diff options
Diffstat (limited to 'drivers/net/ethernet/intel')
85 files changed, 6221 insertions, 3069 deletions
diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig index ddee4060948..05f7264c51f 100644 --- a/drivers/net/ethernet/intel/Kconfig +++ b/drivers/net/ethernet/intel/Kconfig @@ -5,11 +5,6 @@ config NET_VENDOR_INTEL bool "Intel devices" default y - depends on PCI || PCI_MSI || ISA || ISA_DMA_API || ARM || \ - ARCH_ACORN || MCA || MCA_LEGACY || SNI_RM || SUN3 || \ - GSC || BVME6000 || MVME16x || \ - (ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR) || \ - EXPERIMENTAL ---help--- If you have a network (Ethernet) card belonging to this class, say Y and read the Ethernet-HOWTO, available from @@ -74,6 +69,7 @@ config E1000E tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support" depends on PCI && (!SPARC32 || BROKEN) select CRC32 + select PTP_1588_CLOCK ---help--- This driver supports the PCI-Express Intel(R) PRO/1000 gigabit ethernet family of adapters. For PCI or PCI-X e1000 adapters, @@ -94,6 +90,8 @@ config IGB tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support" depends on PCI select PTP_1588_CLOCK + select I2C + select I2C_ALGOBIT ---help--- This driver supports Intel(R) 82575/82576 gigabit ethernet family of adapters. For more information on how to identify your adapter, go @@ -112,6 +110,17 @@ config IGB To compile this driver as a module, choose M here. The module will be called igb. +config IGB_HWMON + bool "Intel(R) PCI-Express Gigabit adapters HWMON support" + default y + depends on IGB && HWMON && !(IGB=y && HWMON=m) + ---help--- + Say Y if you want to expose thermal sensor data on Intel devices. + + Some of our devices contain thermal sensors, both external and internal. + This data is available via the hwmon sysfs interface and exposes + the onboard sensors. + config IGB_DCA bool "Direct Cache Access (DCA) Support" default y diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c index a59f0779e1c..ec800b093e7 100644 --- a/drivers/net/ethernet/intel/e100.c +++ b/drivers/net/ethernet/intel/e100.c @@ -2928,8 +2928,7 @@ static int e100_probe(struct pci_dev *pdev, const struct pci_device_id *ent) e100_phy_init(nic); memcpy(netdev->dev_addr, nic->eeprom, ETH_ALEN); - memcpy(netdev->perm_addr, nic->eeprom, ETH_ALEN); - if (!is_valid_ether_addr(netdev->perm_addr)) { + if (!is_valid_ether_addr(netdev->dev_addr)) { if (!eeprom_bad_csum_allow) { netif_err(nic, probe, nic->netdev, "Invalid MAC address from EEPROM, aborting\n"); err = -EAGAIN; diff --git a/drivers/net/ethernet/intel/e1000/e1000.h b/drivers/net/ethernet/intel/e1000/e1000.h index 2b6cd02bfba..26d9cd59ec7 100644 --- a/drivers/net/ethernet/intel/e1000/e1000.h +++ b/drivers/net/ethernet/intel/e1000/e1000.h @@ -81,68 +81,69 @@ struct e1000_adapter; #include "e1000_hw.h" -#define E1000_MAX_INTR 10 +#define E1000_MAX_INTR 10 /* TX/RX descriptor defines */ -#define E1000_DEFAULT_TXD 256 -#define E1000_MAX_TXD 256 -#define E1000_MIN_TXD 48 -#define E1000_MAX_82544_TXD 4096 +#define E1000_DEFAULT_TXD 256 +#define E1000_MAX_TXD 256 +#define E1000_MIN_TXD 48 +#define E1000_MAX_82544_TXD 4096 -#define E1000_DEFAULT_RXD 256 -#define E1000_MAX_RXD 256 -#define E1000_MIN_RXD 48 -#define E1000_MAX_82544_RXD 4096 +#define E1000_DEFAULT_RXD 256 +#define E1000_MAX_RXD 256 +#define E1000_MIN_RXD 48 +#define E1000_MAX_82544_RXD 4096 #define E1000_MIN_ITR_USECS 10 /* 100000 irq/sec */ #define E1000_MAX_ITR_USECS 10000 /* 100 irq/sec */ /* this is the size past which hardware will drop packets when setting LPE=0 */ -#define MAXIMUM_ETHERNET_VLAN_SIZE 1522 +#define MAXIMUM_ETHERNET_VLAN_SIZE 1522 /* Supported Rx Buffer Sizes */ -#define E1000_RXBUFFER_128 128 /* Used for packet split */ -#define E1000_RXBUFFER_256 256 /* Used for packet split */ -#define E1000_RXBUFFER_512 512 -#define E1000_RXBUFFER_1024 1024 -#define E1000_RXBUFFER_2048 2048 -#define E1000_RXBUFFER_4096 4096 -#define E1000_RXBUFFER_8192 8192 -#define E1000_RXBUFFER_16384 16384 +#define E1000_RXBUFFER_128 128 /* Used for packet split */ +#define E1000_RXBUFFER_256 256 /* Used for packet split */ +#define E1000_RXBUFFER_512 512 +#define E1000_RXBUFFER_1024 1024 +#define E1000_RXBUFFER_2048 2048 +#define E1000_RXBUFFER_4096 4096 +#define E1000_RXBUFFER_8192 8192 +#define E1000_RXBUFFER_16384 16384 /* SmartSpeed delimiters */ -#define E1000_SMARTSPEED_DOWNSHIFT 3 -#define E1000_SMARTSPEED_MAX 15 +#define E1000_SMARTSPEED_DOWNSHIFT 3 +#define E1000_SMARTSPEED_MAX 15 /* Packet Buffer allocations */ -#define E1000_PBA_BYTES_SHIFT 0xA -#define E1000_TX_HEAD_ADDR_SHIFT 7 -#define E1000_PBA_TX_MASK 0xFFFF0000 +#define E1000_PBA_BYTES_SHIFT 0xA +#define E1000_TX_HEAD_ADDR_SHIFT 7 +#define E1000_PBA_TX_MASK 0xFFFF0000 /* Flow Control Watermarks */ -#define E1000_FC_HIGH_DIFF 0x1638 /* High: 5688 bytes below Rx FIFO size */ -#define E1000_FC_LOW_DIFF 0x1640 /* Low: 5696 bytes below Rx FIFO size */ +#define E1000_FC_HIGH_DIFF 0x1638 /* High: 5688 bytes below Rx FIFO size */ +#define E1000_FC_LOW_DIFF 0x1640 /* Low: 5696 bytes below Rx FIFO size */ -#define E1000_FC_PAUSE_TIME 0xFFFF /* pause for the max or until send xon */ +#define E1000_FC_PAUSE_TIME 0xFFFF /* pause for the max or until send xon */ /* How many Tx Descriptors do we need to call netif_wake_queue ? */ #define E1000_TX_QUEUE_WAKE 16 /* How many Rx Buffers do we bundle into one write to the hardware ? */ -#define E1000_RX_BUFFER_WRITE 16 /* Must be power of 2 */ +#define E1000_RX_BUFFER_WRITE 16 /* Must be power of 2 */ -#define AUTO_ALL_MODES 0 -#define E1000_EEPROM_82544_APM 0x0004 -#define E1000_EEPROM_APME 0x0400 +#define AUTO_ALL_MODES 0 +#define E1000_EEPROM_82544_APM 0x0004 +#define E1000_EEPROM_APME 0x0400 #ifndef E1000_MASTER_SLAVE /* Switch to override PHY master/slave setting */ #define E1000_MASTER_SLAVE e1000_ms_hw_default #endif -#define E1000_MNG_VLAN_NONE (-1) +#define E1000_MNG_VLAN_NONE (-1) /* wrapper around a pointer to a socket buffer, - * so a DMA handle can be stored along with the buffer */ + * so a DMA handle can be stored along with the buffer + */ struct e1000_buffer { struct sk_buff *skb; dma_addr_t dma; diff --git a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c index 14e30515f6a..43462d596a4 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c +++ b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c @@ -115,12 +115,12 @@ static int e1000_get_settings(struct net_device *netdev, if (hw->media_type == e1000_media_type_copper) { ecmd->supported = (SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full | - SUPPORTED_100baseT_Half | - SUPPORTED_100baseT_Full | - SUPPORTED_1000baseT_Full| - SUPPORTED_Autoneg | - SUPPORTED_TP); + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full| + SUPPORTED_Autoneg | + SUPPORTED_TP); ecmd->advertising = ADVERTISED_TP; if (hw->autoneg == 1) { @@ -161,8 +161,8 @@ static int e1000_get_settings(struct net_device *netdev, ethtool_cmd_speed_set(ecmd, adapter->link_speed); /* unfortunately FULL_DUPLEX != DUPLEX_FULL - * and HALF_DUPLEX != DUPLEX_HALF */ - + * and HALF_DUPLEX != DUPLEX_HALF + */ if (adapter->link_duplex == FULL_DUPLEX) ecmd->duplex = DUPLEX_FULL; else @@ -179,8 +179,7 @@ static int e1000_get_settings(struct net_device *netdev, if ((hw->media_type == e1000_media_type_copper) && netif_carrier_ok(netdev)) ecmd->eth_tp_mdix = (!!adapter->phy_info.mdix_mode ? - ETH_TP_MDI_X : - ETH_TP_MDI); + ETH_TP_MDI_X : ETH_TP_MDI); else ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID; @@ -197,8 +196,7 @@ static int e1000_set_settings(struct net_device *netdev, struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - /* - * MDI setting is only allowed when autoneg enabled because + /* MDI setting is only allowed when autoneg enabled because * some hardware doesn't allow MDI setting when speed or * duplex is forced. */ @@ -224,8 +222,8 @@ static int e1000_set_settings(struct net_device *netdev, ADVERTISED_Autoneg; else hw->autoneg_advertised = ecmd->advertising | - ADVERTISED_TP | - ADVERTISED_Autoneg; + ADVERTISED_TP | + ADVERTISED_Autoneg; ecmd->advertising = hw->autoneg_advertised; } else { u32 speed = ethtool_cmd_speed(ecmd); @@ -260,8 +258,7 @@ static u32 e1000_get_link(struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); - /* - * If the link is not reported up to netdev, interrupts are disabled, + /* If the link is not reported up to netdev, interrupts are disabled, * and so the physical link state may have changed since we last * looked. Set get_link_status to make sure that the true link * state is interrogated, rather than pulling a cached and possibly @@ -484,7 +481,7 @@ static int e1000_get_eeprom(struct net_device *netdev, le16_to_cpus(&eeprom_buff[i]); memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1), - eeprom->len); + eeprom->len); kfree(eeprom_buff); return ret_val; @@ -517,15 +514,17 @@ static int e1000_set_eeprom(struct net_device *netdev, ptr = (void *)eeprom_buff; if (eeprom->offset & 1) { - /* need read/modify/write of first changed EEPROM word */ - /* only the second byte of the word is being modified */ + /* need read/modify/write of first changed EEPROM word + * only the second byte of the word is being modified + */ ret_val = e1000_read_eeprom(hw, first_word, 1, &eeprom_buff[0]); ptr++; } if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0)) { - /* need read/modify/write of last changed EEPROM word */ - /* only the first byte of the word is being modified */ + /* need read/modify/write of last changed EEPROM word + * only the first byte of the word is being modified + */ ret_val = e1000_read_eeprom(hw, last_word, 1, &eeprom_buff[last_word - first_word]); } @@ -606,11 +605,13 @@ static int e1000_set_ringparam(struct net_device *netdev, rx_old = adapter->rx_ring; err = -ENOMEM; - txdr = kcalloc(adapter->num_tx_queues, sizeof(struct e1000_tx_ring), GFP_KERNEL); + txdr = kcalloc(adapter->num_tx_queues, sizeof(struct e1000_tx_ring), + GFP_KERNEL); if (!txdr) goto err_alloc_tx; - rxdr = kcalloc(adapter->num_rx_queues, sizeof(struct e1000_rx_ring), GFP_KERNEL); + rxdr = kcalloc(adapter->num_rx_queues, sizeof(struct e1000_rx_ring), + GFP_KERNEL); if (!rxdr) goto err_alloc_rx; @@ -619,12 +620,12 @@ static int e1000_set_ringparam(struct net_device *netdev, rxdr->count = max(ring->rx_pending,(u32)E1000_MIN_RXD); rxdr->count = min(rxdr->count,(u32)(mac_type < e1000_82544 ? - E1000_MAX_RXD : E1000_MAX_82544_RXD)); + E1000_MAX_RXD : E1000_MAX_82544_RXD)); rxdr->count = ALIGN(rxdr->count, REQ_RX_DESCRIPTOR_MULTIPLE); txdr->count = max(ring->tx_pending,(u32)E1000_MIN_TXD); txdr->count = min(txdr->count,(u32)(mac_type < e1000_82544 ? - E1000_MAX_TXD : E1000_MAX_82544_TXD)); + E1000_MAX_TXD : E1000_MAX_82544_TXD)); txdr->count = ALIGN(txdr->count, REQ_TX_DESCRIPTOR_MULTIPLE); for (i = 0; i < adapter->num_tx_queues; i++) @@ -642,7 +643,8 @@ static int e1000_set_ringparam(struct net_device *netdev, goto err_setup_tx; /* save the new, restore the old in order to free it, - * then restore the new back again */ + * then restore the new back again + */ adapter->rx_ring = rx_old; adapter->tx_ring = tx_old; @@ -784,7 +786,6 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) REG_SET_AND_CHECK(TCTL, 0xFFFFFFFF, 0x00000000); if (hw->mac_type >= e1000_82543) { - REG_SET_AND_CHECK(RCTL, before, 0xFFFFFFFF); REG_PATTERN_TEST(RDBAL, 0xFFFFFFF0, 0xFFFFFFFF); REG_PATTERN_TEST(TXCW, 0xC000FFFF, 0x0000FFFF); @@ -795,14 +796,11 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) REG_PATTERN_TEST(RA + (((i << 1) + 1) << 2), 0x8003FFFF, 0xFFFFFFFF); } - } else { - REG_SET_AND_CHECK(RCTL, 0xFFFFFFFF, 0x01FFFFFF); REG_PATTERN_TEST(RDBAL, 0xFFFFF000, 0xFFFFFFFF); REG_PATTERN_TEST(TXCW, 0x0000FFFF, 0x0000FFFF); REG_PATTERN_TEST(TDBAL, 0xFFFFF000, 0xFFFFFFFF); - } value = E1000_MC_TBL_SIZE; @@ -858,13 +856,14 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) *data = 0; - /* NOTE: we don't test MSI interrupts here, yet */ - /* Hook up test interrupt handler just for this test */ + /* NOTE: we don't test MSI interrupts here, yet + * Hook up test interrupt handler just for this test + */ if (!request_irq(irq, e1000_test_intr, IRQF_PROBE_SHARED, netdev->name, - netdev)) + netdev)) shared_int = false; else if (request_irq(irq, e1000_test_intr, IRQF_SHARED, - netdev->name, netdev)) { + netdev->name, netdev)) { *data = 1; return -1; } @@ -1253,14 +1252,15 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */ E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */ E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */ - E1000_CTRL_FD); /* Force Duplex to FULL */ + E1000_CTRL_FD); /* Force Duplex to FULL */ if (hw->media_type == e1000_media_type_copper && hw->phy_type == e1000_phy_m88) ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */ else { /* Set the ILOS bit on the fiber Nic is half - * duplex link is detected. */ + * duplex link is detected. + */ stat_reg = er32(STATUS); if ((stat_reg & E1000_STATUS_FD) == 0) ctrl_reg |= (E1000_CTRL_ILOS | E1000_CTRL_SLU); @@ -1446,7 +1446,7 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter) ret_val = e1000_check_lbtest_frame( rxdr->buffer_info[l].skb, - 1024); + 1024); if (!ret_val) good_cnt++; if (unlikely(++l == rxdr->count)) l = 0; @@ -1493,7 +1493,8 @@ static int e1000_link_test(struct e1000_adapter *adapter, u64 *data) hw->serdes_has_link = false; /* On some blade server designs, link establishment - * could take as long as 2-3 minutes */ + * could take as long as 2-3 minutes + */ do { e1000_check_for_link(hw); if (hw->serdes_has_link) @@ -1545,7 +1546,8 @@ static void e1000_diag_test(struct net_device *netdev, e_info(hw, "offline testing starting\n"); /* Link test performed before hardware reset so autoneg doesn't - * interfere with test result */ + * interfere with test result + */ if (e1000_link_test(adapter, &data[4])) eth_test->flags |= ETH_TEST_FL_FAILED; @@ -1639,7 +1641,8 @@ static int e1000_wol_exclusion(struct e1000_adapter *adapter, default: /* dual port cards only support WoL on port A from now on * unless it was enabled in the eeprom for port B - * so exclude FUNC_1 ports from having WoL enabled */ + * so exclude FUNC_1 ports from having WoL enabled + */ if (er32(STATUS) & E1000_STATUS_FUNC_1 && !adapter->eeprom_wol) { wol->supported = 0; @@ -1663,7 +1666,8 @@ static void e1000_get_wol(struct net_device *netdev, wol->wolopts = 0; /* this function will set ->supported = 0 and return 1 if wol is not - * supported by this hardware */ + * supported by this hardware + */ if (e1000_wol_exclusion(adapter, wol) || !device_can_wakeup(&adapter->pdev->dev)) return; @@ -1839,7 +1843,7 @@ static void e1000_get_ethtool_stats(struct net_device *netdev, data[i] = (e1000_gstrings_stats[i].sizeof_stat == sizeof(u64)) ? *(u64 *)p : *(u32 *)p; } -/* BUG_ON(i != E1000_STATS_LEN); */ +/* BUG_ON(i != E1000_STATS_LEN); */ } static void e1000_get_strings(struct net_device *netdev, u32 stringset, @@ -1859,37 +1863,37 @@ static void e1000_get_strings(struct net_device *netdev, u32 stringset, ETH_GSTRING_LEN); p += ETH_GSTRING_LEN; } -/* BUG_ON(p - data != E1000_STATS_LEN * ETH_GSTRING_LEN); */ + /* BUG_ON(p - data != E1000_STATS_LEN * ETH_GSTRING_LEN); */ break; } } static const struct ethtool_ops e1000_ethtool_ops = { - .get_settings = e1000_get_settings, - .set_settings = e1000_set_settings, - .get_drvinfo = e1000_get_drvinfo, - .get_regs_len = e1000_get_regs_len, - .get_regs = e1000_get_regs, - .get_wol = e1000_get_wol, - .set_wol = e1000_set_wol, - .get_msglevel = e1000_get_msglevel, - .set_msglevel = e1000_set_msglevel, - .nway_reset = e1000_nway_reset, - .get_link = e1000_get_link, - .get_eeprom_len = e1000_get_eeprom_len, - .get_eeprom = e1000_get_eeprom, - .set_eeprom = e1000_set_eeprom, - .get_ringparam = e1000_get_ringparam, - .set_ringparam = e1000_set_ringparam, - .get_pauseparam = e1000_get_pauseparam, - .set_pauseparam = e1000_set_pauseparam, - .self_test = e1000_diag_test, - .get_strings = e1000_get_strings, - .set_phys_id = e1000_set_phys_id, - .get_ethtool_stats = e1000_get_ethtool_stats, - .get_sset_count = e1000_get_sset_count, - .get_coalesce = e1000_get_coalesce, - .set_coalesce = e1000_set_coalesce, + .get_settings = e1000_get_settings, + .set_settings = e1000_set_settings, + .get_drvinfo = e1000_get_drvinfo, + .get_regs_len = e1000_get_regs_len, + .get_regs = e1000_get_regs, + .get_wol = e1000_get_wol, + .set_wol = e1000_set_wol, + .get_msglevel = e1000_get_msglevel, + .set_msglevel = e1000_set_msglevel, + .nway_reset = e1000_nway_reset, + .get_link = e1000_get_link, + .get_eeprom_len = e1000_get_eeprom_len, + .get_eeprom = e1000_get_eeprom, + .set_eeprom = e1000_set_eeprom, + .get_ringparam = e1000_get_ringparam, + .set_ringparam = e1000_set_ringparam, + .get_pauseparam = e1000_get_pauseparam, + .set_pauseparam = e1000_set_pauseparam, + .self_test = e1000_diag_test, + .get_strings = e1000_get_strings, + .set_phys_id = e1000_set_phys_id, + .get_ethtool_stats = e1000_get_ethtool_stats, + .get_sset_count = e1000_get_sset_count, + .get_coalesce = e1000_get_coalesce, + .set_coalesce = e1000_set_coalesce, .get_ts_info = ethtool_op_get_ts_info, }; diff --git a/drivers/net/ethernet/intel/e1000/e1000_hw.c b/drivers/net/ethernet/intel/e1000/e1000_hw.c index 8fedd245153..2879b9631e1 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_hw.c +++ b/drivers/net/ethernet/intel/e1000/e1000_hw.c @@ -164,8 +164,9 @@ static void e1000_phy_init_script(struct e1000_hw *hw) if (hw->phy_init_script) { msleep(20); - /* Save off the current value of register 0x2F5B to be restored at - * the end of this routine. */ + /* Save off the current value of register 0x2F5B to be restored + * at the end of this routine. + */ ret_val = e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data); /* Disabled the PHY transmitter */ @@ -466,7 +467,8 @@ s32 e1000_reset_hw(struct e1000_hw *hw) case e1000_82541: case e1000_82541_rev_2: /* These controllers can't ack the 64-bit write when issuing the - * reset, so use IO-mapping as a workaround to issue the reset */ + * reset, so use IO-mapping as a workaround to issue the reset + */ E1000_WRITE_REG_IO(hw, CTRL, (ctrl | E1000_CTRL_RST)); break; case e1000_82545_rev_3: @@ -480,9 +482,9 @@ s32 e1000_reset_hw(struct e1000_hw *hw) break; } - /* After MAC reset, force reload of EEPROM to restore power-on settings to - * device. Later controllers reload the EEPROM automatically, so just wait - * for reload to complete. + /* After MAC reset, force reload of EEPROM to restore power-on settings + * to device. Later controllers reload the EEPROM automatically, so + * just wait for reload to complete. */ switch (hw->mac_type) { case e1000_82542_rev2_0: @@ -591,8 +593,8 @@ s32 e1000_init_hw(struct e1000_hw *hw) msleep(5); } - /* Setup the receive address. This involves initializing all of the Receive - * Address Registers (RARs 0 - 15). + /* Setup the receive address. This involves initializing all of the + * Receive Address Registers (RARs 0 - 15). */ e1000_init_rx_addrs(hw); @@ -611,7 +613,8 @@ s32 e1000_init_hw(struct e1000_hw *hw) for (i = 0; i < mta_size; i++) { E1000_WRITE_REG_ARRAY(hw, MTA, i, 0); /* use write flush to prevent Memory Write Block (MWB) from - * occurring when accessing our register space */ + * occurring when accessing our register space + */ E1000_WRITE_FLUSH(); } @@ -630,7 +633,9 @@ s32 e1000_init_hw(struct e1000_hw *hw) case e1000_82546_rev_3: break; default: - /* Workaround for PCI-X problem when BIOS sets MMRBC incorrectly. */ + /* Workaround for PCI-X problem when BIOS sets MMRBC + * incorrectly. + */ if (hw->bus_type == e1000_bus_type_pcix && e1000_pcix_get_mmrbc(hw) > 2048) e1000_pcix_set_mmrbc(hw, 2048); @@ -660,7 +665,8 @@ s32 e1000_init_hw(struct e1000_hw *hw) hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3) { ctrl_ext = er32(CTRL_EXT); /* Relaxed ordering must be disabled to avoid a parity - * error crash in a PCI slot. */ + * error crash in a PCI slot. + */ ctrl_ext |= E1000_CTRL_EXT_RO_DIS; ew32(CTRL_EXT, ctrl_ext); } @@ -810,8 +816,9 @@ s32 e1000_setup_link(struct e1000_hw *hw) ew32(FCRTL, 0); ew32(FCRTH, 0); } else { - /* We need to set up the Receive Threshold high and low water marks - * as well as (optionally) enabling the transmission of XON frames. + /* We need to set up the Receive Threshold high and low water + * marks as well as (optionally) enabling the transmission of + * XON frames. */ if (hw->fc_send_xon) { ew32(FCRTL, (hw->fc_low_water | E1000_FCRTL_XONE)); @@ -868,42 +875,46 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw) e1000_config_collision_dist(hw); /* Check for a software override of the flow control settings, and setup - * the device accordingly. If auto-negotiation is enabled, then software - * will have to set the "PAUSE" bits to the correct value in the Tranmsit - * Config Word Register (TXCW) and re-start auto-negotiation. However, if - * auto-negotiation is disabled, then software will have to manually - * configure the two flow control enable bits in the CTRL register. + * the device accordingly. If auto-negotiation is enabled, then + * software will have to set the "PAUSE" bits to the correct value in + * the Tranmsit Config Word Register (TXCW) and re-start + * auto-negotiation. However, if auto-negotiation is disabled, then + * software will have to manually configure the two flow control enable + * bits in the CTRL register. * * The possible values of the "fc" parameter are: - * 0: Flow control is completely disabled - * 1: Rx flow control is enabled (we can receive pause frames, but - * not send pause frames). - * 2: Tx flow control is enabled (we can send pause frames but we do - * not support receiving pause frames). - * 3: Both Rx and TX flow control (symmetric) are enabled. + * 0: Flow control is completely disabled + * 1: Rx flow control is enabled (we can receive pause frames, but + * not send pause frames). + * 2: Tx flow control is enabled (we can send pause frames but we do + * not support receiving pause frames). + * 3: Both Rx and TX flow control (symmetric) are enabled. */ switch (hw->fc) { case E1000_FC_NONE: - /* Flow control is completely disabled by a software over-ride. */ + /* Flow ctrl is completely disabled by a software over-ride */ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD); break; case E1000_FC_RX_PAUSE: - /* RX Flow control is enabled and TX Flow control is disabled by a - * software over-ride. Since there really isn't a way to advertise - * that we are capable of RX Pause ONLY, we will advertise that we - * support both symmetric and asymmetric RX PAUSE. Later, we will - * disable the adapter's ability to send PAUSE frames. + /* Rx Flow control is enabled and Tx Flow control is disabled by + * a software over-ride. Since there really isn't a way to + * advertise that we are capable of Rx Pause ONLY, we will + * advertise that we support both symmetric and asymmetric Rx + * PAUSE. Later, we will disable the adapter's ability to send + * PAUSE frames. */ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); break; case E1000_FC_TX_PAUSE: - /* TX Flow control is enabled, and RX Flow control is disabled, by a - * software over-ride. + /* Tx Flow control is enabled, and Rx Flow control is disabled, + * by a software over-ride. */ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_ASM_DIR); break; case E1000_FC_FULL: - /* Flow control (both RX and TX) is enabled by a software over-ride. */ + /* Flow control (both Rx and Tx) is enabled by a software + * over-ride. + */ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); break; default: @@ -912,11 +923,11 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw) break; } - /* Since auto-negotiation is enabled, take the link out of reset (the link - * will be in reset, because we previously reset the chip). This will - * restart auto-negotiation. If auto-negotiation is successful then the - * link-up status bit will be set and the flow control enable bits (RFCE - * and TFCE) will be set according to their negotiated value. + /* Since auto-negotiation is enabled, take the link out of reset (the + * link will be in reset, because we previously reset the chip). This + * will restart auto-negotiation. If auto-negotiation is successful + * then the link-up status bit will be set and the flow control enable + * bits (RFCE and TFCE) will be set according to their negotiated value. */ e_dbg("Auto-negotiation enabled\n"); @@ -927,11 +938,12 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw) hw->txcw = txcw; msleep(1); - /* If we have a signal (the cable is plugged in) then poll for a "Link-Up" - * indication in the Device Status Register. Time-out if a link isn't - * seen in 500 milliseconds seconds (Auto-negotiation should complete in - * less than 500 milliseconds even if the other end is doing it in SW). - * For internal serdes, we just assume a signal is present, then poll. + /* If we have a signal (the cable is plugged in) then poll for a + * "Link-Up" indication in the Device Status Register. Time-out if a + * link isn't seen in 500 milliseconds seconds (Auto-negotiation should + * complete in less than 500 milliseconds even if the other end is doing + * it in SW). For internal serdes, we just assume a signal is present, + * then poll. */ if (hw->media_type == e1000_media_type_internal_serdes || (er32(CTRL) & E1000_CTRL_SWDPIN1) == signal) { @@ -946,9 +958,9 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw) e_dbg("Never got a valid link from auto-neg!!!\n"); hw->autoneg_failed = 1; /* AutoNeg failed to achieve a link, so we'll call - * e1000_check_for_link. This routine will force the link up if - * we detect a signal. This will allow us to communicate with - * non-autonegotiating link partners. + * e1000_check_for_link. This routine will force the + * link up if we detect a signal. This will allow us to + * communicate with non-autonegotiating link partners. */ ret_val = e1000_check_for_link(hw); if (ret_val) { @@ -1042,9 +1054,9 @@ static s32 e1000_copper_link_preconfig(struct e1000_hw *hw) e_dbg("e1000_copper_link_preconfig"); ctrl = er32(CTRL); - /* With 82543, we need to force speed and duplex on the MAC equal to what - * the PHY speed and duplex configuration is. In addition, we need to - * perform a hardware reset on the PHY to take it out of reset. + /* With 82543, we need to force speed and duplex on the MAC equal to + * what the PHY speed and duplex configuration is. In addition, we need + * to perform a hardware reset on the PHY to take it out of reset. */ if (hw->mac_type > e1000_82543) { ctrl |= E1000_CTRL_SLU; @@ -1175,7 +1187,8 @@ static s32 e1000_copper_link_igp_setup(struct e1000_hw *hw) /* when autonegotiation advertisement is only 1000Mbps then we * should disable SmartSpeed and enable Auto MasterSlave - * resolution as hardware default. */ + * resolution as hardware default. + */ if (hw->autoneg_advertised == ADVERTISE_1000_FULL) { /* Disable SmartSpeed */ ret_val = @@ -1485,13 +1498,15 @@ static s32 e1000_setup_copper_link(struct e1000_hw *hw) if (hw->autoneg) { /* Setup autoneg and flow control advertisement - * and perform autonegotiation */ + * and perform autonegotiation + */ ret_val = e1000_copper_link_autoneg(hw); if (ret_val) return ret_val; } else { /* PHY will be set to 10H, 10F, 100H,or 100F - * depending on value from forced_speed_duplex. */ + * depending on value from forced_speed_duplex. + */ e_dbg("Forcing speed and duplex\n"); ret_val = e1000_phy_force_speed_duplex(hw); if (ret_val) { @@ -1609,7 +1624,8 @@ s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) * setup the PHY advertisement registers accordingly. If * auto-negotiation is enabled, then software will have to set the * "PAUSE" bits to the correct value in the Auto-Negotiation - * Advertisement Register (PHY_AUTONEG_ADV) and re-start auto-negotiation. + * Advertisement Register (PHY_AUTONEG_ADV) and re-start + * auto-negotiation. * * The possible values of the "fc" parameter are: * 0: Flow control is completely disabled @@ -1636,7 +1652,7 @@ s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) * capable of RX Pause ONLY, we will advertise that we * support both symmetric and asymmetric RX PAUSE. Later * (in e1000_config_fc_after_link_up) we will disable the - *hw's ability to send PAUSE frames. + * hw's ability to send PAUSE frames. */ mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); break; @@ -1720,15 +1736,15 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw) /* Are we forcing Full or Half Duplex? */ if (hw->forced_speed_duplex == e1000_100_full || hw->forced_speed_duplex == e1000_10_full) { - /* We want to force full duplex so we SET the full duplex bits in the - * Device and MII Control Registers. + /* We want to force full duplex so we SET the full duplex bits + * in the Device and MII Control Registers. */ ctrl |= E1000_CTRL_FD; mii_ctrl_reg |= MII_CR_FULL_DUPLEX; e_dbg("Full Duplex\n"); } else { - /* We want to force half duplex so we CLEAR the full duplex bits in - * the Device and MII Control Registers. + /* We want to force half duplex so we CLEAR the full duplex bits + * in the Device and MII Control Registers. */ ctrl &= ~E1000_CTRL_FD; mii_ctrl_reg &= ~MII_CR_FULL_DUPLEX; @@ -1762,8 +1778,8 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw) if (ret_val) return ret_val; - /* Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI - * forced whenever speed are duplex are forced. + /* Clear Auto-Crossover to force MDI manually. M88E1000 requires + * MDI forced whenever speed are duplex are forced. */ phy_data &= ~M88E1000_PSCR_AUTO_X_MODE; ret_val = @@ -1814,10 +1830,10 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw) e_dbg("Waiting for forced speed/duplex link.\n"); mii_status_reg = 0; - /* We will wait for autoneg to complete or 4.5 seconds to expire. */ + /* Wait for autoneg to complete or 4.5 seconds to expire */ for (i = PHY_FORCE_TIME; i > 0; i--) { - /* Read the MII Status Register and wait for Auto-Neg Complete bit - * to be set. + /* Read the MII Status Register and wait for Auto-Neg + * Complete bit to be set. */ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); @@ -1834,20 +1850,24 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw) msleep(100); } if ((i == 0) && (hw->phy_type == e1000_phy_m88)) { - /* We didn't get link. Reset the DSP and wait again for link. */ + /* We didn't get link. Reset the DSP and wait again + * for link. + */ ret_val = e1000_phy_reset_dsp(hw); if (ret_val) { e_dbg("Error Resetting PHY DSP\n"); return ret_val; } } - /* This loop will early-out if the link condition has been met. */ + /* This loop will early-out if the link condition has been + * met + */ for (i = PHY_FORCE_TIME; i > 0; i--) { if (mii_status_reg & MII_SR_LINK_STATUS) break; msleep(100); - /* Read the MII Status Register and wait for Auto-Neg Complete bit - * to be set. + /* Read the MII Status Register and wait for Auto-Neg + * Complete bit to be set. */ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); @@ -1862,9 +1882,10 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw) } if (hw->phy_type == e1000_phy_m88) { - /* Because we reset the PHY above, we need to re-force TX_CLK in the - * Extended PHY Specific Control Register to 25MHz clock. This value - * defaults back to a 2.5MHz clock when the PHY is reset. + /* Because we reset the PHY above, we need to re-force TX_CLK in + * the Extended PHY Specific Control Register to 25MHz clock. + * This value defaults back to a 2.5MHz clock when the PHY is + * reset. */ ret_val = e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, @@ -1879,8 +1900,9 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw) if (ret_val) return ret_val; - /* In addition, because of the s/w reset above, we need to enable CRS on - * TX. This must be set for both full and half duplex operation. + /* In addition, because of the s/w reset above, we need to + * enable CRS on Tx. This must be set for both full and half + * duplex operation. */ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); @@ -1951,7 +1973,8 @@ static s32 e1000_config_mac_to_phy(struct e1000_hw *hw) e_dbg("e1000_config_mac_to_phy"); /* 82544 or newer MAC, Auto Speed Detection takes care of - * MAC speed/duplex configuration.*/ + * MAC speed/duplex configuration. + */ if ((hw->mac_type >= e1000_82544) && (hw->mac_type != e1000_ce4100)) return E1000_SUCCESS; @@ -1985,7 +2008,7 @@ static s32 e1000_config_mac_to_phy(struct e1000_hw *hw) * registers depending on negotiated values. */ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, - &phy_data); + &phy_data); if (ret_val) return ret_val; @@ -2002,7 +2025,7 @@ static s32 e1000_config_mac_to_phy(struct e1000_hw *hw) if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) ctrl |= E1000_CTRL_SPD_1000; else if ((phy_data & M88E1000_PSSR_SPEED) == - M88E1000_PSSR_100MBS) + M88E1000_PSSR_100MBS) ctrl |= E1000_CTRL_SPD_100; } @@ -2135,9 +2158,9 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw) if (mii_status_reg & MII_SR_AUTONEG_COMPLETE) { /* The AutoNeg process has completed, so we now need to * read both the Auto Negotiation Advertisement Register - * (Address 4) and the Auto_Negotiation Base Page Ability - * Register (Address 5) to determine how flow control was - * negotiated. + * (Address 4) and the Auto_Negotiation Base Page + * Ability Register (Address 5) to determine how flow + * control was negotiated. */ ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV, &mii_nway_adv_reg); @@ -2148,18 +2171,19 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw) if (ret_val) return ret_val; - /* Two bits in the Auto Negotiation Advertisement Register - * (Address 4) and two bits in the Auto Negotiation Base - * Page Ability Register (Address 5) determine flow control - * for both the PHY and the link partner. The following - * table, taken out of the IEEE 802.3ab/D6.0 dated March 25, - * 1999, describes these PAUSE resolution bits and how flow - * control is determined based upon these settings. + /* Two bits in the Auto Negotiation Advertisement + * Register (Address 4) and two bits in the Auto + * Negotiation Base Page Ability Register (Address 5) + * determine flow control for both the PHY and the link + * partner. The following table, taken out of the IEEE + * 802.3ab/D6.0 dated March 25, 1999, describes these + * PAUSE resolution bits and how flow control is + * determined based upon these settings. * NOTE: DC = Don't Care * * LOCAL DEVICE | LINK PARTNER * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution - *-------|---------|-------|---------|-------------------- + *-------|---------|-------|---------|------------------ * 0 | 0 | DC | DC | E1000_FC_NONE * 0 | 1 | 0 | DC | E1000_FC_NONE * 0 | 1 | 1 | 0 | E1000_FC_NONE @@ -2178,17 +2202,18 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw) * * LOCAL DEVICE | LINK PARTNER * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result - *-------|---------|-------|---------|-------------------- + *-------|---------|-------|---------|------------------ * 1 | DC | 1 | DC | E1000_FC_FULL * */ if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) { - /* Now we need to check if the user selected RX ONLY - * of pause frames. In this case, we had to advertise - * FULL flow control because we could not advertise RX - * ONLY. Hence, we must now check to see if we need to - * turn OFF the TRANSMISSION of PAUSE frames. + /* Now we need to check if the user selected Rx + * ONLY of pause frames. In this case, we had + * to advertise FULL flow control because we + * could not advertise Rx ONLY. Hence, we must + * now check to see if we need to turn OFF the + * TRANSMISSION of PAUSE frames. */ if (hw->original_fc == E1000_FC_FULL) { hw->fc = E1000_FC_FULL; @@ -2203,7 +2228,7 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw) * * LOCAL DEVICE | LINK PARTNER * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result - *-------|---------|-------|---------|-------------------- + *-------|---------|-------|---------|------------------ * 0 | 1 | 1 | 1 | E1000_FC_TX_PAUSE * */ @@ -2220,7 +2245,7 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw) * * LOCAL DEVICE | LINK PARTNER * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result - *-------|---------|-------|---------|-------------------- + *-------|---------|-------|---------|------------------ * 1 | 1 | 0 | 1 | E1000_FC_RX_PAUSE * */ @@ -2233,25 +2258,27 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw) e_dbg ("Flow Control = RX PAUSE frames only.\n"); } - /* Per the IEEE spec, at this point flow control should be - * disabled. However, we want to consider that we could - * be connected to a legacy switch that doesn't advertise - * desired flow control, but can be forced on the link - * partner. So if we advertised no flow control, that is - * what we will resolve to. If we advertised some kind of - * receive capability (Rx Pause Only or Full Flow Control) - * and the link partner advertised none, we will configure - * ourselves to enable Rx Flow Control only. We can do - * this safely for two reasons: If the link partner really - * didn't want flow control enabled, and we enable Rx, no - * harm done since we won't be receiving any PAUSE frames - * anyway. If the intent on the link partner was to have - * flow control enabled, then by us enabling RX only, we - * can at least receive pause frames and process them. - * This is a good idea because in most cases, since we are - * predominantly a server NIC, more times than not we will - * be asked to delay transmission of packets than asking - * our link partner to pause transmission of frames. + /* Per the IEEE spec, at this point flow control should + * be disabled. However, we want to consider that we + * could be connected to a legacy switch that doesn't + * advertise desired flow control, but can be forced on + * the link partner. So if we advertised no flow + * control, that is what we will resolve to. If we + * advertised some kind of receive capability (Rx Pause + * Only or Full Flow Control) and the link partner + * advertised none, we will configure ourselves to + * enable Rx Flow Control only. We can do this safely + * for two reasons: If the link partner really + * didn't want flow control enabled, and we enable Rx, + * no harm done since we won't be receiving any PAUSE + * frames anyway. If the intent on the link partner was + * to have flow control enabled, then by us enabling Rx + * only, we can at least receive pause frames and + * process them. This is a good idea because in most + * cases, since we are predominantly a server NIC, more + * times than not we will be asked to delay transmission + * of packets than asking our link partner to pause + * transmission of frames. */ else if ((hw->original_fc == E1000_FC_NONE || hw->original_fc == E1000_FC_TX_PAUSE) || @@ -2316,8 +2343,7 @@ static s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw) status = er32(STATUS); rxcw = er32(RXCW); - /* - * If we don't have link (auto-negotiation failed or link partner + /* If we don't have link (auto-negotiation failed or link partner * cannot auto-negotiate), and our link partner is not trying to * auto-negotiate with us (we are receiving idles or data), * we need to force link up. We also need to give auto-negotiation @@ -2346,8 +2372,7 @@ static s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw) goto out; } } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) { - /* - * If we are forcing link and we are receiving /C/ ordered + /* If we are forcing link and we are receiving /C/ ordered * sets, re-enable auto-negotiation in the TXCW register * and disable forced link in the Device Control register * in an attempt to auto-negotiate with our link partner. @@ -2358,8 +2383,7 @@ static s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw) hw->serdes_has_link = true; } else if (!(E1000_TXCW_ANE & er32(TXCW))) { - /* - * If we force link for non-auto-negotiation switch, check + /* If we force link for non-auto-negotiation switch, check * link status based on MAC synchronization for internal * serdes media type. */ @@ -2468,15 +2492,17 @@ s32 e1000_check_for_link(struct e1000_hw *hw) if (phy_data & MII_SR_LINK_STATUS) { hw->get_link_status = false; - /* Check if there was DownShift, must be checked immediately after - * link-up */ + /* Check if there was DownShift, must be checked + * immediately after link-up + */ e1000_check_downshift(hw); /* If we are on 82544 or 82543 silicon and speed/duplex - * are forced to 10H or 10F, then we will implement the polarity - * reversal workaround. We disable interrupts first, and upon - * returning, place the devices interrupt state to its previous - * value except for the link status change interrupt which will + * are forced to 10H or 10F, then we will implement the + * polarity reversal workaround. We disable interrupts + * first, and upon returning, place the devices + * interrupt state to its previous value except for the + * link status change interrupt which will * happen due to the execution of this workaround. */ @@ -2527,9 +2553,10 @@ s32 e1000_check_for_link(struct e1000_hw *hw) } } - /* Configure Flow Control now that Auto-Neg has completed. First, we - * need to restore the desired flow control settings because we may - * have had to re-autoneg with a different link partner. + /* Configure Flow Control now that Auto-Neg has completed. + * First, we need to restore the desired flow control settings + * because we may have had to re-autoneg with a different link + * partner. */ ret_val = e1000_config_fc_after_link_up(hw); if (ret_val) { @@ -2538,11 +2565,12 @@ s32 e1000_check_for_link(struct e1000_hw *hw) } /* At this point we know that we are on copper and we have - * auto-negotiated link. These are conditions for checking the link - * partner capability register. We use the link speed to determine if - * TBI compatibility needs to be turned on or off. If the link is not - * at gigabit speed, then TBI compatibility is not needed. If we are - * at gigabit speed, we turn on TBI compatibility. + * auto-negotiated link. These are conditions for checking the + * link partner capability register. We use the link speed to + * determine if TBI compatibility needs to be turned on or off. + * If the link is not at gigabit speed, then TBI compatibility + * is not needed. If we are at gigabit speed, we turn on TBI + * compatibility. */ if (hw->tbi_compatibility_en) { u16 speed, duplex; @@ -2554,20 +2582,23 @@ s32 e1000_check_for_link(struct e1000_hw *hw) return ret_val; } if (speed != SPEED_1000) { - /* If link speed is not set to gigabit speed, we do not need - * to enable TBI compatibility. + /* If link speed is not set to gigabit speed, we + * do not need to enable TBI compatibility. */ if (hw->tbi_compatibility_on) { - /* If we previously were in the mode, turn it off. */ + /* If we previously were in the mode, + * turn it off. + */ rctl = er32(RCTL); rctl &= ~E1000_RCTL_SBP; ew32(RCTL, rctl); hw->tbi_compatibility_on = false; } } else { - /* If TBI compatibility is was previously off, turn it on. For - * compatibility with a TBI link partner, we will store bad - * packets. Some frames have an additional byte on the end and + /* If TBI compatibility is was previously off, + * turn it on. For compatibility with a TBI link + * partner, we will store bad packets. Some + * frames have an additional byte on the end and * will look like CRC errors to to the hardware. */ if (!hw->tbi_compatibility_on) { @@ -2629,9 +2660,9 @@ s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex) *duplex = FULL_DUPLEX; } - /* IGP01 PHY may advertise full duplex operation after speed downgrade even - * if it is operating at half duplex. Here we set the duplex settings to - * match the duplex in the link partner's capabilities. + /* IGP01 PHY may advertise full duplex operation after speed downgrade + * even if it is operating at half duplex. Here we set the duplex + * settings to match the duplex in the link partner's capabilities. */ if (hw->phy_type == e1000_phy_igp && hw->speed_downgraded) { ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_EXP, &phy_data); @@ -2697,8 +2728,8 @@ static s32 e1000_wait_autoneg(struct e1000_hw *hw) */ static void e1000_raise_mdi_clk(struct e1000_hw *hw, u32 *ctrl) { - /* Raise the clock input to the Management Data Clock (by setting the MDC - * bit), and then delay 10 microseconds. + /* Raise the clock input to the Management Data Clock (by setting the + * MDC bit), and then delay 10 microseconds. */ ew32(CTRL, (*ctrl | E1000_CTRL_MDC)); E1000_WRITE_FLUSH(); @@ -2712,8 +2743,8 @@ static void e1000_raise_mdi_clk(struct e1000_hw *hw, u32 *ctrl) */ static void e1000_lower_mdi_clk(struct e1000_hw *hw, u32 *ctrl) { - /* Lower the clock input to the Management Data Clock (by clearing the MDC - * bit), and then delay 10 microseconds. + /* Lower the clock input to the Management Data Clock (by clearing the + * MDC bit), and then delay 10 microseconds. */ ew32(CTRL, (*ctrl & ~E1000_CTRL_MDC)); E1000_WRITE_FLUSH(); @@ -2746,10 +2777,10 @@ static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, u32 data, u16 count) ctrl |= (E1000_CTRL_MDIO_DIR | E1000_CTRL_MDC_DIR); while (mask) { - /* A "1" is shifted out to the PHY by setting the MDIO bit to "1" and - * then raising and lowering the Management Data Clock. A "0" is - * shifted out to the PHY by setting the MDIO bit to "0" and then - * raising and lowering the clock. + /* A "1" is shifted out to the PHY by setting the MDIO bit to + * "1" and then raising and lowering the Management Data Clock. + * A "0" is shifted out to the PHY by setting the MDIO bit to + * "0" and then raising and lowering the clock. */ if (data & mask) ctrl |= E1000_CTRL_MDIO; @@ -2781,24 +2812,26 @@ static u16 e1000_shift_in_mdi_bits(struct e1000_hw *hw) u8 i; /* In order to read a register from the PHY, we need to shift in a total - * of 18 bits from the PHY. The first two bit (turnaround) times are used - * to avoid contention on the MDIO pin when a read operation is performed. - * These two bits are ignored by us and thrown away. Bits are "shifted in" - * by raising the input to the Management Data Clock (setting the MDC bit), - * and then reading the value of the MDIO bit. + * of 18 bits from the PHY. The first two bit (turnaround) times are + * used to avoid contention on the MDIO pin when a read operation is + * performed. These two bits are ignored by us and thrown away. Bits are + * "shifted in" by raising the input to the Management Data Clock + * (setting the MDC bit), and then reading the value of the MDIO bit. */ ctrl = er32(CTRL); - /* Clear MDIO_DIR (SWDPIO1) to indicate this bit is to be used as input. */ + /* Clear MDIO_DIR (SWDPIO1) to indicate this bit is to be used as + * input. + */ ctrl &= ~E1000_CTRL_MDIO_DIR; ctrl &= ~E1000_CTRL_MDIO; ew32(CTRL, ctrl); E1000_WRITE_FLUSH(); - /* Raise and Lower the clock before reading in the data. This accounts for - * the turnaround bits. The first clock occurred when we clocked out the - * last bit of the Register Address. + /* Raise and Lower the clock before reading in the data. This accounts + * for the turnaround bits. The first clock occurred when we clocked out + * the last bit of the Register Address. */ e1000_raise_mdi_clk(hw, &ctrl); e1000_lower_mdi_clk(hw, &ctrl); @@ -2870,8 +2903,8 @@ static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, if (hw->mac_type > e1000_82543) { /* Set up Op-code, Phy Address, and register address in the MDI - * Control register. The MAC will take care of interfacing with the - * PHY to retrieve the desired data. + * Control register. The MAC will take care of interfacing with + * the PHY to retrieve the desired data. */ if (hw->mac_type == e1000_ce4100) { mdic = ((reg_addr << E1000_MDIC_REG_SHIFT) | @@ -2929,31 +2962,32 @@ static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, *phy_data = (u16) mdic; } } else { - /* We must first send a preamble through the MDIO pin to signal the - * beginning of an MII instruction. This is done by sending 32 - * consecutive "1" bits. + /* We must first send a preamble through the MDIO pin to signal + * the beginning of an MII instruction. This is done by sending + * 32 consecutive "1" bits. */ e1000_shift_out_mdi_bits(hw, PHY_PREAMBLE, PHY_PREAMBLE_SIZE); /* Now combine the next few fields that are required for a read * operation. We use this method instead of calling the - * e1000_shift_out_mdi_bits routine five different times. The format of - * a MII read instruction consists of a shift out of 14 bits and is - * defined as follows: + * e1000_shift_out_mdi_bits routine five different times. The + * format of a MII read instruction consists of a shift out of + * 14 bits and is defined as follows: * <Preamble><SOF><Op Code><Phy Addr><Reg Addr> - * followed by a shift in of 18 bits. This first two bits shifted in - * are TurnAround bits used to avoid contention on the MDIO pin when a - * READ operation is performed. These two bits are thrown away - * followed by a shift in of 16 bits which contains the desired data. + * followed by a shift in of 18 bits. This first two bits + * shifted in are TurnAround bits used to avoid contention on + * the MDIO pin when a READ operation is performed. These two + * bits are thrown away followed by a shift in of 16 bits which + * contains the desired data. */ mdic = ((reg_addr) | (phy_addr << 5) | (PHY_OP_READ << 10) | (PHY_SOF << 12)); e1000_shift_out_mdi_bits(hw, mdic, 14); - /* Now that we've shifted out the read command to the MII, we need to - * "shift in" the 16-bit value (18 total bits) of the requested PHY - * register address. + /* Now that we've shifted out the read command to the MII, we + * need to "shift in" the 16-bit value (18 total bits) of the + * requested PHY register address. */ *phy_data = e1000_shift_in_mdi_bits(hw); } @@ -3060,18 +3094,18 @@ static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, } } } else { - /* We'll need to use the SW defined pins to shift the write command - * out to the PHY. We first send a preamble to the PHY to signal the - * beginning of the MII instruction. This is done by sending 32 - * consecutive "1" bits. + /* We'll need to use the SW defined pins to shift the write + * command out to the PHY. We first send a preamble to the PHY + * to signal the beginning of the MII instruction. This is done + * by sending 32 consecutive "1" bits. */ e1000_shift_out_mdi_bits(hw, PHY_PREAMBLE, PHY_PREAMBLE_SIZE); - /* Now combine the remaining required fields that will indicate a - * write operation. We use this method instead of calling the - * e1000_shift_out_mdi_bits routine for each field in the command. The - * format of a MII write instruction is as follows: - * <Preamble><SOF><Op Code><Phy Addr><Reg Addr><Turnaround><Data>. + /* Now combine the remaining required fields that will indicate + * a write operation. We use this method instead of calling the + * e1000_shift_out_mdi_bits routine for each field in the + * command. The format of a MII write instruction is as follows: + * <Preamble><SOF><OpCode><PhyAddr><RegAddr><Turnaround><Data>. */ mdic = ((PHY_TURNAROUND) | (reg_addr << 2) | (phy_addr << 7) | (PHY_OP_WRITE << 12) | (PHY_SOF << 14)); @@ -3100,10 +3134,10 @@ s32 e1000_phy_hw_reset(struct e1000_hw *hw) e_dbg("Resetting Phy...\n"); if (hw->mac_type > e1000_82543) { - /* Read the device control register and assert the E1000_CTRL_PHY_RST - * bit. Then, take it out of reset. + /* Read the device control register and assert the + * E1000_CTRL_PHY_RST bit. Then, take it out of reset. * For e1000 hardware, we delay for 10ms between the assert - * and deassert. + * and de-assert. */ ctrl = er32(CTRL); ew32(CTRL, ctrl | E1000_CTRL_PHY_RST); @@ -3115,8 +3149,9 @@ s32 e1000_phy_hw_reset(struct e1000_hw *hw) E1000_WRITE_FLUSH(); } else { - /* Read the Extended Device Control Register, assert the PHY_RESET_DIR - * bit to put the PHY into reset. Then, take it out of reset. + /* Read the Extended Device Control Register, assert the + * PHY_RESET_DIR bit to put the PHY into reset. Then, take it + * out of reset. */ ctrl_ext = er32(CTRL_EXT); ctrl_ext |= E1000_CTRL_EXT_SDP4_DIR; @@ -3301,7 +3336,8 @@ static s32 e1000_phy_igp_get_info(struct e1000_hw *hw, e_dbg("e1000_phy_igp_get_info"); /* The downshift status is checked only once, after link is established, - * and it stored in the hw->speed_downgraded parameter. */ + * and it stored in the hw->speed_downgraded parameter. + */ phy_info->downshift = (e1000_downshift) hw->speed_downgraded; /* IGP01E1000 does not need to support it. */ @@ -3327,7 +3363,9 @@ static s32 e1000_phy_igp_get_info(struct e1000_hw *hw, if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) == IGP01E1000_PSSR_SPEED_1000MBPS) { - /* Local/Remote Receiver Information are only valid at 1000 Mbps */ + /* Local/Remote Receiver Information are only valid @ 1000 + * Mbps + */ ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data); if (ret_val) return ret_val; @@ -3379,7 +3417,8 @@ static s32 e1000_phy_m88_get_info(struct e1000_hw *hw, e_dbg("e1000_phy_m88_get_info"); /* The downshift status is checked only once, after link is established, - * and it stored in the hw->speed_downgraded parameter. */ + * and it stored in the hw->speed_downgraded parameter. + */ phy_info->downshift = (e1000_downshift) hw->speed_downgraded; ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); @@ -3574,8 +3613,8 @@ s32 e1000_init_eeprom_params(struct e1000_hw *hw) } if (eeprom->type == e1000_eeprom_spi) { - /* eeprom_size will be an enum [0..8] that maps to eeprom sizes 128B to - * 32KB (incremented by powers of 2). + /* eeprom_size will be an enum [0..8] that maps to eeprom sizes + * 128B to 32KB (incremented by powers of 2). */ /* Set to default value for initial eeprom read. */ eeprom->word_size = 64; @@ -3585,8 +3624,9 @@ s32 e1000_init_eeprom_params(struct e1000_hw *hw) eeprom_size = (eeprom_size & EEPROM_SIZE_MASK) >> EEPROM_SIZE_SHIFT; /* 256B eeprom size was not supported in earlier hardware, so we - * bump eeprom_size up one to ensure that "1" (which maps to 256B) - * is never the result used in the shifting logic below. */ + * bump eeprom_size up one to ensure that "1" (which maps to + * 256B) is never the result used in the shifting logic below. + */ if (eeprom_size) eeprom_size++; @@ -3618,8 +3658,8 @@ static void e1000_raise_ee_clk(struct e1000_hw *hw, u32 *eecd) */ static void e1000_lower_ee_clk(struct e1000_hw *hw, u32 *eecd) { - /* Lower the clock input to the EEPROM (by clearing the SK bit), and then - * wait 50 microseconds. + /* Lower the clock input to the EEPROM (by clearing the SK bit), and + * then wait 50 microseconds. */ *eecd = *eecd & ~E1000_EECD_SK; ew32(EECD, *eecd); @@ -3651,10 +3691,11 @@ static void e1000_shift_out_ee_bits(struct e1000_hw *hw, u16 data, u16 count) eecd |= E1000_EECD_DO; } do { - /* A "1" is shifted out to the EEPROM by setting bit "DI" to a "1", - * and then raising and then lowering the clock (the SK bit controls - * the clock input to the EEPROM). A "0" is shifted out to the EEPROM - * by setting "DI" to "0" and then raising and then lowering the clock. + /* A "1" is shifted out to the EEPROM by setting bit "DI" to a + * "1", and then raising and then lowering the clock (the SK bit + * controls the clock input to the EEPROM). A "0" is shifted + * out to the EEPROM by setting "DI" to "0" and then raising and + * then lowering the clock. */ eecd &= ~E1000_EECD_DI; @@ -3691,9 +3732,9 @@ static u16 e1000_shift_in_ee_bits(struct e1000_hw *hw, u16 count) /* In order to read a register from the EEPROM, we need to shift 'count' * bits in from the EEPROM. Bits are "shifted in" by raising the clock - * input to the EEPROM (setting the SK bit), and then reading the value of - * the "DO" bit. During this "shifting in" process the "DI" bit should - * always be clear. + * input to the EEPROM (setting the SK bit), and then reading the value + * of the "DO" bit. During this "shifting in" process the "DI" bit + * should always be clear. */ eecd = er32(EECD); @@ -3945,8 +3986,8 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, if (eeprom->word_size == 0) e1000_init_eeprom_params(hw); - /* A check for invalid values: offset too large, too many words, and not - * enough words. + /* A check for invalid values: offset too large, too many words, and + * not enough words. */ if ((offset >= eeprom->word_size) || (words > eeprom->word_size - offset) || (words == 0)) { @@ -3964,7 +4005,8 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, return -E1000_ERR_EEPROM; /* Set up the SPI or Microwire EEPROM for bit-bang reading. We have - * acquired the EEPROM at this point, so any returns should release it */ + * acquired the EEPROM at this point, so any returns should release it + */ if (eeprom->type == e1000_eeprom_spi) { u16 word_in; u8 read_opcode = EEPROM_READ_OPCODE_SPI; @@ -3976,7 +4018,9 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, e1000_standby_eeprom(hw); - /* Some SPI eeproms use the 8th address bit embedded in the opcode */ + /* Some SPI eeproms use the 8th address bit embedded in the + * opcode + */ if ((eeprom->address_bits == 8) && (offset >= 128)) read_opcode |= EEPROM_A8_OPCODE_SPI; @@ -3985,11 +4029,13 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, e1000_shift_out_ee_bits(hw, (u16) (offset * 2), eeprom->address_bits); - /* Read the data. The address of the eeprom internally increments with - * each byte (spi) being read, saving on the overhead of eeprom setup - * and tear-down. The address counter will roll over if reading beyond - * the size of the eeprom, thus allowing the entire memory to be read - * starting from any offset. */ + /* Read the data. The address of the eeprom internally + * increments with each byte (spi) being read, saving on the + * overhead of eeprom setup and tear-down. The address counter + * will roll over if reading beyond the size of the eeprom, thus + * allowing the entire memory to be read starting from any + * offset. + */ for (i = 0; i < words; i++) { word_in = e1000_shift_in_ee_bits(hw, 16); data[i] = (word_in >> 8) | (word_in << 8); @@ -4003,8 +4049,9 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, e1000_shift_out_ee_bits(hw, (u16) (offset + i), eeprom->address_bits); - /* Read the data. For microwire, each word requires the overhead - * of eeprom setup and tear-down. */ + /* Read the data. For microwire, each word requires the + * overhead of eeprom setup and tear-down. + */ data[i] = e1000_shift_in_ee_bits(hw, 16); e1000_standby_eeprom(hw); } @@ -4119,8 +4166,8 @@ static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, if (eeprom->word_size == 0) e1000_init_eeprom_params(hw); - /* A check for invalid values: offset too large, too many words, and not - * enough words. + /* A check for invalid values: offset too large, too many words, and + * not enough words. */ if ((offset >= eeprom->word_size) || (words > eeprom->word_size - offset) || (words == 0)) { @@ -4174,7 +4221,9 @@ static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset, u16 words, e1000_standby_eeprom(hw); - /* Some SPI eeproms use the 8th address bit embedded in the opcode */ + /* Some SPI eeproms use the 8th address bit embedded in the + * opcode + */ if ((eeprom->address_bits == 8) && (offset >= 128)) write_opcode |= EEPROM_A8_OPCODE_SPI; @@ -4186,16 +4235,19 @@ static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset, u16 words, /* Send the data */ - /* Loop to allow for up to whole page write (32 bytes) of eeprom */ + /* Loop to allow for up to whole page write (32 bytes) of + * eeprom + */ while (widx < words) { u16 word_out = data[widx]; word_out = (word_out >> 8) | (word_out << 8); e1000_shift_out_ee_bits(hw, word_out, 16); widx++; - /* Some larger eeprom sizes are capable of a 32-byte PAGE WRITE - * operation, while the smaller eeproms are capable of an 8-byte - * PAGE WRITE operation. Break the inner loop to pass new address + /* Some larger eeprom sizes are capable of a 32-byte + * PAGE WRITE operation, while the smaller eeproms are + * capable of an 8-byte PAGE WRITE operation. Break the + * inner loop to pass new address */ if ((((offset + widx) * 2) % eeprom->page_size) == 0) { e1000_standby_eeprom(hw); @@ -4249,14 +4301,15 @@ static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset, /* Send the data */ e1000_shift_out_ee_bits(hw, data[words_written], 16); - /* Toggle the CS line. This in effect tells the EEPROM to execute - * the previous command. + /* Toggle the CS line. This in effect tells the EEPROM to + * execute the previous command. */ e1000_standby_eeprom(hw); - /* Read DO repeatedly until it is high (equal to '1'). The EEPROM will - * signal that the command has been completed by raising the DO signal. - * If DO does not go high in 10 milliseconds, then error out. + /* Read DO repeatedly until it is high (equal to '1'). The + * EEPROM will signal that the command has been completed by + * raising the DO signal. If DO does not go high in 10 + * milliseconds, then error out. */ for (i = 0; i < 200; i++) { eecd = er32(EECD); @@ -4483,7 +4536,8 @@ static void e1000_clear_vfta(struct e1000_hw *hw) for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) { /* If the offset we want to clear is the same offset of the * manageability VLAN ID, then clear all bits except that of the - * manageability unit */ + * manageability unit + */ vfta_value = (offset == vfta_offset) ? vfta_bit_in_reg : 0; E1000_WRITE_REG_ARRAY(hw, VFTA, offset, vfta_value); E1000_WRITE_FLUSH(); @@ -4911,12 +4965,12 @@ void e1000_tbi_adjust_stats(struct e1000_hw *hw, struct e1000_hw_stats *stats, * counters overcount this packet as a CRC error and undercount * the packet as a good packet */ - /* This packet should not be counted as a CRC error. */ + /* This packet should not be counted as a CRC error. */ stats->crcerrs--; - /* This packet does count as a Good Packet Received. */ + /* This packet does count as a Good Packet Received. */ stats->gprc++; - /* Adjust the Good Octets received counters */ + /* Adjust the Good Octets received counters */ carry_bit = 0x80000000 & stats->gorcl; stats->gorcl += frame_len; /* If the high bit of Gorcl (the low 32 bits of the Good Octets @@ -5196,8 +5250,9 @@ static s32 e1000_check_polarity(struct e1000_hw *hw, if (ret_val) return ret_val; - /* If speed is 1000 Mbps, must read the IGP01E1000_PHY_PCS_INIT_REG to - * find the polarity status */ + /* If speed is 1000 Mbps, must read the + * IGP01E1000_PHY_PCS_INIT_REG to find the polarity status + */ if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) == IGP01E1000_PSSR_SPEED_1000MBPS) { @@ -5213,8 +5268,9 @@ static s32 e1000_check_polarity(struct e1000_hw *hw, e1000_rev_polarity_reversed : e1000_rev_polarity_normal; } else { - /* For 10 Mbps, read the polarity bit in the status register. (for - * 100 Mbps this bit is always 0) */ + /* For 10 Mbps, read the polarity bit in the status + * register. (for 100 Mbps this bit is always 0) + */ *polarity = (phy_data & IGP01E1000_PSSR_POLARITY_REVERSED) ? e1000_rev_polarity_reversed : @@ -5374,8 +5430,9 @@ static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up) } } else { if (hw->dsp_config_state == e1000_dsp_config_activated) { - /* Save off the current value of register 0x2F5B to be restored at - * the end of the routines. */ + /* Save off the current value of register 0x2F5B to be + * restored at the end of the routines. + */ ret_val = e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data); @@ -5391,7 +5448,7 @@ static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up) msleep(20); ret_val = e1000_write_phy_reg(hw, 0x0000, - IGP01E1000_IEEE_FORCE_GIGA); + IGP01E1000_IEEE_FORCE_GIGA); if (ret_val) return ret_val; for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) { @@ -5412,7 +5469,7 @@ static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up) } ret_val = e1000_write_phy_reg(hw, 0x0000, - IGP01E1000_IEEE_RESTART_AUTONEG); + IGP01E1000_IEEE_RESTART_AUTONEG); if (ret_val) return ret_val; @@ -5429,8 +5486,9 @@ static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up) } if (hw->ffe_config_state == e1000_ffe_config_active) { - /* Save off the current value of register 0x2F5B to be restored at - * the end of the routines. */ + /* Save off the current value of register 0x2F5B to be + * restored at the end of the routines. + */ ret_val = e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data); @@ -5446,7 +5504,7 @@ static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up) msleep(20); ret_val = e1000_write_phy_reg(hw, 0x0000, - IGP01E1000_IEEE_FORCE_GIGA); + IGP01E1000_IEEE_FORCE_GIGA); if (ret_val) return ret_val; ret_val = @@ -5456,7 +5514,7 @@ static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up) return ret_val; ret_val = e1000_write_phy_reg(hw, 0x0000, - IGP01E1000_IEEE_RESTART_AUTONEG); + IGP01E1000_IEEE_RESTART_AUTONEG); if (ret_val) return ret_val; @@ -5542,8 +5600,9 @@ static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active) return E1000_SUCCESS; /* During driver activity LPLU should not be used or it will attain link - * from the lowest speeds starting from 10Mbps. The capability is used for - * Dx transitions and states */ + * from the lowest speeds starting from 10Mbps. The capability is used + * for Dx transitions and states + */ if (hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2) { ret_val = @@ -5563,10 +5622,11 @@ static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active) return ret_val; } - /* LPLU and SmartSpeed are mutually exclusive. LPLU is used during - * Dx states where the power conservation is most important. During - * driver activity we should enable SmartSpeed, so performance is - * maintained. */ + /* LPLU and SmartSpeed are mutually exclusive. LPLU is used + * during Dx states where the power conservation is most + * important. During driver activity we should enable + * SmartSpeed, so