aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/igb/e1000_82575.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/igb/e1000_82575.c')
-rw-r--r--drivers/net/igb/e1000_82575.c572
1 files changed, 378 insertions, 194 deletions
diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c
index f8f5772557c..e8e9e9194a8 100644
--- a/drivers/net/igb/e1000_82575.c
+++ b/drivers/net/igb/e1000_82575.c
@@ -46,7 +46,10 @@ static s32 igb_get_cfg_done_82575(struct e1000_hw *);
static s32 igb_init_hw_82575(struct e1000_hw *);
static s32 igb_phy_hw_reset_sgmii_82575(struct e1000_hw *);
static s32 igb_read_phy_reg_sgmii_82575(struct e1000_hw *, u32, u16 *);
+static s32 igb_read_phy_reg_82580(struct e1000_hw *, u32, u16 *);
+static s32 igb_write_phy_reg_82580(struct e1000_hw *, u32, u16);
static s32 igb_reset_hw_82575(struct e1000_hw *);
+static s32 igb_reset_hw_82580(struct e1000_hw *);
static s32 igb_set_d0_lplu_state_82575(struct e1000_hw *, bool);
static s32 igb_setup_copper_link_82575(struct e1000_hw *);
static s32 igb_setup_serdes_link_82575(struct e1000_hw *);
@@ -62,6 +65,12 @@ static s32 igb_reset_init_script_82575(struct e1000_hw *);
static s32 igb_read_mac_addr_82575(struct e1000_hw *);
static s32 igb_set_pcie_completion_timeout(struct e1000_hw *hw);
+static const u16 e1000_82580_rxpbs_table[] =
+ { 36, 72, 144, 1, 2, 4, 8, 16,
+ 35, 70, 140 };
+#define E1000_82580_RXPBS_TABLE_SIZE \
+ (sizeof(e1000_82580_rxpbs_table)/sizeof(u16))
+
static s32 igb_get_invariants_82575(struct e1000_hw *hw)
{
struct e1000_phy_info *phy = &hw->phy;
@@ -81,12 +90,20 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw)
break;
case E1000_DEV_ID_82576:
case E1000_DEV_ID_82576_NS:
+ case E1000_DEV_ID_82576_NS_SERDES:
case E1000_DEV_ID_82576_FIBER:
case E1000_DEV_ID_82576_SERDES:
case E1000_DEV_ID_82576_QUAD_COPPER:
case E1000_DEV_ID_82576_SERDES_QUAD:
mac->type = e1000_82576;
break;
+ case E1000_DEV_ID_82580_COPPER:
+ case E1000_DEV_ID_82580_FIBER:
+ case E1000_DEV_ID_82580_SERDES:
+ case E1000_DEV_ID_82580_SGMII:
+ case E1000_DEV_ID_82580_COPPER_DUAL:
+ mac->type = e1000_82580;
+ break;
default:
return -E1000_ERR_MAC_INIT;
break;
@@ -109,6 +126,7 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw)
dev_spec->sgmii_active = true;
ctrl_ext |= E1000_CTRL_I2C_ENA;
break;
+ case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX:
case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES:
hw->phy.media_type = e1000_media_type_internal_serdes;
ctrl_ext |= E1000_CTRL_I2C_ENA;
@@ -120,12 +138,26 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw)
wr32(E1000_CTRL_EXT, ctrl_ext);
+ /*
+ * if using i2c make certain the MDICNFG register is cleared to prevent
+ * communications from being misrouted to the mdic registers
+ */
+ if ((ctrl_ext & E1000_CTRL_I2C_ENA) && (hw->mac.type == e1000_82580))
