aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/igb/e1000_82575.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/igb/e1000_82575.c')
-rw-r--r--drivers/net/igb/e1000_82575.c58
1 files changed, 58 insertions, 0 deletions
diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c
index 606c25c56a0..c4506bf1fca 100644
--- a/drivers/net/igb/e1000_82575.c
+++ b/drivers/net/igb/e1000_82575.c
@@ -61,6 +61,7 @@ static void igb_release_swfw_sync_82575(struct e1000_hw *, u16);
static bool igb_sgmii_active_82575(struct e1000_hw *);
static s32 igb_reset_init_script_82575(struct e1000_hw *);
static s32 igb_read_mac_addr_82575(struct e1000_hw *);
+static s32 igb_set_pcie_completion_timeout(struct e1000_hw *hw);
static s32 igb_get_invariants_82575(struct e1000_hw *hw)
{
@@ -909,6 +910,12 @@ static s32 igb_reset_hw_82575(struct e1000_hw *hw)
if (ret_val)
hw_dbg("PCI-E Master disable polling has failed.\n");
+ /* set the completion timeout for interface */
+ ret_val = igb_set_pcie_completion_timeout(hw);
+ if (ret_val) {
+ hw_dbg("PCI-E Set completion timeout has failed.\n");
+ }
+
hw_dbg("Masking off all interrupts\n");
wr32(E1000_IMC, 0xffffffff);
@@ -1408,6 +1415,57 @@ void igb_rx_fifo_flush_82575(struct e1000_hw *hw)
}
/**
+ * igb_set_pcie_completion_timeout - set pci-e completion timeout
+ * @hw: pointer to the HW structure
+ *
+ * The defaults for 82575 and 82576 should be in the range of 50us to 50ms,
+ * however the hardware default for these parts is 500us to 1ms which is less
+ * than the 10ms recommended by the pci-e spec. To address this we need to
+ * increase the value to either 10ms to 200ms for capability version 1 config,
+ * or 16ms to 55ms for version 2.
+ **/
+static s32 igb_set_pcie_completion_timeout(struct e1000_hw *hw)
+{
+ u32 gcr = rd32(E1000_GCR);
+ s32 ret_val = 0;
+ u16 pcie_devctl2;
+
+ /* only take action if timeout value is defaulted to 0 */
+ if (gcr & E1000_GCR_CMPL_TMOUT_MASK)
+ goto out;
+
+ /*
+ * if capababilities version is type 1 we can write the
+ * timeout of 10ms to 200ms through the GCR register
+ */
+ if (!(gcr & E1000_GCR_CAP_VER2)) {
+ gcr |= E1000_GCR_CMPL_TMOUT_10ms;
+ goto out;
+ }
+
+ /*
+ * for version 2 capabilities we need to write the config space
+ * directly in order to set the completion timeout value for
+ * 16ms to 55ms
+ */
+ ret_val = igb_read_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2,
+ &pcie_devctl2);
+ if (ret_val)
+ goto out;
+
+ pcie_devctl2 |= PCIE_DEVICE_CONTROL2_16ms;
+
+ ret_val = igb_write_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2,
+ &pcie_devctl2);
+out:
+ /* disable completion timeout resend */
+ gcr &= ~E1000_GCR_CMPL_TMOUT_RESEND;
+
+ wr32(E1000_GCR, gcr);
+ return ret_val;
+}
+
+/**
* igb_vmdq_set_loopback_pf - enable or disable vmdq loopback
* @hw: pointer to the hardware struct
* @enable: state to enter, either enabled or disabled