diff options
Diffstat (limited to 'drivers/net/ethernet/dec/tulip/xircom_cb.c')
| -rw-r--r-- | drivers/net/ethernet/dec/tulip/xircom_cb.c | 1154 |
1 files changed, 1154 insertions, 0 deletions
diff --git a/drivers/net/ethernet/dec/tulip/xircom_cb.c b/drivers/net/ethernet/dec/tulip/xircom_cb.c new file mode 100644 index 00000000000..988b8eb24d3 --- /dev/null +++ b/drivers/net/ethernet/dec/tulip/xircom_cb.c @@ -0,0 +1,1154 @@ +/* + * xircom_cb: A driver for the (tulip-like) Xircom Cardbus ethernet cards + * + * This software is (C) by the respective authors, and licensed under the GPL + * License. + * + * Written by Arjan van de Ven for Red Hat, Inc. + * Based on work by Jeff Garzik, Doug Ledford and Donald Becker + * + * This software may be used and distributed according to the terms + * of the GNU General Public License, incorporated herein by reference. + * + * + * $Id: xircom_cb.c,v 1.33 2001/03/19 14:02:07 arjanv Exp $ + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/bitops.h> + +#include <asm/uaccess.h> +#include <asm/io.h> +#ifdef CONFIG_NET_POLL_CONTROLLER +#include <asm/irq.h> +#endif + +MODULE_DESCRIPTION("Xircom Cardbus ethernet driver"); +MODULE_AUTHOR("Arjan van de Ven <arjanv@redhat.com>"); +MODULE_LICENSE("GPL"); + + + +/* IO registers on the card, offsets */ +#define CSR0 0x00 +#define CSR1 0x08 +#define CSR2 0x10 +#define CSR3 0x18 +#define CSR4 0x20 +#define CSR5 0x28 +#define CSR6 0x30 +#define CSR7 0x38 +#define CSR8 0x40 +#define CSR9 0x48 +#define CSR10 0x50 +#define CSR11 0x58 +#define CSR12 0x60 +#define CSR13 0x68 +#define CSR14 0x70 +#define CSR15 0x78 +#define CSR16 0x80 + +/* PCI registers */ +#define PCI_POWERMGMT 0x40 + +/* Offsets of the buffers within the descriptor pages, in bytes */ + +#define NUMDESCRIPTORS 4 + +static int bufferoffsets[NUMDESCRIPTORS] = {128,2048,4096,6144}; + + +struct xircom_private { + /* Send and receive buffers, kernel-addressable and dma addressable forms */ + + __le32 *rx_buffer; + __le32 *tx_buffer; + + dma_addr_t rx_dma_handle; + dma_addr_t tx_dma_handle; + + struct sk_buff *tx_skb[4]; + + unsigned long io_port; + int open; + + /* transmit_used is the rotating counter that indicates which transmit + descriptor has to be used next */ + int transmit_used; + + /* Spinlock to serialize register operations. + It must be helt while manipulating the following registers: + CSR0, CSR6, CSR7, CSR9, CSR10, CSR15 + */ + spinlock_t lock; + + struct pci_dev *pdev; + struct net_device *dev; +}; + + +/* Function prototypes */ +static int xircom_probe(struct pci_dev *pdev, const struct pci_device_id *id); +static void xircom_remove(struct pci_dev *pdev); +static irqreturn_t xircom_interrupt(int irq, void *dev_instance); +static netdev_tx_t xircom_start_xmit(struct sk_buff *skb, + struct net_device *dev); +static int xircom_open(struct net_device *dev); +static int xircom_close(struct net_device *dev); +static void xircom_up(struct xircom_private *card); +#ifdef CONFIG_NET_POLL_CONTROLLER +static void xircom_poll_controller(struct net_device *dev); +#endif + +static void investigate_read_descriptor(struct net_device *dev,struct xircom_private *card, int descnr, unsigned int bufferoffset); +static void investigate_write_descriptor(struct net_device *dev, struct xircom_private *card, int descnr, unsigned int bufferoffset); +static void read_mac_address(struct xircom_private *card); +static void transceiver_voodoo(struct xircom_private *card); +static void initialize_card(struct xircom_private *card); +static void trigger_transmit(struct xircom_private *card); +static void trigger_receive(struct xircom_private *card); +static void setup_descriptors(struct xircom_private *card); +static void remove_descriptors(struct xircom_private *card); +static int link_status_changed(struct xircom_private *card); +static void activate_receiver(struct xircom_private *card); +static void deactivate_receiver(struct xircom_private *card); +static void activate_transmitter(struct xircom_private *card); +static void deactivate_transmitter(struct xircom_private *card); +static void enable_transmit_interrupt(struct xircom_private *card); +static void enable_receive_interrupt(struct xircom_private *card); +static void enable_link_interrupt(struct xircom_private *card); +static void disable_all_interrupts(struct xircom_private *card); +static int link_status(struct xircom_private *card); + + + +static DEFINE_PCI_DEVICE_TABLE(xircom_pci_table) = { + {0x115D, 0x0003, PCI_ANY_ID, PCI_ANY_ID,}, + {0,}, +}; +MODULE_DEVICE_TABLE(pci, xircom_pci_table); + +static struct pci_driver xircom_ops = { + .name = "xircom_cb", + .id_table = xircom_pci_table, + .probe = xircom_probe, + .remove = xircom_remove, + .suspend =NULL, + .resume =NULL +}; + + +#if defined DEBUG && DEBUG > 1 +static void print_binary(unsigned int number) +{ + int i,i2; + char buffer[64]; + memset(buffer,0,64); + i2=0; + for (i=31;i>=0;i--) { + if (number & (1<<i)) + buffer[i2++]='1'; + else + buffer[i2++]='0'; + if ((i&3)==0) + buffer[i2++]=' '; + } + pr_debug("%s\n",buffer); +} +#endif + +static const struct net_device_ops netdev_ops = { + .ndo_open = xircom_open, + .ndo_stop = xircom_close, + .ndo_start_xmit = xircom_start_xmit, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = xircom_poll_controller, +#endif +}; + +/* xircom_probe is the code that gets called on device insertion. + it sets up the hardware and registers the device to the networklayer. + + TODO: Send 1 or 2 "dummy" packets here as the card seems to discard the + first two packets that get send, and pump hates that. + + */ +static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct net_device *dev = NULL; + struct xircom_private *private; + unsigned long flags; + unsigned short tmp16; + + /* First do the PCI initialisation */ + + if (pci_enable_device(pdev)) + return -ENODEV; + + /* disable all powermanagement */ + pci_write_config_dword(pdev, PCI_POWERMGMT, 0x0000); + + pci_set_master(pdev); /* Why isn't this done by pci_enable_device ?*/ + + /* clear PCI status, if any */ + pci_read_config_word (pdev,PCI_STATUS, &tmp16); + pci_write_config_word (pdev, PCI_STATUS,tmp16); + + if (!request_region(pci_resource_start(pdev, 0), 128, "xircom_cb")) { + pr_err("%s: failed to allocate io-region\n", __func__); + return -ENODEV; + } + + /* + Before changing the hardware, allocate the memory. + This way, we can fail gracefully if not enough memory + is available. + */ + dev = alloc_etherdev(sizeof(struct xircom_private)); + if (!dev) { + pr_err("%s: failed to allocate etherdev\n", __func__); + goto device_fail; + } + private = netdev_priv(dev); + + /* Allocate the send/receive buffers */ + private->rx_buffer = pci_alloc_consistent(pdev,8192,&private->rx_dma_handle); + if (private->rx_buffer == NULL) { + pr_err("%s: no memory for rx buffer\n", __func__); + goto rx_buf_fail; + } + private->tx_buffer = pci_alloc_consistent(pdev,8192,&private->tx_dma_handle); + if (private->tx_buffer == NULL) { + pr_err("%s: no memory for tx buffer\n", __func__); + goto tx_buf_fail; + } + + SET_NETDEV_DEV(dev, &pdev->dev); + + + private->dev = dev; + private->pdev = pdev; + private->io_port = pci_resource_start(pdev, 0); + spin_lock_init(&private->lock); + dev->irq = pdev->irq; + dev->base_addr = private->io_port; + + initialize_card(private); + read_mac_address(private); + setup_descriptors(private); + + dev->netdev_ops = &netdev_ops; + pci_set_drvdata(pdev, dev); + + if (register_netdev(dev)) { + pr_err("%s: netdevice registration failed\n", __func__); + goto reg_fail; + } + + netdev_info(dev, "Xircom cardbus revision %i at irq %i\n", + pdev->revision, pdev->irq); + /* start the transmitter to get a heartbeat */ + /* TODO: send 2 dummy packets here */ + transceiver_voodoo(private); + + spin_lock_irqsave(&private->lock,flags); + activate_transmitter(private); + activate_receiver(private); + spin_unlock_irqrestore(&private->lock,flags); + + trigger_receive(private); + + return 0; + +reg_fail: + kfree(private->tx_buffer); +tx_buf_fail: + kfree(private->rx_buffer); +rx_buf_fail: + free_netdev(dev); +device_fail: + return -ENODEV; +} + + +/* + xircom_remove is called on module-unload or on device-eject. + it unregisters the irq, io-region and network device. + Interrupts and such are already stopped in the "ifconfig ethX down" + code. + */ +static void __devexit xircom_remove(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct xircom_private *card = netdev_priv(dev); + + pci_free_consistent(pdev,8192,card->rx_buffer,card->rx_dma_handle); + pci_free_consistent(pdev,8192,card->tx_buffer,card->tx_dma_handle); + + release_region(dev->base_addr, 128); + unregister_netdev(dev); + free_netdev(dev); + pci_set_drvdata(pdev, NULL); +} + +static irqreturn_t xircom_interrupt(int irq, void *dev_instance) +{ + struct net_device *dev = (struct net_device *) dev_instance; + struct xircom_private *card = netdev_priv(dev); + unsigned int status; + int i; + + spin_lock(&card->lock); + status = inl(card->io_port+CSR5); + +#if defined DEBUG && DEBUG > 1 + print_binary(status); + pr_debug("tx status 0x%08x 0x%08x\n", + card->tx_buffer[0], card->tx_buffer[4]); + pr_debug("rx status 0x%08x 0x%08x\n", + card->rx_buffer[0], card->rx_buffer[4]); +#endif + /* Handle shared irq and hotplug */ + if (status == 0 || status == 0xffffffff) { + spin_unlock(&card->lock); + return IRQ_NONE; + } + + if (link_status_changed(card)) { + int newlink; + netdev_dbg(dev, "Link status has changed\n"); + newlink = link_status(card); + netdev_info(dev, "Link is %d mbit\n", newlink); + if (newlink) + netif_carrier_on(dev); + else + netif_carrier_off(dev); + + } + + /* Clear all remaining interrupts */ + status |= 0xffffffff; /* FIXME: make this clear only the + real existing bits */ + outl(status,card->io_port+CSR5); + + + for (i=0;i<NUMDESCRIPTORS;i++) + investigate_write_descriptor(dev,card,i,bufferoffsets[i]); + for (i=0;i<NUMDESCRIPTORS;i++) + investigate_read_descriptor(dev,card,i,bufferoffsets[i]); + + spin_unlock(&card->lock); + return IRQ_HANDLED; +} + +static netdev_tx_t xircom_start_xmit(struct sk_buff *skb, + struct net_device *dev) +{ + struct xircom_private *card; + unsigned long flags; + int nextdescriptor; + int desc; + + card = netdev_priv(dev); + spin_lock_irqsave(&card->lock,flags); + + /* First see if we can free some descriptors */ + for (desc=0;desc<NUMDESCRIPTORS;desc++) + investigate_write_descriptor(dev,card,desc,bufferoffsets[desc]); + + + nextdescriptor = (card->transmit_used +1) % (NUMDESCRIPTORS); + desc = card->transmit_used; + + /* only send the packet if the descriptor is free */ + if (card->tx_buffer[4*desc]==0) { + /* Copy the packet data; zero the memory first as the card + sometimes sends more than you ask it to. */ + + memset(&card->tx_buffer[bufferoffsets[desc]/4],0,1536); + skb_copy_from_linear_data(skb, + &(card->tx_buffer[bufferoffsets[desc] / 4]), + skb->len); + /* FIXME: The specification tells us that the length we send HAS to be a multiple of + 4 bytes. */ + + card->tx_buffer[4*desc+1] = cpu_to_le32(skb->len); + if (desc == NUMDESCRIPTORS - 1) /* bit 25: last descriptor of the ring */ + card->tx_buffer[4*desc+1] |= cpu_to_le32(1<<25); + + card->tx_buffer[4*desc+1] |= cpu_to_le32(0xF0000000); + /* 0xF0... means want interrupts*/ + card->tx_skb[desc] = skb; + + wmb(); + /* This gives the descriptor to the card */ + card->tx_buffer[4*desc] = cpu_to_le32(0x80000000); + trigger_transmit(card); + if (card->tx_buffer[nextdescriptor*4] & cpu_to_le32(0x8000000)) { + /* next descriptor is occupied... */ + netif_stop_queue(dev); + } + card->transmit_used = nextdescriptor; + spin_unlock_irqrestore(&card->lock,flags); + return NETDEV_TX_OK; + } + + /* Uh oh... no free descriptor... drop the packet */ + netif_stop_queue(dev); + spin_unlock_irqrestore(&card->lock,flags); + trigger_transmit(card); + + return NETDEV_TX_BUSY; +} + + + + +static int xircom_open(struct net_device *dev) +{ + struct xircom_private *xp = netdev_priv(dev); + int retval; + + netdev_info(dev, "xircom cardbus adaptor found, using irq %i\n", + dev->irq); + retval = request_irq(dev->irq, xircom_interrupt, IRQF_SHARED, dev->name, dev); + if (retval) + return retval; + + xircom_up(xp); + xp->open = 1; + + return 0; +} + +static int xircom_close(struct net_device *dev) +{ + struct xircom_private *card; + unsigned long flags; + + card = netdev_priv(dev); + netif_stop_queue(dev); /* we don't want new packets */ + + + spin_lock_irqsave(&card->lock,flags); + + disable_all_interrupts(card); +#if 0 + /* We can enable this again once we send dummy packets on ifconfig ethX up */ + deactivate_receiver(card); + deactivate_transmitter(card); +#endif + remove_descriptors(card); + + spin_unlock_irqrestore(&card->lock,flags); + + card->open = 0; + free_irq(dev->irq,dev); + + return 0; + +} + + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void xircom_poll_controller(struct net_device *dev) +{ + disable_irq(dev->irq); + xircom_interrupt(dev->irq, dev); + enable_irq(dev->irq); +} +#endif + + +static void initialize_card(struct xircom_private *card) +{ + unsigned int val; + unsigned long flags; + + spin_lock_irqsave(&card->lock, flags); + + /* First: reset the card */ + val = inl(card->io_port + CSR0); + val |= 0x01; /* Software reset */ + outl(val, card->io_port + CSR0); + + udelay(100); /* give the card some time to reset */ + + val = inl(card->io_port + CSR0); + val &= ~0x01; /* disable Software reset */ + outl(val, card->io_port + CSR0); + + + val = 0; /* Value 0x00 is a safe and conservative value + for the PCI configuration settings */ + outl(val, card->io_port + CSR0); + + + disable_all_interrupts(card); + deactivate_receiver(card); + deactivate_transmitter(card); + + spin_unlock_irqrestore(&card->lock, flags); +} + +/* +trigger_transmit causes the card to check for frames to be transmitted. +This is accomplished by writing to the CSR1 port. The documentation +claims that the act of writing is sufficient and that the value is +ignored; I chose zero. +*/ +static void trigger_transmit(struct xircom_private *card) +{ + unsigned int val; + + val = 0; + outl(val, card->io_port + CSR1); +} + +/* +trigger_receive causes the card to check for empty frames in the +descriptor list in which packets can be received. +This is accomplished by writing to the CSR2 port. The documentation +claims that the act of writing is sufficient and that the value is +ignored; I chose zero. +*/ +static void trigger_receive(struct xircom_private *card) +{ + unsigned int val; + + val = 0; + outl(val, card->io_port + CSR2); +} + +/* +setup_descriptors initializes the send and receive buffers to be valid +descriptors and programs the addresses into the card. +*/ +static void setup_descriptors(struct xircom_private *card) +{ + u32 address; + int i; + + BUG_ON(card->rx_buffer == NULL); + BUG_ON(card->tx_buffer == NULL); + + /* Receive descriptors */ + memset(card->rx_buffer, 0, 128); /* clear the descriptors */ + for (i=0;i<NUMDESCRIPTORS;i++ ) { + + /* Rx Descr0: It's empty, let the card own it, no errors -> 0x80000000 */ + card->rx_buffer[i*4 + 0] = cpu_to_le32(0x80000000); + /* Rx Descr1: buffer 1 is 1536 bytes, buffer 2 is 0 bytes */ + card->rx_buffer[i*4 + 1] = cpu_to_le32(1536); + if (i == NUMDESCRIPTORS - 1) /* bit 25 is "last descriptor" */ + card->rx_buffer[i*4 + 1] |= cpu_to_le32(1 << 25); + + /* Rx Descr2: address of the buffer + we store the buffer at the 2nd half of the page */ + + address = card->rx_dma_handle; + card->rx_buffer[i*4 + 2] = cpu_to_le32(address + bufferoffsets[i]); + /* Rx Desc3: address of 2nd buffer -> 0 */ + card->rx_buffer[i*4 + 3] = 0; + } + + wmb(); + /* Write the receive descriptor ring address to the card */ + address = card->rx_dma_handle; + outl(address, card->io_port + CSR3); /* Receive descr list address */ + + + /* transmit descriptors */ + memset(card->tx_buffer, 0, 128); /* clear the descriptors */ + + for (i=0;i<NUMDESCRIPTORS;i++ ) { + /* Tx Descr0: Empty, we own it, no errors -> 0x00000000 */ + card->tx_buffer[i*4 + 0] = 0x00000000; + /* Tx Descr1: buffer 1 is 1536 bytes, buffer 2 is 0 bytes */ + card->tx_buffer[i*4 + 1] = cpu_to_le32(1536); + if (i == NUMDESCRIPTORS - 1) /* bit 25 is "last descriptor" */ + card->tx_buffer[i*4 + 1] |= cpu_to_le32(1 << 25); + + /* Tx Descr2: address of the buffer + we store the buffer at the 2nd half of the page */ + address = card->tx_dma_handle; + card->tx_buffer[i*4 + 2] = cpu_to_le32(address + bufferoffsets[i]); + /* Tx Desc3: address of 2nd buffer -> 0 */ + card->tx_buffer[i*4 + 3] = 0; + } + + wmb(); + /* wite the transmit descriptor ring to the card */ + address = card->tx_dma_handle; + outl(address, card->io_port + CSR4); /* xmit descr list address */ +} + +/* +remove_descriptors informs the card the descriptors are no longer +valid by setting the address in the card to 0x00. +*/ +static void remove_descriptors(struct xircom_private *card) +{ + unsigned int val; + + val = 0; + outl(val, card->io_port + CSR3); /* Receive descriptor address */ + outl(val, card->io_port + CSR4); /* Send descriptor address */ +} + +/* +link_status_changed returns 1 if the card has indicated that +the link status has changed. The new link status has to be read from CSR12. + +This function also clears the status-bit. +*/ +static int link_status_changed(struct xircom_private *card) +{ + unsigned int val; + + val = inl(card->io_port + CSR5); /* Status register */ + + if ((val & (1 << 27)) == 0) /* no change */ + return 0; + + /* clear the event by writing a 1 to the bit in the + status register. */ + val = (1 << 27); + outl(val, card->io_port + CSR5); + + return 1; +} + + +/* +transmit_active returns 1 if the transmitter on the card is +in a non-stopped state. +*/ +static int transmit_active(struct xircom_private *card) +{ + unsigned int val; + + val = inl(card->io_port + CSR5); /* Status register */ + + if ((val & (7 << 20)) == 0) /* transmitter disabled */ + return 0; + + return 1; +} + +/* +receive_active returns 1 if the receiver on the card is +in a non-stopped state. +*/ +static int receive_active(struct xircom_private *card) +{ + unsigned int val; + + val = inl(card->io_port + CSR5); /* Status register */ + + if ((val & (7 << 17)) == 0) /* receiver disabled */ + return 0; + + return 1; +} + +/* +activate_receiver enables the receiver on the card. +Before being allowed to active the receiver, the receiver +must be completely de-activated. To achieve this, +this code actually disables the receiver first; then it waits for the +receiver to become inactive, then it activates the receiver and then +it waits for the receiver to be active. + +must be called with the lock held and interrupts disabled. +*/ +static void activate_receiver(struct xircom_private *card) +{ + unsigned int val; + int counter; + + val = inl(card->io_port + CSR6); /* Operation mode */ + + /* If the "active" bit is set and the receiver is already + active, no need to do the expensive thing */ + if ((val&2) && (receive_active(card))) + return; + + + val = val & ~2; /* disable the receiver */ + outl(val, card->io_port + CSR6); + + counter = 10; + while (counter > 0) { + if (!receive_active(card)) + break; + /* wait a while */ + udelay(50); + counter--; + if (counter <= 0) + netdev_err(card->dev, "Receiver failed to deactivate\n"); + } + + /* enable the receiver */ + val = inl(card->io_port + CSR6); /* Operation mode */ + val = val | 2; /* enable the receiver */ + outl(val, card->io_port + CSR6); + + /* now wait for the card to activate again */ + counter = 10; + while (counter > 0) { + if (receive_active(card)) + break; + /* wait a while */ + udelay(50); + counter--; + if (counter <= 0) + netdev_err(card->dev, + "Receiver failed to re-activate\n"); + } +} + +/* +deactivate_receiver disables the receiver on the card. +To achieve this this code disables the receiver first; +then it waits for the receiver to become inactive. + +must be called with the lock held and interrupts disabled. +*/ +static void deactivate_receiver(struct xircom_private *card) +{ + unsigned int val; + int counter; + + val = inl(card->io_port + CSR6); /* Operation mode */ + val = val & ~2; /* disable the receiver */ + outl(val, card->io_port + CSR6); + + counter = 10; + while (counter > 0) { + if (!receive_active(card)) + break; + /* wait a while */ + udelay(50); + counter--; + if (counter <= 0) + netdev_err(card->dev, "Receiver failed to deactivate\n"); + } +} + + +/* +activate_transmitter enables the transmitter on the card. +Before being allowed to active the transmitter, the transmitter +must be completely de-activated. To achieve this, +this code actually disables the transmitter first; then it waits for the +transmitter to become inactive, then it activates the transmitter and then +it waits for the transmitter to be active again. + +must be called with the lock held and interrupts disabled. +*/ +static void activate_transmitter(struct xircom_private *card) +{ + unsigned int val; + int counter; + + val = inl(card->io_port + CSR6); /* Operation mode */ + + /* If the "active" bit is set and the receiver is already + active, no need to do the expensive thing */ + if ((val&(1<<13)) && (transmit_active(card))) + return; + + val = val & ~(1 << 13); /* disable the transmitter */ + outl(val, card->io_port + CSR6); + + counter = 10; + while (counter > 0) { + if (!transmit_active(card)) + break; + /* wait a while */ + udelay(50); + counter--; + if (counter <= 0) + netdev_err(card->dev, + "Transmitter failed to deactivate\n"); + } + + /* enable the transmitter */ + val = inl(card->io_port + CSR6); /* Operation mode */ + val = val | (1 << 13); /* enable the transmitter */ + outl(val, card->io_port + CSR6); + + /* now wait for the card to activate again */ + counter = 10; + while (counter > 0) { + if (transmit_active(card)) + break; + /* wait a while */ + udelay(50); + counter--; + if (counter <= 0) + netdev_err(card->dev, + "Transmitter failed to re-activate\n"); + } +} + +/* +deactivate_transmitter disables the transmitter on the card. +To achieve this this code disables the transmitter first; +then it waits for the transmitter to become inactive. + +must be called with the lock held and interrupts disabled. +*/ +static void deactivate_transmitter(struct xircom_private *card) +{ + unsigned int val; + int counter; + + val = inl(card->io_port + CSR6); /* Operation mode */ + val = val & ~2; /* disable the transmitter */ + outl(val, card->io_port + CSR6); + + counter = 20; + while (counter > 0) { + if (!transmit_active(card)) + break; + /* wait a while */ + udelay(50); + counter--; + if (counter <= 0) + netdev_err(card->dev, + "Transmitter failed to deactivate\n"); + } +} + + +/* +enable_transmit_interrupt enables the transmit interrupt + +must be called with the lock held and interrupts disabled. +*/ +static void enable_transmit_interrupt(struct xircom_private *card) +{ + unsigned int val; + + val = inl(card->io_port + CSR7); /* Interrupt enable register */ + val |= 1; /* enable the transmit interrupt */ + outl(val, card->io_port + CSR7); +} + + +/* +enable_receive_interrupt enables the receive interrupt + +must be called with the lock held and interrupts disabled. +*/ +static void enable_receive_interrupt(struct xircom_private *card) +{ + unsigned int val; + + val = inl(card->io_port + CSR7); /* Interrupt enable register */ + val = val | (1 << 6); /* enable the receive interrupt */ + outl(val, card->io_port + CSR7); +} + +/* +enable_link_interrupt enables the link status change interrupt + +must be called with the lock held and interrupts disabled. +*/ +static void enable_link_interrupt(struct xircom_private *card) +{ + unsigned int val; + + val = inl(card->io_port + CSR7); /* Interrupt enable register */ + val = val | (1 << 27); /* enable the link status chage interrupt */ + outl(val, card->io_port + CSR7); +} + + + +/* +disable_all_interrupts disables all interrupts + +must be called with the lock held and interrupts disabled. +*/ +static void disable_all_interrupts(struct xircom_private *card) +{ + unsigned int val; + + val = 0; /* disable all interrupts */ + outl(val, card->io_port + CSR7); +} + +/* +enable_common_interrupts enables several weird interrupts + +must be called with the lock held and interrupts disabled. +*/ +static void enable_common_interrupts(struct xircom_private *card) +{ + unsigned int val; + + val = inl(card->io_port + CSR7); /* Interrupt enable register */ + val |= (1<<16); /* Normal Interrupt Summary */ + val |= (1<<15); /* Abnormal Interrupt Summary */ + val |= (1<<13); /* Fatal bus error */ + val |= (1<<8); /* Receive Process Stopped */ + val |= (1<<7); /* Receive Buffer Unavailable */ + val |= (1<<5); /* Transmit Underflow */ + val |= (1<<2); /* Transmit Buffer Unavailable */ + val |= (1<<1); /* Transmit Process Stopped */ + outl(val, card->io_port + CSR7); +} + +/* +enable_promisc starts promisc mode + +must be called with the lock held and interrupts disabled. +*/ +static int enable_promisc(struct xircom_private *card) +{ + unsigned int val; + + val = inl(card->io_port + CSR6); + val = val | (1 << 6); + outl(val, card->io_port + CSR6); + + return 1; +} + + + + +/* +link_status() checks the links status and will return 0 for no link, 10 for 10mbit link and 100 for.. guess what. + +Must be called in locked state with interrupts disabled +*/ +static int link_status(struct xircom_private *card) +{ + unsigned int val; + + val = inb(card->io_port + CSR12); + + if (!(val&(1<<2))) /* bit 2 is 0 for 10mbit link, 1 for not an 10mbit link */ + return 10; + if (!(val&(1<<1))) /* bit 1 is 0 for 100mbit link, 1 for not an 100mbit link */ + return 100; + + /* If we get here -> no link at all */ + + return 0; +} + + + + + +/* + read_mac_address() reads the MAC address from the NIC and stores it in the "dev" structure. + + This function will take the spinlock itself and can, as a result, not be called with the lock helt. + */ +static void read_mac_address(struct xircom_private *card) +{ + unsigned char j, tuple, link, data_id, data_count; + unsigned long flags; + int i; + + spin_lock_irqsave(&card->lock, flags); + + outl(1 << 12, card->io_port + CSR9); /* enable boot rom access */ + for (i = 0x100; i < 0x1f7; i += link + 2) { + outl(i, card->io_port + CSR10); + tuple = inl(card->io_port + CSR9) & 0xff; + outl(i + 1, card->io_port + CSR10); + link = inl(card->io_port + CSR9) & 0xff; + outl(i + 2, card->io_port + CSR10); + data_id = inl(card->io_port + CSR9) & 0xff; + outl(i + 3, card->io_port + CSR10); + data_count = inl(card->io_port + CSR9) & 0xff; + if ((tuple == 0x22) && (data_id == 0x04) && (data_count == 0x06)) { + /* + * This is it. We have the data we want. + */ + for (j = 0; j < 