diff options
Diffstat (limited to 'drivers/net/e1000e')
| -rw-r--r-- | drivers/net/e1000e/82571.c | 163 | ||||
| -rw-r--r-- | drivers/net/e1000e/Makefile | 2 | ||||
| -rw-r--r-- | drivers/net/e1000e/defines.h | 109 | ||||
| -rw-r--r-- | drivers/net/e1000e/e1000.h | 37 | ||||
| -rw-r--r-- | drivers/net/e1000e/es2lan.c | 137 | ||||
| -rw-r--r-- | drivers/net/e1000e/ethtool.c | 282 | ||||
| -rw-r--r-- | drivers/net/e1000e/hw.h | 173 | ||||
| -rw-r--r-- | drivers/net/e1000e/ich8lan.c | 309 | ||||
| -rw-r--r-- | drivers/net/e1000e/lib.c | 348 | ||||
| -rw-r--r-- | drivers/net/e1000e/netdev.c | 645 | ||||
| -rw-r--r-- | drivers/net/e1000e/param.c | 33 | ||||
| -rw-r--r-- | drivers/net/e1000e/phy.c | 164 |
12 files changed, 1380 insertions, 1022 deletions
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index 7fe20310eb5..01c88664bad 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2007 Intel Corporation. + Copyright(c) 1999 - 2008 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -29,6 +29,9 @@ /* * 82571EB Gigabit Ethernet Controller * 82571EB Gigabit Ethernet Controller (Fiber) + * 82571EB Dual Port Gigabit Mezzanine Adapter + * 82571EB Quad Port Gigabit Mezzanine Adapter + * 82571PT Gigabit PT Quad Port Server ExpressModule * 82572EI Gigabit Ethernet Controller (Copper) * 82572EI Gigabit Ethernet Controller (Fiber) * 82572EI Gigabit Ethernet Controller @@ -72,7 +75,7 @@ static s32 e1000_init_phy_params_82571(struct e1000_hw *hw) struct e1000_phy_info *phy = &hw->phy; s32 ret_val; - if (hw->media_type != e1000_media_type_copper) { + if (hw->phy.media_type != e1000_media_type_copper) { phy->type = e1000_phy_none; return 0; } @@ -150,7 +153,8 @@ static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw) if (((eecd >> 15) & 0x3) == 0x3) { nvm->type = e1000_nvm_flash_hw; nvm->word_size = 2048; - /* Autonomous Flash update bit must be cleared due + /* + * Autonomous Flash update bit must be cleared due * to Flash update issue. */ eecd &= ~E1000_EECD_AUPDEN; @@ -159,13 +163,18 @@ static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw) } /* Fall Through */ default: - nvm->type = e1000_nvm_eeprom_spi; + nvm->type = e1000_nvm_eeprom_spi; size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >> E1000_EECD_SIZE_EX_SHIFT); - /* Added to a constant, "size" becomes the left-shift value + /* + * Added to a constant, "size" becomes the left-shift value * for setting word_size. */ size += NVM_WORD_SIZE_BASE_SHIFT; + + /* EEPROM access above 16k is unsupported */ + if (size > 14) + size = 14; nvm->word_size = 1 << size; break; } @@ -190,16 +199,16 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter) case E1000_DEV_ID_82571EB_FIBER: case E1000_DEV_ID_82572EI_FIBER: case E1000_DEV_ID_82571EB_QUAD_FIBER: - hw->media_type = e1000_media_type_fiber; + hw->phy.media_type = e1000_media_type_fiber; break; case E1000_DEV_ID_82571EB_SERDES: case E1000_DEV_ID_82572EI_SERDES: case E1000_DEV_ID_82571EB_SERDES_DUAL: case E1000_DEV_ID_82571EB_SERDES_QUAD: - hw->media_type = e1000_media_type_internal_serdes; + hw->phy.media_type = e1000_media_type_internal_serdes; break; default: - hw->media_type = e1000_media_type_copper; + hw->phy.media_type = e1000_media_type_copper; break; } @@ -208,25 +217,28 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter) /* Set rar entry count */ mac->rar_entry_count = E1000_RAR_ENTRIES; /* Set if manageability features are enabled. */ - mac->arc_subsystem_valid = - (er32(FWSM) & E1000_FWSM_MODE_MASK) ? 1 : 0; + mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK) ? 