aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet')
-rw-r--r--drivers/net/ethernet/Kconfig1
-rw-r--r--drivers/net/ethernet/Makefile1
-rw-r--r--drivers/net/ethernet/allwinner/Kconfig36
-rw-r--r--drivers/net/ethernet/allwinner/Makefile5
-rw-r--r--drivers/net/ethernet/allwinner/sun4i-emac.c960
-rw-r--r--drivers/net/ethernet/allwinner/sun4i-emac.h108
6 files changed, 1111 insertions, 0 deletions
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index ed956e08d38..18fd6fbeb10 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -20,6 +20,7 @@ config SUNGEM_PHY
source "drivers/net/ethernet/3com/Kconfig"
source "drivers/net/ethernet/adaptec/Kconfig"
source "drivers/net/ethernet/aeroflex/Kconfig"
+source "drivers/net/ethernet/allwinner/Kconfig"
source "drivers/net/ethernet/alteon/Kconfig"
source "drivers/net/ethernet/amd/Kconfig"
source "drivers/net/ethernet/apple/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 8268d85f944..009da27b6e2 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_NET_VENDOR_3COM) += 3com/
obj-$(CONFIG_NET_VENDOR_8390) += 8390/
obj-$(CONFIG_NET_VENDOR_ADAPTEC) += adaptec/
obj-$(CONFIG_GRETH) += aeroflex/
+obj-$(CONFIG_NET_VENDOR_ALLWINNER) += allwinner/
obj-$(CONFIG_NET_VENDOR_ALTEON) += alteon/
obj-$(CONFIG_NET_VENDOR_AMD) += amd/
obj-$(CONFIG_NET_VENDOR_APPLE) += apple/
diff --git a/drivers/net/ethernet/allwinner/Kconfig b/drivers/net/ethernet/allwinner/Kconfig
new file mode 100644
index 00000000000..66d35324f31
--- /dev/null
+++ b/drivers/net/ethernet/allwinner/Kconfig
@@ -0,0 +1,36 @@
+#
+# Allwinner device configuration
+#
+
+config NET_VENDOR_ALLWINNER
+ bool "Allwinner devices"
+ default y
+ depends on ARCH_SUNXI
+ ---help---
+ If you have a network (Ethernet) card belonging to this
+ class, say Y and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly
+ affect the kernel: saying N will just cause the configurator
+ to skip all the questions about Allwinner cards. If you say Y,
+ you will be asked for your specific card in the following
+ questions.
+
+if NET_VENDOR_ALLWINNER
+
+config SUN4I_EMAC
+ tristate "Allwinner A10 EMAC support"
+ depends on ARCH_SUNXI
+ depends on OF
+ select CRC32
+ select NET_CORE
+ select MII
+ select PHYLIB
+ ---help---
+ Support for Allwinner A10 EMAC ethernet driver.
+
+ To compile this driver as a module, choose M here. The module
+ will be called sun4i-emac.
+
+endif # NET_VENDOR_ALLWINNER
diff --git a/drivers/net/ethernet/allwinner/Makefile b/drivers/net/ethernet/allwinner/Makefile
new file mode 100644
index 00000000000..03129f79651
--- /dev/null
+++ b/drivers/net/ethernet/allwinner/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Allwinner device drivers.
+#
+
+obj-$(CONFIG_SUN4I_EMAC) += sun4i-emac.o
diff --git a/drivers/net/ethernet/allwinner/sun4i-emac.c b/drivers/net/ethernet/allwinner/sun4i-emac.c
new file mode 100644
index 00000000000..b411344e719
--- /dev/null
+++ b/drivers/net/ethernet/allwinner/sun4i-emac.c
@@ -0,0 +1,960 @@
+/*
+ * Allwinner EMAC Fast Ethernet driver for Linux.
+ *
+ * Copyright 2012-2013 Stefan Roese <sr@denx.de>
+ * Copyright 2013 Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * Based on the Linux driver provided by Allwinner:
+ * Copyright (C) 1997 Sten Wang
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/mii.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_mdio.h>
+#include <linux/of_net.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/phy.h>
+
+#include "sun4i-emac.h"
+
+#define DRV_NAME "sun4i-emac"
+#define DRV_VERSION "1.02"
+
+#define EMAC_MAX_FRAME_LEN 0x0600
+
+/* Transmit timeout, default 5 seconds. */
+static int watchdog = 5000;
+module_param(watchdog, int, 0400);
+MODULE_PARM_DESC(watchdog, "transmit timeout in milliseconds");
+
+/* EMAC register address locking.
+ *
+ * The EMAC uses an address register to control where data written
+ * to the data register goes. This means that the address register
+ * must be preserved over interrupts or similar calls.
+ *
+ * During interrupt and other critical calls, a spinlock is used to
+ * protect the system, but the calls themselves save the address
+ * in the address register in case they are interrupting another
+ * access to the device.
+ *
+ * For general accesses a lock is provided so that calls which are
+ * allowed to sleep are serialised so that the address register does
+ * not need to be saved. This lock also serves to serialise access
+ * to the EEPROM and PHY access registers which are shared between
+ * these two devices.
+ */
+
+/* The driver supports the original EMACE, and now the two newer
+ * devices, EMACA and EMACB.
