diff options
Diffstat (limited to 'drivers/net/ethernet/smsc/smsc911x.c')
-rw-r--r-- | drivers/net/ethernet/smsc/smsc911x.c | 203 |
1 files changed, 192 insertions, 11 deletions
diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c index 8843071fe98..9d0b8ced023 100644 --- a/drivers/net/ethernet/smsc/smsc911x.c +++ b/drivers/net/ethernet/smsc/smsc911x.c @@ -44,6 +44,7 @@ #include <linux/module.h> #include <linux/netdevice.h> #include <linux/platform_device.h> +#include <linux/regulator/consumer.h> #include <linux/sched.h> #include <linux/timer.h> #include <linux/bug.h> @@ -88,6 +89,8 @@ struct smsc911x_ops { unsigned int *buf, unsigned int wordcount); }; +#define SMSC911X_NUM_SUPPLIES 2 + struct smsc911x_data { void __iomem *ioaddr; @@ -138,6 +141,9 @@ struct smsc911x_data { /* register access functions */ const struct smsc911x_ops *ops; + + /* regulators */ + struct regulator_bulk_data supplies[SMSC911X_NUM_SUPPLIES]; }; /* Easy access to information */ @@ -362,6 +368,76 @@ out: spin_unlock_irqrestore(&pdata->dev_lock, flags); } +/* + * enable resources, currently just regulators. + */ +static int smsc911x_enable_resources(struct platform_device *pdev) +{ + struct net_device *ndev = platform_get_drvdata(pdev); + struct smsc911x_data *pdata = netdev_priv(ndev); + int ret = 0; + + ret = regulator_bulk_enable(ARRAY_SIZE(pdata->supplies), + pdata->supplies); + if (ret) + netdev_err(ndev, "failed to enable regulators %d\n", + ret); + return ret; +} + +/* + * disable resources, currently just regulators. + */ +static int smsc911x_disable_resources(struct platform_device *pdev) +{ + struct net_device *ndev = platform_get_drvdata(pdev); + struct smsc911x_data *pdata = netdev_priv(ndev); + int ret = 0; + + ret = regulator_bulk_disable(ARRAY_SIZE(pdata->supplies), + pdata->supplies); + return ret; +} + +/* + * Request resources, currently just regulators. + * + * The SMSC911x has two power pins: vddvario and vdd33a, in designs where + * these are not always-on we need to request regulators to be turned on + * before we can try to access the device registers. + */ +static int smsc911x_request_resources(struct platform_device *pdev) +{ + struct net_device *ndev = platform_get_drvdata(pdev); + struct smsc911x_data *pdata = netdev_priv(ndev); + int ret = 0; + + /* Request regulators */ + pdata->supplies[0].supply = "vdd33a"; + pdata->supplies[1].supply = "vddvario"; + ret = regulator_bulk_get(&pdev->dev, + ARRAY_SIZE(pdata->supplies), + pdata->supplies); + if (ret) + netdev_err(ndev, "couldn't get regulators %d\n", + ret); + return ret; +} + +/* + * Free resources, currently just regulators. + * + */ +static void smsc911x_free_resources(struct platform_device *pdev) +{ + struct net_device *ndev = platform_get_drvdata(pdev); + struct smsc911x_data *pdata = netdev_priv(ndev); + + /* Free regulators */ + regulator_bulk_free(ARRAY_SIZE(pdata->supplies), + pdata->supplies); +} + /* waits for MAC not busy, with timeout. Only called by smsc911x_mac_read * and smsc911x_mac_write, so assumes mac_lock is held */ static int smsc911x_mac_complete(struct smsc911x_data *pdata) @@ -1243,10 +1319,92 @@ static void smsc911x_rx_multicast_update_workaround(struct smsc911x_data *pdata) spin_unlock(&pdata->mac_lock); } +static int smsc911x_phy_disable_energy_detect(struct smsc911x_data *pdata) +{ + int rc = 0; + + if (!pdata->phy_dev) + return rc; + + rc = phy_read(pdata->phy_dev, MII_LAN83C185_CTRL_STATUS); + + if (rc < 0) { + SMSC_WARN(pdata, drv, "Failed reading PHY control reg"); + return rc; + } + + /* + * If energy is detected the PHY is already awake so is not necessary + * to disable the energy detect power-down mode. + */ + if ((rc & MII_LAN83C185_EDPWRDOWN) && + !