diff options
Diffstat (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_common.c')
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_common.c | 3510 |
1 files changed, 3510 insertions, 0 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c new file mode 100644 index 00000000000..fc1375f26fe --- /dev/null +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c @@ -0,0 +1,3510 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2011 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/netdevice.h> + +#include "ixgbe.h" +#include "ixgbe_common.h" +#include "ixgbe_phy.h" + +static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw); +static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw); +static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw); +static s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw); +static void ixgbe_standby_eeprom(struct ixgbe_hw *hw); +static void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data, + u16 count); +static u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count); +static void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec); +static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec); +static void ixgbe_release_eeprom(struct ixgbe_hw *hw); + +static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr); +static s32 ixgbe_fc_autoneg_fiber(struct ixgbe_hw *hw); +static s32 ixgbe_fc_autoneg_backplane(struct ixgbe_hw *hw); +static s32 ixgbe_fc_autoneg_copper(struct ixgbe_hw *hw); +static s32 ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw); +static s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg, + u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm); +static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num); +static s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg); +static s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data); +static s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data); +static s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw, + u16 offset); + +/** + * ixgbe_start_hw_generic - Prepare hardware for Tx/Rx + * @hw: pointer to hardware structure + * + * Starts the hardware by filling the bus info structure and media type, clears + * all on chip counters, initializes receive address registers, multicast + * table, VLAN filter table, calls routine to set up link and flow control + * settings, and leaves transmit and receive units disabled and uninitialized + **/ +s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw) +{ + u32 ctrl_ext; + + /* Set the media type */ + hw->phy.media_type = hw->mac.ops.get_media_type(hw); + + /* Identify the PHY */ + hw->phy.ops.identify(hw); + + /* Clear the VLAN filter table */ + hw->mac.ops.clear_vfta(hw); + + /* Clear statistics registers */ + hw->mac.ops.clear_hw_cntrs(hw); + + /* Set No Snoop Disable */ + ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT); + ctrl_ext |= IXGBE_CTRL_EXT_NS_DIS; + IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext); + IXGBE_WRITE_FLUSH(hw); + + /* Setup flow control */ + ixgbe_setup_fc(hw, 0); + + /* Clear adapter stopped flag */ + hw->adapter_stopped = false; + + return 0; +} + +/** + * ixgbe_start_hw_gen2 - Init sequence for common device family + * @hw: pointer to hw structure + * + * Performs the init sequence common to the second generation + * of 10 GbE devices. + * Devices in the second generation: + * 82599 + * X540 + **/ +s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw) +{ + u32 i; + u32 regval; + + /* Clear the rate limiters */ + for (i = 0; i < hw->mac.max_tx_queues; i++) { + IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, i); + IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRC, 0); + } + IXGBE_WRITE_FLUSH(hw); + + /* Disable relaxed ordering */ + for (i = 0; i < hw->mac.max_tx_queues; i++) { + regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(i)); + regval &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN; + IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(i), regval); + } + + for (i = 0; i < hw->mac.max_rx_queues; i++) { + regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i)); + regval &= ~(IXGBE_DCA_RXCTRL_DESC_WRO_EN | + IXGBE_DCA_RXCTRL_DESC_HSRO_EN); + IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval); + } + + return 0; +} + +/** + * ixgbe_init_hw_generic - Generic hardware initialization + * @hw: pointer to hardware structure + * + * Initialize the hardware by resetting the hardware, filling the bus info + * structure and media type, clears all on chip counters, initializes receive + * address registers, multicast table, VLAN filter table, calls routine to set + * up link and flow control settings, and leaves transmit and receive units + * disabled and uninitialized + **/ +s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw) +{ + s32 status; + + /* Reset the hardware */ + status = hw->mac.ops.reset_hw(hw); + + if (status == 0) { + /* Start the HW */ + status = hw->mac.ops.start_hw(hw); + } + + return status; +} + +/** + * ixgbe_clear_hw_cntrs_generic - Generic clear hardware counters + * @hw: pointer to hardware structure + * + * Clears all hardware statistics counters by reading them from the hardware + * Statistics counters are clear on read. + **/ +s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw) +{ + u16 i = 0; + + IXGBE_READ_REG(hw, IXGBE_CRCERRS); + IXGBE_READ_REG(hw, IXGBE_ILLERRC); + IXGBE_READ_REG(hw, IXGBE_ERRBC); + IXGBE_READ_REG(hw, IXGBE_MSPDC); + for (i = 0; i < 8; i++) + IXGBE_READ_REG(hw, IXGBE_MPC(i)); + + IXGBE_READ_REG(hw, IXGBE_MLFC); + IXGBE_READ_REG(hw, IXGBE_MRFC); + IXGBE_READ_REG(hw, IXGBE_RLEC); + IXGBE_READ_REG(hw, IXGBE_LXONTXC); + IXGBE_READ_REG(hw, IXGBE_LXOFFTXC); + if (hw->mac.type >= ixgbe_mac_82599EB) { + IXGBE_READ_REG(hw, IXGBE_LXONRXCNT); + IXGBE_READ_REG(hw, IXGBE_LXOFFRXCNT); + } else { + IXGBE_READ_REG(hw, IXGBE_LXONRXC); + IXGBE_READ_REG(hw, IXGBE_LXOFFRXC); + } + + for (i = 0; i < 8; i++) { + IXGBE_READ_REG(hw, IXGBE_PXONTXC(i)); + IXGBE_READ_REG(hw, IXGBE_PXOFFTXC(i)); + if (hw->mac.type >= ixgbe_mac_82599EB) { + IXGBE_READ_REG(hw, IXGBE_PXONRXCNT(i)); + IXGBE_READ_REG(hw, IXGBE_PXOFFRXCNT(i)); + } else { + IXGBE_READ_REG(hw, IXGBE_PXONRXC(i)); + IXGBE_READ_REG(hw, IXGBE_PXOFFRXC(i)); + } + } + if (hw->mac.type >= ixgbe_mac_82599EB) + for (i = 0; i < 8; i++) + IXGBE_READ_REG(hw, IXGBE_PXON2OFFCNT(i)); + IXGBE_READ_REG(hw, IXGBE_PRC64); + IXGBE_READ_REG(hw, IXGBE_PRC127); + IXGBE_READ_REG(hw, IXGBE_PRC255); + IXGBE_READ_REG(hw, IXGBE_PRC511); + IXGBE_READ_REG(hw, IXGBE_PRC1023); + IXGBE_READ_REG(hw, IXGBE_PRC1522); + IXGBE_READ_REG(hw, IXGBE_GPRC); + IXGBE_READ_REG(hw, IXGBE_BPRC); + IXGBE_READ_REG(hw, IXGBE_MPRC); + IXGBE_READ_REG(hw, IXGBE_GPTC); + IXGBE_READ_REG(hw, IXGBE_GORCL); + IXGBE_READ_REG(hw, IXGBE_GORCH); + IXGBE_READ_REG(hw, IXGBE_GOTCL); + IXGBE_READ_REG(hw, IXGBE_GOTCH); + for (i = 0; i < 8; i++) + IXGBE_READ_REG(hw, IXGBE_RNBC(i)); + IXGBE_READ_REG(hw, IXGBE_RUC); + IXGBE_READ_REG(hw, IXGBE_RFC); + IXGBE_READ_REG(hw, IXGBE_ROC); + IXGBE_READ_REG(hw, IXGBE_RJC); + IXGBE_READ_REG(hw, IXGBE_MNGPRC); + IXGBE_READ_REG(hw, IXGBE_MNGPDC); + IXGBE_READ_REG(hw, IXGBE_MNGPTC); + IXGBE_READ_REG(hw, IXGBE_TORL); + IXGBE_READ_REG(hw, IXGBE_TORH); + IXGBE_READ_REG(hw, IXGBE_TPR); + IXGBE_READ_REG(hw, IXGBE_TPT); + IXGBE_READ_REG(hw, IXGBE_PTC64); + IXGBE_READ_REG(hw, IXGBE_PTC127); + IXGBE_READ_REG(hw, IXGBE_PTC255); + IXGBE_READ_REG(hw, IXGBE_PTC511); + IXGBE_READ_REG(hw, IXGBE_PTC1023); + IXGBE_READ_REG(hw, IXGBE_PTC1522); + IXGBE_READ_REG(hw, IXGBE_MPTC); + IXGBE_READ_REG(hw, IXGBE_BPTC); + for (i = 0; i < 16; i++) { + IXGBE_READ_REG(hw, IXGBE_QPRC(i)); + IXGBE_READ_REG(hw, IXGBE_QPTC(i)); + if (hw->mac.type >= ixgbe_mac_82599EB) { + IXGBE_READ_REG(hw, IXGBE_QBRC_L(i)); + IXGBE_READ_REG(hw, IXGBE_QBRC_H(i)); + IXGBE_READ_REG(hw, IXGBE_QBTC_L(i)); + IXGBE_READ_REG(hw, IXGBE_QBTC_H(i)); + IXGBE_READ_REG(hw, IXGBE_QPRDC(i)); + } else { + IXGBE_READ_REG(hw, IXGBE_QBRC(i)); + IXGBE_READ_REG(hw, IXGBE_QBTC(i)); + } + } + + if (hw->mac.type == ixgbe_mac_X540) { + if (hw->phy.id == 0) + hw->phy.ops.identify(hw); + hw->phy.ops.read_reg(hw, 0x3, IXGBE_PCRC8ECL, &i); + hw->phy.ops.read_reg(hw, 0x3, IXGBE_PCRC8ECH, &i); + hw->phy.ops.read_reg(hw, 0x3, IXGBE_LDPCECL, &i); + hw->phy.ops.read_reg(hw, 0x3, IXGBE_LDPCECH, &i); + } + + return 0; +} + +/** + * ixgbe_read_pba_string_generic - Reads part number string from EEPROM + * @hw: pointer to hardware structure + * @pba_num: stores the part number string from the EEPROM + * @pba_num_size: part number string buffer length + * + * Reads the part number string from the EEPROM. + **/ +s32 ixgbe_read_pba_string_generic(struct ixgbe_hw *hw, u8 *pba_num, + u32 pba_num_size) +{ + s32 ret_val; + u16 data; + u16 pba_ptr; + u16 offset; + u16 length; + + if (pba_num == NULL) { + hw_dbg(hw, "PBA string buffer was null\n"); + return IXGBE_ERR_INVALID_ARGUMENT; + } + + ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM0_PTR, &data); + if (ret_val) { + hw_dbg(hw, "NVM Read Error\n"); + return ret_val; + } + + ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM1_PTR, &pba_ptr); + if (ret_val) { + hw_dbg(hw, "NVM Read Error\n"); + return ret_val; + } + + /* + * if data is not ptr guard the PBA must be in legacy format which + * means pba_ptr is actually our second data word for the PBA number + * and we can decode it into an ascii string + */ + if (data != IXGBE_PBANUM_PTR_GUARD) { + hw_dbg(hw, "NVM PBA number is not stored as string\n"); + + /* we will need 11 characters to store the PBA */ + if (pba_num_size < 11) { + hw_dbg(hw, "PBA string buffer too small\n"); + return IXGBE_ERR_NO_SPACE; + } + + /* extract hex string from data and pba_ptr */ + pba_num[0] = (data >> 12) & 0xF; + pba_num[1] = (data >> 8) & 0xF; + pba_num[2] = (data >> 4) & 0xF; + pba_num[3] = data & 0xF; + pba_num[4] = (pba_ptr >> 12) & 0xF; + pba_num[5] = (pba_ptr >> 8) & 0xF; + pba_num[6] = '-'; + pba_num[7] = 0; + pba_num[8] = (pba_ptr >> 4) & 0xF; + pba_num[9] = pba_ptr & 0xF; + + /* put a null character on the end of our string */ + pba_num[10] = '\0'; + + /* switch all the data but the '-' to hex char */ + for (offset = 0; offset < 10; offset++) { + if (pba_num[offset] < 0xA) + pba_num[offset] += '0'; + else if (pba_num[offset] < 0x10) + pba_num[offset] += 'A' - 0xA; + } + + return 0; + } + + ret_val = hw->eeprom.ops.read(hw, pba_ptr, &length); + if (ret_val) { + hw_dbg(hw, "NVM Read Error\n"); + return ret_val; + } + + if (length == 0xFFFF || length == 0) { + hw_dbg(hw, "NVM PBA number section invalid length\n"); + return IXGBE_ERR_PBA_SECTION; + } + + /* check if pba_num buffer is big enough */ + if (pba_num_size < (((u32)length * 2) - 1)) { + hw_dbg(hw, "PBA string buffer too small\n"); + return IXGBE_ERR_NO_SPACE; + } + + /* trim pba length from start of string */ + pba_ptr++; + length--; + + for (offset = 0; offset < length; offset++) { + ret_val = hw->eeprom.ops.read(hw, pba_ptr + offset, &data); + if (ret_val) { + hw_dbg(hw, "NVM Read Error\n"); + return ret_val; + } + pba_num[offset * 2] = (u8)(data >> 8); + pba_num[(offset * 2) + 1] = (u8)(data & 0xFF); + } + pba_num[offset * 2] = '\0'; + + return 0; +} + +/** + * ixgbe_get_mac_addr_generic - Generic get MAC address + * @hw: pointer to hardware structure + * @mac_addr: Adapter MAC address + * + * Reads the adapter's MAC address from first Receive Address Register (RAR0) + * A reset of the adapter must be performed prior to calling this function + * in order for the MAC address to have been loaded from the EEPROM into RAR0 + **/ +s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr) +{ + u32 rar_high; + u32 rar_low; + u16 i; + + rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(0)); + rar_low = IXGBE_READ_REG(hw, IXGBE_RAL(0)); + + for (i = 0; i < 4; i++) + mac_addr[i] = (u8)(rar_low >> (i*8)); + + for (i = 0; i < 2; i++) + mac_addr[i+4] = (u8)(rar_high >> (i*8)); + + return 0; +} + +/** + * ixgbe_get_bus_info_generic - Generic set PCI bus info + * @hw: pointer to hardware structure + * + * Sets the PCI bus info (speed, width, type) within the ixgbe_hw structure + **/ +s32 ixgbe_get_bus_info_generic(struct ixgbe_hw *hw) +{ + struct ixgbe_adapter *adapter = hw->back; + struct ixgbe_mac_info *mac = &hw->mac; + u16 link_status; + + hw->bus.type = ixgbe_bus_type_pci_express; + + /* Get the negotiated link width and speed from PCI config space */ + pci_read_config_word(adapter->pdev, IXGBE_PCI_LINK_STATUS, + &link_status); + + switch (link_status & IXGBE_PCI_LINK_WIDTH) { + case IXGBE_PCI_LINK_WIDTH_1: + hw->bus.width = ixgbe_bus_width_pcie_x1; + break; + case IXGBE_PCI_LINK_WIDTH_2: + hw->bus.width = ixgbe_bus_width_pcie_x2; + break; + case IXGBE_PCI_LINK_WIDTH_4: + hw->bus.width = ixgbe_bus_width_pcie_x4; + break; + case IXGBE_PCI_LINK_WIDTH_8: + hw->bus.width = ixgbe_bus_width_pcie_x8; + break; + default: + hw->bus.width = ixgbe_bus_width_unknown; + break; + } + + switch (link_status & IXGBE_PCI_LINK_SPEED) { + case IXGBE_PCI_LINK_SPEED_2500: + hw->bus.speed = ixgbe_bus_speed_2500; + break; + case IXGBE_PCI_LINK_SPEED_5000: + hw->bus.speed = ixgbe_bus_speed_5000; + break; + default: + hw->bus.speed = ixgbe_bus_speed_unknown; + break; + } + + mac->ops.set_lan_id(hw); + + return 0; +} + +/** + * ixgbe_set_lan_id_multi_port_pcie - Set LAN id for PCIe multiple port devices + * @hw: pointer to the HW structure + * + * Determines the LAN function id by reading memory-mapped registers + * and swaps the port value if requested. + **/ +void ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw *hw) +{ + struct ixgbe_bus_info *bus = &hw->bus; + u32 reg; + + reg = IXGBE_READ_REG(hw, IXGBE_STATUS); + bus->func = (reg & IXGBE_STATUS_LAN_ID) >> IXGBE_STATUS_LAN_ID_SHIFT; + bus->lan_id = bus->func; + + /* check for a port swap */ + reg = IXGBE_READ_REG(hw, IXGBE_FACTPS); + if (reg & IXGBE_FACTPS_LFS) + bus->func ^= 0x1; +} + +/** + * ixgbe_stop_adapter_generic - Generic stop Tx/Rx units + * @hw: pointer to hardware structure + * + * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts, + * disables transmit and receive units. The adapter_stopped flag is used by + * the shared code and drivers to determine if the adapter is in a stopped + * state and should not touch the hardware. + **/ +s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw) +{ + u32 number_of_queues; + u32 reg_val; + u16 i; + + /* + * Set the adapter_stopped flag so other driver functions stop touching + * the hardware + */ + hw->adapter_stopped = true; + + /* Disable the receive unit */ + reg_val = IXGBE_READ_REG(hw, IXGBE_RXCTRL); + reg_val &= ~(IXGBE_RXCTRL_RXEN); + IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, reg_val); + IXGBE_WRITE_FLUSH(hw); + usleep_range(2000, 4000); + + /* Clear interrupt mask to stop from interrupts being generated */ + IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_IRQ_CLEAR_MASK); + + /* Clear any pending interrupts */ + IXGBE_READ_REG(hw, IXGBE_EICR); + + /* Disable the transmit unit. Each queue must be disabled. */ + number_of_queues = hw->mac.max_tx_queues; + for (i = 0; i < number_of_queues; i++) { + reg_val = IXGBE_READ_REG(hw, IXGBE_TXDCTL(i)); + if (reg_val & IXGBE_TXDCTL_ENABLE) { + reg_val &= ~IXGBE_TXDCTL_ENABLE; + IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(i), reg_val); + } + } + + /* + * Prevent the PCI-E bus from from hanging by disabling PCI-E master + * access and verify no pending requests + */ + ixgbe_disable_pcie_master(hw); + + return 0; +} + +/** + * ixgbe_led_on_generic - Turns on the software controllable LEDs. + * @hw: pointer to hardware structure + * @index: led number to turn on + **/ +s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index) +{ + u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); + + /* To turn on the LED, set mode to ON. */ + led_reg &= ~IXGBE_LED_MODE_MASK(index); + led_reg |= IXGBE_LED_ON << IXGBE_LED_MODE_SHIFT(index); + IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); + IXGBE_WRITE_FLUSH(hw); + + return 0; +} + +/** + * ixgbe_led_off_generic - Turns off the software controllable LEDs. + * @hw: pointer to hardware structure + * @index: led number to turn off + **/ +s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index) +{ + u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); + + /* To turn off the LED, set mode to OFF. */ + led_reg &= ~IXGBE_LED_MODE_MASK(index); + led_reg |= IXGBE_LED_OFF << IXGBE_LED_MODE_SHIFT(index); + IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); + IXGBE_WRITE_FLUSH(hw); + + return 0; +} + +/** + * ixgbe_init_eeprom_params_generic - Initialize EEPROM params + * @hw: pointer to hardware structure + * + * Initializes the EEPROM parameters ixgbe_eeprom_info within the + * ixgbe_hw struct in order to set up EEPROM access. + **/ +s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw) +{ + struct ixgbe_eeprom_info *eeprom = &hw->eeprom; + u32 eec; + u16 eeprom_size; + + if (eeprom->type == ixgbe_eeprom_uninitialized) { + eeprom->type = ixgbe_eeprom_none; + /* Set default semaphore delay to 10ms which is a well + * tested value */ + eeprom->semaphore_delay = 10; + /* Clear EEPROM page size, it will be initialized as needed */ + eeprom->word_page_size = 0; + + /* + * Check for EEPROM present first. + * If not present leave as none + */ + eec = IXGBE_READ_REG(hw, IXGBE_EEC); + if (eec & IXGBE_EEC_PRES) { + eeprom->type = ixgbe_eeprom_spi; + + /* + * SPI EEPROM is assumed here. This code would need to + * change if a future EEPROM is not SPI. + */ + eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >> + IXGBE_EEC_SIZE_SHIFT); + eeprom->word_size = 1 << (eeprom_size + + IXGBE_EEPROM_WORD_SIZE_SHIFT); + } + + if (eec & IXGBE_EEC_ADDR_SIZE) + eeprom->address_bits = 16; + else + eeprom->address_bits = 8; + hw_dbg(hw, "Eeprom params: type = %d, size = %d, address bits: " + "%d\n", eeprom->type, eeprom->word_size, + eeprom->address_bits); + } + + return 0; +} + +/** + * ixgbe_write_eeprom_buffer_bit_bang_generic - Write EEPROM using bit-bang + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to write + * @words: number of words + * @data: 16 bit word(s) to write to EEPROM + * + * Reads 16 bit word(s) from EEPROM through bit-bang method + **/ +s32 ixgbe_write_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data) +{ + s32 status = 0; + u16 i, count; + + hw->eeprom.ops.init_params(hw); + + if (words == 0) { + status = IXGBE_ERR_INVALID_ARGUMENT; + goto out; + } + + if (offset + words > hw->eeprom.word_size) { + status = IXGBE_ERR_EEPROM; + goto out; + } + + /* + * The EEPROM page size cannot be queried from the chip. We do lazy + * initialization. It is worth to do that when we write large buffer. + */ + if ((hw->eeprom.word_page_size == 0) && + (words > IXGBE_EEPROM_PAGE_SIZE_MAX)) + ixgbe_detect_eeprom_page_size_generic(hw, offset); + + /* + * We cannot hold synchronization semaphores for too long + * to avoid other entity starvation. However it is more efficient + * to read in bursts than synchronizing access for each word. + */ + for (i = 0; i < words; i += IXGBE_EEPROM_RD_BUFFER_MAX_COUNT) { + count = (words - i) / IXGBE_EEPROM_RD_BUFFER_MAX_COUNT > 0 ? + IXGBE_EEPROM_RD_BUFFER_MAX_COUNT : (words - i); + status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset + i, + count, &data[i]); + + if (status != 0) + break; + } + +out: + return status; +} + +/** + * ixgbe_write_eeprom_buffer_bit_bang - Writes 16 bit word(s) to EEPROM + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be written