+ */
+
+struct emac_board_info {
+ struct clk *clk;
+ struct device *dev;
+ struct platform_device *pdev;
+ spinlock_t lock;
+ void __iomem *membase;
+ u32 msg_enable;
+ struct net_device *ndev;
+ struct sk_buff *skb_last;
+ u16 tx_fifo_stat;
+
+ int emacrx_completed_flag;
+
+ struct phy_device *phy_dev;
+ struct device_node *phy_node;
+ unsigned int link;
+ unsigned int speed;
+ unsigned int duplex;
+
+ phy_interface_t phy_interface;
+};
+
+static void emac_update_speed(struct net_device *dev)
+{
+ struct emac_board_info *db = netdev_priv(dev);
+ unsigned int reg_val;
+
+ /* set EMAC SPEED, depend on PHY */
+ reg_val = readl(db->membase + EMAC_MAC_SUPP_REG);
+ reg_val &= ~(0x1 << 8);
+ if (db->speed == SPEED_100)
+ reg_val |= 1 << 8;
+ writel(reg_val, db->membase + EMAC_MAC_SUPP_REG);
+}
+
+static void emac_update_duplex(struct net_device *dev)
+{
+ struct emac_board_info *db = netdev_priv(dev);
+ unsigned int reg_val;
+
+ /* set duplex depend on phy */
+ reg_val = readl(db->membase + EMAC_MAC_CTL1_REG);
+ reg_val &= ~EMAC_MAC_CTL1_DUPLEX_EN;
+ if (db->duplex)
+ reg_val |= EMAC_MAC_CTL1_DUPLEX_EN;
+ writel(reg_val, db->membase + EMAC_MAC_CTL1_REG);
+}
+
+static void emac_handle_link_change(struct net_device *dev)
+{
+ struct emac_board_info *db = netdev_priv(dev);
+ struct phy_device *phydev = db->phy_dev;
+ unsigned long flags;
+ int status_change = 0;
+
+ if (phydev->link) {
+ if (db->speed != phydev->speed) {
+ spin_lock_irqsave(&db->lock, flags);
+ db->speed = phydev->speed;
+ emac_update_speed(dev);
+ spin_unlock_irqrestore(&db->lock, flags);
+ status_change = 1;
+ }
+
+ if (db->duplex != phydev->duplex) {
+ spin_lock_irqsave(&db->lock, flags);
+ db->duplex = phydev->duplex;
+ emac_update_duplex(dev);
+ spin_unlock_irqrestore(&db->lock, flags);
+ status_change = 1;
+ }
+ }
+
+ if (phydev->link != db->link) {
+ if (!phydev->link) {
+ db->speed = 0;
+ db->duplex = -1;
+ }
+ db->link = phydev->link;
+
+ status_change = 1;
+ }
+
+ if (status_change)
+ phy_print_status(phydev);
+}
+
+static int emac_mdio_probe(struct net_device *dev)
+{
+ struct emac_board_info *db = netdev_priv(dev);
+
+ /* to-do: PHY interrupts are currently not supported */
+
+ /* attach the mac to the phy */
+ db->phy_dev = of_phy_connect(db->ndev, db->phy_node,
+ &emac_handle_link_change, 0,
+ db->phy_interface);
+ if (!db->phy_dev) {
+ netdev_err(db->ndev, "could not find the PHY\n");
+ return -ENODEV;
+ }
+
+ /* mask with MAC supported features */
+ db->phy_dev->supported &= PHY_BASIC_FEATURES;
+ db->phy_dev->advertising = db->phy_dev->supported;
+
+ db->link = 0;
+ db->speed = 0;
+ db->duplex = -1;
+
+ return 0;
+}
+
+static void emac_mdio_remove(struct net_device *dev)
+{
+ struct emac_board_info *db = netdev_priv(dev);
+
+ phy_disconnect(db->phy_dev);
+ db->phy_dev = NULL;
+}
+
+static void emac_reset(struct emac_board_info *db)
+{
+ dev_dbg(db->dev, "resetting device\n");
+
+ /* RESET device */
+ writel(0, db->membase + EMAC_CTL_REG);
+ udelay(200);
+ writel(EMAC_CTL_RESET, db->membase + EMAC_CTL_REG);
+ udelay(200);
+}
+
+static void emac_outblk_32bit(void __iomem *reg, void *data, int count)
+{
+ writesl(reg, data, round_up(count, 4) / 4);
+}
+
+static void emac_inblk_32bit(void __iomem *reg, void *data, int count)
+{
+ readsl(reg, data, round_up(count, 4) / 4);
+}
+
+static int emac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct emac_board_info *dm = netdev_priv(dev);
+ struct phy_device *phydev = dm->phy_dev;
+
+ if (!netif_running(dev))
+ return -EINVAL;
+
+ if (!phydev)
+ return -ENODEV;
+
+ return phy_mii_ioctl(phydev, rq, cmd);
+}
+
+/* ethtool ops */
+static void emac_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ strlcpy(info->driver, DRV_NAME, sizeof(DRV_NAME));
+ strlcpy(info->version, DRV_VERSION, sizeof(DRV_VERSION));
+ strlcpy(info->bus_info, dev_name(&dev->dev), sizeof(info->bus_info));
+}
+
+static int emac_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct emac_board_info *dm = netdev_priv(dev);
+ struct phy_device *phydev = dm->phy_dev;
+
+ if (!phydev)
+ return -ENODEV;
+
