diff options
Diffstat (limited to 'drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.c')
| -rw-r--r-- | drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.c | 212 |
1 files changed, 212 insertions, 0 deletions
diff --git a/drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.c b/drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.c new file mode 100644 index 00000000000..f5ffd7e05d2 --- /dev/null +++ b/drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.c @@ -0,0 +1,212 @@ +/* + * Generic library functions for the MSF (Media and Switch Fabric) unit + * found on the Intel IXP2400 network processor. + * + * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org> + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as + * published by the Free Software Foundation; either version 2.1 of the + * License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <mach/hardware.h> +#include <mach/ixp2000-regs.h> +#include <asm/delay.h> +#include <asm/io.h> +#include "ixp2400-msf.h" + +/* + * This is the Intel recommended PLL init procedure as described on + * page 340 of the IXP2400/IXP2800 Programmer's Reference Manual. + */ +static void ixp2400_pll_init(struct ixp2400_msf_parameters *mp) +{ + int rx_dual_clock; + int tx_dual_clock; + u32 value; + + /* + * If the RX mode is not 1x32, we have to enable both RX PLLs + * (#0 and #1.) The same thing for the TX direction. + */ + rx_dual_clock = !!(mp->rx_mode & IXP2400_RX_MODE_WIDTH_MASK); + tx_dual_clock = !!(mp->tx_mode & IXP2400_TX_MODE_WIDTH_MASK); + + /* + * Read initial value. + */ + value = ixp2000_reg_read(IXP2000_MSF_CLK_CNTRL); + + /* + * Put PLLs in powerdown and bypass mode. + */ + value |= 0x0000f0f0; + ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value); + + /* + * Set single or dual clock mode bits. + */ + value &= ~0x03000000; + value |= (rx_dual_clock << 24) | (tx_dual_clock << 25); + + /* + * Set multipliers. + */ + value &= ~0x00ff0000; + value |= mp->rxclk01_multiplier << 16; + value |= mp->rxclk23_multiplier << 18; + value |= mp->txclk01_multiplier << 20; + value |= mp->txclk23_multiplier << 22; + + /* + * And write value. + */ + ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value); + + /* + * Disable PLL bypass mode. + */ + value &= ~(0x00005000 | rx_dual_clock << 13 | tx_dual_clock << 15); + ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value); + + /* + * Turn on PLLs. + */ + value &= ~(0x00000050 | rx_dual_clock << 5 | tx_dual_clock << 7); + ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value); + + /* + * Wait for PLLs to lock. There are lock status bits, but IXP2400 + * erratum #65 says that these lock bits should not be relied upon + * as they might not accurately reflect the true state of the PLLs. + */ + udelay(100); +} + +/* + * Needed according to p480 of Programmer's Reference Manual. + */ +static void ixp2400_msf_free_rbuf_entries(struct ixp2400_msf_parameters *mp) +{ + int size_bits; + int i; + + /* + * Work around IXP2400 erratum #69 (silent RBUF-to-DRAM transfer + * corruption) in the Intel-recommended way: do not add the RBUF + * elements susceptible to corruption to the freelist. + */ + size_bits = mp->rx_mode & IXP2400_RX_MODE_RBUF_SIZE_MASK; + if (size_bits == IXP2400_RX_MODE_RBUF_SIZE_64) { + for (i = 1; i < 128; i++) { + if (i == 9 || i == 18 || i == 27) + continue; + ixp2000_reg_write(IXP2000_MSF_RBUF_ELEMENT_DONE, i); + } + } else if (size_bits == IXP2400_RX_MODE_RBUF_SIZE_128) { + for (i = 1; i < 64; i++) { + if (i == 4 || i == 9 || i == 13) + continue; + ixp2000_reg_write(IXP2000_MSF_RBUF_ELEMENT_DONE, i); + } + } else if (size_bits == IXP2400_RX_MODE_RBUF_SIZE_256) { + for (i = 1; i < 32; i++) { + if (i == 2 || i == 4 || i == 6) + continue; + ixp2000_reg_write(IXP2000_MSF_RBUF_ELEMENT_DONE, i); + } + } +} + +static u32 ixp2400_msf_valid_channels(u32 reg) +{ + u32 channels; + + channels = 0; + switch (reg & IXP2400_RX_MODE_WIDTH_MASK) { + case IXP2400_RX_MODE_1x32: + channels = 0x1; + if (reg & IXP2400_RX_MODE_MPHY && + !(reg & IXP2400_RX_MODE_MPHY_32)) + channels = 0xf; + break; + + case IXP2400_RX_MODE_2x16: + channels = 0x5; + break; + + case IXP2400_RX_MODE_4x8: + channels = 0xf; + break; + + case IXP2400_RX_MODE_1x16_2x8: + channels = 0xd; + break; + } + + return channels; +} + +static void ixp2400_msf_enable_rx(struct ixp2400_msf_parameters *mp) +{ + u32 value; + + value = ixp2000_reg_read(IXP2000_MSF_RX_CONTROL) & 0x0fffffff; + value |= ixp2400_msf_valid_channels(mp->rx_mode) << 28; + ixp2000_reg_write(IXP2000_MSF_RX_CONTROL, value); +} + +static void ixp2400_msf_enable_tx(struct ixp2400_msf_parameters *mp) +{ + u32 value; + + value = ixp2000_reg_read(IXP2000_MSF_TX_CONTROL) & 0x0fffffff; + value |= ixp2400_msf_valid_channels(mp->tx_mode) << 28; + ixp2000_reg_write(IXP2000_MSF_TX_CONTROL, value); +} + + +void ixp2400_msf_init(struct ixp2400_msf_parameters *mp) +{ + u32 value; + int i; + + /* + * Init the RX/TX PLLs based on the passed parameter block. + */ + ixp2400_pll_init(mp); + + /* + * Reset MSF. Bit 7 in IXP_RESET_0 resets the MSF. + */ + value = ixp2000_reg_read(IXP2000_RESET0); + ixp2000_reg_write(IXP2000_RESET0, value | 0x80); + ixp2000_reg_write(IXP2000_RESET0, value & ~0x80); + + /* + * Initialise the RX section. + */ + ixp2000_reg_write(IXP2000_MSF_RX_MPHY_POLL_LIMIT, mp->rx_poll_ports - 1); + ixp2000_reg_write(IXP2000_MSF_RX_CONTROL, mp->rx_mode); + for (i = 0; i < 4; i++) { + ixp2000_reg_write(IXP2000_MSF_RX_UP_CONTROL_0 + i, + mp->rx_channel_mode[i]); + } + ixp2400_msf_free_rbuf_entries(mp); + ixp2400_msf_enable_rx(mp); + + /* + * Initialise the TX section. + */ + ixp2000_reg_write(IXP2000_MSF_TX_MPHY_POLL_LIMIT, mp->tx_poll_ports - 1); + ixp2000_reg_write(IXP2000_MSF_TX_CONTROL, mp->tx_mode); + for (i = 0; i < 4; i++) { + ixp2000_reg_write(IXP2000_MSF_TX_UP_CONTROL_0 + i, + mp->tx_channel_mode[i]); + } + ixp2400_msf_enable_tx(mp); +} |