performance is maintained. + */ if (hw->smart_speed == e1000_smart_speed_on) { ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c index 294da56b824..8502c625dbe 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_main.c +++ b/drivers/net/ethernet/intel/e1000/e1000_main.c @@ -239,7 +239,6 @@ struct net_device *e1000_get_hw_dev(struct e1000_hw *hw) * e1000_init_module is the first routine called when the driver is * loaded. All it does is register with the PCI subsystem. **/ - static int __init e1000_init_module(void) { int ret; @@ -266,7 +265,6 @@ module_init(e1000_init_module); * e1000_exit_module is called just before the driver is removed * from memory. **/ - static void __exit e1000_exit_module(void) { pci_unregister_driver(&e1000_driver); @@ -301,7 +299,6 @@ static void e1000_free_irq(struct e1000_adapter *adapter) * e1000_irq_disable - Mask off interrupt generation on the NIC * @adapter: board private structure **/ - static void e1000_irq_disable(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; @@ -315,7 +312,6 @@ static void e1000_irq_disable(struct e1000_adapter *adapter) * e1000_irq_enable - Enable default interrupt generation settings * @adapter: board private structure **/ - static void e1000_irq_enable(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; @@ -398,11 +394,12 @@ static void e1000_configure(struct e1000_adapter *adapter) e1000_configure_rx(adapter); /* call E1000_DESC_UNUSED which always leaves * at least 1 descriptor unused to make sure - * next_to_use != next_to_clean */ + * next_to_use != next_to_clean + */ for (i = 0; i < adapter->num_rx_queues; i++) { struct e1000_rx_ring *ring = &adapter->rx_ring[i]; adapter->alloc_rx_buf(adapter, ring, - E1000_DESC_UNUSED(ring)); + E1000_DESC_UNUSED(ring)); } } @@ -433,9 +430,7 @@ int e1000_up(struct e1000_adapter *adapter) * The phy may be powered down to save power and turn off link when the * driver is unloaded and wake on lan is not enabled (among others) * *** this routine MUST be followed by a call to e1000_reset *** - * **/ - void e1000_power_up_phy(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; @@ -444,7 +439,8 @@ void e1000_power_up_phy(struct e1000_adapter *adapter) /* Just clear the power down bit to wake the phy back up */ if (hw->media_type == e1000_media_type_copper) { /* according to the manual, the phy will retain its - * settings across a power-down/up cycle */ + * settings across a power-down/up cycle + */ e1000_read_phy_reg(hw, PHY_CTRL, &mii_reg); mii_reg &= ~MII_CR_POWER_DOWN; e1000_write_phy_reg(hw, PHY_CTRL, mii_reg); @@ -459,7 +455,8 @@ static void e1000_power_down_phy(struct e1000_adapter *adapter) * The PHY cannot be powered down if any of the following is true * * (a) WoL is enabled * (b) AMT is active - * (c) SoL/IDER session is active */ + * (c) SoL/IDER session is active + */ if (!adapter->wol && hw->mac_type >= e1000_82540 && hw->media_type == e1000_media_type_copper) { u16 mii_reg = 0; @@ -529,8 +526,7 @@ void e1000_down(struct e1000_adapter *adapter) e1000_irq_disable(adapter); - /* - * Setting DOWN must be after irq_disable to prevent + /* Setting DOWN must be after irq_disable to prevent * a screaming interrupt. Setting DOWN also prevents * tasks from rescheduling. */ @@ -627,14 +623,14 @@ void e1000_reset(struct e1000_adapter *adapter) * rounded up to the next 1KB and expressed in KB. Likewise, * the Rx FIFO should be large enough to accommodate at least * one full receive packet and is similarly rounded up and - * expressed in KB. */ + * expressed in KB. + */ pba = er32(PBA); /* upper 16 bits has Tx packet buffer allocation size in KB */ tx_space = pba >> 16; /* lower 16 bits has Rx packet buffer allocation size in KB */ pba &= 0xffff; - /* - * the tx fifo also stores 16 bytes of information about the tx + /* the Tx fifo also stores 16 bytes of information about the Tx * but don't include ethernet FCS because hardware appends it */ min_tx_space = (hw->max_frame_size + @@ -649,7 +645,8 @@ void e1000_reset(struct e1000_adapter *adapter) /* If current Tx allocation is less than the min Tx FIFO size, * and the min Tx FIFO size is less than the current Rx FIFO - * allocation, take space away from current Rx allocation */ + * allocation, take space away from current Rx allocation + */ if (tx_space < min_tx_space && ((min_tx_space - tx_space) < pba)) { pba = pba - (min_tx_space - tx_space); @@ -663,8 +660,9 @@ void e1000_reset(struct e1000_adapter *adapter) break; } - /* if short on rx space, rx wins and must trump tx - * adjustment or use Early Receive if available */ + /* if short on Rx space, Rx wins and must trump Tx + * adjustment or use Early Receive if available + */ if (pba < min_rx_space) pba = min_rx_space; } @@ -672,8 +670,7 @@ void e1000_reset(struct e1000_adapter *adapter) ew32(PBA, pba); - /* - * flow control settings: + /* flow control settings: * The high water mark must be low enough to fit one full frame * (or the size used for early receive) above it in the Rx FIFO. * Set it to the lower of: @@ -707,7 +704,8 @@ void e1000_reset(struct e1000_adapter *adapter) u32 ctrl = er32(CTRL); /* clear phy power management bit if we are in gig only mode, * which if enabled will attempt negotiation to 100Mb, which - * can cause a loss of link at power off or driver unload */ + * can cause a loss of link at power off or driver unload + */ ctrl &= ~E1000_CTRL_SWDPIN3; ew32(CTRL, ctrl); } @@ -808,9 +806,8 @@ static int e1000_is_need_ioport(struct pci_dev *pdev) static netdev_features_t e1000_fix_features(struct net_device *netdev, netdev_features_t features) { - /* - * Since there is no support for separate rx/tx vlan accel - * enable/disable make sure tx flag is always in same state as rx. + /* Since there is no support for separate Rx/Tx vlan accel + * enable/disable make sure Tx flag is always in same state as Rx. */ if (features & NETIF_F_HW_VLAN_RX) features |= NETIF_F_HW_VLAN_TX; @@ -1012,16 +1009,14 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (err) goto err_sw_init; - /* - * there is a workaround being applied below that limits + /* there is a workaround being applied below that limits * 64-bit DMA addresses to 64-bit hardware. There are some * 32-bit adapters that Tx hang when given 64-bit DMA addresses */ pci_using_dac = 0; if ((hw->bus_type == e1000_bus_type_pcix) && !dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) { - /* - * according to DMA-API-HOWTO, coherent calls will always + /* according to DMA-API-HOWTO, coherent calls will always * succeed if the set call did */ dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); @@ -1099,7 +1094,8 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } /* before reading the EEPROM, reset the controller to - * put the device in a known good starting state */ + * put the device in a known good starting state + */ e1000_reset_hw(hw); @@ -1107,8 +1103,7 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (e1000_validate_eeprom_checksum(hw) < 0) { e_err(probe, "The EEPROM Checksum Is Not Valid\n"); e1000_dump_eeprom(adapter); - /* - * set MAC address to all zeroes to invalidate and temporary + /* set MAC address to all zeroes to invalidate and temporary * disable this device for the user. This blocks regular * traffic while still permitting ethtool ioctls from reaching * the hardware as well as allowing the user to run the @@ -1123,9 +1118,8 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } /* don't block initalization here due to bad MAC address */ memcpy(netdev->dev_addr, hw->mac_addr, netdev->addr_len); - memcpy(netdev->perm_addr, hw->mac_addr, netdev->addr_len); - if (!is_valid_ether_addr(netdev->perm_addr)) + if (!is_valid_ether_addr(netdev->dev_addr)) e_err(probe, "Invalid MAC Address\n"); @@ -1170,7 +1164,8 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* now that we have the eeprom settings, apply the special cases * where the eeprom may be wrong or the board simply won't support - * wake on lan on a particular port */ + * wake on lan on a particular port + */ switch (pdev->device) { case E1000_DEV_ID_82546GB_PCIE: adapter->eeprom_wol = 0; @@ -1178,7 +1173,8 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) case E1000_DEV_ID_82546EB_FIBER: case E1000_DEV_ID_82546GB_FIBER: /* Wake events only supported on port A for dual fiber - * regardless of eeprom setting */ + * regardless of eeprom setting + */ if (er32(STATUS) & E1000_STATUS_FUNC_1) adapter->eeprom_wol = 0; break; @@ -1271,7 +1267,6 @@ err_pci_reg: * Hot-Plug event, or because the driver is going to be removed from * memory. **/ - static void e1000_remove(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); @@ -1307,7 +1302,6 @@ static void e1000_remove(struct pci_dev *pdev) * e1000_sw_init initializes the Adapter private data structure. * e1000_init_hw_struct MUST be called before this function **/ - static int e1000_sw_init(struct e1000_adapter *adapter) { adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE; @@ -1338,7 +1332,6 @@ static int e1000_sw_init(struct e1000_adapter *adapter) * We allocate one ring per queue at run-time since we don't know the * number of queues at compile-time. **/ - static int e1000_alloc_queues(struct e1000_adapter *adapter) { adapter->tx_ring = kcalloc(adapter->num_tx_queues, @@ -1368,7 +1361,6 @@ static int e1000_alloc_queues(struct e1000_adapter *adapter) * handler is registered with the OS, the watchdog task is started, * and the stack is notified that the interface is ready. **/ - static int e1000_open(struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); @@ -1402,7 +1394,8 @@ static int e1000_open(struct net_device *netdev) /* before we allocate an interrupt, we must be ready to handle it. * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt * as soon as we call pci_request_irq, so we have to setup our - * clean_rx handler before we do so. */ + * clean_rx handler before we do so. + */ e1000_configure(adapter); err = e1000_request_irq(adapter); @@ -1445,7 +1438,6 @@ err_setup_tx: * needs to be disabled. A global MAC reset is issued to stop the * hardware, and all transmit and receive resources are freed. **/ - static int e1000_close(struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); @@ -1460,10 +1452,11 @@ static int e1000_close(struct net_device *netdev) e1000_free_all_rx_resources(adapter); /* kill manageability vlan ID if supported, but not if a vlan with - * the same ID is registered on the host OS (let 8021q kill it) */ + * the same ID is registered on the host OS (let 8021q kill it) + */ if ((hw->mng_cookie.status & - E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) && - !test_bit(adapter->mng_vlan_id, adapter->active_vlans)) { + E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) && + !test_bit(adapter->mng_vlan_id, adapter->active_vlans)) { e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id); } @@ -1484,7 +1477,8 @@ static bool e1000_check_64k_bound(struct e1000_adapter *adapter, void *start, unsigned long end = begin + len; /* First rev 82545 and 82546 need to not allow any memory - * write location to cross 64k boundary due to errata 23 */ + * write location to cross 64k boundary due to errata 23 + */ if (hw->mac_type == e1000_82545 || hw->mac_type == e1000_ce4100 || hw->mac_type == e1000_82546) { @@ -1501,7 +1495,6 @@ static bool e1000_check_64k_bound(struct e1000_adapter *adapter, void *start, * * Return 0 on success, negative on failure **/ - static int e1000_setup_tx_resources(struct e1000_adapter *adapter, struct e1000_tx_ring *txdr) { @@ -1510,11 +1503,8 @@ static int e1000_setup_tx_resources(struct e1000_adapter *adapter, size = sizeof(struct e1000_buffer) * txdr->count; txdr->buffer_info = vzalloc(size); - if (!txdr->buffer_info) { - e_err(probe, "Unable to allocate memory for the Tx descriptor " - "ring\n"); + if (!txdr->buffer_info) return -ENOMEM; - } /* round up to nearest 4K */ @@ -1578,7 +1568,6 @@ setup_tx_desc_die: * * Return 0 on success, negative on failure **/ - int e1000_setup_all_tx_resources(struct e1000_adapter *adapter) { int i, err = 0; @@ -1603,7 +1592,6 @@ int e1000_setup_all_tx_resources(struct e1000_adapter *adapter) * * Configure the Tx unit of the MAC after a reset. **/ - static void e1000_configure_tx(struct e1000_adapter *adapter) { u64 tdba; @@ -1624,8 +1612,10 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) ew32(TDBAL, (tdba & 0x00000000ffffffffULL)); ew32(TDT, 0); ew32(TDH, 0); - adapter->tx_ring[0].tdh = ((hw->mac_type >= e1000_82543) ? E1000_TDH : E1000_82542_TDH); - adapter->tx_ring[0].tdt = ((hw->mac_type >= e1000_82543) ? E1000_TDT : E1000_82542_TDT); + adapter->tx_ring[0].tdh = ((hw->mac_type >= e1000_82543) ? + E1000_TDH : E1000_82542_TDH); + adapter->tx_ring[0].tdt = ((hw->mac_type >= e1000_82543) ? + E1000_TDT : E1000_82542_TDT); break; } @@ -1680,7 +1670,8 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) adapter->txd_cmd |= E1000_TXD_CMD_RS; /* Cache if we're 82544 running in PCI-X because we'll - * need this to apply a workaround later in the send path. */ + * need this to apply a workaround later in the send path. + */ if (hw->mac_type == e1000_82544 && hw->bus_type == e1000_bus_type_pcix) adapter->pcix_82544 = true; @@ -1696,7 +1687,6 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) * * Returns 0 on success, negative on failure **/ - static int e1000_setup_rx_resources(struct e1000_adapter *adapter, struct e1000_rx_ring *rxdr) { @@ -1705,11 +1695,8 @@ static int e1000_setup_rx_resources(struct e1000_adapter *adapter, size = sizeof(struct e1000_buffer) * rxdr->count; rxdr->buffer_info = vzalloc(size); - if (!rxdr->buffer_info) { - e_err(probe, "Unable to allocate memory for the Rx descriptor " - "ring\n"); + if (!rxdr->buffer_info) return -ENOMEM; - } desc_len = sizeof(struct e1000_rx_desc); @@ -1778,7 +1765,6 @@ setup_rx_desc_die: * * Return 0 on success, negative on failure **/ - int e1000_setup_all_rx_resources(struct e1000_adapter *adapter) { int i, err = 0; @@ -1847,7 +1833,8 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter) /* This is useful for sniffing bad packets. */ if (adapter->netdev->features & NETIF_F_RXALL) { /* UPE and MPE will be handled by normal PROMISC logic - * in e1000e_set_rx_mode */ + * in e1000e_set_rx_mode + */ rctl |= (E1000_RCTL_SBP | /* Receive bad packets */ E1000_RCTL_BAM | /* RX All Bcast Pkts */ E1000_RCTL_PMCF); /* RX All MAC Ctrl Pkts */ @@ -1869,7 +1856,6 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter) * * Configure the Rx unit of the MAC after a reset. **/ - static void e1000_configure_rx(struct e1000_adapter *adapter) { u64 rdba; @@ -1902,7 +1888,8 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) } /* Setup the HW Rx Head and Tail Descriptor Pointers and - * the Base and Length of the Rx Descriptor Ring */ + * the Base and Length of the Rx Descriptor Ring + */ switch (adapter->num_rx_queues) { case 1: default: @@ -1912,8 +1899,10 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) ew32(RDBAL, (rdba & 0x00000000ffffffffULL)); ew32(RDT, 0); ew32(RDH, 0); - adapter->rx_ring[0].rdh = ((hw->mac_type >= e1000_82543) ? E1000_RDH : E1000_82542_RDH); - adapter->rx_ring[0].rdt = ((hw->mac_type >= e1000_82543) ? E1000_RDT : E1000_82542_RDT); + adapter->rx_ring[0].rdh = ((hw->mac_type >= e1000_82543) ? + E1000_RDH : E1000_82542_RDH); + adapter->rx_ring[0].rdt = ((hw->mac_type >= e1000_82543) ? + E1000_RDT : E1000_82542_RDT); break; } @@ -1939,7 +1928,6 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) * * Free all transmit software resources **/ - static void e1000_free_tx_resources(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring) { @@ -1962,7 +1950,6 @@ static void e1000_free_tx_resources(struct e1000_adapter *adapter, * * Free all transmit software resources **/ - void e1000_free_all_tx_resources(struct e1000_adapter *adapter) { int i; @@ -1997,7 +1984,6 @@ static void e1000_unmap_and_free_tx_resource(struct e1000_adapter *adapter, * @adapter: board private structure * @tx_ring: ring to be cleaned **/ - static void e1000_clean_tx_ring(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring) { @@ -2033,7 +2019,6 @@ static void e1000_clean_tx_ring(struct e1000_adapter *adapter, * e1000_clean_all_tx_rings - Free Tx Buffers for all queues * @adapter: board private structure **/ - static void e1000_clean_all_tx_rings(struct e1000_adapter *adapter) { int i; @@ -2049,7 +2034,6 @@ static void e1000_clean_all_tx_rings(struct e1000_adapter *adapter) * * Free all receive software resources **/ - static void e1000_free_rx_resources(struct e1000_adapter *adapter, struct e1000_rx_ring *rx_ring) { @@ -2072,7 +2056,6 @@ static void e1000_free_rx_resources(struct e1000_adapter *adapter, * * Free all receive software resources **/ - void e1000_free_all_rx_resources(struct e1000_adapter *adapter) { int i; @@ -2086,7 +2069,6 @@ void e1000_free_all_rx_resources(struct e1000_adapter *adapter) * @adapter: board private structure * @rx_ring: ring to free buffers from **/ - static void e1000_clean_rx_ring(struct e1000_adapter *adapter, struct e1000_rx_ring *rx_ring) { @@ -2145,7 +2127,6 @@ static void e1000_clean_rx_ring(struct e1000_adapter *adapter, * e1000_clean_all_rx_rings - Free Rx Buffers for all queues * @adapter: board private structure **/ - static void e1000_clean_all_rx_rings(struct e1000_adapter *adapter) { int i; @@ -2205,7 +2186,6 @@ static void e1000_leave_82542_rst(struct e1000_adapter *adapter) * * Returns 0 on success, negative on failure **/ - static int e1000_set_mac(struct net_device *netdev, void *p) { struct e1000_adapter *adapter = netdev_priv(netdev); @@ -2240,7 +2220,6 @@ static int e1000_set_mac(struct net_device *netdev, void *p) * responsible for configuring the hardware for proper unicast, multicast, * promiscuous mode, and all-multi behavior. **/ - static void e1000_set_rx_mode(struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); @@ -2253,10 +2232,8 @@ static void e1000_set_rx_mode(struct net_device *netdev) int mta_reg_count = E1000_NUM_MTA_REGISTERS; u32 *mcarray = kcalloc(mta_reg_count, sizeof(u32), GFP_ATOMIC); - if (!mcarray) { - e_err(probe, "memory allocation failed\n"); + if (!mcarray) return; - } /* Check for Promiscuous and All Multicast modes */ @@ -2326,10 +2303,10 @@ static void e1000_set_rx_mode(struct net_device *netdev) } /* write the hash table completely, write from bottom to avoid - * both stupid write combining chipsets, and flushing each write */ + * both stupid write combining chipsets, and flushing each write + */ for (i = mta_reg_count - 1; i >= 0 ; i--) { - /* - * If we are on an 82544 has an errata where writing odd + /* If we are on an 82544 has an errata where writing odd * offsets overwrites the previous even offset, but writing * backwards over the range solves the issue by always * writing the odd offset first @@ -2467,8 +2444,8 @@ static void e1000_watchdog(struct work_struct *work) bool txb2b = true; /* update snapshot of PHY registers on LSC */ e1000_get_speed_and_duplex(hw, - &adapter->link_speed, - &adapter->link_duplex); + &adapter->link_speed, + &adapter->link_duplex); ctrl = er32(CTRL); pr_info("%s NIC Link is Up %d Mbps %s, " @@ -2542,7 +2519,8 @@ link_up: /* We've lost link, so the controller stops DMA, * but we've got queued Tx work that's never going * to get done, so reset controller to flush Tx. - * (Do the reset outside of interrupt context). */ + * (Do the reset outside of interrupt context). + */ adapter->tx_timeout_count++; schedule_work(&adapter->reset_task); /* exit immediately since reset is imminent */ @@ -2552,8 +2530,7 @@ link_up: /* Simple mode for Interrupt Throttle Rate (ITR) */ if (hw->mac_type >= e1000_82540 && adapter->itr_setting == 4) { - /* - * Symmetric Tx/Rx gets a reduced ITR=2000; + /* Symmetric Tx/Rx gets a reduced ITR=2000; * Total asymmetrical Tx or Rx gets ITR=8000; * everyone else is between 2000-8000. */ @@ -2668,18 +2645,16 @@ static void e1000_set_itr(struct e1000_adapter *adapter) goto set_itr_now; } - adapter->tx_itr = e1000_update_itr(adapter, - adapter->tx_itr, - adapter->total_tx_packets, - adapter->total_tx_bytes); + adapter->tx_itr = e1000_update_itr(adapter, adapter->tx_itr, + adapter->total_tx_packets, + adapter->total_tx_bytes); /* conservative mode (itr 3) eliminates the lowest_latency setting */ if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency) adapter->tx_itr = low_latency; - adapter->rx_itr = e1000_update_itr(adapter, - adapter->rx_itr, - adapter->total_rx_packets, - adapter->total_rx_bytes); + adapter->rx_itr = e1000_update_itr(adapter, adapter->rx_itr, + adapter->total_rx_packets, + adapter->total_rx_bytes); /* conservative mode (itr 3) eliminates the lowest_latency setting */ if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency) adapter->rx_itr = low_latency; @@ -2705,10 +2680,11 @@ set_itr_now: if (new_itr != adapter->itr) { /* this attempts to bias the interrupt rate towards Bulk * by adding intermediate steps when interrupt rate is - * increasing */ + * increasing + */ new_itr = new_itr > adapter->itr ? - min(adapter->itr + (new_itr >> 2), new_itr) : - new_itr; + min(adapter->itr + (new_itr >> 2), new_itr) : + new_itr; adapter->itr = new_itr; ew32(ITR, 1000000000 / (new_itr * 256)); } @@ -2870,7 +2846,8 @@ static int e1000_tx_map(struct e1000_adapter *adapter, /* Workaround for Controller erratum -- * descriptor for non-tso packet in a linear SKB that follows a * tso gets written back prematurely before the data is fully - * DMA'd to the controller */ + * DMA'd to the controller + */ if (!skb->data_len && tx_ring->last_tx_tso && !skb_is_gso(skb)) { tx_ring->last_tx_tso = false; @@ -2878,7 +2855,8 @@ static int e1000_tx_map(struct e1000_adapter *adapter, } /* Workaround for premature desc write-backs - * in TSO mode. Append 4-byte sentinel desc */ + * in TSO mode. Append 4-byte sentinel desc + */ if (unlikely(mss && !nr_frags && size == len && size > 8)) size -= 4; /* work-around for errata 10 and it applies @@ -2891,7 +2869,8 @@ static int e1000_tx_map(struct e1000_adapter *adapter, size = 2015; /* Workaround for potential 82544 hang in PCI-X. Avoid - * terminating buffers within evenly-aligned dwords. */ + * terminating buffers within evenly-aligned dwords. + */ if (unlikely(adapter->pcix_82544 && !((unsigned long)(skb->data + offset + size - 1) & 4) && size > 4)) @@ -2903,7 +2882,7 @@ static int e1000_tx_map(struct e1000_adapter *adapter, buffer_info->mapped_as_page = false; buffer_info->dma = dma_map_single(&pdev->dev, skb->data + offset, - size, DMA_TO_DEVICE); + size, DMA_TO_DEVICE); if (dma_mapping_error(&pdev->dev, buffer_info->dma)) goto dma_error; buffer_info->next_to_watch = i; @@ -2934,12 +2913,15 @@ static int e1000_tx_map(struct e1000_adapter *adapter, buffer_info = &tx_ring->buffer_info[i]; size = min(len, max_per_txd); /* Workaround for premature desc write-backs - * in TSO mode. Append 4-byte sentinel desc */ - if (unlikely(mss && f == (nr_frags-1) && size == len && size > 8)) + * in TSO mode. Append 4-byte sentinel desc + */ + if (unlikely(mss && f == (nr_frags-1) && + size == len && size > 8)) size -= 4; /* Workaround for potential 82544 hang in PCI-X. * Avoid terminating buffers within evenly-aligned - * dwords. */ + * dwords. + */ bufend = (unsigned long) page_to_phys(skb_frag_page(frag)); bufend += offset + size - 1; @@ -3003,7 +2985,7 @@ static void e1000_tx_queue(struct e1000_adapter *adapter, if (likely(tx_flags & E1000_TX_FLAGS_TSO)) { txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D | - E1000_TXD_CMD_TSE; + E1000_TXD_CMD_TSE; txd_upper |= E1000_TXD_POPTS_TXSM << 8; if (likely(tx_flags & E1000_TX_FLAGS_IPV4)) @@ -3044,13 +3026,15 @@ static void e1000_tx_queue(struct e1000_adapter *adapter, /* Force memory writes to complete before letting h/w * know there are new descriptors to fetch. (Only * applicable for weak-ordered memory model archs, - * such as IA-64). */ + * such as IA-64). + */ wmb(); tx_ring->next_to_use = i; writel(i, hw->hw_addr + tx_ring->tdt); /* we need this if more than one processor can write to our tail - * at a time, it syncronizes IO on IA64/Altix systems */ + * at a time, it synchronizes IO on IA64/Altix systems + */ mmiowb(); } @@ -3099,11 +3083,13 @@ static int __e1000_maybe_stop_tx(struct net_device *netdev, int size) netif_stop_queue(netdev); /* Herbert's original patch had: * smp_mb__after_netif_stop_queue(); - * but since that doesn't exist yet, just open code it. */ + * but since that doesn't exist yet, just open code it. + */ smp_mb(); /* We need to check again in a case another CPU has just - * made room available. */ + * made room available. + */ if (likely(E1000_DESC_UNUSED(tx_ring) < size)) return -EBUSY; @@ -3114,7 +3100,7 @@ static int __e1000_maybe_stop_tx(struct net_device *netdev, int size) } static int e1000_maybe_stop_tx(struct net_device *netdev, - struct e1000_tx_ring *tx_ring, int size) + struct e1000_tx_ring *tx_ring, int size) { if (likely(E1000_DESC_UNUSED(tx_ring) >= size)) return 0; @@ -3138,10 +3124,11 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, int tso; unsigned int f; - /* This goes back to the question of how to logically map a tx queue + /* This goes back to the question of how to logically map a Tx queue * to a flow. Right now, performance is impacted slightly negatively - * if using multiple tx queues. If the stack breaks away from a - * single qdisc implementation, we can look at this again. */ + * if using multiple Tx queues. If the stack breaks away from a + * single qdisc implementation, we can look at this again. + */ tx_ring = adapter->tx_ring; if (unlikely(skb->len <= 0)) { @@ -3166,7 +3153,8 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, * initiating the DMA for each buffer. The calc is: * 4 = ceil(buffer len/mss). To make sure we don't * overrun the FIFO, adjust the max buffer len if mss - * drops. */ + * drops. + */ if (mss) { u8 hdr_len; max_per_txd = min(mss << 2, max_per_txd); @@ -3182,8 +3170,10 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, * this hardware's requirements * NOTE: this is a TSO only workaround * if end byte alignment not correct move us - * into the next dword */ - if ((unsigned long)(skb_tail_pointer(skb) - 1) & 4) + * into the next dword + */ + if ((unsigned long)(skb_tail_pointer(skb) - 1) + & 4) break; /* fall through */ pull_size = min((unsigned int)4, skb->data_len); @@ -3231,7 +3221,8 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, count += nr_frags; /* need: count + 2 desc gap to keep tail from touching - * head, otherwise try next time */ + * head, otherwise try next time + */ if (unlikely(e1000_maybe_stop_tx(netdev, tx_ring, count + 2))) return NETDEV_TX_BUSY; @@ -3270,7 +3261,7 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, tx_flags |= E1000_TX_FLAGS_NO_FCS; count = e1000_tx_map(adapter, tx_ring, skb, first, max_per_txd, - nr_frags, mss); + nr_frags, mss); if (count) { netdev_sent_queue(netdev, skb->len); @@ -3372,9 +3363,7 @@ static void e1000_dump(struct e1000_adapter *adapter) /* Print Registers */ e1000_regdump(adapter); - /* - * transmit dump - */ + /* transmit dump */ pr_info("TX Desc ring0 dump\n"); /* Transmit Descriptor Formats - DEXT[29] is 0 (Legacy) or 1 (Extended) @@ -3435,9 +3424,7 @@ static void e1000_dump(struct e1000_adapter *adapter) } rx_ring_summary: - /* - * receive dump - */ + /* receive dump */ pr_info("\nRX Desc ring dump\n"); /* Legacy Receive Descriptor Format @@ -3502,7 +3489,6 @@ exit: * e1000_tx_timeout - Respond to a Tx Hang * @netdev: network interface device structure **/ - static void e1000_tx_timeout(struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); @@ -3530,7 +3516,6 @@ static void e1000_reset_task(struct work_struct *work) * Returns the address of the device statistics structure. * The statistics are actually updated from the watchdog. **/ - static struct net_device_stats *e1000_get_stats(struct net_device *netdev) { /* only return the current stats */ @@ -3544,7 +3529,6 @@ static struct net_device_stats *e1000_get_stats(struct net_device *netdev) * * Returns 0 on success, negative on failure **/ - static int e1000_change_mtu(struct net_device *netdev, int new_mtu) { struct e1000_adapter *adapter = netdev_priv(netdev); @@ -3581,8 +3565,9 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) * means we reserve 2 more, this pushes us to allocate from the next * larger slab size. * i.e. RXBUFFER_2048 --> size-4096 slab - * however with the new *_jumbo_rx* routines, jumbo receives will use - * fragmented skbs */ + * however with the new *_jumbo_rx* routines, jumbo receives will use + * fragmented skbs + */ if (max_frame <= E1000_RXBUFFER_2048) adapter->rx_buffer_len = E1000_RXBUFFER_2048; @@ -3617,7 +3602,6 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) * e1000_update_stats - Update the board statistics counters * @adapter: board private structure **/ - void e1000_update_stats(struct e1000_adapter *adapter) { struct net_device *netdev = adapter->netdev; @@ -3628,8 +3612,7 @@ void e1000_update_stats(struct e1000_adapter *adapter) #define PHY_IDLE_ERROR_COUNT_MASK 0x00FF - /* - * Prevent stats update while adapter is being reset, or if the pci + /* Prevent stats update while adapter is being reset, or if the pci * connection is down. */ if (adapter->link_speed == 0) @@ -3719,7 +3702,8 @@ void e1000_update_stats(struct e1000_adapter *adapter) /* Rx Errors */ /* RLEC on some newer hardware can be incorrect so build - * our own version based on RUC and ROC */ + * our own version based on RUC and ROC + */ netdev->stats.rx_errors = adapter->stats.rxerrc + adapter->stats.crcerrs + adapter->stats.algnerrc + adapter->stats.ruc + adapter->stats.roc + @@ -3773,7 +3757,6 @@ void e1000_update_stats(struct e1000_adapter *adapter) * @irq: interrupt number * @data: pointer to a network interface device structure **/ - static irqreturn_t e1000_intr(int irq, void *data) { struct net_device *netdev = data; @@ -3784,8 +3767,7 @@ static irqreturn_t e1000_intr(int irq, void *data) if (unlikely((!icr))) return IRQ_NONE; /* Not our interrupt */ - /* - * we might have caused the interrupt, but the above + /* we might have caused the interrupt, but the above * read cleared it, and just in case the driver is * down there is nothing to do so return handled */ @@ -3811,7 +3793,8 @@ static irqreturn_t e1000_intr(int irq, void *data) __napi_schedule(&adapter->napi); } else { /* this really should not happen! if it does it is basically a - * bug, but not a hard error, so enable ints and continue */ + * bug, but not a hard error, so enable ints and continue + */ if (!test_bit(__E1000_DOWN, &adapter->flags)) e1000_irq_enable(adapter); } @@ -3825,7 +3808,8 @@ static irqreturn_t e1000_intr(int irq, void *data) **/ static int e1000_clean(struct napi_struct *napi, int budget) { - struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi); + struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, + napi); int tx_clean_complete = 0, work_done = 0; tx_clean_complete = e1000_clean_tx_irq(adapter, &adapter->tx_ring[0]); @@ -3916,11 +3900,12 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter, if (adapter->detect_tx_hung) { /* Detect a transmit hang in hardware, this serializes the - * check with the clearing of time_stamp and movement of i */ + * check with the clearing of time_stamp and movement of i + */ adapter->detect_tx_hung = false; if (tx_ring->buffer_info[eop].time_stamp && time_after(jiffies, tx_ring->buffer_info[eop].time_stamp + - (adapter->tx_timeout_factor * HZ)) && + (adapter->tx_timeout_factor * HZ)) && !(er32(STATUS) & E1000_STATUS_TXOFF)) { /* detected Tx unit hang */ @@ -3963,7 +3948,6 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter, * @csum: receive descriptor csum field * @sk_buff: socket buffer with received data **/ - static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err, u32 csum, struct sk_buff *skb) { @@ -3999,7 +3983,7 @@ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err, * e1000_consume_page - helper function **/ static void e1000_consume_page(struct e1000_buffer *bi, struct sk_buff *skb, - u16 length) + u16 length) { bi->page = NULL; skb->len += length; @@ -4095,11 +4079,11 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter, if (TBI_ACCEPT(hw, status, rx_desc->errors, length, last_byte)) { spin_lock_irqsave(&adapter->stats_lock, - irq_flags); + irq_flags); e1000_tbi_adjust_stats(hw, &adapter->stats, length, mapped); spin_unlock_irqrestore(&adapter->stats_lock, - irq_flags); + irq_flags); length--; } else { if (netdev->features & NETIF_F_RXALL) @@ -4107,7 +4091,8 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter, /* recycle both page and skb */ buffer_info->skb = skb; /* an error means any chain goes out the window - * too */ + * too + */ if (rx_ring->rx_skb_top) dev_kfree_skb(rx_ring->rx_skb_top); rx_ring->rx_skb_top = NULL; @@ -4123,7 +4108,7 @@ process_skb: /* this is the beginning of a chain */ rxtop = skb; skb_fill_page_desc(rxtop, 0, buffer_info->page, - 0, length); + 0, length); } else { /* this is the middle of a chain */ skb_fill_page_desc(rxtop, @@ -4141,38 +4126,42 @@ process_skb: skb_shinfo(rxtop)->nr_frags, buffer_info->page, 0, length); /* re-use the current skb, we only consumed the - * page */ + * page + */ buffer_info->skb = skb; skb = rxtop; rxtop = NULL; e1000_consume_page(buffer_info, skb, length); } else { /* no chain, got EOP, this buf is the packet - * copybreak to save the put_page/alloc_page */ + * copybreak to save the put_page/alloc_page + */ if (length <= copybreak && skb_tailroom(skb) >= length) { u8 *vaddr; vaddr = kmap_atomic(buffer_info->page); - memcpy(skb_tail_pointer(skb), vaddr, length); + memcpy(skb_tail_pointer(skb), vaddr, + length); kunmap_atomic(vaddr); /* re-use the page, so don't erase - * buffer_info->page */ + * buffer_info->page + */ skb_put(skb, length); } else { skb_fill_page_desc(skb, 0, - buffer_info->page, 0, - length); + buffer_info->page, 0, + length); e1000_consume_page(buffer_info, skb, - length); + length); } } } /* Receive Checksum Offload XXX recompute due to CRC strip? */ e1000_rx_checksum(adapter, - (u32)(status) | - ((u32)(rx_desc->errors) << 24), - le16_to_cpu(rx_desc->csum), skb); + (u32)(status) | + ((u32)(rx_desc->errors) << 24), + le16_to_cpu(rx_desc->csum), skb); total_rx_bytes += (skb->len - 4); /* don't count FCS */ if (likely(!(netdev->features & NETIF_F_RXFCS))) @@ -4214,8 +4203,7 @@ next_desc: return cleaned; } -/* - * this should improve performance for small packets with large amounts +/* this should improve performance for small packets with large amounts * of reassembly being done in the stack */ static void e1000_check_copybreak(struct net_device *netdev, @@ -4319,9 +4307,9 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, last_byte)) { spin_lock_irqsave(&adapter->stats_lock, flags); e1000_tbi_adjust_stats(hw, &adapter->stats, - length, skb->data); + length, skb->data); spin_unlock_irqrestore(&adapter->stats_lock, - flags); + flags); length--; } else { if (netdev->features & NETIF_F_RXALL) @@ -4386,10 +4374,9 @@ next_desc: * @rx_ring: pointer to receive ring structure * @cleaned_count: number of buffers to allocate this pass **/ - static void e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter, - struct e1000_rx_ring *rx_ring, int cleaned_count) + struct e1000_rx_ring *rx_ring, int cleaned_count) { struct net_device *netdev = adapter->netdev; struct pci_dev *pdev = adapter->pdev; @@ -4430,7 +4417,7 @@ check_page: if (!buffer_info->dma) { buffer_info->dma = dma_map_page(&pdev->dev, - buffer_info->page, 0, + buffer_info->page, 0, buffer_info->length, DMA_FROM_DEVICE); if (dma_mapping_error(&pdev->dev, buffer_info->dma)) { @@ -4460,7 +4447,8 @@ check_page: /* Force memory writes to complete before letting h/w * know there are new descriptors to fetch. (Only * applicable for weak-ordered memory model archs, - * such as IA-64). */ + * such as IA-64). + */ wmb(); writel(i, adapter->hw.hw_addr + rx_ring->rdt); } @@ -4470,7 +4458,6 @@ check_page: * e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended * @adapter: address of board private structure **/ - static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter, struct e1000_rx_ring *rx_ring, int cleaned_count) @@ -4541,8 +4528,7 @@ map_skb: break; /* while !buffer_info->skb */ } - /* - * XXX if it was allocated cleanly it will never map to a + /* XXX if it was allocated cleanly it will never map to a * boundary crossing */ @@ -4580,7 +4566,8 @@ map_skb: /* Force memory writes to complete before letting h/w * know there are new descriptors to fetch. (Only * applicable for weak-ordered memory model archs, - * such as IA-64). */ + * such as IA-64). + */ wmb(); writel(i, hw->hw_addr + rx_ring->rdt); } @@ -4590,7 +4577,6 @@ map_skb: * e1000_smartspeed - Workaround for SmartSpeed on 82541 and 82547 controllers. * @adapter: **/ - static void e1000_smartspeed(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; @@ -4603,7 +4589,8 @@ static void e1000_smartspeed(struct e1000_adapter *adapter) if (adapter->smartspeed == 0) { /* If Master/Slave config fault is asserted twice, - * we assume back-to-back */ + * we assume back-to-back + */ e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_status); if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return; e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_status); @@ -4616,7 +4603,7 @@ static void e1000_smartspeed(struct e1000_adapter *adapter) adapter->smartspeed++; if (!e1000_phy_setup_autoneg(hw) && !e1000_read_phy_reg(hw, PHY_CTRL, - &phy_ctrl)) { + &phy_ctrl)) { phy_ctrl |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG); e1000_write_phy_reg(hw, PHY_CTRL, @@ -4647,7 +4634,6 @@ static void e1000_smartspeed(struct e1000_adapter *adapter) * @ifreq: * @cmd: **/ - static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) { switch (cmd) { @@ -4666,7 +4652,6 @@ static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) * @ifreq: * @cmd: **/ - static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) { @@ -4928,7 +4913,8 @@ int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx) hw->autoneg = 0; /* Make sure dplx is at most 1 bit and lsb of speed is not set - * for the switch() below to work */ + * for the switch() below to work + */ if ((spd & 1) || (dplx & ~1)) goto err_inval; @@ -5131,8 +5117,7 @@ static void e1000_shutdown(struct pci_dev *pdev) } #ifdef CONFIG_NET_POLL_CONTROLLER -/* - * Polling 'interrupt' - used by things like netconsole to send skbs +/* Polling 'interrupt' - used by things like netconsole to send skbs * without having to re-enable interrupts. It's not called while * the interrupt routine is executing. */ diff --git a/drivers/net/ethernet/intel/e1000/e1000_param.c b/drivers/net/ethernet/intel/e1000/e1000_param.c index 750fc0194f3..c9cde352b1c 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_param.c +++ b/drivers/net/ethernet/intel/e1000/e1000_param.c @@ -267,7 +267,6 @@ static void e1000_check_copper_options(struct e1000_adapter *adapter); * value exists, a default value is used. The final value is stored * in a variable in the adapter structure. **/ - void e1000_check_options(struct e1000_adapter *adapter) { struct e1000_option opt; @@ -319,7 +318,8 @@ void e1000_check_options(struct e1000_adapter *adapter) .def = E1000_DEFAULT_RXD, .arg = { .r = { .min = E1000_MIN_RXD, - .max = mac_type < e1000_82544 ? E1000_MAX_RXD : E1000_MAX_82544_RXD + .max = mac_type < e1000_82544 ? E1000_MAX_RXD : + E1000_MAX_82544_RXD }} }; @@ -408,7 +408,7 @@ void e1000_check_options(struct e1000_adapter *adapter) if (num_TxAbsIntDelay > bd) { adapter->tx_abs_int_delay = TxAbsIntDelay[bd]; e1000_validate_option(&adapter->tx_abs_int_delay, &opt, - adapter); + adapter); } else { adapter->tx_abs_int_delay = opt.def; } @@ -426,7 +426,7 @@ void e1000_check_options(struct e1000_adapter *adapter) if (num_RxIntDelay > bd) { adapter->rx_int_delay = RxIntDelay[bd]; e1000_validate_option(&adapter->rx_int_delay, &opt, - adapter); + adapter); } else { adapter->rx_int_delay = opt.def; } @@ -444,7 +444,7 @@ void e1000_check_options(struct e1000_adapter *adapter) if (num_RxAbsIntDelay > bd) { adapter->rx_abs_int_delay = RxAbsIntDelay[bd]; e1000_validate_option(&adapter->rx_abs_int_delay, &opt, - adapter); + adapter); } else { adapter->rx_abs_int_delay = opt.def; } @@ -479,16 +479,17 @@ void e1000_check_options(struct e1000_adapter *adapter) break; case 4: e_dev_info("%s set to simplified " - "(2000-8000) ints mode\n", opt.name); + "(2000-8000) ints mode\n", opt.name); adapter->itr_setting = adapter->itr; break; default: e1000_validate_option(&adapter->itr, &opt, - adapter); + adapter); /* save the setting, because the dynamic bits * change itr. * clear the lower two bits because they are - * used as control */ + * used as control + */ adapter->itr_setting = adapter->itr & ~3; break; } @@ -533,7 +534,6 @@ void e1000_check_options(struct e1000_adapter *adapter) * * Handles speed and duplex options on fiber adapters **/ - static void e1000_check_fiber_options(struct e1000_adapter *adapter) { int bd = adapter->bd_number; @@ -559,7 +559,6 @@ static void e1000_check_fiber_options(struct e1000_adapter *adapter) * * Handles speed and duplex options on copper adapters **/ - static void e1000_check_copper_options(struct e1000_adapter *adapter) { struct e1000_option opt; @@ -681,22 +680,22 @@ static void e1000_check_copper_options(struct e1000_adapter *adapter) e_dev_info("Using Autonegotiation at Half Duplex only\n"); adapter->hw.autoneg = adapter->fc_autoneg = 1; adapter->hw.autoneg_advertised = ADVERTISE_10_HALF | - ADVERTISE_100_HALF; + ADVERTISE_100_HALF; break; case FULL_DUPLEX: e_dev_info("Full Duplex specified without Speed\n"); e_dev_info("Using Autonegotiation at Full Duplex only\n"); adapter->hw.autoneg = adapter->fc_autoneg = 1; adapter->hw.autoneg_advertised = ADVERTISE_10_FULL | - ADVERTISE_100_FULL | - ADVERTISE_1000_FULL; + ADVERTISE_100_FULL | + ADVERTISE_1000_FULL; break; case SPEED_10: e_dev_info("10 Mbps Speed specified without Duplex\n"); e_dev_info("Using Autonegotiation at 10 Mbps only\n"); adapter->hw.autoneg = adapter->fc_autoneg = 1; adapter->hw.autoneg_advertised = ADVERTISE_10_HALF | - ADVERTISE_10_FULL; + ADVERTISE_10_FULL; break; case SPEED_10 + HALF_DUPLEX: e_dev_info("Forcing to 10 Mbps Half Duplex\n"); @@ -715,7 +714,7 @@ static void e1000_check_copper_options(struct e1000_adapter *adapter) e_dev_info("Using Autonegotiation at 100 Mbps only\n"); adapter->hw.autoneg = adapter->fc_autoneg = 1; adapter->hw.autoneg_advertised = ADVERTISE_100_HALF | - ADVERTISE_100_FULL; + ADVERTISE_100_FULL; break; case SPEED_100 + HALF_DUPLEX: e_dev_info("Forcing to 100 Mbps Half Duplex\n"); diff --git a/drivers/net/ethernet/intel/e1000e/80003es2lan.c b/drivers/net/ethernet/intel/e1000e/80003es2lan.c index e73c2c35599..e0991388664 100644 --- a/drivers/net/ethernet/intel/e1000e/80003es2lan.c +++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -32,69 +32,6 @@ #include "e1000.h" -#define E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL 0x00 -#define E1000_KMRNCTRLSTA_OFFSET_INB_CTRL 0x02 -#define E1000_KMRNCTRLSTA_OFFSET_HD_CTRL 0x10 -#define E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE 0x1F - -#define E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS 0x0008 -#define E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS 0x0800 -#define E1000_KMRNCTRLSTA_INB_CTRL_DIS_PADDING 0x0010 - -#define E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT 0x0004 -#define E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT 0x0000 -#define E1000_KMRNCTRLSTA_OPMODE_E_IDLE 0x2000 - -#define E1000_KMRNCTRLSTA_OPMODE_MASK 0x000C -#define E1000_KMRNCTRLSTA_OPMODE_INBAND_MDIO 0x0004 - -#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00 /* Gigabit Carry Extend Padding */ -#define DEFAULT_TCTL_EXT_GCEX_80003ES2LAN 0x00010000 - -#define DEFAULT_TIPG_IPGT_1000_80003ES2LAN 0x8 -#define DEFAULT_TIPG_IPGT_10_100_80003ES2LAN 0x9 - -/* GG82563 PHY Specific Status Register (Page 0, Register 16 */ -#define GG82563_PSCR_POLARITY_REVERSAL_DISABLE 0x0002 /* 1=Reversal Disab. */ -#define GG82563_PSCR_CROSSOVER_MODE_MASK 0x0060 -#define GG82563_PSCR_CROSSOVER_MODE_MDI 0x0000 /* 00=Manual MDI */ -#define GG82563_PSCR_CROSSOVER_MODE_MDIX 0x0020 /* 01=Manual MDIX */ -#define GG82563_PSCR_CROSSOVER_MODE_AUTO 0x0060 /* 11=Auto crossover */ - -/* PHY Specific Control Register 2 (Page 0, Register 26) */ -#define GG82563_PSCR2_REVERSE_AUTO_NEG 0x2000 - /* 1=Reverse Auto-Negotiation */ - -/* MAC Specific Control Register (Page 2, Register 21) */ -/* Tx clock speed for Link Down and 1000BASE-T for the following speeds */ -#define GG82563_MSCR_TX_CLK_MASK 0x0007 -#define GG82563_MSCR_TX_CLK_10MBPS_2_5 0x0004 -#define GG82563_MSCR_TX_CLK_100MBPS_25 0x0005 -#define GG82563_MSCR_TX_CLK_1000MBPS_25 0x0007 - -#define GG82563_MSCR_ASSERT_CRS_ON_TX 0x0010 /* 1=Assert */ - -/* DSP Distance Register (Page 5, Register 26) */ -#define GG82563_DSPD_CABLE_LENGTH 0x0007 /* 0 = <50M - 1 = 50-80M - 2 = 80-110M - 3 = 110-140M - 4 = >140M - */ - -/* Kumeran Mode Control Register (Page 193, Register 16) */ -#define GG82563_KMCR_PASS_FALSE_CARRIER 0x0800 - -/* Max number of times Kumeran read/write should be validated */ -#define GG82563_MAX_KMRN_RETRY 0x5 - -/* Power Management Control Register (Page 193, Register 20) */ -#define GG82563_PMCR_ENABLE_ELECTRICAL_IDLE 0x0001 - /* 1=Enable SERDES Electrical Idle */ - -/* In-Band Control Register (Page 194, Register 18) */ -#define GG82563_ICR_DIS_PADDING 0x0010 /* Disable Padding */ - /* A table for the GG82563 cable length where the range is defined * with a lower bound at "index" and the upper bound at * "index + 5". @@ -111,11 +48,10 @@ static void e1000_initialize_hw_bits_80003es2lan(struct e1000_hw *hw); static void e1000_clear_hw_cntrs_80003es2lan(struct e1000_hw *hw); static s32 e1000_cfg_kmrn_1000_80003es2lan(struct e1000_hw *hw); static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex); -static s32 e1000_cfg_on_link_up_80003es2lan(struct e1000_hw *hw); -static s32 e1000_read_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset, - u16 *data); -static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset, - u16 data); +static s32 e1000_read_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset, + u16 *data); +static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset, + u16 data); static void e1000_power_down_phy_copper_80003es2lan(struct e1000_hw *hw); /** @@ -625,16 +561,16 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw) e_dbg("GG82563 PSCR: %X\n", phy_data); - ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data); + ret_val = e1e_rphy(hw, MII_BMCR, &phy_data); if (ret_val) return ret_val; e1000e_phy_force_speed_duplex_setup(hw, &phy_data); /* Reset the phy to commit changes. */ - phy_data |= MII_CR_RESET; + phy_data |= BMCR_RESET; - ret_val = e1e_wphy(hw, PHY_CONTROL, phy_data); + ret_val = e1e_wphy(hw, MII_BMCR, phy_data); if (ret_val) return ret_val; @@ -696,7 +632,7 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw) static s32 e1000_get_cable_length_80003es2lan(struct e1000_hw *hw) { struct e1000_phy_info *phy = &hw->phy; - s32 ret_val = 0; + s32 ret_val; u16 phy_data, index; ret_val = e1e_rphy(hw, GG82563_PHY_DSP_DISTANCE, &phy_data); @@ -774,6 +710,9 @@ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw) ctrl = er32(CTRL); ret_val = e1000_acquire_phy_80003es2lan(hw); + if (ret_val) + return ret_val; + e_dbg("Issuing a global reset to MAC\n"); ew32(CTRL, ctrl | E1000_CTRL_RST); e1000_release_phy_80003es2lan(hw); @@ -833,6 +772,8 @@ static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw) /* Setup link and flow control */ ret_val = mac->ops.setup_link(hw); + if (ret_val) + return ret_val; /* Disable IBIST slave mode (far-end loopback) */ e1000_read_kmrn_reg_80003es2lan(hw, E1000_KMRNCTRLSTA_INBAND_PARAM, @@ -1006,7 +947,7 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw) return ret_val; /* SW Reset the PHY so all changes take effect */ - ret_val = e1000e_commit_phy(hw); + ret_val = hw->phy.ops.commit(hw); if (ret_val) { e_dbg("Error Resetting the PHY\n"); return ret_val; @@ -1272,7 +1213,7 @@ static s32 e1000_read_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset, u16 *data) { u32 kmrnctrlsta; - s32 ret_val = 0; + s32 ret_val; ret_val = e1000_acquire_mac_csr_80003es2lan(hw); if (ret_val) @@ -1307,7 +1248,7 @@ static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset, u16 data) { u32 kmrnctrlsta; - s32 ret_val = 0; + s32 ret_val; ret_val = e1000_acquire_mac_csr_80003es2lan(hw); if (ret_val) @@ -1331,7 +1272,7 @@ static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset, **/ static s32 e1000_read_mac_addr_80003es2lan(struct e1000_hw *hw) { - s32 ret_val = 0; + s32 ret_val; /* If there's an alternate MAC address place it in RAR0 * so that it will override the Si installed default perm @@ -1434,18 +1375,18 @@ static const struct e1000_phy_operations es2_phy_ops = { .acquire = e1000_acquire_phy_80003es2lan, .check_polarity = e1000_check_polarity_m88, .check_reset_block = e1000e_check_reset_block_generic, - .commit = e1000e_phy_sw_reset, - .force_speed_duplex = e1000_phy_force_speed_duplex_80003es2lan, - .get_cfg_done = e1000_get_cfg_done_80003es2lan, - .get_cable_length = e1000_get_cable_length_80003es2lan, - .get_info = e1000e_get_phy_info_m88, - .read_reg = e1000_read_phy_reg_gg82563_80003es2lan, + .commit = e1000e_phy_sw_reset, + .force_speed_duplex = e1000_phy_force_speed_duplex_80003es2lan, + .get_cfg_done = e1000_get_cfg_done_80003es2lan, + .get_cable_length = e1000_get_cable_length_80003es2lan, + .get_info = e1000e_get_phy_info_m88, + .read_reg = e1000_read_phy_reg_gg82563_80003es2lan, .release = e1000_release_phy_80003es2lan, - .reset = e1000e_phy_hw_reset_generic, - .set_d0_lplu_state = NULL, - .set_d3_lplu_state = e1000e_set_d3_lplu_state, - .write_reg = e1000_write_phy_reg_gg82563_80003es2lan, - .cfg_on_link_up = e1000_cfg_on_link_up_80003es2lan, + .reset = e1000e_phy_hw_reset_generic, + .set_d0_lplu_state = NULL, + .set_d3_lplu_state = e1000e_set_d3_lplu_state, + .write_reg = e1000_write_phy_reg_gg82563_80003es2lan, + .cfg_on_link_up = e1000_cfg_on_link_up_80003es2lan, }; static const struct e1000_nvm_operations es2_nvm_ops = { diff --git a/drivers/net/ethernet/intel/e1000e/80003es2lan.h b/drivers/net/ethernet/intel/e1000e/80003es2lan.h new file mode 100644 index 00000000000..90d363b2d28 --- /dev/null +++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.h @@ -0,0 +1,95 @@ +/******************************************************************************* + + Intel PRO/1000 Linux driver + Copyright(c) 1999 - 2013 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000E_80003ES2LAN_H_ +#define _E1000E_80003ES2LAN_H_ + +#define E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL 0x00 +#define E1000_KMRNCTRLSTA_OFFSET_INB_CTRL 0x02 +#define E1000_KMRNCTRLSTA_OFFSET_HD_CTRL 0x10 +#define E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE 0x1F + +#define E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS 0x0008 +#define E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS 0x0800 +#define E1000_KMRNCTRLSTA_INB_CTRL_DIS_PADDING 0x0010 + +#define E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT 0x0004 +#define E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT 0x0000 +#define E1000_KMRNCTRLSTA_OPMODE_E_IDLE 0x2000 + +#define E1000_KMRNCTRLSTA_OPMODE_MASK 0x000C +#define E1000_KMRNCTRLSTA_OPMODE_INBAND_MDIO 0x0004 + +#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00 /* Gig Carry Extend Padding */ +#define DEFAULT_TCTL_EXT_GCEX_80003ES2LAN 0x00010000 + +#define DEFAULT_TIPG_IPGT_1000_80003ES2LAN 0x8 +#define DEFAULT_TIPG_IPGT_10_100_80003ES2LAN 0x9 + +/* GG82563 PHY Specific Status Register (Page 0, Register 16 */ +#define GG82563_PSCR_POLARITY_REVERSAL_DISABLE 0x0002 /* 1=Reversal Dis */ +#define GG82563_PSCR_CROSSOVER_MODE_MASK 0x0060 +#define GG82563_PSCR_CROSSOVER_MODE_MDI 0x0000 /* 00=Manual MDI */ +#define GG82563_PSCR_CROSSOVER_MODE_MDIX 0x0020 /* 01=Manual MDIX */ +#define GG82563_PSCR_CROSSOVER_MODE_AUTO 0x0060 /* 11=Auto crossover */ + +/* PHY Specific Control Register 2 (Page 0, Register 26) */ +#define GG82563_PSCR2_REVERSE_AUTO_NEG 0x2000 /* 1=Reverse Auto-Neg */ + +/* MAC Specific Control Register (Page 2, Register 21) */ +/* Tx clock speed for Link Down and 1000BASE-T for the following speeds */ +#define GG82563_MSCR_TX_CLK_MASK 0x0007 +#define GG82563_MSCR_TX_CLK_10MBPS_2_5 0x0004 +#define GG82563_MSCR_TX_CLK_100MBPS_25 0x0005 +#define GG82563_MSCR_TX_CLK_1000MBPS_25 0x0007 + +#define GG82563_MSCR_ASSERT_CRS_ON_TX 0x0010 /* 1=Assert */ + +/* DSP Distance Register (Page 5, Register 26) + * 0 = <50M + * 1 = 50-80M + * 2 = 80-100M + * 3 = 110-140M + * 4 = >140M + */ +#define GG82563_DSPD_CABLE_LENGTH 0x0007 + +/* Kumeran Mode Control Register (Page 193, Register 16) */ +#define GG82563_KMCR_PASS_FALSE_CARRIER 0x0800 + +/* Max number of times Kumeran read/write should be validated */ +#define GG82563_MAX_KMRN_RETRY 0x5 + +/* Power Management Control Register (Page 193, Register 20) */ +/* 1=Enable SERDES Electrical Idle */ +#define GG82563_PMCR_ENABLE_ELECTRICAL_IDLE 0x0001 + +/* In-Band Control Register (Page 194, Register 18) */ +#define GG82563_ICR_DIS_PADDING 0x0010 /* Disable Padding */ + +#endif diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c index c77d010d5c5..2faffbde179 100644 --- a/drivers/net/ethernet/intel/e1000e/82571.c +++ b/drivers/net/ethernet/intel/e1000e/82571.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -44,21 +44,6 @@ #include "e1000.h" -#define ID_LED_RESERVED_F746 0xF746 -#define ID_LED_DEFAULT_82573 ((ID_LED_DEF1_DEF2 << 12) | \ - (ID_LED_OFF1_ON2 << 8) | \ - (ID_LED_DEF1_DEF2 << 4) | \ - (ID_LED_DEF1_DEF2)) - -#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000 -#define AN_RETRY_COUNT 5 /* Autoneg Retry Count value */ -#define E1000_BASE1000T_STATUS 10 -#define E1000_IDLE_ERROR_COUNT_MASK 0xFF -#define E1000_RECEIVE_ERROR_COUNTER 21 -#define E1000_RECEIVE_ERROR_MAX 0xFFFF - -#define E1000_NVM_INIT_CTRL2_MNGM 0x6000 /* Manageability Operation Mode mask */ - static s32 e1000_get_phy_id_82571(struct e1000_hw *hw); static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw); static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw); @@ -67,9 +52,7 @@ static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw); static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw); -static s32 e1000_setup_link_82571(struct e1000_hw *hw); static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw); -static void e1000_clear_vfta_82571(struct e1000_hw *hw); static bool e1000_check_mng_mode_82574(struct e1000_hw *hw); static s32 e1000_led_on_82574(struct e1000_hw *hw); static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw); @@ -449,13 +432,13 @@ static s32 e1000_get_phy_id_82571(struct e1000_hw *hw) break; case e1000_82574: case e1000_82583: - ret_val = e1e_rphy(hw, PHY_ID1, &phy_id); + ret_val = e1e_rphy(hw, MII_PHYSID1, &phy_id); if (ret_val) return ret_val; phy->id = (u32)(phy_id << 16); udelay(20); - ret_val = e1e_rphy(hw, PHY_ID2, &phy_id); + ret_val = e1e_rphy(hw, MII_PHYSID2, &phy_id); if (ret_val) return ret_val; @@ -556,16 +539,14 @@ static s32 e1000_get_hw_semaphore_82573(struct e1000_hw *hw) s32 i = 0; extcnf_ctrl = er32(EXTCNF_CTRL); - extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP; do { + extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP; ew32(EXTCNF_CTRL, extcnf_ctrl); extcnf_ctrl = er32(EXTCNF_CTRL); if (extcnf_ctrl & E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP) break; - extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP; - usleep_range(2000, 4000); i++; } while (i < MDIO_OWNERSHIP_TIMEOUT); @@ -937,6 +918,8 @@ static s32 e1000_set_d0_lplu_state_82571(struct e1000_hw *hw, bool active) /* When LPLU is enabled, we should disable SmartSpeed */ ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, &data); + if (ret_val) + return ret_val; data &= ~IGP01E1000_PSCFR_SMART_SPEED; ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data); if (ret_val) @@ -1329,9 +1312,10 @@ static void e1000_clear_vfta_82571(struct e1000_hw *hw) */ vfta_offset = (hw->mng_cookie.vlan_id >> E1000_VFTA_ENTRY_SHIFT) & - E1000_VFTA_ENTRY_MASK; - vfta_bit_in_reg = 1 << (hw->mng_cookie.vlan_id & - E1000_VFTA_ENTRY_BIT_SHIFT_MASK); + E1000_VFTA_ENTRY_MASK; + vfta_bit_in_reg = + 1 << (hw->mng_cookie.vlan_id & + E1000_VFTA_ENTRY_BIT_SHIFT_MASK); } break; default: @@ -1399,7 +1383,7 @@ bool e1000_check_phy_82574(struct e1000_hw *hw) { u16 status_1kbt = 0; u16 receive_errors = 0; - s32 ret_val = 0; + s32 ret_val; /* Read PHY Receive Error counter first, if its is max - all F's then * read the Base1000T status register If both are max then PHY is hung. @@ -1544,13 +1528,12 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) ctrl = er32(CTRL); status = er32(STATUS); - rxcw = er32(RXCW); + er32(RXCW); /* SYNCH bit and IV bit are sticky */ udelay(10); rxcw = er32(RXCW); if ((rxcw & E1000_RXCW_SYNCH) && !(rxcw & E1000_RXCW_IV)) { - /* Receiver is synchronized with no invalid bits. */ switch (mac->serdes_link_state) { case e1000_serdes_link_autoneg_complete: @@ -1799,6 +1782,8 @@ static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw) if (ret_val) return ret_val; ret_val = e1000e_update_nvm_checksum(hw); + if (ret_val) + return ret_val; } } @@ -1812,7 +1797,7 @@ static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw) static s32 e1000_read_mac_addr_82571(struct e1000_hw *hw) { if (hw->mac.type == e1000_82571) { - s32 ret_val = 0; + s32 ret_val; /* If there's an alternate MAC address place it in RAR0 * so that it will override the Si installed default perm @@ -1931,7 +1916,7 @@ static const struct e1000_phy_operations e82_phy_ops_igp = { .set_d0_lplu_state = e1000_set_d0_lplu_state_82571, .set_d3_lplu_state = e1000e_set_d3_lplu_state, .write_reg = e1000e_write_phy_reg_igp, - .cfg_on_link_up = NULL, + .cfg_on_link_up = NULL, }; static const struct e1000_phy_operations e82_phy_ops_m88 = { @@ -1940,7 +1925,7 @@ static const struct e1000_phy_operations e82_phy_ops_m88 = { .check_reset_block = e1000e_check_reset_block_generic, .commit = e1000e_phy_sw_reset, .force_speed_duplex = e1000e_phy_force_speed_duplex_m88, - .get_cfg_done = e1000e_get_cfg_done, + .get_cfg_done = e1000e_get_cfg_done_generic, .get_cable_length = e1000e_get_cable_length_m88, .get_info = e1000e_get_phy_info_m88, .read_reg = e1000e_read_phy_reg_m88, @@ -1949,7 +1934,7 @@ static const struct e1000_phy_operations e82_phy_ops_m88 = { .set_d0_lplu_state = e1000_set_d0_lplu_state_82571, .set_d3_lplu_state = e1000e_set_d3_lplu_state, .write_reg = e1000e_write_phy_reg_m88, - .cfg_on_link_up = NULL, + .cfg_on_link_up = NULL, }; static const struct e1000_phy_operations e82_phy_ops_bm = { @@ -1958,7 +1943,7 @@ static const struct e1000_phy_operations e82_phy_ops_bm = { .check_reset_block = e1000e_check_reset_block_generic, .commit = e1000e_phy_sw_reset, .force_speed_duplex = e1000e_phy_force_speed_duplex_m88, - .get_cfg_done = e1000e_get_cfg_done, + .get_cfg_done = e1000e_get_cfg_done_generic, .get_cable_length = e1000e_get_cable_length_m88, .get_info = e1000e_get_phy_info_m88, .read_reg = e1000e_read_phy_reg_bm2, @@ -1967,7 +1952,7 @@ static const struct e1000_phy_operations e82_phy_ops_bm = { .set_d0_lplu_state = e1000_set_d0_lplu_state_82571, .set_d3_lplu_state = e1000e_set_d3_lplu_state, .write_reg = e1000e_write_phy_reg_bm2, - .cfg_on_link_up = NULL, + .cfg_on_link_up = NULL, }; static const struct e1000_nvm_operations e82571_nvm_ops = { @@ -2044,6 +2029,7 @@ const struct e1000_info e1000_82574_info = { | FLAG_HAS_MSIX | FLAG_HAS_JUMBO_FRAMES | FLAG_HAS_WOL + | FLAG_HAS_HW_TIMESTAMP | FLAG_APME_IN_CTRL3 | FLAG_HAS_SMART_POWER_DOWN | FLAG_HAS_AMT @@ -2065,6 +2051,7 @@ const struct e1000_info e1000_82583_info = { .mac = e1000_82583, .flags = FLAG_HAS_HW_VLAN_FILTER | FLAG_HAS_WOL + | FLAG_HAS_HW_TIMESTAMP | FLAG_APME_IN_CTRL3 | FLAG_HAS_SMART_POWER_DOWN | FLAG_HAS_AMT diff --git a/drivers/net/ethernet/intel/e1000e/82571.h b/drivers/net/ethernet/intel/e1000e/82571.h new file mode 100644 index 00000000000..85cb1a3b7cd --- /dev/null +++ b/drivers/net/ethernet/intel/e1000e/82571.h @@ -0,0 +1,58 @@ +/******************************************************************************* + + Intel PRO/1000 Linux driver + Copyright(c) 1999 - 2013 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000E_82571_H_ +#define _E1000E_82571_H_ + +#define ID_LED_RESERVED_F746 0xF746 +#define ID_LED_DEFAULT_82573 ((ID_LED_DEF1_DEF2 << 12) | \ + (ID_LED_OFF1_ON2 << 8) | \ + (ID_LED_DEF1_DEF2 << 4) | \ + (ID_LED_DEF1_DEF2)) + +#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000 +#define AN_RETRY_COUNT 5 /* Autoneg Retry Count value */ + +/* Intr Throttling - RW */ +#define E1000_EITR_82574(_n) (0x000E8 + (0x4 * (_n))) + +#define E1000_EIAC_82574 0x000DC /* Ext. Interrupt Auto Clear - RW */ +#define E1000_EIAC_MASK_82574 0x01F00000 + +/* Manageability Operation Mode mask */ +#define E1000_NVM_INIT_CTRL2_MNGM 0x6000 + +#define E1000_BASE1000T_STATUS 10 +#define E1000_IDLE_ERROR_COUNT_MASK 0xFF +#define E1000_RECEIVE_ERROR_COUNTER 21 +#define E1000_RECEIVE_ERROR_MAX 0xFFFF +bool e1000_check_phy_82574(struct e1000_hw *hw); +bool e1000e_get_laa_state_82571(struct e1000_hw *hw); +void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state); + +#endif diff --git a/drivers/net/ethernet/intel/e1000e/Makefile b/drivers/net/ethernet/intel/e1000e/Makefile index 591b7132450..c2dcfcc1085 100644 --- a/drivers/net/ethernet/intel/e1000e/Makefile +++ b/drivers/net/ethernet/intel/e1000e/Makefile @@ -1,7 +1,7 @@ ################################################################################ # # Intel PRO/1000 Linux driver -# Copyright(c) 1999 - 2012 Intel Corporation. +# Copyright(c) 1999 - 2013 Intel Corporation. # # This program is free software; you can redistribute it and/or modify it # under the terms and conditions of the GNU General Public License, @@ -34,5 +34,5 @@ obj-$(CONFIG_E1000E) += e1000e.o e1000e-objs := 82571.o ich8lan.o 80003es2lan.o \ mac.o manage.o nvm.o phy.o \ - param.o ethtool.o netdev.o + param.o ethtool.o netdev.o ptp.o diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h index 02a12b69555..fc3a4fe1ac7 100644 --- a/drivers/net/ethernet/intel/e1000e/defines.h +++ b/drivers/net/ethernet/intel/e1000e/defines.