diff options
Diffstat (limited to 'drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h')
| -rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h | 1297 |
1 files changed, 1297 insertions, 0 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h new file mode 100644 index 00000000000..9a517c2e9f1 --- /dev/null +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h @@ -0,0 +1,1297 @@ +/* bnx2x_sp.h: Broadcom Everest network driver. + * + * Copyright 2011 Broadcom Corporation + * + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License version 2, available + * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL"). + * + * Notwithstanding the above, under no circumstances may you combine this + * software in any way with any other Broadcom software provided under a + * license other than the GPL, without Broadcom's express prior written + * consent. + * + * Maintained by: Eilon Greenstein <eilong@broadcom.com> + * Written by: Vladislav Zolotarov + * + */ +#ifndef BNX2X_SP_VERBS +#define BNX2X_SP_VERBS + +struct bnx2x; +struct eth_context; + +/* Bits representing general command's configuration */ +enum { + RAMROD_TX, + RAMROD_RX, + /* Wait until all pending commands complete */ + RAMROD_COMP_WAIT, + /* Don't send a ramrod, only update a registry */ + RAMROD_DRV_CLR_ONLY, + /* Configure HW according to the current object state */ + RAMROD_RESTORE, + /* Execute the next command now */ + RAMROD_EXEC, + /* + * Don't add a new command and continue execution of posponed + * commands. If not set a new command will be added to the + * pending commands list. + */ + RAMROD_CONT, +}; + +typedef enum { + BNX2X_OBJ_TYPE_RX, + BNX2X_OBJ_TYPE_TX, + BNX2X_OBJ_TYPE_RX_TX, +} bnx2x_obj_type; + +/* Filtering states */ +enum { + BNX2X_FILTER_MAC_PENDING, + BNX2X_FILTER_VLAN_PENDING, + BNX2X_FILTER_VLAN_MAC_PENDING, + BNX2X_FILTER_RX_MODE_PENDING, + BNX2X_FILTER_RX_MODE_SCHED, + BNX2X_FILTER_ISCSI_ETH_START_SCHED, + BNX2X_FILTER_ISCSI_ETH_STOP_SCHED, + BNX2X_FILTER_FCOE_ETH_START_SCHED, + BNX2X_FILTER_FCOE_ETH_STOP_SCHED, + BNX2X_FILTER_MCAST_PENDING, + BNX2X_FILTER_MCAST_SCHED, + BNX2X_FILTER_RSS_CONF_PENDING, +}; + +struct bnx2x_raw_obj { + u8 func_id; + + /* Queue params */ + u8 cl_id; + u32 cid; + + /* Ramrod data buffer params */ + void *rdata; + dma_addr_t rdata_mapping; + + /* Ramrod state params */ + int state; /* "ramrod is pending" state bit */ + unsigned long *pstate; /* pointer to state buffer */ + + bnx2x_obj_type obj_type; + + int (*wait_comp)(struct bnx2x *bp, + struct bnx2x_raw_obj *o); + + bool (*check_pending)(struct bnx2x_raw_obj *o); + void (*clear_pending)(struct bnx2x_raw_obj *o); + void (*set_pending)(struct bnx2x_raw_obj *o); +}; + +/************************* VLAN-MAC commands related parameters ***************/ +struct bnx2x_mac_ramrod_data { + u8 mac[ETH_ALEN]; +}; + +struct bnx2x_vlan_ramrod_data { + u16 vlan; +}; + +struct bnx2x_vlan_mac_ramrod_data { + u8 mac[ETH_ALEN]; + u16 vlan; +}; + +union bnx2x_classification_ramrod_data { + struct bnx2x_mac_ramrod_data mac; + struct bnx2x_vlan_ramrod_data vlan; + struct bnx2x_vlan_mac_ramrod_data vlan_mac; +}; + +/* VLAN_MAC commands */ +enum bnx2x_vlan_mac_cmd { + BNX2X_VLAN_MAC_ADD, + BNX2X_VLAN_MAC_DEL, + BNX2X_VLAN_MAC_MOVE, +}; + +struct bnx2x_vlan_mac_data { + /* Requested command: BNX2X_VLAN_MAC_XX */ + enum bnx2x_vlan_mac_cmd cmd; + /* + * used to contain the data related vlan_mac_flags bits from + * ramrod parameters. + */ + unsigned long vlan_mac_flags; + + /* Needed for MOVE command */ + struct bnx2x_vlan_mac_obj *target_obj; + + union bnx2x_classification_ramrod_data u; +}; + +/*************************** Exe Queue obj ************************************/ +union bnx2x_exe_queue_cmd_data { + struct bnx2x_vlan_mac_data vlan_mac; + + struct { + /* TODO */ + } mcast; +}; + +struct bnx2x_exeq_elem { + struct list_head link; + + /* Length of this element in the exe_chunk. */ + int cmd_len; + + union bnx2x_exe_queue_cmd_data cmd_data; +}; + +union bnx2x_qable_obj; + +union bnx2x_exeq_comp_elem { + union event_ring_elem *elem; +}; + +struct bnx2x_exe_queue_obj; + +typedef int (*exe_q_validate)(struct bnx2x *bp, + union bnx2x_qable_obj *o, + struct bnx2x_exeq_elem *elem); + +/** + * @return