diff options
Diffstat (limited to 'drivers/net/fec_mpc52xx.c')
| -rw-r--r-- | drivers/net/fec_mpc52xx.c | 28 |
1 files changed, 14 insertions, 14 deletions
diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c index 4a43e56b739..25e6cc6840b 100644 --- a/drivers/net/fec_mpc52xx.c +++ b/drivers/net/fec_mpc52xx.c @@ -327,7 +327,6 @@ static int mpc52xx_fec_start_xmit(struct sk_buff *skb, struct net_device *dev) } spin_lock_irqsave(&priv->lock, flags); - dev->trans_start = jiffies; bd = (struct bcom_fec_bd *) bcom_prepare_next_buffer(priv->tx_dmatsk); @@ -436,7 +435,6 @@ static irqreturn_t mpc52xx_fec_rx_interrupt(int irq, void *dev_id) DMA_FROM_DEVICE); length = status & BCOM_FEC_RX_BD_LEN_MASK; skb_put(rskb, length - 4); /* length without CRC32 */ - rskb->dev = dev; rskb->protocol = eth_type_trans(rskb, dev); netif_rx(rskb); @@ -576,12 +574,12 @@ static void mpc52xx_fec_set_multicast_list(struct net_device *dev) out_be32(&fec->gaddr2, 0xffffffff); } else { u32 crc; - struct dev_mc_list *dmi; + struct netdev_hw_addr *ha; u32 gaddr1 = 0x00000000; u32 gaddr2 = 0x00000000; - netdev_for_each_mc_addr(dmi, dev) { - crc = ether_crc_le(6, dmi->dmi_addr) >> 26; + netdev_for_each_mc_addr(ha, dev) { + crc = ether_crc_le(6, ha->addr) >> 26; if (crc >= 32) gaddr1 |= 1 << (crc-32); else @@ -873,7 +871,7 @@ mpc52xx_fec_probe(struct of_device *op, const struct of_device_id *match) priv->ndev = ndev; /* Reserve FEC control zone */ - rv = of_address_to_resource(op->node, 0, &mem); + rv = of_address_to_resource(op->dev.of_node, 0, &mem); if (rv) { printk(KERN_ERR DRIVER_NAME ": " "Error while parsing device node resource\n" ); @@ -921,7 +919,7 @@ mpc52xx_fec_probe(struct of_device *op, const struct of_device_id *match) /* Get the IRQ we need one by one */ /* Control */ - ndev->irq = irq_of_parse_and_map(op->node, 0); + ndev->irq = irq_of_parse_and_map(op->dev.of_node, 0); /* RX */ priv->r_irq = bcom_get_task_irq(priv->rx_dmatsk); @@ -944,20 +942,20 @@ mpc52xx_fec_probe(struct of_device *op, const struct of_device_id *match) /* Start with safe defaults for link connection */ priv->speed = 100; priv->duplex = DUPLEX_HALF; - priv->mdio_speed = ((mpc5xxx_get_bus_frequency(op->node) >> 20) / 5) << 1; + priv->mdio_speed = ((mpc5xxx_get_bus_frequency(op->dev.of_node) >> 20) / 5) << 1; /* The current speed preconfigures the speed of the MII link */ - prop = of_get_property(op->node, "current-speed", &prop_size); + prop = of_get_property(op->dev.of_node, "current-speed", &prop_size); if (prop && (prop_size >= sizeof(u32) * 2)) { priv->speed = prop[0]; priv->duplex = prop[1] ? DUPLEX_FULL : DUPLEX_HALF; } /* If there is a phy handle, then get the PHY node */ - priv->phy_node = of_parse_phandle(op->node, "phy-handle", 0); + priv->phy_node = of_parse_phandle(op->dev.of_node, "phy-handle", 0); /* the 7-wire property means don't use MII mode */ - if (of_find_property(op->node, "fsl,7-wire-mode", NULL)) { + if (of_find_property(op->dev.of_node, "fsl,7-wire-mode", NULL)) { priv->seven_wire_mode = 1; dev_info(&ndev->dev, "using 7-wire PHY mode\n"); } @@ -1065,9 +1063,11 @@ static struct of_device_id mpc52xx_fec_match[] = { MODULE_DEVICE_TABLE(of, mpc52xx_fec_match); static struct of_platform_driver mpc52xx_fec_driver = { - .owner = THIS_MODULE, - .name = DRIVER_NAME, - .match_table = mpc52xx_fec_match, + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + .of_match_table = mpc52xx_fec_match, + }, .probe = mpc52xx_fec_probe, .remove = mpc52xx_fec_remove, #ifdef CONFIG_PM |