diff options
Diffstat (limited to 'drivers/net/ethernet/intel/i40evf/i40e_virtchnl.h')
| -rw-r--r-- | drivers/net/ethernet/intel/i40evf/i40e_virtchnl.h | 364 |
1 files changed, 364 insertions, 0 deletions
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_virtchnl.h b/drivers/net/ethernet/intel/i40evf/i40e_virtchnl.h new file mode 100644 index 00000000000..ccf45d04b7e --- /dev/null +++ b/drivers/net/ethernet/intel/i40evf/i40e_virtchnl.h @@ -0,0 +1,364 @@ +/******************************************************************************* + * + * Intel Ethernet Controller XL710 Family Linux Virtual Function Driver + * Copyright(c) 2013 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + ******************************************************************************/ + +#ifndef _I40E_VIRTCHNL_H_ +#define _I40E_VIRTCHNL_H_ + +#include "i40e_type.h" + +/* Description: + * This header file describes the VF-PF communication protocol used + * by the various i40e drivers. + * + * Admin queue buffer usage: + * desc->opcode is always i40e_aqc_opc_send_msg_to_pf + * flags, retval, datalen, and data addr are all used normally. + * Firmware copies the cookie fields when sending messages between the PF and + * VF, but uses all other fields internally. Due to this limitation, we + * must send all messages as "indirect", i.e. using an external buffer. + * + * All the vsi indexes are relative to the VF. Each VF can have maximum of + * three VSIs. All the queue indexes are relative to the VSI. Each VF can + * have a maximum of sixteen queues for all of its VSIs. + * + * The PF is required to return a status code in v_retval for all messages + * except RESET_VF, which does not require any response. The return value is of + * i40e_status_code type, defined in the i40e_type.h. + * + * In general, VF driver initialization should roughly follow the order of these + * opcodes. The VF driver must first validate the API version of the PF driver, + * then request a reset, then get resources, then configure queues and + * interrupts. After these operations are complete, the VF driver may start + * its queues, optionally add MAC and VLAN filters, and process traffic. + */ + +/* Opcodes for VF-PF communication. These are placed in the v_opcode field + * of the virtchnl_msg structure. + */ +enum i40e_virtchnl_ops { +/* VF sends req. to pf for the following + * ops. + */ + I40E_VIRTCHNL_OP_UNKNOWN = 0, + I40E_VIRTCHNL_OP_VERSION = 1, /* must ALWAYS be 1 */ + I40E_VIRTCHNL_OP_RESET_VF, + I40E_VIRTCHNL_OP_GET_VF_RESOURCES, + I40E_VIRTCHNL_OP_CONFIG_TX_QUEUE, + I40E_VIRTCHNL_OP_CONFIG_RX_QUEUE, + I40E_VIRTCHNL_OP_CONFIG_VSI_QUEUES, + I40E_VIRTCHNL_OP_CONFIG_IRQ_MAP, + I40E_VIRTCHNL_OP_ENABLE_QUEUES, + I40E_VIRTCHNL_OP_DISABLE_QUEUES, + I40E_VIRTCHNL_OP_ADD_ETHER_ADDRESS, + I40E_VIRTCHNL_OP_DEL_ETHER_ADDRESS, + I40E_VIRTCHNL_OP_ADD_VLAN, + I40E_VIRTCHNL_OP_DEL_VLAN, + I40E_VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE, + I40E_VIRTCHNL_OP_GET_STATS, + I40E_VIRTCHNL_OP_FCOE, +/* PF sends status change events to vfs using + * the following op. + */ + I40E_VIRTCHNL_OP_EVENT, +}; + +/* Virtual channel message descriptor. This overlays the admin queue + * descriptor. All other data is passed in external buffers. + */ + +struct i40e_virtchnl_msg { + u8 pad[8]; /* AQ flags/opcode/len/retval fields */ + enum i40e_virtchnl_ops v_opcode; /* avoid confusion with desc->opcode */ + i40e_status v_retval; /* ditto for desc->retval */ + u32 vfid; /* used by PF when sending to VF */ +}; + +/* Message descriptions and data structures.