+ wr32(E1000_MDICNFG, 0);
+
/* Set mta register count */
mac->mta_reg_count = 128;
/* Set rar entry count */
mac->rar_entry_count = E1000_RAR_ENTRIES_82575;
if (mac->type == e1000_82576)
mac->rar_entry_count = E1000_RAR_ENTRIES_82576;
+ if (mac->type == e1000_82580)
+ mac->rar_entry_count = E1000_RAR_ENTRIES_82580;
+ /* reset */
+ if (mac->type == e1000_82580)
+ mac->ops.reset_hw = igb_reset_hw_82580;
+ else
+ mac->ops.reset_hw = igb_reset_hw_82575;
/* Set if part includes ASF firmware */
mac->asf_firmware_present = true;
/* Set if manageability features are enabled. */
@@ -193,6 +225,10 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw)
phy->ops.reset = igb_phy_hw_reset_sgmii_82575;
phy->ops.read_reg = igb_read_phy_reg_sgmii_82575;
phy->ops.write_reg = igb_write_phy_reg_sgmii_82575;
+ } else if (hw->mac.type == e1000_82580) {
+ phy->ops.reset = igb_phy_hw_reset;
+ phy->ops.read_reg = igb_read_phy_reg_82580;
+ phy->ops.write_reg = igb_write_phy_reg_82580;
} else {
phy->ops.reset = igb_phy_hw_reset;
phy->ops.read_reg = igb_read_phy_reg_igp;
@@ -224,6 +260,12 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw)
phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82575;
phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state;
break;
+ case I82580_I_PHY_ID:
+ phy->type = e1000_phy_82580;
+ phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_82580;
+ phy->ops.get_cable_length = igb_get_cable_length_82580;
+ phy->ops.get_phy_info = igb_get_phy_info_82580;
+ break;
default:
return -E1000_ERR_PHY;
}
@@ -240,9 +282,10 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw)
**/
static s32 igb_acquire_phy_82575(struct e1000_hw *hw)
{
- u16 mask;
+ u16 mask = E1000_SWFW_PHY0_SM;
- mask = hw->bus.func ? E1000_SWFW_PHY1_SM : E1000_SWFW_PHY0_SM;
+ if (hw->bus.func == E1000_FUNC_1)
+ mask = E1000_SWFW_PHY1_SM;
return igb_acquire_swfw_sync_82575(hw, mask);
}
@@ -256,9 +299,11 @@ static s32 igb_acquire_phy_82575(struct e1000_hw *hw)
**/
static void igb_release_phy_82575(struct e1000_hw *hw)
{
- u16 mask;
+ u16 mask = E1000_SWFW_PHY0_SM;
+
+ if (hw->bus.func == E1000_FUNC_1)
+ mask = E1000_SWFW_PHY1_SM;
- mask = hw->bus.func ? E1000_SWFW_PHY1_SM : E1000_SWFW_PHY0_SM;
igb_release_swfw_sync_82575(hw, mask);
}
@@ -274,45 +319,23 @@ static void igb_release_phy_82575(struct e1000_hw *hw)
static s32 igb_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset,
u16 *data)
{
- struct e1000_phy_info *phy = &hw->phy;
- u32 i, i2ccmd = 0;
+ s32 ret_val = -E1000_ERR_PARAM;
if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) {
hw_dbg("PHY Address %u is out of range\n", offset);
- return -E1000_ERR_PARAM;
+ goto out;
}
- /*
- * Set up Op-code, Phy Address, and register address in the I2CCMD
- * register. The MAC will take care of interfacing with the
- * PHY to retrieve the desired data.