1 : 0; /* check for link */ - switch (hw->media_type) { + switch (hw->phy.media_type) { case e1000_media_type_copper: func->setup_physical_interface = e1000_setup_copper_link_82571; func->check_for_link = e1000e_check_for_copper_link; func->get_link_up_info = e1000e_get_speed_and_duplex_copper; break; case e1000_media_type_fiber: - func->setup_physical_interface = e1000_setup_fiber_serdes_link_82571; + func->setup_physical_interface = + e1000_setup_fiber_serdes_link_82571; func->check_for_link = e1000e_check_for_fiber_link; - func->get_link_up_info = e1000e_get_speed_and_duplex_fiber_serdes; + func->get_link_up_info = + e1000e_get_speed_and_duplex_fiber_serdes; break; case e1000_media_type_internal_serdes: - func->setup_physical_interface = e1000_setup_fiber_serdes_link_82571; + func->setup_physical_interface = + e1000_setup_fiber_serdes_link_82571; func->check_for_link = e1000e_check_for_serdes_link; - func->get_link_up_info = e1000e_get_speed_and_duplex_fiber_serdes; + func->get_link_up_info = + e1000e_get_speed_and_duplex_fiber_serdes; break; default: return -E1000_ERR_CONFIG; @@ -236,7 +248,7 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter) return 0; } -static s32 e1000_get_invariants_82571(struct e1000_adapter *adapter) +static s32 e1000_get_variants_82571(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; static int global_quad_port_a; /* global port a indication */ @@ -322,10 +334,12 @@ static s32 e1000_get_phy_id_82571(struct e1000_hw *hw) switch (hw->mac.type) { case e1000_82571: case e1000_82572: - /* The 82571 firmware may still be configuring the PHY. + /* + * The 82571 firmware may still be configuring the PHY. * In this case, we cannot access the PHY until the * configuration is done. So we explicitly set the - * PHY ID. */ + * PHY ID. + */ phy->id = IGP01E1000_I_PHY_ID; break; case e1000_82573: @@ -479,8 +493,10 @@ static s32 e1000_update_nvm_checksum_82571(struct e1000_hw *hw) if (ret_val) return ret_val; - /* If our nvm is an EEPROM, then we're done - * otherwise, commit the checksum to the flash NVM. */ + /* + * If our nvm is an EEPROM, then we're done + * otherwise, commit the checksum to the flash NVM. + */ if (hw->nvm.type != e1000_nvm_flash_hw) return ret_val; @@ -496,7 +512,8 @@ static s32 e1000_update_nvm_checksum_82571(struct e1000_hw *hw) /* Reset the firmware if using STM opcode. */ if ((er32(FLOP) & 0xFF00) == E1000_STM_OPCODE) { - /* The enabling of and the actual reset must be done + /* + * The enabling of and the actual reset must be done * in two write cycles. */ ew32(HICR, E1000_HICR_FW_RESET_ENABLE); @@ -557,8 +574,10 @@ static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset, u32 eewr = 0; s32 ret_val = 0; - /* A check for invalid values: offset too large, too many words, - * and not enough words. */ + /* + * A check for invalid values: offset too large, too many words, + * and not enough words. + */ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || (words == 0)) { hw_dbg(hw, "nvm parameter(s) out of bounds\n"); @@ -645,30 +664,32 @@ static s32 e1000_set_d0_lplu_state_82571(struct e1000_hw *hw, bool active) } else { data &= ~IGP02E1000_PM_D0_LPLU; ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data); - /* LPLU and SmartSpeed are mutually exclusive. LPLU is used + /* + * LPLU and SmartSpeed are mutually exclusive. LPLU is used * during Dx states where the power conservation is most * important. During driver activity we should enable - * SmartSpeed, so performance is maintained. */ + * SmartSpeed, so performance is maintained. + */ if (phy->smart_speed == e1000_smart_speed_on) { ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, - &data); + &data); if (ret_val) return ret_val; data |= IGP01E1000_PSCFR_SMART_SPEED; ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, - data); + data); if (ret_val) return ret_val; } else if (phy->smart_speed == e1000_smart_speed_off) { ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, - &data); + &data); if (ret_val) return ret_val; data &= ~IGP01E1000_PSCFR_SMART_SPEED; ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, - data); + data); if (ret_val) return ret_val; } @@ -693,7 +714,8 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw) s32 ret_val; u16 i = 0; - /* Prevent the PCI-E bus from sticking if there is no TLP connection + /* + * Prevent the PCI-E bus from sticking if there is no TLP connection * on the last TLP read/write transaction when MAC is reset. */ ret_val = e1000e_disable_pcie_master(hw); @@ -709,8 +731,10 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw) msleep(10); - /* Must acquire the MDIO ownership before MAC reset. - * Ownership defaults to firmware after a reset. */ + /* + * Must acquire the MDIO ownership before MAC reset. + * Ownership defaults to firmware after a reset. + */ if (hw->mac.type == e1000_82573) { extcnf_ctrl = er32(EXTCNF_CTRL); extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP; @@ -747,7 +771,8 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw) /* We don't want to continue accessing MAC registers. */ return ret_val; - /* Phy configuration from NVM just starts after EECD_AUTO_RD is set. + /* + * Phy configuration from NVM just starts after EECD_AUTO_RD is set. * Need to wait for Phy configuration completion before accessing * NVM and Phy. */ @@ -793,7 +818,8 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw) e1000e_clear_vfta(hw); /* Setup the receive address. */ - /* If, however, a locally administered address was assigned to the + /* + * If, however, a locally administered address was assigned to the * 82571, we must reserve a RAR for it to work around an issue where * resetting one port will reload the MAC on the other port. */ @@ -810,19 +836,19 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw) ret_val = e1000_setup_link_82571(hw); /* Set the transmit descriptor write-back policy */ - reg_data = er32(TXDCTL); + reg_data = er32(TXDCTL(0)); reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB | E1000_TXDCTL_COUNT_DESC; - ew32(TXDCTL, reg_data); + ew32(TXDCTL(0), reg_data); /* ...for both queues. */ if (mac->type != e1000_82573) { - reg_data = er32(TXDCTL1); + reg_data = er32(TXDCTL(1)); reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB | E1000_TXDCTL_COUNT_DESC; - ew32(TXDCTL1, reg_data); + ew32(TXDCTL(1), reg_data); } else { e1000e_enable_tx_pkt_filtering(hw); reg_data = er32(GCR); @@ -830,7 +856,8 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw) ew32(GCR, reg_data); } - /* Clear all of the statistics registers (clear on read). It is + /* + * Clear all of the statistics registers (clear on read). It is * important that we do this after we have tried to establish link * because the symbol error count will increment wildly if there * is no link. @@ -851,17 +878,17 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw) u32 reg; /* Transmit Descriptor Control 0 */ - reg = er32(TXDCTL); + reg = er32(TXDCTL(0)); reg |= (1 << 22); - ew32(TXDCTL, reg); + ew32(TXDCTL(0), reg); /* Transmit Descriptor Control 1 */ - reg = er32(TXDCTL1); + reg = er32(TXDCTL(1)); reg |= (1 << 22); - ew32(TXDCTL1, reg); + ew32(TXDCTL(1), reg); /* Transmit Arbitration Control 0 */ - reg = er32(TARC0); + reg = er32(TARC(0)); reg &= ~(0xF << 27); /* 30:27 */ switch (hw->mac.type) { case e1000_82571: @@ -871,10 +898,10 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw) default: break; } - ew32(TARC0, reg); + ew32(TARC(0), reg); /* Transmit Arbitration Control 1 */ - reg = er32(TARC1); + reg = er32(TARC(1)); switch (hw->mac.type) { case e1000_82571: case e1000_82572: @@ -884,7 +911,7 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw) reg &= ~(1 << 28); else reg |= (1 << 28); - ew32(TARC1, reg); + ew32(TARC(1), reg); break; default: break; @@ -922,7 +949,8 @@ void e1000e_clear_vfta(struct e1000_hw *hw) if (hw->mac.type == e1000_82573) { if (hw->mng_cookie.vlan_id != 0) { - /* The VFTA is a 4096b bit-field, each identifying + /* + * The VFTA is a 4096b bit-field, each identifying * a single VLAN ID. The following operations * determine which 32b entry (i.e. offset) into the * array we want to set the VLAN ID (i.e. bit) of @@ -936,7 +964,8 @@ void e1000e_clear_vfta(struct e1000_hw *hw) } } for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) { - /* If the offset we want to clear is the same offset of the + /* + * If the offset we want to