+ return phy_ethtool_gset(phydev, cmd);
+}
+
+static int emac_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct emac_board_info *dm = netdev_priv(dev);
+ struct phy_device *phydev = dm->phy_dev;
+
+ if (!phydev)
+ return -ENODEV;
+
+ return phy_ethtool_sset(phydev, cmd);
+}
+
+static const struct ethtool_ops emac_ethtool_ops = {
+ .get_drvinfo = emac_get_drvinfo,
+ .get_settings = emac_get_settings,
+ .set_settings = emac_set_settings,
+ .get_link = ethtool_op_get_link,
+};
+
+unsigned int emac_setup(struct net_device *ndev)
+{
+ struct emac_board_info *db = netdev_priv(ndev);
+ unsigned int reg_val;
+
+ /* set up TX */
+ reg_val = readl(db->membase + EMAC_TX_MODE_REG);
+
+ writel(reg_val | EMAC_TX_MODE_ABORTED_FRAME_EN,
+ db->membase + EMAC_TX_MODE_REG);
+
+ /* set up RX */
+ reg_val = readl(db->membase + EMAC_RX_CTL_REG);
+
+ writel(reg_val | EMAC_RX_CTL_PASS_LEN_OOR_EN |
+ EMAC_RX_CTL_ACCEPT_UNICAST_EN | EMAC_RX_CTL_DA_FILTER_EN |
+ EMAC_RX_CTL_ACCEPT_MULTICAST_EN |
+ EMAC_RX_CTL_ACCEPT_BROADCAST_EN,
+ db->membase + EMAC_RX_CTL_REG);
+
+ /* set MAC */
+ /* set MAC CTL0 */
+ reg_val = readl(db->membase + EMAC_MAC_CTL0_REG);
+ writel(reg_val | EMAC_MAC_CTL0_RX_FLOW_CTL_EN |
+ EMAC_MAC_CTL0_TX_FLOW_CTL_EN,
+ db->membase + EMAC_MAC_CTL0_REG);
+
+ /* set MAC CTL1 */
+ reg_val = readl(db->membase + EMAC_MAC_CTL1_REG);
+ reg_val |= EMAC_MAC_CTL1_LEN_CHECK_EN;
+ reg_val |= EMAC_MAC_CTL1_CRC_EN;
+ reg_val |= EMAC_MAC_CTL1_PAD_EN;
+ writel(reg_val, db->membase + EMAC_MAC_CTL1_REG);
+
+ /* set up IPGT */
+ writel(EMAC_MAC_IPGT_FULL_DUPLEX, db->membase + EMAC_MAC_IPGT_REG);
+
+ /* set up IPGR */
+ writel((EMAC_MAC_IPGR_IPG1 << 8) | EMAC_MAC_IPGR_IPG2,
+ db->membase + EMAC_MAC_IPGR_REG);
+
+ /* set up Collison window */
+ writel((EMAC_MAC_CLRT_COLLISION_WINDOW << 8) | EMAC_MAC_CLRT_RM,
+ db->membase + EMAC_MAC_CLRT_REG);
+
+ /* set up Max Frame Length */
+ writel(EMAC_MAX_FRAME_LEN,
+ db->membase + EMAC_MAC_MAXF_REG);
+
+ return 0;
+}
+
+unsigned int emac_powerup(struct net_device *ndev)
+{
+ struct emac_board_info *db = netdev_priv(ndev);
+ unsigned int reg_val;
+
+ /* initial EMAC */
+ /* flush RX FIFO */
+ reg_val = readl(db->membase + EMAC_RX_CTL_REG);
+ reg_val |= 0x8;
+ writel(reg_val, db->membase + EMAC_RX_CTL_REG);
+ udelay(1);
+
+ /* initial MAC */
+ /* soft reset MAC */
+ reg_val = readl(db->membase + EMAC_MAC_CTL0_REG);
+ reg_val &= ~EMAC_MAC_CTL0_SOFT_RESET;
+ writel(reg_val, db->membase + EMAC_MAC_CTL0_REG);
+
+ /* set MII clock */
+ reg_val = readl(db->membase + EMAC_MAC_MCFG_REG);
+ reg_val &= (~(0xf << 2));
+ reg_val |= (0xD << 2);
+ writel(reg_val, db->membase + EMAC_MAC_MCFG_REG);
+
+ /* clear RX counter */
+ writel(0x0, db->membase + EMAC_RX_FBC_REG);
+
+ /* disable all interrupt and clear interrupt status */
+ writel(0, db->membase + EMAC_INT_CTL_REG);
+ reg_val = readl(db->membase + EMAC_INT_STA_REG);
+ writel(reg_val, db->membase + EMAC_INT_STA_REG);
+
+ udelay(1);
+
+ /* set up EMAC */
+ emac_setup(ndev);
+
+ /* set mac_address to chip */
+ writel(ndev->dev_addr[0] << 16 | ndev->dev_addr[1] << 8 | ndev->
+ dev_addr[2], db->membase + EMAC_MAC_A1_REG);
+ writel(ndev->dev_addr[3] << 16 | ndev->dev_addr[4] << 8 | ndev->
+ dev_addr[5], db->membase + EMAC_MAC_A0_REG);
+
+ mdelay(1);
+
+ return 0;
+}
+
+static int emac_set_mac_address(struct net_device *dev, void *p)
+{
+ struct sockaddr *addr = p;
+ struct emac_board_info *db = netdev_priv(dev);
+
+ if (netif_running(dev))
+ return -EBUSY;
+
+ memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
+
+ writel(dev->dev_addr[0] << 16 | dev->dev_addr[1] << 8 | dev->
+ dev_addr[2], db->membase + EMAC_MAC_A1_REG);
+ writel(dev->dev_addr[3] << 16 | dev->dev_addr[4] << 8 | dev->
+ dev_addr[5], db->membase + EMAC_MAC_A0_REG);
+
+ return 0;
+}
+
+/* Initialize emac board */
+static void emac_init_device(struct net_device *dev)
+{
+ struct emac_board_info *db = netdev_priv(dev);
+ unsigned long flags;
+ unsigned int reg_val;
+
+ spin_lock_irqsave(&db->lock, flags);
+
+ emac_update_speed(dev);
+ emac_update_duplex(dev);
+
+ /* enable RX/TX */