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -29,25 +29,6 @@ #ifndef _E1000_DEFINES_H_ #define _E1000_DEFINES_H_ -#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */ -#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */ -#define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */ -#define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */ -#define E1000_TXD_CMD_IC 0x04000000 /* Insert Checksum */ -#define E1000_TXD_CMD_RS 0x08000000 /* Report Status */ -#define E1000_TXD_CMD_RPS 0x10000000 /* Report Packet Sent */ -#define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */ -#define E1000_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */ -#define E1000_TXD_CMD_IDE 0x80000000 /* Enable Tidv register */ -#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */ -#define E1000_TXD_STAT_EC 0x00000002 /* Excess Collisions */ -#define E1000_TXD_STAT_LC 0x00000004 /* Late Collisions */ -#define E1000_TXD_STAT_TU 0x00000008 /* Transmit underrun */ -#define E1000_TXD_CMD_TCP 0x01000000 /* TCP packet */ -#define E1000_TXD_CMD_IP 0x02000000 /* IP packet */ -#define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */ -#define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */ - /* Number of Transmit and Receive Descriptors must be a multiple of 8 */ #define REQ_TX_DESCRIPTOR_MULTIPLE 8 #define REQ_RX_DESCRIPTOR_MULTIPLE 8 @@ -86,7 +67,6 @@ #define E1000_CTRL_EXT_EIAME 0x01000000 #define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */ #define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */ -#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */ #define E1000_CTRL_EXT_PBA_CLR 0x80000000 /* PBA Clear */ #define E1000_CTRL_EXT_LSECCK 0x00001000 #define E1000_CTRL_EXT_PHYPDEN 0x00100000 @@ -107,6 +87,7 @@ #define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */ #define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */ +#define E1000_RXDEXT_STATERR_TST 0x00000100 /* Time Stamp taken */ #define E1000_RXDEXT_STATERR_CE 0x01000000 #define E1000_RXDEXT_STATERR_SE 0x02000000 #define E1000_RXDEXT_STATERR_SEQ 0x04000000 @@ -115,19 +96,19 @@ /* mask to determine if packets should be dropped due to frame errors */ #define E1000_RXD_ERR_FRAME_ERR_MASK ( \ - E1000_RXD_ERR_CE | \ - E1000_RXD_ERR_SE | \ - E1000_RXD_ERR_SEQ | \ - E1000_RXD_ERR_CXE | \ - E1000_RXD_ERR_RXE) + E1000_RXD_ERR_CE | \ + E1000_RXD_ERR_SE | \ + E1000_RXD_ERR_SEQ | \ + E1000_RXD_ERR_CXE | \ + E1000_RXD_ERR_RXE) /* Same mask, but for extended and packet split descriptors */ #define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \ - E1000_RXDEXT_STATERR_CE | \ - E1000_RXDEXT_STATERR_SE | \ - E1000_RXDEXT_STATERR_SEQ | \ - E1000_RXDEXT_STATERR_CXE | \ - E1000_RXDEXT_STATERR_RXE) + E1000_RXDEXT_STATERR_CE | \ + E1000_RXDEXT_STATERR_SE | \ + E1000_RXDEXT_STATERR_SEQ | \ + E1000_RXDEXT_STATERR_CXE | \ + E1000_RXDEXT_STATERR_RXE) #define E1000_MRQC_RSS_FIELD_MASK 0xFFFF0000 #define E1000_MRQC_RSS_FIELD_IPV4_TCP 0x00010000 @@ -232,6 +213,7 @@ #define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */ #define E1000_CTRL_LANPHYPC_OVERRIDE 0x00010000 /* SW control of LANPHYPC */ #define E1000_CTRL_LANPHYPC_VALUE 0x00020000 /* SW value of LANPHYPC */ +#define E1000_CTRL_MEHE 0x00080000 /* Memory Error Handling Enable */ #define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */ #define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */ #define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */ @@ -241,9 +223,9 @@ #define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */ #define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */ -/* Bit definitions for the Management Data IO (MDIO) and Management Data - * Clock (MDC) pins in the Device Control Register. - */ +#define E1000_PCS_LCTL_FORCE_FCTRL 0x80 + +#define E1000_PCS_LSTS_AN_COMPLETE 0x10000 /* Device Status */ #define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */ @@ -259,8 +241,6 @@ #define E1000_STATUS_PHYRA 0x00000400 /* PHY Reset Asserted */ #define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */ -/* Constants used to interpret the masked PCI-X bus speed. */ - #define HALF_DUPLEX 1 #define FULL_DUPLEX 2 @@ -273,14 +253,15 @@ #define ADVERTISE_1000_FULL 0x0020 /* 1000/H is not supported, nor spec-compliant. */ -#define E1000_ALL_SPEED_DUPLEX ( ADVERTISE_10_HALF | ADVERTISE_10_FULL | \ - ADVERTISE_100_HALF | ADVERTISE_100_FULL | \ - ADVERTISE_1000_FULL) -#define E1000_ALL_NOT_GIG ( ADVERTISE_10_HALF | ADVERTISE_10_FULL | \ - ADVERTISE_100_HALF | ADVERTISE_100_FULL) -#define E1000_ALL_100_SPEED (ADVERTISE_100_HALF | ADVERTISE_100_FULL) -#define E1000_ALL_10_SPEED (ADVERTISE_10_HALF | ADVERTISE_10_FULL) -#define E1000_ALL_HALF_DUPLEX (ADVERTISE_10_HALF | ADVERTISE_100_HALF) +#define E1000_ALL_SPEED_DUPLEX ( \ + ADVERTISE_10_HALF | ADVERTISE_10_FULL | ADVERTISE_100_HALF | \ + ADVERTISE_100_FULL | ADVERTISE_1000_FULL) +#define E1000_ALL_NOT_GIG ( \ + ADVERTISE_10_HALF | ADVERTISE_10_FULL | ADVERTISE_100_HALF | \ + ADVERTISE_100_FULL) +#define E1000_ALL_100_SPEED (ADVERTISE_100_HALF | ADVERTISE_100_FULL) +#define E1000_ALL_10_SPEED (ADVERTISE_10_HALF | ADVERTISE_10_FULL) +#define E1000_ALL_HALF_DUPLEX (ADVERTISE_10_HALF | ADVERTISE_100_HALF) #define AUTONEG_ADVERTISE_SPEED_DEFAULT E1000_ALL_SPEED_DUPLEX @@ -318,6 +299,7 @@ #define E1000_TXD_CMD_IP 0x02000000 /* IP packet */ #define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */ #define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */ +#define E1000_TXD_EXTCMD_TSTAMP 0x00000010 /* IEEE1588 Timestamp packet */ /* Transmit Control */ #define E1000_TCTL_EN 0x00000002 /* enable Tx */ @@ -327,8 +309,6 @@ #define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */ #define E1000_TCTL_MULR 0x10000000 /* Multiple request support */ -/* Transmit Arbitration Count */ - /* SerDes Control */ #define E1000_SCTL_DISABLE_SERDES_LOOPBACK 0x0400 @@ -383,12 +363,23 @@ #define E1000_KABGTXD_BGSQLBIAS 0x00050000 +/* Low Power IDLE Control */ +#define E1000_LPIC_LPIET_SHIFT 24 /* Low Power Idle Entry Time */ + /* PBA constants */ #define E1000_PBA_8K 0x0008 /* 8KB */ #define E1000_PBA_16K 0x0010 /* 16KB */ +#define E1000_PBA_RXA_MASK 0xFFFF + #define E1000_PBS_16K E1000_PBA_16K +/* Uncorrectable/correctable ECC Error counts and enable bits */ +#define E1000_PBECCSTS_CORR_ERR_CNT_MASK 0x000000FF +#define E1000_PBECCSTS_UNCORR_ERR_CNT_MASK 0x0000FF00 +#define E1000_PBECCSTS_UNCORR_ERR_CNT_SHIFT 8 +#define E1000_PBECCSTS_ECC_ENABLE 0x00010000 + #define IFS_MAX 80 #define IFS_MIN 40 #define IFS_RATIO 4 @@ -408,6 +399,7 @@ #define E1000_ICR_RXSEQ 0x00000008 /* Rx sequence error */ #define E1000_ICR_RXDMT0 0x00000010 /* Rx desc min. threshold (0) */ #define E1000_ICR_RXT0 0x00000080 /* Rx timer intr (ring 0) */ +#define E1000_ICR_ECCER 0x00400000 /* Uncorrectable ECC Error */ #define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver should claim the interrupt */ #define E1000_ICR_RXQ0 0x00100000 /* Rx Queue 0 Interrupt */ #define E1000_ICR_RXQ1 0x00200000 /* Rx Queue 1 Interrupt */ @@ -431,11 +423,11 @@ * o LSC = Link Status Change */ #define IMS_ENABLE_MASK ( \ - E1000_IMS_RXT0 | \ - E1000_IMS_TXDW | \ - E1000_IMS_RXDMT0 | \ - E1000_IMS_RXSEQ | \ - E1000_IMS_LSC) + E1000_IMS_RXT0 | \ + E1000_IMS_TXDW | \ + E1000_IMS_RXDMT0 | \ + E1000_IMS_RXSEQ | \ + E1000_IMS_LSC) /* Interrupt Mask Set */ #define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */ @@ -443,6 +435,7 @@ #define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */ #define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */ #define E1000_IMS_RXT0 E1000_ICR_RXT0 /* Rx timer intr */ +#define E1000_IMS_ECCER E1000_ICR_ECCER /* Uncorrectable ECC Error */ #define E1000_IMS_RXQ0 E1000_ICR_RXQ0 /* Rx Queue 0 Interrupt */ #define E1000_IMS_RXQ1 E1000_ICR_RXQ1 /* Rx Queue 1 Interrupt */ #define E1000_IMS_TXQ0 E1000_ICR_TXQ0 /* Tx Queue 0 Interrupt */ @@ -533,6 +526,28 @@ #define E1000_RXCW_C 0x20000000 /* Receive config */ #define E1000_RXCW_SYNCH 0x40000000 /* Receive config synch */ +#define E1000_TSYNCTXCTL_VALID 0x00000001 /* Tx timestamp valid */ +#define E1000_TSYNCTXCTL_ENABLED 0x00000010 /* enable Tx timestamping */ + +#define E1000_TSYNCRXCTL_VALID 0x00000001 /* Rx timestamp valid */ +#define E1000_TSYNCRXCTL_TYPE_MASK 0x0000000E /* Rx type mask */ +#define E1000_TSYNCRXCTL_TYPE_L2_V2 0x00 +#define E1000_TSYNCRXCTL_TYPE_L4_V1 0x02 +#define E1000_TSYNCRXCTL_TYPE_L2_L4_V2 0x04 +#define E1000_TSYNCRXCTL_TYPE_ALL 0x08 +#define E1000_TSYNCRXCTL_TYPE_EVENT_V2 0x0A +#define E1000_TSYNCRXCTL_ENABLED 0x00000010 /* enable Rx timestamping */ +#define E1000_TSYNCRXCTL_SYSCFI 0x00000020 /* Sys clock frequency */ + +#define E1000_RXMTRL_PTP_V1_SYNC_MESSAGE 0x00000000 +#define E1000_RXMTRL_PTP_V1_DELAY_REQ_MESSAGE 0x00010000 + +#define E1000_RXMTRL_PTP_V2_SYNC_MESSAGE 0x00000000 +#define E1000_RXMTRL_PTP_V2_DELAY_REQ_MESSAGE 0x01000000 + +#define E1000_TIMINCA_INCPERIOD_SHIFT 24 +#define E1000_TIMINCA_INCVALUE_MASK 0x00FFFFFF + /* PCI Express Control */ #define E1000_GCR_RXD_NO_SNOOP 0x00000001 #define E1000_GCR_RXDSCW_NO_SNOOP 0x00000002 @@ -548,66 +563,6 @@ E1000_GCR_TXDSCW_NO_SNOOP | \ E1000_GCR_TXDSCR_NO_SNOOP) -/* PHY Control Register */ -#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ -#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ -#define MII_CR_POWER_DOWN 0x0800 /* Power down */ -#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ -#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ -#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ -#define MII_CR_SPEED_1000 0x0040 -#define MII_CR_SPEED_100 0x2000 -#define MII_CR_SPEED_10 0x0000 - -/* PHY Status Register */ -#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */ -#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */ - -/* Autoneg Advertisement Register */ -#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */ -#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */ -#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */ -#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */ -#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */ -#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */ - -/* Link Partner Ability Register (Base Page) */ -#define NWAY_LPAR_100TX_FD_CAPS 0x0100 /* LP 100TX Full Dplx Capable */ -#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */ -#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */ - -/* Autoneg Expansion Register */ -#define NWAY_ER_LP_NWAY_CAPS 0x0001 /* LP has Auto Neg Capability */ - -/* 1000BASE-T Control Register */ -#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */ -#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */ - /* 0=DTE device */ -#define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */ - /* 0=Configure PHY as Slave */ -#define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */ - /* 0=Automatic Master/Slave config */ - -/* 1000BASE-T Status Register */ -#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */ -#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */ - - -/* PHY 1000 MII Register/Bit Definitions */ -/* PHY Registers defined by IEEE */ -#define PHY_CONTROL 0x00 /* Control Register */ -#define PHY_STATUS 0x01 /* Status Register */ -#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */ -#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */ -#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */ -#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */ -#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */ -#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */ -#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */ -#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */ - -#define PHY_CONTROL_LB 0x4000 /* PHY Loopback bit */ - /* NVM Control */ #define E1000_EECD_SK 0x00000001 /* NVM Clock */ #define E1000_EECD_CS 0x00000002 /* NVM Chip Select */ @@ -639,6 +594,10 @@ /* NVM Word Offsets */ #define NVM_COMPAT 0x0003 #define NVM_ID_LED_SETTINGS 0x0004 +#define NVM_FUTURE_INIT_WORD1 0x0019 +#define NVM_COMPAT_VALID_CSUM 0x0001 +#define NVM_FUTURE_INIT_WORD1_VALID_CSUM 0x0040 + #define NVM_INIT_CONTROL2_REG 0x000F #define NVM_INIT_CONTROL3_PORT_B 0x0014 #define NVM_INIT_3GIO_3 0x001A @@ -647,8 +606,6 @@ #define NVM_ALT_MAC_ADDR_PTR 0x0037 #define NVM_CHECKSUM_REG 0x003F -#define E1000_NVM_INIT_CTRL2_MNGM 0x6000 /* Manageability Operation Mode mask */ - #define E1000_NVM_CFG_DONE_PORT_0 0x40000 /* MNG config cycle done */ #define E1000_NVM_CFG_DONE_PORT_1 0x80000 /* ...for second port */ @@ -757,9 +714,6 @@ #define M88E1000_PSCR_AUTO_X_1000T 0x0040 /* Auto crossover enabled all speeds */ #define M88E1000_PSCR_AUTO_X_MODE 0x0060 -/* 1=Enable Extended 10BASE-T distance (Lower 10BASE-T Rx Threshold) - * 0=Normal 10BASE-T Rx Threshold - */ #define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */ /* M88E1000 PHY Specific Status Register */ @@ -795,11 +749,6 @@ /* BME1000 PHY Specific Control Register */ #define BME1000_PSCR_ENABLE_DOWNSHIFT 0x0800 /* 1 = enable downshift */ - -#define PHY_PAGE_SHIFT 5 -#define PHY_REG(page, reg) (((page) << PHY_PAGE_SHIFT) | \ - ((reg) & MAX_PHY_REG_ADDRESS)) - /* Bits... * 15-5: page * 4-0: register offset @@ -846,8 +795,4 @@ /* SerDes Control */ #define E1000_GEN_POLL_TIMEOUT 640 -/* FW Semaphore */ -#define E1000_FWSM_WLOCK_MAC_MASK 0x0380 -#define E1000_FWSM_WLOCK_MAC_SHIFT 7 - #endif /* _E1000_DEFINES_H_ */ diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index 6782a2eea1b..fcc758138b8 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -41,7 +41,11 @@ #include <linux/pci-aspm.h> #include <linux/crc32.h> #include <linux/if_vlan.h> - +#include <linux/clocksource.h> +#include <linux/net_tstamp.h> +#include <linux/ptp_clock_kernel.h> +#include <linux/ptp_classify.h> +#include <linux/mii.h> #include "hw.h" struct e1000_info; @@ -75,9 +79,6 @@ struct e1000_info; #define E1000_MIN_ITR_USECS 10 /* 100000 irq/sec */ #define E1000_MAX_ITR_USECS 10000 /* 100 irq/sec */ -/* Early Receive defines */ -#define E1000_ERT_2048 0x100 - #define E1000_FC_PAUSE_TIME 0x0680 /* 858 usec */ /* How many Tx Descriptors do we need to call netif_wake_queue ? */ @@ -94,70 +95,6 @@ struct e1000_info; #define DEFAULT_JUMBO 9234 -/* BM/HV Specific Registers */ -#define BM_PORT_CTRL_PAGE 769 - -#define PHY_UPPER_SHIFT 21 -#define BM_PHY_REG(page, reg) \ - (((reg) & MAX_PHY_REG_ADDRESS) |\ - (((page) & 0xFFFF) << PHY_PAGE_SHIFT) |\ - (((reg) & ~MAX_PHY_REG_ADDRESS) << (PHY_UPPER_SHIFT - PHY_PAGE_SHIFT))) - -/* PHY Wakeup Registers and defines */ -#define BM_PORT_GEN_CFG PHY_REG(BM_PORT_CTRL_PAGE, 17) -#define BM_RCTL PHY_REG(BM_WUC_PAGE, 0) -#define BM_WUC PHY_REG(BM_WUC_PAGE, 1) -#define BM_WUFC PHY_REG(BM_WUC_PAGE, 2) -#define BM_WUS PHY_REG(BM_WUC_PAGE, 3) -#define BM_RAR_L(_i) (BM_PHY_REG(BM_WUC_PAGE, 16 + ((_i) << 2))) -#define BM_RAR_M(_i) (BM_PHY_REG(BM_WUC_PAGE, 17 + ((_i) << 2))) -#define BM_RAR_H(_i) (BM_PHY_REG(BM_WUC_PAGE, 18 + ((_i) << 2))) -#define BM_RAR_CTRL(_i) (BM_PHY_REG(BM_WUC_PAGE, 19 + ((_i) << 2))) -#define BM_MTA(_i) (BM_PHY_REG(BM_WUC_PAGE, 128 + ((_i) << 1))) - -#define BM_RCTL_UPE 0x0001 /* Unicast Promiscuous Mode */ -#define BM_RCTL_MPE 0x0002 /* Multicast Promiscuous Mode */ -#define BM_RCTL_MO_SHIFT 3 /* Multicast Offset Shift */ -#define BM_RCTL_MO_MASK (3 << 3) /* Multicast Offset Mask */ -#define BM_RCTL_BAM 0x0020 /* Broadcast Accept Mode */ -#define BM_RCTL_PMCF 0x0040 /* Pass MAC Control Frames */ -#define BM_RCTL_RFCE 0x0080 /* Rx Flow Control Enable */ - -#define HV_STATS_PAGE 778 -#define HV_SCC_UPPER PHY_REG(HV_STATS_PAGE, 16) /* Single Collision Count */ -#define HV_SCC_LOWER PHY_REG(HV_STATS_PAGE, 17) -#define HV_ECOL_UPPER PHY_REG(HV_STATS_PAGE, 18) /* Excessive Coll. Count */ -#define HV_ECOL_LOWER PHY_REG(HV_STATS_PAGE, 19) -#define HV_MCC_UPPER PHY_REG(HV_STATS_PAGE, 20) /* Multiple Coll. Count */ -#define HV_MCC_LOWER PHY_REG(HV_STATS_PAGE, 21) -#define HV_LATECOL_UPPER PHY_REG(HV_STATS_PAGE, 23) /* Late Collision Count */ -#define HV_LATECOL_LOWER PHY_REG(HV_STATS_PAGE, 24) -#define HV_COLC_UPPER PHY_REG(HV_STATS_PAGE, 25) /* Collision Count */ -#define HV_COLC_LOWER PHY_REG(HV_STATS_PAGE, 26) -#define HV_DC_UPPER PHY_REG(HV_STATS_PAGE, 27) /* Defer Count */ -#define HV_DC_LOWER PHY_REG(HV_STATS_PAGE, 28) -#define HV_TNCRS_UPPER PHY_REG(HV_STATS_PAGE, 29) /* Transmit with no CRS */ -#define HV_TNCRS_LOWER PHY_REG(HV_STATS_PAGE, 30) - -#define E1000_FCRTV_PCH 0x05F40 /* PCH Flow Control Refresh Timer Value */ - -/* BM PHY Copper Specific Status */ -#define BM_CS_STATUS 17 -#define BM_CS_STATUS_LINK_UP 0x0400 -#define BM_CS_STATUS_RESOLVED 0x0800 -#define BM_CS_STATUS_SPEED_MASK 0xC000 -#define BM_CS_STATUS_SPEED_1000 0x8000 - -/* 82577 Mobile Phy Status Register */ -#define HV_M_STATUS 26 -#define HV_M_STATUS_AUTONEG_COMPLETE 0x1000 -#define HV_M_STATUS_SPEED_MASK 0x0300 -#define HV_M_STATUS_SPEED_1000 0x0200 -#define HV_M_STATUS_LINK_UP 0x0040 - -#define E1000_ICH_FWSM_PCIM2PCI 0x01000000 /* ME PCIm-to-PCI active */ -#define E1000_ICH_FWSM_PCIM2PCI_COUNT 2000 - /* Time to wait before putting the device into D3 if there's no link (in ms). */ #define LINK_TIMEOUT 100 @@ -309,6 +246,8 @@ struct e1000_adapter { struct napi_struct napi; + unsigned int uncorr_errors; /* uncorrectable ECC errors */ + unsigned int corr_errors; /* correctable ECC errors */ unsigned int restart_queue; u32 txd_cmd; @@ -353,6 +292,7 @@ struct e1000_adapter { u64 gorc_old; u32 alloc_rx_buff_failed; u32 rx_dma_failed; + u32 rx_hwtstamp_cleared; unsigned int rx_ps_pages; u16 rx_ps_bsize0; @@ -366,7 +306,7 @@ struct e1000_adapter { /* structs defined in e1000_hw.h */ struct e1000_hw hw; - spinlock_t stats64_lock; + spinlock_t stats64_lock; /* protects statistics counters */ struct e1000_hw_stats stats; struct e1000_phy_info phy_info; struct e1000_phy_stats phy_stats; @@ -402,6 +342,16 @@ struct e1000_adapter { u16 tx_ring_count; u16 rx_ring_count; + + struct hwtstamp_config hwtstamp_config; + struct delayed_work systim_overflow_work; + struct sk_buff *tx_hwtstamp_skb; + struct work_struct tx_hwtstamp_work; + spinlock_t systim_lock; /* protects SYSTIML/H regsters */ + struct cyclecounter cc; + struct timecounter tc; + struct ptp_clock *ptp_clock; + struct ptp_clock_info ptp_clock_info; }; struct e1000_info { @@ -416,6 +366,40 @@ struct e1000_info { const struct e1000_nvm_operations *nvm_ops; }; +s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca); + +/* The system time is maintained by a 64-bit counter comprised of the 32-bit + * SYSTIMH and SYSTIML registers. How the counter increments (and therefore + * its resolution) is based on the contents of the TIMINCA register - it + * increments every incperiod (bits 31:24) clock ticks by incvalue (bits 23:0). + * For the best accuracy, the incperiod should be as small as possible. The + * incvalue is scaled by a factor as large as possible (while still fitting + * in bits 23:0) so that relatively small clock corrections can be made. + * + * As a result, a shift of INCVALUE_SHIFT_n is used to fit a value of + * INCVALUE_n into the TIMINCA register allowing 32+8+(24-INCVALUE_SHIFT_n) + * bits to count nanoseconds leaving the rest for fractional nonseconds. + */ +#define INCVALUE_96MHz 125 +#define INCVALUE_SHIFT_96MHz 17 +#define INCPERIOD_SHIFT_96MHz 2 +#define INCPERIOD_96MHz (12 >> INCPERIOD_SHIFT_96MHz) + +#define INCVALUE_25MHz 40 +#define INCVALUE_SHIFT_25MHz 18 +#define INCPERIOD_25MHz 1 + +/* Another drawback of scaling the incvalue by a large factor is the + * 64-bit SYSTIM register overflows more quickly. This is dealt with + * by simply reading the clock before it overflows. + * + * Clock ns bits Overflows after + * ~~~~~~ ~~~~~~~ ~~~~~~~~~~~~~~~ + * 96MHz 47-bit 2^(47-INCPERIOD_SHIFT_96MHz) / 10^9 / 3600 = 9.77 hrs + * 25MHz 46-bit 2^46 / 10^9 / 3600 = 19.55 hours + */ +#define E1000_SYSTIM_OVERFLOW_PERIOD (HZ * 60 * 60 * 4) + /* hardware capability, feature, and workaround flags */ #define FLAG_HAS_AMT (1 << 0) #define FLAG_HAS_FLASH (1 << 1) @@ -431,7 +415,7 @@ struct e1000_info { #define FLAG_HAS_SMART_POWER_DOWN (1 << 11) #define FLAG_IS_QUAD_PORT_A (1 << 12) #define FLAG_IS_QUAD_PORT (1 << 13) -/* reserved bit14 */ +#define FLAG_HAS_HW_TIMESTAMP (1 << 14) #define FLAG_APME_IN_WUC (1 << 15) #define FLAG_APME_IN_CTRL3 (1 << 16) #define FLAG_APME_CHECK_PORT_B (1 << 17) @@ -447,7 +431,7 @@ struct e1000_info { #define FLAG_MSI_ENABLED (1 << 27) /* reserved (1 << 28) */ #define FLAG_TSO_FORCE (1 << 29) -#define FLAG_RX_RESTART_NOW (1 << 30) +#define FLAG_RESTART_NOW (1 << 30) #define FLAG_MSI_TEST_FAILED (1 << 31) #define FLAG2_CRC_STRIPPING (1 << 0) @@ -463,6 +447,7 @@ struct e1000_info { #define FLAG2_NO_DISABLE_RX (1 << 10) #define FLAG2_PCIM2PCI_ARBITER_WA (1 << 11) #define FLAG2_DFLT_CRC_STRIPPING (1 << 12) +#define FLAG2_CHECK_RX_HWTSTAMP (1 << 13) #define E1000_RX_DESC_PS(R, i) \ (&(((union e1000_rx_desc_packet_split *)((R).desc))[i])) @@ -512,8 +497,6 @@ extern void e1000e_write_itr(struct e1000_adapter *adapter, u32 itr); extern unsigned int copybreak; -extern char *e1000e_get_hw_dev_name(struct e1000_hw *hw); - extern const struct e1000_info e1000_82571_info; extern const struct e1000_info e1000_82572_info; extern const struct e1000_info e1000_82573_info; @@ -527,138 +510,8 @@ extern const struct e1000_info e1000_pch2_info; extern const struct e1000_info e1000_pch_lpt_info; extern const struct e1000_info e1000_es2_info; -extern s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num, - u32 pba_num_size); - -extern s32 e1000e_commit_phy(struct e1000_hw *hw); - -extern bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw); - -extern bool e1000e_get_laa_state_82571(struct e1000_hw *hw); -extern void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state); - -extern void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw); -extern void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw, - bool state); -extern void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw); -extern void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw); -extern void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw); -extern void e1000_resume_workarounds_pchlan(struct e1000_hw *hw); -extern s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable); -extern s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable); -extern void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw); - -extern s32 e1000e_check_for_copper_link(struct e1000_hw *hw); -extern s32 e1000e_check_for_fiber_link(struct e1000_hw *hw); -extern s32 e1000e_check_for_serdes_link(struct e1000_hw *hw); -extern s32 e1000e_setup_led_generic(struct e1000_hw *hw); -extern s32 e1000e_cleanup_led_generic(struct e1000_hw *hw); -extern s32 e1000e_led_on_generic(struct e1000_hw *hw); -extern s32 e1000e_led_off_generic(struct e1000_hw *hw); -extern s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw); -extern void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw); -extern void e1000_set_lan_id_single_port(struct e1000_hw *hw); -extern s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *duplex); -extern s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw, u16 *speed, u16 *duplex); -extern s32 e1000e_disable_pcie_master(struct e1000_hw *hw); -extern s32 e1000e_get_auto_rd_done(struct e1000_hw *hw); -extern s32 e1000e_id_led_init_generic(struct e1000_hw *hw); -extern void e1000e_clear_hw_cntrs_base(struct e1000_hw *hw); -extern s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw); -extern s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw); -extern s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw); -extern s32 e1000e_setup_link_generic(struct e1000_hw *hw); -extern void e1000_clear_vfta_generic(struct e1000_hw *hw); -extern void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count); -extern void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw, - u8 *mc_addr_list, - u32 mc_addr_count); -extern void e1000e_rar_set_generic(struct e1000_hw *hw, u8 *addr, u32 index); -extern s32 e1000e_set_fc_watermarks(struct e1000_hw *hw); -extern void e1000e_set_pcie_no_snoop(struct e1000_hw *hw, u32 no_snoop); -extern s32 e1000e_get_hw_semaphore(struct e1000_hw *hw); -extern s32 e1000e_valid_led_default(struct e1000_hw *hw, u16 *data); -extern void e1000e_config_collision_dist_generic(struct e1000_hw *hw); -extern s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw); -extern s32 e1000e_force_mac_fc(struct e1000_hw *hw); -extern s32 e1000e_blink_led_generic(struct e1000_hw *hw); -extern void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value); -extern s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw); -extern void e1000e_reset_adaptive(struct e1000_hw *hw); -extern void e1000e_update_adaptive(struct e1000_hw *hw); - -extern s32 e1000e_setup_copper_link(struct e1000_hw *hw); -extern s32 e1000e_get_phy_id(struct e1000_hw *hw); -extern void e1000e_put_hw_semaphore(struct e1000_hw *hw); -extern s32 e1000e_check_reset_block_generic(struct e1000_hw *hw); -extern s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw); -extern s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw); -extern s32 e1000e_get_phy_info_igp(struct e1000_hw *hw); -extern s32 e1000_set_page_igp(struct e1000_hw *hw, u16 page); -extern s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data); -extern s32 e1000e_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, - u16 *data); -extern s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw); -extern s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active); -extern s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data); -extern s32 e1000e_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, - u16 data); -extern s32 e1000e_phy_sw_reset(struct e1000_hw *hw); -extern s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw); -extern s32 e1000e_get_cfg_done(struct e1000_hw *hw); -extern s32 e1000e_get_cable_length_m88(struct e1000_hw *hw); -extern s32 e1000e_get_phy_info_m88(struct e1000_hw *hw); -extern s32 e1000e_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data); -extern s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data); -extern s32 e1000e_phy_init_script_igp3(struct e1000_hw *hw); -extern enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id); -extern s32 e1000e_determine_phy_address(struct e1000_hw *hw); -extern s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data); -extern s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data); -extern s32 e1000_enable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, - u16 *phy_reg); -extern s32 e1000_disable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, - u16 *phy_reg); -extern s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data); -extern s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data); -extern void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl); -extern s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data); -extern s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, - u16 data); -extern s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data); -extern s32 e1000e_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, - u16 *data); -extern s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations, - u32 usec_interval, bool *success); -extern s32 e1000e_phy_reset_dsp(struct e1000_hw *hw); -extern void e1000_power_up_phy_copper(struct e1000_hw *hw); -extern void e1000_power_down_phy_copper(struct e1000_hw *hw); -extern s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data); -extern s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data); -extern s32 e1000e_check_downshift(struct e1000_hw *hw); -extern s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data); -extern s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, - u16 *data); -extern s32 e1000_read_phy_reg_page_hv(struct e1000_hw *hw, u32 offset, - u16 *data); -extern s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data); -extern s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, - u16 data); -extern s32 e1000_write_phy_reg_page_hv(struct e1000_hw *hw, u32 offset, - u16 data); -extern s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw); -extern s32 e1000_copper_link_setup_82577(struct e1000_hw *hw); -extern s32 e1000_check_polarity_82577(struct e1000_hw *hw); -extern s32 e1000_get_phy_info_82577(struct e1000_hw *hw); -extern s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw); -extern s32 e1000_get_cable_length_82577(struct e1000_hw *hw); - -extern s32 e1000_check_polarity_m88(struct e1000_hw *hw); -extern s32 e1000_get_phy_info_ife(struct e1000_hw *hw); -extern s32 e1000_check_polarity_ife(struct e1000_hw *hw); -extern s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw); -extern s32 e1000_check_polarity_igp(struct e1000_hw *hw); -extern bool e1000_check_phy_82574(struct e1000_hw *hw); +extern void e1000e_ptp_init(struct e1000_adapter *adapter); +extern void e1000e_ptp_remove(struct e1000_adapter *adapter); static inline s32 e1000_phy_hw_reset(struct e1000_hw *hw) { @@ -685,20 +538,7 @@ static inline s32 e1e_wphy_locked(struct e1000_hw *hw, u32 offset, u16 data) return hw->phy.ops.write_reg_locked(hw, offset, data); } -static inline s32 e1000_get_cable_length(struct e1000_hw *hw) -{ - return hw->phy.ops.get_cable_length(hw); -} - -extern s32 e1000e_acquire_nvm(struct e1000_hw *hw); -extern s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); -extern s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw); -extern s32 e1000e_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg); -extern s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); -extern s32 e1000e_validate_nvm_checksum_generic(struct e1000_hw *hw); -extern void e1000e_release_nvm(struct e1000_hw *hw); extern void e1000e_reload_nvm_generic(struct e1000_hw *hw); -extern s32 e1000_read_mac_addr_generic(struct e1000_hw *hw); static inline s32 e1000e_read_mac_addr(struct e1000_hw *hw) { @@ -733,10 +573,6 @@ static inline s32 e1000_get_phy_info(struct e1000_hw *hw) return hw->phy.ops.get_info(hw); } -extern bool e1000e_check_mng_mode_generic(struct e1000_hw *hw); -extern bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw); -extern s32 e1000e_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length); - static inline u32 __er32(struct e1000_hw *hw, unsigned long reg) { return readl(hw->hw_addr + reg); diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c index f95bc6ee1c2..2c1813737f6 100644 --- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -35,6 +35,7 @@ #include <linux/slab.h> #include <linux/delay.h> #include <linux/vmalloc.h> +#include <linux/mdio.h> #include "e1000.h" @@ -98,7 +99,6 @@ static const struct e1000_stats e1000_gstrings_stats[] = { E1000_STAT("rx_flow_control_xoff", stats.xoffrxc), E1000_STAT("tx_flow_control_xon", stats.xontxc), E1000_STAT("tx_flow_control_xoff", stats.xofftxc), - E1000_STAT("rx_long_byte_count", stats.gorc), E1000_STAT("rx_csum_offload_good", hw_csum_good), E1000_STAT("rx_csum_offload_errors", hw_csum_err), E1000_STAT("rx_header_split", rx_hdr_split), @@ -108,6 +108,9 @@ static const struct e1000_stats e1000_gstrings_stats[] = { E1000_STAT("dropped_smbus", stats.mgpdc), E1000_STAT("rx_dma_failed", rx_dma_failed), E1000_STAT("tx_dma_failed", tx_dma_failed), + E1000_STAT("rx_hwtstamp_cleared", rx_hwtstamp_cleared), + E1000_STAT("uncorr_ecc_errors", uncorr_errors), + E1000_STAT("corr_ecc_errors", corr_errors), }; #define E1000_GLOBAL_STATS_LEN ARRAY_SIZE(e1000_gstrings_stats) @@ -127,7 +130,6 @@ static int e1000_get_settings(struct net_device *netdev, u32 speed; if (hw->phy.media_type == e1000_media_type_copper) { - ecmd->supported = (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Half | @@ -325,12 +327,12 @@ static int e1000_set_settings(struct net_device *netdev, } /* reset the link */ - if (netif_running(adapter->netdev)) { e1000e_down(adapter); e1000e_up(adapter); - } else + } else { e1000e_reset(adapter); + } clear_bit(__E1000_RESETTING, &adapter->state); return 0; @@ -415,7 +417,7 @@ static void e1000_set_msglevel(struct net_device *netdev, u32 data) adapter->msg_enable = data; } -static int e1000_get_regs_len(struct net_device *netdev) +static int e1000_get_regs_len(struct net_device __always_unused *netdev) { #define E1000_REGS_LEN 32 /* overestimate */ return E1000_REGS_LEN * sizeof(u32); @@ -469,10 +471,10 @@ static void e1000_get_regs(struct net_device *netdev, regs_buff[22] = adapter->phy_stats.receive_errors; regs_buff[23] = regs_buff[13]; /* mdix mode */ } - regs_buff[21] = 0; /* was idle_errors */ - e1e_rphy(hw, PHY_1000T_STATUS, &phy_data); - regs_buff[24] = (u32)phy_data; /* phy local receiver status */ - regs_buff[25] = regs_buff[24]; /* phy remote receiver status */ + regs_buff[21] = 0; /* was idle_errors */ + e1e_rphy(hw, MII_STAT1000, &phy_data); + regs_buff[24] = (u32)phy_data; /* phy local receiver status */ + regs_buff[25] = regs_buff[24]; /* phy remote receiver status */ } static int e1000_get_eeprom_len(struct net_device *netdev) @@ -759,8 +761,9 @@ static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data, (test[pat] & write)); val = E1000_READ_REG_ARRAY(&adapter->hw, reg, offset); if (val != (test[pat] & write & mask)) { - e_err("pattern test reg %04X failed: got 0x%08X expected 0x%08X\n", - reg + offset, val, (test[pat] & write & mask)); + e_err("pattern test failed (reg 0x%05X): got 0x%08X expected 0x%08X\n", + reg + (offset << 2), val, + (test[pat] & write & mask)); *data = reg; return 1; } @@ -775,7 +778,7 @@ static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data, __ew32(&adapter->hw, reg, write & mask); val = __er32(&adapter->hw, reg); if ((write & mask) != (val & mask)) { - e_err("set/check reg %04X test failed: got 0x%08X expected 0x%08X\n", + e_err("set/check test failed (reg 0x%05X): got 0x%08X expected 0x%08X\n", reg, (val & mask), (write & mask)); *data = reg; return 1; @@ -883,12 +886,20 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) E1000_FWSM_WLOCK_MAC_SHIFT; for (i = 0; i < mac->rar_entry_count; i++) { - /* Cannot test write-protected SHRAL[n] registers */ - if ((wlock_mac == 1) || (wlock_mac && (i > wlock_mac))) - continue; + if (mac->type == e1000_pch_lpt) { + /* Cannot test write-protected SHRAL[n] registers */ + if ((wlock_mac == 1) || (wlock_mac && (i > wlock_mac))) + continue; - REG_PATTERN_TEST_ARRAY(E1000_RA, ((i << 1) + 1), - mask, 0xFFFFFFFF); + /* SHRAH[9] different than the others */ + if (i == 10) + mask |= (1 << 30); + else + mask &= ~(1 << 30); + } + + REG_PATTERN_TEST_ARRAY(E1000_RA, ((i << 1) + 1), mask, + 0xFFFFFFFF); } for (i = 0; i < mac->mta_reg_count; i++) @@ -922,7 +933,7 @@ static int e1000_eeprom_test(struct e1000_adapter *adapter, u64 *data) return *data; } -static irqreturn_t e1000_test_intr(int irq, void *data) +static irqreturn_t e1000_test_intr(int __always_unused irq, void *data) { struct net_device *netdev = (struct net_device *) data; struct e1000_adapter *adapter = netdev_priv(netdev); @@ -1272,7 +1283,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) if (hw->phy.type == e1000_phy_ife) { /* force 100, set loopback */ - e1e_wphy(hw, PHY_CONTROL, 0x6100); + e1e_wphy(hw, MII_BMCR, 0x6100); /* Now set up the MAC to the same speed/duplex as the PHY. */ ctrl_reg = er32(CTRL); @@ -1295,9 +1306,9 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) /* Auto-MDI/MDIX Off */ e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, 0x0808); /* reset to update Auto-MDI/MDIX */ - e1e_wphy(hw, PHY_CONTROL, 0x9140); + e1e_wphy(hw, MII_BMCR, 0x9140); /* autoneg off */ - e1e_wphy(hw, PHY_CONTROL, 0x8140); + e1e_wphy(hw, MII_BMCR, 0x8140); break; case e1000_phy_gg82563: e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, 0x1CC); @@ -1309,7 +1320,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) phy_reg |= 0x006; e1e_wphy(hw, PHY_REG(2, 21), phy_reg); /* Assert SW reset for above settings to take effect */ - e1000e_commit_phy(hw); + hw->phy.ops.commit(hw); mdelay(1); /* Force Full Duplex */ e1e_rphy(hw, PHY_REG(769, 16), &phy_reg); @@ -1343,7 +1354,6 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) e1e_rphy(hw, PHY_REG(776, 18), &phy_reg); e1e_wphy(hw, PHY_REG(776, 18), phy_reg | 1); /* Enable loopback on the PHY */ -#define I82577_PHY_LBK_CTRL 19 e1e_wphy(hw, I82577_PHY_LBK_CTRL, 0x8001); break; default: @@ -1351,7 +1361,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) } /* force 1000, set loopback */ - e1e_wphy(hw, PHY_CONTROL, 0x4140); + e1e_wphy(hw, MII_BMCR, 0x4140); mdelay(250); /* Now set up the MAC to the same speed/duplex as the PHY. */ @@ -1393,7 +1403,7 @@ static int e1000_set_82571_fiber_loopback(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; u32 ctrl = er32(CTRL); - int link = 0; + int link; /* special requirements for 82571/82572 fiber adapters */ @@ -1526,11 +1536,12 @@ static void e1000_loopback_cleanup(struct e1000_adapter *adapter) hw->mac.autoneg = 1; if (hw->phy.type == e1000_phy_gg82563) e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, 0x180); - e1e_rphy(hw, PHY_CONTROL, &phy_reg); - if (phy_reg & MII_CR_LOOPBACK) { - phy_reg &= ~MII_CR_LOOPBACK; - e1e_wphy(hw, PHY_CONTROL, phy_reg); - e1000e_commit_phy(hw); + e1e_rphy(hw, MII_BMCR, &phy_reg); + if (phy_reg & BMCR_LOOPBACK) { + phy_reg &= ~BMCR_LOOPBACK; + e1e_wphy(hw, MII_BMCR, phy_reg); + if (hw->phy.ops.commit) + hw->phy.ops.commit(hw); } break; } @@ -1692,7 +1703,8 @@ static int e1000_link_test(struct e1000_adapter *adapter, u64 *data) return *data; } -static int e1000e_get_sset_count(struct net_device *netdev, int sset) +static int e1000e_get_sset_count(struct net_device __always_unused *netdev, + int sset) { switch (sset) { case ETH_SS_TEST: @@ -1955,7 +1967,7 @@ static int e1000_nway_reset(struct net_device *netdev) } static void e1000_get_ethtool_stats(struct net_device *netdev, - struct ethtool_stats *stats, + struct ethtool_stats __always_unused *stats, u64 *data) { struct e1000_adapter *adapter = netdev_priv(netdev); @@ -1984,8 +1996,8 @@ static void e1000_get_ethtool_stats(struct net_device *netdev, } } -static void e1000_get_strings(struct net_device *netdev, u32 stringset, - u8 *data) +static void e1000_get_strings(struct net_device __always_unused *netdev, + u32 stringset, u8 *data) { u8 *p = data; int i; @@ -2005,7 +2017,8 @@ static void e1000_get_strings(struct net_device *netdev, u32 stringset, } static int e1000_get_rxnfc(struct net_device *netdev, - struct ethtool_rxnfc *info, u32 *rule_locs) + struct ethtool_rxnfc *info, + u32 __always_unused *rule_locs) { info->data = 0; @@ -2051,6 +2064,171 @@ static int e1000_get_rxnfc(struct net_device *netdev, } } +static int e1000e_get_eee(struct net_device *netdev, struct ethtool_eee *edata) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u16 cap_addr, adv_addr, lpa_addr, pcs_stat_addr, phy_data, lpi_ctrl; + u32 status, ret_val; + + if (!(adapter->flags & FLAG_IS_ICH) || + !(adapter->flags2 & FLAG2_HAS_EEE)) + return -EOPNOTSUPP; + + switch (hw->phy.type) { + case e1000_phy_82579: + cap_addr = I82579_EEE_CAPABILITY; + adv_addr = I82579_EEE_ADVERTISEMENT; + lpa_addr = I82579_EEE_LP_ABILITY; + pcs_stat_addr = I82579_EEE_PCS_STATUS; + break; + case e1000_phy_i217: + cap_addr = I217_EEE_CAPABILITY; + adv_addr = I217_EEE_ADVERTISEMENT; + lpa_addr = I217_EEE_LP_ABILITY; + pcs_stat_addr = I217_EEE_PCS_STATUS; + break; + default: + return -EOPNOTSUPP; + } + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return -EBUSY; + + /* EEE Capability */ + ret_val = e1000_read_emi_reg_locked(hw, cap_addr, &phy_data); + if (ret_val) + goto release; + edata->supported = mmd_eee_cap_to_ethtool_sup_t(phy_data); + + /* EEE Advertised */ + ret_val = e1000_read_emi_reg_locked(hw, adv_addr, &phy_data); + if (ret_val) + goto release; + edata->advertised = mmd_eee_adv_to_ethtool_adv_t(phy_data); + + /* EEE Link Partner Advertised */ + ret_val = e1000_read_emi_reg_locked(hw, lpa_addr, &phy_data); + if (ret_val) + goto release; + edata->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(phy_data); + + /* EEE PCS Status */ + ret_val = e1000_read_emi_reg_locked(hw, pcs_stat_addr, &phy_data); + if (hw->phy.type == e1000_phy_82579) + phy_data <<= 8; + +release: + hw->phy.ops.release(hw); + if (ret_val) + return -ENODATA; + + e1e_rphy(hw, I82579_LPI_CTRL, &lpi_ctrl); + status = er32(STATUS); + + /* Result of the EEE auto negotiation - there is no register that + * has the status of the EEE negotiation so do a best-guess based + * on whether both Tx and Rx LPI indications have been received or + * base it on the link speed, the EEE advertised speeds on both ends + * and the speeds on which EEE is enabled locally. + */ + if (((phy_data & E1000_EEE_TX_LPI_RCVD) && + (phy_data & E1000_EEE_RX_LPI_RCVD)) || + ((status & E1000_STATUS_SPEED_100) && + (edata->advertised & ADVERTISED_100baseT_Full) && + (edata->lp_advertised & ADVERTISED_100baseT_Full) && + (lpi_ctrl & I82579_LPI_CTRL_100_ENABLE)) || + ((status & E1000_STATUS_SPEED_1000) && + (edata->advertised & ADVERTISED_1000baseT_Full) && + (edata->lp_advertised & ADVERTISED_1000baseT_Full) && + (lpi_ctrl & I82579_LPI_CTRL_1000_ENABLE))) + edata->eee_active = true; + + edata->eee_enabled = !hw->dev_spec.ich8lan.eee_disable; + edata->tx_lpi_enabled = true; + edata->tx_lpi_timer = er32(LPIC) >> E1000_LPIC_LPIET_SHIFT; + + return 0; +} + +static int e1000e_set_eee(struct net_device *netdev, struct ethtool_eee *edata) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + struct ethtool_eee eee_curr; + s32 ret_val; + + if (!(adapter->flags & FLAG_IS_ICH) || + !(adapter->flags2 & FLAG2_HAS_EEE)) + return -EOPNOTSUPP; + + ret_val = e1000e_get_eee(netdev, &eee_curr); + if (ret_val) + return ret_val; + + if (eee_curr.advertised != edata->advertised) { + e_err("Setting EEE advertisement is not supported\n"); + return -EINVAL; + } + + if (eee_curr.tx_lpi_enabled != edata->tx_lpi_enabled) { + e_err("Setting EEE tx-lpi is not supported\n"); + return -EINVAL; + } + + if (eee_curr.tx_lpi_timer != edata->tx_lpi_timer) { + e_err("Setting EEE Tx LPI timer is not supported\n"); + return -EINVAL; + } + + if (hw->dev_spec.ich8lan.eee_disable != !edata->eee_enabled) { + hw->dev_spec.ich8lan.eee_disable = !edata->eee_enabled; + + /* reset the link */ + if (netif_running(netdev)) + e1000e_reinit_locked(adapter); + else + e1000e_reset(adapter); + } + + return 0; +} + +static int e1000e_get_ts_info(struct net_device *netdev, + struct ethtool_ts_info *info) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + + ethtool_op_get_ts_info(netdev, info); + + if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP)) + return 0; + + info->so_timestamping |= (SOF_TIMESTAMPING_TX_HARDWARE | + SOF_TIMESTAMPING_RX_HARDWARE | + SOF_TIMESTAMPING_RAW_HARDWARE); + + info->tx_types = (1 << HWTSTAMP_TX_OFF) | (1 << HWTSTAMP_TX_ON); + + info->rx_filters = ((1 << HWTSTAMP_FILTER_NONE) | + (1 << HWTSTAMP_FILTER_PTP_V1_L4_SYNC) | + (1 << HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ) | + (1 << HWTSTAMP_FILTER_PTP_V2_L4_SYNC) | + (1 << HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ) | + (1 << HWTSTAMP_FILTER_PTP_V2_L2_SYNC) | + (1 << HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ) | + (1 << HWTSTAMP_FILTER_PTP_V2_EVENT) | + (1 << HWTSTAMP_FILTER_PTP_V2_SYNC) | + (1 << HWTSTAMP_FILTER_PTP_V2_DELAY_REQ) | + (1 << HWTSTAMP_FILTER_ALL)); + + if (adapter->ptp_clock) + info->phc_index = ptp_clock_index(adapter->ptp_clock); + + return 0; +} + static const struct ethtool_ops e1000_ethtool_ops = { .get_settings = e1000_get_settings, .set_settings = e1000_set_settings, @@ -2078,7 +2256,9 @@ static const struct ethtool_ops e1000_ethtool_ops = { .get_coalesce = e1000_get_coalesce, .set_coalesce = e1000_set_coalesce, .get_rxnfc = e1000_get_rxnfc, - .get_ts_info = ethtool_op_get_ts_info, + .get_ts_info = e1000e_get_ts_info, + .get_eee = e1000e_get_eee, + .set_eee = e1000e_set_eee, }; void e1000e_set_ethtool_ops(struct net_device *netdev) diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h index cf217777586..1e6b889aee8 100644 --- a/drivers/net/ethernet/intel/e1000e/hw.h +++ b/drivers/net/ethernet/intel/e1000e/hw.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -29,331 +29,10 @@ #ifndef _E1000_HW_H_ #define _E1000_HW_H_ -#include <linux/types.h> - -struct e1000_hw; -struct e1000_adapter; - +#include "regs.h" #include "defines.h" -enum e1e_registers { - E1000_CTRL = 0x00000, /* Device Control - RW */ - E1000_STATUS = 0x00008, /* Device Status - RO */ - E1000_EECD = 0x00010, /* EEPROM/Flash Control - RW */ - E1000_EERD = 0x00014, /* EEPROM Read - RW */ - E1000_CTRL_EXT = 0x00018, /* Extended Device Control - RW */ - E1000_FLA = 0x0001C, /* Flash Access - RW */ - E1000_MDIC = 0x00020, /* MDI Control - RW */ - E1000_SCTL = 0x00024, /* SerDes Control - RW */ - E1000_FCAL = 0x00028, /* Flow Control Address Low - RW */ - E1000_FCAH = 0x0002C, /* Flow Control Address High -RW */ - E1000_FEXTNVM4 = 0x00024, /* Future Extended NVM 4 - RW */ - E1000_FEXTNVM = 0x00028, /* Future Extended NVM - RW */ - E1000_FCT = 0x00030, /* Flow Control Type - RW */ - E1000_VET = 0x00038, /* VLAN Ether Type - RW */ - E1000_FEXTNVM3 = 0x0003C, /* Future Extended NVM 3 - RW */ - E1000_ICR = 0x000C0, /* Interrupt Cause Read - R/clr */ - E1000_ITR = 0x000C4, /* Interrupt Throttling Rate - RW */ - E1000_ICS = 0x000C8, /* Interrupt Cause Set - WO */ - E1000_IMS = 0x000D0, /* Interrupt Mask Set - RW */ - E1000_IMC = 0x000D8, /* Interrupt Mask Clear - WO */ - E1000_EIAC_82574 = 0x000DC, /* Ext. Interrupt Auto Clear - RW */ - E1000_IAM = 0x000E0, /* Interrupt Acknowledge Auto Mask */ - E1000_IVAR = 0x000E4, /* Interrupt Vector Allocation - RW */ - E1000_EITR_82574_BASE = 0x000E8, /* Interrupt Throttling - RW */ -#define E1000_EITR_82574(_n) (E1000_EITR_82574_BASE + (_n << 2)) - E1000_RCTL = 0x00100, /* Rx Control - RW */ - E1000_FCTTV = 0x00170, /* Flow Control Transmit Timer Value - RW */ - E1000_TXCW = 0x00178, /* Tx Configuration Word - RW */ - E1000_RXCW = 0x00180, /* Rx Configuration Word - RO */ - E1000_TCTL = 0x00400, /* Tx Control - RW */ - E1000_TCTL_EXT = 0x00404, /* Extended Tx Control - RW */ - E1000_TIPG = 0x00410, /* Tx Inter-packet gap -RW */ - E1000_AIT = 0x00458, /* Adaptive Interframe Spacing Throttle -RW */ - E1000_LEDCTL = 0x00E00, /* LED Control - RW */ - E1000_EXTCNF_CTRL = 0x00F00, /* Extended Configuration Control */ - E1000_EXTCNF_SIZE = 0x00F08, /* Extended Configuration Size */ - E1000_PHY_CTRL = 0x00F10, /* PHY Control Register in CSR */ -#define E1000_POEMB E1000_PHY_CTRL /* PHY OEM Bits */ - E1000_PBA = 0x01000, /* Packet Buffer Allocation - RW */ - E1000_PBS = 0x01008, /* Packet Buffer Size */ - E1000_EEMNGCTL = 0x01010, /* MNG EEprom Control */ - E1000_EEWR = 0x0102C, /* EEPROM Write Register - RW */ - E1000_FLOP = 0x0103C, /* FLASH Opcode Register */ - E1000_PBA_ECC = 0x01100, /* PBA ECC Register */ - E1000_ERT = 0x02008, /* Early Rx Threshold - RW */ - E1000_FCRTL = 0x02160, /* Flow Control Receive Threshold Low - RW */ - E1000_FCRTH = 0x02168, /* Flow Control Receive Threshold High - RW */ - E1000_PSRCTL = 0x02170, /* Packet Split Receive Control - RW */ -/* Convenience macros - * - * Note: "_n" is the queue number of the register to be written to. - * - * Example usage: - * E1000_RDBAL(current_rx_queue) - */ - E1000_RDBAL_BASE = 0x02800, /* Rx Descriptor Base Address Low - RW */ -#define E1000_RDBAL(_n) (E1000_RDBAL_BASE + (_n << 8)) - E1000_RDBAH_BASE = 0x02804, /* Rx Descriptor Base Address High - RW */ -#define E1000_RDBAH(_n) (E1000_RDBAH_BASE + (_n << 8)) - E1000_RDLEN_BASE = 0x02808, /* Rx Descriptor Length - RW */ -#define E1000_RDLEN(_n) (E1000_RDLEN_BASE + (_n << 8)) - E1000_RDH_BASE = 0x02810, /* Rx Descriptor Head - RW */ -#define E1000_RDH(_n) (E1000_RDH_BASE + (_n << 8)) - E1000_RDT_BASE = 0x02818, /* Rx Descriptor Tail - RW */ -#define E1000_RDT(_n) (E1000_RDT_BASE + (_n << 8)) - E1000_RDTR = 0x02820, /* Rx Delay Timer - RW */ - E1000_RXDCTL_BASE = 0x02828, /* Rx Descriptor Control - RW */ -#define E1000_RXDCTL(_n) (E1000_RXDCTL_BASE + (_n << 8)) - E1000_RADV = 0x0282C, /* Rx Interrupt Absolute Delay Timer - RW */ - - E1000_KABGTXD = 0x03004, /* AFE Band Gap Transmit Ref Data */ - E1000_TDBAL_BASE = 0x03800, /* Tx Descriptor Base Address Low - RW */ -#define E1000_TDBAL(_n) (E1000_TDBAL_BASE + (_n << 8)) - E1000_TDBAH_BASE = 0x03804, /* Tx Descriptor Base Address High - RW */ -#define E1000_TDBAH(_n) (E1000_TDBAH_BASE + (_n << 8)) - E1000_TDLEN_BASE = 0x03808, /* Tx Descriptor Length - RW */ -#define E1000_TDLEN(_n) (E1000_TDLEN_BASE + (_n << 8)) - E1000_TDH_BASE = 0x03810, /* Tx Descriptor Head - RW */ -#define E1000_TDH(_n) (E1000_TDH_BASE + (_n << 8)) - E1000_TDT_BASE = 0x03818, /* Tx Descriptor Tail - RW */ -#define E1000_TDT(_n) (E1000_TDT_BASE + (_n << 8)) - E1000_TIDV = 0x03820, /* Tx Interrupt Delay Value - RW */ - E1000_TXDCTL_BASE = 0x03828, /* Tx Descriptor Control - RW */ -#define E1000_TXDCTL(_n) (E1000_TXDCTL_BASE + (_n << 8)) - E1000_TADV = 0x0382C, /* Tx Interrupt Absolute Delay Val - RW */ - E1000_TARC_BASE = 0x03840, /* Tx Arbitration Count (0) */ -#define E1000_TARC(_n) (E1000_TARC_BASE + (_n << 8)) - E1000_CRCERRS = 0x04000, /* CRC Error Count - R/clr */ - E1000_ALGNERRC = 0x04004, /* Alignment Error Count - R/clr */ - E1000_SYMERRS = 0x04008, /* Symbol Error Count - R/clr */ - E1000_RXERRC = 0x0400C, /* Receive Error Count - R/clr */ - E1000_MPC = 0x04010, /* Missed Packet Count - R/clr */ - E1000_SCC = 0x04014, /* Single Collision Count - R/clr */ - E1000_ECOL = 0x04018, /* Excessive Collision Count - R/clr */ - E1000_MCC = 0x0401C, /* Multiple Collision Count - R/clr */ - E1000_LATECOL = 0x04020, /* Late Collision Count - R/clr */ - E1000_COLC = 0x04028, /* Collision Count - R/clr */ - E1000_DC = 0x04030, /* Defer Count - R/clr */ - E1000_TNCRS = 0x04034, /* Tx-No CRS - R/clr */ - E1000_SEC = 0x04038, /* Sequence Error Count - R/clr */ - E1000_CEXTERR = 0x0403C, /* Carrier Extension Error Count - R/clr */ - E1000_RLEC = 0x04040, /* Receive Length Error Count - R/clr */ - E1000_XONRXC = 0x04048, /* XON Rx Count - R/clr */ - E1000_XONTXC = 0x0404C, /* XON Tx Count - R/clr */ - E1000_XOFFRXC = 0x04050, /* XOFF Rx Count - R/clr */ - E1000_XOFFTXC = 0x04054, /* XOFF Tx Count - R/clr */ - E1000_FCRUC = 0x04058, /* Flow Control Rx Unsupported Count- R/clr */ - E1000_PRC64 = 0x0405C, /* Packets Rx (64 bytes) - R/clr */ - E1000_PRC127 = 0x04060, /* Packets Rx (65-127 bytes) - R/clr */ - E1000_PRC255 = 0x04064, /* Packets Rx (128-255 bytes) - R/clr */ - E1000_PRC511 = 0x04068, /* Packets Rx (255-511 bytes) - R/clr */ - E1000_PRC1023 = 0x0406C, /* Packets Rx (512-1023 bytes) - R/clr */ - E1000_PRC1522 = 0x04070, /* Packets Rx (1024-1522 bytes) - R/clr */ - E1000_GPRC = 0x04074, /* Good Packets Rx Count - R/clr */ - E1000_BPRC = 0x04078, /* Broadcast Packets Rx Count - R/clr */ - E1000_MPRC = 0x0407C, /* Multicast Packets Rx Count - R/clr */ - E1000_GPTC = 0x04080, /* Good Packets Tx Count - R/clr */ - E1000_GORCL = 0x04088, /* Good Octets Rx Count Low - R/clr */ - E1000_GORCH = 0x0408C, /* Good Octets Rx Count High - R/clr */ - E1000_GOTCL = 0x04090, /* Good Octets Tx Count Low - R/clr */ - E1000_GOTCH = 0x04094, /* Good Octets Tx Count High - R/clr */ - E1000_RNBC = 0x040A0, /* Rx No Buffers Count - R/clr */ - E1000_RUC = 0x040A4, /* Rx Undersize Count - R/clr */ - E1000_RFC = 0x040A8, /* Rx Fragment Count - R/clr */ - E1000_ROC = 0x040AC, /* Rx Oversize Count - R/clr */ - E1000_RJC = 0x040B0, /* Rx Jabber Count - R/clr */ - E1000_MGTPRC = 0x040B4, /* Management Packets Rx Count - R/clr */ - E1000_MGTPDC = 0x040B8, /* Management Packets Dropped Count - R/clr */ - E1000_MGTPTC = 0x040BC, /* Management Packets Tx Count - R/clr */ - E1000_TORL = 0x040C0, /* Total Octets Rx Low - R/clr */ - E1000_TORH = 0x040C4, /* Total Octets Rx High - R/clr */ - E1000_TOTL = 0x040C8, /* Total Octets Tx Low - R/clr */ - E1000_TOTH = 0x040CC, /* Total Octets Tx High - R/clr */ - E1000_TPR = 0x040D0, /* Total Packets Rx - R/clr */ - E1000_TPT = 0x040D4, /* Total Packets Tx - R/clr */ - E1000_PTC64 = 0x040D8, /* Packets Tx (64 bytes) - R/clr */ - E1000_PTC127 = 0x040DC, /* Packets Tx (65-127 bytes) - R/clr */ - E1000_PTC255 = 0x040E0, /* Packets Tx (128-255 bytes) - R/clr */ - E1000_PTC511 = 0x040E4, /* Packets Tx (256-511 bytes) - R/clr */ - E1000_PTC1023 = 0x040E8, /* Packets Tx (512-1023 bytes) - R/clr */ - E1000_PTC1522 = 0x040EC, /* Packets Tx (1024-1522 Bytes) - R/clr */ - E1000_MPTC = 0x040F0, /* Multicast Packets Tx Count - R/clr */ - E1000_BPTC = 0x040F4, /* Broadcast Packets Tx Count - R/clr */ - E1000_TSCTC = 0x040F8, /* TCP Segmentation Context Tx - R/clr */ - E1000_TSCTFC = 0x040FC, /* TCP Segmentation Context Tx Fail - R/clr */ - E1000_IAC = 0x04100, /* Interrupt Assertion Count */ - E1000_ICRXPTC = 0x04104, /* Irq Cause Rx Packet Timer Expire Count */ - E1000_ICRXATC = 0x04108, /* Irq Cause Rx Abs Timer Expire Count */ - E1000_ICTXPTC = 0x0410C, /* Irq Cause Tx Packet Timer Expire Count */ - E1000_ICTXATC = 0x04110, /* Irq Cause Tx Abs Timer Expire Count */ - E1000_ICTXQEC = 0x04118, /* Irq Cause Tx Queue Empty Count */ - E1000_ICTXQMTC = 0x0411C, /* Irq Cause Tx Queue MinThreshold Count */ - E1000_ICRXDMTC = 0x04120, /* Irq Cause Rx Desc MinThreshold Count */ - E1000_ICRXOC = 0x04124, /* Irq Cause Receiver Overrun Count */ - E1000_RXCSUM = 0x05000, /* Rx Checksum Control - RW */ - E1000_RFCTL = 0x05008, /* Receive Filter Control */ - E1000_MTA = 0x05200, /* Multicast Table Array - RW Array */ - E1000_RAL_BASE = 0x05400, /* Receive Address Low - RW */ -#define E1000_RAL(_n) (E1000_RAL_BASE + ((_n) * 8)) -#define E1000_RA (E1000_RAL(0)) - E1000_RAH_BASE = 0x05404, /* Receive Address High - RW */ -#define E1000_RAH(_n) (E1000_RAH_BASE + ((_n) * 8)) - E1000_SHRAL_PCH_LPT_BASE = 0x05408, -#define E1000_SHRAL_PCH_LPT(_n) (E1000_SHRAL_PCH_LPT_BASE + ((_n) * 8)) - E1000_SHRAH_PCH_LTP_BASE = 0x0540C, -#define E1000_SHRAH_PCH_LPT(_n) (E1000_SHRAH_PCH_LTP_BASE + ((_n) * 8)) - E1000_SHRAL_BASE = 0x05438, /* Shared Receive Address Low - RW */ -#define E1000_SHRAL(_n) (E1000_SHRAL_BASE + ((_n) * 8)) - E1000_SHRAH_BASE = 0x0543C, /* Shared Receive Address High - RW */ -#define E1000_SHRAH(_n) (E1000_SHRAH_BASE + ((_n) * 8)) - E1000_VFTA = 0x05600, /* VLAN Filter Table Array - RW Array */ - E1000_WUC = 0x05800, /* Wakeup Control - RW */ - E1000_WUFC = 0x05808, /* Wakeup Filter Control - RW */ - E1000_WUS = 0x05810, /* Wakeup Status - RO */ - E1000_MRQC = 0x05818, /* Multiple Receive Control - RW */ - E1000_MANC = 0x05820, /* Management Control - RW */ - E1000_FFLT = 0x05F00, /* Flexible Filter Length Table - RW Array */ - E1000_HOST_IF = 0x08800, /* Host Interface */ - - E1000_KMRNCTRLSTA = 0x00034, /* MAC-PHY interface - RW */ - E1000_MANC2H = 0x05860, /* Management Control To Host - RW */ - E1000_MDEF_BASE = 0x05890, /* Management Decision Filters */ -#define E1000_MDEF(_n) (E1000_MDEF_BASE + ((_n) * 4)) - E1000_SW_FW_SYNC = 0x05B5C, /* Software-Firmware Synchronization - RW */ - E1000_GCR = 0x05B00, /* PCI-Ex Control */ - E1000_GCR2 = 0x05B64, /* PCI-Ex Control #2 */ - E1000_FACTPS = 0x05B30, /* Function Active and Power State to MNG */ - E1000_SWSM = 0x05B50, /* SW Semaphore */ - E1000_FWSM = 0x05B54, /* FW Semaphore */ - E1000_SWSM2 = 0x05B58, /* Driver-only SW semaphore */ - E1000_RETA_BASE = 0x05C00, /* Redirection Table - RW */ -#define E1000_RETA(_n) (E1000_RETA_BASE + ((_n) * 4)) - E1000_RSSRK_BASE = 0x05C80, /* RSS Random Key - RW */ -#define E1000_RSSRK(_n) (E1000_RSSRK_BASE + ((_n) * 4)) - E1000_FFLT_DBG = 0x05F04, /* Debug Register */ - E1000_PCH_RAICC_BASE = 0x05F50, /* Receive Address Initial CRC */ -#define E1000_PCH_RAICC(_n) (E1000_PCH_RAICC_BASE + ((_n) * 4)) -#define E1000_CRC_OFFSET E1000_PCH_RAICC_BASE - E1000_HICR = 0x08F00, /* Host Interface Control */ -}; - -#define E1000_MAX_PHY_ADDR 4 - -/* IGP01E1000 Specific Registers */ -#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* Port Config */ -#define IGP01E1000_PHY_PORT_STATUS 0x11 /* Status */ -#define IGP01E1000_PHY_PORT_CTRL 0x12 /* Control */ -#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health */ -#define IGP02E1000_PHY_POWER_MGMT 0x19 /* Power Management */ -#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* Page Select */ -#define BM_PHY_PAGE_SELECT 22 /* Page Select for BM */ -#define IGP_PAGE_SHIFT 5 -#define PHY_REG_MASK 0x1F - -#define BM_WUC_PAGE 800 -#define BM_WUC_ADDRESS_OPCODE 0x11 -#define BM_WUC_DATA_OPCODE 0x12 -#define BM_WUC_ENABLE_PAGE 769 -#define BM_WUC_ENABLE_REG 17 -#define BM_WUC_ENABLE_BIT (1 << 2) -#define BM_WUC_HOST_WU_BIT (1 << 4) -#define BM_WUC_ME_WU_BIT (1 << 5) - -#define BM_WUC PHY_REG(BM_WUC_PAGE, 1) -#define BM_WUFC PHY_REG(BM_WUC_PAGE, 2) -#define BM_WUS PHY_REG(BM_WUC_PAGE, 3) - -#define IGP01E1000_PHY_PCS_INIT_REG 0x00B4 -#define IGP01E1000_PHY_POLARITY_MASK 0x0078 - -#define IGP01E1000_PSCR_AUTO_MDIX 0x1000 -#define IGP01E1000_PSCR_FORCE_MDI_MDIX 0x2000 /* 0=MDI, 1=MDIX */ - -#define IGP01E1000_PSCFR_SMART_SPEED 0x0080 - -#define IGP02E1000_PM_SPD 0x0001 /* Smart Power Down */ -#define IGP02E1000_PM_D0_LPLU 0x0002 /* For D0a states */ -#define IGP02E1000_PM_D3_LPLU 0x0004 /* For all other states */ - -#define IGP01E1000_PLHR_SS_DOWNGRADE 0x8000 - -#define IGP01E1000_PSSR_POLARITY_REVERSED 0x0002 -#define IGP01E1000_PSSR_MDIX 0x0800 -#define IGP01E1000_PSSR_SPEED_MASK 0xC000 -#define IGP01E1000_PSSR_SPEED_1000MBPS 0xC000 - -#define IGP02E1000_PHY_CHANNEL_NUM 4 -#define IGP02E1000_PHY_AGC_A 0x11B1 -#define IGP02E1000_PHY_AGC_B 0x12B1 -#define IGP02E1000_PHY_AGC_C 0x14B1 -#define IGP02E1000_PHY_AGC_D 0x18B1 - -#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Course - 15:13, Fine - 12:9 */ -#define IGP02E1000_AGC_LENGTH_MASK 0x7F -#define IGP02E1000_AGC_RANGE 15 - -/* manage.c */ -#define E1000_VFTA_ENTRY_SHIFT 5 -#define E1000_VFTA_ENTRY_MASK 0x7F -#define E1000_VFTA_ENTRY_BIT_SHIFT_MASK 0x1F - -#define E1000_HICR_EN 0x01 /* Enable bit - RO */ -/* Driver sets this bit when done to put command in RAM */ -#define E1000_HICR_C 0x02 -#define E1000_HICR_FW_RESET_ENABLE 0x40 -#define E1000_HICR_FW_RESET 0x80 - -#define E1000_FWSM_MODE_MASK 0xE -#define E1000_FWSM_MODE_SHIFT 1 - -#define E1000_MNG_IAMT_MODE 0x3 -#define E1000_MNG_DHCP_COOKIE_LENGTH 0x10 -#define E1000_MNG_DHCP_COOKIE_OFFSET 0x6F0 -#define E1000_MNG_DHCP_COMMAND_TIMEOUT 10 -#define E1000_MNG_DHCP_TX_PAYLOAD_CMD 64 -#define E1000_MNG_DHCP_COOKIE_STATUS_PARSING 0x1 -#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN 0x2 - -/* nvm.c */ -#define E1000_STM_OPCODE 0xDB00 - -#define E1000_KMRNCTRLSTA_OFFSET 0x001F0000 -#define E1000_KMRNCTRLSTA_OFFSET_SHIFT 16 -#define E1000_KMRNCTRLSTA_REN 0x00200000 -#define E1000_KMRNCTRLSTA_CTRL_OFFSET 0x1 /* Kumeran Control */ -#define E1000_KMRNCTRLSTA_DIAG_OFFSET 0x3 /* Kumeran Diagnostic */ -#define E1000_KMRNCTRLSTA_TIMEOUTS 0x4 /* Kumeran Timeouts */ -#define E1000_KMRNCTRLSTA_INBAND_PARAM 0x9 /* Kumeran InBand Parameters */ -#define E1000_KMRNCTRLSTA_IBIST_DISABLE 0x0200 /* Kumeran IBIST Disable */ -#define E1000_KMRNCTRLSTA_DIAG_NELPBK 0x1000 /* Nearend Loopback mode */ -#define E1000_KMRNCTRLSTA_K1_CONFIG 0x7 -#define E1000_KMRNCTRLSTA_K1_ENABLE 0x0002 -#define E1000_KMRNCTRLSTA_HD_CTRL 0x10 /* Kumeran HD Control */ - -#define IFE_PHY_EXTENDED_STATUS_CONTROL 0x10 -#define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY Special Control */ -#define IFE_PHY_SPECIAL_CONTROL_LED 0x1B /* PHY Special and LED Control */ -#define IFE_PHY_MDIX_CONTROL 0x1C /* MDI/MDI-X Control */ - -/* IFE PHY Extended Status Control */ -#define IFE_PESC_POLARITY_REVERSED 0x0100 - -/* IFE PHY Special Control */ -#define IFE_PSC_AUTO_POLARITY_DISABLE 0x0010 -#define IFE_PSC_FORCE_POLARITY 0x0020 - -/* IFE PHY Special Control and LED Control */ -#define IFE_PSCL_PROBE_MODE 0x0020 -#define IFE_PSCL_PROBE_LEDS_OFF 0x0006 /* Force LEDs 0 and 2 off */ -#define IFE_PSCL_PROBE_LEDS_ON 0x0007 /* Force LEDs 0 and 2 on */ - -/* IFE PHY MDIX Control */ -#define IFE_PMC_MDIX_STATUS 0x0020 /* 1=MDI-X, 0=MDI */ -#define IFE_PMC_FORCE_MDIX 0x0040 /* 1=force MDI-X, 0=force MDI */ -#define IFE_PMC_AUTO_MDIX 0x0080 /* 1=enable auto MDI/MDI-X, 0=disable */ - -#define E1000_CABLE_LENGTH_UNDEFINED 0xFF +struct e1000_hw; #define E1000_DEV_ID_82571EB_COPPER 0x105E #define E1000_DEV_ID_82571EB_FIBER 0x105F @@ -373,13 +52,11 @@ enum e1e_registers { #define E1000_DEV_ID_82573L 0x109A #define E1000_DEV_ID_82574L 0x10D3 #define E1000_DEV_ID_82574LA 0x10F6 -#define E1000_DEV_ID_82583V 0x150C - +#define E1000_DEV_ID_82583V 0x150C #define E1000_DEV_ID_80003ES2LAN_COPPER_DPT 0x1096 #define E1000_DEV_ID_80003ES2LAN_SERDES_DPT 0x1098 #define E1000_DEV_ID_80003ES2LAN_COPPER_SPT 0x10BA #define E1000_DEV_ID_80003ES2LAN_SERDES_SPT 0x10BB - #define E1000_DEV_ID_ICH8_82567V_3 0x1501 #define E1000_DEV_ID_ICH8_IGP_M_AMT 0x1049 #define E1000_DEV_ID_ICH8_IGP_AMT 0x104A @@ -414,12 +91,12 @@ enum e1e_registers { #define E1000_DEV_ID_PCH_LPTLP_I218_LM 0x155A #define E1000_DEV_ID_PCH_LPTLP_I218_V 0x1559 -#define E1000_REVISION_4 4 +#define E1000_REVISION_4 4 -#define E1000_FUNC_1 1 +#define E1000_FUNC_1 1 -#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN0 0 -#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN1 3 +#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN0 0 +#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN1 3 enum e1000_mac_type { e1000_82571, @@ -524,16 +201,6 @@ enum e1000_serdes_link_state { e1000_serdes_link_forced_up }; -/* Receive Descriptor */ -struct e1000_rx_desc { - __le64 buffer_addr; /* Address of the descriptor's data buffer */ - __le16 length; /* Length of data DMAed into data buffer */ - __le16 csum; /* Packet checksum */ - u8 status; /* Descriptor status */ - u8 errors; /* Descriptor Errors */ - __le16 special; -}; - /* Receive Descriptor - Extended */ union e1000_rx_desc_extended { struct { @@ -656,7 +323,7 @@ struct e1000_data_desc { struct { u8 status; /* Descriptor status */ u8 popts; /* Packet Options */ - __le16 special; /* */ + __le16 special; } fields; } upper; }; @@ -752,7 +419,7 @@ struct e1000_host_command_header { u8 checksum; }; -#define E1000_HI_MAX_DATA_LENGTH 252 +#define E1000_HI_MAX_DATA_LENGTH 252 struct e1000_host_command_info { struct e1000_host_command_header command_header; u8 command_data[E1000_HI_MAX_DATA_LENGTH]; @@ -767,13 +434,18 @@ struct e1000_host_mng_command_header { u16 command_length; }; -#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8 +#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8 struct e1000_host_mng_command_info { struct e1000_host_mng_command_header command_header; u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH]; }; -/* Function pointers and static data for the MAC. */ +#include "mac.h" +#include "phy.h" +#include "nvm.h" +#include "manage.h" + +/* Function pointers for the MAC. */ struct e1000_mac_operations { s32 (*id_led_init)(struct e1000_hw *); s32 (*blink_led)(struct e1000_hw *); @@ -1002,4 +674,8 @@ struct e1000_hw { } dev_spec; }; +#include "82571.h" +#include "80003es2lan.h" +#include "ich8lan.h" + #endif diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 97633654760..dff7bff8b8e 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -57,147 +57,6 @@ #include "e1000.h" -#define ICH_FLASH_GFPREG 0x0000 -#define ICH_FLASH_HSFSTS 0x0004 -#define ICH_FLASH_HSFCTL 0x0006 -#define ICH_FLASH_FADDR 0x0008 -#define ICH_FLASH_FDATA0 0x0010 -#define ICH_FLASH_PR0 0x0074 - -#define ICH_FLASH_READ_COMMAND_TIMEOUT 500 -#define ICH_FLASH_WRITE_COMMAND_TIMEOUT 500 -#define ICH_FLASH_ERASE_COMMAND_TIMEOUT 3000000 -#define ICH_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF -#define ICH_FLASH_CYCLE_REPEAT_COUNT 10 - -#define ICH_CYCLE_READ 0 -#define ICH_CYCLE_WRITE 2 -#define ICH_CYCLE_ERASE 3 - -#define FLASH_GFPREG_BASE_MASK 0x1FFF -#define FLASH_SECTOR_ADDR_SHIFT 12 - -#define ICH_FLASH_SEG_SIZE_256 256 -#define ICH_FLASH_SEG_SIZE_4K 4096 -#define ICH_FLASH_SEG_SIZE_8K 8192 -#define ICH_FLASH_SEG_SIZE_64K 65536 - - -#define E1000_ICH_FWSM_RSPCIPHY 0x00000040 /* Reset PHY on PCI Reset */ -/* FW established a valid mode */ -#define E1000_ICH_FWSM_FW_VALID 0x00008000 - -#define E1000_ICH_MNG_IAMT_MODE 0x2 - -#define ID_LED_DEFAULT_ICH8LAN ((ID_LED_DEF1_DEF2 << 12) | \ - (ID_LED_DEF1_OFF2 << 8) | \ - (ID_LED_DEF1_ON2 << 4) | \ - (ID_LED_DEF1_DEF2)) - -#define E1000_ICH_NVM_SIG_WORD 0x13 -#define E1000_ICH_NVM_SIG_MASK 0xC000 -#define E1000_ICH_NVM_VALID_SIG_MASK 0xC0 -#define E1000_ICH_NVM_SIG_VALUE 0x80 - -#define E1000_ICH8_LAN_INIT_TIMEOUT 1500 - -#define E1000_FEXTNVM_SW_CONFIG 1 -#define E1000_FEXTNVM_SW_CONFIG_ICH8M (1 << 27) /* Bit redefined for ICH8M :/ */ - -#define E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK 0x0C000000 -#define E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC 0x08000000 - -#define E1000_FEXTNVM4_BEACON_DURATION_MASK 0x7 -#define E1000_FEXTNVM4_BEACON_DURATION_8USEC 0x7 -#define E1000_FEXTNVM4_BEACON_DURATION_16USEC 0x3 - -#define PCIE_ICH8_SNOOP_ALL PCIE_NO_SNOOP_ALL - -#define E1000_ICH_RAR_ENTRIES 7 -#define E1000_PCH2_RAR_ENTRIES 5 /* RAR[0], SHRA[0-3] */ -#define E1000_PCH_LPT_RAR_ENTRIES 12 /* RAR[0], SHRA[0-10] */ - -#define PHY_PAGE_SHIFT 5 -#define PHY_REG(page, reg) (((page) << PHY_PAGE_SHIFT) | \ - ((reg) & MAX_PHY_REG_ADDRESS)) -#define IGP3_KMRN_DIAG PHY_REG(770, 19) /* KMRN Diagnostic */ -#define IGP3_VR_CTRL PHY_REG(776, 18) /* Voltage Regulator Control */ - -#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS 0x0002 -#define IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK 0x0300 -#define IGP3_VR_CTRL_MODE_SHUTDOWN 0x0200 - -#define HV_LED_CONFIG PHY_REG(768, 30) /* LED Configuration */ - -#define SW_FLAG_TIMEOUT 1000 /* SW Semaphore flag timeout in milliseconds */ - -/* SMBus Control Phy Register */ -#define CV_SMB_CTRL PHY_REG(769, 23) -#define CV_SMB_CTRL_FORCE_SMBUS 0x0001 - -/* SMBus Address Phy Register */ -#define HV_SMB_ADDR PHY_REG(768, 26) -#define HV_SMB_ADDR_MASK 0x007F -#define HV_SMB_ADDR_PEC_EN 0x0200 -#define HV_SMB_ADDR_VALID 0x0080 -#define HV_SMB_ADDR_FREQ_MASK 0x1100 -#define HV_SMB_ADDR_FREQ_LOW_SHIFT 8 -#define HV_SMB_ADDR_FREQ_HIGH_SHIFT 12 - -/* PHY Power Management Control */ -#define HV_PM_CTRL PHY_REG(770, 17) -#define HV_PM_CTRL_PLL_STOP_IN_K1_GIGA 0x100 - -/* PHY Low Power Idle Control */ -#define I82579_LPI_CTRL PHY_REG(772, 20) -#define I82579_LPI_CTRL_ENABLE_MASK 0x6000 -#define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT 0x80 - -/* EMI Registers */ -#define I82579_EMI_ADDR 0x10 -#define I82579_EMI_DATA 0x11 -#define I82579_LPI_UPDATE_TIMER 0x4805 /* in 40ns units + 40 ns base value */ -#define I82579_MSE_THRESHOLD 0x084F /* Mean Square Error Threshold */ -#define I82579_MSE_LINK_DOWN 0x2411 /* MSE count before dropping link */ -#define I217_EEE_ADVERTISEMENT 0x8001 /* IEEE MMD Register 7.60 */ -#define I217_EEE_LP_ABILITY 0x8002 /* IEEE MMD Register 7.61 */ -#define I217_EEE_100_SUPPORTED (1 << 1) /* 100BaseTx EEE supported */ - -/* Intel Rapid Start Technology Support */ -#define I217_PROXY_CTRL BM_PHY_REG(BM_WUC_PAGE, 70) -#define I217_PROXY_CTRL_AUTO_DISABLE 0x0080 -#define I217_SxCTRL PHY_REG(BM_PORT_CTRL_PAGE, 28) -#define I217_SxCTRL_ENABLE_LPI_RESET 0x1000 -#define I217_CGFREG PHY_REG(772, 29) -#define I217_CGFREG_ENABLE_MTA_RESET 0x0002 -#define I217_MEMPWR PHY_REG(772, 26) -#define I217_MEMPWR_DISABLE_SMB_RELEASE 0x0010 - -/* Strapping Option Register - RO */ -#define E1000_STRAP 0x0000C -#define E1000_STRAP_SMBUS_ADDRESS_MASK 0x00FE0000 -#define E1000_STRAP_SMBUS_ADDRESS_SHIFT 17 -#define E1000_STRAP_SMT_FREQ_MASK 0x00003000 -#define E1000_STRAP_SMT_FREQ_SHIFT 12 - -/* OEM Bits Phy Register */ -#define HV_OEM_BITS PHY_REG(768, 25) -#define HV_OEM_BITS_LPLU 0x0004 /* Low Power Link Up */ -#define HV_OEM_BITS_GBE_DIS 0x0040 /* Gigabit Disable */ -#define HV_OEM_BITS_RESTART_AN 0x0400 /* Restart Auto-negotiation */ - -#define E1000_NVM_K1_CONFIG 0x1B /* NVM K1 Config Word */ -#define E1000_NVM_K1_ENABLE 0x1 /* NVM Enable K1 bit */ - -/* KMRN Mode Control */ -#define HV_KMRN_MODE_CTRL PHY_REG(769, 16) -#define HV_KMRN_MDIO_SLOW 0x0400 - -/* KMRN FIFO Control and Status */ -#define HV_KMRN_FIFO_CTRLSTA PHY_REG(770, 16) -#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK 0x7000 -#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT 12 - /* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */ /* Offset 04h HSFSTS */ union ich8_hws_flash_status { @@ -252,7 +111,6 @@ union ich8_flash_protected_range { u32 regval; }; -static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw); static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw); static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw); static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank); @@ -264,9 +122,7 @@ static s32 e1000_read_flash_word_ich8lan(struct e1000_hw *hw, u32 offset, u16 *data); static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, u8 size, u16 *data); -static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw); static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw); -static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw); static s32 e1000_cleanup_led_ich8lan(struct e1000_hw *hw); static s32 e1000_led_on_ich8lan(struct e1000_hw *hw); static s32 e1000_led_off_ich8lan(struct e1000_hw *hw); @@ -278,7 +134,7 @@ static s32 e1000_led_off_pchlan(struct e1000_hw *hw); static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active); static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw); static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw); -static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link); +static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link); static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw); static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw); static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw); @@ -330,12 +186,12 @@ static bool e1000_phy_is_accessible_pchlan(struct e1000_hw *hw) u16 retry_count; for (retry_count = 0; retry_count < 2; retry_count++) { - ret_val = e1e_rphy_locked(hw, PHY_ID1, &phy_reg); + ret_val = e1e_rphy_locked(hw, MII_PHYSID1, &phy_reg); if (ret_val || (phy_reg == 0xFFFF)) continue; phy_id = (u32)(phy_reg << 16); - ret_val = e1e_rphy_locked(hw, PHY_ID2, &phy_reg); + ret_val = e1e_rphy_locked(hw, MII_PHYSID2, &phy_reg); if (ret_val || (phy_reg == 0xFFFF)) { phy_id = 0; continue; @@ -378,10 +234,15 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) s32 ret_val; u16 phy_reg; + /* Gate automatic PHY configuration by hardware on managed and + * non-managed 82579 and newer adapters. + */ + e1000_gate_hw_phy_config_ich8lan(hw, true); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) { e_dbg("Failed to initialize PHY flow\n"); - return ret_val; + goto out; } /* The MAC-PHY interconnect may be in SMBus mode. If the PHY is @@ -402,13 +263,6 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) /* fall-through */ case e1000_pch2lan: - /* Gate automatic PHY configuration by hardware on - * non-managed 82579 - */ - if ((hw->mac.type == e1000_pch2lan) && - !