- */
- i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) |
- (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) |
- (E1000_I2CCMD_OPCODE_READ));
-
- wr32(E1000_I2CCMD, i2ccmd);
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ goto out;
- /* Poll the ready bit to see if the I2C read completed */
- for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) {
- udelay(50);
- i2ccmd = rd32(E1000_I2CCMD);
- if (i2ccmd & E1000_I2CCMD_READY)
- break;
- }
- if (!(i2ccmd & E1000_I2CCMD_READY)) {
- hw_dbg("I2CCMD Read did not complete\n");
- return -E1000_ERR_PHY;
- }
- if (i2ccmd & E1000_I2CCMD_ERROR) {
- hw_dbg("I2CCMD Error bit set\n");
- return -E1000_ERR_PHY;
- }
+ ret_val = igb_read_phy_reg_i2c(hw, offset, data);
- /* Need to byte-swap the 16-bit value. */
- *data = ((i2ccmd >> 8) & 0x00FF) | ((i2ccmd << 8) & 0xFF00);
+ hw->phy.ops.release(hw);
- return 0;
+out:
+ return ret_val;
}
/**
@@ -327,47 +350,24 @@ static s32 igb_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset,
static s32 igb_write_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset,
u16 data)
{
- struct e1000_phy_info *phy = &hw->phy;
- u32 i, i2ccmd = 0;
- u16 phy_data_swapped;
+ s32 ret_val = -E1000_ERR_PARAM;
+
if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) {
hw_dbg("PHY Address %d is out of range\n", offset);
- return -E1000_ERR_PARAM;
+ goto out;
}
- /* Swap the data bytes for the I2C interface */
- phy_data_swapped = ((data >> 8) & 0x00FF) | ((data << 8) & 0xFF00);
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ goto out;
- /*
- * Set up Op-code, Phy Address, and register address in the I2CCMD
- * register. The MAC will take care of interfacing with the
- * PHY to retrieve the desired data.
- */
- i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) |
- (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) |
- E1000_I2CCMD_OPCODE_WRITE |
- phy_data_swapped);
-
- wr32(E1000_I2CCMD, i2ccmd);
-
- /* Poll the ready bit to see if the I2C read completed */
- for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) {
- udelay(50);
- i2ccmd = rd32(E1000_I2CCMD);
- if (i2ccmd & E1000_I2CCMD_READY)
- break;
- }
- if (!(i2ccmd & E1000_I2CCMD_READY)) {
- hw_dbg("I2CCMD Write did not complete\n");
- return -E1000_ERR_PHY;
- }
- if (i2ccmd & E1000_I2CCMD_ERROR) {
- hw_dbg("I2CCMD Error bit set\n");
- return -E1000_ERR_PHY;
- }
+ ret_val = igb_write_phy_reg_i2c(hw, offset, data);
- return 0;
+ hw->phy.ops.release(hw);
+
+out:
+ return ret_val;
}
/**
@@ -676,6 +676,10 @@ static s32 igb_get_cfg_done_82575(struct e1000_hw *hw)
if (hw->bus.func == 1)
mask = E1000_NVM_CFG_DONE_PORT_1;
+ else if (hw->bus.func == E1000_FUNC_2)
+ mask = E1000_NVM_CFG_DONE_PORT_2;
+ else if (hw->bus.func == E1000_FUNC_3)
+ mask = E1000_NVM_CFG_DONE_PORT_3;
while (timeout) {
if (rd32(E1000_EEMNGCTL) & mask)
@@ -706,9 +710,7 @@ static s32 igb_check_for_link_82575(struct e1000_hw *hw)
s32 ret_val;
u16 speed, duplex;
- /* SGMII link check is done through the PCS register. */
- if ((hw->phy.media_type != e1000_media_type_copper) ||
- (igb_sgmii_active_82575(hw))) {
+ if (hw->phy.media_type != e1000_media_type_copper) {
ret_val = igb_get_pcs_speed_and_duplex_82575(hw, &speed,
&duplex);
/*
@@ -723,6 +725,7 @@ static s32 igb_check_for_link_82575(struct e1000_hw *hw)
return ret_val;
}
+
/**
* igb_get_pcs_speed_and_duplex_82575 - Retrieve current speed/duplex
* @hw: pointer to the HW structure
@@ -788,13 +791,27 @@ static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, u16 *speed,
void igb_shutdown_serdes_link_82575(struct e1000_hw *hw)
{
u32 reg;
+ u16 eeprom_data = 0;
if (hw->phy.media_type != e1000_media_type_internal_serdes ||
igb_sgmii_active_82575(hw))
return;
- /* if the management interface is not enabled, then power down */
- if (!igb_enable_mng_pass_thru(hw)) {
+ if (hw->bus.func == E1000_FUNC_0)
+ hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
+ else if (hw->mac.type == e1000_82580)
+ hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A +
+ NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1,
+ &eeprom_data);
+ else if (hw->bus.func == E1000_FUNC_1)
+ hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
+
+ /*
+ * If APM is not enabled in the EEPROM and management interface is
+ * not enabled, then power down.