clear is the same offset of the * manageability VLAN ID, then clear all bits except that of * the manageability unit. */ @@ -947,7 +976,7 @@ void e1000e_clear_vfta(struct e1000_hw *hw) } /** - * e1000_mc_addr_list_update_82571 - Update Multicast addresses + * e1000_update_mc_addr_list_82571 - Update Multicast addresses * @hw: pointer to the HW structure * @mc_addr_list: array of multicast addresses to program * @mc_addr_count: number of multicast addresses to program @@ -959,7 +988,7 @@ void e1000e_clear_vfta(struct e1000_hw *hw) * The parameter rar_count will usually be hw->mac.rar_entry_count * unless there are workarounds that change this. **/ -static void e1000_mc_addr_list_update_82571(struct e1000_hw *hw, +static void e1000_update_mc_addr_list_82571(struct e1000_hw *hw, u8 *mc_addr_list, u32 mc_addr_count, u32 rar_used_count, @@ -968,8 +997,8 @@ static void e1000_mc_addr_list_update_82571(struct e1000_hw *hw, if (e1000e_get_laa_state_82571(hw)) rar_count--; - e1000e_mc_addr_list_update_generic(hw, mc_addr_list, mc_addr_count, - rar_used_count, rar_count); + e1000e_update_mc_addr_list_generic(hw, mc_addr_list, mc_addr_count, + rar_used_count, rar_count); } /** @@ -984,12 +1013,13 @@ static void e1000_mc_addr_list_update_82571(struct e1000_hw *hw, **/ static s32 e1000_setup_link_82571(struct e1000_hw *hw) { - /* 82573 does not have a word in the NVM to determine + /* + * 82573 does not have a word in the NVM to determine * the default flow control setting, so we explicitly * set it to full. */ if (hw->mac.type == e1000_82573) - hw->mac.fc = e1000_fc_full; + hw->fc.type = e1000_fc_full; return e1000e_setup_link(hw); } @@ -1050,14 +1080,14 @@ static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw) switch (hw->mac.type) { case e1000_82571: case e1000_82572: - /* If SerDes loopback mode is entered, there is no form + /* + * If SerDes loopback mode is entered, there is no form * of reset to take the adapter out of that mode. So we * have to explicitly take the adapter out of loopback * mode. This prevents drivers from twiddling their thumbs * if another tool failed to take it out of loopback mode. */ - ew32(SCTL, - E1000_SCTL_DISABLE_SERDES_LOOPBACK); + ew32(SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK); break; default: break; @@ -1124,7 +1154,8 @@ void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state) /* If workaround is activated... */ if (state) - /* Hold a copy of the LAA in RAR[14] This is done so that + /* + * Hold a copy of the LAA in RAR[14] This is done so that * between the time RAR[0] gets clobbered and the time it * gets fixed, the actual LAA is in one of the RARs and no * incoming packets directed to this port are dropped. @@ -1152,7 +1183,8 @@ static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw) if (nvm->type != e1000_nvm_flash_hw) return 0; - /* Check bit 4 of word 10h. If it is 0, firmware is done updating + /* + * Check bit 4 of word 10h. If it is 0, firmware is done updating * 10h-12h. Checksum may need to be fixed. */ ret_val = e1000_read_nvm(hw, 0x10, 1, &data); @@ -1160,7 +1192,8 @@ static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw) return ret_val; if (!(data & 0x10)) { - /* Read 0x23 and check bit 15. This bit is a 1 + /* + * Read 0x23 and check bit 15. This bit is a 1 * when the checksum has already been fixed. If * the checksum is still wrong and this bit is a * 1, we need to return bad checksum. Otherwise, @@ -1240,7 +1273,7 @@ static struct e1000_mac_operations e82571_mac_ops = { /* .get_link_up_info: media type dependent */ .led_on = e1000e_led_on_generic, .led_off = e1000e_led_off_generic, - .mc_addr_list_update = e1000_mc_addr_list_update_82571, + .update_mc_addr_list = e1000_update_mc_addr_list_82571, .reset_hw = e1000_reset_hw_82571, .init_hw = e1000_init_hw_82571, .setup_link = e1000_setup_link_82571, @@ -1304,7 +1337,7 @@ struct e1000_info e1000_82571_info = { | FLAG_TARC_SPEED_MODE_BIT /* errata */ | FLAG_APME_CHECK_PORT_B, .pba = 38, - .get_invariants = e1000_get_invariants_82571, + .get_variants = e1000_get_variants_82571, .mac_ops = &e82571_mac_ops, .phy_ops = &e82_phy_ops_igp, .nvm_ops = &e82571_nvm_ops, @@ -1322,7 +1355,7 @@ struct e1000_info e1000_82572_info = { | FLAG_HAS_STATS_ICR_ICT | FLAG_TARC_SPEED_MODE_BIT, /* errata */ .pba = 38, - .get_invariants = e1000_get_invariants_82571, + .get_variants = e1000_get_variants_82571, .mac_ops = &e82571_mac_ops, .phy_ops = &e82_phy_ops_igp, .nvm_ops = &e82571_nvm_ops, @@ -1342,7 +1375,7 @@ struct e1000_info e1000_82573_info = { | FLAG_HAS_ERT | FLAG_HAS_SWSM_ON_LOAD, .pba = 20, - .get_invariants = e1000_get_invariants_82571, + .get_variants = e1000_get_variants_82571, .mac_ops = &e82571_mac_ops, .phy_ops = &e82_phy_ops_m88, .nvm_ops = &e82571_nvm_ops, diff --git a/drivers/net/e1000e/Makefile b/drivers/net/e1000e/Makefile index 650f866e7ac..360c91369f3 100644 --- a/drivers/net/e1000e/Makefile +++ b/drivers/net/e1000e/Makefile @@ -1,7 +1,7 @@ ################################################################################ # # Intel PRO/1000 Linux driver -# Copyright(c) 1999 - 2007 Intel Corporation. +# Copyright(c) 1999 - 2008 Intel Corporation. # # This program is free software; you can redistribute it and/or modify it # under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h index a4f511f549f..572cfd44397 100644 --- a/drivers/net/e1000e/defines.h +++ b/drivers/net/e1000e/defines.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2007 Intel Corporation. + Copyright(c) 1999 - 2008 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -120,10 +120,10 @@ #define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */ #define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */ #define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */ -#define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000 /* Enable MAC address - * filtering */ -#define E1000_MANC_EN_MNG2HOST 0x00200000 /* Enable MNG packets to host - * memory */ +/* Enable MAC address filtering */ +#define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000 +/* Enable MNG packets to host memory */ +#define E1000_MANC_EN_MNG2HOST 0x00200000 /* Receive Control */ #define E1000_RCTL_EN 0x00000002 /* enable */ @@ -135,25 +135,26 @@ #define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */ #define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */ #define E1000_RCTL_DTYP_PS 0x00000400 /* Packet Split descriptor */ -#define E1000_RCTL_RDMTS_HALF 0x00000000 /* rx desc min threshold size */ +#define E1000_RCTL_RDMTS_HALF 0x00000000 /* Rx desc min threshold size */ #define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */ #define E1000_RCTL_BAM 0x00008000 /* broadcast enable */ /* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */ -#define E1000_RCTL_SZ_2048 0x00000000 /* rx buffer size 2048 */ -#define E1000_RCTL_SZ_1024 0x00010000 /* rx buffer size 1024 */ -#define E1000_RCTL_SZ_512 0x00020000 /* rx buffer size 512 */ -#define E1000_RCTL_SZ_256 0x00030000 /* rx buffer size 256 */ +#define E1000_RCTL_SZ_2048 0x00000000 /* Rx buffer size 2048 */ +#define E1000_RCTL_SZ_1024 0x00010000 /* Rx buffer size 1024 */ +#define E1000_RCTL_SZ_512 0x00020000 /* Rx buffer size 512 */ +#define E1000_RCTL_SZ_256 0x00030000 /* Rx buffer size 256 */ /* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */ -#define E1000_RCTL_SZ_16384 0x00010000 /* rx buffer size 16384 */ -#define E1000_RCTL_SZ_8192 0x00020000 /* rx buffer size 8192 */ -#define E1000_RCTL_SZ_4096 0x00030000 /* rx buffer size 4096 */ +#define E1000_RCTL_SZ_16384 0x00010000 /* Rx buffer size 16384 */ +#define E1000_RCTL_SZ_8192 0x00020000 /* Rx buffer size 8192 */ +#define E1000_RCTL_SZ_4096 0x00030000 /* Rx buffer size 4096 */ #define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */ #define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */ #define E1000_RCTL_CFI 0x00100000 /* canonical form indicator */ #define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */ #define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */ -/* Use byte values for the following shift parameters +/* + * Use byte values for the following shift parameters * Usage: * psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) & * E1000_PSRCTL_BSIZE0_MASK) | @@ -206,7 +207,8 @@ #define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */ #define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */ -/* Bit definitions for the Management Data IO (MDIO) and Management Data +/* + * Bit definitions for the Management Data IO (MDIO) and Management Data * Clock (MDC) pins in the Device Control Register. */ @@ -279,7 +281,7 @@ #define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */ /* Transmit Control */ -#define E1000_TCTL_EN 0x00000002 /* enable tx */ +#define E1000_TCTL_EN 0x00000002 /* enable Tx */ #define E1000_TCTL_PSP 0x00000008 /* pad short packets */ #define E1000_TCTL_CT 0x00000ff0 /* collision threshold */ #define E1000_TCTL_COLD 0x003ff000 /* collision distance */ @@ -337,8 +339,8 @@ #define E1000_KABGTXD_BGSQLBIAS 0x00050000 /* PBA constants */ -#define E1000_PBA_8K 0x0008 /* 8KB, default Rx allocation */ -#define E1000_PBA_16K 0x0010 /* 16KB, default TX allocation */ +#define E1000_PBA_8K 0x0008 /* 8KB */ +#define E1000_PBA_16K 0x0010 /* 16KB */ #define E1000_PBS_16K E1000_PBA_16K @@ -356,12 +358,13 @@ /* Interrupt Cause Read */ #define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */ #define E1000_ICR_LSC 0x00000004 /* Link Status Change */ -#define E1000_ICR_RXSEQ 0x00000008 /* rx sequence error */ -#define E1000_ICR_RXDMT0 0x00000010 /* rx desc min. threshold (0) */ -#define E1000_ICR_RXT0 0x00000080 /* rx timer intr (ring 0) */ +#define E1000_ICR_RXSEQ 0x00000008 /* Rx sequence error */ +#define E1000_ICR_RXDMT0 0x00000010 /* Rx desc min. threshold (0) */ +#define E1000_ICR_RXT0 0x00000080 /* Rx timer intr (ring 0) */ #define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver should claim the interrupt */ -/* This defines the bits that are set in the Interrupt Mask +/* + * This defines the bits that are set in the Interrupt Mask * Set/Read Register. Each bit is documented below: * o RXT0 = Receiver Timer Interrupt (ring 0) * o TXDW = Transmit Descriptor Written Back @@ -379,21 +382,22 @@ /* Interrupt Mask Set */ #define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */ #define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */ -#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */ -#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */ -#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* rx timer intr */ +#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */ +#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */ +#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* Rx timer intr */ /* Interrupt Cause Set */ #define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */ #define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */ +#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */ /* Transmit Descriptor Control */ #define E1000_TXDCTL_PTHRESH 0x0000003F /* TXDCTL Prefetch Threshold */ #define E1000_TXDCTL_WTHRESH 0x003F0000 /* TXDCTL Writeback Threshold */ #define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */ #define E1000_TXDCTL_MAX_TX_DESC_PREFETCH 0x0100001F /* GRAN=1, PTHRESH=31 */ -#define E1000_TXDCTL_COUNT_DESC 0x00400000 /* Enable the counting of desc. - still to be processed. */ +/* Enable the counting of desc. still to be processed. */ +#define E1000_TXDCTL_COUNT_DESC 0x00400000 /* Flow Control Constants */ #define FLOW_CONTROL_ADDRESS_LOW 0x00C28001 @@ -404,7 +408,8 @@ #define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */ /* Receive Address */ -/* Number of high/low register pairs in the RAR. The RAR (Receive Address +/* + * Number of high/low register pairs in the RAR. The RAR (Receive Address * Registers) holds the directed and multicast addresses that we monitor. * Technically, we