(fwsm & E1000_ICH_FWSM_FW_VALID)) - e1000_gate_hw_phy_config_ich8lan(hw, true); - if (e1000_phy_is_accessible_pchlan(hw)) { if (hw->mac.type == e1000_pch_lpt) { /* Unforce SMBus mode in PHY */ @@ -443,6 +297,15 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) mac_reg |= E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC; ew32(FEXTNVM3, mac_reg); + if (hw->mac.type == e1000_pch_lpt) { + /* Toggling LANPHYPC brings the PHY out of SMBus mode + * So ensure that the MAC is also out of SMBus mode + */ + mac_reg = er32(CTRL_EXT); + mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS; + ew32(CTRL_EXT, mac_reg); + } + /* Toggle LANPHYPC Value bit */ mac_reg = er32(CTRL); mac_reg |= E1000_CTRL_LANPHYPC_OVERRIDE; @@ -476,6 +339,7 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) */ ret_val = e1000e_phy_hw_reset_generic(hw); +out: /* Ungate automatic PHY configuration on non-managed 82579 */ if ((hw->mac.type == e1000_pch2lan) && !(fwsm & E1000_ICH_FWSM_FW_VALID)) { @@ -495,7 +359,7 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) { struct e1000_phy_info *phy = &hw->phy; - s32 ret_val = 0; + s32 ret_val; phy->addr = 1; phy->reset_delay_us = 100; @@ -778,68 +642,143 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw) if (mac->type == e1000_ich8lan) e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, true); - /* Gate automatic PHY configuration by hardware on managed - * 82579 and i217 - */ - if ((mac->type == e1000_pch2lan || mac->type == e1000_pch_lpt) && - (er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) - e1000_gate_hw_phy_config_ich8lan(hw, true); - return 0; } /** + * __e1000_access_emi_reg_locked - Read/write EMI register + * @hw: pointer to the HW structure + * @addr: EMI address to program + * @data: pointer to value to read/write from/to the EMI address + * @read: boolean flag to indicate read or write + * + * This helper function assumes the SW/FW/HW Semaphore is already acquired. + **/ +static s32 __e1000_access_emi_reg_locked(struct e1000_hw *hw, u16 address, + u16 *data, bool read) +{ + s32 ret_val; + + ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR, address); + if (ret_val) + return ret_val; + + if (read) + ret_val = e1e_rphy_locked(hw, I82579_EMI_DATA, data); + else + ret_val = e1e_wphy_locked(hw, I82579_EMI_DATA, *data); + + return ret_val; +} + +/** + * e1000_read_emi_reg_locked - Read Extended Management Interface register + * @hw: pointer to the HW structure + * @addr: EMI address to program + * @data: value to be read from the EMI address + * + * Assumes the SW/FW/HW Semaphore is already acquired. + **/ +s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data) +{ + return __e1000_access_emi_reg_locked(hw, addr, data, true); +} + +/** + * e1000_write_emi_reg_locked - Write Extended Management Interface register + * @hw: pointer to the HW structure + * @addr: EMI address to program + * @data: value to be written to the EMI address + * + * Assumes the SW/FW/HW Semaphore is already acquired. + **/ +static s32 e1000_write_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 data) +{ + return __e1000_access_emi_reg_locked(hw, addr, &data, false); +} + +/** * e1000_set_eee_pchlan - Enable/disable EEE support * @hw: pointer to the HW structure * - * Enable/disable EEE based on setting in dev_spec structure. The bits in - * the LPI Control register will remain set only if/when link is up. + * Enable/disable EEE based on setting in dev_spec structure, the duplex of + * the link and the EEE capabilities of the link partner. The LPI Control + * register bits will remain set only if/when link is up. **/ static s32 e1000_set_eee_pchlan(struct e1000_hw *hw) { struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; - s32 ret_val = 0; - u16 phy_reg; + s32 ret_val; + u16 lpi_ctrl; if ((hw->phy.type != e1000_phy_82579) && (hw->phy.type != e1000_phy_i217)) return 0; - ret_val = e1e_rphy(hw, I82579_LPI_CTRL, &phy_reg); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; - if (dev_spec->eee_disable) - phy_reg &= ~I82579_LPI_CTRL_ENABLE_MASK; - else - phy_reg |= I82579_LPI_CTRL_ENABLE_MASK; - - ret_val = e1e_wphy(hw, I82579_LPI_CTRL, phy_reg); + ret_val = e1e_rphy_locked(hw, I82579_LPI_CTRL, &lpi_ctrl); if (ret_val) - return ret_val; + goto release; + + /* Clear bits that enable EEE in various speeds */ + lpi_ctrl &= ~I82579_LPI_CTRL_ENABLE_MASK; + + /* Enable EEE if not disabled by user */ + if (!dev_spec->eee_disable) { + u16 lpa, pcs_status, data; - if ((hw->phy.type == e1000_phy_i217) && !dev_spec->eee_disable) { /* Save off link partner's EEE ability */ - ret_val = hw->phy.ops.acquire(hw); - if (ret_val) - return ret_val; - ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR, - I217_EEE_LP_ABILITY); + switch (hw->phy.type) { + case e1000_phy_82579: + lpa = I82579_EEE_LP_ABILITY; + pcs_status = I82579_EEE_PCS_STATUS; + break; + case e1000_phy_i217: + lpa = I217_EEE_LP_ABILITY; + pcs_status = I217_EEE_PCS_STATUS; + break; + default: + ret_val = -E1000_ERR_PHY; + goto release; + } + ret_val = e1000_read_emi_reg_locked(hw, lpa, + &dev_spec->eee_lp_ability); if (ret_val) goto release; - e1e_rphy_locked(hw, I82579_EMI_DATA, &dev_spec->eee_lp_ability); - /* EEE is not supported in 100Half, so ignore partner's EEE - * in 100 ability if full-duplex is not advertised. + /* Enable EEE only for speeds in which the link partner is + * EEE capable. */ - e1e_rphy_locked(hw, PHY_LP_ABILITY, &phy_reg); - if (!(phy_reg & NWAY_LPAR_100TX_FD_CAPS)) - dev_spec->eee_lp_ability &= ~I217_EEE_100_SUPPORTED; -release: - hw->phy.ops.release(hw); + if (dev_spec->eee_lp_ability & I82579_EEE_1000_SUPPORTED) + lpi_ctrl |= I82579_LPI_CTRL_1000_ENABLE; + + if (dev_spec->eee_lp_ability & I82579_EEE_100_SUPPORTED) { + e1e_rphy_locked(hw, MII_LPA, &data); + if (data & LPA_100FULL) + lpi_ctrl |= I82579_LPI_CTRL_100_ENABLE; + else + /* EEE is not supported in 100Half, so ignore + * partner's EEE in 100 ability if full-duplex + * is not advertised. + */ + dev_spec->eee_lp_ability &= + ~I82579_EEE_100_SUPPORTED; + } + + /* R/Clr IEEE MMD 3.1 bits 11:10 - Tx/Rx LPI Received */ + ret_val = e1000_read_emi_reg_locked(hw, pcs_status, &data); + if (ret_val) + goto release; } - return 0; + ret_val = e1e_wphy_locked(hw, I82579_LPI_CTRL, lpi_ctrl); +release: + hw->phy.ops.release(hw); + + return ret_val; } /** @@ -1017,7 +956,7 @@ static DEFINE_MUTEX(nvm_mutex); * * Acquires the mutex for performing NVM operations. **/ -static s32 e1000_acquire_nvm_ich8lan(struct e1000_hw *hw) +static s32 e1000_acquire_nvm_ich8lan(struct e1000_hw __always_unused *hw) { mutex_lock(&nvm_mutex); @@ -1030,7 +969,7 @@ static s32 e1000_acquire_nvm_ich8lan(struct e1000_hw *hw) * * Releases the mutex used while performing NVM operations. **/ -static void e1000_release_nvm_ich8lan(struct e1000_hw *hw) +static void e1000_release_nvm_ich8lan(struct e1000_hw __always_unused *hw) { mutex_unlock(&nvm_mutex); } @@ -1322,7 +1261,7 @@ static s32 e1000_write_smbus_addr(struct e1000_hw *hw) u32 strap = er32(STRAP); u32 freq = (strap & E1000_STRAP_SMT_FREQ_MASK) >> E1000_STRAP_SMT_FREQ_SHIFT; - s32 ret_val = 0; + s32 ret_val; strap &= E1000_STRAP_SMBUS_ADDRESS_MASK; @@ -1558,7 +1497,7 @@ release: **/ s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable) { - s32 ret_val = 0; + s32 ret_val; u32 ctrl_reg = 0; u32 ctrl_ext = 0; u32 reg = 0; @@ -1727,7 +1666,7 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw) */ if (hw->phy.revision < 2) { e1000e_phy_sw_reset(hw); - ret_val = e1e_wphy(hw, PHY_CONTROL, 0x3140); + ret_val = e1e_wphy(hw, MII_BMCR, 0x3140); } } @@ -1757,6 +1696,11 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw) if (ret_val) goto release; ret_val = e1e_wphy_locked(hw, BM_PORT_GEN_CFG, phy_data & 0x00FF); + if (ret_val) + goto release; + + /* set MSE higher to enable link to stay up when noise is high */ + ret_val = e1000_write_emi_reg_locked(hw, I82577_MSE_THRESHOLD, 0x0034); release: hw->phy.ops.release(hw); @@ -1983,22 +1927,18 @@ static s32 e1000_lv_phy_workarounds_ich8lan(struct e1000_hw *hw) /* Set MDIO slow mode before any other MDIO access */ ret_val = e1000_set_mdio_slow_mode_hv(hw); + if (ret_val) + return ret_val; ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; - ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR, I82579_MSE_THRESHOLD); - if (ret_val) - goto release; /* set MSE higher to enable link to stay up when noise is high */ - ret_val = e1e_wphy_locked(hw, I82579_EMI_DATA, 0x0034); - if (ret_val) - goto release; - ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR, I82579_MSE_LINK_DOWN); + ret_val = e1000_write_emi_reg_locked(hw, I82579_MSE_THRESHOLD, 0x0034); if (ret_val) goto release; /* drop link after 5 times MSE threshold was reached */ - ret_val = e1e_wphy_locked(hw, I82579_EMI_DATA, 0x0005); + ret_val = e1000_write_emi_reg_locked(hw, I82579_MSE_LINK_DOWN, 0x0005); release: hw->phy.ops.release(hw); @@ -2172,10 +2112,9 @@ static s32 e1000_post_phy_reset_ich8lan(struct e1000_hw *hw) ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; - ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR, - I82579_LPI_UPDATE_TIMER); - if (!ret_val) - ret_val = e1e_wphy_locked(hw, I82579_EMI_DATA, 0x1387); + ret_val = e1000_write_emi_reg_locked(hw, + I82579_LPI_UPDATE_TIMER, + 0x1387); hw->phy.ops.release(hw); } @@ -2219,7 +2158,7 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw) **/ static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active) { - s32 ret_val = 0; + s32 ret_val; u16 oem_reg; ret_val = e1e_rphy(hw, HV_OEM_BITS, &oem_reg); @@ -2277,6 +2216,8 @@ static s32 e1000_set_d0_lplu_state_ich8lan(struct e1000_hw *hw, bool active) /* When LPLU is enabled, we should disable SmartSpeed */ ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, &data); + if (ret_val) + return ret_val; data &= ~IGP01E1000_PSCFR_SMART_SPEED; ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data); if (ret_val) @@ -2949,19 +2890,32 @@ static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw) { s32 ret_val; u16 data; + u16 word; + u16 valid_csum_mask; - /* Read 0x19 and check bit 6. If this bit is 0, the checksum - * needs to be fixed. This bit is an indication that the NVM - * was prepared by OEM software and did not calculate the - * checksum...a likely scenario. + /* Read NVM and check Invalid Image CSUM bit. If this bit is 0, + * the checksum needs to be fixed. This bit is an indication that + * the NVM was prepared by OEM software and did not calculate + * the checksum...a likely scenario. */ - ret_val = e1000_read_nvm(hw, 0x19, 1, &data); + switch (hw->mac.type) { + case e1000_pch_lpt: + word = NVM_COMPAT; + valid_csum_mask = NVM_COMPAT_VALID_CSUM; + break; + default: + word = NVM_FUTURE_INIT_WORD1; + valid_csum_mask = NVM_FUTURE_INIT_WORD1_VALID_CSUM; + break; + } + + ret_val = e1000_read_nvm(hw, word, 1, &data); if (ret_val) return ret_val; - if (!(data & 0x40)) { - data |= 0x40; - ret_val = e1000_write_nvm(hw, 0x19, 1, &data); + if (!(data & valid_csum_mask)) { + data |= valid_csum_mask; + ret_val = e1000_write_nvm(hw, word, 1, &data); if (ret_val) return ret_val; ret_val = e1000e_update_nvm_checksum(hw); @@ -3624,6 +3578,17 @@ static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw) if (hw->mac.type == e1000_ich8lan) reg |= (E1000_RFCTL_IPV6_EX_DIS | E1000_RFCTL_NEW_IPV6_EXT_DIS); ew32(RFCTL, reg); + + /* Enable ECC on Lynxpoint */ + if (hw->mac.type == e1000_pch_lpt) { + reg = er32(PBECCSTS); + reg |= E1000_PBECCSTS_ECC_ENABLE; + ew32(PBECCSTS, reg); + + reg = er32(CTRL); + reg |= E1000_CTRL_MEHE; + ew32(CTRL, reg); + } } /** @@ -3964,8 +3929,7 @@ void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw) if (ret_val) return; reg_data &= ~E1000_KMRNCTRLSTA_DIAG_NELPBK; - ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET, - reg_data); + e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET, reg_data); } /** @@ -4000,19 +3964,20 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw) if (!dev_spec->eee_disable) { u16 eee_advert; - ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR, - I217_EEE_ADVERTISEMENT); + ret_val = + e1000_read_emi_reg_locked(hw, + I217_EEE_ADVERTISEMENT, + &eee_advert); if (ret_val) goto release; - e1e_rphy_locked(hw, I82579_EMI_DATA, &eee_advert); /* Disable LPLU if both link partners support 100BaseT * EEE and 100Full is advertised on both ends of the * link. */ - if ((eee_advert & I217_EEE_100_SUPPORTED) && + if ((eee_advert & I82579_EEE_100_SUPPORTED) && (dev_spec->eee_lp_ability & - I217_EEE_100_SUPPORTED) && + I82579_EEE_100_SUPPORTED) && (hw->phy.autoneg_advertised & ADVERTISE_100_FULL)) phy_ctrl &= ~(E1000_PHY_CTRL_D0A_LPLU | E1000_PHY_CTRL_NOND0A_LPLU); @@ -4026,7 +3991,6 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw) * The SMBus release must also be disabled on LCD reset. */ if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) { - /* Enable proxy to reset only on power good. */ e1e_rphy_locked(hw, I217_PROXY_CTRL, &phy_reg); phy_reg |= I217_PROXY_CTRL_AUTO_DISABLE; @@ -4287,7 +4251,7 @@ static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw) u32 bank = 0; u32 status; - e1000e_get_cfg_done(hw); + e1000e_get_cfg_done_generic(hw); /* Wait for indication from h/w that it has completed basic config */ if (hw->mac.type >= e1000_ich10lan) { @@ -4416,7 +4380,7 @@ static const struct e1000_mac_operations ich8_mac_ops = { .reset_hw = e1000_reset_hw_ich8lan, .init_hw = e1000_init_hw_ich8lan, .setup_link = e1000_setup_link_ich8lan, - .setup_physical_interface= e1000_setup_copper_link_ich8lan, + .setup_physical_interface = e1000_setup_copper_link_ich8lan, /* id_led_init dependent on mac type */ .config_collision_dist = e1000e_config_collision_dist_generic, .rar_set = e1000e_rar_set_generic, @@ -4438,7 +4402,7 @@ static const struct e1000_phy_operations ich8_phy_ops = { static const struct e1000_nvm_operations ich8_nvm_ops = { .acquire = e1000_acquire_nvm_ich8lan, - .read = e1000_read_nvm_ich8lan, + .read = e1000_read_nvm_ich8lan, .release = e1000_release_nvm_ich8lan, .reload = e1000e_reload_nvm_generic, .update = e1000_update_nvm_checksum_ich8lan, @@ -4520,6 +4484,7 @@ const struct e1000_info e1000_pch2_info = { .mac = e1000_pch2lan, .flags = FLAG_IS_ICH | FLAG_HAS_WOL + | FLAG_HAS_HW_TIMESTAMP | FLAG_HAS_CTRLEXT_ON_LOAD | FLAG_HAS_AMT | FLAG_HAS_FLASH @@ -4528,7 +4493,7 @@ const struct e1000_info e1000_pch2_info = { .flags2 = FLAG2_HAS_PHY_STATS | FLAG2_HAS_EEE, .pba = 26, - .max_hw_frame_size = DEFAULT_JUMBO, + .max_hw_frame_size = 9018, .get_variants = e1000_get_variants_ich8lan, .mac_ops = &ich8_mac_ops, .phy_ops = &ich8_phy_ops, @@ -4539,6 +4504,7 @@ const struct e1000_info e1000_pch_lpt_info = { .mac = e1000_pch_lpt, .flags = FLAG_IS_ICH | FLAG_HAS_WOL + | FLAG_HAS_HW_TIMESTAMP | FLAG_HAS_CTRLEXT_ON_LOAD | FLAG_HAS_AMT | FLAG_HAS_FLASH @@ -4547,7 +4513,7 @@ const struct e1000_info e1000_pch_lpt_info = { .flags2 = FLAG2_HAS_PHY_STATS | FLAG2_HAS_EEE, .pba = 26, - .max_hw_frame_size = DEFAULT_JUMBO, + .max_hw_frame_size = 9018, .get_variants = e1000_get_variants_ich8lan, .mac_ops = &ich8_mac_ops, .phy_ops = &ich8_phy_ops, diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h new file mode 100644 index 00000000000..b6d3174d7d2 --- /dev/null +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h @@ -0,0 +1,268 @@ +/******************************************************************************* + + Intel PRO/1000 Linux driver + Copyright(c) 1999 - 2013 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000E_ICH8LAN_H_ +#define _E1000E_ICH8LAN_H_ + +#define ICH_FLASH_GFPREG 0x0000 +#define ICH_FLASH_HSFSTS 0x0004 +#define ICH_FLASH_HSFCTL 0x0006 +#define ICH_FLASH_FADDR 0x0008 +#define ICH_FLASH_FDATA0 0x0010 +#define ICH_FLASH_PR0 0x0074 + +/* Requires up to 10 seconds when MNG might be accessing part. */ +#define ICH_FLASH_READ_COMMAND_TIMEOUT 10000000 +#define ICH_FLASH_WRITE_COMMAND_TIMEOUT 10000000 +#define ICH_FLASH_ERASE_COMMAND_TIMEOUT 10000000 +#define ICH_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF +#define ICH_FLASH_CYCLE_REPEAT_COUNT 10 + +#define ICH_CYCLE_READ 0 +#define ICH_CYCLE_WRITE 2 +#define ICH_CYCLE_ERASE 3 + +#define FLASH_GFPREG_BASE_MASK 0x1FFF +#define FLASH_SECTOR_ADDR_SHIFT 12 + +#define ICH_FLASH_SEG_SIZE_256 256 +#define ICH_FLASH_SEG_SIZE_4K 4096 +#define ICH_FLASH_SEG_SIZE_8K 8192 +#define ICH_FLASH_SEG_SIZE_64K 65536 + +#define E1000_ICH_FWSM_RSPCIPHY 0x00000040 /* Reset PHY on PCI Reset */ +/* FW established a valid mode */ +#define E1000_ICH_FWSM_FW_VALID 0x00008000 +#define E1000_ICH_FWSM_PCIM2PCI 0x01000000 /* ME PCIm-to-PCI active */ +#define E1000_ICH_FWSM_PCIM2PCI_COUNT 2000 + +#define E1000_ICH_MNG_IAMT_MODE 0x2 + +#define E1000_FWSM_WLOCK_MAC_MASK 0x0380 +#define E1000_FWSM_WLOCK_MAC_SHIFT 7 + +/* Shared Receive Address Registers */ +#define E1000_SHRAL_PCH_LPT(_i) (0x05408 + ((_i) * 8)) +#define E1000_SHRAH_PCH_LPT(_i) (0x0540C + ((_i) * 8)) + +#define ID_LED_DEFAULT_ICH8LAN ((ID_LED_DEF1_DEF2 << 12) | \ + (ID_LED_OFF1_OFF2 << 8) | \ + (ID_LED_OFF1_ON2 << 4) | \ + (ID_LED_DEF1_DEF2)) + +#define E1000_ICH_NVM_SIG_WORD 0x13 +#define E1000_ICH_NVM_SIG_MASK 0xC000 +#define E1000_ICH_NVM_VALID_SIG_MASK 0xC0 +#define E1000_ICH_NVM_SIG_VALUE 0x80 + +#define E1000_ICH8_LAN_INIT_TIMEOUT 1500 + +#define E1000_FEXTNVM_SW_CONFIG 1 +#define E1000_FEXTNVM_SW_CONFIG_ICH8M (1 << 27) /* different on ICH8M */ + +#define E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK 0x0C000000 +#define E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC 0x08000000 + +#define E1000_FEXTNVM4_BEACON_DURATION_MASK 0x7 +#define E1000_FEXTNVM4_BEACON_DURATION_8USEC 0x7 +#define E1000_FEXTNVM4_BEACON_DURATION_16USEC 0x3 + +#define PCIE_ICH8_SNOOP_ALL PCIE_NO_SNOOP_ALL + +#define E1000_ICH_RAR_ENTRIES 7 +#define E1000_PCH2_RAR_ENTRIES 5 /* RAR[0], SHRA[0-3] */ +#define E1000_PCH_LPT_RAR_ENTRIES 12 /* RAR[0], SHRA[0-10] */ + +#define PHY_PAGE_SHIFT 5 +#define PHY_REG(page, reg) (((page) << PHY_PAGE_SHIFT) | \ + ((reg) & MAX_PHY_REG_ADDRESS)) +#define IGP3_KMRN_DIAG PHY_REG(770, 19) /* KMRN Diagnostic */ +#define IGP3_VR_CTRL PHY_REG(776, 18) /* Voltage Regulator Control */ + +#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS 0x0002 +#define IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK 0x0300 +#define IGP3_VR_CTRL_MODE_SHUTDOWN 0x0200 + +/* PHY Wakeup Registers and defines */ +#define BM_PORT_GEN_CFG PHY_REG(BM_PORT_CTRL_PAGE, 17) +#define BM_RCTL PHY_REG(BM_WUC_PAGE, 0) +#define BM_WUC PHY_REG(BM_WUC_PAGE, 1) +#define BM_WUFC PHY_REG(BM_WUC_PAGE, 2) +#define BM_WUS PHY_REG(BM_WUC_PAGE, 3) +#define BM_RAR_L(_i) (BM_PHY_REG(BM_WUC_PAGE, 16 + ((_i) << 2))) +#define BM_RAR_M(_i) (BM_PHY_REG(BM_WUC_PAGE, 17 + ((_i) << 2))) +#define BM_RAR_H(_i) (BM_PHY_REG(BM_WUC_PAGE, 18 + ((_i) << 2))) +#define BM_RAR_CTRL(_i) (BM_PHY_REG(BM_WUC_PAGE, 19 + ((_i) << 2))) +#define BM_MTA(_i) (BM_PHY_REG(BM_WUC_PAGE, 128 + ((_i) << 1))) + +#define BM_RCTL_UPE 0x0001 /* Unicast Promiscuous Mode */ +#define BM_RCTL_MPE 0x0002 /* Multicast Promiscuous Mode */ +#define BM_RCTL_MO_SHIFT 3 /* Multicast Offset Shift */ +#define BM_RCTL_MO_MASK (3 << 3) /* Multicast Offset Mask */ +#define BM_RCTL_BAM 0x0020 /* Broadcast Accept Mode */ +#define BM_RCTL_PMCF 0x0040 /* Pass MAC Control Frames */ +#define BM_RCTL_RFCE 0x0080 /* Rx Flow Control Enable */ + +#define HV_LED_CONFIG PHY_REG(768, 30) /* LED Configuration */ +#define HV_MUX_DATA_CTRL PHY_REG(776, 16) +#define HV_MUX_DATA_CTRL_GEN_TO_MAC 0x0400 +#define HV_MUX_DATA_CTRL_FORCE_SPEED 0x0004 +#define HV_STATS_PAGE 778 +/* Half-duplex collision counts */ +#define HV_SCC_UPPER PHY_REG(HV_STATS_PAGE, 16) /* Single Collision */ +#define HV_SCC_LOWER PHY_REG(HV_STATS_PAGE, 17) +#define HV_ECOL_UPPER PHY_REG(HV_STATS_PAGE, 18) /* Excessive Coll. */ +#define HV_ECOL_LOWER PHY_REG(HV_STATS_PAGE, 19) +#define HV_MCC_UPPER PHY_REG(HV_STATS_PAGE, 20) /* Multiple Collision */ +#define HV_MCC_LOWER PHY_REG(HV_STATS_PAGE, 21) +#define HV_LATECOL_UPPER PHY_REG(HV_STATS_PAGE, 23) /* Late Collision */ +#define HV_LATECOL_LOWER PHY_REG(HV_STATS_PAGE, 24) +#define HV_COLC_UPPER PHY_REG(HV_STATS_PAGE, 25) /* Collision */ +#define HV_COLC_LOWER PHY_REG(HV_STATS_PAGE, 26) +#define HV_DC_UPPER PHY_REG(HV_STATS_PAGE, 27) /* Defer Count */ +#define HV_DC_LOWER PHY_REG(HV_STATS_PAGE, 28) +#define HV_TNCRS_UPPER PHY_REG(HV_STATS_PAGE, 29) /* Tx with no CRS */ +#define HV_TNCRS_LOWER PHY_REG(HV_STATS_PAGE, 30) + +#define E1000_FCRTV_PCH 0x05F40 /* PCH Flow Control Refresh Timer Value */ + +#define E1000_NVM_K1_CONFIG 0x1B /* NVM K1 Config Word */ +#define E1000_NVM_K1_ENABLE 0x1 /* NVM Enable K1 bit */ + +/* SMBus Control Phy Register */ +#define CV_SMB_CTRL PHY_REG(769, 23) +#define CV_SMB_CTRL_FORCE_SMBUS 0x0001 + +/* SMBus Address Phy Register */ +#define HV_SMB_ADDR PHY_REG(768, 26) +#define HV_SMB_ADDR_MASK 0x007F +#define HV_SMB_ADDR_PEC_EN 0x0200 +#define HV_SMB_ADDR_VALID 0x0080 +#define HV_SMB_ADDR_FREQ_MASK 0x1100 +#define HV_SMB_ADDR_FREQ_LOW_SHIFT 8 +#define HV_SMB_ADDR_FREQ_HIGH_SHIFT 12 + +/* Strapping Option Register - RO */ +#define E1000_STRAP 0x0000C +#define E1000_STRAP_SMBUS_ADDRESS_MASK 0x00FE0000 +#define E1000_STRAP_SMBUS_ADDRESS_SHIFT 17 +#define E1000_STRAP_SMT_FREQ_MASK 0x00003000 +#define E1000_STRAP_SMT_FREQ_SHIFT 12 + +/* OEM Bits Phy Register */ +#define HV_OEM_BITS PHY_REG(768, 25) +#define HV_OEM_BITS_LPLU 0x0004 /* Low Power Link Up */ +#define HV_OEM_BITS_GBE_DIS 0x0040 /* Gigabit Disable */ +#define HV_OEM_BITS_RESTART_AN 0x0400 /* Restart Auto-negotiation */ + +/* KMRN Mode Control */ +#define HV_KMRN_MODE_CTRL PHY_REG(769, 16) +#define HV_KMRN_MDIO_SLOW 0x0400 + +/* KMRN FIFO Control and Status */ +#define HV_KMRN_FIFO_CTRLSTA PHY_REG(770, 16) +#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK 0x7000 +#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT 12 + +/* PHY Power Management Control */ +#define HV_PM_CTRL PHY_REG(770, 17) +#define HV_PM_CTRL_PLL_STOP_IN_K1_GIGA 0x100 + +#define SW_FLAG_TIMEOUT 1000 /* SW Semaphore flag timeout in ms */ + +/* PHY Low Power Idle Control */ +#define I82579_LPI_CTRL PHY_REG(772, 20) +#define I82579_LPI_CTRL_100_ENABLE 0x2000 +#define I82579_LPI_CTRL_1000_ENABLE 0x4000 +#define I82579_LPI_CTRL_ENABLE_MASK 0x6000 +#define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT 0x80 + +/* Extended Management Interface (EMI) Registers */ +#define I82579_EMI_ADDR 0x10 +#define I82579_EMI_DATA 0x11 +#define I82579_LPI_UPDATE_TIMER 0x4805 /* in 40ns units + 40 ns base value */ +#define I82579_MSE_THRESHOLD 0x084F /* 82579 Mean Square Error Threshold */ +#define I82577_MSE_THRESHOLD 0x0887 /* 82577 Mean Square Error Threshold */ +#define I82579_MSE_LINK_DOWN 0x2411 /* MSE count before dropping link */ +#define I82579_EEE_PCS_STATUS 0x182D /* IEEE MMD Register 3.1 >> 8 */ +#define I82579_EEE_CAPABILITY 0x0410 /* IEEE MMD Register 3.20 */ +#define I82579_EEE_ADVERTISEMENT 0x040E /* IEEE MMD Register 7.60 */ +#define I82579_EEE_LP_ABILITY 0x040F /* IEEE MMD Register 7.61 */ +#define I82579_EEE_100_SUPPORTED (1 << 1) /* 100BaseTx EEE */ +#define I82579_EEE_1000_SUPPORTED (1 << 2) /* 1000BaseTx EEE */ +#define I217_EEE_PCS_STATUS 0x9401 /* IEEE MMD Register 3.1 */ +#define I217_EEE_CAPABILITY 0x8000 /* IEEE MMD Register 3.20 */ +#define I217_EEE_ADVERTISEMENT 0x8001 /* IEEE MMD Register 7.60 */ +#define I217_EEE_LP_ABILITY 0x8002 /* IEEE MMD Register 7.61 */ + +#define E1000_EEE_RX_LPI_RCVD 0x0400 /* Tx LP idle received */ +#define E1000_EEE_TX_LPI_RCVD 0x0800 /* Rx LP idle received */ + +/* Intel Rapid Start Technology Support */ +#define I217_PROXY_CTRL BM_PHY_REG(BM_WUC_PAGE, 70) +#define I217_PROXY_CTRL_AUTO_DISABLE 0x0080 +#define I217_SxCTRL PHY_REG(BM_PORT_CTRL_PAGE, 28) +#define I217_SxCTRL_ENABLE_LPI_RESET 0x1000 +#define I217_CGFREG PHY_REG(772, 29) +#define I217_CGFREG_ENABLE_MTA_RESET 0x0002 +#define I217_MEMPWR PHY_REG(772, 26) +#define I217_MEMPWR_DISABLE_SMB_RELEASE 0x0010 + +/* Receive Address Initial CRC Calculation */ +#define E1000_PCH_RAICC(_n) (0x05F50 + ((_n) * 4)) + +/* Latency Tolerance Reporting */ +#define E1000_LTRV 0x000F8 +#define E1000_LTRV_SCALE_MAX 5 +#define E1000_LTRV_SCALE_FACTOR 5 +#define E1000_LTRV_REQ_SHIFT 15 +#define E1000_LTRV_NOSNOOP_SHIFT 16 +#define E1000_LTRV_SEND (1 << 30) + +/* Proprietary Latency Tolerance Reporting PCI Capability */ +#define E1000_PCI_LTR_CAP_LPT 0xA8 + +/* OBFF Control & Threshold Defines */ +#define E1000_SVCR_OFF_EN 0x00000001 +#define E1000_SVCR_OFF_MASKINT 0x00001000 +#define E1000_SVCR_OFF_TIMER_MASK 0xFFFF0000 +#define E1000_SVCR_OFF_TIMER_SHIFT 16 +#define E1000_SVT_OFF_HWM_MASK 0x0000001F + +void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw); +void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw, + bool state); +void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw); +void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw); +void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw); +void e1000_resume_workarounds_pchlan(struct e1000_hw *hw); +s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable); +void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw); +s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable); +s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data); +#endif /* _E1000E_ICH8LAN_H_ */ diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c index 54d9dafaf12..b78e0217460 100644 --- a/drivers/net/ethernet/intel/e1000e/mac.c +++ b/drivers/net/ethernet/intel/e1000e/mac.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -165,7 +165,7 @@ void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count) s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw) { u32 i; - s32 ret_val = 0; + s32 ret_val; u16 offset, nvm_alt_mac_addr_offset, nvm_data; u8 alt_mac_addr[ETH_ALEN]; @@ -1021,6 +1021,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) { struct e1000_mac_info *mac = &hw->mac; s32 ret_val = 0; + u32 pcs_status_reg, pcs_adv_reg, pcs_lp_ability_reg, pcs_ctrl_reg; u16 mii_status_reg, mii_nway_adv_reg, mii_nway_lp_ability_reg; u16 speed, duplex; @@ -1052,14 +1053,14 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) * has completed. We read this twice because this reg has * some "sticky" (latched) bits. */ - ret_val = e1e_rphy(hw, PHY_STATUS, &mii_status_reg); + ret_val = e1e_rphy(hw, MII_BMSR, &mii_status_reg); if (ret_val) return ret_val; - ret_val = e1e_rphy(hw, PHY_STATUS, &mii_status_reg); + ret_val = e1e_rphy(hw, MII_BMSR, &mii_status_reg); if (ret_val) return ret_val; - if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) { + if (!(mii_status_reg & BMSR_ANEGCOMPLETE)) { e_dbg("Copper PHY and Auto Neg has not completed.\n"); return ret_val; } @@ -1070,11 +1071,10 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) * Page Ability Register (Address 5) to determine how * flow control was negotiated. */ - ret_val = e1e_rphy(hw, PHY_AUTONEG_ADV, &mii_nway_adv_reg); + ret_val = e1e_rphy(hw, MII_ADVERTISE, &mii_nway_adv_reg); if (ret_val) return ret_val; - ret_val = - e1e_rphy(hw, PHY_LP_ABILITY, &mii_nway_lp_ability_reg); + ret_val = e1e_rphy(hw, MII_LPA, &mii_nway_lp_ability_reg); if (ret_val) return ret_val; @@ -1111,8 +1111,8 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) * 1 | DC | 1 | DC | E1000_fc_full * */ - if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && - (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) { + if ((mii_nway_adv_reg & ADVERTISE_PAUSE_CAP) && + (mii_nway_lp_ability_reg & LPA_PAUSE_CAP)) { /* Now we need to check if the user selected Rx ONLY * of pause frames. In this case, we had to advertise * FULL flow control because we could not advertise Rx @@ -1134,10 +1134,10 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) *-------|---------|-------|---------|-------------------- * 0 | 1 | 1 | 1 | e1000_fc_tx_pause */ - else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) && - (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && - (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && - (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { + else if (!(mii_nway_adv_reg & ADVERTISE_PAUSE_CAP) && + (mii_nway_adv_reg & ADVERTISE_PAUSE_ASYM) && + (mii_nway_lp_ability_reg & LPA_PAUSE_CAP) && + (mii_nway_lp_ability_reg & LPA_PAUSE_ASYM)) { hw->fc.current_mode = e1000_fc_tx_pause; e_dbg("Flow Control = Tx PAUSE frames only.\n"); } @@ -1148,10 +1148,10 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) *-------|---------|-------|---------|-------------------- * 1 | 1 | 0 | 1 | e1000_fc_rx_pause */ - else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && - (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && - !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && - (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { + else if ((mii_nway_adv_reg & ADVERTISE_PAUSE_CAP) && + (mii_nway_adv_reg & ADVERTISE_PAUSE_ASYM) && + !(mii_nway_lp_ability_reg & LPA_PAUSE_CAP) && + (mii_nway_lp_ability_reg & LPA_PAUSE_ASYM)) { hw->fc.current_mode = e1000_fc_rx_pause; e_dbg("Flow Control = Rx PAUSE frames only.\n"); } else { @@ -1185,6 +1185,130 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) } } + /* Check for the case where we have SerDes media and auto-neg is + * enabled. In this case, we need to check and see if Auto-Neg + * has completed, and if so, how the PHY and link partner has + * flow control configured. + */ + if ((hw->phy.media_type == e1000_media_type_internal_serdes) && + mac->autoneg) { + /* Read the PCS_LSTS and check to see if AutoNeg + * has completed. + */ + pcs_status_reg = er32(PCS_LSTAT); + + if (!(pcs_status_reg & E1000_PCS_LSTS_AN_COMPLETE)) { + e_dbg("PCS Auto Neg has not completed.\n"); + return ret_val; + } + + /* The AutoNeg process has completed, so we now need to + * read both the Auto Negotiation Advertisement + * Register (PCS_ANADV) and the Auto_Negotiation Base + * Page Ability Register (PCS_LPAB) to determine how + * flow control was negotiated. + */ + pcs_adv_reg = er32(PCS_ANADV); + pcs_lp_ability_reg = er32(PCS_LPAB); + + /* Two bits in the Auto Negotiation Advertisement Register + * (PCS_ANADV) and two bits in the Auto Negotiation Base + * Page Ability Register (PCS_LPAB) determine flow control + * for both the PHY and the link partner. The following + * table, taken out of the IEEE 802.3ab/D6.0 dated March 25, + * 1999, describes these PAUSE resolution bits and how flow + * control is determined based upon these settings. + * NOTE: DC = Don't Care + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution + *-------|---------|-------|---------|-------------------- + * 0 | 0 | DC | DC | e1000_fc_none + * 0 | 1 | 0 | DC | e1000_fc_none + * 0 | 1 | 1 | 0 | e1000_fc_none + * 0 | 1 | 1 | 1 | e1000_fc_tx_pause + * 1 | 0 | 0 | DC | e1000_fc_none + * 1 | DC | 1 | DC | e1000_fc_full + * 1 | 1 | 0 | 0 | e1000_fc_none + * 1 | 1 | 0 | 1 | e1000_fc_rx_pause + * + * Are both PAUSE bits set to 1? If so, this implies + * Symmetric Flow Control is enabled at both ends. The + * ASM_DIR bits are irrelevant per the spec. + * + * For Symmetric Flow Control: + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result + *-------|---------|-------|---------|-------------------- + * 1 | DC | 1 | DC | e1000_fc_full + * + */ + if ((pcs_adv_reg & E1000_TXCW_PAUSE) && + (pcs_lp_ability_reg & E1000_TXCW_PAUSE)) { + /* Now we need to check if the user selected Rx ONLY + * of pause frames. In this case, we had to advertise + * FULL flow control because we could not advertise Rx + * ONLY. Hence, we must now check to see if we need to + * turn OFF the TRANSMISSION of PAUSE frames. + */ + if (hw->fc.requested_mode == e1000_fc_full) { + hw->fc.current_mode = e1000_fc_full; + e_dbg("Flow Control = FULL.\n"); + } else { + hw->fc.current_mode = e1000_fc_rx_pause; + e_dbg("Flow Control = Rx PAUSE frames only.\n"); + } + } + /* For receiving PAUSE frames ONLY. + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result + *-------|---------|-------|---------|-------------------- + * 0 | 1 | 1 | 1 | e1000_fc_tx_pause + */ + else if (!(pcs_adv_reg & E1000_TXCW_PAUSE) && + (pcs_adv_reg & E1000_TXCW_ASM_DIR) && + (pcs_lp_ability_reg & E1000_TXCW_PAUSE) && + (pcs_lp_ability_reg & E1000_TXCW_ASM_DIR)) { + hw->fc.current_mode = e1000_fc_tx_pause; + e_dbg("Flow Control = Tx PAUSE frames only.\n"); + } + /* For transmitting PAUSE frames ONLY. + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result + *-------|---------|-------|---------|-------------------- + * 1 | 1 | 0 | 1 | e1000_fc_rx_pause + */ + else if ((pcs_adv_reg & E1000_TXCW_PAUSE) && + (pcs_adv_reg & E1000_TXCW_ASM_DIR) && + !(pcs_lp_ability_reg & E1000_TXCW_PAUSE) && + (pcs_lp_ability_reg & E1000_TXCW_ASM_DIR)) { + hw->fc.current_mode = e1000_fc_rx_pause; + e_dbg("Flow Control = Rx PAUSE frames only.\n"); + } else { + /* Per the IEEE spec, at this point flow control + * should be disabled. + */ + hw->fc.current_mode = e1000_fc_none; + e_dbg("Flow Control = NONE.\n"); + } + + /* Now we call a subroutine to actually force the MAC + * controller to use the correct flow control settings. + */ + pcs_ctrl_reg = er32(PCS_LCTL); + pcs_ctrl_reg |= E1000_PCS_LCTL_FORCE_FCTRL; + ew32(PCS_LCTL, pcs_ctrl_reg); + + ret_val = e1000e_force_mac_fc(hw); + if (ret_val) { + e_dbg("Error forcing flow control settings\n"); + return ret_val; + } + } + return 0; } @@ -1231,8 +1355,8 @@ s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, * Sets the speed and duplex to gigabit full duplex (the only possible option) * for fiber/serdes links. **/ -s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw, u16 *speed, - u16 *duplex) +s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw __always_unused + *hw, u16 *speed, u16 *duplex) { *speed = SPEED_1000; *duplex = FULL_DUPLEX; diff --git a/drivers/net/ethernet/intel/e1000e/mac.h b/drivers/net/ethernet/intel/e1000e/mac.h new file mode 100644 index 00000000000..a61fee404eb --- /dev/null +++ b/drivers/net/ethernet/intel/e1000e/mac.h @@ -0,0 +1,74 @@ +/******************************************************************************* + + Intel PRO/1000 Linux driver + Copyright(c) 1999 - 2013 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000E_MAC_H_ +#define _E1000E_MAC_H_ + +s32 e1000e_blink_led_generic(struct e1000_hw *hw); +s32 e1000e_check_for_copper_link(struct e1000_hw *hw); +s32 e1000e_check_for_fiber_link(struct e1000_hw *hw); +s32 e1000e_check_for_serdes_link(struct e1000_hw *hw); +s32 e1000e_cleanup_led_generic(struct e1000_hw *hw); +s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw); +s32 e1000e_disable_pcie_master(struct e1000_hw *hw); +s32 e1000e_force_mac_fc(struct e1000_hw *hw); +s32 e1000e_get_auto_rd_done(struct e1000_hw *hw); +s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw); +void e1000_set_lan_id_single_port(struct e1000_hw *hw); +s32 e1000e_get_hw_semaphore(struct e1000_hw *hw); +s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, + u16 *duplex); +s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw, + u16 *speed, u16 *duplex); +s32 e1000e_id_led_init_generic(struct e1000_hw *hw); +s32 e1000e_led_on_generic(struct e1000_hw *hw); +s32 e1000e_led_off_generic(struct e1000_hw *hw); +void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw, + u8 *mc_addr_list, u32 mc_addr_count); +s32 e1000e_set_fc_watermarks(struct e1000_hw *hw); +s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw); +s32 e1000e_setup_led_generic(struct e1000_hw *hw); +s32 e1000e_setup_link_generic(struct e1000_hw *hw); +s32 e1000e_validate_mdi_setting_generic(struct e1000_hw *hw); +s32 e1000e_validate_mdi_setting_crossover_generic(struct e1000_hw *hw); + +void e1000e_clear_hw_cntrs_base(struct e1000_hw *hw); +void e1000_clear_vfta_generic(struct e1000_hw *hw); +void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count); +void e1000e_put_hw_semaphore(struct e1000_hw *hw); +s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw); +void e1000e_reset_adaptive(struct e1000_hw *hw); +void e1000e_set_pcie_no_snoop(struct e1000_hw *hw, u32 no_snoop); +void e1000e_update_adaptive(struct e1000_hw *hw); +void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value); + +void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw); +void e1000e_rar_set_generic(struct e1000_hw *hw, u8 *addr, u32 index); +void e1000e_config_collision_dist_generic(struct e1000_hw *hw); + +#endif diff --git a/drivers/net/ethernet/intel/e1000e/manage.c b/drivers/net/ethernet/intel/e1000e/manage.c index 6dc47beb3ad..e4b0f1ef92f 100644 --- a/drivers/net/ethernet/intel/e1000e/manage.c +++ b/drivers/net/ethernet/intel/e1000e/manage.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -28,19 +28,6 @@ #include "e1000.h" -enum e1000_mng_mode { - e1000_mng_mode_none = 0, - e1000_mng_mode_asf, - e1000_mng_mode_pt, - e1000_mng_mode_ipmi, - e1000_mng_mode_host_if_only -}; - -#define E1000_FACTPS_MNGCG 0x20000000 - -/* Intel(R) Active Management Technology signature */ -#define E1000_IAMT_SIGNATURE 0x544D4149 - /** * e1000_calculate_checksum - Calculate checksum for buffer * @buffer: pointer to EEPROM diff --git a/drivers/net/ethernet/intel/e1000e/manage.h b/drivers/net/ethernet/intel/e1000e/manage.h new file mode 100644 index 00000000000..326897c29ea --- /dev/null +++ b/drivers/net/ethernet/intel/e1000e/manage.h @@ -0,0 +1,72 @@ +/******************************************************************************* + + Intel PRO/1000 Linux driver + Copyright(c) 1999 - 2013 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000E_MANAGE_H_ +#define _E1000E_MANAGE_H_ + +bool e1000e_check_mng_mode_generic(struct e1000_hw *hw); +bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw); +s32 e1000e_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length); +bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw); + +enum e1000_mng_mode { + e1000_mng_mode_none = 0, + e1000_mng_mode_asf, + e1000_mng_mode_pt, + e1000_mng_mode_ipmi, + e1000_mng_mode_host_if_only +}; + +#define E1000_FACTPS_MNGCG 0x20000000 + +#define E1000_FWSM_MODE_MASK 0xE +#define E1000_FWSM_MODE_SHIFT 1 + +#define E1000_MNG_IAMT_MODE 0x3 +#define E1000_MNG_DHCP_COOKIE_LENGTH 0x10 +#define E1000_MNG_DHCP_COOKIE_OFFSET 0x6F0 +#define E1000_MNG_DHCP_COMMAND_TIMEOUT 10 +#define E1000_MNG_DHCP_TX_PAYLOAD_CMD 64 +#define E1000_MNG_DHCP_COOKIE_STATUS_PARSING 0x1 +#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN 0x2 + +#define E1000_VFTA_ENTRY_SHIFT 5 +#define E1000_VFTA_ENTRY_MASK 0x7F +#define E1000_VFTA_ENTRY_BIT_SHIFT_MASK 0x1F + +#define E1000_HICR_EN 0x01 /* Enable bit - RO */ +/* Driver sets this bit when done to put command in RAM */ +#define E1000_HICR_C 0x02 +#define E1000_HICR_SV 0x04 /* Status Validity */ +#define E1000_HICR_FW_RESET_ENABLE 0x40 +#define E1000_HICR_FW_RESET 0x80 + +/* Intel(R) Active Management Technology signature */ +#define E1000_IAMT_SIGNATURE 0x544D4149 + +#endif diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index fbf75fdca99..a177b8b65c4 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -42,7 +42,6 @@ #include <linux/slab.h> #include <net/checksum.h> #include <net/ip6_checksum.h> -#include <linux/mii.h> #include <linux/ethtool.h> #include <linux/if_vlan.h> #include <linux/cpu.h> @@ -56,7 +55,7 @@ #define DRV_EXTRAVERSION "-k" -#define DRV_VERSION "2.1.4" DRV_EXTRAVERSION +#define DRV_VERSION "2.2.14" DRV_EXTRAVERSION char e1000e_driver_name[] = "e1000e"; const char e1000e_driver_version[] = DRV_VERSION; @@ -87,20 +86,7 @@ struct e1000_reg_info { char *name; }; -#define E1000_RDFH 0x02410 /* Rx Data FIFO Head - RW */ -#define E1000_RDFT 0x02418 /* Rx Data FIFO Tail - RW */ -#define E1000_RDFHS 0x02420 /* Rx Data FIFO Head Saved - RW */ -#define E1000_RDFTS 0x02428 /* Rx Data FIFO Tail Saved - RW */ -#define E1000_RDFPC 0x02430 /* Rx Data FIFO Packet Count - RW */ - -#define E1000_TDFH 0x03410 /* Tx Data FIFO Head - RW */ -#define E1000_TDFT 0x03418 /* Tx Data FIFO Tail - RW */ -#define E1000_TDFHS 0x03420 /* Tx Data FIFO Head Saved - RW */ -#define E1000_TDFTS 0x03428 /* Tx Data FIFO Tail Saved - RW */ -#define E1000_TDFPC 0x03430 /* Tx Data FIFO Packet Count - RW */ - static const struct e1000_reg_info e1000_reg_info_tbl[] = { - /* General Registers */ {E1000_CTRL, "CTRL"}, {E1000_STATUS, "STATUS"}, @@ -488,20 +474,87 @@ static int e1000_desc_unused(struct e1000_ring *ring) } /** + * e1000e_systim_to_hwtstamp - convert system time value to hw time stamp + * @adapter: board private structure + * @hwtstamps: time stamp structure to update + * @systim: unsigned 64bit system time value. + * + * Convert the system time value stored in the RX/TXSTMP registers into a + * hwtstamp which can be used by the upper level time stamping functions. + * + * The 'systim_lock' spinlock is used to protect the consistency of the + * system time value. This is needed because reading the 64 bit time + * value involves reading two 32 bit registers. The first read latches the + * value. + **/ +static void e1000e_systim_to_hwtstamp(struct e1000_adapter *adapter, + struct skb_shared_hwtstamps *hwtstamps, + u64 systim) +{ + u64 ns; + unsigned long flags; + + spin_lock_irqsave(&adapter->systim_lock, flags); + ns = timecounter_cyc2time(&adapter->tc, systim); + spin_unlock_irqrestore(&adapter->systim_lock, flags); + + memset(hwtstamps, 0, sizeof(*hwtstamps)); + hwtstamps->hwtstamp = ns_to_ktime(ns); +} + +/** + * e1000e_rx_hwtstamp - utility function which checks for Rx time stamp + * @adapter: board private structure + * @status: descriptor extended error and status field + * @skb: particular skb to include time stamp + * + * If the time stamp is valid, convert it into the timecounter ns value + * and store that result into the shhwtstamps structure which is passed + * up the network stack. + **/ +static void e1000e_rx_hwtstamp(struct e1000_adapter *adapter, u32 status, + struct sk_buff *skb) +{ + struct e1000_hw *hw = &adapter->hw; + u64 rxstmp; + + if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP) || + !(status & E1000_RXDEXT_STATERR_TST) || + !(er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_VALID)) + return; + + /* The Rx time stamp registers contain the time stamp. No other + * received packet will be time stamped until the Rx time stamp + * registers are read. Because only one packet can be time stamped + * at a time, the register values must belong to this packet and + * therefore none of the other additional attributes need to be + * compared. + */ + rxstmp = (u64)er32(RXSTMPL); + rxstmp |= (u64)er32(RXSTMPH) << 32; + e1000e_systim_to_hwtstamp(adapter, skb_hwtstamps(skb), rxstmp); + + adapter->flags2 &= ~FLAG2_CHECK_RX_HWTSTAMP; +} + +/** * e1000_receive_skb - helper function to handle Rx indications * @adapter: board private structure - * @status: descriptor status field as written by hardware + * @staterr: descriptor extended error and status field as written by hardware * @vlan: descriptor vlan field as written by hardware (no le/be conversion) * @skb: pointer to sk_buff to be indicated to stack **/ static void e1000_receive_skb(struct e1000_adapter *adapter, struct net_device *netdev, struct sk_buff *skb, - u8 status, __le16 vlan) + u32 staterr, __le16 vlan) { u16 tag = le16_to_cpu(vlan); + + e1000e_rx_hwtstamp(adapter, staterr, skb); + skb->protocol = eth_type_trans(skb, netdev); - if (status & E1000_RXD_STAT_VP) + if (staterr & E1000_RXD_STAT_VP) __vlan_hwaccel_put_tag(skb, tag); napi_gro_receive(&adapter->napi, skb); @@ -765,7 +818,7 @@ static void e1000_alloc_jumbo_rx_buffers(struct e1000_ring *rx_ring, struct e1000_buffer *buffer_info; struct sk_buff *skb; unsigned int i; - unsigned int bufsz = 256 - 16 /* for skb_reserve */; + unsigned int bufsz = 256 - 16; /* for skb_reserve */ i = rx_ring->next_to_use; buffer_info = &rx_ring->buffer_info[i]; @@ -1050,9 +1103,9 @@ static void e1000_print_hw_hang(struct work_struct *work) adapter->tx_hang_recheck = false; netif_stop_queue(netdev); - e1e_rphy(hw, PHY_STATUS, &phy_status); - e1e_rphy(hw, PHY_1000T_STATUS, &phy_1000t_status); - e1e_rphy(hw, PHY_EXT_STATUS, &phy_ext_status); + e1e_rphy(hw, MII_BMSR, &phy_status); + e1e_rphy(hw, MII_STAT1000, &phy_1000t_status); + e1e_rphy(hw, MII_ESTATUS, &phy_ext_status); pci_read_config_word(adapter->pdev, PCI_STATUS, &pci_status); @@ -1092,6 +1145,41 @@ static void e1000_print_hw_hang(struct work_struct *work) } /** + * e1000e_tx_hwtstamp_work - check for Tx time stamp + * @work: pointer to work struct + * + * This work function polls the TSYNCTXCTL valid bit to determine when a + * timestamp has been taken for the current stored skb. The timestamp must + * be for this skb because only one such packet is allowed in the queue. + */ +static void e1000e_tx_hwtstamp_work(struct work_struct *work) +{ + struct e1000_adapter *adapter = container_of(work, struct e1000_adapter, + tx_hwtstamp_work); + struct e1000_hw *hw = &adapter->hw; + + if (!adapter->tx_hwtstamp_skb) + return; + + if (er32(TSYNCTXCTL) & E1000_TSYNCTXCTL_VALID) { + struct skb_shared_hwtstamps shhwtstamps; + u64 txstmp; + + txstmp = er32(TXSTMPL); + txstmp |= (u64)er32(TXSTMPH) << 32; + + e1000e_systim_to_hwtstamp(adapter, &shhwtstamps, txstmp); + + skb_tstamp_tx(adapter->tx_hwtstamp_skb, &shhwtstamps); + dev_kfree_skb_any(adapter->tx_hwtstamp_skb); + adapter->tx_hwtstamp_skb = NULL; + } else { + /* reschedule to check later */ + schedule_work(&adapter->tx_hwtstamp_work); + } +} + +/** * e1000_clean_tx_irq - Reclaim resources after transmit completes * @tx_ring: Tx descriptor ring * @@ -1345,8 +1433,8 @@ copydone: cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP)) adapter->rx_hdr_split++; - e1000_receive_skb(adapter, netdev, skb, - staterr, rx_desc->wb.middle.vlan); + e1000_receive_skb(adapter, netdev, skb, staterr, + rx_desc->wb.middle.vlan); next_desc: rx_desc->wb.middle.status_error &= cpu_to_le32(~0xFF); @@ -1645,7 +1733,7 @@ static void e1000e_downshift_workaround(struct work_struct *work) * @irq: interrupt number * @data: pointer to a network interface device structure **/ -static irqreturn_t e1000_intr_msi(int irq, void *data) +static irqreturn_t e1000_intr_msi(int __always_unused irq, void *data) { struct net_device *netdev = data; struct e1000_adapter *adapter = netdev_priv(netdev); @@ -1671,13 +1759,30 @@ static irqreturn_t e1000_intr_msi(int irq, void *data) /* disable receives */ u32 rctl = er32(RCTL); ew32(RCTL, rctl & ~E1000_RCTL_EN); - adapter->flags |= FLAG_RX_RESTART_NOW; + adapter->flags |= FLAG_RESTART_NOW; } /* guard against interrupt when we're going down */ if (!test_bit(__E1000_DOWN, &adapter->state)) mod_timer(&adapter->watchdog_timer, jiffies + 1); } + /* Reset on uncorrectable ECC error */ + if ((icr & E1000_ICR_ECCER) && (hw->mac.type == e1000_pch_lpt)) { + u32 pbeccsts = er32(PBECCSTS); + + adapter->corr_errors += + pbeccsts & E1000_PBECCSTS_CORR_ERR_CNT_MASK; + adapter->uncorr_errors += + (pbeccsts & E1000_PBECCSTS_UNCORR_ERR_CNT_MASK) >> + E1000_PBECCSTS_UNCORR_ERR_CNT_SHIFT; + + /* Do the reset outside of interrupt context */ + schedule_work(&adapter->reset_task); + + /* return immediately since reset is imminent */ + return IRQ_HANDLED; + } + if (napi_schedule_prep(&adapter->napi)) { adapter->total_tx_bytes = 0; adapter->total_tx_packets = 0; @@ -1694,7 +1799,7 @@ static irqreturn_t e1000_intr_msi(int irq, void *data) * @irq: interrupt number * @data: pointer to a network interface device structure **/ -static irqreturn_t e1000_intr(int irq, void *data) +static irqreturn_t e1000_intr(int __always_unused irq, void *data) { struct net_device *netdev = data; struct e1000_adapter *adapter = netdev_priv(netdev); @@ -1734,13 +1839,30 @@ static irqreturn_t e1000_intr(int irq, void *data) /* disable receives */ rctl = er32(RCTL); ew32(RCTL, rctl & ~E1000_RCTL_EN); - adapter->flags |= FLAG_RX_RESTART_NOW; + adapter->flags |= FLAG_RESTART_NOW; } /* guard against interrupt when we're going down */ if (!test_bit(__E1000_DOWN, &adapter->state)) mod_timer(&adapter->watchdog_timer, jiffies + 1); } + /* Reset on uncorrectable ECC error */ + if ((icr & E1000_ICR_ECCER) && (hw->mac.type == e1000_pch_lpt)) { + u32 pbeccsts = er32(PBECCSTS); + + adapter->corr_errors += + pbeccsts & E1000_PBECCSTS_CORR_ERR_CNT_MASK; + adapter->uncorr_errors += + (pbeccsts & E1000_PBECCSTS_UNCORR_ERR_CNT_MASK) >> + E1000_PBECCSTS_UNCORR_ERR_CNT_SHIFT; + + /* Do the reset outside of interrupt context */ + schedule_work(&adapter->reset_task); + + /* return immediately since reset is imminent */ + return IRQ_HANDLED; + } + if (napi_schedule_prep(&adapter->napi)) { adapter->total_tx_bytes = 0; adapter->total_tx_packets = 0; @@ -1752,7 +1874,7 @@ static irqreturn_t e1000_intr(int irq, void *data) return IRQ_HANDLED; } -static irqreturn_t e1000_msix_other(int irq, void *data) +static irqreturn_t e1000_msix_other(int __always_unused irq, void *data) { struct net_device *netdev = data; struct e1000_adapter *adapter = netdev_priv(netdev); @@ -1784,8 +1906,7 @@ no_link_interrupt: return IRQ_HANDLED; } - -static irqreturn_t e1000_intr_msix_tx(int irq, void *data) +static irqreturn_t e1000_intr_msix_tx(int __always_unused irq, void *data) { struct net_device *netdev = data; struct e1000_adapter *adapter = netdev_priv(netdev); @@ -1803,7 +1924,7 @@ static irqreturn_t e1000_intr_msix_tx(int irq, void *data) return IRQ_HANDLED; } -static irqreturn_t e1000_intr_msix_rx(int irq, void *data) +static irqreturn_t e1000_intr_msix_rx(int __always_unused irq, void *data) { struct net_device *netdev = data; struct e1000_adapter *adapter = netdev_priv(netdev); @@ -1890,7 +2011,6 @@ static void e1000_configure_msix(struct e1000_adapter *adapter) ctrl_ext |= E1000_CTRL_EXT_PBA_CLR; /* Auto-Mask Other interrupts upon ICR read */ -#define E1000_EIAC_MASK_82574 0x01F00000 ew32(IAM, ~E1000_EIAC_MASK_82574 | E1000_IMS_OTHER); ctrl_ext |= E1000_CTRL_EXT_EIAME; ew32(CTRL_EXT, ctrl_ext); @@ -2104,6 +2224,8 @@ static void e1000_irq_enable(struct e1000_adapter *adapter) if (adapter->msix_entries) { ew32(EIAC_82574, adapter->eiac_mask & E1000_EIAC_MASK_82574); ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER | E1000_IMS_LSC); + } else if (hw->mac.type == e1000_pch_lpt) { + ew32(IMS, IMS_ENABLE_MASK | E1000_IMS_ECCER); } else { ew32(IMS, IMS_ENABLE_MASK); } @@ -2358,9 +2480,7 @@ void e1000e_free_rx_resources(struct e1000_ring *rx_ring) * while increasing bulk throughput. This functionality is controlled * by the InterruptThrottleRate module parameter. **/ -static unsigned int e1000_update_itr(struct e1000_adapter *adapter, - u16 itr_setting, int packets, - int bytes) +static unsigned int e1000_update_itr(u16 itr_setting, int packets, int bytes) { unsigned int retval = itr_setting; @@ -2405,7 +2525,6 @@ static unsigned int e1000_update_itr(struct e1000_adapter *adapter, static void e1000_set_itr(struct e1000_adapter *adapter) { - struct e1000_hw *hw = &adapter->hw; u16 current_itr; u32 new_itr = adapter->itr; @@ -2421,18 +2540,16 @@ static void e1000_set_itr(struct e1000_adapter *adapter) goto set_itr_now; } - adapter->tx_itr = e1000_update_itr(adapter, - adapter->tx_itr, - adapter->total_tx_packets, - adapter->total_tx_bytes); + adapter->tx_itr = e1000_update_itr(adapter->tx_itr, + adapter->total_tx_packets, + adapter->total_tx_bytes); /* conservative mode (itr 3) eliminates the lowest_latency setting */ if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency) adapter->tx_itr = low_latency; - adapter->rx_itr = e1000_update_itr(adapter, - adapter->rx_itr, - adapter->total_rx_packets, - adapter->total_rx_bytes); + adapter->rx_itr = e1000_update_itr(adapter->rx_itr, + adapter->total_rx_packets, + adapter->total_rx_bytes); /* conservative mode (itr 3) eliminates the lowest_latency setting */ if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency) adapter->rx_itr = low_latency; @@ -2468,10 +2585,7 @@ set_itr_now: if (adapter->msix_entries) adapter->rx_ring->set_itr = 1; else - if (new_itr) - ew32(ITR, 1000000000 / (new_itr * 256)); - else - ew32(ITR, 0); + e1000e_write_itr(adapter, new_itr); } } @@ -3013,7 +3127,7 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter) ew32(RCTL, rctl); /* just started the receive unit, no need to restart */ - adapter->flags &= ~FLAG_RX_RESTART_NOW; + adapter->flags &= ~FLAG_RESTART_NOW; } /** @@ -3108,18 +3222,23 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) rxcsum &= ~E1000_RXCSUM_TUOFL; ew32(RXCSUM, rxcsum); - if (adapter->hw.mac.type == e1000_pch2lan) { - /* With jumbo frames, excessive C-state transition - * latencies result in dropped transactions. - */ - if (adapter->netdev->mtu > ETH_DATA_LEN) { + /* With jumbo frames, excessive C-state transition latencies result + * in dropped transactions. + */ + if (adapter->netdev->mtu > ETH_DATA_LEN) { + u32 lat = + ((er32(PBA) & E1000_PBA_RXA_MASK) * 1024 - + adapter->max_frame_size) * 8 / 1000; + + if (adapter->flags & FLAG_IS_ICH) { u32 rxdctl = er32(RXDCTL(0)); ew32(RXDCTL(0), rxdctl | 0x3); - pm_qos_update_request(&adapter->netdev->pm_qos_req, 55); - } else { - pm_qos_update_request(&adapter->netdev->pm_qos_req, - PM_QOS_DEFAULT_VALUE); } + + pm_qos_update_request(&adapter->netdev->pm_qos_req, lat); + } else { + pm_qos_update_request(&adapter->netdev->pm_qos_req, + PM_QOS_DEFAULT_VALUE); } /* Enable Receives */ @@ -3308,6 +3427,241 @@ static void e1000e_setup_rss_hash(struct e1000_adapter *adapter) } /** + * e1000e_get_base_timinca - get default SYSTIM time increment attributes + * @adapter: board private structure + * @timinca: pointer to returned time increment attributes + * + * Get attributes for incrementing the System Time Register SYSTIML/H at + * the default base frequency, and set the cyclecounter shift value. + **/ +s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca) +{ + struct e1000_hw *hw = &adapter->hw; + u32 incvalue, incperiod, shift; + + /* Make sure clock is enabled on I217 before checking the frequency */ + if ((hw->mac.type == e1000_pch_lpt) && + !(er32(TSYNCTXCTL) & E1000_TSYNCTXCTL_ENABLED) && + !(er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_ENABLED)) { + u32 fextnvm7 = er32(FEXTNVM7); + + if (!(fextnvm7 & (1 << 0))) { + ew32(FEXTNVM7, fextnvm7 | (1 << 0)); + e1e_flush(); + } + } + + switch (hw->mac.type) { + case e1000_pch2lan: + case e1000_pch_lpt: + /* On I217, the clock frequency is 25MHz or 96MHz as + * indicated by the System Clock Frequency Indication + */ + if ((hw->mac.type != e1000_pch_lpt) || + (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI)) { + /* Stable 96MHz frequency */ + incperiod = INCPERIOD_96MHz; + incvalue = INCVALUE_96MHz; + shift = INCVALUE_SHIFT_96MHz; + adapter->cc.shift = shift + INCPERIOD_SHIFT_96MHz; + break; + } + /* fall-through */ + case e1000_82574: + case e1000_82583: + /* Stable 25MHz frequency */ + incperiod = INCPERIOD_25MHz; + incvalue = INCVALUE_25MHz; + shift = INCVALUE_SHIFT_25MHz; + adapter->cc.shift = shift; + break; + default: + return -EINVAL; + } + + *timinca = ((incperiod << E1000_TIMINCA_INCPERIOD_SHIFT) | + ((incvalue << shift) & E1000_TIMINCA_INCVALUE_MASK)); + + return 0; +} + +/** + * e1000e_config_hwtstamp - configure the hwtstamp registers and enable/disable + * @adapter: board private structure + * + * Outgoing time stamping can be enabled and disabled. Play nice and + * disable it when requested, although it shouldn't cause any overhead + * when no packet needs it. At most one packet in the queue may be + * marked for time stamping, otherwise it would be impossible to tell + * for sure to which packet the hardware time stamp belongs. + * + * Incoming time stamping has to be configured via the hardware filters. + * Not all combinations are supported, in particular event type has to be + * specified. Matching the kind of event packet is not supported, with the + * exception of "all V2 events regardless of level 2 or 4". + **/ +static int e1000e_config_hwtstamp(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct hwtstamp_config *config = &adapter->hwtstamp_config; + u32 tsync_tx_ctl = E1000_TSYNCTXCTL_ENABLED; + u32 tsync_rx_ctl = E1000_TSYNCRXCTL_ENABLED; + u32 rxmtrl = 0; + u16 rxudp = 0; + bool is_l4 = false; + bool is_l2 = false; + u32 regval; + s32 ret_val; + + if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP)) + return -EINVAL; + + /* flags reserved for future extensions - must be zero */ + if (config->flags) + return -EINVAL; + + switch (config->tx_type) { + case HWTSTAMP_TX_OFF: + tsync_tx_ctl = 0; + break; + case HWTSTAMP_TX_ON: + break; + default: + return -ERANGE; + } + + switch (config->rx_filter) { + case HWTSTAMP_FILTER_NONE: + tsync_rx_ctl = 0; + break; + case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: + tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L4_V1; + rxmtrl = E1000_RXMTRL_PTP_V1_SYNC_MESSAGE; + is_l4 = true; + break; + case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: + tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L4_V1; + rxmtrl = E1000_RXMTRL_PTP_V1_DELAY_REQ_MESSAGE; + is_l4 = true; + break; + case HWTSTAMP_FILTER_PTP_V2_L2_SYNC: + /* Also time stamps V2 L2 Path Delay Request/Response */ + tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_V2; + rxmtrl = E1000_RXMTRL_PTP_V2_SYNC_MESSAGE; + is_l2 = true; + break; + case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ: + /* Also time stamps V2 L2 Path Delay Request/Response. */ + tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_V2; + rxmtrl = E1000_RXMTRL_PTP_V2_DELAY_REQ_MESSAGE; + is_l2 = true; + break; + case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: + /* Hardware cannot filter just V2 L4 Sync messages; + * fall-through to V2 (both L2 and L4) Sync. + */ + case HWTSTAMP_FILTER_PTP_V2_SYNC: + /* Also time stamps V2 Path Delay Request/Response. */ + tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_L4_V2; + rxmtrl = E1000_RXMTRL_PTP_V2_SYNC_MESSAGE; + is_l2 = true; + is_l4 = true; + break; + case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ: + /* Hardware cannot filter just V2 L4 Delay Request messages; + * fall-through to V2 (both L2 and L4) Delay Request. + */ + case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ: + /* Also time stamps V2 Path Delay Request/Response. */ + tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_L4_V2; + rxmtrl = E1000_RXMTRL_PTP_V2_DELAY_REQ_MESSAGE; + is_l2 = true; + is_l4 = true; + break; + case HWTSTAMP_FILTER_PTP_V2_L4_EVENT: + case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: + /* Hardware cannot filter just V2 L4 or L2 Event messages; + * fall-through to all V2 (both L2 and L4) Events. + */ + case HWTSTAMP_FILTER_PTP_V2_EVENT: + tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_EVENT_V2; + config->rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT; + is_l2 = true; + is_l4 = true; + break; + case HWTSTAMP_FILTER_PTP_V1_L4_EVENT: + /* For V1, the hardware can only filter Sync messages or + * Delay Request messages but not both so fall-through to + * time stamp all packets. + */ + case HWTSTAMP_FILTER_ALL: + is_l2 = true; + is_l4 = true; + tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_ALL; + config->rx_filter = HWTSTAMP_FILTER_ALL; + break; + default: + return -ERANGE; + } + + /* enable/disable Tx h/w time stamping */ + regval = er32(TSYNCTXCTL); + regval &= ~E1000_TSYNCTXCTL_ENABLED; + regval |= tsync_tx_ctl; + ew32(TSYNCTXCTL, regval); + if ((er32(TSYNCTXCTL) & E1000_TSYNCTXCTL_ENABLED) != + (regval & E1000_TSYNCTXCTL_ENABLED)) { + e_err("Timesync Tx Control register not set as expected\n"); + return -EAGAIN; + } + + /* enable/disable Rx h/w time stamping */ + regval = er32(TSYNCRXCTL); + regval &= ~(E1000_TSYNCRXCTL_ENABLED | E1000_TSYNCRXCTL_TYPE_MASK); + regval |= tsync_rx_ctl; + ew32(TSYNCRXCTL, regval); + if ((er32(TSYNCRXCTL) & (E1000_TSYNCRXCTL_ENABLED | + E1000_TSYNCRXCTL_TYPE_MASK)) != + (regval & (E1000_TSYNCRXCTL_ENABLED | + E1000_TSYNCRXCTL_TYPE_MASK))) { + e_err("Timesync Rx Control register not set as expected\n"); + return -EAGAIN; + } + + /* L2: define ethertype filter for time stamped packets */ + if (is_l2) + rxmtrl |= ETH_P_1588; + + /* define which PTP packets get time stamped */ + ew32(RXMTRL, rxmtrl); + + /* Filter by destination port */ + if (is_l4) { + rxudp = PTP_EV_PORT; + cpu_to_be16s(&rxudp); + } + ew32(RXUDP, rxudp); + + e1e_flush(); + + /* Clear TSYNCRXCTL_VALID & TSYNCTXCTL_VALID bit */ + er32(RXSTMPH); + er32(TXSTMPH); + + /* Get and set the System Time Register SYSTIM base frequency */ + ret_val = e1000e_get_base_timinca(adapter, ®val); + if (ret_val) + return ret_val; + ew32(TIMINCA, regval); + + /* reset the ns time counter */ + timecounter_init(&adapter->tc, &adapter->cc, + ktime_to_ns(ktime_get_real())); + + return 0; +} + +/** * e1000_configure - configure the hardware for Rx and Tx * @adapter: private board structure **/ @@ -3473,14 +3827,17 @@ void e1000e_reset(struct e1000_adapter *adapter) break; case e1000_pch2lan: case e1000_pch_lpt: - fc->high_water = 0x05C20; - fc->low_water = 0x05048; - fc->pause_time = 0x0650; fc->refresh_time = 0x0400; - if (adapter->netdev->mtu > ETH_DATA_LEN) { - pba = 14; - ew32(PBA, pba); + + if (adapter->netdev->mtu <= ETH_DATA_LEN) { + fc->high_water = 0x05C20; + fc->low_water = 0x05048; + fc->pause_time = 0x0650; + break; } + + fc->high_water = ((pba << 10) * 9 / 10) & E1000_FCRTH_RTH; + fc->low_water = ((pba << 10) * 8 / 10) & E1000_FCRTL_RTL; break; } @@ -3533,6 +3890,9 @@ void e1000e_reset(struct e1000_adapter *adapter) e1000e_reset_adaptive(hw); + /* initialize systim and reset the ns time counter */ + e1000e_config_hwtstamp(adapter); + if (!netif_running(adapter->netdev) && !test_bit(__E1000_TESTING, &adapter->state)) { e1000_power_down_phy(adapter); @@ -3669,6 +4029,24 @@ void e1000e_reinit_locked(struct e1000_adapter *adapter) } /** + * e1000e_cyclecounter_read - read raw cycle counter (used by time counter) + * @cc: cyclecounter structure + **/ +static cycle_t e1000e_cyclecounter_read(const struct cyclecounter *cc) +{ + struct e1000_adapter *adapter = container_of(cc, struct e1000_adapter, + cc); + struct e1000_hw *hw = &adapter->hw; + cycle_t systim; + + /* latch SYSTIMH on read of SYSTIML */ + systim = (cycle_t)er32(SYSTIML); + systim |= (cycle_t)er32(SYSTIMH) << 32; + + return systim; +} + +/** * e1000_sw_init - Initialize general software structures (struct e1000_adapter) * @adapter: board private structure to initialize * @@ -3694,6 +4072,17 @@ static int e1000_sw_init(struct e1000_adapter *adapter) if (e1000_alloc_queues(adapter)) return -ENOMEM; + /* Setup hardware time stamping cyclecounter */ + if (adapter->flags & FLAG_HAS_HW_TIMESTAMP) { + adapter->cc.read = e1000e_cyclecounter_read; + adapter->cc.mask = CLOCKSOURCE_MASK(64); + adapter->cc.mult = 1; + /* cc.shift set in e1000e_get_base_tininca() */ + + spin_lock_init(&adapter->systim_lock); + INIT_WORK(&adapter->tx_hwtstamp_work, e1000e_tx_hwtstamp_work); + } + /* Explicitly disable IRQ since the NIC can be in any state. */ e1000_irq_disable(adapter); @@ -3706,7 +4095,7 @@ static int e1000_sw_init(struct e1000_adapter *adapter) * @irq: interrupt number * @data: pointer to a network interface device structure **/ -static irqreturn_t e1000_intr_msi_test(int irq, void *data) +static irqreturn_t e1000_intr_msi_test(int __always_unused irq, void *data) { struct net_device *netdev = data; struct e1000_adapter *adapter = netdev_priv(netdev); @@ -3877,10 +4266,8 @@ static int e1000_open(struct net_device *netdev) e1000_update_mng_vlan(adapter); /* DMA latency requirement to workaround jumbo issue */ - if (adapter->hw.mac.type == e1000_pch2lan) - pm_qos_add_request(&adapter->netdev->pm_qos_req, - PM_QOS_CPU_DMA_LATENCY, - PM_QOS_DEFAULT_VALUE); + pm_qos_add_request(&adapter->netdev->pm_qos_req, PM_QOS_CPU_DMA_LATENCY, + PM_QOS_DEFAULT_VALUE); /* before we allocate an interrupt, we must be ready to handle it. * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt @@ -3988,8 +4375,7 @@ static int e1000_close(struct net_device *netdev) !test_bit(__E1000_TESTING, &adapter->state)) e1000e_release_hw_control(adapter); - if (adapter->hw.mac.type == e1000_pch2lan) - pm_qos_remove_request(&adapter->netdev->pm_qos_req); + pm_qos_remove_request(&adapter->netdev->pm_qos_req); pm_runtime_put_sync(&pdev->dev); @@ -4251,6 +4637,16 @@ static void e1000e_update_stats(struct e1000_adapter *adapter) adapter->stats.mgptc += er32(MGTPTC); adapter->stats.mgprc += er32(MGTPRC); adapter->stats.mgpdc += er32(MGTPDC); + + /* Correctable ECC Errors */ + if (hw->mac.type == e1000_pch_lpt) { + u32 pbeccsts = er32(PBECCSTS); + adapter->corr_errors += + pbeccsts & E1000_PBECCSTS_CORR_ERR_CNT_MASK; + adapter->uncorr_errors += + (pbeccsts & E1000_PBECCSTS_UNCORR_ERR_CNT_MASK) >> + E1000_PBECCSTS_UNCORR_ERR_CNT_SHIFT; + } } /** @@ -4266,14 +4662,14 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter) (adapter->hw.phy.media_type == e1000_media_type_copper)) { int ret_val; - ret_val = e1e_rphy(hw, PHY_CONTROL, &phy->bmcr); - ret_val |= e1e_rphy(hw, PHY_STATUS, &phy->bmsr); - ret_val |= e1e_rphy(hw, PHY_AUTONEG_ADV, &phy->advertise); - ret_val |= e1e_rphy(hw, PHY_LP_ABILITY, &phy->lpa); - ret_val |= e1e_rphy(hw, PHY_AUTONEG_EXP, &phy->expansion); - ret_val |= e1e_rphy(hw, PHY_1000T_CTRL, &phy->ctrl1000); - ret_val |= e1e_rphy(hw, PHY_1000T_STATUS, &phy->stat1000); - ret_val |= e1e_rphy(hw, PHY_EXT_STATUS, &phy->estatus); + ret_val = e1e_rphy(hw, MII_BMCR, &phy->bmcr); + ret_val |= e1e_rphy(hw, MII_BMSR, &phy->bmsr); + ret_val |= e1e_rphy(hw, MII_ADVERTISE, &phy->advertise); + ret_val |= e1e_rphy(hw, MII_LPA, &phy->lpa); + ret_val |= e1e_rphy(hw, MII_EXPANSION, &phy->expansion); + ret_val |= e1e_rphy(hw, MII_CTRL1000, &phy->ctrl1000); + ret_val |= e1e_rphy(hw, MII_STAT1000, &phy->stat1000); + ret_val |= e1e_rphy(hw, MII_ESTATUS, &phy->estatus); if (ret_val) e_warn("Error reading PHY register\n"); } else { @@ -4300,9 +4696,8 @@ static void e1000_print_link_info(struct e1000_adapter *adapter) u32 ctrl = er32(CTRL); /* Link status message must follow this format for user tools */ - printk(KERN_INFO "e1000e: %s NIC Link is Up %d Mbps %s Duplex, Flow Control: %s\n", - adapter->netdev->name, - adapter->link_speed, + pr_info("%s NIC Link is Up %d Mbps %s Duplex, Flow Control: %s\n", + adapter->netdev->name, adapter->link_speed, adapter->link_duplex == FULL_DUPLEX ? "Full" : "Half", (ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE) ? "Rx/Tx" : (ctrl & E1000_CTRL_RFCE) ? "Rx" : @@ -4355,11 +4750,11 @@ static void e1000e_enable_receives(struct e1000_adapter *adapter) { /* make sure the receive unit is started */ if ((adapter->flags & FLAG_RX_NEEDS_RESTART) && - (adapter->flags & FLAG_RX_RESTART_NOW)) { + (adapter->flags & FLAG_RESTART_NOW)) { struct e1000_hw *hw = &adapter->hw; u32 rctl = er32(RCTL); ew32(RCTL, rctl | E1000_RCTL_EN); - adapter->flags &= ~FLAG_RX_RESTART_NOW; + adapter->flags &= ~FLAG_RESTART_NOW; } } @@ -4435,6 +4830,13 @@ static void e1000_watchdog_task(struct work_struct *work) &adapter->link_speed, &adapter->link_duplex); e1000_print_link_info(adapter); + + /* check if SmartSpeed worked */ + e1000e_check_downshift(hw); + if (phy->speed_downgraded) + netdev_warn(netdev, + "Link Speed was downgraded by SmartSpeed\n"); + /* On supported PHYs, check for duplex mismatch only * if link has autonegotiated at 10/100 half */ @@ -4446,9 +4848,9 @@ static void e1000_watchdog_task(struct work_struct *work) (adapter->link_duplex == HALF_DUPLEX)) { u16 autoneg_exp; - e1e_rphy(hw, PHY_AUTONEG_EXP, &autoneg_exp); + e1e_rphy(hw, MII_EXPANSION, &autoneg_exp); - if (!