+ */
+ if (!(eeprom_data & E1000_NVM_APME_82575) &&
+ !igb_enable_mng_pass_thru(hw)) {
/* Disable PCS to turn off link */
reg = rd32(E1000_PCS_CFG0);
reg &= ~E1000_PCS_CFG_PCS_EN;
@@ -908,6 +925,11 @@ static s32 igb_init_hw_82575(struct e1000_hw *hw)
for (i = 0; i < mac->mta_reg_count; i++)
array_wr32(E1000_MTA, i, 0);
+ /* Zero out the Unicast HASH table */
+ hw_dbg("Zeroing the UTA\n");
+ for (i = 0; i < mac->uta_reg_count; i++)
+ array_wr32(E1000_UTA, i, 0);
+
/* Setup link and flow control */
ret_val = igb_setup_link(hw);
@@ -934,7 +956,6 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw)
{
u32 ctrl;
s32 ret_val;
- bool link;
ctrl = rd32(E1000_CTRL);
ctrl |= E1000_CTRL_SLU;
@@ -946,6 +967,9 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw)
goto out;
if (igb_sgmii_active_82575(hw) && !hw->phy.reset_disable) {
+ /* allow time for SFP cage time to power up phy */
+ msleep(300);
+
ret_val = hw->phy.ops.reset(hw);
if (ret_val) {
hw_dbg("Error resetting the PHY.\n");
@@ -959,6 +983,9 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw)
case e1000_phy_igp_3:
ret_val = igb_copper_link_setup_igp(hw);
break;
+ case e1000_phy_82580:
+ ret_val = igb_copper_link_setup_82580(hw);
+ break;
default:
ret_val = -E1000_ERR_PHY;
break;
@@ -967,57 +994,24 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw)
if (ret_val)
goto out;
- if (hw->mac.autoneg) {
- /*
- * Setup autoneg and flow control advertisement
- * and perform autonegotiation.
- */
- ret_val = igb_copper_link_autoneg(hw);
- if (ret_val)
- goto out;
- } else {
- /*
- * PHY will be set to 10H, 10F, 100H or 100F
- * depending on user settings.
- */
- hw_dbg("Forcing Speed and Duplex\n");
- ret_val = hw->phy.ops.force_speed_duplex(hw);
- if (ret_val) {
- hw_dbg("Error Forcing Speed and Duplex\n");
- goto out;
- }
- }
-
- /*
- * Check link status. Wait up to 100 microseconds for link to become
- * valid.
- */
- ret_val = igb_phy_has_link(hw, COPPER_LINK_UP_LIMIT, 10, &link);
- if (ret_val)
- goto out;
-
- if (link) {
- hw_dbg("Valid link established!!!\n");
- /* Config the MAC and PHY after link is up */
- igb_config_collision_dist(hw);
- ret_val = igb_config_fc_after_link_up(hw);
- } else {
- hw_dbg("Unable to establish link!!!\n");
- }
-
+ ret_val = igb_setup_copper_link(hw);
out:
return ret_val;
}
/**
- * igb_setup_serdes_link_82575 - Setup link for fiber/serdes
+ * igb_setup_serdes_link_82575 - Setup link for serdes
* @hw: pointer to the HW structure
*
- * Configures speed and duplex for fiber and serdes links.
+ * Configure the physical coding sub-layer (PCS) link. The PCS link is
+ * used on copper connections where the serialized gigabit media independent
+ * interface (sgmii), or serdes fiber is being used. Configures the link
+ * for auto-negotiation or forces speed/duplex.