+ reg_val = readl(db->membase + EMAC_CTL_REG);
+ writel(reg_val | EMAC_CTL_RESET | EMAC_CTL_TX_EN | EMAC_CTL_RX_EN,
+ db->membase + EMAC_CTL_REG);
+
+ /* enable RX/TX0/RX Hlevel interrup */
+ reg_val = readl(db->membase + EMAC_INT_CTL_REG);
+ reg_val |= (0xf << 0) | (0x01 << 8);
+ writel(reg_val, db->membase + EMAC_INT_CTL_REG);
+
+ spin_unlock_irqrestore(&db->lock, flags);
+}
+
+/* Our watchdog timed out. Called by the networking layer */
+static void emac_timeout(struct net_device *dev)
+{
+ struct emac_board_info *db = netdev_priv(dev);
+ unsigned long flags;
+
+ if (netif_msg_timer(db))
+ dev_err(db->dev, "tx time out.\n");
+
+ /* Save previous register address */
+ spin_lock_irqsave(&db->lock, flags);
+
+ netif_stop_queue(dev);
+ emac_reset(db);
+ emac_init_device(dev);
+ /* We can accept TX packets again */
+ dev->trans_start = jiffies;
+ netif_wake_queue(dev);
+
+ /* Restore previous register address */
+ spin_unlock_irqrestore(&db->lock, flags);
+}
+
+/* Hardware start transmission.
+ * Send a packet to media from the upper layer.
+ */
+static int emac_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct emac_board_info *db = netdev_priv(dev);
+ unsigned long channel;
+ unsigned long flags;
+
+ channel = db->tx_fifo_stat & 3;
+ if (channel == 3)
+ return 1;
+
+ channel = (channel == 1 ? 1 : 0);
+
+ spin_lock_irqsave(&db->lock, flags);
+
+ writel(channel, db->membase + EMAC_TX_INS_REG);
+
+ emac_outblk_32bit(db->membase + EMAC_TX_IO_DATA_REG,
+ skb->data, skb->len);
+ dev->stats.tx_bytes += skb->len;
+
+ db->tx_fifo_stat |= 1 << channel;
+ /* TX control: First packet immediately send, second packet queue */
+ if (channel == 0) {
+ /* set TX len */
+ writel(skb->len, db->membase + EMAC_TX_PL0_REG);
+ /* start translate from fifo to phy */
+ writel(readl(db->membase + EMAC_TX_CTL0_REG) | 1,
+ db->membase + EMAC_TX_CTL0_REG);
+
+ /* save the time stamp */
+ dev->trans_start = jiffies;
+ } else if (channel == 1) {
+ /* set TX len */
+ writel(skb->len, db->membase + EMAC_TX_PL1_REG);
+ /* start translate from fifo to phy */
+ writel(readl(db->membase + EMAC_TX_CTL1_REG) | 1,
+ db->membase + EMAC_TX_CTL1_REG);
+
+ /* save the time stamp */
+ dev->trans_start = jiffies;
+ }
+
+ if ((db->tx_fifo_stat & 3) == 3) {
+ /* Second packet */
+ netif_stop_queue(dev);
+ }
+
+ spin_unlock_irqrestore(&db->lock, flags);
+
+ /* free this SKB */
+ dev_kfree_skb(skb);
+
+ return NETDEV_TX_OK;
+}
+
+/* EMAC interrupt handler
+ * receive the packet to upper layer, free the transmitted packet
+ */
+static void emac_tx_done(struct net_device *dev, struct emac_board_info *db,
+ unsigned int tx_status)
+{
+ /* One packet sent complete */
+ db->tx_fifo_stat &= ~(tx_status & 3);
+ if (3 == (tx_status & 3))
+ dev->stats.tx_packets += 2;
+ else
+ dev->stats.tx_packets++;
+
+ if (netif_msg_tx_done(db))
+ dev_dbg(db->dev, "tx done, NSR %02x\n", tx_status);
+
+ netif_wake_queue(dev);
+}
+
+/* Received a packet and pass to upper layer
+ */
+static void emac_rx(struct net_device *dev)
+{
+ struct emac_board_info *db = netdev_priv(dev);
+ struct sk_buff *skb;
+ u8 *rdptr;
+ bool good_packet;
+ static int rxlen_last;
+ unsigned int reg_val;
+ u32 rxhdr, rxstatus, rxcount, rxlen;
+
+ /* Check packet ready or not */
+ while (1) {
+ /* race warning: the first packet might arrive with
+ * the interrupts disabled, but the second will fix
+ * it
+ */
+ rxcount = readl(db->membase + EMAC_RX_FBC_REG);
+
+ if (netif_msg_rx_status(db))
+ dev_dbg(db->dev, "RXCount: %x\n", rxcount);
+
+ if ((db->skb_last != NULL) && (rxlen_last > 0)) {
+ dev->stats.rx_bytes += rxlen_last;
+
+ /* Pass to upper layer */
+ db->skb_last->protocol = eth_type_trans(db->skb_last,
+ dev);
+ netif_rx(db->skb_last);
+ dev->stats.rx_packets++;
+ db->skb_last = NULL;
+ rxlen_last = 0;
+
+ reg_val = readl(db->membase + EMAC_RX_CTL_REG);
+ reg_val &= ~EMAC_RX_CTL_DMA_EN;
+ writel(reg_val, db->membase + EMAC_RX_CTL_REG);
+ }
+
+ if (!rxcount) {
+ db->emacrx_completed_flag = 1;
+ reg_val = readl(db->membase + EMAC_INT_CTL_REG);
+ reg_val |= (0xf << 0) | (0x01 << 8);
