diff options
Diffstat (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c')
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c | 2263 |
1 files changed, 2263 insertions, 0 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c new file mode 100644 index 00000000000..34f30ec79c2 --- /dev/null +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c @@ -0,0 +1,2263 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2011 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/sched.h> + +#include "ixgbe.h" +#include "ixgbe_phy.h" +#include "ixgbe_mbx.h" + +#define IXGBE_82599_MAX_TX_QUEUES 128 +#define IXGBE_82599_MAX_RX_QUEUES 128 +#define IXGBE_82599_RAR_ENTRIES 128 +#define IXGBE_82599_MC_TBL_SIZE 128 +#define IXGBE_82599_VFT_TBL_SIZE 128 +#define IXGBE_82599_RX_PB_SIZE 512 + +static void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw); +static void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw); +static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw); +static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete); +static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete); +static s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw, + bool autoneg_wait_to_complete); +static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete); +static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete); +static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw); +static bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw); + +static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + + /* enable the laser control functions for SFP+ fiber */ + if (mac->ops.get_media_type(hw) == ixgbe_media_type_fiber) { + mac->ops.disable_tx_laser = + &ixgbe_disable_tx_laser_multispeed_fiber; + mac->ops.enable_tx_laser = + &ixgbe_enable_tx_laser_multispeed_fiber; + mac->ops.flap_tx_laser = &ixgbe_flap_tx_laser_multispeed_fiber; + } else { + mac->ops.disable_tx_laser = NULL; + mac->ops.enable_tx_laser = NULL; + mac->ops.flap_tx_laser = NULL; + } + + if (hw->phy.multispeed_fiber) { + /* Set up dual speed SFP+ support */ + mac->ops.setup_link = &ixgbe_setup_mac_link_multispeed_fiber; + } else { + if ((mac->ops.get_media_type(hw) == + ixgbe_media_type_backplane) && + (hw->phy.smart_speed == ixgbe_smart_speed_auto || + hw->phy.smart_speed == ixgbe_smart_speed_on) && + !ixgbe_verify_lesm_fw_enabled_82599(hw)) + mac->ops.setup_link = &ixgbe_setup_mac_link_smartspeed; + else + mac->ops.setup_link = &ixgbe_setup_mac_link_82599; + } +} + +static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw) +{ + s32 ret_val = 0; + u32 reg_anlp1 = 0; + u32 i = 0; + u16 list_offset, data_offset, data_value; + + if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) { + ixgbe_init_mac_link_ops_82599(hw); + + hw->phy.ops.reset = NULL; + + ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset, + &data_offset); + if (ret_val != 0) + goto setup_sfp_out; + + /* PHY config will finish before releasing the semaphore */ + ret_val = hw->mac.ops.acquire_swfw_sync(hw, + IXGBE_GSSR_MAC_CSR_SM); + if (ret_val != 0) { + ret_val = IXGBE_ERR_SWFW_SYNC; + goto setup_sfp_out; + } + + hw->eeprom.ops.read(hw, ++data_offset, &data_value); + while (data_value != 0xffff) { + IXGBE_WRITE_REG(hw, IXGBE_CORECTL, data_value); + IXGBE_WRITE_FLUSH(hw); + hw->eeprom.ops.read(hw, ++data_offset, &data_value); + } + + /* Release the semaphore */ + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM); + /* + * Delay obtaining semaphore again to allow FW access, + * semaphore_delay is in ms usleep_range needs us. + */ + usleep_range(hw->eeprom.semaphore_delay * 1000, + hw->eeprom.semaphore_delay * 2000); + + /* Now restart DSP by setting Restart_AN and clearing LMS */ + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, ((IXGBE_READ_REG(hw, + IXGBE_AUTOC) & ~IXGBE_AUTOC_LMS_MASK) | + IXGBE_AUTOC_AN_RESTART)); + + /* Wait for AN to leave state 0 */ + for (i = 0; i < 10; i++) { + usleep_range(4000, 8000); + reg_anlp1 = IXGBE_READ_REG(hw, IXGBE_ANLP1); + if (reg_anlp1 & IXGBE_ANLP1_AN_STATE_MASK) + break; + } + if (!