6; j++) { + outl(i + j + 4, card->io_port + CSR10); + card->dev->dev_addr[j] = inl(card->io_port + CSR9) & 0xff; + } + break; + } else if (link == 0) { + break; + } + } + spin_unlock_irqrestore(&card->lock, flags); + pr_debug(" %pM\n", card->dev->dev_addr); +} + + +/* + transceiver_voodoo() enables the external UTP plug thingy. + it's called voodoo as I stole this code and cannot cross-reference + it with the specification. + */ +static void transceiver_voodoo(struct xircom_private *card) +{ + unsigned long flags; + + /* disable all powermanagement */ + pci_write_config_dword(card->pdev, PCI_POWERMGMT, 0x0000); + + setup_descriptors(card); + + spin_lock_irqsave(&card->lock, flags); + + outl(0x0008, card->io_port + CSR15); + udelay(25); + outl(0xa8050000, card->io_port + CSR15); + udelay(25); + outl(0xa00f0000, card->io_port + CSR15); + udelay(25); + + spin_unlock_irqrestore(&card->lock, flags); + + netif_start_queue(card->dev); +} + + +static void xircom_up(struct xircom_private *card) +{ + unsigned long flags; + int i; + + /* disable all powermanagement */ + pci_write_config_dword(card->pdev, PCI_POWERMGMT, 0x0000); + + setup_descriptors(card); + + spin_lock_irqsave(&card->lock, flags); + + + enable_link_interrupt(card); + enable_transmit_interrupt(card); + enable_receive_interrupt(card); + enable_common_interrupts(card); + enable_promisc(card); + + /* The card can have received packets already, read them away now */ + for (i=0;i<NUMDESCRIPTORS;i++) + investigate_read_descriptor(card->dev,card,i,bufferoffsets[i]); + + + spin_unlock_irqrestore(&card->lock, flags); + trigger_receive(card); + trigger_transmit(card); + netif_start_queue(card->dev); +} + +/* Bufferoffset is in BYTES */ +static void +investigate_read_descriptor(struct net_device *dev, struct xircom_private *card, + int descnr, unsigned int bufferoffset) +{ + int status; + + status = le32_to_cpu(card->rx_buffer[4*descnr]); + + if (status > 0) { /* packet received */ + + /* TODO: discard error packets */ + + short pkt_len = ((status >> 16) & 0x7ff) - 4; + /* minus 4, we don't want the CRC */ + struct sk_buff *skb; + + if (pkt_len > 1518) { + netdev_err(dev, "Packet length %i is bogus\n", pkt_len); + pkt_len = 1518; + } + + skb = dev_alloc_skb(pkt_len + 2); + if (skb == NULL) { + dev->stats.rx_dropped++; + goto out; + } + skb_reserve(skb, 2); + skb_copy_to_linear_data(skb, + &card->rx_buffer[bufferoffset / 4], + pkt_len); + skb_put(skb, pkt_len); + skb->protocol = eth_type_trans(skb, dev); + netif_rx(skb); + dev->stats.rx_packets++; + dev->stats.rx_bytes += pkt_len; + +out: + /* give the buffer back to the card */ + card->rx_buffer[4*descnr] = cpu_to_le32(0x80000000); + trigger_receive(card); + } +} + + +/* Bufferoffset is in BYTES */ +static void +investigate_write_descriptor(struct net_device *dev, + struct xircom_private *card, + int descnr, unsigned int bufferoffset) +{ + int status; + + status = le32_to_cpu(card->tx_buffer[4*descnr]); +#if 0 + if (status & 0x8000) { /* Major error */ + pr_err("Major transmit error status %x\n", status); + card->tx_buffer[4*descnr] = 0; + netif_wake_queue (dev); + } +#endif + if (status > 0) { /* bit 31 is 0 when done */ + if (card->tx_skb[descnr]!=NULL) { + dev->stats.tx_bytes += card->tx_skb[descnr]->len; + dev_kfree_skb_irq(card->tx_skb[descnr]); + } + card->tx_skb[descnr] = NULL; + /* Bit 8 in the status field is 1 if there was a collision */ + if (status & (1 << 8)) + dev->stats.collisions++; + card->tx_buffer[4*descnr] = 0; /* descriptor is free again */ + netif_wake_queue (dev); + dev->stats.tx_packets++; + } +} + +static int __init xircom_init(void) +{ + return pci_register_driver(&xircom_ops); +} + +static void __exit xircom_exit(void) +{ + pci_unregister_driver(&xircom_ops); +} + +module_init(xircom_init) +module_exit(xircom_exit) + |