+ writel(reg_val, db->membase + EMAC_INT_CTL_REG);
+
+ /* had one stuck? */
+ rxcount = readl(db->membase + EMAC_RX_FBC_REG);
+ if (!rxcount)
+ return;
+ }
+
+ reg_val = readl(db->membase + EMAC_RX_IO_DATA_REG);
+ if (netif_msg_rx_status(db))
+ dev_dbg(db->dev, "receive header: %x\n", reg_val);
+ if (reg_val != EMAC_UNDOCUMENTED_MAGIC) {
+ /* disable RX */
+ reg_val = readl(db->membase + EMAC_CTL_REG);
+ writel(reg_val & ~EMAC_CTL_RX_EN,
+ db->membase + EMAC_CTL_REG);
+
+ /* Flush RX FIFO */
+ reg_val = readl(db->membase + EMAC_RX_CTL_REG);
+ writel(reg_val | (1 << 3),
+ db->membase + EMAC_RX_CTL_REG);
+
+ do {
+ reg_val = readl(db->membase + EMAC_RX_CTL_REG);
+ } while (reg_val & (1 << 3));
+
+ /* enable RX */
+ reg_val = readl(db->membase + EMAC_CTL_REG);
+ writel(reg_val | EMAC_CTL_RX_EN,
+ db->membase + EMAC_CTL_REG);
+ reg_val = readl(db->membase + EMAC_INT_CTL_REG);
+ reg_val |= (0xf << 0) | (0x01 << 8);
+ writel(reg_val, db->membase + EMAC_INT_CTL_REG);
+
+ db->emacrx_completed_flag = 1;
+
+ return;
+ }
+
+ /* A packet ready now & Get status/length */
+ good_packet = true;
+
+ emac_inblk_32bit(db->membase + EMAC_RX_IO_DATA_REG,
+ &rxhdr, sizeof(rxhdr));
+
+ if (netif_msg_rx_status(db))
+ dev_dbg(db->dev, "rxhdr: %x\n", *((int *)(&rxhdr)));
+
+ rxlen = EMAC_RX_IO_DATA_LEN(rxhdr);
+ rxstatus = EMAC_RX_IO_DATA_STATUS(rxhdr);
+
+ if (netif_msg_rx_status(db))
+ dev_dbg(db->dev, "RX: status %02x, length %04x\n",
+ rxstatus, rxlen);
+
+ /* Packet Status check */
+ if (rxlen < 0x40) {
+ good_packet = false;
+ if (netif_msg_rx_err(db))
+ dev_dbg(db->dev, "RX: Bad Packet (runt)\n");
+ }
+
+ if (unlikely(!(rxstatus & EMAC_RX_IO_DATA_STATUS_OK))) {
+ good_packet = false;
+
+ if (rxstatus & EMAC_RX_IO_DATA_STATUS_CRC_ERR) {
+ if (netif_msg_rx_err(db))
+ dev_dbg(db->dev, "crc error\n");
+ dev->stats.rx_crc_errors++;
+ }
+
+ if (rxstatus & EMAC_RX_IO_DATA_STATUS_LEN_ERR) {
+ if (netif_msg_rx_err(db))
+ dev_dbg(db->dev, "length error\n");
+ dev->stats.rx_length_errors++;
+ }
+ }
+
+ /* Move data from EMAC */
+ skb = dev_alloc_skb(rxlen + 4);
+ if (good_packet && skb) {
+ skb_reserve(skb, 2);
+ rdptr = (u8 *) skb_put(skb, rxlen - 4);
+
+ /* Read received packet from RX SRAM */
+ if (netif_msg_rx_status(db))
+ dev_dbg(db->dev, "RxLen %x\n", rxlen);
+
+ emac_inblk_32bit(db->membase + EMAC_RX_IO_DATA_REG,
+ rdptr, rxlen);
+ dev->stats.rx_bytes += rxlen;
+
+ /* Pass to upper layer */
+ skb->protocol = eth_type_trans(skb, dev);
+ netif_rx(skb);
+ dev->stats.rx_packets++;
+ }
+ }
+}
+
+static irqreturn_t emac_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = dev_id;
+ struct emac_board_info *db = netdev_priv(dev);
+ int int_status;
+ unsigned long flags;
+ unsigned int reg_val;
+
+ /* A real interrupt coming */
+
+ /* holders of db->lock must always block IRQs */
+ spin_lock_irqsave(&db->lock, flags);
+
+ /* Disable all interrupts */
+ writel(0, db->membase + EMAC_INT_CTL_REG);
+
+ /* Got EMAC interrupt status */
+ /* Got ISR */
+ int_status = readl(db->membase + EMAC_INT_STA_REG);
+ /* Clear ISR status */
+ writel(int_status, db->membase + EMAC_INT_STA_REG);
+
+ if (netif_msg_intr(db))
+ dev_dbg(db->dev, "emac interrupt %02x\n", int_status);
+
+ /* Received the coming packet */
+ if ((int_status & 0x100) && (db->emacrx_completed_flag == 1)) {
+ /* carrier lost */
+ db->emacrx_completed_flag = 0;
+ emac_rx(dev);
+ }
+
+ /* Transmit Interrupt check */
+ if (int_status & (0x01 | 0x02))
+ emac_tx_done(dev, db, int_status);
+
+ if (int_status & (0x04 | 0x08))
+ netdev_info(dev, " ab : %x\n", int_status);
+
+ /* Re-enable interrupt mask */
+ if (db->emacrx_completed_flag == 1) {
+ reg_val = readl(db->membase + EMAC_INT_CTL_REG);
+ reg_val |= (0xf << 0) | (0x01 << 8);
+ writel(reg_val, db->membase + EMAC_INT_CTL_REG);
+ }
+ spin_unlock_irqrestore(&db->lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Used by netconsole
+ */
+static void emac_poll_controller(struct net_device *dev)
+{
+ disable_irq(dev->irq);
+ emac_interrupt(dev->irq, dev);
+ enable_irq(dev->irq);
+}
+#endif
+
+/* Open the interface.
