diff options
Diffstat (limited to 'drivers/net/e1000/e1000_main.c')
-rw-r--r-- | drivers/net/e1000/e1000_main.c | 96 |
1 files changed, 45 insertions, 51 deletions
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index e7c8951f47f..cf39473ef90 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -37,8 +37,8 @@ static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver"; #define DRIVERNAPI "-NAPI" #endif #define DRV_VERSION "7.3.20-k2"DRIVERNAPI -char e1000_driver_version[] = DRV_VERSION; -static char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation."; +const char e1000_driver_version[] = DRV_VERSION; +static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation."; /* e1000_pci_tbl - PCI Device ID Table * @@ -166,7 +166,7 @@ static irqreturn_t e1000_intr_msi(int irq, void *data); static boolean_t e1000_clean_tx_irq(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring); #ifdef CONFIG_E1000_NAPI -static int e1000_clean(struct net_device *poll_dev, int *budget); +static int e1000_clean(struct napi_struct *napi, int budget); static boolean_t e1000_clean_rx_irq(struct e1000_adapter *adapter, struct e1000_rx_ring *rx_ring, int *work_done, int work_to_do); @@ -188,7 +188,6 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter, static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd); static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd); -void e1000_set_ethtool_ops(struct net_device *netdev); static void e1000_enter_82542_rst(struct e1000_adapter *adapter); static void e1000_leave_82542_rst(struct e1000_adapter *adapter); static void e1000_tx_timeout(struct net_device *dev); @@ -213,8 +212,6 @@ static void e1000_shutdown(struct pci_dev *pdev); static void e1000_netpoll (struct net_device *netdev); #endif -extern void e1000_check_options(struct e1000_adapter *adapter); - #define COPYBREAK_DEFAULT 256 static unsigned int copybreak __read_mostly = COPYBREAK_DEFAULT; module_param(copybreak, uint, 0644); @@ -545,7 +542,7 @@ int e1000_up(struct e1000_adapter *adapter) clear_bit(__E1000_DOWN, &adapter->flags); #ifdef CONFIG_E1000_NAPI - netif_poll_enable(adapter->netdev); + napi_enable(&adapter->napi); #endif e1000_irq_enable(adapter); @@ -634,7 +631,7 @@ e1000_down(struct e1000_adapter *adapter) set_bit(__E1000_DOWN, &adapter->flags); #ifdef CONFIG_E1000_NAPI - netif_poll_disable(netdev); + napi_disable(&adapter->napi); #endif e1000_irq_disable(adapter); @@ -872,6 +869,8 @@ e1000_probe(struct pci_dev *pdev, int i, err, pci_using_dac; uint16_t eeprom_data = 0; uint16_t eeprom_apme_mask = E1000_EEPROM_APME; + DECLARE_MAC_BUF(mac); + if ((err = pci_enable_device(pdev))) return err; @@ -897,7 +896,6 @@ e1000_probe(struct pci_dev *pdev, if (!netdev) goto err_alloc_etherdev; - SET_MODULE_OWNER(netdev); SET_NETDEV_DEV(netdev, &pdev->dev); pci_set_drvdata(pdev, netdev); @@ -936,8 +934,7 @@ e1000_probe(struct pci_dev *pdev, netdev->tx_timeout = &e1000_tx_timeout; netdev->watchdog_timeo = 5 * HZ; #ifdef CONFIG_E1000_NAPI - netdev->poll = &e1000_clean; - netdev->weight = 64; + netif_napi_add(netdev, &adapter->napi, e1000_clean, 64); #endif netdev->vlan_rx_register = e1000_vlan_rx_register; netdev->vlan_rx_add_vid = e1000_vlan_rx_add_vid; @@ -1134,8 +1131,7 @@ e1000_probe(struct pci_dev *pdev, "32-bit")); } - for (i = 