(reg_anlp1 & IXGBE_ANLP1_AN_STATE_MASK)) { + hw_dbg(hw, "sfp module setup not complete\n"); + ret_val = IXGBE_ERR_SFP_SETUP_NOT_COMPLETE; + goto setup_sfp_out; + } + + /* Restart DSP by setting Restart_AN and return to SFI mode */ + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (IXGBE_READ_REG(hw, + IXGBE_AUTOC) | IXGBE_AUTOC_LMS_10G_SERIAL | + IXGBE_AUTOC_AN_RESTART)); + } + +setup_sfp_out: + return ret_val; +} + +static s32 ixgbe_get_invariants_82599(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + + ixgbe_init_mac_link_ops_82599(hw); + + mac->mcft_size = IXGBE_82599_MC_TBL_SIZE; + mac->vft_size = IXGBE_82599_VFT_TBL_SIZE; + mac->num_rar_entries = IXGBE_82599_RAR_ENTRIES; + mac->max_rx_queues = IXGBE_82599_MAX_RX_QUEUES; + mac->max_tx_queues = IXGBE_82599_MAX_TX_QUEUES; + mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw); + + return 0; +} + +/** + * ixgbe_init_phy_ops_82599 - PHY/SFP specific init + * @hw: pointer to hardware structure + * + * Initialize any function pointers that were not able to be + * set during get_invariants because the PHY/SFP type was + * not known. Perform the SFP init if necessary. + * + **/ +static s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + struct ixgbe_phy_info *phy = &hw->phy; + s32 ret_val = 0; + + /* Identify the PHY or SFP module */ + ret_val = phy->ops.identify(hw); + + /* Setup function pointers based on detected SFP module and speeds */ + ixgbe_init_mac_link_ops_82599(hw); + + /* If copper media, overwrite with copper function pointers */ + if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) { + mac->ops.setup_link = &ixgbe_setup_copper_link_82599; + mac->ops.get_link_capabilities = + &ixgbe_get_copper_link_capabilities_generic; + } + + /* Set necessary function pointers based on phy type */ + switch (hw->phy.type) { + case ixgbe_phy_tn: + phy->ops.check_link = &ixgbe_check_phy_link_tnx; + phy->ops.setup_link = &ixgbe_setup_phy_link_tnx; + phy->ops.get_firmware_version = + &ixgbe_get_phy_firmware_version_tnx; + break; + case ixgbe_phy_aq: + phy->ops.get_firmware_version = + &ixgbe_get_phy_firmware_version_generic; + break; + default: + break; + } + + return ret_val; +} + +/** + * ixgbe_get_link_capabilities_82599 - Determines link capabilities + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @negotiation: true when autoneg or autotry is enabled + * + * Determines the link capabilities by reading the AUTOC register. + **/ +static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *negotiation) +{ + s32 status = 0; + u32 autoc = 0; + + /* Determine 1G link capabilities off of SFP+ type */ + if (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1) { + *speed = IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = true; + goto out; + } + + /* + * Determine link capabilities based on the stored value of AUTOC, + * which represents EEPROM defaults. If AUTOC value has not been + * stored, use the current register value. + */ + if (hw->mac.orig_link_settings_stored) + autoc = hw->mac.orig_autoc; + else + autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + + switch (autoc & IXGBE_AUTOC_LMS_MASK) { + case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: + *speed = IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = false; + break; + + case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: + *speed = IXGBE_LINK_SPEED_10GB_FULL; + *negotiation = false; + break; + + case IXGBE_AUTOC_LMS_1G_AN: + *speed = IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = true; + break; + + case IXGBE_AUTOC_LMS_10G_SERIAL: + *speed = IXGBE_LINK_SPEED_10GB_FULL; + *negotiation = false; + break; + + case IXGBE_AUTOC_LMS_KX4_KX_KR: + case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN: + *speed = IXGBE_LINK_SPEED_UNKNOWN; + if (autoc & IXGBE_AUTOC_KR_SUPP) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (autoc & IXGBE_AUTOC_KX4_SUPP) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (autoc & IXGBE_AUTOC_KX_SUPP) + *speed |= IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = true; + break; + + case IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII: + *speed = IXGBE_LINK_SPEED_100_FULL; + if (autoc & IXGBE_AUTOC_KR_SUPP) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (autoc & IXGBE_AUTOC_KX4_SUPP) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (autoc & IXGBE_AUTOC_KX_SUPP) + *speed |= IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = true; + break; + + case IXGBE_AUTOC_LMS_SGMII_1G_100M: + *speed = IXGBE_LINK_SPEED_1GB_FULL | IXGBE_LINK_SPEED_100_FULL; + *negotiation = false; + break; + + default: + status = IXGBE_ERR_LINK_SETUP; + goto out; + break; + } + + if (hw->phy.multispeed_fiber) { + *speed |= IXGBE_LINK_SPEED_10GB_FULL | + IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = true; + } + +out: + return status; +} + +/** + * ixgbe_get_media_type_82599 - Get media type + * @hw: pointer to hardware structure + * + * Returns the media type (fiber, copper, backplane) + **/ +static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw) +{ + enum ixgbe_media_type media_type; + + /* Detect if there is a copper PHY attached. */ + switch (hw->phy.type) { + case ixgbe_phy_cu_unknown: + case ixgbe_phy_tn: + case ixgbe_phy_aq: + media_type = ixgbe_media_type_copper; + goto out; + default: + break; + } + + switch (hw->device_id) { + case IXGBE_DEV_ID_82599_KX4: + case IXGBE_DEV_ID_82599_KX4_MEZZ: + case IXGBE_DEV_ID_82599_COMBO_BACKPLANE: + case IXGBE_DEV_ID_82599_KR: + case IXGBE_DEV_ID_82599_BACKPLANE_FCOE: + case IXGBE_DEV_ID_82599_XAUI_LOM: + /* Default device ID is mezzanine card KX/KX4 */ + media_type = ixgbe_media_type_backplane; + break; + case IXGBE_DEV_ID_82599_SFP: + case IXGBE_DEV_ID_82599_SFP_FCOE: + case IXGBE_DEV_ID_82599_SFP_EM: + case IXGBE_DEV_ID_82599_SFP_SF2: + media_type = ixgbe_media_type_fiber; + break; + case IXGBE_DEV_ID_82599_CX4: + media_type = ixgbe_media_type_cx4; + break; + case IXGBE_DEV_ID_82599_T3_LOM: + media_type = ixgbe_media_type_copper; + break; + case IXGBE_DEV_ID_82599_LS: + media_type = ixgbe_media_type_fiber_lco; + break; + default: + media_type = ixgbe_media_type_unknown; + break; + } +out: + return media_type; +} + +/** + * ixgbe_start_mac_link_82599 - Setup MAC link settings + * @hw: pointer to hardware structure + * @autoneg_wait_to_complete: true when waiting for completion is needed + * + * Configures link settings based on values in the ixgbe_hw struct. + * Restarts the link. Performs autonegotiation if needed. + **/ +static s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw, + bool autoneg_wait_to_complete) +{ + u32 autoc_reg; + u32 links_reg; + u32 i; + s32 status = 0; + + /* Restart link */ + autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); + autoc_reg |= IXGBE_AUTOC_AN_RESTART; + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); + + /* Only poll for autoneg to complete if specified to do so */ + if (autoneg_wait_to_complete) { + if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) == + IXGBE_AUTOC_LMS_KX4_KX_KR || + (autoc_reg & IXGBE_AUTOC_LMS_MASK) == + IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN || + (autoc_reg & IXGBE_AUTOC_LMS_MASK) == + IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { + links_reg = 0; /* Just in case Autoneg time = 0 */ + for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) { + links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); + if (links_reg & IXGBE_LINKS_KX_AN_COMP) + break; + msleep(100); + } + if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) { + status = IXGBE_ERR_AUTONEG_NOT_COMPLETE; + hw_dbg(hw, "Autoneg did not complete.