+ * The interface is opened whenever "ifconfig" actives it.
+ */
+static int emac_open(struct net_device *dev)
+{
+ struct emac_board_info *db = netdev_priv(dev);
+ int ret;
+
+ if (netif_msg_ifup(db))
+ dev_dbg(db->dev, "enabling %s\n", dev->name);
+
+ if (devm_request_irq(db->dev, dev->irq, &emac_interrupt,
+ 0, dev->name, dev))
+ return -EAGAIN;
+
+ /* Initialize EMAC board */
+ emac_reset(db);
+ emac_init_device(dev);
+
+ ret = emac_mdio_probe(dev);
+ if (ret < 0) {
+ netdev_err(dev, "cannot probe MDIO bus\n");
+ return ret;
+ }
+
+ phy_start(db->phy_dev);
+ netif_start_queue(dev);
+
+ return 0;
+}
+
+static void emac_shutdown(struct net_device *dev)
+{
+ unsigned int reg_val;
+ struct emac_board_info *db = netdev_priv(dev);
+
+ /* Disable all interrupt */
+ writel(0, db->membase + EMAC_INT_CTL_REG);
+
+ /* clear interupt status */
+ reg_val = readl(db->membase + EMAC_INT_STA_REG);
+ writel(reg_val, db->membase + EMAC_INT_STA_REG);
+
+ /* Disable RX/TX */
+ reg_val = readl(db->membase + EMAC_CTL_REG);
+ reg_val &= ~(EMAC_CTL_TX_EN | EMAC_CTL_RX_EN | EMAC_CTL_RESET);
+ writel(reg_val, db->membase + EMAC_CTL_REG);
+}
+
+/* Stop the interface.
+ * The interface is stopped when it is brought.
+ */
+static int emac_stop(struct net_device *ndev)
+{
+ struct emac_board_info *db = netdev_priv(ndev);
+
+ if (netif_msg_ifdown(db))
+ dev_dbg(db->dev, "shutting down %s\n", ndev->name);
+
+ netif_stop_queue(ndev);
+ netif_carrier_off(ndev);
+
+ phy_stop(db->phy_dev);
+
+ emac_mdio_remove(ndev);
+
+ emac_shutdown(ndev);
+
+ return 0;
+}
+
+static const struct net_device_ops emac_netdev_ops = {
+ .ndo_open = emac_open,
+ .ndo_stop = emac_stop,
+ .ndo_start_xmit = emac_start_xmit,
+ .ndo_tx_timeout = emac_timeout,
+ .ndo_do_ioctl = emac_ioctl,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = emac_set_mac_address,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = emac_poll_controller,
+#endif
+};
+
+/* Search EMAC board, allocate space and register it
+ */
+static int emac_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct emac_board_info *db;
+ struct net_device *ndev;
+ int ret = 0;
+ const char *mac_addr;
+
+ ndev = alloc_etherdev(sizeof(struct emac_board_info));
+ if (!ndev) {
+ dev_err(&pdev->dev, "could not allocate device.\n");
+ return -ENOMEM;
+ }
+
+ SET_NETDEV_DEV(ndev, &pdev->dev);
+
+ db = netdev_priv(ndev);
+ memset(db, 0, sizeof(*db));
+
+ db->dev = &pdev->dev;
+ db->ndev = ndev;
+ db->pdev = pdev;
+
+ spin_lock_init(&db->lock);
+
+ db->membase = of_iomap(np, 0);
+ if (!db->membase) {
+ dev_err(&pdev->dev, "failed to remap registers\n");
+ return -ENOMEM;
+ goto out;
+ }
+
+ /* fill in parameters for net-dev structure */
+ ndev->base_addr = (unsigned long)db->membase;
+ ndev->irq = irq_of_parse_and_map(np, 0);
+ if (ndev->irq == -ENXIO) {
+ netdev_err(ndev, "No irq resource\n");
+ ret = ndev->irq;
+ goto out;
+ }
+
+ db->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(db->clk))
+ goto out;
+
+ clk_prepare_enable(db->clk);
