diff options
Diffstat (limited to 'drivers/net/e1000e/ich8lan.c')
-rw-r--r-- | drivers/net/e1000e/ich8lan.c | 448 |
1 files changed, 423 insertions, 25 deletions
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 6d1aab6316b..9e23f50fb9c 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -48,6 +48,10 @@ * 82567LF-3 Gigabit Network Connection * 82567LM-3 Gigabit Network Connection * 82567LM-4 Gigabit Network Connection + * 82577LM Gigabit Network Connection + * 82577LC Gigabit Network Connection + * 82578DM Gigabit Network Connection + * 82578DC Gigabit Network Connection */ #include <linux/netdevice.h> @@ -116,6 +120,8 @@ #define IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK 0x0300 #define IGP3_VR_CTRL_MODE_SHUTDOWN 0x0200 +#define HV_LED_CONFIG PHY_REG(768, 30) /* LED Configuration */ + /* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */ /* Offset 04h HSFSTS */ union ich8_hws_flash_status { @@ -186,6 +192,14 @@ static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw); static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw); static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw); +static s32 e1000_cleanup_led_ich8lan(struct e1000_hw *hw); +static s32 e1000_led_on_ich8lan(struct e1000_hw *hw); +static s32 e1000_led_off_ich8lan(struct e1000_hw *hw); +static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw); +static s32 e1000_setup_led_pchlan(struct e1000_hw *hw); +static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw); +static s32 e1000_led_on_pchlan(struct e1000_hw *hw); +static s32 e1000_led_off_pchlan(struct e1000_hw *hw); static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg) { @@ -213,6 +227,41 @@ static inline void __ew32flash(struct e1000_hw *hw, unsigned long reg, u32 val) #define ew32flash(reg,val) __ew32flash(hw, (reg), (val)) /** + * e1000_init_phy_params_pchlan - Initialize PHY function pointers + * @hw: pointer to the HW structure + * + * Initialize family-specific PHY parameters and function pointers. + **/ +static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val = 0; + + phy->addr = 1; + phy->reset_delay_us = 100; + + phy->ops.check_polarity = e1000_check_polarity_ife_ich8lan; + phy->ops.read_phy_reg = e1000_read_phy_reg_hv; + phy->ops.write_phy_reg = e1000_write_phy_reg_hv; + phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; + + phy->id = e1000_phy_unknown; + e1000e_get_phy_id(hw); + phy->type = e1000e_get_phy_type_from_id(phy->id); + + if (phy->type == e1000_phy_82577) { + phy->ops.check_polarity = e1000_check_polarity_82577; + phy->ops.force_speed_duplex = + e1000_phy_force_speed_duplex_82577; + phy->ops.get_cable_length = e1000_get_cable_length_82577; + phy->ops.get_phy_info = e1000_get_phy_info_82577; + phy->ops.commit_phy = e1000e_phy_sw_reset; + } + + return ret_val; +} + +/** * e1000_init_phy_params_ich8lan - Initialize PHY function pointers * @hw: pointer to the HW structure * @@ -273,6 +322,8 @@ static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw) break; } + phy->ops.check_polarity = e1000_check_polarity_ife_ich8lan; + return 0; } @@ -358,6 +409,36 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter) /* Set if manageability features are enabled. */ mac->arc_subsystem_valid = 1; + /* LED operations */ + switch (mac->type) { + case e1000_ich8lan: + case e1000_ich9lan: + case e1000_ich10lan: + /* ID LED init */ + mac->ops.id_led_init = e1000e_id_led_init; + /* setup LED */ + mac->ops.setup_led = e1000e_setup_led_generic; + /* cleanup LED */ + mac->ops.cleanup_led = e1000_cleanup_led_ich8lan; + /* turn on/off LED */ + mac->ops.led_on = e1000_led_on_ich8lan; + mac->ops.led_off = e1000_led_off_ich8lan; + break; + case e1000_pchlan: + /* ID LED init */ + mac->ops.id_led_init = e1000_id_led_init_pchlan; + /* setup LED */ + mac->ops.setup_led = e1000_setup_led_pchlan; + /* cleanup LED */ + mac->ops.cleanup_led = e1000_cleanup_led_pchlan; + /* turn on/off LED */ + mac->ops.led_on = e1000_led_on_pchlan; + mac->ops.led_off = e1000_led_off_pchlan; + break; + default: + break; + } + /* Enable PCS Lock-loss workaround for ICH8 */ if (mac->type == e1000_ich8lan) e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, 1); @@ -378,10 +459,18 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter) if (rc) return rc; - rc = e1000_init_phy_params_ich8lan(hw); + if (hw->mac.type == e1000_pchlan) + rc = e1000_init_phy_params_pchlan(hw); + else + rc = e1000_init_phy_params_ich8lan(hw); if (rc) return rc; + if (adapter->hw.phy.type == e1000_phy_ife) { + adapter->flags &= ~FLAG_HAS_JUMBO_FRAMES; + adapter->max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN; + } + if ((adapter->hw.mac.type == e1000_ich8lan) && (adapter->hw.phy.type == e1000_phy_igp_3)) adapter->flags |= FLAG_LSC_GIG_SPEED_DROP; @@ -410,12 +499,15 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) while (timeout) { extcnf_ctrl = er32(EXTCNF_CTRL); - extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG; - ew32(EXTCNF_CTRL, extcnf_ctrl); - extcnf_ctrl = er32(EXTCNF_CTRL); - if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG) - break; + if (!(extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG)) { + extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG; + ew32(EXTCNF_CTRL, extcnf_ctrl); + + extcnf_ctrl = er32(EXTCNF_CTRL); + if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG) + break; + } mdelay(1); timeout--; } @@ -555,6 +647,53 @@ static s32 e1000_phy_force_speed_duplex_ich8lan(struct e1000_hw *hw) } /** + * e1000_hv_phy_workarounds_ich8lan - A series of Phy workarounds to be + * done after every PHY reset. + **/ +static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw) +{ + s32 ret_val = 0; + + if (hw->mac.type != e1000_pchlan) + return ret_val; + + if (((hw->phy.type == e1000_phy_82577) && + ((hw->phy.revision == 1) || (hw->phy.revision == 2))) || + ((hw->phy.type == e1000_phy_82578) && (hw->phy.revision == 1))) { + /* Disable generation of early preamble */ + ret_val = e1e_wphy(hw, PHY_REG(769, 25), 0x4431); + if (ret_val) + return ret_val; + + /* Preamble tuning for SSC */ + ret_val = e1e_wphy(hw, PHY_REG(770, 16), 0xA204); + if (ret_val) + return ret_val; + } + + if (hw->phy.type == e1000_phy_82578) { + /* + * Return registers to default by doing a soft reset then + * writing 0x3140 to the control register. + */ + if (hw->phy.revision < 2) { + e1000e_phy_sw_reset(hw); + ret_val = e1e_wphy(hw, PHY_CONTROL, 0x3140); + } + } + + /* Select page 0 */ + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + return ret_val; + hw->phy.addr = 1; + e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0); + hw->phy.ops.release_phy(hw); + + return ret_val; +} + +/** * e1000_phy_hw_reset_ich8lan - Performs a PHY reset * @hw: pointer to the HW structure * @@ -575,6 +714,12 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw) if (ret_val) return ret_val; + if (hw->mac.type == e1000_pchlan) { + ret_val = e1000_hv_phy_workarounds_ich8lan(hw); + if (ret_val) + return ret_val; + } + /* * Initialize the PHY from the NVM on ICH platforms. This * is needed due to an issue where the NVM configuration is @@ -701,7 +846,7 @@ static s32 e1000_get_phy_info_ife_ich8lan(struct e1000_hw *hw) phy->polarity_correction = (!