diff options
Diffstat (limited to 'drivers/net/ethernet/xilinx/ll_temac_mdio.c')
| -rw-r--r-- | drivers/net/ethernet/xilinx/ll_temac_mdio.c | 122 |
1 files changed, 122 insertions, 0 deletions
diff --git a/drivers/net/ethernet/xilinx/ll_temac_mdio.c b/drivers/net/ethernet/xilinx/ll_temac_mdio.c new file mode 100644 index 00000000000..8cf9d4f56bb --- /dev/null +++ b/drivers/net/ethernet/xilinx/ll_temac_mdio.c @@ -0,0 +1,122 @@ +/* + * MDIO bus driver for the Xilinx TEMAC device + * + * Copyright (c) 2009 Secret Lab Technologies, Ltd. + */ + +#include <linux/io.h> +#include <linux/netdevice.h> +#include <linux/mutex.h> +#include <linux/phy.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_address.h> +#include <linux/slab.h> +#include <linux/of_mdio.h> + +#include "ll_temac.h" + +/* --------------------------------------------------------------------- + * MDIO Bus functions + */ +static int temac_mdio_read(struct mii_bus *bus, int phy_id, int reg) +{ + struct temac_local *lp = bus->priv; + u32 rc; + + /* Write the PHY address to the MIIM Access Initiator register. + * When the transfer completes, the PHY register value will appear + * in the LSW0 register */ + mutex_lock(&lp->indirect_mutex); + temac_iow(lp, XTE_LSW0_OFFSET, (phy_id << 5) | reg); + rc = temac_indirect_in32(lp, XTE_MIIMAI_OFFSET); + mutex_unlock(&lp->indirect_mutex); + + dev_dbg(lp->dev, "temac_mdio_read(phy_id=%i, reg=%x) == %x\n", + phy_id, reg, rc); + + return rc; +} + +static int temac_mdio_write(struct mii_bus *bus, int phy_id, int reg, u16 val) +{ + struct temac_local *lp = bus->priv; + + dev_dbg(lp->dev, "temac_mdio_write(phy_id=%i, reg=%x, val=%x)\n", + phy_id, reg, val); + + /* First write the desired value into the write data register + * and then write the address into the access initiator register + */ + mutex_lock(&lp->indirect_mutex); + temac_indirect_out32(lp, XTE_MGTDR_OFFSET, val); + temac_indirect_out32(lp, XTE_MIIMAI_OFFSET, (phy_id << 5) | reg); + mutex_unlock(&lp->indirect_mutex); + + return 0; +} + +int temac_mdio_setup(struct temac_local *lp, struct device_node *np) +{ + struct mii_bus *bus; + const u32 *bus_hz; + int clk_div; + int rc, size; + struct resource res; + + /* Calculate a reasonable divisor for the clock rate */ + clk_div = 0x3f; /* worst-case default setting */ + bus_hz = of_get_property(np, "clock-frequency", &size); + if (bus_hz && size >= sizeof(*bus_hz)) { + clk_div = (*bus_hz) / (2500 * 1000 * 2) - 1; + if (clk_div < 1) + clk_div = 1; + if (clk_div > 0x3f) + clk_div = 0x3f; + } + + /* Enable the MDIO bus by asserting the enable bit and writing + * in the clock config */ + mutex_lock(&lp->indirect_mutex); + temac_indirect_out32(lp, XTE_MC_OFFSET, 1 << 6 | clk_div); + mutex_unlock(&lp->indirect_mutex); + + bus = mdiobus_alloc(); + if (!bus) + return -ENOMEM; + + of_address_to_resource(np, 0, &res); + snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx", + (unsigned long long)res.start); + bus->priv = lp; + bus->name = "Xilinx TEMAC MDIO"; + bus->read = temac_mdio_read; + bus->write = temac_mdio_write; + bus->parent = lp->dev; + bus->irq = lp->mdio_irqs; /* preallocated IRQ table */ + + lp->mii_bus = bus; + + rc = of_mdiobus_register(bus, np); + if (rc) + goto err_register; + + mutex_lock(&lp->indirect_mutex); + dev_dbg(lp->dev, "MDIO bus registered; MC:%x\n", + temac_indirect_in32(lp, XTE_MC_OFFSET)); + mutex_unlock(&lp->indirect_mutex); + return 0; + + err_register: + mdiobus_free(bus); + return rc; +} + +void temac_mdio_teardown(struct temac_local *lp) +{ + mdiobus_unregister(lp->mii_bus); + kfree(lp->mii_bus->irq); + mdiobus_free(lp->mii_bus); + lp->mii_bus = NULL; +} + |