**/
static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw)
{
- u32 ctrl_reg, reg;
+ u32 ctrl_ext, ctrl_reg, reg;
+ bool pcs_autoneg;
if ((hw->phy.media_type != e1000_media_type_internal_serdes) &&
!igb_sgmii_active_82575(hw))
@@ -1032,9 +1026,9 @@ static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw)
wr32(E1000_SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK);
/* power on the sfp cage if present */
- reg = rd32(E1000_CTRL_EXT);
- reg &= ~E1000_CTRL_EXT_SDP3_DATA;
- wr32(E1000_CTRL_EXT, reg);
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+ ctrl_ext &= ~E1000_CTRL_EXT_SDP3_DATA;
+ wr32(E1000_CTRL_EXT, ctrl_ext);
ctrl_reg = rd32(E1000_CTRL);
ctrl_reg |= E1000_CTRL_SLU;
@@ -1051,15 +1045,31 @@ static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw)
reg = rd32(E1000_PCS_LCTL);
- if (igb_sgmii_active_82575(hw)) {
- /* allow time for SFP cage to power up phy */
- msleep(300);
+ /* default pcs_autoneg to the same setting as mac autoneg */
+ pcs_autoneg = hw->mac.autoneg;
- /* AN time out should be disabled for SGMII mode */
+ switch (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK) {
+ case E1000_CTRL_EXT_LINK_MODE_SGMII:
+ /* sgmii mode lets the phy handle forcing speed/duplex */
+ pcs_autoneg = true;
+ /* autoneg time out should be disabled for SGMII mode */
reg &= ~(E1000_PCS_LCTL_AN_TIMEOUT);
- } else {
+ break;
+ case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX:
+ /* disable PCS autoneg and support parallel detect only */
+ pcs_autoneg = false;
+ default:
+ /*
+ * non-SGMII modes only supports a speed of 1000/Full for the
+ * link so it is best to just force the MAC and let the pcs
+ * link either autoneg or be forced to 1000/Full
+ */
ctrl_reg |= E1000_CTRL_SPD_1000 | E1000_CTRL_FRCSPD |
E1000_CTRL_FD | E1000_CTRL_FRCDPX;
+
+ /* set speed of 1000/Full if speed/duplex is forced */
+ reg |= E1000_PCS_LCTL_FSV_1000 | E1000_PCS_LCTL_FDV_FULL;
+ break;
}
wr32(E1000_CTRL, ctrl_reg);
@@ -1070,7 +1080,6 @@ static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw)
* mode that will be compatible with older link partners and switches.
* However, both are supported by the hardware and some drivers/tools.
*/
-
reg &= ~(E1000_PCS_LCTL_AN_ENABLE | E1000_PCS_LCTL_FLV_LINK_UP |
E1000_PCS_LCTL_FSD | E1000_PCS_LCTL_FORCE_LINK);
@@ -1080,25 +1089,18 @@ static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw)
*/
reg |= E1000_PCS_LCTL_FORCE_FCTRL;
- /*
- * we always set sgmii to autoneg since it is the phy that will be
- * forcing the link and the serdes is just a go-between
- */
- if (hw->mac.autoneg || igb_sgmii_active_82575(hw)) {
+ if (pcs_autoneg) {
/* Set PCS register for autoneg */
- reg |= E1000_PCS_LCTL_FSV_1000 | /* Force 1000 */
- E1000_PCS_LCTL_FDV_FULL | /* SerDes Full duplex */
- E1000_PCS_LCTL_AN_ENABLE | /* Enable Autoneg */
- E1000_PCS_LCTL_AN_RESTART; /* Restart autoneg */