positive is entry was optimized, 0 - if not, negative + * in case of an error. + */ +typedef int (*exe_q_optimize)(struct bnx2x *bp, + union bnx2x_qable_obj *o, + struct bnx2x_exeq_elem *elem); +typedef int (*exe_q_execute)(struct bnx2x *bp, + union bnx2x_qable_obj *o, + struct list_head *exe_chunk, + unsigned long *ramrod_flags); +typedef struct bnx2x_exeq_elem * + (*exe_q_get)(struct bnx2x_exe_queue_obj *o, + struct bnx2x_exeq_elem *elem); + +struct bnx2x_exe_queue_obj { + /* + * Commands pending for an execution. + */ + struct list_head exe_queue; + + /* + * Commands pending for an completion. + */ + struct list_head pending_comp; + + spinlock_t lock; + + /* Maximum length of commands' list for one execution */ + int exe_chunk_len; + + union bnx2x_qable_obj *owner; + + /****** Virtual functions ******/ + /** + * Called before commands execution for commands that are really + * going to be executed (after 'optimize'). + * + * Must run under exe_queue->lock + */ + exe_q_validate validate; + + + /** + * This will try to cancel the current pending commands list + * considering the new command. + * + * Must run under exe_queue->lock + */ + exe_q_optimize optimize; + + /** + * Run the next commands chunk (owner specific). + */ + exe_q_execute execute; + + /** + * Return the exe_queue element containing the specific command + * if any. Otherwise return NULL. + */ + exe_q_get get; +}; +/***************** Classification verbs: Set/Del MAC/VLAN/VLAN-MAC ************/ +/* + * Element in the VLAN_MAC registry list having all currenty configured + * rules. + */ +struct bnx2x_vlan_mac_registry_elem { + struct list_head link; + + /* + * Used to store the cam offset used for the mac/vlan/vlan-mac. + * Relevant for 57710 and 57711 only. VLANs and MACs share the + * same CAM for these chips. + */ + int cam_offset; + + /* Needed for DEL and RESTORE flows */ + unsigned long vlan_mac_flags; + + union bnx2x_classification_ramrod_data u; +}; + +/* Bits representing VLAN_MAC commands specific flags */ +enum { + BNX2X_UC_LIST_MAC, + BNX2X_ETH_MAC, + BNX2X_ISCSI_ETH_MAC, + BNX2X_NETQ_ETH_MAC, + BNX2X_DONT_CONSUME_CAM_CREDIT, + BNX2X_DONT_CONSUME_CAM_CREDIT_DEST, +}; + +struct bnx2x_vlan_mac_ramrod_params { + /* Object to run the command from */ + struct bnx2x_vlan_mac_obj *vlan_mac_obj; + + /* General command flags: COMP_WAIT, etc. */ + unsigned long ramrod_flags; + + /* Command specific configuration request */ + struct bnx2x_vlan_mac_data user_req; +}; + +struct bnx2x_vlan_mac_obj { + struct bnx2x_raw_obj raw; + + /* Bookkeeping list: will prevent the addition of already existing + * entries. + */ + struct list_head head; + + /* TODO: Add it's initialization in the init functions */ + struct bnx2x_exe_queue_obj exe_queue; + + /* MACs credit pool */ + struct bnx2x_credit_pool_obj *macs_pool; + + /* VLANs credit pool */ + struct bnx2x_credit_pool_obj *vlans_pool; + + /* RAMROD command to be used */ + int ramrod_cmd; + + /** + * Checks if ADD-ramrod with the given params may be performed. + * + * @return zero if the element may be added + */ + + int (*check_add)(struct bnx2x_vlan_mac_obj *o, + union bnx2x_classification_ramrod_data *data); + + /** + * Checks if DEL-ramrod with the given params may be performed. + * + * @return true if the element may be deleted + */ + struct bnx2x_vlan_mac_registry_elem * + (*check_del)(struct bnx2x_vlan_mac_obj *o, + union bnx2x_classification_ramrod_data *data); + + /** + * Checks if DEL-ramrod with the given params may be performed. + * + * @return true if the element may be deleted + */ + bool (*check_move)(struct bnx2x_vlan_mac_obj *src_o, + struct bnx2x_vlan_mac_obj *dst_o, + union bnx2x_classification_ramrod_data *data); + + /** + * Update the relevant credit object(s) (consume/return + * correspondingly). + */ + bool (*get_credit)(struct bnx2x_vlan_mac_obj *o); + bool (*put_credit)(struct bnx2x_vlan_mac_obj *o); + bool (*get_cam_offset)(struct bnx2x_vlan_mac_obj *o, int *offset); + bool (*put_cam_offset)(struct bnx2x_vlan_mac_obj *o, int offset); + + /** + * Configures one rule in the ramrod data buffer. + */ + void (*set_one_rule)(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *o, + struct bnx2x_exeq_elem *elem, int rule_idx, + int