+
+ db->phy_node = of_parse_phandle(np, "phy", 0);
+ if (!db->phy_node) {
+ dev_err(&pdev->dev, "no associated PHY\n");
+ ret = -ENODEV;
+ goto out;
+ }
+
+ /* Read MAC-address from DT */
+ mac_addr = of_get_mac_address(np);
+ if (mac_addr)
+ memcpy(ndev->dev_addr, mac_addr, ETH_ALEN);
+
+ /* Check if the MAC address is valid, if not get a random one */
+ if (!is_valid_ether_addr(ndev->dev_addr)) {
+ eth_hw_addr_random(ndev);
+ dev_warn(&pdev->dev, "using random MAC address %pM\n",
+ ndev->dev_addr);
+ }
+
+ db->emacrx_completed_flag = 1;
+ emac_powerup(ndev);
+ emac_reset(db);
+
+ ether_setup(ndev);
+
+ ndev->netdev_ops = &emac_netdev_ops;
+ ndev->watchdog_timeo = msecs_to_jiffies(watchdog);
+ ndev->ethtool_ops = &emac_ethtool_ops;
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ ndev->poll_controller = &emac_poll_controller;
+#endif
+
+ platform_set_drvdata(pdev, ndev);
+
+ /* Carrier starts down, phylib will bring it up */
+ netif_carrier_off(ndev);
+
+ ret = register_netdev(ndev);
+ if (ret) {
+ dev_err(&pdev->dev, "Registering netdev failed!\n");
+ ret = -ENODEV;
+ goto out;
+ }
+
+ dev_info(&pdev->dev, "%s: at %p, IRQ %d MAC: %pM\n",
+ ndev->name, db->membase, ndev->irq, ndev->dev_addr);
+
+ return 0;
+
+out:
+ dev_err(db->dev, "not found (%d).\n", ret);
+
+ free_netdev(ndev);
+
+ return ret;
+}
+
+static int emac_remove(struct platform_device *pdev)
+{
+ struct net_device *ndev = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+
+ unregister_netdev(ndev);
+ free_netdev(ndev);
+
+ dev_dbg(&pdev->dev, "released and freed device\n");
+ return 0;
+}
+
+static int emac_suspend(struct platform_device *dev, pm_message_t state)
+{
+ struct net_device *ndev = platform_get_drvdata(dev);
+
+ netif_carrier_off(ndev);
+ netif_device_detach(ndev);
+ emac_shutdown(ndev);
+
+ return 0;
+}
+
+static int emac_resume(struct platform_device *dev)
+{
+ struct net_device *ndev = platform_get_drvdata(dev);
+ struct emac_board_info *db = netdev_priv(ndev);
+
+ emac_reset(db);
+ emac_init_device(ndev);
+ netif_device_attach(ndev);
+
+ return 0;
+}
+
+static const struct of_device_id emac_of_match[] = {
+ {.compatible = "allwinner,sun4i-emac",},
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, emac_of_match);
+
+static struct platform_driver emac_driver = {
+ .driver = {
+ .name = "sun4i-emac",
+ .of_match_table = emac_of_match,
+ },
+ .probe = emac_probe,
+ .remove = emac_remove,
+ .suspend = emac_suspend,
+ .resume = emac_resume,
+};
+
+module_platform_driver(emac_driver);
+
+MODULE_AUTHOR("Stefan Roese <sr@denx.de>");
+MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
+MODULE_DESCRIPTION("Allwinner A10 emac network driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/ethernet/allwinner/sun4i-emac.h b/drivers/net/ethernet/allwinner/sun4i-emac.h
new file mode 100644
index 00000000000..38c72d9ec60
--- /dev/null
+++ b/drivers/net/ethernet/allwinner/sun4i-emac.h
@@ -0,0 +1,108 @@
+/*
+ * Allwinner EMAC Fast Ethernet driver for Linux.