(data & IFE_PSC_AUTO_POLARITY_DISABLE)); if (phy->polarity_correction) { - ret_val = e1000_check_polarity_ife_ich8lan(hw); + ret_val = phy->ops.check_polarity(hw); if (ret_val) return ret_val; } else { @@ -741,6 +886,8 @@ static s32 e1000_get_phy_info_ich8lan(struct e1000_hw *hw) break; case e1000_phy_igp_3: case e1000_phy_bm: + case e1000_phy_82578: + case e1000_phy_82577: return e1000e_get_phy_info_igp(hw); break; default: @@ -1852,6 +1999,79 @@ static s32 e1000_valid_led_default_ich8lan(struct e1000_hw *hw, u16 *data) } /** + * e1000_id_led_init_pchlan - store LED configurations + * @hw: pointer to the HW structure + * + * PCH does not control LEDs via the LEDCTL register, rather it uses + * the PHY LED configuration register. + * + * PCH also does not have an "always on" or "always off" mode which + * complicates the ID feature. Instead of using the "on" mode to indicate + * in ledctl_mode2 the LEDs to use for ID (see e1000e_id_led_init()), + * use "link_up" mode. The LEDs will still ID on request if there is no + * link based on logic in e1000_led_[on|off]_pchlan(). + **/ +static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + s32 ret_val; + const u32 ledctl_on = E1000_LEDCTL_MODE_LINK_UP; + const u32 ledctl_off = E1000_LEDCTL_MODE_LINK_UP | E1000_PHY_LED0_IVRT; + u16 data, i, temp, shift; + + /* Get default ID LED modes */ + ret_val = hw->nvm.ops.valid_led_default(hw, &data); + if (ret_val) + goto out; + + mac->ledctl_default = er32(LEDCTL); + mac->ledctl_mode1 = mac->ledctl_default; + mac->ledctl_mode2 = mac->ledctl_default; + + for (i = 0; i < 4; i++) { + temp = (data >> (i << 2)) & E1000_LEDCTL_LED0_MODE_MASK; + shift = (i * 5); + switch (temp) { + case ID_LED_ON1_DEF2: + case ID_LED_ON1_ON2: + case ID_LED_ON1_OFF2: + mac->ledctl_mode1 &= ~(E1000_PHY_LED0_MASK << shift); + mac->ledctl_mode1 |= (ledctl_on << shift); + break; + case ID_LED_OFF1_DEF2: + case ID_LED_OFF1_ON2: + case ID_LED_OFF1_OFF2: + mac->ledctl_mode1 &= ~(E1000_PHY_LED0_MASK << shift); + mac->ledctl_mode1 |= (ledctl_off << shift); + break; + default: + /* Do nothing */ + break; + } + switch (temp) { + case ID_LED_DEF1_ON2: + case ID_LED_ON1_ON2: + case ID_LED_OFF1_ON2: + mac->ledctl_mode2 &= ~(E1000_PHY_LED0_MASK << shift); + mac->ledctl_mode2 |= (ledctl_on << shift); + break; + case ID_LED_DEF1_OFF2: + case ID_LED_ON1_OFF2: + case ID_LED_OFF1_OFF2: + mac->ledctl_mode2 &= ~(E1000_PHY_LED0_MASK << shift); + mac->ledctl_mode2 |= (ledctl_off << shift); + break; + default: + /* Do nothing */ + break; + } + } + +out: + return ret_val; +} + +/** * e1000_get_bus_info_ich8lan - Get/Set the bus type and width * @hw: pointer to the HW structure * @@ -1960,6 +2180,9 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) kab |= E1000_KABGTXD_BGSQLBIAS; ew32(KABGTXD, kab); + if (hw->mac.type == e1000_pchlan) + ret_val = e1000_hv_phy_workarounds_ich8lan(hw); + return ret_val; } @@ -1985,7 +2208,7 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw) e1000_initialize_hw_bits_ich8lan(hw); /* Initialize identification LED */ - ret_val = e1000e_id_led_init(hw); + ret_val = mac->ops.id_led_init(hw); if (ret_val) { hw_dbg(hw, "Error initializing identification LED\n"); return