to + * @words: number of word(s) + * @data: 16 bit word(s) to be written to the EEPROM + * + * If ixgbe_eeprom_update_checksum is not called after this function, the + * EEPROM will most likely contain an invalid checksum. + **/ +static s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data) +{ + s32 status; + u16 word; + u16 page_size; + u16 i; + u8 write_opcode = IXGBE_EEPROM_WRITE_OPCODE_SPI; + + /* Prepare the EEPROM for writing */ + status = ixgbe_acquire_eeprom(hw); + + if (status == 0) { + if (ixgbe_ready_eeprom(hw) != 0) { + ixgbe_release_eeprom(hw); + status = IXGBE_ERR_EEPROM; + } + } + + if (status == 0) { + for (i = 0; i < words; i++) { + ixgbe_standby_eeprom(hw); + + /* Send the WRITE ENABLE command (8 bit opcode ) */ + ixgbe_shift_out_eeprom_bits(hw, + IXGBE_EEPROM_WREN_OPCODE_SPI, + IXGBE_EEPROM_OPCODE_BITS); + + ixgbe_standby_eeprom(hw); + + /* + * Some SPI eeproms use the 8th address bit embedded + * in the opcode + */ + if ((hw->eeprom.address_bits == 8) && + ((offset + i) >= 128)) + write_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI; + + /* Send the Write command (8-bit opcode + addr) */ + ixgbe_shift_out_eeprom_bits(hw, write_opcode, + IXGBE_EEPROM_OPCODE_BITS); + ixgbe_shift_out_eeprom_bits(hw, (u16)((offset + i) * 2), + hw->eeprom.address_bits); + + page_size = hw->eeprom.word_page_size; + + /* Send the data in burst via SPI*/ + do { + word = data[i]; + word = (word >> 8) | (word << 8); + ixgbe_shift_out_eeprom_bits(hw, word, 16); + + if (page_size == 0) + break; + + /* do not wrap around page */ + if (((offset + i) & (page_size - 1)) == + (page_size - 1)) + break; + } while (++i < words); + + ixgbe_standby_eeprom(hw); + usleep_range(10000, 20000); + } + /* Done with writing - release the EEPROM */ + ixgbe_release_eeprom(hw); + } + + return status; +} + +/** + * ixgbe_write_eeprom_generic - Writes 16 bit value to EEPROM + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be written to + * @data: 16 bit word to be written to the EEPROM + * + * If ixgbe_eeprom_update_checksum is not called after this function, the + * EEPROM will most likely contain an invalid checksum. + **/ +s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data) +{ + s32 status; + + hw->eeprom.ops.init_params(hw); + + if (offset >= hw->eeprom.word_size) { + status = IXGBE_ERR_EEPROM; + goto out; + } + + status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset, 1, &data); + +out: + return status; +} + +/** + * ixgbe_read_eeprom_buffer_bit_bang_generic - Read EEPROM using bit-bang + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be read + * @words: number of word(s) + * @data: read 16 bit words(s) from EEPROM + * + * Reads 16 bit word(s) from EEPROM through bit-bang method + **/ +s32 ixgbe_read_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data) +{ + s32 status = 0; + u16 i, count; + + hw->eeprom.ops.init_params(hw); + + if (words == 0) { + status = IXGBE_ERR_INVALID_ARGUMENT; + goto out; + } + + if (offset + words > hw->eeprom.word_size) { + status = IXGBE_ERR_EEPROM; + goto out; + } + + /* + * We cannot hold synchronization semaphores for too long + * to avoid other entity starvation. However it is more efficient + * to read in bursts than synchronizing access for each word. + */ + for (i = 0; i < words; i += IXGBE_EEPROM_RD_BUFFER_MAX_COUNT) { + count = (words - i) / IXGBE_EEPROM_RD_BUFFER_MAX_COUNT > 0 ? + IXGBE_EEPROM_RD_BUFFER_MAX_COUNT : (words - i); + + status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset + i, + count, &data[i]); + + if (status != 0) + break; + } + +out: + return status; +} + +/** + * ixgbe_read_eeprom_buffer_bit_bang - Read EEPROM using bit-bang + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be read + * @words: number of word(s) + * @data: read 16 bit word(s) from EEPROM + * + * Reads 16 bit word(s) from EEPROM through bit-bang method + **/ +static