+ *
+ * Copyright 2012 Stefan Roese <sr@denx.de>
+ * Copyright 2013 Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * Based on the Linux driver provided by Allwinner:
+ * Copyright (C) 1997 Sten Wang
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef _SUN4I_EMAC_H_
+#define _SUN4I_EMAC_H_
+
+#define EMAC_CTL_REG (0x00)
+#define EMAC_CTL_RESET (1 << 0)
+#define EMAC_CTL_TX_EN (1 << 1)
+#define EMAC_CTL_RX_EN (1 << 2)
+#define EMAC_TX_MODE_REG (0x04)
+#define EMAC_TX_MODE_ABORTED_FRAME_EN (1 << 0)
+#define EMAC_TX_MODE_DMA_EN (1 << 1)
+#define EMAC_TX_FLOW_REG (0x08)
+#define EMAC_TX_CTL0_REG (0x0c)
+#define EMAC_TX_CTL1_REG (0x10)
+#define EMAC_TX_INS_REG (0x14)
+#define EMAC_TX_PL0_REG (0x18)
+#define EMAC_TX_PL1_REG (0x1c)
+#define EMAC_TX_STA_REG (0x20)
+#define EMAC_TX_IO_DATA_REG (0x24)
+#define EMAC_TX_IO_DATA1_REG (0x28)
+#define EMAC_TX_TSVL0_REG (0x2c)
+#define EMAC_TX_TSVH0_REG (0x30)
+#define EMAC_TX_TSVL1_REG (0x34)
+#define EMAC_TX_TSVH1_REG (0x38)
+#define EMAC_RX_CTL_REG (0x3c)
+#define EMAC_RX_CTL_AUTO_DRQ_EN (1 << 1)
+#define EMAC_RX_CTL_DMA_EN (1 << 2)
+#define EMAC_RX_CTL_PASS_ALL_EN (1 << 4)
+#define EMAC_RX_CTL_PASS_CTL_EN (1 << 5)
+#define EMAC_RX_CTL_PASS_CRC_ERR_EN (1 << 6)
+#define EMAC_RX_CTL_PASS_LEN_ERR_EN (1 << 7)
+#define EMAC_RX_CTL_PASS_LEN_OOR_EN (1 << 8)
+#define EMAC_RX_CTL_ACCEPT_UNICAST_EN (1 << 16)
+#define EMAC_RX_CTL_DA_FILTER_EN (1 << 17)
+#define EMAC_RX_CTL_ACCEPT_MULTICAST_EN (1 << 20)
+#define EMAC_RX_CTL_HASH_FILTER_EN (1 << 21)
+#define EMAC_RX_CTL_ACCEPT_BROADCAST_EN (1 << 22)
+#define EMAC_RX_CTL_SA_FILTER_EN (1 << 24)
+#define EMAC_RX_CTL_SA_FILTER_INVERT_EN (1 << 25)
+#define EMAC_RX_HASH0_REG (0x40)
+#define EMAC_RX_HASH1_REG (0x44)
+#define EMAC_RX_STA_REG (0x48)
+#define EMAC_RX_IO_DATA_REG (0x4c)
+#define EMAC_RX_IO_DATA_LEN(x) (x & 0xffff)
+#define EMAC_RX_IO_DATA_STATUS(x) ((x >> 16) & 0xffff)
+#define EMAC_RX_IO_DATA_STATUS_CRC_ERR (1 << 4)
+#define EMAC_RX_IO_DATA_STATUS_LEN_ERR (3 << 5)
+#define EMAC_RX_IO_DATA_STATUS_OK (1 << 7)
+#define EMAC_RX_FBC_REG (0x50)
+#define EMAC_INT_CTL_REG (0x54)
+#define EMAC_INT_STA_REG (0x58)
+#define EMAC_MAC_CTL0_REG (0x5c)
+#define EMAC_MAC_CTL0_RX_FLOW_CTL_EN (1 << 2)
+#define EMAC_MAC_CTL0_TX_FLOW_CTL_EN (1 << 3)
+#define EMAC_MAC_CTL0_SOFT_RESET (1 << 15)
+#define EMAC_MAC_CTL1_REG (0x60)
+#define EMAC_MAC_CTL1_DUPLEX_EN (1 << 0)
+#define EMAC_MAC_CTL1_LEN_CHECK_EN (1 << 1)
+#define EMAC_MAC_CTL1_HUGE_FRAME_EN (1 << 2)
+#define EMAC_MAC_CTL1_DELAYED_CRC_EN (1 << 3)
+#define EMAC_MAC_CTL1_CRC_EN (1 << 4)
+#define EMAC_MAC_CTL1_PAD_EN (1 << 5)
+#define EMAC_MAC_CTL1_PAD_CRC_EN (1 << 6)
+#define EMAC_MAC_CTL1_AD_SHORT_FRAME_EN (1 << 7)
+#define EMAC_MAC_CTL1_BACKOFF_DIS (1 << 12)
+#define EMAC_MAC_IPGT_REG (0x64)
+#define EMAC_MAC_IPGT_HALF_DUPLEX (0x12)
+#define EMAC_MAC_IPGT_FULL_DUPLEX (0x15)
+#define EMAC_MAC_IPGR_REG (0x68)
+#define EMAC_MAC_IPGR_IPG1 (0x0c)
+#define EMAC_MAC_IPGR_IPG2 (0x12)
+#define EMAC_MAC_CLRT_REG (0x6c)
+#define EMAC_MAC_CLRT_COLLISION_WINDOW (0x37)
+#define EMAC_MAC_CLRT_RM (0x0f)
+#define EMAC_MAC_MAXF_REG (0x70)
+#define EMAC_MAC_SUPP_REG (0x74)
+#define EMAC_MAC_TEST_REG (0x78)
+#define EMAC_MAC_MCFG_REG (0x7c)
+#define EMAC_MAC_A0_REG (0x98)
+#define EMAC_MAC_A1_REG (0x9c)
+#define EMAC_MAC_A2_REG (0xa0)
+#define EMAC_SAFX_L_REG0 (0xa4)
+#define EMAC_SAFX_H_REG0 (0xa8)
+#define EMAC_SAFX_L_REG1 (0xac)
+#define EMAC_SAFX_H_REG1 (0xb0)
+#define EMAC_SAFX_L_REG2 (0xb4)
+#define EMAC_SAFX_H_REG2 (0xb8)
+#define EMAC_SAFX_L_REG3 (0xbc)
+#define EMAC_SAFX_H_REG3 (0xc0)
+
+#define EMAC_PHY_DUPLEX (1 << 8)
+
+#define EMAC_EEPROM_MAGIC (0x444d394b)
+#define EMAC_UNDOCUMENTED_MAGIC (0x0143414d)
+#endif /* _SUN4I_EMAC_H_ */
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-22 17:09:11 +0000