0; i < 6; i++) - printk("%2.2x%c", netdev->dev_addr[i], i == 5 ? '\n' : ':'); + printk("%s\n", print_mac(mac, netdev->dev_addr)); /* reset the hardware with the new settings */ e1000_reset(adapter); @@ -1151,9 +1147,6 @@ e1000_probe(struct pci_dev *pdev, /* tell the stack to leave us alone until e1000_open() is called */ netif_carrier_off(netdev); netif_stop_queue(netdev); -#ifdef CONFIG_E1000_NAPI - netif_poll_disable(netdev); -#endif strcpy(netdev->name, "eth%d"); if ((err = register_netdev(netdev))) @@ -1222,12 +1215,13 @@ e1000_remove(struct pci_dev *pdev) * would have already happened in close and is redundant. */ e1000_release_hw_control(adapter); - unregister_netdev(netdev); #ifdef CONFIG_E1000_NAPI for (i = 0; i < adapter->num_rx_queues; i++) dev_put(&adapter->polling_netdev[i]); #endif + unregister_netdev(netdev); + if (!e1000_check_phy_reset_block(&adapter->hw)) e1000_phy_hw_reset(&adapter->hw); @@ -1325,8 +1319,6 @@ e1000_sw_init(struct e1000_adapter *adapter) #ifdef CONFIG_E1000_NAPI for (i = 0; i < adapter->num_rx_queues; i++) { adapter->polling_netdev[i].priv = adapter; - adapter->polling_netdev[i].poll = &e1000_clean; - adapter->polling_netdev[i].weight = 64; dev_hold(&adapter->polling_netdev[i]); set_bit(__LINK_STATE_START, &adapter->polling_netdev[i].state); } @@ -1443,7 +1435,7 @@ e1000_open(struct net_device *netdev) clear_bit(__E1000_DOWN, &adapter->flags); #ifdef CONFIG_E1000_NAPI - netif_poll_enable(netdev); + napi_enable(&adapter->napi); #endif e1000_irq_enable(adapter); @@ -3266,14 +3258,13 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) unsigned int first, max_per_txd = E1000_MAX_DATA_PER_TXD; unsigned int max_txd_pwr = E1000_MAX_TXD_PWR; unsigned int tx_flags = 0; - unsigned int len = skb->len; + unsigned int len = skb->len - skb->data_len; unsigned long flags; - unsigned int nr_frags = 0; - unsigned int mss = 0; + unsigned int nr_frags; + unsigned int mss; int count = 0; int tso; unsigned int f; - len -= skb->data_len; /* This goes back to the question of how to logically map a tx queue * to a flow. Right now, performance is impacted slightly negatively @@ -3307,7 +3298,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) * points to just header, pull a few bytes of payload from * frags into skb->data */ hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); - if (skb->data_len && (hdr_len == (skb->len - skb->data_len))) { + if (skb->data_len && hdr_len == len) { switch (adapter->hw.mac_type) { unsigned int pull_size; case e1000_82544: @@ -3596,7 +3587,7 @@ e1000_update_stats(struct e1000_adapter *adapter) spin_lock_irqsave(&adapter->stats_lock, flags); - /* these counters are modified from e1000_adjust_tbi_stats, + /* these counters are modified from e1000_tbi_adjust_stats, * called from the interrupt context, so they must only * be written while holding adapter->stats_lock */ @@ -3786,12 +3777,12 @@ e1000_intr_msi(int irq, void *data) } #ifdef CONFIG_E1000_NAPI - if (likely(netif_rx_schedule_prep(netdev))) { + if (likely(netif_rx_schedule_prep(netdev, &adapter->napi))) { adapter->total_tx_bytes = 0; adapter->total_tx_packets = 0; adapter->total_rx_bytes = 0; adapter->total_rx_packets = 0; - __netif_rx_schedule(netdev); + __netif_rx_schedule(netdev, &adapter->napi); } else e1000_irq_enable(adapter); #else @@ -3871,12 +3862,12 @@ e1000_intr(int irq, void *data) E1000_WRITE_REG(hw, IMC, ~0); E1000_WRITE_FLUSH(hw); } - if (likely(netif_rx_schedule_prep(netdev))) { + if (likely(netif_rx_schedule_prep(netdev, &adapter->napi))) { adapter->total_tx_bytes = 0; adapter->total_tx_packets = 0; adapter->total_rx_bytes = 0; adapter->total_rx_packets = 0; - __netif_rx_schedule(netdev); + __netif_rx_schedule(netdev, &adapter->napi); } else /* this really should not happen! if it does it is basically a * bug, but not a hard error, so enable ints and continue */ @@ -3924,10 +3915,10 @@ e1000_intr(int irq, void *data) **/ static int -e1000_clean(struct net_device *poll_dev, int *budget) +e1000_clean(struct napi_struct *napi, int budget) { - struct e1000_adapter *adapter; - int work_to_do = min(*budget, poll_dev->quota); + struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi); + struct net_device *poll_dev = adapter->netdev; int tx_cleaned = 0, work_done = 0; /* Must NOT use netdev_priv macro here. */ @@ -3948,23 +3939,19 @@ e1000_clean(struct net_device *poll_dev, int *budget) } adapter->clean_rx(adapter, &adapter->rx_ring[0], - &work_done, work_to_do); - - *budget -= work_done; - poll_dev->quota -= work_done; + &work_done, budget); /* If no Tx and not enough Rx work done, exit the polling mode */ - if ((!tx_cleaned && (work_done == 0)) || + if ((!tx_cleaned && (work_done < budget)) || !netif_running(poll_dev)) { quit_polling: if (likely(adapter->itr_setting & 3)) e1000_set_itr(adapter); - netif_rx_complete(poll_dev); + netif_rx_complete(poll_dev, napi); e1000_irq_enable(adapter); - return 0; } - return 1; + return work_done; } #endif @@ -4817,6 +4804,7 @@ e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) spin_unlock_irqrestore(&adapter->stats_lock, flags); return -EIO; } + spin_unlock_irqrestore(&adapter->stats_lock, flags); if (adapter->hw.media_type == e1000_media_type_copper) { switch (data->reg_num) { case PHY_CTRL: @@ -4837,12 +4825,8 @@ e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) DUPLEX_HALF; retval = e1000_set_spd_dplx(adapter, spddplx); - if (retval) { - spin_unlock_irqrestore( - &adapter->stats_lock, - flags); + if (retval) return retval; - } } if (netif_running(adapter->netdev)) e1000_reinit_locked(adapter); @@ -4851,11 +4835,8 @@ e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) break; case M88E1000_PHY_SPEC_CTRL: case M88E1000_EXT_PHY_SPEC_CTRL: - if (e1000_phy_reset(&adapter->hw)) { - spin_unlock_irqrestore( - &adapter->stats_lock, flags); + if (e1000_phy_reset(&adapter->hw)) return -EIO; - } break; } } else { @@ -4870,7 +4851,6 @@ e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) break; } } - spin_unlock_irqrestore(&adapter->stats_lock, flags); break; default: return -EOPNOTSUPP; @@ -4912,6 +4892,20 @@ e1000_write_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t *value) pci_write_config_word(adapter->pdev, reg, *value); } +int +e1000_pcix_get_mmrbc(struct e1000_hw *hw) +{ + struct e1000_adapter *adapter = hw->back; + return pcix_get_mmrbc(adapter->pdev); +} + +void +e1000_pcix_set_mmrbc(struct e1000_hw *hw, int mmrbc) +{ + struct e1000_adapter *adapter = hw->back; + pcix_set_mmrbc(adapter->pdev, mmrbc); +} + int32_t e1000_read_pcie_cap_reg(struct e1000_hw *hw, uint32_t reg, uint16_t *value) { |