cam_offset); + + /** + * Delete all configured elements having the given + * vlan_mac_flags specification. Assumes no pending for + * execution commands. Will schedule all all currently + * configured MACs/VLANs/VLAN-MACs matching the vlan_mac_flags + * specification for deletion and will use the given + * ramrod_flags for the last DEL operation. + * + * @param bp + * @param o + * @param ramrod_flags RAMROD_XX flags + * + * @return 0 if the last operation has completed successfully + * and there are no more elements left, positive value + * if there are pending for completion commands, + * negative value in case of failure. + */ + int (*delete_all)(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *o, + unsigned long *vlan_mac_flags, + unsigned long *ramrod_flags); + + /** + * Reconfigures the next MAC/VLAN/VLAN-MAC element from the previously + * configured elements list. + * + * @param bp + * @param p Command parameters (RAMROD_COMP_WAIT bit in + * ramrod_flags is only taken into an account) + * @param ppos a pointer to the cooky that should be given back in the + * next call to make function handle the next element. If + * *ppos is set to NULL it will restart the iterator. + * If returned *ppos == NULL this means that the last + * element has been handled. + * + * @return int + */ + int (*restore)(struct bnx2x *bp, + struct bnx2x_vlan_mac_ramrod_params *p, + struct bnx2x_vlan_mac_registry_elem **ppos); + + /** + * Should be called on a completion arival. + * + * @param bp + * @param o + * @param cqe Completion element we are handling + * @param ramrod_flags if RAMROD_CONT is set the next bulk of + * pending commands will be executed. + * RAMROD_DRV_CLR_ONLY and RAMROD_RESTORE + * may also be set if needed. + * + * @return 0 if there are neither pending nor waiting for + * completion commands. Positive value if there are + * pending for execution or for completion commands. + * Negative value in case of an error (including an + * error in the cqe). + */ + int (*complete)(struct bnx2x *bp, struct bnx2x_vlan_mac_obj *o, + union event_ring_elem *cqe, + unsigned long *ramrod_flags); + + /** + * Wait for completion of all commands. Don't schedule new ones, + * just wait. It assumes that the completion code will schedule + * for new commands. + */ + int (*wait)(struct bnx2x *bp, struct bnx2x_vlan_mac_obj *o); +}; + +/** RX_MODE verbs:DROP_ALL/ACCEPT_ALL/ACCEPT_ALL_MULTI/ACCEPT_ALL_VLAN/NORMAL */ + +/* RX_MODE ramrod spesial flags: set in rx_mode_flags field in + * a bnx2x_rx_mode_ramrod_params. + */ +enum { + BNX2X_RX_MODE_FCOE_ETH, + BNX2X_RX_MODE_ISCSI_ETH, +}; + +enum { + BNX2X_ACCEPT_UNICAST, + BNX2X_ACCEPT_MULTICAST, + BNX2X_ACCEPT_ALL_UNICAST, + BNX2X_ACCEPT_ALL_MULTICAST, + BNX2X_ACCEPT_BROADCAST, + BNX2X_ACCEPT_UNMATCHED, + BNX2X_ACCEPT_ANY_VLAN +}; + +struct bnx2x_rx_mode_ramrod_params { + struct bnx2x_rx_mode_obj *rx_mode_obj; + unsigned long *pstate; + int state; + u8 cl_id; + u32 cid; + u8 func_id; + unsigned long ramrod_flags; + unsigned long rx_mode_flags; + + /* + * rdata is either a pointer to eth_filter_rules_ramrod_data(e2) or to + * a tstorm_eth_mac_filter_config (e1x). + */ + void *rdata; + dma_addr_t rdata_mapping; + + /* Rx mode settings */ + unsigned long rx_accept_flags; + + /* internal switching settings */ + unsigned long tx_accept_flags; +}; + +struct bnx2x_rx_mode_obj { + int (*config_rx_mode)(struct bnx2x *bp, + struct bnx2x_rx_mode_ramrod_params *p); + + int (*wait_comp)(struct bnx2x *bp, + struct bnx2x_rx_mode_ramrod_params *p); +}; + +/********************** Set multicast group ***********************************/ + +struct bnx2x_mcast_list_elem { + struct list_head link; + u8 *mac; +}; + +union bnx2x_mcast_config_data { + u8 *mac; + u8 bin; /* used in a RESTORE flow */ +}; + +struct bnx2x_mcast_ramrod_params { + struct bnx2x_mcast_obj *mcast_obj; + + /* Relevant options are RAMROD_COMP_WAIT and RAMROD_DRV_CLR_ONLY */ + unsigned long ramrod_flags; + + struct list_head mcast_list; /* list of struct bnx2x_mcast_list_elem */ + /** TODO: + * - rename it to macs_num. + * - Add a new command type for handling pending commands + * (remove "zero semantics"). + * + * Length of mcast_list. If zero and ADD_CONT command - post + * pending commands. + */ + int mcast_list_len; +}; + +enum { + BNX2X_MCAST_CMD_ADD, + BNX2X_MCAST_CMD_CONT, + BNX2X_MCAST_CMD_DEL, + BNX2X_MCAST_CMD_RESTORE, +}; + +struct bnx2x_mcast_obj { + struct bnx2x_raw_obj raw; + + union { + struct { + #define BNX2X_MCAST_BINS_NUM 256 + #define BNX2X_MCAST_VEC_SZ (BNX2X_MCAST_BINS_NUM / 64) + u64 vec[BNX2X_MCAST_VEC_SZ]; + + /** Number of BINs to clear. Should be updated + * immediately when a command arrives in order to + * properly create DEL commands. + */ + int num_bins_set; + } aprox_match; + + struct { + struct list_head macs; + int num_macs_set; + } exact_match; + } registry; + + /* Pending commands */ + struct list_head pending_cmds_head; + + /* A state that is set in raw.pstate, when there are pending commands */ + int sched_state; + + /* Maximal number of mcast MACs configured in one command */ + int max_cmd_len; + + /* Total number of currently pending MACs to configure: both + * in the pending commands list and in the current command. + */ + int total_pending_num; + + u8 engine_id; + + /** + * @param cmd command to execute (BNX2X_MCAST_CMD_X, see above) + */ + int (*config_mcast)(struct bnx2x *bp, + struct bnx2x_mcast_ramrod_params *p, int cmd); + + /** + * Fills the ramrod data during the RESTORE flow. + * + * @param bp + * @param o + * @param start_idx Registry index to start from + * @param rdata_idx Index in the ramrod data to start from + * + * @return -1 if we handled the whole registry or index of the last + * handled registry element. + */ + int (*hdl_restore)(struct bnx2x *bp, struct bnx2x_mcast_obj *o, + int start_bin, int *rdata_idx); + + int (*enqueue_cmd)(struct bnx2x *bp, struct bnx2x_mcast_obj *o, + struct bnx2x_mcast_ramrod_params *p, int cmd); + + void (*set_one_rule)(struct bnx2x *bp, + struct bnx2x_mcast_obj *o, int idx, + union bnx2x_mcast_config_data *cfg_data, int cmd); + + /** Checks if there are more mcast MACs to be set or a previous + * command is still pending. + */ + bool (*check_pending)(struct bnx2x_mcast_obj *o); + + /** + * Set/Clear/Check SCHEDULED state of the object + */ + void (*set_sched)(struct bnx2x_mcast_obj *o); + void (*clear_sched)(struct bnx2x_mcast_obj *o); + bool (*check_sched)(struct bnx2x_mcast_obj *o); + + /* Wait until all pending commands complete */ + int (*wait_comp)(struct bnx2x *bp, struct bnx2x_mcast_obj *o); + + /** + * Handle the internal object counters needed for proper + * commands handling. Checks that the provided parameters are + * feasible. + */ + int (*validate)(struct bnx2x *bp, + struct bnx2x_mcast_ramrod_params *p, int cmd); + + /** + * Restore the values of internal counters in case of a failure. + */ + void (*revert)(struct bnx2x *bp, + struct bnx2x_mcast_ramrod_params *p, + int old_num_bins); + + int (*get_registry_size)(struct bnx2x_mcast_obj *o); + void (*set_registry_size)(struct bnx2x_mcast_obj *o, int n); +}; + +/*************************** Credit handling **********************************/ +struct bnx2x_credit_pool_obj { + + /* Current amount of credit in the pool */ + atomic_t credit; + + /* Maximum allowed credit. put() will check against it. */ + int pool_sz; + + /* + * Allocate a pool table statically. + * + * Currently the mamimum allowed size is MAX_MAC_CREDIT_E2(272) + * + * The set bit in the table will mean that the entry is available. + */ +#define BNX2X_POOL_VEC_SIZE (MAX_MAC_CREDIT_E2 / 64) + u64 pool_mirror[BNX2X_POOL_VEC_SIZE]; + + /* Base pool offset (initialized differently */ + int base_pool_offset; + + /** + * Get the next free pool entry. + * + * @return true if there was a free entry in the pool + */ + bool (*get_entry)(struct bnx2x_credit_pool_obj *o, int *entry); + + /** + * Return the entry back to the pool. + * + * @return true if entry is legal and has been successfully + * returned to the pool. + */ + bool (*put_entry)(struct bnx2x_credit_pool_obj *o, int entry); + + /** + * Get the requested amount of credit from the pool. + * + * @param cnt Amount of requested credit + * @return true if the operation is successful + */ + bool (*get)(struct bnx2x_credit_pool_obj *o, int cnt); + + /** + * Returns the credit to the pool. + * + * @param cnt Amount of credit to return + * @return true if the operation