(rc & MII_LAN83C185_ENERGYON)) { + /* Disable energy detect mode for this SMSC Transceivers */ + rc = phy_write(pdata->phy_dev, MII_LAN83C185_CTRL_STATUS, + rc & (~MII_LAN83C185_EDPWRDOWN)); + + if (rc < 0) { + SMSC_WARN(pdata, drv, "Failed writing PHY control reg"); + return rc; + } + + mdelay(1); + } + + return 0; +} + +static int smsc911x_phy_enable_energy_detect(struct smsc911x_data *pdata) +{ + int rc = 0; + + if (!pdata->phy_dev) + return rc; + + rc = phy_read(pdata->phy_dev, MII_LAN83C185_CTRL_STATUS); + + if (rc < 0) { + SMSC_WARN(pdata, drv, "Failed reading PHY control reg"); + return rc; + } + + /* Only enable if energy detect mode is already disabled */ + if (!(rc & MII_LAN83C185_EDPWRDOWN)) { + mdelay(100); + /* Enable energy detect mode for this SMSC Transceivers */ + rc = phy_write(pdata->phy_dev, MII_LAN83C185_CTRL_STATUS, + rc | MII_LAN83C185_EDPWRDOWN); + + if (rc < 0) { + SMSC_WARN(pdata, drv, "Failed writing PHY control reg"); + return rc; + } + + mdelay(1); + } + return 0; +} + static int smsc911x_soft_reset(struct smsc911x_data *pdata) { unsigned int timeout; unsigned int temp; + int ret; + + /* + * LAN9210/LAN9211/LAN9220/LAN9221 chips have an internal PHY that + * are initialized in a Energy Detect Power-Down mode that prevents + * the MAC chip to be software reseted. So we have to wakeup the PHY + * before. + */ + if (pdata->generation == 4) { + ret = smsc911x_phy_disable_energy_detect(pdata); + + if (ret) { + SMSC_WARN(pdata, drv, "Failed to wakeup the PHY chip"); + return ret; + } + } /* Reset the LAN911x */ smsc911x_reg_write(pdata, HW_CFG, HW_CFG_SRST_); @@ -1260,6 +1418,16 @@ static int smsc911x_soft_reset(struct smsc911x_data *pdata) SMSC_WARN(pdata, drv, "Failed to complete reset"); return -EIO; } + + if (pdata->generation == 4) { + ret = smsc911x_phy_enable_energy_detect(pdata); + + if (ret) { + SMSC_WARN(pdata, drv, "Failed to wakeup the PHY chip"); + return ret; + } + } + return 0; } @@ -2092,6 +2260,9 @@ static int __devexit smsc911x_drv_remove(struct platform_device *pdev) iounmap(pdata->ioaddr); + (void)smsc911x_disable_resources(pdev); + smsc911x_free_resources(pdev); + free_netdev(dev); return 0; @@ -2218,10 +2389,20 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev) pdata->dev = dev; pdata->msg_enable = ((1 << debug) - 1); + platform_set_drvdata(pdev, dev); + + retval = smsc911x_request_resources(pdev); + if (retval) + goto out_return_resources; + + retval = smsc911x_enable_resources(pdev); + if (retval) + goto out_disable_resources; + if (pdata->ioaddr == NULL) { SMSC_WARN(pdata, probe, "Error smsc911x base address invalid"); retval = -ENOMEM; - goto out_free_netdev_2; + goto out_disable_resources; } retval = smsc911x_probe_config_dt(&pdata->config, np); @@ -2233,7 +2414,7 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev) if (retval) { SMSC_WARN(pdata, probe, "Error smsc911x config not found"); - goto out_unmap_io_3; + goto out_disable_resources; } /* assume standard, non-shifted, access to HW registers */ @@ -2244,7 +2425,7 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev) retval = smsc911x_init(dev); if (retval < 0) - goto out_unmap_io_3; + goto out_disable_resources; /* configure irq polarity and type before connecting isr */ if (pdata->config.irq_polarity == SMSC911X_IRQ_POLARITY_ACTIVE_HIGH) @@ -2264,15 +2445,13 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev) if (retval) { SMSC_WARN(pdata, probe, "Unable to claim requested irq: %d", dev->irq); - goto out_unmap_io_3; + goto out_free_irq; } - platform_set_drvdata(pdev, dev); - retval = register_netdev(dev); if (retval) { SMSC_WARN(pdata, probe, "Error %i registering device", retval); - goto out_unset_drvdata_4; + goto out_free_irq; } else { SMSC_TRACE(pdata, probe, "Network interface: \"%s\"", dev->name); @@ -2321,12 +2500,14 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev) out_unregister_netdev_5: unregister_netdev(dev); -out_unset_drvdata_4: - platform_set_drvdata(pdev, NULL); +out_free_irq: free_irq(dev->irq, dev); -out_unmap_io_3: +out_disable_resources: + (void)smsc911x_disable_resources(pdev); +out_return_resources: + smsc911x_free_resources(pdev); + platform_set_drvdata(pdev, NULL); iounmap(pdata->ioaddr); -out_free_netdev_2: free_netdev(dev); out_release_io_1: release_mem_region(res->start, resource_size(res)); |