aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c')
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c48
1 files changed, 46 insertions, 2 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index cc15039eaa4..fe7bc990386 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -27,6 +27,9 @@
#include <linux/mii.h>
#include <linux/phy.h>
#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+
#include <asm/io.h>
#include "stmmac.h"
@@ -131,10 +134,46 @@ static int stmmac_mdio_reset(struct mii_bus *bus)
struct net_device *ndev = bus->priv;
struct stmmac_priv *priv = netdev_priv(ndev);
unsigned int mii_address = priv->hw->mii.addr;
+ struct stmmac_mdio_bus_data *data = priv->plat->mdio_bus_data;
+
+#ifdef CONFIG_OF
+ if (priv->device->of_node) {
+ int reset_gpio, active_low;
+
+ if (data->reset_gpio < 0) {
+ struct device_node *np = priv->device->of_node;
+ if (!np)
+ return 0;
+
+ data->reset_gpio = of_get_named_gpio(np,
+ "snps,reset-gpio", 0);
+ if (data->reset_gpio < 0)
+ return 0;
+
+ data->active_low = of_property_read_bool(np,
+ "snps,reset-active-low");
+ of_property_read_u32_array(np,
+ "snps,reset-delays-us", data->delays, 3);
+ }
+
+ reset_gpio = data->reset_gpio;
+ active_low = data->active_low;
+
+ if (!gpio_request(reset_gpio, "mdio-reset")) {
+ gpio_direction_output(reset_gpio, active_low ? 1 : 0);
+ udelay(data->delays[0]);
+ gpio_set_value(reset_gpio, active_low ? 0 : 1);
+ udelay(data->delays[1]);
+ gpio_set_value(reset_gpio, active_low ? 1 : 0);
+ udelay(data->delays[2]);
+ gpio_free(reset_gpio);
+ }
+ }
+#endif
- if (priv->plat->mdio_bus_data->phy_reset) {
+ if (data->phy_reset) {
pr_debug("stmmac_mdio_reset: calling phy_reset\n");
- priv->plat->mdio_bus_data->phy_reset(priv->plat->bsp_priv);
+ data->phy_reset(priv->plat->bsp_priv);
}
/* This is a workaround for problems with the STE101P PHY.
@@ -172,6 +211,11 @@ int stmmac_mdio_register(struct net_device *ndev)
else
irqlist = priv->mii_irq;
+#ifdef CONFIG_OF
+ if (priv->device->of_node)
+ mdio_bus_data->reset_gpio = -1;
+#endif
+
new_bus->name = "stmmac";
new_bus->read = &stmmac_mdio_read;
new_bus->write = &stmmac_mdio_write;