is successful + */ + bool (*put)(struct bnx2x_credit_pool_obj *o, int cnt); + + /** + * Reads the current amount of credit. + */ + int (*check)(struct bnx2x_credit_pool_obj *o); +}; + +/*************************** RSS configuration ********************************/ +enum { + /* RSS_MODE bits are mutually exclusive */ + BNX2X_RSS_MODE_DISABLED, + BNX2X_RSS_MODE_REGULAR, + BNX2X_RSS_MODE_VLAN_PRI, + BNX2X_RSS_MODE_E1HOV_PRI, + BNX2X_RSS_MODE_IP_DSCP, + + BNX2X_RSS_SET_SRCH, /* Setup searcher, E1x specific flag */ + + BNX2X_RSS_IPV4, + BNX2X_RSS_IPV4_TCP, + BNX2X_RSS_IPV6, + BNX2X_RSS_IPV6_TCP, +}; + +struct bnx2x_config_rss_params { + struct bnx2x_rss_config_obj *rss_obj; + + /* may have RAMROD_COMP_WAIT set only */ + unsigned long ramrod_flags; + + /* BNX2X_RSS_X bits */ + unsigned long rss_flags; + + /* Number hash bits to take into an account */ + u8 rss_result_mask; + + /* Indirection table */ + u8 ind_table[T_ETH_INDIRECTION_TABLE_SIZE]; + + /* RSS hash values */ + u32 rss_key[10]; + + /* valid only iff BNX2X_RSS_UPDATE_TOE is set */ + u16 toe_rss_bitmap; +}; + +struct bnx2x_rss_config_obj { + struct bnx2x_raw_obj raw; + + /* RSS engine to use */ + u8 engine_id; + + /* Last configured indirection table */ + u8 ind_table[T_ETH_INDIRECTION_TABLE_SIZE]; + + int (*config_rss)(struct bnx2x *bp, + struct bnx2x_config_rss_params *p); +}; + +/*********************** Queue state update ***********************************/ + +/* UPDATE command options */ +enum { + BNX2X_Q_UPDATE_IN_VLAN_REM, + BNX2X_Q_UPDATE_IN_VLAN_REM_CHNG, + BNX2X_Q_UPDATE_OUT_VLAN_REM, + BNX2X_Q_UPDATE_OUT_VLAN_REM_CHNG, + BNX2X_Q_UPDATE_ANTI_SPOOF, + BNX2X_Q_UPDATE_ANTI_SPOOF_CHNG, + BNX2X_Q_UPDATE_ACTIVATE, + BNX2X_Q_UPDATE_ACTIVATE_CHNG, + BNX2X_Q_UPDATE_DEF_VLAN_EN, + BNX2X_Q_UPDATE_DEF_VLAN_EN_CHNG, + BNX2X_Q_UPDATE_SILENT_VLAN_REM_CHNG, + BNX2X_Q_UPDATE_SILENT_VLAN_REM +}; + +/* Allowed Queue states */ +enum bnx2x_q_state { + BNX2X_Q_STATE_RESET, + BNX2X_Q_STATE_INITIALIZED, + BNX2X_Q_STATE_ACTIVE, + BNX2X_Q_STATE_MULTI_COS, + BNX2X_Q_STATE_MCOS_TERMINATED, + BNX2X_Q_STATE_INACTIVE, + BNX2X_Q_STATE_STOPPED, + BNX2X_Q_STATE_TERMINATED, + BNX2X_Q_STATE_FLRED, + BNX2X_Q_STATE_MAX, +}; + +/* Allowed commands */ +enum bnx2x_queue_cmd { + BNX2X_Q_CMD_INIT, + BNX2X_Q_CMD_SETUP, + BNX2X_Q_CMD_SETUP_TX_ONLY, + BNX2X_Q_CMD_DEACTIVATE, + BNX2X_Q_CMD_ACTIVATE, + BNX2X_Q_CMD_UPDATE, + BNX2X_Q_CMD_UPDATE_TPA, + BNX2X_Q_CMD_HALT, + BNX2X_Q_CMD_CFC_DEL, + BNX2X_Q_CMD_TERMINATE, + BNX2X_Q_CMD_EMPTY, + BNX2X_Q_CMD_MAX, +}; + +/* queue SETUP + INIT flags */ +enum { + BNX2X_Q_FLG_TPA, + BNX2X_Q_FLG_TPA_IPV6, + BNX2X_Q_FLG_STATS, + BNX2X_Q_FLG_ZERO_STATS, + BNX2X_Q_FLG_ACTIVE, + BNX2X_Q_FLG_OV, + BNX2X_Q_FLG_VLAN, + BNX2X_Q_FLG_COS, + BNX2X_Q_FLG_HC, + BNX2X_Q_FLG_HC_EN, + BNX2X_Q_FLG_DHC, + BNX2X_Q_FLG_FCOE, + BNX2X_Q_FLG_LEADING_RSS, + BNX2X_Q_FLG_MCAST, + BNX2X_Q_FLG_DEF_VLAN, + BNX2X_Q_FLG_TX_SWITCH, + BNX2X_Q_FLG_TX_SEC, + BNX2X_Q_FLG_ANTI_SPOOF, + BNX2X_Q_FLG_SILENT_VLAN_REM +}; + +/* Queue type options: queue type may be a compination of below. */ +enum bnx2x_q_type { + /** TODO: Consider moving both these flags into the init() + * ramrod params. + */ + BNX2X_Q_TYPE_HAS_RX, + BNX2X_Q_TYPE_HAS_TX, +}; + +#define BNX2X_PRIMARY_CID_INDEX 0 +#define BNX2X_MULTI_TX_COS_E1X 1 +#define BNX2X_MULTI_TX_COS_E2_E3A0 2 +#define BNX2X_MULTI_TX_COS_E3B0 3 +#define BNX2X_MULTI_TX_COS BNX2X_MULTI_TX_COS_E3B0 + + +struct bnx2x_queue_init_params { + struct { + unsigned long flags; + u16 hc_rate; + u8 fw_sb_id; + u8 sb_cq_index; + } tx; + + struct { + unsigned long flags; + u16 hc_rate; + u8 fw_sb_id; + u8 sb_cq_index; + } rx; + + /* CID context in the host memory */ + struct eth_context *cxts[BNX2X_MULTI_TX_COS]; + + /* maximum number of cos supported by hardware */ + u8 max_cos; +}; + +struct bnx2x_queue_terminate_params { + /* index within the tx_only cids of this queue object */ + u8 cid_index; +}; + +struct bnx2x_queue_cfc_del_params { + /* index within the tx_only cids of this queue object */ + u8 cid_index; +}; + +struct bnx2x_queue_update_params { + unsigned long update_flags; /* BNX2X_Q_UPDATE_XX bits */ + u16 def_vlan; + u16 silent_removal_value; + u16 silent_removal_mask; +/* index within the tx_only