(autoneg_exp & NWAY_ER_LP_NWAY_CAPS)) + if (!(autoneg_exp & EXPANSION_NWAY)) e_info("Autonegotiated half duplex but link partner cannot autoneg. Try forcing full duplex if link gets many collisions.\n"); } @@ -4521,15 +4923,22 @@ static void e1000_watchdog_task(struct work_struct *work) adapter->link_speed = 0; adapter->link_duplex = 0; /* Link status message must follow this format */ - printk(KERN_INFO "e1000e: %s NIC Link is Down\n", - adapter->netdev->name); + pr_info("%s NIC Link is Down\n", adapter->netdev->name); netif_carrier_off(netdev); if (!test_bit(__E1000_DOWN, &adapter->state)) mod_timer(&adapter->phy_info_timer, round_jiffies(jiffies + 2 * HZ)); - if (adapter->flags & FLAG_RX_NEEDS_RESTART) - schedule_work(&adapter->reset_task); + /* The link is lost so the controller stops DMA. + * If there is queued Tx work that cannot be done + * or if on an 8000ES2LAN which requires a Rx packet + * buffer work-around on link down event, reset the + * controller to flush the Tx/Rx packet buffers. + * (Do the reset outside of interrupt context). + */ + if ((adapter->flags & FLAG_RX_NEEDS_RESTART) || + (e1000_desc_unused(tx_ring) + 1 < tx_ring->count)) + adapter->flags |= FLAG_RESTART_NOW; else pm_schedule_suspend(netdev->dev.parent, LINK_TIMEOUT); @@ -4551,20 +4960,14 @@ link_up: adapter->gotc_old = adapter->stats.gotc; spin_unlock(&adapter->stats64_lock); - e1000e_update_adaptive(&adapter->hw); - - if (!netif_carrier_ok(netdev) && - (e1000_desc_unused(tx_ring) + 1 < tx_ring->count)) { - /* We've lost link, so the controller stops DMA, - * but we've got queued Tx work that's never going - * to get done, so reset controller to flush Tx. - * (Do the reset outside of interrupt context). - */ + if (adapter->flags & FLAG_RESTART_NOW) { schedule_work(&adapter->reset_task); /* return immediately since reset is imminent */ return; } + e1000e_update_adaptive(&adapter->hw); + /* Simple mode for Interrupt Throttle Rate (ITR) */ if (adapter->itr_setting == 4) { /* Symmetric Tx/Rx gets a reduced ITR=2000; @@ -4601,6 +5004,17 @@ link_up: if (adapter->flags2 & FLAG2_CHECK_PHY_HANG) e1000e_check_82574_phy_workaround(adapter); + /* Clear valid timestamp stuck in RXSTMPL/H due to a Rx error */ + if (adapter->hwtstamp_config.rx_filter != HWTSTAMP_FILTER_NONE) { + if ((adapter->flags2 & FLAG2_CHECK_RX_HWTSTAMP) && + (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_VALID)) { + er32(RXSTMPH); + adapter->rx_hwtstamp_cleared++; + } else { + adapter->flags2 |= FLAG2_CHECK_RX_HWTSTAMP; + } + } + /* Reset the timer */ if (!test_bit(__E1000_DOWN, &adapter->state)) mod_timer(&adapter->watchdog_timer, @@ -4612,6 +5026,7 @@ link_up: #define E1000_TX_FLAGS_TSO 0x00000004 #define E1000_TX_FLAGS_IPV4 0x00000008 #define E1000_TX_FLAGS_NO_FCS 0x00000010 +#define E1000_TX_FLAGS_HWTSTAMP 0x00000020 #define E1000_TX_FLAGS_VLAN_MASK 0xffff0000 #define E1000_TX_FLAGS_VLAN_SHIFT 16 @@ -4870,6 +5285,11 @@ static void e1000_tx_queue(struct e1000_ring *tx_ring, int tx_flags, int count) if (unlikely(tx_flags & E1000_TX_FLAGS_NO_FCS)) txd_lower &= ~(E1000_TXD_CMD_IFCS); + if (unlikely(tx_flags & E1000_TX_FLAGS_HWTSTAMP)) { + txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D; + txd_upper |= E1000_TXD_EXTCMD_TSTAMP; + } + i = tx_ring->next_to_use; do { @@ -4918,12 +5338,11 @@ static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter, struct e1000_hw *hw = &adapter->hw; u16 length, offset; - if (vlan_tx_tag_present(skb)) { - if (!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) && - (adapter->hw.mng_cookie.status & - E1000_MNG_DHCP_COOKIE_STATUS_VLAN))) - return 0; - } + if (vlan_tx_tag_present(skb) && + !((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) && + (adapter->hw.mng_cookie.status & + E1000_MNG_DHCP_COOKIE_STATUS_VLAN))) + return 0; if (skb->len <= MINIMUM_DHCP_PACKET_SIZE) return 0; @@ -5094,7 +5513,15 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, count = e1000_tx_map(tx_ring, skb, first, adapter->tx_fifo_limit, nr_frags); if (count) { - skb_tx_timestamp(skb); + if (unlikely((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) && + !adapter->tx_hwtstamp_skb)) { + skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; + tx_flags |= E1000_TX_FLAGS_HWTSTAMP; + adapter->tx_hwtstamp_skb = skb_get(skb); + schedule_work(&adapter->tx_hwtstamp_work); + } else { + skb_tx_timestamp(skb); + } netdev_sent_queue(netdev, skb->len); e1000_tx_queue(tx_ring, tx_flags, count); @@ -5134,10 +5561,9 @@ static void e1000_reset_task(struct work_struct *work) if (test_bit(__E1000_DOWN, &adapter->state)) return; - if (!((adapter->flags & FLAG_RX_NEEDS_RESTART) && - (adapter->flags & FLAG_RX_RESTART_NOW))) { + if (!(adapter->flags & FLAG_RESTART_NOW)) { e1000e_dump(adapter); - e_err("Reset adapter\n"); + e_err("Reset adapter unexpectedly\n"); } e1000e_reinit_locked(adapter); } @@ -5323,6 +5749,61 @@ static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, return 0; } +/** + * e1000e_hwtstamp_ioctl - control hardware time stamping + * @netdev: network interface device structure + * @ifreq: interface request + * + * Outgoing time stamping can be enabled and disabled. Play nice and + * disable it when requested, although it shouldn't cause any overhead + * when no packet needs it. At most one packet in the queue may be + * marked for time stamping, otherwise it would be impossible to tell + * for sure to which packet the hardware time stamp belongs. + * + * Incoming time stamping has to be configured via the hardware filters. + * Not all combinations are supported, in particular event type has to be + * specified. Matching the kind of event packet is not supported, with the + * exception of "all V2 events regardless of level 2 or 4". + **/ +static int e1000e_hwtstamp_ioctl(struct net_device *netdev, struct ifreq *ifr) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct hwtstamp_config config; + int ret_val; + + if (copy_from_user(&config, ifr->ifr_data, sizeof(config))) + return -EFAULT; + + adapter->hwtstamp_config = config; + + ret_val = e1000e_config_hwtstamp(adapter); + if (ret_val) + return ret_val; + + config = adapter->hwtstamp_config; + + switch (config.rx_filter) { + case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: + case HWTSTAMP_FILTER_PTP_V2_L2_SYNC: + case HWTSTAMP_FILTER_PTP_V2_SYNC: + case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ: + case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ: + case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ: + /* With V2 type filters which specify a Sync or Delay Request, + * Path Delay Request/Response messages are also time stamped + * by hardware so notify the caller the requested packets plus + * some others are time stamped. + */ + config.rx_filter = HWTSTAMP_FILTER_SOME; + break; + default: + break; + } + + return copy_to_user(ifr->ifr_data, &config, + sizeof(config)) ? -EFAULT : 0; +} + static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) { switch (cmd) { @@ -5330,6 +5811,8 @@ static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) case SIOCGMIIREG: case SIOCSMIIREG: return e1000_mii_ioctl(netdev, ifr, cmd); + case SIOCSHWTSTAMP: + return e1000e_hwtstamp_ioctl(netdev, ifr); default: return -EOPNOTSUPP; } @@ -5340,7 +5823,7 @@ static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc) struct e1000_hw *hw = &adapter->hw; u32 i, mac_reg; u16 phy_reg, wuc_enable; - int retval = 0; + int retval; /* copy MAC RARs to PHY RARs */ e1000_copy_rx_addrs_to_phy_ich8lan(hw); @@ -5554,14 +6037,21 @@ static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state) #else static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state) { + u16 aspm_ctl = 0; + + if (state & PCIE_LINK_STATE_L0S) + aspm_ctl |= PCI_EXP_LNKCTL_ASPM_L0S; + if (state & PCIE_LINK_STATE_L1) + aspm_ctl |= PCI_EXP_LNKCTL_ASPM_L1; + /* Both device and parent should have the same ASPM setting. * Disable ASPM in downstream component first and then upstream. */ - pcie_capability_clear_word(pdev, PCI_EXP_LNKCTL, state); + pcie_capability_clear_word(pdev, PCI_EXP_LNKCTL, aspm_ctl); if (pdev->bus->self) pcie_capability_clear_word(pdev->bus->self, PCI_EXP_LNKCTL, - state); + aspm_ctl); } #endif static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state) @@ -5746,7 +6236,7 @@ static void e1000_shutdown(struct pci_dev *pdev) #ifdef CONFIG_NET_POLL_CONTROLLER -static irqreturn_t e1000_intr_msix(int irq, void *data) +static irqreturn_t e1000_intr_msix(int __always_unused irq, void *data) { struct net_device *netdev = data; struct e1000_adapter *adapter = netdev_priv(netdev); @@ -5910,7 +6400,6 @@ static void e1000_io_resume(struct pci_dev *pdev) */ if (!(adapter->flags & FLAG_HAS_AMT)) e1000e_get_hw_control(adapter); - } static void e1000_print_device_info(struct e1000_adapter *adapter) @@ -6068,8 +6557,8 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } err = pci_request_selected_regions_exclusive(pdev, - pci_select_bars(pdev, IORESOURCE_MEM), - e1000e_driver_name); + pci_select_bars(pdev, IORESOURCE_MEM), + e1000e_driver_name); if (err) goto err_pci_reg; @@ -6228,11 +6717,10 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) "NVM Read Error while reading MAC address\n"); memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len); - memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len); - if (!is_valid_ether_addr(netdev->perm_addr)) { + if (!is_valid_ether_addr(netdev->dev_addr)) { dev_err(&pdev->dev, "Invalid MAC Address: %pM\n", - netdev->perm_addr); + netdev->dev_addr); err = -EIO; goto err_eeprom; } @@ -6318,6 +6806,9 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* carrier off reporting is important to ethtool even BEFORE open */ netif_carrier_off(netdev); + /* init PTP hardware clock */ + e1000e_ptp_init(adapter); + e1000_print_device_info(adapter); if (pci_dev_run_wake(pdev)) @@ -6366,6 +6857,8 @@ static void e1000_remove(struct pci_dev *pdev) struct e1000_adapter *adapter = netdev_priv(netdev); bool down = test_bit(__E1000_DOWN, &adapter->state); + e1000e_ptp_remove(adapter); + /* The timers may be rescheduled, so explicitly disable them * from being rescheduled. */ @@ -6380,6 +6873,14 @@ static void e1000_remove(struct pci_dev *pdev) cancel_work_sync(&adapter->update_phy_task); cancel_work_sync(&adapter->print_hang_task); + if (adapter->flags & FLAG_HAS_HW_TIMESTAMP) { + cancel_work_sync(&adapter->tx_hwtstamp_work); + if (adapter->tx_hwtstamp_skb) { + dev_kfree_skb_any(adapter->tx_hwtstamp_skb); + adapter->tx_hwtstamp_skb = NULL; + } + } + if (!(netdev->flags & IFF_UP)) e1000_power_down_phy(adapter); @@ -6532,7 +7033,7 @@ static int __init e1000_init_module(void) int ret; pr_info("Intel(R) PRO/1000 Network Driver - %s\n", e1000e_driver_version); - pr_info("Copyright(c) 1999 - 2012 Intel Corporation.\n"); + pr_info("Copyright(c) 1999 - 2013 Intel Corporation.\n"); ret = pci_register_driver(&e1000_driver); return ret; diff --git a/drivers/net/ethernet/intel/e1000e/nvm.c b/drivers/net/ethernet/intel/e1000e/nvm.c index b6468804cb2..84fecc26816 100644 --- a/drivers/net/ethernet/intel/e1000e/nvm.c +++ b/drivers/net/ethernet/intel/e1000e/nvm.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -359,7 +359,7 @@ s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) { struct e1000_nvm_info *nvm = &hw->nvm; - s32 ret_val; + s32 ret_val = -E1000_ERR_NVM; u16 widx = 0; /* A check for invalid values: offset too large, too many words, @@ -371,16 +371,18 @@ s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) return -E1000_ERR_NVM; } - ret_val = nvm->ops.acquire(hw); - if (ret_val) - return ret_val; - while (widx < words) { u8 write_opcode = NVM_WRITE_OPCODE_SPI; - ret_val = e1000_ready_nvm_eeprom(hw); + ret_val = nvm->ops.acquire(hw); if (ret_val) - goto release; + return ret_val; + + ret_val = e1000_ready_nvm_eeprom(hw); + if (ret_val) { + nvm->ops.release(hw); + return ret_val; + } e1000_standby_nvm(hw); @@ -413,12 +415,10 @@ s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) break; } } + usleep_range(10000, 20000); + nvm->ops.release(hw); } - usleep_range(10000, 20000); -release: - nvm->ops.release(hw); - return ret_val; } @@ -464,8 +464,8 @@ s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num, if (nvm_data != NVM_PBA_PTR_GUARD) { e_dbg("NVM PBA number is not stored as string\n"); - /* we will need 11 characters to store the PBA */ - if (pba_num_size < 11) { + /* make sure callers buffer is big enough to store the PBA */ + if (pba_num_size < E1000_PBANUM_LENGTH) { e_dbg("PBA string buffer too small\n"); return E1000_ERR_NO_SPACE; } diff --git a/drivers/net/ethernet/intel/e1000e/nvm.h b/drivers/net/ethernet/intel/e1000e/nvm.h new file mode 100644 index 00000000000..45fc6956162 --- /dev/null +++ b/drivers/net/ethernet/intel/e1000e/nvm.h @@ -0,0 +1,47 @@ +/******************************************************************************* + + Intel PRO/1000 Linux driver + Copyright(c) 1999 - 2013 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000E_NVM_H_ +#define _E1000E_NVM_H_ + +s32 e1000e_acquire_nvm(struct e1000_hw *hw); + +s32 e1000e_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg); +s32 e1000_read_mac_addr_generic(struct e1000_hw *hw); +s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num, + u32 pba_num_size); +s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); +s32 e1000e_valid_led_default(struct e1000_hw *hw, u16 *data); +s32 e1000e_validate_nvm_checksum_generic(struct e1000_hw *hw); +s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); +s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw); +void e1000e_release_nvm(struct e1000_hw *hw); + +#define E1000_STM_OPCODE 0xDB00 + +#endif diff --git a/drivers/net/ethernet/intel/e1000e/param.c b/drivers/net/ethernet/intel/e1000e/param.c index 89d536dd7ff..98da75dff93 100644 --- a/drivers/net/ethernet/intel/e1000e/param.c +++ b/drivers/net/ethernet/intel/e1000e/param.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -53,8 +53,7 @@ MODULE_PARM_DESC(copybreak, */ #define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET } #define E1000_PARAM(X, desc) \ - static int X[E1000_MAX_NIC+1] \ - = E1000_PARAM_INIT; \ + static int X[E1000_MAX_NIC+1] = E1000_PARAM_INIT; \ static unsigned int num_##X; \ module_param_array_named(X, X, int, &num_##X, 0); \ MODULE_PARM_DESC(X, desc); @@ -447,8 +446,7 @@ void e1000e_check_options(struct e1000_adapter *adapter) if (num_SmartPowerDownEnable > bd) { unsigned int spd = SmartPowerDownEnable[bd]; e1000_validate_option(&spd, &opt, adapter); - if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN) - && spd) + if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN) && spd) adapter->flags |= FLAG_SMART_POWER_DOWN; } } diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c index 28b38ff37e8..0930c136aa3 100644 --- a/drivers/net/ethernet/intel/e1000e/phy.c +++ b/drivers/net/ethernet/intel/e1000e/phy.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -28,16 +28,12 @@ #include "e1000.h" -static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw); -static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw); -static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active); static s32 e1000_wait_autoneg(struct e1000_hw *hw); -static u32 e1000_get_phy_addr_for_bm_page(u32 page, u32 reg); static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data, bool read, bool page_set); static u32 e1000_get_phy_addr_for_hv_page(u32 page); static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset, - u16 *data, bool read); + u16 *data, bool read); /* Cable length tables */ static const u16 e1000_m88_cable_length_table[] = { @@ -57,48 +53,6 @@ static const u16 e1000_igp_2_cable_length_table[] = { #define IGP02E1000_CABLE_LENGTH_TABLE_SIZE \ ARRAY_SIZE(e1000_igp_2_cable_length_table) -#define BM_PHY_REG_PAGE(offset) \ - ((u16)(((offset) >> PHY_PAGE_SHIFT) & 0xFFFF)) -#define BM_PHY_REG_NUM(offset) \ - ((u16)(((offset) & MAX_PHY_REG_ADDRESS) |\ - (((offset) >> (PHY_UPPER_SHIFT - PHY_PAGE_SHIFT)) &\ - ~MAX_PHY_REG_ADDRESS))) - -#define HV_INTC_FC_PAGE_START 768 -#define I82578_ADDR_REG 29 -#define I82577_ADDR_REG 16 -#define I82577_CFG_REG 22 -#define I82577_CFG_ASSERT_CRS_ON_TX (1 << 15) -#define I82577_CFG_ENABLE_DOWNSHIFT (3 << 10) /* auto downshift 100/10 */ -#define I82577_CTRL_REG 23 - -/* 82577 specific PHY registers */ -#define I82577_PHY_CTRL_2 18 -#define I82577_PHY_STATUS_2 26 -#define I82577_PHY_DIAG_STATUS 31 - -/* I82577 PHY Status 2 */ -#define I82577_PHY_STATUS2_REV_POLARITY 0x0400 -#define I82577_PHY_STATUS2_MDIX 0x0800 -#define I82577_PHY_STATUS2_SPEED_MASK 0x0300 -#define I82577_PHY_STATUS2_SPEED_1000MBPS 0x0200 - -/* I82577 PHY Control 2 */ -#define I82577_PHY_CTRL2_MANUAL_MDIX 0x0200 -#define I82577_PHY_CTRL2_AUTO_MDI_MDIX 0x0400 -#define I82577_PHY_CTRL2_MDIX_CFG_MASK 0x0600 - -/* I82577 PHY Diagnostics Status */ -#define I82577_DSTATUS_CABLE_LENGTH 0x03FC -#define I82577_DSTATUS_CABLE_LENGTH_SHIFT 2 - -/* BM PHY Copper Specific Control 1 */ -#define BM_CS_CTRL1 16 - -#define HV_MUX_DATA_CTRL PHY_REG(776, 16) -#define HV_MUX_DATA_CTRL_GEN_TO_MAC 0x0400 -#define HV_MUX_DATA_CTRL_FORCE_SPEED 0x0004 - /** * e1000e_check_reset_block_generic - Check if PHY reset is blocked * @hw: pointer to the HW structure @@ -135,13 +89,13 @@ s32 e1000e_get_phy_id(struct e1000_hw *hw) return 0; while (retry_count < 2) { - ret_val = e1e_rphy(hw, PHY_ID1, &phy_id); + ret_val = e1e_rphy(hw, MII_PHYSID1, &phy_id); if (ret_val) return ret_val; phy->id = (u32)(phy_id << 16); udelay(20); - ret_val = e1e_rphy(hw, PHY_ID2, &phy_id); + ret_val = e1e_rphy(hw, MII_PHYSID2, &phy_id); if (ret_val) return ret_val; @@ -645,31 +599,31 @@ static s32 e1000_set_master_slave_mode(struct e1000_hw *hw) u16 phy_data; /* Resolve Master/Slave mode */ - ret_val = e1e_rphy(hw, PHY_1000T_CTRL, &phy_data); + ret_val = e1e_rphy(hw, MII_CTRL1000, &phy_data); if (ret_val) return ret_val; /* load defaults for future use */ - hw->phy.original_ms_type = (phy_data & CR_1000T_MS_ENABLE) ? - ((phy_data & CR_1000T_MS_VALUE) ? + hw->phy.original_ms_type = (phy_data & CTL1000_ENABLE_MASTER) ? + ((phy_data & CTL1000_AS_MASTER) ? e1000_ms_force_master : e1000_ms_force_slave) : e1000_ms_auto; switch (hw->phy.ms_type) { case e1000_ms_force_master: - phy_data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE); + phy_data |= (CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER); break; case e1000_ms_force_slave: - phy_data |= CR_1000T_MS_ENABLE; - phy_data &= ~(CR_1000T_MS_VALUE); + phy_data |= CTL1000_ENABLE_MASTER; + phy_data &= ~(CTL1000_AS_MASTER); break; case e1000_ms_auto: - phy_data &= ~CR_1000T_MS_ENABLE; + phy_data &= ~CTL1000_ENABLE_MASTER; /* fall-through */ default: break; } - return e1e_wphy(hw, PHY_1000T_CTRL, phy_data); + return e1e_wphy(hw, MII_CTRL1000, phy_data); } /** @@ -792,7 +746,7 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw) if (ret_val) return ret_val; /* Commit the changes. */ - ret_val = e1000e_commit_phy(hw); + ret_val = phy->ops.commit(hw); if (ret_val) { e_dbg("Error committing the PHY changes\n"); return ret_val; @@ -848,10 +802,12 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw) } /* Commit the changes. */ - ret_val = e1000e_commit_phy(hw); - if (ret_val) { - e_dbg("Error committing the PHY changes\n"); - return ret_val; + if (phy->ops.commit) { + ret_val = phy->ops.commit(hw); + if (ret_val) { + e_dbg("Error committing the PHY changes\n"); + return ret_val; + } } if (phy->type == e1000_phy_82578) { @@ -895,10 +851,12 @@ s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw) msleep(100); /* disable lplu d0 during driver init */ - ret_val = e1000_set_d0_lplu_state(hw, false); - if (ret_val) { - e_dbg("Error Disabling LPLU D0\n"); - return ret_val; + if (hw->phy.ops.set_d0_lplu_state) { + ret_val = hw->phy.ops.set_d0_lplu_state(hw, false); + if (ret_val) { + e_dbg("Error Disabling LPLU D0\n"); + return ret_val; + } } /* Configure mdi-mdix settings */ ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CTRL, &data); @@ -943,12 +901,12 @@ s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw) return ret_val; /* Set auto Master/Slave resolution process */ - ret_val = e1e_rphy(hw, PHY_1000T_CTRL, &data); + ret_val = e1e_rphy(hw, MII_CTRL1000, &data); if (ret_val) return ret_val; - data &= ~CR_1000T_MS_ENABLE; - ret_val = e1e_wphy(hw, PHY_1000T_CTRL, data); + data &= ~CTL1000_ENABLE_MASTER; + ret_val = e1e_wphy(hw, MII_CTRL1000, data); if (ret_val) return ret_val; } @@ -978,13 +936,13 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) phy->autoneg_advertised &= phy->autoneg_mask; /* Read the MII Auto-Neg Advertisement Register (Address 4). */ - ret_val = e1e_rphy(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg); + ret_val = e1e_rphy(hw, MII_ADVERTISE, &mii_autoneg_adv_reg); if (ret_val) return ret_val; if (phy->autoneg_mask & ADVERTISE_1000_FULL) { /* Read the MII 1000Base-T Control Register (Address 9). */ - ret_val = e1e_rphy(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg); + ret_val = e1e_rphy(hw, MII_CTRL1000, &mii_1000t_ctrl_reg); if (ret_val) return ret_val; } @@ -1000,36 +958,35 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) * Advertisement Register (Address 4) and the 1000 mb speed bits in * the 1000Base-T Control Register (Address 9). */ - mii_autoneg_adv_reg &= ~(NWAY_AR_100TX_FD_CAPS | - NWAY_AR_100TX_HD_CAPS | - NWAY_AR_10T_FD_CAPS | - NWAY_AR_10T_HD_CAPS); - mii_1000t_ctrl_reg &= ~(CR_1000T_HD_CAPS | CR_1000T_FD_CAPS); + mii_autoneg_adv_reg &= ~(ADVERTISE_100FULL | + ADVERTISE_100HALF | + ADVERTISE_10FULL | ADVERTISE_10HALF); + mii_1000t_ctrl_reg &= ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL); e_dbg("autoneg_advertised %x\n", phy->autoneg_advertised); /* Do we want to advertise 10 Mb Half Duplex? */ if (phy->autoneg_advertised & ADVERTISE_10_HALF) { e_dbg("Advertise 10mb Half duplex\n"); - mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS; + mii_autoneg_adv_reg |= ADVERTISE_10HALF; } /* Do we want to advertise 10 Mb Full Duplex? */ if (phy->autoneg_advertised & ADVERTISE_10_FULL) { e_dbg("Advertise 10mb Full duplex\n"); - mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS; + mii_autoneg_adv_reg |= ADVERTISE_10FULL; } /* Do we want to advertise 100 Mb Half Duplex? */ if (phy->autoneg_advertised & ADVERTISE_100_HALF) { e_dbg("Advertise 100mb Half duplex\n"); - mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS; + mii_autoneg_adv_reg |= ADVERTISE_100HALF; } /* Do we want to advertise 100 Mb Full Duplex? */ if (phy->autoneg_advertised & ADVERTISE_100_FULL) { e_dbg("Advertise 100mb Full duplex\n"); - mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS; + mii_autoneg_adv_reg |= ADVERTISE_100FULL; } /* We do not allow the Phy to advertise 1000 Mb Half Duplex */ @@ -1039,14 +996,14 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) /* Do we want to advertise 1000 Mb Full Duplex? */ if (phy->autoneg_advertised & ADVERTISE_1000_FULL) { e_dbg("Advertise 1000mb Full duplex\n"); - mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS; + mii_1000t_ctrl_reg |= ADVERTISE_1000FULL; } /* Check for a software override of the flow control settings, and * setup the PHY advertisement registers accordingly. If * auto-negotiation is enabled, then software will have to set the * "PAUSE" bits to the correct value in the Auto-Negotiation - * Advertisement Register (PHY_AUTONEG_ADV) and re-start auto- + * Advertisement Register (MII_ADVERTISE) and re-start auto- * negotiation. * * The possible values of the "fc" parameter are: @@ -1064,7 +1021,8 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) /* Flow control (Rx & Tx) is completely disabled by a * software over-ride. */ - mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); + mii_autoneg_adv_reg &= + ~(ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP); break; case e1000_fc_rx_pause: /* Rx Flow control is enabled, and Tx Flow control is @@ -1076,34 +1034,36 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) * (in e1000e_config_fc_after_link_up) we will disable the * hw's ability to send PAUSE frames. */ - mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); + mii_autoneg_adv_reg |= + (ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP); break; case e1000_fc_tx_pause: /* Tx Flow control is enabled, and Rx Flow control is * disabled, by a software over-ride. */ - mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR; - mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE; + mii_autoneg_adv_reg |= ADVERTISE_PAUSE_ASYM; + mii_autoneg_adv_reg &= ~ADVERTISE_PAUSE_CAP; break; case e1000_fc_full: /* Flow control (both Rx and Tx) is enabled by a software * over-ride. */ - mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); + mii_autoneg_adv_reg |= + (ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP); break; default: e_dbg("Flow control param set incorrectly\n"); return -E1000_ERR_CONFIG; } - ret_val = e1e_wphy(hw, PHY_AUTONEG_ADV, mii_autoneg_adv_reg); + ret_val = e1e_wphy(hw, MII_ADVERTISE, mii_autoneg_adv_reg); if (ret_val) return ret_val; e_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg); if (phy->autoneg_mask & ADVERTISE_1000_FULL) - ret_val = e1e_wphy(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg); + ret_val = e1e_wphy(hw, MII_CTRL1000, mii_1000t_ctrl_reg); return ret_val; } @@ -1145,12 +1105,12 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw) /* Restart auto-negotiation by setting the Auto Neg Enable bit and * the Auto Neg Restart bit in the PHY control register. */ - ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_ctrl); + ret_val = e1e_rphy(hw, MII_BMCR, &phy_ctrl); if (ret_val) return ret_val; - phy_ctrl |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG); - ret_val = e1e_wphy(hw, PHY_CONTROL, phy_ctrl); + phy_ctrl |= (BMCR_ANENABLE | BMCR_ANRESTART); + ret_val = e1e_wphy(hw, MII_BMCR, phy_ctrl); if (ret_val) return ret_val; @@ -1196,7 +1156,7 @@ s32 e1000e_setup_copper_link(struct e1000_hw *hw) * depending on user settings. */ e_dbg("Forcing Speed and Duplex\n"); - ret_val = e1000_phy_force_speed_duplex(hw); + ret_val = hw->phy.ops.force_speed_duplex(hw); if (ret_val) { e_dbg("Error Forcing Speed and Duplex\n"); return ret_val; @@ -1237,13 +1197,13 @@ s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw) u16 phy_data; bool link; - ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data); + ret_val = e1e_rphy(hw, MII_BMCR, &phy_data); if (ret_val) return ret_val; e1000e_phy_force_speed_duplex_setup(hw, &phy_data); - ret_val = e1e_wphy(hw, PHY_CONTROL, phy_data); + ret_val = e1e_wphy(hw, MII_BMCR, phy_data); if (ret_val) return ret_val; @@ -1315,20 +1275,22 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw) e_dbg("M88E1000 PSCR: %X\n", phy_data); - ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data); + ret_val = e1e_rphy(hw, MII_BMCR, &phy_data); if (ret_val) return ret_val; e1000e_phy_force_speed_duplex_setup(hw, &phy_data); - ret_val = e1e_wphy(hw, PHY_CONTROL, phy_data); + ret_val = e1e_wphy(hw, MII_BMCR, phy_data); if (ret_val) return ret_val; /* Reset the phy to commit changes. */ - ret_val = e1000e_commit_phy(hw); - if (ret_val) - return ret_val; + if (hw->phy.ops.commit) { + ret_val = hw->phy.ops.commit(hw); + if (ret_val) + return ret_val; + } if (phy->autoneg_wait_to_complete) { e_dbg("Waiting for forced speed/duplex link on M88 phy.\n"); @@ -1406,13 +1368,13 @@ s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw) u16 data; bool link; - ret_val = e1e_rphy(hw, PHY_CONTROL, &data); + ret_val = e1e_rphy(hw, MII_BMCR, &data); if (ret_val) return ret_val; e1000e_phy_force_speed_duplex_setup(hw, &data); - ret_val = e1e_wphy(hw, PHY_CONTROL, data); + ret_val = e1e_wphy(hw, MII_BMCR, data); if (ret_val) return ret_val; @@ -1456,13 +1418,13 @@ s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw) /** * e1000e_phy_force_speed_duplex_setup - Configure forced PHY speed/duplex * @hw: pointer to the HW structure - * @phy_ctrl: pointer to current value of PHY_CONTROL + * @phy_ctrl: pointer to current value of MII_BMCR * * Forces speed and duplex on the PHY by doing the following: disable flow * control, force speed/duplex on the MAC, disable auto speed detection, * disable auto-negotiation, configure duplex, configure speed, configure * the collision distance, write configuration to CTRL register. The - * caller must write to the PHY_CONTROL register for these settings to + * caller must write to the MII_BMCR register for these settings to * take affect. **/ void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl) @@ -1482,29 +1444,28 @@ void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl) ctrl &= ~E1000_CTRL_ASDE; /* Disable autoneg on the phy */ - *phy_ctrl &= ~MII_CR_AUTO_NEG_EN; + *phy_ctrl &= ~BMCR_ANENABLE; /* Forcing Full or Half Duplex? */ if (mac->forced_speed_duplex & E1000_ALL_HALF_DUPLEX) { ctrl &= ~E1000_CTRL_FD; - *phy_ctrl &= ~MII_CR_FULL_DUPLEX; + *phy_ctrl &= ~BMCR_FULLDPLX; e_dbg("Half Duplex\n"); } else { ctrl |= E1000_CTRL_FD; - *phy_ctrl |= MII_CR_FULL_DUPLEX; + *phy_ctrl |= BMCR_FULLDPLX; e_dbg("Full Duplex\n"); } /* Forcing 10mb or 100mb? */ if (mac->forced_speed_duplex & E1000_ALL_100_SPEED) { ctrl |= E1000_CTRL_SPD_100; - *phy_ctrl |= MII_CR_SPEED_100; - *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10); + *phy_ctrl |= BMCR_SPEED100; + *phy_ctrl &= ~BMCR_SPEED1000; e_dbg("Forcing 100mb\n"); } else { ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100); - *phy_ctrl |= MII_CR_SPEED_10; - *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100); + *phy_ctrl &= ~(BMCR_SPEED1000 | BMCR_SPEED100); e_dbg("Forcing 10mb\n"); } @@ -1745,13 +1706,13 @@ static s32 e1000_wait_autoneg(struct e1000_hw *hw) /* Break after autoneg completes or PHY_AUTO_NEG_LIMIT expires. */ for (i = PHY_AUTO_NEG_LIMIT; i > 0; i--) { - ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status); + ret_val = e1e_rphy(hw, MII_BMSR, &phy_status); if (ret_val) break; - ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status); + ret_val = e1e_rphy(hw, MII_BMSR, &phy_status); if (ret_val) break; - if (phy_status & MII_SR_AUTONEG_COMPLETE) + if (phy_status & BMSR_ANEGCOMPLETE) break; msleep(100); } @@ -1778,21 +1739,21 @@ s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations, u16 i, phy_status; for (i = 0; i < iterations; i++) { - /* Some PHYs require the PHY_STATUS register to be read + /* Some PHYs require the MII_BMSR register to be read * twice due to the link bit being sticky. No harm doing * it across the board. */ - ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status); + ret_val = e1e_rphy(hw, MII_BMSR, &phy_status); if (ret_val) /* If the first read fails, another entity may have * ownership of the resources, wait and try again to * see if they have relinquished the resources yet. */ udelay(usec_interval); - ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status); + ret_val = e1e_rphy(hw, MII_BMSR, &phy_status); if (ret_val) break; - if (phy_status & MII_SR_LINK_STATUS) + if (phy_status & BMSR_LSTATUS) break; if (usec_interval >= 1000) mdelay(usec_interval/1000); @@ -1962,21 +1923,19 @@ s32 e1000e_get_phy_info_m88(struct e1000_hw *hw) phy->is_mdix = !!(phy_data & M88E1000_PSSR_MDIX); if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) { - ret_val = e1000_get_cable_length(hw); + ret_val = hw->phy.ops.get_cable_length(hw); if (ret_val) return ret_val; - ret_val = e1e_rphy(hw, PHY_1000T_STATUS, &phy_data); + ret_val = e1e_rphy(hw, MII_STAT1000, &phy_data); if (ret_val) return ret_val; - phy->local_rx = (phy_data & SR_1000T_LOCAL_RX_STATUS) - ? e1000_1000t_rx_status_ok - : e1000_1000t_rx_status_not_ok; + phy->local_rx = (phy_data & LPA_1000LOCALRXOK) + ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; - phy->remote_rx = (phy_data & SR_1000T_REMOTE_RX_STATUS) - ? e1000_1000t_rx_status_ok - : e1000_1000t_rx_status_not_ok; + phy->remote_rx = (phy_data & LPA_1000REMRXOK) + ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; } else { /* Set values to "undefined" */ phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; @@ -2026,21 +1985,19 @@ s32 e1000e_get_phy_info_igp(struct e1000_hw *hw) if ((data & IGP01E1000_PSSR_SPEED_MASK) == IGP01E1000_PSSR_SPEED_1000MBPS) { - ret_val = e1000_get_cable_length(hw); + ret_val = phy->ops.get_cable_length(hw); if (ret_val) return ret_val; - ret_val = e1e_rphy(hw, PHY_1000T_STATUS, &data); + ret_val = e1e_rphy(hw, MII_STAT1000, &data); if (ret_val) return ret_val; - phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS) - ? e1000_1000t_rx_status_ok - : e1000_1000t_rx_status_not_ok; + phy->local_rx = (data & LPA_1000LOCALRXOK) + ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; - phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS) - ? e1000_1000t_rx_status_ok - : e1000_1000t_rx_status_not_ok; + phy->remote_rx = (data & LPA_1000REMRXOK) + ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; } else { phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; phy->local_rx = e1000_1000t_rx_status_undefined; @@ -2114,12 +2071,12 @@ s32 e1000e_phy_sw_reset(struct e1000_hw *hw) s32 ret_val; u16 phy_ctrl; - ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_ctrl); + ret_val = e1e_rphy(hw, MII_BMCR, &phy_ctrl); if (ret_val) return ret_val; - phy_ctrl |= MII_CR_RESET; - ret_val = e1e_wphy(hw, PHY_CONTROL, phy_ctrl); + phy_ctrl |= BMCR_RESET; + ret_val = e1e_wphy(hw, MII_BMCR, phy_ctrl); if (ret_val) return ret_val; @@ -2166,17 +2123,17 @@ s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw) phy->ops.release(hw); - return e1000_get_phy_cfg_done(hw); + return phy->ops.get_cfg_done(hw); } /** - * e1000e_get_cfg_done - Generic configuration done + * e1000e_get_cfg_done_generic - Generic configuration done * @hw: pointer to the HW structure * * Generic function to wait 10 milli-seconds for configuration to complete * and return success. **/ -s32 e1000e_get_cfg_done(struct e1000_hw *hw) +s32 e1000e_get_cfg_done_generic(struct e1000_hw __always_unused *hw) { mdelay(10); @@ -2266,38 +2223,6 @@ s32 e1000e_phy_init_script_igp3(struct e1000_hw *hw) return 0; } -/* Internal function pointers */ - -/** - * e1000_get_phy_cfg_done - Generic PHY configuration done - * @hw: pointer to the HW structure - * - * Return success if silicon family did not implement a family specific - * get_cfg_done function. - **/ -static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw) -{ - if (hw->phy.ops.get_cfg_done) - return hw->phy.ops.get_cfg_done(hw); - - return 0; -} - -/** - * e1000_phy_force_speed_duplex - Generic force PHY speed/duplex - * @hw: pointer to the HW structure - * - * When the silicon family has not implemented a forced speed/duplex - * function for the PHY, simply return 0. - **/ -static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw) -{ - if (hw->phy.ops.force_speed_duplex) - return hw->phy.ops.force_speed_duplex(hw); - - return 0; -} - /** * e1000e_get_phy_type_from_id - Get PHY type from id * @phy_id: phy_id read from the phy @@ -2549,7 +2474,6 @@ s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data) hw->phy.addr = 1; if (offset > MAX_PHY_MULTI_PAGE_REG) { - /* Page is shifted left, PHY expects (page x 32) */ ret_val = e1000e_write_phy_reg_mdic(hw, BM_PHY_PAGE_SELECT, page); @@ -2672,7 +2596,7 @@ s32 e1000_enable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg) **/ s32 e1000_disable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg) { - s32 ret_val = 0; + s32 ret_val; /* Select Port Control Registers page */ ret_val = e1000_set_page_igp(hw, (BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT)); @@ -2781,9 +2705,9 @@ void e1000_power_up_phy_copper(struct e1000_hw *hw) u16 mii_reg = 0; /* The PHY will retain its settings across a power down/up cycle */ - e1e_rphy(hw, PHY_CONTROL, &mii_reg); - mii_reg &= ~MII_CR_POWER_DOWN; - e1e_wphy(hw, PHY_CONTROL, mii_reg); + e1e_rphy(hw, MII_BMCR, &mii_reg); + mii_reg &= ~BMCR_PDOWN; + e1e_wphy(hw, MII_BMCR, mii_reg); } /** @@ -2799,50 +2723,13 @@ void e1000_power_down_phy_copper(struct e1000_hw *hw) u16 mii_reg = 0; /* The PHY will retain its settings across a power down/up cycle */ - e1e_rphy(hw, PHY_CONTROL, &mii_reg); - mii_reg |= MII_CR_POWER_DOWN; - e1e_wphy(hw, PHY_CONTROL, mii_reg); + e1e_rphy(hw, MII_BMCR, &mii_reg); + mii_reg |= BMCR_PDOWN; + e1e_wphy(hw, MII_BMCR, mii_reg); usleep_range(1000, 2000); } /** - * e1000e_commit_phy - Soft PHY reset - * @hw: pointer to the HW structure - * - * Performs a soft PHY reset on those that apply. This is a function pointer - * entry point called by drivers. - **/ -s32 e1000e_commit_phy(struct e1000_hw *hw) -{ - if (hw->phy.ops.commit) - return hw->phy.ops.commit(hw); - - return 0; -} - -/** - * e1000_set_d0_lplu_state - Sets low power link up state for D0 - * @hw: pointer to the HW structure - * @active: boolean used to enable/disable lplu - * - * Success returns 0, Failure returns 1 - * - * The low power link up (lplu) state is set to the power management level D0 - * and SmartSpeed is disabled when active is true, else clear lplu for D0 - * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU - * is used during Dx states where the power conservation is most important. - * During driver activity, SmartSpeed should be enabled so performance is - * maintained. This is a function pointer entry point called by drivers. - **/ -static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active) -{ - if (hw->phy.ops.set_d0_lplu_state) - return hw->phy.ops.set_d0_lplu_state(hw, active); - - return 0; -} - -/** * __e1000_read_phy_reg_hv - Read HV PHY register * @hw: pointer to the HW structure * @offset: register offset to be read @@ -3104,8 +2991,8 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset, u16 *data, bool read) { s32 ret_val; - u32 addr_reg = 0; - u32 data_reg = 0; + u32 addr_reg; + u32 data_reg; /* This takes care of the difference with desktop vs mobile phy */ addr_reg = (hw->phy.type == e1000_phy_82578) ? @@ -3154,8 +3041,8 @@ s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw) return 0; /* Do not apply workaround if in PHY loopback bit 14 set */ - e1e_rphy(hw, PHY_CONTROL, &data); - if (data & PHY_CONTROL_LB) + e1e_rphy(hw, MII_BMCR, &data); + if (data & BMCR_LOOPBACK) return 0; /* check if link is up and at 1Gbps */ @@ -3173,8 +3060,9 @@ s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw) msleep(200); /* flush the packets in the fifo buffer */ - ret_val = e1e_wphy(hw, HV_MUX_DATA_CTRL, HV_MUX_DATA_CTRL_GEN_TO_MAC | - HV_MUX_DATA_CTRL_FORCE_SPEED); + ret_val = e1e_wphy(hw, HV_MUX_DATA_CTRL, + (HV_MUX_DATA_CTRL_GEN_TO_MAC | + HV_MUX_DATA_CTRL_FORCE_SPEED)); if (ret_val) return ret_val; @@ -3218,13 +3106,13 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw) u16 phy_data; bool link; - ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data); + ret_val = e1e_rphy(hw, MII_BMCR, &phy_data); if (ret_val) return ret_val; e1000e_phy_force_speed_duplex_setup(hw, &phy_data); - ret_val = e1e_wphy(hw, PHY_CONTROL, phy_data); + ret_val = e1e_wphy(hw, MII_BMCR, phy_data); if (ret_val) return ret_val; @@ -3292,17 +3180,15 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw) if (ret_val) return ret_val; - ret_val = e1e_rphy(hw, PHY_1000T_STATUS, &data); + ret_val = e1e_rphy(hw, MII_STAT1000, &data); if (ret_val) return ret_val; - phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS) - ? e1000_1000t_rx_status_ok - : e1000_1000t_rx_status_not_ok; + phy->local_rx = (data & LPA_1000LOCALRXOK) + ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; - phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS) - ? e1000_1000t_rx_status_ok - : e1000_1000t_rx_status_not_ok; + phy->remote_rx = (data & LPA_1000REMRXOK) + ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; } else { phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; phy->local_rx = e1000_1000t_rx_status_undefined; @@ -3333,7 +3219,7 @@ s32 e1000_get_cable_length_82577(struct e1000_hw *hw) I82577_DSTATUS_CABLE_LENGTH_SHIFT; if (length == E1000_CABLE_LENGTH_UNDEFINED) - ret_val = -E1000_ERR_PHY; + return -E1000_ERR_PHY; phy->cable_length = length; diff --git a/drivers/net/ethernet/intel/e1000e/phy.h b/drivers/net/ethernet/intel/e1000e/phy.h new file mode 100644 index 00000000000..f4f71b9991e --- /dev/null +++ b/drivers/net/ethernet/intel/e1000e/phy.h @@ -0,0 +1,242 @@ +/******************************************************************************* + + Intel PRO/1000 Linux driver + Copyright(c) 1999 - 2013 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000E_PHY_H_ +#define _E1000E_PHY_H_ + +s32 e1000e_check_downshift(struct e1000_hw *hw); +s32 e1000_check_polarity_m88(struct e1000_hw *hw); +s32 e1000_check_polarity_igp(struct e1000_hw *hw); +s32 e1000_check_polarity_ife(struct e1000_hw *hw); +s32 e1000e_check_reset_block_generic(struct e1000_hw *hw); +s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw); +s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw); +s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw); +s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw); +s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw); +s32 e1000e_get_cable_length_m88(struct e1000_hw *hw); +s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw); +s32 e1000e_get_cfg_done_generic(struct e1000_hw *hw); +s32 e1000e_get_phy_id(struct e1000_hw *hw); +s32 e1000e_get_phy_info_igp(struct e1000_hw *hw); +s32 e1000e_get_phy_info_m88(struct e1000_hw *hw); +s32 e1000_get_phy_info_ife(struct e1000_hw *hw); +s32 e1000e_phy_sw_reset(struct e1000_hw *hw); +void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl); +s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw); +s32 e1000e_phy_reset_dsp(struct e1000_hw *hw); +s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000e_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_set_page_igp(struct e1000_hw *hw, u16 page); +s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000e_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000e_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active); +s32 e1000e_setup_copper_link(struct e1000_hw *hw); +s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000e_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations, + u32 usec_interval, bool *success); +s32 e1000e_phy_init_script_igp3(struct e1000_hw *hw); +enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id); +s32 e1000e_determine_phy_address(struct e1000_hw *hw); +s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_enable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg); +s32 e1000_disable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg); +s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data); +void e1000_power_up_phy_copper(struct e1000_hw *hw); +void e1000_power_down_phy_copper(struct e1000_hw *hw); +s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_read_phy_reg_page_hv(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_write_phy_reg_page_hv(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw); +s32 e1000_copper_link_setup_82577(struct e1000_hw *hw); +s32 e1000_check_polarity_82577(struct e1000_hw *hw); +s32 e1000_get_phy_info_82577(struct e1000_hw *hw); +s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw); +s32 e1000_get_cable_length_82577(struct e1000_hw *hw); + +#define E1000_MAX_PHY_ADDR 8 + +/* IGP01E1000 Specific Registers */ +#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* Port Config */ +#define IGP01E1000_PHY_PORT_STATUS 0x11 /* Status */ +#define IGP01E1000_PHY_PORT_CTRL 0x12 /* Control */ +#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health */ +#define IGP02E1000_PHY_POWER_MGMT 0x19 /* Power Management */ +#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* Page Select */ +#define BM_PHY_PAGE_SELECT 22 /* Page Select for BM */ +#define IGP_PAGE_SHIFT 5 +#define PHY_REG_MASK 0x1F + +/* BM/HV Specific Registers */ +#define BM_PORT_CTRL_PAGE 769 +#define BM_WUC_PAGE 800 +#define BM_WUC_ADDRESS_OPCODE 0x11 +#define BM_WUC_DATA_OPCODE 0x12 +#define BM_WUC_ENABLE_PAGE BM_PORT_CTRL_PAGE +#define BM_WUC_ENABLE_REG 17 +#define BM_WUC_ENABLE_BIT (1 << 2) +#define BM_WUC_HOST_WU_BIT (1 << 4) +#define BM_WUC_ME_WU_BIT (1 << 5) + +#define PHY_UPPER_SHIFT 21 +#define BM_PHY_REG(page, reg) \ + (((reg) & MAX_PHY_REG_ADDRESS) |\ + (((page) & 0xFFFF) << PHY_PAGE_SHIFT) |\ + (((reg) & ~MAX_PHY_REG_ADDRESS) << (PHY_UPPER_SHIFT - PHY_PAGE_SHIFT))) +#define BM_PHY_REG_PAGE(offset) \ + ((u16)(((offset) >> PHY_PAGE_SHIFT) & 0xFFFF)) +#define BM_PHY_REG_NUM(offset) \ + ((u16)(((offset) & MAX_PHY_REG_ADDRESS) |\ + (((offset) >> (PHY_UPPER_SHIFT - PHY_PAGE_SHIFT)) &\ + ~MAX_PHY_REG_ADDRESS))) + +#define HV_INTC_FC_PAGE_START 768 +#define I82578_ADDR_REG 29 +#define I82577_ADDR_REG 16 +#define I82577_CFG_REG 22 +#define I82577_CFG_ASSERT_CRS_ON_TX (1 << 15) +#define I82577_CFG_ENABLE_DOWNSHIFT (3 << 10) /* auto downshift */ +#define I82577_CTRL_REG 23 + +/* 82577 specific PHY registers */ +#define I82577_PHY_CTRL_2 18 +#define I82577_PHY_LBK_CTRL 19 +#define I82577_PHY_STATUS_2 26 +#define I82577_PHY_DIAG_STATUS 31 + +/* I82577 PHY Status 2 */ +#define I82577_PHY_STATUS2_REV_POLARITY 0x0400 +#define I82577_PHY_STATUS2_MDIX 0x0800 +#define I82577_PHY_STATUS2_SPEED_MASK 0x0300 +#define I82577_PHY_STATUS2_SPEED_1000MBPS 0x0200 + +/* I82577 PHY Control 2 */ +#define I82577_PHY_CTRL2_MANUAL_MDIX 0x0200 +#define I82577_PHY_CTRL2_AUTO_MDI_MDIX 0x0400 +#define I82577_PHY_CTRL2_MDIX_CFG_MASK 0x0600 + +/* I82577 PHY Diagnostics Status */ +#define I82577_DSTATUS_CABLE_LENGTH 0x03FC +#define I82577_DSTATUS_CABLE_LENGTH_SHIFT 2 + +/* BM PHY Copper Specific Control 1 */ +#define BM_CS_CTRL1 16 + +/* BM PHY Copper Specific Status */ +#define BM_CS_STATUS 17 +#define BM_CS_STATUS_LINK_UP 0x0400 +#define BM_CS_STATUS_RESOLVED 0x0800 +#define BM_CS_STATUS_SPEED_MASK 0xC000 +#define BM_CS_STATUS_SPEED_1000 0x8000 + +/* 82577 Mobile Phy Status Register */ +#define HV_M_STATUS 26 +#define HV_M_STATUS_AUTONEG_COMPLETE 0x1000 +#define HV_M_STATUS_SPEED_MASK 0x0300 +#define HV_M_STATUS_SPEED_1000 0x0200 +#define HV_M_STATUS_LINK_UP 0x0040 + +#define IGP01E1000_PHY_PCS_INIT_REG 0x00B4 +#define IGP01E1000_PHY_POLARITY_MASK 0x0078 + +#define IGP01E1000_PSCR_AUTO_MDIX 0x1000 +#define IGP01E1000_PSCR_FORCE_MDI_MDIX 0x2000 /* 0=MDI, 1=MDIX */ + +#define IGP01E1000_PSCFR_SMART_SPEED 0x0080 + +#define IGP02E1000_PM_SPD 0x0001 /* Smart Power Down */ +#define IGP02E1000_PM_D0_LPLU 0x0002 /* For D0a states */ +#define IGP02E1000_PM_D3_LPLU 0x0004 /* For all other states */ + +#define IGP01E1000_PLHR_SS_DOWNGRADE 0x8000 + +#define IGP01E1000_PSSR_POLARITY_REVERSED 0x0002 +#define IGP01E1000_PSSR_MDIX 0x0800 +#define IGP01E1000_PSSR_SPEED_MASK 0xC000 +#define IGP01E1000_PSSR_SPEED_1000MBPS 0xC000 + +#define IGP02E1000_PHY_CHANNEL_NUM 4 +#define IGP02E1000_PHY_AGC_A 0x11B1 +#define IGP02E1000_PHY_AGC_B 0x12B1 +#define IGP02E1000_PHY_AGC_C 0x14B1 +#define IGP02E1000_PHY_AGC_D 0x18B1 + +#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Course=15:13, Fine=12:9 */ +#define IGP02E1000_AGC_LENGTH_MASK 0x7F +#define IGP02E1000_AGC_RANGE 15 + +#define E1000_CABLE_LENGTH_UNDEFINED 0xFF + +#define E1000_KMRNCTRLSTA_OFFSET 0x001F0000 +#define E1000_KMRNCTRLSTA_OFFSET_SHIFT 16 +#define E1000_KMRNCTRLSTA_REN 0x00200000 +#define E1000_KMRNCTRLSTA_CTRL_OFFSET 0x1 /* Kumeran Control */ +#define E1000_KMRNCTRLSTA_DIAG_OFFSET 0x3 /* Kumeran Diagnostic */ +#define E1000_KMRNCTRLSTA_TIMEOUTS 0x4 /* Kumeran Timeouts */ +#define E1000_KMRNCTRLSTA_INBAND_PARAM 0x9 /* Kumeran InBand Parameters */ +#define E1000_KMRNCTRLSTA_IBIST_DISABLE 0x0200 /* Kumeran IBIST Disable */ +#define E1000_KMRNCTRLSTA_DIAG_NELPBK 0x1000 /* Nearend Loopback mode */ +#define E1000_KMRNCTRLSTA_K1_CONFIG 0x7 +#define E1000_KMRNCTRLSTA_K1_ENABLE 0x0002 /* enable K1 */ +#define E1000_KMRNCTRLSTA_HD_CTRL 0x10 /* Kumeran HD Control */ + +#define IFE_PHY_EXTENDED_STATUS_CONTROL 0x10 +#define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY Special Ctrl */ +#define IFE_PHY_SPECIAL_CONTROL_LED 0x1B /* PHY Special and LED Ctrl */ +#define IFE_PHY_MDIX_CONTROL 0x1C /* MDI/MDI-X Control */ + +/* IFE PHY Extended Status Control */ +#define IFE_PESC_POLARITY_REVERSED 0x0100 + +/* IFE PHY Special Control */ +#define IFE_PSC_AUTO_POLARITY_DISABLE 0x0010 +#define IFE_PSC_FORCE_POLARITY 0x0020 + +/* IFE PHY Special Control and LED Control */ +#define IFE_PSCL_PROBE_MODE 0x0020 +#define IFE_PSCL_PROBE_LEDS_OFF 0x0006 /* Force LEDs 0 and 2 off */ +#define IFE_PSCL_PROBE_LEDS_ON 0x0007 /* Force LEDs 0 and 2 on */ + +/* IFE PHY MDIX Control */ +#define IFE_PMC_MDIX_STATUS 0x0020 /* 1=MDI-X, 0=MDI */ +#define IFE_PMC_FORCE_MDIX 0x0040 /* 1=force MDI-X, 0=force MDI */ +#define IFE_PMC_AUTO_MDIX 0x0080 /* 1=enable auto, 0=disable */ + +#endif diff --git a/drivers/net/ethernet/intel/e1000e/ptp.c b/drivers/net/ethernet/intel/e1000e/ptp.c new file mode 100644 index 00000000000..b477fa53ec9 --- /dev/null +++ b/drivers/net/ethernet/intel/e1000e/ptp.c @@ -0,0 +1,277 @@ +/******************************************************************************* + + Intel PRO/1000 Linux driver + Copyright(c) 1999 - 2013 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +/* PTP 1588 Hardware Clock (PHC) + * Derived from PTP Hardware Clock driver for Intel 82576 and 82580 (igb) + * Copyright (C) 2011 Richard Cochran <richardcochran@gmail.com> + */ + +#include "e1000.h" + +/** + * e1000e_phc_adjfreq - adjust the frequency of the hardware clock + * @ptp: ptp clock structure + * @delta: Desired frequency change in parts per billion + * + * Adjust the frequency of the PHC cycle counter by the indicated delta from + * the base frequency. + **/ +static int e1000e_phc_adjfreq(struct ptp_clock_info *ptp, s32 delta) +{ + struct e1000_adapter *adapter = container_of(ptp, struct e1000_adapter, + ptp_clock_info); + struct e1000_hw *hw = &adapter->hw; + bool neg_adj = false; + u64 adjustment; + u32 timinca, incvalue; + s32 ret_val; + + if ((delta > ptp->max_adj) || (delta <= -1000000000)) + return -EINVAL; + + if (delta < 0) { + neg_adj = true; + delta = -delta; + } + + /* Get the System Time Register SYSTIM base frequency */ + ret_val = e1000e_get_base_timinca(adapter, &timinca); + if (ret_val) + return ret_val; + + incvalue = timinca & E1000_TIMINCA_INCVALUE_MASK; + + adjustment = incvalue; + adjustment *= delta; + adjustment = div_u64(adjustment, 1000000000); + + incvalue = neg_adj ? (incvalue - adjustment) : (incvalue + adjustment); + + timinca &= ~E1000_TIMINCA_INCVALUE_MASK; + timinca |= incvalue; + + ew32(TIMINCA, timinca); + + return 0; +} + +/** + * e1000e_phc_adjtime - Shift the time of the hardware clock + * @ptp: ptp clock structure + * @delta: Desired change in nanoseconds + * + * Adjust the timer by resetting the timecounter structure. + **/ +static int e1000e_phc_adjtime(struct ptp_clock_info *ptp, s64 delta) +{ + struct e1000_adapter *adapter = container_of(ptp, struct e1000_adapter, + ptp_clock_info); + unsigned long flags; + s64 now; + + spin_lock_irqsave(&adapter->systim_lock, flags); + now = timecounter_read(&adapter->tc); + now += delta; + timecounter_init(&adapter->tc, &adapter->cc, now); + spin_unlock_irqrestore(&adapter->systim_lock, flags); + + return 0; +} + +/** + * e1000e_phc_gettime - Reads the current time from the hardware clock + * @ptp: ptp clock structure + * @ts: timespec structure to hold the current time value + * + * Read the timecounter and return the correct value in ns after converting + * it into a struct timespec. + **/ +static int e1000e_phc_gettime(struct ptp_clock_info *ptp, struct timespec *ts) +{ + struct e1000_adapter *adapter = container_of(ptp, struct e1000_adapter, + ptp_clock_info); + unsigned long flags; + u32 remainder; + u64 ns; + + spin_lock_irqsave(&adapter->systim_lock, flags); + ns = timecounter_read(&adapter->tc); + spin_unlock_irqrestore(&adapter->systim_lock, flags); + + ts->tv_sec = div_u64_rem(ns, NSEC_PER_SEC, &remainder); + ts->tv_nsec = remainder; + + return 0; +} + +/** + * e1000e_phc_settime - Set the current time on the hardware clock + * @ptp: ptp clock structure + * @ts: timespec containing the new time for the cycle counter + * + * Reset the timecounter to use a new base value instead of the kernel + * wall timer value. + **/ +static int e1000e_phc_settime(struct ptp_clock_info *ptp, + const struct timespec *ts) +{ + struct e1000_adapter *adapter = container_of(ptp, struct e1000_adapter, + ptp_clock_info); + unsigned long flags; + u64 ns; + + ns = ts->tv_sec * NSEC_PER_SEC; + ns += ts->tv_nsec; + + /* reset the timecounter */ + spin_lock_irqsave(&adapter->systim_lock, flags); + timecounter_init(&adapter->tc, &adapter->cc, ns); + spin_unlock_irqrestore(&adapter->systim_lock, flags); + + return 0; +} + +/** + * e1000e_phc_enable - enable or disable an ancillary feature + * @ptp: ptp clock structure + * @request: Desired resource to enable or disable + * @on: Caller passes one to enable or zero to disable + * + * Enable (or disable) ancillary features of the PHC subsystem. + * Currently, no ancillary features are supported. + **/ +static int e1000e_phc_enable(struct ptp_clock_info __always_unused *ptp, + struct ptp_clock_request __always_unused *request, + int __always_unused on) +{ + return -EOPNOTSUPP; +} + +static void e1000e_systim_overflow_work(struct work_struct *work) +{ + struct e1000_adapter *adapter = container_of(work, struct e1000_adapter, + systim_overflow_work.work); + struct e1000_hw *hw = &adapter->hw; + struct timespec ts; + + adapter->ptp_clock_info.gettime(&adapter->ptp_clock_info, &ts); + + e_dbg("SYSTIM overflow check at %ld.%09lu\n", ts.tv_sec, ts.tv_nsec); + + schedule_delayed_work(&adapter->systim_overflow_work, + E1000_SYSTIM_OVERFLOW_PERIOD); +} + +static const struct ptp_clock_info e1000e_ptp_clock_info = { + .owner = THIS_MODULE, + .n_alarm = 0, + .n_ext_ts = 0, + .n_per_out = 0, + .pps = 0, + .adjfreq = e1000e_phc_adjfreq, + .adjtime = e1000e_phc_adjtime, + .gettime = e1000e_phc_gettime, + .settime = e1000e_phc_settime, + .enable = e1000e_phc_enable, +}; + +/** + * e1000e_ptp_init - initialize PTP for devices which support it + * @adapter: board private structure + * + * This function performs the required steps for enabling PTP support. + * If PTP support has already been loaded it simply calls the cyclecounter + * init routine and exits. + **/ +void e1000e_ptp_init(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + + adapter->ptp_clock = NULL; + + if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP)) + return; + + adapter->ptp_clock_info = e1000e_ptp_clock_info; + + snprintf(adapter->ptp_clock_info.name, + sizeof(adapter->ptp_clock_info.name), "%pm", + adapter->netdev->perm_addr); + + switch (hw->mac.type) { + case e1000_pch2lan: + case e1000_pch_lpt: + if ((hw->mac.type != e1000_pch_lpt) || + (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI)) { + adapter->ptp_clock_info.max_adj = 24000000 - 1; + break; + } + /* fall-through */ + case e1000_82574: + case e1000_82583: + adapter->ptp_clock_info.max_adj = 600000000 - 1; + break; + default: + break; + } + + INIT_DELAYED_WORK(&adapter->systim_overflow_work, + e1000e_systim_overflow_work); + + schedule_delayed_work(&adapter->systim_overflow_work, + E1000_SYSTIM_OVERFLOW_PERIOD); + + adapter->ptp_clock = ptp_clock_register(&adapter->ptp_clock_info, + &adapter->pdev->dev); + if (IS_ERR(adapter->ptp_clock)) { + adapter->ptp_clock = NULL; + e_err("ptp_clock_register failed\n"); + } else { + e_info("registered PHC clock\n"); + } +} + +/** + * e1000e_ptp_remove - disable PTP device and stop the overflow check + * @adapter: board private structure + * + * Stop the PTP support, and cancel the delayed work. + **/ +void e1000e_ptp_remove(struct e1000_adapter *adapter) +{ + if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP)) + return; + + cancel_delayed_work_sync(&adapter->systim_overflow_work); + + if (adapter->ptp_clock) { + ptp_clock_unregister(adapter->ptp_clock); + adapter->ptp_clock = NULL; + e_info("removed PHC\n"); + } +} diff --git a/drivers/net/ethernet/intel/e1000e/regs.h b/drivers/net/ethernet/intel/e1000e/regs.h new file mode 100644 index 00000000000..794fe149766 --- /dev/null +++ b/drivers/net/ethernet/intel/e1000e/regs.h @@ -0,0 +1,252 @@ +/******************************************************************************* + + Intel PRO/1000 Linux driver + Copyright(c) 1999 - 2013 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000E_REGS_H_ +#define _E1000E_REGS_H_ + +#define E1000_CTRL 0x00000 /* Device Control - RW */ +#define E1000_STATUS 0x00008 /* Device Status - RO */ +#define E1000_EECD 0x00010 /* EEPROM/Flash Control - RW */ +#define E1000_EERD 0x00014 /* EEPROM Read - RW */ +#define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */ +#define E1000_FLA 0x0001C /* Flash Access - RW */ +#define E1000_MDIC 0x00020 /* MDI Control - RW */ +#define E1000_SCTL 0x00024 /* SerDes Control - RW */ +#define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */ +#define E1000_FCAH 0x0002C /* Flow Control Address High -RW */ +#define E1000_FEXTNVM 0x00028 /* Future Extended NVM - RW */ +#define E1000_FEXTNVM3 0x0003C /* Future Extended NVM 3 - RW */ +#define E1000_FEXTNVM4 0x00024 /* Future Extended NVM 4 - RW */ +#define E1000_FEXTNVM7 0x000E4 /* Future Extended NVM 7 - RW */ +#define E1000_FCT 0x00030 /* Flow Control Type - RW */ +#define E1000_VET 0x00038 /* VLAN Ether Type - RW */ +#define E1000_ICR 0x000C0 /* Interrupt Cause Read - R/clr */ +#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */ +#define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */ +#define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */ +#define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */ +#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */ +#define E1000_IVAR 0x000E4 /* Interrupt Vector Allocation Register - RW */ +#define E1000_SVCR 0x000F0 +#define E1000_SVT 0x000F4 +#define E1000_LPIC 0x000FC /* Low Power IDLE control */ +#define E1000_RCTL 0x00100 /* Rx Control - RW */ +#define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */ +#define E1000_TXCW 0x00178 /* Tx Configuration Word - RW */ +#define E1000_RXCW 0x00180 /* Rx Configuration Word - RO */ +#define E1000_PBA_ECC 0x01100 /* PBA ECC Register */ +#define E1000_TCTL 0x00400 /* Tx Control - RW */ +#define E1000_TCTL_EXT 0x00404 /* Extended Tx Control - RW */ +#define E1000_TIPG 0x00410 /* Tx Inter-packet gap -RW */ +#define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */ +#define E1000_LEDCTL 0x00E00 /* LED Control - RW */ +#define E1000_EXTCNF_CTRL 0x00F00 /* Extended Configuration Control */ +#define E1000_EXTCNF_SIZE 0x00F08 /* Extended Configuration Size */ +#define E1000_PHY_CTRL 0x00F10 /* PHY Control Register in CSR */ +#define E1000_POEMB E1000_PHY_CTRL /* PHY OEM Bits */ +#define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */ +#define E1000_PBS 0x01008 /* Packet Buffer Size */ +#define E1000_PBECCSTS 0x0100C /* Packet Buffer ECC Status - RW */ +#define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */ +#define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */ +#define E1000_FLOP 0x0103C /* FLASH Opcode Register */ +#define E1000_ERT 0x02008 /* Early Rx Threshold - RW */ +#define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */ +#define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */ +#define E1000_PSRCTL 0x02170 /* Packet Split Receive Control - RW */ +#define E1000_RDFH 0x02410 /* Rx Data FIFO Head - RW */ +#define E1000_RDFT 0x02418 /* Rx Data FIFO Tail - RW */ +#define E1000_RDFHS 0x02420 /* Rx Data FIFO Head Saved - RW */ +#define E1000_RDFTS 0x02428 /* Rx Data FIFO Tail Saved - RW */ +#define E1000_RDFPC 0x02430 /* Rx Data FIFO Packet Count - RW */ +/* Split and Replication Rx Control - RW */ +#define E1000_RDTR 0x02820 /* Rx Delay Timer - RW */ +#define E1000_RADV 0x0282C /* Rx Interrupt Absolute Delay Timer - RW */ +/* Convenience macros + * + * Note: "_n" is the queue number of the register to be written to. + * + * Example usage: + * E1000_RDBAL_REG(current_rx_queue) + */ +#define E1000_RDBAL(_n) ((_n) < 4 ? (0x02800 + ((_n) * 0x100)) : \ + (0x0C000 + ((_n) * 0x40))) +#define E1000_RDBAH(_n) ((_n) < 4 ? (0x02804 + ((_n) * 0x100)) : \ + (0x0C004 + ((_n) * 0x40))) +#define E1000_RDLEN(_n) ((_n) < 4 ? (0x02808 + ((_n) * 0x100)) : \ + (0x0C008 + ((_n) * 0x40))) +#define E1000_RDH(_n) ((_n) < 4 ? (0x02810 + ((_n) * 0x100)) : \ + (0x0C010 + ((_n) * 0x40))) +#define E1000_RDT(_n) ((_n) < 4 ? (0x02818 + ((_n) * 0x100)) : \ + (0x0C018 + ((_n) * 0x40))) +#define E1000_RXDCTL(_n) ((_n) < 4 ? (0x02828 + ((_n) * 0x100)) : \ + (0x0C028 + ((_n) * 0x40))) +#define E1000_TDBAL(_n) ((_n) < 4 ? (0x03800 + ((_n) * 0x100)) : \ + (0x0E000 + ((_n) * 0x40))) +#define E1000_TDBAH(_n) ((_n) < 4 ? (0x03804 + ((_n) * 0x100)) : \ + (0x0E004 + ((_n) * 0x40))) +#define E1000_TDLEN(_n) ((_n) < 4 ? (0x03808 + ((_n) * 0x100)) : \ + (0x0E008 + ((_n) * 0x40))) +#define E1000_TDH(_n) ((_n) < 4 ? (0x03810 + ((_n) * 0x100)) : \ + (0x0E010 + ((_n) * 0x40))) +#define E1000_TDT(_n) ((_n) < 4 ? (0x03818 + ((_n) * 0x100)) : \ + (0x0E018 + ((_n) * 0x40))) +#define E1000_TXDCTL(_n) ((_n) < 4 ? (0x03828 + ((_n) * 0x100)) : \ + (0x0E028 + ((_n) * 0x40))) +#define E1000_TARC(_n) (0x03840 + ((_n) * 0x100)) +#define E1000_KABGTXD 0x03004 /* AFE Band Gap Transmit Ref Data */ +#define E1000_RAL(_i) (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \ + (0x054E0 + ((_i - 16) * 8))) +#define E1000_RAH(_i) (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \ + (0x054E4 + ((_i - 16) * 8))) +#define E1000_SHRAL(_i) (0x05438 + ((_i) * 8)) +#define E1000_SHRAH(_i) (0x0543C + ((_i) * 8)) +#define E1000_TDFH 0x03410 /* Tx Data FIFO Head - RW */ +#define E1000_TDFT 0x03418 /* Tx Data FIFO Tail - RW */ +#define E1000_TDFHS 0x03420 /* Tx Data FIFO Head Saved - RW */ +#define E1000_TDFTS 0x03428 /* Tx Data FIFO Tail Saved - RW */ +#define E1000_TDFPC 0x03430 /* Tx Data FIFO Packet Count - RW */ +#define E1000_TIDV 0x03820 /* Tx Interrupt Delay Value - RW */ +#define E1000_TADV 0x0382C /* Tx Interrupt Absolute Delay Val - RW */ +#define E1000_CRCERRS 0x04000 /* CRC Error Count - R/clr */ +#define E1000_ALGNERRC 0x04004 /* Alignment Error Count - R/clr */ +#define E1000_SYMERRS 0x04008 /* Symbol Error Count - R/clr */ +#define E1000_RXERRC 0x0400C /* Receive Error Count - R/clr */ +#define E1000_MPC 0x04010 /* Missed Packet Count - R/clr */ +#define E1000_SCC 0x04014 /* Single Collision Count - R/clr */ +#define E1000_ECOL 0x04018 /* Excessive Collision Count - R/clr */ +#define E1000_MCC 0x0401C /* Multiple Collision Count - R/clr */ +#define E1000_LATECOL 0x04020 /* Late Collision Count - R/clr */ +#define E1000_COLC 0x04028 /* Collision Count - R/clr */ +#define E1000_DC 0x04030 /* Defer Count - R/clr */ +#define E1000_TNCRS 0x04034 /* Tx-No CRS - R/clr */ +#define E1000_SEC 0x04038 /* Sequence Error Count - R/clr */ +#define E1000_CEXTERR 0x0403C /* Carrier Extension Error Count - R/clr */ +#define E1000_RLEC 0x04040 /* Receive Length Error Count - R/clr */ +#define E1000_XONRXC 0x04048 /* XON Rx Count - R/clr */ +#define E1000_XONTXC 0x0404C /* XON Tx Count - R/clr */ +#define E1000_XOFFRXC 0x04050 /* XOFF Rx Count - R/clr */ +#define E1000_XOFFTXC 0x04054 /* XOFF Tx Count - R/clr */ +#define E1000_FCRUC 0x04058 /* Flow Control Rx Unsupported Count- R/clr */ +#define E1000_PRC64 0x0405C /* Packets Rx (64 bytes) - R/clr */ +#define E1000_PRC127 0x04060 /* Packets Rx (65-127 bytes) - R/clr */ +#define E1000_PRC255 0x04064 /* Packets Rx (128-255 bytes) - R/clr */ +#define E1000_PRC511 0x04068 /* Packets Rx (255-511 bytes) - R/clr */ +#define E1000_PRC1023 0x0406C /* Packets Rx (512-1023 bytes) - R/clr */ +#define E1000_PRC1522 0x04070 /* Packets Rx (1024-1522 bytes) - R/clr */ +#define E1000_GPRC 0x04074 /* Good Packets Rx Count - R/clr */ +#define E1000_BPRC 0x04078 /* Broadcast Packets Rx Count - R/clr */ +#define E1000_MPRC 0x0407C /* Multicast Packets Rx Count - R/clr */ +#define E1000_GPTC 0x04080 /* Good Packets Tx Count - R/clr */ +#define E1000_GORCL 0x04088 /* Good Octets Rx Count Low - R/clr */ +#define E1000_GORCH 0x0408C /* Good Octets Rx Count High - R/clr */ +#define E1000_GOTCL 0x04090 /* Good Octets Tx Count Low - R/clr */ +#define E1000_GOTCH 0x04094 /* Good Octets Tx Count High - R/clr */ +#define E1000_RNBC 0x040A0 /* Rx No Buffers Count - R/clr */ +#define E1000_RUC 0x040A4 /* Rx Undersize Count - R/clr */ +#define E1000_RFC 0x040A8 /* Rx Fragment Count - R/clr */ +#define E1000_ROC 0x040AC /* Rx Oversize Count - R/clr */ +#define E1000_RJC 0x040B0 /* Rx Jabber Count - R/clr */ +#define E1000_MGTPRC 0x040B4 /* Management Packets Rx Count - R/clr */ +#define E1000_MGTPDC 0x040B8 /* Management Packets Dropped Count - R/clr */ +#define E1000_MGTPTC 0x040BC /* Management Packets Tx Count - R/clr */ +#define E1000_TORL 0x040C0 /* Total Octets Rx Low - R/clr */ +#define E1000_TORH 0x040C4 /* Total Octets Rx High - R/clr */ +#define E1000_TOTL 0x040C8 /* Total Octets Tx Low - R/clr */ +#define E1000_TOTH 0x040CC /* Total Octets Tx High - R/clr */ +#define E1000_TPR 0x040D0 /* Total Packets Rx - R/clr */ +#define E1000_TPT 0x040D4 /* Total Packets Tx - R/clr */ +#define E1000_PTC64 0x040D8 /* Packets Tx (64 bytes) - R/clr */ +#define E1000_PTC127 0x040DC /* Packets Tx (65-127 bytes) - R/clr */ +#define E1000_PTC255 0x040E0 /* Packets Tx (128-255 bytes) - R/clr */ +#define E1000_PTC511 0x040E4 /* Packets Tx (256-511 bytes) - R/clr */ +#define E1000_PTC1023 0x040E8 /* Packets Tx (512-1023 bytes) - R/clr */ +#define E1000_PTC1522 0x040EC /* Packets Tx (1024-1522 Bytes) - R/clr */ +#define E1000_MPTC 0x040F0 /* Multicast Packets Tx Count - R/clr */ +#define E1000_BPTC 0x040F4 /* Broadcast Packets Tx Count - R/clr */ +#define E1000_TSCTC 0x040F8 /* TCP Segmentation Context Tx - R/clr */ +#define E1000_TSCTFC 0x040FC /* TCP Segmentation Context Tx Fail - R/clr */ +#define E1000_IAC 0x04100 /* Interrupt Assertion Count */ +#define E1000_ICRXPTC 0x04104 /* Interrupt Cause Rx Pkt Timer Expire Count */ +#define E1000_ICRXATC 0x04108 /* Interrupt Cause Rx Abs Timer Expire Count */ +#define E1000_ICTXPTC 0x0410C /* Interrupt Cause Tx Pkt Timer Expire Count */ +#define E1000_ICTXATC 0x04110 /* Interrupt Cause Tx Abs Timer Expire Count */ +#define E1000_ICTXQEC 0x04118 /* Interrupt Cause Tx Queue Empty Count */ +#define E1000_ICTXQMTC 0x0411C /* Interrupt Cause Tx Queue Min Thresh Count */ +#define E1000_ICRXDMTC 0x04120 /* Interrupt Cause Rx Desc Min Thresh Count */ +#define E1000_ICRXOC 0x04124 /* Interrupt Cause Receiver Overrun Count */ +#define E1000_CRC_OFFSET 0x05F50 /* CRC Offset register */ + +#define E1000_PCS_LCTL 0x04208 /* PCS Link Control - RW */ +#define E1000_PCS_LSTAT 0x0420C /* PCS Link Status - RO */ +#define E1000_PCS_ANADV 0x04218 /* AN advertisement - RW */ +#define E1000_PCS_LPAB 0x0421C /* Link Partner Ability - RW */ +#define E1000_RXCSUM 0x05000 /* Rx Checksum Control - RW */ +#define E1000_RFCTL 0x05008 /* Receive Filter Control */ +#define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */ +#define E1000_RA 0x05400 /* Receive Address - RW Array */ +#define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */ +#define E1000_WUC 0x05800 /* Wakeup Control - RW */ +#define E1000_WUFC 0x05808 /* Wakeup Filter Control - RW */ +#define E1000_WUS 0x05810 /* Wakeup Status - RO */ +#define E1000_MANC 0x05820 /* Management Control - RW */ +#define E1000_FFLT 0x05F00 /* Flexible Filter Length Table - RW Array */ +#define E1000_HOST_IF 0x08800 /* Host Interface */ + +#define E1000_KMRNCTRLSTA 0x00034 /* MAC-PHY interface - RW */ +#define E1000_MANC2H 0x05860 /* Management Control To Host - RW */ +/* Management Decision Filters */ +#define E1000_MDEF(_n) (0x05890 + (4 * (_n))) +#define E1000_SW_FW_SYNC 0x05B5C /* SW-FW Synchronization - RW */ +#define E1000_GCR 0x05B00 /* PCI-Ex Control */ +#define E1000_GCR2 0x05B64 /* PCI-Ex Control #2 */ +#define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */ +#define E1000_SWSM 0x05B50 /* SW Semaphore */ +#define E1000_FWSM 0x05B54 /* FW Semaphore */ +/* Driver-only SW semaphore (not used by BOOT agents) */ +#define E1000_SWSM2 0x05B58 +#define E1000_FFLT_DBG 0x05F04 /* Debug Register */ +#define E1000_HICR 0x08F00 /* Host Interface Control */ + +/* RSS registers */ +#define E1000_MRQC 0x05818 /* Multiple Receive Control - RW */ +#define E1000_RETA(_i) (0x05C00 + ((_i) * 4)) /* Redirection Table - RW */ +#define E1000_RSSRK(_i) (0x05C80 + ((_i) * 4)) /* RSS Random Key - RW */ +#define E1000_TSYNCRXCTL 0x0B620 /* Rx Time Sync Control register - RW */ +#define E1000_TSYNCTXCTL 0x0B614 /* Tx Time Sync Control register - RW */ +#define E1000_RXSTMPL 0x0B624 /* Rx timestamp Low - RO */ +#define E1000_RXSTMPH 0x0B628 /* Rx timestamp High - RO */ +#define E1000_TXSTMPL 0x0B618 /* Tx timestamp value Low - RO */ +#define E1000_TXSTMPH 0x0B61C /* Tx timestamp value High - RO */ +#define E1000_SYSTIML 0x0B600 /* System time register Low - RO */ +#define E1000_SYSTIMH 0x0B604 /* System time register High - RO */ +#define E1000_TIMINCA 0x0B608 /* Increment attributes register - RW */ +#define E1000_RXMTRL 0x0B634 /* Time sync Rx EtherType and Msg Type - RW */ +#define E1000_RXUDP 0x0B638 /* Time Sync Rx UDP Port - RW */ + +#endif diff --git a/drivers/net/ethernet/intel/igb/Makefile b/drivers/net/ethernet/intel/igb/Makefile index 624476cfa72..f19700e285b 100644 --- a/drivers/net/ethernet/intel/igb/Makefile +++ b/drivers/net/ethernet/intel/igb/Makefile @@ -1,7 +1,7 @@ ################################################################################ # # Intel 82575 PCI-Express Ethernet Linux driver -# Copyright(c) 1999 - 2012 Intel Corporation. +# Copyright(c) 1999 - 2013 Intel Corporation. # # This program is free software; you can redistribute it and/or modify it # under the terms and conditions of the GNU General Public License, @@ -34,4 +34,4 @@ obj-$(CONFIG_IGB) += igb.o igb-objs := igb_main.o igb_ethtool.o e1000_82575.o \ e1000_mac.o e1000_nvm.o e1000_phy.o e1000_mbx.o \ - e1000_i210.o igb_ptp.o + e1000_i210.o igb_ptp.o igb_hwmon.o diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c index fdaaf2709d0..84e7e0909de 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.c +++ b/drivers/net/ethernet/intel/igb/e1000_82575.