s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data) +{ + s32 status; + u16 word_in; + u8 read_opcode = IXGBE_EEPROM_READ_OPCODE_SPI; + u16 i; + + /* Prepare the EEPROM for reading */ + status = ixgbe_acquire_eeprom(hw); + + if (status == 0) { + if (ixgbe_ready_eeprom(hw) != 0) { + ixgbe_release_eeprom(hw); + status = IXGBE_ERR_EEPROM; + } + } + + if (status == 0) { + for (i = 0; i < words; i++) { + ixgbe_standby_eeprom(hw); + /* + * Some SPI eeproms use the 8th address bit embedded + * in the opcode + */ + if ((hw->eeprom.address_bits == 8) && + ((offset + i) >= 128)) + read_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI; + + /* Send the READ command (opcode + addr) */ + ixgbe_shift_out_eeprom_bits(hw, read_opcode, + IXGBE_EEPROM_OPCODE_BITS); + ixgbe_shift_out_eeprom_bits(hw, (u16)((offset + i) * 2), + hw->eeprom.address_bits); + + /* Read the data. */ + word_in = ixgbe_shift_in_eeprom_bits(hw, 16); + data[i] = (word_in >> 8) | (word_in << 8); + } + + /* End this read operation */ + ixgbe_release_eeprom(hw); + } + + return status; +} + +/** + * ixgbe_read_eeprom_bit_bang_generic - Read EEPROM word using bit-bang + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be read + * @data: read 16 bit value from EEPROM + * + * Reads 16 bit value from EEPROM through bit-bang method + **/ +s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, + u16 *data) +{ + s32 status; + + hw->eeprom.ops.init_params(hw); + + if (offset >= hw->eeprom.word_size) { + status = IXGBE_ERR_EEPROM; + goto out; + } + + status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset, 1, data); + +out: + return status; +} + +/** + * ixgbe_read_eerd_buffer_generic - Read EEPROM word(s) using EERD + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to read + * @words: number of word(s) + * @data: 16 bit word(s) from the EEPROM + * + * Reads a 16 bit word(s) from the EEPROM using the EERD register. + **/ +s32 ixgbe_read_eerd_buffer_generic(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data) +{ + u32 eerd; + s32 status = 0; + u32 i; + + hw->eeprom.ops.init_params(hw); + + if (words == 0) { + status = IXGBE_ERR_INVALID_ARGUMENT; + goto out; + } + + if (offset >= hw->eeprom.word_size) { + status = IXGBE_ERR_EEPROM; + goto out; + } + + for (i = 0; i < words; i++) { + eerd = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) + + IXGBE_EEPROM_RW_REG_START; + + IXGBE_WRITE_REG(hw, IXGBE_EERD, eerd); + status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_READ); + + if (status == 0) { + data[i] = (IXGBE_READ_REG(hw, IXGBE_EERD) >> + IXGBE_EEPROM_RW_REG_DATA); + } else { + hw_dbg(hw, "Eeprom read timed out\n"); + goto out; + } + } +out: + return status; +} + +/** + * ixgbe_detect_eeprom_page_size_generic - Detect EEPROM page size + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be used as a scratch pad + * + * Discover EEPROM page size by writing marching data at given offset. + * This function is called only when we are writing a new large buffer + * at given offset so the data would be overwritten anyway. + **/ +static s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw, + u16 offset) +{ + u16 data[IXGBE_EEPROM_PAGE_SIZE_MAX]; + s32 status = 0; + u16 i; + + for (i = 0; i < IXGBE_EEPROM_PAGE_SIZE_MAX; i++) + data[i] = i; + + hw->eeprom.word_page_size = IXGBE_EEPROM_PAGE_SIZE_MAX; + status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset, + IXGBE_EEPROM_PAGE_SIZE_MAX, data); + hw->eeprom.word_page_size = 0; + if (status != 0) + goto out; + + status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset, 1, data); + if (status != 0) + goto out; + + /* + * When writing in burst more than the actual page size + * EEPROM address wraps around current page. + */ + hw->eeprom.word_page_size = IXGBE_EEPROM_PAGE_SIZE_MAX - data[0]; + + hw_dbg(hw, "Detected EEPROM page size = %d words.", + hw->eeprom.word_page_size); +out: + return