- hw_dbg("Configuring Autoneg; PCS_LCTL = 0x%08X\n", reg);
+ reg |= E1000_PCS_LCTL_AN_ENABLE | /* Enable Autoneg */
+ E1000_PCS_LCTL_AN_RESTART; /* Restart autoneg */
+ hw_dbg("Configuring Autoneg:PCS_LCTL=0x%08X\n", reg);
} else {
- /* Set PCS register for forced speed */
- reg |= E1000_PCS_LCTL_FLV_LINK_UP | /* Force link up */
- E1000_PCS_LCTL_FSV_1000 | /* Force 1000 */
- E1000_PCS_LCTL_FDV_FULL | /* SerDes Full duplex */
- E1000_PCS_LCTL_FSD | /* Force Speed */
- E1000_PCS_LCTL_FORCE_LINK; /* Force Link */
- hw_dbg("Configuring Forced Link; PCS_LCTL = 0x%08X\n", reg);
+ /* Set PCS register for forced link */
+ reg |= E1000_PCS_LCTL_FSD | /* Force Speed */
+ E1000_PCS_LCTL_FORCE_LINK | /* Force Link */
+ E1000_PCS_LCTL_FLV_LINK_UP; /* Force link value up */
+
+ hw_dbg("Configuring Forced Link:PCS_LCTL=0x%08X\n", reg);
}
wr32(E1000_PCS_LCTL, reg);
@@ -1167,9 +1169,18 @@ static s32 igb_read_mac_addr_82575(struct e1000_hw *hw)
{
s32 ret_val = 0;
- if (igb_check_alt_mac_addr(hw))
- ret_val = igb_read_mac_addr(hw);
+ /*
+ * If there's an alternate MAC address place it in RAR0
+ * so that it will override the Si installed default perm
+ * address.
+ */
+ ret_val = igb_check_alt_mac_addr(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = igb_read_mac_addr(hw);
+out:
return ret_val;
}
@@ -1181,61 +1192,59 @@ static s32 igb_read_mac_addr_82575(struct e1000_hw *hw)
**/
static void igb_clear_hw_cntrs_82575(struct e1000_hw *hw)
{
- u32 temp;
-
igb_clear_hw_cntrs_base(hw);
- temp = rd32(E1000_PRC64);
- temp = rd32(E1000_PRC127);
- temp = rd32(E1000_PRC255);
- temp = rd32(E1000_PRC511);
- temp = rd32(E1000_PRC1023);
- temp = rd32(E1000_PRC1522);
- temp = rd32(E1000_PTC64);
- temp = rd32(E1000_PTC127);
- temp = rd32(E1000_PTC255);
- temp = rd32(E1000_PTC511);
- temp = rd32(E1000_PTC1023);
- temp = rd32(E1000_PTC1522);
-
- temp = rd32(E1000_ALGNERRC);
- temp = rd32(E1000_RXERRC);
- temp = rd32(E1000_TNCRS);
- temp = rd32(E1000_CEXTERR);
- temp = rd32(E1000_TSCTC);
- temp = rd32(E1000_TSCTFC);
-
- temp = rd32(E1000_MGTPRC);
- temp = rd32(E1000_MGTPDC);
- temp = rd32(E1000_MGTPTC);
-
- temp = rd32(E1000_IAC);
- temp = rd32(E1000_ICRXOC);
-
- temp = rd32(E1000_ICRXPTC);
- temp = rd32(E1000_ICRXATC);
- temp = rd32(E1000_ICTXPTC);
- temp = rd32(E1000_ICTXATC);
- temp = rd32(E1000_ICTXQEC);
- temp = rd32(E1000_ICTXQMTC);
- temp = rd32(E1000_ICRXDMTC);
-
- temp = rd32(E1000_CBTMPC);
- temp = rd32(E1000_HTDPMC);
- temp = rd32(E1000_CBRMPC);
- temp = rd32(E1000_RPTHC);
- temp = rd32(E1000_HGPTC);
- temp = rd32(E1000_HTCBDPC);
- temp = rd32(E1000_HGORCL);
- temp = rd32(E1000_HGORCH);
- temp = rd32(E1000_HGOTCL);
- temp = rd32(E1000_HGOTCH);
- temp = rd32(E1000_LENERRS);
+ rd32(E1000_PRC64);
+ rd32(E1000_PRC127);
+ rd32(E1000_PRC255);
+ rd32(E1000_PRC511);
+ rd32(E1000_PRC1023);
+ rd32(E1000_PRC1522);
+ rd32(E1000_PTC64);
+ rd32(E1000_PTC127);
+ rd32(E1000_PTC255);
