netdev); + igb_set_rx_mode(adapter->netdev); } static inline void igb_vf_reset_msg(struct igb_adapter *adapter, u32 vf) { struct e1000_hw *hw = &adapter->hw; unsigned char *vf_mac = adapter->vf_data[vf].vf_mac_addresses; + int rar_entry = hw->mac.rar_entry_count - (vf + 1); u32 reg, msgbuf[3]; u8 *addr = (u8 *)(&msgbuf[1]); @@ -4086,8 +4151,8 @@ static inline void igb_vf_reset_msg(struct igb_adapter *adapter, u32 vf) igb_vf_reset_event(adapter, vf); /* set vf mac address */ - igb_rar_set(hw, vf_mac, vf + 1); - igb_set_rah_pool(hw, vf, vf + 1); + igb_rar_set(hw, vf_mac, rar_entry); + igb_set_rah_pool(hw, vf, rar_entry); /* enable transmit and receive for vf */ reg = rd32(E1000_VFTE); @@ -4542,6 +4607,20 @@ static inline void igb_rx_checksum_adv(struct igb_adapter *adapter, adapter->hw_csum_good++; } +static inline u16 igb_get_hlen(struct igb_adapter *adapter, + union e1000_adv_rx_desc *rx_desc) +{ + /* HW will not DMA in data larger than the given buffer, even if it + * parses the (NFS, of course) header to be larger. In that case, it + * fills the header buffer and spills the rest into the page. + */ + u16 hlen = (le16_to_cpu(rx_desc->wb.lower.lo_dword.hdr_info) & + E1000_RXDADV_HDRBUFLEN_MASK) >> E1000_RXDADV_HDRBUFLEN_SHIFT; + if (hlen > adapter->rx_ps_hdr_size) + hlen = adapter->rx_ps_hdr_size; + return hlen; +} + static bool igb_clean_rx_irq_adv(struct igb_ring *rx_ring, int *work_done, int budget) { @@ -4556,7 +4635,8 @@ static bool igb_clean_rx_irq_adv(struct igb_ring *rx_ring, int cleaned_count = 0; unsigned int total_bytes = 0, total_packets = 0; unsigned int i; - u32 length, hlen, staterr; + u32 staterr; + u16 length; i = rx_ring->next_to_clean; buffer_info = &rx_ring->buffer_info[i]; @@ -4593,17 +4673,8 @@ static bool igb_clean_rx_irq_adv(struct igb_ring *rx_ring, goto send_up; } - /* HW will not DMA in data larger than the given buffer, even - * if it parses the (NFS, of course) header to be larger. In - * that case, it fills the header buffer and spills the rest - * into the page. - */ - hlen = (le16_to_cpu(rx_desc->wb.lower.lo_dword.hdr_info) & - E1000_RXDADV_HDRBUFLEN_MASK) >> E1000_RXDADV_HDRBUFLEN_SHIFT; - if (hlen > adapter->rx_ps_hdr_size) - hlen = adapter->rx_ps_hdr_size; - - if (!skb_shinfo(skb)->nr_frags) { + if (buffer_info->dma) { + u16 hlen = igb_get_hlen(adapter, rx_desc); pci_unmap_single(pdev, buffer_info->dma, adapter->rx_ps_hdr_size, PCI_DMA_FROMDEVICE); @@ -4843,8 +4914,6 @@ static int igb_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) data->phy_id = adapter->hw.phy.addr; break; case SIOCGMIIREG: - if (!capable(CAP_NET_ADMIN)) - return -EPERM; if (igb_read_phy_reg(&adapter->hw, data->reg_num & 0x1F, &data->val_out)) return -EIO; @@ -5033,6 +5102,34 @@ static int igb_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) } } +s32 igb_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value) +{ + struct igb_adapter *adapter = hw->back; + u16 cap_offset; + + cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP); + if (!cap_offset) + return -E1000_ERR_CONFIG; + + pci_read_config_word(adapter->pdev, cap_offset + reg, value); + + return 0; +} + +s32 igb_write_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value) +{ + struct igb_adapter *adapter = hw->back; + u16 cap_offset; + + cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP); + if (!cap_offset) + return -E1000_ERR_CONFIG; + + pci_write_config_word(adapter->pdev, cap_offset + reg, *value); + + return 0; +} + static void igb_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp) { @@ -5136,14 +5233,6 @@ int igb_set_spd_dplx(struct igb_adapter *adapter, u16 spddplx) mac->autoneg = 0; - /* Fiber NICs only allow 1000 gbps Full duplex */ - if ((adapter->hw.phy.media_type == e1000_media_type_fiber) && - spddplx != (SPEED_1000 + DUPLEX_FULL)) { - dev_err(&adapter->pdev->dev, - "Unsupported Speed/Duplex configuration\n"); - return -EINVAL; - } - switch (spddplx) { case SPEED_10 + DUPLEX_HALF: mac->forced_speed_duplex = ADVERTISE_10_HALF; @@ -5202,7 +5291,7 @@ static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake) if (wufc) { igb_setup_rctl(adapter); - igb_set_multi(netdev); + igb_set_rx_mode(netdev); /* turn on all-multi mode if wake on multicast is enabled */ if (wufc & E1000_WUFC_MC) { @@ -5452,29 +5541,17 @@ static void igb_io_resume(struct pci_dev *pdev) igb_get_hw_control(adapter); } -static void igb_set_mc_list_pools(struct igb_adapter *adapter, - int entry_count, u16 total_rar_filters) -{ - struct e1000_hw *hw = &adapter->hw; - int i = adapter->vfs_allocated_count + 1; - - if ((i + entry_count) < total_rar_filters) - total_rar_filters = i + entry_count; - - for (; i < total_rar_filters; i++) - igb_set_rah_pool(hw, adapter->vfs_allocated_count, i); -} - static int igb_set_vf_mac(struct igb_adapter *adapter, int vf, unsigned char *mac_addr) { struct e1000_hw *hw = &adapter->hw; - int rar_entry = vf + 1; /* VF MAC addresses start at entry 1 */ - - igb_rar_set(hw, mac_addr, rar_entry); + /* VF MAC addresses start at end of receive addresses and moves + * torwards the first, as a result a collision should not be possible */ + int rar_entry = hw->mac.rar_entry_count - (vf + 1); memcpy(adapter->vf_data[vf].vf_mac_addresses, mac_addr, ETH_ALEN); + igb_rar_set(hw, mac_addr, rar_entry); igb_set_rah_pool(hw, vf, rar_entry); return 0; |