*/ + +/* I40E_VIRTCHNL_OP_VERSION + * VF posts its version number to the PF. PF responds with its version number + * in the same format, along with a return code. + * Reply from PF has its major/minor versions also in param0 and param1. + * If there is a major version mismatch, then the VF cannot operate. + * If there is a minor version mismatch, then the VF can operate but should + * add a warning to the system log. + * + * This enum element MUST always be specified as == 1, regardless of other + * changes in the API. The PF must always respond to this message without + * error regardless of version mismatch. + */ +#define I40E_VIRTCHNL_VERSION_MAJOR 1 +#define I40E_VIRTCHNL_VERSION_MINOR 0 +struct i40e_virtchnl_version_info { + u32 major; + u32 minor; +}; + +/* I40E_VIRTCHNL_OP_RESET_VF + * VF sends this request to PF with no parameters + * PF does NOT respond! VF driver must delay then poll VFGEN_RSTAT register + * until reset completion is indicated. The admin queue must be reinitialized + * after this operation. + * + * When reset is complete, PF must ensure that all queues in all VSIs associated + * with the VF are stopped, all queue configurations in the HMC are set to 0, + * and all MAC and VLAN filters (except the default MAC address) on all VSIs + * are cleared. + */ + +/* I40E_VIRTCHNL_OP_GET_VF_RESOURCES + * VF sends this request to PF with no parameters + * PF responds with an indirect message containing + * i40e_virtchnl_vf_resource and one or more + * i40e_virtchnl_vsi_resource structures. + */ + +struct i40e_virtchnl_vsi_resource { + u16 vsi_id; + u16 num_queue_pairs; + enum i40e_vsi_type vsi_type; + u16 qset_handle; + u8 default_mac_addr[ETH_ALEN]; +}; +/* VF offload flags */ +#define I40E_VIRTCHNL_VF_OFFLOAD_L2 0x00000001 +#define I40E_VIRTCHNL_VF_OFFLOAD_FCOE 0x00000004 +#define I40E_VIRTCHNL_VF_OFFLOAD_VLAN 0x00010000 + +struct i40e_virtchnl_vf_resource { + u16 num_vsis; + u16 num_queue_pairs; + u16 max_vectors; + u16 max_mtu; + + u32 vf_offload_flags; + u32 max_fcoe_contexts; + u32 max_fcoe_filters; + + struct i40e_virtchnl_vsi_resource vsi_res[1]; +}; + +/* I40E_VIRTCHNL_OP_CONFIG_TX_QUEUE + * VF sends this message to set up parameters for one TX queue. + * External data buffer contains one instance of i40e_virtchnl_txq_info. + * PF configures requested queue and returns a status code. + */ + +/* Tx queue config info */ +struct i40e_virtchnl_txq_info { + u16 vsi_id; + u16 queue_id; + u16 ring_len; /* number of descriptors, multiple of 8 */ + u16 headwb_enabled; + u64 dma_ring_addr; + u64 dma_headwb_addr; +}; + +/* I40E_VIRTCHNL_OP_CONFIG_RX_QUEUE + * VF sends this message to set up parameters for one RX queue. + * External data buffer contains one instance of i40e_virtchnl_rxq_info. + * PF configures requested queue and returns a status code. + */ + +/* Rx queue config info */ +struct i40e_virtchnl_rxq_info { + u16 vsi_id; + u16 queue_id; + u32 ring_len; /* number of descriptors, multiple of 32 */ + u16 hdr_size; + u16 splithdr_enabled; + u32 databuffer_size; + u32 max_pkt_size; + u64 dma_ring_addr; + enum i40e_hmc_obj_rx_hsplit_0 rx_split_pos; +}; + +/* I40E_VIRTCHNL_OP_CONFIG_VSI_QUEUES + * VF sends this message to set parameters for all active TX and RX queues + * associated with the specified VSI. + * PF configures queues and returns status. + * If the number of queues specified is greater than the number of queues + * associated with the VSI, an error is returned and no queues are configured. + */ +struct i40e_virtchnl_queue_pair_info { + /* NOTE: vsi_id and queue_id should be identical for both queues. */ + struct i40e_virtchnl_txq_info txq; + struct i40e_virtchnl_rxq_info rxq; +}; + +struct i40e_virtchnl_vsi_queue_config_info { + u16 vsi_id; + u16 num_queue_pairs; + struct i40e_virtchnl_queue_pair_info qpair[1]; +}; + +/* I40E_VIRTCHNL_OP_CONFIG_IRQ_MAP + * VF uses this message to map vectors to queues. + * The rxq_map and txq_map fields are bitmaps used to indicate which queues + * are to be associated with the specified vector. + * The "other" causes are always mapped to vector 0. + * PF configures interrupt mapping and returns status. + */ +struct i40e_virtchnl_vector_map { + u16 vsi_id; + u16 vector_id; + u16 rxq_map; + u16 txq_map; + u16 rxitr_idx; + u16 txitr_idx; +}; + +struct i40e_virtchnl_irq_map_info { + u16 num_vectors; + struct