have 16 spots. However, we reserve one of these spots * (RAR[15]) for our directed address used by controllers with @@ -533,8 +538,8 @@ #define E1000_EECD_REQ 0x00000040 /* NVM Access Request */ #define E1000_EECD_GNT 0x00000080 /* NVM Access Grant */ #define E1000_EECD_SIZE 0x00000200 /* NVM Size (0=64 word 1=256 word) */ -#define E1000_EECD_ADDR_BITS 0x00000400 /* NVM Addressing bits based on type - * (0-small, 1-large) */ +/* NVM Addressing bits based on type (0-small, 1-large) */ +#define E1000_EECD_ADDR_BITS 0x00000400 #define E1000_NVM_GRANT_ATTEMPTS 1000 /* NVM # attempts to gain grant */ #define E1000_EECD_AUTO_RD 0x00000200 /* NVM Auto Read done */ #define E1000_EECD_SIZE_EX_MASK 0x00007800 /* NVM Size */ @@ -626,7 +631,8 @@ #define MAX_PHY_MULTI_PAGE_REG 0xF /* Bit definitions for valid PHY IDs. */ -/* I = Integrated +/* + * I = Integrated * E = External */ #define M88E1000_E_PHY_ID 0x01410C50 @@ -653,37 +659,37 @@ #define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5 */ /* Manual MDI configuration */ #define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */ -#define M88E1000_PSCR_AUTO_X_1000T 0x0040 /* 1000BASE-T: Auto crossover, - * 100BASE-TX/10BASE-T: - * MDI Mode - */ -#define M88E1000_PSCR_AUTO_X_MODE 0x0060 /* Auto crossover enabled - * all speeds. - */ - /* 1=Enable Extended 10BASE-T distance - * (Lower 10BASE-T RX Threshold) - * 0=Normal 10BASE-T RX Threshold */ - /* 1=5-Bit interface in 100BASE-TX - * 0=MII interface in 100BASE-TX */ -#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */ +/* 1000BASE-T: Auto crossover, 100BASE-TX/10BASE-T: MDI Mode */ +#define M88E1000_PSCR_AUTO_X_1000T 0x0040 +/* Auto crossover enabled all speeds */ +#define M88E1000_PSCR_AUTO_X_MODE 0x0060 +/* + * 1=Enable Extended 10BASE-T distance (Lower 10BASE-T Rx Threshold) + * 0=Normal 10BASE-T Rx Threshold + */ +#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */ /* M88E1000 PHY Specific Status Register */ #define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */ #define M88E1000_PSSR_DOWNSHIFT 0x0020 /* 1=Downshifted */ #define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */ -#define M88E1000_PSSR_CABLE_LENGTH 0x0380 /* 0=<50M;1=50-80M;2=80-110M; - * 3=110-140M;4=>140M */ +/* 0=<50M; 1=50-80M; 2=80-110M; 3=110-140M; 4=>140M */ +#define M88E1000_PSSR_CABLE_LENGTH 0x0380 #define M88E1000_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */ #define M88E1000_PSSR_1000MBS 0x8000 /* 10=1000Mbs */ #define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7 -/* Number of times we will attempt to autonegotiate before downshifting if we - * are the master */ +/* + * Number of times we will attempt to autonegotiate before downshifting if we + * are the master + */ #define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00 #define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X 0x0000 -/* Number of times we will attempt to autonegotiate before downshifting if we - * are the slave */ +/* + * Number of times we will attempt to autonegotiate before downshifting if we + * are the slave + */ #define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK 0x0300 #define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X 0x0100 #define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */ @@ -692,7 +698,8 @@ #define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK 0x0E00 #define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X 0x0800 -/* Bits... +/* + * Bits... * 15-5: page * 4-0: register offset */ diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index 327c0620da3..5a89dff5226 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2007 Intel Corporation. + Copyright(c) 1999 - 2008 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -61,7 +61,7 @@ struct e1000_info; ndev_printk(KERN_NOTICE , netdev, format, ## arg) -/* TX/RX descriptor defines */ +/* Tx/Rx descriptor defines */ #define E1000_DEFAULT_TXD 256 #define E1000_MAX_TXD 4096 #define E1000_MIN_TXD 