\n"); + } + } + } + + /* Add delay to filter out noises during initial link setup */ + msleep(50); + + return status; +} + +/** + * ixgbe_disable_tx_laser_multispeed_fiber - Disable Tx laser + * @hw: pointer to hardware structure + * + * The base drivers may require better control over SFP+ module + * PHY states. This includes selectively shutting down the Tx + * laser on the PHY, effectively halting physical link. + **/ +static void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) +{ + u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); + + /* Disable tx laser; allow 100us to go dark per spec */ + esdp_reg |= IXGBE_ESDP_SDP3; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + IXGBE_WRITE_FLUSH(hw); + udelay(100); +} + +/** + * ixgbe_enable_tx_laser_multispeed_fiber - Enable Tx laser + * @hw: pointer to hardware structure + * + * The base drivers may require better control over SFP+ module + * PHY states. This includes selectively turning on the Tx + * laser on the PHY, effectively starting physical link. + **/ +static void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) +{ + u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); + + /* Enable tx laser; allow 100ms to light up */ + esdp_reg &= ~IXGBE_ESDP_SDP3; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + IXGBE_WRITE_FLUSH(hw); + msleep(100); +} + +/** + * ixgbe_flap_tx_laser_multispeed_fiber - Flap Tx laser + * @hw: pointer to hardware structure + * + * When the driver changes the link speeds that it can support, + * it sets autotry_restart to true to indicate that we need to + * initiate a new autotry session with the link partner. To do + * so, we set the speed then disable and re-enable the tx laser, to + * alert the link partner that it also needs to restart autotry on its + * end. This is consistent with true clause 37 autoneg, which also + * involves a loss of signal. + **/ +static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) +{ + if (hw->mac.autotry_restart) { + ixgbe_disable_tx_laser_multispeed_fiber(hw); + ixgbe_enable_tx_laser_multispeed_fiber(hw); + hw->mac.autotry_restart = false; + } +} + +/** + * ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if autonegotiation enabled + * @autoneg_wait_to_complete: true when waiting for completion is needed + * + * Set the link speed in the AUTOC register and restarts link. + **/ +static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete) +{ + s32 status = 0; + ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN; + ixgbe_link_speed highest_link_speed = IXGBE_LINK_SPEED_UNKNOWN; + u32 speedcnt = 0; + u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); + u32 i = 0; + bool link_up = false; + bool negotiation; + + /* Mask off requested but non-supported speeds */ + status = hw->mac.ops.get_link_capabilities(hw, &link_speed, + &negotiation); + if (status != 0) + return status; + + speed &= link_speed; + + /* + * Try each speed one by one, highest priority first. We do this in + * software because 10gb fiber doesn't support speed autonegotiation. + */ + if (speed & IXGBE_LINK_SPEED_10GB_FULL) { + speedcnt++; + highest_link_speed = IXGBE_LINK_SPEED_10GB_FULL; + + /* If we already have link at this speed, just jump out */ + status = hw->mac.ops.check_link(hw, &link_speed, &link_up, + false); + if (status != 0) + return status; + + if ((link_speed == IXGBE_LINK_SPEED_10GB_FULL) && link_up) + goto out; + + /* Set the module link speed */ + esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5); + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + IXGBE_WRITE_FLUSH(hw); + + /* Allow module to change analog characteristics (1G->10G) */ + msleep(40); + + status = ixgbe_setup_mac_link_82599(hw, + IXGBE_LINK_SPEED_10GB_FULL, + autoneg, + autoneg_wait_to_complete); + if (status != 0) + return status; + + /* Flap the tx laser if it has not already been done */ + hw->mac.ops.flap_tx_laser(hw); + + /* + * Wait for the controller to acquire link. Per IEEE 802.3ap, + * Section 73.10.2, we may have to wait up to 500ms if KR is + * attempted. 