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2012 Intel Corporation. + Copyright(c) 2007-2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -33,6 +33,7 @@ #include <linux/types.h> #include <linux/if_ether.h> +#include <linux/i2c.h> #include "e1000_mac.h" #include "e1000_82575.h" @@ -110,184 +111,168 @@ static bool igb_sgmii_uses_mdio_82575(struct e1000_hw *hw) return ext_mdio; } -static s32 igb_get_invariants_82575(struct e1000_hw *hw) +/** + * igb_init_phy_params_82575 - Init PHY func ptrs. + * @hw: pointer to the HW structure + **/ +static s32 igb_init_phy_params_82575(struct e1000_hw *hw) { struct e1000_phy_info *phy = &hw->phy; - struct e1000_nvm_info *nvm = &hw->nvm; - struct e1000_mac_info *mac = &hw->mac; - struct e1000_dev_spec_82575 * dev_spec = &hw->dev_spec._82575; - u32 eecd; - s32 ret_val; - u16 size; - u32 ctrl_ext = 0; + s32 ret_val = 0; + u32 ctrl_ext; - switch (hw->device_id) { - case E1000_DEV_ID_82575EB_COPPER: - case E1000_DEV_ID_82575EB_FIBER_SERDES: - case E1000_DEV_ID_82575GB_QUAD_COPPER: - mac->type = e1000_82575; - break; - case E1000_DEV_ID_82576: - case E1000_DEV_ID_82576_NS: - case E1000_DEV_ID_82576_NS_SERDES: - case E1000_DEV_ID_82576_FIBER: - case E1000_DEV_ID_82576_SERDES: - case E1000_DEV_ID_82576_QUAD_COPPER: - case E1000_DEV_ID_82576_QUAD_COPPER_ET2: - case E1000_DEV_ID_82576_SERDES_QUAD: - mac->type = e1000_82576; - break; - case E1000_DEV_ID_82580_COPPER: - case E1000_DEV_ID_82580_FIBER: - case E1000_DEV_ID_82580_QUAD_FIBER: - case E1000_DEV_ID_82580_SERDES: - case E1000_DEV_ID_82580_SGMII: - case E1000_DEV_ID_82580_COPPER_DUAL: - case E1000_DEV_ID_DH89XXCC_SGMII: - case E1000_DEV_ID_DH89XXCC_SERDES: - case E1000_DEV_ID_DH89XXCC_BACKPLANE: - case E1000_DEV_ID_DH89XXCC_SFP: - mac->type = e1000_82580; - break; - case E1000_DEV_ID_I350_COPPER: - case E1000_DEV_ID_I350_FIBER: - case E1000_DEV_ID_I350_SERDES: - case E1000_DEV_ID_I350_SGMII: - mac->type = e1000_i350; - break; - case E1000_DEV_ID_I210_COPPER: - case E1000_DEV_ID_I210_COPPER_OEM1: - case E1000_DEV_ID_I210_COPPER_IT: - case E1000_DEV_ID_I210_FIBER: - case E1000_DEV_ID_I210_SERDES: - case E1000_DEV_ID_I210_SGMII: - mac->type = e1000_i210; - break; - case E1000_DEV_ID_I211_COPPER: - mac->type = e1000_i211; - break; - default: - return -E1000_ERR_MAC_INIT; - break; + if (hw->phy.media_type != e1000_media_type_copper) { + phy->type = e1000_phy_none; + goto out; } - /* Set media type */ - /* - * The 82575 uses bits 22:23 for link mode. The mode can be changed - * based on the EEPROM. We cannot rely upon device ID. There - * is no distinguishable difference between fiber and internal - * SerDes mode on the 82575. There can be an external PHY attached - * on the SGMII interface. For this, we'll set sgmii_active to true. - */ - phy->media_type = e1000_media_type_copper; - dev_spec->sgmii_active = false; + phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; + phy->reset_delay_us = 100; ctrl_ext = rd32(E1000_CTRL_EXT); - switch (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK) { - case E1000_CTRL_EXT_LINK_MODE_SGMII: - dev_spec->sgmii_active = true; - break; - case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX: - case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES: - hw->phy.media_type = e1000_media_type_internal_serdes; - break; - default: - break; + + if (igb_sgmii_active_82575(hw)) { + phy->ops.reset = igb_phy_hw_reset_sgmii_82575; + ctrl_ext |= E1000_CTRL_I2C_ENA; + } else { + phy->ops.reset = igb_phy_hw_reset; + ctrl_ext &= ~E1000_CTRL_I2C_ENA; } - /* Set mta register count */ - mac->mta_reg_count = 128; - /* Set rar entry count */ - switch (mac->type) { - case e1000_82576: - mac->rar_entry_count = E1000_RAR_ENTRIES_82576; + wr32(E1000_CTRL_EXT, ctrl_ext); + igb_reset_mdicnfg_82580(hw); + + if (igb_sgmii_active_82575(hw) && !igb_sgmii_uses_mdio_82575(hw)) { + phy->ops.read_reg = igb_read_phy_reg_sgmii_82575; + phy->ops.write_reg = igb_write_phy_reg_sgmii_82575; + } else { + switch (hw->mac.type) { + case e1000_82580: + case e1000_i350: + phy->ops.read_reg = igb_read_phy_reg_82580; + phy->ops.write_reg = igb_write_phy_reg_82580; + break; + case e1000_i210: + case e1000_i211: + phy->ops.read_reg = igb_read_phy_reg_gs40g; + phy->ops.write_reg = igb_write_phy_reg_gs40g; + break; + default: + phy->ops.read_reg = igb_read_phy_reg_igp; + phy->ops.write_reg = igb_write_phy_reg_igp; + } + } + + /* set lan id */ + hw->bus.func = (rd32(E1000_STATUS) & E1000_STATUS_FUNC_MASK) >> + E1000_STATUS_FUNC_SHIFT; + + /* Set phy->phy_addr and phy->id. */ + ret_val = igb_get_phy_id_82575(hw); + if (ret_val) + return ret_val; + + /* Verify phy id and set remaining function pointers */ + switch (phy->id) { + case I347AT4_E_PHY_ID: + case M88E1112_E_PHY_ID: + case M88E1111_I_PHY_ID: + phy->type = e1000_phy_m88; + phy->ops.get_phy_info = igb_get_phy_info_m88; + if (phy->id == I347AT4_E_PHY_ID || + phy->id == M88E1112_E_PHY_ID) + phy->ops.get_cable_length = + igb_get_cable_length_m88_gen2; + else + phy->ops.get_cable_length = igb_get_cable_length_m88; + phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_m88; break; - case e1000_82580: - mac->rar_entry_count = E1000_RAR_ENTRIES_82580; + case IGP03E1000_E_PHY_ID: + phy->type = e1000_phy_igp_3; + phy->ops.get_phy_info = igb_get_phy_info_igp; + phy->ops.get_cable_length = igb_get_cable_length_igp_2; + phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_igp; + phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82575; + phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state; break; - case e1000_i350: - mac->rar_entry_count = E1000_RAR_ENTRIES_I350; + case I82580_I_PHY_ID: + case I350_I_PHY_ID: + phy->type = e1000_phy_82580; + phy->ops.force_speed_duplex = + igb_phy_force_speed_duplex_82580; + phy->ops.get_cable_length = igb_get_cable_length_82580; + phy->ops.get_phy_info = igb_get_phy_info_82580; + phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82580; + phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state_82580; break; - default: - mac->rar_entry_count = E1000_RAR_ENTRIES_82575; + case I210_I_PHY_ID: + phy->type = e1000_phy_i210; + phy->ops.check_polarity = igb_check_polarity_m88; + phy->ops.get_phy_info = igb_get_phy_info_m88; + phy->ops.get_cable_length = igb_get_cable_length_m88_gen2; + phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82580; + phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state_82580; + phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_m88; break; + default: + ret_val = -E1000_ERR_PHY; + goto out; } - /* reset */ - if (mac->type >= e1000_82580) - mac->ops.reset_hw = igb_reset_hw_82580; - else - mac->ops.reset_hw = igb_reset_hw_82575; - if (mac->type >= e1000_i210) { - mac->ops.acquire_swfw_sync = igb_acquire_swfw_sync_i210; - mac->ops.release_swfw_sync = igb_release_swfw_sync_i210; - } else { - mac->ops.acquire_swfw_sync = igb_acquire_swfw_sync_82575; - mac->ops.release_swfw_sync = igb_release_swfw_sync_82575; - } +out: + return ret_val; +} - /* Set if part includes ASF firmware */ - mac->asf_firmware_present = true; - /* Set if manageability features are enabled. */ - mac->arc_subsystem_valid = - (rd32(E1000_FWSM) & E1000_FWSM_MODE_MASK) - ? true : false; - /* enable EEE on i350 parts and later parts */ - if (mac->type >= e1000_i350) - dev_spec->eee_disable = false; - else - dev_spec->eee_disable = true; - /* physical interface link setup */ - mac->ops.setup_physical_interface = - (hw->phy.media_type == e1000_media_type_copper) - ? igb_setup_copper_link_82575 - : igb_setup_serdes_link_82575; +/** + * igb_init_nvm_params_82575 - Init NVM func ptrs. + * @hw: pointer to the HW structure + **/ +s32 igb_init_nvm_params_82575(struct e1000_hw *hw) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + u32 eecd = rd32(E1000_EECD); + u16 size; - /* NVM initialization */ - eecd = rd32(E1000_EECD); size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >> E1000_EECD_SIZE_EX_SHIFT); - - /* - * Added to a constant, "size" becomes the left-shift value + /* Added to a constant, "size" becomes the left-shift value * for setting word_size. */ size += NVM_WORD_SIZE_BASE_SHIFT; - /* - * Check for invalid size + /* Just in case size is out of range, cap it to the largest + * EEPROM size supported */ - if ((hw->mac.type == e1000_82576) && (size > 15)) { - pr_notice("The NVM size is not valid, defaulting to 32K\n"); + if (size > 15) size = 15; - } nvm->word_size = 1 << size; if (hw->mac.type < e1000_i210) { - nvm->opcode_bits = 8; - nvm->delay_usec = 1; + nvm->opcode_bits = 8; + nvm->delay_usec = 1; + switch (nvm->override) { case e1000_nvm_override_spi_large: - nvm->page_size = 32; + nvm->page_size = 32; nvm->address_bits = 16; break; case e1000_nvm_override_spi_small: - nvm->page_size = 8; + nvm->page_size = 8; nvm->address_bits = 8; break; default: - nvm->page_size = eecd - & E1000_EECD_ADDR_BITS ? 32 : 8; - nvm->address_bits = eecd - & E1000_EECD_ADDR_BITS ? 16 : 8; + nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8; + nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ? + 16 : 8; break; } if (nvm->word_size == (1 << 15)) nvm->page_size = 128; nvm->type = e1000_nvm_eeprom_spi; - } else + } else { nvm->type = e1000_nvm_flash_hw; + } /* NVM Function Pointers */ switch (hw->mac.type) { @@ -344,118 +329,176 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) break; } - /* if part supports SR-IOV then initialize mailbox parameters */ + return 0; +} + +/** + * igb_init_mac_params_82575 - Init MAC func ptrs. + * @hw: pointer to the HW structure + **/ +static s32 igb_init_mac_params_82575(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575; + + /* Set mta register count */ + mac->mta_reg_count = 128; + /* Set rar entry count */ switch (mac->type) { case e1000_82576: + mac->rar_entry_count = E1000_RAR_ENTRIES_82576; + break; + case e1000_82580: + mac->rar_entry_count = E1000_RAR_ENTRIES_82580; + break; case e1000_i350: - igb_init_mbx_params_pf(hw); + mac->rar_entry_count = E1000_RAR_ENTRIES_I350; break; default: + mac->rar_entry_count = E1000_RAR_ENTRIES_82575; break; } + /* reset */ + if (mac->type >= e1000_82580) + mac->ops.reset_hw = igb_reset_hw_82580; + else + mac->ops.reset_hw = igb_reset_hw_82575; - /* setup PHY parameters */ - if (phy->media_type != e1000_media_type_copper) { - phy->type = e1000_phy_none; - return 0; - } - - phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; - phy->reset_delay_us = 100; - - ctrl_ext = rd32(E1000_CTRL_EXT); + if (mac->type >= e1000_i210) { + mac->ops.acquire_swfw_sync = igb_acquire_swfw_sync_i210; + mac->ops.release_swfw_sync = igb_release_swfw_sync_i210; - /* PHY function pointers */ - if (igb_sgmii_active_82575(hw)) { - phy->ops.reset = igb_phy_hw_reset_sgmii_82575; - ctrl_ext |= E1000_CTRL_I2C_ENA; } else { - phy->ops.reset = igb_phy_hw_reset; - ctrl_ext &= ~E1000_CTRL_I2C_ENA; + mac->ops.acquire_swfw_sync = igb_acquire_swfw_sync_82575; + mac->ops.release_swfw_sync = igb_release_swfw_sync_82575; } - wr32(E1000_CTRL_EXT, ctrl_ext); - igb_reset_mdicnfg_82580(hw); - - if (igb_sgmii_active_82575(hw) && !igb_sgmii_uses_mdio_82575(hw)) { - phy->ops.read_reg = igb_read_phy_reg_sgmii_82575; - phy->ops.write_reg = igb_write_phy_reg_sgmii_82575; - } else if ((hw->mac.type == e1000_82580) - || (hw->mac.type == e1000_i350)) { - phy->ops.read_reg = igb_read_phy_reg_82580; - phy->ops.write_reg = igb_write_phy_reg_82580; - } else if (hw->phy.type >= e1000_phy_i210) { - phy->ops.read_reg = igb_read_phy_reg_gs40g; - phy->ops.write_reg = igb_write_phy_reg_gs40g; - } else { - phy->ops.read_reg = igb_read_phy_reg_igp; - phy->ops.write_reg = igb_write_phy_reg_igp; - } + /* Set if part includes ASF firmware */ + mac->asf_firmware_present = true; + /* Set if manageability features are enabled. */ + mac->arc_subsystem_valid = + (rd32(E1000_FWSM) & E1000_FWSM_MODE_MASK) + ? true : false; + /* enable EEE on i350 parts and later parts */ + if (mac->type >= e1000_i350) + dev_spec->eee_disable = false; + else + dev_spec->eee_disable = true; + /* physical interface link setup */ + mac->ops.setup_physical_interface = + (hw->phy.media_type == e1000_media_type_copper) + ? igb_setup_copper_link_82575 + : igb_setup_serdes_link_82575; - /* set lan id */ - hw->bus.func = (rd32(E1000_STATUS) & E1000_STATUS_FUNC_MASK) >> - E1000_STATUS_FUNC_SHIFT; + return 0; +} - /* Set phy->phy_addr and phy->id. */ - ret_val = igb_get_phy_id_82575(hw); - if (ret_val) - return ret_val; +static s32 igb_get_invariants_82575(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + struct e1000_dev_spec_82575 * dev_spec = &hw->dev_spec._82575; + s32 ret_val; + u32 ctrl_ext = 0; - /* Verify phy id and set remaining function pointers */ - switch (phy->id) { - case I347AT4_E_PHY_ID: - case M88E1112_E_PHY_ID: - case M88E1111_I_PHY_ID: - phy->type = e1000_phy_m88; - phy->ops.get_phy_info = igb_get_phy_info_m88; + switch (hw->device_id) { + case E1000_DEV_ID_82575EB_COPPER: + case E1000_DEV_ID_82575EB_FIBER_SERDES: + case E1000_DEV_ID_82575GB_QUAD_COPPER: + mac->type = e1000_82575; + break; + case E1000_DEV_ID_82576: + case E1000_DEV_ID_82576_NS: + case E1000_DEV_ID_82576_NS_SERDES: + case E1000_DEV_ID_82576_FIBER: + case E1000_DEV_ID_82576_SERDES: + case E1000_DEV_ID_82576_QUAD_COPPER: + case E1000_DEV_ID_82576_QUAD_COPPER_ET2: + case E1000_DEV_ID_82576_SERDES_QUAD: + mac->type = e1000_82576; + break; + case E1000_DEV_ID_82580_COPPER: + case E1000_DEV_ID_82580_FIBER: + case E1000_DEV_ID_82580_QUAD_FIBER: + case E1000_DEV_ID_82580_SERDES: + case E1000_DEV_ID_82580_SGMII: + case E1000_DEV_ID_82580_COPPER_DUAL: + case E1000_DEV_ID_DH89XXCC_SGMII: + case E1000_DEV_ID_DH89XXCC_SERDES: + case E1000_DEV_ID_DH89XXCC_BACKPLANE: + case E1000_DEV_ID_DH89XXCC_SFP: + mac->type = e1000_82580; + break; + case E1000_DEV_ID_I350_COPPER: + case E1000_DEV_ID_I350_FIBER: + case E1000_DEV_ID_I350_SERDES: + case E1000_DEV_ID_I350_SGMII: + mac->type = e1000_i350; + break; + case E1000_DEV_ID_I210_COPPER: + case E1000_DEV_ID_I210_COPPER_OEM1: + case E1000_DEV_ID_I210_COPPER_IT: + case E1000_DEV_ID_I210_FIBER: + case E1000_DEV_ID_I210_SERDES: + case E1000_DEV_ID_I210_SGMII: + mac->type = e1000_i210; + break; + case E1000_DEV_ID_I211_COPPER: + mac->type = e1000_i211; + break; + default: + return -E1000_ERR_MAC_INIT; + break; + } - if (phy->id == I347AT4_E_PHY_ID || - phy->id == M88E1112_E_PHY_ID) - phy->ops.get_cable_length = igb_get_cable_length_m88_gen2; - else - phy->ops.get_cable_length = igb_get_cable_length_m88; + /* Set media type */ + /* + * The 82575 uses bits 22:23 for link mode. The mode can be changed + * based on the EEPROM. We cannot rely upon device ID. There + * is no distinguishable difference between fiber and internal + * SerDes mode on the 82575. There can be an external PHY attached + * on the SGMII interface. For this, we'll set sgmii_active to true. + */ + hw->phy.media_type = e1000_media_type_copper; + dev_spec->sgmii_active = false; - if (phy->id == I210_I_PHY_ID) { - phy->ops.get_cable_length = - igb_get_cable_length_m88_gen2; - phy->ops.set_d0_lplu_state = - igb_set_d0_lplu_state_82580; - phy->ops.set_d3_lplu_state = - igb_set_d3_lplu_state_82580; - } - phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_m88; + ctrl_ext = rd32(E1000_CTRL_EXT); + switch (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK) { + case E1000_CTRL_EXT_LINK_MODE_SGMII: + dev_spec->sgmii_active = true; break; - case IGP03E1000_E_PHY_ID: - phy->type = e1000_phy_igp_3; - phy->ops.get_phy_info = igb_get_phy_info_igp; - phy->ops.get_cable_length = igb_get_cable_length_igp_2; - phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_igp; - phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82575; - phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state; + case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX: + case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES: + hw->phy.media_type = e1000_media_type_internal_serdes; break; - case I82580_I_PHY_ID: - case I350_I_PHY_ID: - phy->type = e1000_phy_82580; - phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_82580; - phy->ops.get_cable_length = igb_get_cable_length_82580; - phy->ops.get_phy_info = igb_get_phy_info_82580; - phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82580; - phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state_82580; + default: break; - case I210_I_PHY_ID: - phy->type = e1000_phy_i210; - phy->ops.get_phy_info = igb_get_phy_info_m88; - phy->ops.check_polarity = igb_check_polarity_m88; - phy->ops.get_cable_length = igb_get_cable_length_m88_gen2; - phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82580; - phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state_82580; - phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_m88; + } + + /* mac initialization and operations */ + ret_val = igb_init_mac_params_82575(hw); + if (ret_val) + goto out; + + /* NVM initialization */ + ret_val = igb_init_nvm_params_82575(hw); + if (ret_val) + goto out; + + /* if part supports SR-IOV then initialize mailbox parameters */ + switch (mac->type) { + case e1000_82576: + case e1000_i350: + igb_init_mbx_params_pf(hw); break; default: - return -E1000_ERR_PHY; + break; } - return 0; + /* setup PHY parameters */ + ret_val = igb_init_phy_params_82575(hw); + +out: + return ret_val; } /** @@ -2302,18 +2345,157 @@ out: return ret_val; } +static const u8 e1000_emc_temp_data[4] = { + E1000_EMC_INTERNAL_DATA, + E1000_EMC_DIODE1_DATA, + E1000_EMC_DIODE2_DATA, + E1000_EMC_DIODE3_DATA +}; +static const u8 e1000_emc_therm_limit[4] = { + E1000_EMC_INTERNAL_THERM_LIMIT, + E1000_EMC_DIODE1_THERM_LIMIT, + E1000_EMC_DIODE2_THERM_LIMIT, + E1000_EMC_DIODE3_THERM_LIMIT +}; + +/* igb_get_thermal_sensor_data_generic - Gathers thermal sensor data + * @hw: pointer to hardware structure + * + * Updates the temperatures in mac.thermal_sensor_data + */ +s32 igb_get_thermal_sensor_data_generic(struct e1000_hw *hw) +{ + s32 status = E1000_SUCCESS; + u16 ets_offset; + u16 ets_cfg; + u16 ets_sensor; + u8 num_sensors; + u8 sensor_index; + u8 sensor_location; + u8 i; + struct e1000_thermal_sensor_data *data = &hw->mac.thermal_sensor_data; + + if ((hw->mac.type != e1000_i350) || (hw->bus.func != 0)) + return E1000_NOT_IMPLEMENTED; + + data->sensor[0].temp = (rd32(E1000_THMJT) & 0xFF); + + /* Return the internal sensor only if ETS is unsupported */ + hw->nvm.ops.read(hw, NVM_ETS_CFG, 1, &ets_offset); + if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF)) + return status; + + hw->nvm.ops.read(hw, ets_offset, 1, &ets_cfg); + if (((ets_cfg & NVM_ETS_TYPE_MASK) >> NVM_ETS_TYPE_SHIFT) + != NVM_ETS_TYPE_EMC) + return E1000_NOT_IMPLEMENTED; + + num_sensors = (ets_cfg & NVM_ETS_NUM_SENSORS_MASK); + if (num_sensors > E1000_MAX_SENSORS) + num_sensors = E1000_MAX_SENSORS; + + for (i = 1; i < num_sensors; i++) { + hw->nvm.ops.read(hw, (ets_offset + i), 1, &ets_sensor); + sensor_index = ((ets_sensor & NVM_ETS_DATA_INDEX_MASK) >> + NVM_ETS_DATA_INDEX_SHIFT); + sensor_location = ((ets_sensor & NVM_ETS_DATA_LOC_MASK) >> + NVM_ETS_DATA_LOC_SHIFT); + + if (sensor_location != 0) + hw->phy.ops.read_i2c_byte(hw, + e1000_emc_temp_data[sensor_index], + E1000_I2C_THERMAL_SENSOR_ADDR, + &data->sensor[i].temp); + } + return status; +} + +/* igb_init_thermal_sensor_thresh_generic - Sets thermal sensor thresholds + * @hw: pointer to hardware structure + * + * Sets the thermal sensor thresholds according to the NVM map + * and save off the threshold and location values into mac.thermal_sensor_data + */ +s32 igb_init_thermal_sensor_thresh_generic(struct e1000_hw *hw) +{ + s32 status = E1000_SUCCESS; + u16 ets_offset; + u16 ets_cfg; + u16 ets_sensor; + u8 low_thresh_delta; + u8 num_sensors; + u8 sensor_index; + u8 sensor_location; + u8 therm_limit; + u8 i; + struct e1000_thermal_sensor_data *data = &hw->mac.thermal_sensor_data; + + if ((hw->mac.type != e1000_i350) || (hw->bus.func != 0)) + return E1000_NOT_IMPLEMENTED; + + memset(data, 0, sizeof(struct e1000_thermal_sensor_data)); + + data->sensor[0].location = 0x1; + data->sensor[0].caution_thresh = + (rd32(E1000_THHIGHTC) & 0xFF); + data->sensor[0].max_op_thresh = + (rd32(E1000_THLOWTC) & 0xFF); + + /* Return the internal sensor only if ETS is unsupported */ + hw->nvm.ops.read(hw, NVM_ETS_CFG, 1, &ets_offset); + if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF)) + return status; + + hw->nvm.ops.read(hw, ets_offset, 1, &ets_cfg); + if (((ets_cfg & NVM_ETS_TYPE_MASK) >> NVM_ETS_TYPE_SHIFT) + != NVM_ETS_TYPE_EMC) + return E1000_NOT_IMPLEMENTED; + + low_thresh_delta = ((ets_cfg & NVM_ETS_LTHRES_DELTA_MASK) >> + NVM_ETS_LTHRES_DELTA_SHIFT); + num_sensors = (ets_cfg & NVM_ETS_NUM_SENSORS_MASK); + + for (i = 1; i <= num_sensors; i++) { + hw->nvm.ops.read(hw, (ets_offset + i), 1, &ets_sensor); + sensor_index = ((ets_sensor & NVM_ETS_DATA_INDEX_MASK) >> + NVM_ETS_DATA_INDEX_SHIFT); + sensor_location = ((ets_sensor & NVM_ETS_DATA_LOC_MASK) >> + NVM_ETS_DATA_LOC_SHIFT); + therm_limit = ets_sensor & NVM_ETS_DATA_HTHRESH_MASK; + + hw->phy.ops.write_i2c_byte(hw, + e1000_emc_therm_limit[sensor_index], + E1000_I2C_THERMAL_SENSOR_ADDR, + therm_limit); + + if ((i < E1000_MAX_SENSORS) && (sensor_location != 0)) { + data->sensor[i].location = sensor_location; + data->sensor[i].caution_thresh = therm_limit; + data->sensor[i].max_op_thresh = therm_limit - + low_thresh_delta; + } + } + return status; +} + static struct e1000_mac_operations e1000_mac_ops_82575 = { .init_hw = igb_init_hw_82575, .check_for_link = igb_check_for_link_82575, .rar_set = igb_rar_set, .read_mac_addr = igb_read_mac_addr_82575, .get_speed_and_duplex = igb_get_speed_and_duplex_copper, +#ifdef CONFIG_IGB_HWMON + .get_thermal_sensor_data = igb_get_thermal_sensor_data_generic, + .init_thermal_sensor_thresh = igb_init_thermal_sensor_thresh_generic, +#endif }; static struct e1000_phy_operations e1000_phy_ops_82575 = { .acquire = igb_acquire_phy_82575, .get_cfg_done = igb_get_cfg_done_82575, .release = igb_release_phy_82575, + .write_i2c_byte = igb_write_i2c_byte, + .read_i2c_byte = igb_read_i2c_byte, }; static struct e1000_nvm_operations e1000_nvm_ops_82575 = { diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.h b/drivers/net/ethernet/intel/igb/e1000_82575.h index 44b76b3b681..73ab41f0e03 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.h +++ b/drivers/net/ethernet/intel/igb/e1000_82575.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2012 Intel Corporation. + Copyright(c) 2007-2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -32,6 +32,10 @@ extern void igb_shutdown_serdes_link_82575(struct e1000_hw *hw); extern void igb_power_up_serdes_link_82575(struct e1000_hw *hw); extern void igb_power_down_phy_copper_82575(struct e1000_hw *hw); extern void igb_rx_fifo_flush_82575(struct e1000_hw *hw); +extern s32 igb_read_i2c_byte(struct e1000_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data); +extern s32 igb_write_i2c_byte(struct e1000_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data); #define ID_LED_DEFAULT_82575_SERDES ((ID_LED_DEF1_DEF2 << 12) | \ (ID_LED_DEF1_DEF2 << 8) | \ @@ -260,5 +264,16 @@ void igb_vmdq_set_loopback_pf(struct e1000_hw *, bool); void igb_vmdq_set_replication_pf(struct e1000_hw *, bool); u16 igb_rxpbs_adjust_82580(u32 data); s32 igb_set_eee_i350(struct e1000_hw *); - +s32 igb_init_thermal_sensor_thresh_generic(struct e1000_hw *); +s32 igb_get_thermal_sensor_data_generic(struct e1000_hw *hw); + +#define E1000_I2C_THERMAL_SENSOR_ADDR 0xF8 +#define E1000_EMC_INTERNAL_DATA 0x00 +#define E1000_EMC_INTERNAL_THERM_LIMIT 0x20 +#define E1000_EMC_DIODE1_DATA 0x01 +#define E1000_EMC_DIODE1_THERM_LIMIT 0x19 +#define E1000_EMC_DIODE2_DATA 0x23 +#define E1000_EMC_DIODE2_THERM_LIMIT 0x1A +#define E1000_EMC_DIODE3_DATA 0x2A +#define E1000_EMC_DIODE3_THERM_LIMIT 0x30 #endif diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h index 45dce06eff2..7e13337d3b9 100644 --- a/drivers/net/ethernet/intel/igb/e1000_defines.h +++ b/drivers/net/ethernet/intel/igb/e1000_defines.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2012 Intel Corporation. + Copyright(c) 2007-2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -470,6 +470,7 @@ #define E1000_ERR_NO_SPACE 17 #define E1000_ERR_NVM_PBA_SECTION 18 #define E1000_ERR_INVM_VALUE_NOT_FOUND 19 +#define E1000_ERR_I2C 20 /* Loop limit on how long we wait for auto-negotiation to complete */ #define COPPER_LINK_UP_LIMIT 10 @@ -674,6 +675,18 @@ #define NVM_COMB_VER_SHFT 8 #define NVM_VER_INVALID 0xFFFF #define NVM_ETRACK_SHIFT 16 +#define NVM_ETS_CFG 0x003E +#define NVM_ETS_LTHRES_DELTA_MASK 0x07C0 +#define NVM_ETS_LTHRES_DELTA_SHIFT 6 +#define NVM_ETS_TYPE_MASK 0x0038 +#define NVM_ETS_TYPE_SHIFT 3 +#define NVM_ETS_TYPE_EMC 0x000 +#define NVM_ETS_NUM_SENSORS_MASK 0x0007 +#define NVM_ETS_DATA_LOC_MASK 0x3C00 +#define NVM_ETS_DATA_LOC_SHIFT 10 +#define NVM_ETS_DATA_INDEX_MASK 0x0300 +#define NVM_ETS_DATA_INDEX_SHIFT 8 +#define NVM_ETS_DATA_HTHRESH_MASK 0x00FF #define E1000_NVM_CFG_DONE_PORT_0 0x040000 /* MNG config cycle done */ #define E1000_NVM_CFG_DONE_PORT_1 0x080000 /* ...for second port */ diff --git a/drivers/net/ethernet/intel/igb/e1000_hw.h b/drivers/net/ethernet/intel/igb/e1000_hw.h index c2a51dcda55..0d5cf9c63d0 100644 --- a/drivers/net/ethernet/intel/igb/e1000_hw.h +++ b/drivers/net/ethernet/intel/igb/e1000_hw.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2012 Intel Corporation. + Copyright(c) 2007-2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -325,6 +325,10 @@ struct e1000_mac_operations { s32 (*get_speed_and_duplex)(struct e1000_hw *, u16 *, u16 *); s32 (*acquire_swfw_sync)(struct e1000_hw *, u16); void (*release_swfw_sync)(struct e1000_hw *, u16); +#ifdef CONFIG_IGB_HWMON + s32 (*get_thermal_sensor_data)(struct e1000_hw *); + s32 (*init_thermal_sensor_thresh)(struct e1000_hw *); +#endif }; @@ -342,6 +346,8 @@ struct e1000_phy_operations { s32 (*set_d0_lplu_state)(struct e1000_hw *, bool); s32 (*set_d3_lplu_state)(struct e1000_hw *, bool); s32 (*write_reg)(struct e1000_hw *, u32, u16); + s32 (*read_i2c_byte)(struct e1000_hw *, u8, u8, u8 *); + s32 (*write_i2c_byte)(struct e1000_hw *, u8, u8, u8); }; struct e1000_nvm_operations { @@ -354,6 +360,19 @@ struct e1000_nvm_operations { s32 (*valid_led_default)(struct e1000_hw *, u16 *); }; +#define E1000_MAX_SENSORS 3 + +struct e1000_thermal_diode_data { + u8 location; + u8 temp; + u8 caution_thresh; + u8 max_op_thresh; +}; + +struct e1000_thermal_sensor_data { + struct e1000_thermal_diode_data sensor[E1000_MAX_SENSORS]; +}; + struct e1000_info { s32 (*get_invariants)(struct e1000_hw *); struct e1000_mac_operations *mac_ops; @@ -399,6 +418,7 @@ struct e1000_mac_info { bool report_tx_early; bool serdes_has_link; bool tx_pkt_filtering; + struct e1000_thermal_sensor_data thermal_sensor_data; }; struct e1000_phy_info { diff --git a/drivers/net/ethernet/intel/igb/e1000_i210.c b/drivers/net/ethernet/intel/igb/e1000_i210.c index fbcdbebb0b5..6a42344f24f 100644 --- a/drivers/net/ethernet/intel/igb/e1000_i210.c +++ b/drivers/net/ethernet/intel/igb/e1000_i210.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2012 Intel Corporation. + Copyright(c) 2007-2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/igb/e1000_i210.h b/drivers/net/ethernet/intel/igb/e1000_i210.h index 1c89358a99a..e4e1a73b7c7 100644 --- a/drivers/net/ethernet/intel/igb/e1000_i210.h +++ b/drivers/net/ethernet/intel/igb/e1000_i210.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2012 Intel Corporation. + Copyright(c) 2007-2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/igb/e1000_mac.c b/drivers/net/ethernet/intel/igb/e1000_mac.c index 101e6e4da97..a5c7200b9a7 100644 --- a/drivers/net/ethernet/intel/igb/e1000_mac.c +++ b/drivers/net/ethernet/intel/igb/e1000_mac.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2012 Intel Corporation. + Copyright(c) 2007-2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/igb/e1000_mac.h b/drivers/net/ethernet/intel/igb/e1000_mac.h index e2b2c4b9c95..e6d6ce43326 100644 --- a/drivers/net/ethernet/intel/igb/e1000_mac.h +++ b/drivers/net/ethernet/intel/igb/e1000_mac.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2012 Intel Corporation. + Copyright(c) 2007-2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/igb/e1000_mbx.c b/drivers/net/ethernet/intel/igb/e1000_mbx.c index 5988b8958ba..38e0df35090 100644 --- a/drivers/net/ethernet/intel/igb/e1000_mbx.c +++ b/drivers/net/ethernet/intel/igb/e1000_mbx.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2012 Intel Corporation. + Copyright(c) 2007-2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/igb/e1000_mbx.h b/drivers/net/ethernet/intel/igb/e1000_mbx.h index dbcfa3d5cae..c13b56d9edb 100644 --- a/drivers/net/ethernet/intel/igb/e1000_mbx.h +++ b/drivers/net/ethernet/intel/igb/e1000_mbx.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2012 Intel Corporation. + Copyright(c) 2007-2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/igb/e1000_nvm.c b/drivers/net/ethernet/intel/igb/e1000_nvm.c index fbb7604db36..5b62adbe134 100644 --- a/drivers/net/ethernet/intel/igb/e1000_nvm.c +++ b/drivers/net/ethernet/intel/igb/e1000_nvm.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2012 Intel Corporation. + Copyright(c) 2007-2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/igb/e1000_nvm.h b/drivers/net/ethernet/intel/igb/e1000_nvm.h index 7012d458c6f..6bfc0c43aac 100644 --- a/drivers/net/ethernet/intel/igb/e1000_nvm.h +++ b/drivers/net/ethernet/intel/igb/e1000_nvm.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2012 Intel Corporation. + Copyright(c) 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.c b/drivers/net/ethernet/intel/igb/e1000_phy.c index fe76004aca4..2918c979b5b 100644 --- a/drivers/net/ethernet/intel/igb/e1000_phy.c +++ b/drivers/net/ethernet/intel/igb/e1000_phy.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2012 Intel Corporation. + Copyright(c) 2007-2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.h b/drivers/net/ethernet/intel/igb/e1000_phy.h index ed282f877d9..784fd1c4098 100644 --- a/drivers/net/ethernet/intel/igb/e1000_phy.h +++ b/drivers/net/ethernet/intel/igb/e1000_phy.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2012 Intel Corporation. + Copyright(c) 2007-2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/igb/e1000_regs.h b/drivers/net/ethernet/intel/igb/e1000_regs.h index e5db48594e8..15343286082 100644 --- a/drivers/net/ethernet/intel/igb/e1000_regs.h +++ b/drivers/net/ethernet/intel/igb/e1000_regs.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2012 Intel Corporation. + Copyright(c) 2007-2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -75,6 +75,14 @@ #define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */ #define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */ #define E1000_FCRTV 0x02460 /* Flow Control Refresh Timer Value - RW */ +#define E1000_I2CPARAMS 0x0102C /* SFPI2C Parameters Register - RW */ +#define E1000_I2CBB_EN 0x00000100 /* I2C - Bit Bang Enable */ +#define E1000_I2C_CLK_OUT 0x00000200 /* I2C- Clock */ +#define E1000_I2C_DATA_OUT 0x00000400 /* I2C- Data Out */ +#define E1000_I2C_DATA_OE_N 0x00000800 /* I2C- Data Output Enable */ +#define E1000_I2C_DATA_IN 0x00001000 /* I2C- Data In */ +#define E1000_I2C_CLK_OE_N 0x00002000 /* I2C- Clock Output Enable */ +#define E1000_I2C_CLK_IN 0x00004000 /* I2C- Clock In */ /* IEEE 1588 TIMESYNCH */ #define E1000_TSYNCRXCTL 0x0B620 /* Rx Time Sync Control register - RW */ @@ -124,6 +132,14 @@ /* Split and Replication RX Control - RW */ #define E1000_RXPBS 0x02404 /* Rx Packet Buffer Size - RW */ + +/* Thermal sensor configuration and status registers */ +#define E1000_THMJT 0x08100 /* Junction Temperature */ +#define E1000_THLOWTC 0x08104 /* Low Threshold Control */ +#define E1000_THMIDTC 0x08108 /* Mid Threshold Control */ +#define E1000_THHIGHTC 0x0810C /* High Threshold Control */ +#define E1000_THSTAT 0x08110 /* Thermal Sensor Status */ + /* * Convenience macros * diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h index 17f1686ee41..d27edbc6392 100644 --- a/drivers/net/ethernet/intel/igb/igb.h +++ b/drivers/net/ethernet/intel/igb/igb.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2012 Intel Corporation. + Copyright(c) 2007-2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -39,6 +39,8 @@ #include <linux/ptp_clock_kernel.h> #include <linux/bitops.h> #include <linux/if_vlan.h> +#include <linux/i2c.h> +#include <linux/i2c-algo-bit.h> struct igb_adapter; @@ -137,8 +139,6 @@ struct vf_data_storage { #define IGB_RX_HDR_LEN IGB_RXBUFFER_256 #define IGB_RX_BUFSZ IGB_RXBUFFER_2048 -/* How many Tx Descriptors do we need to call netif_wake_queue ? */ -#define IGB_TX_QUEUE_WAKE 16 /* How many Rx Buffers do we bundle into one write to the hardware ? */ #define IGB_RX_BUFFER_WRITE 16 /* Must be power of 2 */ @@ -167,6 +167,17 @@ enum igb_tx_flags { #define IGB_TX_FLAGS_VLAN_MASK 0xffff0000 #define IGB_TX_FLAGS_VLAN_SHIFT 16 +/* + * The largest size we can write to the descriptor is 65535. In order to + * maintain a power of two alignment we have to limit ourselves to 32K. + */ +#define IGB_MAX_TXD_PWR 15 +#define IGB_MAX_DATA_PER_TXD (1 << IGB_MAX_TXD_PWR) + +/* Tx Descriptors needed, worst case */ +#define TXD_USE_COUNT(S) DIV_ROUND_UP((S), IGB_MAX_DATA_PER_TXD) +#define DESC_NEEDED (MAX_SKB_FRAGS + 4) + /* wrapper around a pointer to a socket buffer, * so a DMA handle can be stored along with the buffer */ struct igb_tx_buffer { @@ -219,6 +230,7 @@ struct igb_ring { struct igb_tx_buffer *tx_buffer_info; struct igb_rx_buffer *rx_buffer_info; }; + unsigned long last_rx_timestamp; void *desc; /* descriptor ring memory */ unsigned long flags; /* ring specific flags */ void __iomem *tail; /* pointer to ring tail register */ @@ -272,10 +284,18 @@ struct igb_q_vector { enum e1000_ring_flags_t { IGB_RING_FLAG_RX_SCTP_CSUM, IGB_RING_FLAG_RX_LB_VLAN_BSWAP, + IGB_RING_FLAG_RX_BUILD_SKB_ENABLED, IGB_RING_FLAG_TX_CTX_IDX, IGB_RING_FLAG_TX_DETECT_HANG }; +#define ring_uses_build_skb(ring) \ + test_bit(IGB_RING_FLAG_RX_BUILD_SKB_ENABLED, &(ring)->flags) +#define set_ring_build_skb_enabled(ring) \ + set_bit(IGB_RING_FLAG_RX_BUILD_SKB_ENABLED, &(ring)->flags) +#define clear_ring_build_skb_enabled(ring) \ + clear_bit(IGB_RING_FLAG_RX_BUILD_SKB_ENABLED, &(ring)->flags) + #define IGB_TXD_DCMD (E1000_ADVTXD_DCMD_EOP | E1000_ADVTXD_DCMD_RS) #define IGB_RX_DESC(R, i) \ @@ -301,6 +321,32 @@ static inline int igb_desc_unused(struct igb_ring *ring) return ring->count + ring->next_to_clean - ring->next_to_use - 1; } +struct igb_i2c_client_list { + struct i2c_client *client; + struct igb_i2c_client_list *next; +}; + +#ifdef CONFIG_IGB_HWMON + +#define IGB_HWMON_TYPE_LOC 0 +#define IGB_HWMON_TYPE_TEMP 1 +#define IGB_HWMON_TYPE_CAUTION 2 +#define IGB_HWMON_TYPE_MAX 3 + +struct hwmon_attr { + struct device_attribute dev_attr; + struct e1000_hw *hw; + struct e1000_thermal_diode_data *sensor; + char name[12]; + }; + +struct hwmon_buff { + struct device *device; + struct hwmon_attr *hwmon_list; + unsigned int n_hwmon; + }; +#endif + /* board specific private data structure */ struct igb_adapter { unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)]; @@ -386,11 +432,22 @@ struct igb_adapter { struct delayed_work ptp_overflow_work; struct work_struct ptp_tx_work; struct sk_buff *ptp_tx_skb; + unsigned long ptp_tx_start; + unsigned long last_rx_ptp_check; spinlock_t tmreg_lock; struct cyclecounter cc; struct timecounter tc; + u32 tx_hwtstamp_timeouts; + u32 rx_hwtstamp_cleared; char fw_version[32]; +#ifdef CONFIG_IGB_HWMON + struct hwmon_buff igb_hwmon_buff; + bool ets; +#endif + struct i2c_algo_bit_data i2c_algo; + struct i2c_adapter i2c_adap; + struct igb_i2c_client_list *i2c_clients; }; #define IGB_FLAG_HAS_MSI (1 << 0) @@ -449,6 +506,7 @@ extern void igb_ptp_init(struct igb_adapter *adapter); extern void igb_ptp_stop(struct igb_adapter *adapter); extern void igb_ptp_reset(struct igb_adapter *adapter); extern void igb_ptp_tx_work(struct work_struct *work); +extern void igb_ptp_rx_hang(struct igb_adapter *adapter); extern void igb_ptp_tx_hwtstamp(struct igb_adapter *adapter); extern void igb_ptp_rx_rgtstamp(struct igb_q_vector *q_vector, struct sk_buff *skb); @@ -466,7 +524,10 @@ static inline void igb_ptp_rx_hwtstamp(struct igb_q_vector *q_vector, extern int igb_ptp_hwtstamp_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd); - +#ifdef CONFIG_IGB_HWMON +extern void igb_sysfs_exit(struct igb_adapter *adapter); +extern int igb_sysfs_init(struct igb_adapter *adapter); +#endif static inline s32 igb_reset_phy(struct e1000_hw *hw) { if (hw->phy.ops.reset) diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c index bfe9208c4b1..a3830a8ba4c 100644 --- a/drivers/net/ethernet/intel/igb/igb_ethtool.c +++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2012 Intel Corporation. + Copyright(c) 2007-2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -92,6 +92,8 @@ static const struct igb_stats igb_gstrings_stats[] = { IGB_STAT("os2bmc_tx_by_bmc", stats.b2ospc), IGB_STAT("os2bmc_tx_by_host", stats.o2bspc), IGB_STAT("os2bmc_rx_by_host", stats.b2ogprc), + IGB_STAT("tx_hwtstamp_timeouts", tx_hwtstamp_timeouts), + IGB_STAT("rx_hwtstamp_cleared", rx_hwtstamp_cleared), }; #define IGB_NETDEV_STAT(_net_stat) { \ @@ -1889,7 +1891,7 @@ static int igb_link_test(struct igb_adapter *adapter, u64 *data) } else { hw->mac.ops.check_for_link(&adapter->hw); if (hw->mac.autoneg) - msleep(4000); + msleep(5000); if (!(rd32(E1000_STATUS) & E1000_STATUS_LU)) *data = 1; @@ -2272,12 +2274,21 @@ static int igb_get_ts_info(struct net_device *dev, struct igb_adapter *adapter = netdev_priv(dev); switch (adapter->hw.mac.type) { + case e1000_82575: + info->so_timestamping = + SOF_TIMESTAMPING_TX_SOFTWARE | + SOF_TIMESTAMPING_RX_SOFTWARE | + SOF_TIMESTAMPING_SOFTWARE; + return 0; case e1000_82576: case e1000_82580: case e1000_i350: case e1000_i210: case e1000_i211: info->so_timestamping = + SOF_TIMESTAMPING_TX_SOFTWARE | + SOF_TIMESTAMPING_RX_SOFTWARE | + SOF_TIMESTAMPING_SOFTWARE | SOF_TIMESTAMPING_TX_HARDWARE | SOF_TIMESTAMPING_RX_HARDWARE | SOF_TIMESTAMPING_RAW_HARDWARE; diff --git a/drivers/net/ethernet/intel/igb/igb_hwmon.c b/drivers/net/ethernet/intel/igb/igb_hwmon.c new file mode 100644 index 00000000000..0a9b073d0b0 --- /dev/null +++ b/drivers/net/ethernet/intel/igb/igb_hwmon.c @@ -0,0 +1,242 @@ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include "igb.h" +#include "e1000_82575.h" +#include "e1000_hw.h" + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/sysfs.h> +#include <linux/kobject.h> +#include <linux/device.h> +#include <linux/netdevice.h> +#include <linux/hwmon.h> +#include <linux/pci.h> + +#ifdef CONFIG_IGB_HWMON +/* hwmon callback functions */ +static ssize_t igb_hwmon_show_location(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct hwmon_attr *igb_attr = container_of(attr, struct hwmon_attr, + dev_attr); + return sprintf(buf, "loc%u\n", + igb_attr->sensor->location); +} + +static ssize_t igb_hwmon_show_temp(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct hwmon_attr *igb_attr = container_of(attr, struct hwmon_attr, + dev_attr); + unsigned int value; + + /* reset the temp field */ + igb_attr->hw->mac.ops.get_thermal_sensor_data(igb_attr->hw); + + value = igb_attr->sensor->temp; + + /* display millidegree */ + value *= 1000; + + return sprintf(buf, "%u\n", value); +} + +static ssize_t igb_hwmon_show_cautionthresh(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct hwmon_attr *igb_attr = container_of(attr, struct hwmon_attr, + dev_attr); + unsigned int value = igb_attr->sensor->caution_thresh; + + /* display millidegree */ + value *= 1000; + + return sprintf(buf, "%u\n", value); +} + +static ssize_t igb_hwmon_show_maxopthresh(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct hwmon_attr *igb_attr = container_of(attr, struct hwmon_attr, + dev_attr); + unsigned int value = igb_attr->sensor->max_op_thresh; + + /* display millidegree */ + value *= 1000; + + return sprintf(buf, "%u\n", value); +} + +/* igb_add_hwmon_attr - Create hwmon attr table for a hwmon sysfs file. + * @ adapter: pointer to the adapter structure + * @ offset: offset in the eeprom sensor data table + * @ type: type of sensor data to display + * + * For each file we want in hwmon's sysfs interface we need a device_attribute + * This is included in our hwmon_attr struct that contains the references to + * the data structures we need to get the data to display. + */ +static int igb_add_hwmon_attr(struct igb_adapter *adapter, + unsigned int offset, int type) { + int rc; + unsigned int n_attr; + struct hwmon_attr *igb_attr; + + n_attr = adapter->igb_hwmon_buff.n_hwmon; + igb_attr = &adapter->igb_hwmon_buff.hwmon_list[n_attr]; + + switch (type) { + case IGB_HWMON_TYPE_LOC: + igb_attr->dev_attr.show = igb_hwmon_show_location; + snprintf(igb_attr->name, sizeof(igb_attr->name), + "temp%u_label", offset); + break; + case IGB_HWMON_TYPE_TEMP: + igb_attr->dev_attr.show = igb_hwmon_show_temp; + snprintf(igb_attr->name, sizeof(igb_attr->name), + "temp%u_input", offset); + break; + case IGB_HWMON_TYPE_CAUTION: + igb_attr->dev_attr.show = igb_hwmon_show_cautionthresh; + snprintf(igb_attr->name, sizeof(igb_attr->name), + "temp%u_max", offset); + break; + case IGB_HWMON_TYPE_MAX: + igb_attr->dev_attr.show = igb_hwmon_show_maxopthresh; + snprintf(igb_attr->name, sizeof(igb_attr->name), + "temp%u_crit", offset); + break; + default: + rc = -EPERM; + return rc; + } + + /* These always the same regardless of type */ + igb_attr->sensor = + &adapter->hw.mac.thermal_sensor_data.sensor[offset]; + igb_attr->hw = &adapter->hw; + igb_attr->dev_attr.store = NULL; + igb_attr->dev_attr.attr.mode = S_IRUGO; + igb_attr->dev_attr.attr.name = igb_attr->name; + sysfs_attr_init(&igb_attr->dev_attr.attr); + rc = device_create_file(&adapter->pdev->dev, + &igb_attr->dev_attr); + if (rc == 0) + ++adapter->igb_hwmon_buff.n_hwmon; + + return rc; +} + +static void igb_sysfs_del_adapter(struct igb_adapter *adapter) +{ + int i; + + if (adapter == NULL) + return; + + for (i = 0; i < adapter->igb_hwmon_buff.n_hwmon; i++) { + device_remove_file(&adapter->pdev->dev, + &adapter->igb_hwmon_buff.hwmon_list[i].dev_attr); + } + + kfree(adapter->igb_hwmon_buff.hwmon_list); + + if (adapter->igb_hwmon_buff.device) + hwmon_device_unregister(adapter->igb_hwmon_buff.device); +} + +/* called from igb_main.c */ +void igb_sysfs_exit(struct igb_adapter *adapter) +{ + igb_sysfs_del_adapter(adapter); +} + +/* called from igb_main.c */ +int igb_sysfs_init(struct igb_adapter *adapter) +{ + struct hwmon_buff *igb_hwmon = &adapter->igb_hwmon_buff; + unsigned int i; + int n_attrs; + int rc = 0; + + /* If this method isn't defined we don't support thermals */ + if (adapter->hw.mac.ops.init_thermal_sensor_thresh == NULL) + goto exit; + + /* Don't create thermal hwmon interface if no sensors present */ + rc = (adapter->hw.mac.ops.init_thermal_sensor_thresh(&adapter->hw)); + if (rc) + goto exit; + + /* Allocation space for max attributes + * max num sensors * values (loc, temp, max, caution) + */ + n_attrs = E1000_MAX_SENSORS * 4; + igb_hwmon->hwmon_list = kcalloc(n_attrs, sizeof(struct hwmon_attr), + GFP_KERNEL); + if (!igb_hwmon->hwmon_list) { + rc = -ENOMEM; + goto err; + } + + igb_hwmon->device = hwmon_device_register(&adapter->pdev->dev); + if (IS_ERR(igb_hwmon->device)) { + rc = PTR_ERR(igb_hwmon->device); + goto err; + } + + for (i = 0; i < E1000_MAX_SENSORS; i++) { + + /* Only create hwmon sysfs entries for sensors that have + * meaningful data. + */ + if (adapter->hw.mac.thermal_sensor_data.sensor[i].location == 0) + continue; + + /* Bail if any hwmon attr struct fails to initialize */ + rc = igb_add_hwmon_attr(adapter, i, IGB_HWMON_TYPE_CAUTION); + rc |= igb_add_hwmon_attr(adapter, i, IGB_HWMON_TYPE_LOC); + rc |= igb_add_hwmon_attr(adapter, i, IGB_HWMON_TYPE_TEMP); + rc |= igb_add_hwmon_attr(adapter, i, IGB_HWMON_TYPE_MAX); + if (rc) + goto err; + } + + goto exit; + +err: + igb_sysfs_del_adapter(adapter); +exit: + return rc; +} +#endif diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 31cfe2ec75d..ed79a1c53b5 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2012 Intel Corporation. + Copyright(c) 2007-2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -57,6 +57,7 @@ #ifdef CONFIG_IGB_DCA #include <linux/dca.h> #endif +#include <linux/i2c.h> #include "igb.h" #define MAJ 4 @@ -68,7 +69,8 @@ char igb_driver_name[] = "igb"; char igb_driver_version[] = DRV_VERSION; static const char igb_driver_string[] = "Intel(R) Gigabit Ethernet Network Driver"; -static const char igb_copyright[] = "Copyright (c) 2007-2012 Intel Corporation."; +static const char igb_copyright[] = + "Copyright (c) 2007-2013 Intel Corporation."; static const struct e1000_info *igb_info_tbl[] = { [board_82575] = &e1000_82575_info, @@ -193,6 +195,7 @@ static const struct dev_pm_ops igb_pm_ops = { }; #endif static void igb_shutdown(struct pci_dev *); +static int igb_pci_sriov_configure(struct pci_dev *dev, int num_vfs); #ifdef CONFIG_IGB_DCA static int igb_notify_dca(struct notifier_block *, unsigned long, void *); static struct notifier_block dca_notifier = { @@ -234,6 +237,7 @@ static struct pci_driver igb_driver = { .driver.pm = &igb_pm_ops, #endif .shutdown = igb_shutdown, + .sriov_configure = igb_pci_sriov_configure, .err_handler = &igb_err_handler }; @@ -565,6 +569,91 @@ exit: return; } +/* igb_get_i2c_data - Reads the I2C SDA data bit + * @hw: pointer to hardware structure + * @i2cctl: Current value of I2CCTL register + * + * Returns the I2C data bit value + */ +static int igb_get_i2c_data(void *data) +{ + struct igb_adapter *adapter = (struct igb_adapter *)data; + struct e1000_hw *hw = &adapter->hw; + s32 i2cctl = rd32(E1000_I2CPARAMS); + + return ((i2cctl & E1000_I2C_DATA_IN) != 0); +} + +/* igb_set_i2c_data - Sets the I2C data bit + * @data: pointer to hardware structure + * @state: I2C data value (0 or 1) to set + * + * Sets the I2C data bit + */ +static void igb_set_i2c_data(void *data, int state) +{ + struct igb_adapter *adapter = (struct igb_adapter *)data; + struct e1000_hw *hw = &adapter->hw; + s32 i2cctl = rd32(E1000_I2CPARAMS); + + if (state) + i2cctl |= E1000_I2C_DATA_OUT; + else + i2cctl &= ~E1000_I2C_DATA_OUT; + + i2cctl &= ~E1000_I2C_DATA_OE_N; + i2cctl |= E1000_I2C_CLK_OE_N; + wr32(E1000_I2CPARAMS, i2cctl); + wrfl(); + +} + +/* igb_set_i2c_clk - Sets the I2C SCL clock + * @data: pointer to hardware structure + * @state: state to set clock + * + * Sets the I2C clock line to state + */ +static void igb_set_i2c_clk(void *data, int state) +{ + struct igb_adapter *adapter = (struct igb_adapter *)data; + struct e1000_hw *hw = &adapter->hw; + s32 i2cctl = rd32(E1000_I2CPARAMS); + + if (state) { + i2cctl |= E1000_I2C_CLK_OUT; + i2cctl &= ~E1000_I2C_CLK_OE_N; + } else { + i2cctl &= ~E1000_I2C_CLK_OUT; + i2cctl &= ~E1000_I2C_CLK_OE_N; + } + wr32(E1000_I2CPARAMS, i2cctl); + wrfl(); +} + +/* igb_get_i2c_clk - Gets the I2C SCL clock state + * @data: pointer to hardware structure + * + * Gets the I2C clock state + */ +static int igb_get_i2c_clk(void *data) +{ + struct igb_adapter *adapter = (struct igb_adapter *)data; + struct e1000_hw *hw = &adapter->hw; + s32 i2cctl = rd32(E1000_I2CPARAMS); + + return ((i2cctl & E1000_I2C_CLK_IN) != 0); +} + +static const struct i2c_algo_bit_data igb_i2c_algo = { + .setsda = igb_set_i2c_data, + .setscl = igb_set_i2c_clk, + .getsda = igb_get_i2c_data, + .getscl = igb_get_i2c_clk, + .udelay = 5, + .timeout = 20, +}; + /** * igb_get_hw_dev - return device * used by hardware layer to print debugging information @@ -1708,6 +1797,18 @@ void igb_reset(struct igb_adapter *adapter) igb_force_mac_fc(hw); igb_init_dmac(adapter, pba); +#ifdef CONFIG_IGB_HWMON + /* Re-initialize the thermal sensor on i350 devices. */ + if (!test_bit(__IGB_DOWN, &adapter->state)) { + if (mac->type == e1000_i350 && hw->bus.func == 0) { + /* If present, re-initialize the external thermal sensor + * interface. + */ + if (adapter->ets) + mac->ops.init_thermal_sensor_thresh(hw); + } + } +#endif if (!netif_running(adapter->netdev)) igb_power_down_link(adapter); @@ -1822,6 +1923,37 @@ void igb_set_fw_version(struct igb_adapter *adapter) return; } +static const struct i2c_board_info i350_sensor_info = { + I2C_BOARD_INFO("i350bb", 0Xf8), +}; + +/* igb_init_i2c - Init I2C interface + * @adapter: pointer to adapter structure + * + */ +static s32 igb_init_i2c(struct igb_adapter *adapter) +{ + s32 status = E1000_SUCCESS; + + /* I2C interface supported on i350 devices */ + if (adapter->hw.mac.type != e1000_i350) + return E1000_SUCCESS; + + /* Initialize the i2c bus which is controlled by the registers. + * This bus will use the i2c_algo_bit structue that implements + * the protocol through toggling of the 4 bits in the register. + */ + adapter->i2c_adap.owner = THIS_MODULE; + adapter->i2c_algo = igb_i2c_algo; + adapter->i2c_algo.data = adapter; + adapter->i2c_adap.algo_data = &adapter->i2c_algo; + adapter->i2c_adap.dev.parent = &adapter->pdev->dev; + strlcpy(adapter->i2c_adap.name, "igb BB", + sizeof(adapter->i2c_adap.name)); + status = i2c_bit_add_bus(&adapter->i2c_adap); + return status; +} + /** * igb_probe - Device Initialization Routine * @pdev: PCI device information struct @@ -2022,9 +2154,8 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) dev_err(&pdev->dev, "NVM Read Error\n"); memcpy(netdev->dev_addr, hw->mac.addr, netdev->addr_len); - memcpy(netdev->perm_addr, hw->mac.addr, netdev->addr_len); - if (!is_valid_ether_addr(netdev->perm_addr)) { + if (!is_valid_ether_addr(netdev->dev_addr)) { dev_err(&pdev->dev, "Invalid MAC Address\n"); err = -EIO; goto err_eeprom; @@ -2115,6 +2246,13 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* reset the hardware with the new settings */ igb_reset(adapter); + /* Init the I2C interface */ + err = igb_init_i2c(adapter); + if (err) { + dev_err(&pdev->dev, "failed to init i2c interface\n"); + goto err_eeprom; + } + /* let the f/w know that the h/w is now under the control of the * driver. */ igb_get_hw_control(adapter); @@ -2135,7 +2273,27 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } #endif +#ifdef CONFIG_IGB_HWMON + /* Initialize the thermal sensor on i350 devices. */ + if (hw->mac.type == e1000_i350 && hw->bus.func == 0) { + u16 ets_word; + /* + * Read the NVM to determine if this i350 device supports an + * external thermal sensor. + */ + hw->nvm.ops.read(hw, NVM_ETS_CFG, 1, &ets_word); + if (ets_word != 0x0000 && ets_word != 0xFFFF) + adapter->ets = true; + else + adapter->ets = false; + if (igb_sysfs_init(adapter)) + dev_err(&pdev->dev, + "failed to allocate sysfs resources\n"); + } else { + adapter->ets = false; + } +#endif /* do hw tstamp init after resetting */ igb_ptp_init(adapter); @@ -2176,6 +2334,7 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) err_register: igb_release_hw_control(adapter); + memset(&adapter->i2c_adap, 0, sizeof(adapter->i2c_adap)); err_eeprom: if (!igb_check_reset_block(hw)) igb_reset_phy(hw); @@ -2196,6 +2355,111 @@ err_dma: return err; } +#ifdef CONFIG_PCI_IOV +static int igb_disable_sriov(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + /* reclaim resources allocated to VFs */ + if (adapter->vf_data) { + /* disable iov and allow time for transactions to clear */ + if (igb_vfs_are_assigned(adapter)) { + dev_warn(&pdev->dev, + "Cannot deallocate SR-IOV virtual functions while they are assigned - VFs will not be deallocated\n"); + return -EPERM; + } else { + pci_disable_sriov(pdev); + msleep(500); + } + + kfree(adapter->vf_data); + adapter->vf_data = NULL; + adapter->vfs_allocated_count = 0; + wr32(E1000_IOVCTL, E1000_IOVCTL_REUSE_VFQ); + wrfl(); + msleep(100); + dev_info(&pdev->dev, "IOV Disabled\n"); + + /* Re-enable DMA Coalescing flag since IOV is turned off */ + adapter->flags |= IGB_FLAG_DMAC; + } + + return 0; +} + +static int igb_enable_sriov(struct pci_dev *pdev, int num_vfs) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct igb_adapter *adapter = netdev_priv(netdev); + int old_vfs = pci_num_vf(pdev); + int err = 0; + int i; + + if (!num_vfs) + goto out; + else if (old_vfs && old_vfs == num_vfs) + goto out; + else if (old_vfs && old_vfs != num_vfs) + err = igb_disable_sriov(pdev); + + if (err) + goto out; + + if (num_vfs > 7) { + err = -EPERM; + goto out; + } + + adapter->vfs_allocated_count = num_vfs; + + adapter->vf_data = kcalloc(adapter->vfs_allocated_count, + sizeof(struct vf_data_storage), GFP_KERNEL); + + /* if allocation failed then we do not support SR-IOV */ + if (!adapter->vf_data) { + adapter->vfs_allocated_count = 0; + dev_err(&pdev->dev, + "Unable to allocate memory for VF Data Storage\n"); + err = -ENOMEM; + goto out; + } + + err = pci_enable_sriov(pdev, adapter->vfs_allocated_count); + if (err) + goto err_out; + + dev_info(&pdev->dev, "%d VFs allocated\n", + adapter->vfs_allocated_count); + for (i = 0; i < adapter->vfs_allocated_count; i++) + igb_vf_configure(adapter, i); + + /* DMA Coalescing is not supported in IOV mode. */ + adapter->flags &= ~IGB_FLAG_DMAC; + goto out; + +err_out: + kfree(adapter->vf_data); + adapter->vf_data = NULL; + adapter->vfs_allocated_count = 0; +out: + return err; +} + +#endif +/* + * igb_remove_i2c - Cleanup I2C interface + * @adapter: pointer to adapter structure + * + */ +static void igb_remove_i2c(struct igb_adapter *adapter) +{ + + /* free the adapter bus structure */ + i2c_del_adapter(&adapter->i2c_adap); +} + /** * igb_remove - Device Removal Routine * @pdev: PCI device information struct @@ -2212,8 +2476,11 @@ static void igb_remove(struct pci_dev *pdev) struct e1000_hw *hw = &adapter->hw; pm_runtime_get_noresume(&pdev->dev); +#ifdef CONFIG_IGB_HWMON + igb_sysfs_exit(adapter); +#endif + igb_remove_i2c(adapter); igb_ptp_stop(adapter); - /* * The watchdog timer may be rescheduled, so explicitly * disable watchdog from being rescheduled. @@ -2243,23 +2510,7 @@ static void igb_remove(struct pci_dev *pdev) igb_clear_interrupt_scheme(adapter); #ifdef CONFIG_PCI_IOV - /* reclaim resources allocated to VFs */ - if (adapter->vf_data) { - /* disable iov and allow time for transactions to clear */ - if (igb_vfs_are_assigned(adapter)) { - dev_info(&pdev->dev, "Unloading driver while VFs are assigned - VFs will not be deallocated\n"); - } else { - pci_disable_sriov(pdev); - msleep(500); - } - - kfree(adapter->vf_data); - adapter->vf_data = NULL; - wr32(E1000_IOVCTL, E1000_IOVCTL_REUSE_VFQ); - wrfl(); - msleep(100); - dev_info(&pdev->dev, "IOV Disabled\n"); - } + igb_disable_sriov(pdev); #endif iounmap(hw->hw_addr); @@ -2290,103 +2541,22 @@ static void igb_probe_vfs(struct igb_adapter *adapter) #ifdef CONFIG_PCI_IOV struct pci_dev *pdev = adapter->pdev; struct e1000_hw *hw = &adapter->hw; - int old_vfs = pci_num_vf(adapter->pdev); - int i; /* Virtualization features not supported on i210 family. */ if ((hw->mac.type == e1000_i210) || (hw->mac.type == e1000_i211)) return; - if (old_vfs) { - dev_info(&pdev->dev, "%d pre-allocated VFs found - override " - "max_vfs setting of %d\n", old_vfs, max_vfs); - adapter->vfs_allocated_count = old_vfs; - } - - if (!adapter->vfs_allocated_count) - return; - - adapter->vf_data = kcalloc(adapter->vfs_allocated_count, - sizeof(struct vf_data_storage), GFP_KERNEL); - - /* if allocation failed then we do not support SR-IOV */ - if (!adapter->vf_data) { - adapter->vfs_allocated_count = 0; - dev_err(&pdev->dev, "Unable to allocate memory for VF " - "Data Storage\n"); - goto out; - } - - if (!old_vfs) { - if (pci_enable_sriov(pdev, adapter->vfs_allocated_count)) - goto err_out; - } - dev_info(&pdev->dev, "%d VFs allocated\n", - adapter->vfs_allocated_count); - for (i = 0; i < adapter->vfs_allocated_count; i++) - igb_vf_configure(adapter, i); + igb_enable_sriov(pdev, max_vfs); + pci_sriov_set_totalvfs(pdev, 7); - /* DMA Coalescing is not supported in IOV mode. */ - adapter->flags &= ~IGB_FLAG_DMAC; - goto out; -err_out: - kfree(adapter->vf_data); - adapter->vf_data = NULL; - adapter->vfs_allocated_count = 0; -out: - return; #endif /* CONFIG_PCI_IOV */ } -/** - * igb_sw_init - Initialize general software structures (struct igb_adapter) - * @adapter: board private structure to initialize - * - * igb_sw_init initializes the Adapter private data structure. - * Fields are initialized based on PCI device information and - * OS network device settings (MTU size). - **/ -static int igb_sw_init(struct igb_adapter *adapter) +static void igb_init_queue_configuration(struct igb_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; - struct net_device *netdev = adapter->netdev; - struct pci_dev *pdev = adapter->pdev; u32 max_rss_queues; - pci_read_config_word(pdev, PCI_COMMAND, &hw->bus.pci_cmd_word); - - /* set default ring sizes */ - adapter->tx_ring_count = IGB_DEFAULT_TXD; - adapter->rx_ring_count = IGB_DEFAULT_RXD; - - /* set default ITR values */ - adapter->rx_itr_setting = IGB_DEFAULT_ITR; - adapter->tx_itr_setting = IGB_DEFAULT_ITR; - - /* set default work limits */ - adapter->tx_work_limit = IGB_DEFAULT_TX_WORK; - - adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN + - VLAN_HLEN; - adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN; - - spin_lock_init(&adapter->stats64_lock); -#ifdef CONFIG_PCI_IOV - switch (hw->mac.type) { - case e1000_82576: - case e1000_i350: - if (max_vfs > 7) { - dev_warn(&pdev->dev, - "Maximum of 7 VFs per PF, using max\n"); - adapter->vfs_allocated_count = 7; - } else - adapter->vfs_allocated_count = max_vfs; - break; - default: - break; - } -#endif /* CONFIG_PCI_IOV */ - /* Determine the maximum number of RSS queues supported. */ switch (hw->mac.type) { case e1000_i211: @@ -2445,11 +2615,64 @@ static int igb_sw_init(struct igb_adapter *adapter) adapter->flags |= IGB_FLAG_QUEUE_PAIRS; break; } +} + +/** + * igb_sw_init - Initialize general software structures (struct igb_adapter) + * @adapter: board private structure to initialize + * + * igb_sw_init initializes the Adapter private data structure. + * Fields are initialized based on PCI device information and + * OS network device settings (MTU size). + **/ +static int igb_sw_init(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + + pci_read_config_word(pdev, PCI_COMMAND, &hw->bus.pci_cmd_word); + + /* set default ring sizes */ + adapter->tx_ring_count = IGB_DEFAULT_TXD; + adapter->rx_ring_count = IGB_DEFAULT_RXD; + + /* set default ITR values */ + adapter->rx_itr_setting = IGB_DEFAULT_ITR; + adapter->tx_itr_setting = IGB_DEFAULT_ITR; + + /* set default work limits */ + adapter->tx_work_limit = IGB_DEFAULT_TX_WORK; + + adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN + + VLAN_HLEN; + adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN; + + spin_lock_init(&adapter->stats64_lock); +#ifdef CONFIG_PCI_IOV + switch (hw->mac.type) { + case e1000_82576: + case e1000_i350: + if (max_vfs > 7) { + dev_warn(&pdev->dev, + "Maximum of 7 VFs per PF, using max\n"); + adapter->vfs_allocated_count = 7; + } else + adapter->vfs_allocated_count = max_vfs; + if (adapter->vfs_allocated_count) + dev_warn(&pdev->dev, + "Enabling SR-IOV VFs using the module parameter is deprecated - please use the pci sysfs interface.