status; +} + +/** + * ixgbe_read_eerd_generic - Read EEPROM word using EERD + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to read + * @data: word read from the EEPROM + * + * Reads a 16 bit word from the EEPROM using the EERD register. + **/ +s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data) +{ + return ixgbe_read_eerd_buffer_generic(hw, offset, 1, data); +} + +/** + * ixgbe_write_eewr_buffer_generic - Write EEPROM word(s) using EEWR + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to write + * @words: number of words + * @data: word(s) write to the EEPROM + * + * Write a 16 bit word(s) to the EEPROM using the EEWR register. + **/ +s32 ixgbe_write_eewr_buffer_generic(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data) +{ + u32 eewr; + s32 status = 0; + u16 i; + + hw->eeprom.ops.init_params(hw); + + if (words == 0) { + status = IXGBE_ERR_INVALID_ARGUMENT; + goto out; + } + + if (offset >= hw->eeprom.word_size) { + status = IXGBE_ERR_EEPROM; + goto out; + } + + for (i = 0; i < words; i++) { + eewr = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) | + (data[i] << IXGBE_EEPROM_RW_REG_DATA) | + IXGBE_EEPROM_RW_REG_START; + + status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE); + if (status != 0) { + hw_dbg(hw, "Eeprom write EEWR timed out\n"); + goto out; + } + + IXGBE_WRITE_REG(hw, IXGBE_EEWR, eewr); + + status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE); + if (status != 0) { + hw_dbg(hw, "Eeprom write EEWR timed out\n"); + goto out; + } + } + +out: + return status; +} + +/** + * ixgbe_write_eewr_generic - Write EEPROM word using EEWR + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to write + * @data: word write to the EEPROM + * + * Write a 16 bit word to the EEPROM using the EEWR register. + **/ +s32 ixgbe_write_eewr_generic(struct ixgbe_hw *hw, u16 offset, u16 data) +{ + return ixgbe_write_eewr_buffer_generic(hw, offset, 1, &data); +} + +/** + * ixgbe_poll_eerd_eewr_done - Poll EERD read or EEWR write status + * @hw: pointer to hardware structure + * @ee_reg: EEPROM flag for polling + * + * Polls the status bit (bit 1) of the EERD or EEWR to determine when the + * read or write is done respectively. + **/ +static s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg) +{ + u32 i; + u32 reg; + s32 status = IXGBE_ERR_EEPROM; + + for (i = 0; i < IXGBE_EERD_EEWR_ATTEMPTS; i++) { + if (ee_reg == IXGBE_NVM_POLL_READ) + reg = IXGBE_READ_REG(hw, IXGBE_EERD); + else + reg = IXGBE_READ_REG(hw, IXGBE_EEWR); + + if (reg & IXGBE_EEPROM_RW_REG_DONE) { + status = 0; + break; + } + udelay(5); + } + return status; +} + +/** + * ixgbe_acquire_eeprom - Acquire EEPROM using bit-bang + * @hw: pointer to hardware structure + * + * Prepares EEPROM for access using bit-bang method. This function should + * be called before issuing a command to the EEPROM. + **/ +static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw) +{ + s32 status = 0; + u32 eec; + u32 i; + + if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) != 0) + status = IXGBE_ERR_SWFW_SYNC; + + if (status == 0) { + eec = IXGBE_READ_REG(hw, IXGBE_EEC); + + /* Request EEPROM Access */ + eec |= IXGBE_EEC_REQ; + IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); + + for (i = 0; i < IXGBE_EEPROM_GRANT_ATTEMPTS; i++) { + eec = IXGBE_READ_REG(hw, IXGBE_EEC); + if (eec & IXGBE_EEC_GNT) + break; + udelay(5); + } + + /* Release if grant not acquired */ + if (!(eec & IXGBE_EEC_GNT)) { + eec &= ~IXGBE_EEC_REQ; + IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); + hw_dbg(hw, "Could not acquire EEPROM grant\n"); + + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); + status = IXGBE_ERR_EEPROM; + } + + /* Setup EEPROM for Read/Write */ + if (status == 0) { + /* Clear CS and SK */ + eec &= ~(IXGBE_EEC_CS | IXGBE_EEC_SK); + IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); + IXGBE_WRITE_FLUSH(hw); + udelay(1); + } + } + return status; |