82599 uses the same timing for 10g SFI. + */ + for (i = 0; i < 5; i++) { + /* Wait for the link partner to also set speed */ + msleep(100); + + /* If we have link, just jump out */ + status = hw->mac.ops.check_link(hw, &link_speed, + &link_up, false); + if (status != 0) + return status; + + if (link_up) + goto out; + } + } + + if (speed & IXGBE_LINK_SPEED_1GB_FULL) { + speedcnt++; + if (highest_link_speed == IXGBE_LINK_SPEED_UNKNOWN) + highest_link_speed = IXGBE_LINK_SPEED_1GB_FULL; + + /* If we already have link at this speed, just jump out */ + status = hw->mac.ops.check_link(hw, &link_speed, &link_up, + false); + if (status != 0) + return status; + + if ((link_speed == IXGBE_LINK_SPEED_1GB_FULL) && link_up) + goto out; + + /* Set the module link speed */ + esdp_reg &= ~IXGBE_ESDP_SDP5; + esdp_reg |= IXGBE_ESDP_SDP5_DIR; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + IXGBE_WRITE_FLUSH(hw); + + /* Allow module to change analog characteristics (10G->1G) */ + msleep(40); + + status = ixgbe_setup_mac_link_82599(hw, + IXGBE_LINK_SPEED_1GB_FULL, + autoneg, + autoneg_wait_to_complete); + if (status != 0) + return status; + + /* Flap the tx laser if it has not already been done */ + hw->mac.ops.flap_tx_laser(hw); + + /* Wait for the link partner to also set speed */ + msleep(100); + + /* If we have link, just jump out */ + status = hw->mac.ops.check_link(hw, &link_speed, &link_up, + false); + if (status != 0) + return status; + + if (link_up) + goto out; + } + + /* + * We didn't get link. Configure back to the highest speed we tried, + * (if there was more than one). We call ourselves back with just the + * single highest speed that the user requested. + */ + if (speedcnt > 1) + status = ixgbe_setup_mac_link_multispeed_fiber(hw, + highest_link_speed, + autoneg, + autoneg_wait_to_complete); + +out: + /* Set autoneg_advertised value based on input link speed */ + hw->phy.autoneg_advertised = 0; + + if (speed & IXGBE_LINK_SPEED_10GB_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL; + + if (speed & IXGBE_LINK_SPEED_1GB_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL; + + return status; +} + +/** + * ixgbe_setup_mac_link_smartspeed - Set MAC link speed using SmartSpeed + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if autonegotiation enabled + * @autoneg_wait_to_complete: true when waiting for completion is needed + * + * Implements the Intel SmartSpeed algorithm. + **/ +static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, + ixgbe_link_speed speed, bool autoneg, + bool autoneg_wait_to_complete) +{ + s32 status = 0; + ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN; + s32 i, j; + bool link_up = false; + u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); + + /* Set autoneg_advertised value based on input link speed */ + hw->phy.autoneg_advertised = 0; + + if (speed & IXGBE_LINK_SPEED_10GB_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL; + + if (speed & IXGBE_LINK_SPEED_1GB_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL; + + if (speed & IXGBE_LINK_SPEED_100_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_100_FULL; + + /* + * Implement Intel SmartSpeed algorithm. SmartSpeed will reduce the + * autoneg advertisement if link is unable to be established at the + * highest negotiated rate. This can sometimes happen due to integrity + * issues with the physical media connection. + */ + + /* First, try to get link with full advertisement */ + hw->phy.smart_speed_active = false; + for (j = 0; j < IXGBE_SMARTSPEED_MAX_RETRIES; j++) { + status = ixgbe_setup_mac_link_82599(hw, speed, autoneg, + autoneg_wait_to_complete); + if (status != 0) + goto out; + + /* + * Wait for the controller to acquire link. Per IEEE 802.3ap, + * Section 73.10.2, we may have to wait up to 500ms if KR is + * attempted, or 200ms if