aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/e1000
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/e1000')
-rw-r--r--drivers/net/e1000/e1000.h1
-rw-r--r--drivers/net/e1000/e1000_ethtool.c2
-rw-r--r--drivers/net/e1000/e1000_main.c70
3 files changed, 9 insertions, 64 deletions
diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index 689f158a469..dd4b728ac4b 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -337,7 +337,6 @@ struct e1000_adapter {
struct e1000_rx_ring test_rx_ring;
- uint32_t *config_space;
int msg_enable;
#ifdef CONFIG_PCI_MSI
boolean_t have_msi;
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index 44ebc72962d..6777887295f 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -166,7 +166,7 @@ e1000_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
ecmd->transceiver = XCVR_EXTERNAL;
}
- if (netif_carrier_ok(adapter->netdev)) {
+ if (E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_LU) {
e1000_get_speed_and_duplex(hw, &adapter->link_speed,
&adapter->link_duplex);
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 619c89218b4..a71023741c3 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -1417,10 +1417,6 @@ e1000_open(struct net_device *netdev)
if ((err = e1000_setup_all_rx_resources(adapter)))
goto err_setup_rx;
- err = e1000_request_irq(adapter);
- if (err)
- goto err_req_irq;
-
e1000_power_up_phy(adapter);
if ((err = e1000_up(adapter)))
@@ -1431,6 +1427,10 @@ e1000_open(struct net_device *netdev)
e1000_update_mng_vlan(adapter);
}
+ err = e1000_request_irq(adapter);
+ if (err)
+ goto err_req_irq;
+
/* If AMT is enabled, let the firmware know that the network
* interface is now open */
if (adapter->hw.mac_type == e1000_82573 &&
@@ -1439,10 +1439,10 @@ e1000_open(struct net_device *netdev)
return E1000_SUCCESS;
+err_req_irq:
+ e1000_down(adapter);
err_up:
e1000_power_down_phy(adapter);
- e1000_free_irq(adapter);
-err_req_irq:
e1000_free_all_rx_resources(adapter);
err_setup_rx:
e1000_free_all_tx_resources(adapter);
@@ -5071,58 +5071,6 @@ e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx)
return 0;
}
-#ifdef CONFIG_PM
-/* Save/restore 16 or 64 dwords of PCI config space depending on which
- * bus we're on (PCI(X) vs. PCI-E)
- */
-#define PCIE_CONFIG_SPACE_LEN 256
-#define PCI_CONFIG_SPACE_LEN 64
-static int
-e1000_pci_save_state(struct e1000_adapter *adapter)
-{
- struct pci_dev *dev = adapter->pdev;
- int size;
- int i;
-
- if (adapter->hw.mac_type >= e1000_82571)
- size = PCIE_CONFIG_SPACE_LEN;
- else
- size = PCI_CONFIG_SPACE_LEN;
-
- WARN_ON(adapter->config_space != NULL);
-
- adapter->config_space = kmalloc(size, GFP_KERNEL);
- if (!adapter->config_space) {
- DPRINTK(PROBE, ERR, "unable to allocate %d bytes\n", size);
- return -ENOMEM;
- }
- for (i = 0; i < (size / 4); i++)
- pci_read_config_dword(dev, i * 4, &adapter->config_space[i]);
- return 0;
-}
-
-static void
-e1000_pci_restore_state(struct e1000_adapter *adapter)
-{
- struct pci_dev *dev = adapter->pdev;
- int size;
- int i;
-
- if (adapter->config_space == NULL)
- return;
-
- if (adapter->hw.mac_type >= e1000_82571)
- size = PCIE_CONFIG_SPACE_LEN;
- else
- size = PCI_CONFIG_SPACE_LEN;
- for (i = 0; i < (size / 4); i++)
- pci_write_config_dword(dev, i * 4, adapter->config_space[i]);
- kfree(adapter->config_space);
- adapter->config_space = NULL;
- return;
-}
-#endif /* CONFIG_PM */
-
static int
e1000_suspend(struct pci_dev *pdev, pm_message_t state)
{
@@ -5142,9 +5090,7 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state)
}
#ifdef CONFIG_PM
- /* Implement our own version of pci_save_state(pdev) because pci-
- * express adapters have 256-byte config spaces. */
- retval = e1000_pci_save_state(adapter);
+ retval = pci_save_state(pdev);
if (retval)
return retval;
#endif
@@ -5231,7 +5177,7 @@ e1000_resume(struct pci_dev *pdev)
uint32_t err;
pci_set_power_state(pdev, PCI_D0);
- e1000_pci_restore_state(adapter);
+ pci_restore_state(pdev);
if ((err = pci_enable_device(pdev))) {
printk(KERN_ERR "e1000: Cannot enable PCI device from suspend\n");
return err;