80 @@ -114,13 +114,13 @@ struct e1000_buffer { dma_addr_t dma; struct sk_buff *skb; union { - /* TX */ + /* Tx */ struct { unsigned long time_stamp; u16 length; u16 next_to_watch; }; - /* RX */ + /* Rx */ /* arrays of page information for packet split */ struct e1000_ps_page *ps_pages; }; @@ -167,9 +167,6 @@ struct e1000_adapter { spinlock_t tx_queue_lock; /* prevent concurrent tail updates */ - /* this is still needed for 82571 and above */ - atomic_t irq_sem; - /* track device up/down/testing state */ unsigned long state; @@ -180,7 +177,7 @@ struct e1000_adapter { u16 rx_itr; /* - * TX + * Tx */ struct e1000_ring *tx_ring /* One per active queue */ ____cacheline_aligned_in_smp; @@ -202,7 +199,7 @@ struct e1000_adapter { unsigned int total_rx_bytes; unsigned int total_rx_packets; - /* TX stats */ + /* Tx stats */ u64 tpt_old; u64 colc_old; u64 gotcl_old; @@ -214,7 +211,7 @@ struct e1000_adapter { u32 tx_dma_failed; /* - * RX + * Rx */ bool (*clean_rx) (struct e1000_adapter *adapter, int *work_done, int work_to_do) @@ -226,7 +223,7 @@ struct e1000_adapter { u32 rx_int_delay; u32 rx_abs_int_delay; - /* RX stats */ + /* Rx stats */ u64 hw_csum_err; u64 hw_csum_good; u64 rx_hdr_split; @@ -237,6 +234,8 @@ struct e1000_adapter { unsigned int rx_ps_pages; u16 rx_ps_bsize0; + u32 max_frame_size; + u32 min_frame_size; /* OS defined structs */ struct net_device *netdev; @@ -261,7 +260,7 @@ struct e1000_adapter { u32 wol; u32 pba; - u8 fc_autoneg; + bool fc_autoneg; unsigned long led_status; @@ -272,7 +271,7 @@ struct e1000_info { enum e1000_mac_type mac; unsigned int flags; u32 pba; - s32 (*get_invariants)(struct e1000_adapter *); + s32 (*get_variants)(struct e1000_adapter *); struct e1000_mac_operations *mac_ops; struct e1000_phy_operations *phy_ops; struct e1000_nvm_operations *nvm_ops; @@ -308,6 +307,7 @@ struct e1000_info { #define FLAG_MSI_ENABLED (1 << 27) #define FLAG_RX_CSUM_ENABLED (1 << 28) #define FLAG_TSO_FORCE (1 << 29) +#define FLAG_RX_RESTART_NOW (1 << 30) #define E1000_RX_DESC_PS(R, i) \ (&(((union e1000_rx_desc_packet_split *)((R).desc))[i])) @@ -357,7 +357,7 @@ extern struct e1000_info e1000_ich8_info; extern struct e1000_info e1000_ich9_info; extern struct e1000_info e1000_es2_info; -extern s32 e1000e_read_part_num(struct e1000_hw *hw, u32 *part_num); +extern s32 e1000e_read_pba_num(struct e1000_hw *hw, u32 *pba_num); extern s32 e1000e_commit_phy(struct e1000_hw *hw); @@ -390,9 +390,11 @@ extern s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw); extern s32 e1000e_setup_link(struct e1000_hw *hw); extern void e1000e_clear_vfta(struct e1000_hw *hw); extern void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count); -extern void e1000e_mc_addr_list_update_generic(struct e1000_hw *hw, - u8 *mc_addr_list, u32 mc_addr_count, - u32 rar_used_count, u32 rar_count); +extern void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw, + u8 *mc_addr_list, + u32 mc_addr_count, + u32 rar_used_count, + u32 rar_count); extern void e1000e_rar_set(struct e1000_hw *hw, u8 *addr, u32 index); extern s32 e1000e_set_fc_watermarks(struct e1000_hw *hw); extern void e1000e_set_pcie_no_snoop(struct e1000_hw *hw, u32 no_snoop); @@ -462,7 +464,6 @@ extern s32 e1000e_acquire_nvm(struct e1000_hw *hw); extern s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); extern s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw); extern s32 e1000e_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg); -extern s32 e1000e_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); extern s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); extern s32 e1000e_validate_nvm_checksum_generic(struct e1000_hw *hw); extern void e1000e_release_nvm(struct e1000_hw *hw); diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c index 88657adf965..d59a99ae44b 100644 --- a/drivers/net/e1000e/es2lan.c +++ b/drivers/net/e1000e/es2lan.c @@ -1,7 +1,7 @@ /******************************************************************************* |