\n"); + break; + default: + break; + } +#endif /* CONFIG_PCI_IOV */ + + igb_init_queue_configuration(adapter); /* Setup and initialize a copy of the hw vlan table array */ - adapter->shadow_vfta = kzalloc(sizeof(u32) * - E1000_VLAN_FILTER_TBL_SIZE, - GFP_ATOMIC); + adapter->shadow_vfta = kcalloc(E1000_VLAN_FILTER_TBL_SIZE, sizeof(u32), + GFP_ATOMIC); /* This call may decrease the number of queues */ if (igb_init_interrupt_scheme(adapter, true)) { @@ -3131,6 +3354,20 @@ void igb_configure_rx_ring(struct igb_adapter *adapter, wr32(E1000_RXDCTL(reg_idx), rxdctl); } +static void igb_set_rx_buffer_len(struct igb_adapter *adapter, + struct igb_ring *rx_ring) +{ +#define IGB_MAX_BUILD_SKB_SIZE \ + (SKB_WITH_OVERHEAD(IGB_RX_BUFSZ) - \ + (NET_SKB_PAD + NET_IP_ALIGN + IGB_TS_HDR_LEN)) + + /* set build_skb flag */ + if (adapter->max_frame_size <= IGB_MAX_BUILD_SKB_SIZE) + set_ring_build_skb_enabled(rx_ring); + else + clear_ring_build_skb_enabled(rx_ring); +} + /** * igb_configure_rx - Configure receive Unit after Reset * @adapter: board private structure @@ -3150,8 +3387,11 @@ static void igb_configure_rx(struct igb_adapter *adapter) /* Setup the HW Rx Head and Tail Descriptor Pointers and * the Base and Length of the Rx Descriptor Ring */ - for (i = 0; i < adapter->num_rx_queues; i++) - igb_configure_rx_ring(adapter, adapter->rx_ring[i]); + for (i = 0; i < adapter->num_rx_queues; i++) { + struct igb_ring *rx_ring = adapter->rx_ring[i]; + igb_set_rx_buffer_len(adapter, rx_ring); + igb_configure_rx_ring(adapter, rx_ring); + } } /** @@ -3768,6 +4008,7 @@ static void igb_watchdog_task(struct work_struct *work) } igb_spoof_check(adapter); + igb_ptp_rx_hang(adapter); /* Reset the timer */ if (!test_bit(__IGB_DOWN, &adapter->state)) @@ -4193,13 +4434,6 @@ static void igb_tx_olinfo_status(struct igb_ring *tx_ring, tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status); } -/* - * The largest size we can write to the descriptor is 65535. In order to - * maintain a power of two alignment we have to limit ourselves to 32K. - */ -#define IGB_MAX_TXD_PWR 15 -#define IGB_MAX_DATA_PER_TXD (1<<IGB_MAX_TXD_PWR) - static void igb_tx_map(struct igb_ring *tx_ring, struct igb_tx_buffer *first, const u8 hdr_len) @@ -4368,15 +4602,25 @@ netdev_tx_t igb_xmit_frame_ring(struct sk_buff *skb, struct igb_tx_buffer *first; int tso; u32 tx_flags = 0; + u16 count = TXD_USE_COUNT(skb_headlen(skb)); __be16 protocol = vlan_get_protocol(skb); u8 hdr_len = 0; - /* need: 1 descriptor per page, + /* need: 1 descriptor per page * PAGE_SIZE/IGB_MAX_DATA_PER_TXD, + * + 1 desc for skb_headlen/IGB_MAX_DATA_PER_TXD, * + 2 desc gap to keep tail from touching head, - * + 1 desc for skb->data, * + 1 desc for context descriptor, - * otherwise try next time */ - if (igb_maybe_stop_tx(tx_ring, skb_shinfo(skb)->nr_frags + 4)) { + * otherwise try next time + */ + if (NETDEV_FRAG_PAGE_MAX_SIZE > IGB_MAX_DATA_PER_TXD) { + unsigned short f; + for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) + count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size); + } else { + count += skb_shinfo(skb)->nr_frags; + } + + if (igb_maybe_stop_tx(tx_ring, count + 3)) { /* this is a hard error */ return NETDEV_TX_BUSY; } @@ -4387,12 +4631,15 @@ netdev_tx_t igb_xmit_frame_ring(struct sk_buff *skb, first->bytecount = skb->len; first->gso_segs = 1; + skb_tx_timestamp(skb); + if (unlikely((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) && !(adapter->ptp_tx_skb))) { skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; tx_flags |= IGB_TX_FLAGS_TSTAMP; adapter->ptp_tx_skb = skb_get(skb); + adapter->ptp_tx_start = jiffies; if (adapter->hw.mac.type == e1000_82576) schedule_work(&adapter->ptp_tx_work); } @@ -4415,7 +4662,7 @@ netdev_tx_t igb_xmit_frame_ring(struct sk_buff *skb, igb_tx_map(tx_ring, first, hdr_len); /* Make sure there is space in the ring for the next send. */ - igb_maybe_stop_tx(tx_ring, MAX_SKB_FRAGS + 4); + igb_maybe_stop_tx(tx_ring, DESC_NEEDED); return NETDEV_TX_OK; @@ -4969,7 +5216,7 @@ static int igb_vf_configure(struct igb_adapter *adapter, int vf) { unsigned char mac_addr[ETH_ALEN]; - eth_random_addr(mac_addr); + eth_zero_addr(mac_addr); igb_set_vf_mac(adapter, vf, mac_addr); return 0; @@ -5322,9 +5569,9 @@ static void igb_vf_reset_event(struct igb_adapter *adapter, u32 vf) { unsigned char *vf_mac = adapter->vf_data[vf].vf_mac_addresses; - /* generate a new mac address as we were hotplug removed/added */ + /* clear mac address as we were hotplug removed/added */ if (!(adapter->vf_data[vf].flags & IGB_VF_FLAG_PF_SET_MAC)) - eth_random_addr(vf_mac); + eth_zero_addr(vf_mac); /* process remaining reset events */ igb_vf_reset(adapter, vf); @@ -5703,7 +5950,7 @@ static bool igb_clean_tx_irq(struct igb_q_vector *q_vector) break; /* prevent any other reads prior to eop_desc */ - rmb(); + read_barrier_depends(); /* if DD is not set pending work has not been completed */ if (!(eop_desc->wb.status & cpu_to_le32(E1000_TXD_STAT_DD))) @@ -5819,9 +6066,10 @@ static bool igb_clean_tx_irq(struct igb_q_vector *q_vector) } } +#define TX_WAKE_THRESHOLD (DESC_NEEDED * 2) if (unlikely(total_packets && netif_carrier_ok(tx_ring->netdev) && - igb_desc_unused(tx_ring) >= IGB_TX_QUEUE_WAKE)) { + igb_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD)) { /* Make sure that anybody stopping the queue after this * sees the new next_to_clean. */ @@ -5870,6 +6118,41 @@ static void igb_reuse_rx_page(struct igb_ring *rx_ring, DMA_FROM_DEVICE); } +static bool igb_can_reuse_rx_page(struct igb_rx_buffer *rx_buffer, + struct page *page, + unsigned int truesize) +{ + /* avoid re-using remote pages */ + if (unlikely(page_to_nid(page) != numa_node_id())) + return false; + +#if (PAGE_SIZE < 8192) + /* if we are only owner of page we can reuse it */ + if (unlikely(page_count(page) != 1)) + return false; + + /* flip page offset to other buffer */ + rx_buffer->page_offset ^= IGB_RX_BUFSZ; + + /* since we are the only owner of the page and we need to + * increment it, just set the value to 2 in order to avoid + * an unnecessary locked operation + */ + atomic_set(&page->_count, 2); +#else + /* move offset up to the next cache line */ + rx_buffer->page_offset += truesize; + + if (rx_buffer->page_offset > (PAGE_SIZE - IGB_RX_BUFSZ)) + return false; + + /* bump ref count on page before it is given to the stack */ + get_page(page); +#endif + + return true; +} + /** * igb_add_rx_frag - Add contents of Rx buffer to sk_buff * @rx_ring: rx descriptor ring to transact packets on @@ -5892,6 +6175,11 @@ static bool igb_add_rx_frag(struct igb_ring *rx_ring, { struct page *page = rx_buffer->page; unsigned int size = le16_to_cpu(rx_desc->wb.upper.length); +#if (PAGE_SIZE < 8192) + unsigned int truesize = IGB_RX_BUFSZ; +#else + unsigned int truesize = ALIGN(size, L1_CACHE_BYTES); +#endif if ((size <= IGB_RX_HDR_LEN) && !skb_is_nonlinear(skb)) { unsigned char *va = page_address(page) + rx_buffer->page_offset; @@ -5914,38 +6202,88 @@ static bool igb_add_rx_frag(struct igb_ring *rx_ring, } skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page, - rx_buffer->page_offset, size, IGB_RX_BUFSZ); + rx_buffer->page_offset, size, truesize); - /* avoid re-using remote pages */ - if (unlikely(page_to_nid(page) != numa_node_id())) - return false; + return igb_can_reuse_rx_page(rx_buffer, page, truesize); +} +static struct sk_buff *igb_build_rx_buffer(struct igb_ring *rx_ring, + union e1000_adv_rx_desc *rx_desc) +{ + struct igb_rx_buffer *rx_buffer; + struct sk_buff *skb; + struct page *page; + void *page_addr; + unsigned int size = le16_to_cpu(rx_desc->wb.upper.length); #if (PAGE_SIZE < 8192) - /* if we are only owner of page we can reuse it */ - if (unlikely(page_count(page) != 1)) - return false; + unsigned int truesize = IGB_RX_BUFSZ; +#else + unsigned int truesize = SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) + + SKB_DATA_ALIGN(NET_SKB_PAD + + NET_IP_ALIGN + + size); +#endif - /* flip page offset to other buffer */ - rx_buffer->page_offset ^= IGB_RX_BUFSZ; + /* If we spanned a buffer we have a huge mess so test for it */ + BUG_ON(unlikely(!igb_test_staterr(rx_desc, E1000_RXD_STAT_EOP))); - /* - * since we are the only owner of the page and we need to - * increment it, just set the value to 2 in order to avoid - * an unnecessary locked operation - */ - atomic_set(&page->_count, 2); -#else - /* move offset up to the next cache line */ - rx_buffer->page_offset += SKB_DATA_ALIGN(size); + /* Guarantee this function can be used by verifying buffer sizes */ + BUILD_BUG_ON(SKB_WITH_OVERHEAD(IGB_RX_BUFSZ) < (NET_SKB_PAD + + NET_IP_ALIGN + + IGB_TS_HDR_LEN + + ETH_FRAME_LEN + + ETH_FCS_LEN)); - if (rx_buffer->page_offset > (PAGE_SIZE - IGB_RX_BUFSZ)) - return false; + rx_buffer = &rx_ring->rx_buffer_info[rx_ring->next_to_clean]; + page = rx_buffer->page; + prefetchw(page); - /* bump ref count on page before it is given to the stack */ - get_page(page); + page_addr = page_address(page) + rx_buffer->page_offset; + + /* prefetch first cache line of first page */ + prefetch(page_addr + NET_SKB_PAD + NET_IP_ALIGN); +#if L1_CACHE_BYTES < 128 + prefetch(page_addr + L1_CACHE_BYTES + NET_SKB_PAD + NET_IP_ALIGN); #endif - return true; + /* build an skb to around the page buffer */ + skb = build_skb(page_addr, truesize); + if (unlikely(!skb)) { + rx_ring->rx_stats.alloc_failed++; + return NULL; + } + + /* we are reusing so sync this buffer for CPU use */ + dma_sync_single_range_for_cpu(rx_ring->dev, + rx_buffer->dma, + rx_buffer->page_offset, + IGB_RX_BUFSZ, + DMA_FROM_DEVICE); + + /* update pointers within the skb to store the data */ + skb_reserve(skb, NET_IP_ALIGN + NET_SKB_PAD); + __skb_put(skb, size); + + /* pull timestamp out of packet data */ + if (igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TSIP)) { + igb_ptp_rx_pktstamp(rx_ring->q_vector, skb->data, skb); + __skb_pull(skb, IGB_TS_HDR_LEN); + } + + if (igb_can_reuse_rx_page(rx_buffer, page, truesize)) { + /* hand second half of page back to the ring */ + igb_reuse_rx_page(rx_ring, rx_buffer); + } else { + /* we are not reusing the buffer so unmap it */ + dma_unmap_page(rx_ring->dev, rx_buffer->dma, + PAGE_SIZE, DMA_FROM_DEVICE); + } + + /* clear contents of buffer_info */ + rx_buffer->dma = 0; + rx_buffer->page = NULL; + + return skb; } static struct sk_buff *igb_fetch_rx_buffer(struct igb_ring *rx_ring, @@ -5957,13 +6295,6 @@ static struct sk_buff *igb_fetch_rx_buffer(struct igb_ring *rx_ring, rx_buffer = &rx_ring->rx_buffer_info[rx_ring->next_to_clean]; - /* - * This memory barrier is needed to keep us from reading - * any other fields out of the rx_desc until we know the - * RXD_STAT_DD bit is set - */ - rmb(); - page = rx_buffer->page; prefetchw(page); @@ -6363,8 +6694,17 @@ static bool igb_clean_rx_irq(struct igb_q_vector *q_vector, const int budget) if (!igb_test_staterr(rx_desc, E1000_RXD_STAT_DD)) break; + /* This memory barrier is needed to keep us from reading + * any other fields out of the rx_desc until we know the + * RXD_STAT_DD bit is set + */ + rmb(); + /* retrieve a buffer from the ring */ - skb = igb_fetch_rx_buffer(rx_ring, rx_desc, skb); + if (ring_uses_build_skb(rx_ring)) + skb = igb_build_rx_buffer(rx_ring, rx_desc); + else + skb = igb_fetch_rx_buffer(rx_ring, rx_desc, skb); /* exit if we failed to retrieve a buffer */ if (!skb) @@ -6451,6 +6791,14 @@ static bool igb_alloc_mapped_page(struct igb_ring *rx_ring, return true; } +static inline unsigned int igb_rx_offset(struct igb_ring *rx_ring) +{ + if (ring_uses_build_skb(rx_ring)) + return NET_SKB_PAD + NET_IP_ALIGN; + else + return 0; +} + /** * igb_alloc_rx_buffers - Replace used receive buffers; packet split * @adapter: address of board private structure @@ -6477,7 +6825,9 @@ void igb_alloc_rx_buffers(struct igb_ring *rx_ring, u16 cleaned_count) * Refresh the desc even if buffer_addrs didn't change * because each write-back erases this info. */ - rx_desc->read.pkt_addr = cpu_to_le64(bi->dma + bi->page_offset); + rx_desc->read.pkt_addr = cpu_to_le64(bi->dma + + bi->page_offset + + igb_rx_offset(rx_ring)); rx_desc++; bi++; @@ -6903,6 +7253,72 @@ static void igb_shutdown(struct pci_dev *pdev) } } +#ifdef CONFIG_PCI_IOV +static int igb_sriov_reinit(struct pci_dev *dev) +{ + struct net_device *netdev = pci_get_drvdata(dev); + struct igb_adapter *adapter = netdev_priv(netdev); + struct pci_dev *pdev = adapter->pdev; + + rtnl_lock(); + + if (netif_running(netdev)) + igb_close(netdev); + + igb_clear_interrupt_scheme(adapter); + + igb_init_queue_configuration(adapter); + + if (igb_init_interrupt_scheme(adapter, true)) { + dev_err(&pdev->dev, "Unable to allocate memory for queues\n"); + return -ENOMEM; + } + + if (netif_running(netdev)) + igb_open(netdev); + + rtnl_unlock(); + + return 0; +} + +static int igb_pci_disable_sriov(struct pci_dev *dev) +{ + int err = igb_disable_sriov(dev); + + if (!err) + err = igb_sriov_reinit(dev); + + return err; +} + +static int igb_pci_enable_sriov(struct pci_dev *dev, int num_vfs) +{ + int err = igb_enable_sriov(dev, num_vfs); + + if (err) + goto out; + + err = igb_sriov_reinit(dev); + if (!err) + return num_vfs; + +out: + return err; +} + +#endif +static int igb_pci_sriov_configure(struct pci_dev *dev, int num_vfs) +{ +#ifdef CONFIG_PCI_IOV + if (num_vfs == 0) + return igb_pci_disable_sriov(dev); + else + return igb_pci_enable_sriov(dev, num_vfs); +#endif + return 0; +} + #ifdef CONFIG_NET_POLL_CONTROLLER /* * Polling 'interrupt' - used by things like netconsole to send skbs @@ -7308,4 +7724,133 @@ static void igb_init_dmac(struct igb_adapter *adapter, u32 pba) } } +static DEFINE_SPINLOCK(i2c_clients_lock); + +/* igb_get_i2c_client - returns matching client + * in adapters's client list. + * @adapter: adapter struct + * @dev_addr: device address of i2c needed. + */ +static struct i2c_client * +igb_get_i2c_client(struct igb_adapter *adapter, u8 dev_addr) +{ + ulong flags; + struct igb_i2c_client_list *client_list; + struct i2c_client *client = NULL; + struct i2c_board_info client_info = { + I2C_BOARD_INFO("igb", 0x00), + }; + + spin_lock_irqsave(&i2c_clients_lock, flags); + client_list = adapter->i2c_clients; + + /* See if we already have an i2c_client */ + while (client_list) { + if (client_list->client->addr == (dev_addr >> 1)) { + client = client_list->client; + goto exit; + } else { + client_list = client_list->next; + } + } + + /* no client_list found, create a new one */ + client_list = kzalloc(sizeof(*client_list), GFP_ATOMIC); + if (client_list == NULL) + goto exit; + + /* dev_addr passed to us is left-shifted by 1 bit + * i2c_new_device call expects it to be flush to the right. + */ + client_info.addr = dev_addr >> 1; + client_info.platform_data = adapter; + client_list->client = i2c_new_device(&adapter->i2c_adap, &client_info); + if (client_list->client == NULL) { + dev_info(&adapter->pdev->dev, + "Failed to create new i2c device..\n"); + goto err_no_client; + } + + /* insert new client at head of list */ + client_list->next = adapter->i2c_clients; + adapter->i2c_clients = client_list; + + client = client_list->client; + goto exit; + +err_no_client: + kfree(client_list); +exit: + spin_unlock_irqrestore(&i2c_clients_lock, flags); + return client; +} + +/* igb_read_i2c_byte - Reads 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to read + * @dev_addr: device address + * @data: value read + * + * Performs byte read operation over I2C interface at + * a specified device address. + */ +s32 igb_read_i2c_byte(struct e1000_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data) +{ + struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw); + struct i2c_client *this_client = igb_get_i2c_client(adapter, dev_addr); + s32 status; + u16 swfw_mask = 0; + + if (!this_client) + return E1000_ERR_I2C; + + swfw_mask = E1000_SWFW_PHY0_SM; + + if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) + != E1000_SUCCESS) + return E1000_ERR_SWFW_SYNC; + + status = i2c_smbus_read_byte_data(this_client, byte_offset); + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + + if (status < 0) + return E1000_ERR_I2C; + else { + *data = status; + return E1000_SUCCESS; + } +} + +/* igb_write_i2c_byte - Writes 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to write + * @dev_addr: device address + * @data: value to write + * + * Performs byte write operation over I2C interface at + * a specified device address. + */ +s32 igb_write_i2c_byte(struct e1000_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data) +{ + struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw); + struct i2c_client *this_client = igb_get_i2c_client(adapter, dev_addr); + s32 status; + u16 swfw_mask = E1000_SWFW_PHY0_SM; + + if (!this_client) + return E1000_ERR_I2C; + + if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != E1000_SUCCESS) + return E1000_ERR_SWFW_SYNC; + status = i2c_smbus_write_byte_data(this_client, byte_offset, data); + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + + if (status) + return E1000_ERR_I2C; + else + return E1000_SUCCESS; + +} /* igb_main.c */ diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c index ab3429729bd..0987822359f 100644 --- a/drivers/net/ethernet/intel/igb/igb_ptp.c +++ b/drivers/net/ethernet/intel/igb/igb_ptp.c @@ -20,6 +20,7 @@ #include <linux/module.h> #include <linux/device.h> #include <linux/pci.h> +#include <linux/ptp_classify.h> #include "igb.h" @@ -70,6 +71,7 @@ */ #define IGB_SYSTIM_OVERFLOW_PERIOD (HZ * 60 * 9) +#define IGB_PTP_TX_TIMEOUT (HZ * 15) #define INCPERIOD_82576 (1 << E1000_TIMINCA_16NS_SHIFT) #define INCVALUE_82576_MASK ((1 << E1000_TIMINCA_16NS_SHIFT) - 1) #define INCVALUE_82576 (16 << IGB_82576_TSYNC_SHIFT) @@ -396,6 +398,15 @@ void igb_ptp_tx_work(struct work_struct *work) if (!adapter->ptp_tx_skb) return; + if (time_is_before_jiffies(adapter->ptp_tx_start + + IGB_PTP_TX_TIMEOUT)) { + dev_kfree_skb_any(adapter->ptp_tx_skb); + adapter->ptp_tx_skb = NULL; + adapter->tx_hwtstamp_timeouts++; + dev_warn(&adapter->pdev->dev, "clearing Tx timestamp hang"); + return; + } + tsynctxctl = rd32(E1000_TSYNCTXCTL); if (tsynctxctl & E1000_TSYNCTXCTL_VALID) igb_ptp_tx_hwtstamp(adapter); @@ -419,6 +430,51 @@ static void igb_ptp_overflow_check(struct work_struct *work) } /** + * igb_ptp_rx_hang - detect error case when Rx timestamp registers latched + * @adapter: private network adapter structure + * + * This watchdog task is scheduled to detect error case where hardware has + * dropped an Rx packet that was timestamped when the ring is full. The + * particular error is rare but leaves the device in a state unable to timestamp + * any future packets. + */ +void igb_ptp_rx_hang(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct igb_ring *rx_ring; + u32 tsyncrxctl = rd32(E1000_TSYNCRXCTL); + unsigned long rx_event; + int n; + + if (hw->mac.type != e1000_82576) + return; + + /* If we don't have a valid timestamp in the registers, just update the + * timeout counter and exit + */ + if (!(tsyncrxctl & E1000_TSYNCRXCTL_VALID)) { + adapter->last_rx_ptp_check = jiffies; + return; + } + + /* Determine the most recent watchdog or rx_timestamp event */ + rx_event = adapter->last_rx_ptp_check; + for (n = 0; n < adapter->num_rx_queues; n++) { + rx_ring = adapter->rx_ring[n]; + if (time_after(rx_ring->last_rx_timestamp, rx_event)) + rx_event = rx_ring->last_rx_timestamp; + } + + /* Only need to read the high RXSTMP register to clear the lock */ + if (time_is_before_jiffies(rx_event + 5 * HZ)) { + rd32(E1000_RXSTMPH); + adapter->last_rx_ptp_check = jiffies; + adapter->rx_hwtstamp_cleared++; + dev_warn(&adapter->pdev->dev, "clearing Rx timestamp hang"); + } +} + +/** * igb_ptp_tx_hwtstamp - utility function which checks for TX time stamp * @adapter: Board private structure. * @@ -643,7 +699,6 @@ int igb_ptp_hwtstamp_ioctl(struct net_device *netdev, else wr32(E1000_ETQF(3), 0); -#define PTP_PORT 319 /* L4 Queue Filter[3]: filter by destination port and protocol */ if (is_l4) { u32 ftqf = (IPPROTO_UDP /* UDP */ @@ -652,12 +707,12 @@ int igb_ptp_hwtstamp_ioctl(struct net_device *netdev, | E1000_FTQF_MASK); /* mask all inputs */ ftqf &= ~E1000_FTQF_MASK_PROTO_BP; /* enable protocol check */ - wr32(E1000_IMIR(3), htons(PTP_PORT)); + wr32(E1000_IMIR(3), htons(PTP_EV_PORT)); wr32(E1000_IMIREXT(3), (E1000_IMIREXT_SIZE_BP | E1000_IMIREXT_CTRL_BP)); if (hw->mac.type == e1000_82576) { /* enable source port check */ - wr32(E1000_SPQF(3), htons(PTP_PORT)); + wr32(E1000_SPQF(3), htons(PTP_EV_PORT)); ftqf &= ~E1000_FTQF_MASK_SOURCE_PORT_BP; } wr32(E1000_FTQF(3), ftqf); @@ -801,6 +856,10 @@ void igb_ptp_stop(struct igb_adapter *adapter) } cancel_work_sync(&adapter->ptp_tx_work); + if (adapter->ptp_tx_skb) { + dev_kfree_skb_any(adapter->ptp_tx_skb); + adapter->ptp_tx_skb = NULL; + } if (adapter->ptp_clock) { ptp_clock_unregister(adapter->ptp_clock); diff --git a/drivers/net/ethernet/intel/igbvf/igbvf.h b/drivers/net/ethernet/intel/igbvf/igbvf.h index fdca7b67277..a1463e3d14c 100644 --- a/drivers/net/ethernet/intel/igbvf/igbvf.h +++ b/drivers/net/ethernet/intel/igbvf/igbvf.h @@ -127,8 +127,8 @@ struct igbvf_buffer { /* Tx */ struct { unsigned long time_stamp; + union e1000_adv_tx_desc *next_to_watch; u16 length; - u16 next_to_watch; u16 mapped_as_page; }; /* Rx */ diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c index 277f5dfe3d9..d60cd439341 100644 --- a/drivers/net/ethernet/intel/igbvf/netdev.c +++ b/drivers/net/ethernet/intel/igbvf/netdev.c @@ -797,20 +797,31 @@ static bool igbvf_clean_tx_irq(struct igbvf_ring *tx_ring) struct sk_buff *skb; union e1000_adv_tx_desc *tx_desc, *eop_desc; unsigned int total_bytes = 0, total_packets = 0; - unsigned int i, eop, count = 0; + unsigned int i, count = 0; bool cleaned = false; i = tx_ring->next_to_clean; - eop = tx_ring->buffer_info[i].next_to_watch; - eop_desc = IGBVF_TX_DESC_ADV(*tx_ring, eop); + buffer_info = &tx_ring->buffer_info[i]; + eop_desc = buffer_info->next_to_watch; + + do { + /* if next_to_watch is not set then there is no work pending */ + if (!eop_desc) + break; + + /* prevent any other reads prior to eop_desc */ + read_barrier_depends(); + + /* if DD is not set pending work has not been completed */ + if (!(eop_desc->wb.status & cpu_to_le32(E1000_TXD_STAT_DD))) + break; + + /* clear next_to_watch to prevent false hangs */ + buffer_info->next_to_watch = NULL; - while ((eop_desc->wb.status & cpu_to_le32(E1000_TXD_STAT_DD)) && - (count < tx_ring->count)) { - rmb(); /* read buffer_info after eop_desc status */ for (cleaned = false; !cleaned; count++) { tx_desc = IGBVF_TX_DESC_ADV(*tx_ring, i); - buffer_info = &tx_ring->buffer_info[i]; - cleaned = (i == eop); + cleaned = (tx_desc == eop_desc); skb = buffer_info->skb; if (skb) { @@ -831,10 +842,12 @@ static bool igbvf_clean_tx_irq(struct igbvf_ring *tx_ring) i++; if (i == tx_ring->count) i = 0; + + buffer_info = &tx_ring->buffer_info[i]; } - eop = tx_ring->buffer_info[i].next_to_watch; - eop_desc = IGBVF_TX_DESC_ADV(*tx_ring, eop); - } + + eop_desc = buffer_info->next_to_watch; + } while (count < tx_ring->count); tx_ring->next_to_clean = i; @@ -1399,12 +1412,10 @@ static void igbvf_set_multi(struct net_device *netdev) int i; if (!netdev_mc_empty(netdev)) { - mta_list = kmalloc(netdev_mc_count(netdev) * 6, GFP_ATOMIC); - if (!mta_list) { - dev_err(&adapter->pdev->dev, - "failed to allocate multicast filter list\n"); + mta_list = kmalloc_array(netdev_mc_count(netdev), ETH_ALEN, + GFP_ATOMIC); + if (!mta_list) return; - } } /* prepare a packed array of only addresses. */ @@ -1738,7 +1749,6 @@ static int igbvf_set_mac(struct net_device *netdev, void *p) return -EADDRNOTAVAIL; memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); - netdev->addr_assign_type &= ~NET_ADDR_RANDOM; return 0; } @@ -1964,7 +1974,6 @@ static int igbvf_tso(struct igbvf_adapter *adapter, context_desc->seqnum_seed = 0; buffer_info->time_stamp = jiffies; - buffer_info->next_to_watch = i; buffer_info->dma = 0; i++; if (i == tx_ring->count) @@ -2024,7 +2033,6 @@ static inline bool igbvf_tx_csum(struct igbvf_adapter *adapter, context_desc->mss_l4len_idx = 0; buffer_info->time_stamp = jiffies; - buffer_info->next_to_watch = i; buffer_info->dma = 0; i++; if (i == tx_ring->count) @@ -2064,8 +2072,7 @@ static int igbvf_maybe_stop_tx(struct net_device *netdev, int size) static inline int igbvf_tx_map_adv(struct igbvf_adapter *adapter, struct igbvf_ring *tx_ring, - struct sk_buff *skb, - unsigned int first) + struct sk_buff *skb) { struct igbvf_buffer *buffer_info; struct pci_dev *pdev = adapter->pdev; @@ -2080,7 +2087,6 @@ static inline int igbvf_tx_map_adv(struct igbvf_adapter *adapter, buffer_info->length = len; /* set time_stamp *before* dma to help avoid a possible race */ buffer_info->time_stamp = jiffies; - buffer_info->next_to_watch = i; buffer_info->mapped_as_page = false; buffer_info->dma = dma_map_single(&pdev->dev, skb->data, len, DMA_TO_DEVICE); @@ -2103,7 +2109,6 @@ static inline int igbvf_tx_map_adv(struct igbvf_adapter *adapter, BUG_ON(len >= IGBVF_MAX_DATA_PER_TXD); buffer_info->length = len; buffer_info->time_stamp = jiffies; - buffer_info->next_to_watch = i; buffer_info->mapped_as_page = true; buffer_info->dma = skb_frag_dma_map(&pdev->dev, frag, 0, len, DMA_TO_DEVICE); @@ -2112,7 +2117,6 @@ static inline int igbvf_tx_map_adv(struct igbvf_adapter *adapter, } tx_ring->buffer_info[i].skb = skb; - tx_ring->buffer_info[first].next_to_watch = i; return ++count; @@ -2123,7 +2127,6 @@ dma_error: buffer_info->dma = 0; buffer_info->time_stamp = 0; buffer_info->length = 0; - buffer_info->next_to_watch = 0; buffer_info->mapped_as_page = false; if (count) count--; @@ -2142,7 +2145,8 @@ dma_error: static inline void igbvf_tx_queue_adv(struct igbvf_adapter *adapter, struct igbvf_ring *tx_ring, - int tx_flags, int count, u32 paylen, + int tx_flags, int count, + unsigned int first, u32 paylen, u8 hdr_len) { union e1000_adv_tx_desc *tx_desc = NULL; @@ -2192,6 +2196,7 @@ static inline void igbvf_tx_queue_adv(struct igbvf_adapter *adapter, * such as IA-64). */ wmb(); + tx_ring->buffer_info[first].next_to_watch = tx_desc; tx_ring->next_to_use = i; writel(i, adapter->hw.hw_addr + tx_ring->tail); /* we need this if more than one processor can write to our tail @@ -2258,11 +2263,11 @@ static netdev_tx_t igbvf_xmit_frame_ring_adv(struct sk_buff *skb, * count reflects descriptors mapped, if 0 then mapping error * has occurred and we need to rewind the descriptor queue */ - count = igbvf_tx_map_adv(adapter, tx_ring, skb, first); + count = igbvf_tx_map_adv(adapter, tx_ring, skb); if (count) { igbvf_tx_queue_adv(adapter, tx_ring, tx_flags, count, - skb->len, hdr_len); + first, skb->len, hdr_len); /* Make sure there is space in the ring for the next send. */ igbvf_maybe_stop_tx(netdev, MAX_SKB_FRAGS + 4); } else { @@ -2736,30 +2741,24 @@ static int igbvf_probe(struct pci_dev *pdev, const struct pci_device_id *ent) err = hw->mac.ops.reset_hw(hw); if (err) { dev_info(&pdev->dev, - "PF still in reset state, assigning new address." - " Is the PF interface up?\n"); - eth_hw_addr_random(netdev); - memcpy(adapter->hw.mac.addr, netdev->dev_addr, - netdev->addr_len); + "PF still in reset state. Is the PF interface up?\n"); } else { err = hw->mac.ops.read_mac_addr(hw); - if (err) { - dev_err(&pdev->dev, "Error reading MAC address\n"); - goto err_hw_init; - } + if (err) + dev_info(&pdev->dev, "Error reading MAC address.\n"); + else if (is_zero_ether_addr(adapter->hw.mac.addr)) + dev_info(&pdev->dev, "MAC address not assigned by administrator.\n"); memcpy(netdev->dev_addr, adapter->hw.mac.addr, - netdev->addr_len); + netdev->addr_len); } if (!is_valid_ether_addr(netdev->dev_addr)) { - dev_err(&pdev->dev, "Invalid MAC Address: %pM\n", - netdev->dev_addr); - err = -EIO; - goto err_hw_init; + dev_info(&pdev->dev, "Assigning random MAC address.\n"); + eth_hw_addr_random(netdev); + memcpy(adapter->hw.mac.addr, netdev->dev_addr, + netdev->addr_len); } - memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len); - setup_timer(&adapter->watchdog_timer, &igbvf_watchdog, (unsigned long) adapter); diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_main.c b/drivers/net/ethernet/intel/ixgb/ixgb_main.c index ae96c10251b..ea480837343 100644 --- a/drivers/net/ethernet/intel/ixgb/ixgb_main.c +++ b/drivers/net/ethernet/intel/ixgb/ixgb_main.c @@ -500,9 +500,8 @@ ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } ixgb_get_ee_mac_addr(&adapter->hw, netdev->dev_addr); - memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len); - if (!is_valid_ether_addr(netdev->perm_addr)) { + if (!is_valid_ether_addr(netdev->dev_addr)) { netif_err(adapter, probe, adapter->netdev, "Invalid MAC Address\n"); err = -EIO; goto err_eeprom; @@ -709,11 +708,8 @@ ixgb_setup_tx_resources(struct ixgb_adapter *adapter) size = sizeof(struct ixgb_buffer) * txdr->count; txdr->buffer_info = vzalloc(size); - if (!txdr->buffer_info) { - netif_err(adapter, probe, adapter->netdev, - "Unable to allocate transmit descriptor ring memory\n"); + if (!txdr->buffer_info) return -ENOMEM; - } /* round up to nearest 4K */ @@ -798,11 +794,8 @@ ixgb_setup_rx_resources(struct ixgb_adapter *adapter) size = sizeof(struct ixgb_buffer) * rxdr->count; rxdr->buffer_info = vzalloc(size); - if (!rxdr->buffer_info) { - netif_err(adapter, probe, adapter->netdev, - "Unable to allocate receive descriptor ring\n"); + if (!rxdr->buffer_info) return -ENOMEM; - } /* Round up to nearest 4K */ diff --git a/drivers/net/ethernet/intel/ixgbe/Makefile b/drivers/net/ethernet/intel/ixgbe/Makefile index f3a632bf8d9..be2989e6000 100644 --- a/drivers/net/ethernet/intel/ixgbe/Makefile +++ b/drivers/net/ethernet/intel/ixgbe/Makefile @@ -1,7 +1,7 @@ ################################################################################ # # Intel 10 Gigabit PCI Express Linux driver -# Copyright(c) 1999 - 2012 Intel Corporation. +# Copyright(c) 1999 - 2013 Intel Corporation. # # This program is free software; you can redistribute it and/or modify it # under the terms and conditions of the GNU General Public License, @@ -32,7 +32,7 @@ obj-$(CONFIG_IXGBE) += ixgbe.o -ixgbe-objs := ixgbe_main.o ixgbe_common.o ixgbe_ethtool.o ixgbe_debugfs.o\ +ixgbe-objs := ixgbe_main.o ixgbe_common.o ixgbe_ethtool.o \ ixgbe_82599.o ixgbe_82598.o ixgbe_phy.o ixgbe_sriov.o \ ixgbe_mbx.o ixgbe_x540.o ixgbe_lib.o ixgbe_ptp.o @@ -40,4 +40,5 @@ ixgbe-$(CONFIG_IXGBE_DCB) += ixgbe_dcb.o ixgbe_dcb_82598.o \ ixgbe_dcb_82599.o ixgbe_dcb_nl.o ixgbe-$(CONFIG_IXGBE_HWMON) += ixgbe_sysfs.o +ixgbe-$(CONFIG_DEBUG_FS) += ixgbe_debugfs.o ixgbe-$(CONFIG_FCOE:m=y) += ixgbe_fcoe.o diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h index 8e786764c60..a8e10cff7a8 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -35,6 +35,7 @@ #include <linux/cpumask.h> #include <linux/aer.h> #include <linux/if_vlan.h> +#include <linux/jiffies.h> #include <linux/clocksource.h> #include <linux/net_tstamp.h> @@ -91,21 +92,26 @@ */ #define IXGBE_RX_HDR_SIZE IXGBE_RXBUFFER_256 -#define MAXIMUM_ETHERNET_VLAN_SIZE (ETH_FRAME_LEN + ETH_FCS_LEN + VLAN_HLEN) - /* How many Rx Buffers do we bundle into one write to the hardware ? */ #define IXGBE_RX_BUFFER_WRITE 16 /* Must be power of 2 */ -#define IXGBE_TX_FLAGS_CSUM (u32)(1) -#define IXGBE_TX_FLAGS_HW_VLAN (u32)(1 << 1) -#define IXGBE_TX_FLAGS_SW_VLAN (u32)(1 << 2) -#define IXGBE_TX_FLAGS_TSO (u32)(1 << 3) -#define IXGBE_TX_FLAGS_IPV4 (u32)(1 << 4) -#define IXGBE_TX_FLAGS_FCOE (u32)(1 << 5) -#define IXGBE_TX_FLAGS_FSO (u32)(1 << 6) -#define IXGBE_TX_FLAGS_TXSW (u32)(1 << 7) -#define IXGBE_TX_FLAGS_TSTAMP (u32)(1 << 8) -#define IXGBE_TX_FLAGS_NO_IFCS (u32)(1 << 9) +enum ixgbe_tx_flags { + /* cmd_type flags */ + IXGBE_TX_FLAGS_HW_VLAN = 0x01, + IXGBE_TX_FLAGS_TSO = 0x02, + IXGBE_TX_FLAGS_TSTAMP = 0x04, + + /* olinfo flags */ + IXGBE_TX_FLAGS_CC = 0x08, + IXGBE_TX_FLAGS_IPV4 = 0x10, + IXGBE_TX_FLAGS_CSUM = 0x20, + + /* software defined flags */ + IXGBE_TX_FLAGS_SW_VLAN = 0x40, + IXGBE_TX_FLAGS_FCOE = 0x80, +}; + +/* VLAN info */ #define IXGBE_TX_FLAGS_VLAN_MASK 0xffff0000 #define IXGBE_TX_FLAGS_VLAN_PRIO_MASK 0xe0000000 #define IXGBE_TX_FLAGS_VLAN_PRIO_SHIFT 29 @@ -150,7 +156,7 @@ struct vf_macvlans { /* Tx Descriptors needed, worst case */ #define TXD_USE_COUNT(S) DIV_ROUND_UP((S), IXGBE_MAX_DATA_PER_TXD) -#define DESC_NEEDED ((MAX_SKB_FRAGS * TXD_USE_COUNT(PAGE_SIZE)) + 4) +#define DESC_NEEDED (MAX_SKB_FRAGS + 4) /* wrapper around a pointer to a socket buffer, * so a DMA handle can be stored along with the buffer */ @@ -195,6 +201,7 @@ struct ixgbe_rx_queue_stats { enum ixgbe_ring_state_t { __IXGBE_TX_FDIR_INIT_DONE, + __IXGBE_TX_XPS_INIT_DONE, __IXGBE_TX_DETECT_HANG, __IXGBE_HANG_CHECK_ARMED, __IXGBE_RX_RSC_ENABLED, @@ -224,6 +231,7 @@ struct ixgbe_ring { struct ixgbe_tx_buffer *tx_buffer_info; struct ixgbe_rx_buffer *rx_buffer_info; }; + unsigned long last_rx_timestamp; unsigned long state; u8 __iomem *tail; dma_addr_t dma; /* phys. address of descriptor ring */ @@ -271,15 +279,10 @@ enum ixgbe_ring_f_enum { #define IXGBE_MAX_RSS_INDICES 16 #define IXGBE_MAX_VMDQ_INDICES 64 -#define IXGBE_MAX_FDIR_INDICES 64 -#ifdef IXGBE_FCOE +#define IXGBE_MAX_FDIR_INDICES 63 /* based on q_vector limit */ #define IXGBE_MAX_FCOE_INDICES 8 -#define MAX_RX_QUEUES (IXGBE_MAX_FDIR_INDICES + IXGBE_MAX_FCOE_INDICES) -#define MAX_TX_QUEUES (IXGBE_MAX_FDIR_INDICES + IXGBE_MAX_FCOE_INDICES) -#else -#define MAX_RX_QUEUES IXGBE_MAX_FDIR_INDICES -#define MAX_TX_QUEUES IXGBE_MAX_FDIR_INDICES -#endif /* IXGBE_FCOE */ +#define MAX_RX_QUEUES (IXGBE_MAX_FDIR_INDICES + 1) +#define MAX_TX_QUEUES (IXGBE_MAX_FDIR_INDICES + 1) struct ixgbe_ring_feature { u16 limit; /* upper limit on feature indices */ u16 indices; /* current value of indices */ @@ -573,11 +576,14 @@ struct ixgbe_adapter { struct ptp_clock *ptp_clock; struct ptp_clock_info ptp_caps; + struct work_struct ptp_tx_work; + struct sk_buff *ptp_tx_skb; + unsigned long ptp_tx_start; unsigned long last_overflow_check; + unsigned long last_rx_ptp_check; spinlock_t tmreg_lock; struct cyclecounter cc; struct timecounter tc; - int rx_hwtstamp_filter; u32 base_incval; /* SR-IOV */ @@ -614,6 +620,7 @@ enum ixgbe_state_t { __IXGBE_DOWN, __IXGBE_SERVICE_SCHED, __IXGBE_IN_SFP_INIT, + __IXGBE_READ_I2C, }; struct ixgbe_cb { @@ -694,8 +701,8 @@ extern bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw); extern void ixgbe_set_rx_mode(struct net_device *netdev); #ifdef CONFIG_IXGBE_DCB extern void ixgbe_set_rx_drop_en(struct ixgbe_adapter *adapter); -extern int ixgbe_setup_tc(struct net_device *dev, u8 tc); #endif +extern int ixgbe_setup_tc(struct net_device *dev, u8 tc); extern void ixgbe_tx_ctxtdesc(struct ixgbe_ring *, u32, u32, u32, u32); extern void ixgbe_do_reset(struct net_device *netdev); #ifdef CONFIG_IXGBE_HWMON @@ -742,15 +749,32 @@ static inline struct netdev_queue *txring_txq(const struct ixgbe_ring *ring) extern void ixgbe_ptp_init(struct ixgbe_adapter *adapter); extern void ixgbe_ptp_stop(struct ixgbe_adapter *adapter); extern void ixgbe_ptp_overflow_check(struct ixgbe_adapter *adapter); -extern void ixgbe_ptp_tx_hwtstamp(struct ixgbe_q_vector *q_vector, - struct sk_buff *skb); -extern void ixgbe_ptp_rx_hwtstamp(struct ixgbe_q_vector *q_vector, - union ixgbe_adv_rx_desc *rx_desc, - struct sk_buff *skb); +extern void ixgbe_ptp_rx_hang(struct ixgbe_adapter *adapter); +extern void __ixgbe_ptp_rx_hwtstamp(struct ixgbe_q_vector *q_vector, + struct sk_buff *skb); +static inline void ixgbe_ptp_rx_hwtstamp(struct ixgbe_ring *rx_ring, + union ixgbe_adv_rx_desc *rx_desc, + struct sk_buff *skb) +{ + if (unlikely(!ixgbe_test_staterr(rx_desc, IXGBE_RXDADV_STAT_TS))) + return; + + __ixgbe_ptp_rx_hwtstamp(rx_ring->q_vector, skb); + + /* + * Update the last_rx_timestamp timer in order to enable watchdog check + * for error case of latched timestamp on a dropped packet. + */ + rx_ring->last_rx_timestamp = jiffies; +} + extern int ixgbe_ptp_hwtstamp_ioctl(struct ixgbe_adapter *adapter, struct ifreq *ifr, int cmd); extern void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter); extern void ixgbe_ptp_reset(struct ixgbe_adapter *adapter); extern void ixgbe_ptp_check_pps_event(struct ixgbe_adapter *adapter, u32 eicr); +#ifdef CONFIG_PCI_IOV +void ixgbe_sriov_reinit(struct ixgbe_adapter *adapter); +#endif #endif /* _IXGBE_H_ */ diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c index 42537336110..d0113fc97b6 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -41,7 +41,6 @@ static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw, ixgbe_link_speed speed, - bool autoneg, bool autoneg_wait_to_complete); static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, u8 *eeprom_data); @@ -633,15 +632,15 @@ out: * ixgbe_setup_mac_link_82598 - Set MAC link speed * @hw: pointer to hardware structure * @speed: new link speed - * @autoneg: true if auto-negotiation enabled * @autoneg_wait_to_complete: true when waiting for completion is needed * * Set the link speed in the AUTOC register and restarts link. **/ static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw, - ixgbe_link_speed speed, bool autoneg, - bool autoneg_wait_to_complete) + ixgbe_link_speed speed, + bool autoneg_wait_to_complete) { + bool autoneg = false; s32 status = 0; ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN; u32 curr_autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); @@ -685,20 +684,18 @@ static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw, * ixgbe_setup_copper_link_82598 - Set the PHY autoneg advertised field * @hw: pointer to hardware structure * @speed: new link speed - * @autoneg: true if autonegotiation enabled * @autoneg_wait_to_complete: true if waiting is needed to complete * * Sets the link speed in the AUTOC register in the MAC and restarts link. **/ static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw, ixgbe_link_speed speed, - bool autoneg, bool autoneg_wait_to_complete) { s32 status; /* Setup the PHY according to input speed */ - status = hw->phy.ops.setup_link_speed(hw, speed, autoneg, + status = hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait_to_complete); /* Set up MAC */ ixgbe_start_mac_link_82598(hw, autoneg_wait_to_complete); @@ -1006,15 +1003,16 @@ static s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val) } /** - * ixgbe_read_i2c_eeprom_82598 - Reads 8 bit word over I2C interface. + * ixgbe_read_i2c_phy_82598 - Reads 8 bit word over I2C interface. * @hw: pointer to hardware structure - * @byte_offset: EEPROM byte offset to read + * @dev_addr: address to read from + * @byte_offset: byte offset to read from dev_addr * @eeprom_data: value read * - * Performs 8 byte read operation to SFP module's EEPROM over I2C interface. + * Performs 8 byte read operation to SFP module's data over I2C interface. **/ -static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, - u8 *eeprom_data) +static s32 ixgbe_read_i2c_phy_82598(struct ixgbe_hw *hw, u8 dev_addr, + u8 byte_offset, u8 *eeprom_data) { s32 status = 0; u16 sfp_addr = 0; @@ -1028,7 +1026,7 @@ static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, * 0xC30D. These registers are used to talk to the SFP+ * module's EEPROM through the SDA/SCL (I2C) interface. */ - sfp_addr = (IXGBE_I2C_EEPROM_DEV_ADDR << 8) + byte_offset; + sfp_addr = (dev_addr << 8) + byte_offset; sfp_addr = (sfp_addr | IXGBE_I2C_EEPROM_READ_MASK); hw->phy.ops.write_reg(hw, IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR, @@ -1060,7 +1058,6 @@ static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, *eeprom_data = (u8)(sfp_data >> 8); } else { status = IXGBE_ERR_PHY; - goto out; } out: @@ -1068,6 +1065,36 @@ out: } /** + * ixgbe_read_i2c_eeprom_82598 - Reads 8 bit word over I2C interface. + * @hw: pointer to hardware structure + * @byte_offset: EEPROM byte offset to read + * @eeprom_data: value read + * + * Performs 8 byte read operation to SFP module's EEPROM over I2C interface. + **/ +static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, + u8 *eeprom_data) +{ + return ixgbe_read_i2c_phy_82598(hw, IXGBE_I2C_EEPROM_DEV_ADDR, + byte_offset, eeprom_data); +} + +/** + * ixgbe_read_i2c_sff8472_82598 - Reads 8 bit word over I2C interface. + * @hw: pointer to hardware structure + * @byte_offset: byte offset at address 0xA2 + * @eeprom_data: value read + * + * Performs 8 byte read operation to SFP module's SFF-8472 data over I2C + **/ +static s32 ixgbe_read_i2c_sff8472_82598(struct ixgbe_hw *hw, u8 byte_offset, + u8 *sff8472_data) +{ + return ixgbe_read_i2c_phy_82598(hw, IXGBE_I2C_EEPROM_DEV_ADDR2, + byte_offset, sff8472_data); +} + +/** * ixgbe_get_supported_physical_layer_82598 - Returns physical layer type * @hw: pointer to hardware structure * @@ -1300,6 +1327,7 @@ static struct ixgbe_phy_operations phy_ops_82598 = { .write_reg = &ixgbe_write_phy_reg_generic, .setup_link = &ixgbe_setup_phy_link_generic, .setup_link_speed = &ixgbe_setup_phy_link_speed_generic, + .read_i2c_sff8472 = &ixgbe_read_i2c_sff8472_82598, .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_82598, .check_overtemp = &ixgbe_tn_check_overtemp, }; @@ -1311,4 +1339,3 @@ struct ixgbe_info ixgbe_82598_info = { .eeprom_ops = &eeprom_ops_82598, .phy_ops = &phy_ops_82598, }; - diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c index 1073aea5da4..203a00c2433 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -45,21 +45,17 @@ static void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw); static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw); static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, ixgbe_link_speed speed, - bool autoneg, bool autoneg_wait_to_complete); static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, ixgbe_link_speed speed, - bool autoneg, bool autoneg_wait_to_complete); static s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw, bool autoneg_wait_to_complete); static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, ixgbe_link_speed speed, - bool autoneg, bool autoneg_wait_to_complete); static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, ixgbe_link_speed speed, - bool autoneg, bool autoneg_wait_to_complete); static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw); @@ -234,13 +230,13 @@ static s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw) * ixgbe_get_link_capabilities_82599 - Determines link capabilities * @hw: pointer to hardware structure * @speed: pointer to link speed - * @negotiation: true when autoneg or autotry is enabled + * @autoneg: true when autoneg or autotry is enabled * * Determines the link capabilities by reading the AUTOC register. **/ static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, ixgbe_link_speed *speed, - bool *negotiation) + bool *autoneg) { s32 status = 0; u32 autoc = 0; @@ -251,7 +247,7 @@ static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 || hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1) { *speed = IXGBE_LINK_SPEED_1GB_FULL; - *negotiation = true; + *autoneg = true; goto out; } @@ -268,22 +264,22 @@ static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, switch (autoc & IXGBE_AUTOC_LMS_MASK) { case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: *speed = IXGBE_LINK_SPEED_1GB_FULL; - *negotiation = false; + *autoneg = false; break; case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: *speed = IXGBE_LINK_SPEED_10GB_FULL; - *negotiation = false; + *autoneg = false; break; case IXGBE_AUTOC_LMS_1G_AN: *speed = IXGBE_LINK_SPEED_1GB_FULL; - *negotiation = true; + *autoneg = true; break; case IXGBE_AUTOC_LMS_10G_SERIAL: *speed = IXGBE_LINK_SPEED_10GB_FULL; - *negotiation = false; + *autoneg = false; break; case IXGBE_AUTOC_LMS_KX4_KX_KR: @@ -295,7 +291,7 @@ static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, *speed |= IXGBE_LINK_SPEED_10GB_FULL; if (autoc & IXGBE_AUTOC_KX_SUPP) *speed |= IXGBE_LINK_SPEED_1GB_FULL; - *negotiation = true; + *autoneg = true; break; case IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII: @@ -306,12 +302,12 @@ static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, *speed |= IXGBE_LINK_SPEED_10GB_FULL; if (autoc & IXGBE_AUTOC_KX_SUPP) *speed |= IXGBE_LINK_SPEED_1GB_FULL; - *negotiation = true; + *autoneg = true; break; case IXGBE_AUTOC_LMS_SGMII_1G_100M: *speed = IXGBE_LINK_SPEED_1GB_FULL | IXGBE_LINK_SPEED_100_FULL; - *negotiation = false; + *autoneg = false; break; default: @@ -323,7 +319,7 @@ static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, if (hw->phy.multispeed_fiber) { *speed |= IXGBE_LINK_SPEED_10GB_FULL | IXGBE_LINK_SPEED_1GB_FULL; - *negotiation = true; + *autoneg = true; } out: @@ -510,14 +506,12 @@ static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) * ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed * @hw: pointer to hardware structure * @speed: new link speed - * @autoneg: true if autonegotiation enabled * @autoneg_wait_to_complete: true when waiting for completion is needed * * Set the link speed in the AUTOC register and restarts link. **/ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, ixgbe_link_speed speed, - bool autoneg, bool autoneg_wait_to_complete) { s32 status = 0; @@ -527,11 +521,11 @@ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); u32 i = 0; bool link_up = false; - bool negotiation; + bool autoneg = false; /* Mask off requested but non-supported speeds */ status = hw->mac.ops.get_link_capabilities(hw, &link_speed, - &negotiation); + &autoneg); if (status != 0) return status; @@ -564,7 +558,6 @@ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, status = ixgbe_setup_mac_link_82599(hw, IXGBE_LINK_SPEED_10GB_FULL, - autoneg, autoneg_wait_to_complete); if (status != 0) return status; @@ -617,7 +610,6 @@ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, status = ixgbe_setup_mac_link_82599(hw, IXGBE_LINK_SPEED_1GB_FULL, - autoneg, autoneg_wait_to_complete); if (status != 0) return status; @@ -646,7 +638,6 @@ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, if (speedcnt > 1) status = ixgbe_setup_mac_link_multispeed_fiber(hw, highest_link_speed, - autoneg, autoneg_wait_to_complete); out: @@ -666,13 +657,12 @@ out: * ixgbe_setup_mac_link_smartspeed - Set MAC link speed using SmartSpeed * @hw: pointer to hardware structure * @speed: new link speed - * @autoneg: true if autonegotiation enabled * @autoneg_wait_to_complete: true when waiting for completion is needed * * Implements the Intel SmartSpeed algorithm. **/ static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, - ixgbe_link_speed speed, bool autoneg, + ixgbe_link_speed speed, bool autoneg_wait_to_complete) { s32 status = 0; @@ -703,7 +693,7 @@ static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, /* First, try to get link with full advertisement */ hw->phy.smart_speed_active = false; for (j = 0; j < IXGBE_SMARTSPEED_MAX_RETRIES; j++) { - status = ixgbe_setup_mac_link_82599(hw, speed, autoneg, + status = ixgbe_setup_mac_link_82599(hw, speed, autoneg_wait_to_complete); if (status != 0) goto out; @@ -738,7 +728,7 @@ static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, /* Turn SmartSpeed on to disable KR support */ hw->phy.smart_speed_active = true; - status = ixgbe_setup_mac_link_82599(hw, speed, autoneg, + status = ixgbe_setup_mac_link_82599(hw, speed, autoneg_wait_to_complete); if (status != 0) goto out; @@ -764,7 +754,7 @@ static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, /* We didn't get link. Turn SmartSpeed back off. */ hw->phy.smart_speed_active = false; - status = ixgbe_setup_mac_link_82599(hw, speed, autoneg, + status = ixgbe_setup_mac_link_82599(hw, speed, autoneg_wait_to_complete); out: @@ -778,14 +768,13 @@ out: * ixgbe_setup_mac_link_82599 - Set MAC link speed * @hw: pointer to hardware structure * @speed: new link speed - * @autoneg: true if autonegotiation enabled * @autoneg_wait_to_complete: true when waiting for completion is needed * * Set the link speed in the AUTOC register and restarts link. **/ static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, - ixgbe_link_speed speed, bool autoneg, - bool autoneg_wait_to_complete) + ixgbe_link_speed speed, + bool autoneg_wait_to_complete) { s32 status = 0; u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); @@ -799,6 +788,7 @@ static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, u32 i; ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN; bool got_lock = false; + bool autoneg = false; /* Check to see if speed passed in is supported. */ status = hw->mac.ops.get_link_capabilities(hw, &link_capabilities, @@ -911,20 +901,18 @@ out: * ixgbe_setup_copper_link_82599 - Set the PHY autoneg advertised field * @hw: pointer to hardware structure * @speed: new link speed - * @autoneg: true if autonegotiation enabled * @autoneg_wait_to_complete: true if waiting is needed to complete * * Restarts link on PHY and MAC based on settings passed in. **/ static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, ixgbe_link_speed speed, - bool autoneg, bool autoneg_wait_to_complete) { s32 status; /* Setup the PHY according to input speed */ - status = hw->phy.ops.setup_link_speed(hw, speed, autoneg, + status = hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait_to_complete); /* Set up MAC */ ixgbe_start_mac_link_82599(hw, autoneg_wait_to_complete); @@ -2253,6 +2241,7 @@ static struct ixgbe_phy_operations phy_ops_82599 = { .setup_link_speed = &ixgbe_setup_phy_link_speed_generic, .read_i2c_byte = &ixgbe_read_i2c_byte_generic, .write_i2c_byte = &ixgbe_write_i2c_byte_generic, + .read_i2c_sff8472 = &ixgbe_read_i2c_sff8472_generic, .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_generic, .write_i2c_eeprom = &ixgbe_write_i2c_eeprom_generic, .check_overtemp = &ixgbe_tn_check_overtemp, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c index 5e68afdd502..99e472ebaa7 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h index f7a0970a251..bc3948ead6e 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.c index 9bc17c0cb97..1f2c805684d 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.h index 1f4108ee154..1634de8b627 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.c index 87592b458c9..ac780770863 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.h index ba835708fca..3164f5453b8 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c index 4eac80d0185..05e23b80b5e 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.h index 4dec47faeb0..a4ef07631d1 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c index f1e002d5fa8..f3d68f9696b 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -30,6 +30,7 @@ #include <linux/dcbnl.h> #include "ixgbe_dcb_82598.h" #include "ixgbe_dcb_82599.h" +#include "ixgbe_sriov.h" /* Callbacks for DCB netlink in the kernel */ #define BIT_DCB_MODE 0x01 @@ -301,7 +302,6 @@ static void ixgbe_dcbnl_get_pfc_cfg(struct net_device *netdev, int priority, *setting = adapter->dcb_cfg.tc_config[priority].dcb_pfc; } -#ifdef IXGBE_FCOE static void ixgbe_dcbnl_devreset(struct net_device *dev) { struct ixgbe_adapter *adapter = netdev_priv(dev); @@ -320,7 +320,6 @@ static void ixgbe_dcbnl_devreset(struct net_device *dev) clear_bit(__IXGBE_RESETTING, &adapter->state); } -#endif static u8 ixgbe_dcbnl_set_all(struct net_device *netdev) { @@ -450,7 +449,6 @@ static u8 ixgbe_dcbnl_getcap(struct net_device *netdev, int capid, u8 *cap) static int ixgbe_dcbnl_getnumtcs(struct net_device *netdev, int tcid, u8 *num) { struct ixgbe_adapter *adapter = netdev_priv(netdev); - u8 rval = 0; if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) { switch (tcid) { @@ -461,14 +459,14 @@ static int ixgbe_dcbnl_getnumtcs(struct net_device *netdev, int tcid, u8 *num) *num = adapter->dcb_cfg.num_tcs.pfc_tcs; break; default: - rval = -EINVAL; + return -EINVAL; break; } } else { - rval = -EINVAL; + return -EINVAL; } - return rval; + return 0; } static int ixgbe_dcbnl_setnumtcs(struct net_device *netdev, int tcid, u8 num) @@ -541,6 +539,7 @@ static int ixgbe_dcbnl_ieee_setets(struct net_device *dev, int max_frame = dev->mtu + ETH_HLEN + ETH_FCS_LEN; int i, err = 0; __u8 max_tc = 0; + __u8 map_chg = 0; if (!(adapter->dcbx_cap & DCB_CAP_DCBX_VER_IEEE)) return -EINVAL; @@ -550,15 +549,22 @@ static int ixgbe_dcbnl_ieee_setets(struct net_device *dev, GFP_KERNEL); if (!adapter->ixgbe_ieee_ets) return -ENOMEM; - } - memcpy(adapter->ixgbe_ieee_ets, ets, sizeof(*adapter->ixgbe_ieee_ets)); + /* initialize UP2TC mappings to invalid value */ + for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) + adapter->ixgbe_ieee_ets->prio_tc[i] = + IEEE_8021QAZ_MAX_TCS; + } for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) { if (ets->prio_tc[i] > max_tc) max_tc = ets->prio_tc[i]; + if (ets->prio_tc[i] != adapter->ixgbe_ieee_ets->prio_tc[i]) + map_chg = 1; } + memcpy(adapter->ixgbe_ieee_ets, ets, sizeof(*adapter->ixgbe_ieee_ets)); + if (max_tc) max_tc++; @@ -567,6 +573,8 @@ static int ixgbe_dcbnl_ieee_setets(struct net_device *dev, if (max_tc != netdev_get_num_tc(dev)) err = ixgbe_setup_tc(dev, max_tc); + else if (map_chg) + ixgbe_dcbnl_devreset(dev); if (err) goto err_out; @@ -643,9 +651,11 @@ static int ixgbe_dcbnl_ieee_setapp(struct net_device *dev, return err; err = dcb_ieee_setapp(dev, app); + if (err) + return err; #ifdef IXGBE_FCOE - if (!err && app->selector == IEEE_8021QAZ_APP_SEL_ETHERTYPE && + if (app->selector == IEEE_8021QAZ_APP_SEL_ETHERTYPE && app->protocol == ETH_P_FCOE) { u8 app_mask = dcb_ieee_getapp_mask(dev, app); @@ -656,6 +666,23 @@ static int ixgbe_dcbnl_ieee_setapp(struct net_device *dev, ixgbe_dcbnl_devreset(dev); } #endif + + /* VF devices should use default UP when available */ + if (app->selector == IEEE_8021QAZ_APP_SEL_ETHERTYPE && + app->protocol == 0) { + int vf; + + adapter->default_up = app->priority; + + for (vf = 0; vf < adapter->num_vfs; vf++) { + struct vf_data_storage *vfinfo = &adapter->vfinfo[vf]; + + if (!vfinfo->pf_qos) + ixgbe_set_vmvir(adapter, vfinfo->pf_vlan, + app->priority, vf); + } + } + return 0; } @@ -683,6 +710,24 @@ static int ixgbe_dcbnl_ieee_delapp(struct net_device *dev, ixgbe_dcbnl_devreset(dev); } #endif + /* IF default priority is being removed clear VF default UP */ + if (app->selector == IEEE_8021QAZ_APP_SEL_ETHERTYPE && + app->protocol == 0 && adapter->default_up == app->priority) { + int vf; + long unsigned int app_mask = dcb_ieee_getapp_mask(dev, app); + int qos = app_mask ? find_first_bit(&app_mask, 8) : 0; + + adapter->default_up = qos; + + for (vf = 0; vf < adapter->num_vfs; vf++) { + struct vf_data_storage *vfinfo = &adapter->vfinfo[vf]; + + if (!vfinfo->pf_qos) + ixgbe_set_vmvir(adapter, vfinfo->pf_vlan, + qos, vf); + } + } + return err; } diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c index 50aa546b8c7..c5933f6dcee 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -24,9 +24,6 @@ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 *******************************************************************************/ - -#ifdef CONFIG_DEBUG_FS - #include <linux/debugfs.h> #include <linux/module.h> @@ -277,5 +274,3 @@ void ixgbe_dbg_exit(void) { debugfs_remove_recursive(ixgbe_dbg_root); } - -#endif /* CONFIG_DEBUG_FS */ diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index 32685842434..f4d2e9e3c6d 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -39,6 +39,7 @@ #include <linux/uaccess.h> #include "ixgbe.h" +#include "ixgbe_phy.h" #define IXGBE_ALL_RAR_ENTRIES 16 @@ -156,7 +157,7 @@ static int ixgbe_get_settings(struct net_device *netdev, struct ixgbe_hw *hw = &adapter->hw; ixgbe_link_speed supported_link; u32 link_speed = 0; - bool autoneg; + bool autoneg = false; bool link_up; hw->mac.ops.get_link_capabilities(hw, &supported_link, &autoneg); @@ -333,10 +334,10 @@ static int ixgbe_set_settings(struct net_device *netdev, return err; /* this sets the link speed and restarts auto-neg */ hw->mac.autotry_restart = true; - err = hw->mac.ops.setup_link(hw, advertised, true, true); + err = hw->mac.ops.setup_link(hw, advertised, true); if (err) { e_info(probe, "setup link failed with code %d\n", err); - hw->mac.ops.setup_link(hw, old, true, true); + hw->mac.ops.setup_link(hw, old, true); } } else { /* in this case we currently only support 10Gb/FULL */ @@ -1040,6 +1041,9 @@ static void ixgbe_get_ethtool_stats(struct net_device *netdev, p = (char *) adapter + ixgbe_gstrings_stats[i].stat_offset; break; + default: + data[i] = 0; + continue; } data[i] = (ixgbe_gstrings_stats[i].sizeof_stat == @@ -1096,8 +1100,10 @@ static void ixgbe_get_strings(struct net_device *netdev, u32 stringset, switch (stringset) { case ETH_SS_TEST: - memcpy(data, *ixgbe_gstrings_test, - IXGBE_TEST_LEN * ETH_GSTRING_LEN); + for (i = 0; i < IXGBE_TEST_LEN; i++) { + memcpy(data, ixgbe_gstrings_test[i], ETH_GSTRING_LEN); + data += ETH_GSTRING_LEN; + } break; case ETH_SS_STATS: for (i = 0; i < IXGBE_GLOBAL_STATS_LEN; i++) { @@ -1837,19 +1843,11 @@ static void ixgbe_diag_test(struct net_device *netdev, struct ethtool_test *eth_test, u64 *data) { struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; bool if_running = netif_running(netdev); set_bit(__IXGBE_TESTING, &adapter->state); if (eth_test->flags == ETH_TEST_FL_OFFLINE) { - /* Offline tests */ - - e_info(hw, "offline testing starting\n"); - - /* Link test performed before hardware reset so autoneg doesn't - * interfere with test result */ - if (ixgbe_link_test(adapter, &data[4])) - eth_test->flags |= ETH_TEST_FL_FAILED; - if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) { int i; for (i = 0; i < adapter->num_vfs; i++) { @@ -1870,12 +1868,24 @@ static void ixgbe_diag_test(struct net_device *netdev, } } + /* Offline tests */ + e_info(hw, "offline testing starting\n"); + if (if_running) /* indicate we're in test mode */ dev_close(netdev); - else - ixgbe_reset(adapter); + /* bringing adapter down disables SFP+ optics */ + if (hw->mac.ops.enable_tx_laser) + hw->mac.ops.enable_tx_laser(hw); + + /* Link test performed before hardware reset so autoneg doesn't + * interfere with test result + */ + if (ixgbe_link_test(adapter, &data[4])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + ixgbe_reset(adapter); e_info(hw, "register testing starting\n"); if (ixgbe_reg_test(adapter, &data[0])) eth_test->flags |= ETH_TEST_FL_FAILED; @@ -1908,16 +1918,22 @@ static void ixgbe_diag_test(struct net_device *netdev, skip_loopback: ixgbe_reset(adapter); + /* clear testing bit and return adapter to previous state */ clear_bit(__IXGBE_TESTING, &adapter->state); if (if_running) dev_open(netdev); } else { e_info(hw, "online testing starting\n"); + + /* if adapter is down, SFP+ optics will be disabled */ + if (!if_running && hw->mac.ops.enable_tx_laser) + hw->mac.ops.enable_tx_laser(hw); + /* Online tests */ if (ixgbe_link_test(adapter, &data[4])) eth_test->flags |= ETH_TEST_FL_FAILED; - /* Online tests aren't run; pass by default */ + /* Offline tests aren't run; pass by default */ data[0] = 0; data[1] = 0; data[2] = 0; @@ -1925,6 +1941,10 @@ skip_loopback: clear_bit(__IXGBE_TESTING, &adapter->state); } + + /* if adapter was down, ensure SFP+ optics are disabled again */ + if (!if_running && hw->mac.ops.disable_tx_laser) + hw->mac.ops.disable_tx_laser(hw); skip_ol_tests: msleep_interruptible(4 * 1000); } @@ -2093,13 +2113,17 @@ static int ixgbe_set_coalesce(struct net_device *netdev, struct ixgbe_adapter *adapter = netdev_priv(netdev); struct ixgbe_q_vector *q_vector; int i; - u16 tx_itr_param, rx_itr_param; + u16 tx_itr_param, rx_itr_param, tx_itr_prev; bool need_reset = false; - /* don't accept tx specific changes if we've got mixed RxTx vectors */ - if (adapter->q_vector[0]->tx.count && adapter->q_vector[0]->rx.count - && ec->tx_coalesce_usecs) - return -EINVAL; + if (adapter->q_vector[0]->tx.count && adapter->q_vector[0]->rx.count) { + /* reject Tx specific changes in case of mixed RxTx vectors */ + if (ec->tx_coalesce_usecs) + return -EINVAL; + tx_itr_prev = adapter->rx_itr_setting; + } else { + tx_itr_prev = adapter->tx_itr_setting; + } if ((ec->rx_coalesce_usecs > (IXGBE_MAX_EITR >> 2)) || (ec->tx_coalesce_usecs > (IXGBE_MAX_EITR >> 2))) @@ -2125,8 +2149,25 @@ static int ixgbe_set_coalesce(struct net_device *netdev, else tx_itr_param = adapter->tx_itr_setting; + /* mixed Rx/Tx */ + if (adapter->q_vector[0]->tx.count && adapter->q_vector[0]->rx.count) + adapter->tx_itr_setting = adapter->rx_itr_setting; + +#if IS_ENABLED(CONFIG_BQL) + /* detect ITR changes that require update of TXDCTL.WTHRESH */ + if ((adapter->tx_itr_setting > 1) && + (adapter->tx_itr_setting < IXGBE_100K_ITR)) { + if ((tx_itr_prev == 1) || + (tx_itr_prev > IXGBE_100K_ITR)) + need_reset = true; + } else { + if ((tx_itr_prev > 1) && + (tx_itr_prev < IXGBE_100K_ITR)) + need_reset = true; + } +#endif /* check the old value and enable RSC if necessary */ - need_reset = ixgbe_update_rsc(adapter); + need_reset |= ixgbe_update_rsc(adapter); for (i = 0; i < adapter->num_q_vectors; i++) { q_vector = adapter->q_vector[i]; @@ -2695,6 +2736,14 @@ static int ixgbe_get_ts_info(struct net_device *dev, (1 << HWTSTAMP_FILTER_NONE) | (1 << HWTSTAMP_FILTER_PTP_V1_L4_SYNC) | (1 << HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ) | + (1 << HWTSTAMP_FILTER_PTP_V2_L2_EVENT) | + (1 << HWTSTAMP_FILTER_PTP_V2_L4_EVENT) | + (1 << HWTSTAMP_FILTER_PTP_V2_SYNC) | + (1 << HWTSTAMP_FILTER_PTP_V2_L2_SYNC) | + (1 << HWTSTAMP_FILTER_PTP_V2_L4_SYNC) | + (1 << HWTSTAMP_FILTER_PTP_V2_DELAY_REQ) | + (1 << HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ) | + (1 << HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ) | (1 << HWTSTAMP_FILTER_PTP_V2_EVENT); break; default: @@ -2704,6 +2753,225 @@ static int ixgbe_get_ts_info(struct net_device *dev, return 0; } +static unsigned int ixgbe_max_channels(struct ixgbe_adapter *adapter) +{ + unsigned int max_combined; + u8 tcs = netdev_get_num_tc(adapter->netdev); + + if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) { + /* We only support one q_vector without MSI-X */ + max_combined = 1; + } else if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) { + /* SR-IOV currently only allows one queue on the PF */ + max_combined = 1; + } else if (tcs > 1) { + /* For DCB report channels per traffic class */ + if (adapter->hw.mac.type == ixgbe_mac_82598EB) { + /* 8 TC w/ 4 queues per TC */ + max_combined = 4; + } else if (tcs > 4) { + /* 8 TC w/ 8 queues per TC */ + max_combined = 8; + } else { + /* 4 TC w/ 16 queues per TC */ + max_combined = 16; + } + } else if (adapter->atr_sample_rate) { + /* support up to 64 queues with ATR */ + max_combined = IXGBE_MAX_FDIR_INDICES; + } else { + /* support up to 16 queues with RSS */ + max_combined = IXGBE_MAX_RSS_INDICES; + } + + return max_combined; +} + +static void ixgbe_get_channels(struct net_device *dev, + struct ethtool_channels *ch) +{ + struct ixgbe_adapter *adapter = netdev_priv(dev); + + /* report maximum channels */ + ch->max_combined = ixgbe_max_channels(adapter); + + /* report info for other vector */ + if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { + ch->max_other = NON_Q_VECTORS; + ch->other_count = NON_Q_VECTORS; + } + + /* record RSS queues */ + ch->combined_count = adapter->ring_feature[RING_F_RSS].indices; + + /* nothing else to report if RSS is disabled */ + if (ch->combined_count == 1) + return; + + /* we do not support ATR queueing if SR-IOV is enabled */ + if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) + return; + + /* same thing goes for being DCB enabled */ + if (netdev_get_num_tc(dev) > 1) + return; + + /* if ATR is disabled we can exit */ + if (!adapter->atr_sample_rate) + return; + + /* report flow director queues as maximum channels */ + ch->combined_count = adapter->ring_feature[RING_F_FDIR].indices; +} + +static int ixgbe_set_channels(struct net_device *dev, + struct ethtool_channels *ch) +{ + struct ixgbe_adapter *adapter = netdev_priv(dev); + unsigned int count = ch->combined_count; + + /* verify they are not requesting separate vectors */ + if (!count || ch->rx_count || ch->tx_count) + return -EINVAL; + + /* verify other_count has not changed */ + if (ch->other_count != NON_Q_VECTORS) + return -EINVAL; + + /* verify the number of channels does not exceed hardware limits */ + if (count > ixgbe_max_channels(adapter)) + return -EINVAL; + + /* update feature limits from largest to smallest supported values */ + adapter->ring_feature[RING_F_FDIR].limit = count; + + /* cap RSS limit at 16 */ + if (count > IXGBE_MAX_RSS_INDICES) + count = IXGBE_MAX_RSS_INDICES; + adapter->ring_feature[RING_F_RSS].limit = count; + +#ifdef IXGBE_FCOE + /* cap FCoE limit at 8 */ + if (count > IXGBE_FCRETA_SIZE) + count = IXGBE_FCRETA_SIZE; + adapter->ring_feature[RING_F_FCOE].limit = count; + +#endif + /* use setup TC to update any traffic class queue mapping */ + return ixgbe_setup_tc(dev, netdev_get_num_tc(dev)); +} + +static int ixgbe_get_module_info(struct net_device *dev, + struct ethtool_modinfo *modinfo) +{ + struct ixgbe_adapter *adapter = netdev_priv(dev); + struct ixgbe_hw *hw = &adapter->hw; + u32 status; + u8 sff8472_rev, addr_mode; + int ret_val = 0; + bool page_swap = false; + + /* avoid concurent i2c reads */ + while (test_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) + msleep(100); + + /* used by the service task */ + set_bit(__IXGBE_READ_I2C, &adapter->state); + + /* Check whether we support SFF-8472 or not */ + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_SFF_8472_COMP, + &sff8472_rev); + if (status != 0) { + ret_val = -EIO; + goto err_out; + } + + /* addressing mode is not supported */ + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_SFF_8472_SWAP, + &addr_mode); + if (status != 0) { + ret_val = -EIO; + goto err_out; + } + + if (addr_mode & IXGBE_SFF_ADDRESSING_MODE) { + e_err(drv, "Address change required to access page 0xA2, but not supported. Please report the module type to the driver maintainers.