KX/KX4/BX/BX4 is attempted, per + * Table 9 in the AN MAS. + */ + for (i = 0; i < 5; i++) { + mdelay(100); + + /* If we have link, just jump out */ + status = hw->mac.ops.check_link(hw, &link_speed, + &link_up, false); + if (status != 0) + goto out; + + if (link_up) + goto out; + } + } + + /* + * We didn't get link. If we advertised KR plus one of KX4/KX + * (or BX4/BX), then disable KR and try again. + */ + if (((autoc_reg & IXGBE_AUTOC_KR_SUPP) == 0) || + ((autoc_reg & IXGBE_AUTOC_KX4_KX_SUPP_MASK) == 0)) + goto out; + + /* Turn SmartSpeed on to disable KR support */ + hw->phy.smart_speed_active = true; + status = ixgbe_setup_mac_link_82599(hw, speed, autoneg, + autoneg_wait_to_complete); + if (status != 0) + goto out; + + /* + * Wait for the controller to acquire link. 600ms will allow for + * the AN link_fail_inhibit_timer as well for multiple cycles of + * parallel detect, both 10g and 1g. This allows for the maximum + * connect attempts as defined in the AN MAS table 73-7. + */ + for (i = 0; i < 6; i++) { + mdelay(100); + + /* If we have link, just jump out */ + status = hw->mac.ops.check_link(hw, &link_speed, + &link_up, false); + if (status != 0) + goto out; + + if (link_up) + goto out; + } + + /* We didn't get link. Turn SmartSpeed back off. */ + hw->phy.smart_speed_active = false; + status = ixgbe_setup_mac_link_82599(hw, speed, autoneg, + autoneg_wait_to_complete); + +out: + if (link_up && (link_speed == IXGBE_LINK_SPEED_1GB_FULL)) + hw_dbg(hw, "Smartspeed has downgraded the link speed from " + "the maximum advertised\n"); + return status; +} + +/** + * ixgbe_setup_mac_link_82599 - Set MAC link speed + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if autonegotiation enabled + * @autoneg_wait_to_complete: true when waiting for completion is needed + * + * Set the link speed in the AUTOC register and restarts link. + **/ +static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, + ixgbe_link_speed speed, bool autoneg, + bool autoneg_wait_to_complete) +{ + s32 status = 0; + u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); + u32 start_autoc = autoc; + u32 orig_autoc = 0; + u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK; + u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK; + u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK; + u32 links_reg; + u32 i; + ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN; + + /* Check to see if speed passed in is supported. */ + hw->mac.ops.get_link_capabilities(hw, &link_capabilities, &autoneg); + if (status != 0) + goto out; + + speed &= link_capabilities; + + if (speed == IXGBE_LINK_SPEED_UNKNOWN) { + status = IXGBE_ERR_LINK_SETUP; + goto out; + } + + /* Use stored value (EEPROM defaults) of AUTOC to find KR/KX4 support*/ + if (hw->mac.orig_link_settings_stored) + orig_autoc = hw->mac.orig_autoc; + else + orig_autoc = autoc; + + if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR || + link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN || + link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { + /* Set KX4/KX/KR support according to speed requested */ + autoc &= ~(IXGBE_AUTOC_KX4_KX_SUPP_MASK | IXGBE_AUTOC_KR_SUPP); + if (speed & IXGBE_LINK_SPEED_10GB_FULL) + if (orig_autoc & IXGBE_AUTOC_KX4_SUPP) + autoc |= IXGBE_AUTOC_KX4_SUPP; + if ((orig_autoc & IXGBE_AUTOC_KR_SUPP) && + (hw->phy.smart_speed_active == false)) + autoc |= IXGBE_AUTOC_KR_SUPP; + if (speed & IXGBE_LINK_SPEED_1GB_FULL) + autoc |= IXGBE_AUTOC_KX_SUPP; + } else if ((pma_pmd_1g == IXGBE_AUTOC_1G_SFI) && + (link_mode == IXGBE_AUTOC_LMS_1G_LINK_NO_AN || + link_mode == IXGBE_AUTOC_LMS_1G_AN)) { + /* Switch from 1G SFI to 10G SFI if requested */ + if ((speed == IXGBE_LINK_SPEED_10GB_FULL) && + (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI)) { + autoc &= ~IXGBE_AUTOC_LMS_MASK; + autoc |= IXGBE_AUTOC_LMS_10G_SERIAL; + } + } else if ((pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI) && + (link_mode == IXGBE_AUTOC_LMS_10G_SERIAL)) { + /* Switch from 10G SFI to 1G SFI if requested */ + if ((speed == IXGBE_LINK_SPEED_1GB_FULL) && + (pma_pmd_1g == IXGBE_AUTOC_1G_SFI)) { + autoc &= ~IXGBE_AUTOC_LMS_MASK; + if (autoneg) + autoc |= IXGBE_AUTOC_LMS_1G_AN; + else + autoc |= IXGBE_AUTOC_LMS_1G_LINK_NO_AN; + } + } + + if (autoc != start_autoc) { + /* Restart link */ + autoc |= IXGBE_AUTOC_AN_RESTART; + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc); + + /* Only poll for autoneg to complete if specified to do so */ + if (autoneg_wait_to_complete) { + if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR || + link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN || + link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { + links_reg = 0; /*Just in case Autoneg time=0*/ + for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) { + links_reg = + IXGBE_READ_REG(hw, IXGBE_LINKS); + if (links_reg & IXGBE_LINKS_KX_AN_COMP) + break; + msleep(100); + } + if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) { + status = + IXGBE_ERR_AUTONEG_NOT_COMPLETE; + hw_dbg(hw, "Autoneg did not " + "complete.\n"); + } + } + } + + /* Add delay to filter out noises during initial link setup */ + msleep(50); + } + +out: + return status; +} + +/** + * ixgbe_setup_copper_link_82599 - Set the PHY autoneg advertised field + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if autonegotiation enabled + * @autoneg_wait_to_complete: true if waiting is needed to complete + * + * Restarts link on PHY and MAC based on settings passed in. + **/ +static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete) +{ + s32 status; + + /* Setup the PHY according to input speed */ + status = hw->phy.ops.setup_link_speed(hw, speed, autoneg, + autoneg_wait_to_complete); + /* Set up MAC */ + ixgbe_start_mac_link_82599(hw, autoneg_wait_to_complete); + + return status; +} + +/** + * ixgbe_reset_hw_82599 - Perform hardware reset + * @hw: pointer to hardware structure + * + * Resets the hardware by resetting the transmit and receive units, masks + * and clears all interrupts, perform a PHY reset, and perform a link (MAC) + * reset. + **/ +static s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw) +{ + s32 status = 0; + u32 ctrl; + u32 i; + u32 autoc; + u32 autoc2; + + /* Call adapter stop to disable tx/rx and clear interrupts */ + hw->mac.ops.stop_adapter(hw); + + /* PHY ops must be identified and initialized prior to reset */ + + /* Identify PHY and related function pointers */ + status = hw->phy.ops.init(hw); + + if (status == IXGBE_ERR_SFP_NOT_SUPPORTED) + goto reset_hw_out; + + /* Setup SFP module if there is one present. */ + if (hw->phy.sfp_setup_needed) { + status = hw->mac.ops.setup_sfp(hw); + hw->phy.sfp_setup_needed = false; + } + + if (status == IXGBE_ERR_SFP_NOT_SUPPORTED) + goto reset_hw_out; + + /* Reset PHY */ + if (hw->phy.reset_disable == false && hw->phy.ops.reset != NULL) + hw->phy.ops.reset(hw); + + /* + * Prevent the PCI-E bus from from hanging by disabling PCI-E master + * access and verify no pending requests before reset + */ + ixgbe_disable_pcie_master(hw); + +mac_reset_top: + /* + * Issue global reset to the MAC. This needs to be a SW reset. + * If link reset is used, it might reset the MAC when mng is using it + */ + ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); + IXGBE_WRITE_REG(hw, IXGBE_CTRL, (ctrl | IXGBE_CTRL_RST)); + IXGBE_WRITE_FLUSH(hw); + + /* Poll for reset bit to self-clear indicating reset is complete */ + for (i = 0; i < 10; i++) { + udelay(1); + ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); + if (!(ctrl & IXGBE_CTRL_RST)) + break; + } + if (ctrl & IXGBE_CTRL_RST) { + status = IXGBE_ERR_RESET_FAILED; + hw_dbg(hw, "Reset polling failed to complete.