+ rd32(E1000_PTC511);
+ rd32(E1000_PTC1023);
+ rd32(E1000_PTC1522);
+
+ rd32(E1000_ALGNERRC);
+ rd32(E1000_RXERRC);
+ rd32(E1000_TNCRS);
+ rd32(E1000_CEXTERR);
+ rd32(E1000_TSCTC);
+ rd32(E1000_TSCTFC);
+
+ rd32(E1000_MGTPRC);
+ rd32(E1000_MGTPDC);
+ rd32(E1000_MGTPTC);
+
+ rd32(E1000_IAC);
+ rd32(E1000_ICRXOC);
+
+ rd32(E1000_ICRXPTC);
+ rd32(E1000_ICRXATC);
+ rd32(E1000_ICTXPTC);
+ rd32(E1000_ICTXATC);
+ rd32(E1000_ICTXQEC);
+ rd32(E1000_ICTXQMTC);
+ rd32(E1000_ICRXDMTC);
+
+ rd32(E1000_CBTMPC);
+ rd32(E1000_HTDPMC);
+ rd32(E1000_CBRMPC);
+ rd32(E1000_RPTHC);
+ rd32(E1000_HGPTC);
+ rd32(E1000_HTCBDPC);
+ rd32(E1000_HGORCL);
+ rd32(E1000_HGORCH);
+ rd32(E1000_HGOTCL);
+ rd32(E1000_HGOTCH);
+ rd32(E1000_LENERRS);
/* This register should not be read in copper configurations */
if (hw->phy.media_type == e1000_media_type_internal_serdes ||
igb_sgmii_active_82575(hw))
- temp = rd32(E1000_SCVPC);
+ rd32(E1000_SCVPC);
}
/**
@@ -1400,8 +1409,183 @@ void igb_vmdq_set_replication_pf(struct e1000_hw *hw, bool enable)
wr32(E1000_VT_CTL, vt_ctl);
}
+/**
+ * igb_read_phy_reg_82580 - Read 82580 MDI control register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Reads the MDI control register in the PHY at offset and stores the
+ * information read to data.
+ **/
+static s32 igb_read_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ u32 mdicnfg = 0;
+ s32 ret_val;
+
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ goto out;
+
+ /*
+ * We config the phy address in MDICNFG register now. Same bits
+ * as before. The values in MDIC can be written but will be
+ * ignored. This allows us to call the old function after
+ * configuring the PHY address in the new register
+ */
+ mdicnfg = (hw->phy.addr << E1000_MDIC_PHY_SHIFT);
+ wr32(E1000_MDICNFG, mdicnfg);
+
+ ret_val = igb_read_phy_reg_mdic(hw, offset, data);
+
+ hw->phy.ops.release(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_write_phy_reg_82580 - Write 82580 MDI control register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write to register at offset
+ *
+ * Writes data to MDI control register in the PHY at offset.
+ **/
+static s32 igb_write_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ u32 mdicnfg = 0;
+ s32 ret_val;
+
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ goto out;
+
+ /*
+ * We config the phy address in MDICNFG register now. Same bits
+ * as before. The values in MDIC can be written but will be
+ * ignored. This allows us to call the old function after
+ * configuring the PHY address in the new register
+ */
+ mdicnfg = (hw->phy.addr << E1000_MDIC_PHY_SHIFT);
+ wr32(E1000_MDICNFG, mdicnfg);
+
+ ret_val = igb_write_phy_reg_mdic(hw, offset, data);
+
+ hw->phy.ops.release(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_reset_hw_82580 - Reset hardware
+ * @hw: pointer to the HW structure
+ *
+ * This resets function or entire device (all ports, etc.)