i40e_virtchnl_vector_map vecmap[1]; +}; + +/* I40E_VIRTCHNL_OP_ENABLE_QUEUES + * I40E_VIRTCHNL_OP_DISABLE_QUEUES + * VF sends these message to enable or disable TX/RX queue pairs. + * The queues fields are bitmaps indicating which queues to act upon. + * (Currently, we only support 16 queues per VF, but we make the field + * u32 to allow for expansion.) + * PF performs requested action and returns status. + */ +struct i40e_virtchnl_queue_select { + u16 vsi_id; + u16 pad; + u32 rx_queues; + u32 tx_queues; +}; + +/* I40E_VIRTCHNL_OP_ADD_ETHER_ADDRESS + * VF sends this message in order to add one or more unicast or multicast + * address filters for the specified VSI. + * PF adds the filters and returns status. + */ + +/* I40E_VIRTCHNL_OP_DEL_ETHER_ADDRESS + * VF sends this message in order to remove one or more unicast or multicast + * filters for the specified VSI. + * PF removes the filters and returns status. + */ + +struct i40e_virtchnl_ether_addr { + u8 addr[ETH_ALEN]; + u8 pad[2]; +}; + +struct i40e_virtchnl_ether_addr_list { + u16 vsi_id; + u16 num_elements; + struct i40e_virtchnl_ether_addr list[1]; +}; + +/* I40E_VIRTCHNL_OP_ADD_VLAN + * VF sends this message to add one or more VLAN tag filters for receives. + * PF adds the filters and returns status. + * If a port VLAN is configured by the PF, this operation will return an + * error to the VF. + */ + +/* I40E_VIRTCHNL_OP_DEL_VLAN + * VF sends this message to remove one or more VLAN tag filters for receives. + * PF removes the filters and returns status. + * If a port VLAN is configured by the PF, this operation will return an + * error to the VF. + */ + +struct i40e_virtchnl_vlan_filter_list { + u16 vsi_id; + u16 num_elements; + u16 vlan_id[1]; +}; + +/* I40E_VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE + * VF sends VSI id and flags. + * PF returns status code in retval. + * Note: we assume that broadcast accept mode is always enabled. + */ +struct i40e_virtchnl_promisc_info { + u16 vsi_id; + u16 flags; +}; + +#define I40E_FLAG_VF_UNICAST_PROMISC 0x00000001 +#define I40E_FLAG_VF_MULTICAST_PROMISC 0x00000002 + +/* I40E_VIRTCHNL_OP_GET_STATS + * VF sends this message to request stats for the selected VSI. VF uses + * the i40e_virtchnl_queue_select struct to specify the VSI. The queue_id + * field is ignored by the PF. + * + * PF replies with struct i40e_eth_stats in an external buffer. + */ + +/* I40E_VIRTCHNL_OP_EVENT + * PF sends this message to inform the VF driver of events that may affect it. + * No direct response is expected from the VF, though it may generate other + * messages in response to this one. + */ +enum i40e_virtchnl_event_codes { + I40E_VIRTCHNL_EVENT_UNKNOWN = 0, + I40E_VIRTCHNL_EVENT_LINK_CHANGE, + I40E_VIRTCHNL_EVENT_RESET_IMPENDING, + I40E_VIRTCHNL_EVENT_PF_DRIVER_CLOSE, +}; +#define I40E_PF_EVENT_SEVERITY_INFO 0 +#define I40E_PF_EVENT_SEVERITY_CERTAIN_DOOM 255 + +struct i40e_virtchnl_pf_event { + enum i40e_virtchnl_event_codes event; + union { + struct { + enum i40e_aq_link_speed link_speed; + bool link_status; + } link_event; + } event_data; + + int severity; +}; + +/* The following are TBD, not necessary for LAN functionality. + * I40E_VIRTCHNL_OP_FCOE + */ + +/* VF reset states - these are written into the RSTAT register: + * I40E_VFGEN_RSTAT1 on the PF + * I40E_VFGEN_RSTAT on the VF + * When the PF initiates a reset, it writes 0 + * When the reset is complete, it writes 1 + * When the PF detects that the VF has recovered, it writes 2 + * VF checks this register periodically to determine if a reset has occurred, + * then polls it to know when the reset is complete. + * If either the PF or VF reads the register while the hardware + * is in a reset state, it will return DEADBEEF, which, when masked + * will result in 3. + */ +enum i40e_vfr_states { + I40E_VFR_INPROGRESS = 0, + I40E_VFR_COMPLETED, + I40E_VFR_VFACTIVE, + I40E_VFR_UNKNOWN, +}; + +#endif /* _I40E_VIRTCHNL_H_ */ |