\n"); + } + + /* + * Double resets are required for recovery from certain error + * conditions. Between resets, it is necessary to stall to allow time + * for any pending HW events to complete. We use 1usec since that is + * what is needed for ixgbe_disable_pcie_master(). The second reset + * then clears out any effects of those events. + */ + if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) { + hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; + udelay(1); + goto mac_reset_top; + } + + msleep(50); + + /* + * Store the original AUTOC/AUTOC2 values if they have not been + * stored off yet. Otherwise restore the stored original + * values since the reset operation sets back to defaults. + */ + autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); + if (hw->mac.orig_link_settings_stored == false) { + hw->mac.orig_autoc = autoc; + hw->mac.orig_autoc2 = autoc2; + hw->mac.orig_link_settings_stored = true; + } else { + if (autoc != hw->mac.orig_autoc) + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (hw->mac.orig_autoc | + IXGBE_AUTOC_AN_RESTART)); + + if ((autoc2 & IXGBE_AUTOC2_UPPER_MASK) != + (hw->mac.orig_autoc2 & IXGBE_AUTOC2_UPPER_MASK)) { + autoc2 &= ~IXGBE_AUTOC2_UPPER_MASK; + autoc2 |= (hw->mac.orig_autoc2 & + IXGBE_AUTOC2_UPPER_MASK); + IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2); + } + } + + /* Store the permanent mac address */ + hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr); + + /* + * Store MAC address from RAR0, clear receive address registers, and + * clear the multicast table. Also reset num_rar_entries to 128, + * since we modify this value when programming the SAN MAC address. + */ + hw->mac.num_rar_entries = 128; + hw->mac.ops.init_rx_addrs(hw); + + /* Store the permanent SAN mac address */ + hw->mac.ops.get_san_mac_addr(hw, hw->mac.san_addr); + + /* Add the SAN MAC address to the RAR only if it's a valid address */ + if (ixgbe_validate_mac_addr(hw->mac.san_addr) == 0) { + hw->mac.ops.set_rar(hw, hw->mac.num_rar_entries - 1, + hw->mac.san_addr, 0, IXGBE_RAH_AV); + + /* Reserve the last RAR for the SAN MAC address */ + hw->mac.num_rar_entries--; + } + + /* Store the alternative WWNN/WWPN prefix */ + hw->mac.ops.get_wwn_prefix(hw, &hw->mac.wwnn_prefix, + &hw->mac.wwpn_prefix); + +reset_hw_out: + return status; +} + +/** + * ixgbe_reinit_fdir_tables_82599 - Reinitialize Flow Director tables. + * @hw: pointer to hardware structure + **/ +s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw) +{ + int i; + u32 fdirctrl = IXGBE_READ_REG(hw, IXGBE_FDIRCTRL); + fdirctrl &= ~IXGBE_FDIRCTRL_INIT_DONE; + + /* + * Before starting reinitialization process, + * FDIRCMD.CMD must be zero. + */ + for (i = 0; i < IXGBE_FDIRCMD_CMD_POLL; i++) { + if (!(IXGBE_READ_REG(hw, IXGBE_FDIRCMD) & + IXGBE_FDIRCMD_CMD_MASK)) + break; + udelay(10); + } + if (i >= IXGBE_FDIRCMD_CMD_POLL) { + hw_dbg(hw, "Flow Director previous command isn't complete, " + "aborting table re-initialization.\n"); + return IXGBE_ERR_FDIR_REINIT_FAILED; + } + + IXGBE_WRITE_REG(hw, IXGBE_FDIRFREE, 0); + IXGBE_WRITE_FLUSH(hw); + /* + * 82599 adapters flow director init flow cannot be restarted, + * Workaround 82599 silicon errata by performing the following steps + * before re-writing the FDIRCTRL control register with the same value. + * - write 1 to bit 8 of FDIRCMD register & + * - write 0 to bit 8 of FDIRCMD register + */ + IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, + (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) | + IXGBE_FDIRCMD_CLEARHT)); + IXGBE_WRITE_FLUSH(hw); + IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, + (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) & + ~IXGBE_FDIRCMD_CLEARHT)); + IXGBE_WRITE_FLUSH(hw); + /* + * Clear FDIR Hash register to clear any leftover hashes + * waiting to be programmed. + */ + IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, 0x00); + IXGBE_WRITE_FLUSH(hw); + + IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl); + IXGBE_WRITE_FLUSH(hw); + + /* Poll init-done after we write FDIRCTR |