+ * to a known state.
+ **/
+static s32 igb_reset_hw_82580(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ /* BH SW mailbox bit in SW_FW_SYNC */
+ u16 swmbsw_mask = E1000_SW_SYNCH_MB;
+ u32 ctrl, icr;
+ bool global_device_reset = hw->dev_spec._82575.global_device_reset;
+
+
+ hw->dev_spec._82575.global_device_reset = false;
+
+ /* Get current control state. */
+ ctrl = rd32(E1000_CTRL);
+
+ /*
+ * Prevent the PCI-E bus from sticking if there is no TLP connection
+ * on the last TLP read/write transaction when MAC is reset.
+ */
+ ret_val = igb_disable_pcie_master(hw);
+ if (ret_val)
+ hw_dbg("PCI-E Master disable polling has failed.\n");
+
+ hw_dbg("Masking off all interrupts\n");
+ wr32(E1000_IMC, 0xffffffff);
+ wr32(E1000_RCTL, 0);
+ wr32(E1000_TCTL, E1000_TCTL_PSP);
+ wrfl();
+
+ msleep(10);
+
+ /* Determine whether or not a global dev reset is requested */
+ if (global_device_reset &&
+ igb_acquire_swfw_sync_82575(hw, swmbsw_mask))
+ global_device_reset = false;
+
+ if (global_device_reset &&
+ !(rd32(E1000_STATUS) & E1000_STAT_DEV_RST_SET))
+ ctrl |= E1000_CTRL_DEV_RST;
+ else
+ ctrl |= E1000_CTRL_RST;
+
+ wr32(E1000_CTRL, ctrl);
+
+ /* Add delay to insure DEV_RST has time to complete */
+ if (global_device_reset)
+ msleep(5);
+
+ ret_val = igb_get_auto_rd_done(hw);
+ if (ret_val) {
+ /*
+ * When auto config read does not complete, do not
+ * return with an error. This can happen in situations
+ * where there is no eeprom and prevents getting link.
+ */
+ hw_dbg("Auto Read Done did not complete\n");
+ }
+
+ /* If EEPROM is not present, run manual init scripts */
+ if ((rd32(E1000_EECD) & E1000_EECD_PRES) == 0)
+ igb_reset_init_script_82575(hw);
+
+ /* clear global device reset status bit */
+ wr32(E1000_STATUS, E1000_STAT_DEV_RST_SET);
+
+ /* Clear any pending interrupt events. */
+ wr32(E1000_IMC, 0xffffffff);
+ icr = rd32(E1000_ICR);
+
+ /* Install any alternate MAC address into RAR0 */
+ ret_val = igb_check_alt_mac_addr(hw);
+
+ /* Release semaphore */
+ if (global_device_reset)
+ igb_release_swfw_sync_82575(hw, swmbsw_mask);
+
+ return ret_val;
+}
+
+/**
+ * igb_rxpbs_adjust_82580 - adjust RXPBS value to reflect actual RX PBA size
+ * @data: data received by reading RXPBS register
+ *
+ * The 82580 uses a table based approach for packet buffer allocation sizes.
+ * This function converts the retrieved value into the correct table value
+ * 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7
+ * 0x0 36 72 144 1 2 4 8 16
+ * 0x8 35 70 140 rsv rsv rsv rsv rsv
+ */
+u16 igb_rxpbs_adjust_82580(u32 data)
+{
+ u16 ret_val = 0;
+
+ if (data < E1000_82580_RXPBS_TABLE_SIZE)
+ ret_val = e1000_82580_rxpbs_table[data];
+
+ return ret_val;
+}
+
static struct e1000_mac_operations e1000_mac_ops_82575 = {
- .reset_hw = igb_reset_hw_82575,
.init_hw = igb_init_hw_82575,
.check_for_link = igb_check_for_link_82575,
.rar_set = igb_rar_set,
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-24 03:31:38 +0000