\n"); + page_swap = true; + } + + if (sff8472_rev == IXGBE_SFF_SFF_8472_UNSUP || page_swap) { + /* We have a SFP, but it does not support SFF-8472 */ + modinfo->type = ETH_MODULE_SFF_8079; + modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN; + } else { + /* We have a SFP which supports a revision of SFF-8472. */ + modinfo->type = ETH_MODULE_SFF_8472; + modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN; + } + +err_out: + clear_bit(__IXGBE_READ_I2C, &adapter->state); + return ret_val; +} + +static int ixgbe_get_module_eeprom(struct net_device *dev, + struct ethtool_eeprom *ee, + u8 *data) +{ + struct ixgbe_adapter *adapter = netdev_priv(dev); + struct ixgbe_hw *hw = &adapter->hw; + u32 status = IXGBE_ERR_PHY_ADDR_INVALID; + u8 databyte = 0xFF; + int i = 0; + int ret_val = 0; + + /* ixgbe_get_module_info is called before this function in all + * cases, so we do not need any checks we already do above, + * and can trust ee->len to be a known value. + */ + + while (test_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) + msleep(100); + set_bit(__IXGBE_READ_I2C, &adapter->state); + + /* Read the first block, SFF-8079 */ + for (i = 0; i < ETH_MODULE_SFF_8079_LEN; i++) { + status = hw->phy.ops.read_i2c_eeprom(hw, i, &databyte); + if (status != 0) { + /* Error occured while reading module */ + ret_val = -EIO; + goto err_out; + } + data[i] = databyte; + } + + /* If the second block is requested, check if SFF-8472 is supported. */ + if (ee->len == ETH_MODULE_SFF_8472_LEN) { + if (data[IXGBE_SFF_SFF_8472_COMP] == IXGBE_SFF_SFF_8472_UNSUP) + return -EOPNOTSUPP; + + /* Read the second block, SFF-8472 */ + for (i = ETH_MODULE_SFF_8079_LEN; + i < ETH_MODULE_SFF_8472_LEN; i++) { + status = hw->phy.ops.read_i2c_sff8472(hw, + i - ETH_MODULE_SFF_8079_LEN, &databyte); + if (status != 0) { + /* Error occured while reading module */ + ret_val = -EIO; + goto err_out; + } + data[i] = databyte; + } + } + +err_out: + clear_bit(__IXGBE_READ_I2C, &adapter->state); + + return ret_val; +} + static const struct ethtool_ops ixgbe_ethtool_ops = { .get_settings = ixgbe_get_settings, .set_settings = ixgbe_set_settings, @@ -2732,7 +3000,11 @@ static const struct ethtool_ops ixgbe_ethtool_ops = { .set_coalesce = ixgbe_set_coalesce, .get_rxnfc = ixgbe_get_rxnfc, .set_rxnfc = ixgbe_set_rxnfc, + .get_channels = ixgbe_get_channels, + .set_channels = ixgbe_set_channels, .get_ts_info = ixgbe_get_ts_info, + .get_module_info = ixgbe_get_module_info, + .get_module_eeprom = ixgbe_get_module_eeprom, }; void ixgbe_set_ethtool_ops(struct net_device *netdev) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c index 252850d9a3e..f58db453a97 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -544,15 +544,14 @@ int ixgbe_fso(struct ixgbe_ring *tx_ring, first->gso_segs = DIV_ROUND_UP(skb->len - *hdr_len, skb_shinfo(skb)->gso_size); first->bytecount += (first->gso_segs - 1) * *hdr_len; - first->tx_flags |= IXGBE_TX_FLAGS_FSO; + first->tx_flags |= IXGBE_TX_FLAGS_TSO; } /* set flag indicating FCOE to ixgbe_tx_map call */ - first->tx_flags |= IXGBE_TX_FLAGS_FCOE; + first->tx_flags |= IXGBE_TX_FLAGS_FCOE | IXGBE_TX_FLAGS_CC; - /* mss_l4len_id: use 1 for FSO as TSO, no need for L4LEN */ + /* mss_l4len_id: use 0 for FSO as TSO, no need for L4LEN */ mss_l4len_idx = skb_shinfo(skb)->gso_size << IXGBE_ADVTXD_MSS_SHIFT; - mss_l4len_idx |= 1 << IXGBE_ADVTXD_IDX_SHIFT; /* vlan_macip_lens: HEADLEN, MACLEN, VLAN tag */ vlan_macip_lens = skb_transport_offset(skb) + @@ -717,10 +716,8 @@ int ixgbe_setup_fcoe_ddp_resources(struct ixgbe_adapter *adapter) /* Extra buffer to be shared by all DDPs for HW work around */ buffer = kmalloc(IXGBE_FCBUFF_MIN, GFP_ATOMIC); - if (!buffer) { - e_err(drv, "failed to allocate extra DDP buffer\n"); + if (!buffer) return -ENOMEM; - } dma = dma_map_single(dev, buffer, IXGBE_FCBUFF_MIN, DMA_FROM_DEVICE); if (dma_mapping_error(dev, dma)) { diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.h index bf724da9937..3a02759b5e9 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c index 8c74f739011..ef5f7a678ce 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -386,7 +386,6 @@ static bool ixgbe_set_dcb_sriov_queues(struct ixgbe_adapter *adapter) fcoe = &adapter->ring_feature[RING_F_FCOE]; /* limit ourselves based on feature limits */ - fcoe_i = min_t(u16, fcoe_i, num_online_cpus()); fcoe_i = min_t(u16, fcoe_i, fcoe->limit); if (fcoe_i) { @@ -562,9 +561,6 @@ static bool ixgbe_set_sriov_queues(struct ixgbe_adapter *adapter) fcoe_i = min_t(u16, fcoe_i, fcoe->limit); if (vmdq_i > 1 && fcoe_i) { - /* reserve no more than number of CPUs */ - fcoe_i = min_t(u16, fcoe_i, num_online_cpus()); - /* alloc queues for FCoE separately */ fcoe->indices = fcoe_i; fcoe->offset = vmdq_i * rss_i; @@ -623,8 +619,7 @@ static bool ixgbe_set_rss_queues(struct ixgbe_adapter *adapter) if (rss_i > 1 && adapter->atr_sample_rate) { f = &adapter->ring_feature[RING_F_FDIR]; - f->indices = min_t(u16, num_online_cpus(), f->limit); - rss_i = max_t(u16, rss_i, f->indices); + rss_i = f->indices = f->limit; if (!(adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)) adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE; @@ -776,19 +771,23 @@ static int ixgbe_alloc_q_vector(struct ixgbe_adapter *adapter, { struct ixgbe_q_vector *q_vector; struct ixgbe_ring *ring; - int node = -1; + int node = NUMA_NO_NODE; int cpu = -1; int ring_count, size; + u8 tcs = netdev_get_num_tc(adapter->netdev); ring_count = txr_count + rxr_count; size = sizeof(struct ixgbe_q_vector) + (sizeof(struct ixgbe_ring) * ring_count); /* customize cpu for Flow Director mapping */ - if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) { - if (cpu_online(v_idx)) { - cpu = v_idx; - node = cpu_to_node(cpu); + if ((tcs <= 1) && !(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)) { + u16 rss_i = adapter->ring_feature[RING_F_RSS].indices; + if (rss_i > 1 && adapter->atr_sample_rate) { + if (cpu_online(v_idx)) { + cpu = v_idx; + node = cpu_to_node(cpu); + } } } diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 20a5af6d87d..68478d6dfa2 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -66,7 +66,7 @@ static char ixgbe_default_device_descr[] = #define DRV_VERSION "3.11.33-k" const char ixgbe_driver_version[] = DRV_VERSION; static const char ixgbe_copyright[] = - "Copyright (c) 1999-2012 Intel Corporation."; + "Copyright (c) 1999-2013 Intel Corporation."; static const struct ixgbe_info *ixgbe_info_tbl[] = { [board_82598] = &ixgbe_82598_info, @@ -803,6 +803,7 @@ static void ixgbe_tx_timeout_reset(struct ixgbe_adapter *adapter) /* Do the reset outside of interrupt context */ if (!test_bit(__IXGBE_DOWN, &adapter->state)) { adapter->flags2 |= IXGBE_FLAG2_RESET_REQUESTED; + e_warn(drv, "initiating reset due to tx timeout\n"); ixgbe_service_event_schedule(adapter); } } @@ -837,7 +838,7 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_q_vector *q_vector, break; /* prevent any other reads prior to eop_desc */ - rmb(); + read_barrier_depends(); /* if DD is not set pending work has not been completed */ if (!(eop_desc->wb.status & cpu_to_le32(IXGBE_TXD_STAT_DD))) @@ -850,9 +851,6 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_q_vector *q_vector, total_bytes += tx_buffer->bytecount; total_packets += tx_buffer->gso_segs; - if (unlikely(tx_buffer->tx_flags & IXGBE_TX_FLAGS_TSTAMP)) - ixgbe_ptp_tx_hwtstamp(q_vector, tx_buffer->skb); - /* free the skb */ dev_kfree_skb_any(tx_buffer->skb); @@ -1401,6 +1399,7 @@ static void ixgbe_set_rsc_gso_size(struct ixgbe_ring *ring, /* set gso_size to avoid messing up TCP MSS */ skb_shinfo(skb)->gso_size = DIV_ROUND_UP((skb->len - hdr_len), IXGBE_CB(skb)->append_cnt); + skb_shinfo(skb)->gso_type = SKB_GSO_TCPV4; } static void ixgbe_update_rsc_stats(struct ixgbe_ring *rx_ring, @@ -1441,7 +1440,7 @@ static void ixgbe_process_skb_fields(struct ixgbe_ring *rx_ring, ixgbe_rx_checksum(rx_ring, rx_desc, skb); - ixgbe_ptp_rx_hwtstamp(rx_ring->q_vector, rx_desc, skb); + ixgbe_ptp_rx_hwtstamp(rx_ring, rx_desc, skb); if ((dev->features & NETIF_F_HW_VLAN_RX) && ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_VP)) { @@ -2180,10 +2179,10 @@ static void ixgbe_check_overtemp_subtask(struct ixgbe_adapter *adapter) return; if (!(eicr & IXGBE_EICR_LSC) && hw->mac.ops.check_link) { - u32 autoneg; + u32 speed; bool link_up = false; - hw->mac.ops.check_link(hw, &autoneg, &link_up, false); + hw->mac.ops.check_link(hw, &speed, &link_up, false); if (link_up) return; @@ -2787,13 +2786,19 @@ void ixgbe_configure_tx_ring(struct ixgbe_adapter *adapter, /* * set WTHRESH to encourage burst writeback, it should not be set - * higher than 1 when ITR is 0 as it could cause false TX hangs + * higher than 1 when: + * - ITR is 0 as it could cause false TX hangs + * - ITR is set to > 100k int/sec and BQL is enabled * * In order to avoid issues WTHRESH + PTHRESH should always be equal * to or less than the number of on chip descriptors, which is * currently 40. */ +#if IS_ENABLED(CONFIG_BQL) + if (!ring->q_vector || (ring->q_vector->itr < IXGBE_100K_ITR)) +#else if (!ring->q_vector || (ring->q_vector->itr < 8)) +#endif txdctl |= (1 << 16); /* WTHRESH = 1 */ else txdctl |= (8 << 16); /* WTHRESH = 8 */ @@ -2814,6 +2819,16 @@ void ixgbe_configure_tx_ring(struct ixgbe_adapter *adapter, ring->atr_sample_rate = 0; } + /* initialize XPS */ + if (!test_and_set_bit(__IXGBE_TX_XPS_INIT_DONE, &ring->state)) { + struct ixgbe_q_vector *q_vector = ring->q_vector; + + if (q_vector) + netif_set_xps_queue(adapter->netdev, + &q_vector->affinity_mask, + ring->queue_index); + } + clear_bit(__IXGBE_HANG_CHECK_ARMED, &ring->state); /* enable queue */ @@ -3996,25 +4011,25 @@ static void ixgbe_sfp_link_config(struct ixgbe_adapter *adapter) **/ static int ixgbe_non_sfp_link_config(struct ixgbe_hw *hw) { - u32 autoneg; - bool negotiation, link_up = false; + u32 speed; + bool autoneg, link_up = false; u32 ret = IXGBE_ERR_LINK_SETUP; if (hw->mac.ops.check_link) - ret = hw->mac.ops.check_link(hw, &autoneg, &link_up, false); + ret = hw->mac.ops.check_link(hw, &speed, &link_up, false); if (ret) goto link_cfg_out; - autoneg = hw->phy.autoneg_advertised; - if ((!autoneg) && (hw->mac.ops.get_link_capabilities)) - ret = hw->mac.ops.get_link_capabilities(hw, &autoneg, - &negotiation); + speed = hw->phy.autoneg_advertised; + if ((!speed) && (hw->mac.ops.get_link_capabilities)) + ret = hw->mac.ops.get_link_capabilities(hw, &speed, + &autoneg); if (ret) goto link_cfg_out; if (hw->mac.ops.setup_link) - ret = hw->mac.ops.setup_link(hw, autoneg, negotiation, link_up); + ret = hw->mac.ops.setup_link(hw, speed, link_up); link_cfg_out: return ret; } @@ -4466,7 +4481,7 @@ static int ixgbe_sw_init(struct ixgbe_adapter *adapter) { struct ixgbe_hw *hw = &adapter->hw; struct pci_dev *pdev = adapter->pdev; - unsigned int rss; + unsigned int rss, fdir; u32 fwsm; #ifdef CONFIG_IXGBE_DCB int j; @@ -4481,38 +4496,57 @@ static int ixgbe_sw_init(struct ixgbe_adapter *adapter) hw->subsystem_vendor_id = pdev->subsystem_vendor; hw->subsystem_device_id = pdev->subsystem_device; - /* Set capability flags */ + /* Set common capability flags and settings */ rss = min_t(int, IXGBE_MAX_RSS_INDICES, num_online_cpus()); adapter->ring_feature[RING_F_RSS].limit = rss; + adapter->flags2 |= IXGBE_FLAG2_RSC_CAPABLE; + adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED; + adapter->max_q_vectors = MAX_Q_VECTORS_82599; + adapter->atr_sample_rate = 20; + fdir = min_t(int, IXGBE_MAX_FDIR_INDICES, num_online_cpus()); + adapter->ring_feature[RING_F_FDIR].limit = fdir; + adapter->fdir_pballoc = IXGBE_FDIR_PBALLOC_64K; +#ifdef CONFIG_IXGBE_DCA + adapter->flags |= IXGBE_FLAG_DCA_CAPABLE; +#endif +#ifdef IXGBE_FCOE + adapter->flags |= IXGBE_FLAG_FCOE_CAPABLE; + adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED; +#ifdef CONFIG_IXGBE_DCB + /* Default traffic class to use for FCoE */ + adapter->fcoe.up = IXGBE_FCOE_DEFTC; +#endif /* CONFIG_IXGBE_DCB */ +#endif /* IXGBE_FCOE */ + + /* Set MAC specific capability flags and exceptions */ switch (hw->mac.type) { case ixgbe_mac_82598EB: + adapter->flags2 &= ~IXGBE_FLAG2_RSC_CAPABLE; + adapter->flags2 &= ~IXGBE_FLAG2_RSC_ENABLED; + if (hw->device_id == IXGBE_DEV_ID_82598AT) adapter->flags |= IXGBE_FLAG_FAN_FAIL_CAPABLE; + adapter->max_q_vectors = MAX_Q_VECTORS_82598; + adapter->ring_feature[RING_F_FDIR].limit = 0; + adapter->atr_sample_rate = 0; + adapter->fdir_pballoc = 0; +#ifdef IXGBE_FCOE + adapter->flags &= ~IXGBE_FLAG_FCOE_CAPABLE; + adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED; +#ifdef CONFIG_IXGBE_DCB + adapter->fcoe.up = 0; +#endif /* IXGBE_DCB */ +#endif /* IXGBE_FCOE */ + break; + case ixgbe_mac_82599EB: + if (hw->device_id == IXGBE_DEV_ID_82599_T3_LOM) + adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_CAPABLE; break; case ixgbe_mac_X540: fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM); if (fwsm & IXGBE_FWSM_TS_ENABLED) adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_CAPABLE; - case ixgbe_mac_82599EB: - adapter->max_q_vectors = MAX_Q_VECTORS_82599; - adapter->flags2 |= IXGBE_FLAG2_RSC_CAPABLE; - adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED; - if (hw->device_id == IXGBE_DEV_ID_82599_T3_LOM) - adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_CAPABLE; - /* Flow Director hash filters enabled */ - adapter->atr_sample_rate = 20; - adapter->ring_feature[RING_F_FDIR].limit = - IXGBE_MAX_FDIR_INDICES; - adapter->fdir_pballoc = IXGBE_FDIR_PBALLOC_64K; -#ifdef IXGBE_FCOE - adapter->flags |= IXGBE_FLAG_FCOE_CAPABLE; - adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED; -#ifdef CONFIG_IXGBE_DCB - /* Default traffic class to use for FCoE */ - adapter->fcoe.up = IXGBE_FCOE_DEFTC; -#endif -#endif /* IXGBE_FCOE */ break; default: break; @@ -4871,7 +4905,7 @@ static int ixgbe_change_mtu(struct net_device *netdev, int new_mtu) */ if ((adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) && (adapter->hw.mac.type == ixgbe_mac_82599EB) && - (max_frame > MAXIMUM_ETHERNET_VLAN_SIZE)) + (max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN))) e_warn(probe, "Setting MTU > 1500 will disable legacy VFs\n"); e_info(probe, "changing MTU from %d to %d\n", netdev->mtu, new_mtu); @@ -5534,6 +5568,8 @@ static void ixgbe_watchdog_link_is_up(struct ixgbe_adapter *adapter) break; } + adapter->last_rx_ptp_check = jiffies; + if (adapter->flags2 & IXGBE_FLAG2_PTP_ENABLED) ixgbe_ptp_start_cyclecounter(adapter); @@ -5614,6 +5650,7 @@ static void ixgbe_watchdog_flush_tx(struct ixgbe_adapter *adapter) * to get done, so reset controller to flush Tx. * (Do the reset outside of interrupt context). */ + e_warn(drv, "initiating reset to clear Tx work after link loss\n"); adapter->flags2 |= IXGBE_FLAG2_RESET_REQUESTED; } } @@ -5678,6 +5715,10 @@ static void ixgbe_sfp_detection_subtask(struct ixgbe_adapter *adapter) !(adapter->flags2 & IXGBE_FLAG2_SFP_NEEDS_RESET)) return; + /* concurent i2c reads are not supported */ + if (test_bit(__IXGBE_READ_I2C, &adapter->state)) + return; + /* someone else is in init, wait until next service event */ if (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) return; @@ -5738,8 +5779,8 @@ sfp_out: static void ixgbe_sfp_link_config_subtask(struct ixgbe_adapter *adapter) { struct ixgbe_hw *hw = &adapter->hw; - u32 autoneg; - bool negotiation; + u32 speed; + bool autoneg = false; if (!(adapter->flags & IXGBE_FLAG_NEED_LINK_CONFIG)) return; @@ -5750,11 +5791,11 @@ static void ixgbe_sfp_link_config_subtask(struct ixgbe_adapter *adapter) adapter->flags &= ~IXGBE_FLAG_NEED_LINK_CONFIG; - autoneg = hw->phy.autoneg_advertised; - if ((!autoneg) && (hw->mac.ops.get_link_capabilities)) - hw->mac.ops.get_link_capabilities(hw, &autoneg, &negotiation); + speed = hw->phy.autoneg_advertised; + if ((!speed) && (hw->mac.ops.get_link_capabilities)) + hw->mac.ops.get_link_capabilities(hw, &speed, &autoneg); if (hw->mac.ops.setup_link) - hw->mac.ops.setup_link(hw, autoneg, negotiation, true); + hw->mac.ops.setup_link(hw, speed, true); adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE; adapter->link_check_timeout = jiffies; @@ -5878,7 +5919,6 @@ static void ixgbe_service_task(struct work_struct *work) struct ixgbe_adapter *adapter = container_of(work, struct ixgbe_adapter, service_task); - ixgbe_reset_subtask(adapter); ixgbe_sfp_detection_subtask(adapter); ixgbe_sfp_link_config_subtask(adapter); @@ -5886,7 +5926,11 @@ static void ixgbe_service_task(struct work_struct *work) ixgbe_watchdog_subtask(adapter); ixgbe_fdir_reinit_subtask(adapter); ixgbe_check_hang_subtask(adapter); - ixgbe_ptp_overflow_check(adapter); + + if (adapter->flags2 & IXGBE_FLAG2_PTP_ENABLED) { + ixgbe_ptp_overflow_check(adapter); + ixgbe_ptp_rx_hang(adapter); + } ixgbe_service_event_complete(adapter); } @@ -5899,6 +5943,9 @@ static int ixgbe_tso(struct ixgbe_ring *tx_ring, u32 vlan_macip_lens, type_tucmd; u32 mss_l4len_idx, l4len; + if (skb->ip_summed != CHECKSUM_PARTIAL) + return 0; + if (!skb_is_gso(skb)) return 0; @@ -5941,10 +5988,9 @@ static int ixgbe_tso(struct ixgbe_ring *tx_ring, first->gso_segs = skb_shinfo(skb)->gso_segs; first->bytecount += (first->gso_segs - 1) * *hdr_len; - /* mss_l4len_id: use 1 as index for TSO */ + /* mss_l4len_id: use 0 as index for TSO */ mss_l4len_idx = l4len << IXGBE_ADVTXD_L4LEN_SHIFT; mss_l4len_idx |= skb_shinfo(skb)->gso_size << IXGBE_ADVTXD_MSS_SHIFT; - mss_l4len_idx |= 1 << IXGBE_ADVTXD_IDX_SHIFT; /* vlan_macip_lens: HEADLEN, MACLEN, VLAN tag */ vlan_macip_lens = skb_network_header_len(skb); @@ -5966,12 +6012,9 @@ static void ixgbe_tx_csum(struct ixgbe_ring *tx_ring, u32 type_tucmd = 0; if (skb->ip_summed != CHECKSUM_PARTIAL) { - if (!(first->tx_flags & IXGBE_TX_FLAGS_HW_VLAN)) { - if (unlikely(skb->no_fcs)) - first->tx_flags |= IXGBE_TX_FLAGS_NO_IFCS; - if (!(first->tx_flags & IXGBE_TX_FLAGS_TXSW)) - return; - } + if (!(first->tx_flags & IXGBE_TX_FLAGS_HW_VLAN) && + !(first->tx_flags & IXGBE_TX_FLAGS_CC)) + return; } else { u8 l4_hdr = 0; switch (first->protocol) { @@ -6029,30 +6072,32 @@ static void ixgbe_tx_csum(struct ixgbe_ring *tx_ring, type_tucmd, mss_l4len_idx); } -static __le32 ixgbe_tx_cmd_type(u32 tx_flags) +#define IXGBE_SET_FLAG(_input, _flag, _result) \ + ((_flag <= _result) ? \ + ((u32)(_input & _flag) * (_result / _flag)) : \ + ((u32)(_input & _flag) / (_flag / _result))) + +static u32 ixgbe_tx_cmd_type(struct sk_buff *skb, u32 tx_flags) { /* set type for advanced descriptor with frame checksum insertion */ - __le32 cmd_type = cpu_to_le32(IXGBE_ADVTXD_DTYP_DATA | - IXGBE_ADVTXD_DCMD_DEXT); + u32 cmd_type = IXGBE_ADVTXD_DTYP_DATA | + IXGBE_ADVTXD_DCMD_DEXT | + IXGBE_ADVTXD_DCMD_IFCS; /* set HW vlan bit if vlan is present */ - if (tx_flags & IXGBE_TX_FLAGS_HW_VLAN) - cmd_type |= cpu_to_le32(IXGBE_ADVTXD_DCMD_VLE); - - if (tx_flags & IXGBE_TX_FLAGS_TSTAMP) - cmd_type |= cpu_to_le32(IXGBE_ADVTXD_MAC_TSTAMP); + cmd_type |= IXGBE_SET_FLAG(tx_flags, IXGBE_TX_FLAGS_HW_VLAN, + IXGBE_ADVTXD_DCMD_VLE); /* set segmentation enable bits for TSO/FSO */ -#ifdef IXGBE_FCOE - if (tx_flags & (IXGBE_TX_FLAGS_TSO | IXGBE_TX_FLAGS_FSO)) -#else - if (tx_flags & IXGBE_TX_FLAGS_TSO) -#endif - cmd_type |= cpu_to_le32(IXGBE_ADVTXD_DCMD_TSE); + cmd_type |= IXGBE_SET_FLAG(tx_flags, IXGBE_TX_FLAGS_TSO, + IXGBE_ADVTXD_DCMD_TSE); + + /* set timestamp bit if present */ + cmd_type |= IXGBE_SET_FLAG(tx_flags, IXGBE_TX_FLAGS_TSTAMP, + IXGBE_ADVTXD_MAC_TSTAMP); /* insert frame checksum */ - if (!(tx_flags & IXGBE_TX_FLAGS_NO_IFCS)) - cmd_type |= cpu_to_le32(IXGBE_ADVTXD_DCMD_IFCS); + cmd_type ^= IXGBE_SET_FLAG(skb->no_fcs, 1, IXGBE_ADVTXD_DCMD_IFCS); return cmd_type; } @@ -6060,36 +6105,27 @@ static __le32 ixgbe_tx_cmd_type(u32 tx_flags) static void ixgbe_tx_olinfo_status(union ixgbe_adv_tx_desc *tx_desc, u32 tx_flags, unsigned int paylen) { - __le32 olinfo_status = cpu_to_le32(paylen << IXGBE_ADVTXD_PAYLEN_SHIFT); + u32 olinfo_status = paylen << IXGBE_ADVTXD_PAYLEN_SHIFT; /* enable L4 checksum for TSO and TX checksum offload */ - if (tx_flags & IXGBE_TX_FLAGS_CSUM) - olinfo_status |= cpu_to_le32(IXGBE_ADVTXD_POPTS_TXSM); + olinfo_status |= IXGBE_SET_FLAG(tx_flags, + IXGBE_TX_FLAGS_CSUM, + IXGBE_ADVTXD_POPTS_TXSM); /* enble IPv4 checksum for TSO */ - if (tx_flags & IXGBE_TX_FLAGS_IPV4) - olinfo_status |= cpu_to_le32(IXGBE_ADVTXD_POPTS_IXSM); - - /* use index 1 context for TSO/FSO/FCOE */ -#ifdef IXGBE_FCOE - if (tx_flags & (IXGBE_TX_FLAGS_TSO | IXGBE_TX_FLAGS_FCOE)) -#else - if (tx_flags & IXGBE_TX_FLAGS_TSO) -#endif - olinfo_status |= cpu_to_le32(1 << IXGBE_ADVTXD_IDX_SHIFT); + olinfo_status |= IXGBE_SET_FLAG(tx_flags, + IXGBE_TX_FLAGS_IPV4, + IXGBE_ADVTXD_POPTS_IXSM); /* * Check Context must be set if Tx switch is enabled, which it * always is for case where virtual functions are running */ -#ifdef IXGBE_FCOE - if (tx_flags & (IXGBE_TX_FLAGS_TXSW | IXGBE_TX_FLAGS_FCOE)) -#else - if (tx_flags & IXGBE_TX_FLAGS_TXSW) -#endif - olinfo_status |= cpu_to_le32(IXGBE_ADVTXD_CC); + olinfo_status |= IXGBE_SET_FLAG(tx_flags, + IXGBE_TX_FLAGS_CC, + IXGBE_ADVTXD_CC); - tx_desc->read.olinfo_status = olinfo_status; + tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status); } #define IXGBE_TXD_CMD (IXGBE_TXD_CMD_EOP | \ @@ -6099,22 +6135,22 @@ static void ixgbe_tx_map(struct ixgbe_ring *tx_ring, struct ixgbe_tx_buffer *first, const u8 hdr_len) { - dma_addr_t dma; struct sk_buff *skb = first->skb; struct ixgbe_tx_buffer *tx_buffer; union ixgbe_adv_tx_desc *tx_desc; - struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[0]; - unsigned int data_len = skb->data_len; - unsigned int size = skb_headlen(skb); - unsigned int paylen = skb->len - hdr_len; + struct skb_frag_struct *frag; + dma_addr_t dma; + unsigned int data_len, size; u32 tx_flags = first->tx_flags; - __le32 cmd_type; + u32 cmd_type = ixgbe_tx_cmd_type(skb, tx_flags); u16 i = tx_ring->next_to_use; tx_desc = IXGBE_TX_DESC(tx_ring, i); - ixgbe_tx_olinfo_status(tx_desc, tx_flags, paylen); - cmd_type = ixgbe_tx_cmd_type(tx_flags); + ixgbe_tx_olinfo_status(tx_desc, tx_flags, skb->len - hdr_len); + + size = skb_headlen(skb); + data_len = skb->data_len; #ifdef IXGBE_FCOE if (tx_flags & IXGBE_TX_FLAGS_FCOE) { @@ -6128,19 +6164,22 @@ static void ixgbe_tx_map(struct ixgbe_ring *tx_ring, #endif dma = dma_map_single(tx_ring->dev, skb->data, size, DMA_TO_DEVICE); - if (dma_mapping_error(tx_ring->dev, dma)) - goto dma_error; - /* record length, and DMA address */ - dma_unmap_len_set(first, len, size); - dma_unmap_addr_set(first, dma, dma); + tx_buffer = first; - tx_desc->read.buffer_addr = cpu_to_le64(dma); + for (frag = &skb_shinfo(skb)->frags[0];; frag++) { + if (dma_mapping_error(tx_ring->dev, dma)) + goto dma_error; + + /* record length, and DMA address */ + dma_unmap_len_set(tx_buffer, len, size); + dma_unmap_addr_set(tx_buffer, dma, dma); + + tx_desc->read.buffer_addr = cpu_to_le64(dma); - for (;;) { while (unlikely(size > IXGBE_MAX_DATA_PER_TXD)) { tx_desc->read.cmd_type_len = - cmd_type | cpu_to_le32(IXGBE_MAX_DATA_PER_TXD); + cpu_to_le32(cmd_type ^ IXGBE_MAX_DATA_PER_TXD); i++; tx_desc++; @@ -6148,18 +6187,18 @@ static void ixgbe_tx_map(struct ixgbe_ring *tx_ring, tx_desc = IXGBE_TX_DESC(tx_ring, 0); i = 0; } + tx_desc->read.olinfo_status = 0; dma += IXGBE_MAX_DATA_PER_TXD; size -= IXGBE_MAX_DATA_PER_TXD; tx_desc->read.buffer_addr = cpu_to_le64(dma); - tx_desc->read.olinfo_status = 0; } if (likely(!data_len)) break; - tx_desc->read.cmd_type_len = cmd_type | cpu_to_le32(size); + tx_desc->read.cmd_type_len = cpu_to_le32(cmd_type ^ size); i++; tx_desc++; @@ -6167,6 +6206,7 @@ static void ixgbe_tx_map(struct ixgbe_ring *tx_ring, tx_desc = IXGBE_TX_DESC(tx_ring, 0); i = 0; } + tx_desc->read.olinfo_status = 0; #ifdef IXGBE_FCOE size = min_t(unsigned int, data_len, skb_frag_size(frag)); @@ -6177,22 +6217,13 @@ static void ixgbe_tx_map(struct ixgbe_ring *tx_ring, dma = skb_frag_dma_map(tx_ring->dev, frag, 0, size, DMA_TO_DEVICE); - if (dma_mapping_error(tx_ring->dev, dma)) - goto dma_error; tx_buffer = &tx_ring->tx_buffer_info[i]; - dma_unmap_len_set(tx_buffer, len, size); - dma_unmap_addr_set(tx_buffer, dma, dma); - - tx_desc->read.buffer_addr = cpu_to_le64(dma); - tx_desc->read.olinfo_status = 0; - - frag++; } /* write last descriptor with RS and EOP bits */ - cmd_type |= cpu_to_le32(size) | cpu_to_le32(IXGBE_TXD_CMD); - tx_desc->read.cmd_type_len = cmd_type; + cmd_type |= size | IXGBE_TXD_CMD; + tx_desc->read.cmd_type_len = cpu_to_le32(cmd_type); netdev_tx_sent_queue(txring_txq(tx_ring), first->bytecount); @@ -6353,38 +6384,40 @@ static inline int ixgbe_maybe_stop_tx(struct ixgbe_ring *tx_ring, u16 size) return __ixgbe_maybe_stop_tx(tx_ring, size); } +#ifdef IXGBE_FCOE static u16 ixgbe_select_queue(struct net_device *dev, struct sk_buff *skb) { - struct ixgbe_adapter *adapter = netdev_priv(dev); - int txq = skb_rx_queue_recorded(skb) ? skb_get_rx_queue(skb) : - smp_processor_id(); -#ifdef IXGBE_FCOE - __be16 protocol = vlan_get_protocol(skb); + struct ixgbe_adapter *adapter; + struct ixgbe_ring_feature *f; + int txq; - if (((protocol == htons(ETH_P_FCOE)) || - (protocol == htons(ETH_P_FIP))) && - (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)) { - struct ixgbe_ring_feature *f; + /* + * only execute the code below if protocol is FCoE + * or FIP and we have FCoE enabled on the adapter + */ + switch (vlan_get_protocol(skb)) { + case __constant_htons(ETH_P_FCOE): + case __constant_htons(ETH_P_FIP): + adapter = netdev_priv(dev); - f = &adapter->ring_feature[RING_F_FCOE]; + if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) + break; + default: + return __netdev_pick_tx(dev, skb); + } - while (txq >= f->indices) - txq -= f->indices; - txq += adapter->ring_feature[RING_F_FCOE].offset; + f = &adapter->ring_feature[RING_F_FCOE]; - return txq; - } -#endif + txq = skb_rx_queue_recorded(skb) ? skb_get_rx_queue(skb) : + smp_processor_id(); - if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) { - while (unlikely(txq >= dev->real_num_tx_queues)) - txq -= dev->real_num_tx_queues; - return txq; - } + while (txq >= f->indices) + txq -= f->indices; - return skb_tx_hash(dev, skb); + return txq + f->offset; } +#endif netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb, struct ixgbe_adapter *adapter, struct ixgbe_ring *tx_ring) @@ -6445,6 +6478,11 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb, if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) { skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; tx_flags |= IXGBE_TX_FLAGS_TSTAMP; + + /* schedule check for Tx timestamp */ + adapter->ptp_tx_skb = skb_get(skb); + adapter->ptp_tx_start = jiffies; + schedule_work(&adapter->ptp_tx_work); } #ifdef CONFIG_PCI_IOV @@ -6453,7 +6491,7 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb, * Tx switch had been disabled. */ if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) - tx_flags |= IXGBE_TX_FLAGS_TXSW; + tx_flags |= IXGBE_TX_FLAGS_CC; #endif /* DCB maps skb priorities 0-7 onto 3 bit PCP of VLAN tag. */ @@ -6784,6 +6822,7 @@ static void ixgbe_set_prio_tc_map(struct ixgbe_adapter *adapter) } } +#endif /* CONFIG_IXGBE_DCB */ /** * ixgbe_setup_tc - configure net_device for multiple traffic classes * @@ -6809,6 +6848,7 @@ int ixgbe_setup_tc(struct net_device *dev, u8 tc) ixgbe_close(dev); ixgbe_clear_interrupt_scheme(adapter); +#ifdef CONFIG_IXGBE_DCB if (tc) { netdev_set_num_tc(dev, tc); ixgbe_set_prio_tc_map(adapter); @@ -6831,15 +6871,28 @@ int ixgbe_setup_tc(struct net_device *dev, u8 tc) adapter->dcb_cfg.pfc_mode_enable = false; } - ixgbe_init_interrupt_scheme(adapter); ixgbe_validate_rtr(adapter, tc); + +#endif /* CONFIG_IXGBE_DCB */ + ixgbe_init_interrupt_scheme(adapter); + if (netif_running(dev)) - ixgbe_open(dev); + return ixgbe_open(dev); return 0; } -#endif /* CONFIG_IXGBE_DCB */ +#ifdef CONFIG_PCI_IOV +void ixgbe_sriov_reinit(struct ixgbe_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + + rtnl_lock(); + ixgbe_setup_tc(netdev, netdev_get_num_tc(netdev)); + rtnl_unlock(); +} + +#endif void ixgbe_do_reset(struct net_device *netdev) { struct ixgbe_adapter *adapter = netdev_priv(netdev); @@ -6985,7 +7038,7 @@ static int ixgbe_ndo_fdb_add(struct ndmsg *ndm, struct nlattr *tb[], return err; } -static int ixgbe_ndo_fdb_del(struct ndmsg *ndm, +static int ixgbe_ndo_fdb_del(struct ndmsg *ndm, struct nlattr *tb[], struct net_device *dev, const unsigned char *addr) { @@ -7062,7 +7115,8 @@ static int ixgbe_ndo_bridge_setlink(struct net_device *dev, } static int ixgbe_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq, - struct net_device *dev) + struct net_device *dev, + u32 filter_mask) { struct ixgbe_adapter *adapter = netdev_priv(dev); u16 mode; @@ -7082,7 +7136,9 @@ static const struct net_device_ops ixgbe_netdev_ops = { .ndo_open = ixgbe_open, .ndo_stop = ixgbe_close, .ndo_start_xmit = ixgbe_xmit_frame, +#ifdef IXGBE_FCOE .ndo_select_queue = ixgbe_select_queue, +#endif .ndo_set_rx_mode = ixgbe_set_rx_mode, .ndo_validate_addr = eth_validate_addr, .ndo_set_mac_address = ixgbe_set_mac, @@ -7194,9 +7250,8 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent) const struct ixgbe_info *ii = ixgbe_info_tbl[ent->driver_data]; static int cards_found; int i, err, pci_using_dac; + unsigned int indices = MAX_TX_QUEUES; u8 part_str[IXGBE_PBANUM_LENGTH]; - unsigned int indices = num_possible_cpus(); - unsigned int dcb_max = 0; #ifdef IXGBE_FCOE u16 device_caps; #endif @@ -7245,25 +7300,15 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent) pci_set_master(pdev); pci_save_state(pdev); + if (ii->mac == ixgbe_mac_82598EB) { #ifdef CONFIG_IXGBE_DCB - if (ii->mac == ixgbe_mac_82598EB) - dcb_max = min_t(unsigned int, indices * MAX_TRAFFIC_CLASS, - IXGBE_MAX_RSS_INDICES); - else - dcb_max = min_t(unsigned int, indices * MAX_TRAFFIC_CLASS, - IXGBE_MAX_FDIR_INDICES); + /* 8 TC w/ 4 queues per TC */ + indices = 4 * MAX_TRAFFIC_CLASS; +#else + indices = IXGBE_MAX_RSS_INDICES; #endif + } - if (ii->mac == ixgbe_mac_82598EB) - indices = min_t(unsigned int, indices, IXGBE_MAX_RSS_INDICES); - else - indices = min_t(unsigned int, indices, IXGBE_MAX_FDIR_INDICES); - -#ifdef IXGBE_FCOE - indices += min_t(unsigned int, num_possible_cpus(), - IXGBE_MAX_FCOE_INDICES); -#endif - indices = max_t(unsigned int, dcb_max, indices); netdev = alloc_etherdev_mq(sizeof(struct ixgbe_adapter), indices); if (!netdev) { err = -ENOMEM; @@ -7366,7 +7411,15 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } #ifdef CONFIG_PCI_IOV - ixgbe_enable_sriov(adapter, ii); + /* SR-IOV not supported on the 82598 */ + if (adapter->hw.mac.type == ixgbe_mac_82598EB) + goto skip_sriov; + /* Mailbox */ + ixgbe_init_mbx_params_pf(hw); + memcpy(&hw->mbx.ops, ii->mbx_ops, sizeof(hw->mbx.ops)); + ixgbe_enable_sriov(adapter); + pci_sriov_set_totalvfs(pdev, 63); +skip_sriov: #endif netdev->features = NETIF_F_SG | @@ -7410,13 +7463,17 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent) #ifdef IXGBE_FCOE if (adapter->flags & IXGBE_FLAG_FCOE_CAPABLE) { + unsigned int fcoe_l; + if (hw->mac.ops.get_device_caps) { hw->mac.ops.get_device_caps(hw, &device_caps); if (device_caps & IXGBE_DEVICE_CAPS_FCOE_OFFLOADS) adapter->flags &= ~IXGBE_FLAG_FCOE_CAPABLE; } - adapter->ring_feature[RING_F_FCOE].limit = IXGBE_FCRETA_SIZE; + + fcoe_l = min_t(int, IXGBE_FCRETA_SIZE, num_online_cpus()); + adapter->ring_feature[RING_F_FCOE].limit = fcoe_l; netdev->features |= NETIF_F_FSO | NETIF_F_FCOE_CRC; @@ -7444,9 +7501,8 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } memcpy(netdev->dev_addr, hw->mac.perm_addr, netdev->addr_len); - memcpy(netdev->perm_addr, hw->mac.perm_addr, netdev->addr_len); - if (!is_valid_ether_addr(netdev->perm_addr)) { + if (!is_valid_ether_addr(netdev->dev_addr)) { e_dev_err("invalid MAC address\n"); err = -EIO; goto err_sw_init; @@ -7623,8 +7679,14 @@ static void ixgbe_remove(struct pci_dev *pdev) if (netdev->reg_state == NETREG_REGISTERED) unregister_netdev(netdev); - ixgbe_disable_sriov(adapter); - +#ifdef CONFIG_PCI_IOV + /* + * Only disable SR-IOV on unload if the user specified the now + * deprecated max_vfs module parameter. + */ + if (max_vfs) + ixgbe_disable_sriov(adapter); +#endif ixgbe_clear_interrupt_scheme(adapter); ixgbe_release_hw_control(adapter); @@ -7729,6 +7791,8 @@ static pci_ers_result_t ixgbe_io_error_detected(struct pci_dev *pdev, if (vfdev) { e_dev_err("Issuing VFLR to VF %d\n", vf); pci_write_config_dword(vfdev, 0xA8, 0x00008000); + /* Free device reference count */ + pci_dev_put(vfdev); } pci_cleanup_aer_uncorrect_error_status(pdev); @@ -7838,6 +7902,7 @@ static struct pci_driver ixgbe_driver = { .resume = ixgbe_resume, #endif .shutdown = ixgbe_shutdown, + .sriov_configure = ixgbe_pci_sriov_configure, .err_handler = &ixgbe_err_handler }; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.c index 1f3e32b576a..d4a64e66539 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h index 42dd65e6ac9..e44ff47659b 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c index 71659edf81a..060d2ad2ac9 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -494,11 +494,9 @@ s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw) * ixgbe_setup_phy_link_speed_generic - Sets the auto advertised capabilities * @hw: pointer to hardware structure * @speed: new link speed - * @autoneg: true if autonegotiation enabled **/ s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw, ixgbe_link_speed speed, - bool autoneg, bool autoneg_wait_to_complete) { @@ -854,11 +852,9 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_IDENTIFIER, - &identifier); + &identifier); - if (status == IXGBE_ERR_SWFW_SYNC || - status == IXGBE_ERR_I2C || - status == IXGBE_ERR_SFP_NOT_PRESENT) + if (status != 0) goto err_read_i2c_eeprom; /* LAN ID is needed for sfp_type determination */ @@ -872,26 +868,20 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) IXGBE_SFF_1GBE_COMP_CODES, &comp_codes_1g); - if (status == IXGBE_ERR_SWFW_SYNC || - status == IXGBE_ERR_I2C || - status == IXGBE_ERR_SFP_NOT_PRESENT) + if (status != 0) goto err_read_i2c_eeprom; status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_10GBE_COMP_CODES, &comp_codes_10g); - if (status == IXGBE_ERR_SWFW_SYNC || - status == IXGBE_ERR_I2C || - status == IXGBE_ERR_SFP_NOT_PRESENT) + if (status != 0) goto err_read_i2c_eeprom; status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_CABLE_TECHNOLOGY, &cable_tech); - if (status == IXGBE_ERR_SWFW_SYNC || - status == IXGBE_ERR_I2C || - status == IXGBE_ERR_SFP_NOT_PRESENT) + if (status != 0) goto err_read_i2c_eeprom; /* ID Module @@ -986,30 +976,24 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) if (hw->phy.type != ixgbe_phy_nl) { hw->phy.id = identifier; status = hw->phy.ops.read_i2c_eeprom(hw, - IXGBE_SFF_VENDOR_OUI_BYTE0, - &oui_bytes[0]); + IXGBE_SFF_VENDOR_OUI_BYTE0, + &oui_bytes[0]); - if (status == IXGBE_ERR_SWFW_SYNC || - status == IXGBE_ERR_I2C || - status == IXGBE_ERR_SFP_NOT_PRESENT) + if (status != 0) goto err_read_i2c_eeprom; status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_VENDOR_OUI_BYTE1, &oui_bytes[1]); - if (status == IXGBE_ERR_SWFW_SYNC || - status == IXGBE_ERR_I2C || - status == IXGBE_ERR_SFP_NOT_PRESENT) + if (status != 0) goto err_read_i2c_eeprom; status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_VENDOR_OUI_BYTE2, &oui_bytes[2]); - if (status == IXGBE_ERR_SWFW_SYNC || - status == IXGBE_ERR_I2C || - status == IXGBE_ERR_SFP_NOT_PRESENT) + if (status != 0) goto err_read_i2c_eeprom; vendor_oui = @@ -1206,6 +1190,22 @@ s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, } /** + * ixgbe_read_i2c_sff8472_generic - Reads 8 bit word over I2C interface + * @hw: pointer to hardware structure + * @byte_offset: byte offset at address 0xA2 + * @eeprom_data: value read + * + * Performs byte read operation to SFP module's SFF-8472 data over I2C + **/ +s32 ixgbe_read_i2c_sff8472_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 *sff8472_data) +{ + return hw->phy.ops.read_i2c_byte(hw, byte_offset, + IXGBE_I2C_EEPROM_DEV_ADDR2, + sff8472_data); +} + +/** * ixgbe_write_i2c_eeprom_generic - Writes 8 bit EEPROM word over I2C interface * @hw: pointer to hardware structure * @byte_offset: EEPROM byte offset to write @@ -1293,9 +1293,9 @@ s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, break; fail: + ixgbe_i2c_bus_clear(hw); hw->mac.ops.release_swfw_sync(hw, swfw_mask); msleep(100); - ixgbe_i2c_bus_clear(hw); retry++; if (retry < max_retry) hw_dbg(hw, "I2C byte read error - Retrying.\n"); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h index cc18165b4c0..886a3431cf5 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -30,6 +30,7 @@ #include "ixgbe_type.h" #define IXGBE_I2C_EEPROM_DEV_ADDR 0xA0 +#define IXGBE_I2C_EEPROM_DEV_ADDR2 0xA2 /* EEPROM byte offsets */ #define IXGBE_SFF_IDENTIFIER 0x0 @@ -41,6 +42,8 @@ #define IXGBE_SFF_10GBE_COMP_CODES 0x3 #define IXGBE_SFF_CABLE_TECHNOLOGY 0x8 #define IXGBE_SFF_CABLE_SPEC_COMP 0x3C +#define IXGBE_SFF_SFF_8472_SWAP 0x5C +#define IXGBE_SFF_SFF_8472_COMP 0x5E /* Bitmasks */ #define IXGBE_SFF_DA_PASSIVE_CABLE 0x4 @@ -51,6 +54,7 @@ #define IXGBE_SFF_1GBASET_CAPABLE 0x8 #define IXGBE_SFF_10GBASESR_CAPABLE 0x10 #define IXGBE_SFF_10GBASELR_CAPABLE 0x20 +#define IXGBE_SFF_ADDRESSING_MODE 0x4 #define IXGBE_I2C_EEPROM_READ_MASK 0x100 #define IXGBE_I2C_EEPROM_STATUS_MASK 0x3 #define IXGBE_I2C_EEPROM_STATUS_NO_OPERATION 0x0 @@ -88,6 +92,9 @@ #define IXGBE_TN_LASI_STATUS_REG 0x9005 #define IXGBE_TN_LASI_STATUS_TEMP_ALARM 0x0008 +/* SFP+ SFF-8472 Compliance code */ +#define IXGBE_SFF_SFF_8472_UNSUP 0x00 + s32 ixgbe_init_phy_ops_generic(struct ixgbe_hw *hw); s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw); s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw); @@ -98,7 +105,6 @@ s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw); s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw, ixgbe_link_speed speed, - bool autoneg, bool autoneg_wait_to_complete); s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed, @@ -126,6 +132,8 @@ s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr, u8 data); s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, u8 *eeprom_data); +s32 ixgbe_read_i2c_sff8472_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 *sff8472_data); s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, u8 eeprom_data); #endif /* _IXGBE_PHY_H_ */ diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c index 1a751c9d09c..331987d6815 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -96,15 +96,12 @@ #define IXGBE_MAX_TIMEADJ_VALUE 0x7FFFFFFFFFFFFFFFULL #define IXGBE_OVERFLOW_PERIOD (HZ * 30) +#define IXGBE_PTP_TX_TIMEOUT (HZ * 15) #ifndef NSECS_PER_SEC #define NSECS_PER_SEC 1000000000ULL #endif -static struct sock_filter ptp_filter[] = { - PTP_FILTER -}; - /** * ixgbe_ptp_setup_sdp * @hw: the hardware private structure @@ -405,149 +402,145 @@ void ixgbe_ptp_check_pps_event(struct ixgbe_adapter *adapter, u32 eicr) } } - /** - * ixgbe_ptp_overflow_check - delayed work to detect SYSTIME overflow - * @work: structure containing information about this work task + * ixgbe_ptp_overflow_check - watchdog task to detect SYSTIME overflow + * @adapter: private adapter struct * - * this work function is scheduled to continue reading the timecounter + * this watchdog task periodically reads the timecounter * in order to prevent missing when the system time registers wrap - * around. This needs to be run approximately twice a minute when no - * PTP activity is occurring. + * around. This needs to be run approximately twice a minute. */ void ixgbe_ptp_overflow_check(struct ixgbe_adapter *adapter) { - unsigned long elapsed_jiffies = adapter->last_overflow_check - jiffies; + bool timeout = time_is_before_jiffies(adapter->last_overflow_check + + IXGBE_OVERFLOW_PERIOD); struct timespec ts; - if ((adapter->flags2 & IXGBE_FLAG2_PTP_ENABLED) && - (elapsed_jiffies >= IXGBE_OVERFLOW_PERIOD)) { + if (timeout) { ixgbe_ptp_gettime(&adapter->ptp_caps, &ts); adapter->last_overflow_check = jiffies; } } /** - * ixgbe_ptp_match - determine if this skb matches a ptp packet - * @skb: pointer to the skb - * @hwtstamp: pointer to the hwtstamp_config to check - * - * Determine whether the skb should have been timestamped, assuming the - * hwtstamp was set via the hwtstamp ioctl. Returns non-zero when the packet - * should have a timestamp waiting in the registers, and 0 otherwise. + * ixgbe_ptp_rx_hang - detect error case when Rx timestamp registers latched + * @adapter: private network adapter structure * - * V1 packets have to check the version type to determine whether they are - * correct. However, we can't directly access the data because it might be - * fragmented in the SKB, in paged memory. In order to work around this, we - * use skb_copy_bits which will properly copy the data whether it is in the - * paged memory fragments or not. We have to copy the IP header as well as the - * message type. + * this watchdog task is scheduled to detect error case where hardware has + * dropped an Rx packet that was timestamped when the ring is full. The + * particular error is rare but leaves the device in a state unable to timestamp + * any future packets. */ -static int ixgbe_ptp_match(struct sk_buff *skb, int rx_filter) +void ixgbe_ptp_rx_hang(struct ixgbe_adapter *adapter) { - struct iphdr iph; - u8 msgtype; - unsigned int type, offset; - - if (rx_filter == HWTSTAMP_FILTER_NONE) - return 0; - - type = sk_run_filter(skb, ptp_filter); - - if (likely(rx_filter == HWTSTAMP_FILTER_PTP_V2_EVENT)) - return type & PTP_CLASS_V2; + struct ixgbe_hw *hw = &adapter->hw; + struct ixgbe_ring *rx_ring; + u32 tsyncrxctl = IXGBE_READ_REG(hw, IXGBE_TSYNCRXCTL); + unsigned long rx_event; + int n; - /* For the remaining cases actually check message type */ - switch (type) { - case PTP_CLASS_V1_IPV4: - skb_copy_bits(skb, OFF_IHL, &iph, sizeof(iph)); - offset = ETH_HLEN + (iph.ihl << 2) + UDP_HLEN + OFF_PTP_CONTROL; - break; - case PTP_CLASS_V1_IPV6: - offset = OFF_PTP6 + OFF_PTP_CONTROL; - break; - default: - /* other cases invalid or handled above */ - return 0; + /* if we don't have a valid timestamp in the registers, just update the + * timeout counter and exit + */ + if (!(tsyncrxctl & IXGBE_TSYNCRXCTL_VALID)) { + adapter->last_rx_ptp_check = jiffies; + return; } - /* Make sure our buffer is long enough */ - if (skb->len < offset) - return 0; + /* determine the most recent watchdog or rx_timestamp event */ + rx_event = adapter->last_rx_ptp_check; + for (n = 0; n < adapter->num_rx_queues; n++) { + rx_ring = adapter->rx_ring[n]; + if (time_after(rx_ring->last_rx_timestamp, rx_event)) + rx_event = rx_ring->last_rx_timestamp; + } - skb_copy_bits(skb, offset, &msgtype, sizeof(msgtype)); + /* only need to read the high RXSTMP register to clear the lock */ + if (time_is_before_jiffies(rx_event + 5*HZ)) { + IXGBE_READ_REG(hw, IXGBE_RXSTMPH); + adapter->last_rx_ptp_check = jiffies; - switch (rx_filter) { - case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: - return (msgtype == IXGBE_RXMTRL_V1_SYNC_MSG); - break; - case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: - return (msgtype == IXGBE_RXMTRL_V1_DELAY_REQ_MSG); - break; - default: - return 0; + e_warn(drv, "clearing RX Timestamp hang"); } } /** * ixgbe_ptp_tx_hwtstamp - utility function which checks for TX time stamp - * @q_vector: structure containing interrupt and ring information - * @skb: particular skb to send timestamp with + * @adapter: the private adapter struct * * if the timestamp is valid, we convert it into the timecounter ns * value, then store that result into the shhwtstamps structure which * is passed up the network stack */ -void ixgbe_ptp_tx_hwtstamp(struct ixgbe_q_vector *q_vector, - struct sk_buff *skb) +static void ixgbe_ptp_tx_hwtstamp(struct ixgbe_adapter *adapter) { - struct ixgbe_adapter *adapter; - struct ixgbe_hw *hw; + struct ixgbe_hw *hw = &adapter->hw; struct skb_shared_hwtstamps shhwtstamps; u64 regval = 0, ns; - u32 tsynctxctl; unsigned long flags; - /* we cannot process timestamps on a ring without a q_vector */ - if (!q_vector || !q_vector->adapter) - return; - - adapter = q_vector->adapter; - hw = &adapter->hw; - - tsynctxctl = IXGBE_READ_REG(hw, IXGBE_TSYNCTXCTL); regval |= (u64)IXGBE_READ_REG(hw, IXGBE_TXSTMPL); regval |= (u64)IXGBE_READ_REG(hw, IXGBE_TXSTMPH) << 32; - /* - * if TX timestamp is not valid, exit after clearing the - * timestamp registers - */ - if (!(tsynctxctl & IXGBE_TSYNCTXCTL_VALID)) - return; - spin_lock_irqsave(&adapter->tmreg_lock, flags); ns = timecounter_cyc2time(&adapter->tc, regval); spin_unlock_irqrestore(&adapter->tmreg_lock, flags); memset(&shhwtstamps, 0, sizeof(shhwtstamps)); shhwtstamps.hwtstamp = ns_to_ktime(ns); - skb_tstamp_tx(skb, &shhwtstamps); + skb_tstamp_tx(adapter->ptp_tx_skb, &shhwtstamps); + + dev_kfree_skb_any(adapter->ptp_tx_skb); + adapter->ptp_tx_skb = NULL; +} + +/** + * ixgbe_ptp_tx_hwtstamp_work + * @work: pointer to the work struct + * + * This work item polls TSYNCTXCTL valid bit to determine when a Tx hardware + * timestamp has been taken for the current skb. It is necesary, because the + * descriptor's "done" bit does not correlate with the timestamp event. + */ +static void ixgbe_ptp_tx_hwtstamp_work(struct work_struct *work) +{ + struct ixgbe_adapter *adapter = container_of(work, struct ixgbe_adapter, + ptp_tx_work); + struct ixgbe_hw *hw = &adapter->hw; + bool timeout = time_is_before_jiffies(adapter->ptp_tx_start + + IXGBE_PTP_TX_TIMEOUT); + u32 tsynctxctl; + + /* we have to have a valid skb */ + if (!adapter->ptp_tx_skb) + return; + + if (timeout) { + dev_kfree_skb_any(adapter->ptp_tx_skb); + adapter->ptp_tx_skb = NULL; + e_warn(drv, "clearing Tx Timestamp hang"); + return; + } + + tsynctxctl = IXGBE_READ_REG(hw, IXGBE_TSYNCTXCTL); + if (tsynctxctl & IXGBE_TSYNCTXCTL_VALID) + ixgbe_ptp_tx_hwtstamp(adapter); + else + /* reschedule to keep checking if it's not available yet */ + schedule_work(&adapter->ptp_tx_work); } /** - * ixgbe_ptp_rx_hwtstamp - utility function which checks for RX time stamp + * __ixgbe_ptp_rx_hwtstamp - utility function which checks for RX time stamp * @q_vector: structure containing interrupt and ring information - * @rx_desc: the rx descriptor * @skb: particular skb to send timestamp with * * if the timestamp is valid, we convert it into the timecounter ns * value, then store that result into the shhwtstamps structure which * is passed up the network stack */ -void ixgbe_ptp_rx_hwtstamp(struct ixgbe_q_vector *q_vector, - union ixgbe_adv_rx_desc *rx_desc, - struct sk_buff *skb) +void __ixgbe_ptp_rx_hwtstamp(struct ixgbe_q_vector *q_vector, + struct sk_buff *skb) { struct ixgbe_adapter *adapter; struct ixgbe_hw *hw; @@ -563,37 +556,17 @@ void ixgbe_ptp_rx_hwtstamp(struct ixgbe_q_vector *q_vector, adapter = q_vector->adapter; hw = &adapter->hw; - if (likely(!ixgbe_ptp_match(skb, adapter->rx_hwtstamp_filter))) - return; - + /* + * Read the tsyncrxctl register afterwards in order to prevent taking an + * I/O hit on every packet. + */ tsyncrxctl = IXGBE_READ_REG(hw, IXGBE_TSYNCRXCTL); - - /* Check if we have a valid timestamp and make sure the skb should - * have been timestamped */ if (!(tsyncrxctl & IXGBE_TSYNCRXCTL_VALID)) return; - /* - * Always read the registers, in order to clear a possible fault - * because of stagnant RX timestamp values for a packet that never - * reached the queue. - */ regval |= (u64)IXGBE_READ_REG(hw, IXGBE_RXSTMPL); regval |= (u64)IXGBE_READ_REG(hw, IXGBE_RXSTMPH) << 32; - /* - * If the timestamp bit is set in the packet's descriptor, we know the - * timestamp belongs to this packet. No other packet can be - * timestamped until the registers for timestamping have been read. - * Therefor only one packet with this bit can be in the queue at a - * time, and the rx timestamp values that were in the registers belong - * to this packet. - * - * If nothing went wrong, then it should have a skb_shared_tx that we - * can turn into a skb_shared_hwtstamps. - */ - if (unlikely(!ixgbe_test_staterr(rx_desc, IXGBE_RXDADV_STAT_TS))) - return; spin_lock_irqsave(&adapter->tmreg_lock, flags); ns = timecounter_cyc2time(&adapter->tc, regval); @@ -660,11 +633,11 @@ int ixgbe_ptp_hwtstamp_ioctl(struct ixgbe_adapter *adapter, break; case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: tsync_rx_ctl |= IXGBE_TSYNCRXCTL_TYPE_L4_V1; - tsync_rx_mtrl = IXGBE_RXMTRL_V1_SYNC_MSG; + tsync_rx_mtrl |= IXGBE_RXMTRL_V1_SYNC_MSG; break; case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: tsync_rx_ctl |= IXGBE_TSYNCRXCTL_TYPE_L4_V1; - tsync_rx_mtrl = IXGBE_RXMTRL_V1_DELAY_REQ_MSG; + tsync_rx_mtrl |= IXGBE_RXMTRL_V1_DELAY_REQ_MSG; break; case HWTSTAMP_FILTER_PTP_V2_EVENT: case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: @@ -698,9 +671,6 @@ int ixgbe_ptp_hwtstamp_ioctl(struct ixgbe_adapter *adapter, return 0; } - /* Store filter value for later use */ - adapter->rx_hwtstamp_filter = config.rx_filter; - /* define ethertype filter for timestamping L2 packets */ if (is_l2) IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_1588), @@ -902,11 +872,8 @@ void ixgbe_ptp_init(struct ixgbe_adapter *adapter) return; } - /* initialize the ptp filter */ - if (ptp_filter_init(ptp_filter, ARRAY_SIZE(ptp_filter))) - e_dev_warn("ptp_filter_init failed\n"); - spin_lock_init(&adapter->tmreg_lock); + INIT_WORK(&adapter->ptp_tx_work, ixgbe_ptp_tx_hwtstamp_work); adapter->ptp_clock = ptp_clock_register(&adapter->ptp_caps, &adapter->pdev->dev); @@ -938,6 +905,12 @@ void ixgbe_ptp_stop(struct ixgbe_adapter *adapter) ixgbe_ptp_setup_sdp(adapter); + cancel_work_sync(&adapter->ptp_tx_work); + if (adapter->ptp_tx_skb) { + dev_kfree_skb_any(adapter->ptp_tx_skb); + adapter->ptp_tx_skb = NULL; + } + if (adapter->ptp_clock) { ptp_clock_unregister(adapter->ptp_clock); adapter->ptp_clock = NULL; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c index 85cddac673e..d44b4d21268 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -44,50 +44,11 @@ #include "ixgbe_sriov.h" #ifdef CONFIG_PCI_IOV -void ixgbe_enable_sriov(struct ixgbe_adapter *adapter, - const struct ixgbe_info *ii) +static int __ixgbe_enable_sriov(struct ixgbe_adapter *adapter) { struct ixgbe_hw *hw = &adapter->hw; int num_vf_macvlans, i; struct vf_macvlans *mv_list; - int pre_existing_vfs = 0; - - pre_existing_vfs = pci_num_vf(adapter->pdev); - if (!pre_existing_vfs && !adapter->num_vfs) - return; - - /* If there are pre-existing VFs then we have to force - * use of that many because they were not deleted the last - * time someone removed the PF driver. That would have - * been because they were allocated to guest VMs and can't - * be removed. Go ahead and just re-enable the old amount. - * If the user wants to change the number of VFs they can - * use ethtool while making sure no VFs are allocated to - * guest VMs... i.e. the right way. - */ - if (pre_existing_vfs) { - adapter->num_vfs = pre_existing_vfs; - dev_warn(&adapter->pdev->dev, "Virtual Functions already " - "enabled for this device - Please reload all " - "VF drivers to avoid spoofed packet errors\n"); - } else { - int err; - /* - * The 82599 supports up to 64 VFs per physical function - * but this implementation limits allocation to 63 so that - * basic networking resources are still available to the - * physical function. If the user requests greater thn - * 63 VFs then it is an error - reset to default of zero. - */ - adapter->num_vfs = min_t(unsigned int, adapter->num_vfs, 63); - - err = pci_enable_sriov(adapter->pdev, adapter->num_vfs); - if (err) { - e_err(probe, "Failed to enable PCI sriov: %d\n", err); - adapter->num_vfs = 0; - return; - } - } adapter->flags |= IXGBE_FLAG_SRIOV_ENABLED; e_info(probe, "SR-IOV enabled with %d VFs\n", adapter->num_vfs); @@ -128,12 +89,6 @@ void ixgbe_enable_sriov(struct ixgbe_adapter *adapter, kcalloc(adapter->num_vfs, sizeof(struct vf_data_storage), GFP_KERNEL); if (adapter->vfinfo) { - /* Now that we're sure SR-IOV is enabled - * and memory allocated set up the mailbox parameters - */ - ixgbe_init_mbx_params_pf(hw); - memcpy(&hw->mbx.ops, ii->mbx_ops, sizeof(hw->mbx.ops)); - /* limit trafffic classes based on VFs enabled */ if ((adapter->hw.mac.type == ixgbe_mac_82599EB) && (adapter->num_vfs < 16)) { @@ -157,10 +112,62 @@ void ixgbe_enable_sriov(struct ixgbe_adapter *adapter, /* enable spoof checking for all VFs */ for (i = 0; i < adapter->num_vfs; i++) adapter->vfinfo[i].spoofchk_enabled = true; + return 0; + } + + return -ENOMEM; +} + +/* Note this function is called when the user wants to enable SR-IOV + * VFs using the now deprecated module parameter + */ +void ixgbe_enable_sriov(struct ixgbe_adapter *adapter) +{ + int pre_existing_vfs = 0; + + pre_existing_vfs = pci_num_vf(adapter->pdev); + if (!pre_existing_vfs && !adapter->num_vfs) return; + + if (!pre_existing_vfs) + dev_warn(&adapter->pdev->dev, + "Enabling SR-IOV VFs using the module parameter is deprecated - please use the pci sysfs interface.\n"); + + /* If there are pre-existing VFs then we have to force + * use of that many - over ride any module parameter value. + * This may result from the user unloading the PF driver + * while VFs were assigned to guest VMs or because the VFs + * have been created via the new PCI SR-IOV sysfs interface. + */ + if (pre_existing_vfs) { + adapter->num_vfs = pre_existing_vfs; + dev_warn(&adapter->pdev->dev, + "Virtual Functions already enabled for this device - Please reload all VF drivers to avoid spoofed packet errors\n"); + } else { + int err; + /* + * The 82599 supports up to 64 VFs per physical function + * but this implementation limits allocation to 63 so that + * basic networking resources are still available to the + * physical function. If the user requests greater thn + * 63 VFs then it is an error - reset to default of zero. + */ + adapter->num_vfs = min_t(unsigned int, adapter->num_vfs, 63); + + err = pci_enable_sriov(adapter->pdev, adapter->num_vfs); + if (err) { + e_err(probe, "Failed to enable PCI sriov: %d\n", err); + adapter->num_vfs = 0; + return; + } } - /* Oh oh */ + if (!__ixgbe_enable_sriov(adapter)) + return; + + /* If we have gotten to this point then there is no memory available + * to manage the VF devices - print message and bail. + */ e_err(probe, "Unable to allocate memory for VF Data Storage - " "SRIOV disabled\n"); ixgbe_disable_sriov(adapter); @@ -200,11 +207,12 @@ static bool ixgbe_vfs_are_assigned(struct ixgbe_adapter *adapter) } #endif /* #ifdef CONFIG_PCI_IOV */ -void ixgbe_disable_sriov(struct ixgbe_adapter *adapter) +int ixgbe_disable_sriov(struct ixgbe_adapter *adapter) { struct ixgbe_hw *hw = &adapter->hw; u32 gpie; u32 vmdctl; + int rss; /* set num VFs to 0 to prevent access to vfinfo */ adapter->num_vfs = 0; @@ -219,7 +227,7 @@ void ixgbe_disable_sriov(struct ixgbe_adapter *adapter) /* if SR-IOV is already disabled then there is nothing to do */ if (!(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)) - return; + return 0; #ifdef CONFIG_PCI_IOV /* @@ -229,7 +237,7 @@ void ixgbe_disable_sriov(struct ixgbe_adapter *adapter) */ if (ixgbe_vfs_are_assigned(adapter)) { e_dev_warn("Unloading driver while VFs are assigned - VFs will not be deallocated\n"); - return; + return -EPERM; } /* disable iov and allow time for transactions to clear */ pci_disable_sriov(adapter->pdev); @@ -252,10 +260,94 @@ void ixgbe_disable_sriov(struct ixgbe_adapter *adapter) adapter->flags &= ~IXGBE_FLAG_VMDQ_ENABLED; adapter->ring_feature[RING_F_VMDQ].offset = 0; + rss = min_t(int, IXGBE_MAX_RSS_INDICES, num_online_cpus()); + adapter->ring_feature[RING_F_RSS].limit = rss; + /* take a breather then clean up driver data */ msleep(100); adapter->flags &= ~IXGBE_FLAG_SRIOV_ENABLED; + return 0; +} + +static int ixgbe_pci_sriov_enable(struct pci_dev *dev, int num_vfs) +{ +#ifdef CONFIG_PCI_IOV + struct ixgbe_adapter *adapter = pci_get_drvdata(dev); + int err = 0; + int i; + int pre_existing_vfs = pci_num_vf(dev); + + if (pre_existing_vfs && pre_existing_vfs != num_vfs) + err = ixgbe_disable_sriov(adapter); + else if (pre_existing_vfs && pre_existing_vfs == num_vfs) + goto out; + + if (err) + goto err_out; + + /* While the SR-IOV capability structure reports total VFs to be + * 64 we limit the actual number that can be allocated to 63 so + * that some transmit/receive resources can be reserved to the + * PF. The PCI bus driver already checks for other values out of + * range. + */ + if (num_vfs > 63) { + err = -EPERM; + goto err_out; + } + + adapter->num_vfs = num_vfs; + + err = __ixgbe_enable_sriov(adapter); + if (err) + goto err_out; + + for (i = 0; i < adapter->num_vfs; i++) + ixgbe_vf_configuration(dev, (i | 0x10000000)); + + err = pci_enable_sriov(dev, num_vfs); + if (err) { + e_dev_warn("Failed to enable PCI sriov: %d\n", err); + goto err_out; + } + ixgbe_sriov_reinit(adapter); + +out: + return num_vfs; + +err_out: + return err; +#endif + return 0; +} + +static int ixgbe_pci_sriov_disable(struct pci_dev *dev) +{ + struct ixgbe_adapter *adapter = pci_get_drvdata(dev); + int err; + u32 current_flags = adapter->flags; + + err = ixgbe_disable_sriov(adapter); + + /* Only reinit if no error and state changed */ + if (!err && current_flags != adapter->flags) { + /* ixgbe_disable_sriov() doesn't clear VMDQ flag */ + adapter->flags &= ~IXGBE_FLAG_VMDQ_ENABLED; +#ifdef CONFIG_PCI_IOV + ixgbe_sriov_reinit(adapter); +#endif + } + + return err; +} + +int ixgbe_pci_sriov_configure(struct pci_dev *dev, int num_vfs) +{ + if (num_vfs == 0) + return ixgbe_pci_sriov_disable(dev); + else + return ixgbe_pci_sriov_enable(dev, num_vfs); } static int ixgbe_set_vf_multicasts(struct ixgbe_adapter *adapter, @@ -447,15 +539,6 @@ static void ixgbe_set_vmolr(struct ixgbe_hw *hw, u32 vf, bool aupe) IXGBE_WRITE_REG(hw, IXGBE_VMOLR(vf), vmolr); } -static void ixgbe_set_vmvir(struct ixgbe_adapter *adapter, - u16 vid, u16 qos, u32 vf) -{ - struct ixgbe_hw *hw = &adapter->hw; - u32 vmvir = vid | (qos << VLAN_PRIO_SHIFT) | IXGBE_VMVIR_VLANA_DEFAULT; - - IXGBE_WRITE_REG(hw, IXGBE_VMVIR(vf), vmvir); -} - static void ixgbe_clear_vmvir(struct ixgbe_adapter *adapter, u32 vf) { struct ixgbe_hw *hw = &adapter->hw; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h index 1be1d30e4e7..4713f9fc7f4 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -41,12 +41,20 @@ int ixgbe_ndo_set_vf_spoofchk(struct net_device *netdev, int vf, bool setting); int ixgbe_ndo_get_vf_config(struct net_device *netdev, int vf, struct ifla_vf_info *ivi); void ixgbe_check_vf_rate_limit(struct ixgbe_adapter *adapter); -void ixgbe_disable_sriov(struct ixgbe_adapter *adapter); +int ixgbe_disable_sriov(struct ixgbe_adapter *adapter); #ifdef CONFIG_PCI_IOV -void ixgbe_enable_sriov(struct ixgbe_adapter *adapter, - const struct ixgbe_info *ii); +void ixgbe_enable_sriov(struct ixgbe_adapter *adapter); #endif +int ixgbe_pci_sriov_configure(struct pci_dev *dev, int num_vfs); +static inline void ixgbe_set_vmvir(struct ixgbe_adapter *adapter, + u16 vid, u16 qos, u32 vf) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 vmvir = vid | (qos << VLAN_PRIO_SHIFT) | IXGBE_VMVIR_VLANA_DEFAULT; + + IXGBE_WRITE_REG(hw, IXGBE_VMVIR(vf), vmvir); +} #endif /* _IXGBE_SRIOV_H_ */ diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c index 16ddf14e8ba..d118def16f3 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h index 9cd8a13711d..6652e96c352 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -2822,7 +2822,7 @@ struct ixgbe_mac_operations { void (*disable_tx_laser)(struct ixgbe_hw *); void (*enable_tx_laser)(struct ixgbe_hw *); void (*flap_tx_laser)(struct ixgbe_hw *); - s32 (*setup_link)(struct ixgbe_hw *, ixgbe_link_speed, bool, bool); + s32 (*setup_link)(struct ixgbe_hw *, ixgbe_link_speed, bool); s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *, bool); s32 (*get_link_capabilities)(struct ixgbe_hw *, ixgbe_link_speed *, bool *); @@ -2869,12 +2869,12 @@ struct ixgbe_phy_operations { s32 (*read_reg)(struct ixgbe_hw *, u32, u32, u16 *); s32 (*write_reg)(struct ixgbe_hw *, u32, u32, u16); s32 (*setup_link)(struct ixgbe_hw *); - s32 (*setup_link_speed)(struct ixgbe_hw *, ixgbe_link_speed, bool, - bool); + s32 (*setup_link_speed)(struct ixgbe_hw *, ixgbe_link_speed, bool); s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *); s32 (*get_firmware_version)(struct ixgbe_hw *, u16 *); s32 (*read_i2c_byte)(struct ixgbe_hw *, u8, u8, u8 *); s32 (*write_i2c_byte)(struct ixgbe_hw *, u8, u8, u8); + s32 (*read_i2c_sff8472)(struct ixgbe_hw *, u8 , u8 *); s32 (*read_i2c_eeprom)(struct ixgbe_hw *, u8 , u8 *); s32 (*write_i2c_eeprom)(struct ixgbe_hw *, u8, u8); s32 (*check_overtemp)(struct ixgbe_hw *); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c index c73b9299339..66c5e946284 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -72,14 +72,13 @@ static s32 ixgbe_get_invariants_X540(struct ixgbe_hw *hw) * ixgbe_setup_mac_link_X540 - Set the auto advertised capabilitires * @hw: pointer to hardware structure * @speed: new link speed - * @autoneg: true if autonegotiation enabled * @autoneg_wait_to_complete: true when waiting for completion is needed **/ static s32 ixgbe_setup_mac_link_X540(struct ixgbe_hw *hw, - ixgbe_link_speed speed, bool autoneg, - bool autoneg_wait_to_complete) + ixgbe_link_speed speed, + bool autoneg_wait_to_complete) { - return hw->phy.ops.setup_link_speed(hw, speed, autoneg, + return hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait_to_complete); } @@ -879,6 +878,7 @@ static struct ixgbe_phy_operations phy_ops_X540 = { .setup_link_speed = &ixgbe_setup_phy_link_speed_generic, .read_i2c_byte = &ixgbe_read_i2c_byte_generic, .write_i2c_byte = &ixgbe_write_i2c_byte_generic, + .read_i2c_sff8472 = &ixgbe_read_i2c_sff8472_generic, .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_generic, .write_i2c_eeprom = &ixgbe_write_i2c_eeprom_generic, .check_overtemp = &ixgbe_tn_check_overtemp, diff --git a/drivers/net/ethernet/intel/ixgbevf/ethtool.c b/drivers/net/ethernet/intel/ixgbevf/ethtool.c index 8f2070439b5..c9d0c12d6f0 100644 --- a/drivers/net/ethernet/intel/ixgbevf/ethtool.c +++ b/drivers/net/ethernet/intel/ixgbevf/ethtool.c @@ -99,6 +99,7 @@ static int ixgbevf_get_settings(struct net_device *netdev, ecmd->transceiver = XCVR_DUMMY1; ecmd->port = -1; + hw->mac.get_link_status = 1; hw->mac.ops.check_link(hw, &link_speed, &link_up, false); if (link_up) { diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c index 257357ae66c..c3db6cd69b6 100644 --- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c +++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c @@ -750,12 +750,37 @@ static void ixgbevf_set_itr(struct ixgbevf_q_vector *q_vector) static irqreturn_t ixgbevf_msix_other(int irq, void *data) { struct ixgbevf_adapter *adapter = data; + struct pci_dev *pdev = adapter->pdev; struct ixgbe_hw *hw = &adapter->hw; + u32 msg; + bool got_ack = false; hw->mac.get_link_status = 1; + if (!hw->mbx.ops.check_for_ack(hw)) + got_ack = true; - if (!test_bit(__IXGBEVF_DOWN, &adapter->state)) - mod_timer(&adapter->watchdog_timer, jiffies); + if (!hw->mbx.ops.check_for_msg(hw)) { + hw->mbx.ops.read(hw, &msg, 1); + + if ((msg & IXGBE_MBVFICR_VFREQ_MASK) == IXGBE_PF_CONTROL_MSG) { + mod_timer(&adapter->watchdog_timer, + round_jiffies(jiffies + 1)); + adapter->link_up = false; + } + + if (msg & IXGBE_VT_MSGTYPE_NACK) + dev_info(&pdev->dev, + "Last Request of type %2.2x to PF Nacked\n", + msg & 0xFF); + hw->mbx.v2p_mailbox |= IXGBE_VFMAILBOX_PFSTS; + } + + /* checking for the ack clears the PFACK bit. Place + * it back in the v2p_mailbox cache so that anyone + * polling for an ack will not miss it + */ + if (got_ack) + hw->mbx.v2p_mailbox |= IXGBE_VFMAILBOX_PFACK; IXGBE_WRITE_REG(hw, IXGBE_VTEIMS, adapter->eims_other); @@ -2095,6 +2120,9 @@ void ixgbevf_update_stats(struct ixgbevf_adapter *adapter) struct ixgbe_hw *hw = &adapter->hw; int i; + if (!adapter->link_up) + return; + UPDATE_VF_COUNTER_32bit(IXGBE_VFGPRC, adapter->stats.last_vfgprc, adapter->stats.vfgprc); UPDATE_VF_COUNTER_32bit(IXGBE_VFGPTC, adapter->stats.last_vfgptc, @@ -2217,9 +2245,23 @@ static void ixgbevf_watchdog_task(struct work_struct *work) if (link_up) { if (!netif_carrier_ok(netdev)) { - hw_dbg(&adapter->hw, "NIC Link is Up, %u Gbps\n", - (link_speed == IXGBE_LINK_SPEED_10GB_FULL) ? - 10 : 1); + char *link_speed_string; + switch (link_speed) { + case IXGBE_LINK_SPEED_10GB_FULL: + link_speed_string = "10 Gbps"; + break; + case IXGBE_LINK_SPEED_1GB_FULL: + link_speed_string = "1 Gbps"; + break; + case IXGBE_LINK_SPEED_100_FULL: + link_speed_string = "100 Mbps"; + break; + default: + link_speed_string = "unknown speed"; + break; + } + dev_info(&adapter->pdev->dev, + "NIC Link is Up, %s\n", link_speed_string); netif_carrier_on(netdev); netif_tx_wake_all_queues(netdev); } @@ -2227,7 +2269,7 @@ static void ixgbevf_watchdog_task(struct work_struct *work) adapter->link_up = false; adapter->link_speed = 0; if (netif_carrier_ok(netdev)) { - hw_dbg(&adapter->hw, "NIC Link is Down\n"); + dev_info(&adapter->pdev->dev, "NIC Link is Down\n"); netif_carrier_off(netdev); netif_tx_stop_all_queues(netdev); } @@ -3328,8 +3370,6 @@ static int ixgbevf_probe(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_sw_init; /* The HW MAC address was set and/or determined in sw_init */ - memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len); - if (!is_valid_ether_addr(netdev->dev_addr)) { pr_err("invalid MAC address\n"); err = -EIO; |