ret_val; @@ -2031,6 +2254,16 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw) ew32(CTRL_EXT, ctrl_ext); /* + * The 82578 Rx buffer will stall if wakeup is enabled in host and + * the ME. Reading the BM_WUC register will clear the host wakeup bit. + * Reset the phy after disabling host wakeup to reset the Rx buffer. + */ + if (hw->phy.type == e1000_phy_82578) { + e1e_rphy(hw, BM_WUC, &i); + e1000e_phy_hw_reset_generic(hw); + } + + /* * Clear all of the statistics registers (clear on read). It is * important that we do this after we have tried to establish link * because the symbol error count will increment wildly if there @@ -2054,6 +2287,9 @@ static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw) /* Extended Device Control */ reg = er32(CTRL_EXT); reg |= (1 << 22); + /* Enable PHY low-power state when MAC is at D3 w/o WoL */ + if (hw->mac.type >= e1000_pchlan) + reg |= E1000_CTRL_EXT_PHYPDEN; ew32(CTRL_EXT, reg); /* Transmit Descriptor Control 0 */ @@ -2112,8 +2348,13 @@ static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw) * the default flow control setting, so we explicitly * set it to full. */ - if (hw->fc.requested_mode == e1000_fc_default) - hw->fc.requested_mode = e1000_fc_full; + if (hw->fc.requested_mode == e1000_fc_default) { + /* Workaround h/w hang when Tx flow control enabled */ + if (hw->mac.type == e1000_pchlan) + hw->fc.requested_mode = e1000_fc_rx_pause; + else + hw->fc.requested_mode = e1000_fc_full; + } /* * Save off the requested flow control mode for use later. Depending @@ -2130,6 +2371,14 @@ static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw) return ret_val; ew32(FCTTV, hw->fc.pause_time); + if ((hw->phy.type == e1000_phy_82578) || + (hw->phy.type == e1000_phy_82577)) { + ret_val = hw->phy.ops.write_phy_reg(hw, + PHY_REG(BM_PORT_CTRL_PAGE, 27), + hw->fc.pause_time); + if (ret_val) + return ret_val; + } return e1000e_set_fc_watermarks(hw); } @@ -2169,18 +2418,26 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw) if (ret_val) return ret_val; - if (hw->phy.type == e1000_phy_igp_3) { + switch (hw->phy.type) { + case e1000_phy_igp_3: ret_val = e1000e_copper_link_setup_igp(hw); if (ret_val) return ret_val; - } else if (hw->phy.type == e1000_phy_bm) { + break; + case e1000_phy_bm: + case e1000_phy_82578: ret_val = e1000e_copper_link_setup_m88(hw); if (ret_val) return ret_val; - } - - if (hw->phy.type == e1000_phy_ife) { - ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, ®_data); + break; + case e1000_phy_82577: + ret_val = e1000_copper_link_setup_82577(hw); + if (ret_val) + return ret_val; + break; + case e1000_phy_ife: + ret_val = hw->phy.ops.read_phy_reg(hw, IFE_PHY_MDIX_CONTROL, + ®_data); if (ret_val) return ret_val; @@ -2198,9 +2455,13 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw) reg_data |= IFE_PMC_AUTO_MDIX; break; } - ret_val = e1e_wphy(hw, IFE_PHY_MDIX_CONTROL, reg_data); + ret_val = hw->phy.ops.write_phy_reg(hw, IFE_PHY_MDIX_CONTROL, + reg_data); if (ret_val) return ret_val; + break; + default: + break; } return e1000e_setup_copper_link(hw); } @@ -2417,18 +2678,26 @@ void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw) * 'LPLU Enabled' and 'Gig Disable' to force link speed negotiation * to a lower speed. * - * Should only be called for ICH9 and ICH10 devices. + * Should only be called for applicable parts. **/ void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw) { u32 phy_ctrl; - if ((hw->mac.type == e1000_ich10lan) || - (hw->mac.type == e1000_ich9lan)) { + switch (hw->mac.type) { + case e1000_ich9lan: + case e1000_ich10lan: + case e1000_pchlan: phy_ctrl = er32(PHY_CTRL); phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU | E1000_PHY_CTRL_GBE_DISABLE; ew32(PHY_CTRL, phy_ctrl); + + /* Workaround SWFLAG unexpectedly set during S0->Sx */ + if (hw->mac.type == e1000_pchlan) + udelay(500); + default: + break; } return; @@ -2482,13 +2751,99 @@ static s32 e1000_led_off_ich8lan(struct e1000_hw *hw) } /** + * e1000_setup_led_pchlan - Configures SW controllable LED + * @hw: pointer to the HW structure + * + * This prepares the SW controllable LED for use. + **/ +static s32 e1000_setup_led_pchlan(struct e1000_hw *hw) +{ + return hw->phy.ops.write_phy_reg(hw, HV_LED_CONFIG, + (u16)hw->mac.ledctl_mode1); +} + +/** + * e1000_cleanup_led_pchlan - Restore the default LED operation + * @hw: pointer to the HW structure + * + * Return the LED back to the default configuration. + **/ +static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw) +{ + return hw->phy.ops.write_phy_reg(hw, HV_LED_CONFIG, + (u16)hw->mac.ledctl_default); +} + +/** + * e1000_led_on_pchlan - Turn LEDs on + * @hw: pointer to the HW structure + * + * Turn on the LEDs. + **/ +static s32 e1000_led_on_pchlan(struct e1000_hw *hw) +{ + u16 data = (u16)hw->mac.ledctl_mode2; + u32 i, led; + + /* + * If no link, then turn LED on by setting the invert bit + * for each LED that's mode is "link_up" in ledctl_mode2. + */ + if (!(er32(STATUS) & E1000_STATUS_LU)) { + for (i = 0; i < 3; i++) { + led = (data >> (i * 5)) & E1000_PHY_LED0_MASK; + if ((led & E1000_PHY_LED0_MODE_MASK) != + E1000_LEDCTL_MODE_LINK_UP) + continue; + if (led & E1000_PHY_LED0_IVRT) + data &= ~(E1000_PHY_LED0_IVRT << (i * 5)); + else + data |= (E1000_PHY_LED0_IVRT << (i * 5)); + } + } + + return hw->phy.ops.write_phy_reg(hw, HV_LED_CONFIG, data); +} + +/** + * e1000_led_off_pchlan - Turn LEDs off + * @hw: pointer to the HW structure + * + * Turn off the LEDs. + **/ +static s32 e1000_led_off_pchlan(struct e1000_hw *hw) +{ + u16 data = (u16)hw->mac.ledctl_mode1; + u32 i, led; + + /* + * If no link, then turn LED off by clearing the invert bit + * for each LED that's mode is "link_up" in ledctl_mode1. + */ + if (!(er32(STATUS) & E1000_STATUS_LU)) { + for (i = 0; i < 3; i++) { + led = (data >> (i * 5)) & E1000_PHY_LED0_MASK; + if ((led & E1000_PHY_LED0_MODE_MASK) != + E1000_LEDCTL_MODE_LINK_UP) + continue; + if (led & E1000_PHY_LED0_IVRT) + data &= ~(E1000_PHY_LED0_IVRT << (i * 5)); + else + data |= (E1000_PHY_LED0_IVRT << (i * 5)); + } + } + + return hw->phy.ops.write_phy_reg(hw, HV_LED_CONFIG, data); +} + +/** * e1000_get_cfg_done_ich8lan - Read config done bit * @hw: pointer to the HW structure * * Read the management control register for the config done bit for * completion status. NOTE: silicon which is EEPROM-less will fail trying * to read the config done bit, so an error is *ONLY* logged and returns - * E1000_SUCCESS. If we were to return with error, EEPROM-less silicon + * 0. If we were to return with error, EEPROM-less silicon * would not be able to be reset or change link. **/ static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw) @@ -2498,7 +2853,8 @@ static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw) e1000e_get_cfg_done(hw); /* If EEPROM is not marked present, init the IGP 3 PHY manually */ - if (hw->mac.type != e1000_ich10lan) { + if ((hw->mac.type != e1000_ich10lan) && + (hw->mac.type != e1000_pchlan)) { if (((er32(EECD) & E1000_EECD_PRES) == 0) && (hw->phy.type == e1000_phy_igp_3)) { e1000e_phy_init_script_igp3(hw); @@ -2524,6 +2880,7 @@ static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw) static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw) { u32 temp; + u16 phy_data; e1000e_clear_hw_cntrs_base(hw); @@ -2541,22 +2898,42 @@ static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw) temp = er32(IAC); temp = er32(ICRXOC); + /* Clear PHY statistics registers */ + if ((hw->phy.type == e1000_phy_82578) || + (hw->phy.type == e1000_phy_82577)) { + hw->phy.ops.read_phy_reg(hw, HV_SCC_UPPER, &phy_data); + hw->phy.ops.read_phy_reg(hw, HV_SCC_LOWER, &phy_data); + hw->phy.ops.read_phy_reg(hw, HV_ECOL_UPPER, &phy_data); + hw->phy.ops.read_phy_reg(hw, HV_ECOL_LOWER, &phy_data); + hw->phy.ops.read_phy_reg(hw, HV_MCC_UPPER, &phy_data); + hw->phy.ops.read_phy_reg(hw, HV_MCC_LOWER, &phy_data); + hw->phy.ops.read_phy_reg(hw, HV_LATECOL_UPPER, &phy_data); + hw->phy.ops.read_phy_reg(hw, HV_LATECOL_LOWER, &phy_data); + hw->phy.ops.read_phy_reg(hw, HV_COLC_UPPER, &phy_data); + hw->phy.ops.read_phy_reg(hw, HV_COLC_LOWER, &phy_data); + hw->phy.ops.read_phy_reg(hw, HV_DC_UPPER, &phy_data); + hw->phy.ops.read_phy_reg(hw, HV_DC_LOWER, &phy_data); + hw->phy.ops.read_phy_reg(hw, HV_TNCRS_UPPER, &phy_data); + hw->phy.ops.read_phy_reg(hw, HV_TNCRS_LOWER, &phy_data); + } } static struct e1000_mac_operations ich8_mac_ops = { + .id_led_init = e1000e_id_led_init, .check_mng_mode = e1000_check_mng_mode_ich8lan, .check_for_link = e1000e_check_for_copper_link, - .cleanup_led = e1000_cleanup_led_ich8lan, + /* cleanup_led dependent on mac type */ .clear_hw_cntrs = e1000_clear_hw_cntrs_ich8lan, .get_bus_info = e1000_get_bus_info_ich8lan, .get_link_up_info = e1000_get_link_up_info_ich8lan, - .led_on = e1000_led_on_ich8lan, - .led_off = e1000_led_off_ich8lan, + /* led_on dependent on mac type */ + /* led_off dependent on mac type */ .update_mc_addr_list = e1000e_update_mc_addr_list_generic, .reset_hw = e1000_reset_hw_ich8lan, .init_hw = e1000_init_hw_ich8lan, .setup_link = e1000_setup_link_ich8lan, .setup_physical_interface= e1000_setup_copper_link_ich8lan, + /* id_led_init dependent on mac type */ }; static struct e1000_phy_operations ich8_phy_ops = { @@ -2595,6 +2972,7 @@ struct e1000_info e1000_ich8_info = { | FLAG_HAS_FLASH | FLAG_APME_IN_WUC, .pba = 8, + .max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN, .get_variants = e1000_get_variants_ich8lan, .mac_ops = &ich8_mac_ops, .phy_ops = &ich8_phy_ops, @@ -2613,6 +2991,7 @@ struct e1000_info e1000_ich9_info = { | FLAG_HAS_FLASH | FLAG_APME_IN_WUC, .pba = 10, + .max_hw_frame_size = DEFAULT_JUMBO, .get_variants = e1000_get_variants_ich8lan, .mac_ops = &ich8_mac_ops, .phy_ops = &ich8_phy_ops, @@ -2631,6 +3010,25 @@ struct e1000_info e1000_ich10_info = { | FLAG_HAS_FLASH | FLAG_APME_IN_WUC, .pba = 10, + .max_hw_frame_size = DEFAULT_JUMBO, + .get_variants = e1000_get_variants_ich8lan, + .mac_ops = &ich8_mac_ops, + .phy_ops = &ich8_phy_ops, + .nvm_ops = &ich8_nvm_ops, +}; + +struct e1000_info e1000_pch_info = { + .mac = e1000_pchlan, + .flags = FLAG_IS_ICH + | FLAG_HAS_WOL + | FLAG_RX_CSUM_ENABLED + | FLAG_HAS_CTRLEXT_ON_LOAD + | FLAG_HAS_AMT + | FLAG_HAS_FLASH + | FLAG_HAS_JUMBO_FRAMES + | FLAG_APME_IN_WUC, + .pba = 26, + .max_hw_frame_size = 4096, .get_variants = e1000_get_variants_ich8lan, .mac_ops = &ich8_mac_ops, .phy_ops = &ich8_phy_ops, |