cids of this queue object */ + u8 cid_index; +}; + +struct rxq_pause_params { + u16 bd_th_lo; + u16 bd_th_hi; + u16 rcq_th_lo; + u16 rcq_th_hi; + u16 sge_th_lo; /* valid iff BNX2X_Q_FLG_TPA */ + u16 sge_th_hi; /* valid iff BNX2X_Q_FLG_TPA */ + u16 pri_map; +}; + +/* general */ +struct bnx2x_general_setup_params { + /* valid iff BNX2X_Q_FLG_STATS */ + u8 stat_id; + + u8 spcl_id; + u16 mtu; + u8 cos; +}; + +struct bnx2x_rxq_setup_params { + /* dma */ + dma_addr_t dscr_map; + dma_addr_t sge_map; + dma_addr_t rcq_map; + dma_addr_t rcq_np_map; + + u16 drop_flags; + u16 buf_sz; + u8 fw_sb_id; + u8 cl_qzone_id; + + /* valid iff BNX2X_Q_FLG_TPA */ + u16 tpa_agg_sz; + u16 sge_buf_sz; + u8 max_sges_pkt; + u8 max_tpa_queues; + u8 rss_engine_id; + + u8 cache_line_log; + + u8 sb_cq_index; + + /* valid iff BXN2X_Q_FLG_SILENT_VLAN_REM */ + u16 silent_removal_value; + u16 silent_removal_mask; +}; + +struct bnx2x_txq_setup_params { + /* dma */ + dma_addr_t dscr_map; + + u8 fw_sb_id; + u8 sb_cq_index; + u8 cos; /* valid iff BNX2X_Q_FLG_COS */ + u16 traffic_type; + /* equals to the leading rss client id, used for TX classification*/ + u8 tss_leading_cl_id; + + /* valid iff BNX2X_Q_FLG_DEF_VLAN */ + u16 default_vlan; +}; + +struct bnx2x_queue_setup_params { + struct bnx2x_general_setup_params gen_params; + struct bnx2x_txq_setup_params txq_params; + struct bnx2x_rxq_setup_params rxq_params; + struct rxq_pause_params pause_params; + unsigned long flags; +}; + +struct bnx2x_queue_setup_tx_only_params { + struct bnx2x_general_setup_params gen_params; + struct bnx2x_txq_setup_params txq_params; + unsigned long flags; + /* index within the tx_only cids of this queue object */ + u8 cid_index; +}; + +struct bnx2x_queue_state_params { + struct bnx2x_queue_sp_obj *q_obj; + + /* Current command */ + enum bnx2x_queue_cmd cmd; + + /* may have RAMROD_COMP_WAIT set only */ + unsigned long ramrod_flags; + + /* Params according to the current command */ + union { + struct bnx2x_queue_update_params update; + struct bnx2x_queue_setup_params setup; + struct bnx2x_queue_init_params init; + struct bnx2x_queue_setup_tx_only_params tx_only; + struct bnx2x_queue_terminate_params terminate; + struct bnx2x_queue_cfc_del_params cfc_del; + } params; +}; + +struct bnx2x_queue_sp_obj { + u32 cids[BNX2X_MULTI_TX_COS]; + u8 cl_id; + u8 func_id; + + /* + * number of traffic classes supported by queue. + * The primary connection of the queue suppotrs the first traffic + * class. Any further traffic class is suppoted by a tx-only + * connection. + * + * Therefore max_cos is also a number of valid entries in the cids + * array. + */ + u8 max_cos; + u8 num_tx_only, next_tx_only; + + enum bnx2x_q_state state, next_state; + + /* bits from enum bnx2x_q_type */ + unsigned long type; + + /* BNX2X_Q_CMD_XX bits. This object implements "one + * pending" paradigm but for debug and tracing purposes it's + * more convinient to have different bits for different + * commands. + */ + unsigned long pending; + + /* Buffer to use as a ramrod data and its mapping */ + void *rdata; + dma_addr_t rdata_mapping; + + /** + * Performs one state change according to the given parameters. + * + * @return 0 in case of success and negative value otherwise. + */ + int (*send_cmd)(struct bnx2x *bp, + struct bnx2x_queue_state_params *params); + + /** + * Sets the pending bit according to the requested transition. + */ + int (*set_pending)(struct bnx2x_queue_sp_obj *o, + struct bnx2x_queue_state_params *params); + + /** + * Checks that the requested state transition is legal. + */ + int (*check_transition)(struct bnx2x *bp, + struct bnx2x_queue_sp_obj *o, + struct bnx2x_queue_state_params *params); + + /** + * Completes the pending command. + */ + int (*complete_cmd)(struct bnx2x *bp, + struct bnx2x_queue_sp_obj *o, + enum bnx2x_queue_cmd); + + int (*wait_comp)(struct bnx2x *bp, + struct bnx2x_queue_sp_obj *o, + enum bnx2x_queue_cmd cmd); +}; + +/********************** Function state update *********************************/ +/* Allowed Function states */ +enum bnx2x_func_state { + BNX2X_F_STATE_RESET, + BNX2X_F_STATE_INITIALIZED, + BNX2X_F_STATE_STARTED, + BNX2X_F_STATE_TX_STOPPED, + BNX2X_F_STATE_MAX, +}; + +/* Allowed Function commands */ +enum bnx2x_func_cmd { + BNX2X_F_CMD_HW_INIT, + BNX2X_F_CMD_START, + BNX2X_F_CMD_STOP, + BNX2X_F_CMD_HW_RESET, + BNX2X_F_CMD_TX_STOP, + BNX2X_F_CMD_TX_START, + BNX2X_F_CMD_MAX, +}; + +struct bnx2x_func_hw_init_params { + /* A load phase returned by MCP. + * + * May be: + * FW_MSG_CODE_DRV_LOAD_COMMON_CHIP + * FW_MSG_CODE_DRV_LOAD_COMMON + * FW_MSG_CODE_DRV_LOAD_PORT + * FW_MSG_CODE_DRV_LOAD_FUNCTION + */ + u32 load_phase; +}; + +struct bnx2x_func_hw_reset_params { + /* A load phase returned by MCP. + * + * May be: + * FW_MSG_CODE_DRV_LOAD_COMMON_CHIP + * FW_MSG_CODE_DRV_LOAD_COMMON + * FW_MSG_CODE_DRV_LOAD_PORT + * FW_MSG_CODE_DRV_LOAD_FUNCTION + */ + u32 reset_phase; +}; + +struct bnx2x_func_start_params { + /* Multi Function mode: + * - Single Function + * - Switch Dependent + * - Switch Independent + */ + u16 mf_mode; + + /* Switch Dependent mode outer VLAN tag */ + u16 sd_vlan_tag; + + /* Function cos mode */ + u8 network_cos_mode; +}; + +struct bnx2x_func_tx_start_params { + struct priority_cos traffic_type_to_priority_cos[MAX_TRAFFIC_TYPES]; + u8 dcb_enabled; + u8 dcb_version; + u8 dont_add_pri_0_en; +}; + +struct bnx2x_func_state_params { + struct bnx2x_func_sp_obj *f_obj; + + /* Current command */ + enum bnx2x_func_cmd cmd; + + /* may have RAMROD_COMP_WAIT set only */ + unsigned long ramrod_flags; + + /* Params according to the current command */ + union { + struct bnx2x_func_hw_init_params hw_init; + struct bnx2x_func_hw_reset_params hw_reset; + struct bnx2x_func_start_params start; + struct bnx2x_func_tx_start_params tx_start; + } params; +}; + +struct bnx2x_func_sp_drv_ops { + /* Init tool + runtime initialization: + * - Common Chip + * - Common (per Path) + * - Port + * - Function phases + */ + int (*init_hw_cmn_chip)(struct bnx2x *bp); + int (*init_hw_cmn)(struct bnx2x *bp); + int (*init_hw_port)(struct bnx2x *bp); + int (*init_hw_func)(struct bnx2x *bp); + + /* Reset Function HW: Common, Port, Function phases. */ + void (*reset_hw_cmn)(struct bnx2x *bp); + void (*reset_hw_port)(struct bnx2x *bp); + void (*reset_hw_func)(struct bnx2x *bp); + + /* Init/Free GUNZIP resources */ + int (*gunzip_init)(struct bnx2x *bp); + void (*gunzip_end)(struct bnx2x *bp); + + /* Prepare/Release FW resources */ + int (*init_fw)(struct bnx2x *bp); + void (*release_fw)(struct bnx2x *bp); +}; + +struct bnx2x_func_sp_obj { + enum bnx2x_func_state state, next_state; + + /* BNX2X_FUNC_CMD_XX bits. This object implements "one + * pending" paradigm but for debug and tracing purposes it's + * more convinient to have different bits for different + * commands. + */ + unsigned long pending; + + /* Buffer to use as a ramrod data and its mapping */ + void *rdata; + dma_addr_t rdata_mapping; + + /* this mutex validates that when pending flag is taken, the next + * ramrod to be sent will be the one set the pending bit + */ + struct mutex one_pending_mutex; + + /* Driver interface */ + struct bnx2x_func_sp_drv_ops *drv; + + /** + * Performs one state change according to the given parameters. + * + * @return 0 in case of success and negative value otherwise. + */ + int (*send_cmd)(struct bnx2x *bp, + struct bnx2x_func_state_params *params); + + /** + * Checks that the requested state transition is legal. + */ + int (*check_transition)(struct bnx2x *bp, + struct bnx2x_func_sp_obj *o, + struct bnx2x_func_state_params *params); + + /** + * Completes the pending command. + */ + int (*complete_cmd)(struct bnx2x *bp, + struct bnx2x_func_sp_obj *o, + enum bnx2x_func_cmd cmd); + + int (*wait_comp)(struct bnx2x *bp, struct bnx2x_func_sp_obj *o, + enum bnx2x_func_cmd cmd); +}; + +/********************** Interfaces ********************************************/ +/* Queueable objects set */ +union bnx2x_qable_obj { + struct bnx2x_vlan_mac_obj vlan_mac; +}; +/************** Function state update *********/ +void bnx2x_init_func_obj(struct bnx2x *bp, + struct bnx2x_func_sp_obj *obj, + void *rdata, dma_addr_t rdata_mapping, + struct bnx2x_func_sp_drv_ops *drv_iface); + +int bnx2x_func_state_change(struct bnx2x *bp, + struct bnx2x_func_state_params *params); + +enum bnx2x_func_state bnx2x_func_get_state(struct bnx2x *bp, + struct bnx2x_func_sp_obj *o); +/******************* Queue State **************/ +void bnx2x_init_queue_obj(struct bnx2x *bp, + struct bnx2x_queue_sp_obj *obj, u8 cl_id, u32 *cids, + u8 cid_cnt, u8 func_id, void *rdata, + dma_addr_t rdata_mapping, unsigned long type); + +int bnx2x_queue_state_change(struct bnx2x *bp, + struct bnx2x_queue_state_params *params); + +/********************* VLAN-MAC ****************/ +void bnx2x_init_mac_obj(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *mac_obj, + u8 cl_id, u32 cid, u8 func_id, void *rdata, + dma_addr_t rdata_mapping, int state, + unsigned long *pstate, bnx2x_obj_type type, + struct bnx2x_credit_pool_obj *macs_pool); + +void bnx2x_init_vlan_obj(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *vlan_obj, + u8 cl_id, u32 cid, u8 func_id, void *rdata, + dma_addr_t rdata_mapping, int state, + unsigned long *pstate, bnx2x_obj_type type, + struct bnx2x_credit_pool_obj *vlans_pool); + +void bnx2x_init_vlan_mac_obj(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *vlan_mac_obj, + u8 cl_id, u32 cid, u8 func_id, void *rdata, + dma_addr_t rdata_mapping, int state, + unsigned long *pstate, bnx2x_obj_type type, + struct bnx2x_credit_pool_obj *macs_pool, + struct bnx2x_credit_pool_obj *vlans_pool); + +int bnx2x_config_vlan_mac(struct bnx2x *bp, + struct bnx2x_vlan_mac_ramrod_params *p); + +int bnx2x_vlan_mac_move(struct bnx2x *bp, + struct bnx2x_vlan_mac_ramrod_params *p, + struct bnx2x_vlan_mac_obj *dest_o); + +/********************* RX MODE ****************/ + +void bnx2x_init_rx_mode_obj(struct bnx2x *bp, + struct bnx2x_rx_mode_obj *o); + +/** + * Send and RX_MODE ramrod according to the provided parameters. + * + * @param bp + * @param p Command parameters + * + * @return 0 - if operation was successfull and there is no pending completions, + * positive number - if there are pending completions, + * negative - if there were errors + */ +int bnx2x_config_rx_mode(struct bnx2x *bp, + struct bnx2x_rx_mode_ramrod_params *p); + +/****************** MULTICASTS ****************/ + +void bnx2x_init_mcast_obj(struct bnx2x *bp, + struct bnx2x_mcast_obj *mcast_obj, + u8 mcast_cl_id, u32 mcast_cid, u8 func_id, + u8 engine_id, void *rdata, dma_addr_t rdata_mapping, + int state, unsigned long *pstate, + bnx2x_obj_type type); + +/** + * Configure multicast MACs list. May configure a new list + * provided in p->mcast_list (BNX2X_MCAST_CMD_ADD), clean up + * (BNX2X_MCAST_CMD_DEL) or restore (BNX2X_MCAST_CMD_RESTORE) a current + * configuration, continue to execute the pending commands + * (BNX2X_MCAST_CMD_CONT). + * + * If previous command is still pending or if number of MACs to + * configure is more that maximum number of MACs in one command, + * the current command will be enqueued to the tail of the + * pending commands list. + * + * @param bp + * @param p + * @param command to execute: BNX2X_MCAST_CMD_X + * + * @return 0 is operation was sucessfull and there are no pending completions, + * negative if there were errors, positive if there are pending + * completions. + */ +int bnx2x_config_mcast(struct bnx2x *bp, + struct bnx2x_mcast_ramrod_params *p, int cmd); + +/****************** CREDIT POOL ****************/ +void bnx2x_init_mac_credit_pool(struct bnx2x *bp, + struct bnx2x_credit_pool_obj *p, u8 func_id, + u8 func_num); +void bnx2x_init_vlan_credit_pool(struct bnx2x *bp, + struct bnx2x_credit_pool_obj *p, u8 func_id, + u8 func_num); + + +/****************** RSS CONFIGURATION ****************/ +void bnx2x_init_rss_config_obj(struct bnx2x *bp, + struct bnx2x_rss_config_obj *rss_obj, + u8 cl_id, u32 cid, u8 func_id, u8 engine_id, + void *rdata, dma_addr_t rdata_mapping, + int state, unsigned long *pstate, + bnx2x_obj_type type); + +/** + * Updates RSS configuration according to provided parameters. + * + * @param bp + * @param p + * + * @return 0 in case of success + */ +int bnx2x_config_rss(struct bnx2x *bp, + struct bnx2x_config_rss_params *p); + +/** + * Return the current ind_table configuration. + * + * @param bp + * @param ind_table buffer to fill with the current indirection + * table content. Should be at least + * T_ETH_INDIRECTION_TABLE_SIZE bytes long. + */ +void bnx2x_get_rss_ind_table(struct bnx2x_rss_config_obj *rss_obj, + u8 *ind_table); + +#endif /* BNX2X_SP_VERBS */ |